Baum Tools Unlimited 2012 Mercedes Benz Special Tool Catalog

Transcription

Baum Tools Unlimited
2012 Mercedes Benz
Special Tool Catalog
Ordering Information &
General Policy
The tools in this catalog comply, where possible, with the numbering system of BMW are organized by Repair
Groups as found in the Mrcedes Benz Factory Service and Repair Manuals and Workshop Information System.
Most Tool numbers in this catalog reference the factory Mercedes Benz tool number
Tools displayed in the catalog are only a portion of our stock of special tools for Mercedes Benz. Please refer to
factory manuals or call us for information on ALL tools available for these vehicles.
Baum Tools attempts to carry the complete line of OEM issued tools. If you cannot find a particular tool or a tool for a
specific application, please call and inquire. We continually update our product line as new tools become available.
Our engineering and development departments are constantly on the alert for new and improved tool designs. We give
all suggestions and recommendations careful consideration. We also have contact with a variety of International sources
and maintain a flexible stock in order to satisfy your needs.
STATEMENT OF POLICY
Orders may be placed by Phone, Fax, E-mail or mail.
Every effort is made to process each order at the time it is received.
Backordered items are retained on backorder until shipment is possible.
Please specify if backorders are NOT to be carried forward.
Shipping: All shipments are F.O.B. our warehouse Sarasota Florida USA, via U.P.S. Ground, 3 Day Select, 2 Day
Air, Next Day Air, Express International or Expedited International where available. Guaranteed AM delivery and
Saturday delivery is also available upon request.
Payment: We accept Visa, MasterCard, American Express, Discover, Baum Tools Credit Card, PayPal and Electronic
bank transfer.
Prices: Prices are subject to change without notice. Please confirm pricing at the time the order is placed. If ordering by
E-mail, Mail or Fax please include a phone number so we may confirm availability and pricing.
Returns: All errors in shipping must be reported within 48 hours of receipt. All returns are subject to a 20%
restocking charge, when no error on our part exists. No return may be made without an authorization number. All
returns must contain a copy of the original invoice. Refunds are made on the first of the following month. Special order
Items are non returnable.
Warranty: New, currently manufactured and cataloged tools carry a warranty against defects in materials and
workmanship for a period of 12 months from the date of delivery. This warranty does not apply to any tool or part
of tool which has been altered in any way without the express permission of Baum Tools, the use of power tools in
conjunction with any Baum Tool not specifically specified for use with power tools and tools used for jobs other than that
specified.
Obsolete and Used Tools carry no warranty and are sold on an AS IS basis regardless of
manufacturer.
800-848-6657 USA/Canada
941-927-1414 Intl.
941-927-1612 Fax
Sales@baumtools.com
www.baumtools.com
Baum Tools Unlimited Inc. © 2011
Mercedes Benz
Timing Kits
#B271-0140
Camshaft Alignment Kit
W271
#B112-0001K
Camshaft Alignment Kit
M112, M113
#156-0061
Mercedes Benz AMG 156 Timing Kit
#B111-0315KIT
Mercedes Benz Lock Set
includes #’s 112-340, 601-0240, 112.0315
Fits engines: 102, 103, 104, 111, 112, 113, 119, 137, 155, 156,
272/979, 273, 601, 602.91/93.94/96/983, 603.91/93/96/97, 604, 605, 606,
611, 612/965/966, 613, 628, 629, 640, 642/992, 646, 647, 648
800-520-7715
www.baumtools.com
Must Have Tools For
New German Diesels
Injector Seat Cutter Set
NE
W
#BINJSEATCUT
NE
W
#B900-0199
Use for cutting the head where the injector sits
for a clean seat. (CDI)
Injector Puller Set
Broken Glow Plug Remover Set
NE
Use to remove broken glow plugs. Comes
with 1/4”, 8mm and 10mm Taps. (CDI)
CDI Injector Puller Set
NE
W
W
#B611-0033PLUS
Use to pull out the Bosch style injectors on
the CDI engines.
Injector Puller Set
N
EW
#B611-0033LONG
Use to pull out the Bosch style injectors on
the CDI engines with extra long slidehammer
#B667-0363
Use to pull out the injectors on the CDI
engines. 2 style claws for tight places
Deluxe Injector Puller Kit
NE
W
#BCDIINJPLUS
Use to pull out the injectors, and cut the
injector seat.
800-519-4097
Item appearances may very
03052011
Mercedes Benz
Diesel Tools
Diesel Injection Nozzle Socket
Diesel Injection Nozzle Socket
#ST51-27
#606-0009
Application: Special deep broached 27mm socket to
remove injection nozzles without damaging the return pipe.
Diesel models 1967-1995.
Application: Special deep broached 22mm socket to
remove injection nozzles without damaging the return pipe.
Diesel models 1996-2001.
Engines: 601, 602, 603, 615, 616, 617
Engines: 604, 605, 606
Pre-Chamber Retainer Nut Socket
Early Model
Pre-Chamber Retainer Nut Socket - Late
Models
#615-0007
#ST3000
Application: Special slotted socket wrench for removing
the retainer nut of the pre-combustion chamber. Use with
extractor #602-0033.
Application: Special serrated male socket for the retainer
nut of the pre-combustion chamber. Use with extractor
#602-0033.
Engines: 615, 616, 617 (1967-1985)
Engines: 602, 603, 604, 605, 606 (1986-1999)
Pre-Combustion Chamber Extractor
Injection Pump Timing Pin
#602-0033B
#902-0033B
#602-0033 (Kit)
Application: Impact extractor for removing diesel
pre-combustion chamber on all models from 1967-1999.
Extractor adapter has both course and fine threads for
early and late models. Use with #615-0007 or #ST3000.
Engines: 601, 602, 603, 604, 605, 606, 615, 616, 617.
#601-0521
Application: This pin is used to position the diesel injection pump
at it’s optimal timing position during installation. 1982-1998.
Engines: 601, 602, 603, 605, 606, 617 (from 1982)
800-519-4097
Mercedes Benz
Diesel Tools
Injection Pump Delivery Valve Socket
Diesel Glow Plug Reamer
#901-0053
#917-0053
12X1.25mm
18X1.25mm
#KO4133
For removing heavy carbon deposit from glow plug hole which
is a major cause of glow plug failure.
Engines: 601, 602, 603, 617.95
Engines: 615, 616, 617
Glow Plug Remover and Reamer Set
Application: Special serrated socket to remove the injection
delivery valve from the injection pump for service.
Engines: 601, 602, 603, 605, 606, 617 (from 1982 onward)
Diesel Glow Plug Reamer
NE
W
#B606-0053
#B606-0053KIT
Use to ream the carbon build up out of the
glow plug hole.
Engines: 604, 605, 606, 642, 648
Application: Special 12x1.25mm extra long threaded reamer for removing heavy carbon deposit from
glow plug hole which is a major cause of glow plug
failure. For models from 1996 to end of production.
Engines: 604, 605, 606
M70TEK Kit contains:
GAUGE - 1000 psi with quick connect and pressure release.
M70TE
Injection Nozzle Adapters
M70TE/1
Mercedes, VW and Audi - 24X2.0mm
M70TE/1A Mercedes (Late model) - 22X1.5mm
M70TE/6
Nissan
M70TE/7
BMW - 24X1.5mm
M70TE/8
VW (TDI) - 10X1.0
Glow Plug Adapters
M70TE/2
Mercedes, VW and Audi - 18X1.5mm
M70TE/2A Mercedes (Late Model) - 12X1.5mm
M70TE/3
GM
M70TE/4
Isuzu
M70TE/5
Toyota
800-519-4097
#M70TEK
Mercedes Benz
Fluid Tools
Oil Level Dipstick
Transmission Dipsticks
#120-0721
#140-1521
#B8863B
Use to determine fluid
Use to determine fluid
level of the 722.6
level in the Sprinter
transmission
Transmission Filler Kit
#120-0621
Use to measure the engine oil level.
Engine: 112, 113,
271, 272, 642, 646,
647, 648
Engine: 103, 104,
111, 119, 120, 603,
604, 605, 606
Bluetec Oil Filter Wrench
Meta
NE
l
W
#642-0009
Mercedes Benz 84mm x 14 Flats oil filter
wrench. Fits Dodge Sprinter, Mercedes E320,
Jeep Cherokee 3.0L Diesel (Bluetech Diesels)
Common Rail Injector Back Flow Tester
#B1924
Includes 9 adapters to fill Mercedes Benz 722.9
transmissions along Porsche, with VW/Audi CVT,
DSG, and standard transmissions and more.
#B611-0421
Use to measure fuel return rate from injectors
in common rail diesels.
800-519-4097
Mercedes Benz and
Mini tools
lower control arm bushing Kit
Torsion Bar Saver
#QP1000
Mercedes S-Class W123 and W126 chassis are
prone to failure of the torsion bar end. With this kit
the torsion bar can remain on the vehicle and the
job takes about 1 hour, or 20 hours to remove and
install a new swaybar.
The kit includes new bushings, washers. bolt and
special stainless steel repair piece.
mini Cooper control arm tool
#B202-0043
Use to remove and install the rear axle carrier
mount bushing Mercedes W203, 209, 171
MINI Control arm bushing tool
#315140
#315150
Use to remove and install the control arm from
the hydraulic mount while still on the car.
R50, R52, R53 chassis
Use to remove and install the lower control
arm bushing on Mini Cooper
R50, R52, R53, R55, R56
800-520-9757
www.baumtools.com
Mercedes Benz
Undercar tools
Ball Joint Installer
Ball Joint Installer
#220-0343
#116-0462
Use to install the steering knuckle ball
joint with the knuckle on the car
W116, W123, W126 chassis
Presses the ball joint into the steering knuckle
on 211 (E-class from 2002); 215 (CL-Class from
2002); 219 (CLS-Class from 2006); 220
(S-Class from 2000); 230 (SL Class from 2003)
Differential Mount Bushing Kit
Air Strut Tools
#B210-0243
#220-0061
#900-0007
Use to remove the top seal and the front
Airmatic Suspension strut. Use #900-0007 to
remove the valve from the strut
W220 chassis
Use to remove and install the metalastic differntial
mount bushings in the rear subframe.
W210 chassis
800-520-9757
www.baumtools.com
Mercedes Benz Lower
control Arm tools
#B202-0143
Use to remove and install tool for rear
rubber mount on the lower wishbone for
W170 and W202 chassis. Also installs front
mount on W208 chassis
#B210-0043
Use to remove and install the bushing in the
lower control arm (wishbone) front & rear
W210 chassis
#B220-0643
Use to remove and install the front lower
control arm bushing
W203, 220, 221, 171, 209, 211, 215, 219,
230
#B140-1143
Use to remove and install the lower control
arm bushing
W140 chassis
800-520-9757
www.baumtools.com
Hub and Bearing Pullers
Heavy Duty Hub Puller
#B234MASTER
This kit quickly pushes the axle out of the hub, and removes the hub.
Includes: hydraulic ram, 4 lug and 5 lug adapters, and slide hammer.
Hydraulic pump not included. 10 ton recommended
Wheel Bearing Puller
Covers:
•Mercedes •BMW
•VW/ Audi •Porsche
•Volvo
•Toyota/Lexus
•Nissan/Infinity
•Honda/Acura
•Other Asian Makes
•Domestic
FRONT WHEEL
HUB PULLER
#B90/3
On the car press kit removes
and installs hubs. Not for
ABS equipped models
#B90K
The B90K is a press kit that REMOVES and INSTALLS front and rear wheel bearing with the
spindle ON THE CAR. Saves Time and Makes Money.
Our Best Coverage Yet
Use with #B90/3 or B234MASTER for ABS equipped models
800-848-6657
www.baumtools.com
Spring Compressors
MACPHERSON STRUT SPRING COMPRESSOR
#1117J
Compresses all types of MacPherson
style coil springs front and rear.
Includes three sets of jaws
•75-110mm
•110-140mm
•140-190mm
Fits most Mercedes Benz’s and many other vehicles.
#1117V
Vice for Shock Absorber
Mercedes
BMW
VWAudi
Porsche
Toyota/lexus
Nissan
Honda/Acura
and More
Coil Spring Compressor
#924-0231
Compresses front and rear axle springs in the car on models with idler arm
Chassis: 107, 114, 116, 123, 124, 126, 129, 140, 164, 170, 171, 201, 202,
203, 204, 208, 210, 211, 219
800-520-9757
www.baumtools.com
AUTOMATIC TRANSMISSION
FILL SET
A
Kit Contents:
Pump Assembly A
Nut and Ferrules B
722.9 Mercedes Benz Adapter #1
VW/Audi Straight Adapter #2
VW/Audi Short Adapter #3
VW/Audi Long Adapter #4
VW/Audi CVT Adapter #5
VW/Audi DSG Adapter #6
Ford Transmission Adapter #7
Universal Adapter #8
B
3
8
2
4 1
67
5
#B1924
800-520-9757
www.baumtools.com
70Amp Power Supply with Clean
power For Flash Programming
W
E
N
Dual Fans
for Cooling
#B70A
Power Supply Features
• Constant voltage output selectable
from 13.0 to 14.8V DC
• Output current up to 70 amps
• Clean power for flash reprogramming
• Provides power to vehicles on display
Battery Charger Features
• Fully automatic operation for 12V batteries
• Works with regular automotive, deep-cycle,
AGM, and gel cell battery types
• Variable charge rates 4/20/70 amps
• Digital volts and amps display
• Manual mode with digital timer
Unit Features
• 120/220 VAC 50/60 Hz Input
• Microprocessor controlled operation
• Extra long 9’ line cord with 20A plug
• Extended reach 9’ output cables
• Heavy duty clamps with replaceable jaws
• Large carrying handle or can be permanently
mounted to a shop vehicle lift
• Dual temperature controlled cooling fans
• Durable anodized aluminum case
• Can supply a constant voltage for flash reprogramming
• UL/CUL approved
800-519-4097
www.baumtools.com / sales@baumtools.com
More German auto repair manuals for the professional technician!
Buy the repair manuals we build for our classes! These manuals have gone through several updates and are written for
the European repair specialist. Years of tech suggestions have gone into compiling the information you really need in
your shop. Guaranteed the most comprehensive manuals you have ever used on these subjects. This information is not
available anywhere else. Try one and you will want them all!
800-518-7821 USA & Canada - 941-927-1414 Intl. - 941-927-1612 Fax
Sales@baumtools.com, www.baumtools.com
VW-Audi Advanced Data
Blocks, Volume One (360
pgs)
Here it is, the VW and Audi
Diagnostic information that
will help you fix it right the first
time! From the basics of VW
and Audi Diagnostics to critical information about CAN system,
and everything in between. This book will guide you through
the functions supported by VAG style scan tools with simple
explanations and real world examples. Learn the ins and outs of
diagnosing VW and Audi cars quickly, efficiently, and correctly.
Includes a comprehensive set of data tables that can only be
found here. This book will be a key part of your shop library!
Includes: Diagnostic Basics, Stable Power Supply fundamentals,
Data Block Introduction, Controllers and How they Communicate, VAG Scan tool addresses, VAG Scan Tool Functions with
examples, Output Diagnostic Test Mode, Code Control Module,
Data Blocks, Data Block Display Groups, OBD II Address 33, CAN
Refresh and Update.
BMW Systems, Body
Electronics I (298 pgs)
Includes: Coding and Programming Principles, I and K Body
Bus Systems, Throttle Body
MDK - EDK - EML Systems, EWS
System I, II, III, CAS System (Car
Access System) E65, ABS - DSC
III (Dynamic Stability Control),
Instrument SRI Resetting Procedures, E65 CBS (Condition Base
Service) System
BMW Body Electronics II
(489 pgs)
Includes: E6x iDrive Driving
Area Systems, On Board Diagnostics, Maintenance Feature
of iDrive, E65 (Intelligent Safety
Integration System), MRS Evolution (MRS I, II, III, IV, V), CAN
Bus (Controller Area Network), Live Hands-on Diagnostics, IHKA
(Climate Control System), MOST Bus Overview & Diagnostics,
GT1 Diagnostics and Service add-ons, Navigation Overview
(Mk1 thru Mk4)
BMW CAN & Bus
Systems (369 pgs)
Includes: Power Supply and
Batteries, Power Management
Systems, Battery Safety Terminal
(BST), Intelligent Battery System
(IBS), Electrical Energy Management, Bit Serial Data Interface
(BSD), Power Module (PM) E65, CAN Bus Principles for Coding,
Understanding principle of serial bus, CAN Bus (Controller Area
Network), D-Bus (Diagnostic Bus), ALL Sub-Bus Systems
Mercedes CAN Bus & System
Diagnostics
(393 pgs)
Includes: ME-SFI Diagnostic
Discussions, DAS (Drive Authorization System), FSS / ASSYST
Systems and Reset Procedures,
Dual Battery System, SDS /
STAR LIVE Diagnostics, EIS Evolution & Diagnostics, Keyless Go
System, Sensotronic (SBC) Brake System, CAN Bus Network
Overview, CAN B - CAN C Overview, D2B Fiber Optics
Mercedes Body
Electronics II (429 pgs)
Includes: CAN configuration W221 (X30 Connectors),
Networking & Communications (CAN), Digital TELE AID
System, Audio / Communications / MOST Structure, SDS/
DAS Diagnostics TELE AID, SD
Control Module (N55) R230, SDS/DAS Diagnostics SD Module
(N55), 4 Steps for CAN Diagnostics, Tire Pressure Monitoring
(TPM), MOST Bus Overview & Diagnostics, TPM / TPC Activation
& Learning W211, SDS/DAS TPM Diagnostics, Vario Roof, Active
Body Control, SDS/DAS (ABC) Diagnostics, Central Locking / PSE,
SDS/DAS AAC/HVAC Diagnostics
Check our website for additionl Training and Reference
titles for European cars, plus more:
Table of Contents
01-General Engine1
03-Cylinder Crankcase4
05-Cylinder Head, Engine Timing7
07-Injection Systems14
09-Diesel18
13-V Belt 24
15-Ingition24
18-Lubrication26
20-Engine Cooling28
25-Clutch & Pedal Linkage30
26-Manual Transmission31
27-Automatic Transmission33
32-Suspension39
33-Front Axle41
35-Rear Axle44
40-Wheels47
41-Driveshaft 48
42-Brakes49
46-Steering51
47-Fuel Supply54
54- Instrument Cluster55
82-Electrial Equipment56
83-Heating & Air Conditioning 59
B-Body60
D-Diagnostics61
K-Kablex63
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
01-General Engine
117-0223
TS1015
TS10155
H992LG-T55
ST1054-10
ST1054-5
3922 Murdock Ave
Tool Name
CASE DRILLING
FIXTURE - V8
Application
Model
M116, 117
Use to install Timesert insert when the cylinder bolt holes
strip in the light alloy type engine case. Use with Timesert kit
#TS1015 and insert #TS10155
Tool Name
TIMESERT KIT 10X1.5mm
Application
Timesert kit for rethreading case when cylinder head bolts
strip out. Use with alignment jig #117-0223 and insert
#TS10155
Model
M116, 117
Tool Name
TIMESERT INSERT
10X1.5X24.5mm
Application
Timesert inserts for case repair on Mercedes Benz V8
engines.
Model
M116, 117
Tool Name
HEADBOLT SOCKET
- T55 TORX 90mm
1/2"DR.
Application
Special round shaft 96mm long socket for the T55 TORX
socket head bolt on cylinder head of late model 6 and 8
cylinder engines.
Model
M112, 113, 155,
275
Tool Name
HEAD BOLT HEX
HEAD SOCKET 10mm X 160mm
Application
Use this long Allen head socket to remove and install
cylinder head bolts.
Model
M100, 110, 114,
115, 130, 180,
OM615, 616,
617
Tool Name
Application
HEX HEAD SOCKET - 5mm x 180mm long body for various engine bolts.
5mm x 180mm 1/2"
DRIVE
Page #1
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
01-General Engine
ST1054TXT55
ST3004
ST3054/8L
Tool Name
Application
HEADBOLT SOCKET Special 130mm long T55 TORX head bolt socket for 112
- TORX T55
engines. Use with #H992LG-T55 to remove all bolts.
Mercedes #000-589-0310
Model
M112, 113, 155,
275
Tool Name
CYLINDER HEAD
SOCKET 12mm XZN
X 55mm 1/2"DR.
Model
104, 112, 113,
119, 120
Tool Name
Application
Model
HEX HEAD SOCKET - 130 mm long, 1/2" square drive, for Allen screws on cylinder M115, 116, 117
8mm X 130mm 3/8"
head.
DRIVE
ST3054X-M8
Tool Name
XZN HEX HEAD
SOCKET - 8mm X
140mm 1/2" DRIVE
ST3054XM10
Tool Name
XZN HEX HEAD
SOCKET - 10mm X
140mm 1/2" DRIVE
ST3054XM12
Tool Name
CYLINDER
HEADBOLT SOCKET
- 12mm
3922 Murdock Ave
Application
XZN Hex Head Socket-12mm x 55mm 1/2" drive with
special short format for cylinder head bolts.
Application
Use to remove and install cylinder head bolts. Tri-square
socket head screws (XZN). 8mm 12 point 1/2 square
socket, 140 mm long for screws on cylinder head.
Model
M115, 116, 117
Application
Model
M112, 113, 137,
127, OM602,
603,
604, 605, 606,
612, 613, 628,
629, 647, 648
Application
Model
M102, 103, 104,
110, 116, 117,
119, 120, 615,
616, 617
Page #2
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
01-General Engine
ST3149-8
Tool Name
Application
Model
UNIVERSAL HEX
Use to remove cylinder head bolts at rear of case. Use with M116, 117
HEAD SOCKET - 8mm sockets #ST3054-8G and #916-0013.
3/8" DRIVE.
916-0013
001-0016/2
001-0016/9
103-0114
119-0014
3922 Murdock Ave
Tool Name
Application
HEX HEAD SOCKET - Use to access head bolts under rocker shaft for R&R and
8mm ’C’ 1/2" DRIVE torquing. (See #ST3054-G8 and #ST3149-8)
Model
M116, 117
Tool Name
ENGINE MOUNT
WRENCH
Application
Special 16mm wrench designed to remove the nuts from
Mercedes Benz engine mount.
Model
W203, 204,
210, 211, 221
Tool Name
ENGINE MOUNT
WRENCH
Application
Special 17mm wrench designed to remove the nuts from
Mercedes Benz engine mount.
Model
W203, 204,
210, 211, 221
Tool Name
CAMSHAFT SEAL
GUIDE SLEEVE - 20
mm
Application
Use to install the camshaft sealing ring with cover on.
Protects seal lip from damage.
Model
M103, 104, 120
Tool Name
CAMSHAFT SEAL
GUIDE SLEEVE
Application
Use to mount shaft sealing ring with cover on camshaft.
Model
M119
Page #3
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
03-Cylinder Crankcase
112-0040
Tool Name
Application
Model
VIBRATION DAMPER Holds vibration damper when loosening and tightening
M112, M113,
COUNTER-HOLDER center bolt. Handle can be extended with commercially
M137
available pipe, e.g. 3/4 din 2441, diameter 26.9 x 3.25 mm,
length 1000 mm
271-0040
110-0040
112-0340
116-0140
285-0240
3922 Murdock Ave
Tool Name
Application
Model
271
VIBRATION DAMPER Holds vibration damper when loosening and tightening
COUNTER-HOLDER center bolt. Handle can be extended with commercially
available pipe, e.g. 3/4 din 2441, diameter 26.9 x 3.25 mm,
length 1000 mm
Tool Name
FLYWHEEL LOCK
Application
Use to lock flywheel at starter ring gear.
Tool Name
FLYWHEEL LOCK
Application
Model
Use to lock crankshaft on starter ring gear (mount in starter M112, 113, 137
hole) for vehicles with left and right-hand steering.
Tool Name
FLYWHEEL LOCK
Application
Locks crankshaft on starter ring gear.
Model
M110, 115, 116,
117, 119, 615,
616, 617
Tool Name
FLYWHEEL LOCK
Application
Retaining lock for crankshaft on starter ring gear.
Model
M275, M285
Page #4
Model
M110, 615, 616,
617
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
601-0240
602-0040
ST51-27
110-0761
111-0843
119-0114
3922 Murdock Ave
Tool Name
FLYWHEEL LOCK
Application
Locks flywheel at starter ring gear from the transmission
side.
Model
M102, 103, 104,
111, 601, 602,
603, 604, 605,
606, 611, 612,
613
Tool Name
FLYWHEEL LOCK
Application
Locks flywheel from the starter side.
Model
M102, 103, 104,
111, 120, 137,
601, 602, 603,
604, 605, 606
Tool Name
DRIVE SHAFT
SOCKET - 27mm
Application
12 point 1/2" DR. socket for loosening and tightening the
center bolt of the crankshaft. All models except 100.
Model
All
Tool Name
Application
Model
CRANKSHAFT
Use to press in the front crankshaft radial seal ring for pulley M110, 116, 117,
SEALING RING
end of crankshaft.
123
SLEEVE INSTALLER
Tool Name
REAR CRANKSHAFT
RADIAL SEAL
INSTALLER
Application
Tool for pressing rear crankshaft radial seal into position on
crankshaft. Additional sleeve with 3 mm offset to the inside
for later models.
Tool Name
Application
For pressing in the front crankshaft radial seal ring.
FRONT
CRANKSHAFT SEAL
RING SLEEVE
Page #5
Model
M102, 111, 112,
113, 137, 275,
601, 602, 603,
604, 605, 606,
628
Model
M112, 113, 119,
120
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
111-1231
KK22-1
KK21-0
KO4012M
Tool Name
DIPSTICK TUBE
DRIVER
Application
Installing tool for dipstick allows easy installation in most
models. Vehicles with left and right-hand steering.
Model
M102, 103, 104,
111, 116, 117,
119, 601, 602,
603, 615, 616,
617
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY SMALL
Application
Small counter stay for use with Kukko extractor #KK21-0
thru #KK21-5. (#000-3333)
Model
All
Tool Name
INTERNAL
EXTRACTOR
Application
Use to pull bearings out of housing.
Model
All
Tool Name
Application
SHORT HEX HEAD
Short hex head sockets for access to tight locations. Sizes
SOCKET - 1/2 "DRIVE available 4, 5, 6, 8, 10, 12, 14, 17 and 19mm. 12, 17 and
19mm most common for Mercedes.
Model
All
KO4012M-14
B3676
3922 Murdock Ave
Tool Name
Application
1/2" drive stubby hex 14mm socket for oil drain plugs
OIL DRAIN HEX
HEAD SOCKET 14mm
1/2" DRIVE
Model
All
Tool Name
OIL DRAIN WRENCH
- 14mm HEX X 13mm
BOX
Model
W107, 123,
124,
126, 129, 140,
170, 201, 202,
208, 210, 220
Application
Use for oil service on later models requiring longer bit and
smaller ring. For oil, differential and transmission drain
plugs. (#117-0207)
Page #6
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B3677
W1088
Tool Name
Application
OIL DRAIN WRENCH Use to service oil, differential and transmission drain plugs.
- 14mm HEX X 17mm
BOX
Model
M110, 107, 116,
117, 123, 124,
126, 129, 140,
170, 201, 202,
208, 210, 220,
615, 616, 617,
716, 717
Tool Name
PILOT BEARING
PULLER - 10mm 25mm
Model
All
Application
Universal pilot bearing and bushing puller. Particularly
narrow format and sharp lip allows access to even the
hardest to get at bushings and bearings without damage.
05-Cylinder Head, Engine Timing
B111-0315KIT
Tool Name
Application
CAM ALIGNMENT KIT Use to lock cams and flywheel on a range of Mercedes
Benz models. kit includes flywheel locks and camshaft
retaining pins.
B112-0001K
B271-0140
3922 Murdock Ave
Model
102, 103, 104,
111, 112, 113,
119, 137, 272,
273, 601, 602,
603, 604, 605,
606, 611, 612,
613, 628, 629,
640, 642, 646,
647, 648
Tool Name
Application
Model
CAM ALIGNMENT KIT This kit contains the intake and exhaust cam alignment jigs 112, 113
and the cam holding wrench. Kit includes 112-0001,
112-0132, and 112-0032.
Tool Name
Application
Model
271 CAM TIMING KIT Use to setup and hold cam timing during chain replacement. M271
Kit includes 271-0140, 271-0061, 271-0015, 271-0031
Page #7
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
111-0315
137-0140
285-0040
285-0140
M0037
M0037-104
3922 Murdock Ave
Tool Name
RETAINING PINS
Application
(2 pairs) each connected with flexible tubing, for holding
camshaft in installation position (25 after ignition TDC)
Tool Name
RETAINERS;
CAMSHAFT (2 pcs)
Application
Model
M137, 275
Used to hold camshafts in position 30 degrees ATDC; for
loosening and tightening the bolt that attaches the camshaft
sprocket or to adjust cam timing (2 pieces). Use with
#137-0040
Tool Name
RETAINING DEVICE
Application
Only for left bank of cylinders. This retaining device is
designed for positioning the camshaft in 30 degrees after
TDC position.This makes it possible to slacken and tighten
the bolts attaching the camshaft sprocket. Use #137-0140
for the right bank of c
Model
W275, 285
Tool Name
TIMING CHAIN
RETAINER
Application
Used to retaining timing chain on sprocket during chain
replacement
Operation.
Model
W275, 285
Tool Name
TIMING CHAIN
LOADER V-8
Application
Model
M115,116, 117
Holds chain tight against cam sprocket so chain can’t slip
during installation. Cuts time and manpower in half. Early V8
models.
Tool Name
CHAIN LOADER M104
Application
Holds chain tight against cam sprocket so chain can’t slip
during installation. Cuts time and manpower in half.
Page #8
Model
M111, 119, 604,
605, 606, 611
Model
M104
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
M0037-119
102-0421
000-5843
112-0963
103-0163
966-5843
3922 Murdock Ave
Tool Name
Application
CHAIN LOADER - 119 Holds chain tight against cam sprocket so chain can't slip
during
Installation. Cuts time and manpower in half.
Model
M119
Tool Name
CHAIN LOADING
FIXTURE
Application
Use to load timing chain onto sprocket on 6 and 8 cylinder
engines.
Model
M112, 113
Tool Name
CHAIN LINK PRESS DOUBLE AND
SINGLE ROW
Application
Model
All
Use to press on external lugs and rivets of dip-type
fasteners of duplex Roller chain. See #966-5843 to remove
rivets.
Tool Name
CHAIN LINK PRESS
ADAPTER - DOUBLE
ROW
Application
Includes: chain guide and press thrust pieces. Use for
pressing rivet onto Outer link. Use with rivet pressing tool
#000-5843. This set comes with #000-5843.
Model
M102, 104, 110,
111, 112, 113,
116, 117, 119,
120, 116, 275,
611, 612, 613,
642, 646, 647,
647, 668
Tool Name
CHAIN LINK PRESS
ADAPTER - SINGLE
ROW
Application
Use with tool #000-5843 to rivet single row timing chains.
Model
M102, 103, 104,
111, 112, 113,
116, 166, 602,
603, 611, 612,
613, 640, 646,
647, 648, 668
Tool Name
Application
Model
TIMING CHAIN
Use to separate single and double row timing chains without All
SPLITTER - SINGLE & damaging links
DOUBLE ROW
Page #9
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
116-2033
Tool Name
CHAIN RAIL PIN
PULLER - SLIDE
HAMMER TYPE
116-2033P
915-0734
B116-0134
917-0623
3922 Murdock Ave
Application
Removes tensioner rails and rocker pins. Includes: Slide
hammer and 5mm, 6mm, 8mm and 10mm threaded pins.
Model
M102, 103, 104,
110, 111, 116,
117, 119, 120,
272, 275, 601,
602, 603, 606,
612, 615, 616,
617, 628, 640,
642
Tool Name
Application
Model
All
CHAIN RAIL PIN
Replacement threaded rods for #116-2033 chain rail pin
PULLER - THREADED puller. Sizes #1160034 - 5x150mm, #116-0134 6x50mm,
ROD SET
#116-0234 6x150mm, #616-0034 8x150mm and #116-0334
10x100mm spindles.
Tool Name
CHAIN RAIL PIN
PULLER - HEAVY
DUTY
Application
Pulls sliding rail pins on all models. Includes: Puller and
5mm, 6mm, and 8mm spindles.
Tool Name
Application
THREADED ROD - 6 x Use with chain rail pin puller #915-0734. (1 piece)
8 X 50mm
Model
All
Model
M110, 115, 116,
117, 119, 155,
272, 275,
OM601,
602, 603, 604,
605, 606, 612,
615, 616, 617,
628, 640, 642
Tool Name
Application
Model
HYDRAULIC LIFTER Measures valve clearance so proper compensating element M116, M117
GAUGE V-8
disk can be installed.
from 1978
Page #10
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
111-1861
Tool Name
Application
VALVE SPRING
Use with tool #102-0161 for 102. Use with tool #102-0359
COMPRESSOR ARM for 102-16 valve. Use with tool #103-0061 for 103 Use with
tool #601-0259 for 601. Use with #111-0059 for all others.
123-0361
M1160
116-0101
119-0001
116-0663
3922 Murdock Ave
Model
M102, 103, 104,
111, 112, 113,
119, 120,
OM601,
602, 603, 604,
605, 606
Tool Name
VALVE SPRING
COMPRESSOR - 6
CYL. & V-8
Application
Model
Use to depress valve springs for replacement of seals,
M114, 115, 116,
stems, or valves on pre 1991 6 cylinder (except 110) and 8 117, 130, 180
cylinder engines through 1991. For 110 engines see
#110-0461. All parts are available separately.
Tool Name
VALVE SPRING
COMPRESSOR KIT 102, 103, 601
ENGINES
Application
Use to depress valve springs for replacement of seals,
stems, or valves on
Late model 4 and 6 cylinder engines. Includes: #601-0261,
#102-0161,
#103-0061
Model
M102, 103
(except
4-valve )
Tool Name
CAMSHAFT
HOLDING WRENCH
Application
Aluminum wrench for holding and turning camshaft during
assembly and timing.
Model
M110, 115, 116,
117, OM615,
616, 617
Tool Name
CAMSHAFT
TURNING WRENCH
Application
Double open end wrench 26.5mm X 27.5mm 256mm long
for turning camshaft to assembly position.
Model
M104, 119
Tool Name
VALVE KEEPER
REMOVER
Application
Special magnetic finger to remove conical valve keepers.
Model
All
Page #11
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
W7080
116-0043
ST11063
615-0001
615-0003
900-0307
3922 Murdock Ave
Tool Name
VALVE STEM SEAL
INSTALLER
Application
Installs 7mm and 8mm valve stem seals. (#119-0043)
Model
M104, 111, 112,
113, 119, 120,
604, 605, 606,
668
Tool Name
VALVE STEM SEAL
INSTALLER - 9mm
Application
Use to press in the 9mm valve stem seal onto the valve
guide sleeve.
Model
M110, 115, 116,
117
Tool Name
VALVE STEM SEAL
PLIERS
Application
Use to remove valve stem seals.
Model
All
Tool Name
VALVE ADJUSTING
WRENCH SET 14mm PAIR
Application
Diesel valve adjusting wrenches. Use with retaining nut
holder #615-0003.
Model
615, 616, 617
Tool Name
DIESEL SPRING
PLATE HOLDING
WRENCH - 30mm
Application
Model
Use to hold retaining nut when adjusting valves with wrench 615, 616, 617
pair #615-0001.
Tool Name
A/C IDLER PULLEY
ALLEN WRENCH 8mm x 10mm
Application
Model
Special A/C idler pulley wrench allows access to 8mm bolts M102, 103, 116,
on 102 and 103 idler pulley, as well as 10mm bolts on 116, 117
117 V8 models. Also see kit #B9042.
Page #12
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
M70TE
M70TE/1
M70TE/1A
M70TE/2
M70TE/2A
M70TE/X
3922 Murdock Ave
Tool Name
DIESEL
COMPRESSION
GAUGE - 1000 psi
Application
Direct reading compression gauge with hose and quick
connect adapter for diesel engines. Please request adapter
when ordering.
Model
601, 602, 603,
604, 605, 606,
615, 616, 617
Tool Name
DIESEL
COMPRESSION
GAUGE ADAPTER EARLY MODEL
NOZZLE
Application
Model
Adapter for early large injection nozzle port. 24mm X 2.0mm 615, 616, 617
Tool Name
DIESEL
COMPRESSION
GAUGE ADAPTER LATE MODEL
NOZZLE
Application
Adapter for later model diesels with small injection nozzle
port. 22mm X
1.5mm
Model
601, 602, 603,
606
Tool Name
Application
BOSCH GLOW PLUG Adapter for early large Glow plug port. 18mm X 1.5mm
18X1.5mm - EARLY
MERCEDES
Model
615, 616, 617
Tool Name
Application
BOSCH GLOW PLUG Adapter for later model diesels with small Glow plug port.
12X1.5mm - LATE
12mm X 1.5mm
MODELS
Model
601, 602, 603,
604, 605, 606,
612, 617 Turbo
Tool Name
DIESEL
COMPRESSION
ADAPTER
EXTENSION
Model
604, 605, 606,
612
Application
Use to access deep port injectors or glow plugs on late
model engines.
Use with adapter #M70TE/2A.
Page #13
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
07-Injection System
1318KIT
1318-R
1318K
1318/4
1318/5
1318/6
3922 Murdock Ave
Tool Name
FUEL INJECTION
PRESSURE TEST MASTER KIT
Application
Model
Checks the fuel supply, running and leakage pressures of all All
types of injection systems. Includes: Gauge
(160psi/1100kpa), hoses and fittings and storage case.
Tool Name
FUEL INJECTION
PRESSURE GAUGE ECONOMY KIT
Application
Model
Checks charging (supply), running and leakage pressures of Injected
all types of injection systems. Includes: Gauge
Engines
(160psi/1100kpa), 3-way switch, hoses and fittings and
storage case.
Tool Name
UNIVERSAL
ADAPTER KIT
Application
Contains all the adapters for tool # 1318.
Tool Name
Application
Male to Male adapter with dual conical fittings.
MALE ADAPTER 10X1mm X 12X1.5mm
Model
All
Model
All
Tool Name
Application
Model
FEMALE ADAPTERS Female to Male adapters. Sizes available 8x1mm x
All
12x1.5mm, 10x1mm x 12x1.5mm, 12x1.5mm x 12x1.5mm,
14x1.5mm x 12x1.5mm. Please specify size when ordering.
Tool Name
MALE ADAPTERS
Application
Model
Male to Male adapters. Sizes available 8x1mm X 10x1mm, All
8x1mm X 12x1.5mm, 8x1mm X 12x1.5mm X 70mm,
12x1.5mm x 12x1.5mm, 14x1.5mm x 12x1.5mm. Please
specify size when ordering.
Page #14
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
07-Injection System
1318/8
Tool Name
THREADED BANJO
RINGS
1318/10
000-3323
691STE
ST12975
ST11085
3922 Murdock Ave
Application
Threaded banjo rings for testing in tight spots. Sizes
available 8mm X 10x1.5mm Male, 10mm X 12x1.5mm.
Specify size when ordering.
Model
All
Tool Name
Application
COPPER WASHERS 8, 10 or 12mm Diameter
Model
All
Tool Name
SYNCHRONIZER
HOOD
Application
Model
Allows synchronizing of dual oval type carburetors with large M114, 130, 180
circular formats found in some foreign model carburetors
such as Weber, Zenith...etc. Use with either # 691A or
000-1223.
Tool Name
CARBURETOR
SYNCHRONIZER
(STE)
Application
Model
Plug type base with exchangeable tips for different types of All Carbureted
carburetors.
Tool Name
FUEL LINE CLAMP 30mm
Application
Use to block off fuel line when working on fuel system or
removing engine.
Tool Name
FINE REAMERS 0.33 2.00mm
Model
All
Application
Tapered reamers allow precision reaming of carburetor main jets,
injectors, solenoids and other small orifices. Set includes 13 reamers
and pin vise.
Page #15
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
07-Injection System
M501
Tool Name
THROTTLE
POTENTIOMETER
TESTER
Application
Test the throttle potentiometer used in all late model
engines.
ST10507KK-3
Model
M111, M112,
113
Tool Name
Application
CO ADJUSMENT HEX Use to adjusts CO and idle mixture control screw on fuel
SCREWDRIVER injection
3mm X 380mm long
distributor. MB #000-589-1411
A0201
A0202
A020201
A020202
3922 Murdock Ave
Model
M102, 103, 110,
116, 117
Tool Name
BREAK-OUT BOX 60-PIN
Application
Model
Basic 60 pin break out box to test the contacts, continuity, All
inputs and outputs of a variety of electronic control units.
Adapters are available for Bosch, Siemens and TEVES 25,
35, 38, 42, 55 and 60 pin connectors as well as many
others.
Tool Name
BREAK-OUT BOX 120-PIN
Application
Model
Basic 120 pin break out box to test the contacts, continuity, All
inputs and outputs of a variety of electronic control units.
Adapters are available for Bosch, Siemens and TEVES 25,
35, 38, 55, 68 and 88 pin connectors as well as many
others.
Tool Name
25-PIN BREAK OUT
BOX CABLE
Application
KE1, KE2, KE3.1, KE3.5, L2, D-Jet, EZK, 4MATIC
Model
W107, 124,
126,
129, 140, 201
Tool Name
35 PIN BREAK OUT
BOX CABLE
Application
K-Jet, KE3.2, KE3.3, ABS2/2B, ABS (202), EGS
Model
W107, 124,
126,
129, 140, 201,
202
Page #16
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
07-Injection System
A020204
A020206
OBD2-BOB
102-0463
119-0463
140-0133
3922 Murdock Ave
Tool Name
55-PIN BOSCH
BREAK OUT BOX
CABLE
Application
KE5.1, KE5.2, ABS 3 & 5 and later, EGS, IFI Diesel, ASR
(202).
Model
W124, 129,
140,
202, 208, 210
Tool Name
88 PIN BREAK OUT
BOX
Application
88 pin break out box for Bosch 88 pin controlers
Model
Bosch 88 pin
control units
Tool Name
OBDII BREAK OUT
BOX
Application
Use to pin out OBDII
Model
1996 and Up
Tool Name
TEST HARNESS EHA
Application
Tests CIS-E electronic idle speed control with standard
multimeter. (VOMDMM)
Model
W102, 103,
112, 113, 116,
117
Tool Name
Application
LH FUEL PRESSURE With 7/16-20 tapered SAE angled connection and 12 x
HOSE
1.5mm union nut. For LH fuel injection system (use with
tester #103-0021).
Model
M104, 111, 112,
113, 119, 120
Tool Name
MOUNTING LEVER
Model
M104, 119, 120
Application
For module from module box.
Page #17
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
07-Injection System
B110-0101
M0035A
T13-22
09-Diesel
B667-0363
Tool Name
Application
V6 ENGINE SPARK Special angle design with 17mm wrench to be a lever for
PLUG BOOT PULLER removing and installing the wires
Model
M110/ML
Tool Name
Application
GAS TANK SOCKET - Use to remove fuel tank filter body and fuel gauge sending
46mm
units.
Model
All
Tool Name
HEX HEAD BIT 22mm
Application
Use to remove gas tank drain plugs on late model cars.
22mm.
Model
All from 1980 to
present
Tool Name
INJECTOR PULLER
SET
Application
Use to pull out the injectors on the CDI engines. 2 style
claws for tight places
Model
CDI
B611-0033PLUS
Tool Name
INJECTOR PULLER
SET
3922 Murdock Ave
Application
Model
Use to pull out the Bosch style injectors on the CDI engines. CDI
Page #18
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
09-Diesel
B611-0033LONG
B900-0199
Tool Name
LONG INJECTOR
PULLER SET
Application
Model
Use to pull out the Bosch style injectors on the CDI engines CDI
with extra long slidehammer
Tool Name
Application
Use to remove broken glow plugs. Comes with 1/4”, 8mm
and 10mm Taps. (CDI)
Model
CDI
Application
Use to pull out the injectors, and cut the injector seat
Model
CDI
Application
Use for cutting the head where the injector sits for a clean
seat. (CDI)
Model
CDI
BROKEN GLOW
PLUG REMOVER SET
BCDIINJPLUS
Tool Name
DELUXE INJECTOR
PULLER AND SEAT
CUTTER KIT
BINJSEATCUT
Tool Name
INJECTOR SEAT
CUTTER SET
602-0033
902-0033B
3922 Murdock Ave
Tool Name
Application
IMPACT EXTRACTOR Slide hammer with #902-0033B threaded adapter for
FOR PRE
removing the precombustion chambers on diesel models.
CHAMBERS - DIESEL
Tool Name
PRE CHAMBER
PULLER SLIDE
HAMMER ADAPTER DIESEL
Model
601, 602, 603,
604, 605, 606,
615, 616, 617
Application
Model
Special slide hammer adapter for removing pre combustion 604, 605, 606,
chamber from early and late model Turbo Mercedes diesel 615, 616, 617
models. Use with #602-0033B. Have both coarse and fine
threads.
Page #19
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
09-Diesel
615-0007
ST3000
Tool Name
Application
PRE-CHAMBER
Use to remove and install the threaded retainer ring of the
RETAINER RING PIN pre-chamber.
WRENCH - DIESEL
Model
615, 616, 617
Tool Name
RE CHAMBER
RETAINER RING
SOCKET - DIESEL
Model
602, 603, 604,
605, 606,
617.95
Application
Multi spline socket for removing pre combustion chamber
retainer ring on late model indirect injection diesel models.
MB #604 589 0109 which replaced #603-589-0009
B606-0053KIT
Tool Name
Application
Model
GLOW PLUG PULLER Use to remove the glow plug and ream the pre combustion 601, 602, 603,
AND REAMER SET
chamber
617 Turbo, 642,
648
B606-0053
901-0053
917-0053
3922 Murdock Ave
Tool Name
GLOW PLUG BORE
REAMER - ’PENCIL’
TYPE EXTRA LONG
Application
Model
Special 12x1.25mm extra long threaded reamer for
604, 605, 606,
removing heavy carbon deposit from glow plug hole which is 648
a major cause of glow plug failure. For models from 1996 to
end of production.
Tool Name
GLOW PLUG BORE
REAMER - ’PENCIL’
TYPE - DIESEL
Application
Model
Special 12x1.25mm reamer for removing heavy carbon
601, 602, 603,
deposit from glow plug hole which is a major cause of glow 617 Turbo
plug failure. For models from 1983 to end of production.
Tool Name
GLOW PLUG
REAMER - LARGE
TYPE - DIESEL
Application
Special 18x1.25mm threaded reamer for removing heavy
carbon deposit from glow plug hole which is a major cause
of glow plug failure. For models from 1967 to 1985. Non
Turbo. Universal not included.
Page #20
Model
615, 616,
617.91/93
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
09-Diesel
ST10627
617-0821
M502
M24D
601-0008
601-0514
3922 Murdock Ave
Tool Name
Application
GLOW PLUG
Use to remove and install the glow plug connectors on S
CONNECTOR PLIER class diesel models from 2000 onward.
Model
611, 612, 613,
628, 640, 642,
646, 647, 648
Tool Name
DIESEL TIMING
TOOL - STATIC
Model
601, 602, 603,
605, 606,
617.95
Application
Position transmitter to measure start of fuel delivery using
the RIV method.
Tool Name
Application
Model
DIESEL FUEL
Measures the diesel fuel pressure in high pressure CDI type Diesel from
PRESSURE TESTER engines.
1997 on
Tool Name
DIESEL INJECTION
NOZZLE TESTER
Application
Model
Test opening pressure, spray pattern, and cleans injectors. All Diesel
Kit includes: Gauge (7000psi/500bar) pump and steel
Engines
adaptor line. May be upgraded to test gasoline injectors.
Tool Name
INJECTION PUMP
SPLINED WRENCH
Application
Use for rotating the injection pump camshaft.
Model
601, 602, 603,
604, 605, 606
Tool Name
Application
Model
INJECTION PUMP
Aligns injection pump for proper timing during removing and 601, 602, 603,
CENTERING SLEEVE installing of injection pump.
605, 606
- DIESEL
Page #21
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
09-Diesel
601-0521
606-0009
900-8673
916-0021
936-0223
B611-0421
3922 Murdock Ave
Tool Name
INJECTION PUMP
LOCK PIN - LATE
MODEL
Application
Locks diesel pump cam to maintain timing during pump
installation.
Model
601, 602,
603,605, 606,
617
Tool Name
Application
INJECTION NOZZLE se for removal and installation of diesel injection nozzle.
SOCKET - 22mm
Model
604, 605, 606
Tool Name
INJECTION PUMP
LOCK PIN - EARLY
MODEL
Model
615, 616, 617,
621
Application
Locks diesel pump cam to maintain timing during pump
installation.
Tool Name
Application
Model
VACUUM CONTROL Use to measure vacuum pressures to vacuum control valve. 616, 617.91,
ADJUSTING ROLLER
617.95
Tool Name
DIESEL DRIP TUBE
Application
Use to adjust start of fuel delivery.
Tool Name
COMMON RAIL
INJECTOR BACK
FLOW TESTER
Application
Model
Use to measure fuel return rate from injectors in common
Common Rail
rail diesels.
Diesel
Includes adapters and 6 graduate cylinders and 6 graduated
bottles.
Page #22
Model
615, 616, 617 to
1983
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
09-Diesel
H4550
KO4133
ST440-14
ST51-27
US2568
3922 Murdock Ave
Tool Name
Application
Special wrench for injection lines.
INJECTION LINE
CROWFOOT - 17mm
3/8"DR.
Model
615, 616, 617,
602, 642
Tool Name
Application
Model
SERRATED WRENCH Use to remove and install the injection pump stub pipe and 601, 602, 603,
SOCKET
pressure valve on diesel pumps.
605, 606, 617
Tool Name
Application
Use to access injection pipe cap nuts.
CROWFOOT
SOCKET - 14mm 3/8"
DRIVE
Model
601, 602, 603,
604, 605, 606,
611, 612, 613,
628, 640, 646,
647, 648, 661,
662, 668
Tool Name
DIESEL NOZZLE
SOCKET - 27mm
Application
Special 12 point 1/2" DR. socket with interior relief to
accommodate the small leakage return tubes on top of
injection nozzle. Also available in Hazet brand.
Model
601, 602,
603,612, 615,
616, 617, 646,
647, 648
Tool Name
DIESEL PUMP
MOUNT BOX
WRENCH - 13mm
Application
Model
Special ’L’ wrench to access injection pump mount screws. 601, 615, 616,
617
Page #23
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
13-V Belt
B9042
900-0307
AS4765
AS4955
15-Ingition
103-0037
3922 Murdock Ave
Tool Name
MERCEDES BENZ
FAN SERVICE KIT
Application
This 11 piece wrench set contains 32, 36, & 65mm
wrenches for removing fan clutch. Also contains fan clutch
holders and V8 fan belt service tools.
Tool Name
A/C IDLER PULLEY
Application
Model
Tool Name
SERPENTINE BELT SET
Model
All
Application
Belt remover/installer provides reach and maneuverability to thread the
belt around the pulley system. Includes 13mm, 14mm, 15mm, 16mm
and 18mm socket, plus 3/8" and 1/2" drives
Tool Name
Application
ALTERNATOR PULLY KIT Use to hold the pulley on the European alternators with a clutch.
Tool Name
SPARK PLUG WIRE
PLIERS
Application
Model
All
Use to remove the ’BERU’ type wires on late model cars.
Wide grip section and special angle make it easy to remove
plug wires without separating crimps.
Page #24
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
15-Ingition
B103-0037
112-0109
66US-16
66US-21
ST3047-12
3922 Murdock Ave
Tool Name
SPARK PLUG WIRE
PLIERS - EXTRA
LONG
Application
Model
All
Use to remove the ’BERU’ type wires on late model cars.
Wide grip section and special angle make it easy to remove
plug wires without separating crimps.
Tool Name
SPARKPLUG
SOCKET
Application
16mm 1/2 dr. socket with a universal joint
Model
112, 113, 137,
155, 166, 266,
271, 272, 273,
275, 902, 906
Tool Name
Application
SPARKPLUG
16mm (5/8") Sparkplug socket with internal magnet for use
SOCKET-MAGNETIC- on engines with deep seated peanut sparkplugs.
16mm
Model
M102, 103, 104,
111, 112, 113,
119, 120, 137,
272, 273, 275,
902, 903
Tool Name
Application
SPARKPLUG
20.8mm (13/16") Sparkplug socket with internal magnet for
SOCKET-MAGNETIC- use on engines with deep seated sparkplugs.
20.8mm
Model
M100, 110, 114,
115, 116, 117,
130, 180
Tool Name
GLOW PLUG
SOCKET - 12mm
Application
Model
Special deep 12mm socket for removing and installing glow 601, 602, 603,
plugs in tight spaces.
606
Page #25
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
18-Lubrication
120-0621
Tool Name
Application
Model
OIL LEVEL DIPSTICK Use to measure oil level and check length of oil dipstick
M103, 104, 111,
guide pipe in shop. See #115-1521 for tulip shaped flared oil 119, 120,
dipstick guide tubes found in early models.
OM603, 604,
605, 606
120-0721
103-0209
B1407
B6700
B6700ADJ
3922 Murdock Ave
Tool Name
Application
Model
OIL LEVEL DIPSTICK Use to measure oil level and check length of oil dipstick
M112, 113, 271,
guide pipe in shop. See #115-1521 for tulip shaped flared oil 272, 642, 646,
dipstick guide tubes found in early models. See #120-0621 647, 648
for vehicles 1996-2008. See 275-0021 for 12 cylinder
engine M275.
Tool Name
OIL FILTER WRENCH
- 14 POINT 74mm 3/8"
DRIVE
Application
Socket type filter remover for spin on oil filters and filter
housings. Reinforced construction and side lock bolts to
remove the most stubborn filters. Also see #H2172.
Model
M102, 103, 104,
111, 112, 113,
119, 120, 137,
155, 272, 275,
285, 611, 612,
613, 628, 646,
647, 648
Tool Name
Application
Model
OIL FILTER SOCKET 3 sockets set 27mm, 32mm and 36mm for oil filter housings 364, 366, 604,
SET
on Mercedes and Smart cars.
605, 606
Tool Name
JAWS OIL FILTER
REMOVER
Application
Special "vise-grip" action makes this the best oil filter
remover yet.
Model
All
Tool Name
ADJUSTABLE OIL
FILTER PLIERS
Application
Adjustable Oil Filter Pliers with pivoting jaws.
Model
All
Page #26
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
18-Lubrication
642-0009
B117-0207
604-0034
Tool Name
Application
BLUTECH OIL FILTER Use to remove the oil filter cap on the Bluetech diesel
WRENCH
engine. 84mm 14 flats
Model
642
Tool Name
OIL DRAIN WRENCH
- 14mm HEX X 13mm
BOX
Application
plugs. (#117-0207)
Model
M102, 103, 104,
110, 116, 117,
119, 120, 601,
602, 603, 604,
605, 615, 616,
617
Tool Name
OIL INJECTION
NOZZLE REMOVAL
CLAW
Application
Use to remove oil injection nozzle from crankcase in
combination with impact puller #602-0033.
Model
602, 603, 604,
605, 606
KO4012M-14
Tool Name
Application
OIL DRAIN SOCKET - Use to remove and install 14mm oil drain plugs in engine
14mm
and transmission. Sizes available 4, 5, 6, 8, 10, 12, 14, 17
and 19mm.
111-0034
3922 Murdock Ave
Tool Name
NOZZLE REMOVAL
CLAW
Model
M110, 115, 116,
117, 615, 616,
617
Application
Model
Removes oil injection nozzle from crankcase in combination M111
with impact puller #602-0033
Page #27
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
20-Engine Cooling
B9042
Tool Name
RADIATOR FAN
WRENCH SET
103-0040
113-0040
120-0201
113-0001
900-0307
3922 Murdock Ave
Application
This 11 piece wrench set contains 32, 36, & 65mm
wrenches for removing fan clutch. Also contains fan clutch
holders and V8 fan belt service tools.
Model
All
Tool Name
Application
Model
FAN HOLDING TOOL Use to hold fan pulley while loosening and tightening screws M103, 104
in viscosity fan couplings. Use with tool # 103-0109 or tool #
102-0308. Also see kit #B9042.
Tool Name
FAN CLUTCH
HOLDING TOOL
Application
Model
Holds pulley when removing and installing fan clutch. Use M111, 112, 113,
with open end wrench #111-0201 and torque wrench
119
#001-7221. (Replaces #119-0240 and #111-0040). Also see
kit #B9042.
Tool Name
Application
Model
FAN HUB WRENCH - Special open-end 65mm wrench for fastening fan hub. Also M103, 104, 119,
65mm
see kit #B9042.
120
Tool Name
FAN CLUTCH
WRENCH - 36 mm
OPEN-END
Application
Use to loosen and tighten fan clutch. Use with torque
wrench #ST730/5 and holding tool #113-0040.
Tool Name
A/C IDLER PULLEY
Application
Model
Page #28
Model
M111, 112, 113,
604
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
20-Engine Cooling
603-0040
B113-0001
ST3049-8
B1027
ST10623/1
ST12506
3922 Murdock Ave
Tool Name
PULLEY HOLDING
TOOL
Application
Use to hold water pump pulley while loosening and
tightening screws. Use with tool # 103-0109.
Model
602, 603, 604,
605, 606, 611
Tool Name
SPECIAL THIN
WRENCH - 36mm
Application
Model
Use to loosening and tightening of the fan coupling nut. Use All
with holding tool #113-0040. Also see kit B9042.
Tool Name
Application
SHORT HEX HEAD
Removes screws on viscosity fan couplings and pulley
SOCKET - 8mm X
facings. (#103-0109)
24mm LONG 3/8" DR.
Model
M103, 104, 119,
120, 602, 603,
605, 606
Tool Name
HOSE CLAMP
PLIERS - CORBIN
TYPE
Application
Special tips allow easy handling of ’Corbin clamps’ on
radiator and emission control hoses.
Model
All Late Models
Tool Name
CORBIN CLAMP
PLIERS
Application
Locking type pliers with rotating jaws to access even the
hardest to reach clamps. 290mm Long.
Model
All models
Tool Name
FLEXIBLE HOSE
CLAMP HEX NUT
DRIVERS
Application
Model
Use to remove hose clamps with worm-drive threads. Sizes All
5, 6, 7, 8 and 10mm available. Please specify size when
ordering. See # H798-5 for late model "Corbin" clamps.
7mm is the most common Mercedes size.
Page #29
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
20-Engine Cooling
ST1009DC
H2740
FZ20
FZ19
Tool Name
PULLEY MOUNT
BOLT WRENCH 10mm
Application
Model
Special 10mm Allen wrench 500mm long. Use to loosen and M116, 117, 119
tighten the mount bolts of the idler pulley when adjusting
v-belt of refrigerant compressor.
Tool Name
SWIVEL HEX HEAD
SOCKET - 6mm 3/8"
DR. LONG
EXTENSION.
Application
Removes and installs water pump hex head bolts.
Model
All
Tool Name
RADIATOR
RESERVOIR
ADAPTER
Application
This is the radiator reservoir adapter for testing reservoir
integrity. Models 1996 And later. (MB #210-589 009100)
Model
W124, 129,
140, 163, 170,
171, 199, 202,
203, 208, 209,
210, 211, 215,
219, 220, 221,
230, 240, 461,
463, 464
Tool Name
Application
RADIATOR ADAPTER Adapts US type radiator pressure testers to early model
- EARLY TYPE
radiators with large caps.
25-Clutch & Pedal Linkage
000-4731
Tool Name
Application
UNIVERSAL CLUTCH Use to center clutch disc with clutch pressure plate
CENTERING TOOL 15-28mm
3922 Murdock Ave
Page #30
Model
All before 1968
Model
W107, 123,
124, 126, 129,
140, 163, 168,
169, 170, 171,
201, 202, 203,
208, 209, 210,
211, 245.2, 414,
639
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
115-0723
Tool Name
CLUTCH GAUGE
C-26
986-1107
3922 Murdock Ave
Model
W107, 123,
124, 126, 129,
140, 163, 170,
201, 202, 203,
208, 210, 460,
461, 463
Tool Name
Application
CLUTCH ALIGNMENT Center pin for clutch pressure plate. Same as #201-0815.
PIN
26-Manual Transmission
111-0507
915-0107
Application
Inspection gauge for clutch wear.
Model
W124, 201,
203, 170
Tool Name
GROOVE NUT
SOCKET MAINSHAFT
Application
Removes transmission main shaft groove nut.
Model
G76/18,
G76/18A,
G76/27,
G76/27A,
G76/27-5
Tool Name
DRIVESHAFT
GROOVE NUT
SOCKET
Application
Removes the output shaft nut on manual transmissions.
Model
716.0/1/2,
717.0/40
Tool Name
MAINSHAFT/JOINT
FLANGE GROOVE
NUT SOCKET
Application
Removes groove nut on the main shaft and joint flange of
manual transmissions.
Model
G72
Page #31
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B117-0207
Tool Name
OIL DRAIN WRENCH
- 14mm HEX X 13mm
BOX
KO4012M
KK70-A
KK17-K
KK20-10
KK21
3922 Murdock Ave
Application
plugs. (#117-0207)
Model
716, 717
Tool Name
Application
Model
716, 717
OIL DRAIN SOCKET - Use to remove and install 14mm oil drain plugs in manual
14mm
transmissions. Sizes available 4, 5, 6, 8, 10, 12, 14, 17 and
19mm.
Tool Name
BALL BEARING
PULLER SET
Application
Complete set of ball bearing extractors for 6000-6013,
6200-621, 6300-6311 and 6403-6408 type bearings.
Replaces #000-9433 and #001-0233. Replacement arms
available.
Model
All
Tool Name
KUKKO BEARING &
GEAR PULLER KIT
Application
Special reinforced bearing separator and drive cross
member for removing bearing inner race from the drive
flange on rear wheel bearing. From Kukko of Germany.
Model
All
Tool Name
GEAR AND BEARING
PULLER - SLIDING
JAW
Application
Model
All
This 2 arm sliding jaw puller is ideal for transmission and
differential gears, ball bearings and tapered roller bearings.
For applications requiring longer arms see #KK1-250-P for
extra long arms (250mm long).
Tool Name
INTERNAL
EXTRACTORS
Application
Model
Large range of internal extractors for use with #KK22-1 and All
KK22-2. Sizes range from 5mm to 100mm in diameter.
Page #32
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
KK22-1
KK1-250-P
KK22-2
ST51-30
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY SMALL
Application
thru #KK21-5. (#000-3333)
Model
All
Tool Name
PULLER ARMS 250mm LONG (2)
Application
Extra long arms for puller #KK20-10 allows removal of
bearings and gears from long shafts, such as reverse and
5th gear.
Model
All
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY LARGE
Application
Large counter stay for use with Kukko extractor #KK21-3
thru #KK21-8.
Model
All
Tool Name
DRIVE FLANGE
SOCKET - 30mm
EXTRA DEEP
Application
12 point 1/2" DR. with thin walls and deep broaching for
collar nut on drive flange. Replaces #126-0209.
Model
711, 716, 717
Application
Use to fill the 722.9 transmission, along with VW/Audi and
other cars
Model
722.9
27-Automatic Transmission
B1924
Tool Name
ATF FILL PUMP KIT
3922 Murdock Ave
Page #33
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B140-1343
140-1521
168-0121
B9336A
B722-0315
B7200
Tool Name
TRANSMISSION
ASSEMBLY TOOL
Application
Model
Assembly device for snap ring on spring cup of B1, B2, K1, 722.6
K2 and K3.
Tool Name
FLUID LEVEL
DIPSTICK TRANSMISSION
Application
Use to determine fluid level of the 722.6 transmission.
Tool Name
Application
OIL LEVEL DIPSTICK For determining oil level height.
Model
716.5, 722.7,
722.8
Tool Name
Application
TRANSMISSION DIP Use to check the transmission fluid level on the Sprinter
STICK
vans
Model
Sprinter
Tool Name
OVERFLOW PIPE
REMOVER
Application
Model
Use to remove the overflow pipe on the 722.9 Transmission 722.9
Tool Name
Application
Use to install nylon shift shaft bushing.
SHIFT SHAFT
BUSHING INSTALLER
3922 Murdock Ave
Model
722.6
Page #34
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
ST51-30
915-0107
915-0807
986-1107
916-0011
112-0161
3922 Murdock Ave
Tool Name
DRIVE FLANGE
SOCKET - 30mm
EXTRA DEEP
Application
collar nut on drive flange.
Model
722.3, 722.4,
722.5, 722.6,
722.9
Tool Name
DRIVESHAFT
GROOVE NUT
SOCKET
Application
Removes the large type driveshaft nut on automatic
transmissions
Model
722.0, 722.1,
722.3
Tool Name
DRIVESHAFT
GROOVE NUT
SOCKET
Application
Removes the small driveshaft nut.
Model
722.0, 722.1,
722.3
Tool Name
DRIVESHAFT
GROOVE NUT
SOCKET
Application
Removes the driveshaft nut on swing axle.
Model
K4A025,
K4B050
Tool Name
Application
SECONDARY PUMP Use to remove the screw plug on the secondary pump.
SCREWDRIVER
Tool Name
CLUTCH PISTON
GUIDE SLEEVE
Model
K4C025,K4C02
5(rein.),
W4B025,
K4A040,
W3A040/270,
W3A040/310,
W3B050
Application
Model
Installs K1 (135mm) 134 ID, 136 OD clutch piston into outer K4A025,
disk carrier.
K4C025,
K4C025(rein),
722.1
Page #35
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
126-0314
126-0414
126-0431
126-0621
126-1014
129-0623
3922 Murdock Ave
Tool Name
Application
CLUTCH PISTON
Use to guide the clutch piston K1 (127 mm) and K2 into
INSTALLING SLEEVE outer disk carrier (Use with sleeve #201-0214).
Model
722.3, 722.5
Tool Name
REVERSE GEAR
PISTON GUIDE
SLEEVE
Application
Use to guide the reverse gear piston into front cover.
Model
722.3, 722.5
Tool Name
AXIAL PLAY
PARALLEL REST
Application
Use to measure axial play on front and rear planetary gear
set.
Model
722.3, 722.4,
722.5
Tool Name
Application
MEASURING SCREW For checking free travel on brake band piston B1.
Model
722.3, 722.5
Tool Name
CLUTCH PISTON
GUIDE SLEEVE
Application
Use to guide the clutch piston K1 (118 mm) into the outer
disk carrier (Use with sleeve #140-0014).
Model
722.3, 722.5
Tool Name
GAUGING DISK
Application
3GAUGING DISK For measuring axial play on rear
planetary gear set. (HCB A1037-2)
Model
722.3, 722.4,
722.5
Page #36
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
140-0014
201-0114
208-0021
201-1243
201-0359
201-0214
3922 Murdock Ave
Tool Name
CLUTCH PISTON
GUIDE SLEEVE
Application
For guiding clutch piston K1 and K2 into the outer disk
carrier. (Use with sleeves #126-0314 and #126-1014).
Model
722.3, 722.5
Tool Name
CLUTCH PISTON
GUIDE SLEEVE
Application
Installs K1 (135mm) clutch piston into outer disk carrier. 4
speed.
Model
722.4
Tool Name
CLUTCH PACK
COMPRESSOR
Application
Compresses clutch packs K1, K2, K3 and brake bands B1
and B2. 1000N.
Model
722.6, 722.8,
722.9
Tool Name
SNAP RING
ASSEMBLY TOOL
Application
Installs snap ring on spring plate for K1, K2, B3.
Model
722.3, 722.4,
722.5
Tool Name
BRAKE BAND
PISTON LOADER
Application
Assembly tool for brake band piston B1.
Model
720.1, 722.0,
722.1, 722.3,
722.4, 722.5
Tool Name
GUIDE SLEEVE
Application
Use to guide reverse gear piston into front cover. 4 speed.
Model
722.4
Page #37
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
201-0721
KK70-A
KK17-K
KK20-10
KK1-250-P
KK21
3922 Murdock Ave
Tool Name
BRAKE BAND
PISTON GAUGE
Application
Measuring screw with plate for free travel on brake band
piston B1.
Model
722.4
Tool Name
BALL BEARING
PULLER SET
Application
Complete set of ball bearing extractors for 6000-6013,
6200-621, 6300-6311 and 6403-6408 type bearings.
Replaces #000-9933 and #116-0733. Replacement arms
available.
Model
All
Tool Name
KUKKO BEARING &
GEAR PULLER KIT
Application
Special reinforced bearing separator and drive cross
member for removing bearing inner race from the drive
flange on rear wheel bearing. From Kukko of Germany.
Model
All
Tool Name
GEAR AND BEARING
PULLER - SLIDING
JAW
Application
Model
All
Tool Name
Application
250mm extension arms, compatible with all 20 and 30
series Kukko pullers
Tool Name
INTERNAL
EXTRACTORS
Application
Model
Page #38
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
KK22-1
KK22-2
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY SMALL
Application
thru #KK21-5. (#000-3333)
Model
All
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY LARGE
Application
thru #KK21-8.
Model
All
Tool Name
SUSPENSION
SPRING
COMPRESSOR
Application
SUSPENSION SPRING COMPRESSOR
Model
W116, 123,
124, 126, 129,
140, 170, 201,
202, 208, 210,
211
Tool Name
MACPHERSON
STRUT SPRING
COMPRESSOR
Application
Compresses all types of Macpherson style coil springs front
and rear. Includes three sets of jaws (2) for 110, 120 and
130mm springs found in most Mercedes.
Model
W163, 164,
171, 210, 211,
219, 230, 245,
251
Tool Name
MACPHERSON
STRUT VICE
ADAPTER
Application
This vice adapter holds the Macpherson strut when off the
vehicle.
Model
All
32-Suspension
924-0231
1117J
1117V
3922 Murdock Ave
Page #39
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
32-Suspension
220-0061
900-0007
203-0007
211-0009
211-0763
221-0031
3922 Murdock Ave
Tool Name
AIRMATIC STRUT
SEAL REMOVER
Application
Model
Use to remove the top seal on the front Airmatic suspension W220
strut.
Tool Name
RESIDUAL
PRESSURE VALVE
SOCKET
Application
Model
W220
Use to remove and install the residual pressure valve on
front-axle air suspension strut (Airmatic). Double sided tool.
1/4" drive. See #211-0009 for E class. Replaces #220-0009.
Tool Name
Application
SUSPENSION STRUT Pin wrench socket for the removal of the suspension strut
SOCKET
retainer nut.
Model
W203
Tool Name
SLOTTED SOCKET
BIT - 10mm
Model
164, W211,
219, 240, 251
Application
Use to remove and install air suspension line screw joints.
Tool Name
Application
EMERGENCY
Use to move vehicle when Airmatic system is disabled
BUMBERS FRONT & during repair.
REAR
Model
W211, 219
Tool Name
EMERGENCY
BUMBERS- SET
Model
W221
Application
Use to move vehicle when Airmatic system is disabled
during repair.
Page #40
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
32-Suspension
QP1000
KK129-0
ST20-17x19
33-Front Axle
B220/163
116-0462
3922 Murdock Ave
Tool Name
TORSION BAR
SAVER
Application
Torsion bar savers allow replacement of the torsion bar
ends with torsion bar still in place in the vehicle.
Tool Name
UNIVERSAL BALL
JOINT PULLER
2-STAGE
Application
Model
All
Scissor type puller allows access to difficult to reach and
obstructed ball joints. 2-stage action allows removal of
spindles up to 50mm in length. Mfg. by Kukko of Germany.
Tool Name
DOUBLE OFFSET
WRENCHS - 75
degree
Application
17X19mm - Use with #H2594 to adjust shock absorber
damper tension. Special deep offset box end wrenches.
Use to adjust shock absorber retainer nuts.
Model
All
Tool Name
MERCEDES BENZ
BALL JOINT KIT
Application
Use to remove and install ball joints.
Model
W163, W164,
W211, W220,
W230, W215
Tool Name
BALL JOINT PRESS
Application
Model
Presses the ball joint into steering knuckle while the knuckle W116, 123, 126
is in place on the car.
Page #41
Model
W123, 126
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
33-Front Axle
124-0543
126-0143
220-0061
B129-0343
B140-1143
B202-0143
3922 Murdock Ave
Tool Name
BALL BEARING
REMOVER &
INSTALLER TOOL
Application
Model
Puller and installer tool for angular ball bearing from steering W124.2, 124.3
knuckle. (4MATIC)
Tool Name
LOWER WISHBONE
REMOVER &
INSTALLER TOOL
Application
Puller and installation tool for rubber mounts-lower
wishbone. Also see #B129-0043.
Tool Name
AIRMATIC STRUT
SEAL REMOVER
Application
Model
Use to remove the top seal on the front Airmatic suspension W220
strut.
Tool Name
LOWER WISHBONE
SUPPORT JOINT
R&R TOOL
Application
Use to Remove and install lower ball joint support on the
wishbone. Replaces #107-0143.
Model
W116, 123,
124, 126, 201
Model
W124, 129, 201
Tool Name
Application
BEARING RACE AND Installs bearing outer race and radial seal ring of front axle
SEAL RING
hub.
INSTALLER
Model
W140
Tool Name
LOWER CONTROL
ARM BUSHING KIT
FRONT & REAR W202
Model
W170, 202, 208
Application
Removal and installation tool for rear rubber mount on the
lower wishbone for W170 and W202 chassis. Also installs
front mount on W208 chassis.
Page #42
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
33-Front Axle
B210-0043
220-0343
B220-0643
385-0007
KK128-2
KK129-0
3922 Murdock Ave
Tool Name
LOWER CONTROL
ARM BUSHING KIT
FRONT & REAR W210
Application
Puller and installation tool for rubber mount front & rear
lower wishbone mount.
Model
W210
Tool Name
BALL JOINT
INSTALLATION
PRESS
Application
Use to install the ball joint into the steering knuckle on late
model S, E, CLK, CLS and SL class.
Model
W211, 215,
219, 220, 230
Tool Name
TORQUE STRUT
BUSHING KIT
Application
Use to replace the sub frame bushings on the torque strut
control rods.
Model
W171, 203,
209, 211, 215,
220, 230
Tool Name
GROOVE NUT
SOCKET
Application
Model
W163
Use to remove and install the retaining nut on the supporting
joint of the bottom wishbone in the front and rear axle.
Tool Name
Application
TIE ROD BALL JOINT Puller for separating tie rod and steering knuckle ball joints
PULLER - 23-32mm without tearing ball joint boots. Mfg. by Kukko of Germany.
Tool Name
UNIVERSAL BALL
JOINT PULLER
2-STAGE
Model
All
Application
Model
All
Page #43
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
35-Rear Axle
B234MASTER
Tool Name
Application
UNIVERSAL
Hydraulically driven, this kit quickly pushes the axle out of
HYDRAULIC AXLE
the hub, and removes the hub. Pump not included
AND SLIDE HAMMER
EXTRACTOR
B90K
B140-0333
B201-1143
B210-0243
966-0043
3922 Murdock Ave
Model
All
Tool Name
Application
Model
WHEEL BEARING KIT Use to remove and install wheel bearings on out of the hub All
on the car
Tool Name
REAR AXLE
CARRIER BUSHING
MOUNT R & R Kit
Application
Use to remove and install the front and rear rubber sub
frame mount on the rear axle carrier.
Tool Name
REAR AXLE
CARRIER MOUNT
REMOVER &
INSTALLER KIT
Application
Model
Puller and installation tool for front and rear rubber mount
W124, 129,
from rear axle carrier. See #202-0343 for 170, 202, and 208 201
chassis.
Tool Name
DIFFERENTIAL
MOUNT BUSHING
REPLACEMENT KIT
Application
Model
Use to remove and install rubber differential mount bushings W210
in the center of rear axle assembly.
Tool Name
DIFFERENTIAL
MOUNT BUSHING
REPLACEMENT KIT
Application
Use to remove and install the rear differential mount
bushings.
Page #44
Model
W140, 220
Model
W124, 140
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
35-Rear Axle
124-0543
201-0009
111-0507
385-0007
915-0107
915-0207
3922 Murdock Ave
Tool Name
WHEEL BEARING
REMOVER &
INSTALLER TOOL
Application
Puller and installer tool for wheel bearing in wheel carrier
and installation of rear axle shaft flange.
Model
W124, 129,
163, 170, 201,
202, 203, 208,
209, 210.
Tool Name
Application
PINION FLANGE
Pinion joint flange 12 point socket. Use to remove special
SOCKET - 27mm 3/4" retaining nut in late model cars.
DRIVE
Model
W124, 170,
201, 202, 210
Tool Name
GROOVE NUT
SOCKET - SWING
AXEL
Application
Removes swing axle flange groove nuts.
Model
W108, 109,
110, 111, 113
Tool Name
GROOVE NUT
SOCKET
Application
Model
W163
Use to remove and install the retaining nut on the supporting
joint of the bottom wishbone in the front and rear axle.
Tool Name
Application
Model
REAR AXLE FLANGE Differential drive pinion flange groove nut socket for use on W107, 114,
GROOVE NUT
models with constant velocity joint axels.
115, 116, 123
SOCKET
Tool Name
REAR AXEL
BEARING GROOVE
NUT SOCKET
Application
Rear axle bearing retainer groove nut socket.
Page #45
Model
W107, 114,
115, 116, 123,
126
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
35-Rear Axle
B117-0207
KK21
KK22-1
KK22-2
Tool Name
OIL DRAIN WRENCH
- 14mm HEX X 13mm
BOX
Application
plugs. (#117-0207)
Tool Name
INTERNAL
EXTRACTORS
Application
Model
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY SMALL
Application
thru #KK21-5. (#000-3333)
Model
All
Tool Name
INTERNAL
EXTRACTOR
COUNTER STAY LARGE
Application
thru #KK21-8.
Model
All
KO4012M-14
Tool Name
Application
OIL DRAIN HEX
Short body allows easy removal of oil, differential and
HEAD SOCKET 14mm transmission drain plugs.
1/2" DRIVE
ST3004
3922 Murdock Ave
Model
W107, 123,
124, 126, 129,
140, 170, 201,
202, 208, 210,
220
Model
All
Tool Name
Application
Model
W215, 220
HEX HEAD SOCKET XZN Hex Head Socket-12mm x 55mm 1/2" drive with
12mm XZN X 55mm special short format for rear axle spring link. (119-589-0010)
1/2"DR.
Page #46
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
35-Rear Axle
ST51-30
Tool Name
DRIVE FLANGE
SOCKET - 30mm
EXTRA DEEP
Application
collar nut on drive flange.
40-Wheels and Tires
M0030
M0030A
Tool Name
Application
WHEEL ALIGNMENT Use in place of 2 lug bolts to hold wheel in place while
GUIDES
installing other lug bolts 12X1.5mm
Model
Check lug for
size
Tool Name
Application
WHEEL ALIGNMENT Use in place of 2 lug bolts to hold wheel in place while
GUIDES
installing other lug bolts 14X1.5mm.
Model
Check lug for
size
MBWHEELKIT
341C
3922 Murdock Ave
Model
W107, 123,
124, 126, 129,
140, 168, 170,
201, 202, 208,
210, 463
Tool Name
WHEEL RING
SOCKET SET
Application
Special Decagon (10 sided) sockets for removal of triplet
aluminum alloy steel ring on special SL wheels.
Tool Name
TOE IN GAUGE
Application
Model
Universal toe-in gauge allows quick and easy adjustment of All
front end toe without the use of a lift.
Page #47
Model
W230
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
40-Wheels and Tires
124-1763
B2309KIT
Tool Name
WHEEL WEIGHT
TOOL
Application
Special tool for the removal and installation of wheel
weights.
Model
All
Tool Name
LUG SOCKET SET
Application
3 Pc Lug Socket Set 17mm 19mm 21mm
Model
All
41-Drive Shaft
T9A-41
Tool Name
Application
VERY THIN WRENCH Use to remove driveshaft lock nuts.
- 41mm
T9A-46
T9A-SET
3922 Murdock Ave
Model
107, 108, 109,
111, 113, 114,
115, 116, 123,
126, 201
Tool Name
Application
Model
VERY THIN WRENCH Use to remove driveshaft lock nuts. See # T9A-41 Also see 107, 108, 109,
- 46mm
#T9A-SET.
111, 113, 114,
115, 116, 123,
126
Tool Name
Application
Model
VERY THIN WRENCH Set of 6 very thin wrenches for use in a variety of situations. All
SET
Sizes 24mm, 27mm, 32mm, 36mm, 42mm, 46mm
Page #48
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
41-Drive Shaft
KK20-10
KK1-250-P
42-Brakes
000-3523
112-0961
116-0162
3922 Murdock Ave
Tool Name
GEAR AND BEARING
PULLER - SLIDING
JAW
Application
Model
All
Tool Name
Application
Model
All
PULLER ARMS - 250mm LONG (2)Extra long arms for
puller #KK20-10 allows removal of bearings and gears from
long shafts, such as reverse and 5th gear.
Tool Name
BRAKE PISTON
ANGLE GAUGE - 20
DEGREE 38mm &
35mm
Application
Use to set the brake piston angle on 35mm & 38mm
diameter pistons.
Model
W107, 114,
115, 116, 123,
124, 126, 129,
140, 201, 202
Tool Name
BRAKE SPRING
INSTALLER
Application
Use to replace parking brake pressure spring.
Model
All
Tool Name
PARKING BRAKE
SPRING HOOK
Application
Use to remove and install parking brake return spring.
Model
All
Page #49
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
42-Brakes
H797
KK126-00
KK126-01
KK126-02
KK126-03
ST12373
3922 Murdock Ave
Tool Name
BRAKE SPRING
PLIERS
Application
Model
Use to remove and install brake shoe check spring on glued Most
or riveted brakes. Moveable claw locks in any position
desired.
Tool Name
PISTON CALIPER
PRESS
Application
Use to press calipers back into assembly for easy
installation of pads.
Model
All
Tool Name
BRAKE PAD
EXTRACTOR
Application
Use to pull out brake pads from caliper body.
Model
All
Tool Name
BRAKE PISTON
CLAMP
Application
Model
Use to hold the brake piston/caliper assembly with the brake All
hose attached during assembly or removal.
Tool Name
BRAKE PISTON
TURNING PLIER
Application
Use to rotate piston caliper during installation.
Model
All
Tool Name
BRAKE CALIPER
BRUSH
Application
Wire brush for cleaning of fixed brake calipers and shoes.
Model
All
Page #50
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
42-Brakes
ST440-14
46-Steering
B900-0059K
900-0059
900-0059K
210-0007
3922 Murdock Ave
Tool Name
Application
Use for SBC hydraulic lines.
CROWFOOT
SOCKET - 14mm 3/8"
DRIVE
Model
W211, 215,
219, 220, 230,
240
Tool Name
Application
IGNITION AND DASH Kit includes early and late model ignition switch cover
KIT
grippers, retainer nut socket (6/97 and newer), ignition lock
release pins, dash removal hooks and radio release keys.
Model
W126, 129,
140, 163, 170,
202, 210, 211,
220, 230, 240,
414, 463
Tool Name
IGNITION LOCK
RELEASE WIRES
Application
Model
Wires allow depression of lock retainers for easy removal of W126, 124,
ignition switch. Use with tool # 126-0714 or #202-0014
129, 140, 201,
210
Tool Name
DASHBOARD
SERVICE TOOL KIT
Application
Ignition Lock Removal Pins - 124, 126, 201, Dash Hooks
-107, 116, 123, 124, 126, 140, 201, Radio Removal Keys 129, 140, 202, 210.
Model
W107, 123,
124, 126, 129,
140, 201
Tool Name
IGNITION LOCK
COVER REMOVER
Application
Special socket for removal of ignition lock cover. Replaces
Mercedes #129 589 00 007 00.
Model
W129, 140,
164, 169, 171,
199, 202, 203,
208, 209, 210,
211, 215, 219,
220, 221, 230,
240, 245, 251,
414
Page #51
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
46-Steering
202-0014
126-0714
ST1445
ST1295
116-0621
201-0621
3922 Murdock Ave
Tool Name
Application
IGNITION LOCK
Use to aid in removal and installation of the ignition lock
REMOVING SLEEVE cover. Also see #210-0007
Model
W126, 129,
140, 163, 170,
202, 210, 414
Tool Name
IGNITION LOCK
COVER REMOVER
Application
Rubberized interior allows easy turning of inner lock cover
particularly on W126-and 124 chassis. Use with tool #
900-0059.
Model
W116, 123,
124, 126, 201
Tool Name
TAMPER PROOF
TORX BIT - T30
Application
Special bit for R&R of screws on airbag control units and
sensor mounts.
Model
W124, 126,
129, 201
Tool Name
TORX - T30 X 90mm
LONG ST1295
Application
Use to remove screws holding Airbag cover on steering
wheel.
Model
All
Tool Name
Application
STEERING POSITION Use to center steering gear for correct positioning of
CHECK SCREW
steering wheel during installation.
Model
W107, 114,
115, 116, 123,
126 (LS90, L1Z)
Tool Name
Application
CHECK SCREW
Model
W124, 201,
(LS68)
Page #52
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
46-Steering
201-0821
202-0133
KK128-2
KK129-0
KK204-1
3922 Murdock Ave
Tool Name
Application
CHECK SCREW
Model
W107, 114,
115, 123, 201
(LS1, L1Z,
LS68)
Tool Name
Application
Model
DRAG LINK PULLER Use to remove drag link ball joint. Use with pad #129-1063. W202
Tool Name
Application
TIE ROD BALL JOINT Puller for separating tie rod and steering knuckle ball joints
PULLER - 23-32mm without tearing ball joint boots. Mfg. by Kukko of Germany.
Model
All
Tool Name
UNIVERSAL BALL
JOINT PULLER
2-STAGE
Application
Model
All
Tool Name
PITMAN ARM
PULLER
Application
Heavy duty puller with reinforcing cross member for
removing pitman arms and drag link arms.
Page #53
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
47-Fuel Supply
163-0037
202-0007
203-0107
210-0107
M0035A
202-0190
3922 Murdock Ave
Tool Name
FUEL PIPE
CONNECTION
PLIERS
Application
Allows quick release of fuel pipe connections (quick
couplers), particularly the fuel pump connection to delivery
sensor unit.
Model
W163, 203
Tool Name
FUEL SENDER PIN
WRENCH
Application
Use to remove fuel sender retainer nut.
Model
W202
Tool Name
Application
FUEL TANK SENDER Use to remove and install the locking ring of the fuel tank
SPIDER WRENCH
delivery sensor unit.
Model
W163, 203
Tool Name
Application
FUEL TANK SENDER Pin wrench for removing and installing lever-type fuel level
PIN WRENCH - 5mm sensor.
Model
W140, 210
Tool Name
Application
GAS TANK SOCKET - Use to remove fuel tank filter body and fuel gauge sending
46mm
units.
Model
All
Tool Name
TANK CAP WITH
PRESSURE HOSE
Model
W202
Application
Use to facilitate pressure build-up.
Page #54
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
54-Instrument Cluster
B900-0059K
110-0059
140-0233
129-0109
140-0133
B1630
3922 Murdock Ave
Tool Name
Application
KIT
Model
W126, 129,
140, 163, 170,
202, 210, 211,
220, 230, 240,
414, 463
Tool Name
PULLING HOOK
Application
Wide flat hook for instrument clusters on older models.
Model
W107, 108,
109, 111, 114,
115, 116, 123,
125
Tool Name
INSTRUMENT
CLUSTER PULLER
HOOKS (2 PIECES)
Application
Use to remove and install instrument cluster.
Model
W124, 126,
129, 140, 168,
170, 201, 202,
208, 210, 463
Tool Name
BULB HOLDING
TOOL
Application
Model
Use to remove and install socket bulbs in instrument cluster W129, 140,
without having to remove complete instrument cluster.
163, 170, 202,
208, 210, 220
Tool Name
MOUNTING LEVER
Application
For module from module box.
Model
W124, 129, 140
Tool Name
Application
Model
RESISTANCE
Resistance substitution box allows testing and calibration of All
SUBSTITUTION BOX dash gauges, injection system sensors, cruise control, and
anti theft systems. (#124-0963)
Page #55
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
140-1221
140-1321
ST1520
Tool Name
CLOSED-CIRCUIT
CURRENT TEST
ADAPTER 1
Application
Model
Closed-circuit current test adapter 1 for testing closed-circuit R129 as of
current consumption of electric circuit
1.9.95, W140,
163, 168, 170,
202, 208, 210,
220
Tool Name
CLOSED-CIRCUIT
CURRENT TEST
ADAPTER 2
Application
For checking closed-circuit current consumption of electric
circuit (for maxi-flat pin fuses).
Tool Name
KABLEX
CONNECTOR KIT MERCEDES
Application
Model
Includes: Round contact pin extractor 1.5mm & 2.5mm, Flat All
plug contact removers for 2.8mm, 2-prong contacts 5.8mm,
1.6mm Micro-Timer II and !II, 9.5mm Maxi-Power Timer,
5.5, 8,5mm and twin secondary lock device and E-95
extractor.
82-Electrical Equipment
B1594
Tool Name
CONNECTER TEST
KIT
B1630
3922 Murdock Ave
Application
Use to safely probe out different plug components and
control units.
Model
R129 as of
1.9.95, W140,
163, 168, 171,
202, 208, 210,
220
Model
All
Tool Name
Application
Model
RESISTANCE
Page #56
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B900-0059K
B9059M
900-0059K
963-0105
V8695
611250
3922 Murdock Ave
Tool Name
Application
KIT
Model
W126, 129,
140, 163, 170,
202, 210, 211,
220, 230, 240,
414, 463
Tool Name
MASTER RADIO
REMOVAL KIT.
Application
Contains all tools needed to remove models from 1990 to
the present.
Model
All
Tool Name
DASHBOARD
SERVICE TOOL KIT
Application
Ignition Lock Removal Pins - 124, 126, 201, Dash Hooks
-107, 116, 123, 124, 126, 140, 201, Radio Removal Keys 129, 140, 202, 210.
Model
W107, 123,
124, 126, 129,
140, 201
Tool Name
RADIO REMOVAL
TOOLS
Application
Use to remove and install radios. Also part of #B9059M
Model
1990 and newer
Tool Name
Application
Model
This tool is equipped with the same connector and is of the All with airbags
SRS TEST RESISTOR
same resistance as the air bag module. Use to test for faulty
airbags.
Tool Name
RELAY PLIERS
Application
Model
Allows easy removal of ’BOSCH’ relays in even the tightest All
locations.
Page #57
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
129-0005
126-0007
B57BG-E
B57BG-M
KK43-2
ST1520
3922 Murdock Ave
Tool Name
Application
REMOVAL PLATE (2 Use for removal of radio Also part of #B9059M
PIECES)
Model
R129
Tool Name
Application
ANTENNA SPANNER Antenna mast mounting nut.
WRENCH
Model
W107, 123, 126
Tool Name
WIRE TERMINAL
AND CONNECTOR
CRIMPING KITECONOMY
Application
This kit includes the basic crimper and 3 interchangeable
crimping heads.
Model
All
Tool Name
Application
WIRE TERMINAL
This kit includes the basic crimper and 5 interchangeable
AND CONNECTOR
crimping heads, plus a wire stripper.
CRIMPING - MASTER
KIT
Model
All
Tool Name
BEARING & RACE
PULLER
Application
Small puller for use on battery terminals, small gears and
bearings.
Model
All
Tool Name
KABLEX
Application
Model
extractor.
Page #58
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
83-Heating & Air Conditioning
203-0010
ST440-14
ST440-17
ST440-19
ST440-22
ST440-24
3922 Murdock Ave
Tool Name
Application
Used to remove and install screw plug on condenser fluid
CONDENSOR FLUID
reservoir.
RESERVOIR SOCKET
Model
W171, 203, 209
Tool Name
Application
Use to access hard to reach A/C expansion valves.
CROWFOOT LINE
WRENCH - 14mm 3/8"
DRIVE
Model
M107, 123, 124,
126, 140, 170,
201, 202, 203,
210, 215, 220,
461, 463
Tool Name
Application
CROWFOOT LINE
WRENCH - 17mm 3/8"
DRIVE
Model
M107, 123, 124,
126, 140, 170,
201, 202, 203,
210, 215, 220,
461, 463
Tool Name
Application
CROWFOOT LINE
WRENCH - 19mm 3/8"
DRIVE
Model
M107, 123, 124,
126, 129, 140,
170, 201, 202,
203, 210, 215,
Tool Name
Application
CROWFOOT LINE
WRENCH - 22mm 3/8"
DRIVE
Model
M107, 123, 124,
126, 129, 140,
170, 201, 202,
203, 210, 215,
Tool Name
Application
CROWFOOT LINE
WRENCH - 24mm 3/8"
DRIVE
Model
M107, 123, 124,
126, 140, 170,
201, 202, 203,
210, 215, 220,
461, 463
Page #59
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B-Body - General
140-0233
Tool Name
INSTRUMENT
CLUSTER PULLER
HOOKS (2 PIECES)
B2014
B277-477
AS4750
28DBC
Model
W208, 168,
170, 210
Tool Name
Application
PANEL POPPER KIT Set of 4 panel poppers for removing panels and trim on all
types of vehicles.
Model
All
Tool Name
PLASTIC WEDGE
SET
Application
Use to remove wood and plastic trim pieces, door panels
and dashboard without damage.
Model
All
Tool Name
5-POINT TAMPER
PROOF (TBI) BIT
SET
Application
Use on air mass meter elements, transmissions, Ignition
locks.
Model
All
Tool Name
HEAVY DUTY STUD
REMOVAL KIT
Application
Model
All
Ideal for pulling threaded studs with a heavy duty impact
wrench. Kit includes: bolt, sleeve and 14 collets Collet sizes
include: 6x1.0, 7x1.0, 8x1.0 ,8x1.25, 9x1.0, 9x1.25, 10x1.25,
10x1.50, 12x1.25, 12x1.50, 14x1.50, 14x2.0, 16x1.5,
16x2.0mm.
H2715-20H5
Tool Name
T-HANDLE 5PT
TAMPER PROOF
3922 Murdock Ave
Application
Use for various assembly/disassembly jobs, such as,
removing clipped panels and covers
Application
Use to remove and install mirror mounts.
Page #60
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
B-Body - General
T9A-SET
Tool Name
Application
Model
VERY THIN WRENCH Set of 6 very thin wrenches for use in a variety of situations. All
SET
Sizes 24mm, 27mm, 32mm, 36mm, 42mm, 46mm
D-Diagnostics
SDS-COMPACT4
Tool Name
Application
Model
STAR DIAGNOSTIC Mercedes factory diagnostic system. Includes DAS and WIS All from 1988 to
SYSTEM - COMPACT systems.
current
4
DS2020
DS2021
OBD2-500
3922 Murdock Ave
Tool Name
DATA SCANNER
Application
Model
Complete Mercedes Benz Scan Tool is a multi use scanner Call for current
covering ECM, PCM, ABS, SRS, HVAC, Immobilizer,
coverage
Instrument cluster and more for a variety of vehicle makes.
Supports activation, basic setting reset, Fault codes, plus
multimeter and lab scope
Tool Name
DATA SCANNER
Application
Model
Complete Mercedes Benz Scan Tool is a multi use scanner Call for current
covering ECM, PCM, ABS, SRS, HVAC, Immobilizer,
coverage
Instrument cluster and more for a variety of vehicle makes.
Supports activation, basic setting reset, Fault codes.
Tool Name
Application
Model
OBD-II / EOBD FAULT
All models 1996
Quick scan reads and resets OBD-II and EOBD fault codes
CODE READER
- Current
live data, freeze frame, ands all SAE OBD-II modes 1 thru 9.
SAE1850, ISO and CAN protocols. Comes with instruction
manual with over 2000 mfg. fault code definitions.
Page #61
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
D-Diagnostics
OBD2-309
Tool Name
Application
Model
OBD-II / EOBD FAULT Quick scan reads and resets OBD-II and EOBD fault codes. All models 1996
CODE READER
Comes with instruction manual with over 2000 fault code
- Current
definitions.
DBL800
B70A
OBD2-BOB
38PINBOB
B140-1463A
3922 Murdock Ave
Tool Name
DEUTRONIC POWER
SUPPLY/BATTERY
CHARGER
Application
Model
Microprocessor controlled charger/power supply to maintain All Models
power levels during programming and diagnostics.
Microprocessor controlled charging, measuring and
monitoring. Built-in interface for computer, programming
unit, printer and large display. Mercede
Tool Name
70 AMP POWER
SUPPLY
Application
Provides "clean" power for reprogramming and coding.
Maintains stable battery voltage from 13.6 to 14.4 volts.
Model
All
Tool Name
OBD-II BREAK OUT
BOX
Application
This J1962 break out box allows access to all wires in the
OBD-II Diagnostic Interface This makes it easy to trace
CAN Bus faults, Power supply problems and track failed
diagnostic controllers.
Model
All Models from
1996 to the
present.
Tool Name
38 PIN BREAK-OUT
ADAPTER
Application
Model
Allows easy access to the 38-pin diagnostic socket when
W129, 140,
using scanners DS2020, DS2021 or with a standard DMM. 170, 202, 203,
208, 210, 220
Tool Name
38 PIN X 38 PIN 7’
EXT CABLE
Application
Extension cable allows use of test equipment while driving
or on dynamometer.
Page #62
Model
W124, 129,
140, 202, 208,
210
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
D-Diagnostics
B1630
Tool Name
Application
Model
RESISTANCE
BT7205J
102-0463
Tool Name
TERMINATOR
Application
Model
All
The Terminator is a superior Logic probe combining the
features of a DMM and oscilloscope but simplifying the
display for technicians that want to find the pulse but don't
need the to see the trace. Particularly useful for tracing CAN
signals.
Tool Name
TEST HARNESS EHA
Application
Tests CIS-E electronic idle speed control with standard
multimeter. (VOM-DMM)
CODEBRAKER
K-Kablex
ST1520
3922 Murdock Ave
Model
W102, 103,
112, 113, 116,
117
Tool Name
CODE BREAKER
OBDII DIAGNOSTIC
BOOK
Application
Model
The “Code Breaker” is the only publication available with
All Models from
more than 2700 fault code numbers with detailed description 1996 to the
and repair suggestions all lined up in an easy to reference present.
format.
Tool Name
KABLEX
Application
Model
extractor.
Page #63
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
K-Kablex
ST1501/1511
Tool Name
CONTACT
EXTRACTOR
(ROUND) - 1.5mm
ST1504/1514
Tool Name
CONTACT
EXTRACTOR
(ROUND) - 2.5mm
ST1553
ST1584
ST1585
ST1586
3922 Murdock Ave
Application
Model
All
Application
Model
All
Use to remove the round contacts with locking feathers.
Replaceable tips available as #ST1511. Also in kit #ST1550.
Use to remove the round contacts with locking feathers.
Replaceable tips available as #ST1514. Also in kit #ST1550.
Tool Name
Application
Model
CONTACT
Use to remove double size flat contacts with single release All
EXTRACTOR (FLAT) - channel.
2.8, 5.8mm
Tool Name
Application
Model
All
CONTACT
Use to release round soldered terminals from sockets.
EXTRACTOR
Center channel allows easy routing of wire without damage.
(ROUND SOLDERED)
- 4.0mm
Tool Name
Application
Model
All
CONTACT
Use to release round soldered terminals from sockets.
EXTRACTOR
Center channel allows easy routing of wire without damage.
(ROUND SOLDERED)
- 2.5mm
Tool Name
Application
CABLE CONNECTOR Use to release secondary locking devices of relay panels
EXTRACTOR and junction boxes on DaimlerChrysler models.
LARGE TWIN
Page #64
Model
All
Sarasota, FL 34231
Phone: 941-927-1414 Fax: 914-927-1612
MERCEDES BENZ TOOLS
K-Kablex
ST1587
ST1588
ST1591
3922 Murdock Ave
Tool Name
Application
CONTACT
DBGM, for flat plug-in sockets using E-95 contacts.
EXTRACTOR (FLAT) - (#210-0133)
E-95
Model
All
Tool Name
FUSE CONTACT
EXTRACTOR
Application
Model
Use to remove the Grote Hartmann GSK-Flat Fuse Contacts All
(1-, 2-, 3 terminal version; 2, 4 and 6 locking tongues).
(#202-0333)
Tool Name
CONTACT
EXTRACTOR (2 PIN
DBGM) - 2.8, 5.8mm
Application
Use to remove flat plug-in sockets in terminals with two
release channels. (#210-0233)
Page #65
Model
All
Sarasota, FL 34231
Table of Contents
01-General Engine
117-0223
TS1015
TS10155
H992LG-T55
ST1054-10
ST1054-5
ST1054TXT55
ST3004
ST3054/8L
ST3054X-M8
ST3054XM10
ST3054XM12
ST3149-8
916-0013
001-0016/2
001-0016/9
103-0114
119-0014
112-0040
271-0040
110-0040
112-0340
116-0140
285-0240
601-0240
602-0040
ST51-27
110-0761
111-0843
119-0114
111-1231
KK22-1
KK21-0
KO4012M
KO4012M-14
B3676
B3677
W1088
B111-0315KIT
B112-0001K
B271-0140
111-0315
137-0140
285-0040
285-0140
M0037
M0037-104
Categorized Listing
1
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
7
7
7
7
7
7
8
8
8
8
8
8
M0037-119
102-0421
000-5843
112-0963
103-0163
966-5843
116-2033
116-2033P
915-0734
B116-0134
917-0623
111-1861
123-0361
M1160
116-0101
119-0001
116-0663
W7080
116-0043
ST11063
615-0001
615-0003
900-0307
M70TE
M70TE/1
M70TE/1A
M70TE/2
M70TE/2A
M70TE/X
07-Injection System
1318KIT
1318-R
1318K
1318/4
1318/5
1318/6
1318/8
1318/10
000-3323
691STE
ST12975
ST11085
M501
ST10507KK-3
A0201
A0202
A020201
A020202
A020204
A020206
9
9
9
9
9
9
10
10
10
10
10
11
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
13
13
14
14
14
14
14
14
14
15
15
15
15
15
15
16
16
16
16
16
16
17
17
Table of Contents
OBD2-BOB
102-0463
119-0463
140-0133
B110-0101
M0035A
T13-22
09-Diesel
B667-0363
B611-0033PLUS
B611-0033LONG
B900-0199
BCDIINJPLUS
BINJSEATCUT
602-0033
902-0033B
615-0007
ST3000
B606-0053KIT
B606-0053
901-0053
917-0053
ST10627
617-0821
M502
M24D
601-0008
601-0514
601-0521
606-0009
900-8673
916-0021
936-0223
B611-0421
H4550
KO4133
ST440-14
ST51-27
US2568
Categorized Listing
17
17
17
17
18
18
18
18
18
18
19
19
19
19
19
19
20
20
20
20
20
20
21
21
21
21
21
21
22
22
22
22
22
22
23
23
23
23
23
13-V Belt
24
15-Ingition
24
B9042
900-0307
AS4765
AS4955
103-0037
B103-0037
112-0109
66US-16
66US-21
24
24
24
24
24
25
25
25
25
ST3047-12
25
18-Lubrication
26
20-Engine Cooling
28
30
31
33
120-0621
120-0721
103-0209
B1407
B6700
B6700ADJ
642-0009
B117-0207
604-0034
KO4012M-14
111-0034
B9042
103-0040
113-0040
120-0201
113-0001
900-0307
603-0040
B113-0001
ST3049-8
B1027
ST10623/1
ST12506
ST1009DC
H2740
FZ20
FZ19
000-4731
115-0723
C-26
111-0507
915-0107
986-1107
B117-0207
KO4012M
KK70-A
KK17-K
KK20-10
KK21
KK22-1
KK1-250-P
KK22-2
ST51-30
B1924
26
26
26
26
26
26
27
27
27
27
27
28
28
28
28
28
28
29
29
29
29
29
29
30
30
30
30
30
31
31
31
31
31
32
32
32
32
32
32
33
33
33
33
33
Table of Contents
B140-1343
140-1521
168-0121
B9336A
B722-0315
B7200
ST51-30
915-0107
915-0807
986-1107
916-0011
112-0161
126-0314
126-0414
126-0431
126-0621
126-1014
129-0623
140-0014
201-0114
208-0021
201-1243
201-0359
201-0214
201-0721
KK70-A
KK17-K
KK20-10
KK1-250-P
KK21
KK22-1
KK22-2
32-Suspension
924-0231
1117J
1117V
220-0061
900-0007
203-0007
211-0009
211-0763
221-0031
QP1000
KK129-0
ST20-17x19
33-Front Axle
B220/163
116-0462
124-0543
126-0143
Categorized Listing
34
34
34
34
34
34
35
35
35
35
35
35
36
36
36
36
36
36
37
37
37
37
37
37
38
38
38
38
38
38
39
39
39
39
39
39
40
40
40
40
40
40
41
41
41
41
41
41
42
42
220-0061
B129-0343
B140-1143
B202-0143
B210-0043
220-0343
B220-0643
385-0007
KK128-2
KK129-0
42
42
42
42
43
43
43
43
43
43
35-Rear Axle
44
40-Wheels and Tires
47
41-Drive Shaft
48
42-Brakes
49
B234MASTER
B90K
B140-0333
B201-1143
B210-0243
966-0043
124-0543
201-0009
111-0507
385-0007
915-0107
915-0207
B117-0207
KK21
KK22-1
KK22-2
KO4012M-14
ST3004
ST51-30
M0030
M0030A
MBWHEELKIT
341C
124-1763
B2309KIT
T9A-41
T9A-46
T9A-SET
KK20-10
KK1-250-P
000-3523
112-0961
116-0162
H797
KK126-00
KK126-01
44
44
44
44
44
44
45
45
45
45
45
45
46
46
46
46
46
46
47
47
47
47
47
48
48
48
48
48
49
49
49
49
49
50
50
50
Table of Contents
KK126-02
KK126-03
ST12373
ST440-14
46-Steering
B900-0059K
900-0059
900-0059K
210-0007
202-0014
126-0714
ST1445
ST1295
116-0621
201-0621
201-0821
202-0133
KK128-2
KK129-0
KK204-1
Categorized Listing
50
50
50
51
51
51
51
51
51
52
52
52
52
52
52
53
53
53
53
53
47-Fuel Supply
54
55
163-0037
202-0007
203-0107
210-0107
M0035A
202-0190
B900-0059K
110-0059
140-0233
129-0109
140-0133
B1630
140-1221
140-1321
ST1520
B1594
B1630
B900-0059K
B9059M
900-0059K
963-0105
V8695
611250
129-0005
126-0007
B57BG-E
B57BG-M
54
54
54
54
54
54
55
55
55
55
55
55
56
56
56
56
56
56
57
57
57
57
57
57
58
58
58
58
KK43-2
ST1520
58
58
59
B-Body - General
60
D-Diagnostics
61
K-Kablex
63
203-0010
ST440-14
ST440-17
ST440-19
ST440-22
ST440-24
140-0233
B2014
B277-477
AS4750
28DBC
H2715-20H5
T9A-SET
SDS-COMPACT4
DS2020
DS2021
OBD2-500
OBD2-309
DBL800
B70A
OBD2-BOB
38PINBOB
B140-1463A
B1630
BT7205J
102-0463
CODEBRAKER
ST1520
ST1501/1511
ST1504/1514
ST1553
ST1584
ST1585
ST1586
ST1587
ST1588
ST1591
59
59
59
59
59
59
60
60
60
60
60
60
61
61
61
61
61
62
62
62
62
62
62
63
63
63
63
63
64
64
64
64
64
64
65
65
65
Table of Contents
0
1
Alphabetized Listing
000-3323
000-3523
000-4731
000-5843
001-0016/2
001-0016/9
01-General Engine
07-Injection System
09-Diesel
15
49
30
9
3
3
1-3
4-7
7-13
14-18
18-23
102-0421
102-0463
103-0037
103-0040
103-0114
103-0163
103-0209
110-0040
110-0059
110-0761
111-0034
111-0315
111-0507
111-0843
111-1231
111-1861
1117J
1117V
112-0040
112-0109
112-0161
112-0340
112-0961
112-0963
113-0001
113-0040
115-0723
116-0043
116-0101
116-0140
116-0162
116-0462
116-0621
116-0663
116-2033
116-2033P
117-0223
119-0001
119-0014
119-0114
119-0463
120-0201
120-0621
120-0721
123-0361
124-0543
124-1763
126-0007
9
17, 63
24
28
3
9
26
4
55
5
27
8
31, 45
5
6
11
39
39
4
25
35
4
49
9
28
28
31
12
11
4
49
41
52
11
10
10
1
11
3
5
17
28
26
26
11
42, 45
48
58
2
126-0143
126-0314
126-0414
126-0431
126-0621
126-0714
126-1014
129-0005
129-0109
129-0623
1318/10
1318/4
1318/5
1318/6
1318/8
1318K
1318KIT
1318-R
137-0140
13-V Belt
140-0014
140-0133
140-0233
140-1221
140-1321
140-1521
15-Ingition
163-0037
168-0121
18-Lubrication
42
36
36
36
36
52
36
58
55
36
15
14
14
14
15
14
14
14
8
24
37
17, 55
55, 60
56
56
34
24-25
54
34
26-27
201-0009
201-0114
201-0214
201-0359
201-0621
201-0721
201-0821
201-1243
202-0007
202-0014
202-0133
202-0190
203-0007
203-0010
203-0107
208-0021
20-Engine Cooling
210-0007
210-0107
211-0009
211-0763
220-0061
220-0343
221-0031
271-0040
285-0040
285-0140
45
37
37
37
52
38
53
37
54
52
53
54
40
59
54
37
28-30
51
54
40
40
40, 42
43
40
30-31
31-33
4
33-39
8
8
Table of Contents
2
3
4
5
6
8
9
285-0240
28DBC
4
60
32-Suspension
33-Front Axle
341C
35-Rear Axle
385-0007
38PINBOB
39-41
41-43
47
44-47
43, 45
62
40-Wheels and Tires
41-Drive Shaft
42-Brakes
46-Steering
47-Fuel Supply
47-48
48-49
49-51
51-53
54
55-56
601-0008
601-0240
601-0514
601-0521
602-0033
602-0040
603-0040
604-0034
606-0009
611250
615-0001
615-0003
615-0007
617-0821
642-0009
66US-16
66US-21
691STE
900-0007
900-0059
900-0059K
900-0307
900-8673
901-0053
902-0033B
915-0107
915-0207
915-0734
915-0807
916-0011
916-0013
916-0021
917-0053
917-0623
924-0231
936-0223
963-0105
21
5
21
22
19
5
29
27
22
57
12
12
20
21
27
25
25
15
56-58
59
40
51
51, 57
12, 24, 28
22
20
19
31, 35, 45
45
10
35
35
3
22
20
10
39
22
57
A
B
966-0043
966-5843
986-1107
44
9
31, 35
A0201
A0202
A020201
A020202
A020204
A020206
AS4750
AS4765
AS4955
16
16
16
16
17
17
60
24
24
B1027
B103-0037
B110-0101
B111-0315KIT
B112-0001K
B113-0001
B116-0134
B117-0207
B129-0343
B140-0333
B140-1143
B140-1343
B140-1463A
B1407
B1594
B1630
B1924
B201-1143
B2014
B202-0143
B210-0043
B210-0243
B220/163
B220-0643
B2309KIT
B234MASTER
B271-0140
B277-477
B3676
B3677
B57BG-E
B57BG-M
B606-0053
B606-0053KIT
B611-0033LONG
B611-0033PLUS
B611-0421
B667-0363
B6700
B6700ADJ
B70A
B7200
B722-0315
B900-0059K
B900-0199
B9042
B9059M
29
25
18
7
7
29
10
27, 32, 46
42
44
42
34
62
26
56
55-56, 63
33
44
60
42
43
44
41
43
48
44
7
60
6
7
58
58
20
20
19
18
22
18
26
26
62
34
34
51, 55, 57
19
24, 28
57
Table of Contents
B
C
D
F
H
K
B90K
B9336A
B-Body - General
BCDIINJPLUS
BINJSEATCUT
BT7205J
C-26
CODEBRAKER
DBL800
D-Diagnostics
DS2020
DS2021
44
34
60-61
19
19
63
31
63
30
30
H2715-20H5
H2740
H4550
H797
H992LG-T55
60
30
23
50
1
KK1-250-P
KK126-00
KK126-01
KK126-02
KK126-03
KK128-2
KK129-0
KK17-K
KK20-10
KK204-1
KK21
KK21-0
KK22-1
KK22-2
KK43-2
KK70-A
K-Kablex
KO4012M
KO4012M-14
KO4133
33, 38, 49
50
50
50
50
43, 53
41, 43, 53
32, 38
32, 38, 49
53
32, 38, 46
6
6, 33, 39, 46
33, 39, 46
58
32, 38
63-65
6, 32
6, 27, 46
23
M0030
M0030A
M0035A
M0037
M0037-104
M0037-119
M1160
M24D
M501
M502
M70TE
M70TE/1
M70TE/1A
M70TE/2
Q
S
62
61-63
61
61
FZ19
FZ20
M
O
47
47
18, 54
8
8
9
11
21
16
21
13
13
13
13
T
M70TE/2A
M70TE/X
MBWHEELKIT
OBD2-309
OBD2-500
OBD2-BOB
QP1000
SDS-COMPACT4
ST1009DC
ST10507KK-3
ST1054-10
ST1054-5
ST1054TXT55
ST10623/1
ST10627
ST11063
ST11085
ST12373
ST12506
ST1295
ST12975
ST1445
ST1501/1511
ST1504/1514
ST1520
ST1553
ST1584
ST1585
ST1586
ST1587
ST1588
ST1591
ST20-17x19
ST3000
ST3004
ST3047-12
ST3049-8
ST3054/8L
ST3054XM10
ST3054XM12
ST3054X-M8
ST3149-8
ST440-14
ST440-17
ST440-19
ST440-22
ST440-24
ST51-27
ST51-30
T13-22
T9A-41
T9A-46
T9A-SET
TS1015
TS10155
13
13
47
62
61
17, 62
41
61
30
16
1
1
2
29
21
12
15
50
29
52
15
52
64
64
56, 58, 63
64
64
64
64
65
65
65
41
20
2, 46
25
29
2
2
2
2
3
23, 51, 59
59
59
59
59
5, 23
33, 35, 47
18
48
48
48, 61
1
1
Table of Contents
U
V
US2568
23
V8695
57
W1088
W7080
7
12
W

Baum Tools Unlimited 2012 Mercedes Benz Special Tool Catalog

Transcription

Similar documents

Mercedes Benz

Where you come to know.

How to link up to Mercedes connect me.

Euro Auto Festival - Carolinas - Mercedes

Master Money Mentor - UF/IFAS Sarasota County Extension

2005 Haulmark This Motorhome is amazing as the pictures will

Johnny Tremain by Esther Forbes Objectives

- Memphis - Mercedes