140/141/143/144/145 Series Drive Axle Parts - Canada

Transcription

HOW TO USE THIS CATALOG
There are 51 basic carriers covered in this catalog:
3200-R-1500
3200-T-1814
3200-N-1860
3200-M-1547
3200-U-1815
3200-S-1865
3200-X-1558
3200-V-1816
3200-Z-1872
3200-L-1624
3200-W-1817
3200-A-1873
3200-G-1645
3200-C-1849
3200-B-1874
3200-X-1662
3200-D-1850
3200-C-1875
3200-L-1676
3200-E-1851
3200-D-1876
3200-M-1677
3200-F-1852
3200-E-1877
3200-Q-1785
3200-G-1853
3200-G-1879
3200-M-1885
3200-P-1888
3200-R-1890
3200-D-1902
3200-E-1903
3200-F-1904
3200-G-1905
3200-H-1906
3200-M-1911
3200-P-1914
3200-R-1916
3200-S-1917
3200-T-1918
3200-Z-1924
3200-B-1978
3200-C-1979
3200-D-1980
3200-E-1981
3200-F-1982
3200-H-1984
3200-J-1986
3200-K-1987
3200-L-1988
3200-W-2051
Major assembly differences such as oil pumps, main diff. locks, etc. are indicated by the different
assembly level numbers as well as the base carrier part number. The Axle Models-CarriersFeatures Chart on Page 2 lists all the variations of the carriers covered in this book.
Note: The carriers listed in this catalog do not include yokes. A yoke is a major assembly
difference, so a carrier sold with a yoke has a different assembly level number than the same
carrier without the yoke.
The charts for carriers, output shafts, and axle housings include the following information:
y An exploded view of each assembly, keyed to the parts list.
y A description of each part.
y Parts that are sold as assemblies that include other parts.
y Which carriers or axle models the part is used on.
y The quantity of the part used on the carrier or axle.
y The part number of each part.
y Whether the part is available in a kit.
Carrier Parts: Determine which Chart and Figure (1 or 2) applies to your carrier by using the
following sources of information:
y Identification tag installed on the carrier.
y Axle Models-Carrier-Features Chart.
y Pictures and descriptions of the carriers inside the front cover and at the beginning of Chart 1
and Chart 2.
Output (Thru) Shafts: This chart covers the output shafts for the forward axles of all tandems.
Note that the output shaft assembly or its components are only sold as separate items. The output
shaft is not included with the purchase of a carrier or housing.
Housing Assemblies and Wheel End Parts: This chart covers the housing assemblies and
wheel end parts for all axles. The parts are listed according to axle models and the two wheel end
series (L Series or R Series) that are used on 140, 141, 143, 144 and 145 series axles.
Axle Shafts: The axle shafts are grouped in sets (L.H. and R.H.) according to the axle models they
are used on. Many axle shaft sets are used on more than one axle model. The axle shafts are also
listed by part number with dimensions.
Yokes and Flanges: There are five charts that cover full round bearing yokes, wing bearing
yokes, Easy Service yokes, RPL yokes and flanges. Each chart lists the yokes or flanges used on
each axle model. The yokes and flanges are listed by dimension.
Kits: The first chart lists all the kits available for each axle model and carrier. Following that chart,
the kits are listed in numerical order, and the contents of each kit is listed.
Numerical Parts Index: This lists every part number in the catalog along with the page(s) on which
the part is listed.
STANDARD CARRIER SUPERCESSION LIST
ORIGINAL
PART NUMBER
A1-3200-X-1558
A18-3200-L-1624
A35-3200-L-1624
A4-3200-G-1645
A6-3200-G-1645
A9-3200-G-1645
A11-3200-G-1645
A13-3200-G-1645
A21-3200-G-1645
A27-3200-G-1645
A1-3200-X-1662
A4-3200-X-1662
A6-3200-X-1662
A7-3200-L-1676
A8-3200-L-1676
A9-3200-L-1676
A13-3200-L-1676
A14-3200-L-1676
A15-3200-L-1676
A1-3200-M-1677
A8-3200-Q-1785
A9-3200-Q-1785
A14-3200-Q-1785
A15-3200-Q-1785
A40-3200-Q-1785
A42-3200-Q-1785
A1-3200-T-1814
A6-3200-T-1814
A8-3200-T-1814
REPLACEMENT
PART NUMBER
B1-3200-G-1879
A1-3200-K-1987
B1-3200-D-1902
A1-3200-B-1978
A6-3200-B-1978
B1-3200-G-1645
A4-3200-B-1978
A8-3200-B-1978
B4-3200-G-1645
B1-3200-G-1645
A1-3200-H-1984
B1-3200-X-1662
A4-3200-H-1984
B2-3200-L-1676
B4-3200-L-1676
B7-3200-L-1676
B11-3200-L-1676
B8-3200-L-1676
B9-3200-L-1676
A1-3200-E-1981
B4-3200-S-1865
B7-3200-S-1865
B8-3200-S-1865
B9-3200-S-1865
B7-3200-S-1865
B4-3200-S-1865
A1-3200-B-1978
A6-3200-B-1978
A8-3200-B-1978
ORIGINAL
PART NUMBER
A10-3200-T-1814
A12-3200-T-1814
B1-3200-T-1814
B4-3200-T-1814
B6-3200-T-1814
B8-3200-T-1814
A1-3200-U-1815
A1-3200-V-1816
A4-3200-V-1816
B1-3200-V-1816
B4-3200-V-1816
B6-3200-V-1816
B8-3200-V-1816
A1-3200-W-1817
B1-3200-N-1860
A8-3200-S-1865
A9-3200-S-1865
A40-3200-S-1865
B1-3200-B-1874
A1-3200-C-1875
B1-3200-D-1876
A1-3200-E-1877
B1-3200-P-1888
B1-3200-R-1890
B1-3200-G-1905
B1-3200-H-1906
A1-3200-M-1911
A1-3200-P-1914
REPLACEMENT
PART NUMBER
A6-3200-B-1978
A1-3200-B-1978
A1-3200-B-1978
A4-3200-B-1978
A6-3200-B-1978
A8-3200-B-1978
A1-3200-E-1981
A1-3200-H-1984
A4-3200-H-1984
A1-3200-H-1984
A4-3200-H-1984
A6-3200-H-1984
A8-3200-H-1984
A1-3200-K-1987
A1-3200-C-1979
B4-3200-S-1865
B7-3200-S-1865
B7-3200-S-1865
A1-3200-D-1980
A1-3200-F-1982
A1-3200-J-1986
A1-3200-L-1988
A1-3200-K-1987
A1-3200-E-1981
A1-3200-F-1982
A1-3200-L-1988
B1-3200-T-1918
B1-3200-P-1914
The part number supercessions listed here reflect product improvements made in several key areas.
Several of these product improvements are non-interchangeable at the component level. In these cases,
kits have been developed to ease your transition to the new designs.
Rear Drive Axles
Model Numbers and Designations - OLD STYLE
Nominal Axle Load Rating (GAWR):
In thousands of pounds. Individual forward
and rear axles of a tandem set (D, N, P, R)
are rated as single axles. A tandem set (T) is
rated as the combination of the two axles and
a tridem set (Z) as the combination of the
three axles.
Gearing Type
1 - Single Speed
2 - Two Speed
3 - Helical Double Reduction
4 - Salisbury Single Speed
5 - Planetary Double Reduction
6 - Hub Reduction
RR 20 1 4 5
Manufacturing Location
A - Australia
B - Brazil (Braseixos)
C - India
D - Mexico (Dirona)
E - Europe (C.V.C.)
M - Europe (Maudsley)
N - U.S.A.
Main Differential Nest Type
B - Special Differential
C - Driver Controlled Differential Lock
F - Standard Differential
H - High Traction® Differential
N - NoSPIN® Differential
N C Q F 123
Hub Type (See Note 3)
A - Aluminum
F - Ferrous
N - None
Axle Type
C - Single Rear Drive Axle, Coach
D - Forward-Rear Axle of a Drive Tandem
with Inter-Axle Differential
N - Forward-Rear Axle of a Drive Tandem or
Tridem without Inter-Axle Differential
P - Forward-Rear Axle of a Drive Tandem
with Inter-Axle Differential and Pump
R - Rear-Rear Axle of a Drive Tandem
S - Single Rear Drive Axle
T - Tandem Drive Axle Set
Z - Tridem Drive Axle Set
Brake Type
C - Dura-Master® Air Disc Brake
D - RDA Stopmaster® Wedge Brake
(Dual Air Chambers)
E - RDH Stopmaster® Wedge Brake
(Dual Hydraulic Cylinders)
F - RSH Stopmaster® Wedge Brake
(Single Hydraulic Cylinder)
L - QPlus® Cam Brake
N - None
P - Cam-Master® "P" Series Cam Brake
Q - Cam-Master® "Q" Series Cam Brake
S - RSA Stopmaster® Wedge Brake
(Single Air Chamber)
T - Cam-Master® "T" Series Cam Brake
W - Cam-Master® "W" Series Cam Brake
Axle Specification Number
Identifies specific customer axle
configurations (variations from the original
axle design). For information about the
variation, see the Bill of Material for that
specific axle model.
Carrier Type
Carrier size. Larger numbers
indicate a higher GCW rated
carrier: i.e., larger ring gear, etc.
(Also see Tridem Axle Note 2
below.)
NOTE 1:
If a complete axle designation is not required, use the first seven positions
of the model designation to identify the basic axle model.
EXAMPLES OF BASIC AXLE MODELS:
RS 17 140 - Single Rear Drive, 17,000 lb., Single Speed, 15" Ring Gear,
140 Carrier Model.
RT 48 380 - Tandem Drive Axle Set, 48,000 lb., Helical Double Reduction,
19.62" Ring Gear, 380 Carrier Model.
RZ 60 164 - Tridem Drive Axle Set, 60,000 lb., Single Speed, Includes a
150 Series Forward Rear or First Axle and a 145 Series
Tandem Axle Set as the Second and Third Axles.
Axle Design Variation
Indicates axle design level or
variation, (e.g., RS 23 161 has a
thicker wall housing than the RS
23 160). For information see the
Bill of Material for that specific
axle model. (Also see Tridem
Axle Note 2 below.)
NOTE 2, FOR TRIDEM AXLES ONLY:
For a Tridem Drive Axle Set (RZ), the
number in the sixth position designates
the carrier in the first axle. The number
in the seventh position designates the
carriers in the second and third axles.
NOTE 3:
Some axle designations or
specifications do not have a hub
type code.
Rear Drive Axles
Model Numbers and Designations - NEW STYLE
RELATIVE GEARING
SIZE OR SERIES
AXLE MODEL TYPE
S = Single Rear (Solo)
X = Front Drive Steer
D = Fwd Rear w/IAD
N = Fwd Rear less IAD
0 = No Gearing
1 = 292/347
2 = 337/387
3 = TBD
4 = 381/432
5 = 415/432
6 = 432/457
BRAKE TYPE
B = "B" Frame Brake
C = Air Disc Brake
D = Wedge Brake (Dual Air Chambers)
E = Wedge Brake (Dual Hydraulic Cylinders)
F = Wedge Brake (Single Hydraulic Cylinder)
G = DuraPark Hydraulic Drum
7 = 457
8 = 460/498
H = Quadraulic Disc
K = Disc Plus Air Disc
L = Q Plus™ Cam Brake
N = None
P = "P" Series Cam Brake
P = Fwd Rear w/Pump
R = Rear Rear
T = Tandem Drive
Z = Tridem Drive
C = Coach
H = High Entry
MFG. LOCATION
N = North America
S = South America
E = Europe
A = Australia/Asia/Africa
Q = "Q" Series Cam Brake
R = Cast Plus™ Brake
S = Wedge Brake (Single Air Chamber)
T = "T" Series Cam Brake
W = "W" Series Cam Brake
M x - xx - 1 4 x x N - x - N 123 - xxxx - xxxx
M = Meritor
Ratio 1
CARRIER
VARIATION
Ratio 2
SPEC. NO.
AXLE TYPE
0 = No Carrier
1 = Single Speed
2 = Two Speed
3 = Helical Dbl Red
4 = Salisbury
A = Aluminum
D = Ductile
M = Ductile
Rear
(Amboid)
N = No Carrier
Includes: TRACK,
PARKING BRAKE,
OTHER
5 = Planetary Dbl Red
6 = Hub Reduction
7 = Portal
9 = Single Speed with
Torque Output
Limited Engine
R = Ductile
Front Drive
Axle Carrier
(Right Hand)
T = Ductile
Telma
WHEEL END/BRAKE ATTACHMENT/DIFFERENTIAL
A = Conventional Spindle/Conventional Brake/Standard Diff
B = Conventional Spindle/Conventional Brake/DCDL
C = Conventional Spindle/Conventional Brake/No-Spin
D = Conventional Spindle/Conventional Brake/Other Diff
E = Unitized Spindle/Conventional Brake/Standard Diff
F = Unitized Spindle/Conventional Brake/DCDL
GAWR
xx = GAWR (000) Pounds or Tonnes
(dependent on mfg. location)
HSG WALL
0 = Cast
1 = TBD
2 = 8 mm
3 = 9.5/10.0 mm
4 = 11 mm
5 = 12.7/13.0 mm
6 = 14.3 mm
7 = TBD
8 = 16 mm
9 = TBD
G = Unitized Spindle/Conventional Brake/No-Spin
H = Unitized Spindle/Conventional Brake/Other Diff
J = Conventional Spindle/Integral Brake/Standard Diff
K = Conventional Spindle/Integral Brake/DCDL
L = Conventional Spindle/Integral Brake/No-Spin
M = Conventional Spindle/Integral Brake/Other Diff
N = Unitized Spindle/Integral Brake/Standard Diff
P = Unitized Spindle/Integral Brake/DCDL
Q = Unitized Spindle/Integral Brake/No-Spin
R = Unitized Spindle/Integral Brake/Other Diff
S = Bolt-On Conventional Spindle/Conventional Brake/No Diff
TABLE OF CONTENTS
Page
Carriers & Features of Current Axle Models……………………… 2
Forward Carriers of Tandem Axles……………………………………
3
Carriers for Single Axles and Rears of Tandem Axles……………10
Output (Thru) Shafts……………………………………………………20
Housing Assemblies and Wheel End Parts…………………………21
Axle Shafts……………………………………………………………… 22
Yokes and Flanges
Full Round Bearing Yokes…………………………………………27
Wing Bearing Yokes…………………………………………………28
Easy Service Yokes…………………………………………………29
RPL Yokes……………………………………………………...……30
Companion Flanges…………………………………………………31
Axle Model to Carrier to Kit Cross Reference………………………32
Service Kits………………………………………………………………38
Numerical Parts Index………………………………………………… 53
Warranty……………………………………………………………………
60
1
CURRENT AXLE MODELS - CARRIERS - FEATURES
AXLE MODELS
RS-16-140
RS-17-140
(SINGLE A XLE)
RS-16-141 (SINGLE A XLE)
RS-17-141 (SINGLE A XLE)
RS-17-145
RS-19-145
(SINGLE A XLE)
CARRIERS
MAIN DIFF.
LOCK
NO SPIN ®
DIFF.
A 23-3200-M -1547
B 2-3200-L-1676
B 11-3200-L-1676
B 7-3200-S-1865
B 7-3200-S-1865
B 7-3200-L-1676
B 7-3200-S-1865
B 9-3200-L-1676
B 9-3200-S-1865
RS-17-144
B 4-3200-L-1676
RS-19-144
B 4-3200-S-1865
RS-21-145
B 1-3200-G-1879
(SINGLE A XLE)
B 8-3200-L-1676
B 8-3200-S-1865
RT-34-145 Fwd RD-17-145
B 4-3200-G-1645
A 6-3200-B -1978
A 8-3200-B -1978
B 6-3200-F-1852
RP -17-145
A 6-3200-H-1984
A 8-3200-H-1984
Rear RR-17-145
B 7-3200-L-1676
B 7-3200-S-1865
B 9-3200-L-1676
B 9-3200-S-1865
B 4-3200-E-1851
RT-40-140 Fwd RD-20-140
A 1-3200-B -1978
B 1-3200-G-1645
Rear RR-20-140
B 4-3200-S-1865
M T-40-143 Fwd M D-20-143
A 1-3200-B -1978
A 1-3200-E-1981
A 1-3200-C-1979 *
M P -20-143
A 1-3200-H-1984
Rear M R-20-143M A -3200-W-2051
M R-20-143
B 4-3200-L-1676
B 4-3200-S-1865
B 1-3200-M -1885 *
RT-34-144 Fwd RD-17-144
A 1-3200-B -1978
RT-38-144
RD-19-144
B 1-3200-G-1645
RT-40-145
RD-20-145
A 1-3200-E-1981
A 4-3200-B -1978
B 1-3200-E-1903
A 1-3200-C-1979 *
B 1-3200-S-1917 *
B 1-3200-F-1852
RP -17-144
A 1-3200-K-1987
RP -19-144
B 1-3200-D-1902
RP -20-145
A 1-3200-H-1984
B 1-3200-X-1662
A 4-3200-H-1984
B 1-3200-G-1853
Rear RR-17-144
B 4-3200-L-1676
RR-19-144
B 4-3200-S-1865
RR-20-145
B 1-3200-G-1879
B 8-3200-L-1676
B 8-3200-S-1865
B 1-3200-M -1885 *
B 1-3200-R-1916 *
B 1-3200-D-1850
B 1-3200-E-1851
RT-44-145 Fwd RD-22-145
A 1-3200-D-1980
A 1-3200-F-1982
RP -22-145
A 1-3200-J-1986
A 1-3200-L-1988
B 1-3200-T-1918
B 1-3200-P -1914
Rear RR-22-145
B 1-3200-A -1873
B 6-3200-A -1873
B 1-3200-F-1904
B 1-3200-Z-1924
* Indic a t e s a lum inum c a rrie r ho us ing. ( N o t a v a ila ble in 2 .6 4 ra t io .)
2
OIL
PUMP A.B.S.
AXLE
SPLINE
RATIOS
AVAIL.
1.85" - 36
2.00" - 39
3.42 thru 7.17
2.10" - 41
2.00" - 39
2.79 thru 3.21
3.42 thru 7.17
2.79 thru 3.21
3.42 thru 7.17
2.64 thru 3.21
3.42 thru 7.17
2.64 thru 7.17
2.64 thru 3.21
3.42 thru 7.17
2.79 thru 7.17
STD. IAD SHIFT
(UNLESS NOTED)
REVERSE
2.79 thru 3.21
3.42 thru 7.17
2.79 thru 3.21
3.42 thru 7.17
2.10" - 41
2.64 thru 7.17
REVERSE
2.64 thru 4.11
2.64 thru 3.21
3.42 thru 7.17
2.79 thru 7.17
2.64 thru 7.17
REVERSE
REVERSE
REVERSE
REVERSE
2.64 thru 3.21
3.42 thru 7.17
2.64 thru 7.17
2.64 thru 3.21
3.42 thru 7.17
2.79 thru 7.17
2.64 thru 3.21
3.42 thru 7.17
3.42 thru 5.86
REVERSE
REVERSE
CHART 1
FORWARD CARRIERS OF TANDEM AXLES
(Use with Figure 1, Inside Front Cover)
VISUAL IDENTIFICATION OF FORWARD CARRIERS
IAD SHIFTER:
BOLT ON FOR 1624, 1902, 1911, 1918
SCREW-IN FOR 1817, 1877, 1888,
1906, 1987 AND 1988 CARRIERS
OIL FILTER
IAD SHIFTER:
BOLT ON FOR 1677 AND 1903
SCREW-IN FOR 1815, 1875, 1890,
1905, 1981 AND 1982 CARRIERS
NO OIL FILTER
DIFF. LOCK:
BOLT-ON FOR 1624 AND 1817 CARRIERS
SCREW-IN FOR 1877, 1888, 1902, 1906,
1911, 1918, 1987 AND 1988 CARRIERS
FORWARD CARRIERS WITH IAD, DIFF. LOCK
AND OIL PUMP: 3200-L-1624, 3200-W-1817,
3200-E-1877, 3200-P-1888, 3200-D-1902,
3200-H-1906, 3200-M-1911, 3200-T-1918,
3200-K-1987, 3200-L-1988
IAD SHIFTER:
BOLT-ON FOR 1662 AND 1914
SCREW-IN FOR 1816, 1853, 1876,
1894 AND 1986 CARRIERS
OIL FILTER
DIFF. LOCK:
BOLT-ON FOR 1677 AND 1815 CARRIERS
SCREW-IN FOR 1875, 1890, 1903, 1905,
1981 AND 1982 CARRIERS
FORWARD CARRIERS WITH IAD AND
DIFF. LOCK WITHOUT OIL PUMP
3200-M-1677, 3200-U-1815, 3200-C-1875,
3200-R-1890, 3200-E-1903, 3200-G-1905,
3200-E-1981, 3200-F-1982
IAD SHIFTER:
BOLT ON FOR 1645 CARRIER
SCREW-IN FOR 1814, 1852, 1860,
1874, 1917, 1978, 1979 AND 1980
NO OIL FILTER
NO DIFF. LOCK
FORWARD CARRIERS WITH IAD AND OIL PUMP
WITHOUT DIFF. LOCK: 3200-X-1662,
3200-V-1816, 3200-G-1853, 3200-D-1876,
3200-P-1914, 3200-H-1984, 3200-J-1986
NO DIFF. LOCK
FORWARD CARRIERS WITH IAD WITHOUT DIFF.
LOCK OR OIL PUMP: 3200-G-1645, 3200-T-1814,
3200-F-1852, 3200-N-1860, 3200-B-1874, 3200-S-1917,
3200-B-1978, 3200-C-1979, 3200-D-1980
THE FOLLOWING CARRIERS ARE EQUIPPED WITH A THRUST SCREW:
3200-A-1873, 3200-B-1874, 3200-C-1875, 3200-D-1876, 3200-E-1877, 3200-F-1904, 3200-G-1905,
3200-H-1906, 3200-M-1911, 3200-T-1918, 3200-P-1914, 3200-D-1980, 3200-F-1982, 3200-J-1986, 3200-L-1988
THE FOLLOWING CARRIERS ARE MACHINED FOR INTERNAL ABS SENSORS:
3200-F-1852, 3200-G-1853, 3200-S-1917
3
ITEM
1
DESCRIPTION
Nut - input yoke and shaft
1A
Washer - input shaft nut
4
5
6
Capscrew - input bearing cage
Washer - input bearing cage
Oil seal - input bearing cage
7, 10
8
9
10
11
Cup - input shaft bearing - outer
Cone - input shaft bearing - outer
Baffle - oil
Washer - oil baffle
Capscrew - oil baffle
Input shaft and nut assy.
Input shaft, nut, ball assy.
16
17
18
3" I.D.
3.25" I.D.
Bearing cage and cup assy. - input
Shim - input bearing cage .075mm/.003 inch
.125mm/.005 inch
.250mm/.010 inch
O-ring - input bearing cage
12
13
14
15, 1
REMARKS
Included in KIT 2826
Thrust washer - helical drive gear
Helical gear and forward side gear
Diff. case and pinion nest assy. - inter-axle
Less pump
With pump
Less pump 2"-39 spline
Less pump 2.38"-46 spline
2.38"-46 spline. With pump
Pump driven off flats on the input
shaft. 2"-39 spline
Pump driven off splines on the
input shaft. 2"-39 spline
Bolted
Bolted
29
29A
29B
Case halves and fastener hardware
Bolt
Washer
Spider
Pinion gear
Pinion gear thrust washer
Snap-ring - inter-axle differential
Clutch collar - inter-axle diff.
Side gear - inter-axle diff.
Shift fork - inter-axle diff.
Cone - rear side gear bearing
Cup - rear side gear bearing
Adjusting screw - shift shaft
Jam nut - adjusting screw
Spring - shift shaft return
Shift shaft - inter-axle differential
Shift assy. - inter-axle diff. air
Snap ring
Spring - shift
All prior to 8/91
PART NUMBER
40-X-1233
40-X-1237
1
1229-N-1730
1229-T-1736
7
MS-212045-1
7
1229-C-1511
1
R945008
A1-1205-X-2728
1
A-3226-V-1296
A-3226-B-1224
A-3226-D-1226
A-3226-Z-1222
Use as 2203-K-9241
req. 2203-L-9242
2203-M-9243
1
5-X-13431
1 ea. 5-X-13431
5-X-10341
1
3920
1
JM-511945
JM-511946
1
3221-P-1004
3
1229-E-1669
3
MS-208016-1
1
KIT 28342
A-3297-U-1347
A-3297-T-1346
KIT 28352
KIT 28332
1
1
1
All
All
All
All
All
All
All except "reverse-air"
All except "reverse-air"
Included in KIT 2686 and
KIT 2445
1229-S-4985
KIT 4007
A-3235-N-2380
A-3235-W-2025
1
8
1
4
All
Bolt-on style, Navistar only
(reverse-air)
(reverse-air)
Bolt-on style, serviced as
assembly only
Screw-in style, serviced as
assembly only
(reverse-air)
QTY
1
All from 8/91 to 11/93
1 5-X-1034 is used in pump groove. 5-X-1343 is used
in input cage.
4
All
All after 11/93
All prior to 11/93
All w/o pump
All w/o pump
All w/o pump
All prior to 11/93
All after 11/93
All
All
1978, 1979, 1980, 1981,
1982, 1984, 1986, 1987,
1988 carriers after 10/98
All except 1624 /
prior to 10/98
1624 carrier only
For bolted version only.
All after 10/98
Welded
18A
18B
18C
18D
18E
18F
19
20
21
22
23
24
25
26
27
28
CARRIER
All after 11/93
All prior to 11/93
All after 11/93
All prior to 11/93
All
All
All prior to 11/93
All after 11/93
All w/o pump after 11/93
All w/o pump prior to 11/93
All with pump after 11/93
All with pump prior to 11/93
All
1
1
1
1
1
1
1
1
1
1
1
KIT 2743
A2-3235-N-2380
MS210045A-1
1229-K-1597
3278-A-1119
2233-U-1035
1229-T-1606
2297-E-5335
3107-M-1183
2234-R-1188
3296-Z-1326
JLM-710949C
JLM-710910
41-X-1208
MN-312-1
2258-U-411
2244-K-1025
2244-D-1070
A-3261-R-1084
A-3261-L-350
KIT 2825
1
1
1229-P-4280
2258-E-1175
2 Must change input yoke to 2.35"-46 spline. See Service Kit section
for Bill of Material details.
ITEM
29C
29D
29E
29F
29G
29H
29J
29K
29L
29M
29N
30
31, 56, 57
DESCRIPTION
Gasket - shift assembly
Cover - shift assembly
Washer - shift assembly capscrew
Capscrew - shift assembly short
Capscrew - shift assembly to carrier
O-ring
O-ring
O-ring
Housing - shift
Piston - shift assembly
Snap ring
Capscrew - air shift assembly
Diff. carrier and cap assy. Kit incl. carrier and cap
assy. and screw-in IAD shifter. Main diff. lock
components included where applicable
REMARKS
(reverse-air)
CARRIER
1624, 1645, 1662, 1677
With pump and thrust screw, w/o
3200-P-1914
main diff. lock. Bolt-on reverse
IAD shifter
With pump, diff. lock and bolt-on
All 1624 except Navistar
IAD shifter
(Reverse-shift)
With pump, main diff. lock and
3200-T-1918
thrust screw. Bolt-on
With pump, w/o diff. lock with
bolt-on IAD shifter
(Reverse-shift)
With pump, w/o diff. lock with
3200-D-1876, 3200-J-1986
screw-in and IAD shifter, with
thrust screw
With pump, w/o diff. lock, with
3200-X-1662
bolt-on IAD shifter and thrust
(Reverse-shift only)
screw
3200-V-1816, 3200-H-1984
screw-in IAD shifter
3200-G-1853
screw-in IAD shifter, for use with
internal ABS sensor
With pump, with bolt-on diff. lock 3200-L-1624, 3200-D-1902
and IAD shifter, with thrust screw
3200-M-1677, 3200-E-1903
With pump, with screw-in diff.
3200-W-1817, 3200-P-1888,
lock and IAD shifter
3200-K-1987
With pump, with screw-in diff.
3200-E-1877, 3200-H-1906,
lock and IAD shifter, with thrust
3200-L-1988
screw
Without pump and main diff.
3200-N-1860, 3200-C-1979
lock, Aluminum carrier
Without pump and main diff.
3200-S-1917
lock, Aluminum carrier (for ABS)
Without pump or diff. lock for use
3200-F-1852
with internal ABS sensor, screwin IAD shifter
Without pump or diff. lock, for
3200-G-1645
use with bolt-on IAD shifter and
thrust screw
Without pump or diff. lock, with
bolt-on IAD shifter
(Reverse-shift)
Without pump or diff. lock, with
3200-T-1814, 3200-B-1978
screw-in IAD shifter
Without pump or diff.lock, with
3200-B-1874, 3200-D-1980
screw-in IAD shifter and thrust
screw
Without pump, with diff. lock and All 1677 except Navistar
bolt-on IAD shifter
(Reverse-shift)
Without pump, with screw-in diff. 3200-U-1815, 3200-R-1890,
lock and IAD shifter
3200-E-1981
Without pump, with screw-in diff. 3200-C-1875, 3200-G-1905,
lock and IAD shifter, with thrust
3200-F-1982
screw
QTY
1
1
6
2
4
1
1
1
1
1
1
1
1
PART NUMBER
2208-R-1058
3266-Q-1161
MWA-506
41-X-1080
MS-206060-1
5-X-1196
5-X-1197
5-X-1195
3261-R-1084
2230-D-1096
1229-W-1245
41-X-1209
A2-3200-P-1914
KIT 2705
A2-3200-T-1918
KIT 270718
A2-3200-J-1986
A2-3200-X-1662
A2-3200-H-1984
A2-3200-G-1853
A2-3200-D-1902
A2-3200-E-1903
A2-3200-K-1987
A2-3200-L-1988
A2-3200-C-1979
A2-3200-S-1917
A2-3200-F-1852
A2-3200-G-1645
KIT 2706
A2-3200-B-1978
A2-3200-D-1980
KIT 2704
A2-3200-E-1981
A2-3200-F-1982
18 For replacement information, contact Information Services at
888-725-9355.
5
ITEM
32
34
35, 44, 45
42
43
44
DESCRIPTION
Jam nut
Thrust screw
Drive gear, pinion and nut 2.64 Ratio
assembly
2.79 Ratio
2.93 Ratio
3.07 Ratio
3.21 Ratio
3.42 Ratio
3.58 Ratio
3.73 Ratio
3.90 Ratio
4.11 Ratio
4.33 Ratio
4.56 Ratio
4.63 Ratio
4.88 Ratio
5.29 Ratio
5.86 Ratio
6.14 Ratio
6.43 Ratio
6.83 Ratio
7.17 Ratio
3.36 Ratio
3.55 Ratio
3.70 Ratio
Cone - drive pinion inner bearing
Cup - drive pinion inner bearing
Shim - pinion inner
.075mm/.003 inch
bearing cup
.125mm/.005 inch
.250mm/.010 inch
Spacer - pinion bearing inner
Gear - helical driven
Spacer - pinion bearing 5.30mm/.209 inch
(variable thickness)
5.33mm/.210 inch
5.35mm/.211 inch
5.38mm/.212 inch
5.40mm/.123 inch
5.50mm/.217 inch
5.60mm/.220 inch
5.70mm/.224 inch
5.80mm/.228 inch
5.90mm/.232 inch
6.00mm/.236 inch
6.10mm/.240 inch
6.13mm/.241 inch
6.15mm/.242 inch
6.18mm/.243 inch
6.20mm/.244 inch
Cup - drive pinion outer bearing
Cone - drive pinion outer bearing
Washer - drive pinion nut
45
Nut - drive pinion
46
47
48
Cover - drive pinion
Washer - drive pinion cover
Capscrew - drive pinion cover
49
Adjusting ring - diff.
bearing
50
Cup - diff. bearing
36
37
38
39
40
41
1
3
5
7
6
L.H.
L.H. and R.H.
R.H.
L.H.
L.H. and R.H.
R.H.
Not available in the aluminum carrier.
Replaces B-41516-1 (3.91 ratio)
Used in special 145 applications only.
Included in KIT 2638.
REMARKS
CARRIER
Some models may not be
available in all ratios
Amboid gearing to be used only
if there is a rear/rear Amboid
carrier.
Included in KIT 1647 and
KIT 2429
Use with 40-X-1145
Use with 40-X-1233
M45x1.5-6H thd.
M50x2-6H thd.
All
All
All
All
All
All
All
All
145 series only
140, 144, 145 series only
140, 144, 145 series only
145 series only
All
All
All except aluminum
Aluminum only
All with diff. lock
All without diff. lock
All with diff. lock
All with diff. lock
All with diff. lock
2 Replaces A-39908-3 (2.80 ratio)
4 Replaces B-41518-1 (4.10 ratio)
6 2.10"-41 spline
QTY
1
1
Use 1
as req.
PART NUMBER
40-X-1016
41-X-1371
B-41718-11
A-41676-12
A-41104-1
A-41508-1
A-41510-1
B-41276-1
B-41512-1
B-41514-1
B-41678-13
B-41680-14
B-41278-1
B-41562-1
B-41280-1
B-41282-1
B-41284-1
B-41466-1
A-41468-1
A-41470-1
A-41472-1
A-41474-1
B-42214-1
B-42216-1
B-42218-1
1
H715334
1
H715311
Use as 2203-F-2788
req. 2203-G-2789
2203-H-2790
1
1244-V-1764
1
3892-N-4902
Use 2 2203-D-9806
as req. 2203-E-9807
2203-F-9808
2203-G-9809
2203-H-9810
2203-J-9812
2203-K-9813
2203-L-9814
2203-M-9815
2203-N-9816
2203-P-9818
2203-Q-9819
2203-R-9820
2203-S-9821
2203-T-9822
2203-U-9823
1
72487
1
72212C
1
1229-G-40635
1229-W-45217
1
40-X-12337
40-X-11455
1
3266-C-1095
5
1229-K-1597
5
MS-210020-1
MS-210030-1
1
2214-Y-1039
2
2214-C-1095
2214-C-1095
1
1
1228-L-1130
2
JM-716610
JM-716610
1
ITEM
51
DESCRIPTION
Cone - diff. bearing
52
53
54, 52, 53
REMARKS
L.H.
L.H. and R.H.
R.H.
Capscrew - main diff. case
Washer - main diff. case
Case assy. standard - main diff.
Ratios 2.64, 2.79, 2.93
Ratios 3.07, 3.21, 3.36
54, 52, 53, Case assy. with ABS tubes - main diff.
204, 205, 206
54, 52, 53, 59, Case & nest assy. standard - main diff.
60, 62, 63
54, 52, 53, 59, Case & nest assy. with ABS tubes - main diff.
60, 62, 63,
204, 205, 206
54, 52, 53,
63A
Case & nest assy. with NoSPIN diff. - main diff.
Ratios 3.42, 3.55, 3.58, 3.70,
3.73, 3.90, 4.11 (All except
RT44145 tandem)
Ratios 3.42, 3.58, 3.73, 3.90,
4.11 (RT44145 tandem only)
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
(RT44145 tandem only)
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
(Except RT44145 tandem)
Ratios 3.07, 3.21
Ratios 3.42, 3.58, 3.73, 3.90,
4.11 (All except RT44145
tandem)
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
(Except RT44145 tandem)
Ratios 2.64, 2.79, 2.93
With diff. lock
Without diff. lock
A2-3235-W-1843
A8-3235-W-1843
Use 1 A2-3235-M-21715
as req. A3-3235-M-21716
A2-3235-L-21709
A3-3235-L-21706
A3-3235-J-21686
A2-3235-J-21685
With diff. lock
Without diff. lock
Ratios 3.42, 3.55, 3.58, 3.70,
3.73, 3.90, 4.11 (All except
RT44145 tandem)
Ratios 3.42, 3.58, 3.73, 3.90,
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
(All except RT44145 tandem)
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
Ratios 3.07, 3.21
With diff. lock
Without diff. lock
Ratios 3.42, 3.58, 3.73, 3.90,
tandem)
Ratios 3.42, 3.58, 3.73, 3.90,
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
PART NUMBER
A-1228-L-1130
JM-716649
JM-716649
41-X-1327
1229-D-4632
A2-3235-V-1920
A8-3235-V-1920
A2-3235-S-1839
A8-3235-S-1839
A2-3235-U-1841
A8-3235-U-1841
KIT 2664
KIT 2665
KIT 2648
KIT 2647
With diff. lock
Without diff. lock
Ratios 3.42, 3.58, 3.73, 3.90,
tandem)
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
Ratios 2.64, 2.79, 2.93
QTY
1
2
1
16
16
Use 1
as req.
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
Ratios 3.07, 3.21, 3.36
Ratios 3.07, 3.21
5 2.00"-39 spline
9 2.00"-39 spline. No longer available.
CARRIER
All with diff. lock
All with diff. lock
All
All
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
Use 1 A3-3235-V-19206
as req. A9-3235-V-19206
A10-3235-V-19205
A3-3235-S-18396
A10-3235-S-18395
A9-3235-S-18396
A3-3235-U-18416
A10-3235-U-18415
A9-3235-U-18416
A11-3235-D-21886
A10-3235-D-21886
A3-3235-W-18436
A10-3235-W-18435
A9-3235-W-18436
A11-3235-T-21526
A10-3235-T-21526
Use 1 A4-3235-M-21715
as req. A5-3235-M-21716
A5-3235-L-21706
A4-3235-L-21705
A5-3235-J-21686
A4-3235-J-21685
Use 1 A11-3235-V-19206
as req. A12-3235-V-19205
A12-3235-S-18395
A11-3235-S-18396
A11-3235-U-18416
A12-3235-U-18419
A4-3235-D-21886
A12-3235-W-18435
A11-3235-W-18436
6 2.10"-41 spline
7
ITEM
54, 52, 53,
63A (Cont)
DESCRIPTION
Case & nest assy. with NoSPIN diff. - main diff.
55
55A
Bolt - gear to case
Rivet - gear to diff. case
56
57
Washer - diff. bearing cap
Capscrew - diff. bearing cap
58
Pin - adjusting ring lock
59
60
REMARKS
Ratios 4.30, 4.56, 4.63, 4.88,
5.29, 5.86, 6.14, 6.43, 6.83, 7.17
For service, rivets can be
replaced with KIT 2317
L.H.
L.H. and R.H.
R.H.
Thrust washer - side gear (Items 59-63 are not used
in NoSPIN models. See Item 63A)
Side gear – differential (Items 59-63 are not used
61
62
63
63A
64
65
Spider - differential (cross) (Items 59-63 are not used
Gear - differential pinion (Items 59-63 are not used
Thrust washer - diff. pinion (Items 59-63 are not
used in NoSPIN models. See Item 63A)
NoSPIN diff. nest
Washer - gear to diff. case
Nut - gear to diff. case
CARRIER
All
All except aluminum
Aluminum only
All with diff. lock
All with diff. lock
All after 11/93
All prior to 11/93
All 40,000 lb. tandems
after 11/93
after 11/93
RT44145 tandems
after 11/93
prior to 11/93
prior to 11/93
RT44145 tandems
prior to 12/92
RT44145 tandems
from 1/93 to 11/93
All exc 44,000 lb. tandems
44,000 lb. tandems only
All axles except RT44145
tandems produced after 1/93
RT44145 tandems produced
after 1/93
Serviced as assembly only.
Replaces items 59-63.
Note: The following parts are used only on forward carriers with main differential lock.
66
Sensor/switch - main diff. lock
66A
Clip - sensor/switch
66B
Plug - DCDL switchport (non shown)
Non-DCDL applications only
67
Lock nut - sensor/switch
68
Spring - main diff. lock
69
70
Roll pin - spring retaining
Shift shaft - main diff. lock
71
Piston - main diff. lock
72
O-ring piston
73
73A
73B
74
75
Tube - air cylinder
Air cylinder assembly - screw-in
Plug - screw-in DCDL cylinder hole (not shown)
Gasket - air cylinder cover
Capscrew - manual engaging
75A
76
77
O-ring - manual engaging capscrew
Cover - air cylinder
Plug - air cylinder cover
5 2.00"-39 spline
8
Not Threaded for fork
Threaded for fork
All 34,000 lb. capacity
tandems
All 40,000 & 44,000 lb.
capacity tandems
All
All
All prior to 11/93
All after 11/93
All prior to 11/93
All after 11/93
All prior to 11/93
All after 11/93
All prior to 11/93
All after 11/93
All prior to 11/93
All prior to 11/93
All after 11/93
QTY
PART NUMBER
Use 1 A4-3235-T-21526
as req.
12
12
41-X-1216
RV-71016
4
4
42-X-1021
MS-220120-1
41-X-1365
1246-P-1134
1199-R-2176
1199-R-2176
1229-V-4624
1229-X-4522
2234-U-12696
1
2
1
2
2
2234-V-12705
2234-X-12726
KIT 27596
KIT 27585
KIT 26966
KIT 27606
1
4
2233-X-1116
4
1229-R-1032
1
A-3230-U-10355
A-3230-T-10346
12
12
1229-U-1503
40-X-1182
1
1
3237-W-1167
2257-M-1235
41-X-1022
1227-P-1056
2258-N-1262
2258-L-714
43-X-1006
KIT 2824
2244-L-1026
2230-T-1190
2230-N-170
5-X-1198
5-X-1153
3196-F-32
3261-A-1067
1250-U-1217
2208-H-944
41-X-1333
41-X-1368
5-X-521
3266-F-1020
MS-210016-1
1
1
1
1
1
1
1
1
All prior to 11/93
All after 11/93
Prior to 11/93
Prior to 11/93
6 2.10"-41 spline
3278-S-305
3278-Y-1117F
2233-J-1024
1
1
1
1
1
ITEM
78
79
80
81
82
83
DESCRIPTION
Gasket - plug
Capscrew - air cylinder cover
Washer - air cylinder cover
Clutch collar
Shift fork
Pin - shift fork
REMARKS
Not threaded
Threaded
Old 3 piece design
Note: The following parts are used only on forward carriers with oil pump.
84
Shield - filter
85
Plug - oil pressure relief valve
No longer required as of 5/97
86
Washer - plug
87
Spring - oil pressure relief valve
88
Pressure relief valve - oil
89
Input cage to oil pump dowels
No longer used
90
O-ring, oil pump
91
Oil pump assembly
Serviced as assembly only
92
93
94
95
96
CARRIER
Prior to 11/93
All after 11/93
All prior to 11/93
Pump driven off flats on
input shaft
Pump driven off splines on
input shaft
Washer - oil pump
Capscrew - oil pump
Oil filter
Adapter - oil filter
Screen and plumb assy. - oil filter
Note: The following parts are used only on forward carriers with internally mounted anti-lock brake system sensors.
200
Wave washer
201
Snap ring
202
Snap ring
203
Sensor assembly
204
Sensor drive tube
39 Spline
Use KIT 2511
41 Spline
Use KIT 2512
205
Washer tube spacing
206
Snap ring tube retaining
2 Must change input yoke to 2.35"-46 spline.
10 Replaced old three piece design (3296-N-1080)
QTY
1
4
4
1
1
2
PART NUMBER
2208-L-1000
41-X-1364
MWA-506
3107-D-1018
3296-Z-1170
3296-W-116710
43-X-1007
1
1
1
1
1
2
1
1
3280-Z-8398
1250-N-108011
1229-F-4062
2258-Z-1118
2297-U-5273
1246-M-1131
5-X-1034
KIT 28352
A-3303-P-1030
6
6
1
1
1
1229-E-1669
MS-208045-1
3280-V-8394
2297-Z-5278
A-2297-D-5334
2
2
2
2
2
2258-U-1243
1229-U-4519
1229-B-4422
SA1-3280-U-8861
3216-S-4361
3216-Q-4359
42-X-1248
1229-H-4428
2
2
11 Pressure relief plug eliminated. The relief valve and spring are
now sandwiched between the pump and input cage before the pump
is assembled to the cage.
9
CHART 2
CARRIERS FOR SINGLE AXLES AND REARS OF TANDEM AXLES
(Use with Figure 2, Inside Front Cover)
VISUAL IDENTIFICATION OF REAR CARRIERS
NO BULGE
BULGE
REAR CARRIERS
WITHOUT DIFF. LOCK
3200-Q-1785
3200-C-1849
3200-E-1851
3200-S-1865
3200-A-1873
3200-Z-1924
BEARING
CAGE RIBS
ON SOME
MODELS
REAR CARRIER
WITHOUT DIFF. LOCK
3200-M-1547
RIBS
DIFF. LOCK
REAR CARRIER
WITH DIFF. LOCK
3200-M-1547
BULGE
RIBS
BEARING
CAGE RIBS
ON SOME
MODELS
DIFF. LOCK
REAR CARRIERS
WITH DIFF. LOCK
3200-X-1558
3200-C-1849
3200-E-1851
3200-S-1865
3200-A-1873
NO DIFF. LOCK
REAR CARRIER
WITHOUT DIFF. LOCK
3200-L-1676
3200-M-1885
REAR CARRIER
WITHOUT DIFF. LOCK
3200-R-1500
THE FOLLOWING CARRIERS ARE EQUIPPED WITH A THRUST SCREW:
3200-Z-1872, 3200-A-1873, 3200-F-1904, 3200-Z-1924
THE FOLLOWING CARRIERS ARE MACHINED FOR INTERNAL ABS SENSORS:
3200-D-1850, 3200E-1851, 3200-Z-1924
3200-W-2051 CARRIER (not pictured) IS EQUIPPED WITH A THRUST SCREW,
HAS INTEGRAL PINION BEARING CAGE AND IS NOT AVAILABLE WITH DIFF. LOCK.
10
ITEM
97
DESCRIPTION
Nut - drive pinion
REMARKS
97A
Washer - drive pinion nut
100
Oil seal - pinion bearing cage
101
Cone - drive pinion outer bearing
Amboid series
102
Cup - drive pinion outer bearing
Amboid series
103
Capscrew - input bearing cage
104
Washer - input bearing cage
105, 102, 108 Pinion bearing cage and cup assy.
106
107
Shim - pinion bearing
cage
Spacer - pinion bearing
.076mm/.003 inch
.127mm/.005 inch
.254mm/.010 inch
.075mm/.003 inch
.125mm/.005 inch
.250mm/.010 inch
.500mm/.020 inch
.075mm/.003 inch
.125mm/.005 inch
.250mm/.010 inch
.500mm/.020 inch
9.40mm/.370 inch
9.43mm/.371 inch
9.45mm/.372 inch
9.48mm/.373 inch
9.50mm/.374 inch
9.60mm/.378 inch
9.70mm/.382 inch
9.80mm/.386 inch
9.90mm/.390 inch
10.00mm/.394 inch
10.10mm/.398 inch
10.20mm/.402 inch
10.23mm/.403 inch
10.25mm/.404 inch
10.28mm/.405 inch
10.30mm/.406 inch
8.75mm/.345 inch
8.78mm/.346 inch
8.80mm/.347 inch
8.83mm/.348 inch
8.85mm/.349 inch
8.98mm/.345 inch
9.10mm/.358 inch
9.13mm/.359 inch
9.15mm/.360 inch
9.18mm/.361 inch
9.20mm/.362 inch
3200-Q-1785, 3200-C-1849,
3200-E-1851, 3200-S-1865,
3200-A-1873, 3200-Z-1924
3200-R-1500, 3200-X-1558,
3200-L-1676, 3200-M-1885,
3200-Z-1872, 3200-G-1879,
3200-F-1904
Included in KIT 1647 /
Shim O.D. 5.19 inches
CARRIER
All except RS17140
RS17140 only
All except RS17140
RS17140 only
All except RS17140
RS17140 only
3200-W-2051
All except RS17140 and
3200-W-2051
RS17140 only
3200-W-2051
3200-W-2051
RS17140
All except aluminum
Aluminum only
All
RR17144, RR19144,
RR17145, RR19145,
RR20140, RR20145,
RR22145
RS17140
3200-W-2051
Use with carriers that use
A-3226-M-1053 &
A-3226-P-1056 pinion
bearing cage
Use with carriers that use
A-3226-N-1236 pinion
bearing cage
3200-W-2051
3200-W-2051
2 Order KIT 2636 to purchase nut and washer.
9 For carriers with Telma Retarders or parking brakes call
specifications for different cage, (888) 725-9355.
QTY
1
1
1
1
1
8
8
1
PART NUMBER
40-X-12373
40-X-12362
1229-T-1736
1229-A-2653
A1-1205-Z-2730
A-1205-D-1928
72225C
55206C
M804049
72487
55437
M804010
MS-212045-1
41-X-1043
1229-C-1511
A-3226-N-1236
A-3226-M-10539
A-3226-P-1056
Use as 2203-F-2788
req. 2203-G-2789
2203-H-2790
2803-Q-2851
2803-R-2852
2803-S-2853
2803-T-2854
2203-C-8115
2203-D-8116
2203-E-8117
2203-B-9804
Use 2 1244-M-2431
as req. 1244-N-2432
1244-P-2434
1244-Q-2435
1244-R-2436
1244-S-2437
1244-T-2438
1244-U-2439
1244-V-2440
1244-W-2441
1244-X-2442
1244-Y-2443
1244-Z-2444
1244-A-2445
1244-B-2446
1244-C-2447
2203-J-9474
2203-K-9475
2203-L-9476
2203-M-9477
2203-N-9478
2203-P-9480
2203-Q-9481
2203-R-9482
2203-S-9483
2203-T-9484
2203-U-9485
11
ITEM
107 (Cont)
DESCRIPTION
8.35mm/.329 inch
8.38mm/.330 inch
8.40mm/.331 inch
8.43mm/.332 inch
8.45mm/.333 inch
8.58mm/.338 inch
8.70mm/.343 inch
8.73mm/.344 inch
8.75mm/.345 inch
8.78mm/.346 inch
8.80mm/.347 inch
107A
108
Cup - drive pinion inner bearing
Amboid series
109
Cone - drive pinion inner bearing
Amboid series
110, 97, 97A Drive gear, pinion and
nut assy
3.42 Ratio
3.58 Ratio
3.73 Ratio
3.91 Ratio
4.10 Ratio
4.30 Ratio
4.33 Ratio
4.56 Ratio
4.88 Ratio
5.13 Ratio
5.29 Ratio
5.57 Ratio
5.86 Ratio
6.14 Ratio
6.43 Ratio
6.83 Ratio
7.17 Ratio
2.64 Ratio
2.79 Ratio
2.93 Ratio
3.07 Ratio
3.21 Ratio
2.64 Ratio
2.79 Ratio
3.08 Ratio
3.36 Ratio
3.55 Ratio
3.70 Ratio
3.90 Ratio
4.11 Ratio
3.42 Ratio
3.58 Ratio
3.73 Ratio
3.90 Ratio
3.91 Ratio
4.10 Ratio
4.11 Ratio
4.33 Ratio
4.63 Ratio
4.88 Ratio
1 Not available in the aluminum carrier.
12 Coach quality gearing
16 No longer available.
12
REMARKS
Input spline size 2.00" dia. - 39
splines. Original small pitch dia.
ring gear. New style will not fit in
this carrier.
CARRIER
RS17140 only
3200-W-2051 only
3200-W-2051
3200-W-2051
RS17140 only
3200-W-2051
3200-W-2051
RS17140 only
3200-Q-1785
splines. New larger pitch
diameter gearing.
3200-R-1500, 3200-X-1558,
3200-L-1676, 3200-M-1885,
3200-Z-1872, 3200-G-1879,
3200-F-1904
splines. Amboid series axles.
3200-W-2051
diameter gearing. For 4.56 ratio
use B-41542-1
All except RS16140,
RS17140, 3200-Q-1785 and
3200-W-2051 carriers.
QTY
PART NUMBER
Use 2 2203-V-9486
as req. 2203-W-9487
2203-X-9488
2203-Y-9489
2203-Z-9490
2203-A-9491
2203-B-9492
2203-C-9493
2203-D-9494
2203-E-9495
2203-F-9496
1
1244-F-2346
1
H715311
72487
1
55437
H715334
72212C
55200C
Use 1 B-41530-1
as req. B-41532-1
B-41534-1
B-41536-1
B-41538-1
Use 4.33 Ratio
B-41540-1
B-41542-1
B-41544-1
B-41546-1
B-41548-1
B-41550-1
B-41552-1
B-41554-1
B-41556-1
B-41558-1
B-41560-118
B-41716-11
A-41682-111
A-41158-1
A-41494-1
A-41496-1
B-42120-1
A-42172-1
A-42200-1
A-42202-1
A-42204-1
B-42206-1
B-42180-116
A-42128-1
B-41164-1
B-41498-1
A-41842-112
B-41500-1
B-41684-113
A-41830-112
A-41802-112
B-41686-114
B-41266-1
A-41654-115
B-41268-1
A-41672-112
B-41270-1
A-41714-112
15 Coach quality gearing. 4.33 coach quality uses diff. case for
3.42 - 4.11.
888-725-9355.
ITEM
DESCRIPTION
110, 97, 97A Drive gear, pinion and
(Cont)
nut assy
CARRIER
QTY
PART NUMBER
Use 1 A-41652-112
All except RS16140,
RS17140, 3200-Q-1785 and as req. A-41272-1
3200-W-2051 carriers.
5.29 Ratio
A-42272-112
B-41274-1
5.57 Ratio
A-41304-1
A-42086-112
5.86 Ratio
A-42464-112
B-41456-1
6.14 Ratio
A-41458-1
6.43 Ratio
A-41460-1
6.83 Ratio
A-41462-1
7.17 Ratio
B-43426-1
RS16140, RS17140
3.42 Ratio
A-41164-3
splines.
3.58 Ratio
A-41498-316
3.73 Ratio
A-41500-3
3.90 Ratio
A-41684-317
4.11 Ratio
A-41686-316
4.33 Ratio
A-41266-3
4.56 Ratio
B-41542-3
4.88 Ratio
A-41270-3
5.13 Ratio
A-41272-316
5.29 Ratio
A-41274-316
5.57 Ratio
A-41304-3
5.86 Ratio
A-41456-3
6.43 Ratio
A-41460-3
6.83 Ratio
A-41462-316
A-41464-316
7.17 Ratio
111
Bearing - drive pinion spigot
All
1
1228-F-552
112
Snap ring - drive pinion bearing
All
1
1229-A-1301
113, 114, 115 Diff. carrier and cap assy.
Original design
3200-R-1500
1
A2-3200-R-1500
Without main diff. lock
3200-M-1547
KIT 272918
(3.91 and 4.10 Ratios)
All other ratios
KIT 2730
1676 (all ratios)
A2-3200-L-1676
A2-3200-S-1865
1785, 1865
(3.42 - 7.17 ratios)
With screw-in main diff. lock
3200-G-1879
A2-3200-G-1879
With screw-in main diff. lock and
1904 (all ratios)
A2-3200-F-1904
thrust screw
Without main diff. lock, with
1873 (3.42 - 7.17 ratios)
A2-3200-A-1873
thrust screw
1850 (3.07 & 3.21 ratios)
A2-3200-D-1850
internal ABS sensor
A2-3200-E-1851
1851 (3.42 - 7.17 ratios)
Without main diff. lock, aluminum 3200-M-1885 (aluminum
A2-3200-M-1885
carrier
version of 1676 carrier)
3200-C-1849 (aluminum
A2-3200-C-1849
version of 1865 carrier)
3200-Z-1924
A2-3200-Z-1924
thrust screw with internal ABS
sensor
Amboid series drive axles
3200-W-2051
A2-3200-W-2051
113A
Thrust screw
3200-W-2051
1
10-X-1710
All except 3200-W-2051
41-X-1371
113B
Jam nut – thrust screw
1
40-X-1016
113C
Thrust block
3200-W-2051 only
1
2297-P-8336
114
Washer - differential bearing cap
All
4
42-X-1021
115
Capscrew - differential bearing cap
All except aluminum
4
MS-220120-1
Aluminum only
41-X-1365
116
Adjusting ring
L.H. - small
2214-C-1095
1547, 1558, 1879, 1904
1
R.H. - small
2214-Y-1039
2
3200-R-1500
2214-L-272
L.H. and R.H.
All except 1500, 1547, 1558
2214-C-1095
3200-E-1851
2214-U-1139
117
Adjusting ring lock
L.H. and R.H. Diff. lock
1547, 1676, 1785, 1865
1
KIT 4284
L.H. and R.H. Non diff lock
1558, 1879, 1904
KIT 4284
1199-R-2176
L.H. only
R.H. see 132, 133 and 134
3200-R-1500
5.13 Ratio
12 Coach quality gearing
REMARKS
diameter gearing. For 4.56 ratio
use B-41542-1
888-725-9355.
13
ITEM
118
118A
119
120
121
122
122A
DESCRIPTION
Cup - diff. ring
REMARKS
L.H. only
R.H. only
L.H. and R.H.
1676, 1785, 1865, 1873,
2051
3200-R-1500
Adhesive - diff. bearing cup
Cone - diff. bearing
L.H. only
R.H. only
L.H. and R.H.
Nut - gear to differential case
Washer - gear to differential case
Bolt - differential case to gear
Rivet - gear to differential
123, 129, 130 Case assy - main diff.
Ratios 2.64, 2.79, 2.93
Ratios 3.07, 3.08, 3.21,
3.36
1547, 1558, 1879, 1904
For service, rivets can be
replaced with KIT 2317
With diff. lock
Without diff. lock
With diff. lock
123, 129, 130, Case assy. - main diff.
204, 205, 206
1676, 1785, 1865, 1873,
2051
3200-R-1500
All
All
2
A1-1228-H-60610
2297-T-4180
JM-716649
A-1228-L-1130
JM-716649
12
12
12
12
A1-1228-H-60610
40-X-1182
1229-U-1503
41-X-1216
RV-71016
1
1
Without diff. lock
3200-A-1873
KIT 2647
Without diff. lock
With ABS tubes
Use 1 A2-3235-N-21729
as req. A3-3235-N-21726
A2-3235-M-21715
A3-3235-M-21716
A1-3235-Y-22616
With diff. lock
Without diff. lock
With diff. lock
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
Ratios 2.64, 2.79, 2.93
With diff. lock
Without diff. lock
With diff. lock
Without diff. lock
Ratios 3.07 and 3.21
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(44,000 lb tandem axles
only)
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(except 44,000 lb)
Note: 4.33 ratio for coach
quality gearing also uses
this std. diff. case
14
PART NUMBER
JM-716610
1228-L-1130
JM-716610
Use 1 A2-3235-V-1920
as req. A8-3235-V-1920
A2-3235-S-1839
A2-3235-Y-174116
A8-3235-S-1839
A-3235-S-1839
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(44,000 lb tandem axles
only)
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
44,000 lb. tandem axles)
quality gearing use diff.
case for ratios 3.42-4.11
5 2.00”-39 spline
9 2.00”-39 spline. No longer available.
10 Sold as a cup and cone set only.
QTY
1
1
2
1558, 1879
1676, 1885, 2051
1558, 1879
A12-3200-R-1500
1676, 1885, 2051
3200-M-1547 except
1.85"-36 spline
1558, 1849, 1879, 1904
A12-3200-R-1500
3200-M-1547 except
1.85"-36 spline
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
3200-R-1500
1676, 1785, 1865, 1885,
2051
1872 and 1904
All others
1873
All others
1558, 1849, 1879, 1904
A12-3235-R-1500
3200-M-1547
except 1.85"-36 splines
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
3200-R-1500
1676, 1785, 1865, 1885
1872, 1904
Without diff. lock
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
44,000 lb tandem axles)
this std. diff. case.
CARRIER
1547, 1558, 1879, 1904
A2-3235-U-1841
A6-3235-C-1719
A-3235-U-1841
A-3235-N-1938
A13-3235-C-17196
A8-3235-U-1841
A2-3235-D-2188
KIT 2664
A-3235-D-2188
KIT 2665
A2-3235-W-1843
A8-3235-E-1721
A-3235-W-1843
A-3235-Q-1941
A15-3235-E-17216
A8-3235-W-1843
KIT 2648
A3-3235-L-21706
A2-3235-L-21709
6 2.10"-41 spline
ITEM
DESCRIPTION
123, 129, 130, Case assy. - main diff.
204, 205, 206
(Cont)
123 thru 130 Case & nest assy main
diff.
REMARKS
Ratios 4.30, 4.33, 4.56,
Without diff. lock
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 2.64, 2.79, 2.93
With diff. lock
Ratios 3.07, 3.08, 3.21 and
3.36
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 2.64, 2.79, 2.93
Without diff. lock
Ratios 3.07, 3.08, 3.21,
3.36
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(44,000 lb. tandem axles
only
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
only
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
Ratios 3.07, 3.08, 3.21,
3.36
5 2.00"-39 spline
CARRIER
With ABS tubes
QTY
PART NUMBER
Use 1 A1-3235-K-21696
as req.
A2-3235-J-21685
A3-3235-J-21686
1558 and 1879
Use 1 A3-3235-V-19206
as req. A3-3235-S-18396
A3-3235-U-18416
A3-3235-W-18436
1676, 1885
1676, 1885, 2051
1676, 1885
1676, 1885, 2051
1676, 1785, 1865 and 1885
A10-3235-V-19205
A9-3235-V-19206
A10-3235-S-18395
A9-3235-S-18396
A10-3235-U-18415
1676, 1785, 1865,
1885, 2051
A9-3235-U-18416
1676, 1785, 1865,
3200-M-1885
A9-3235-W-18436
A10-3235-W-18435
With diff. lock
1872 and 1904
A11-3235-D-21886
A11-3235-T-21526
Without diff. lock
3200-A-1873
A10-3235-D-21886
Without diff.lock
3200-L-1676, 3200-A-1873
A10-3235-T-21526
Without diff. lock
3200-M-1547
except 1.85"-36 spline
A1-3235-S-18396
6 2.10"-41 spline
15
ITEM
DESCRIPTION
123 thru 130 Case & nest assy main
(Cont)
diff.
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 2.64, 2.79, 2.93
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 3.07, 3.08, 3.21,
3.36
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
Ratios 3.42, 3.55, 3.58,
3.70, 3.73, 3.90, 3.91,
4.10, 4.11 (Except
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
123, 129, 130, Case & nest assy. main Ratios 4.30, 4.33, 4.56,
131
diff.
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (except
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(except 44,000 lb)
5 2.00"-39 spline
9 2.00”-39 spline. No longer available.
16 No longer available
16
REMARKS
Without diff. lock
CARRIER
3200-M-1547 except
1.85"-36 spline
QTY
PART NUMBER
Use 1 A1-3235-U-18416
as req.
A1-3235-W-18436
3200-M-1885
3200-R-1500
A18-3235-V-19206
A12-3235-C-17197
A14-3235-E-17217
With diff. lock
A12-3200-R-1500
A3-3235-Y-174116
A4-3235-C-17196
A6-3235-E-17216
Without diff. lock
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
A1-3235-N-1938
A1-3235-Q-1941
NoSPIN diff.
1676, 1785, 1865 and 1885
1676, 1785, 1865, 1885
6 2.10"-41 spline
7 2.10"-41 spline. No longer available.
Use 1 A12-3235-W-18435
as req.
A11-3235-W-18436
A12-3235-U-18419
ITEM
DESCRIPTION
123, 129, 130, Case & nest assy. main Ratios 3.42, 3.58, 3.73,
131 (Cont) diff.
3.90, 3.91, 4.10, 4.11
(Except 44,000 lb)
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
only
Ratios 2.64, 2.79, 2.93
REMARKS
NoSPIN diff.
CARRIER
1676, 1785, 1865, 1885
QTY
PART NUMBER
Use 1 A11-3235-U-18416
as req.
3200-A-1873
A4-3235-D-21886
3200-L-1676
A12-3235-V-19205
A11-3235-V-19206
A12-3235-S-18395
A11-3235-S-18396
A4-3235-T-21526
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
123 thru 130, Case & nest assy - main Ratios 2.64, 2.79, 2.93
204, 205, 206 diff.
3200-L-1676
3200-A-1873
Without diff. lock
With ABS tubes
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
only)
Ratios 3.42, 3.58, 3.73,
3.90, 3.91, 4.10, 4.11
(Except 44,000 lb. tandem
axles) Note: 4.33 Ratio for
coach quality gearing also
uses this std. diff. case
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (44,000 lb.
tandem axles only)
Ratios 4.30, 4.33, 4.56,
4.63, 4.88, 5.13, 5.29,
5.57, 5.86, 6.14, 6.43,
6.83, 7.17 (Except
124
125
Thrust washer - side gear
Side gear - differential
A4-3235-L-21705
A5-3235-L-21706
A2-3235-K-21696
A4-3235-J-21685
A5-3235-J-21686
Not used on NoSPIN
4 1.85 in.-36 spline
6 2.10"-41 spline
Use 1 A6-3235-N-21725
as req. A7-3235-N-21726
A4-3235-M-21715
A5-3235-M-21716
A2-3235-Y-22616
All after 11/93
All prior to 11/93
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
RS16140, RS17140,
3200-M-1547
RS16140, RS17140,
RS17145 after 11/93
RS16140, RS17140,
RS17145 prior to 11/93
RS21145 and RR20145
after 11/93
RS21145 and RR20145
prior to 11/93
RT44145 tandems
after 11/93
RT44145 tandems
from 1/93 to 11/93
RT44145 tandems
prior to 1/93
2
1229-V-4624
1229-X-4522
1229-Z-3172
2
2234-T-10864
2234-V-12705
KIT 27585
2234-U-12696
KIT 27596
2234-X-12726
KIT 27606
KIT 26966
5 2.00"-39 spline
17
ITEM
126
DESCRIPTION
Thrust washer - diff. pinion
127
Gear - differential pinion
REMARKS
128
Spider - differential (cross)
129
130
130A
131
131A
131B
131C
Washer - main diff. case halves
Capscrew - main diff. case halves
Thread locking liquid
NoSPIN diff. nest assembly
Cover - special carrier - w/o diff. lock
Washer - cover - w/o diff. lock
Capscrew - cover - w/o diff. lock
Serviced as assy. only.
Replaces Items 124-128
Without diff. lock
Note: The following parts are used only on rear carriers with main differential lock.
132
Lock plate - adjusting ring R.H.
133
Washer - lock plate
134
Capscrew - lock plate
135
Clutch collar - main diff. lock
136
Shift fork
137
138
Pins - shift fork
Spring - main diff. lock
139
Shift shaft - main diff. lock
140
141
142
Pin - spring retaining
Tube - air cylinder
Piston - air cylinder
143
O-Ring - piston
144
145
Gasket - air cylinder cover
Capscrew - manual engaging
145A
146
146A
146B
O-ring - manual engaging capscrew
Cover - air cylinder
Shift cylinder assembly
Plug - screw-in DCDL cylinder hole
5 2.00"-39 spline
10 Replaced old three piece design (3296-N-1080)
18
Old 1 pc. design
New 1 pc. design
Original 3 pc. design
Original design
Original design
CARRIER
All except 1.85"-36 spline
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
and RT44145 tandems
produced after 1/93
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
RT44145 tandems
produced after 1/93
and RT44145 tandems
produced after 1/93
RS16140, RS17140,
3200-M-1547
(1.85"-36 spline)
RT44145 tandems
produced after 1/93
All
All
All
3200-M-1547
(1.85"-36 spline)
RS16140, RS17140,
RR17145, RR19145
(except 3200-M-1547
1.85"-36 spline)
RS17144, RS19144,
RS21145, RR17144,
RR19144, RR20145,
RR22145
3200-R-1500
3200-R-1500
3200-R-1500
3200-R-1500
1558, 1872, 1879, 1904
3200-R-1500
1558, 1872
1879, 1904
3200-R-1500
All
1500, 1558, 1872
1879, 1904
1558, 1872
1879, 1904
3200-R-1500
All
All bolt-on designs
Bolt-on shifter
Screw-in shifter
Bolt-on shifter
Screw-in shifter
1558, 1872
1879, 1904
3200-R-1500
All bolt-on designs
Screw-in design
6 2.10"-41 spline
QTY
4
4
PART NUMBER
1229-R-1032
1229-L-1026
2233-J-1024
2233-M-1027
2233-X-1116
1
3278-S-305
3278-D-82
3278-Y-1117F
16
16
as req.
1
1229-D-4632
41-X-1327
2297-C-7049
A-3230-V-1036
A-3230-U-10355
A-3230-T-10346
1
4
1
3266-M-897
MWA-508
41-X-1080
1
2
2
1
1220-K-89
MWA-508
MS-208020-1
3107-D-1018
3107-R-100616
3296-W-116710
3296-Z-1170
3296-F-188
43-X-1007
2258-L-714
2258-N-1262
2244-L-1026
KIT 2824
2244-Z-52
43-X-1006
3196-F-32
2230-N-170
2230-T-1190
5-X-1153
5-X-1198
2208-H-944
41-X-1330
41-X-1368
41-X-1333
5-X-521
3266-F-1020
3261-A-1067
1250-U-1217
1
2
1
1
1
1
1
1
1
1
1
1
1
ITEM
147
DESCRIPTION
Capscrew - air cylinder cover
148
149
150
151
151A
151B
152
Washer - air cylinder cover
Gasket - plug
Plug - air cylinder cover
Sensor/switch - main diff. lock
Clip - sensor/switch
Plug - DCDL switchport
Nut - sensor/switch
REMARKS
CARRIER
1558, 1872
3200-R-1500
All bolt-on designs
1500, 1558, 1872
Note: The following parts are used only on rear carriers with internally mounted anti-lock brake system sensors.
200
Wave washer
201
Snap ring
202
Snap ring
203
Sensor assembly
204
Sensor - drive tube
39 spline
Use KIT 2511
41 spline
Use KIT 2512
205
Washer - tube spacing
206
Snap ring - tube retaining
QTY
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
PART NUMBER
41-X-1359
41-X-1364
MWA-506
2208-L-1000
MS-210016-1
3237-W-1167
2257-M-1235
41-X-1022
1227-P-1056
2258-U-1243
1229-U-4519
1229-B-4422
SA1-3280-U-8861
3216-S-4361
3216-Q-4359
42-X-1248
1229-H-4428
XpresswayPlus.com
Don't forget about using XpresswayPlus.com for:
y Ordering parts online
y Reference Library
y Order status
y The Company Store
y Price and availability
y Easy to use navigating instructions
y Visual search for new users
y Dealer/Distributor locator
y Online e-mail or phone numbers for Customer Service, Information Services,
Marketing, Catalog, and eSupport
XpresswayPlus is easy to use, can reduce phone calls, and save you valuable time.
19
OUTPUT (THRU) SHAFT ASSEMBLY PARTS
ITEM
153
154
DESCRIPTION
Output (thru) shaft, bearing cage and seal
assembly
Shaft - output (thru)
155
156
Silastic gasket
Bearing cage and inner cup assembly - output
REMARKS
(Includes Items 154, 156, 159,
160, 161, 162, 163, 164, 165)
3 oz. tube
Must change yoke to
2"-39 spline
156A
157
158
159
Deflector (no longer used)
Washer - output bearing cage
Capscrew - output bearing cage
Cup - inner and outer output bearing
160
Cone - inner and outer output bearing
161
Snap ring spacer - output bearing (variable
thickness) (Spacer kits are available to service
these assemblies) KIT 530 is used for the
original design 140 tandem. KIT 576 is used for
all other models in this catalog
3.94mm/.155 inch
4.01mm/.158 inch
4.09mm/.161 inch
4.17mm/.164 inch
4.24mm/.167 inch
4.32mm/.170 inch
4.39mm/.173 inch
4.47mm/.176 inch
4.55mm/.179 inch
4.62mm/1.82 inch
162
Snap ring spacer - output bearing/yoke
163
Oil seal - output bearing cage
164
Washer - output yoke and shaft
165
Nut - output yoke and shaft
1 Use A1-1205-Y-2729 seal & sleeve. Do not use deflector.
20
AXLE MODEL
All
QTY
1
All others
Original design 140 tandem
All
All others
1
1
1
1
1
3297-E-1019
3297-N-1158
2297-A-7021
A-3226-T-1112
A1-3226-T-1112S
All
All
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
All others
1
4
4
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
KIT 25831
1229-K-1597
15-X-387
JLM-104910
LM-603011
LM-104949
LM-603049
1229-P-2590
1229-A-2237
1229-Q-2591
1229-B-2238
1229-R-2592
1229-C-2239
1229-S-2593
1229-D-2240
1229-T-2594
1229-E-2241
1229-U-2595
1229-F-2242
1229-V-2596
1229-G-2243
1229-W-2597
1229-H-2244
1229-X-2598
1229-J-2246
1229-Y-2599
1229-K-2247
1229-W-4131
1829-A-859
A-1205-G-2425
A1-1205-Y-2729
1229-A-2653
1229-T-1736
40-X-12362
40-X-12373
PART NUMBER
A1-3226-T-1112S
HOUSING ASSEMBLY PARTS
ITEM
167
168
169
170
DESCRIPTION
Breather assembly
Stud - housing to carrier.
Plug - heat indicator
Plug - magnetic oil drain and fill
171
172
173
174
Plug - non-magnetic oil fill
Washer - carrier to housing
Silastic gasket - housing to carrier
Capscrew - carrier to housing
REMARKS
For aluminum or iron carriers
Female socket
Male socket
AXLE MODEL
All
All forward carriers
All
All
All
All
All
All other single and rear carriers
RR22145, RR21145
175
176
177
Nut - carrier to housing stud
Capscrew - brake line bracket
Gasket - brake line bracket
178
Washer - brake line bracket
179
Oil seal - wheel end
180
Cone - wheel bearing (inner)
181
Cup - wheel bearing (inner)
182
Cup - wheel bearing (outer)
183
Cone - wheel bearing (outer)
184
Nut - wheel bearing (inner)
185, 185A Lock washer and tanged lock washer
186
Nut - wheel bearing (outer)
Must purchase kit which includes
both items
All
All others
RS16140, RS17140, RS19145,
RS21145
All others
RS16140, RS17140, RS19145,
RS21145
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
"L" wheel end
"R" wheel end
QTY
1
2
1
1
1
1
12
1
3
7
8
4
9
4
2
2
2
4
PART NUMBER
A-1199-W-4053
4-X-1921
P-28-S
1250-E-473
1250-L-1286
P-212
1229-W-1557
2297-A-7021
10-X-1597
10-X-1594
10-X-1594
S-21020A-2
10-X-1594
S-21016-2
N-110-1
S-258-2
2208-P-536
2208-P-536
2
4
1229-E-1669
1229-E-1669
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
A-1205-W-1349
A-1205-Q-2487
47686
594A
47620
592A
39520
572
39590
580
1227-Z-1040
1227-W-517
KIT 2761
1229-F-4634S
1227-E-1045
1227-R-330
21
AXLE SHAFT SETS FOR 140, 141, 143, 144 & 145 SERIES AXLES
LEFT HAND
RIGHT HAND
RS-16-140 Single Axle
3202-G-9601
3202-J-9604
3202-X-9046
3202-Y-9047
3202-C-9597
3202-E-9599
3202-X-9046
3202-Y-9047
3202-B-9050
3202-C-9051
3202-Y-9281 (15) 3202-Z-9282 (15) (19)
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-S-9483
3202-T-9484
3202-H-9628
3202-K-9631
3202-S-9041
3202-U-9043
3202-Q-9117
3202-S-9119
3202-F-9340
3202-H-9342
3202-S-9483
3202-U-9485
3202-Q-9845
3202-S-9847
RIGHT HAND
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-S-9483
3202-T-9484
3202-H-9628
3202-K-9631
3202-S-9041
3202-U-9043
3202-Q-9117
3202-S-9119
3202-F-9340
3202-H-9342
3202-S-9483
3202-U-9485
3202-Q-9845
3202-S-9847
(16)
(16)
(16)
(16)
(16)
RD-17-140 Forward Axle of RT-34-140 Tandem
3202-Y-9047
3202-X-9046
3202-E-9599
3202-C-9597
(16)
(16)
(16)
(16)
(16)
3202-X-9046
3202-Y-9047
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-S-9483
3202-T-9484
3202-H-9628
3202-K-9631
3202-S-9041
3202-U-9043
3202-Q-9117
3202-S-9119
3202-F-9340
3202-H-9342
3202-S-9483
3202-U-9485
3202-Q-9845
3202-S-9847
LEFT HAND
(16)
(16)
(16)
(16)
(16)
RR-17-140 Rear Axle of RT-34-140 Tandem
3202-X-9046
3202-Y-9047
3202-C-9597
3202-E-9599
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-Y-9463
3202-W-9461
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
3202-K-9631
3202-H-9628
3206-S-1345 (17) 3206-Q-1343 (17)
3206-U-1347 (17) 3206-T-1346 (17)
3206-Y-1351 (17) 3206-W-1349 (17)
3206-A-1353 (17) 3206-Z-1352 (17)
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
3202-R-9638 (16) 3202-W-9461
3202-X-9046
3202-Y-9047
3202-C-9597
3202-E-9599
(15) These shafts are for original design 1.85"-36 spline.
(16) This shaft has longer splines that engage the differential lock.
(17) Not for use w ith main diff. lock or No-SPIN units.
(19) No longer available.
22
LEFT HAND
RIGHT HAND
RP-17-144 Fwd Axle of RT-34-144 Tandem (w/Pump)
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
3202-K-9631
3202-H-9628
3206-S-1345 (17) 3206-Q-1343 (17)
3206-U-1347 (17) 3206-T-1346 (17)
3206-Y-1351 (17) 3206-W-1349 (17)
3206-A-1353 (17) 3206-Z-1352 (17)
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
3202-S-9613 (16) 3202-N-9608
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-W-9461
3202-Y-9463
3202-S-9483
3202-T-9484
3202-N-9608
3202-Q-9611
3202-W-9617
3202-U-9615
3202-H-9628
3202-K-9631
3206-Q-1343 (17) 3206-S-1345 (17)
3206-T-1346 (17) 3206-U-1347 (17)
3206-W-1349 (17) 3206-Y-1351 (17)
3206-Z-1352 (17) 3206-A-1353 (17)
3202-S-9041
3202-U-9043 (16)
3202-Q-9117
3202-S-9119 (16)
3202-F-9340
3202-H-9342 (16)
3202-S-9483
3202-U-9485 (16)
3202-W-9461
3202-R-9638 (16)
LEFT HAND
RIGHT HAND
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-Y-9463
3202-W-9461
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
3202-K-9631
3202-H-9628
3206-S-1345 (17) 3206-Q-1343 (17)
3206-U-1347 (17) 3206-T-1346 (17)
3206-Y-1351 (17) 3206-W-1349 (17)
3206-A-1353 (17) 3206-Z-1352 (17)
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
3202-R-9638 (16) 3202-W-9461
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
3202-K-9631
3202-H-9628
3206-S-1345 (17) 3206-Q-1343 (17)
3206-U-1347 (17) 3206-T-1346 (17)
3206-Y-1351 (17) 3206-W-1349 (17)
3206-A-1353 (17) 3206-Z-1352 (17)
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
3202-S-9613 (16) 3202-N-9608
3202-Y-9047
3202-X-9046
3202-E-9599
3202-C-9597
3202-X-9046
3202-Y-9047
3202-C-9597
3202-E-9599
23
LEFT HAND
RIGHT HAND
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-W-9461
3202-Y-9463
3202-S-9483
3202-T-9484
3202-N-9608
3202-Q-9611
3202-W-9617
3202-U-9615
3202-H-9628
3202-K-9631
3206-Q-1343 (17) 3206-S-1345 (17)
3206-T-1346 (17) 3206-U-1347 (17)
3206-W-1349 (17) 3206-Y-1351 (17)
3206-Z-1352 (17) 3206-A-1353 (17)
3202-S-9041
3202-U-9043 (16)
3202-Q-9117
3202-S-9119 (16)
3202-F-9340
3202-H-9342 (16)
3202-S-9483
3202-U-9485 (16)
3202-W-9461
3202-R-9638 (16)
MD-20-143 Forward Axle of MT-40-143 Tandem
3202-S-9483
3202-U-9485
3206-T-1346
3206-U-1347
3206-W-1349
3206-Y-1351
3206-C-1563
3206-X-1740
3206-F-1748
3206-G-1749
3206-C-1823
3206-D-1824
3206-M-1885
3206-P-1888
LEFT HAND
RIGHT HAND
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-S-9483
3202-T-9484
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-Y-9463
3202-W-9461
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
3202-K-9631
3202-H-9628
3206-S-1345 (17) 3206-Q-1343 (17)
3206-U-1347 (17) 3206-T-1346 (17)
3206-Y-1351 (17) 3206-W-1349 (17)
3206-A-1353 (17) 3206-Z-1352 (17)
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
3202-R-9638 (16) 3202-W-9461
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-S-9041
MP-20-143 Forward Axle of MT-40-143 Tandem (w/Pump) 3202-T-9042
3206-W-1349
3206-Y-1351
3202-T-9484
3202-S-9483
3202-Q-9611
3202-N-9608
3202-U-9615
3202-W-9617
MR-20-143 Rear Axle of MT-40-143 Tandem
3206-T-1346
3206-U-1347
3202-K-9631
3202-H-9628
3206-W-1349
3206-Y-1351
3206-S-1345 (17) 3206-Q-1343 (17)
3206-C-1563
3206-X-1740
3206-U-1347 (17) 3206-T-1346 (17)
3206-F-1748
3206-G-1749
3206-Y-1351 (17) 3206-W-1349 (17)
3206-C-1823
3206-D-1824
3206-A-1353 (17) 3206-Z-1352 (17)
3206-M-1885
3206-P-1888
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-H-9342 (16) 3202-F-9340
3202-R-9118
3202-Q-9117
3202-U-9485 (16) 3202-S-9483
3202-G-9341
3202-F-9340
3202-S-9613 (16) 3202-N-9608
3202-T-9042
3202-S-9041
3202-T-9484
3202-S-9483
24
LEFT HAND
RIGHT HAND
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-S-9041
3202-T-9042
3202-W-9461
3202-Y-9463
3202-S-9483
3202-T-9484
3202-N-9608
3202-Q-9611
3202-W-9617
3202-U-9615
3202-H-9628
3202-K-9631
3206-Q-1343 (17) 3206-S-1345 (17)
3206-T-1346 (17) 3206-U-1347 (17)
3206-W-1349 (17) 3206-Y-1351 (17)
3206-Z-1352 (17) 3206-A-1353 (17)
3202-S-9041
3202-U-9043 (16)
3202-Q-9117
3202-S-9119 (16)
3202-F-9340
3202-H-9342 (16)
3202-S-9483
3202-U-9485 (16)
3202-W-9461
3202-R-9638 (16)
LEFT HAND
RIGHT HAND
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-T-9484
3202-S-9483
3202-U-9043 (16) 3202-S-9041
3202-H-9342 (16) 3202-F-9340
3202-U-9485 (16) 3202-S-9483
RP-22-145 Forward Axle of RT-44-145 Tandem (w/Pump)
3202-R-9118
3202-Q-9117
3202-G-9341
3202-F-9340
3202-T-9042
3202-S-9041
3202-T-9484
3202-S-9483
3202-U-9043 (16) 3202-S-9041
3202-S-9119 (16) 3202-Q-9117
3202-U-9485 (16) 3202-S-9483
3202-S-9041
3202-T-9042
3202-Q-9117
3202-R-9118
3202-F-9340
3202-G-9341
3202-T-9484
RP-20-146 Forward Axle of RT-40-146 Tandem (w/Pump) 3202-S-9483
3202-R-9118
3202-Q-9117
3202-S-9041
3202-U-9043 (16)
3202-F-9340
3202-H-9342 (16)
3202-S-9483
3202-U-9485 (16)
3202-Q-9117
3202-R-9118
3202-Q-9117
3202-S-9119 (16)
3202-R-9118
3202-Q-9117
25
AXLE SHAFTS
Part Number
3202-G-9601
3202-J-9604
3202-B-9050
3202-Y-9281
3202-C-9051
3206-F-1748
3206-M-1885
3206-Z-1352 16
3206-W-1349
3202-C-9597
3202-X-9046
3206-T-1346
3206-Q-1343
3206-G-1749
3206-P-1888
3206-A-1353
3206-Y-1351
3202-E-9599
3202-Y-9047
3206-U-1347
3206-S-1345
3202-Q-9845
3202-S-9847
3206-C-1563
3206-C-1823
3202-F-9340
3202-Q-9117
3202-S-9483
3202-S-9041
3202-H-9628
3202-W-9617
3202-W-9461
3202-N-9608
3206-X-1740
3206-D-1824
3202-K-9631
3202-G-9341
3202-R-9118
3202-X-9488
3202-H-9342
3202-S-9119
3202-U-9043
3202-T-9484
3202-T-9042
3202-U-9485
3202-U-9615
3202-Y-9619
3202-Y-9463
3202-Q-9611
3202-R-9638
3202-S-9613
Body Dia.
1.62"
1.62"
1.75"
1.75"
1.75"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
1.88"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
2.00"
26
Length
37.51"
43.54"
37.87"
38.21"
43.89"
35.75"
35.86"
37.06"
37.06"
37.45"
37.63"
37.92"
37.92"
41.70"
41.75"
43.01"
43.01"
43.36"
43.54"
43.87"
43.87"
34.76"
35.60"
35.70"
35.73"
37.18"
37.18"
38.04"
38.04"
38.14"
40.00"
40.73"
40.85"
41.49"
41.68"
42.43"
43.13"
43.13"
43.13"
43.13"
43.13"
43.80"
43.99"
43.99"
44.00"
45.94"
45.94"
46.80"
46.80"
46.80"
46.80"
Spline Size
2.00"-39
2.00"-39
1.85"-36
1.85"-36
1.85"-36
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.00"-39
2.00"-39
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.00"-39
2.00"-39
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
2.10"-41
Spline Len.
2.88"
2.88"
2.60"
2.60"
2.60"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
8.12"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
2.88"
8.12"
8.12"
8.12"
8.12"
2.88"
2.88"
8.12"
2.88"
8.12"
2.88"
2.88"
8.12"
8.12"
Flange Dia.
6.25"
6.25"
6.25"
6.25"
6.25"
8.38"
7.93"
8.38"
8.38"
6.63"
6.25"
8.38"
8.38"
8.38"
7.93"
8.38"
8.38"
6.43"
6.25"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
8.38"
No. of Holes
12
12
12
12
12
8
12
8
8
8
12
8
8
8
12
8
8
8
12
8
8
8
8
8
12
8
8
8
8
8
8
8
8
8
12
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
Hole Size
.50"
.50"
.50"
.50"
.50"
.73"
.59"
.73"
.78"
.63"
.50"
.64"
.73"
.73"
.59"
.73"
.78"
.63"
.50"
.64"
.73"
.73"
.73"
.73"
.59"
.73"
.78"
.64"
.73"
.73"
.78"
.64"
.73"
.73"
.59"
.73"
.73"
.78"
.64"
.73"
.78"
.73"
.64"
.73"
.64"
.78"
.78"
.64"
.73"
.64"
.73"
Bolt Circle
5.25"
5.25"
5.25"
5.25"
5.25"
7.00"
6.75"
7.00"
7.00"
5.50"
5.25"
7.00"
7.00"
7.00"
6.75"
7.00"
7.00"
5.50"
5.25"
7.00"
7.00"
7.00"
7.00"
7.00"
6.75"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
6.75"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
7.00"
Hole Type
Taper
Taper
Taper
Taper
Taper
Taper
Taper
Taper
Straight
Straight
Taper
Straight
Taper
Taper
Taper
Taper
Straight
Straight
Taper
Straight
Taper
Taper
Taper
Taper
Taper
Taper
Straight
Straight
Taper
Taper
Straight
Straight
Taper
Taper
Taper
Taper
Taper
Straight
Straight
Taper
Straight
Taper
Straight
Taper
Straight
Straight
Straight
Straight
Taper
Straight
Taper
ROUND BEARING TYPE YOKES
Axle Model
(Location)
RS-16-140
RS-17-140
(Input)
RS-16-141
RS-17-141
RS-17-144
RS-19-144
RS-19-145
RS-21-145
(Input)
RT-34-140
RT-40-140
MT-40-143
RT-34-144
RT-38-144
RT-34-145
RT-40-145
RT-44-145
(Fwd. Input)
(Fwd. Output)
(Original Design
140 Tandem)
(Fwd. Output)
(All Others)
(Rear Input)
Center to
End
4.88"
Spline
Length
2.25"
Hub Dia.
2.50"
5.54"
6.22"
5.19"
5.16"
6.25"
5.19"
2.31"
3.00"
5.54"
6.22"
5.19"
5.16"
6.25"
5.19"
4.94"
5.38"
5.06"
5.16"
6.03"
5.44"
5.97"
4.88"
5.19"
5.16"
6.25"
5.54"
6.22"
5.19"
5.16"
6.25"
2.31"
3.00"
2.32"
3.25"
2.25"
2.50"
2.31"
3.00"
2.31"
3.00"
Yoke
Bearing Cap Dimension Spline Size Dia. Part Number
Diameter
Across Ears
No. Teeth
1.88"
5.31"
1.75"-34
16N-4-5621X
1.94"
6.09"
17NYS28-43A
1.88"
1.88"
1.94"
1.94"
1.94"
1.94"
5.31"
5.31"
7.00"
6.09"
6.09"
7.55"
2.00"-39
1.88"
1.88"
1.94"
1.94"
1.94"
1.94"
1.88"
1.94"
1.94"
1.94"
1.88"
1.88"
1.94"
1.94"
1.94"
1.94"
1.94"
1.88"
1.88"
1.94"
1.94"
1.94"
5.31"
5.31"
7.00"
6.09"
6.09"
7.55"
5.31"
6.09"
7.00"
7.55"
5.31"
5.31"
6.09"
6.09"
7.00"
6.09"
6.09"
5.31"
5.31"
7.00"
6.09"
6.09"
2.00"-39
2.38"-46
1.75"-34
2.00"-39
2.00"-39
Production Part
Number
A-3280-Q-7115
A-3260-H-8
16N-4-6281X
16N-4-6291X
176NYS32-3A2
17NYS32-100A
17N-4-6391X
18NYS32-12A3
A-3260-G-111
A-3260-H-112
A2-3260-K-115
16N-4-6281X
16N-4-6291X
176N-4-541X
17N-4-6411X
17NYS32-99A
18NYS32-12A3
16NYS38-8A
17N-4-7181X
176NYS38-14A
18NYS38-27A
16N-4-6251
16N-4-6261
17N-4-6321
17N-4-6331
176N-4-531
17NYS32-100
17NYS32-99
16N-4-6281X
16N-4-6291X
176NYS32-3A2
17NYS32-100A
17N-4-6391X
A-3260-G-111
A-3260-H-112
A-3260-K-115
A-3260-Q-121
A1-3260-P-120
A3-3260-L-116
A3-3260-L-116
A-3260-T-1034
A-3260-U-359
A-3260-V-360
3260-U-125
3260-T-124
3260-W-127
3260-V-126
3260-K-115
A-3260-G-111
A-3260-H-112
A2-3260-K-115
A1-3260-P-120
27
WING BEARING TYPE YOKES
Axle Model
(Location)
RS-16-140
RS-17-140
(Input)
Spline
Length
2.25"
Hub
Dia.
2.50"
2.31"
3.00"
2.31"
3.00"
4.22"
2.32"
3.81"
4.25"
4.44"
(All Others)
(Rear Input)
RS-16-141
RS-17-141
RS-19-145
RS-21-145
(Input)
(Fwd. Input)
RT-34-140
RT-34-145
RT-40-145
RT-44-145
(Fwd. Output)
(Original Design
140 Tandem)
Part Number
58WBYS28-182A
58WBYS28-186A
62NYS28-160A
62NYS28-201A
62NYS28-202A
72NYS28-166A
58WBYS32-47A 16
72NYS32-244A
82NYS32-74A1
92NYS32-25A1
92NYS32-26A
72NYS32-244A1
92NYS32-25A
Production Part
Number
A-3260-L-38
A-3260-K-63
A-3260-Z-52
A-3260-Q-1135
A-3260-S-1137
A-3260-F-32
A-3260-S-253
A-3260-S-123
A1-3260-M-117
A1-3260-N-118
A-3260-B-132
A1-3260-S-123
A-3260-N-118
TH
92NYS38-73A
A-3260-K-1129
2.00"-39
TH
TH
DR
72NYS32-244
92NYS32-25
92NYS32-26
3260-S-123
3260-N-118
3260-B-132
.63"
.63"
.63"
.63"
1.75"-34
TH
DR
TH
DR
72NYS28-176
72NYS28-177
72NYS28-179
92NYS28-5
3260-X-128
3260-Y-129
3260-X-154
3260-A-131
.63"
.63"
.63"
.63"
.63"
2.00"-39
TH
TH
TH
TH
DR
58WBYS32-47A
72NYS32-244A
82NYS32-74A1
92NYS32-25A1
92NYS32-26A
A-3260-S-253
A-3260-S-123
A1-3260-M-117
A1-3260-N-118
A-3260-B-132
Keyway
Width
.63"
.63"
.56"
.56"
.56"
.63"
.63"
.63"
.63"
.63"
.63"
.63"
.63"
3.25"
8.25"
.63"
2.38"-46
2.31"
3.00"
5.84"
8.25"
8.25"
.63"
.63"
.63"
3.63"
4.69"
4.25"
4.25"
2.25"
2.50"
5.84"
5.84"
5.84"
8.25"
3.81"
3.81"
3.88"
4.25"
4.44"
2.31"
3.00"
5.31"
5.84"
8.13"
8.25"
8.25"
Face to End
3.88"
3.88"
3.31"
3.94"
3.94"
3.75"
3.81"
3.81"
3.88"
4.25"
4.44"
3.81"
4.25"
28
Spline Size
Dia. - No.
Teeth
1.75"-34
Pilot
Diameter
5.31"
5.31"
5.53"
5.53"
5.53"
5.84"
5.31"
5.84"
8.13"
8.25"
8.25"
5.84"
8.25"
2.00"-39
2.00"-39
Hole Type
TH
TH
TH
DR
TH
TH
TH
TH
TH
TH
DR
TH
TH
EASY SERVICE (STRAP) TYPE YOKES
Axle Model
(Location)
RS-16-140
RS-17-140
(Input)
RS-16-141
RS-17-141
RS-17-144
RS-19-144
RS-19-145
RS-21-145
(Input)
RT-34-140
RT-40-140
RT-34-144
RT-38-144
RT-34-145
RT-40-145
RT-44-145
(Fwd. Input)
(Fwd. Output)
(New Design
Only)
(Rear Input)
MT-40-143
Forward Input
Forward Output
Rear Input
Center to
End
4.19"
4.47"
4.69"
4.66"
4.88"
4.88"
4.75"
4.75"
4.75"
5.54"
6.22"
4.88"
5.19"
6.25"
5.16"
5.19"
4.38"
4.88"
5.19"
6.25"
5.16"
5.19"
4.94"
5.38"
5.06"
5.16"
4.75"
5.54"
6.22"
6.25"
4.75"
4.75"
4.75"
5.54"
6.22"
4.88"
5.19"
6.25"
5.16"
5.19"
5.10"
5.32"
5.09"
5.09"
6.39"
Spline
Length
2.25"
2.31"
2.31"
Hub
Dia.
2.50"
3.00"
3.00"
2.32"
3.25"
2.31"
3.00"
2.31"
3.00"
2.32"
3.25"
2.31"
2.31"
3.00"
3.00"
Bearing Cap
Diameter
1.19"
1.38"
1.38"
1.38"
1.88"
1.94"
1.38"
1.38"
1.38"
1.88"
1.88"
1.88"
1.94"
1.94"
1.94"
1.94"
1.38"
1.88"
1.94"
1.94"
1.94"
1.94"
1.88"
1.94"
1.94"
1.94"
1.38"
1.88"
1.88"
1.94"
1.38"
1.38"
1.38"
1.88"
1.88"
1.88"
1.94"
1.94"
1.94"
1.94"
2.17"
2.36"
2.17"
2.17"
2.17"
Distance
Between
Nibbs
4.19"
4.19"
4.97"
4.97"
5.31"
6.19"
4.19"
4.97"
4.97"
5.31"
5.31"
5.31"
7.09"
6.19"
6.19"
7.63"
4.97"
5.31"
7.09"
6.19"
6.19"
7.63"
5.31"
6.19"
7.09"
7.64"
4.97"
5.31"
5.31"
6.19"
4.19"
4.97"
4.97"
5.31"
5.31"
5.31"
7.09"
6.19"
6.19"
7.63"
6.46"
6.41"
6.46"
6.46"
6.46"
Spline Size
Dia. - No. Teeth Hole Type
1.75"-34
DR
DR
DR
DR
TH
TH
2.00"-39
TH
DR
TH
TH
TH
TH
TH
TH
TH
TH
2.00"-39
TH
TH
TH
TH
TH
TH
2.38"-46
TH
TH
TH
TH
2.00"-39
DR
TH
TH
TH
2.00"-39
TH
DR
TH
TH
TH
TH
TH
TH
TH
TH
2.38"-46
TH
TH
2.00"-39
2.00"-39
Part Number
141DYS28A
148DYS28A
155DYS28-1A
155NYS28-5A
16TYS28-13A
17TYS28-57A
148TYS32-4A
155DYS32-6A
155TYS32-6A
16TYS32-32A
16TYS32-76A
16TYS32-86A
176TYS32-3A1
17TYS32-99A
17N-4-7631-1X
18TYS32-12A1
155TYS32-2A
16N-4-6431-1X
176N-4-541-1X
17TYS32-95A1
17N-4-7641-1X
18N-4-3381-1X
16N-4-7341-1X
17TYS38-76A
176TYS38-27A
18TYS38-27A
155DYS32-6
16N-4-6271-1
16TYS32-76
17TYS32-99
148TYS32-4A
155DYS32-6A
155TYS32-6A
16TYS32-32A
16TYS32-76A
16TYS32-86A
176TYS32-3A1
17TYS32-99A
17N-4-7631-1X
18TYS32-12A1
170TYS38-4A
250TYS38-2A
170TYS32-2
170TYS32-2A
170TYS32-1A
Production Part
Number
A-3280-J-8070
A-3260-N-248
A-3260-B-2
A-3260-J-1232
A-3260-V-1296
A-3260-S-1241
A-3260-F-318
A-3260-A-1353
A-3260-F-1280
A-3260-D-1668
A1-3260-S-1267
A-3260-R-1292
A1-3260-N-1262
A-3260-W-1037
A-3260-S-1267
A1-3260-R-1292
A-3260-N-1262
A-3260-L-1234
3260-F-318
3260-F-1280
3260-D-1668
A-3260-S-1241
A-3260-F-318
A-3260-A-1353
A-3260-F-1280
A-3260-D-1668
A1-3260-S-1267
A-3260-R-1292
A1-3260-N-1262
A-3260-F-1826
A-3260-H-1828
3260-G-1827
A-3260-G-1827
A-3260-J-1830
29
RPL SERIES YOKES
Axle Model
MT-40-143
(Fwd. Input)
(Fwd. Output)
(Rear Input)
30
Face to End
4.90"
4.73"
5.95"
5.95"
Hub Dia.
3.25"
Spline Length
2.32"
3.00"
3.00”
2.31"
2.31"
Yoke Dimension
Across Nibbs
7.06"
8.38"
7.06"
7.06"
Spline Size Dia. - No.
Teeth
Part Number
2.38"-46
20WYS38-4A
25WYS38-13A
2.00"-39
20WYS32-2
2.00"-39
20WYS32-2A
COMPANION FLANGES
Axle Model
(Location)
Face to End
RS-16-140
2.84"
RS-17-140
(Input)
2.94"
RS-16-141
3.38"
RS-17-141
3.31"
RS-17-144
RS-19-144
RS-19-145
RS-21-145
(Input)
(Fwd. Input)
3.38"
RT-34-140
3.31"
RT-40-140
2.62"
RT-34-144
3.27"
RT-38-144
RT-34-145
RT-40-145
RT-44-145
(Fwd. Output)
(Original Design
2.94"
140 Tandem)
(All Others)
3.31"
(Rear Input)
3.38"
3.31"
Spline
Length
2.25"
Hub
Dia.
2.50"
2.31"
3.00"
2.31"
Pilot Dia.
M=Male
F=Female
F-3.75"
Hole
Size
.51"
Bolt
Circle
Dia.
4.75"
.38"
.38"
.41"
7.25"
6.13"
7.25"
F-7.75"
F-6.63"
F-7.75"
Flange Dia.
Square
Flange
8.00"
6.88"
8.00"
3.00"
F-6.63"
F-7.75"
F-7.75"
F-7.75"
6.88"
8.00"
8.00"
8.00"
.38"
.41"
.44"
.40"
6.13"
7.25"
7.25"
7.25"
2.25"
2.50"
F-6.63"
6.88"
.38"
2.31"
2.31"
3.00"
3.00"
F-7.75"
F-6.63"
F-7.75"
8.00"
6.88"
8.00"
.41"
.38"
.41"
Spline Size
Part Number
Dia. - No. Teeth
1.75"-34
2WCS28-73A
Production Part
Number
A-3260-D-4
5WCS28-54A
3WCS32-73A1
5WCS32-86A2
A-3260-G-7
A1-3260-V-152
A2-3260-F-136
2.00"-39
3WCS32-73A
5WCS32-86A
5WCS32-89A
5WCS32-94A
A-3260-V-152
A-3260-F-136
A-3260-E-213
A-3260-M-325
6.13"
1.75"-34
3WCS28-93
3260-J-10
7.25"
6.13"
7.25"
2.00"-39
2.00"-39
5WCS32-86
3WCS32-73A1
5WCS32-86A2
3260-F-136
A1-3260-V-152
A2-3260-F-136
2.00"-39
31
AXLE MODEL TO CARRIER TO KIT CROSS REFERENCE
AXLE
MODEL
RS-16-140
BASE
CARRIER
3200-M-1547 Standard
3200-L-1676 Standard
RS-16-141
RS-17-140
KIT
KIT DESCRIPTION
Carrier overhaul
NUMBER
KIT RS-17-140
Carrier bearings and oil seals
KIT 4345
Pinion bearing cage shims
KIT 2313
Pinion bearing spacers
KIT 2321
Main differential nest w ith spider
KIT 2308
Main differential nest w ithout spider
KIT 2309
Ring gear to differential case bolts, nuts and w ashers
KIT 2317
KIT 4350
KIT 2313
KIT 2321
KIT 2389
KIT 2431
KIT 2317
KIT 4400
3200-Q-1785 Standard
KIT 2313
3200-S-1865 Standard
KIT 2322
KIT 2389
KIT 2431
KIT 2317
Carrier and cap upgrade to thrust screw version
KIT 2756
See kits for same base carrier of RS-16-140
_
RS-17-141
3200-M-1547 NoSpin diff.
See kits for same base carrier of RS-16-140 except
3200-L-1676 NoSpin diff.
KIT RS-17-140, KIT 2308, KIT 2309, KIT 2389 and
3200-Q-1785 NoSpin diff.
KIT 2431 cannot be used as they apply to standard
3200-S-1865 NoSpin diff.
differential nest type carriers.
_
_
RD-17-145
3200-G-1645 Standard
Carrier bearings and oil seals (Prior to 11/93)
KIT 4395
3200-T-1814 Standard
Carrier bearings and oil seals (After 11/93)
KIT 4396
3200-B-1978 Standard
Input brg cage shims & pinion inner brg cup shims
KIT 2429
3200-G-1645 NoSpin diff.
32
KIT 2396
KIT 2389
KIT 2431
KIT 2317
Output bearing snap ring spacers
KIT 576
Inter-axle differential case and nest (Prior to 10/98)
KIT 2488
Inter-axle differential case and nest (After 10/98)
KIT 2522
Helical gears
KIT 2482
Carrier and cap upgrade to thrust screw
KIT 2751
Carrier, cap and IAD shift cylinder upgrade
KIT 2706
See kits for standard carrier except
3200-T-1814 NoSpin diff.
KIT 2389 and KIT 2431 w hich apply to standard
3200-B-1978 NoSpin diff.
differential type carriers.
_
AXLE
MODEL
RP-17-145
RR-17-145
BASE
KIT
CARRIER
KIT DESCRIPTION
NUMBER
3200-X-1662 Pump
KIT 4395
3200-V-1816 Pump
KIT 4396
3200-H-1984 Pump
KIT 2429
KIT 2396
KIT 2389
KIT 2431
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
Input shaft and pump upgrade
KIT 2835
KIT 2753
3200-X-1662 NoSpin diff.
See kits for carrier w ith pump except
3200-V-1816 NoSpin diff.
3200-H-1984 NoSpin diff.
_
_
RS-19-145
_
RD-20-140
RR-20-140
See kits for same base carrier of RS-16-141 except
3200-Q-1785 NoSpin diff.
3200-S-1865 NoSpin diff.
Carrier overhaul
_
KIT RD-20140NL
KIT 4355
Carrier bearings and oils seals (updated input shaft)
KIT 4356
KIT 2429
KIT 2396
KIT 2310
KIT 2311
KIT 2317
KIT 530
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2751
KIT 2706
Carrier overhaul
KIT RS-145 1676
KIT 4400
KIT 2313
KIT 2322
KIT 2310
KIT 2311
KIT 2317
KIT 2756
33
AXLE
MODEL
MR-20-143
MD-20-143
BASE
KIT
CARRIER
3200-W-2051 Standard
KIT DESCRIPTION
Pinion bearing shims
NUMBER
KIT 1647
Pinion bearing split spacers
KIT 2541
KIT 4461
KIT 2310
KIT 2311
KIT 2317
Carrier overhaul
KIT RD-20145NL
RD-17-144
KIT 4395
RD-19-144
3200-F-1852 Standard
KIT 4396
RD-20-145
3200-N-1860 Standard
KIT 2429
KIT 2396
KIT 2310
3200-C-1979 Standard
KIT 2311
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2751
KIT 2706
3200-M-1677 Diff. lock
Same as RD-20-145 standard except for the follow ing kits:
3200-U-1815 Diff. lock
Carrier overhaul
KIT RD-20145DL
3200-R-1890 Diff. lock
KIT 4405
3200-E-1903 Diff. lock
KIT 4406
3200-E-1981 Diff. lock
Shift kit (bolt on style main diff. lock)
KIT 2413
Shift kit (screw on style main diff. lock)
KIT 2662
KIT RD-20145DL
MP-20-143
3200-L-1624 Pump w /lock
Carrier overhaul
RP-17-144
3200-W-1817 Pump w /lock
KIT 4405
RP-19-144
3200-P-1888 Pump w /lock
KIT 4406
RP-20-145
3200-D-1902 Pump w /lock
KIT 2429
3200-K-1987 Pump w /lock
KIT 2396
KIT 2310
34
KIT 2311
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2754
KIT 2705
Input shaft and pump
KIT 2623
KIT 2413
KIT 2662
AXLE
MODEL
MP-20-143
BASE
KIT
CARRIER
3200-X-1662 Pump
KIT DESCRIPTION
Carrier overhaul
NUMBER
KIT RD-20145NL
RP-17-144
3200-V-1816 Pump
KIT 4395
RP-19-144
3200-G-1853 Pump
KIT 4396
RP-20-145
3200-H-1984 Pump
KIT 2429
KIT 2396
KIT 2310
(cont)
3200-X-1662 NoSpin diff.
KIT 2311
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2623
KIT 2753
Same as pump w ith no lock w ith the follow ing
3200-V-1816 NoSpin diff.
exceptions: KIT RD20145NL, KIT 2310 and KIT 2311
3200-H-1984 NoSpin diff.
apply only to standard differential carriers, not used
WITH PUMP
w ith NoSpin.
RR-17-144
Carrier overhaul
RR-19-144
KIT 4400
RR-20-145
3200-D-1850 Standard
Pinion brg cage shims (3200-L-1676 & 3200-M-1885)
KIT 2313
3200-E-1851 Standard
Pinion bearing cage shims (all others)
KIT 1568
KIT 2322
KIT 2310
Same carriers as above
but w ith No-Spin diff.
KIT RS-145 1676
KIT 2311
KIT 2317
KIT 2756
Same as above w ith the follow ing exceptions:
KIT RS-145 1676, KIT 2310 and KIT 2311 apply only
to standard differential carriers, not used w ith NoSpin.
3200-X-1558 Diff. lock
Carrier overhaul
KIT RS-145 1547
3200-G-1879 Diff. lock
KIT 4390
KIT 2313
KIT 2322
KIT 2310
RS-17-144
RS-19-144
RS-21-145
KIT 2311
KIT 2317
Diff. lock actuator repair kit (bolt-on version)
KIT 2405
Diff. lock actuator repair kit (screw -in version)
KIT 2662
KIT 2755
See kits for same base carriers of RR-20-145
3200-E-1851 Standard
See kits for same base carrier of RR-20-145
3200-X-1558 Diff. lock
See kits for same base carriers of RR-20-145
35
AXLE
MODEL
RS-17-144
BASE
KIT
CARRIER
3200-R-1500 Diff. lock
KIT DESCRIPTION
Carrier overhaul
NUMBER
KIT RS-145 1500
RS-19-144
KIT 4385
RS-21-145
KIT 2313
KIT 2322
KIT 2310
(cont)
RD-22-145
36
KIT 2311
KIT 2317
Diff. lock actuator repair kit (bolt-on)
KIT 2405
KIT 4395
KIT 4396
KIT 2429
3200-C-1875 Diff. lock
RP-22-145
KIT 2396
KIT 2696
KIT 2703
Main differential case upgrade 3.42 thru 4.11
KIT 2665
Main differential case upgrade 4.30 and slow er
KIT 2647
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2751
KIT 2706
Same as RD-20-145 standard except for the follow ing kits:
KIT 4405
3200-F-1982 Diff. lock
KIT 4406
KIT 2704
KIT 2664
KIT 2648
KIT 2413
KIT 2691
KIT 2752
3200-E-1877 Pump w /lock
KIT 4405
3200-H-1906 Pump w /lock
KIT 4406
3200-M-1911 Pump w /lock
KIT 2429
3200-T-1918 Pump w /lock
KIT 2396
KIT 2696
KIT 2703
KIT 2664
KIT 2648
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2705
Input shaft and pump
KIT 2623
KIT 2413
KIT 2691
KIT 2754
AXLE
MODEL
RP-22-145
(cont)
BASE
KIT
CARRIER
KIT DESCRIPTION
NUMBER
3200-D-1876 Pump
KIT 4395
3200-P-1914 Pump
KIT 4396
3200-J-1986 Pump
KIT 2429
KIT 2396
KIT 2696
KIT 2703
KIT 2665
KIT 2647
KIT 2317
KIT 576
KIT 2488
KIT 2522
Helical gears
KIT 2482
KIT 2623
KIT 2753
KIT RD20145NL, KIT 2310 and KIT 2311 apply only to
3200-A-1873 Standard
KIT 4400
KIT 2313
standard differential carriers, not used w ith NoSpin.
RR-22-145
KIT 2322
KIT 2696
KIT 2703
KIT 2665
KIT 2647
KIT 2317
KIT 2756
KIT RS-145 1676, KIT 2310 and KIT 2311 apply only
to standard differential carriers, not used w ith NoSpin.
3200-F-1904 Diff. lock
KIT 4390
KIT 2313
KIT 2322
KIT 2696
KIT 2703
KIT 2664
KIT 2648
KIT 2317
Diff. lock actuator repair kit (bolt-on)
KIT 2405
KIT 2755
37
SERVICE KITS
KIT RD20140NL
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
KIT 2310
KIT 2396
KIT 2429
KIT 576
KIT 2488
40-X-1145
KIT 2637
KIT 4395
JM-511945
QTY.
DESCRIPTION
1
Main Diff. Kit with Spider
1
Spacer Kit
1
Shim Kit
1
Snap Ring Kit
1
IAD Kit
1
Nut
1
Input Nut and Washer Kit
1
Bearing & Seal Kit
1
Bearing Cone
REMARKS
Without diff. lock, old style welded IAD
RD-20-140
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
Spacer Kit
Shim Kit
Snap Ring Kit
IAD Kit
Nut
Bearing & Seal Kit
Bearing Cone
Lock Nut
Washer
Oil Seal Assembly
REMARKS
With diff. lock, old style welded IAD. Later
model bolted IAD carriers can use this kit.
RD-17-144, RD-19-144, RD-20-145,
RP-17-144, RP-19-144, RP-20-145
QTY.
1
1
1
1
1
1
2
1
1
1
1
1
DESCRIPTION
Spacer Kit
Shim Kit
Snap Ring Kit
IAD Kit
Nut
Bearing & Seal Kit
Bearing Cone
Lock Nut
Washer
Oil Seal Assembly
REMARKS
Without diff. lock, old style welded IAD. Later
model bolted IAD carriers can use this kit.
RD-17-144, RD-19-144, RD-20-145,
RP-17-144, RP-19-144, RP-20-145
KIT RD20145DL
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
KIT 2310
KIT 2396
KIT 2429
KIT 576
KIT 2488
40-X-1145
KIT 2637
KIT 4405
JM-511945
40-X-1233
1229-N-1730
A1-1205-X-2728
KIT RD20145NL
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NUMBER
KIT 2310
KIT 2396
KIT 2429
KIT 576
KIT 2488
40-X-1145
KIT 2637
KIT 4395
JM-511945
40-X-1233
1229-N-1730
A1-1205-X-2728
KIT RR22145 1873
ITEM
1
2
3
4
5
PART NUMBER
KIT 2696
KIT 2637
KIT 2322
KIT 1568
KIT 4400
QTY.
DESCRIPTION
1
1
1
Spacer Kit
1
Shim Kit
1
Bearing & Seal Kit
REMARKS
Less diff lock.
RR-22-145
KIT RS145 1500
ITEM
1
2
3
4
5
PART NUMBER
KIT 2310
KIT 2637
KIT 2322
KIT 2313
KIT 4385
QTY.
DESCRIPTION
1
1
1
Spacer Kit
1
Shim Kit
1
Bearing & Seal Kit
REMARKS
For 3200-R-1500 DCDL carriers.
RR-20-145, RS-21-145
QTY.
DESCRIPTION
1
1
1
Spacer Kit
1
Shim Kit
1
Bearing & Seal Kit
REMARKS
For DCDL carriers other than 3200-R-1500.
RR-17-144, RR-19-144, RR-20-145,
RS-17-144, RS-19-144, RS-21-145
KIT RS145 1547
ITEM
1
2
3
4
5
38
PART NUMBER
KIT 2310
KIT 2637
KIT 2322
KIT 2313
KIT 4390
SERVICE KITS
KIT RS145 1676
ITEM
1
2
3
4
5
6
PART NUMBER
KIT 2310
KIT 2637
KIT 2322
KIT 2313
KIT 4400
KIT 1568
QTY.
1
1
1
1
1
1
DESCRIPTION
Spacer Kit
Shim Kit
Bearing & Seal Kit
Shim Kit
REMARKS
Non-DCDL carriers.
RR-20-140, RR-20-145, RS-17-144, RS-19-144
KIT RS17140
ITEM
1
2
3
4
5
PART NUMBER
KIT 2308
KIT 2636
KIT 2321
KIT 2313
KIT 4345
QTY.
DESCRIPTION
1
1
Fastener Kit
1
Spacer Kit
1
Shim Kit
1
Bearing & Seal Kit
REMARKS
RS-16-140, RS-17-140
QTY.
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
Snap Ring - 3.94mm/.155 in.
REMARKS
Output shaft snap ring kit
RD-20-140
QTY.
1
1
1
1
1
1
1
1
1
1
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
Ring-Snap
QTY.
1
3
4
1
Shim - .075mm/.003 in.
Shim - .125mm/.005 in.
Shim - .250mm/.010 in.
Shim - .500mm/.020 in.
KIT 530
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
1229-A-2237
1229-B-2238
1229-C-2239
1229-D-2240
1229-E-2241
1229-F-2242
1229-G-2243
1229-H-2244
1229-J-2246
1229-K-2247
KIT 576
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
1229-P-2590
1229-Q-2591
1229-R-2592
1229-S-2593
1229-T-2594
1229-U-2595
1229-V-2596
1229-W-2597
1229-X-2598
1229-Y-2599
DESCRIPTION
REMARKS
Output shaft snap ring kit
MD-20-143, MP-20-143, RD-17-144,
RD-17-145, RD-19-144, RD-20-145,
RD-22-145, RP-17-144, RP-17-145,
RP-19-144, RP-20-145, RP-22-145
DESCRIPTION
REMARKS
3200-S-1865 or all single or rear/rear models
using pinion bearing shim OD 8.5"
140 Series
DESCRIPTION
REMARKS
For Amboid drive axle.
MR-20-143M, RD-17-144, RD-17-145,
RD-19-144, RD-19-145, RD-20-145,
RD-22-145, RP-17-144, RP-17-145,
RP-19-144, RP-19-145, RP-20-145, RP-22-145
KIT 1568
ITEM
1
2
3
4
PART NUMBER
2203-C-8115
2203-D-8116
2203-E-8117
2203-B-9804
KIT 1647
ITEM
PART NUMBER
1
2203-F-2788
2
2203-G-2789
3
2203-H-2790
QTY.
3
Shim - .075mm/.003 in.
2
Shim - .125mm/.005 in.
4
Shim - .250mm/.010 in.
KIT 2308
ITEM
1
2
3
4
5
PART NUMBER
2233-M-1027
2234-T-1086
3278-D-82
1229-Z-3172
1229-L-1026
QTY.
DESCRIPTION
4
Differential Pinion, Finished
2
Differential Side Gear, Finished
1
Differential Spider
2
Thrust Washer
4
Thrust Washer
REMARKS
With diff. spider (1.85"-36 spline side gear).
Original design.
RS-16-140, RS-17-140
39
SERVICE KITS
KIT 2309
ITEM
1
2
3
4
PART NUMBER
2233-M-1027
2234-T-1086
1229-Z-3172
1229-L-1026
QTY.
DESCRIPTION
4
2
2
Thrust Washer
4
Thrust Washer
REMARKS
Less diff. spider (1.85"-36 spline side gear).
Original design.
RS-16-140, RS-17-140
QTY.
DESCRIPTION
4
2
1
Differential Spider
2
Thrust Washer
4
Thrust Washer
REMARKS
MD-20-143, MP-20-143, MR-20-143,
RD/RP/RR-17-144, RD/RP/RR-19-144,
RD/RR-20-140, RD/RP/RR-20-145,
RS-17-144, RS-19-144, RS-21-145
QTY.
DESCRIPTION
4
Differential Pinion
2
2
Thrust Washer
4
Thrust Washer
REMARKS
MD/MP/MR-20-143, RD/RP/RR-17-144,
RD/RP/RR-19-144, RD/RR-20-140,
RD/RP/RR-20-145, RS-17-144, RS-19-144,
RS-21-145
QTY.
3
2
4
1
DESCRIPTION
REMARKS
3200-L-1676 or all single or rear/rear models
using pinion bearing shim OD 9.62".
140 Series
QTY.
12 Capscrew
12 Washer-Flat
12 Lock Nut
DESCRIPTION
REMARKS
Gear to case bolt kit (17.0 mm bolts
prior to 4-88). MD/MP/MR-20-143,
RD/RP/RR-17-144, RD/RP/RR-17-145,
RD/RP/RR-19-144, RD/RR-20-140,
RD/RP/RR-20-145, RD/RP/RR-22-145,
RS-16-140, RS-16-141, RS-17-140,
RS-17-141, RS-17-144, RS-17-145,
RS-19-144, RS-19-145, RS-21-145
QTY.
2
2
2
2
2
2
2
2
2
2
2
DESCRIPTION
Spacer - 8.35mm/.329 in.
REMARKS
RS-16-140, RS-17-140
QTY.
2
2
2
2
2
2
2
2
2
2
2
DESCRIPTION
REMARKS
RR-17-144, RR-17-145, RR-19-144,
RR-20-140, RR-20-145, RR-22-145,
RS-16-141, RS-17-141, RS-17-144,
RS-19-144, RS-19-145, RS-21-145
KIT 2310
ITEM
1
2
3
4
5
PART NUMBER
2233-J-1024
2234-U-1269
3278-S-305
1229-V-4624
1229-R-1032
KIT 2311
ITEM
1
2
3
4
PART NUMBER
2233-J-1024
2234-U-1269
1229-V-4624
1229-R-1032
KIT 2313
ITEM
1
2
3
4
PART NUMBER
2803-Q-2851
2803-R-2852
2803-S-2853
2803-T-2854
Shim - .075mm/.003 in.
Shim - .125mm/.005 in.
Shim - .250mm/.010 in.
Shim - .500mm/.020 in.
KIT 2317
ITEM
PART NUMBER
1
41-X-1216
2
1229-U-1503
3
40-X-1182
KIT 2321
ITEM
1
2
3
4
5
6
7
8
9
10
11
PART NUMBER
2203-V-9486
2203-W-9487
2203-X-9488
2203-Y-9489
2203-Z-9490
2203-A-9491
2203-B-9492
2203-C-9493
2203-D-9494
2203-E-9495
2203-F-9496
KIT 2322
ITEM
1
2
3
4
5
6
7
8
9
10
11
40
PART NUMBER
2203-J-9474
2203-K-9475
2203-L-9476
2203-M-9477
2203-N-9478
2203-P-9480
2203-Q-9481
2203-R-9482
2203-S-9483
2203-T-9484
2203-U-9485
SERVICE KITS
KIT 2389
ITEM
1
2
3
4
5
PART NUMBER
2233-J-1024
2234-V-1270
3278-S-305
1229-V-4624
1229-R-1032
QTY.
DESCRIPTION
4
Differential Pinion
2
1
Differential Spider
2
Thrust Washer
4
Thrust Washer
REMARKS
RD-17-145, RP-17-145, RS-16-140,
RS-16-141, RS-17-140, RS-17-141
QTY.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
DESCRIPTION
REMARKS
MD-20-143, MP-20-143, RD-17-145,
RD-20-140, RD-20-145, RD-22-145,
RP-17-145, RP-20-145, RP-22-145
QTY.
1
Tube,Fin.
1
Piston
1
O-Ring
1
Gasket
4
Capscrew
4
Washer
DESCRIPTION
REMARKS
Minor repair kit for original design main
differential lock carriers.
RD-20-145, RP-20-145, RP-22-145,
RR-20-145, RR-22-145, RS-21-145
QTY.
1
1
1
1
1
1
1
1
1
1
4
4
1
1
1
1
1
1
DESCRIPTION
REMARKS
RD-20-145, RD-22-145, RP-20-145, RP-22-145
KIT 2396
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
2203-D-9806
2203-E-9807
2203-F-9808
2203-G-9809
2203-H-9810
2203-J-9812
2203-K-9813
2203-L-9814
2203-M-9815
2203-N-9816
2203-P-9818
2203-Q-9819
2203-R-9820
2203-S-9821
2203-T-9822
2203-U-9823
KIT 2405
ITEM
1
2
3
4
5
6
PART NUMBER
3196-F-32
2230-N-170
5-X-1153
2208-H-944
41-X-1364
MWA-506
KIT 2413
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NUMBER
3296-W-1167
3107-D-1018
2244-L-1026
43-X-1006
2258-L-714
3196-F-32
2230-N-170
5-X-1153
2208-H-944
3266-F-1020
MWA-506
41-X-1364
2208-L-1000
MS-210016-1
41-X-1333
3237-W-1167
1227-P-1056
2257-M-1235
Shift Fork, Finished
Clutch Collar
Shift Shaft
Roll Pin
Spring
Tube,Fin.
Piston
O-Ring
Gasket
Cover,Fin.
Washer
Capscrew
Gasket
Capscrew
Capscrew
Switch Assembly Sensor
Sensor Adjusting Nut
Sensor/Switch Clip
41
SERVICE KITS
KIT 2420
ITEM
1
2
3
4
5
6
7
PART NUMBER
2233-U-1035
2234-R-1188
3892-S-5843
2297-E-5335
3278-A-1119
1229-T-1606
1229-S-4985
QTY.
4
1
1
1
1
4
1
DESCRIPTION
Differential Pinion
Forward IAD Gear
Snap Ring
Differential Spider, Finished
Thrust Washer
Thrust Washer
QTY.
1
1
4
1
1
4
Shim - .076mm/.003 in.
Shim - .127mm/.005 in.
Shim - .254mm/.010 in.
Shim - .075mm/.003 in.
Shim - .125mm/.005 in.
Shim - .250mm/.010 in.
REMARKS
IAD nest kit for the bolted IAD. Includes forward
and rear side gears. For carriers built after
10/98.
MD-20-143, MP-20-143, RD-17-144,
RP-17-144, RD-19-144, RP-19-144,
RD-17-145, RP-17-145, RD-19-145,
RP-19-145, RD-20-145, RP-20-145
KIT 2429
ITEM
1
2
3
4
5
6
PART NUMBER
2203-K-9241
2203-L-9242
2203-M-9243
2203-F-2788
2203-G-2789
2203-H-2790
DESCRIPTION
REMARKS
MD-20-143, MP-20-143, RD-17-144,
RD-17-145, RD-19-144, RD-20-140,
RD-20-145, RD-22-145, RP-17-144,
RP-17-145, RP-19-144, RP-20-145,
RP-22-145
KIT 2431
ITEM
1
2
3
4
PART NUMBER
2233-J-1024
2234-V-1270
1229-V-4624
1229-R-1032
QTY.
DESCRIPTION
4
Differential Pinion
2
2
Thrust Washer
4
Thrust Washer
REMARKS
RD-17-145, RP-17-145, RR-17-145,
RS-16-140, RS-16-141, RS-17-140,
RS-17-141, RS-19-145
QTY.
1
1
1
1
1
1
1
1
1
1
4
2
6
DESCRIPTION
Shift Unit Cylinder, Finished
Cover, Finished
Piston
Differential Lock Out Push Rod
Spring
O-Ring
O-Ring
O-Ring
Snap Ring
Snap Ring
Capscrew
Special Screw
Washer
REMARKS
For "reverse-air" Navistar only.
140 Series
QTY.
1
1
1
1
1
1
1
DESCRIPTION
Spring
Piston
O-Ring
O-Ring
O-Ring
Snap Ring
Snap Ring
REMARKS
For "reverse-air" Navistar only.
140 Series
KIT 2445
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NUMBER
3261-R-1084
3266-Q-1161
2230-D-1096
2244-D-1070
2258-E-1175
5-X-1195
5-X-1196
5-X-1197
1229-P-4280
1229-W-1245
MS-206060-1
41-X-1080
MWA-506
KIT 2446
ITEM
1
2
3
4
5
6
7
42
PART NUMBER
2258-E-1175
2230-D-1096
5-X-1195
5-X-1196
5-X-1197
1229-P-4280
1229-W-1245
SERVICE KITS
KIT 2482
ITEM
PART NUMBER
1
3892-S-5843
2
3892-N-4902
3
1229-S-4985
QTY.
1
Forward IAD Gear
1
Helical Driven Gear
1
Thrust Washer
DESCRIPTION
REMARKS
MD-20-143, MP-20-143, RD-17-145,
RD-20-140, RD-20-145, RD-22-145,
RP-17-145, RP-22-145
KIT 2488
ITEM
1
2
3
4
5
PART NUMBER
A-3235-W-2025
2234-R-1188
3892-S-5843
1229-S-4985
2297-E-5335
QTY.
DESCRIPTION
1
Interaxle Differential Case & Nest Assembly
1
1
Forward IAD Gear
1
Thrust Washer
1
Snap Ring
REMARKS
Old style IAD (1.77"-34 spline side gear).
Services all forward carriers built before 10/98.
After 10/98 use KIT 2522. RD-17-145,
RD-20-140, RD-20-145, RD-22-145,
RP-17-145, RP-20-145, RP-22-145
QTY.
2
Tube Finished
2
Special Washer
2
Snap Ring
DESCRIPTION
REMARKS
ABS carrier 2"-39 spline
RD-20-145, RP-20-145, RR-20-145
QTY.
2
Tube,Fin.
2
Special Washer
2
Snap Ring
DESCRIPTION
REMARKS
ABS carrier 2.10"-41 spline
RD-17-145, RR-17-145
KIT 2511
ITEM
PART NUMBER
1
3216-S-4361
2
42-X-1248
3
1229-H-4428
KIT 2512
ITEM
PART NUMBER
1
3216-Q-4359
2
42-X-1248
3
1229-H-4428
KIT 2522
ITEM
1
2
3
4
5
PART NUMBER
A-3235-N-2380
2234-R-1188
3892-S-5843
1229-S-4985
2297-E-5335
QTY.
DESCRIPTION
1
1
1
Forward IAD Gear
1
Thrust Washer
1
Snap Ring
REMARKS
New style IAD. Use for carriers built after 10/98.
MD-20-143, MP-20-143, RD-17-144,
RD-17-145, RD-19-144, RD-20-140,
RD-20-145, RD-22-145, RP-17-144,
RP-17-145, RP-19-144, RP-20-145, RP-22-145
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REMARKS
MR-20-143
KIT 2541
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
1244-M-2431
1244-N-2432
1244-P-2434
1244-Q-2435
1244-R-2436
1244-S-2437
1244-T-2438
1244-U-2439
1244-V-2440
1244-W-2441
1244-X-2442
1244-Y-2443
1244-Z-2444
1244-A-2445
1244-B-2446
1244-C-2447
DESCRIPTION
KIT 2636
ITEM
PART NUMBER
1
40-X-1236
2
1229-A-2653
QTY.
1
Lock Nut
1
Washer-Flat
DESCRIPTION
REMARKS
M32 x 1.5 nut thread. Rear input, front output.
140 Series
QTY.
1
Lock Nut
1
Washer-Flat
DESCRIPTION
REMARKS
M39 x 1.5 nut thread. Front input, rear input.
140 Series
QTY.
1
1
DESCRIPTION
REMARKS
M45 x 1.5 nut thread. Front input.
140 Series
KIT 2637
ITEM
PART NUMBER
1
40-X-1237
2
1229-T-1736
KIT 2638
ITEM
PART NUMBER
1
40-X-1233
2
1229-W-4521
Lock Nut
Washer
43
SERVICE KITS
KIT 2647
ITEM
1
2
3
4
5
PART NUMBER
3235-T-2152
3235-U-2153
41-X-1327
1229-C-1511
3278-Y-1117F
QTY.
1
1
16
16
1
DESCRIPTION
Half Flange Differential Case, Finished
Plain Half Differential Spider, Finished
Special Screw
Washer-Flat
REMARKS
Diff. case and spider update kit. For 44,000 lb.
tandems without differential lock. 4.30 ratio and
slower.
RD-22-145, RP-22-145, RR-22-145
QTY.
1
1
16
16
1
DESCRIPTION
Plain Half Differential Case, Finished
Special Screw
Washer-Flat
REMARKS
Diff. case and spider update kit. For 44,000 lb.
tandems with differential lock. 4.30 ratio and
slower.
RD-22-145, RP-22-145, RR-22-145
QTY.
1
1
1
1
1
1
1
1
1
DESCRIPTION
Clutch Collar
Sensor/Switch Clip
Spring
O-Ring
DCDL Shift Cylinder
Caging Bolt
Push Rod
REMARKS
Screw in air shift cage kit for post 11/93 DCDL
145 series carriers
RD-17-144, RD-19-144, RD-20-145,
RD-22-145, RP-17-144, RP-19-144,
RP-20-145, RP-22-145, RR-17-144,
RR-19-144, RR-20-145, RR-22-145,
RS-17-144, RS-19-144, RS-21-145
QTY.
1
1
16
16
1
DESCRIPTION
Plain Half Differential Case, Finished
Special Screw
Washer-Flat
REMARKS
Diff. case and spider update kit.
For 44,000 lb. tandems with differential lock.
Ratios 3.42 thru 4.11.
RD-22-145, RP-22-145, RR-22-145
QTY.
1
1
16
16
1
DESCRIPTION
Plain Half Differential Spider, Finished
Special Screw
Washer-Flat
REMARKS
Diff. case and spider update kit.
For 44,000 lb. tandems with differential lock.
Ratios 3.42 thru 4.11.
RD-22-145, RP-22-145, RR-22-145
KIT 2648
ITEM
1
2
3
4
5
PART NUMBER
3235-T-2152
3235-V-2154
41-X-1327
1229-C-1511
3278-Y-1117F
KIT 2662
ITEM
1
2
3
4
5
6
7
8
9
PART NUMBER
3296-Z-1170
3107-D-1018
3237-W-1167
2257-M-1235
2258-N-1262
5-X-521
A-3261-A-1067
41-X-1368
2244-Z-1222
KIT 2664
ITEM
1
2
3
4
5
PART NUMBER
3235-D-2188
3235-V-2154
41-X-1327
1229-C-1511
3278-Y-1117F
KIT 2665
ITEM
1
2
3
4
5
PART NUMBER
3235-D-2188
3235-U-2153
41-X-1327
1229-C-1511
3278-Y-1117F
KIT 2668
ITEM
PART NUMBER
1
10-X-1594
2
10-X-1597
3
1229-W-1557
QTY.
7
Screw-Special
3
Screw-Special
12 Washer-Hardened
DESCRIPTION
REMARKS
Carrier to housing capscrew kit.
145 Series Forward
KIT 2686
ITEM
PART NUMBER
1
2244-D-1070
2
3266-Q-1161
QTY.
DESCRIPTION
1
Differential Lock Out Push Rod
1
Cover, Finished
REMARKS
Navistar "reverse air" shift
RD-20-145, RD-22-145, RP-20-145, RP-22-145
QTY.
1
DCDL Shift Cylinder
1
Push Rod
1
Caging Bolt
1
O-Ring
REMARKS
Main diff. lock, screw-in shift, Services all new
style screw- in type main differential lock
carriers. MD-20-143, MP-20-143, RD-17-144,
RD-19-144, RD-20-145, RD-22-145,
RP-17-144, RP-19-144, RP-20-145,
RP-22-145, RR-17-144, RR-19-144,
RR-20-145, RS-17-144, RS-19-144, RS-21-145
KIT 2691
ITEM
1
2
3
4
44
PART NUMBER
A-3261-A-1067
2244-Z-1222
41-X-1368
5-X-521
DESCRIPTION
SERVICE KITS
KIT 2696
ITEM
1
2
3
4
5
PART NUMBER
2233-X-1116
2234-X-1272
3278-Y-1117F
1229-V-4624
1229-R-1032
QTY.
DESCRIPTION
4
Differential Pinion
2
1
2
Thrust Washer
4
Thrust Washer
REMARKS
With diff. spider (2.10"-41 spline side gear)
RD-22-145, RP-22-145, RR-22-145
QTY.
DESCRIPTION
4
Differential Pinion
2
2
Thrust Washer
4
Thrust Washer
REMARKS
Less diff. spider (2.10"-41 spline side gear)
RD-22-145, RP-22-145, RR-22-145
QTY.
1
1
DESCRIPTION
Update Kit
Shift Kit
REMARKS
Carrier and cap update kit (with diff. lock,
less pump)
RD-20-145, RD-22-145
QTY.
1
1
DESCRIPTION
Update Kit
Shift Kit
REMARKS
with pump)
RD-20-145, RP-22-145
QTY.
1
1
DESCRIPTION
Update Kit
Shift Kit
REMARKS
Carrier and cap update kit (less diff. lock,
less pump)
MD-20-143, RD-17-145, RD-20-140,
RD-20-145, RD-22-145
DESCRIPTION
REMARKS
Navistar "reverse air" shift
RD-17-145, RD-20-140, RD-20-145,
RD-22-145, RP-20-145, RP-22-145
KIT 2703
ITEM
1
2
3
4
PART NUMBER
2233-X-1116
2234-X-1272
1229-V-4624
1229-R-1032
KIT 2704
ITEM
PART NUMBER
1
KIT 2752
2
KIT 2825
KIT 2705
ITEM
PART NUMBER
1
KIT 2754
2
KIT 2825
KIT 2706
ITEM
PART NUMBER
1
KIT 2751
2
KIT 2825
KIT 2709
ITEM
1
2
3
4
PART NUMBER
5-X-1195
5-X-1196
5-X-1197
1229-P-4280
QTY.
1
O-Ring
1
O-Ring
1
O-Ring
1
Snap Ring
KIT 2730
ITEM
1
2
3
4
5
PART NUMBER
A2-3200-L-1676
A8-3235-W-1843
JM-716610
JM-716649
2214-C-1095
QTY.
DESCRIPTION
1
Differential Carrier and Cap Assembly
1
Case Assy-Diff
1
Bearing Cup
1
Bearing Cone
1
Bearing Adjuster Ring, Finished
REMARKS
Carrier and cap update kit (with diff case
assembly, all ratios except 3.91 and 4.10)
less diff. lock
RR-20-145, RR-22-145, RS-21-145
QTY.
DESCRIPTION
1
1
Clutch Collar
1
REMARKS
Inter-axle diff., shift fork and clutch collar,
old style
RD-17-145, RD-20-140, RD-20-145,
RD-22-145, RP-17-145, RP-20-145, RP-22-145
QTY.
1
1
1
1
1
REMARKS
less pump)
RD-20-145
KIT 2743
ITEM
PART NUMBER
1
A-3235-W-2025
2
3107-M-1183
3
3296-Z-1326
KIT 2747
ITEM
1
2
3
4
5
PART NUMBER
A2-3200-E-1981
KIT 2691
2206-L-1156
3296-Z-1170
2258-N-1262
DESCRIPTION
Shift Cylinder Kit
Elbow Fitting
Spring
45
SERVICE KITS
KIT 2750
ITEM
1
2
3
4
5
PART NUMBER
A-3261-A-1067
2244-Z-1222
2258-N-1262
5-X-521
41-X-1368
QTY.
1
1
1
1
1
DESCRIPTION
DCDL Shift Cylinder
Push Rod
Spring
O-Ring
Caging Bolt
REMARKS
Main diff. lock, screw-in shift, Services all new
style screw- in type main differential lock
carriers. MD-20-143, MP-20-143, RD-17-144,
RD-19-144, RD-20-145, RD-22-145,
RP-17-144, RP-19-144, RP-20-145,
RP-22-145, RR-17-144, RR-19-144,
RR-20-145, RS-17-144, RS-19-144, RS-21-145
KIT 2751
ITEM
PART NUMBER
1
A2-3200-D-1980
2
41-X-1371
3
40-X-1016
QTY.
DESCRIPTION
1
1
Thrust Screw
1
Jam Nut
REMARKS
less pump, with thrust screw)
MD-20-143, RD-17-145, RD-20-140,
RD-20-145, RD-22-145
QTY.
1
1
1
1
1
DESCRIPTION
Shift Cylinder Kit
Elbow Fitting
Spring
REMARKS
less pump, with thrust screw)
RD-22-145
QTY.
DESCRIPTION
1
1
Thrust Screw
1
Jam Nut
REMARKS
with pump, with thrust screw)
RP-22-145
QTY.
1
1
1
1
1
DESCRIPTION
Shift Cylinder Kit
Elbow Fitting
Spring
REMARKS
with pump, with thrust screw)
MP-20-143, RP-20-145, RP-22-145
QTY.
1
1
1
1
1
1
1
DESCRIPTION
Shift Cylinder Kit
Elbow Fitting
Spring
Jam Nut
Thrust Screw
REMARKS
with thrust screw)
RR-20-145, RR-22-145, RS-21-145
KIT 2752
ITEM
1
2
3
4
5
PART NUMBER
A2-3200-F-1982
KIT 2691
2206-L-1156
3296-Z-1170
2258-N-1262
KIT 2753
ITEM
PART NUMBER
1
A2-3200-J-1986
2
41-X-1371
3
40-X-1016
KIT 2754
ITEM
1
2
3
4
5
PART NUMBER
A2-3200-L-1988
KIT 2691
2206-L-1156
3296-Z-1170
2258-N-1262
KIT 2755
ITEM
1
2
3
4
5
6
7
PART NUMBER
A2-3200-F-1904
KIT 2691
2206-L-1156
3296-Z-1170
2258-N-1262
40-X-1016
41-X-1371
KIT 2756
ITEM
PART NUMBER
1
A2-3200-A-1873
2
41-X-1371
3
40-X-1016
QTY.
DESCRIPTION
1
1
Thrust Screw
1
Jam Nut
REMARKS
Carrier and cap update kit (with thrust screw)
RR-17-145, RR-20-140, RR-20-145,
RR-22-145, RS-16-141, RS-17-141,
RS-19-145, RS-21-145
QTY.
DESCRIPTION
1
1
Thrust Washer
REMARKS
Side gear and washer kit
(2"-39 spline side gear)
RD-17-145, RP-17-145, RR-17-145,
RS-16-140, RS-16-141, RS-17-140,
RS-17-141, RS-19-145
KIT 2758
ITEM
PART NUMBER
1
2234-V-1270
2
1229-V-4624
46
SERVICE KITS
KIT 2759
ITEM
PART NUMBER
1
2234-U-1269
2
1229-V-4624
QTY.
DESCRIPTION
1
1
Thrust Washer
REMARKS
(2.1"-41 spline side gear)
RD-20-140, RD-20-145, RP-20-145,
RR-20-140, RR-20-145, RS-21-145
QTY.
DESCRIPTION
1
1
Thrust Washer
REMARKS
(2.1"-41 spline side gear)
RD-22-145, RP-22-145, RR-22-145
QTY.
1
Washer-Flat
1
Washer-Lock
DESCRIPTION
REMARKS
RD-17-145, RP-17-145, RR-17-145,
RS-16-140, RS-16-141, RS-17-140,
RS-17-141, RS-17-145, RS-19-145
QTY.
16 Washer-Hardened
1
Loctite
16 Special Screw
DESCRIPTION
REMARKS
Diff case capscrew kit.
145 Series
QTY.
1
Push Rod
1
DCDL Shift Cylinder
DESCRIPTION
REMARKS
Main Differential Kit
140 Series
QTY.
DESCRIPTION
1
Push Rod
1
IAD Shift Cylinder Assembly
REMARKS
I.A.D. shift cylinder kit.
145 Series
QTY.
DESCRIPTION
1
Oil Seal Assembly
1
Input Shaft Assembly
1
Bearing Cage Assembly
1
Bearing Cone
REMARKS
Converts 145 series pump version 2"-39 input
shaft to 2.35"-46 spline version.
145 Series
QTY.
DESCRIPTION
1
Oil Seal Assembly
1
Bearing Cage Assembly
1
1
Bearing Cone
REMARKS
Converts 145 series less pump version 2"-39
input shaft to 2.35"-46 spline version.
145 Series
QTY.
1
Oil Pump Assembly
1
Input Shaft Conv. Kit
DESCRIPTION
REMARKS
Pump update kit
MP-20-143, RP-17-145, RP-20-145, RP-22-145
QTY.
1
Thrust Washer
1
Forward IAD Gear
DESCRIPTION
REMARKS
Helical drive gear and thrust washer, replacing
3892-R-4932.
145 Series Forward
KIT 2760
ITEM
PART NUMBER
1
2234-X-1272
2
1229-V-4624
KIT 2761
ITEM
PART NUMBER
1
1229-G-1021
2
1229-J-4638
KIT 2819
ITEM
PART NUMBER
1
1229-D-4632
2
2297-F-6324
3
41-X-1327
KIT 2824
ITEM
PART NUMBER
1
2244-Z-1222
2
A-3261-A-1067
KIT 2825
ITEM
PART NUMBER
1
2244-Y-1221
2
A4-3261-Q-1057
KIT 2833
ITEM
1
2
3
4
PART NUMBER
A1-1205-X-2728
A1-3297-T-1346
A-3226-D-1226
JM-511945
KIT 2834
ITEM
1
2
3
4
PART NUMBER
A1-1205-X-2728
A-3226-V-1296
A-3297-U-1347
JM-511945
KIT 2835
ITEM
PART NUMBER
1
A-3303-P-1030
2
KIT 2833
KIT 4007
ITEM
PART NUMBER
1
1229-S-4985
2
3892-S-5843
47
SERVICE KITS
KIT 4284
ITEM
PART NUMBER
1
41-X-1637
2
1199-R-2176
3
1246-P-1134
QTY.
2
Capscrew
2
Cotter Pin
1
Spirol Pin
DESCRIPTION
REMARKS
QTY.
1
Bearing Cup
1
Bearing Cup
1
Bearing Cone
1
Bearing Cone
1
Spigot Bearing
1
Bearing Cone
1
Bearing Cone
1
Bearing Cup
1
Bearing Cup
1
Seal Assy
DESCRIPTION
REMARKS
RS-16-140, RS-17-140
QTY.
1
Bearing Cup
1
Bearing Cone
1
Bearing Cup
1
Bearing Cone
1
Spigot Bearing
2
Bearing Cup
2
Bearing Cone
1
Seal Assy
DESCRIPTION
REMARKS
RS-16-140, RS-17-140
QTY.
1
Bearing Cup
1
Bearing Cup
1
Bearing Cup
1
Bearing Cone
1
Bearing Cone
2
Bearing Cup
2
Bearing Cup
1
Bearing Cone
1
Bearing Cup
1
Oil Seal Assembly
1
Seal Assembly
1
O-Ring
1
Bearing Cone
2
Bearing Cone
2
Bearing Cone
1
O-Ring
DESCRIPTION
REMARKS
New Style Thru-Shaft
RD-20-140
Lock pin kit
145 Series
KIT 4345
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
JM-716610
1228-L-1130
55200C
M804049
1228-F-552
JM-716649
A-1228-L-1130
55437
M804010
A-1205-D-1928
KIT 4350
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
M804010
M804049
55437
55200C
1228-F-552
JM-716610
JM-716649
A-1205-D-1928
KIT 4356
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
H715311
72487
JLM-710910
H715334
72212C
LM-603011
JM-716610
JLM-710949C
3920
A1-1205-X-2728
A-1205-G-2425
5-X-1034
JM-511945
LM-603049
JM-716649
5-X-1343
KIT 4385
ITEM
1
2
3
4
5
6
7
48
PART NUMBER
72212C
55206C
A1-1228-H-606
72487
55437
1228-F-552
A1-1205-Z-2730
QTY.
DESCRIPTION
1
Bearing Cone
1
Bearing Cone
2
Tapered Bearing Assembly
1
Bearing Cup
1
Bearing Cup
1
Spigot Bearing
1
Oil Seal Assembly
REMARKS
RR-20-145, RR-22-145, RS-21-145
SERVICE KITS
KIT 4390
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
JM-716649
A-1228-L-1130
JM-716610
1228-L-1130
72487
55437
72212C
55206C
1228-F-552
A1-1205-Z-2730
QTY.
1
Bearing Cone
1
Bearing Cone
1
Bearing Cup
1
Bearing Cup
1
Bearing Cup
1
Bearing Cup
1
Bearing Cone
1
Bearing Cone
1
Spigot Bearing
1
Oil Seal Assembly
DESCRIPTION
REMARKS
RR-17-144, RR-19-144, RR-20-145,
RR-22-145, RS-17-144, RS-19-144,
RS-21-145
QTY.
1
Bearing Cup
1
Bearing Cup
1
Bearing Cup
1
Bearing Cone
1
Bearing Cone
2
Bearing Cup
2
Bearing Cup
1
Bearing Cone
1
Bearing Cup
2
Oil Seal Assembly
1
O-Ring
1
O-Ring
1
Bearing Cone
1
Bearing Cup
2
Bearing Cone
2
Bearing Cone
DESCRIPTION
REMARKS
Pre 11/93
RD-17-145, RD-20-145, RD-22-145,
RP-17-145, RP-20-145, RP-22-145
QTY.
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
DESCRIPTION
REMARKS
Forward Axles less diff. lock, with new input
and thru shaft
MD-20-143, MP-20-143, RD-17-144,
RD-17-145, RD-19-144, RD-20-145,
RD-22-145, RP-17-144, RP-17-145,
RP-19-144, RP-20-145, RP-22-145
DESCRIPTION
REMARKS
RR-17-144, RR-17-145, RR-19-144,
RR-20-140, RR-20-145, RR-22-145,
RS-16-141, RS-17-141, RS-17-144,
RS-19-144, RS-19-145, RS-21-145
KIT 4395
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
H715311
72487
JLM-710910
H715334
72212C
JLM-104910
JM-716610
JLM-710949C
JM511910
R945008
5-X-1034
5-X-1343
JM-511946
3920
LM-104949
JM-716649
KIT 4396
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NUMBER
H715311
72487
JLM-710910
H715334
72212C
JLM-104910
JM-716610
JLM-710949C
3920
A1-1205-Y-2729
A1-1205-X-2728
5-X-1034
5-X-1343
JM-511945
LM-104949
JM-716649
Bearing Cup
Bearing Cup
Bearing Cup
Bearing Cone
Bearing Cone
Bearing Cup
Bearing Cup
Bearing Cone
Bearing Cup
Oil Seal Assembly
Oil Seal Assembly
O-Ring
O-Ring
Bearing Cone
Bearing Cone
Bearing Cone
KIT 4400
ITEM
1
2
3
4
5
6
7
8
PART NUMBER
72487
72212C
55437
55206C
1228-F-552
JM-716610
JM-716649
A1-1205-Z-2730
QTY.
1
Bearing Cup
1
Bearing Cone
1
Bearing Cup
1
Bearing Cone
1
Spigot Bearing
2
Bearing Cup
2
Bearing Cone
1
Oil Seal Assembly
49
SERVICE KITS
KIT 4406
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NUMBER
72487
72212C
H715311
H715334
3920
JM-511945
JLM-710910
JLM-710949C
1228-L-1130
A-1228-L-1130
JM-716610
JM-716649
JLM-104910
LM-104949
A1-1205-Y-2729
A1-1205-X-2728
5-X-1034
5-X-1343
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Bearing Cup
Bearing Cone
Oil Seal Assembly
Oil Seal Assembly
O-Ring
O-Ring
REMARKS
Forward Axles with diff. lock, with new input
and thru shaft
MD-20-143, MP-20-143, RD-17-144,
RD-19-144, RD-20-145, RD-22-145,
RP-17-144, RP-19-144, RP-20-145,
RP-22-145
KIT 4455
ITEM
PART NUMBER
1
3237-W-1167
2
2257-M-1235
QTY.
DESCRIPTION
1
1
Sensor/Switch Clip
REMARKS
With diff. lock
140 Series
KIT 4461
ITEM
1
2
3
4
5
6
7
PART NUMBER
72487
72225C
H715311
H715334
JM-716610
JM-716649
A1-1205-Z-2730
QTY.
1
Bearing Cup
1
Bearing Cone
1
Bearing Cup
1
Bearing Cone
2
Bearing Cup
2
Bearing Cone
1
Oil Seal Assembly
DESCRIPTION
REMARKS
MR-20-143
QTY.
1
Thrust Screw
1
Thrust Block
DESCRIPTION
REMARKS
Thrust screw and block kit for 3200-W-2051
amboid carrier.
MR-20-143M, MS-21-143M
KIT 4766
ITEM
PART NUMBER
1
10-X-1710
2
2297-P-8336
MPS 3344 145
ITEM
1
2
3
4
5
6
7
8
9
10
50
PART NUMBER
A-3297-U-1347
1229-S-4985
3892-S-5843
A-3235-W-2025
2297-E-5335
2234-R-1188
A1-1205-X-2728
2203-K-9241
2203-L-9242
2203-M-9243
QTY.
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
Thrust Washer
Forward IAD Gear
Snap Ring
Oil Seal Assembly
Shim - .076mm/.003 in.
Shim - .127mm/.005 in.
Shim - .254mm/.010 in.
REMARKS
Input shaft/IAD update kit for 2.38"-46 spline,
less pump version.
145 Series
SERVICE KITS
MPS 3345 145
ITEM
1
2
3
4
5
6
7
8
9
10
PART NUMBER
A1-3297-T-1346
1229-S-4985
3892-S-5843
A-3235-W-2025
2297-E-5335
2234-R-1188
A1-1205-X-2728
2203-K-9241
2203-L-9242
2203-M-9243
QTY.
1
1
1
1
1
1
1
1
1
1
DESCRIPTION
Thrust Washer
Forward IAD Gear
Snap Ring
Oil Seal Assembly
Shim - .076mm/.003 in.
Shim - .127mm/.005 in.
Shim - .254mm/.010 in.
REMARKS
Input shaft/IAD update kit for 2.38"-46 spline,
for pump version.
145 Series
51
XpresswayPlus.com
Don't forget about using XpresswayPlus.com for:
y Ordering parts online
y Reference Library
y Order status
y The Company Store
y Price and availability
y Easy to use navigating instructions
y Visual search for new users
y Dealer/Distributor locator
y Online e-mail or phone numbers for Customer Service, Information Services,
Marketing, Catalog, and eSupport
XpresswayPlus is easy to find, can reduce phone calls, and save you valuable time.
52
WHAT YOU NEED:
WHERE TO LOOK:
ACCOUNT CHANGE
AFTERMARKET & PRODUCTION ASSEMBLIES
APPLICATION INFORMATION
BILL-OF-LADING NUMBER
BILL-OF-MATERIAL
BULLETINS
CONTACT NAMES & NUMBERS
FIELD SUPPORT REPRESENTATIVES
INVOICE (VIEW & PRINT)
NEWSLETTER
ORDER DETAILS
ORDER HISTORY FILE
ORDER MERCHANDISE
ORDER SUBMIT
ORDER SUBMIT - STOCK UPLOAD (MULTIPLE LINES)
PART DETAILS
PART IMAGES
PART NUMBER COMPARISON
PARTS BOOKS
PASSWORD CHANGE
PRICE (LIST)
PRICE (NET) & AVAILABILITY
PRODUCT BROCHURES
PRODUCT UPDATES
PROOF-OF-DELIVERY
REQUEST-FOR-QUOTATION (FOR MERITOR BRAND)
SALES LITERATURE
SEND QUESTIONS, COMMENTS, ISSUES
SHIPPER NUMBER
TECH TIPS
TRACKING NUMBER
WARRANTY INFORMATION
WHERE-USED INFORMATION
CUSTOMER SERVICE
CATALOG
CATALOG
ORDER STATUS
CATALOG
REFERENCE LIBRARY
CUSTOMER SERVICE
CUSTOMER SERVICE
ORDER STATUS
REFERENCE LIBRARY
ORDER STATUS
ORDER STATUS
COMPANY STORE
CREATE NEW ORDER
CREATE NEW ORDER
CATALOG
CATALOG
CATALOG
REFERENCE LIBRARY
CUSTOMER SERVICE
CATALOG
PRICE & AVAILABILITY
REFERENCE LIBRARY
REFERENCE LIBRARY
ORDER STATUS
PRICE REQUEST
REFERENCE LIBRARY
CONTACT US
ORDER STATUS
REFERENCE LIBRARY
ORDER STATUS
REFERENCE LIBRARY
CATALOG
NUMERICAL PARTS LISTING
PART NUMBER
5-X-521
5-X-1034
5-X-1153
5-X-1195
5-X-1196
5-X-1197
5-X-1198
10-X-1594
10-X-1597
10-X-1710
15-X-387
40-X-1016
40-X-1145
40-X-1182
40-X-1233
40-X-1236
40-X-1237
41-X-1022
41-X-1043
41-X-1080
41-X-1208
41-X-1209
41-X-1216
41-X-1327
41-X-1330
41-X-1333
41-X-1359
41-X-1364
41-X-1365
41-X-1368
41-X-1371
42-X-1021
42-X-1248
43-X-1006
43-X-1007
1199-R-2176
A-1205-W-1349
A-1205-D-1928
A-1205-G-2425
A-1205-Q-2487
1220-K-89
1227-R-330
1227-W-517
1227-Z-1040
1227-E-1045
1227-P-1056
1228-F-552
A1-1228-H-606
1228-L-1130
A-1228-L-1130
1229-L-1026
1229-R-1032
PAGE
8,18
4
8,18
5
5
5
8,18
21
21
13
20
6,13
6
8,14
4,6
11,20
4,11,20
8,19
11
5,18
4
5
8,14
7,18
18
8,18
19
9,19
8,13
8,18
6,13
8,13
9,19
8,18
9,18
8,13
21
11
20
21
18
21
21
21
21
8,19
13
14
6,14
7,14
18
8,18
PART NUMBER
1229-W-1245
1229-A-1301
1229-U-1503
1229-C-1511
1229-W-1557
1229-K-1597
1229-T-1606
1229-E-1669
1229-N-1730
1229-T-1736
1229-A-2237
1229-B-2238
1229-C-2239
1229-D-2240
1229-E-2241
1229-F-2242
1229-G-2243
1229-H-2244
1229-J-2246
1229-K-2247
1229-P-2590
1229-Q-2591
1229-R-2592
1229-T-2594
1229-U-2595
1229-V-2596
1229-W-2597
1229-X-2598
1229-Y-2599
1229-A-2653
1229-S-2593
1229-Z-3172
1229-F-4062
1229-G-4063
1229-W-4131
1229-P-4280
1229-B-4422
1229-H-4428
1229-U-4519
1229-W-4521
1229-X-4522
1229-V-4624
1229-D-4632
1229-F-4634S
1244-V-1764
1244-F-2346
1244-V-2440
1244-M-2431
1244-N-2432
1244-P-2434
1244-Q-2435
1244-R-2436
PAGE
5
13
8,14
4,11
21
4,6
4
4,9,21
4
4,11,20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
11,20
20
17
9
6
20
4
9,19
9,19
9,19
6
8,17
8,17
7,18
21
6
12
11
11
11
11
11
11
PART NUMBER
1244-S-2437
1244-T-2438
1244-U-2439
1244-W-2441
1244-X-2442
1244-Y-2443
1244-Z-2444
1244-A-2445
1244-B-2446
1244-C-2447
1246-M-1131
1246-P-1134
1250-E-473
1250-N-1080
1250-U-1217
1250-L-1286
2203-F-2788
2203-G-2789
2203-H-2790
2203-C-8115
2203-D-8116
2203-E-8117
2203-K-9241
2203-L-9242
2203-M-9243
2203-J-9474
2203-K-9475
2203-L-9476
2203-M-9477
2203-N-9478
2203-P-9480
2203-Q-9481
2203-R-9482
2203-S-9483
2203-T-9484
2203-U-9485
2203-V-9486
2203-W-9487
2203-X-9488
2203-Y-9489
2203-Z-9490
2203-A-9491
2203-B-9492
2203-C-9493
2203-D-9494
2203-E-9495
2203-F-9496
2203-B-9804
2203-D-9806
2203-E-9807
2203-F-9808
2203-G-9809
PAGE
11
11
11
11
11
11
11
11
11
11
9
8
21
9
8
21
6,11
6,11
6,11
11
11
11
4
4
4
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
11
6
6
6
6
53
PART NUMBER
2203-H-9810
2203-J-9812
2203-K-9813
2203-L-9814
2203-M-9815
2203-N-9816
2203-P-9818
2203-Q-9819
2203-R-9820
2203-S-9821
2203-T-9822
2203-U-9823
2208-P-536
2208-H-944
2208-L-1000
2208-R-1058
2214-L-272
2214-Y-1039
2214-C-1095
2214-U-1139
2230-N-170
2230-D-1096
2230-T-1190
2233-J-1024
2233-M-1027
2233-U-1035
2233-X-1116
2234-T-1086
2234-R-1188
2234-U-1269
2234-V-1270
2234-X-1272
2244-Z-52
2244-K-1025
2244-L-1026
2244-D-1070
2257-M-1235
2258-U-411
2258-L-714
2258-Z-1118
2258-E-1175
2258-U-1243
2258-N-1262
2297-T-4180
2297-U-5273
2297-Z-5278
A-2297-D-5334
2297-E-5335
2297-A-7021
2297-C-7049
2297-P-8336
2803-Q-2851
54
PAGE
6
6
6
6
6
6
6
6
6
6
6
6
21
8,18
9,19
5
13
6,13
6,13
13
8,18
5
8,18
8,18
18
4
8,18
17
4
8,17
8,17
8,17
18
4
8,18
4
8,19
4
8,18
9
4
9,19
8,18
14
9
9
9
4
20,21
18
13
11
PART NUMBER
2803-R-2852
2803-S-2853
2803-T-2854
3107-R-1006
3107-D-1018
3107-M-1183
3196-F-32
A2-3200-R-1500
A2-3200-G-1645
A2-3200-X-1662
A2-3200-L-1676
A2-3200-G-1853
A2-3200-C-1849
A2-3200-D-1850
A2-3200-E-1851
A2-3200-F-1852
A2-3200-S-1865
A2-3200-A-1873
A2-3200-G-1879
A2-3200-M-1885
A2-3200-D-1902
A2-3200-E-1903
A2-3200-F-1904
A2-3200-P-1914
A2-3200-S-1917
A2-3200-Z-1924
A2-3200-B-1978
A2-3200-C-1979
A2-3200-D-1980
A2-3200-E-1981
A2-3200-F-1982
A2-3200-H-1984
A2-3200-J-1986
A2-3200-K-1987
A2-3200-L-1988
A2-3200-W-2051
3202-S-9041
3202-T-9042
3202-U-9043
3202-X-9046
3202-Y-9047
3202-B-9050
3202-C-9051
3202-Q-9117
3202-R-9118
3202-S-9119
3202-Y-9281
3202-F-9340
3202-G-9341
3202-H-9342
3202-W-9461
3202-Y-9463
PAGE
11
11
11
18
9,18
4
8,18
13
5
5
13
5
13
13
13
5
13
13
13
13
5
5
13
5
5
13
5
5
5
5
5
5
5
5
5
13
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
PART NUMBER
3202-S-9483
3202-T-9484
3202-U-9485
3202-X-9488
3202-C-9597
3202-E-9599
3202-G-9601
3202-J-9604
3202-N-9608
3202-Q-9611
3202-S-9613
3202-U-9615
3202-W-9617
3202-Y-9619
3202-R-9638
3202-Q-9845
3202-S-9847
3206-Q-1343
3206-S-1345
3206-T-1346
3206-U-1347
3206-W-1349
3206-Y-1351
3206-Z-1352
3206-A-1353
3206-C-1563
3206-C-1823
3206-D-1824
3206-M-1885
3206-P-1888
3216-Q-4359
3216-S-4361
3221-P-1004
A-3226-M-1053
A-3226-P-1056
A-3226-T-1112
A-3226-Z-1222
A-3226-B-1224
A-3226-D-1226
A-3226-N-1236
A-3226-V-1296
A-3230-T-1034
A-3230-U-1035
A-3230-V-1036
A4-3235-C-1719
A6-3235-C-1719
A12-3235-C-1719
A13-3235-C-1719
A6-3235-E-1721
A8-3235-E-1721
A14-3235-E-1721
A15-3235-E-1721
PAGE
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
9,19
9,19
4
11
11
20
4
4
4
11
4
8,18
8,18
18
16
14
16
14
16
14
16
14
PART NUMBER
A2-3235-Y-1741
A3-3235-Y-1741
A-3235-S-1839
A1-3235-S-1839
A2-3235-S-1839
A3-3235-S-1839
A8-3235-S-1839
A9-3235-S-1839
A10-3235-S-1839
A11-3235-S-1839
A12-3235-S-1839
A-3235-U-1841
A1-3235-U-1841
A2-3235-U-1841
A3-3235-U-1841
A8-3235-U-1841
A9-3235-U-1841
A10-3235-U-1841
A11-3235-U-1841
A12-3235-U-1841
A-3235-W-1843
A1-3235-W-1843
A2-3235-W-1843
A3-3235-W-1843
A8-3235-W-1843
A9-3235-W-1843
A10-3235-W-1843
A11-3235-W-1843
A12-3235-W-1843
A2-3235-V-1920
A3-3235-V-1920
A8-3235-V-1920
A9-3235-V-1920
A10-3235-V-1920
A11-3235-V-1920
A12-3235-V-1920
A18-3235-V-1920
A-3235-N-1938
A1-3235-N-1938
A-3235-Q-1941
A1-3235-Q-1941
A-3235-W-2025
A4-3235-T-2152
A10-3235-T-2152
A11-3235-T-2152
A2-3235-J-2168
A3-3235-J-2168
A4-3235-J-2168
A5-3235-J-2168
A1-3235-K-2169
A2-3235-K-2169
A2-3235-L-2170
PAGE
14
16
14
15
7,14
7,15
7,14
7,15
7
7,17
7,17
14
16
7,14
7,15
7,14
7,15
7
7,17
7,16
14
16
7,14
7,15
7,14
7,15
7,15
7,16
7,16
7,14
7,15
7,14
7,15
7
7,17
7,17
16
14
16
14
16
4
8,17
7
7,15
7,15
7,15
7,17
7,17
15
17
7,14
PART NUMBER
A3-3235-L-2170
A4-3235-L-2170
A5-3235-L-2170
A2-3235-M-2171
A3-3235-M-2171
A4-3235-M-2171
A5-3235-M-2171
A2-3235-N-2172
A3-3235-N-2172
A6-3235-N-2172
A7-3235-N-2172
A-3235-D-2188
A2-3235-D-2188
A4-3235-D-2188
A10-3235-D-2188
A11-3235-D-2188
A2-3235-Y-2261
A-3235-N-2380
A2-3235-N-2380
3237-W-1167
A-3261-L-350
3261-A-1067
3261-R-1084
3266-M-897
3266-C-1095
3266-F-1020
3266-Q-1161
3278-D-82
3278-S-305
3278-Y-1117F
3278-A-1119
3280-V-8394
3280-Z-8398
SA1-3280-U-8861
3296-F-188
3296-W-1167
3296-Z-1170
3297-E-1019
3297-N-1158
A-3297-T-1346
A-3297-U-1347
A-3303-P-1030
3892-N-4902
572
580
592A
594A
3920
39520
39590
47620
47686
PAGE
7,14
7,17
7,17
7,14
7,14
7,17
7,17
14
14
17
17
14
14
7,17
7
7,15
17
4
4
8,19
4
8,18
5
18
6
8,18
5
18
8,18
8,18
4
9
9
9,19
18
9,18
9,18
20
20
4
4
9
6
21
21
21
21
4
21
21
21
21
PART NUMBER
55200C
55206C
55437
72212C
72225C
72487
141DYS28A
148DYS28A
148TYS32-4A
155DYS28-1A
155DYS32-6
155DYS32-6A
155NYS28-5A
155TYS32-2A
155TYS32-6A
16N-4-5621X
16N-4-6251
16N-4-6261
16N-4-6271-1
16N-4-6281X
16N-4-6291X
16N-4-6431-1X
16N-4-7341-1X
16NYS38-8A
16TYS28-13A
16TYS32-32A
16TYS32-76
16TYS32-76A
16TYS32-86A
170TYS32-2
170TYS32-2A
170TYS38-4A
176N-4-531
176N-4-541-1X
176N-4-541X
176NYS32-3A2
176NYS38-14A
176TYS32-3A1
176TYS38-27A
17N-4-6321
17N-4-6331
17N-4-6391X
17N-4-6411X
17N-4-7181X
17N-4-7631-1X
17N-4-7641-1X
17NYS28-43A
17NYS32-100
17NYS32-100A
17NYS32-99
17NYS32-99A
17TYS28-57A
PAGE
12
11
11,12
6,12
11
6,11,12
29
29
29
29
29
29
29
29
29
27
27
27
29
27
27
29
29
27
29
29
29
29
29
29
29
29
27
29
27
27
27
29
29
27
27
27
27
27
29
29
27
27
27
27
27
29
55
PART NUMBER
KIT 2321
KIT 2322
KIT 2389
KIT 2396
KIT 2405
KIT 2413
KIT 2420
KIT 2429
KIT 2431
KIT 2445
KIT 2446
KIT 2482
KIT 2488
KIT 2511
KIT 2512
KIT 2522
KIT 2541
KIT 2636
KIT 2637
KIT 2638
KIT 2647
KIT 2648
KIT 2662
KIT 2664
KIT 2665
KIT 2668
KIT 2686
KIT 2691
KIT 2696
KIT 2703
KIT 2704
KIT 2705
KIT 2706
KIT 2709
KIT 2730
KIT 2743
KIT 2747
KIT 2750
KIT 2751
KIT 2752
KIT 2753
KIT 2754
KIT 2755
KIT 2756
KIT 2758
KIT 2759
KIT 2760
KIT 2761
KIT 2819
KIT 2824
KIT 2825
KIT 2833
56
PAGE
40
40
41
41
41
41
42
42
42
42
42
43
43
43
43
43
43
43
43
43
44
44
44
44
44
44
44
44
45
45
45
45
45
45
45
45
45
46
46
46
46
46
46
46
46
47
47
47
47
47
47
47
PART NUMBER
KIT 2834
KIT 2835
KIT 4007
KIT 4284
KIT 4345
KIT 4350
KIT 4356
KIT 4385
KIT 4390
KIT 4395
KIT 4396
KIT 4400
KIT 4406
KIT 4455
KIT 4461
KIT 4766
KIT RD20140NL
KIT RD20145DL
KIT RD20145NL
KIT RR22145 1873
KIT RS145 1500
KIT RS145 1547
KIT RS145 1676
KIT RS17140
LM-104949
LM-603011
LM-603049
M804010
M804049
MN-312-1
MPS 3344 145
MPS 3345 145
MS-206060-1
MS-208016-1
MS-208020-1
MS-208045-1
MS-210016-1
MS-210020-1
MS-210030-1
MS210045A-1
MS-212045-1
MS-220120-1
MWA-506
MWA-508
N-110-1
P-28-S
P-212
RV-71016
S-258-2
S-21016-2
S-21020A-2
PAGE
47
47
47
48
48
48
48
48
49
49
49
49
50
50
50
50
38
38
38
38
38
38
39
39
20
20
20
11
11
4
50
51
5
4
18
9
8,19
6
6
4
4,11
8,13
5,9
19
21
21
21
8,14
21
21
21
PART NUMBER
PAGE
NOTES
57
NOTES
58
NOTES
59
ARVINMERITOR AFTERMARKET PARTS WARRANTY
We warrant all new parts for one year from date of shipment to the buyer against defective material or
workmanship (but not against damage caused by accident, abuse or improper installation, maintenance
or repair) when such parts are used on vehicles the specifications of which have been approved by our
Engineering Department.
As the exclusive remedy under this warranty, we will, at our option, repair or replace such parts free of
charge, or take back the nonconforming parts and refund the monies paid by buyer for such parts, if
found on examination by us to be nonconforming and if any necessary return charges are prepaid.
If it is necessary to return any parts under this warranty, buyer agrees not to make any deduction on
account thereof from remittances on current accounts while claims are in the process of disposition.
Any expense incurred without our consent for repairs or replacement will not be allowed.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL SELLER
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE.
Only genuine ArvinMeritor replacement parts are covered by this aftermarket parts warranty.
60

140/141/143/144/145 Series Drive Axle Parts - Canada

Transcription

Similar documents

Out of Production Single Reduction Axles - Canada

180, 185, 186 and 380 SeRieS dRive axle PaRtS FOR Single axleS

160, 161 and 164 Series Drive Axle Parts

Rockwell RT46-160 Parts List

Meritor Product Identification Guide

160, 161 and 164 SerieS drive axle partS

MERITOR 14X™ DRIVE AXLE PARTS