2016 January - HoverTrowel

January 2016
“the contractors’ direct source
for specialty tools & equipment used
for the installation of polymer overlay flooring”
consolidation services for domestic
and international distributor/contractor shipments
www.hovertrowel.com
Introduction
Originally started as the manufacturing arm of an epoxy flooring contracting business after designing
and patenting our unique lightweight power trowel for the ever growing epoxy overlay market. Since
those early days, we have evolved into a manufacturer and distributor of specialty equipment and tools
directly related to all of the decorative and industrial polymer overlay systems on today’s market. We
realized there was a void of suppliers dedicated to this specialized trade. Finding the right tools was almost impossible and very time consuming for both small and large contractors. Over the years we have
continued to make associations with many material manufacturers who recommend our company as an
easy one stop shop for the tools and equipment necessary for quality installations.
Obviously, we haven’t forgotten the main flagship of our line and the installation of troweled toppings
that our HoverTrowel was designed to finish. The industry and the types of toppings has increased dramatically over the years and our trowel has evolved with that growth.
We have made selective strategic alliances with manufacturers of specialty, hard to find tools and equipment needed by contractors to install industrial and decorative overlay flooring systems. Because of the
agreements with these manufacturers, we have become a direct source for contractors to obtain these
specialty tools & equipment with a single order. The result is the convenience and value of being able
to make that one call or email and obtain discounted prices on these tools. With our long term contacts
and low overhead, we can beat most of our competitors prices.
Consolidation Services
HoverTrowel has been supplying contractors and distributors around the world for almost ten years.
What began as just an outlet for HoverTrowel sales overseas has become a consolidation service for
many companies, both contractors and manufacturers worldwide. In addition to our own product line, we
are direct distributors for B&W Manufacturing, BonTool, Jenny/Emglo, 3M, Midwest Rake, CS
Unitec, QuikSpray, Pearl Abrasive, Man-U-Fab, Chapin, ZipWall to mention a few and have access
to other lines of tools and equipment manufacturers. What started as a product line of support items for
our trowel, now covers surface preparation equipment from riders to hand tools. Also, those support items
needed on every installation.
We have been coordinating drop shipments of equipment and tool orders directly to job sites in North
America for many years. As the economy demands, we have contractors that travel the country doing
work for house accounts. We can set a crew up with everything they need. Over the past few years we
have been using our contacts to consolidate these specialty items in one central location and shipping
worldwide through our freight forwarder or a customers freight agency. Today HoverTrowel has customers in all fifty states and almost fifty countries.
Our goal is make those hard to find tools that make your job easier, easier to find.
Table of Contents
HoverTrowel
HoverTrowel Specifications
HoverTrowel Pneumatic Models
HoverTrowel 4 Cycle Models
HoverTrowel Blades, Floats & Accessories
Accessories & Support Items
Con’t Accessories, Roller Screed Box & Air Filter
Portable Compressors
Page 5
Page 6
Page 7
Page 8-9
Page 9-10
Page 10
Page 11
Application Tools
Spiked Rollers
Gauge Rakes
Squeegee Frames & Squeegees
Smoothing Paddles
Low & High Viscosity Mixing Paddles
Page 12
Page 13
Page 14
Page 15
Page 15
Broadcasters
Aggregate & Chip Broadcasters
Page 16-17
Mixers
Hand Held Mixers & Mixing Stations
5, 10 & 15 Gallon Batch Mixers
Self Leveler Hippo Mixers
Page 18-19
Page 19-23
Page 24-26
Other Equipment
Pumps & Mixing Pumps
Page 25-27
Surface Preparation
Hex Plate Surface Preparation Attachments
Hawk Floor Machine & Accessories
Grinders, Diamond Cup Wheels & Crack Chasers
Aurand Hand Scarifiers & Accessories
Walk-Behind Blasting, Grinding, Scarifying & Equipment
Dust Extraction Systems
Ride-On Blasting, Grinding & Scarifying Equipment
Page 30-34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40-41
Other Tools & Job Support Items
Bon Tool
Notes & Terms
Page 42
Page 43
HoverTrowel Specifications
PAGE 4
Precision Engineered Light Weight Power Trowel
The patented HoverTrowel is a lightweight power trowel originally designed to finish trowel epoxy quartz
mortars, it is now being used to finish many of today’s epoxy floor toppings, cementitious urethanes, terrazzo,
EPDM rubber, polymer modified concrete systems and other creative specialty finishes and textures as the
industry’s artisans continue to develop new overlays.
Weighing in as low as 40 lbs. the HoverTrowel’s trade driven features including finger-tip pitch control, extension handle, different blade and float options, additional weights, and even the ability to convert the same
trowel from air-powered to 4-cycle, making it the most versatile power trowel on the market. Its weight and
size allows the trowel to be used for many hand-trowel operations where conventional trowels are too heavy.
Guards
The 25" and 34" guards are interchangeable to create two different trowel paths. The smaller guard will make
it easier to trowel in tight or confined areas between vertical obstructions (like pump pedestals and tank pads),
small doorways, pool decks and other places that normally have to be hand troweled. The 34” is used for wide
open areas. The two sizes of guards and blades can be changed in a matter of minutes.
www.hovertrowel.com
HoverTrowel Specifications
PAGE 5
Overall Specifications:
U.S. Patent Number...................................................................................5,205,669
Dead Weight..............................................................................................35-45 lbs.
Trowel Path (Guard Diameters)................................................................25" & 34"
Overall Blade Diameters (Trowel Path)…...............................................24" & 33"
Blade Sizes................................................................................5" x 9.5" & 5" x 14"
Blade Pitch Control (In Degrees)...........................................................….....0 - 12
Weight Kit. ………….………………...........................................................25 lbs.
Pneumatic Model Specifications:
I-R MOO4 Series
I-R MOO7 Series
Atlas Copco Series
Maximum Power..........................................hp .41
Air Consumption @ Max Power...............18.5 cfm
Model 050 Speed @ Max Power……........175 rpm
Model 050 Stall Torque…………………..22 lb.-ft.
Model 167 Speed @ Max Power…....…..... 53 rpm
Model 167 Stall Torque…………………..78 lb.-ft.
Maximum Power..........................................hp .76
Air Consumption @ Max Power..........…....36 cfm
Model 188 Speed @ Max Power………..... 52 rpm
Model 188 Stall Torque…………...…….128 lb.-ft.
Maximum Power..........................................hp 1.09
Air Consumption @ Max Power..........…....35 cfm
Model LZB46 Speed @ Max Power……... 65 rpm
Model LZB46 Stall Torque……...……...185 lb.-ft.
4 Cycle Model Specifications:
4 Cycle Honda………………………………………….……..…….GX-35-T3
Engine Size……...…………………………….. 35 cc
4 Cycle …………………………….w/gear Reduction
Finger Tip Throttle Control…. …………0 to 120 rpm
Weight…………………………………………...7 lbs
www.hovertrowel.com
Pneumatic Models
PAGE 6
Ingersoll-Rand multi-vane air motors have been selected because of their dependability,
low maintenance and excellent design. The motors are compact, lightweight with a high
power output. Other features include cool running characteristics that minimize the effects
of hot, wet or dusty conditions. Instant starting and stopping eliminates the delays of motor
acceleration or deceleration periods, preventing electrostatic sparks and producing safe operation in hazardous conditions. It will not overheat or burn out even when overloaded or
run to stall. No hydrocarbon release makes the HoverTrowel ideal for food, beverage and
other sensitive industrial & commercial areas.
Low Torque
w/34” Guard
HoverTrowel’s standard motor for common epoxy systems is the HT-167. The higher
torque HT-188 is recommended for very resin rich or sticky systems. Other motors are
available for some flooring systems with unique physical properties and characteristics.
The motors produce a range of rpm and torque loads to suit the needs of most of the polymer toppings on the market today.
Pneumatic Models
HT-SHT
Standard Pneumatic Model
$ 5,390
Low Torque
HT-167
Moo4 - I-R Low Torque Motor
HT-EXH-A
Extension Handle
HT-G25 or HT-G34 Guards (Choice of Guard Size)
HT-TSB or HT-TSB-95 14” or 9 1/2” Tool Steel Blades (1 Set)
HT-SHT-K
Standard Pneumatic Kit
HT-167
HT-EXH-A
HT-G25 & HT-G34
HT-TSB & HT-TSB-95
HT-HT
$ 5,918
Moo4 - I-R Low Torque Motor
Extension Handle
Both Guards
14” & 9 1/2” Tool Steel Blades (1 Set Each)
High Torque Pneumatic Model
High Torque
$ 6,348
HT-188
Moo7 - I-R High Torque Motor
HT-EXH-A
Extension Handle
HT-G25 or HT-G34 Guards (Choice of Guard Size)
HT-TSB or HT-TSB-95 14” or 9 1/2” Tool Steel Blades (1 Set)
HT-HT-K
High Torque Standard Pneumatic Kit
HT-188
HT-EXH-A
HT-G25 & HT-G34
HT-TSB & HT-TSB-95
$ 6,875
Moo7 - I-R High Torque Motor
Extension Handle
Both Guards
14” & 9 1/2” Tool Steel Blades (1 Set Each)
Pneumatic Accessories
HT-EXH-A
HT-050
HT-167
HT-4-MM
HT-188
HT-7-MM
HT-AP-TA
HT-WS-25
HT-WS-18
HT-G25
HT-G34
HT-Oiler
HT-MUF-S
HT-MUF-L
HT-Flex
Extension Handle w/Air Throttle Set Up
I-R Moo4 Air Motor (Low Torque / High RPM)
I-R Moo4 Air Motor (Low Torque / Low RPM)
Moo4 Motor Mount w/Shaft Adapter
I-R Moo7 Air Motor (High Torque / Low RPM)
Moo7 Motor Mount
Pneumatic Throttle, Coil Hose & High Flow Fittings
25 lb Weight Set
18 lb Weight Set
25” Guard
34” Guard
Pneumatic In-line Globe Oiler (All Motor Models)
Small Muffler (HT-167)
Large Muffler (HT-188)
11” 3/8” Flex cable for Pitch Control Rod
$
783
$ 1,878
$ 1,878
$
211
$ 2,379
$
262
$
234
$
225
$
189
$
435
$
465
$
49
$
45
$
42
$
41
High Torque
w/25” Guard
4 Cycle Models
HoverTrowel has adapted to the industry, from its’ original air powered concept,
for indoor and sensitive environments to the low emissions 4 stroke powered
model and conversion kit. Various torque loading air motors can be used for even
the stickiest systems and any indoor or sensitive areas where sparking equipment
are not permitted. The new 4 cycle model has low emissions to be used in certain
indoor installations, but is primarily used for outdoor applications. This 35 cc
engine is extremely powerful and quiet.
PAGE 7
4 Cycle
w/25” Guard
& Weights
Pitch Control
Fingertip pitch control easily changes the blade angle from 0˚ to 10˚ while the
trowel is in operation. Although the trowel is designed for finishing and not to
move material, unevenly placed mortar can be moved slightly by increasing the
angle of attack. The pitch is also used to help the trowel mount topping mortars
when using composite blades or floats. Its’ control knob is at the top of the handle for operator convenience.
4 Cycle Models
HT-S4C
Standard 4 Cycle Model
HT-4CH-35
HT-EXH-G
HT-G25 or HT-G34 Guards
HT-TSB or HT-TSB-95
HT-S4C-K
$ 4,288
4 Cycle Honda GX-35
Extension Handle
(Choice of Guard Size)
14” or 9 1/2” Tool Steel Blades (1 Set)
Standard 4 Cycle Kit
HT-4CH-35
HT-EXH-G
HT-G25 & HT-G34
HT-TSB & HT-TSB-95
$ 4,769
4 Cycle Honda GX-35
Extension Handle
Both Guards
14” & 9 1/2” Tool Steel Blades (1 Set Each)
4 Cycle Accessories
HT-EXH-G
HT-4CH-35-TMM
HT-4CH-35
HT-4CH-T
HT-4C-MM
HT-WS-25
HT-WS-18
HT-G25
HT-G34
HT-Flex
Extension Handle w/Gas Throttle Set Up
4 Cycle Honda w/Transmission & Motor Mount
4 Cycle Honda GX-35
4 Cycle Transmission
4 Cycle Motor Mount
25 lb Weight Set
18 lb Weight Set
25” Guard
34” Guard
11” Flex Cable for Pitch Control Rod
$ 818
$ 1,118
$ 425
$ 491
$ 206
$ 225
$ 189
$ 435
$ 465
$
Back Pac
& 25” Guard
Honda GX-35
w/Transmission
www.hovertrowel.com
41
HoverTrowel Blades, Floats & Pads
PAGE 8
Blades & Floats
The blade or float selection varies depending on the topping and finish desired. The
standard blue tool steel blades are used for most applications and are the longest
wearing. The stainless steel blades are used for water based systems, where blushing
of the steel could cause a problem. These steel blades have a bend or slight radius on
the leading edge for mounting the topping and to reduce material build-up when running flat. Composite or plastic blades are used for lighter decorative toppings and will
eliminate any possible “burnishing”. Other float materials like magnesium and mahogany are used for specialized finishing. Because of its design many different materials can be special ordered. Plastic pans have also been used. All attach with quick
release snap rings and are available in two sizes to accommodate the guard sizes.
Blades & Floats
HDPE Pan
on EPDM
$/Set of Three
HT-TSB
HT-SSB
HT-HDPE
HT-NB
HT-MGF
HT-MF
14” Tool Steel Blade Set
14” Stainless Steel Blade Set (.031” Thick)
14” High Density PE Blade Set (White)
14” Nylatron Blade Set
14” Magnesium Floats
14” Mahogany Floats
$
$
$
$
$
$
149.00
158.00
179.00
198.00
132.00
112.00
HT-TSB-95
HT-SSB-95
HT-HDPE-95
HT-NB-95
HT-MGF
HT-MF-95
HT-HDPE-25
9 1/2” Tool Steel Blade Set
9 1/2” Stainless Steel Blade Set (.031”)
9 1/2” High Density PE Blade Set (White)
9 1/2” Nylatron Blade Set
9 1/2” Magnesium Floats
9 1/2” Mahogany Floats
25” Diameter Pan
$
$
$
$
$
$
$
141.00
151.00
172.00
193.00
126.00
107.00
365.00
Threaded Blocks & Diamond Pads
HT-5811-B
HT-M300-3
HT-M300-5
HT-M300-7
$/Set of Three
5/8” 11 Thread Blocks (Set of 3)
3” Heavy Duty Diamond Pad
5” Heavy Duty Diamond Pad
7” Heavy Duty Diamond Pad
Hooked Backed Pad Holders
HT-HLPH-3
HT-HLPH-5
HT-HLPH-7
$
$
$
$
194.00
148.00
293.00
498.00
$/Set of Three
3” 5/8” 11 Threaded Pad Holder
5” 5/8” 11 Threaded Pad Holder
7” 5/8” 11 Threaded Pad Holder
$ 86.00
$ 99.00
$ 146.00
“C” Clip Blade
Attachment
Pitched Blade
Angle
www.hovertrowel.com
HoverTrowel Accessories
Weights
PAGE 9
Weight Set
The weight kit can increase the overall weight of the trowel 25 lbs. at
21/2 lb. increments. Because of the various toppings and operations
being performed by the HoverTrowel, different weights are needed for
compaction to reduce grouting and topcoats. Ambient, slab, liquid &
aggregate temperatures as well as sands to liquids ratios and viscosities
can change the trowelability requiring different trowel weight.
Telescoping Handle (Both Air & Gas Models)
The handle adjusts from 42" to 64" at 6" increments is convenient for
operator preference & height. It collapses to work in confined spaces,
while it also can be lengthened to reach out onto the fresh mortar without stepping in the mortar.
Extension Handle
Hook & Loop
Disc Holder
25” Guard w/10” Metal Bonded
Diamond Hook Backed Pads
Diamond
Pads
5/8” 11 Thread Block Attachments, Diamond Pads and Holders
These attachments replace the blade blocks, having standard 5/8” 11 thread studs to accept compatible holders or cup
wheels. The heavy duty diamond pads can be used to dress or sand the cured surface for prepare prior to topcoats. Ideal
for exposing a decorative aggregate in a pigmented matrix. (Pricing on previous page)
SS-46161
SS-46171
Support Items
SS-46103
SS-46108
SS-46161
SS-46162
SS-46171
SS-46172
SS-46103
SS-46104
SS-46106
SS-46107
SS-46110
SS-46108
SS-46106
BT-84-440
BT-12-129
Spiked Shoes
Slip-On Spikeless Flats Up to Size 11
Slip-On Spikeless Flats Size 11 to 16
Slip-On Spiked Shoes Up to Size 11
Slip-On Spiked Shoes Size 11 to 16
Steel Hinged 3/4” Spiked Shoes
Steel Hinged 1” Spiked Shoes
Black Poly Pro 3/4” Spiked Shoes
Black Poly Pro 1” Spiked Shoes
Black Poly Pro 1 1/2” Spiked Shoes
Acid Resistant 3/4” Spiked Shoes
$
$
$
$
$
$
$
$
$
$
48.25
48.25
88.25
88.25
44.34
46.99
23.86
25.40
32.41
47.22
Knee Pads:
BT-12-129
BT-84-440
Hard Shell Knee Pads w/Velcro Straps
$ 15.50
Pro “Swivel Cap” Knee Pads w/Velcro Straps $ 31.20
Support Equipment
PAGE 10
The Roller Screed offers uniform placement of the mortar and
is essential for a consistent and successful mortar flooring installation. The rear outrigger wheel adds greater stability than
conventional screed boxes. Eliminating uneven placement.
The Roller Screed comes in 24" & 32" widths. The 24" wide
holds 2,325 cubic inches of mortar, while the 32" wide holds
3,810 cubic inches of mortar. The deflector plate dispenses
mortar up to 1" thick, extends past the hopper to reduce lap
marks, and easily adjusts with wing nuts. Both sizes are made
of heavy gauge steel that will tolerate flame burning to remove
cured epoxy. The handle and wheels are pinned for easy removal to clean or transport, and a utility tray conveniently
holds support tools or weights if the mortar being spread is very
heavy bodied.
24” Roller
Screed
Roller Screed Box for Consistent Mortar Placement up to 1”
HT-RS-24
HT-RS-32
24” Wide Hopper w/2,325 Cubic Inch Capacity
32” Wide Hopper w/3,810 Cubic Inch Capacity
$ 695
$ 725
Lubricant, Sealer & Acid Sprayers
HT-BG-401
HT-BG-402
HT-BG-BP-3
1 Gal Plastic Tank/Stainless Pump Rod
2 Gal Plastic Tank/Stainless Pump Rod,
4 Gal Bac Pac Tank/Stainless Pump Rod
$ 47.50
$ 48.65
$ 134.30
All Sprayers Have Viton Seals
18” Extension Wands & On/Off Locks
HT-BG-402
HT-BG-401
HT-BG-BP-3
Bullard Air Filters
Air filters are extremely important in maintaining a good working pneumatic motor by
removing condensed water and foreign particulates. The compressor-supplied air enters the filter and travels through 7 layers of filter material before exiting through the
outlet port. Both have pressure gauges, relief valves set at 125 psig and output lines of
3/8" NPT (Fem.). These stand alone filters also act as a reducer for larger incoming air
lines. The 2 line model weighs 24 lbs. while the 6 line model is 28 lbs.
Bullard Air Filters (Supplying Clean, Dry Air to Protect I-R Motors)
BAF-41P2
BAF-41P6
BAF-RC
HT-RH-50
2 Air Port Tripod w/Regulator, Check Valve & 1” Chicago Fitting
6 Air Port/Tripod w/Regulator, Check Valve & 1” Chicago Fitting
Replacement Canister
50’ (3/8”) Rubber Air Line w/High Flow Fittings
$ 433
$ 549
$ 92
$ 112
www.hovertrowel.com
BAF-41P2
Support Equipment
PAGE 11
U18KGB-PT
G5A-30P
Air Compressors
HoverTrowel has requisitioned Jenny/Emglo to manufacture portable air compressors to our specifications and Ingersoll-Rand's low torque motor requirements. These compressors are performance-rated and designed to provide years of
efficient and reliable service. There are two models are available in 230 volt and both can be configured with a threephase 460-volt motor on special order.
The Jenny model G5A-38P is a 4-cylinder, single-stage unit mounted on a 30-gallon ASME code receiver. Powered by
a 5 HP motor, this compressor delivers 18.3 CFM of air at 100 PSI. The unit is available with either a single-phase 230
volt motor or a three-phase 460 volt motor. Both single-phase and three-phase models include a motor starter and on/off
switch as standard. The 30-gallon portable design is well-balanced for ease of movement. A 3/8 NPT regulator and
gauge assembly is mounted for easy connection to the air hose. Ideal for low torque HoverTrowels.
The Jenny model J5A-30P is the biggest electric-wheeled portable compressor available. This four-cylinder pump
comes mounted on a 30-gallon ASME portable tank. Its 5 HP motor is able to deliver 25 CFM of air at 100 PSI. The unit
is available with either a single-phase 230 volt motor or a three-phase 460 volt motor. Both single-phase and three-phase
models include a motor starter and on/off switch as standard equipment. This heavy-duty 30-gallon portable unit has 10"
diameter pneumatic tires for easy movement at the job site. Ideal for low torque HoverTrowels.
The Jenny model U18KGB-PT is a tow behind cart compressor. It is powered by a Kohler 18 hp gas engine that supplies 42 cfm at 90 psi. His compressor is a two stage trailer mounted unit. With a convenient electric starter. Designed,
tested and proven to meet the demands of the construction industry. The trailer is 5 ‘6” in width and 6” 6” in length
and 4’ in height, weighing 1,125 lbs shipping weight.
** This compressor is ideal for the high torque HoverTrowel model. **
Jenny/Emglo Air Compressors (Sufficient Air to the Moo4 I-R Motors)
HT-H1407
G5A-30P
J5A-30-P-3
U18KGB-PT
Mobile 30 Gallon Tank 230v (Single Phase) 18 cfm @ 90 psi
Mobile 30 Gallon Tank 230v (Three Phase) 24 cfm @ 90 psi
Mobile 30 Gallon Tank, 18 HP Kohler Engine 42 cfm @ 90 psi
$2,230
$2,980
$6,923
610-1407
360-1123-38
360-1123 –12
Hose Reel Bolt on Kit with 100’ 3/8” Hose, 1/4” NPT
100’ 3/8” Air Hose, 1/4” NPT
100’ 1/2” Air Hose, 1/4” NPT
$ 398
$ 145
$ 175
www.hovertrowel.com
Spiked Rollers
PAGE 12
Spiked Rollers
These spiked rollers are vital to ensure proper floor coating adhesion. They are used on freshly applied floor
coatings to release trapped gas and assist in the floor leveling process. These rigid, solvent resistant, aluminum
cored polypropylene spiked rollers are available in spike lengths of 7/16”, 9/16”, and 13/16”. A variety of spike configurations per spike ring are available.
The rollers are available in widths ranging from 9” to 48”, come with a heavy-duty aluminum frame with high
grade stainless steel axles and our own unique gusset bracing. They are available with a threaded handle adapter or
with a fixed powder-coated aluminum handle. The 9” rollers come on a radial roller frame.
Aluminum Frames:
MWR-60108 9” Frame, 3/8” SS Axle w/Threaded Ferrule
MWR-60110 18” Frame, 3/8” SS Axle w/Threaded Ferrule
MWR-60113 24” Frame, 3/8” SS Axle w/Threaded Ferrule
MWR-60115 36” Frame, 3/8” SS Axle w/Threaded Ferrule
$
$
$
$
48.30
52.92
56.07
64.70
Spiked Rollers with Frames:
13/16”
Spike
7/16”
Spike
MWR-59009
MWR-59209
MWR-59218
MWR-59224
MWR-59236
9” Spiked Roller, 7/16” Spike, w/Radial Frame
9” Spiked Roller, 7/16” Spike, w/AL Frame, THA
18” Spiked Roller, 7/16” Spike, w/AL Frame, THA
24” Spiked Roller, 7/16” Spike, w/AL Frame, THA
36” Spiked Roller, 7/16” Spike, w/AL Frame, THA
$ 70.10
$ 110.02
$ 149.31
$ 181.35
$ 247.92
MWR-59458
MWR-59459
MWR-59468
MWR-59474
MWR-59486
9” Spiked Roller, 9/16” Spike, w/Radial Frame
9” Spiked Roller, 9/16” Spike, w/AL Frame, THA
18” Spiked Roller, 9/16” Spike, w/AL Frame, THA
24” Spiked Roller, 9/16” Spike, w/AL Frame, THA
36” Spiked Roller, 9/16” Spike, w/AL Frame, THA
$ 70.10
$ 111.00
$ 151.74
$ 183.13
$ 252.78
MWR-59109
MWR-59309
MWR-59318
MWR-59324
MWR-59336
9” Spiked Roller, 13/16” Spike, w/Radial Frame
9” Spiked Roller, 13/16” Spike, w/AL Frame, THA
18” Spiked Roller, 13/16” Spike, w/AL Frame, THA
24” Spiked Roller, 13/16” Spike, w/AL Frame, THA
36” Spiked Roller, 13/16” Spike, w/AL Frame, THA
$ 70.10
$ 111.97
$ 153.23
$ 187.81
$ 255.69
Threaded
Adapter
Aluminum Frames
Replacement Spiked Rollers without Frames:
Radial Frame
MWR-SA10043
MWR-SA10023
MWR-SA10025
MWR-SA10026
9” Spiked Roller, 7/16” Spike
18” Spiked Roller, 7/16” Spike
24” Spiked Roller, 7/16” Spike
36” Spiked Roller, 7/16” Spike
$ 63.11
$ 123.71
$ 136.33
$ 181.82
MWR-SA10062
MWR-SA10063
MWR-SA10064
MWR-SA10065
9” Spiked Roller, 9/16” Spike
18” Spiked Roller, 9/16” Spike
24” Spiked Roller, 9/16” Spike
36” Spiked Roller, 9/16” Spike
$ 63.11
$ 123.71
$ 136.33
$ 181.82
MWR-SA10044
MWR-SA10029
MWR-SA10030
MWR-SA10031
9” Spiked Roller, 13/16” Spike
18” Spiked Roller, 13/16” Spike
24” Spiked Roller, 13/16” Spike
36” Spiked Roller, 13/16” Spike
$ 63.11
$ 123.71
$ 136.33
$ 181.82
Gauge Rakes
PAGE 13
CAM Gauge Rakes
A patented “goof-proof” tool applies a range of materials at a precise, specified and uniform depth. For use in applying decorative concrete “toppings,” self leveling/high performance floor coating materials, and underlayments in the floor-covering markets.
CAM depth settings range from 1/32” to 1-1/2”. A must have tool for the decorative concrete and floor coating contractor. We use a
“radial” edge CAM® design which maintains uniform coating thickness, even at varying handle angles and lengths.
Head widths range from 10” (hand held) to 48”. The 24” and 36” widths are the most popular. CAM sets come in depth settings
ranging from 1/32” to 1-1/2” with the 1/8”, 1/4”, and 3/8” CAM sets being the most popular. Each CAM has multiple contact points
of the same depth, when worn down, loosen the wing nut and rotate the CAM for a fresh contact point of the same depth setting.
The CAM Gauge Rake is available with a milled threaded handle adapter. The 10” CAM Rake is used for small areas and counter
tops and has its own fixed handle with grip.
Cam Gauge Rakes:
MWR-57000
Cam Rakes
MWR-57030
12” Aluminum Cam Gauge Rake
MWR-57000
24” Aluminum Cam Gauge Rake
MWR-57010
36” Aluminum Cam Gauge Rake
MWR-57020
48” Aluminum Cam Gauge Rake
7000 Wire Gauge Rakes:
MWR-58609
24” Aluminum Wire Gauge Rake
MWR-68611
Replacement Wire Set of Three
$ 51.56
$ 59.74
$ 67.93
$ 76.93
$ 77.01
$ 8.70
Sled Style Gage Rakes:
MWR-58420
MWR-58425
24” Sled Style Gauge Rake
36” Sled Style Gauge Rake
$ 35.69
$ 50.43
Sled Style Gauge Rake
Replacement Cam Sets (Sets of Two)
MWR-CAM-1
MWR-CAM-2
MWR-CAM-3
MWR-CAM-4
MWR-CAM-5
1/16” Cam Set
1/8” Cam Set
3/16” Cam Set
1/4” Cam Set
5/16” Cam Set
MWR-CAM-6
MWR-CAM-8
MWR-CAM-10
MWR-CAM-16
MWR-CAM-24
$ 21.30
These self-adjusting gauge rakes have been used for many years.
Although not as precise as our other gauge rakes shown, they
are value priced, will allow you to achieve a reasonably level
depth when installing more cementitious materials, and do allow
you to more easily move over rougher surfaces. Styles and colors may vary, but the “sled-style” self-adjusting features of these
gauge rakes will be “standard” characteristics of anything available in this category.….and our handle adapter is “threaded.”
3/8” Cam Set
1/2” Cam Set
5/8” Cam Set
1” Cam Set
1 1/2” Cam Set
MWR-58420
All Have Threaded Adapters
Wire Gauge Rake
The Wire Gauge Rake is used to apply self-leveling floor coatings and
lower viscosity materials. It is far superior to pin-type gauge rakes on the
market. The strong spring-steel wires are formed in a “radial” or loop
fashion. This eliminates chatter and vibration common with pin-type
gauge rakes. The multiple contact points make this tool an excellent
choice when working on pitted or uneven surfaces, as some of the
points will maintain the desired level or depth of application even at
varying handle angles and lengths. The adjustable aluminum gate or
bar can be set to any desired thickness from 0” to 5/8”. Replacement
wires are available. Ordering replacement wire sets is encouraged.
MWR-58609
Wire Rakes
Squeegees & Frames
PAGE 14
MWR-78708
Hand-Held
Squeegee
Aluminum Squeegee Frames:
MWR-78000
MWR-78010
MWR-78015
MWR-78020
MWR-78040
16” Squeegee Frame, w/Threaded Ferrule
24” Squeegee Frame, w/Threaded Ferrule
30” Squeegee Frame, w/Threaded Ferrule
36” Squeegee Frame, w/Threaded Ferrule
48” Squeegee Frame, w/Threaded Ferrule
Squeegees in 25’ Rolls:
MWR-79405
MWR-79410
MWR-79415
MWR-79420
MWR-79425
MWR-79430
MWR-79505
MWR-79510
MWR-79515
MWR-79520
MWR-79525
MWR-79530
Neoprene (Black)
Neoprene (Black)
Neoprene (Black)
Neoprene (Black)
Neoprene (Black)
Neoprene (Black)
EPDM (Gray)
EPDM (Gray)
EPDM (Gray)
EPDM (Gray)
EPDM (Gray)
EPDM (Gray)
$
$
$
$
$
32.35
35.58
39.80
42.51
51.10
Notched on Both Sides
No Notch
1/8” Notch
3/16” Notch
1/4” Notch
3/8” Notch
1/2” Notch
No Notch
1/8” Notch
3/16” Notch
1/4” Notch
3/8” Notch
1/2” Notch
$ 63.45
$ 109.88
$ 109.88
$ 109.88
$ 109.88
$ 109.88
$ 187.39
$ 246.28
$ 246.28
$ 246.28
$ 246.28
$ 246.28
Threaded
Adapter
Red Rubber Notched on One Side Only
MWR-79605
MWR-79610
MWR-79615
MWR-79620
MWR-79625
MWR-79630
Solvent Resistant (Red)
Solvent Resistant (Red)
Solvent Resistant (Red)
Solvent Resistant (Red)
Solvent Resistant (Red)
Solvent Resistant (Red)
No Notch
1/8” Notch
3/16” Notch
1/4” Notch
3/8” Notch
1/2” Notch
$ 183.31
$ 209.83
$ 209.83
$ 209.83
$ 209.83
$ 209.83
Squeegees
Application squeegee frames are the standard in the Protective Coating industry. These “clamp-style” frames make it
easy to change blades. The unique gusset bracing and threaded handle adapter are the most durable on the market. The solvent-resistant aluminum frames are available with a with a threaded handle adapter. These are quality frames
that can be used over and over again, requiring only the purchase of replacement blades. Application squeegee blades are
available in Neoprene, EPDM and Red Rubber. The Neoprene and EPDM blades are “reversible” (notched on both
sides). The Red Rubber blades are notched on one side and no-notch (flat) on the other side. Each type is available in a
variety of head widths and notch sizes. Neoprene blades are best for water-based or oil and petroleum based coating
products. EPDM blades are best for solvent-based coatings and clear coats. The 2” Red Rubber blades are solventresistant and offer more flexibility in any floor coating application use. They are “non-marking” and display good solvent tolerance.
Smoothing Paddles
PAGE 15
Flexible Blade Smoother
Threaded
Adapter
This flexible 24” x 5” rounded corner steel blade is bent and angled to maximize
blade contact with a range of surface coating materials. This smoothing tool can
also serve as a spreading tool and even a surface preparation tool. It is most often
used when troweling and/or smoothing overlay/underlay material (toppings) of a
more cementitious composition prior to surface treatment. The blade is contained
in a durable aluminum frame with our superior gusset bracing system. This tool
comes with a threaded handle adapter. Straight blade smoothers are also available.
Flexible Smoothing Paddles (24” x 5” .028 Tool Steel) w/THA
MWR-78902
MWR-78906
MWR-78906
24” Flexible Smoother (Square End)
24” Flexible Smoother (Round End)
$ 47.38
$ 47.18
“Magic Trowels”
Magic Trowel
The Magic Trowel is used to smooth the surface of applied
cementitious overlays, particularly overlays of a more fluid
consistency. A very effective finishing tool capable of creating a flawless surface.
MWR-47415
MWR-47416
MWR-47417
MWR-47418
MWR-47419
12” Magic Trowel
18” Magic Trowel
22” Magic Trowel
24” Magic Trowel
26” Magic Trowel
$ 21.21
$ 23.80
$ 26.10
$ 29.75
$ 32.05
Smoother/Spreader
MWR-78930
23 1/2” Smooth-Spreader w/THA
$ 36.90
MWR-47417
MWR-78930
Smoother/Spreader
This tool is lightweight, yet durable. It features a 22” frame with a 23-1/2” x 2” heat-treated steel blade, fan-shaped for next to
wall coverage, and a reversible “threaded” handle adapter assembly allowing for use as a smoother or spreader. Spread material with
the blade in a vertical position.
Low Viscosity Mixers
MWR-47425
MWR-47432
MWR-47442
MWR-47434
MWR-47422
The Pro-Grade mixers are the choice of many contractors. These mixers have low shear for minimal air entrapment while mixing. The Pro-Grade mixers are
constructed of quality powder-coated steel and are available in 2 sizes; a 1-2 gallon paddle with a 3-1/2” turbine
style head on a 19-3/4” x 5/16” diameter hex shaft or a 2
-5 gallon paddle with a 4-3/4” turbine style head on a 23
-1/2” x 3/8” diameter hex shaft.
Jiffy Mixers are also available in two sizes; a 1-2 gallon
and a 2-5 gallon. The mixers are made of 304 stainless
steel and fit all 1/4” - 3/4” chucked power tools. The
blade actions are characterized by a smooth, thorough,
non-air sucking and non-splashing action.
High Viscosity Mixers
MWR-47444
Low Viscosity Mixing Paddles
MWR-47432
MWR-47434
MWR-47442
MWR-47444
1-2 Gallon Small Jiffy Mixer
2-5 Gallon Large Jiffy Mixer
1-2 Gallon Small Pro-Grade Mixing Paddle
2-5 Gallon Large Pro-Grade Mixing Paddle
$ 19.96
$ 58.45
$ 16.57
$ 24.03
High Viscosity Mixing Paddles
MWR-47422
MWR-47425
Small 5 Gallon Mixing Paddle
Large 5 Gallon Mixing Paddle
$ 21.22
$ 20.82
These mixers are used by those in the decorative concrete, stamping and terrazzo markets. The “football”
shaped cage configurations are ideal for mixing more viscous “topping” and impregnated and cementitious materials. The larger 10” x 6” head is designed for barrel mixing. The smaller 6” x 4” head is ideal for 5 gallon quantities. Both mixers effectively remove air without splashout. Both have an overall length of 26” with a hex shaft.
Aggregate Broadcasters
PAGE 16
Aggregate Broadcaster
QS-AB
QS-AB-220v
$ 2,335
$ 2,518
The AG-Blower will place quartz aggregate, sand,
fillers or non-skid granules at a rate up to 33# per
minute into unsent epoxy, cement or polyester base
coats. The specially designed steel and rubber
wheels allow the AG-Blower to be moved over the
unset basecoat without leaving undesirable
tracks. The applicator can cover 2500 feet with out
moving the AG-Blower! This unit will save time,
labor and materials.
13’-15’ Flex Hose
Features:










2 speed high volume blower
300# hopper capacity
Balanced tilt-back design
115 VAC, 50-60 hz, 9.8 amps
20 feet of 16/3 wire with ground
Heavy Duty Construction
Low/No maintenance
Quick and easy fill
Ease of mobility
25"wide - 42" high, 32" long
PVC Straight Pipe
The Stone Blower will handle fine sand up to No. 4 stone and has controllable air
volume foe even distribution. The balanced, close coupled hopper and blower are
easy to handle. It also sets upright on the floor for stability when filling.
Hand Stone Blower
QS-HSB





$ 1,180
Mixes, pours and spreads material
quickly with excellent control
Handles a wide range of construction
compounds
Easy operation by one person
Reduces time, effort and labor costs
Easy to clean out
Vinyl Chip Broadcasters
PAGE 17
Commercial Chip Sprayer
QS-VCS
QS-VCS-220v
$ 2,840
$ 3,011
The Commercial Chip Sprayer features a
2-speed 2-3HP blower with 150/196 cfm of
air with a velocity up to 33,570 fpm. The
transfer and metering of the chip is accomplished with a positive, but variable speed
auger feed powered by a separate gear reduced motor. The fast application of chips
into wet resin eliminates a stop and go procedure. Both motors operate on 110 VAC.
Hand Held Chip Sprayer
QS-HHCS
$ 445
The redesigned handheld Chip Sprayer permits the even distribution of large and small,
variegated or mono colored chips for the seamless application. Even distribution will allow
for less product waste, and less clean up. The
low pressure/high volume blower reduces chip
breakage, sometimes found with hand application. The overall length is less than 18”, allowing this unit proper operation in confined or
open application areas. Extremely high application rates are normal with the Chip Sprayer,
and the higher production will pay for this unit
with one large project.
Handheld Mixers & Paddles
PAGE 18
Hand Held Pneumatic Mixers
Hand Held Mixers & Mixing Stations
CSU-EHR-18-S
CSU-EHR-20-R
CSU-EHR-20.1-RS
CSU-EZR-22 R
CSU-EHR-23/1.4 S
CSU-EHR-23/1.3 RS
CSU-EHR-23/2.4 S
CSU-HHP-1111
CSU-HHP-1112
CSU-HHP-1113
CSU-RST-91
CSU-25GP-WD
Hand Held Mixer, 0-5450 RPM, 9.5 Amp (w/ WG 120 Paddle)
Hand Held Mixer, 0-580 RPM, 10.5 Amp (Paddle not Included)
HER 20 R Hand Held Mixer and MG 140 paddle
Hand Held Mixer Twin Mixer 0-450 RPM, 10.5 Amp (w/Paddles)
Hand Held Mixer, 100-275 RPM, 14.5 Amp (Paddle not Included)
EHR 23/1.3 R and MG 160 Paddle
Hand Held Mixer, 0-250/0-580 Speed, 14.5 Amp with MG 160 Paddle
Pneumatic, 0-400 RPM, 1.5 HP, 49 cfm @ 90 psi (No Paddle)
Pneumatic, 0-230 & 200-420 RPM, 1.5 HP, 49 cfm @ 90 psi (No Paddle)
Pneumatic, 0-200 & 250-450 RPM, 2.3 HP, 67 cfm @ 90 psi (No Paddle)
Mixing Stand, w/Swivel Clamp, ht: 65”, Base: 20” x 28”, Stroke: 40”, wt 649 lbs
Mixing Stand, Holds 5 Gal. Pails, ht: 35”, length: 26”, width: 14”, wt. 64 lbs
$ 330
$ 395
$ 420
$ 975
$ 460
$ 498
$ 650
$ 1,675
$ 1,840
$ 2,173
$ 695
$ 575
Hand Held Mixing Paddles, Extensions & Chuck
CSU-RG-120
CSU-WG-120
CSU-WG-135
CSU-WG-160
CSU-MG-120
CSU-MG-140
CSU-MG-160
CSU-MG-235
CSU-MGV-120
CSU-MGV-140
CSU-MGV-160
CSU-3161
CSU-MH-240
CSU-32210000
CSU-32220000
CSU-32142999
CSU-32339000
Helical Mixing Paddle for Low Viscosity EHR 18-S (4.5” dia.)
Helical Mixing Paddle for Medium Viscosity EHR 18-S (4.5” dia.)
Helical Mixing Paddle for Medium Viscosity EHR 20-S & 1111 & 1112 (5.4” dia.)
Helical Mixing Paddle for Medium Viscosity EHR 23-R & 1113 (6.25” dia.)
Mortar Mixing Paddle for Mortar for EHR 20R & 1111 & 1112 (4.5” dia.)
Mortar Mixing Paddle for Mortar for EHR 20R & 1111 & 1112 (5.6” dia.)
Mortar Mixing Paddle for Mortar for EHR 23-R & 1113 (6.25” dia.)
Mortar Mixing Paddle, 9 1/4” dia. for EHR 23-R (9.25” dia.)
Stainless Steel Mixing Paddle for EHR 18-S (4.5” dia.)
Stainless Steel Mixing Paddle for EHR 20-R (5.4” dia.)
Stainless Steel Mixing Paddle for EHR 23-R (6.25” dia.)
Twin Mixer Paddle Set for EZR 22-S (4.75” dia. Each w/8.25” Total)
“H” Style Fold & Stir, 9 1/4” for EHR 20-R & EHR 23-R Mixers
Spindle Extension, 9”, M14, for All EHR Mixers & Paddles
Spindle Extension, 15”, M14, for All EHR Mixers & Paddles
5/8” Three Jaw Chuck & Adapter, M14 for All EHR Mixers
Adapter Holder for 21-S (Required to Use w/RST-91)
RG
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
31
28
34
45
31
37
47
82
120
148
175
155
93
21
37
45
78
Low Viscosity
Ideal for paints, lacquers, chemicals and other types
of thinner coatings.
WG
Medium Viscosity
Ideal for tenacious materials such as plaster, mortar,
lime, gypsum, floor compounds, granulates and
quartz-filled epoxies.
MH
RG
MG
High Viscosity
Extra-robust stirring of finished mortar &plaster,
floor compounds, refractory cements, insulating materials and quartz-filled epoxies.
MH
Fold & Stir
Mixing and shearing engineered concrete overlays
and comparable products. Virtually eliminates the
injection of air into the system.
WG
MG
Handheld Mixers & Paddles
Mixer EHR 20 S
The standard mixer with
high reliability for construction. Ideal for medium
to high viscosity powder
and liquid materials such as
finish plaster, latex, mortar,
epoxy, leveling compounds
and other materials in
batches up to 120 pounds.
Capacity: 3 bags, 25 gal.
Output: Up to 900 lbs/hour
Power:10.5 Amp/110 Volt AC
Free Speed: 900 RPM
Load Speed: 0-580 RPM
Weight: 11.5 lbs.
Suitable Paddles:
WG 135 (5.4” dia.)
MG 140 (5.6” dia.)
Mixer EHR 23/1.2R
The powerful, professional
unit for tough, continuous
use. A powerful motor allows mixing of up to 200
pounds of high viscosity
materials ranging from epoxy, mortars, plasters and
cement to quartz-containing
resins and flooring compounds, as well as insulation
and other materials.
Capacity: 5 bags, 35 gal.
Output: Up to 1800 lbs/hour
Power: 14.5 Amp/110 Volt AC
Free Speed: 325 RPM
Load Speed: 100-275 RPM
Weight: 15 lbs.
Suitable Paddles:
WG 160 (6.25” dia.)
MG 160 (6.25” dia.)
Mixer EZR 22
Quick, thorough mixing with
twin paddles. This dual-paddle
mixer stirs heavy materials faster
and more efficiently, A thorough, well-blended mixture
results when mixing two or more
component materials, as well as
heavy products such as flooring
compound, epoxies, mortars,
fiber-filled cements, ceramics,
granulates, pastes and putties.
The blades rotate in opposite
directions, eliminating counter
torque and making the unit easy
to handle – even while mixing
the most demanding of materials.
Each paddle is 4 ¾” dia. with 8
¼” working width.
Mix up to 200 pounds.
Capacity: 5 bags, 25 gal.
Output: Up to 1200 lbs/hour
Power:10.5 Amp/110 Volt AC
Free Speed: 680 RPM
Load Speed: 0-450 RPM
Weight: 15 lbs.
Paddle Pair: No. 31610000
PAGE 19
25G-WD
Model 25GP-WD
EHR
20-R
EHR
23-R
Designed for easy setup, with no
clamping required. Has rear
wheels for extra portability. Ideal
for use with 5-gallon pails and EHR
20 R, EHR 23/1.3R or EZR 21 S
mixers, as well as all the pneumatic
mixers listed on page 13.
EZR
22
5 Gallon Batch Mixer
Specifications of Model QS-60
Maximum Fluid Mix Capacity: 5 Gallons
Maximum Mix Capacity: 50 lbs.
Recommended Mix: 40-50 lbs.
Motor Size: 1/2 HP
Mix Pail Speed: 60 RPM
All-Steel Construction – Powder Coated
Direct Drive — Built for Continuous Duty
“L” Paddle Included as Standard with Mixer
Direct Drive 5 Gallon Stationary Batch Mixer:
HT-QS-60 Direct Drive ,5 Gallon, 1/2 hp , 60 rpm
HT-QS-L “L” Paddle
HT-QS-K “K” Double Fin Paddle
$1,180
$ 75
$ 85
5, 10 & 15 Gallon Batch Mixers
PAGE 20
These extremely versatile direct-drive mixers have dozens of applications. They provide thorough and accurate batch mixing of liquids, powders, pastes, slurries, and granular materials.
The rotating drum container is removable and easy to clean.
The stationary mixing paddle provides both radial and axial action, and it scrapes the side
and bottom of the drum for complete mixing. The wheels and handle enable easy movement.
Paddles Must be Purchased Separately
All Mixers are Available with 220 volt, 50 hz Motors
Call or Email to Request Pricing
KOL Batch Mixers:
HT-K1-60
HT-K2-60
HT-K3-60
HT-K4-60
HT-K5-60
HT-K1-60-M
HT-K2-60-M
HT-K3-60-M
HT-K4-60-M
HT-K5-60-M
5 Gallon
5 Gallon
10 Gallon
10 Gallon
15 Gallon
5 Gallon
5 Gallon
10 Gallon
10 Gallon
15 Gallon
1/2 hp
1 hp
1/2 hp
1 hp
1 hp
1/2 hp
1 hp
1/2 hp
1 hp
1 hp
Stationary
Stationary
Stationary
Stationary
Stationary
Mobile
Mobile
Mobile
Mobile
Mobile
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
60 rpm
$ 1,240
$ 1,487
$ 1,348
$ 1,612
$ 1,756
$ 1,345
$ 1,595
$ 1,456
$ 1,720
$ 1,865
KOL Paddles:
HT-SB-75
HT-SB-710
HT-SB-715
HT-EP-105
HT-EP-110
HT-EP-115
HT-TP-105
HT-TP-1010
Single Blade Paddle
Single Blade Paddle
Single Blade Paddle
Erie Paddle
Erie Paddle
Erie Paddle
Tremco Paddle
Tremco Paddle
5 Gallon
10 Gallon
15 Gallon
5 Gallon
10 Gallon
15 Gallon
5 Gallon
10 Gallon
$
$
$
$
$
$
$
$
88
92
98
123
129
136
134
142
KOL Replacement Drums:
HT-KQ-5
HT-KQ-10
HT-KQ-15
Mobile
5 Gallon Drum
10 Gallon Drum
15 Gallon
12” Dia. x 13” High
14” Dia. x 17” High
16” Dia. x 22 1/2 “ High
$ 33.00
$185.00
$195.00
Erie
Tremco
Stationary
Drop Load Batch Mixers
PAGE 21
Stationary
Stainless
Drum
KOL Batch Mixers:
HT-K10-60
HT-K10-60-M
HT-K15-60
HT-K15-60-M
10 Gallon
10 Gallon
15 Gallon
15 Gallon
1 hp
1 hp
1 hp
1 hp
Stationary
Mobile
Stationary
Mobile
60 rpm
60 rpm
60 rpm
60 rpm
$
$
$
$
2,060
2,229
2,223
2,392
$
$
$
$
$
92
129
142
98
129
KOL Paddles:
HT-SB-710
HT-EP-110
HT-TP-1010
HT-SB-715
HT-EP-115
Single Blade Paddle
Erie Paddle
Tremco Paddle
Single Blade Paddle
Erie Paddle
10 Gallon
10 Gallon
10 Gallon
15 Gallon
15 Gallon
All Mixers are Available with 220 volt, 50 hz Motors
Call or Email to Request Pricing
Mobile
Off Loads Directly into a Wheelbarrow
QuikBatch Mixer
PAGE 22
This Batch Mixer just may be the most extremely versatile direct drive batch mixer on the market today.
Designed with the contractor in mind. It can be set to accept 5 gallon (both metal & plastic pails, nested or
straight sided), 10 gallon and 15 gallon drums. These drums have convenient handles for ease in transport.
The height of the this mixer can be changed quickly and easily to change the mixing height and the resulting dispensing height. It can easily be tipped to dispense the mortar into a pail, wheelbarrow or even directly on the floor. Its tilt mechanism, tilt arm center of gravity makes it easy for an operator to tilt and
dispensed the mixed mortar to tip the drum It can be fitted with four casters or rear casters with steel front
wheel that can be removed and burnt for cleaning.
Being a direct drive, there are no drive belts or chains It also has a convenient side mounted timer that allows mixing time to be set up to 15 minutes. It has a snap fitted protective to cover. Its on-off switch is
mounted directly on the motor for EZ access. Designed by a manufacturer with more than 35 years of
mixing experience for all industries, but the main concentration has been in the polymer blends. Its robust
construction is built for long service life at top efficiency.
All Mixers are Available with 220 volt, 50 hz Motors
Call or Email to Request Pricing
10 Gallon Drum Shown in
Two Different
Height Settings
and Wheel Set-Ups
www.hovertrowel.com
QuikBatch Mixer
PAGE 23
Quik Batch Mixers:
HT-QB-DLM
Drop Load Mixer
(All Mixers 1 hp, 110v)
4 Caster/2 Steel Wheels
$ 2,575
Can Accept 5, 10, 12 & 15 Gallon Drums
Paddles & Drums Sold Separately
15 Minute Timer
Paddles:
HT-QB-SB-5
HT-QB-MB
Single Blade 5 Gallon
Multiple Fin Paddle
10, 12 & 15 Gallon
$
$
68
146
5 Gallon
5 Gallon
10 Gallon
12 Gallon
15 Gallon
$
$
$
$
$
12
22
184
230
255
Height Adjustment
Pails & Drums:
HT-QB-5-P
HT-QB-5-S
HT-QB-10-SSD
HT-QB-12-SSD
HT-QB-15-SD
Plastic
Steel
Stainless Steel
Stainless Steel
Stainless Steel


Attachment & Accessories:
HT-QB-PC
HT-QB-Timer

Pouring Chute
Replacement Timer
$
$
131
122






Easy Tilt Handle Bar


Pouring Chute
Interchangeable Drum Capacity
Adjustable to Accept 5, 10, 12 & 15
Gallon Drums
Easy Adjustable Legs w/Wheels
Different Height Applications
E-Z Dump Discharge
Easy Tip Handle w/Three Settings
E-Z Pour Directly into a Wheelbarrow
E-Z Material Off Loading
High Torque Gearbox
65 rpm
Rugged Design
Overbuilt for Continued Operation
Electric 110 volt
High Torque Industrial Motors
Convenient Side Mounted Timer
Protective Covered 15 Minute
Sealed Stainless Drive Shaft
Low Maintenance, Long Life
E-Z Maneuverability
Steel Front Wheels with Rear Casters
Product Mixing Versatility
Epoxy Mortars, (Quartz, Stone, Sand)
Cementitious Urethanes, EPDM
Urethanes, Cement and More!
www.hovertrowel.com
Porta Mix Hippo
PAGE 24
Level Floor Model
All Models Come with
Both Helical Paddles
Mixing Position
Off Loads Directly on
Floor or into Pails
Pouring Position
A PORTA MIX Hippo Mixer: Cement screeds, grout, mortar, texture coatings, sealants, adhesives and many
other products can be quickly and effectively mixed without difficulty. Many users have reported a major reduction in physical effort and time when using the Hippo. The mixer’s easy tilt feature allows contractors to
mix, transport and pour materials with unparalleled ease. With a mixing capacity of roughly 18 gallons (or
240 lbs), its high torque, 16 amp two speed motor makes it a natural for mixing self-leveling materials more
productively, while reducing operator fatigue.
The Hippo will rewrite the "rules" for mixing these types of flooring systems. Typically, manufacturers' suggest an 800 (or higher) rpm mixer to "cut" the polymer to produce the desired cross-linking. The Hippo's helical mixing paddle with shear bars and its drum shape create a vortex to provide sufficient lifting and shearing
action unmatched when mixing these batch sizes. The larger diameter paddle provides increased periphery
speed, eliminating any possible flash curing of increased temperatures created by higher rpms.
Features a balanced, easy-tilt cradle that allows accurate placement of material. Easy-roll mobility lets user pour and spread material at the same time. Mixes cement screed, grout, mortar,
texture coatings, sealants, adhesives and more.
Capacity:
Motor:
Weight:
Suitable Paddle:
15-1/2 gallons (mix volume)
21-1/2 gallons (brim full volume)
1800W 2-speed (140 rpm and 470 rpm)
99.21 lb.
TW200D or TW200 (7.87" dia.)
CSU-32
CSU-HHP-1118-M
Porta Mix Hippo
PAGE 25
Hippo Mixing Units (Both TW200 & TW200D Paddles Included):
HT-PMH-80F-RL
HT-PHM-80X-RL
HT-PMH-80F-Air
HT-PHM-80X-Air
Hippo Porta-Mix w/EHR 32/2.4 Motor, Floor Casters, Liner & TW225 & TW225D Paddles
Hippo Porta-Mix w/EHR 32/2.4 Motor, Rough Terrain, Liner & TW225 & TW225D Paddles
Hippo Porta-Mix w/Pneumatic Motor, Floor Casters, Liner & TW225 & TW225D Paddles
Hippo Porta-Mix w/Pneumatic Motor, Rough Terrain, Liner & TW225 & TW225D Paddles
$ 2,520
$ 2,620
$ 4,830
$ 4,910
Replacement Motors:
CSU-32/2.4P
CSU-HHP-1118-M
Electric Motor 16 Amp/1800 Watt/110 volt
Pneumatic Motor 2.2 HP, 67 cfm @ 90psi
$ 878
$ 3,133
Replacement Helical Paddles:
CSU-TW225
CSU-TW225-D
Single Half Batch Mixing Helix, 27” long, 9” Diameter
Double Full Batch Mixing Helix, 27” long, 9” Diameter
$ 320
$ 330
Replacement Liners:
CSU-PH-704
CSU-PH-705
Replacement Rimless Canister/Drum
Replacement Liner for Rimless Canister/Drum
$ 340
$ 111
Conversion Pneumatic Wheel & Leg Kit:
CSU-PH203
CSU-PH207
“F” Series Caster Wheel Set w/Hardware
“X” Series Pneumatic Wheel/Axle/Feet Set





Mixes, pours and spreads material quickly with excellent control
Handles a wide range of construction compounds
Easy operation by one person
Reduces time, effort and labor costs
Easy to clean out
All Models Come with
Both Helical Paddles
Off Loads Directly into Pails
TW-200D
$ 198
$ 588
Rough Terrain Model
TW-200
8” x 15”
8” x 8”
Mixing Position
Porta Mix Hippo
PAGE 26
PORTAMIX PMH 70F-RL
Multiple Batch Mixing with Removable Liner
With Rimless Bucket and
Removable Liner
4 Casters for Level Floor use
Mixing multiple batches is easier and faster with
the new, removable liner and rimless bucket system.
• Mix consecutive batches without downtime
• Resilient, pliable liner is easily cleaned
• Alternating liners prevents cross contamination
• Extends life of bucket
PORTAMIX PMH 70X-RL
With Rimless Bucket and
Removable Liner
2 Tires for Rough Terrain use
Pricing on Previous Page
Level Floor Model
After mixing the first batch, the
liner can be removed and
cleaned. To speed up
production, a second liner can
be used while the first liner is
being cleaned. The use of a liner
also helps to prevent cross
contamination and minimizes
wear to the HIPPO bucket,
extending its life.
The removable liner and
rimless bucket system
allows dried compounds to
be easily broken and
cleaned out.
All Models Come with
Both Helical Paddles
Off Loads Directly
on Floor
Concrete Mixing Pumps
PAGE 27
Mix, pump and spray most pre-blended cementitious construction materials with a single easy
to use machine. Self-leveling underlayments and
toppings, concrete repair mortars, grouts and
fireproofing are all suited applications.
MP-25
Performance Is Directly Related To Material Consistency, Hose Diameter & Pumping Distance
Main Pump Motor
Water Pump
Pumping Output
Pumping Pressure
Pumping Distance
Pumping Height
Hopper Loading
Hopper Capacity
Weight
Dimensions
Power Requirement
MP-25 Standard Output
4KW (5.4HP)
.45HP
110 bags (50 cuft/hr)
425 PSI
200’ +
60’ +
42”
5 cu.ft.
425 lbs
60”L x 52”H x 32”W
220v, 30 amp, 1 Phase
MP-25 High Output
5.5KW (7.5HP)
.45HP
200 bags (100 cu.ft./hr)
425 PSI
200’ +
60’ +
42”
5 cu.ft.
505 lbs
60”L x 52”H x 32”W
220v, 30 amp, 3 Phase
Call for Pricing
On all Mixers & Pumps
www.hovertrowel.com
U Blend Mixer
PAGE 28










Tub Dimensions:
31” x 14”
6.12 cu.ft. Total Volume
4+ cu.ft. Capacity
Dump Height:
40” Max - 25” Min


4+ Balance Mixing Blades
E-Z Replaceable Rubber Wipers
Adjustable Legs w/Wheels
Set for Different Height Applications
E-Z Dump Bottom Discharge
No Tip Drum or Grate Removal
Lower Height Top Loading
E-Z Material Loading Over Pumps
High Torque Gearbox
Various Gear Ratios Available
Rugged Design
Overbuilt for Continued Operation
Pneumatic, Electric or Hydraulic
High Torque Industrial Motors
Single or Variable Speed Option
RPM Set for Slow or Fast Mixing
Sealed Stainless Drive Shaft
Low Maintenance, Long Life
Safety Lid Power Shut Off
Lifting Lid Engages Safety Switch
E-Z Manual Portability
Simple Tip Back & Roll
Product Versatility
Plaster/Cement w/wo Aggregates or
Fibers, Fireproofing, Textures,
Stucco and More!
Shown w/Pump
Mixing Blades
U-Blend Mixers:
HT-UB-1
HT-UB-2
HT-UB-3
HT-UB-4
HT-UB-VS
HT-UB-3A
HT-UB-3B
1725 rpm, 1.5 hp, 110/208-220 VAC, 60 HZ, 32 to 1 Gearbox, 55 Final RPM
Designed for Plaster, Fireproofing, Acoustics, Light Cement Formulas
1725 rpm, 3 hp, 220 VAC, 60 HZ, 32 to 1 Gearbox, 55 Final RPM
Designed for Heavy Cement Coatings With Fiber and Aggregates, Repair Mortars,
Stucco and Shotcrete
2000+ rpm, 4+ hp, 80 CFM Required Minimum, 40 to 1 Gearbox, 50-55 Final RPM,
Designed for Repair Mortars, Shotcrete, Stuccos, Aggregated Cement Formulas
With or without Fibers, Pool Plaster
2850 rpm, 1.5 hp, 220 VAC, 50 HZ, 44 to 1 Gearbox, 60-64 Final RPM,
Designed for Plaster, Fireproofing, Acoustics, Light Cement Formulas
Variable Speed Drive
Lubricator (#27085) & Moisture Trap (#27090) W/Mount for HT-UB-3
Pneumatic Speed & Direction Control, Forward, Reverse, Start-Stop Includes Air
Supply Lines to Air Motor Muffler, Exhaust, Speed Control
www.hovertrowel.com
$3,390
$4,775
$3,290
$3,640
$1,050
$ 325
$ 405
Epoxy Pump
PAGE 29
•
•
•
•
•
•
•
The Carrousel Pump® is the application of the peristaltic or squeeze principle, similar to the human
digestive system. The Carrousel Pump™ squeezes the material through its system, forcing material
forward.
The Carrousel Pump™ has specially designed Quik-Flo couplings. These special couplings lower
pumping pressures and horsepower requirement.
The Carrousel Pump™ can run dry indefinitely without damage, unlike the progressive cavity
pumps or rotor/stator pumps.
Parabolic hoppers are designed for easy flow of materials, and have no corners to clog.
Specially designed 8-jet venturi spray nozzle for fiber filled coatings eliminates clogging and plugs.
Cleaning is extremely simple. A sponge ball is inserted into the hopper, and is pushed through by
the pumping action with clean water or solvent.
Powerful constant torque electric, pneumatic or hydraulic motors are available. These powerheads
allow for variable speed and application rates.
Shown w/Mixer
Call for Pricing
On all Pumps
www.hovertrowel.com
PAGE 30
FLOOR PREPARATION SYSTEM
ATTACHES EASILY TO A FLOOR MACHINE.....MAKING IT A GREAT
VERSATILE TOOL TO HAVE ON THE TRUCK!
The Pearl Hexpin(R) System has revolutionized floor preparation. Use
the standard Hexpin(R) Plates or Hexpin(R) Blocks with our patented
system of interchangeable Hexpins(R) for grinding, sanding, polishing
and coating removal. Pearl’s unique spring-based technology allows
the Hexpin(R) attachments to float easily over rough surfaces while the
fluted plate design helps maintain dust control. Engineered for use on
standard floor buffers and dual-headed diamond grinders, the Pearl
Hexpin(R) System is a tool that gives you choices. When looking to increase productivity and profitability, look to Pearl Professional Products for true craftsmanship… THE PEARL HEXPIN(R) SYSTEM.
HEX Plate w/Carbide
Cutters on Hawk
Floor Machine
www.hovertrowel.com
PAGE 31
HEXPLATES W/SUPERCLUTCH FOR 15” HEXPLATE (for 17” Floor Machine)
FULLY ASSEMBLED HEXPLATES
HEX17CLTH
15” Plate W/Clutch Only
HEX1764CLT
15” Plate W/Clutch & 6 Diamond Pads
HEX1712CLT
15” Plate W/Clutch & 12 Green Diamond Pins (General Purpose)
HEX1712CCLT
15” Plate W/Clutch & 12 Gold Diamond Pins (Course Diamonds)
HEX1712BCLT
15” Plate W/Clutch & 12 Blue Diamond Pins (Hard Bonded)
HEX17CBDCLT
15” Plate W/Clutch & 12 Carbide Pins
HEX17QCCLT
15” Plate W/Clutch & 6 Quick Change Pins
HEX17FTCCLT
15” Plate W/Clutch & 6 Turbo Cut Pins
HEX17BPDCLT
15” Plate W/Clutch & 6 Hook & Loop Backing Pads
HEX17CBD3CLT
15” Plate W/Clutch & 12 Carbide #3 Cutter Pins
HEX17CBD4CLT
15” Plate W/Clutch & 12 Carbide #4 Cutter Pins
HEX1706EZCLT
15” Plate W/Clutch & Diamond EZ and 6 Pads
HEX1712EZCLT
15” Plate W/Clutch & Diamond EZ and 12 Pads
HEXPLATE ATTACHMENTS FOR 15” HEXPLATE
$ 613
$1,477
$1,227
$1,377
$1,363
$1,079
$ 719
$ 792
$ 823
$1,180
$1,254
$1,224
$1,670
Diamond Pads
Pearl has a NEW AND IMPROVED Diamond Segmented Pad (HEX4PAD) designed to
be used on the 15” Hexplate TM. They are made with an overall larger grinding/sanding
area which increases production. When attached to the 15” Hexplate TM, the new and improved Diamond Segmented Pads extend past the edge of the plate allowing the operator to
GRIND OR SAND RIGHT UP TO THE EDGE OF THE WALL.
All Pearl’s diamond segmented pad attachments are engineered with an overall larger
grinding surface area than the competition. This extends the life and improves the allaround grinding speed and performance. Can be used wet or dry on concrete surfaces for
grinding and coating removal.
HEX1764
HEX1764CLT
HEX4SEG-MFD
HEX4PAD
HEX4HLDR
HEX4HRDW
15” Plate W/6 Diamond Pads
15” Plate W/Clutch & 6 Diamond Pads
Complete Diamond Pin Holder W/Diamond Pad
Diamond Pad Only – 4 Segments (Includes Nuts/Washers)
Pad Holder Only (Includes Springs & Nuts/Washers)
Diamond Pad Hardware (Includes 2 Springs/3Nuts/3 Washers)
$1,304
$1,477
$ 160
$ 141
$ 24
$
8
DIAMOND HEXPIN ATTACHMENTS
Designed to be used for grinding and sanding concrete surfaces. Pins offered in GREEN
-general purpose, GOLD-heavy duty and BLUE-hard bonded pins for abrasive surfaces.
Diamond Pins
HEX1PNG
HEX1PNC
HEX1PNB
Replacement General Purpose Green Pins
Replacement Course Gold Pins
Replacement Hard Bonded Blue Pins for Abrasive Surfaces
$
$
$
52
68
68
HEX-CUP ATTACHMENT
Specifically engineered 4” diamond cup wheels provide superior grinding on flat slab
surfaces. Unique beveled edge design allows these Cup Wheel Hexpins ® to guide easily
over slab concrete surfaces.
HEX1CUP
QUICK CHANGE HEXPIN
4” Cup Wheel (Course)
HEX15811
Quick Change Hexpin ®
$ 147
$ 25
®
A unique Hexpin attachment with 5/8-11 reverse thread for use with a variety of Quick Change
Hexpin ® attachments.
Diamond Cups Wheels
& Quick Change Pin
PAGE 32
TURBO-CUT HEXPIN ATTACHMENT
Specially engineered for coating removal where abrasive grains are more effective than customary scraping methods. Suited for light scarification of coated
surfaces, removal of urethane and rubberized coatings, sealers and light rust
from metal surfaces.
HEX1FTC
FSP4516
FPD50
FPD70
HX1FTCHL
HX1FTCNT
HX1FTCSC
Turbo Cut TM Hexpin® (Complete)
4-1/2” X 7/8 C16-Turbo Cut TM Disc
Replacement Plastic Backup Pad
Heavy Duty Replacement Plastic Backup Pad
Turbo Cut TM Holder W/Nut
Nut for Turbo Cut TM Holder
Screw for Turbo Cut TM Nut
$ 37.20
$ 8.50
$ .85
$ 1.50
$ 24.55
$ 11.50
$ 1.10
Turbo Cut Wheels
3” DIAMOND DISC PADS HOOK & LOOP ATTACHMENT
Proprietary Hybrid Resin Technology. Special non-marking resin. Thick
crack resistant base extends pads life. Beveled edge improves polishing
capability.
Hook & Loop Pad & Quick Change Pin
HEX1BPD3
FSPD3050
FSPD3100
FSPD3200
FSPD3500
FSPD31000
FSPD32000
FSPD3BUFF
3” Backup Pad
3 x 50 Grit (Olive)
3 x 100 Grit (Black)
3 x 200 Grit (Red)
3 x 500 Grit (Beige)
3 x 1000 Grit (White)
3 x 2000 Grit (Royal Blue)
3 x BUFF (Navy Blue) *
* Use Dry on Dark Color Stones – Wet on Light Color Stones
HEXPIN DIAMOND EZ PADS
Specially engineered for sanding, light grinding and floor preparation. Can be
used on wet or dry concrete with spring mounted springs allowing for uneven
surfaces. Being high enough to provide clearance above carbide chips, there is
no need to remove all the chips. Only 6 of these EZ pads are needed to perform very efficiently and effectively with reduced downtime.
HEX1EZHLD
HEX1EZPAD
HEX3CRBH
HEX3SCRE
HEX1SPNG
Holder w/Diamond EZ Pad & Screw (Complete)
Hexpin (R) Diamond EZ Pad
Carbide Holder W/Screw for Diamond EZ Pad
Replacement Screw for Diamond EZ Pad
Heavy Duty Spring
$ 74.00
$ 52.00
$ 29.00
$
.85
$ 3.55
$ 14.50
$ 21.30
$ 21.30
$ 21.30
$ 21.30
$ 21.30
$ 21.30
$ 21.30
PAGE 33
CARBIDE HEXPIN ATTACHMENT
Designed and fitted with a replaceable, four sided, abrasion resistant, carbide
insert. Use for scraping and removal of a variety of coatings and paints from
concrete surfaces.
HEX1CHIP CARBIDE CHIP – CHIP #1
Use in removing thinset, mastics, glue, rubber or foam backed carpet residue, dirt
buildup, ice & paint.
HEX1CARB
HEX1CHIP
HEX1CRBH
HEX1SCRE
Carbide Holder W/#1 Chip & Screw (Complete)
#1 Replacement Carbide Chips
Carbide Holder for #1 Chip
Replacement Screw for #1 Chip
$ 39
$ 13
$ 27
$ .85
HEX3CHIP CARBIDE CHIP – AGGRESSIVE CHIP #3
Useful when taking up unusually difficult-to-remove mastics and glue. The chip
has a hole to secure the chip when working in rough conditions.
HEX3CARB
HEX3CHIP
HEX3CRBH
HEX3SCRE
Carbide Holder W/#3 Chip & Screw (Complete)
#3 Replacement Carbide Chip W/Screw Hole
Carbide Holder W/Screw for #3 Chip
Replacement Screw for #3 Chip
Chip #1
$ 49
$ 18
$ 29
$ .85
HEX3CHIP CARBIDE CHIP – VERY AGGRESSIVE CHIP #4
Best used to remove thin paint and epoxy from concrete, but works well for other
concrete surface removal applications, So aggressive, we recommend that it only
be used with the Hexpin ® Super Clutch TM plate.
WITH 8 SHARP EDGES!
HEX4CARB
HEX4CHIP
HEX4CRBH
HEX4SCRE
Carbide Holder W/#4 Chip & Screw (Complete)
#4 Replacement Carbide Chip W/Screw Hole
Carbide Holder W/Screw for #4 Chip
Replacement Screw for #4 Chip
Chip #3
$ 46
$ 19
$ 28
$ .85
Chip #4
REPLACEMENT PARTS FOR PLATES AND BLOCKS
A.
B.
C.
D.
E.
F.
G.
HEX1CLP
HEX1SPNG
HEX1SLV
HEX1SPN
HEX1SCRE
HEX1HRDW
HEX1EZPIN
Clutch Plate
Heavy Duty Spring
Replacement Carbide Sleeve
Spring
Screw
Nut & Lock Washer
EZ Lock Pin
$ 21.65
$ 3.55
$ 20.55
$ 3.50
$ .85
$ 7.25
$ 1.50
15” HexPlates w/SuperClutch for 17” Floor Machine
Hex Plates Available without Super Clutch
Call for All Individual Accessories & Parts Pricing
www.hovertrowel.com
PAGE 34
Application Chart
Hawk Floor Machine
PAGE 35
17” HAWK BUFFER HEAVY DUTY FLOOR MACHINE
 1-1/2 HP DUAL CAPACITOR
 BALDOR AC MOTOR AND SDP (SEVERE DUTY PLANETARY)
 3 IDLE GEAR BOX—160 RPM
 LONG 50’ (14-3) CORD
 IDEAL WITH 15” HEXPLATES
Weight Post &
10lb Weight
Sanding Plate & Pad
17” HAWK BUFFER HEAVY DUTY FLOOR MACHINE
HEX1BFRHK
17” Hawk Buffer Heavy Duty Floor Machine
1.5 HP – 160 RPM
$1,191
Shown w/
HexPlate andCarbide Chips
17” HAWK BUFFER ACCESSORIES
BUFAW-1
BUFTNK02
HP0008
HEX10LBS
Add-A-Wheel
Solution Tank
Weight Post
Approx. 10 lb. Weights
$ 68
$ 109
$ 84
$ 44
BUF-VAC FOR 17” BUFFERS
BUFVAC1
BFVCADP1
BFVCRB1
Buf-Vac TM
Vacuum Hose Port
Rubber Vacuum Shield
$ 152
$ 106
$ 72
16” SANDING PLATE ATTACHMENT
BUFSPL16
BUFFELT16
16” Sanding Plate Attachment
16” Replacement Felt Pad
Hawk Buffer
BUFVAC Assembly
$ 261
$ 24
Solution Tank
Grinders & Diamond Wheels
PAGE 36
5" Heavy-Duty Concrete Surface Grinders - 14 amp
Ideal for removing coatings and residual mud from concrete floor and masonry surfaces. An optional walk-behind cart allows for comfortable operation of the concrete grinder. This model has a
removable front dust guard for finishing concrete floors into the corners and edges, which allows
for grinding right up to the wall.
5" Heavy-Duty Concrete Grinders - 16 amp
Use this concrete grinder to remove epoxy, glue, paint and other hard coatings and to
smooth rough surfaces or clean concrete before applying new paint or coatings. This
grinder is solidly built with a 16 AMP motor to enable a high load capacity.
7" Heavy-Duty Concrete Floor Grinders - 20 amp
This concrete grinder provides fast removal of epoxy, glue, paint and other hard coatings. It can also be used to smooth rough surfaces or clean concrete before applying
new paint or coatings. The walk-behind operation is comfortable when working on
large areas - eliminates kneeling and bending.
Concrete Grinders
EBS 125.5
EBS 125.5 D
EBS 125.5 DC
EBS 125.5 DCV
EBS 1802.1 D
EBS 180 H
EBS 125.5R
EBS 125.5RC
253.115
37106
253.117C
Concrete Grinder 5”, 14 Amp, 10,000 RPM (w/o grinding wheel)
Concrete Grinder EBS 125.5 with Premium Diamond Grinding Wheel (253 115)
Concrete Grinder EBS 125.5 with Premium Diamond Grinding Wheel (253 115), Cart 37210
Concrete Grinder EBS 125.5 with Premium Diamond Grinding Wheel (253 115), Cart 37210 & Vac CS 1225
Concrete Grinder 5”, 16 Amp, 10,000 RPM w/Diamond Wheel
Concrete Grinder 7”, 20 Amp, 9,500 RPM w/Diamond Wheel
Finishing Grinder 5”, 14 Amp, 6,000-10,000 RPM w/o Carbide Wheel
Finishing Grinder 5”, 14 Amp, 6,000 RPM w/Carbide Grinding Wheel
5” Diamond Grinding Wheel, Premium (for EBS 125)
5” Carbide Grinding Wheel, (EBS 125-R)
7” Diamond Grinding Wheel, Premium (for EBS 180)
$ 460
$ 585
$ 860
$ 1,450
$ 770
$ 975
$ 649
$ 770
$ 134
$ 130
$ 270
Diamond
Crack Chaser
CDH
PV
CSH
SW
Diamond Cup Wheels
PV04CDH
PV07CDH
DC4CDH
DC7CDH
DC4CSH
DC7CSH
SW04C
SW07C
T4CHEFX
T4MHEFX
Double Row Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
Double Row Diamond 7” x 5/8” - 11 Thread (8,500 rpm max)
Double Row Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
Double Row Diamond 7” x 5/8” - 11 Thread (8,500 rpm max)
Swirl Segmented Coarse Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
Swirl Segmented Coarse Diamond 7” x 5/8” - 11 Thread (8,500 rpm max)
Heavy Duty Turbo Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
Heavy Duty Turbo Diamond 7” x 5/8” - 11 Thread (8,500 rpm max)
Speed Driver EFX Coarse Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
Speed Driver EFX Medium Diamond 4” x 5/8” - 11 Thread (13,700 rpm max)
$
$
$
$
$
$
$
$
$
$
43
93
82
168
85
106
244
324
101
101
Diamond Crack Chaser (5/8” - 11 Thread)
V904M
V700M
4” x 5/8” - 11 Thread (70 degrees x 1/2”w, 13,700 rpm max)
7” x 5/8” - 11 Thread (70 degrees x 1/2”w, 8,500 rpm max)
$ 167
$ 297
Hand Scarifiers
PAGE 37
KP-5E
M-51
K-71E
Aurand manufactures two sizes of pneumatic powered tools for your specific
purpose. The “K” series tool is a small lightweight tool suitable for handwork and
our “M” series tool is a larger tool suitable for heavy duty or floor work.
See the chart below to determine which tool fits your particular application:
MP-6E
Model
Cleaning
Area
Power
Supply
HorsePower
Weight
Price
Model
w/Vac
Price
Cutter
Bundle
Sets
Bundle
Price
K7-1
5” Wide
115 v
1/4
9 lbs.
$610
K7-1V
$660
#674
2
$51
K7-2
5” Wide
230 v
1/4
9 lbs.
$632
K7-2V
$684
#674
2
$51
KP-5
5” Wide
Air
3/4
6 lbs.
$855
KP-5V
$908
#674
2
$51
K7-1E
8” Wide
115 v
1/4
11 lbs.
$655
K7-1EV
$722
#674
4
$51
K7-2E
8” Wide
230 v
1/4
11 lbs.
$670
K7-2EV
$736
#674
4
$51
KP-5E
8” Wide
Air
3/4
9 lbs.
$917
KP-5EV
$979
#674
4
$51
M5-1
8” Wide
115 v
1/2
21 lbs.
$836
M5-1V
$917
#90M
2
$110
M5-2
8” Wide
230 v
1/2
21 lbs.
$874
M5-2V
$940
#90M
2
$110
MP6
8” Wide
Air
2 1/2
16 lbs.
$1,017
MP6V
$1,102
#90M
2
$110
M5-1E
12” Wide
115 v
2 1/2
28 lbs.
$983
M5-1EV
$1,060
#90M
4
$110
M5-2E
12” Wide
230 v
2 1/2
28 lbs.
$1,017
M5-2EV
$1,097
#90M
4
$110
MP-6E
12” Wide
Air
2 1/2
24 lbs.
$1,117
MP-6EV
$1,221
#90M
4
$110
*** Carbide Cutter Bundles are available for all M Series Models
#90M-C
$365
Vac Dust
Hoods
Blasting, Grinding Equipment
PAGE 38
The SB-6 portable, light weight shot blast machine features an easy to adjust handle
allowing you to push or pull the SB-6. This feature allows you the ability to blast in
any corner and under shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. With the
liners and housing on the SB-6 incorporated into one part, it gives you the ability to
replace any and all wear components. By interchanging the rear liner, the SB-6 can
blast 4 and 5 inch line stripes in just minutes. When connected to the A-101 Pulse Vac
you achieve a virtually dust free shot blast system.
The SB-6 is the unit for all your small shot blast jobs.
SC-9 & SC-8.5 Scarifiers
With the easy change cage assembly and choice of hardened steel cutter, carbide
cutters or special milling flails with tungsten blades, you can change the function of
the machine in only minutes. Uses of the SC-9 range from traffic line removal, sidewalk repairs, coating preparation, removal of epoxy and urethane coatings, creating
non-slip surfaces, grinding high spots to cleaning floors of dirt and oils.
Call for Pricing on all
Component & Accessories
Scarifier
5.5 HP Honda
Includes Cutters
$2,782
The DG-16 walk behind diamond grinder is unlike any other diamond grinder on the market today. What sets this floor grinder
apart from all the others is the floating grinding head and the specially designed shroud that keeps the machine virtually dust free
when connected to the A-101 Pulse Vac along with removing all
material off the floor reducing clean up cost. We started with a
diamond and worked our way up. After several scraped designs
and years of research and development, we are extremely happy
with the end product. This is not a converted terrazzo grinder or
wood sander, this machine was designed for coating removal to
high gloss polishing on totally dry concrete. With the one piece
16” rubber mounted grinding head (no planetary gears) that is
adjusted up and down by spring pressure, you have infinite adjustability. The diamond segments can easily be changed from
course diamonds for coating removal to fine resin pads for polishing. The response we have been receiving from our customers
with the DG-16 is “Total amazement”. The production is two to
three times faster and has a more consistent profile than any other
diamond grinder they have used.
Diamond Grinder
5 HP - 220 volt
Includes Diamonds
$3,825
Diamond Grinder
11 HP - Honda
Includes Diamonds
$4,130
www.hovertrowel.com
Dust Collection Equipment
PAGE 39
Call for Pricing on All Accessories & Component
Unlike other industrial vacuums, the A-101 Pulse Vac is designed specifically for
the removal of fine dust and powders without clogging. This is the only portable
vacuum in the market today with a built in compressed air pulsation system that
continuously cleans the filter. With a two stage vacuum motor, the A-101 Pulse
Vac is one of the most powerful vacuums available that operates on 120 volts.
Your reduction in filter cleaning labor combined with its adaptability to all
shrouded equipment, the A-101 Pulse Vac is the most essential and recommended
vacuum by contractors today.
Pulse Vac
5 HP - 220 volt
2” or 5” x 15’ Hose
$6,875
Pulse Vac
120 volt - 13.5 amp
2” x 15’ Hose
$2,110
The A-202 Pulse Vac has been designed for the contractor who requires a large
amount of dust containment. The A-202 has two primary filters that are pulsed
clean with a reversed charge of compressed air every 6 seconds to give you continuous vacuum. The collector can hold a full 30-gallon drum of material up to
600 lbs. The A-202 comes with casters on the drum giving you easy mobility to
any dumpster along with an easy bolt down drum strap allowing use with any 30gallon drum. The A-202 Pulse Vac offers a 5” hose allowing larger air volume
and two additional 2” hose inlets for smaller tools. Optional motor choices of
120V, 220V, and gasoline engine. With your reduction in filter cleaning labor
combined with its adaptability to all shrouded equipment, the A-202 Pulse Vac is
the most essential and recommended dust collector system for today's contractor.
The A-404 Pulse Vac has been designed for the contractor who requires
large amounts of dust containment. The A-404 has four primary filters that
are pulsed clean with a reversed charge of compressed air every 6 seconds
to give you continuous vacuum. The A-404 Pulse Vac has two 5” hose
inlets allowing large air volume and an adapter pipe to run five 2” hoses for
smaller hand tools. The A-404 collector can hold a full 55-gallon drum of
material up to 1000 lbs. It has an easy latch down drum strap allowing you
to use any 55-gallon drum. The operator has the ability to lift the collector
drum with a forklift truck through the chain pivots for easy dumping. Optional motor choices of 220V, 460V, and gasoline engine. With your reduction in filter cleaning labor combined with its’ adaptability to all shrouded
equipment, the A-404 Pulse Vac is the most essential and recommended
dust collector system for today’s contractor.
Call for Pricing on All
Accessories & Components
Pulse Vac
5 HP - 440 volt
5” x 15’ Hose
$8,350
www.hovertrowel.com
Blasting, Grinding Equipment
PAGE 40
After years of research, development and testing, B&W Manufacturing, Inc. has
produced the only mid-sized ride on shotblast - scarify - diamond grind - polish
machine in the market today.
The SCB-1200 w/BH-12 Shotblasting Head Attachment gives you mobility and versatility by being
able to switch between heads in just minutes. The SCB-1200 features a removable dust containment
box with wheels for ease of dumping. One handed operation controls for raising and lowering heads,
speed and shot/diamond engage control. The BH-12 Shotblasting Head Attachment is a state of the
art blast head design giving you quick blast wheel changes and a feathered blasting edge which enables
each successive path to overlap without excessive penetration omitting the “striping effect”. The finished surface is ideal for thin-set applications or for use with clear coatings along with the power to
give you an aggressive shot blast profile when needed.
SCB-1200-E-DG
25” Diamond
Grinder Attachment
25 HP - 220/440 3 phase
Call for
Special Pricing
SCB-1200-E-BH
Scarifier Attachment
25 HP - 220/440 3 phase
Included 240 Steel Cutters
www.hovertrowel.com
Blasting, Grinding Equipment
PAGE 41
DG-50 Diamond Grinder/Polisher is unlike any other diamond grinder on the market today. What
sets this floor grinder apart from all the others is the floating grinding heads and the specially designed shroud that keeps the machine virtually dust free when connected to the SCB-1600 along with
removing all material off the floor reducing clean up cost. The technology started with our DG-16
that developed into the DG-25 and now the DG-50 with four independent heads that gives a grinding
width of 50 inches. This is not a converted terrazzo grinder or wood sander. This machine was designed for coating removal to high gloss polishing on totally dry concrete. With quadruple, one piece
16” rubber mounted grinding heads (no planetary gears) that are adjusted up and down by air pressure, you have infinite adjustability. The diamond segments can easily be changed from course diamonds for coating removal to fine resin pads for polishing.
SCB-1200-E-BH
Shot Blaster Attachment
25 HP - 220/440 3 phase
The SCB-1600 with the BH-16 Shotblasting Head Attachment has a 16” wide blast path eliminates “zebra
stripes”. The BH-16 Blasthead provides a feathered blasting edge enabling each successive path to overlap
without excessive penetration omitting the stripping effect which is common to other competitive machines.
The finished surface is ideal for thin-set applications or for use with clear coatings. Designed with the operator in mind, the SCB-1600 with the BH-16 Shotblasting Head Attachment uses one control for all machine
operations along with power steering, adjustable seat with arm rest and full visibility in front and behind either head attachment. Any operator will feel comfortable running the SCB-1600.
With a state of the art scarifying head that is self leveling to automatically adjust itself to different contours
of the floor or pavement. You achieve an accurate removal of thin mill coatings to 1/4” overlays. The SCB1600 with the SC-16 Scarifier Head Attachment is ideal for use on rubber membranes, mastics, epoxy
coatings, and line stripes. The SCB-1600 with the SC-16 Scarifier Head Attachment will put you ahead of
the competition with its high production rates and large vacuum/collector system that eliminates dust and
removes all material from the surface it is scarifying. Versatility is the key to the SCB-1600 with the SC-16
Scarifier Head Attachment. With quick change cages allowing to go from steel to carbide cutters and to
different cutting width cages in just minutes.
www.hovertrowel.com
PAGE 42
Contractors Pricing
10 - 20 % Discount !!!
Bon Tool is a major manufacturer and distributor of quality hand tools for not only decorative concrete and
masonry, but asphalt, drywall, plaster, stucco as well as general construction gear having cross over tools
that come in handy in our target decorative flooring and countertop markets.
As a first tier distributor HoverTrowel can offer Bon’s entire product line to our contractor at discounted
prices. Our low overhead and working relationship allows us to offer these quality tools at attractive discounts. Simply visit www.bontool.com, email us your list of the items from over 400 pages of products.
We offer contractors 10 to 25% discounts.
Concrete Tools:
Epoxy Tools, Hand Trowels, Edgers, Bull Floats, Hand Floats, Knee Boards, Concrete Placers, Chutes, Screeds, Rebar Tools, Rub Bricks, Steel Stakes, Tampers, Concrete Forms, Mixers
Decorative Concrete Products:
Texturing Tools, Imprint Rollers, Stencils, Concrete & Counter Top
Forms, Mixers and Many of the Tools Used Everyday to Complete Your Jobs
www.bontool.com
Notes
PAGE 43
Terms & Conditions of Sale:
Major credit cards accepted and wire transfer prior to shipment for overseas shipments
Damage in shipping MUST be caught at delivery & addressed immediately with the carrier
20% Restocking Charge for all Items Returned New and in Original Packaging
Returning Used Equipment will be Handled on a Case by Case Basis
All return of goods must have a written approval prior to return shipping
Prices, terms and conditions are subject to change without notice.
HoverTrowel, Inc.
Distribution & Training Center
New Morgan Corporate Center
75 Grace Blvd, Building E
Morgantown, PA 19543
(610)-856-1961
www.hovertrowel.com
sales@hovertrowel.com
“the contractors’ direct source
for specialty tools & equipment used
for the installation of polymer overlay flooring”
JANUARY 2016