AVS4YOU Programs Help

Transcription

AVS4YOU Help - AVS TV Box
AVS TV Box
www.avs4you.com
© Online Media Technologies, Ltd., UK. 2004 - 2009 All rights reserved
Page 2 of 34
Contact Us
If you have any comments, suggestions or questions regarding AVS4YOU programs or if you have a new feature that you feel
can be added to improve our product, please feel free to contact us.
When you register your product, you may be entitled to technical support.
General information:
info@avs4you.com
Technical support:
support@avs4you.com
Sales:
sales@avs4you.com
Help and other documentation:
help@avs4you.com
Technical Support
AVS4YOU programs do not require any professional knowledge. If you experience any problem or have a question, please refer
to the AVS4YOU Programs Help. If you cannot find the solution, please contact our support staff.
Note: only registered users receive technical support.
AVS4YOU staff provides several forms of automated customer support:

AVS4YOU Support System
You can use the Support Form on our site to ask your questions.

E-mail Support
You can also submit your technical questions and problems via e-mail to support@avs4you.com.
Note: for more effective and quick resolving of the difficulties we will need the following information:
 Name and e-mail address used for registration
 System parameters (CPU, hard drive space available, etc.)
 Operating System
 The information about the capture, video or audio devices, disc drives connected to your computer
(manufacturer and model)
 Detailed step by step describing of your action
Please do NOT attach any other files to your e-mail message unless specifically requested by AVS4YOU.com
support staff.
© Online Media Technologies Ltd., UK 2004 - 2009 All rights reserved.
www.avs4you.com
Page 3 of 34
Resources
Documentation for your AVS4YOU software is available in a variety of formats:
In-product (.chm-file) and Online Help
To reduce the size of the downloaded software installation files the in-product help was excluded from the installation although
you can always download it from our web-site for your convenience. Please, visit AVS4YOU web-site at
http://www.avs4you.com/OnlineHelp/index.aspx to download the latest available version of the help executable, run it
and install into the AVS4YOU programs folder. After that you will be able to use it through the Help menu of the installed
AVS4YOU software.
Online Help include all the content from the In-product help file and updates and links to additional instructional content
available on the web. You can find the Online Help at our web-site - http://www.avs4you.com/OnlineHelp/index.aspx.
Please note, that the most complete and up-to-date version of AVS4YOU programs help is always on the web.
PDF Documentation
The offline help is also available as a pdf-file that is optimized for printing. All PDF help files are available for download at the
programs pages at AVS4YOU web-site (both http://www.avs4you.com/index.aspx and
http://www.avs4you.com/OnlineHelp/index.aspx). To be able to read and print AVS4YOU PDF help files you will need to
have a PDF reading program installed.
User Guides
You have access to a wide variety of resources that help you make the most of your AVS4YOU software. The step-by-step user
guides will be of help not only to the novice users but also to the users that face a certain task to be performed and look for a
way to do it. Please, visit our User Guides section of AVS4YOU web-site at http://www.avs4you.com/Guides/index.aspx
to read the detailed instructions for various software and tasks
Technical Support
Visit the AVS4YOU Support web-site at http://support.avs4you.com to ask your questions concerning AVS4YOU software
installation, registration and use. Feel free to also use our e-mail address support@avs4you.com.
Downloads
Visit the Downloads section - http://www.avs4you.com/downloads.aspx - of our web-site to find free updates, tryouts,
and other useful software. We constantly update the software, new versions of the most popular programs and new software are
also frequently released.
www.avs4you.com
AVS4YOU Programs Help - AVS TV Box
Page 4 of 34
Overview
AVS TV Box is an easy to use application that will let you capture video from different devices, watch programs using analog and
digital TV tuners.
User-friendly and understandable interface allows you to enjoy working with broadcast video and capture devices without frequent
consulting with reference materials. You do not need to be a professional to use this tool. Once you get started you will be surprised
how smoothly you can combine video from different capture devices in one program and switch from one to the other in just one
mouse click. You can also record video and preview the results to make sure that you recorded what you had wanted.
There is no need to have many different programs for video capturing and television broadcast watching - multifunctional and
powerful AVS TV Box will easily deal with several tasks.
In case you need some help, please refer to this AVS4YOU Programs Help, if you cannot find something here or you need some
explanation or assistance, just e-mail us support@avs4you.com or visit us on the World Wide Web www.avs4you.com.
To start AVS TV Box go to Start menu and choose All Programs -> AVS4YOU -> Video -> AVS TV Box.
www.avs4you.com
Page 5 of 34
Main Controls
Control
Description
1
Display
Shows current time or time elapsed since the file recording or playback started and also the time
remaining for the recording, taking into account the recording settings and free space on
computer hard disk drive
2
Record button
Used to record video that is currently displayed in the main display window
3
Pause button
Used to pause the video recording and playback
4
Timeshift button
Used for timeshift video recording - pause, playback video fragments, rewind forward and backward
live video and television programs without aborting the recording
5
Channel up button
Used to advance to the next channel in the favorite list
6
Channel down
button
Used to return to the previous channel in the favorite list
7
Mastering button
Used to edit recorded files
8
Mute button
Used to mute/unmute the sound
9
Snapshot button
Used to take snapshots of the current video display image
10
Volume level
control
Used to bring the level control up and down
11
Favorites button
Used to open the Favorite window
12
Show recorded
files button
Used to open the recorded files list
Used to simultaneously view real-time video image and recorded files within the same screen (like in
picture-in-picture option in some TV models).
13
Dual-view mode
button
14
Favorite channels
surfing button
Used to show several channels from the favorite list simultaneously
15
Playback button
Used to playback the recorded files
Note: the multiviewing mode is only available when you playback recorded
files.
www.avs4you.com
Page 6 of 34
16
Navigation slider
Used to navigate through the playing file or in timeshift mode
17
Stop button
Used to stop playback and recording
18
AVS4YOU link
Used to go to the AVS4YOU Internet home page
19
Scheduling On/Off
button
Used to switch scheduling on or off. To configure scheduling use the express menu
Used to activate electronic program guide option
20
21
Electronic program
guide button
DV camera panel
activation button
Note: this button is only active if there is an EPG present in the stream.
Used to show/hide the DV camera control panel
Note: this button is only active if the device connected to your PC is a DV
(miniDV) camera.
22
Settings button
Used to open the Configuration window
23
Full screen button
Used to go to the full screen view mode
DV camera control panel
Control
Description
1
Display
Shows the current position in the DV camera recording
2
Current state
Shows the current state of the camera
3
Hide panel button
Hides the DV camera control panel
4
Slowplay backward button
Returns to the previous frame of the recording
5
Play/Pause button
Used to playback and pause the recording of the DV camera
6
Slowplay forward button
Advances to the next frame of the recording
7
Stop button
Used to stop the playback, fast forward/backward and slowplay forward/backward functions
8
Fast backward button
Lets the user search the DV camera video in fast reverse mode
9
Fast forward button
Lets the user search the DV camera video in fast forward mode
www.avs4you.com
Page 7 of 34
Express Menu
Express Menu is an easy way to access the program's main controls with just one mouse click. You can activate it by clicking the
right button of the mouse when the cursor is positioned on the video window. Express Menu buttons are grouped:
Favorites - use this option to switch between the Favorites list without the need to open the Favorites window.
Full Screen - use this option to switch to the full screen view from the windowed mode and back.
Always on Top - use this option to make the AVS TV Box program always stay on top all other programs windows.
Preview - use this option to preview or hide the image from the capture device.
Note: in case you choose not to show the image, the sound will also be muted.
Mute - use this option to switch the sound off/on.
Aspect Ratio - use this option to select the aspect ratio of the displayed image. The possible options include:
1. 4 x 3 - use this option to set the image width to height ratio equal to 4:3. It is convenient to use for most of the
displays and TV screens that have the same aspect ratio.
2. 16 x 9 - use this option to set the image width to height ratio equal to 16:9. It is convenient to use for widescreen
displays, projectors and TV screens that have the same aspect ratio.
Show Panels - use this option to show or hide the main controls panel and all the other panels opened. You can select
the panel to be shown or hidden from the opened submenu list or you can select to open or hide all the panels.
Schedule... - use this option to set the schedule for the channels recording. It might be useful when you want to record
some programs but cannot do it at the time of the translation.
Settings... - use this option to go directly to the configuration window and change the device and channels settings. See
the Configuring section for more details on how to configure different device parameters.
Help - use this option to open and read the AVS4YOU Programs Help.
About - use this option to view the information about AVS TV Box.
Exit - use this option to close the window and the main controls panel and finish the work with AVS TV Box.
Favorites window express menu
Favorites window express menu is activated when you click the right mouse button within the limits of the Favorites window. There
are the following main items in this menu:
Rename - use this option to rename the currently selected channel.
Remove - use this option to delete the selected channel from the Favorites list.
Properties - use this option to open the window showing the selected channel properties.
Move Channel Up - use this option to move the selected channel up in the favorites window list.
Move Channel Down - use this option to move the selected channel down in the favorites window list.
Clear - use this option to remove all the channels from the Favorites list.
Show options - use this option to show or hide the Favorites window bottom options panel.
www.avs4you.com
Page 8 of 34
Show source - use this option to show the source device for the channel on the list. The name of the source device will be
shown to the right of the name of the channel. Tic this option to show the source device and untic it to hide it.
Show header - use this option to show or hide the heading of the Favorites window.
Hide unavailable - use this option to hide the channels from currently disconnected devices. If you deselect this option, the
unavailable channels will be shown in the Favorites list marked in other color.
Settings... - use this option to go directly to the configuration window and change the device and channels settings. See
the Configuring section for more details on how to configure different device parameters.
Snapshots window express menu
Snapshots window express menu is activated when you click the right mouse button within the limits of the Snapshots window.
There are the following main items in this menu that correspond to the buttons in this window:
Rename - use this option to change the name of the snapshot taken.
Save As... - use this option to save the currently selected snapshot into one of the supported formats.
Select All - use this option to select all the taken snapshots and save them further into one of the supported formats or
delete them.
Clear Selection - use this option to deselect all the selected items.
Delete - use this option to delete the currently selected snapshots from the list.
Delete All - use this option to delete all the snapshots from the list.
www.avs4you.com
Page 9 of 34
Getting Started
AVS TV Box has a simple and intuitive interface and lets the user start watching the video right after it is installed.
Nevertheless you will need to configure your device that is used as a capture device before you can start watching the channels or
capture video.
The configuration will include several easy steps:
1. Connect your capture device to your personal computer. You might need to turn down your PC to install the internal devices,
such as TV tuners and alike. If your device has a USB-interface, it is usually possible to connect it while your personal
computer is running. Please read the manual that comes with your device to avoid damage and installation problems.
2. Start your computer and install the capture device drivers. They are usually placed onto the CD/DVD that comes along with the
device, or you can download them from the device manufacturer's web site. For many of the devices connected via USB-cable
no additional driver software is needed as it is included into the windows installation package.
3. Launch the AVS TV Box software. Click the Settings button to select the channels that you will be able to watch using AVS
TV Box.
4. Select the Device Parameters tab of the Settings window. Select the device to be configured and set its parameters. See
the Device Parameters Settings section for more detail on how to configure different capture devices.
5. Select the Channels tab of the Settings window. Click the Add Channel button to add the cameras to the channels list or
Scan for TV or Digital TV tuners to search for the existing channels. After that you can tic the channels you would like to
watch or capture and click the Add to Favorites button. See the Channels Settings section on how to set different
channels and add them to the Favorites list.
6. To watch the channels now you need to click the OK button to accept all the changes and close the configuration window.
See the Watching Channels section on how to watch the channels of the selected capture devices.
7. If you plan to record your video, you will need to set the Recording parameters first and after that you will be able to
capture video or take snapshots. See also the respective sections on how to playback the recorded files and use the
Electronic Program Guide.
Configuring
The configuration window is activated by pressing the Settings button on the main controls panel or selecting the Settings...
option in the Express menu.
The configuration window consists of six tabs:
General - use this tab to set program general parameters that will be applied to all the devices installed on your computer.
Device params - use this tab to set the parameters of the devices installed on your computer. The availability of the settings
depends on the type of the device.
Channels - use this tab to set the channels that will be displayed in the Favorites window and the program main window.
Paths - use this tab to set the recordings and snapshots paths.
Record - use this tab to set the video and audio parameters of the files that you will capture your video with.
Colors - use this tab to set the parameters of the colors of the displayed video image.
www.avs4you.com
Page 10 of 34
General Settings
In the General settings tab of the configuration window you can set two parameters of the AVS TV Box program:
Show advertisement on start up - use this option to turn on or off the advertisement playback at the program startup.
Show tool tips - use this option to turn on or off the tool tips for the main buttons of the AVS TV Box program.
Check for updates every (day, month, etc) - use this option to set the program update interval. It will check for new
updates at our web site within the set period.
Click OK to accept all the changes and continue work with AVS TV Box or Cancel to discard all the changes.
www.avs4you.com
Page 11 of 34
Device Parameters Settings
Before you can start watching the channels you need to configure the capture device used. The Device Parameters settings depend
on the device and will look differently for a specific device:
Web camera - using the web camera you will need to set up the sound source for the video. You can select the Audio
device from the present devices drop-down list and the Audio input depending on the selected audio device:
www.avs4you.com
Page 12 of 34
DV Camera or VCR - have not got any specific settings in the Device Parameters tab:
www.avs4you.com
Page 13 of 34
TV tuner - lets the user select the Country of the broadcast, TV Source (Antenna or Cable), Video input, Video
standard depending on the country and broadcast standard, Audio device and Audio input that will serve as a sound
source:
www.avs4you.com
Page 14 of 34
MPEG-2 TV tuner - lets the user select the Country of the broadcast, TV Source (Antenna or Cable), Video input,
Video standard depending on the country and broadcast standard.
Note: you cannot select Audio device and Audio input for a MPEG-2 TV tuner as this parameter is
set by the device itself:
www.avs4you.com
Page 15 of 34
Digital Terrestrial or Digital Cable TV tuner (DVB-T/DVB-C) - lets the user select the Digital Terrestrial TV or
Digital Cable TV from the list of available Device types, Provider and Network, that determines the frequency, inversion
and bandwidth:
Switching between different providers and networks (if available), you can tune in the necessary channels. You can also ask your
service provider or visit the provider's web site for the proper settings.
www.avs4you.com
Page 16 of 34
Satellite tuner (DVB-S) - lets the user select the Digital Satellite TV from the list of available Device types, Satellite
and Transponder, that determines the frequency, polarization and symbol rate:
You can also set the LNB (low-noise block converter) parameters:
Power - this option lets the user supply power to LNB or not.
Type - this option lets the user select the LNB type used. There are three main types of LNB:
1. K -band (uses low band of 9750 MHz and high band of 10600 MHz)
u
2. C-Band (uses low band of 5150MHz)
3. Circular (uses low band of 10750MHz)
Pressing the Configure button you will be able to adjust the additional LNB parameters:
www.avs4you.com
Page 17 of 34
You should select one of the above values to receive the satellite signal. You can also need to set some additional parameters
that include:
DiSEqC - stands for Digital Satellite Equipment Control - is a special communication protocol that is used between a
satellite receiver and a device such as a multi-dish switch or a small dish antenna rotor. When you are using a DiSEqC
switch, you may choose the right passageway to the correct LNB (LNB A - LNB B - LNB C - LNB D) according to your
DiSEqC switch.
Tone data burst - is used to turn on/off the tone or data burst switching functions.
F22KHzTone - is used to turn on/off the 22 KHz tone switching function.
Note: In Europe, LNB type is usually K u-band. For example, if you want to watch Astra or Hotbird satellites'
programs, the default setting of K u-band will be your right choice.
If you have no idea about what your antenna equipment information is, you should check the LNB frequency on your LNB user's guide
or consult your antenna manufacturer for more information.
www.avs4you.com
Page 18 of 34
Channels Settings
Before you can start watching the channels you need to configure them. The channels setting depends on the capture device used
and will look differently for a specific device:
Web camera - you can add the web camera video image to the favorite list so that it could be displayed in the Favorite
window and you could easily switch to it. Click the Add to Favorites button to add the web camera channel to the favorite
list.
www.avs4you.com
Page 19 of 34
DV Camera or VCR - you can add the DV Camera or VCR video image to the favorite list so that it could be displayed in the
Favorite window and you could easily switch to it. Click the Add to Favorites button to add the DV Camera or VCR channel
to the favorite list.
www.avs4you.com
Page 20 of 34
Digital TV tuner - before you can add the Digital TV tuner channels to the favorite list, you need to configure the channels.
To do that click the Scan button to start scanning for the channels of the stations broadcasting on this satellite, cable or
terrestrial network.
After the tuner finds the channels you can select the necessary stations from the list of the present ones, set their additional
properties and add them to the favorites list. Press the Properties button to configure the channels:
www.avs4you.com
Page 21 of 34
In the opened window you can see the information on the channel and can select the Audio Stream in your preferred language if
there are several of them. To add the channels to the Favorites list tick them and click the Add to Favorites button. The channels
already in the Favorites list will be marked with a red dot on the list in the settings window.
Note: the channels protected from the free watching will be marked as Scrambled, the other channels will be
marked Free. To clear the list of the channels click the Clear button, after that you can perform a new scan
pressing the Scan button.
TV tuner - similarly to the Digital TV tuner setting, you will need to set the channels list first.
Click the Scan button to start scanning for the channels. You will be offered the opportunity to scan all the channels the tuner
supports, continue the channels scan, if you started some scan before but interrupted for some reason or scan only the selected
channels range, that can be set in the below boxes. You can also clear the channels list before you start scanning for new
channels or leave it as it was to append the newly found channels to the list:
www.avs4you.com
Page 22 of 34
Note: you can add the channels with good signal to the favorites list during the channels scan. To do that
simply mark the Automatically add the channels with good signal to the favorites list checkbox in the
Scan Parameters window.
After the tuner finds the channels you can select the necessary stations from the list of the present ones and add them to the
favorites list, ticking them and clicking the Add to Favorites button. The channels already in the Favorites list will be marked with
a red dot on the list in the settings window. To clear the list of the channels click the Clear list button, after that you can perform a
new scan pressing the Scan button.
To view the channels properties and change some of them you can click the Properties button. The following window will be
opened:
Note: you have a possibility of fine tuning the selected channel - use the Frequency field to tune in the
channel if the program could not find it due to, for instance, a weak signal.
www.avs4you.com
Page 23 of 34
Note: if you changed some properties of a certain channel you found while scanning, you should add it to the
Favorites list to save the changes.
Paths Settings
In the Paths settings tab of the configuration window you can set the paths for the main program recorded and captured files. Here
you can choose the paths for the
Recorded files - use this option to select the directory where the recorded files will be placed.
Note: you might need quite much free space on your hard disk drive to keep the recorded files of large
length.
Timeshift option recorded files - use this option to select the directory where the program saves files, recorded with the
Timeshift option.
Note: you might need quite much free space on your hard disk drive to keep the recorded files of large
length.
Snapshot files - use this option to select the directory where the taken snapshots will be placed.
www.avs4you.com
Page 24 of 34
www.avs4you.com
Page 25 of 34
Recording Settings
In the Record settings tab of the configuration window you can select the recording parameters of the video. You can set video and
audio parameters here, select them from the presets or change manually:
Video properties:
Format - the format used to compress the video;
Size - the number of pixels that form the video image horizontally and vertically;
Frame Rate - the number of video frames displayed every second;
Bit Rate - the number of bits transferred per second.
Audio properties:
Format - the format used to compress the audio component of the recorded video;
Frequency - sampling frequency specified in hertz;
Channels - number of channels in the audio track (mono - one channel, stereo - two channels, quadro - four channels, 4.1 five channels, 5.1 - six channels, 6.1 - seven channels, 7.1 - eight channels);
Bit Rate - the number of data points used to approximate the true wave form (kilobits per second).
Note: these settings can be changed for analog devices only. If you use the MPEG-2 hardware tuner, you can
only change the driver settings. In case a satellite tuner is used no recording parameters can be changed.
www.avs4you.com
Page 26 of 34
Colors Settings
In the Colors settings tab of the configuration window you can set the Brightness, Contrast, Hue and Saturation parameters of
the colors of the displayed video image. All the parameters are set in percentage where the 0 value means that the selected
parameter is represented in its least strength and the 100 value will set the parameter to its most strength.
You can press the Default button to return to the AVS TV Box default values of the color settings.
www.avs4you.com
Page 27 of 34
Watching Channels
The Favorites window was designed to facilitate your navigation through the channels. Using it you no longer need to select the
capture device every time to watch the channels from different devices. All you need is to add them to the favorites list in the
Channels tab of the Configuration window and after that you can watch them as if they were within the same device:
To open the Favorites window, you need to click the Favorites button on the Main Controls panel.
The following buttons are used to navigate and edit the Favorites window:
Move channel up
Use this button to move the channel up in the Favorites list.
Move channel
down
Use this button to move the channel down in the Favorites
list.
Rename channel
Use this button to change the channel name that is displayed in
the Favorites list.
Delete channel
from list
Use this button to remove the channel from the Favorites list.
Clear list
Use this button to remove all the channels and clear the
Favorites list.
Note: that if some of the channels are unavailable at the moment due to the fact that the device they belong
to is disconnected, they will be shown in the Favorites list marked in a color different from all the other
channels:
www.avs4you.com
Page 28 of 34
If you wish to keep these unavailable channels in the list but prefer not to show it, you can select the Hide unavailable option in the
Favorites window express menu.
You can also use the Favorite channels surfing button to display all the channels on the favorites list that belong to the same
device. You will see the channels in the main display window. To view the channel you like just click it. To expand the selected
channel to the whole window you will need to double-click it.
To watch the channels and the recorded files simultaneously the Dual-view mode button in the main controls panel is used. If you
have some files recorded, you can view them together with the channels in the favorite list. Click the Playback button in the main
controls panel and press the Dual-view mode button. The screen of the AVS TV Box program will be divided into two parts - one
representing the recorded file and the second showing the currently selected channel:
To switch between the recorded video and the current channel just double-click the smaller window area (current channel in the
above figure) and they will change their positions in the AVS TV Box screen.
Capturing and Recording
You can start recording the video just clicking the Record button on the main controls panel. After that the recording will start and
you will be able to stop it pressing the Stop button or pause with the appropriate button.
But usually it is more convenient to use the scheduler option to record the video.
www.avs4you.com
Page 29 of 34
Using the scheduler to record the files
You can open the scheduling window using the express menu.
There are six buttons in this window:
Add...
- Use this button to add a new scheduling task. See below for details on how to add a new task
Modify...
- Use this button to modify the currently selected task
Delete
- Use this button to delete the currently selected task
Delete All
- Use this button to delete all the scheduled tasks from the list
OK
- Use this button to accept all the changes you have made and close this window
Cancel
- Use this button to discard all the changes you have made and close this window
The heading of the window consists of the following items:
Name
- The name of the scheduled task. By default will be Task 1, Task 2 and so on
Status
- The current status of the scheduled task
Channel
- The channel used as the scheduled task source
Action
- The action to be taken within the scheduled task
Length
- The duration of the scheduled task in minutes
Start
- The start time - date and time - of the scheduled task
www.avs4you.com
Page 30 of 34
All these parameters can be set when you press either Add... or Modify... button. The following window will open:
You can also select a weekday instead of the date to set the task. To avoid the repetition of the same task for several times you can
tic the Check unique parameters and select this task now check-box.
Note: if you want the program to perform some recording tasks, you should leave the program running and do
not record any other channels manually, otherwise the tasks you set will be skipped.
Click the OK button to accept all the changes or Cancel to discard all the changes and close the Add Schedule Task window.
Taking snapshots
When you press the Snapshot button on the main controls panel the Snapshots window will open with the images of the taken
snapshots. You can use the following options to manage your snapshots:
Select All
- Use this button to select all the taken snapshots and either save them in the
supported image formats or delete
Save As...
- Use this button to save the selected snapshots into one of the supported
formats. See below on the main formats supported and their settings
Delete
- Use this button to remove the selected snapshots from the list
www.avs4you.com
Page 31 of 34
When you press the Save As... button the following window will let you modify the image file and format properties:
Path
- The path to the file on your computer hard disk drive
File name
- The name that will be assigned to the image file to distinguish it from the other image files on your computer.
If you selected several snapshots at once, all of them will be saved with the same name that you select and to
distinguish them their consecutive number will be added to the file name, starting with 1 (e.g. my_file_1, my_
file_2 and so on)
Format
- The format used to save the image file. You can select among different image file formats depending on your
needs
Additional
format
settings
- You can set some additional image format parameters, varying depending on the format
Press the Save button to save the file with the selected parameters onto your computer hard disk drive or Cancel to abort the file
saving process.
www.avs4you.com
Page 32 of 34
Recorded Files Playback
If you select several files it might be convenient to view the list of all of them at once and select the necessary one that you would
like to playback. To open the recorded files window you need to press the Show recorded files button on the main controls panel.
After that you can do the following:
Play
- Use this button to playback the recorded video files
Stop
- Use this button to stop the recorded files playback
Rename
- Use this button to change the names of the currently selected recorded files
Delete
- Use this button to remove the currently selected files from the list
Delete All
- Use this button to remove all the files from the list and clear it
The heading of the window consists of the following items:
Name
- The name of the recorded file as it is saved onto the computer hard disk drive
Length
- The length of the video in this file
Creation
- The time of the file creation
File Path
- The path to the file on your computer hard disk drive
To watch the channels and the recorded files simultaneously the Dual-view mode button in the main controls panel is used. If you
have some files recorded, you can view them together with the channels in the favorite list. Click the Playback button in the main
controls panel and press the Dual-view mode button. The screen of the AVS TV Box program will be divided into two parts - one
representing the recorded file and the second showing the currently selected channel:
www.avs4you.com
Page 33 of 34
To switch between the recorded video and the current channel just double-click the smaller window area (current channel in the
above figure) and they will change their positions in the AVS TV Box screen.
Using Electronic Program Guide
Electronic Program Guide (EPG) or is a on-screen guide to scheduled broadcast television programs, allowing a viewer to navigate,
select, and discover content by time, title, channel, genre, etc.
The technology is based upon broadcasting data within the signal. EPGs are typically sent within the broadcast transport stream or
alongside it in a special data channel. The technology is predominant in the digital television and radio world. These signals may arrive
via cable TV, satellite TV, cable radio, satellite radio, or via over-the-air terrestrial broadcast stations.
By navigating through an EPG on a receiving device, users can see more information about the current program and about future
programs. Combined with AVS TV Box, EPG enables a viewer to plan his or her viewing and record broadcast programs to a hard
disk for later viewing.
You can activate the EPG function using the Electronic program guide button on the main controls panel. After that the EPG
window will open:
www.avs4you.com
Page 34 of 34
Here you can see the following information on the program:
Time
The exact date and time of the program
Duration
The duration of the program (hours: minutes: seconds)
Language
The language this program is available in
Caption
The title of the program
In the lower part of the EPG window you can see the detailed description of each program.
To finish the work with the EPG you can click the Close button.
www.avs4you.com

AVS4YOU Programs Help

Transcription

Similar documents

Untitled - Brookstone

Flatbed

Welcome to the Buffalo Wild Wings Online Store

Hotmail/Live/ MSN/Outlook.com

Mega Plexxus Instruction

- Saurashtra University

How To Use 311 Self Service Online

Welcome to the Buffalo Wild Wings Online Store

Attache Case Combination Bar Lock Operating

APPLYING FOR A LBKM Bursary