PRODUCTO DIEMAKERS SUPPLIES LIMITED

Transcription

®
PRODUCTO DIEMAKERS SUPPLIES LIMITED
SERVING THE CANADIAN MANUFACTURING INDUSTRY SINCE 1964
SPRINGS
• SPECIAL/CUSTOM SPRINGS
• DIE SPRINGS
• D-LINE SPRINGS
• COMPRESSION SPRINGS
• EXTENSION SPRINGS
• EASY SPRING SELECTOR
• GAS SPRINGS
• SPRING ASSORTMENTS
• REPLACEMENT SPRINGS
• DISC SPRINGS
ACCESSORIES
• ALLENAIR
• ENERPAC
• RING PRECISION
• TRANSFER SCREWS
• TRANSFER PUNCHES
• VLIER SPRING LOADED PLUNGERS
• VIBRA-SYSTEMS VIBRATION MOUNTS
• URETHANE PRODUCTS
• DAC
• WEICON TECHNICAL SPRAYS
ONTARIO •
TEL: (905) 856-9990 FAX: (905) 856-9887 641 Chrislea Road, Unit #4, Vaughan, ON L4L 8A3
QUEBEC
TEL: (450) 430-5082 FAX: (450) 430-1022 TOLL FREE: 1-866-508-5082
4486 Boulevard de la Grande Allee, Boisbriand, QC J7H 1R9
•
TOLL FREE: 1-866-562-0555
www.productodiemakers.com
sales@productodiemakers.com
ABOUT
®
SPRINGSINDEX
SPECIAL/CUSTOM SPRINGS............................................................................................................................................. 3
DIE SPRINGS INCH SERIES..........................................................................................................................................4 - 7
ISO D-LINE SPRINGS......................................................................................................................................................8 - 11
COMPRESSION SPRINGS SERIES 020......................................................................................................................... 12
EXTENSION SPRINGS SERIES 020............................................................................................................................... 13
EASY SPRING SELECTOR GUIDE (Compression & Extension)...................................................................14 - 18
SPRING BOXED ASSORTMENTS.................................................................................................................................... 19
REPLACEMENT SPRINGS #750, #400, #250...................................................................................................20 - 21
GAS SPRINGS........................................................................................................................................................................ 22
DISC SPRINGS.............................................................................................................................................................. 23 - 25
ACCESSORIES
ALLENAIR...................................................................................................................................................................... 26 - 27
ENERPAC................................................................................................................................................................................ 28
RING PRECISION.................................................................................................................................................................. 28
TRANSFER SCREWS.......................................................................................................................................................... 29
TRANSFER PUNCHES........................................................................................................................................................ 29
VLIER SPRING LOADED PLUNGERS...................................................................................................................30 - 31
VIBRA-SYSTEMS VIBRATION MOUNTS...................................................................................................................... 32
URETHANE............................................................................................................................................................................. 33
DAC........................................................................................................................................................................................... 34
WEICON.................................................................................................................................................................................. 34
ABOUT US
We Have You Covered For All Your Die Supplies in Canada… Serving the Manufacturing Industry Since 1964
QUALITY PRODUCTS • SUPERIOR CUSTOMER SERVICE • QUICK SHIPPING
Representing companies throughout the world permits PRODUCTO Diemakers to offer you a quality product for a
competitive price. We stock most items listed in our catalogue, with same day shipping on most stock items.
Our product lines include Springs, Hydraulics, Pneumatics, Transfer Punches, Transfer Screws, Lubricants and Adhesives,
Spring Loaded Devices, Urethane Products, Fluid Power, Precision Components and Industrial Supplies.
PRODUCTO Die Springs are manufactured under rigid quality control, inspection and testing to ensure long service life.
Our Die Springs are color coded by work range, to simplify selection specification and in plant identification. Die
spring inventories assure fast, off-the-shelf delivery.
CUSTOM/SPECIAL Die Springs are our specialty. Just fill out the information on the next page and we will get
back to you with a quote.
Can’t find what you’re looking for, just give us a call. We couldn’t fit everything we carry in the catalogue.
Additional information can be found on our website: www.productodiemakers.com or give our customer service
department a call.
We look forward to serving you with all your Diemakers Supplies
2
WWW.PRODUCTODIEMAKERS.COM • SERVING THE CANADIAN MANUFACTURING INDUSTRY SINCE 1964
CUSTOM SPRINGS
QUOTATION REQUEST
®
PRODUCTO CAN ASSIST YOU IN MAKING ANY SIZE OR TYPE OF SPRING
WE ARE THE SPRING SPECIALISTS!
Date:__________________________________________________
EXTENSION SPRINGS
Company Name:_______________________________________
WIRE DIAMETER
Contact: ______________________________________________
(O.D.)
OUTSIDE
DIAMETER
Position:_______________________________________________
BODY LENGTH
Phone:________________________________________________
LENGTH INSIDE LOOPS
OVERALL LENGTH
Fax:___________________________________________________
TYPES OF ENDS USED
ON EXTENSION SPRINGS
E-mail:________________________________________________
A
FULL LOOP
FROM SIDE
D
MACHINE
HOOK
Quantity:____________ Date Required:___________________
Dimensions/Type:Inch
FULL LOOP
B FROM CENTER
DOUBLE FULL
C
LOOP
Compression
Metric
Extension Torsion Other
Description: ___________________________________________
DOUBLE TWISTED FULL
LOOP OVER CENTER
E
F
SINGLE FULL LOOP
CENTERED
G
LONG ROUND END
HOOK OVER CENTER
______________________________________________________
Inside Diameter:___________ Outside Diameter: ____________
COMPRESSION SPRINGS
Fits in Hole Size:__________Fits over a Rod Size: _________
______ Lbs. Load at ______ Inches. Free Length:___________
DISTANCE BETWEEN COILS
PITCH
1
2
3
4
5
6
(I.D.)
INSIDE
DIAMETER
7 8
(O.D.)
OUTSIDE
DIAMETER
FREE LENGTH
Total # of Coils:___________ Solid Height:_________________
Wire Size:________________ Type of Ends:_________________
WIRE
DIAMETER
STANDARD TYPES OF ENDS USED ON COMPRESSION SPRINGS
Pitch:___________________ R/L Wind:____________________
If Extension – Length of Spring Inside of Hooks:____________
Z
SQUARED
END
X
SQUARED END
GROUND
Y
PLAIN
END
W
PLAIN END
GROUND
If Extension – Body Length:______________________________
Finish:_________________________________________________
TORSION SPRINGS
Type of Material if Known:_______________________________
Working Environment:___________________________________
.)
.D DE
(O TSI TER
U E
O AM
DI
IMPORTANT
Please photocopy this page.
Supply us with complete specifications,
a drawing and a sample.
WIRE DIAMETER
LENGTH OF LEG
NUMBER
OF COILS
USE THIS INCH SCALE TO ASSIST WITH APPROXIMATE MEASUREMENTS
0
1
2
3
4
5
6
7
3
PRODUCTO (MP) MEDIUM PRESSURE
DIE SPRINGS - COLOUR CODED BLUE
®
Load Deflection Table
LOAD DEFLECTION
*Maximum Deflection
(50% of free length)
HOLE (O.D.)
x
ROD (I.D.)
3/8 x 3/16 x
Wire Size
.039 x .070
For Long Life
Maximum Operation Def.
For Optimum Life
1/2 x 9/32 x
Wire Size
.052 x .093
ROD
5/8 x 11/32 x
Wire Size
.069 x .109
FREE
LENGTH
HOLE
3/4 x 3/8 x
Wire Size
.075 x .165
1 x 1/2 x
Wire Size
.100 x .215
4
Length
Producto
Part#
Box
Qty
Max. Oper
Def 40% of
free length
Load at
1/10”
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
1 x 1/2 x
1
MP02
200
24.0
6.0
1 1/4
MP02A
200
27.0
5.4
1 1/2
MP03
100
24.0
4.0
1 3/4
MP03A
100
23.8
3.4
Wire Size
.100 x .215
Length
Producto
Part#
Box
Qty
Max. Oper
Def 40% of
free length
Load at
1/10”
(lb.)
3
MP46
25
198.0
16.5
3 1/2
MP47
25
210.0
15.0
4
MP48
25
192.0
12.0
4 1/2
MP49
25
187.2
10.4
2
MP04
100
22.4
2.8
5
MP410
25
192.0
9.6
2 1/2
MP05
100
24.0
2.4
5 1/2
MP411
25
193.6
8.8
3
MP06
100
25.2
2.1
6
MP412
25
192.0
8.0
12
MP024
50
28.8
0.6
7
MP414
25
201.6
7.2
1
MP12
100
44.0
11.0
8
MP416
25
192.0
6.0
12
MP424
25
192.0
4.0
1 1/4
MP12A
100
41.0
8.2
1 1/2
MP13
100
40.8
6.8
1 3/4
MP13A
100
42.0
6.0
2
MP14
100
44.0
5.5
2 1/2
MP15
50
45.0
4.5
1 1/4 x 5/8 x
Wire Size
.115 x .285
1 1/2
MP53
50
297.6
49.6
1 3/4
MP53A
50
296.8
42.4
2
MP54
50
281.6
35.2
2 1/2
MP55
25
288.0
28.8
3
MP16
50
42.0
3.5
3
MP56
25
288.0
24.0
3 1/2
MP17
50
42.0
3.0
3 1/2
MP57
25
280.0
20.0
4 1/2
MP19
50
45.0
2.5
4
MP58
25
281.6
17.6
5 1/2
MP111
50
46.2
2.1
4 1/2
MP59
25
288.0
16.0
6 1/2
MP113
50
36.4
1.4
5
MP510
25
272.0
13.6
7 1/2
MP115
50
36.0
1.2
5 1/2
MP511
25
281.6
12.8
12
MP124
50
33.6
0.7
6
MP512
25
288.0
12.0
7
MP514
25
291.2
10.4
1
MP22
100
65.6
16.4
1 1/4
MP22A
100
64.0
12.8
8
MP516
25
281.6
8.8
1 1/2
MP23
50
64.8
10.8
10
MP520
25
288.0
7.2
12
MP524
25
288.0
6.0
2
MP64
25
424.0
53.0
2 1/2
MP65
25
450.0
45.0
1 3/4
MP23A
50
67.2
9.6
2
MP24
50
70.4
8.8
2 1/2
MP25
50
60.0
6.0
3
MP26
50
67.2
5.6
3 1/2
MP27
50
67.2
4.8
1 1/2 x 3/4 x
Wire Size
.135 x .345
3
MP66
25
432.0
36.0
3 1/2
MP67
25
420.0
30.0
4
MP28
50
70.4
4.4
4
MP68
25
432.0
27.0
12
MP224
50
76.8
1.6
4 1/2
MP69
25
414.0
23.0
1
MP32
50
124.8
31.2
5
MP610
25
420.0
21.0
1 1/4
MP32A
50
128.0
25.6
5 1/2
MP611
25
407.0
18.5
1 1/2
MP33
50
120.0
20.0
6
MP612
25
408.0
17.0
1 3/4
MP33A
50
123.2
17.6
7
MP614
25
406.0
14.5
2
MP34
50
115.2
14.4
8
MP616
25
409.6
12.8
2 1/2
MP35
50
120.0
12.0
10
MP620
25
400.0
10.0
12
MP624
25
384.0
8.0
2 1/2
MP85
25
1000.0
100.0
3
MP86
25
996.0
83.0
3
MP36
50
115.2
9.6
3 1/2
MP37
50
112.0
8.0
4
MP38
50
115.2
7.2
4 1/2
MP39
50
115.2
6.4
5
MP310
50
120.0
6.0
2x1x
Wire Size
.195 x .468
3 1/2
MP87
25
907.2
64.8
4
MP88
25
960.0
60.0
5 1/2
MP311
50
121.0
5.5
4 1/2
MP89
25
954.0
53.0
6
MP312
50
120.0
5.0
5
MP810
25
940.0
47.0
6 1/2
MP313
50
117.0
4.5
5 1/2
MP811
25
862.4
39.2
6
MP812
20
936.0
39.0
7 1/2
MP315
50
114.0
3.8
12
MP324
50
115.2
2.4
7
MP814
20
873.6
31.2
1
MP42
50
220.0
55.0
8
MP816
10
912.0
28.5
1 1/4
MP42A
50
225.0
45.0
10
MP820
10
832.0
20.8
1 1/2
MP43
50
210.0
35.0
12
MP824
10
840.0
17.5
1 3/4
MP43A
50
210.0
30.0
2
MP44
50
208.0
26.0
2 1/2
MP45
50
200.0
20.0
PRODUCTO (MHP) MEDIUM HIGH PRESSURE
DIE SPRINGS - COLOUR CODED RED
®
HOLE (O.D.)
x
ROD (I.D.)
Length
Producto
Part#
Box
Qty
Max. Oper
Def 30% of
free length
3/8 x 3/16 x
1
MHP02
200
1 1/4
MHP02A
1 1/2
1 3/4
Wire Size
.046 x .073
1/2 x 9/32 x
Wire Size
.061 x .093
5/8 x 11/32 x
Wire Size
.081 x .123
3/4 x 3/8 x
Wire Size
.093 x .156
1 x 1/2 x
Wire Size
.115 x .218
Load at
1/10”
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
Producto
Part#
Box
Qty
Max. Oper
Def 30% of
free length
27.0
9.0
1 x 1/2 x
4 1/2
MHP49
25
229.5
17.0
200
27.4
7.3
5
MHP410
25
216.0
14.4
MHP03
100
30.2
6.7
5 1/2
MHP411
25
211.2
12.8
MHP03A
100
30.5
5.8
6
MHP412
25
216.0
12.0
2
MHP04
100
30.0
5.0
7
MHP414
25
210.0
10.0
2 1/2
MHP05
100
31.5
4.2
8
MHP416
25
211.2
8.8
3
MHP06
100
27.0
3.0
12
MHP424
25
223.2
6.2
12
MHP024
50
32.4
0.9
1 1/2
MHP53
50
514.8
114.4
1
MHP12
100
50.4
16.8
1 3/4
MHP53A
50
529.2
100.8
1 1/4
MHP12A
100
48.8
13.0
2
MHP54
50
518.4
86.4
1 1/2
MHP13
100
42.8
9.5
2 1/2
MHP55
25
468.0
62.4
1 3/4
MHP13A
100
44.6
8.5
3
MHP56
25
460.8
51.2
2
MHP14
100
45.0
7.5
3 1/2
MHP57
25
462.0
44.0
2 1/2
MHP15
50
45.0
6.0
4
MHP58
25
441.6
36.8
3
MHP16
50
51.3
5.7
4 1/2
MHP59
25
432.0
32.0
3 1/2
MHP17
50
42.0
4.0
5
MHP510
25
435.0
29.0
12
MHP124
50
43.2
1.2
5 1/2
MHP511
25
435.6
26.4
1
MHP22
100
90.0
30.0
6
MHP512
25
450.0
25.0
1 1/4
MHP22A
100
80.6
21.5
7
MHP514
25
420.0
20.0
1 1/2
MHP23
50
85.5
19.0
8
MHP516
25
441.6
18.4
1 3/4
MHP23A
50
88.2
16.8
10
MHP520
25
435.0
14.5
2
MHP24
50
88.8
14.8
12
MHP524
25
446.4
12.4
2 1/2
MHP25
50
86.3
11.5
2
MHP64
25
648.0
108.0
3
MHP26
50
90.0
10.0
2 1/2
MHP65
25
642.0
85.6
3 1/2
MHP27
50
89.3
8.5
3
MHP66
25
561.6
62.4
4
MHP28
50
91.2
7.6
3 1/2
MHP67
25
554.4
52.8
12
MHP224
50
97.2
2.7
4
MHP68
25
576.0
48.0
1
MHP32
50
150.0
50.0
4 1/2
MHP69
25
583.2
43.2
1 1/4
MHP32A
50
142.5
38.0
5
MHP610
25
552.0
36.8
1 1/2
MHP33
50
144.0
32.0
5 1/2
MHP611
25
567.6
34.4
1 3/4
MHP33A
50
151.2
28.8
6
MHP612
25
547.2
30.4
2
MHP34
50
148.8
24.8
7
MHP614
25
554.4
26.4
2 1/2
MHP35
50
144.0
19.2
8
MHP616
25
528.0
22.0
3
MHP36
50
129.6
14.4
10
MHP620
25
528.0
17.6
3 1/2
MHP37
50
134.4
12.8
12
MHP624
20
518.4
14.4
4
MHP38
50
144.0
12.0
2 1/2
MHP85
25
888.0
118.4
4 1/2
MHP39
50
151.2
11.2
3
MHP86
25
864.0
96.0
5
MHP310
50
135.0
9.0
3 1/2
MHP87
25
840.0
80.0
5 1/2
MHP311
50
132.0
8.0
4
MHP88
25
796.8
66.4
6
MHP312
50
135.0
7.5
4 1/2
MHP89
25
810.0
60.0
12
MHP324
50
129.6
3.6
5
MHP810
25
840.0
56.0
1
MHP42
50
228.0
76.0
5 1/2
MHP811
25
831.6
50.4
1 1/4
MHP42A
50
234.0
62.4
6
MHP812
20
849.6
47.2
1 1/2
MHP43
50
223.2
49.6
7
MHP814
20
840.0
40.0
1 3/4
MHP43A
50
231.0
44.0
8
MHP816
10
844.8
35.2
2
MHP44
50
240.0
40.0
10
MHP820
10
780.8
26.0
2 1/2
MHP45
50
232.5
31.0
12
MHP824
10
806.4
22.4
3
MHP46
25
225.0
25.0
3 1/2
MHP47
25
226.8
21.6
4
MHP48
25
220.8
18.4
Wire Size
.115 x .218
1 1/4 x 5/8 x
Wire Size
.156 x .281
1 1/2 x 3/4 x
Wire Size
.187 x .312
2x1x
Wire Size
.225 x .437
Load at
1/10”
(lb.)
LOAD DEFLECTION
*Maximum Deflection
For Long Life
For Optimum Life
ROD
FREE
LENGTH
HOLE
5
PRODUCTO (HP) HIGH PRESSURE
DIE SPRINGS - COLOUR CODED GOLD
®
LOAD DEFLECTION
*Maximum Deflection
HOLE (O.D.)
x
ROD (I.D.)
3/8 x 3/16 x
Wire Size
.054 x .072
For Long Life
For Optimum Life
ROD
1/2 x 9/32 x
Wire Size
.070 x .093
5/8 x 11/32 x
Wire Size
.093 x .125
FREE
LENGTH
3/4 x 3/8 x
Wire Size
.125 x .165
HOLE
1 x 1/2 x
Wire Size
.158 x .225
6
Length
Producto
Part#
Box
Qty
Max. Oper
Def 25% of
free length
Load at
1/10”
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
Producto
Part#
Box
Qty
Max. Oper
Def 25% of
free length
1 x 1/2 x
6
HP412
25
384.0
7
HP414
25
392.0
22.4
8
HP416
25
384.0
19.2
1
HP02
200
27.5
11.0
1 1/4
HP02A
200
30.6
9.8
1 1/2
HP03
100
30.0
8.0
1 3/4
HP03A
100
36.8
8.4
2
HP04
100
36.0
7.2
2 1/2
HP05
100
34.4
5.5
3
HP06
100
31.5
4.2
12
HP024
50
36.0
1
HP12
100
1 1/4
HP12A
100
1 1/2
HP13
1 3/4
2
Wire Size
.158 x .225
Load at
1/10”
(lb.)
25.6
12
HP424
25
360.0
12.0
1 1/2
HP53
50
795.0
212.0
1 3/4
HP53A
50
794.5
181.6
2
HP54
50
748.0
149.6
1.2
2 1/2
HP55
25
735.0
117.6
59.0
23.6
3
HP56
25
714.0
95.2
58.1
18.6
3 1/2
HP57
25
658.0
75.2
100
58.1
15.5
4
HP58
25
664.0
66.4
HP13A
100
60.4
13.8
4 1/2
HP59
25
657.0
58.4
HP14
100
55.0
11.0
5
HP510
25
662.5
53.0
2 1/2
HP15
50
52.5
8.4
5 1/2
HP511
25
649.0
47.2
3
HP16
50
55.5
7.4
6
HP512
25
636.0
42.4
3 1/2
HP17
50
52.5
6.0
7
HP514
25
644.0
36.8
12
HP124
50
48.0
1.6
8
HP516
25
656.0
32.8
1
HP22
100
106.0
42.4
10
HP520
25
640.0
25.6
1 1/4
HP22A
100
92.5
29.6
1 1/2
HP23
50
102.0
27.2
1 3/4
HP23A
50
105.0
24.0
2
HP24
50
104.0
20.8
2 1/2
HP25
50
106.3
17.0
3
HP26
50
108.0
14.4
3 1/2
HP27
50
106.8
4
HP28
50
12
HP224
50
1 1/4 x 5/8 x
Wire Size
.200 x .295
12
HP524
20
624.0
20.8
2
HP64
25
952.0
190.4
2 1/2
HP65
25
968.8
155.0
3
HP66
25
975.0
130.0
3 1/2
HP67
25
931.0
106.4
4
HP68
25
912.0
91.2
12.2
4 1/2
HP69
25
882.0
78.4
108.0
10.8
5
HP610
25
890.0
71.2
90.0
3.0
5 1/2
HP611
25
880.0
64.0
1 1/2 x 3/4 x
Wire Size
.225 X .350
1
HP32
50
270.0
108.0
6
HP612
25
876.0
58.4
1 1/4
HP32A
50
275.0
88.0
7
HP614
25
868.0
49.6
1 1/2
HP33
50
246.0
65.6
8
HP616
25
864.0
43.2
1 3/4
HP33A
50
262.5
60.0
10
HP620
20
860.0
34.4
2
HP34
50
248.0
49.6
12
HP624
15
864.0
28.8
2 1/2
HP35
50
250.0
40.0
3
HP36
50
255.0
34.0
2 1/2
HP85
25
1625.0
260.0
3
HP86
25
1500.0
3 1/2
HP37
50
245.0
28.0
200.0
3 1/2
HP87
25
1487.5
4
HP38
50
250.0
170.0
25.0
4
HP88
25
1500.0
150.0
2x1x
Wire Size
.270 x .470
4 1/2
HP39
50
247.5
22.0
4 1/2
HP89
25
1350.0
120.0
5
HP310
50
243.8
19.5
5
HP810
20
1375.0
110.0
5 1/2
HP311
50
233.8
17.0
5 1/2
HP811
20
1375.0
100.0
6
HP312
50
240.0
16.0
6
HP812
15
1410.0
94.0
12
HP324
50
240.0
8.0
7
HP814
15
1435.0
82.0
1
HP42
50
520.0
208.0
8
HP816
10
1460.0
73.0
1 1/4
HP42A
50
535.0
171.2
10
HP820
10
1375.0
55.0
1 1/2
HP43
50
444.0
118.4
12
HP824
10
1260.0
42.0
1 3/4
HP43A
50
455.0
104.0
2
HP44
50
450.0
90.0
2 1/2
HP45
50
425.0
68.0
3
HP46
25
408.0
54.4
3 1/2
HP47
25
399.0
45.6
4
HP48
25
400.0
40.0
4 1/2
HP49
25
396.0
35.2
5
HP410
25
390.0
31.2
5 1/2
HP411
25
396.0
28.8
PRODUCTO (XHP) EXTRA HIGH PRESSURE
DIE SPRINGS - COLOUR CODED GREEN
®
HOLE (O.D.)
x
ROD (I.D.)
Length
Producto
Part#
Box
Qty
Max. Oper
Def 20% of
free length
3/8 x 3/16 x
1
XHP02
200
1 1/4
XHP02A
1 1/2
1 3/4
Wire Size
.059 x .080
1/2 x 9/32 x
Wire Size
.084 x .097
5/8 x 11/32 x
Wire Size
.110 x .126
3/4 x 3/8 x
Wire Size
.135 x .165
1 x 1/2 x
Wire Size
.188 x .225
Load at
1/10”
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
Producto
Part#
Box
Qty
Max. Oper
Def 20% of
free length
44.0
22.0
1 1/4 x 5/8 x
2
XHP54
50
768.0
192.0
200
40.0
16.0
2 1/2
XHP55
25
720.0
144.0
XHP03
100
37.5
12.5
3
XHP56
25
710.4
118.4
XHP03A
100
40.3
11.2
3 1/2
XHP57
25
705.6
100.8
2
XHP04
100
36.0
9.0
4
XHP58
25
672.0
84.0
2 1/2
XHP05
100
35.0
7.0
4 1/2
XHP59
25
705.6
78.4
3
XHP06
100
39.0
6.5
5
XHP510
25
680.0
68.0
12
XHP024
50
36.0
1.5
6
XHP512
25
672.0
56.0
1
XHP12
100
64.0
32.0
8
XHP516
25
665.6
41.6
1 1/4
XHP12A
100
60.0
24.0
10
XHP520
25
672.0
33.6
1 1/2
XHP13
100
60.0
20.0
12
XHP524
20
633.6
26.4
1 3/4
XHP13A
100
59.5
17.0
2
XHP64
25
1504.0
376.0
2
XHP14
100
56.0
14.0
2 1/2
XHP65
25
1472.0
294.4
2 1/2
XHP15
50
57.5
11.5
3
XHP66
25
1387.2
231.2
3
XHP16
50
54.0
9.0
3 1/2
XHP67
25
1372.0
196.0
3 1/2
XHP17
50
56.0
8.0
4
XHP68
25
1369.6
171.2
12
XHP124
50
60.0
2.5
4 1/2
XHP69
25
1332.0
148.0
1
XHP22
100
126.0
63.0
5
XHP610
25
1360.0
136.0
1 1/4
XHP22A
100
117.5
47.0
6
XHP612
25
1324.8
110.4
XHP616
20
1292.8
80.8
Wire Size
.225 x .295
1 1/2 x 3/4 x
Wire Size
.300 x .350
Load at
1/10”
(lb.)
1 1/2
XHP23
50
114.0
38.0
8
1 3/4
XHP23A
50
112.0
32.0
10
XHP620
15
1344.0
67.2
2
XHP24
50
116.0
29.0
12
XHP624
10
1305.6
54.4
2 1/2
XHP25
50
110.0
22.0
2 1/2
XHP85
25
1908.0
381.6
3
XHP26
50
114.0
19.0
3
XHP86
25
1872.0
312.0
3 1/2
XHP27
50
112.0
16.0
3 1/2
XHP87
25
1780.8
254.4
4
XHP28
50
108.0
13.5
4
XHP88
20
1760.0
220.0
12
XHP224
50
108.0
4.5
4 1/2
XHP89
20
1699.2
188.8
1
XHP32
50
280.0
140.0
5
XHP810
15
1728.0
172.8
1 1/4
XHP32A
50
275.0
110.0
6
XHP812
15
1699.2
141.6
1 1/2
XHP33
50
267.0
89.0
8
XHP816
10
1600.0
100.0
1 3/4
XHP33A
50
262.5
75.0
10
XHP820
10
1680.0
84.0
2
XHP34
50
272.0
68.0
12
XHP824
10
1708.8
71.2
2 1/2
XHP35
50
250.0
50.0
3
XHP36
50
243.0
40.5
3 1/2
XHP37
50
241.5
34.5
4
XHP38
50
240.0
30.0
4 1/2
XHP39
50
238.5
26.5
5
XHP310
50
235.0
23.5
5 1/2
XHP311
50
236.5
21.5
6
XHP312
50
234.0
19.5
12
XHP324
50
228.0
9.5
1 1/2
XHP43
50
480.0
160.0
2
XHP44
50
464.0
116.0
2 1/2
XHP45
50
448.0
89.6
3
XHP46
25
441.6
73.6
3 1/2
XHP47
25
436.8
62.4
4
XHP48
25
441.6
55.2
4 1/2
XHP49
25
439.2
48.8
5
XHP410
25
432.0
43.2
6
XHP412
25
432.0
36.0
12
XHP424
25
422.4
17.6
2x1x
Wire Size
.365 x .460
LOAD DEFLECTION
*Maximum Deflection
For Long Life
For Optimum Life
ROD
FREE
LENGTH
HOLE
7
SPRINGS
ISO D-LINE GREEN LIGHT DUTY
®
Length
PRODUCTO
Part#
Bag
Qty
Load
@ 40%
of free
length
Spring
Rate per
1/10 inch
Def.
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Load
@ 40%
of free
length
Spring
Rate per
1/10 inch
Def.
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Load
@ 40%
of free
length
Spring
Rate per
1/10 inch
Def.
3/8 x 3/16 x
1
303104D
50
27.0
7.0
1/2 x 9/32 x
1 3/4
303207D
50
44.0
6.4
1 1/4 x 5/8 x
2 1/2
303610D
10
317
31.4
1 1/4
303105D
50
29.0
5.7
2
303208D
50
43.0
5.3
3
303612D
10
312
26.1
1 1/2
303106D
50
28.0
4.7
2 1/2
303210D
50
41.0
4.1
3 1/2
303614D
10
309
22.0
1 3/4
303107D
50
25.0
3.7
3
303212D
10
40.0
3.4
4
303616D
10
309
19.3
2
303108D
50
29.0
3.6
3 1/2
303214D
10
38.0
2.7
4 1/2
303618D
10
307
17.1
2 1/2
303110D
50
30.0
3.0
4
303216D
10
38.0
2.3
5
303620D
10
295
14.7
3
303112D
50
29.0
2.4
12
303248D
10
37.0
0.8
5 1/2
303622D
10
299
13.6
12
303148D
10
29.0
0.6
1
303304D
50
71.0
18.1
6
303624D
10
297
12.4
1
303204D
50
42.0
10.6
1 1/4
303305D
50
67.0
13.3
7
303628D
10
282
10.1
1 1/4
303205D
50
43.0
8.5
1 1/2
303306D
50
70.0
11.7
8
303632D
5
285
8.9
1 1/2
303206D
50
44.0
7.3
1 3/4
303307D
50
71.0
10.2
10
303640D
5
288
7.2
2
303308D
50
71.0
8.9
12
303648D
5
263
5.5
2 1/2
303310D
50
73.0
7.2
2
303708D
10
480
59.7
3
303312D
10
68.0
5.7
2 1/2
303710D
10
458
45.4
3 1/2
303314D
10
72.0
5.1
3
303712D
10
455
38.0
4
303316D
10
70.0
4.3
3 1/2
303714D
10
458
32.7
4 1/2
303318D
10
68.0
3.8
4
303716D
10
446
27.7
12
303348D
10
70.0
1.5
4 1/2
303718D
10
443
24.7
1
303404D
50
125.0
31.6
5
303720D
10
448
22.4
1 1/4
303405D
50
125.0
24.8
5 1/2
303722D
10
440
20.0
1 1/2
303406D
50
117.0
19.6
6
303724D
10
434
18.1
1 3/4
303407D
50
110.0
15.8
7
303728D
10
437
15.6
2
303408D
50
114.0
14.2
8
303732D
5
428
13.4
2 1/2
303410D
50
108.0
10.7
10
303740D
5
431
10.8
3
303412D
10
110.0
9.2
12
303748D
5
424
8.8
3 1/2
303414D
10
105.0
7.5
2 1/2
303810D
10
855
84.8
4
303416D
10
109.0
6.8
3
303812D
10
855
71.5
4 1/2
303418D
10
112.0
6.3
3 1/2
303814D
10
836
59.7
5
303420D
10
107.0
5.4
4
303816D
10
829
51.6
5 1/2
303422D
10
108.0
4.9
4 1/2
303818D
10
806
44.9
6
303424D
10
103.0
4.3
5
303820D
10
804
40.2
12
303448D
10
105.0
2.2
5 1/2
303822D
5
794
36.0
1
303504D
50
232
58.9
6
303824D
5
778
32.5
1 1/4
303505D
50
232
46.1
7
303828D
5
778
27.8
1 1/2
303506D
50
221
36.9
8
303832D
5
763
23.9
1 3/4
303507D
50
213
30.7
10
303840D
5
814
20.4
2
303508D
50
210
26.2
12
303848D
5
734
15.3
2 1/2
303510D
50
205
20.4
3
303912D
5
1307
109.2
3
303512D
10
195
16.3
3 1/2
303914D
5
1260
89.9
3 1/2
303514D
10
198
14.1
4
303916D
5
1248
77.7
4
303516D
10
189
11.8
4 1/2
303918D
5
1211
67.4
4 1/2
303518D
10
190
10.6
5
303920D
5
1207
60.3
5
303520D
10
190
9.5
6
303924D
5
1180
49.3
5 1/2
303522D
10
183
8.3
7
303928D
5
1179
42.1
6
303524D
10
186
7.8
8
303932D
5
1154
36.1
7
303528D
10
189
6.7
10
303940D
5
1139
28.5
8
303532D
10
193
6.0
12
303948D
5
1124
23.4
12
303548D
10
185
3.9
1 1/2
303606D
10
314
52.4
1 3/4
303607D
10
329
47.5
2
303608D
10
324
40.3
1/2 x 9/32 x
5/8 x 11/32 x
LOAD DEFLECTION
For Long Life
Maximum Operation Def
For Optimum Life
3/4 x 3/8 x
ROD
FREE
LENGTH
1 x 1/2 x
HOLE
1 1/4 x 5/8 x
8
HOLE (O.D.)
x
ROD (I.D.)
1 1/2 x 3/4 x
2x1x
2 1/2 x 1 1/2 x
SPRINGS
ISO D-LINE BLUE MEDIUM DUTY
®
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 40%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 40%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 40%
of free
length
Load
at 1/10
in Def.
(lb.)
3/8 x 3/16 x
1
304104D
50
35.0
8.9
1 x 1/2 x
3
304512D
10
335.0
28.0
2 1/2 x 1 1/2 x
3
304912D
5
2074.0
173.3
1 1/4
304105D
50
39.0
7.7
3 1/2
304514D
10
327.0
23.3
3 1/2
304914D
5
1980.0
141.3
1 1/2
304106D
50
40.0
6.7
4
304516D
10
328.0
20.4
4
304916D
5
1933.0
120.4
1 3/4
304107D
50
38.0
5.5
4 1/2
304518D
10
327.0
18.1
4 1/2
304918D
5
1899.0
104.8
2
304108D
50
40.0
4.9
5
304520D
10
325.0
16.3
5
304920D
5
1857.0
92.8
2 1/2
304110D
50
38.0
3.8
5 1/2
304522D
10
329.0
15.0
6
304924D
5
1809.0
75.6
3
304112D
50
38.0
3.1
6
304524D
10
325.0
13.6
7
304928D
5
1778.0
63.4
12
304148D
10
37.0
0.8
7
304528D
10
322.0
11.5
8
304932D
5
1768.0
55.3
1
304204D
50
66.0
16.8
8
304532D
10
322.0
10.1
9
304936D
5
1769.0
49.0
1 1/4
304205D
50
65.0
12.8
12
304548D
10
317.0
6.6
10
304940D
5
1769.0
44.2
1 1/2
304206D
50
64.0
10.7
1 1/2
304606D
10
570.0
95.3
12
304948D
5
1759.0
36.6
1 3/4
304207D
50
63.0
9.1
1 3/4
304607D
10
540.0
77.9
2
304208D
50
63.0
7.8
2
304608D
10
533.0
66.4
2 1/2
304210D
50
60.0
6.0
2 1/2
304610D
10
504.0
50.0
3
304212D
10
59.0
5.0
3
304612D
10
485.0
40.5
3 1/2
304214D
10
60.0
4.3
3 1/2
304614D
10
483.0
34.5
4
304216D
10
58.0
3.6
4
304616D
10
473.0
29.4
12
304248D
10
59.0
1.2
4 1/2
304618D
10
473.0
26.1
1
304304D
50
125.0
31.8
5
304620D
10
476.0
23.8
1 1/4
304305D
50
115.0
22.8
5 1/2
304622D
10
473.0
21.6
1 1/2
304306D
50
118.0
19.8
6
304624D
10
461.0
19.3
1 3/4
304307D
50
121.0
17.5
7
304628D
10
463.0
16.5
2
304308D
50
122.0
15.2
8
304632D
5
454.0
14.2
2 1/2
304310D
50
120.0
11.9
10
304640D
5
456.0
11.4
3
304312D
10
122.0
10.2
12
304648D
5
458.0
9.5
3 1/2
304314D
10
120.0
8.6
2
304708D
10
781.0
97.3
4
304316D
10
122.0
7.6
2 1/2
304710D
10
741.0
73.5
4 1/2
304318D
10
121.0
6.7
3
304712D
10
733.0
61.2
12
304348D
10
115.0
2.4
3 1/2
304714D
10
713.0
50.9
1
304404D
50
205.0
52.0
4
304716D
10
693.0
43.1
1 1/4
304405D
50
195.0
38.8
4 1/2
304718D
10
691.0
38.2
1 1/2
304406D
50
188.0
31.5
5
304720D
10
696.0
34.8
1 3/4
304407D
50
185.0
26.6
5 1/2
304722D
10
692.0
31.6
2
304408D
50
183.0
22.8
6
304724D
10
694.0
29.0
2 1/2
304410D
50
177.0
17.6
7
304728D
10
688.0
24.6
3
304412D
10
176.0
14.7
8
304732D
5
682.0
21.3
3 1/2
304414D
10
177.0
12.6
10
304740D
5
687.0
17.2
4
304416D
10
178.0
11.1
12
304748D
5
679.0
14.1
4 1/2
304418D
10
176.0
9.7
2 1/2
304810D
10
1219.0
121.0
5
304420D
10
175.0
8.7
3
304812D
10
1136.0
94.9
5 1/2
304422D
10
176.0
8.1
3 1/2
304814D
10
1116.0
79.6
6
304424D
10
175.0
7.3
4
304816D
10
1113.0
69.3
12
304448D
10
176.0
3.7
4 1/2
304818D
10
1106.0
61.1
1
304504D
50
385.0
97.9
5
304820D
10
1082.0
54.1
1 1/4
304505D
50
364.0
72.2
5 1/2
304822D
5
1080.0
49.4
1 1/2
304506D
50
356.0
59.5
6
304-824-D
5
1070.0
44.7
1 3/4
304507D
50
352.0
50.9
7
304828D
5
1054.0
37.6
2
304508D
50
342.0
42.6
8
304832D
5
1043.0
32.6
2 1/2
304510D
50
329.0
32.7
9
304836D
5
1047.0
29.0
10
304840D
5
1050.0
26.2
12
304848D
5
1040.0
21.6
1/2 x 9/32 x
5/8 x 11/32 x
3/4 x 3/8 x
1 x 1/2 x
1 1/4 x 5/8 x
1 1/2 x 3/4 x
2 1/2 x 1 x
LOAD DEFLECTION
For Long Life
For Optimum Life
ROD
FREE
LENGTH
HOLE
9
SPRINGS
ISO D-LINE RED HEAVY DUTY
®
HOLE (O.D.)
x
ROD (I.D.)
3/8 x 3/16 x
1/2 x 9/32 x
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 30%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
1/2 x 9/32 x
Max.
Oper
Def 30%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 30%
of free
length
Load
at 1/10
in Def.
(lb.)
1 1/4 x 5/8 x
1
305104D
50
39.0
13.3
2
305208D
50
69.0
11.4
3
305612D
10
880.0
98.0
305105D
50
39.0
10.2
2 1/2
305210D
50
66.0
8.7
3 1/2
305614D
10
849.0
80.8
1 1/2
305106D
50
43.0
9.5
3
305212D
10
69.0
7.7
4
305616D
10
850.0
70.6
1 3/4
305107D
50
43.0
8.3
3 1/2
305214D
10
66.0
6.3
4 1/2
305618D
10
851.0
62.7
2
305108D
50
41.0
6.8
4 1/2
305216D
10
65.0
4.8
5
305620D
10
846.0
56.4
2 1/2
305110D
50
43.0
5.6
12
305248D
10
65.0
1.8
5 1/2
305622D
10
836.0
50.9
3
305112D
50
40.0
4.5
1
305304D
50
131.0
44.5
6
305624D
10
838.0
46.7
12
305148D
10
40.0
1.1
1 1/4
305305D
50
132.0
34.8
7
305628D
5
831.0
39.5
1
305204D
50
71.0
24.2
1 1/2
305306D
50
130.0
29.0
8
305632D
5
831.0
34.6
1 1/4
305205D
50
69.0
18.2
1 3/4
305307D
50
135.0
26.0
10
305640D
5
829.0
27.6
1 1/2
305206D
50
69.0
15.4
2
305308D
50
127.0
21.1
12
305648D
5
827.0
22.9
1 3/4
305207D
50
71.0
13.6
2 1/2
305310D
50
127.0
16.8
2
305708D
10
1278.0
212.2
3
305312D
50
132.0
14.7
2 1/2
305710D
10
1295.0
171.3
For Long Life
5/8 x 11/32 x
3/4 x 3/8 x
For Optimum Life
1 x 1/2 x
ROD
FREE
LENGTH
10
Bag
Qty
1 1/4
LOAD DEFLECTION
HOLE
PRODUCTO
Part#
1 1/4 x 5/8 x
1 1/2 x
3/4 x
3 1/2
305314D
10
131.0
12.5
3
305712D
10
1197.0
133.4
4
305316D
10
130.0
10.8
3 1/2
305714D
10
1183.0
112.5
4 1/2
305318D
10
121.0
9.0
4
305716D
10
1172.0
97.3
12
305348D
10
127.0
3.5
4 1/2
305718D
10
1208.0
88.9
1
305404D
50
370.0
125.1
5
305720D
10
1177.0
78.5
1 1/4
305405D
50
370.0
97.8
5 1/2
305722D
10
1157.0
70.5
1 1/2
305406D
50
350.0
78.0
6
305724D
10
1172.0
65.3
1 3/4
305407D
50
345.0
66.4
7
305728D
10
1162.0
55.2
2
305408D
50
332.0
55.2
8
305732D
5
1160.0
48.4
2 1/2
305410D
50
320.0
42.4
10
305740D
5
1158.0
38.6
3
305412D
10
322.0
35.9
12
305748D
5
1156.0
32.1
3 1/2
305414D
10
323.0
30.7
2 1/2
305810D
10
1831.0
242.3
4
305416D
10
320.0
26.6
3
305812D
10
1718.0
191.3
4 1/2
305418D
10
325.0
23.9
3 1/2
305814D
10
1662.0
158.1
5
305420D
10
320.0
21.3
4
305816D
10
1685.0
139.8
5 1/2
305422D
10
318.0
19.3
4 1/2
305818D
10
1665.0
122.5
6
305424D
10
317.0
17.6
5
305820D
10
1620.0
108.0
12
305448D
10
313.0
8.7
5 1/2
305822D
5
1585.0
96.5
1
305504D
50
626
212.1
6
305824D
5
1579.0
88.8
2x1x
1 1/4
305505D
50
606
160.3
7
305828D
5
1571.0
74.7
1 1/2
305506D
50
562.0
125.3
8
305832D
5
1575.0
65.7
1 3/4
305507D
50
597.0
114.9
10
305840D
5
1551.0
51.7
2
305508D
50
561.0
93.1
12
305848D
5
1553.0
43.1
2 1/2
305510D
50
548.0
72.6
3
305912D
5
--
352.9
3
305512D
50
550.0
61.3
3 1/2
305914D
5
--
294.1
3 1/2
305514D
10
541.0
51.4
4
305916D
5
--
250.1
4
305516D
10
539.0
44.7
4 1/2
305918D
5
--
211.3
4 1/2
305518D
10
548.0
40.3
5
305920D
5
--
190.1
5
305520D
10
541.0
36.1
6
305924D
5
--
153.6
5 1/2
305522D
10
539.0
32.8
7
305928D
5
--
129.0
6
305524D
10
544.0
30.3
8
305932D
5
--
113.1
7
305528D
10
543.0
25.8
9
305936D
5
--
82.0
8
305532D
10
540.0
22.5
10
305940D
5
--
88.5
12
305548D
10
550.0
15.3
12
305948D
5
--
73.1
1 1/2
305606D
10
992.0
221.1
178.7
1 3/4
305607D
10
929.0
2
305608D
10
920.0
152.7
2 1/2
305610D
10
882.0
116.7
2 1/2 x 1 1/2 x
SPRINGS
ISO D-LINE YELLOW EXTRA HEAVY DUTY
®
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 25%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 25%
of free
length
Load
at 1/10
in Def.
(lb.)
HOLE (O.D.)
x
ROD (I.D.)
Length
PRODUCTO
Part#
Bag
Qty
Max.
Oper
Def 25%
of free
length
Load
at 1/10
in Def.
(lb.)
3/8 x 3/16 x
1
306104D
50
51.0
20.8
1 x 1/2 x
2 1/2
306510D
50
558.0
88.6
2 1/2 x 1 1/2 x
3
306912D
5
--
544.0
1 1/4
306105D
50
49.0
15.7
3
306512D
10
552.0
73.9
3 1/2
306914D
5
--
468.0
1 1/2
306106D
50
50.0
13.3
3 1/2
306514D
10
543.0
62.0
4
306916D
5
--
400.0
1 3/4
306107D
50
49.0
11.2
4
306516D
10
546.0
54.4
4 1/2
306918D
5
--
354.0
2
306108D
50
48.0
9.6
4 1/2
306518D
10
549.0
48.5
5
306920D
5
--
323.0
2 1/2
306110D
50
48.0
7.6
5
306520D
10
545.0
43.6
6
306924D
5
--
262.0
3
306112D
50
48.0
6.4
5 1/2
306522D
10
541.0
39.6
7
306928D
5
--
219.0
12
306148D
10
47.0
1.6
6
306524D
10
542.0
36.2
8
306932D
5
--
192.0
1
306204D
50
77.0
31.2
7
306528D
10
546.0
31.1
10
306940D
5
--
150.0
1 1/4
306205D
50
76.0
24.2
8
306532D
10
544.0
27.2
12
306948D
5
--
124.0
1 1/2
306206D
50
74.0
19.7
12
306548D
10
540.0
18.0
1 3/4
306207D
50
69.0
15.9
1 1/2
306606D
10
1022.0
273.1
2
306208D
50
72.0
14.4
1 3/4
306607D
10
1039.0
239.8
2 1/2
306210D
50
72.0
11.4
2
306608D
10
1007.0
200.7
3
306212D
10
71.0
9.5
2 1/2
306610D
10
983.0
156.1
3 1/2
306214D
10
70.0
8.0
3
306612D
10
968.0
129.4
LOAD DEFLECTION
4
306216D
10
73.0
7.3
3 1/2
306614D
10
968.0
110.5
12
306248D
10
66.0
2.2
4
306616D
10
931.0
92.8
For Long Life
1
306304D
50
191.0
77.8
4 1/2
306618D
10
935.0
82.6
1 1/4
306305D
50
178.0
56.6
5
306620D
10
946.0
75.6
1 1/2
306306D
50
177.0
47.3
5 1/2
306622D
10
928.0
67.8
1 3/4
306307D
50
175.0
40.4
6
306624D
10
931.0
62.2
2
306308D
50
174.0
34.6
7
306628D
10
919.0
52.4
2 1/2
306310D
50
173.0
27.4
8
306632D
5
918.0
45.9
3
306312D
10
170.0
22.8
10
306640D
5
917.0
36.7
3 1/2
306314D
10
171.0
19.5
12
306648D
5
915.0
30.5
4
306316D
10
169.0
16.8
2
306708D
10
1687.0
336.1
4 1/2
306318D
10
170.0
15.1
2 1/2
306710D
10
1629.0
258.6
12
306348D
10
168.0
5.6
3
306712D
10
1597.0
213.4
1
306404D
50
445.0
186.4
3 1/2
306714D
10
1570.0
179.3
1 1/4
306405D
50
427.0
139.8
4
306716D
10
1570.0
156.3
1 1/2
306406D
50
412.0
113.7
4 1/2
306718D
10
1569.0
138.6
1 3/4
306407D
50
398.0
97.2
5
306720D
10
1556.0
124.5
2
306408D
50
397.0
83.9
5 1/2
306722D
10
1533.0
112.0
2 1/2
306410D
50
389.0
65.5
6
306724D
10
1536.0
102.6
3
306412D
10
379.0
53.7
7
306732D
10
1520.0
86.7
3 1/2
306414D
10
370.0
44.8
8
306740D
5
1514.0
75.7
4
306416D
10
369.0
38.9
10
306742D
5
1507.0
60.3
4 1/2
306418D
10
368.0
34.4
12
306748D
5
1506.0
50.2
5
306420D
10
364.0
30.9
2 1/2
306810D
10
2415.0
383.4
5 1/2
306422D
10
357.0
27.7
3
306812D
10
2294.0
306.7
6
306424D
10
358.0
25.4
3 1/2
306814D
10
2257.0
257.6
12
306448D
10
355.0
12.6
4
306816D
10
2230.0
222.1
1
306504D
50
655.0
262.1
4 1/2
306818D
10
2209.0
195.2
1 1/4
306505D
50
626.0
198.8
5
306820D
10
2176.0
174.1
1 1/2
306506D
50
592.0
158.3
5 1/2
306822D
5
2149.0
157.1
1 3/4
306507D
50
584.0
134.9
6
306824D
5
2141.0
143.1
2
306508D
50
564.0
112.4
7
306832D
5
2090.0
119.3
8
306840D
5
2110.0
105.6
10
306842D
5
2091.0
83.6
12
306848D
5
2057.0
68.5
1/2 x 9/32 x
5/8 x 11/32 x
3/4 x 3/8 x
1 x 1/2 x
1 1/4 x 5/8 x
1 1/2 x 3/4 x
2 1/2 x 1 x
For Optimum Life
ROD
FREE
LENGTH
HOLE
11
COMPRESSION SPRINGS
NUMERICAL LISTING BY OUTSIDE DIAMETER
®
COMPRESSION SPRINGS
12
Part #
Outside
Diameter
(in)
Free
Length
(in)
Wire
Diameter
(in)
Rate
(lbs. / in)
Solid
Height
Unit
Pack
Part #
Outside
Diameter
(in)
Free
Length
(in)
Wire
Diameter
(in)
Rate
(lbs. / in)
Solid
Height
Unit
Pack
020-074
0.078
0.53
0.012
5.67
0.264
12
020-051
0.516
12.00
0.063
2.80
5.438
12
020-073
0.078
0.56
0.011
3.90
0.231
12
020-059
0.531
1.03
0.105
436.00
0.950
12
020-076
0.109
0.81
0.018
12.00
0.342
12
020-109
0.562
4.38
0.102
42.15
2.344
12
020-075
0.109
0.91
0.018
9.30
0.414
12
020-069
0.590
2.19
0.040
3.55
0.380
12
020-125
0.120
0.62
0.016
6.61
0.252
25
020-123
0.600
1.50
0.070
40.00
0.560
12
020-126
0.120
0.75
0.016
5.32
0.304
25
020-068
0.625
2.84
0.080
30.00
1.080
12
020-077
0.172
0.22
0.012
1.15
0.120
12
020-050
0.625
11.50
0.054
1.22
3.564
6
020-056
0.176
10.00
0.014
0.15
2.254
12
020-121
0.688
1.06
0.149
1230.00
0.814
12
020-127
0.180
0.75
0.022
8.70
0.281
25
020-067
0.688
4.06
0.105
53.70
1.952
12
020-128
0.180
1.12
0.022
6.80
0.352
25
020-115
0.719
0.88
0.125
550.00
0.625
12
020-129
0.180
1.12
0.022
7.00
0.330
25
020-049
0.734
12.00
0.080
3.80
4.880
3
020-130
0.180
1.25
0.022
6.50
0.424
25
020-114
0.750
1.75
0.125
220.00
1.063
12
020-084
0.188
0.94
0.012
0.32
0.240
12
020-072
0.750
2.63
0.106
72.00
1.166
12
020-131
0.240
1.00
0.026
7.80
0.306
25
020-070
0.844
1.10
0.080 Brass
21.50
0.360
12
020-132
0.240
1.25
0.026
5.50
0.403
25
020-066
0.859
2.59
0.135
154.00
1.485
12
020-133
0.240
1.50
0.026
4.60
0.445
25
020-065
0.875
2.00
0.120
110.00
0.964
12
020-055
0.250
10.00
0.022
0.26
2.486
12
020-064
0.875
3.06
0.092
21.50
1.098
12
020-080
0.281
1.25
0.040
18.00
0.640
12
020-048
0.875
10.00
0.080
3.20
3.000
3
020-079
0.281
1.31
0.040
21.05
0.540
12
020-047
0.875
12.00
0.105
8.00
5.170
3
020-098
0.281
2.06
0.020
0.29
0.510
12
020-124
0.906
0.75
0.141 x 0.187
1632.00
0.494
12
020-085
0.312
0.88
0.025 Ph. Brz
2.60
0.200
12
020-119
0.938
1.00
0.207
2800.00
0.880
6
020-081
0.312
1.97
0.022
0.65
0.528
12
020-063
0.938
2.03
0.080
16.00
0.640
12
020-082
0.312
2.44
0.032
1.30
0.768
12
020-122
0.995
2.50
0.145
130.00
1.400
12
020-083
0.312
2.44
0.028
1.00
0.672
12
020-062
1.015
2.56
0.120
56.00
1.148
12
020-054
0.312
10.00
0.022
0.19
2.266
12
020-118
1.175
1.06
0.225
2400.00
0.845
12
020-053
0.359
12.00
0.048
2.20
5.273
12
020-120
1.312
1.25
0.125
92.12
0.687
12
020-134
0.360
1.50
0.035
6.87
0.416
25
020-117+
1.468
1.25
0.281
3960.00
1.124
12
020-135
0.360
1.75
0.035
6.30
0.446
25
020-078*
0.281 x 1.560
0.50
0.013
0.68
0.117
12
020-136
0.360
2.00
0.035
5.40
0.560
25
020-087*
0.531 x 0.281
0.91
0.072
56.00
0.522
12
020-086
0.375
0.78
0.042 Brass
7.40
0.378
12
020-061**
3.50
0.051
1.83
0.714
12
020-088
0.375
2.03
0.048
11.00
0.998
12
020-094
0.375
2.21
0.063
42.00
1.147
12
0.531 x
1.031 x
0.859
020-052
0.375
11.50
0.047
2.71
4.240
12
020-058*
0.625 x 0.750
1.00
0.080 Brass
33.45
0.440
12
020-093
0.438
2.00
0.054
15.40
0.972
12
020-057*
0.656 x 0.938
0.94
0.058 Ph. Brz
5.08
0.363
12
020-071
0.438
2.56
0.041
2.60
1.117
12
020-089
0.438
2.63
0.048
7.20
0.950
12
020-090
0.469
2.50
0.053
12.00
0.918
12
020-060
0.500
0.97
0.072 Ph. Brz
52.00
0.612
12
020-092
0.500
2.06
0.048
5.60
0.808
12
020-091
0.500
2.50
0.063
18.00
1.000
12
* Conical Spring
** Barrel Spring
+ Square Wire
EXTENSION SPRINGS
NUMERICAL LISTING BY FREE LENGTH
®
EXTENSION SPRINGS
Part #
Free
Length
(in)
Outside
Diameter
(in)
Wire
Diameter
(in)
Rate
(lbs./in)
Approx. Load @
Ref. Ext. (in)
Unit
Pack
Part #
Free
Length
(in)
Outside
Diameter
(in)
Wire
Diameter
(in)
Rate
(lbs./in)
Approx. Load @
Ref. Ext. (in)
Unit
Pack
020-137
0.620
0.120
0.016
3.30
1.6 lbs @ 1.07”
25
020-029
6.000
0.875
0.120
18.50
26.5 lbs @ 7.0”
6
020-138
0.750
0.120
0.016
2.50
1.6 lbs @ 1.34”
25
020-016
6.125
0.266
0.035
1.10
4.0 lbs @ 8.125”
12
020-139
0.880
0.120
0.016
2.00
1.6 lbs @ 1.62”
25
020-111
6.250
0.750
0.080
3.30
8.0 lbs @ 8.25”
12
020-042
1.000
0.188
0.014
0.19
.14 lbs @ 1.5”
12
020-009
6.438
0.438
0.048
1.10
4.2 lbs @ 8.437”
12
020-140
1.000
0.180
0.022
2.80
2.6 lbs @ 1.86”
25
020-010
6.500
0.328
0.035
0.58
2.2 lbs @ 8.5”
12
020-141
1.120
0.180
0.022
2.40
2.6 lbs @ 2.13”
25
020-011
6.625
0.156
0.026
1.81
2.2 lbs @ 8.625”
12
020-040
1.125
0.234
0.020
0.75
.53 lbs @ 1.625”
12
020-116
6.750
0.906
0.092
3.00
6.0 lbs @ 7.75”
12
020-039
1.130
0.300
0.040 Brass
5.25
2.0 lbs @ 1.200”
12
020-104
7.625
1.250
0.207
93.80
170.0 lbs @ 8.625”
2
020-142
1.250
0.180
0.022
2.00
2.6 lbs @ 2.43”
25
020-030
8.000
1.062
0.135
13.48
38.0 lbs @ 10.0”
6
020-143
1.370
0.240
0.026
1.80
3.3 lbs @ 2.96”
25
020-007
8.125
0.344
0.048
1.60
6.3 lbs @ 10.125”
12
020-037
1.438
0.344
0.048
15.00
10.0 lbs @ 1.812”
12
020-105
8.188
1.812
0.250
65.00
98.0 lbs @ 9.188”
2
020-144
1.500
0.240
0.026
1.60
3.3 lbs @ 2.96
25
020-031
8.500
1.000
0.105
3.96
16.8 lbs @ 10.25”
3
020-146
1.500
0.360
0.037
3.40
5.9 lbs @ 3.06”
25
020-008
9.062
0.172
0.029
1.00
3.5 lbs @ 10.125”
12
020-034
1.625
0.500
0.080
74.93
23.0 lbs @ 1.875”
12
020-005
10.000
0.359
0.054
2.30
6.2 lbs @ 13.0”
12
020-145
1.750
0.240
0.026
1.30
3.3 lbs @ 1.75”
25
020-006
10.000
0.375
0.047
1.32
5.5 lbs @ 13.0”
12
020-147
1.750
0.360
0.037
2.89
5.9 lbs @ 3.77
25
020-004
10.000
0.500
0.062
2.09
10.2 lbs @ 12.0”
12
020-148
2.000
0.360
0.037
2.20
5.9 lbs @ 4.44”
25
020-003
10.000
0.625
0.072
2.10
8.8 lbs @ 13.0”
6
020-095
2.000
0.718
0.107
90.86
51.0 lbs @ 2.5”
12
020-002
10.000
0.812
0.072
0.75
5.6 lbs @ 12.0”
3
020-035
2.062
0.156
0.020 Brass
0.50
8.5 lbs @ 2.812”
12
020-001
10.000
0.875
0.092
2.50
11.5 lbs @ 13.0”
3
020-032
2.594
0.750
0.105
46.00
29.5 lbs @ 2.968
12
020-100
10.000
1.125
0.148
14.00
48.0 lbs @ 13.0”
6
020-033
2.656
0.750
0.080
10.30
12.5 lbs @ 3.656”
12
020-101
12.000
1.250
0.162
12.60
66.0 lbs @ 15.0”
6
020-097
3.000
0.719
0.105
41.03
33.0 lbs @ 3.25”
12
020-102
14.000
1.375
0.177
13.00
74.0 lbs @ 18.0”
6
020-019
3.250
0.375
0.041
1.90
5.2 lbs @ 5.25”
12
020-158
15.125
0.984
0.080
0.47
2.99 lbs @ 15.94”
12
020-099
3.875
0.688
0.105
32.83
40.0 lbs @ 5.0”
6
020-152
16.000
0.297
0.041
0.70
4.3 lbs @ 17.86”
12
020-020
4.000
0.250
0.028
0.81
1.9 lbs @ 6.0”
12
020-153
16.000
0.344
0.048
0.98
4.3 lbs @ 17.59”
12
020-113
4.000
0.625
0.113
70.00
93.0 lbs @ 5.0”
12
020-154
16.000
0.375
0.054
1.34
5.9 lbs @ 17.94”
12
020-024
4.000
0.719
0.105
30.78
36.5 lbs @ 5.0”
12
020-155
16.000
0.422
0.063
2.20
9.0 lbs @ 17.73”
12
020-023
4.062
0.734
0.063
1.73
4.3 lbs @ 6.062”
12
020-156
16.000
0.438
0.072
4.06
11.7 lbs @ 17.88”
12
020-022
4.500
0.484
0.063
4.86
14.0 lbs @ 6.5”
12
020-108
16.000
1.125
0.105
3.00
5.5 lbs @ 18.0”
12
020-026
5.000
0.312
0.041
1.81
3.1 lbs @ 6.5”
12
020-103
16.000
1.562
0.207
16.50
100.0 lbs @ 21.0”
6
020-028
5.250
0.438
0.063
6.50
16.0 lbs @ 7.25”
12
020-025
5.250
0.531
0.062
5.00
8.5 lbs @ 6.25”
12
020-018
5.344
0.250
0.041
4.30
8.0 lbs @ 5.843”
12
020-027
5.375
0.344
0.048
2.60
6.2 lbs @ 7.375”
12
020-014
5.500
0.375
0.054
4.00
10.0 lbs @ 7.5”
12
020-013
5.500
0.562
0.080
10.50
24.5 lbs @ 7.0”
12
020-012
5.625
0.547
0.080
10.00
24.0 lbs @ 7.625”
12
020-017
5.750
0.250
0.028
0.59
1.6 lbs @ 7.75”
12
020-015
5.750
0.297
0.048
4.40
9.3 lbs @ 7.75”
12
020-112
6.000
0.734
0.062
0.93
2.70 lbs @ 6.976”
12
13
EASY SPRING SELECTOR
COMPRESSION
®
WIRE
STOCK#
0.010
3-32-10
.0930 *
0.011
020-073
0.078
115
0.156
020-077
0.172
0.012
0.013
0.014
0.015
0.016
0.017
0.018
0.020
OD
FL
RATE
ENDS
SOLID
HT
WIRE
STOCK#
OD
FL
10.00
0.12
P
2.800
0.025
020-085
0.3125
0.87
2.60
SQ
0.56
3.90
S&G
0.231
430
0.3125
1.43
1.75
SQ
2.00
0.23
SQ
0.352
74X
0.3125
1.43
1.75
SQ
0.21
1.15
S&G
0.120
99X
0.3750
1.87
1.00
0.2500
2.00
2.59
020-074
0.078
0.53
5.67
S&G
0.264
94X
020-084
0.188
0.94
0.32
SQ
0.240
157
0.1875
2.25
RATE
ENDS
SOLID
HT
STOCK#
OD
FL
RATE
ENDS
SOLID
HT
0.200
1-4-35
.2500 *
10.00
1.82
P
4.550
0.412
3-8-35
.3750 *
10.00
0.61
P
3.500
0.412
7-16-35
.4375 *
10.00
0.54
P
2.450
SQ
0.400
1-2-35
.5000 *
10.00
0.25
P
3.150
SQ
0.550
163 **
0.2500
2.50
C-1
.2500 *
10.00
2.40
P
SQ
1-8-12
.1250 *
10.00
0.11
P
3.000
125
0.2812
2.31
2.09
SQ
0.475
0.037
5-16-37
.3125 *
10.00
1.35
P
4.070
020-078
.2810X
0.50
0.68
SQ
0.117
123
0.2500
2.62
1.82
SQ
0.750
0.040
020-080
0.2810
1.25
18.00
SQ
0.640
(CONICAL)
1.56
020-131
0.2400
1.00
7.80
SQ
0.306
020-079
0.2810
1.31
21.05
P
0.540
3-32-14
.0930 *
10.00
0.50
P
3.990
020-132
0.2400
1.25
5.50
SQ
0.403
020-069
0.5900
2.19
3.55
S&G
0.380
3-16-14
.1880 *
10.00
0.08
P
1.960
020-133
0.2400
1.50
4.60
SQ
0.445
7 OR 407
.4062 X
1.00
020-056
0.176
10.00
0.15
P
2.254
23
0.3125
1.87
2.00
SQ
0.442
TAPER
0.6875
20
0.2188
1.62
0.45
SQ
0.330
422
0.3125
1.87
2.00
SQ
0.442
122
0.3750
1.16
12.11
SQ
0.492
120
0.2188
1.62
0.45
SQ
0.330
3-16-26
.1875 *
10.00
1.39
P
3.380
17
0.3125
1.38
29.14
SQ
0.410
419
0.2188
1.62
0.45
SQ
0.330
1-4-26
.2500 *
10.00
0.69
P
2.470
416
0.3125
1.38
29.14
SQ
0.410
020-125
0.1200
0.62
6.61
SQ
2.520
C-129
.1250 *
11.00
P
84X
0.4375
1.44
5.45
SQ
0.615
C-128
.1875 *
11.00
P
79X
0.3750
1.94
10.90
SQ
0.533
0.027
112
0.2500
1.93
5.04
SQ
0.532
76X
0.3125
2.00
14.57
SQ
0.897
0.028
67X
0.3281
1.12
4.67
SQ
0.280
509
0.3125
2.00
4.67
SQ
0.280
24
0.3125
2.31
13.60
SQ
0.738
423
0.3125
2.31
13.60
SQ
0.738
0.026
020-126
0.1200
0.75
5.32
SQ
3.040
1-8-16
.1250 *
10.00
0.38
P
4.000
C-6
.2500 *
0.75
1.60
SQ
0.66
C-7
.2500 *
1.50
161
0.2500
2.00
020-076
0.1090
0.81
12.00
0.041
SQ
SQ
SQ
427
0.3281
1.12
SQ
165 **
0.2812
2.30
020-083
0.3120
1.44
1.00
SQ
0.672
020-071
0.4380
2.56
2.60
SQ
1.117
19
0.2031
2.25
8.37
SQ
1.248
65
0.6250
2.69
1.56
SQ
0.656
418
0.2031
2.25
8.37
SQ
1.248
515
0.5000
3.00
SQ
0.342
0.030
SQ
020-075
0.1090
0.90
9.30
P
0.414
3-16-18
.1880 *
10.00
0.26
P
2.520
1-4-18
.2500 *
10.00
0.14
P
1.710
116
0.2500
1.31
14.54
SQ
0.416
519
0.6250
4.00
126
0.1875
0.87
3.08
SQ
0.380
1-4-31
.2500 *
10.00
1.46
P
3.100
54
0.4688
5.25
2.17
SQ
1.107
421
0.1875
1.25
4.11
SQ
0.300
5-16-31
.3125 *
10.00
0.63
P
3.410
1-4-41
.2500 *
10.00
5.83
P
3.690
71X
0.1875
1.50
2.24
SQ
0.500
3-8-31
.3750 *
10.00
0.33
P
3.410
5-16-41
.3125 *
10.00
2.88
P
3.280
22
0.2188
1.25
15.61
SQ
0.576
1-2-41
.5000 *
18.00
0.61
P
3.320
98X
0.2500
1.44
14.54
SQ
0.416
18
0.3125
1.50
0.93
SQ
0.280
417
0.3125
1.50
0.93
SQ
0.280
0.031
0.032
501
0.1875
2.00
431
0.2500
1.44
14.54
SQ
0.416
0.2500
2.00
0.82
SQ
0.520
92X
0.3125
1.69
5.72
SQ
0.480
429
0.2500
2.00
0.82
SQ
0.520
87X
0.2344
1.75
12.19
SQ
0.676
503
0.2500
2.00
507
0.3125
2.00
020-098
0.2810
2.06
C-8
.3750 *
2.00
2.30
SQ
0.021
159 **
0.2500
2.50
020-082
0.3125
2.44
1.30
SQ
0.022
020-127
0.1800
0.75
8.70
SQ
0.281
C-9
.3750 *
3.00
1.20
SQ
020-128
0.1800
1.00
6.80
SQ
0.352
C-127
.2188 *
11.00
P
21
0.1875
1.00
2.44
SQ
0.418
C-126
.2500 *
11.00
P
020-129
0.1800
1.12
7.00
SQ
0.330
C-125
.3125 *
11.00
P
C-124
.3750 *
11.00
P
377
0.3750
12.00
0.37
P
3.232
77X
0.3750
1.44
3.70
SQ
0.560
90X
0.3125
1.50
7.24
SQ
0.595
020-134
0.3600
1.50
6.87
SQ
0.416
2.266
020-135
0.3600
1.75
6.30
SQ
0.446
020-136
0.3600
2.00
5.40
SQ
0.560
14
0.036
SQ
69X
0.023
WIRE
SQ
SQ
0.29
SQ
0.510
SQ
020-130
0.1800
1.25
6.50
SQ
0.424
72X
0.2500
1.88
1.81
SQ
0.508
020-081
0.3125
1.97
0.65
SQ
0.528
020-055
0.2500
10.00
0.26
P
2.486
1-4-22
.2500 *
10.00
020-054
0.3125
10.00
P
0.19
P
0.035
SQ
SQ
SQ
5-16-22
.3125 *
10.00
0.15
P
2.200
420
0.1875
1.31
2.44
SQ
0.418
505
0.2500
2.00
SQ
25
0.2500
2.00
2.02
SQ
0.460
511
0.3750
3.00
SQ
424
0.2500
2.00
2.02
SQ
0.460
3-16-35
.1875 *
10.00
3.84
P
0.768
6.650
COMPRESSION
®
WIRE
STOCK#
OD
FL
RATE
ENDS
SOLID
HT
0.042
020-086
0.3750
0.78
7.40
SQ
WA-100
.3750 *
1.00
20.00
S&G
124
0.2188
1.50
61.04
SQ
0.615
WA-101
.3750 *
1.50
14.00
S&G
WA-102
.3750 *
2.00
12.00
WA-103
.3750 *
2.50
8.00
WA-104
.3750 *
3.00
6.00
167 **
0.3125
2.38
0.043
0.047
0.048
0.051
WIRE
STOCK#
OD
FL
RATE
ENDS
SOLID
HT
0.378
1-2-54
.5000 *
18.00
2.32
P
0.440
5-8-54
.6250 *
18.00
1.42
P
5-16-55
.3125 *
10.00
11.45
0.630
3-8-55
.3750 *
10.00
S&G
0.815
7-16-55
.4375 *
S&G
1.030
1-2-55
.5000 *
S&G
1.210
020-057
.6560 X
(conical)
0.9380
0.055
0.058
SQ
0.062
WIRE
STOCK#
OD
FL
RATE
ENDS
SOLID
HT
3.890
WA-111
.6250 *
1.00
57.00
S&G
0.420
2.920
WA-112
.6250 *
1.50
34.00
S&G
0.585
P
4.400
415
0.5625
1.75
46.90
SQ
0.720
7.03
P
3.300
WA-113
.6250 *
2.00
32.00
S&G
0.810
10.00
4.49
P
3.300
16
0.6250
2.00
38.07
SQ
0.648
10.00
2.33
P
3.850
WA-114
.6250 *
2.50
26.00
S&G
0.920
0.94
5.08
SQ
0.363
WA-115
.6250 *
3.00
20.00
S&G
1.070
C-12
.6250 *
3.00
17.50
SQ
3-8-43
0.3750
10.00
2.19
P
3.010
WA-105
.5000 *
1.00
58.00
S&G
0.490
WA-116
.6250 *
3.50
18.00
S&G
37
0.4688
1.13
15.66
SQ
0.423
80x
0.5000
1.43
42.13
SQ
0.558
C-13
.6250 *
4.00
11.00
SQ
95X
0.3125
1.50
24.97
SQ
0.705
WA-106
.5000 *
1.50
42.00
S&G
0.690
WA-117
.6250 *
4.00
16.00
S&G
1.600
428
0.3125
1.50
24.97
SQ
0.705
WA-107
.5000 *
2.00
32.00
S&G
0.915
60
0.6875
9.50
4.61
SQ
2.808
96X
0.3750
1.50
15.29
SQ
0.752
89X
0.6250
2.00
14.47
SQ
0.682
C-4
.6250 *
10.00
5.70
P
412
0.4375
1.75
11.82
SQ
0.611
WA-108
.5000 *
2.50
25.00
S&G
1.050
360
0.6875
12.00
3.19
P
82X
0.5000
1.75
10.77
SQ
0.470
41
0.5000
2.81
13.30
SQ
1.364
9-16-72
.5625 *
18.00
5.30
P
5.180
12
.4375 X
2.00
SQ
517
0.5000
3.00
11-16-72
.6875 *
18.00
3.17
P
4.210
(TAPER)
0.6875
WA-109
.5000 *
3.00
24.00
S&G
1.235
3-8-75
.3750 *
10.00
27.77
P
5.250
513
0.3750
3.00
SQ
43
0.6875
3.00
7.25
SQ
0.930
7-16-75
.4380 *
10.00
19.81
P
4.130
26
0.4375
3.00
8.44
SQ
0.799
32
0.4375
3.25
22.37
SQ
1.302
1-2-75
.500 *
10.00
15.03
P
3.380
425
0.4375
3.00
8.44
SQ
0.799
55
0.8125
3.25
3.35
SQ
1.116
020-058**
.6250 X
1.00
33.45
S&G
0.440
33
0.3281
3.31
13.17
SQ
1.269
WA-110
.5000 *
3.50
18.00
S&G
1.500
(conical)
0.7500
45
0.7500
3.38
1.44
SQ
0.799
521
0.6250
4.00
020-070**
0.844
1.09
21.50
S&G
0.360
523
0.7500
4.00
527
1.0000
6.00
SQ
39
0.6875
1.50
65.81
SQ
0.560
1-4-47
.2500 *
10.00
9.35
P
4.700
C-3
.5000 *
10.00
5.00
P
020-063
0.9380
2.03
16.00
S&G
0.640
5-16-47
.3125 *
10.00
6.06
P
3.530
3-8-62
.3750 *
10.00
12.36
P
4.030
35
0.6875
2.38
77.54
SQ
1.280
3-8-47
.3750 *
10.00
2.67
P
4.000
7-16-62
.4375 *
10.00
6.90
P
4.030
020-068
0.6250
2.84
30.00
S&G
1.080
7-16-47
.4375 *
10.00
1.87
P
3.290
1-2-62
.5000 *
10.00
7.11
P
2.400
020-107
0.7500
3.35
16.00
DB
1-2-47
.5000 *
10.00
1.10
P
3.530
C-123
.4375 *
11.00
P
47
0.8750
3.44
11.71
SQ
020-052
0.3750
11.50
2.71
P
4.240
C-122
.5000 *
11.00
P
C-14
.7500 *
3.50
19.00
SQ
337
0.5000
12.00
1.50
P
2.397
C-121
.5625 *
11.00
P
525
0.7500
4.00
299-B
0.5938
12.00
0.64
P
3.196
C-120
.6250 *
11.00
P
C-15
.7500 *
4.50
10.00
SQ
345
0.7500
12.00
0.39
P
2.491
C-119
.6875 *
11.00
P
48
0.4375
5.00
34.97
SQ
020-088
0.3750
2.03
11.00
S&G
0.998
C-118
.7500 *
11.00
P
020-092
0.5000
2.06
5.60
SQ
0.808
332
0.4375
12.00
5.44
P
4.650
380
0.5000
12.00
4.21
P
3.782
389
0.6250
12.00
2.29
P
3.286
SQ
SQ
SQ
C-10
.5000 *
2.50
4.00
SQ
020-089
0.4380
2.63
7.20
S&G
C-11
.5000 *
3.50
2.80
SQ
355
0.8125
12.00
1.20
P
2.666
C-2
.2500 *
10.00
3.10
P
9-16-62
.5625 *
18.00
1.86
P
6.420
020-053
0.3590
12.00
2.20
P
5.273
11-16-62
.6875 *
18.00
1.87
P
3.350
020-061
.531 X
3.50
1.83
SQ
0.714
13-16-62
.8125*
18.00
1.25
P
2.790
0.950
0.063
(BARREL)
1.031X
0.86
020-094
0.3750
2.13
425.00
S&G
1.147
0.053
020-090
0.4690
2.50
12.00
S&G
0.918
020-091
0.5000
2.50
18.00
S&G
1.000
0.054
85X
0.6250
1.56
6.66
SQ
0.702
020-051
0.5160
12.00
2.80
P
5.438
13
0.5000
1.75
13.77
SQ
0.702
0.068
11-16-68
.6875 *
18.00
2.26
P
4.280
020-093
0.4380
2.00
15.40
SQ
0.972
0.070
020-123
0.6000
1.50
40.00
S&G
0.560
411
.3125 X
2.00
0.072
020-087
.2810 X
0.91
56.00
SQ
0.522
(conical)
0.5310
020-060
0.5000
0.97
52.00
S&G
0.612
(TAPER)
0.5625
020-050
0.6250
11.50
SQ
1.22
P
3.564
0.075
0.080
1.280
3.816
1.040
SQ
3.040
15
COMPRESSION
®
WIRE
0.080
0.085
OD
FL
RATE
ENDS
SOLID
HT
3.000
WIRE
STOCK#
OD
FL
RATE
ENDS
SOLID
HT
020-048
0.8750
10.00
3.20
P
C-102
1.125 *
11.00
P
C-5
.7500 *
10.00
6.50
P
C-101
1.250 *
11.00
P
C-117
.5000 *
11.00
P
C-100
1.500 *
11.00
P
299-C
0.8750
12.00
22.34
P
020-115
0.7190
0.87
550.00
S&G
0.625
020-120
1.3120
1.25
92.12
SQ
0.687
C-116
.6250 *
11.00
P
C-115
.7500 *
11.00
P
C-114
.8750 *
11.00
P
0.125
3.840
C-113
1.000 *
11.00
P
020-114
0.7500
1.75
220.00
S&G
1.063
C-112
1.250 *
11.00
P
15-16-125
.9380 *
18.00
14.52
P
6.190
020-049
0.7340
12.00
17-16-125
1.062 *
18.00
13.61
P
4.500
3.80
P
4.880
347
0.9062
12.00
2.68
P
3.200
9-8-125
1.125 *
18.00
7.89
P
3.600
13-16-80
.8120 *
18.00
3.85
P
3.600
19-16-125
1.188 *
18.00
9.10
P
4.500
15-16-80
.9380 *
18.00
14.52
P
6.190
020-066
0.8590
2.59
154.00
S&G
1.485
0.135
7-16-85
.4380 *
10.00
31.15
P
5.100
59
1.0000
3.75
67.06
SQ
1.890
17-16-85
1.062*
18.00
2.21
P
7.290
367
1.0000
12.00
30.74
P
3.375
0.090
19-16-90
1.188 *
18.00
2.77
P
2.840
369
1.2500
12.00
19.14
P
2.565
0.091
14
0.6250
1.75
99.59
SQ
0.864
9-8-135
1.125 *
18.00
9.98
P
6.190
413
0.6250
1.75
99.59
SQ
0.864
.141
X 0.187
020-124
0.9060
0.75
1632.00
S&G
0.494
0.145
020-122
0.9950
2.50
130.00
S&G
1.400
0.148
020-121
0.6880
1.06
1230.00
S&G
0.814
0.092
1-2-91
.5000 *
10.00
32.54
P
4.550
299-A
0.7500
12.00
8.20
P
3.913
020-064
0.8750
3.06
21.80
S&G
1.098
C-111
.6250 *
11.00
C-110
.7500 *
11.00
P
1.000 *
11.00
P
C-108
1.125 *
11.00
P
C-107
1.250 *
11.00
P
C-106
1.375 *
11.00
P
020-106
0.8750
6.00
12.20
DB
7-8-98
.8750 *
18.00
14.52
P
6.190
8-8-98
1.000 *
18.00
5.72
P
3.440
0.102
020-109
0.5620
4.38
42.15
S&G
2.344
0.105
020-059
0.5310
1.03
436.00
SQ
0.950
57
0.7500
3.00
59.19
SQ
1.470
49
0.9690
3.75
27.18
SQ
1.365
158.00
S&G
1.952
020-067
0.6880
4.06
529
1.0000
6.00
11-8-148
1.375 *
18.00
12.83
P
4.460
13-8-148
1.625 *
18.00
8.09
P
3.990
15-8-148
1.875 *
18.00
4.66
P
4.660
0.162
371
1.5000
12.00
22.96
P
3.078
0.187
373
1.5000
12.00
45.68
P
3.366
0.205
375
1.7500
12.00
34.42
P
4.305
0.207
020-119
0.9380
1.00
2800.00
S&G
0.880
0.225
020-118
1.1720
1.06
2400.00
S&G
0.845
0.281
020-117
1.4680
1.25
3960.00
S&G
1.124
P
C-109
0.098
16
STOCK#
SQ
C-105
.7500 *
11.00
P
C-104
1.000 *
11.00
P
C-103
1.125 *
11.00
020-047
0.8750
12.00
8.00
P
P
5.170
349
1.0000
12.00
7.17
P
3.675
0.106
020-072
0.7500
2.62
66.40
S&G
1.166
0.115
1-2-115
.5000 *
10.00
91.47
P
6.330
0.120
020-065
0.8750
2.00
110.00
S&G
0.964
020-062
1.0150
2.56
56.00
S&G
1.148
58
1.2500
4.62
20.65
SQ
1.560
56
1.0310
5.37
28.06
SQ
2.040
61
0.9380
9.87
20.24
SQ
3.600
LEGEND
**
*
P
S&G
SQ
DB
DENOTES BRASS SPRING
DENOTES HOLE DIAMETER
PLAIN ENDS NOT SQUARED
OR GROUND
SQUARED AND GROUND ENDS
SQUARED ENDS
DRAW BAR SPRING
Can’t find what you are lookin for?
Give us a call; we’ll have it made to your specs.
EXTENSION
®
P
STOCK#
OD
FL
RATE
ENDS
P
STOCK#
OD
FL
RATE
ENDS
0.014
020-042
0.188
1.00
0.19
P
0.034
E-1
0.250
10.00
0.65
P
E-229
0.250
11.00
P
0.035
6
0.375
2.00
1.58
FLC
0.016
RATE
ENDS
0.70
DFL
0.042
442
0.218
1.75
38.96
LHC
402
0.250
2.34
9.94
FLC
0.047
443
0.250
1.68
56.06
LHC
97X
0.375
2.18
6.84
FLC
4.78
0.120
0.62
3.30
FLC
91X
0.281
2.43
2.75
FLS
0.75
2.50
FLC
2
0.250
2.50
3.86
DFL
020-139
0.120
0.88
2.00
FLC
506
0.250
2.50
P
403
0.250
3.00
3.08
FLC
11
0.375
2.68
FLC
512
0.375
3.00
FLC
514
0.375
3.00
E-228
0.250
11.00
0.250
1.00
0.88
FLC
FLS
FLC
020-040
0.234
1.12
0.75
FLC
51
0.344
4.00
1.10
LHC
29
0.437
3.68
1.88
FLS
E-7
0.250
1.50
0.47
FLC
020-016
0.266
6.12
1.10
FLS
52
0.437
5.00
2.26
LHC
1
0.156
1.87
1.13
FLS
020-010
0.328
6.50
0.58
FLC
532
0.468
6.00
502
0.187
2.00
FLC
302
0.250
12.00
0.63
P
50
0.468
6.75
1.35
LHC
1.32
LHC
441
0.344
2.00
0.26
LHC
351
0.344
12.00
0.21
P
020-006
0.375
10.00
020-035**
0.156
2.06
0.50
FLC
306
0.375
12.00
0.16
P
E-214
0.375
11.00
93X
0.250
2.31
0.28
FLC
352
0.437
12.00
0.10
P
E-213
0.500
11.00
P
504
0.250
2.50
0.036
162 **
0.312
0.81
FLS
E-212
0.625
11.00
P
160 **
0.250
0.87
DFL
E-211
0.750
11.00
0.037
020-146
0.360
1.50
3.40
FLC
329
0.437
12.00
FLC
404
0.281
2.50
E-227
0.250
11.00
0.13
P
E-226
0.312
11.00
P
020-147
0.360
1.75
2.89
FLC
020-140
0.180
1.00
FLC
020-148
0.360
2.00
2.20
FLC
2.80
FLC
020-141
0.180
1.12
2.40
FLC
020-142
0.180
1.25
2.00
FLC
0.34
0.040
0.048
FLC
P
P
0.47
P
350
0.468
12.00
0.37
P
020-037
0.344
1.44
15.00
FLC
86X
0.188
2.00
7.97
FLC
E-10
0.500
2.50
2.40
FLC
020-039**
0.300
1.13
5.25
FLC
E-11
0.500
3.00
2.00
FLC
LHC
E-8
0.375
1.50
5.25
FLC
020-027
0.344
5.37
2.60
FLC
DFL
E-9
0.375
2.00
3.00
FLC
020-015
0.297
5.75
4.40
FLS
440
0.312
2.50
0.025
158
0.250
0.75
111-D
0.250
0.87
2.99
DFL
0.026
020-143
0.240
1.37
1.80
FLC
0.032
FL
16.00
0.120
E-6
0.029
OD
0.297
020-137
0.018
0.028
STOCK#
020-152
020-138
0.020
0.022
P
0.041
111B **
0.281
1.06
28.21
DFL
020-009
0.438
6.43
1.10
FLC
78X
0.312
1.68
7.30
FLC
020-007
0.344
8.12
1.60
FLC
020-144
0.240
1.50
1.60
FLC
88X
0.375
2.00
3.97
FLC
E-2
0.375
10.00
1.06
P
020-145
0.240
1.75
1.30
FLC
445
0.312
2.06
8.72
LHC
020-153
0.344
16.00
0.98
DFL
1.81
57.83
020-011
0.156
6.62
E-225
0.250
11.00
FLC
68X
0.312
2.18
5.50
FLC
0.049
444
0.218
2.18
P
100X
0.468
2.25
1.60
FLS
0.051
164 **
0.312
1.09
DFL
166 **
0.281
1.15
DFL
3.89
FLS
E-224
0.312
11.00
P
510
0.312
2.50
E-223
0.375
11.00
P
4
0.312
2.68
168 **
0.312
1.25
75X
0.234
1.50
2.91
FLC
DFL
10
0.406
2.75
1.74
FLS
FLC
410
0.406
2.75
1.74
FLS
020-020
0.250
4.00
0.81
FLC
020-019
0.375
3.25
1.90
FLC
020-017
0.250
5.75
0.59
FLC
36
0.312
3.43
2.96
FLS
0.58
FLS
81X
0.187
1.68
5.67
FLC
516
0.500
3.50
406
0.250
1.87
1.76
FLC
30
0.500
3.81
FLC
401
0.187
2.00
3.85
FLC
46
0.656
4.87
0.18
FLS
020-008
0.172
9.06
1.00
FLC
020-026
0.312
5.00
5.23
FLC
111-A
0.312
1.25
3.70
DFL
020-018
0.250
5.34
4.30
520
0.625
6.00
83X
0.218
2.00
4.70
FLC
70X
0.312
2.12
1.43
FLC
38
0.281
6.50
3
0.250
2.25
2.36
FLS
E-218
0.312
11.00
508
0.312
2.50
FLC
FLC
2.02
FLS
P
FLC
E-217
0.375
11.00
P
E-216
0.500
11.00
P
E-222
0.250
11.00
P
E-221
0.312
11.00
P
E-215
0.625
11.00
E-220
0.375
11.00
P
310
0.375
12.00
E-219
0.500
11.00
P
LHC
P
0.37
P
330
0.500
12.00
0.14
P
346
0.656
12.00
0.06
P
17
EXTENSION
®
WIRE
STOCK#
OD
FL
RATE
ENDS
0.054
73X
0.437
1.94
12.41
FLC
0.062
0.063
0.072
0.080
18
WIRE
STOCK#
OD
FL
RATE
ENDS
WIRE
STOCK#
OD
FL
RATE
ENDS
020-012
0.547
5.62
10.00
FLC
0.107
020-095
0.718
2.00
90.86
MH
FLC
0.113
020-113
0.625
4.00
70.00
FLC
DTL
0.120
020-029
0.875
6.00
18.50
MH
368
1.000
12.00
4.42
8
0.468
2.44
6.43
FLS
44
0.625
5.87
6.23
408
0.468
2.44
6.43
FLS
42
0.500
6.00
12.81
020-014
0.375
5.50
4.00
FLC
524
0.750
6.00
447
0.344
6.87
9.91
LHC
E-15
0.750
6.00
4.00
FLC
0.128
534
1.125
5.75
020-005
0.359
10.00
2.30
FLC
020-111
0.750
6.25
3.30
FLC
0.135
020-030
1.062
8.00
13.48
MH
1.70
FLC
P
MH
020-154
0.375
16.00
1.34
DFL
E-5
0.750
10.00
P
370
1.250
12.00
3.92
P
66X
0.375
2.19
31.84
FLC
E-206
0.625
11.00
P
372
1.500
12.00
2.14
P
5
0.500
2.31
11.93
FLS
E-205
0.750
11.00
P
0.148
020-100
1.125
10.00
14.00
MH
405
0.500
2.31
11.93
FLS
E-204
1.000
11.00
P
0.162
020-101
1.250
12.00
12.60
MH
9
0.437
2.93
12.88
FLC
020-158
0.984
15.12
0.47
MH
0.177
020-102
1.375
14.00
13.00
MH
409
0.437
2.93
12.88
FLC
63
0.750
10.25
28.75
LHC
0.187
374
1.750
12.00
7.29
P
426
0.500
3.50
8.42
FLC
363
0.750
12.00
2.63
P
376
2.000
12.00
4.67
P
020-104
1.250
7.62
13.48
MH
020-103
1.562
16.00
16.50
MH
020-105
1.812
8.18
65.00
MH
FLC
0.091
0.092
518
0.500
3.50
020-116
0.906
6.75
3.00
FLC
E-12
0.625
3.50
3.50
FLC
020-001
0.875
10.00
2.50
MH
27
0.500
3.62
6.26
DFL
E-203
0.750
11.00
P
E-13
0.625
4.00
2.80
FLC
E-202
1.000
11.00
P
34
0.750
1.75
108.52
MH
432
0.750
1.75
108.52
MH
020-025
0.531
5.25
1.91
SW
40
0.656
5.37
1.47
DTL
0.105
0.207
0.250
LEGEND
522
0.625
6.00
FLC
526
0.750
1.75
MH
020-112
0.734
6.00
0.93
FLC
612
0.750
1.75
MH
448
0.500
6.12
5.97
LHC
31
0.750
1.93
81.39
MH
449
0.343
7.50
17.91
LHC
433
0.750
1.93
81.39
MH
62
0.500
9.75
1.80
DFL
434
0.750
2.18
68.11
MH
E-3
0.500
10.00
1.60
P
1012
0.750
2.18
020-004
0.500
10.00
2.09
FLC
28
0.750
2.31
54.26
MH
E-210
0.500
11.00
P
435
0.750
2.31
54.26
MH
E-209
0.625
11.00
P
528
0.750
2.37
E-208
0.750
11.00
P
020-032
0.750
2.59
46.00
MH
Pdenotes plain ends
without hook or loop
E-207
1.000
11.00
P
436
0.750
2.62
46.51
MH
SWdenotes swivel hooks
362
0.500
12.00
1.31
P
1412
0.750
2.62
340
0.625
12.00
0.62
P
437
0.750
2.81
020-023
0.734
4.06
1.73
FLC
1612
0.750
2.81
MH
020-022
0.484
4.50
6.20
FLC
530
0.750
3.00
MH
020-028
0.438
5.25
6.50
FLC
020-097
0.750
3.00
41.03
MH
020-155
0.422
16.00
2.20
DFL
438
0.750
3.00
36.17
MH
MH
MH
MH
40.69
DFLdenotes double full
loop centered
DTLdenotes double twisted
full loop over center
FLCdenotes full loop
from center
FLSdenotes full loop
from side
LHCdenotes long round
end hook over center
MHdenotes machine hooks
**denotes brass springs
MH
914
0.500
1.62
MH
1812
0.750
3.00
446
0.562
3.62
6.80
LHC
439
0.750
3.37
MH
53
0.562
3.94
8.43
FLS
2112
0.750
3.37
MH
450
0.562
6.62
9.49
LHC
2512
0.750
3.81
MH
E-4
0.625
10.00
1.50
P
020-099
0.688
3.87
32.83
MH
020-003
0.625
10.00
2.10
FLC
020-024
0.719
4.00
30.78
MH
020-002
0.812
10.00
0.75
FLC
210
0.750
5.50
17.55
FLC
020-156
0.438
16.00
4.06
FLC
64
0.750
8.00
10.90
FLC
020-034
0.500
1.62
74.93
MH
020-031
1.000
8.50
3.96
1114
0.500
1.68
MH
E-201
0.750
11.00
020-033
0.750
2.65
10.30
MH
E-200
1.000
11.00
E-14
0.750
5.00
5.00
FLC
366
0.875
12.00
3.38
P
020-013
0.562
5.50
10.50
MH
020-108
1.125
16.00
3.00
DFL
31.00
MH
MH
P
P
SPRING
BOXED ASSORTMENTS
®
Compression Spring
Assortment Set - No. 299
Extension Spring
Assortment Set - No. 300
400 Pc. Spring
Assortment - Set No. 400
Can be cut to any desired size
reorders of individual springs
can be refilled.
Can be cut to any size, reorders
of individual springs can be
refilled.
Metal Wall Display with 50 Mounted Springs!
2-Drawer Metal Cabinet with 52 Compartments.
Wire Size: .032” to .205”
Spring Diameter: 3/8” to 1 3/4”
Length: 12”
18 pieces
Wire Size: .035" to .187"
Spring Diameter: 1/4" to 2"
Length: 12”
18 pieces
Stock
Number
Wire
O.D.
Spring
Rate
Max Load
Stock
Number
Wire
O.D.
Spring
Rate
Max Load
377
0.032
0.375
.373
3.275
302
0.035
0.250
.634
6.501
299B
0.047
0.593
.640
5.639
306
0.035
0.375
.160
4.552
337
0.047
0.500
1.500
7.923
351
0.035
0.344
.214
4.960
345
0.047
0.750
.388
3.692
352
0.035
0.438
.097
3.888
332
0.062
0.437
5.443
19.051
310
0.041
0.375
.373
7.133
355
0.062
0.812
1.198
10.789
330
0.041
0.500
.144
5.388
380
0.062
0.500
4.213
16.852
346
0.041
0.656
.059
4.098
389
0.062
0.625
2.289
13.734
329
0.047
0.438
.465
8.870
360
0.072
0.687
3.186
19.116
350
0.047
0.469
.367
8.261
347
0.080
0.906
2.676
19.404
340
0.062
0.625
.618
13.608
299A
0.091
0.750
8.201
33.829
362
0.062
0.500
1.312
16.677
349
0.105
1.000
7.168
37.633
363
0.091
0.750
2.632
33.385
0.105
0.875
3.378
42.198
299C
0.120
0.875
22.342
61.441
366
367
0.135
1.000
30.738
74.940
368
0.120
1.000
4.418
54.061
369
0.135
1.250
19.135
61.004
370
0.135
1.250
3.919
60.500
371
0.162
1.500
22.962
86.110
372
0.135
1.500
2.136
108.941
373
0.187
1.500
45.680
125.621
374
0.187
1.750
7.287
108.941
375
0.205
1.750
34.419
141.981
376
0.187
2.000
4.669
95.903
Springs may be ordered individually
Springs may be ordered individually
Round Music Wire Springs - Medium Duty
Stock Number
Hole Diameter
Free Length
Wire Diameter
Maximum Pressure
Load to Deflect 1/8” in Pounds
WA100
3/8”
1”
.042
10 lbs.
2-1/2
WA101
3/8”
1-1/2”
.042
10 lbs.
1-1
WA102
3/8”
2”
.042
10 lbs.
1
WA103
3/8”
2-1/2”
.042
10 lbs.
3/4
WA104
3/8”
3”
.042
10 lbs.
1/2
WA105
1/2”
1”
.062
20 lbs.
5
WA106
1/2”
1-1/2”
.062
20 lbs.
3
WA107
1/2”
2”
.062
20 lbs.
2-1/2
WA108
1/2”
2-1/2”
.062
20 lbs.
2-1/4
WA109
1/2”
3”
.062
20 lbs.
2
WA110
1/2”
3-1/2”
.062
20 lbs.
1-3/4
WA111
5/8”
1”
.072
30 lbs.
7-1/2
WA112
5/8”
1-1/2”
.072
30 lbs.
5
WA113
5/8”
2”
.072
30 lbs.
3-1/2
WA114
5/8”
2-1/2”
.072
30 lbs.
3
WA115
5/8”
3”
.072
30 lbs.
2-3/4
WA116
5/8”
3-1/2”
.072
30 lbs.
2-1/2
WA117
5/8”
4”
.072
30 lbs.
2
• 400 Springs: 50 different numbers contained
in a neatly compartmented 2-drawer steel
cabinet
• Each compartment is clearly numbered to
correspond with the actual numbered items
mounted on the metal display
• Assortment includes springs for windshield
wipers, stoves, gliders, lawnmowers, outdoor
furniture...as well as a multitude of other uses
• Cabinet Size: 8” H x 20” W x 12” D
• Approx. shipping weight: 40 lbs
250 Pc. Spring
Includes Plastic Cabinet & Photo Display
Card Consists of:
• FREE Plastic Cabinet with 15 plastic drawers
• 250 springs (27 different types)
• Colorful counter display card which can also
be hung on the wall
• Springs are ideal for countless, varied uses.
Compact cabinet has compartmented
drawers, clearly numbered for ease of
dispensing.
• Cabinet size: 7 1⁄4” H x 9” W x 6 1⁄2” D
1,000 Pc. Spring
A Complete Spring Department in 2 Sq. Ft. of
Shelf Space.
Includes Free metal display with springs and
4-drawer matching metal cabinet.
• Assortment includes a spring for every need
- sizes No. 1 to 100X
• Springs are neatly contained in 4-drawer
cabinet with numbered compartments
• Cabinet size: 15” H x 20” W x 16” D
• Approx. shipping weight: 90 Lbs
• Convenient cabinet size to fit most all MRO
work areas.
19
For Spring Assortment #750, 400 & 250
REPLACEMENT SPRINGS
EXTENSION – COMPRESSION – TORSION
®
Stock Type of Wire Outside Total Body Type of Spring
Nb Spring Size DiameterLengthLength Ends Rate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
20
E
0.020 0.156 1.875 1.625
E 0.0350.250 2.5002.000
E 0.0320.250 2.2502.000
E 0.0410.312 2.6872.187
E 0.0620.500 2.3121.375
E 0.0350.375 2.0001.250
CC0.041.40x.681.000NA
E 0.0540.468 2.4371.500
E 0.0620.437 2.9372.000
E 0.0410.406 2.7502.000
E 0.0470.375 2.6872.000
DC0.047.43x.682.000NA
C 0.0540.500 1.750NA
C 0.0910.625 1.750NA
T
0.072 0.500 NA
NA
C 0.0720.625 2.000NA
C 0.0410.312 1.375NA
C 0.0200.312 1.500NA
C 0.0320.203 2.250NA
C 0.0150.218 1.625NA
C 0.0220.187 1.312NA
C 0.0320.218 1.250NA
C 0.0260.312 1.875NA
C 0.0410.312 2.312NA
C 0.0230.250 2.000NA
C 0.0470.437 3.000NA
E 0.0620.500 3.6252.562
E 0.1050.750 2.3121.250
E 0.0470.437 3.6873.000
E 0.0410.500 3.8123.000
E 0.1050.750 1.9370.812
C 0.0620.437 3.250NA
C 0.0470.328 3.312NA
E 0.1050.750 1.7500.625
C 0.0800.468 2.375NA
E 0.0410.312 3.4372.875
C 0.0470.468 1.125NA
E 0.0410.281 6.5006.000
C 0.0800.687 1.500NA
E 0.0620.640 5.3754.375
C 0.0620.500 2.812NA
E 0.0800.500 6.0005.000
C 0.0620.687 3.000NA
E 0.0800.625 5.8754.750
C 0.0470.750 3.375NA
E 0.0410.656 4.8754.000
C 0.0800.875 3.437NA
C 0.0800.437 5.000NA
C 0.1050.968 3.750NA
E 0.0470.468 6.7503.312
E 0.0350.343 4.0002.375
E 0.0470.437 5.0002.125
E 0.0720.562 3.9372.875
C 0.0410.468 5.250NA
C 0.0620.812 3.250NA
C 0.1201.032 5.375NA
C 0.1050.750 3.000NA
C 0.1201.250 4.625NA
C 0.1351.000 3.750NA
C 0.0720.687 3.750NA
C 0.1200.937 9.500NA
A CD
A
A
A
B
Z
A
B
A
A
Z
Z
Z
Y
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
CD
D
A
A
D
Z
Z
D
Z
A
Z
A
Z
ED
Z
ED
Z
F
Z
A
Z
Y
Z
G
G
G
A
Z
Z
Z
Z
Z
Z
Z
Z
Max.
Load
tock Type of Wire Outside Total Body Type of Spring
S
Nb Spring Size Diameter Length Length Ends Rate
Max.
Load
1.13
3.86
2.36
3.89
11.93
1.58
1.87
5.80
4.45
7.23
14.74
3.74
6.43
12.88
1.74
4.78
10.43
16.77
5.35
8.77
62
63
64
65
66X
67X
68X
69X
70X
71X
72X
73X
74X
75X
76X
77X
78X
79X
80X
81X
82X
83X
84X
85X
86X
87X
88X
89X
90X
91X
92X
93X
94X
95X
96X
97X
98X
99X
100X
111A
111B
111D
112
115
116
120
122
123
124
125
126
14.62
28.75
44.12
3.82
19.24
3.95
7.28
1.21
3.48
2.24
2.47
11.06
1.80
3.16
18.99
4.22
7.14
15.30
37.03
3.96
13.79
5.32
4.80
5.64
13.52
14.31
5.91
19.60
6.56
5.18
7.62
1.10
3.76
31.41
11.43
8.92
14.85
1.48
4.60
3.33
8.99
2.11
7.09
.39
14.85
.59
8.04
1.42
64.02
3.84
1.52
13.77 14.43
99.59 88.19
38.07 51.47
29.14 28.13
.93 1.02
8.37 8.39
.45 .59
2.44 2.18
15.61 10.52
2.00 2.87
13.60 21.41
2.02 3.11
8.44 18.59
6.26 14.84
54.26 43.27
1.88 7.44
.58 4.27
81.39 40.25
22.37 43.59
13.17 26.91
108.5244.25
77.54 84.90
2.96 7.26
15.66 10.99
2.02 8.31
65.81 61.86
1.47 11.30
13.30 19.26
12.81 30.88
7.25 15.00
6.23 23.00
1.44 3.78
.18 3.71
11.71 28.08
34.97 68.55
27.18 64.83
1.35 6.92
1.10 4.11
2.26 7.48
8.43 19.70
2.17 9.00
3.35 7.16
28.06 93.60
59.19 90.57
20.65 63.31
67.06 124.74
4.61 30.87
20.24 127.03
E
E
E
C
E
C
E
C
E
C
C
E
C
E
C
C
E
C
C
E
C
E
C
C
E
C
E
C
C
E
C
E
C
C
C
E
C
C
E
E
E
E
C
C
C
C
C
C
C
C
C
0.0620.500
0.091 0.750
0.1050.750
0.0410.625
0.0620.375
0.0280.328
0.0410.312
0.0200.250
0.0320.312
0.0200.187
0.0220.250
0.0540.437
0.0250.312
0.0280.234
0.0410.312
0.0350.375
0.0410.312
0.0410.375
0.0620.500
0.0280.187
0.0470.500
0.0320.218
0.0410.437
0.0540.625
0.0370.187
0.0320.234
0.0410.375
0.0620.625
0.0350.312
0.0350.281
0.0320.312
0.0200.250
0.0250.250
0.0470.312
0.0470.375
0.0470.375
0.0320.250
0.0260.375
0.0410.468
0.0320.312
0.0410.281
0.0260.250
0.0280.250
0.0110.156
0.0310.250
0.0150.218
0.0410.375
0.0260.250
0.0410.218
0.2560.281
0.0200.187
9.7508.750
10.2503.562
8.0006.375
2.687NA
2.1871.437
1.125NA
2.1871.562
2.000NA
2.1251.562
1.500NA
1.875NA
1.9371.000
1.437NA
1.5001.000
2.000NA
1.437NA
1.6871.187
1.937NA
1.437NA
1.6871.250
1.750NA
2.0001.625
1.437NA
1.562NA
2.0001.625
1.750NA
2.0001.187
2.000NA
1.500NA
2.4371.875
1.687NA
2.3121.875
2.000NA
1.500NA
1.500NA
2.1871.437
1.437NA
1.875NA
2.2501.375
1.2500.625
1.0620.468
0.8750.437
1.937NA
2.000NA
1.312NA
1.625NA
1.156NA
2.625NA
1.500NA
2.312NA
0.875NA
CD
G
B
Z
B
Z
B
Z
B
Z
Z
B
Z
B
Z
Z
B
Z
Z
B
Z
B
Z
Z
B
Z
B
Z
Z
A
Z
B
Z
Z
Z
B
Z
Z
A
CD
CD
CD
Z
Z
Z
Z
Z
Z
Z
Z
Z
1.80
9.03
10.90
1.56
31.84
4.67
5.50
.82
1.43
2.24
1.81
12.41
1.75
2.91
14.57
3.70
7.30
10.90
42.13
5.67
10.77
4.70
5.45
6.66
7.97
12.19
3.97
14.47
7.24
2.76
5.72
.28
2.59
24.97
15.29
6.84
14.54
1.00
1.60
3.70
28.21
2.99
5.04
.23
14.54
.45
12.11
1.82
61.04
2.09
3.08
BRASS WIRE SPRINGS #157 TO #162
S
157 C 0.0250.187 2.250NA
Z -
158 E 0.0250.250 0.7500.250 CD -
159 C 0.0210.250 2.500NA
Z -
160 E 0.0360.250 0.8750.375 A -
161 C 0.0170.250 2.000NA
Z -
162 E 0.0360.312 0.8120.312 CD -
Max.
Load
-
-
REPLACEMENT SPRINGS For Spring Assortment #750, 400 & 250
EXTENSION – COMPRESSION – TORSION
®
Stock Type of Wire Outside Total Body Type of Spring
Nb Spring Size DiameterLengthLength Ends Rate
BRASS WIRE SPRINGS #163 TO #168
0.036 0.250
0.0510.312
0.0280.281
0.0510.281
0.0430.312
0.0280.312
Max.
Load
163 164
165
166
167
168
C
E
C
E
C
E
2.500 NA
1.0930.500
2.312NA
1.1560.562
2.375NA
1.2500.687
Z CD
Z
CD
Z
CD
-
-
-
-
-
-
-
-
200
210
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
T 0.0320.250 NA 0.375
E 0.1050.750 5.5004.000
E 0.0280.187 2.0001.625
E 0.0410.250 2.3431.875
E 0.0350.250 3.0002.500
E 0.0200.281 2.5002.000
E 0.0620.500 2.3121.375
E 0.0280.250 1.8751.312
CC0.041.40x.681.000NA
E 0.0540.468 2.4371.500
E 0.0620.437 2.9372.000
E 0.0410.406 2.7502.000
DC0.054.31x.562.000NA
C 0.0470.437 1.750NA
C 0.0910.625 1.750NA
T 0.0720.500 NA NA
C 0.0720.562 1.750NA
C 0.0410.312 1.375NA
C 0.0200.312 1.500NA
C 0.0320.203 2.250NA
C 0.0150.218 1.625NA
C 0.0230.187 1.312NA
C 0.0200.187 1.125NA
C 0.0260.312 1.875NA
C 0.0410.312 2.312NA
C 0.0230.250 2.000NA
C 0.0470.437 3.000NA
E 0.0620.500 3.5002.500
C 0.0280.328 1.125NA
C 0.0470.312 1.500NA
C 0.0200.250 2.000NA
C 0.0250.312 1.437NA
C 0.0320.250 1.437NA
E 0.1050.750 1.7500.625
E 0.1050.750 1.9370.812
E 0.1050.750 2.1871.062
E 0.1050.750 2.3121.250
E 0.1050.750 2.6251.500
E 0.1050.750 2.8121.750
E 0.1050.750 3.0001.875
E 0.1050.750 3.3752.250
E 0.0220.312 2.5001.125
E 0.0200.343 2.0000.532
E 0.0410.218 1.7500.812
E 0.0470.250 1.6870.750
E 0.0470.218 2.1871.187
E 0.0410.312 2.0621.000
E 0.0720.562 3.6250.937
E 0.0540.343 6.4372.812
E 0.0620.500 6.1252.687
E 0.0620.343 7.5003.375
E 0.0720.562 6.6252.562
Y
B
B
B
B
B
A
B
Z
A
B
A
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
D
D
D
D
D
D
D
D
G
GB
G
G
G
GB
G
G
G
G
G
-
17.55 44.24
3.85 4.09
9.94 7.97
3.08 3.08
.13 .99
11.93 14.74
1.76 3.01
-
6.43 10.43
12.88 15.77
1.74 5.35
-
11.82 13.46
99.59 88.19
-
46.90 48.31
29.14 28.13
.93 1.02
8.37 8.39
.46 .59
2.44 2.18
4.11 3.39
2.00 2.87
13.60 21.41
2.02 3.11
8.44 18.59
6.42 14.74
4.67 3.95
24.97 31.41
.82 1.21
1.75 1.80
14.54 14.85
108.5244.25
81.39 40.25
68.11 42.00
54.26 43.27
46.51 43.96
40.69 44.00
36.17 44.81
31.00 45.69
.34 1.32
.26 .79
38.95 11.32
56.06 13.74
57.83 15.62
8.72 7.02
6.80 19.66
9.91 15.03
5.97 14.74
17.91 22.02
9.49 19.65
S
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
532
534
612
914
1012
1114
1412
1612
1812
2112
2512
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
C
E
E
E
E
E
E
E
E
E
E
E
E
0.0200.188 2.000NA
0.0200.188 2.0001.500
0.0200.250 2.000NA
0.0200.250 2.5002.000
0.0350.250 2.000NA
0.0350.250 2.5002.000
0.0320.312 2.000NA
0.0320.312 2.5001.875
0.0410.312 2.000NA
0.0410.312 2.5001.875
0.0350.375 3.000NA
0.0350.375 3.0002.250
0.0470.375 3.000NA
0.0470.375 3.0002.250
0.0410.500 3.000NA
0.0410.500 3.5002.500
0.0620.500 3.000NA
0.0620.500 3.5002.500
0.0410.625 4.000NA
0.0410.625 6.0004.750
0.0620.625 4.000NA
0.0620.625 6.0004.750
0.0470.750 4.000NA
0.0800.750 6.0004.500
0.0800.750 4.000NA
0.1050.750 1.7500.625
0.0621.000 6.000NA
0.1050.750 2.3751.250
0.1051.000 6.000NA
0.1050.750 3.0001.875
0.0470.468 6.0003.312
0.1281.125 5.7504.250
0.1050.750 1.7500.625
0.0800.500 1.6250.812
0.1050.750 2.1871.062
0.0800.500 1.6871.000
0.1050.750 2.6251.500
0.1050.750 2.8121.750
0.1050.750 3.0001.875
0.1050.750 3.3752.250
0.1050.750 3.8122.812
Max.
Load
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
B
Z
D
Z
D
Z
D
G
D
D
D
D
D
D
D
D
D
D
EXPLANATION OF CODES
for Replacement Springs
A=
B=
C=
CC=
CD=
D=
DC=
E=
ED=
G= GB=
NA=
T=
Y=
Z=
FULL LOOP FROM SIDE
FULL LOOP FROM CENTER
COMPRESSION
CONE COMPRESSION
DOUBLE FULL LOOP
MACHINE HOOK
DOUBLE CONE
EXTENSION
DOUBLE TWISTED FULL LOOP OVER CENTER
LONG ROUND END HOOK OVER CENTER
LONG FULL LOOP OVER CENTER
NOT APPLICABLE
TORSION
PLAIN END
SQUARED END
21
KALLER®
GAS SPRINGS
®
Total Length (mm)
Cylinder
Diameter (mm)
94
45 + (2 x Stroke)
M16x1.5/ 16x2
380
45 + (2 x Stroke)
M24x1.5
170
380
45 + (2 x Stroke)
M24x1.5
7,10,12.7,15,19,25,38.1,50,63.5,75,80,100,125
50
110
42 or 45+ (2 x Stroke)
Ø 12
R15
7,10,12.7,15,19,25,38.1,50,63.5,75,80,100,125
70
160
42 or 45 + (2 x Stroke)
Ø 15
R19
7,10,15,25,38.1,50,63.5,80,100,125
90
200
42 or 45 + (2 x Stroke)
Ø 19
Repairable, color coded and fully
adjustable gas springs. Available
with or without threaded
cylinders.
M2
10,12.7,15,16,25,38.1,50,63.5,80,100,125
200
450
42 or 45 + (2 x Stroke)
Ø 25
MM2
10,12.7,15,16,25,38.1,50,63.5,80,100,125
200
450
42 +(2 x Stroke)
M28x1.5
MC3
10,12.7,16,25,38.1,50,63.5,80,100,125
200
450
50 + (2 x Stroke)
Ø 32
Super compact gas springs that
provide extreme forces with
minimal cylinder diameter.
CU 420
6,10,16,25,32,40,50
425
960
56 - 195
Ø 25
CU 740
6,10,16,25,32,40,50
740
1660
63 - 195
Ø 32
CU 1000
6,10,16,25,32,40,50
1060
2380
61 - 230
Ø 38
CU 1800
6,10,16,25,32,40,50
1800
4050
66 - 220
Ø 50
CU 2900
10,16,25,32,40,50,
2950
6630
85 - 205
Ø 63
CU 4700
10,16,25,32,40,50,
4700
10570
80 - 240
Ø 75
CU 7500
10,16,25,32,40,50,
7500
16860
90 - 255
Ø 95
CU 11800
10,16,25,32,40,50,
11800
26530
100 - 260
Ø 120
CU 18300
10,16,25,32,40,50,
18300
41140
110 - 270
Ø 150
X 170
7,10,15,19,25,38,50,63,75,80,100,125
170
380
30 or 35 + (2 x Stroke)
Ø 19
X 320
7,10,15,19,25,38,50,63,75,80,100,125
320
720
30 or 35 + (2 x Stroke)
Ø 25
X 350
10,13,16,19,25,32,38,50,63,75,80,100,125
360
810
30 + (2 x Stroke)
Ø 32
X 500
10,13,16,19,25,32,38,50,63,75,80,100,125
470
1060
30 + (2 x Stroke)
Ø 38
X 750
10,13,16,19,25,32,38,50,63,75,80,100,125
740
1660
32 + (2 x Stroke)
Ø 45
X 1000
13,16,19,25,32,38,50,63,75,80,100,125
920
2070
38 + (2 x Stroke)
Ø 50
X 1500
13,16,19,25,32,38,50,63,75,80,100,125
1500
3370
44 + (2 x Stroke)
Ø 63
X 2400
16,19,25,32,38,50,63,75,80,100,125
2400
5400
45 + (2 x Stroke)
Ø 75
X 4200
16,19,25,32,38,50,63,75,80,100,125
4200
9440
58 + (2 x Stroke)
Ø 95
X 6600
16,19,25,32,38,50,63,75,80,100,125
6630
14910
68 + (2 x Stroke)
Ø 120
X 9500
19,25,32,38,50,63,75,80,100,125
9500
21360
78 + (2 x Stroke)
Ø 150
X 20 000
19,25,32,,38,50,63,75,80,100,125
20000
44960
110 + (2 x Stroke)
Ø 195
TU 250
10,12.7,16,25,38.1,50,63.5,80,100,125
265
600
50 + (2 x Stroke)
Ø 38
TU 500
10,12.7,25,38.1,50,63.5,80,100,125,160
470
1060
85 + (2 x Stroke)
Ø 45
TU 750
12.7,25,38.1,50,63.5,80,100,125,160,200,250,300
740
1660
95 + (2 x Stroke)
Ø 50
TU 1500
25,38.1,50,63.5,80,100,125,160,200,250,300
1500
3370
110 + (2 x Stroke)
Ø 75
TU 3000
25,38.1,50,63.5,80,100,125,160,200,250,300
3000
6740
120 + (2 x Stroke)
Ø 95
TU 5000
25,38.1,50,63.5,80,100,125,160,200,250,300
5000
11240
140 + (2 x Stroke)
Ø 120
TU 7500
25,38.1,50,63.5,80,100,125,160,200,250,300
7500
16860
155 + (2 x Stroke)
Ø 150
TU 10000
25,38.1,50,63.5,80,100,125,160,200,250,300
10600
23830
160 + (2 x Stroke)
Ø 195
SERIES
Description
Model
Available Stoke Lengths (mm)
EP2
Color coded gas Ejector-Pins that
are fully interchangeable with
mechanical spring plungers
EP2 16
EP2 24
“R”
Mini
CU
Power-Line X
TU
Initial Force at
Max Pressure
(daN)
(lbf)
10,20,30,40,50,60,70,80,100,125
42
10,20,30,40,50,60,70,80,100,125
170
EPS2 24
10,16,20,25,30,38,40,50,60,70,80,100,125
Rod Sealed and color coded gas
springs that are compact and
fully adjustable.
R12
The shortest, strongest and most
advanced rod sealed gas springs.
Standard series – dimensions
correspond to the ISO 11901
standard for gas springs.
Accessories, Mounts, Repair and
Tool Kits available.
Other series available: TX: Power Line - Heavy Duty series a crossover between standard TU series
and Power Line X series.
SPC Series: Speed Control has been engineered to reduce or eliminate blank holder bounce
commonly associated with increased return stroke, speeds from link drive presses.
LCF Series: These innovative Low Contact Force series of gas spring are 100% interchangeable
with ISO gas springs (ie. TU Series) and reduce shock loads, noise levels and pad bounce
problems.
Mould Temp - MT 16 to MT1000 - gas springs are compact and powerful piston rod sealed gas
springs, which can be used up to 120°C.
22
SCHNORR®
DISC SPRINGS
®
SCHNORR PRECISION DISC SPRINGS
Pressure P in pounds Deflection f in inch
Ref
O.D.
‘D’
I.D.
‘d’
Thick
‘t’
Deflect
‘h’
Free Ht
‘h+t’
‘h/t’
P
f = .25h P
f = .5h
P
f = .75h
P
f=h
Bolt
Size
Stock
Number
Z1
3/8
0.195
0.0157
0.0119
0.0276
0.758
22
0.0030
0.0060
53
0.0089
65
0.0119
3/16
DS-10
39
Z2
1/2
0.258
0.0196
0.0158
0.0354
0.806
33
0.0040
58
0.0079
76
0.0119
94
0.0158
1/4
DS-20
Z3
1/2
0.258
0.0236
0.0158
0.0394
0.670
52
0.0040
94
0.0079
130
0.0119
162
0.0158
1/4
DS-30
Z4
11/16
0.382
0.0236
0.0197
0.0433
0.835
42
0.0049
72
0.0099
95
0.0148
114
0.0197
3/8
DS-60
Z5
11/16
0.382
0.0275
0.0197
0.0472
0.717
61
0.0049
108
0.0099
147
0.0148
181
0.0197
3/8
DS-70
Z6
3/4
0.320
0.0275
0.0237
0.0512
0.863
57
0.0059
99
0.0119
130
0.0178
155
0.0237
5/16
DS-40
Z7
3/4
0.320
0.0315
0.0236
0.0551
0.750
79
0.0059
141
0.0118
189
0.0177
232
0.0236
5/16
DS-50
Z8
3/4
0.382
0.0315
0.0217
0.0532
0.690
76
0.0054
135
0.0109
187
0.0163
232
0.0217
3/8
DS-80
Z9
3/4
0.382
0.0354
0.0217
0.0571
0.613
102
0.0054
187
0.0109
262
0.0163
330
0.0217
3/8
DS-90
Z10
1
0.445
0.0354
0.0316
0.0670
0.893
96
0.0079
164
0.0158
213
0.0237
252
0.0316
7/16
DS-100
Z11
1
0.445
0.0394
0.0315
0.0709
0.800
123
0.0079
214
0.0158
285
0.0236
346
0.0315
7/16
DS-110
Z12
1
0.445
0.0492
0.0256
0.0748
0.520
175
0.0064
316
0.0128
438
0.0192
548
0.0256
7/16
DS-120
Z12a
1-1/10
0.512
0.0394
0.0354
0.0748
0.899
126
0.0088
214
0.0177
276
0.0266
326
0.0354
1/2
DS-130
Z12b
1-1/10
0.512
0.0492
0.0335
0.0827
0.680
198
0.0084
355
0.1680
485
0.0251
600
0.0335
1/2
DS-140
Z12c
1-1/10
0.512
0.0590
0.0275
0.0866
0.466
247
0.0069
467
0.0138
664
0.0206
853
0.0275
1/2
DS-150
Z13
1-3/8
0.637
0.0492
0.0453
0.0945
0.920
204
0.0113
346
0.0227
444
0.0340
524
0.0453
5/8
DS-160
Z14
1-3/8
0.637
0.0590
0.0434
0.1024
0.736
388
0.0109
629
0.0217
772
0.0326
865
0.0434
5/8
DS-170
Z15
1-3/8
0.637
0.0787
0.0316
0.1103
0.402
412
0.0079
790
0.0158
1144
0.0237
1492
0.0316
5/8
DS-180
Z16
1-1/2
0.761
0.0590
0.0551
0.1141
0.935
381
0.0138
642
0.0276
825
0.0413
970
0.0551
3/4
DS-190
Z17
1-1/2
0.761
0.0787
0.0433
0.1220
0.550
541
0.0108
1050
0.0217
1419
0.0325
1810
0.0433
3/4
DS-200
Z18
1-1/2
0.761
0.0983
0.0355
0.1338
0.361
783
0.0089
1518
0.0178
2210
0.0267
2895
0.0355
3/4
DS-210
Z19
2
1.016
0.0787
0.0590
0.1377
0.750
475
0.0148
841
0.0295
1132
0.0443
1386
0.0590
1
DS-220
Z20
2
1.016
0.0983
0.0591
0.1574
0.602
837
0.0148
1540
0.0296
2155
0.0443
2720
0.0591
1
DS-230
Z21
2
1.016
0.1181
0.0472
0.1653
0.400
1035
0.0118
1980
0.0236
2870
0.0354
3740
0.0472
1
DS-240
Z22
2-3/8
1.016
0.0787
0.0787
0.1574
1.000
609
0.0197
829
0.0394
1045
0.0590
1208
0.0787
1
DS-250
Z23
2-3/8
1.016
0.0983
0.0787
0.1770
0.801
836
0.0197
1460
0.0394
1943
0.0590
2355
0.0787
1
DS-260
FEATURES
Disc springs have a simple circular shape and cannot tangle. Disc springs
do not require special packaging or handling and are very well suited for
feeding in automatic assembly operations.
Disc springs require less volume than coil springs of equivalent energy
absorbing capacity.
Because of their unique shape, disc springs lend themselves to stacking in
parallel, series, or series-parallel combinations. This feature allows systems
of standard springs to be assembled to achieve the required force/
deflection characteristics without having to resort to special designs.
Original SCHNORR®
Safety Washers type “S”
• The “S” Series is suitable for normal duty
and available for screws of size M1.6 to
M36.
• Available in Carbon steel SAE 1060,
Stainless steel and Phosphor bronze
• Available finishes: phosphate (stock),
zinc-plated – clear, zinc-plated – yellow
and stainless steel
If one coil of a coil spring breaks, the spring usually is useless and has to be
replaced. In the unlikely failure of one disc spring in a stack, the remaining
springs continue to function and the operation may continue satisfactorily
until it is convenient to replace the broken disc.
For more details specifications and
deflections on the SCHNORR® Disc Springs
and Safety Washers
In applications that require a spring to rotate at very high speeds, disc
springs offer good resistance to the effects of centrifugal force.
visit our website:
http://productodiemakers.com/schnorr.html
or call our Customer Service department.
Disc springs provide high load-bearing capacity in confined spaces that
would require hydraulic or special designs with conventional springs.
When ordering please specify OD,
ID and thickness.
23
SCHNORR®
DISC SPRINGS
®
mm Size
Inch Size
Inch Dimension
Deflect /
mm Size
Inch Size
Inch Dimension
Deflect /
mm Size
Inch Size
Inch Dimension
Deflect /
O.D.
I.D.
Thick
O.D.
I.D.
Thick
Deflect
Free H
Thick
O.D.
I.D.
Thick
O.D.
I.D.
Thick
Deflect
Free H
Thick
O.D.
I.D.
Thick
O.D.
I.D.
Thick
Deflect
Free H
Thick
6
3.2
0.3
.236
.126
.0118
.0059
.0177
.500
20
8.2
0.9
.787
.323
.0354
.0217
.0571
.611
35.5
18.3
1.25
1.40
.720
.0492
.0394
.0886
.800
8
3.2
0.2
.315
.126
.0079
.0079
.0157
1.000
20
8.2
1.0
.787
.323
.0394
.0216
.0610
.550
35.5
18.3
2.0
1.40
.720
.0787
.0315
.1103
.400
8
3.2
0.3
.315
.126
.0118
.0098
.0216
.833
20
10.2
0.8
.787
.402
.0315
.0217
.0532
.690
40
14.3
1.25
1.57
.563
.0492
.0551
.1043
1.120
8
3.2
0.4
.315
.126
.0157
.0079
.0236
.500
20
10.2
0.9
.787
.402
.0354
.0217
.0571
.611
40
14.3
1.50
1.57
.563
.0591
.0492
.1083
.833
8
4.2
0.2
.315
.165
.0079
.0118
.0197
1.500
20
10.2
1.0
.787
.402
.0394
.0217
.0611
.550
40
14.3
2.0
1.57
.563
.0787
.0413
.1200
.525
8
4.2
0.3
.315
.165
.0118
.0098
.0216
.833
20
10.2
1.1
.787
.402
.0433
.0177
.0610
.409
40
16.3
1.5
1.57
.642
.0591
.0512
.1103
.867
8
4.2
0.4
.315
.165
.0157
.0079
.0236
.500
20
10.2
1.25
.787
.402
.0492
.0197
.0690
.400
40
16.3
2.0
1.57
.642
.0787
.0433
.1220
.550
10
3.2
0.3
.394
.126
.0118
.0136
.0256
1.167
20
10.2
1.5
.787
.402
.0591
.0118
.0708
.200
40
18.3
2.0
1.57
.720
.0787
.0453
.1240
.575
10
3.2
0.4
.394
.126
.0157
.0118
.0275
.750
22.5
11.2
0.8
.886
.441
.0315
.0256
.0571
.813
40
20.4
1.0
1.57
.803
.0394
.0512
.0950
1.300
10
3.2
0.5
.394
.126
.0197
.0098
.0295
.500
22.5
11.2
1.25
.886
.441
.0492
.0197
.0689
.400
40
20.4
1.5
1.57
.803
.0591
.0453
.1044
.767
10
4.2
0.4
.394
.165
.0157
.0118
.0275
.750
23
8.2
0.7
.906
.323
.0276
.0315
.0591
1.144
40
20.4
2.0
1.57
.803
.0787
.0433
.1220
.550
10
4.2
0.5
.394
.165
.0197
.0098
.0295
.500
23
8.2
0.8
.906
.323
.0315
.0295
.0610
.938
40
20.4
2.25
1.57
.803
.0886
.0354
.1240
.400
10
5.2
0.4
.394
.205
.0157
.0118
.0275
.750
23
8.2
0.9
.906
.323
.0354
.0276
.0630
.778
40
20.4
2.5
1.57
.803
.0984
.0374
.1358
.380
10
5.2
0.5
.394
.205
.0197
.0098
.0295
.5008
23
8.2
1.0
.906
.323
.0394
.0276
.0669
.700
45
22.4
1.25
1.77
.882
.0492
.0650
.1142
1.320
12
4.2
0.4
.472
.165
.0157
.0157
.0314
1.000
23
10.2
0.9
.906
.402
.0354
.0295
.0649
.833
45
22.4
1.75
1.77
.882
.0689
.0512
.1201
.744
12
4.2
0.5
.472
.165
.0197
.0138
.0335
.700
23
10.2
1.0
.906
.402
.0394
.0276
.0670
.700
45
22.4
2.5
1.77
.882
.0984
.0394
.1378
.400
12
4.2
0.6
.472
.165
.0236
.0157
.0394
.670
23
10.2
1.25
.906
.402
.0492
.0256
.0748
.520
50
18.4
1.25
1.97
.724
.0492
.0630
.1122
1.280
12
5.2
0.5
.472
.205
.0197
.0157
.0354
.800
23
12.2
1.0
.906
.480
.0394
.0236
.0630
.600
50
18.4
1.5
1.97
.724
.0591
.0709
.1300
1.200
12
5.2
0.6
.472
.205
.0236
.0138
.0374
.583
23
12.2
1.25
.906
.480
.0492
.0236
.0728
.480
50
18.4
2.0
1.97
.724
.0787
.0591
.1378
.750
12
6.2
0.5
.472
.244
.0197
.0138
.0335
.700
23
12.2
1.5
.906
.480
.0591
.0236
.0827
.400
50
18.4
2.5
1.97
.724
.0984
.0630
.1615
.640
12
6.2
0.6
.472
.244
.0236
.0138
.0374
.583
25
10.2
1.0
.984
.402
.0394
.0295
.0689
.750
50
18.4
3.0
1.97
.724
.1181
.0551
.1731
.470
12.5
5.2
0.5
.492
.205
.0197
.0138
.0340
.700
25
12.2
0.7
.984
.480
.0276
.0354
.0630
1.290
50
20.4
2.0
1.97
.803
.0787
.0591
.1378
.750
12.5
6.2
0.5
.492
.244
.0197
.0138
.0335
.700
25
12.2
0.9
.984
.480
.0354
.0276
.0630
.778
50
20.4
2.5
1.97
.803
.0984
.0531
.1515
.540
12.5
6.2
0.7
.492
.244
.0275
.0118
.0394
.428
25
12.2
1.0
.984
.480
.0394
.0315
.0709
.800
50
22.4
2.0
1.97
.882
.0787
.0630
.1417
.800
.560
50
22.4
2.5
1.97
.882
.0984
.0551
.1535
.560
.367
50
25.4
1.25
1.97
1.00
.0492
.0630
.1122
1.280
1.187
50
25.4
1.5
1.97
1.00
.0591
.0630
.1220
1.070
.900
50
25.4
2.0
1.97
1.00
.0787
.0551
.1338
.700
.640
50
25.4
2.5
1.97
1.00
.0984
.0551
.1535
.560
.470
50
25.4
3.0
1.97
1.00
.1181
.0433
.1614
.367
28.5
1.5
2.20
1.122
.0591
.0787
.1378
1.330
14
14
15
15
15
15
7.2
7.2
5.2
5.2
5.2
5.2
0.5
0.8
0.4
0.5
0.6
0.7
.551
.551
.591
.591
.591
.591
.283
.283
.205
.205
.205
.205
.0197
.0315
.0157
.0197
.0236
.0276
.0157
.0118
.0217
.0197
.0177
.0157
.0354
.0433
.0374
.0394
.0413
.0433
.800
.375
1.375
1.000
.750
.572
25
25
28
28
28
28
12.2
12.2
10.2
10.2
10.2
10.2
1.25
1.5
0.8
1.0
1.25
1.5
.984
.984
1.10
1.10
1.10
1.10
.480
.480
.402
.402
.402
.402
.0492
.0591
.0315
.0394
.0492
.0591
.0276
.0217
.0374
.0354
.0315
.0276
.0768
.0808
.0689
.0748
.0807
.0866
15
6.2
0.5
.591
.244
.0197
.0197
.0394
1.000
28
12.2
1.0
1.10
.480
.0394
.0374
.0768
.950
56
15
6.2
0.6
.591
.244
.0236
.0177
.0413
.750
28
12.2
1.25
1.10
.480
.0492
.0335
.0827
.680
56
28.5
2
2.20
1.122
.0787
.0630
.1417
.800
15
6.2
0.7
.591
.244
.0276
.0157
.0433
.572
28
12.2
1.5
1.10
.480
.0591
.0295
.0886
.500
56
28.5
3
2.20
1.122
.1181
.0512
.1693
.433
15
8.2
0.7
.591
.323
.0276
.0157
.0433
.572
28
14.2
0.8
1.10
.559
.0315
.0394
.0709
1.250
60
20.5
2
2.36
.807
.0787
.0827
.1614
1.050
15
8.2
0.8
.591
.323
.0315
.0157
.0472
.500
28
14.2
1.0
1.10
.559
.0394
.0315
.0709
.800
60
20.5
2.5
2.36
.807
.0984
.0709
.1693
.720
16
8.2
0.6
.630
.323
.0236
.0177
.0413
.750
28
14.2
1.25
1.10
.559
.0492
.0335
.0827
.680
60
20.5
3
2.36
.807
.1181
.0670
.1850
.570
16
8.2
0.7
.630
.323
.0276
.0177
.0453
.640
28
14.2
1.5
1.10
.559
.0591
.0256
.0847
.433
60
25.5
2.5
2.36
1.004
.0984
.0748
.1732
.760
16
8.2
0.8
.630
.323
.0315
.0157
.0472
.500
31.5
12.2
1.0
1.24
.480
.0394
.0434
.0827
1.100
60
25.5
3
2.36
1.004
.1181
.0651
.1832
.550
16
8.2
0.9
.630
.323
.0354
.0138
.0492
.389
31.5
12.2
1.25
1.24
.480
.0492
.0374
.0866
.760
60
30.5
2.5
2.36
1.201
.0984
.0709
.1693
.720
18
6.2
0.4
.709
.244
.0157
.0236
.0393
1.500
31.5
12.2
1.5
1.24
.480
.0591
.0335
.0925
.570
60
30.5
3
2.36
1.201
.1181
.0669
.1850
.567
18
6.2
0.5
.709
.244
.0197
.0236
.0433
1.200
31.5
16.3
0.8
1.24
.642
.0315
.0434
.0748
1.380
60
30.5
3.5
2.36
1.201
.1378
.0591
.1969
.428
18
6.2
0.6
.709
.244
.0236
.0236
.0472
1.000
31.5
16.3
1.25
1.24
.642
.0492
.0354
.0846
.720
63
31
1.8
2.48
1.22
.0709
.0945
.1654
1.330
18
6.2
0.7
.709
.244
.0276
.0217
.0493
.785
31.5
16.3
1.0
1.24
.642
.0591
.0354
.0945
.600
63
31
2.5
2.48
1.22
.0984
.0689
.1673
.700
18
6.2
0.8
.709
.244
.0315
.0197
.0512
.625
31.5
16.3
1.75
1.24
.642
.0690
.0276
.0966
.400
63
31
3
2.48
1.22
.1181
.0709
.1890
.600
18
8.2
0.5
.709
.323
.0197
.0236
.0433
1.200
31.5
16.3
2.0
1.24
.642
.0787
.0296
.1083
.370
63
31
3.5
2.48
1.22
.1378
.0551
.1929
.400
18
8.2
0.7
.709
.323
.0276
.0217
.0493
.785
34
12.3
1.0
1.34
.484
.0394
.0492
.0886
1.250
70
25.5
2
2.76
1.004
.0787
.0984
.1771
1.250
18
8.2
0.8
.709
.323
.0315
.0197
.0512
.625
34
12.3
1.25
1.34
.484
.0492
.0433
.0925
.880
70
30.5
2.5
2.76
1.201
.0984
.0945
.1929
.960
18
8.2
1.0
.709
.323
.0394
.0157
.0552
.400
34
12.3
1.5
1.34
.484
.0591
.0394
.0985
.667
70
30.5
3
2.76
1.201
.1181
.0827
.2008
.700
18
9.2
0.7
.709
.362
.0276
.0197
.0472
.715
34
14.3
1.25
1.34
.563
.0492
.0453
.0945
.920
70
35.5
3
2.76
1.396
.1181
.0827
.2008
.700
18
9.2
1.0
.709
.362
.0394
.0157
.0551
.400
34
14.3
1.5
1.34
.562
.0591
.0413
.1004
.700
70
35.5
4
2.76
1.398
.1575
.0709
.2279
.450
20
8.2
0.6
.787
.323
.0236
.0276
.0512
1.166
34
16.3
1.5
1.34
.642
.0591
.0413
.1004
.700
20
8.2
0.7
.787
.323
.0276
.0256
.0532
.929
34
16.3
2.0
1.34
.642
.0787
.0335
.1123
.425
20
8.2
0.8
.787
.323
.0315
.0236
.0551
.750
35.5
18.3
0.9
1.40
.720
.0354
.0473
.0827
1.330
24
SCHNORR®
DISC SPRINGS
®
mm Size
Inch Size
Inch Dimension
Deflect /
mm Size
Inch Size
Inch Dimension
Deflect /
O.D.
I.D.
Thick
O.D.
I.D.
Thick
Deflect
Free H
Thick
O.D.
I.D.
Thick
O.D.
I.D.
Thick
Deflect
Free H
70
40.5
4
2.76
1.595
.1575
.0630
.2204
.400
180
92
10
7.09
3.62
.394
.1575
.5515
Thick
.400
70
40.5
5
2.76
1.595
.1968
.0472
.2441
.240
200
82
8
7.87
3.23
.315
.2441
.5591
.775
71
36
2
2.80
1.42
.0787
.1024
.1811
1.300
200
82
10
7.87
3.23
.394
.2165
.6105
.550
71
36
2.5
2.80
1.42
.0984
.0787
.1771
.800
200
82
12
7.87
3.23
.472
.1811
.6531
.383
71
36
4
2.90
1.42
.1575
.0630
.2205
.400
200
92
10
7.87
3.62
.394
.2205
.6145
.560
80
31
2.5
3.15
1.22
.0984
.1102
.2086
1.120
200
92
12
7.87
3.62
.472
.1890
.6610
.400
80
31
3
3.15
1.22
.1181
.0984
.2165
.833
200
92
14
7.87
3.62
.552
.1614
.7134
.293
80
31
4
3.15
1.22
.1575
.0827
.2402
.525
200
102
8
7.87
4.02
.315
.2205
.5355
.700
80
36
3
3.15
1.42
.1181
.1063
.2244
.900
200
102
10
7.87
4.02
.394
.2205
.6145
.560
80
36
4
3.15
1.42
.1575
.0866
.2441
.550
200
102
12
7.87
4.02
.472
.1654
.6374
.350
80
41
3
3.15
1.61
.1181
.0906
.2087
.767
200
102
14
7.87
4.02
.552
.1654
.7174
.300
80
41
4
3.15
1.61
.1575
.0866
.2441
.550
200
112
12
7.87
4.41
.472
.1653
.6378
.350
80
41
5
3.15
1.61
.1968
.0669
.2637
.340
200
112
14
7.87
4.41
.552
.1378
.6890
.250
90
46
2.5
3.54
1.81
.0984
.1261
.2245
1.280
200
112
16
7.87
4.41
.630
.1102
.7401
.180
90
46
3.5
3.54
1.81
.1378
.0984
.2362
.715
225
112
8
8.86
4.41
.315
.2559
.5709
.813
90
46
5
3.54
1.81
.1968
.0787
.2755
.400
225
112
12
8.86
4.41
.472
.1968
.6688
.417
100
41
4
3.94
1.61
.1575
.1260
.2835
.800
250
102
10
9.84
4.02
.394
.3150
.7090
.800
100
41
5
3.94
1.61
.1968
.1083
.3051
.550
250
102
12
9.84
4.02
.472
.2756
.7476
.583
100
51
2.7
3.94
2.01
.1063
.1418
.2481
1.330
250
127
10
9.84
5.00
.394
.2756
.6696
.700
100
51
3.5
3.94
2.01
.1378
.1102
.2480
.800
250
127
12
9.84
5.00
.472
.2874
.7594
.608
100
51
4
3.94
2.01
.1575
.1180
.2755
.750
250
127
14
9.84
5.00
.552
.2205
.7725
.400
100
51
5
3.94
2.01
.1966
.1102
.3070
.560
250
127
16
9.84
5.00
.630
.2283
.8583
.362
100
51
6
3.94
2.01
.2362
.0866
.3228
.367
112
57
3
4.41
2.24
.1181
.1458
.2640
1.230
112
57
4
4.41
2.24
.1575
.1260
.2835
.800
112
57
6
4.41
2.24
.2362
.0984
.3346
.417
125
41
4
4.92
1.61
.1575
.1654
.3229
1.050
125
51
4
4.92
2.01
.1575
.1772
.3347
1.125
125
51
5
4.92
2.01
.1968
.1535
.3503
.780
125
51
6
4.92
2.01
.2362
.1340
.3702
.567
125
61
5
4.92
2.40
.1968
.1575
.3535
.800
125
61
6
4.92
2.40
.2362
.1417
.3779
.600
125
61
8
4.92
2.40
.3150
.1142
.4292
.362
125
64
3.5
4.92
2.52
.1378
.1772
.3149
1.280
125
64
5
4.92
2.52
.1968
.1378
.3346
.700
125
64
8
4.92
2.52
.3150
.1024
.4174
.325
125
71
6
4.92
2.80
.2362
.1299
.3661
.550
125
71
8
4.92
2.80
.3150
.0945
.4094
.300
125
71
10
4.92
2.80
.3940
.0708
.4646
.180
140
72
3.8
5.51
2.83
.1496
.1968
.3465
1.310
140
72
5
5.51
2.83
.1968
.1575
.3543
.800
140
72
8
5.51
2.83
.3150
.1260
.4410
.400
150
61
5
5.91
2.40
.1968
.2087
.4055
1.060
150
61
6
5.91
2.40
.2362
.1890
.4252
.800
150
71
6
5.91
2.80
.2362
.1890
.4252
.800
150
71
8
5.91
2.80
.3150
.1575
.4724
.500
150
81
8
5.91
3.20
.3150
.1457
.4606
.460
150
81
10
5.91
3.20
.3940
.1181
.5118
.300
160
82
6
6.30
3.23
.236
.1772
.4134
.750
160
82
10
6.30
3.23
.394
.1378
.5318
.350
180
92
6
7.09
3.62
.236
.2008
.4360
.850
Reduced Material Thicknesses on Disc
Springs with Turned Contact Surfaces
Springs with a thickness of 4 mm and over are machined all over
and are given lathe-turned contact surfaces at the inner and
outer supporting edges. The contact surfaces have a width
of about O.D./150. These contact surfaces cause an increase
in spring load which has to be compensated by reducing the
thickness T to T’. Call Customer Service for more information.
Note:
Only when stacking spring layers in parallel does a reduced
height have to be taken into consideration. The free height of the
single disc remains unaltered. Special sizes up to 600 mm outside
diameter can be manufactured if required.
25
ALLENAIR
®
CYLINDERS
• Small bore cylinders 1/2, 3/4, 1 1/8”
bore up to 14” stroke
• Pneumatic and low pressure
hydraulic 7/8 thru 4” bore up to
130” stroke
• All stainless steel cylinders in 300
series or all 316
VALVE-IN-HEAD CYLINDERS
• Single acting 1/2, 3/4, 1 1/8”, bores
• Double acting 1 1/8” thru 4” bore
• Stroke length up to 130”
• Compact self-contained units
combining cylinder and valve into
one complete module
• Faster response and flow
VALVES
• 2 and 3 way valves 1/8 or 1/4”
NPT Ports
• 4 way valves 1/8, 1/4, 3/8 & 1/2”
NPT ports
• Single or double solenoid
• AC and DC Voltages
• 9 coil housing options including
explosion proof
• Bleed pilot, single or double
pressure pilot
26
ALLENAIR
®
ROTARY INDEX TABLES
•Four models available in clockwise or counter
clockwise rotation
•4 to 100 stations
•5 operating circuits
•5 top plate sizes
•Accuracy with +/- .001”
•Repeatability at a station is in the low tenths
CYL-CHECKS®
•3000 pounds max thrust load
•Feed control available in forward,
rearward or both directions
•Feed rate infinitely variable
•Parallel or tandem mount
•Optional stop or skip check features
•For smooth, precise uniform
feed control
SPECIALS
•Allenair custom makes cylinders
and valves in 5 to 7 working days
for your specific applications.
For complete list of fluid power products for
Allenair visit our website:
www.productodiemakers.com/allenair.html
27
RING PRECISION COMPONENTS
ENERPAC
®
PRECISION COMPONENTS
• Custom Specials
• OEM Components
• Injection Mold
Components
• Punches, Dies,
Guides & Quills
ENERPAC
Enerpac is the recognized global market leader in high pressure hydraulics.
• Cylinders - Hydraulic cylinders are available in more than 1000 different configurations.
• Hydraulic Pumps - are available in more than 1000 different
configurations. Featuring Hand, Battery, Electric,
Air and Gasoline powered models
• Presses - Hydraulic Presses are available in a variety of
capacities and sizes. All components can be ordered
separately, making it easy to custom build the press
which will exactly match your application requirements.
• Pullers - Complete line of pullers, whether your
application requires mechanical, hydraulic or the
patented Posi Lock system, Enerpac can satisfy
your requirements.
• Valves - Hydraulic valves are available
in a wide variety of models and
configurations, rated for 10,000 psi
operating pressure. Available for
pump mounted operations or
remote mounting and manual
or solenoid actuation
28
TRANSFER PUNCHES & SCREWS
®
TRANSFER PUNCHES
Set no. 3-17
Set No. 33
28 precision-made punches - 4-7/8” long with
indexed stand. Sizes 3/32” to 1/2” by 1/64”. Plus
handy 17/32” size. Finest tool steel, carefully
heat treated.
Set No. 25
A ‘super’ 33-piece set, sizes 1/2” through 1” by
64ths. This larger, complete set provides a total
matched set of transfer punches that satisfies most
shop requirements. Heat treated and tempered.
Set No. 1-60
Metric size transfer punch set No. 25 is for the
machine shop tooling up for metric. Set of 25
precision punches in the most popular metric
sizes 1.0 MM through 13.0 by .5 MM
Set No. A-Z
60 piece wire gauge transfer punch set, sizes 1
through 60. This precision, matched set gives your
shop a complete set of wire gauge sizes, packed in
a handy index stand. Punches are 4-7/8” long.
Set No. 25A Metric
This 26-piece punch set features letter sizes A
through Z. All punches precision crafted of the
finest tool steel. Heat treated and tempered
for years of machine shop service. Punches are
4-7/8” long with rugged index stand.
Sizes 13 MM through 25 MM by .5 MM Heat treated
and tempered for years of service. Packaged in a
rugged index stand.
Fractional Sizes: (dia. inches) Ranges from
1/16” through 1” by 64ths and 1-1/32”
through 2” by 16ths
Letter Sizes: Ranges from A through Z
Wire Gauge Sizes: Ranges from A through Z
Metric Sizes: Ranges from 1.0 mm through
26.0 mm by 0.5 mm.
TRANSFER SCREWS & SETS
• Screws-only are sold in any quantity over 6 per size.
• Sets consist of 6 screws of one size contained in a
holder, which doubles as a wrench.
Standard Sizes:
COURSE
Standard Sizes:
FINE
METRIC
Sizes:
4-40
4-48
M-3 X 0.50
5-40
5-44
M-4 X 0.70
6-32
6-40
M-5 X 0.80
8-32
8-36
M-6 X 1.00
10-24
10-32
M-8 X 1.25
3/16-24
3/16-32
M-10 X 1.50
12-24
12-28
M-12 X 1.75
1/4-20
1/4-28
M-14 X 2.00
5/16-18
5/16-24
M-16 X 2.00
3/8-16
3/8-24
M-20 X 2.50
7/16-14
7/16-20
M-24 X 3.00
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-14
29
STANDARD SPRING PLUNGERS
®
STANDARD SPRING PLUNGERS
HOW TO CHOOSE THE MODEL TO MEET YOUR APPLICATION
1.
2.
3.
4.
5.
Select end forces needed - standard or light (Silvernose).
Select plunger travel distance required.
Select plunger type - hex or round.
Select plunger material - steel, stainless steel, phenolic or Delrin®.
Select thread size.
D
Delrin® is a trademark of DuPont Corp.
A (CLASS 2A
THREADS)
ROUND NOSE
HEAVY END FORCES
PART NO.
B
END FORCE, LBS.
A
B
C
D
USE
WRENCH
4.5
6-32
17/32”
1/16”
.044-.045
VW-48
1.6
6-32
3/8”
1/16”
.044-.045
VW-48
2.7
7.3
8-32
5/8”
3/32”
.069-.070
VW-50
2.9
11.1
10-32
3/4”
1/8”
.091-.092
VW-52
SSS-54
3.0
13.0
1/4-20
1”
3/16”
.117-.118
VW-54
SSS-54A
3.0
13.0
1/4-28
1”
3/16”
.117-.118
VW-54
S-54B
SSS-54B
2.0
9.0
1/4-20
3/4”
1/8”
.117-.118
VW-54
S-56
SSS-56
3.0
15.0
5/16-18
1”
3/16”
.133-.135
VW-56
S-58
SSS-58
5.5
14.5
3/8-16
1-1/8”
3/16”
.186-.187
VW-58
S-60
SSS-60
6.6
17.4
1/2-13
1-1/4”
1/4”
.247-.248
VW-60
S-62
SSS-62
10.5
25.5
5/8-11
1-1/2”
5/16”
.308-.310
VW-62
S-64
SSS-64
6.7
37.3
3/4-10
1-3/4”
5/16”
.373-.374
VW-64
S-66
SSS-66
16.0
68.0
1-8
2-13/32”
1/2”
.496-.498
VW-66
A
B
C
D
USE
WRENCH
STEEL BODY
STEEL NOSE
STAINLESS BODY
STAINLESS NOSE
INIT.
FINAL
S-48
SSS-48
1.5
S-48A
SSS-48A
1.0
S-50
SSS-50
S-52
SSS-52
S-54
S-54A
NYLOK
C
Spring forces are accurate,
uniform and dependable. Large
bearing surface on plunger
prevents binding, assures perfect
alignment of the plunger at any
extension. Steel bodies have
a black oxide finish and case
hardened nose.
When ordering with Nylock, add “N”
at the end of the part number for sizes
1/4-20 and larger; under 1/4-20, add
“P” at end of part number.
ROUND SILVERNOSE®
LIGHT END FORCES
PART NO.
30
END FORCE, LBS.
STEEL BODY
STEEL NOSE
STAINLESS BODY
STAINLESS NOSE
INIT.
FINAL
S-49
SSS-49
0.5
1.5
6-32
17/32”
1/16”
.044-.045
VW-48
S-51
SSS-51
0.7
2.3
8-32
5/8”
3/32”
.069-.070
VW-50
S-53
SSS-53
1.3
2.7
10-32
3/4”
1/8”
.091-.192
VW-52
S-55
SSS-55
1.0
4.0
1/4-20
1”
3/16”
.117-.118
VW-54
S-55A
SSS-55A
1.0
4.0
1/4-28
1”
3/16”
.117-.118
VW-54
S-57
SSS-57
1.5
4.5
5/16-18
1”
3/16”
.134-.135
VW-56
S-59
SSS-59
2.8
7.2
3/8-16
1-1/8”
3/16”
.186-.187
VW-58
S-61
SSS-61
2.7
9.3
1/2-13
1-1/4”
1/4”
.247-.248
VW-60
S-63
SSS-63
3.5
10.5
5/8-11
1-1/2”
5/16”
.308-.310
VW-62
S-67
SSS-67
4.0
31.0
1-8
2-13/32”
1/2”
.496-.498
VW-66
Zinc plated plunger noses identify
Silvernose spring plungers as
having light end forces. Special
springs were developed for fast,
repetitive operations…designed to
flex thousands of times. Steel bodies
have a black oxide finish and case
hardened nose.
When ordering with Nylok, add “N”
at the end of the part number for
sizes 1/4-20 and larger; under 1/420, add “P” at end of part number.
STUBBY SPRING PLUNGERS
®
STUBBY SPRING PLUNGERS
HEAVY END FORCES
PART NO.
END FORCE, LBS.
A
B
C
D
USE
WRENCH
4.75
8-32
.437
.052
.070
VW-50
1.5
4.75
8-36
.437
.052
.070
VW-50
1.75
6.25
10-32
.468
.065
.093
VW-52
SSM-54
3.0
10.5
1/4-20
.531
.078
.119
VW-54
NM-56
SSM-56
3.75
15.5
5/16-18
.562
.084
.135
VW-56
NM-58
SSM-58
4.5
18.5
3/8-16
.625
.110
.186
VW-58
M-60
NM-60
SSM-60
5.0
28.0
1/2-13
.750
.151
.248
VW-60
M-62
NM-62
SSM-62
7.0
50.0
5/8-11
1.062
.215
.310
VW-62
STEEL BODY
STEEL NOSE
STAINLESS BODY
DELRIN NOSE
STAINLESS BODY
STANLESS STEEL NOSE
INIT.
FINAL
M-50A
NM-50A
SSM-50A
1.5
M-50
NM-50
SSM-50
M-52
NM-52
SSM-52
M-54
NM-54
M-56
M-58
When ordering with Nylok, add “N” at the end of the part number for sizes 1/4-20 and larger;
under 1/4-20, add “P” at the end of the part number.
LIGHT END FORCES
PART NO.
END FORCE, LBS.
A
B
C
D
USE
WRENCH
1.5
8-32
.437
.052
.070
VW-50
0.5
1.5
8-36
.437
.052
.070
VW-50
0.75
2.5
10-32
.468
.065
.093
VW-52
SSM-55
1.0
3.5
1/4-20
.531
.078
.119
VW-54
SSM-57
1.25
4.0
5/16-18
.562
.084
.135
VW-56
NM-59
SSM-59
1.5
5.0
3/8-16
.625
.110
.186
VW-58
M-61
NM-61
SSM-61
1.75
5.5
1/2-13
.750
.151
.248
VW-60
M-63
NM-63
SSM-63
2.0
8.5
5/8-11
1.062
.215
.310
VW-62
STEEL BODY
STEEL NOSE
STAINLESS BODY
DELRIN NOSE
STAINLESS BODY
STANLESS STEEL NOSE
INIT.
FINAL
M-51A
NM-51A
SSM-51A
0.5
M-51
NM-51
SSM-51
M-53
NM-53
SSM-53
M-55
NM-55
M-57
NM-57
M-59
When ordering with Nylok, add “N” at the end of the part number for sizes 1/4-20 and larger;
under 1/4-20, add “P” at the end of the part number.
B
C
A (CLASS 2A THREADS)
NYLOK
HOLD IT!
WITH VLIER SPRING
LOADED DEVICES
D
Stubby” spring plungers
offer the advantages of a ball
plunger’s short body with the
long nose of a spring plunger.
These compact units provide
considerable plunger travel and
high end forces in applications
where space is restricted - their
bodies are only half the length
of spring plunger, yet plunger
travel is twice that of a ball
plunger.
Case hardened nose - Offers
excellent wear resistance;
however, core is ductile to
reduce possibility of fracturing
under impact. Steel version
only.
Available with steel, stainless
steel or Delrin noses. Steel
bodies have a black oxide finish.
Nose telescopes completely Permits use where mating
surfaces must be flush.
Quickly installs from either end Only tool required is a wrench.
Complete Viler product line
available - Call for your free
catalog
For positive holding action, spring plungers offer many
advantages. Quickly, easily installed or removed. Apply accurately
controlled end pressures. 418 types and sizes including round
nose, hex nose for easy removal, stubby for tight places, hand
retractable and ball type for use where side loads are a problem.
Can be modified to fit your special needs. Steel or stainless. Other
materials on special order.
31
VIBRASYSTEMS INC.
®
VIBRASYSTEMS INC.
TYPE: VSCM, CMSS, CRS, CSS Cup Mount
• Ideally suited for presses, pumps, blowers, crushers or injection
molding machines
• Designed for where shear loads are up to 40% of the maximum load.
• Available in stainless steel.
TYPE: SML, VTM Compression Shear Mounts
• Designed for heavy machinery such as presses, rolling mills, injection molding machines
• Provide good stability with shear loads of up to 40% of the maximum load while vertical deflection is low.
TYPE: NVS Compress Shear Mounts
• Recommended for applications with both compression and shear loads.
• Can be used for the installation of almost all factory production equipment.
• Leveling adjustment – 1/2” (12mm).
TYPE VM, VMT Compression Shear Leveling Mounts
• Designed for installation where shear loads are not more than 10% of the maximum load.
• Self-aligning capabilities compensate for uneven floors.
TYPE: VMH Leveling Wedge Mounts
• Designed for precision leveling of heavy industrial equipment
• Special opening allows bolting machines to the floor when leveling is done.
CYLINDRICAL MOUNTS – BOBBINS
• Designed for wide range of applications with light loads where simple and compact anti-vibration mounting are required, such as: fans, motors, scales, electrical panels, compressors, air conditioners, computer equipment, etc.
TYPE: VP, ECRMP, RP, CRMP, SRMP, VB Neoprene Pads
• Standard pads are 18” x 18” overall dimensions
• Thickness available from 1/4” and up to 1”
• Different hardness for different load capacities
INDUSTRIAL RUBBER PRODUCTS IN ROLLS
• Red silicone, Neoprene, Pure Gum (natural rubber), EPDM, Hypalon, Viton, Butyl, Nitrile, SBR, Rubber Matting, etc.
• Available in thickness for up to 2” (50mm)
32
URETHANE PRODUCTS
®
URETHANE SHEETS
• Tolerances for width & length for all sheets:
+1/8” to + 1” depending on the sheet size.
Standard sizes are:
Hardnesses:
Colors:
12"W x 12" L, 12"x 24" L
24" x 24" L, 12" x 48" L
24" x 48" L
20A, 30A, 40A
60A, 70A, 80A
90A, 95A, 75D
Amber, Black,
(Other Colors
Available)
RODS (Round Sections)
Used as strippers, pressure cylinders in bulging applications as
tube bending mandrels & for machining variety of parts
Standard Lengths are:
Diameters (in):
Hardnesses:
Colors:
6",12”, 24", 36", 48"
¼, ⁄8, ½, ⁄8, ¾, ⁄8, 1,
1 1⁄8, 1 ¼, 1 3⁄8, 1 ½, 1 5⁄8, 1 ¾,
2, 2 ¼, 2 ½, 3, 3 ½, 4, 5
20A, 30A, 40A,
60A, 70A, 80A,
90A, 95A, 75D,
Amber, Black,
(Other Colors
Available)
3
5
7
BARS (Square & Rectangular Sections)
Molded to shape. Used as Die-Pads in bending applications, as pressure Pads in
stamping applications, and as bumper strips.
Standard Lengths are:
Width x Height (in):
Hardness:
Colors:
12", 24”,36", 48"
½ x ½, ¾ x ¾, 1 x 1, 1 ¼ x 1 ¼, 1 ½ x 1 ½,
2 x 2, 2 x 3, 3 x 3, 4 x 4, 4 x 5
20A, 30A, 40A, 60A, 70A, 80A,
90A, 95A, 75D
Amber, Black,
(Other Colors Available)
TUBES (Hollow Sections)
We have a huge inventory of tube molds that are interchangeable for standard fractional sizes of I.D.s & O.D.s
• Tolerance: I.D : + 0.010” , - 0.060” ; O.D : + 0.060” , - 0.010
O.D.(inch)
ID (inch)
O.D.(inch)
ID (inch)
1¾
1
3¾
2¾
2
½ , 1, 1 ¼, 1 ½
4
2, 2 ¼, 2 ½
2½
½, 1, 1 ¼, 1 ½
4½
2 ½, 3
2¾
1 ¼, 1 ½, 1 ¾, 2, 2 ½
5
3
3
1, 1 ½, 2, 2 ¼
5½
4
3¼
1 ¾, 2 ¼
6
5
3½
1 ¼, 2, 2 ½, 2 ¾
Standard
Lengths are:
Hardness:
Colors:
12”, 24”, 36”
20A, 30A, 40A,
60A, 75A, 80A,
90A, 95A, 75D
Amber, Black,
(Other Colors Available)
Producto Urethane Strippers and Urethane
Closed End Strippers are also available.
POLY-HAMMERS (Hollow Sections)
• Molded Polyurethane head is shot-filled, with screw-in faces.
• When the hammer faces are worn out, just unscrew the face and screw-in a new face.
• Hammer handles are steel reinforced, molded integral with the head, with a protruding texture on the handle for a better grip.
• Standard hammers are ORANGE color. Hammer faces are available in 6 color-coded hardness of Urethane as mentioned below:
* Hammer faces Available Hardness: 60A - Clear (Soft), 70A – Blue, 80A – Green, 90A – Red, 95A – Amber, and 75D - Black ( Hard).
Model Number:
PH-12
PH-20
PH-24
PH-48
PH-60
Face Model
F12-*
F20-*
F24-*
F48-*
F60-*
PH-88
F88-*
Head Length (with faces)
3.3”
3.8
4.0”
5.0
6.0”
7.7”
Face Dia.
1.4”
1.8”
1.9”
2.5”
2.9”
2.9”
OAL Hammer length
10”
11”
11.75”
12.75”
14.75”
19.25”
Approx. Weight
0.75 lbs
1.5 lbs
2 lbs
3 lbs
4.5 lbs
7 lbs
33
DAC
WEICON
®
DAC
DAC Industries mold release products, cleaners, degreasers, lubricants and rust inhibitors are designed to
extend machine and tool life, improve mold release properties, and increase efficiency.
Product No.
Product
Quantity
Product No.
Product
Quantity
DAC-101
Moisture Guard
12 cans/Case
DAC-354
Total Mold Cleaner & Degreaser
12 cans/Case
DAC-102
On Line Resin Remover
12 cans/Case
DAC-405
Contact & Circuit Board Cleaner
12 cans/Case
DAC-103
Universal All Purpose Degreaser
12 cans/Case
DAC-15151
All Purpose Mold Release
12 cans/Case
DAC-104
All Purpose Foam
12 cans/Case
DAC-30612
Heavy Duty Paintable Mold Release
12 cans/Case
DAC-105
Dry Film With Coverage Indicator
12 cans/Case
DAC-36361
Paintable Mold Release
12 cans/Case
DAC-107
703 All Purpose Spray
12 cans/Case
DAC-40512
Heavy Duty Silicone Mold Release
12 cans/Case
DAC-107-A
Trigger Sprayer
EACH
DAC-45451
All Temperature Silicone Mold Release
12 cans/Case
DAC-108
Does It All
12 cans/Case
DAC-55512
Lecithin Drilling & Tapping Fluid
12 cans/Case
DAC-110
Micro Plate
12 cans/Case
DAC-75751
Penetrating Oil
12 cans/Case
DAC-111
Extreme Resin Remover
12 cans/Case
DAC-85851
Biodegradable Paintable Mold Release
12 cans/Case
DAC-112
Armor Plate
12 cans/Case
DAC-113
Super Lube
12 cans/Case
DAC-115
Rhino Plate
12 cans/Case
DAC-119
Hopper & Grinder with Acid Static
12 cans/Case
DAC-200
Die Lube
12 cans/Case
DAC-205
Excel
12 cans/Case
DAC-206
Wear Guard
12 cans/Case
DAC-208
On Cycle Heavy Duty Resin Remover
12 cans/Case
DAC-220
DAC's Easy Spray Grease
12 cans/Case
DAC-300
Ultra Fine Dry Mold Shield
12 cans/Case
DAC-353
Universal All Purpose Degreaser II
12 cans/Case
WEICON
Solutions for production, repair, maintenance & servicing.
The uncomplicated solution for all repair and maintenance work.
• Easy to use: Cut off - knead – use
• Always the right portion, even for small repairs
• Bonds to metal, hard-plastics*, fibre-reinforced
materials, wood, glass, ceramic and stone
• Nine different Repair Sticks to choose from for various
applications.
• All Around Lubricants
• Two Component Adhesives
• One Component Adhesives
• Elastic Adhesives
Complete WEICON
line available.
Cleaning and degreasing
Surface and corrosion
protection
Dissolving and separating
Brake Cleaner
Aluminum Sprays
Alu Grinding Protection
Burner Cleaner
Brass Spray
Chewing Gum Remover
Cleaner Spray S
Chrome Silver Spray
Label Remover
Compressed-Air Spray
Copper Spray
Mould Release Agent
Electro Contact Cleaner
Corro-Protection
Rust Loosened & Contact Spray
Mould Cleaner
Rust Protection 2000 Plus
Rust-Shock
Multi Foam
Stainless Steel Spray
Welding Protection Spray
Plastic Cleaner
Zinc Sprays
Multi Foam
Zinc Alu Spray
Lubrication
Care and protection
Inspection aids and agents
Lubricating and
multifunctional oils
Cockpit Spray
Plastic Cleaner
Sealant & Adhesive
Remover
34
WEICON Repair Sticks
Starter Spray
Surface Cleaner
Adhesive Spray
TFT/LCD Screen-Cleaner
Freeze Spray
Visor Cleaner
Leak Detection Spray
Adhesive lubricants
Assembly sprays
Contact Spray
Hand Protective Foam
Metal-Fluid
Stainless Steel Care Spray
PRODUCTO DIEMAKERS
LOCATIONS, DIVISIONS, AFFLIATES & PARTNERS
®
PRODUCTO DIEMAKERS SUPPLIES LOCATIONS
Ontario
Producto Diemakers
Quebec
Producto Diemakers
641 Chrislea Rd, Unit #4
Vaughan, ON L4L 8A3
4486 Boulevard de la Grande Allee
Boisbriand, QC J7H 1R9
Phone: 905-856-9990
Toll Free: 866-562-0555
Fax: 905-856-9887
Phone: 450-430-5082
Toll Free: 866-508-5082
Fax: 450-430-1022
DIVISIONS:
AFFILIATES:
Grinding Systems &
Machinery Systems
Springs, Accessories & Die Sets
5835 Harper Rd
Solon, OH 44139
Phone:
440-542-0000
Toll Free: 800-237-1440
Fax:
440-542-0250
www.dieco.us
Serving the U.S.
Precision Components
2980 Turner Rd
Jamestown, NY 14701
Phone: 716-484-7131
Toll Free: 800-828-2216
Fax:
716-484-2235
www.ringprecision.com
800 Union Ave
Bridgeport, CT 06607
Phone: 203-366-3224
203-367-0418
Fax:
www.mooretool.com
Nanotechnology
Systems, LLC
230 Old Homestead Hwy
Swanzey, NH 03446
Phone: 603-352-3030
Fax: 603-352-3363
www.nanotechsys.com
is a proud distributor of these quality products:
Ajax • Allenair • All American • Asco
Associated Spring Raymond • Barry Controls • DAC
Enerpac • Kaller • Knu-Vise (Lapeer) • Lee Springs
Ortman • Polyurethane Products • Royal • Schmalz
Schnorr • Stilson • VibraSystems • Vlier • Weicon
35
PRODUCT LINE
®
Die Springs
Vlier
In addition to our standard
Die Springs, we offer separate
lines manufactured to ISO &
JIS specifications. Full line of
Stainless Steel Mechanical
Spring Struts.
Spring Loaded Stubby Ball And
Push-Fit Plungers, Ball Buttons,
Torque Thumb Screws & Handles,
Retractable Plungers, Tooling
Flanges, Spring Stops, Toggle Pads.
ISO D-Line Die Springs, meet ISO 10243 specifications.
NEW!
CUSTOM/SPECIAL Springs available per your specifications.
Allenair
Kaller
Air and Light Hydraulic
Cylinders to 4” bore,
Valve-In-Head, 100%
Stainless Steel Cylinders,
Air Clamps, 2, 3, &
4- Way Valves,
Cyl-Checks, Rotary
Index Tables, Custom and Specials.
Gas Springs, Flex Cam,
Controllable Gas Springs,
Roller Cam, Flange
Stripper, Pierce-Nut
Stamping Equipment.
Urethane
Schnorr
•Available in sheets, rods,
bars and tubes.
•Poly-Hammers available
in 6 sizes.
Precision Disc Springs,
Safety Washers, 6mm 250mm OD. High alloyed
steels. Slotted and nonslotted K-springs for
preloading ball bearings.
Sizes from 1/4” to 10” O.D.
DAC
Enerpac
Degreasers, Resin
Remover, Rust Inhibitors,
Lubricants, Greases,
Specialty Lubricant,
Drilling & Tapping, Mold
Releases, Heavy Duty
Mold Releases and
Plating Agents.
Cylinders, Hydraulic
Pumps, Hydraulic
Presses, Pullers and
Hydraulic Valves.
Weicon
Transfer Screws & Sets
•
•
•
•
•
Screws are available in sets
of six per size. Consist of
six screws contained in a
holder which doubles as a
wrench. Can be purchased
individually. Metric Transfer
Punch Size also available.
All Around Lubricants
Two Component Adhesives
One Component Adhesives
Elastic Adhesives
Technical Sprays
ONTARIO •
TEL: (905) 856-9990 FAX: (905) 856-9887 641 Chrislea Road, Unit #4, Vaughan, ON L4L 8A3
QUEBEC
TEL: (450) 430-5082 FAX: (450) 430-1022 TOLL FREE: 1-866-508-5082
4486 Boulevard de la Grande Allee, Boisbriand, QC J7H 1R9
•
TOLL FREE: 1-866-562-0555

PRODUCTO DIEMAKERS SUPPLIES LIMITED

Transcription

Similar documents

Volume 1 - Mary Jewellery

Machines - Lamello

Catalog of Products