August 2014/Fastener Technology International 97

Transcription

August 2014/Fastener Technology International
97
Asahi Sunac Corporation
5050 Asahimae-cho
Owariasahi, Aichi, Japan 488-8688
Tel: +81 561 53 1261
Fax: +81 561 53 5512
Web Site: www.sunac.co.jp
E-Mail: sunac_f@sunac.co.jp
MANAGEMENT PHILOSOPHY:
To serve International Society as a
technology creation company.
• Creating user-beneficial added value
through manufacturing.
• Establishing an organization full of
mutual trust by respecting individual
vitality and intrinsic technology.
• Always growing and advancing with
our employees.
Serving the needs of customers through
original technological development—
that is the spirit we have kept since the
company’s founding, and that is what we
are proud of. From the very beginning,
over half a century ago, this company
has sought wider and deeper dialog
with our customers in the pursuit of new
technological possibilities.
We welcome the challenge to create
original technology in response to recent
worldwide trends for diversification
and globalization. As we create wealth
through our technical innovations we
will continue to contribute to the future
of humankind and our world through
our environmentally friendly production
systems and work environment where
all involved can share in the pleasure
of creation.
COMPANY PROFILE:
Forward thinking and constant new idea
applications have established Asahi
Sunac as the world leader in cold forming machinery. World’s fastest, most
versatile quick tool change in minutes,
high production output, consistency and
easy operation together with many other
firsts have firmly proven this leadership title year after year. Asahi Sunac’s
Forging Technology Center (FTC) is
the world’s most advanced center for
research, testing, education and development of advanced forging methods.
It supports development of optimized
tooling designs and techniques which
allow Asahi Sunac customers to produce
products requiring advanced levels of
precision.
98
Fastener Technology International/August 2014
PRODUCT LINES:
Asahi Sunac high speed cold formers
are high performance machines available in 1, 2, 3, 4, 5, 6 or 7 dies; cutoff
diameters 3 mm thru 36 mm; kickout
lengths up to 350 mm; speeds to 1000
ppm and forging tonnage to 550 tons.
Over 100 different models are available
to choose from.
SB Series – 1 Die / 1 Blow
Cutoff diameters from 2.2 thru 14 mm
and speeds up to 1000 ppm. Six models
are available.
ST & AT Series - 2 Die / 2 Blow
New generation of 2 Die 2 Blow. World’s
fastest machine. Cutoff diameters from
5 thru 26 mm. 20 models available.
Offered with a variety of value added
options including our newly developed
Assist Saver System for producing short
products (ST Series).
RH Series - 2 Die / 3 Blow
Positive or Fingerless Transfer
System
Cutoff diameters of 8.5, 11 and 15 mm.
Three models are available.
SQ & AQ Series
3 Die / 3 Blow
4 Die / 4 Blow
39 different models allow producing a
wide range of parts with many new and
innovative features. Cutoff diameters
from 7 thru 25 mm and with kickout
lengths up to 300mm. SQ & AQ Series
machines produce short to long products
effortlessly at very high speeds.
AF Series Parts Formers
26 models are available. Rugged, highspeed 5 and 6 die machines for precision
cold forming. Available in 12 thru 35 mm
cutoff diameter capacities.
SF Series Parts Formers
20 models. 6 and 7 die machines having
cutoff capacities from 9 thru 37 mm.
New features for ultra- precise forming
include Fine Slide, Fine Cutoff, Fine
Feed and Universal Transfer Systems.
SUBSIDIARIES:
AO Co.
5050 Asahimae-cho
Owariasahi,Aichi,Japan
Tel:0561-53-1216
Fax:0561-53-6999
Asahi America Corp.
17531 Ashland Ave.
Homewood,IL. 60430
Tel: 708-957-4677
Fax :708-798-6760
AO Machinery GmbH
Heltorfer Str.16
40472 Dusseldorf,Germany
Tel: 0211-479-2325
Fax:0211-479-1428
KEY PERSONNEL:
Masahiko Amari, President
Hideyuki Hashimoto, General Manager-Forging Division
Nobuyasu Nishimatsu, President-
Asahi America Corp.
SALES AGENTS:
North America
Fastener Equipment Corporation
17531 Ashland Ave.
Homewood, IL. 60430
John P. Ewing, VP Sales & Mktg
Telephone : +1 708-957-5100
Fax : +1 708-798-6760
www.fastenerequipmentcorp.com
Europe
Seika Sangyo GmbH
Heltorfer Str.16
40472 Dusseldorf,Germany
Karlheinz Kuehl, Director
Telephone : +49 0211-41580
Fax : + 49 0211-4791428
www.seika-germany.com
Attica Automation Inc.
44500 North Lapeer Rd, Columbiaville, MI 48421
Phone: +1 810 793 5400
Fax: +1 810 793 5401
Website: www.atticaautomation.com
Email: sales@atticaautomation.com
COMPANY PROFILE:
Attica Automation is a leading designer and manufacturer of vision
inspection and automation equipment
for multiple industries. Each machine
is designed and tested for specific
applications at the request of each
client. We pride ourselves in solving
the toughest inspection and sorting
problems that the average inspection
systems cannot handle. Our patented, unique approach to material
handling and custom optics allows
Attica Automation to surpass the
competition in not only speed and
accuracy, but also in the versatility
that is highly demanded in today’s
business environment. We do not
believe in a “one solution fits all”
approach to the inspection industry.
Our systems are engineered to
utilize the latest technology in
machine vision, laser and eddy current along with the right material
handling methods to provide the best
possible solution for your inspection and sorting needs. With several
styles of systems available, Attica
Automation is capable of being your
“one stop” provider for inspection,
sorting and automation equipment.
capable of 24 ton at 100 PPM with
a faster PPM count based on the
tonnage.
AV SERIES – AV stands for Attica
Vision. This cutting edge technology
uses high end computers and Patented
Lens Technology systems to inspect
any aspect of any product.
AV-B100 is a highly efficient vision
inspection machine that primarily
focuses on fasteners (screws, nuts,
bolts, and washers), but has been
designed to be customized to inspect
any product. This patented system is
Attica Automation’s most popular
design, and it is being used all over
the world in multiple industries.
INSPECTION SYSTEMS:
AM SERIES – This series of inspection systems incorporates inspection
without using our Attica Vision™
technology. These systems primarily
perform inspection with technologies
like Eddy Current and Laser Sensors.
These systems are also implemented
to manually create/inspect parts
based on the design needs. Each one
of these systems is built for custom
material depending on the specific
needs of the product.
AM-NL is an example of one of the
many AM series machines. It creates
nuts with a top locking feature, double
sided locking feature, and triple sided
locking features. This machine is
AV-D100 – This machine was built
off the AV-B100 platform as it also
uses the Attica Vision™ technology
for inspection. The largest difference
in the AV-D100 is a dial driven system
to handle the inspected parts. This
advantage allows you to inspect any
type of material whether ferrous and
non-ferrous (plastic, foam, metal,
glass, etc,). This machine can be used
to almost any material imaginable.
AV-D1000 – This model incorporates
Assembly in the inspection process
while continuing to use the rotary dial
parts handling method. It includes
many subsystems including a paint
dobber, spring pull test, pull length
test, and head station. This is one
great example of the versatility of
the AV series inspection equipment.
AV-R100 – This series of inspection
systems incorporates robots in the inspection process. With the increased
performance from robots, we are
able to tailor a system to virtually run
product and any part with this system.
PACKAGING & HANDLING:
Attica Automation also provides a
full Line of packaging conveyors,
palletizers, and bulk feeding systems
to add as an option to your machinery.
Whether you are looking for a simple
conveyor or a turn-key packaging
system, we have the product lines
available to meet your needs.
“Under Promise Over Deliver”
99
Q. What changes do you foresee in the engineered fastener industry?
A. Cliff Bernard - Any distributor in business has to face the
daily challenge of warehouse and inventory management.
This has always been the challenge to operating a successful
distribution business. Too much inventory ties up critical
operating capital and too little results in losing a customer
to the competition. As we move into the next few years,
our industry is going to become more and more transparent
and competition will become
more intense. Distributors will
need to leverage inventories
that are not located in their
proprietary warehouses. They
will need to leverage partner
warehouse inventories and or
virtual inventories to reduce
costs and remain competitive
in the preservation of their
customer base.
I believe that Bay Supply
Net will be a vital partner
to distributors by providing
more products and services to
help them serve their customers while freeing capital for
strategic growth initiatives. If
their customer calls for an item
they don’t stock and it’s readily
available in our warehouse to
ship, there is no reason that that
distributor should lose that sale to a competitor.
Q. What is Bay Supply Net and what makes it unique?
A. Bernard - Bay Supply Net is the world’s largest online
engineered fastening warehouse, offering real-time inventory
and blind shipping services for wholesale industrial distributors worldwide.
Michael Eichinger - And it’s unique because we have established a global network of engineered fastener product manufacturers including top brand names that are of the highest
industry demand. These manufacturers feed our warehouse to
100
serve the wholesale distribution marketplace with real-time
inventory and blind drop shipping services. Bay Supply Net
is the first electronic warehousing marketplace to serve the
wholesale distributors with complete order management processing and tracking for their customer service staff. On top
of that, there is the added benefit of same day free domestic
shipping on orders received by 3:00PM EST and instant
international shipping upon checkout
The Bay Supply Net portal also provides “Distributor Friendly” tools to help manage,
track and process orders. For
example, the system maintains
a ship-to-address book and a
customer re-order list so distributors can quickly process
repeat orders.
In addition, the system accepts
future delivery dates and back
order items with expediting
dates and communications.
Tracking numbers, order information, order history and
accounting are instantly available for multiple users at each
distributor’s operation.
Q. Have centralized supply
chains changed the industry?
A. Bernard - Centralized supply chains have yet to change
the industrial supply industry.
It is inevitable that the Internet will play a vital role in this
transformation. It is also clear that manufacturers will need to
welcome technology and the new business models that emerge
from this new transformation of their industry. Distributors
will need to re-invent the way they conduct business. The
opportunity exists for distributors to capitalize on centralized
supply chains like Bay Supply Net by exponentially increasing
their product offerings and enhancing their services to their
customers with no capital investment of any kind. What better
way is there to hedge the market position of your business
for the future?
Q. What makes this the right time to unveil Bay Supply Net?
A. Eichinger - At a time when new technologies within this
electronic age have reengineered nearly every industry and
the way business is transacted, the industrial supply chain
distribution processes of today is inefficient, costly, and time
consuming. Manufacturers continue to reduce inventories
while projecting the financial burden onto their distributors.
Customers want speed and efficiency in product procurement
and distributors must meet these challenges in an increasingly
competitive marketplace.
Distributors need speed and efficiency to better serve their
customers. Most importantly, distributors need greater access
to inventory and pricing to serve the immediate needs of their
customer or someone else will.
Bay Supply Net eliminates the capital requirement for
distributors to increase their inventories. A distributor can
place their staff in control of millions of dollars in real-time
inventory; gain instant access to top brands their customers
want; eliminate the need for fax and email quote requests; and
access instant and competitive pricing along with free blind
drop shipping and discount international shipping services.
This service transforms their business overnight by establishing a powerful online tool for their staff to better serve their
customers and increase their sales and bottom line. Did I
mention the service is free?
Q. Is there a region or marketplace that Bay hopes to reach
that it might not have been able to reach before?
A. Bernard - International shipping has been one of the greatest challenges for our industry. We are excited to introduce
a cost effective international shipping program that provides
instant pricing and processing upon checkout with identical
ease of a domestic ship-to address. We believe this will help
our distributors to rapidly increase their global sales and introduce some highly desirable brands to many untapped markets.
Q. What has been the greatest challenge with the introduction of Bay Supply Net?
offerings, and to gather the necessary product specifications
to effectively bring those products to the distribution marketplace online.
Q. What is the importance of blind shipping?
A. Bernard - Bay Supply Net is a “Supply Net” for distributors
to better serve their customers. We must remain as an invisible
partner to our distributors. We serve them as an invaluable
resource for product procurement and as a logistics service.
This is done by blind drop shipping every order.
Our service can only be valuable to a distributor if it improves
his or her customer’s perception of his or her service and
business. We only exist to make other businesses look better
and operate more efficiently. This can only happen if we are
invisible in the process to the end user. This is why blind drop
shipping is critical to our success.
Q. What does it cost a distributor to
be a part of Bay Supply Net?
A. Bernard - Our service is free. Distributors receive a complete service, technical support staff, a warehouse full of top
brand inventories, free shipping services to domestic customers, and quantity discount wholesale pricing free of charge.
Q. How quickly can a distributor see results from joining?
A. Bernard - The results are instant! Once a distributor signs
into his or her account, they have instant access to inventory,
pricing and order management. They can begin processing
orders in minutes.
Q. How can distributors sign up for an account?
A. Eichinger - All that a distributor needs to do is to call
1-800-718-8818, email info@baysupplynet.com, or visit
our website at www.baysupplynet.com to complete an online application. Once approved, each distributor receives a
login and password for their account with immediate access
to inventory. It’s that simple.
A. Eichinger - I think the greatest challenge we face is the
ability to electronically introduce new products and inventory
to our wholesale distributors online as fast as they are being
delivered and introduced to our warehouse. We currently have
hundreds of engineered fastening product manufacturers and
other industrial supply manufacturers submitting products and
inventories to integrate and offer to our distributors. While
we are thrilled to have such a reception by our industry, it
is a challenge to carefully investigate each manufacturer,
select the appropriate products to integrate in our inventory
101
Beneke Wire Company
5540 National Turnpike
Louisville, KY 40214 USA
Toll-Free: +1 877 423 6353 • Tel: +1 502 367 6434
Fax: +1 502 363 1837
Web Site: www.benekewire.com
E-Mail: bwc@benekewire.com
MISSION STATMENT:
TODAY AND THE FUTURE:
David Beneke succeeded his father as president of the company
in 1983. With 46 years of service,
David recently retired and named
Ken Downs president. Ken has
a degree in metallurgical engineering from the University of
Kentucky and over thirty years
of experience with Beneke Wire
Company.
Teamwork is the key ingredient in
the “Beneke attitude,” everyone
working for a common goal, the
success of the customer, plus a
shared pride in the quality of the
end product.
COMPANY HISTORY:
Over forty-six years ago, Chuck
Beneke had a vision. He believed
there was a strong demand for
high-quality, custom produced
aluminum wire. He was certain
customers would respond to the
idea of aluminum wire manufactured to fit their specific requirements. He was right. In 1968 this
wire pioneer joined with his son,
J.David Beneke and founded
Beneke Wire Company.
Beneke Wire Company started
producing small orders of extremely high-quality aluminum
wire. Great attention was paid to
the alloy, the finish and the rigid
tolerances. More importantly,
the company worked to produce
wire that would improve their
customers’ production process.
By creating the right treatment
or finish, Beneke Wire customers
could possibly eliminate certain
steps in their manufacturing,
thus making a better end product at reduced production costs.
This “partnership” between the
Beneke engineering staff and
the customer is a key ingredient to the success of the entire
operation.
102
Michael and Steve Beneke have
been named co-chairmen of the
board of directors, assuring continuity within the company for
years to come. They also continue
in their current management capacity. The same core values established by Chuck Beneke over
46 years ago have been passed
on to this successful team of
company management.
Beneke Wire Company continues
to grow. With more than 200,000
square feet of manufacturing
space, Beneke provides aluminum wire to a worldwide market.
PRODUCTS:
Beneke Wire Company offers the
most complete range of aluminum
wire products on the market to an
international customer base. All
major aluminum alloys, both heat
treatable and non-heat treatable,
in a variety of tempers and drawn
to exacting tolerances are available. When you order wire from
Beneke, you get more than a coil
of wire. You receive the highest
level of experience and pride in
every package.
SERVICES OFFERED:
With growth such as experienced
at Beneke, come new challenges
and a search for new knowledge.
This search is the function of the
technical department at Beneke.
Customers receive metallurgical
and engineering services unsurpassed anywhere in the industry, including product analysis,
inspection and testing of raw
materials and trial orders. Also
available is Beneke’s participation
in the PPAP program as required
by the customer. All of this support is designed to ensure that the
end product performs as intended.
QUALITY:
The “Beneke attitude”, the company’s partnership approach,
along with its vision and the effort of it’s employees has helped
make Beneke Wire a qualified IOS
9001-2000 company.
SALES OFFICE:
Beneke Wire Company
5540 National Turnpike
Louisville, KY 40214
USA
Tel: +1-877-423-6353 in USA
or +1-502-367-6434 outside USA
Fax: +1-502-363-1837
Internet: www.benekewire.com
E-mail: bwc@benekewire.com
BIING FENG ENTERPRISE CO., LTD.
16, Lane 23, Chung Chen Rd., A-Lien District, Kaohsiung, Taiwan
Tel: 886-7-6318808 ( Rep. ) Fax: 886-7-6318807
Emails: bf@bestformer.com; biing.feng2@msa.hinet.net
Website: www.bf-bestformer.com
Attn: Lance Wei / Tony Hong
MISSION STATMENT:
Biing Feng = BF = Best Former = Best Friend
COMPANY HISTORY:
Biing Feng ( B.F. ) has been one
of the leading manufacturers of
Nuts/Parts Formers in Taiwan
since 1976.
Mr. Shao Yin Wei, President of
Biing Feng was graduated from
San Shing Co. a long time ago
and established his own company—Shin Rong Shin (Predecessor of Biing Feng) since
1976. He insists on the policy of
“professional design, innovative
research and better quality” to
produce the high precision and
stable quality Nut/Parts Formers for the customers. He always
believes the principle: “Quality
is everything, Customer is everything” to serve the customers in
the world.
He is proud of his teams of
Research and Development and
After-Sales Service.
PRODUCTS:
Biing Feng is one of the leading manufacturers of Nuts/Parts
Formers in Taiwan. The company’s core activities are continuing development and contribution for the world fastener
industry. Biing Feng Formers
not only produce the standard
nuts such as Hex Nuts, Flange
Nuts, Weld Nuts, but also produce special products for the
automotive industry such as Set
Screws, Sleeves, Nipples, Wheel
Nuts, Castle Nuts and customerized- parts, etc.
The models of Biing Feng Formers are from 11B to 50B; and
Biing Feng has already shipped
over 4500 sets of Formers to users all over the world and Biing
Feng is looking forward to over
50% of fastener industry oerating its solid and steady formers
within the coming 10 years.
QUALITY:
The Biing Feng company quality policy is: “Never Compromise Quality”
APPROVALS:
Biing Feng is approved by many
famous fastener manufacturers in
the world.
Biing Feng Enterprise Co., Ltd.
always maintains the attitude:
“Not Best, But Better” to satisfy
its customers’ requirements.
SALES OFFICE:
Biing Feng Enterprise Co., Ltd.
16, Lane 23, Chung Chen Rd.
A-Lien District
Kaohsiung, Taiwan
Tel: 886-7-6318808 ( Rep. )
Fax: 886-7-6318807
Emails: bf@bestformer.com; biing.feng2@msa.hinet.net
Website: www.bf-bestformer.com
Currently, over 50% of Biing
Feng customers have the Parts
Formers (6 stations/7 stations
long stroke with PKO System)
to produce the special parts for
the automotive and aerospace
industries.
103
The Bradley Group Of Companies
410 S. 38th Ave. St. Charles, IL 60174 USA
Tel: +1 800 201 7381 • Fax: +1 630 443 8421
Web Site: www.bradleygroupcoatings.com
E-Mail: srogalla@bradleygroupcoatings.com
TIGHT CONNECTIONS MAKE
QUALITY ASSEMBLIES
When a screw loosens, a joint leaks
or a component falls off—injury can
occur and a product’s good name is
instantly tarnished.
The Bradley Group Of Companies’
challenge is to prevent fastener failures
by the addition of name brand pre-applied chemical adhesives, sealants and
mechanical locking products.
Like its customers, The Bradley
Group Of Companies stakes its reputation on consistent, verifiable quality.
SINCE 1984
Since 1984, The Bradley Group Of
Companies has been enhancing the
performance of ordinary fasteners by
pre-applying specialized adhesives
and sealants.
But Bradley doesn’t just lock and
seal with pre-applied adhesives and
sealants. Bradley’s application experts
make sure that the right adhesive, sealant or mechanical locking material for
the performance required is applied the
right way, every time.
A PRODUCT TO MEET EVERY NEED
applies the finest pre-applied products
from LOCTITE® and 3M as well as
Bradley’s own BRADLEY EPOXY and
new WHITE NYLON PATCH®.
Technical sheets are available from
the website for each of the products
offered at www.bradleygroupcoatings.
com or from the customer service
department.
Though pre-application of adhesive
and sealants to NUTS challenges the
competition, the Bradley Group has
developed a wide range of application equipment to internally apply any
Bradley offered products at competitive
prices.
Bradley also sells BULK ADHESIVE AND SEALANT kits for inhouse applications. Bradley’s experts
assist customers in determining the
correct pre-applied product for their
application.
ON-TIME DELIVERY
Their new high-speed equipment
pre-applies Loctite, 3M, Bradley Epoxy
and White Nylon to rigorous quality standards. High volume orders are
turned around in record time.
Bradley’s small lot cell was designed
for the small users of pre-applied thread
lockers and sealants. Small production
runs, prototypes and small lot specials
are assured of the same quality and
delivery standards as larger orders.
With four regional service centers
in St. Charles, Illinois; Gardena, California; Statesville, North Carolina; and
Lakeville, Minnesota, Bradley is capable of providing immediate delivery
at reduced freight costs.
PROTOTYPE QUANTITIES
The Bradley Group Of Companies’
numerous production lines allow them
to run small quantities, prototype quantities as well as continuous, high production quantities.
SYSTEMS THAT ASSURE QUALITY
is ISO 9001:2000 and committed to
quality. Bradley tests to customers’ or
industry standards. Certificates of compliance and performance test results are
provided.
Bar code scanning throughout the
production cycle ensures error-free
entry of orders and provides real time
order tracking.
Bradley offers a modern integrated
computer system that acknowledges the
customer order, schedules the order and
notifies the customer when the coating
process has started.
SERVING DIVERSE MARKETS
The list of industries Bradley services
keeps growing: Automotive, recreation-
104 Fastener Technology International/August 2014 Small lot cell available from The
Bradley Group Of Companies.
al vehicle, electronics, computer, power
tool, heavy equipment, appliance, marine, hydraulic, pneumatic and more.
Bradley has designed special processing equipment to apply pre-applied
adhesive to fasteners as short as 3 millimeters in length. So, thanks to The Bradley Group Of Companies, loosening is
no longer of concern for manufacturers
of laptop computers, cell phones and
eyeglasses. They rely on Bradley’s preapplication of adhesives to secure their
critical fasteners.
RECEIPT, DELIVERY AND PAYMENT
accept parts in any type of container. To
reduce shipping or storage damage, custom or standard packaging is available.
Bar code labels are available. Bradley
ships via all commercial methods or
via clients’ carriers. All major credit
cards are accepted for coating services
as well as bulk purchases of adhesives
and sealants.
Your Single Source For Thread Locking And Sealing Applications
For Sales And Technical
Assistance Call:
1-800-201-7381
www.bradleygroupcoatings.com
BUCKEYE FASTENERS COMPANY
5250 West 164th St.
Cleveland, OH 44142 USA
Toll Free: +1 800 437 1689
Tel: +1 216 267 2240
Fax: +1 216 267 3228
Web Site: www.buckeyefasteners.com
E-Mail: info@buckeyefasteners.com
COMPANY HISTORY:
Buckeye Fasteners main distri-
ance levelers and furniture glides.
Buckeye Fasteners Company, a
bution center is located in Cleve-
We have complete custom manu-
division of Fastener Industries,
land, with outlying warehouses
facturing capabilities and support
Inc., has been supplying qual-
strategically placed throughout
our products from development
ity fasteners for over 40 years.
the country to better serve our
to implementation.
An employee-owned company,
customers. These warehouses
provide outstanding customer
located in Cleveland, Ohio,
are located in Atlanta, GA and
service and on time delivery. Our
we have been a direct Factory
Elk Grove Village, IL. We also
reputation throughout the fas-
source of weld fasteners manu-
have a division in Canada. The
tener industry has us constantly
factured by The Ohio Nut and
Ohio Nut & Bolt of Canada Ltd.
ranked among the top distributors
Bolt Co. throughout those same
located in Mississauga, Ontario
in the country.
40 years. The Ohio Nut & Bolt
which serves Canadian custom-
Co. has been part of the Berea
ers with our full array of fastener
landscape since 1905, starting
offerings.
as a bicycle chain manufacturer,
We also
QUALITY:
Fastener Industries has been a
100% employee-owned (ESOP)
then moving into the manufac-
company since 1980 and is ISO
ture of weld screws in 1926. One
9001 Quality Assured.
of their first major weld fastener
customers was the Ford Motor
Company who used Ohio weld
FOR MORE INFORMATION:
screws on the frame of the Model
Our complete catalog, along with
A to provide easier assembly
of the fenders. The Berea plant
PRODUCTS:
CAD downloads of all products
and access to pricing is available
along with its’ Modern Fastener
Buckeye Fasteners takes pride in
operation in Cleveland produces
stocking an impressive inventory
fasteners known throughout the
of fasteners from at least eight
manufacturing world as “OHIO”
leading fastener manufacturers.
weld fasteners which are all
In addition to weld fasteners, we
team by sending an email to:
made in the USA. Ohio Weld
also distribute adjusting screws,
info@buckeyefasteners.com
Fasteners have long been con-
nuts, press nuts, stand-offs, cap,
sidered the “Primary Fasteners
acorn, thumb nuts, rivet nuts,
Or by calling toll free:
in Fastener Assemblies”
grease fittings, clevis pins, appli-
by visiting the website below:
www.buckeyefasteners.com
You can also contact our sales
800-437-1689
105
BW WALDEN GROUP INC. – HEAD OFFICE
329 Rayette Rd., Unit#1
Concord (Toronto), Ontario
Canada L4K 2G1
Tel: 905-482-2659 * Fax: 905-482-2663
Email: sales@bwgroupinc.com
Website: www.bwgroupinc.com
COMPANY PROFILE:
Founded in 1981, BW Group has
brought together an exceptional line
of New machinery suppliers from
around the world to provide with the
latest technology, innovations, and
highest quality to service our customers in the fastener industry.
PRODUCT LINES:
Hilgeland – Wafios Umformtechnik:
•High Speed 1Die 1Blow Cold Headers
•High Speed 1Die 2Blow Cold Headers
•High Speed Rotary Die Headers
•High Speed 2Die 3Blow Headers
•High Speed Multi-Die Miniature
Headers & Forming Centers
•High Speed Flat Die Thread Rollers
•High Speed Pointing & Rounding
Machines
Nutap – Wafios Umformtechnik:
•High Speed 2-Spindle Automatic
Nut Tapping Machines, M2-M24
•High Speed 1-Spindle Automatic
Reversing Nut Tapping Machines,
M2-M20
Kieserling – Wafios Umformtechnik:
•High Speed Multi Die Coldformer, 5-6 Dies, M3-M16
•High Speed Ball & Roller Headers, M12-M30
Hyodong:
•Bolt Former, 3-5 Dies, M16-M38
•Bolt Part Former, 5-7 Dies, M16-M50
•Cold Nut Former, 5-6 Dies, M16-M27
•Cold Part Former, 5-6 Dies, M16-M41
•Flat Die Thread Roller, M16-M42
106
Govama:
•2Die Cylindrical Thread Roller, 30-250mm, 30-1200Kn
•3die Cylindrical Thread Roller, 30-400mm, 10-1500Kn
•Specialty Thread Rollers > Spline Rolling, Ball Stud Burnish & Threading, Hot Roll Threading Railroad Bolts
•End Facing Machines, Scaffolding, Drilling & Thread Rolling Machines
RMG-Lewis:
•In-Line Wire Drawing Machines
•Power Driven Pre-Feeder/Payoffs
•Powered & Non-Powered Turntables
•Dual End Fliippers
•Mechanical Descalers
•Wire Straightening & Cutting Machines
Angor:
•Standard & Heavy Duty Steel Belt Conveyors
•Magnetic Conveyors
•Parts Cleaning Systems
•Parts Loaders/Dumpers
Dimac:
•Automatic Inspection, Measuring
& Sorting Machines
Powell:
•Automatic Net Weigh / Count Pack Systems
•Automatic Bagging Machines
•Automatic Parts Feeding Systems
•Bulk & Low Count Packaging Machines
•Corrugated Steel Parts Loading Containers
Mid-West Feeder:
•Vibratory Feeder Bowls
Brankamp:
•Process Monitors – For Cold/Multi Die Headers, Thread Rollers, Stamping & Forging Machines
Videx:
•Planetary Single & Double End Thread Rollers
•Planetary Single & Double End Bent Bolt Machines
Anceschi:
•Thread & Form Rolling Dies
Used Machinery:
•Fastener & Wire Working Machines
KEY PERSONNEL:
Mike Walden: Director
Amir Walden: Sales
Ron Walden: Sales
Rick Dawson: Sales
SALES OFFICES:
BW WALDEN GROUP INC. –
HEAD OFFICE
329 Rayette Rd., Unit#1
Canada L4K 2G1
Tel: 905-482-2659
Fax: 905-482-2663
BW WALDEN GROUP INC. – CHICAGO OFFICE
4641 Shropshire Dr.
Rockford, IL. 61109
Tel: 815-874-0042
Tel: 815-262-8009
Email: ricdawson@comcast.net
Carlo Salvi SpA
Via Ponte Rotto, 67
23852 Garlate (Lecco), Italy
Phone: (+39) 0341 654 611
Fax: (+39) 0341 682 869
E-Mail: carlosalvi@carlosalvi.it
Web Site: www.carlosalvi.it
MISSION STATMENT:
We are committed to manufacturing high
quality, affordable and user friendly cold
and warm heading equipment. Our mission
is to provide state of the art, easy to use machinery for the production of simple as well
as complex parts. We have made a point of
continuing the company founder’s tradition
of providing high productivity, reliable, affordable and long-lasting equipment.
COMPANY HISTORY:
His father was Italian, but he was born in
New York in 1907 and returned to Italy with
his family when he was 8 years old. His father
served in the Italian Army during World War
1. He started his own Company in 1939 with
the purpose of building mechanical descalers
to process hot rolled rod. A few thousands of
these machines have been sold all over the
world. Although these machines were successful, Carlo Salvi’s aim was to manufacture
new and more complex machines. His new
adventure began in the late 40’s with the design and production of a flat die thread roller,
machines that have established immediately
for good quality and affordable price.
Very soon this was followed by a family of
head slotters and finally, in 1952, he built
his first single die two blow toggle header.
The success was immediate. The machine
was reliable, low-priced and high speed.
In the early 70’s a complete new line of
single-die high speed models was designed
for the production of semi-tubular and fully
tubular rivets. These machines literally revolutionized the market. In fact Carlo Salvi
machines allow to produce up to 660 parts
per minute with very low production costs.
In the early 80’s, Carlo Salvi developed
a new machine range of 2-die 4-blow and
progressive headers, up to six stations.
During the 90’s, Carlo Salvi continued
investing in the development of new machines in order to build cold headers with
innovative electronic systems designed to
provide the highest levels of performance
output. Presently, Carlo Salvi is offering
a complete range of cold headers up to 6
stations, capable of handling wire from 0,6
to 24 mm in diameter, and with the ability
to process materials such as stainless steel,
titanium and special alloys in combination
with induction pre-heating.
MANUFACTURING PROGRAM:
1-die 2-blow headers
This kind of headers allows to head up to
six diameters of material and offers the possibility to produce components with quite
complex shapes. Their main features are the
high speed and precision to head screws,
semi tubular rivets even with a shouldered
shank and tubular rivets, granting a remark-
Single die double blow
header model CS 005
able tool life and an easy manintenance.
2-die 4-blow headers
These headers allow to obtain components
with complex shapes which cannot easily
produced on multi station machines, where
it is necessary to transfer the part several
times, because the shank is very short or the
head too big. The components which can
be obtained are screws, shaped semi tubular
rivets and tubular rivets with large head.
Progressive headers
The progressive headers allow to produce
with high precision special parts with very
complex shapes, which are used in various
fields of the market and particularly in the
automotive and in the aerospace industries
With thousands of machines sold all over the
world, Carlo Salvi has become a leading supplier of machines for the fasteners industry.
Our technicians are always developing
innovative solutions in response to the
growing needs of the market.
Every years Carlo Salvi invests on studying
new and innovative application to support
the demands of most exigent customers.
Since 2012 Carlo Salvi is investing in men
and equipment to rebuild machines by its
own but even by customer’s facilities. This
new service is gathering a big success and
interest and, thanks to the same, Carlo Salvi
is now ready to offer completely refurbished
machine, on which have been substituted
all the mechanical parts and the electrical,
pneumatic and hydraulic systems. These
machines can be certified according to the
actual norms and warranted for 1 year
Please contact the Office in Garlate, to
check machines availability.
FACILITIES:
The administrative offices are located in
Milan, since the year of the foundation, 1939.
The headquarters in Garlate cover an area of
about 25,000 square meters.The management,
accounting and commercial offices would
all be found here, as would the development
department, the production area, the assembly
room and the spare parts warehouse.
Besides the headquarters in Garlate, there
are several branches:
CARLO SALVI USA in Toledo, Ohio;
CARLO SALVI GUANGZHOU MACHINERY AND EQUIPMENT based in
Guanzghzou, China;
CARLO SALVI UK LTD based in Telford, UK;
CARLO SALVI ISTANBUL LTD, based
in Istanbul, Turchia.
All Carlo Salvi branches in the world,
thanks to the presence of highly skilled
technicians, can assure an immediate technical support and a wide range of spare parts
always available for immediate delivery. All
this allowed Carlo Salvi to create a good
reputation for customer care.
SALES ORGANIZATION:
CORPORATE OFFICE:
Carlo Salvi S.p.A.
Via Ponte Rotto, 67
23852 Garlate, Lecco, Italy
Phone: +39 0341 654611
Fax: +39 0341 682869
E-Mail: carlosalvi@carlosalvi.it
Web Site: www.carlosalvi.it
Key People
CEO: Dr. Sergio Ziotti
Sales & Marketing Manager: Marco Pizzi
Product Manager: Germano Pandiani
CARLO SALVI S.p.A. BRANCHES:
Carlo Salvi USA, Inc.
4035 King Road Sylvania
OH 43560 Ohio, U.S.A.
Phone: +1 419 843 1751
Fax: +1 419 843 1753
E-Mail: carlosalvi@frontier.com
Key people
Director: Marco Pizzi
Office Manager: Tony Macaro
Carlo Salvi (Guangzhou) Machinery and Equipment Ltd.
1850 Creativity Zone, G/FL. Block 66-6,
N° 200 Fangcun Avenue East,
Liwan District, Guangzhou, China
Phone: +86 20 81734672
Fax: +86 20 81239359
E-mail: gm.china@carlosalvi.com
Key people
Director: Germano Pandiani
General Manager: Massimiliano Bertotti
Carlo Salvi UK Limited
Unit 4, Cedar Court, Halesfield 17
Telford, Shropshire, TF7 4PF, U.K.
Phone: +44 1952 587730
Fax: +44 1952 327180
E-mail:sales.uk@carlosalvi.com
Key People
Sales Manager: Kevin Blenkiron
Carlo Salvi Istanbul Makine Ve Ticaret Limited Sirketi
Cemil Topuzlu Cad. No. 83 Besik Apt. D.3
34728 Caddebostan – Istanbul, Turkey
Phone: +90 216-386 85 00
Fax: +90 216-386 85 08
E-mail: sales.tr@carlosalvi.com
Key people
Sales Manager: Fevzican Abacioglu
107
108
xxx
Fastener
Fastener Technology
Technology International/August
International/August 2014
2014
Darling Bolt Company
Box 2035, 2941 E. 10 Mile Rd.
Warren, MI 48090-2035 USA
Toll-Free: +1 800 882 0747
Tel: +1 586 757 4100
Fax: +1 586 757 1555
Web Site: www.darlingbolt.com
E-Mail: sales@darlingbolt.com
COMPANY HISTORY:
Since 1958 Darling Bolt Company
has been America’s fastener specialist with corporate offices located in
Warren, Michigan. Darling Bolt has
built a reputation on having the large
and special fasteners on the shelf to
service your immediate needs.
Darling Bolt Company’s growth
and leadership in the fastener industry is the result of maintaining a
multi-million dollar inventory of the
highest quality fasteners available.
To service a nationwide market,
we have extended our delivery
capabilities throughout the country
with strategically located warehouse
facilities. Each of these outlets
maintains an extensive fastener
inventory in order to help reduce
increasing shipping costs and expedite deliveries.
SERVICE:
Service at the Darling Bolt Company has always meant dedicating
ourselves to fulfilling our customers’ wide range of requirements.
Service is belief in our products,
in our customers and in ourselves.
Whatever our customers’ requirements are, the need for quality and
dependability is ever present.
Equally important is the fact that
our pricing policy is attractively
competitive. Service is as close as
your phone. Call Darling Bolt Company today for immediate shipment
of orders or inventory information.
Darling will usually stock your requirements in specials or standards,
large or small volume.
And the Darling Bolt Company’s
commitment to quality is not just
limited to hex head cap screws. The
same high standards are applied to
all Darling bolt products.
PRODUCT LINE:
Satisfied customers equate the
Darling name with larger product and
fast deliveries. However, our inventory is equally extensive in the full
range of standards as well as specials
in most product categories.
Complete product catalogs of
special and standard sizes maintained in stock are available at your
nearest distribution center.
To service unusual requirements
of the fastener industry, Darling
Bolt Company has developed an
extended thread length program. We
stock hex cap screws and socket cap
screws with extended thread length
to allow us to cut to a specified
length and still maintain minimum
thread length tolerances. Our “instant” special can satisfy your immediate short term requirements.
For repetitive and/or large volume fastener items, Darling Bolt
Company will manufacture, stock
and release to your requirements.
Darling Bolt Company fastener
products include:
• Hex Head Cap Screws
• 12 Point Flange Screws
• Hex Lock Nuts
• Hex Nuts
• Flat Washers
• Lock Washers
• Socket Head Cap Screws
Additional standard and special
sizes that are stocked at the Darling
Bolt Company include:
• Button head socket caps
• Flat head socket caps
• Socket set screw various
points socket shoulder screws
• Hex nuts
• Hex jam nuts
• Heavy hex nuts
• 2-H nuts
• Threaded rod
• Square head set screws
• Dowel pins
• Pull dowel pins
SALES OFFICES:
Corporate Office:
Darling Bolt Company
Box 2035
2941 E. 10 Mile Road
Warren, MI 48090-2035
Tel: +1 586 757 4100
+1 800 882 0747
Fax: +1 586 757 1555
Web Site: www.darlingbolt.com
E-Mail: sales@darlingbolt.com
Los Angeles Warehouse
11023 Forest Place
Santa Fe Springs, CA 90670
Tony Davis,
Branch Manager
Tel: +1 562 946 1458
Fax: +1 562 946 3268
Houston Warehouse
1915 Turning Basin Dr. #506
Houston, TX 77029
Richard Ordaz,
Branch Manager
Tel: +1 713 673 3971
Fax: +1 713 672 6642
109
ENKOTEC A/S
Sverigesvej 26
8660 Skanderborg, Denmark
Tel: +45 8652 4444
Email: sales@enkotec.dk
Website: www.enkotec.com
COMPANY BACKGROUND:
The company, ENKOTEC A/S, was established back in 1981 for producing and
commercializing the newly developed nail
manufacturing machine. The introduction
of the ENKOTEC rotary nail machine
was a revolution within the nail industry,
as the machine was totally different from
the conventional nail manufacturing
machines known since the turn of the
19th century. The nail machine quickly
became a Danish export success and today
ENKOTEC machines are running in nail
factories located all over the world.
At our headquarter address in Denmark
we undertake the development, production and sale of machines and tooling for
the manufacture of nails. We have regional
sales offices in Cleveland, Ohio, and in
Buenos Aires, and we cooperate with local
commercial agents on selected markets.
KEY PERSONNEL:
ENKOTEC A/S (Head Office)
Bent Just Petersen,
Managing Director, bjp@enkotec.dk
Jesper Bendix,
Area Sales Manager, jb@enkotec.dk
Uffe Bisgaard Pedersen
Area Sales Manager, ubp@enkotec.dk
Hanne Krog-Meyer, After Sales,
Marketing & Support Manager
hkm@enkotec.dk
Enkotec Company, Inc.
(North America)
Jan Sorige, President, jan@enkotec.com
South & Central America
Max Libedinsky,
Regional Sales Manager, max@enkotec.dk
MISSION STATEMENT:
ENKOTEC is a leading global supplier
of machinery for the manufacture of
mass-produced nails as well as customized solutions. We create innovative and
productive solutions for our customers.
PRODUCT LINES:
ENKOTEC nail machines are unique
by being based on a rotary forming
principle, allowing wire feeding, wire
cutting and head forming to take place
in one continuous process of rotating
movements. The ENKOTEC technology
makes it possible to produce high-quality
nails at an unprecedented speed, without
110
compromising production stability, while
requiring less space and fewer operators
and offering the possibility of unmanned
production. At the same time, this machine concept allows to implement an
environment friendly production with
a low noise level, small energy consumption and an oil-free manufacturing
process, eliminating the need for subsequent nail tumbling. Over the years,
ENKOTEC has made continuous design
and material improvements on the nail
machine, thus meeting customer requirements for increased cost-efficiency and
user-friendliness. ENKOTEC’s product
program includes various complementary
machines supplied as standalone units
or in-line systems. ENKOTEC’s in-line
nail manufacturing solutions, featuring
a balanced combination of well-proven
systems and modern technology, prove
our wish to constantly put our customers
ahead of competition.
ENKOTEC’s present high-capacity nail
machines, the ENKOnail+ series, are
designed according to a modular principle with a basic machine and several
machine variants. The machines are
producing up to 2,500 nails per minute,
and it is possible to cover nail lengths
from 28 up to as much as 130 mm (1.1"
to 5 1/8”) and wire diameters from
ø1.8 to ø4.2 mm (.071" to .165"). The
ENKOnail+ machines come with a PLC
control system and touch screen operator
interface, which is easy to navigate and
allows quick setup of nail parameters.
The ENKOnail models, intended for
small and midsize capacity needs, produce up to 1,000 nails per minute at ø2.34.2mm (.090” to .165”) and nail lengths
50-103 mm (2” to 4”). The ENKOnail
machines feature simple adjustments,
quick tooling changeovers, easy access
for cleaning and service, and long tooling
life among other advantages. Combined
with our high-end ENKOnail+ series,
the ENKOnail models allow us to offer a complete range of high-speed nail
machines, where many tooling parts are
common for all machine models, thus
increasing their cost effectiveness.
The ENKOroll thread rolling machine
has been designed for making screw shank
or annular nail profiles with a production
speed of up to 2,500 nails per minute. The
working area of the ENKOroll is ø1.8 4.2 mm (0.071" to 0.165") x 32 - 105 mm
(1¼" to 4") nail length with a profile height
of 27 - 76 mm (1.06" to 3.00"). Apart from
the high speed, the ENKOroll machine
incorporates numerous advantages such
as high-quality output, high stability, quick tooling changeovers, simple
adjustments, and low noise level. The
machine is capable of running in-line in a
nail manufacturing line or as a standalone
machine.
ENKOTEC’s product range also includes
the ENKOpack, which is a movable
stand-alone packaging machine. The
system offers the possibility of in-line nail
production in a complete, automated nail
manufacturing process. The ENKOpack
automatically feeds the nail cartons, fills
them with the accurate number of nails,
and transports the nail cartons via automatic drive belt conveyors. All of this can be
done in-line with a standard ENKOTEC
nail machine or thread rolling machine.
ENKOTEC has exclusive rights to
worldwide sale and service of the wire
coil ENKOllator, type CWC01, with
packaging machine, type PCC01,
both engineered and built by German
BAUSSMANN. Using automatic cutter
and coiling units, the wire coil collator
can produce bright and electro galvanized
wire welded coil nails with smooth shank,
ring shank, screw shank and spiral shank.
COMPANY PHILOSOPHY:
Our company philosophy includes an
extensive service concept based on partnership. Thus, ENKOTEC provides our
customers with an efficient after-sales
system including quick supplies of spare
parts, technical support at all levels and
customized training programs. Through
frequent sales visits and preventive service,
we stay in close contact with our customers,
allowing us to be continually updated on
the nail producers’ requirements and the
development of the market, so that R&D
projects can be adjusted accordingly.
Managing Director, Bent Just Petersen
concludes: “ENKOTEC is determined to
stay focused on the nail industry, as we have
done for more than 30 years. We strive to be
at the cutting edge of technology so that we
can make our customers competitive. More
than ever, we want to be the No. 1 brand
within nail manufacturing.”
111
GÖKÇÜOĞLU MAKİNA A.Ş.
ESTİM Sanayi Bölgesi, Metal İşleri Sanayi Sitesi, 3. Cadde, No: 86
Postal Code: 35470 Izmir-Turkey
Tel: 0090 232 257 6969 (Pbx)
Fax: 0090 232 257 5254
Website: www.gokcuoglu.com
E-mail: info@gokcuoglu.com
CORE BUSINESS:
Simply great and high quality
2 or 3 Die Circular type Thread
Rolling Machine and End Facing
Machine manufacturer in Turkey
since 1975. In details, we create
solutions for our partners, all
around the world, for efficient
production and high quality end
product with competitive price.
Machines are provided by our
side to our partners, complied to
local regulations and customer
specification, as well as integrated automation feeding-ejection
systems to our machines.
preferred to use components, complied to UL, CSA regulations and
brands that used for our machines
can easy to reach in every part of
North America. Special applications
such as thread Rolling in hot form,
combined machines, two sliding
bodies for precise spline Rolling
are also parts of our Expertise area.
MANUFACTURING PROGRAM:
PHILOSOPHY:
We have 4 main principles as
the main part of a long-term
partnership;
• Customer satisfaction
• Quality
• Reliability
• Consistency
You can see these values in all
parts of our machine from the
smallest screw to completed
machine.
COMPANY HISTORY:
GOKCUOGLU Co. INC. had established by Fahrettin - H. İbrahim
- U. Zafer GOKCUOGLU, in
1975, at a 55 m² facility. More
than 1000 machines had been sold
to local market, different countries in Europe, North America,
South America, Middle Eastern
countries and Russia, directly or
through Agencies.
In view of technology and quality
of machine, GOKCUOGLU had
112
GOKCUOGLU proud to declare
that GOVAMA ® machines are
not a result of outsourcing. With
modern machinery production
facilties of GOKCUOGLU has capable to produce %90 of machine
(depends on machine model)
in-house. This the most important part to keep quality level of
Govama® machines.
Addition to this modern machinery
production facilties, system would
be also 2nd step of consistency on
quality, on time delivery and customer satisfaction. We use MRP
program to track machines raw material and semi-material flow. This
will also enable us to supply spare
part of sold machine 20 years ago.
Capability of our machines for 2
die thread Rolling machines are
changing between 3 tonnes to 120
tonnes. These values are for 3 die
thread Rolling machines between
3 tonnes to 150 tonnes. In view of
workpiece diameters, you can roll
between 8 mm to 400 mm.
Product Lines:
• 2 Die Cylindrical Thread Roller,
30-250 mm, 30-1200 Kn
• 3 die Cylindrical Thread Roller,
30-400 mm, 10-1500 Kn
• Specialty Thread Rollers >
Spline Rolling, Ball Stud Burnish
& Threading, Hot Roll Threading
Railroad Bolts, Automation
• End Facing Machines, Scaffolding, Drilling & Thread Rolling
Machines
SERVICE & SUPPORT:
Gokcuoglu with it’s modern machinery production facilties and
system for traceability of spare
parts, to provide the best to end
partners, always establish a capable sales and technical support
network before machine sales. In
North America, BW Group is the
most competent contact partner for
these requirements of end partners.
After machine sales, we offer our
customers training at GOKCUOGLU plant or installation, maintenance, comissioning at customer
plant as well.
CONTACTS:
You can contact the BW Group:
Toronto Head Office
MIKE WALDEN
AMIR WALDEN
RON WALDEN
BW Walden Group
329 Rayette Road Unit #1
Concord, Ontario Canada L4K 2G1
T: (905) 482-2659 • F: (905) 482-2663
KEY CONTACTS AT
GOKCUOGLU HEADQUARTER:
Burak UFAKLI
Foreign Trade Executive
Mobile:0090 505 222 4982
Tel: 0090 232 257 6969
Fax: 0090 232 257 5254
E-mail: burakufakli@gokcuoglu.com
HYODONG MACHINE CO. LTD.
#933-8, Gumuncheon-Ri
Hyangham-Eup, Hwaseong-si
Kyungki-Do
Korea
Tel: +82-70-7119-5914 Fax: +82-31-366-6646
Email: hds@hyodongmachine.co.kr
Website: www.hyodongmachine.co.kr
COMPANY PROFILE:
HYODONG Machine Co. Ltd.
was founded in 1983, and has
been steadily growing and expanding our machinery production facilities over our 30 year
history. We currently operate
large machine production plants
for the production of world class,
leading in quality cold forming
machines.
HYODONG have developed
and advanced technology to
meet customer needs, including the manufacture of custom
ordered machinery, and we offer innovative design features
for our machinery. HYODONG
machine frames are kept in open
air for 2-3 years for natural annealing to remove inside stress
before machining the frames.
HYODONG Formers are available with a long list of standard
& optional features such as,
Linear wire feed, Full robot tooling change system, S.P.S system
(short part support), S.L. System
(soft landing), K.O. length adjust
with computer control, Impact
cutting, CNC touch screen,
Double uncoiler.
PHILOSOPHY & VISION STATEMENT:
Hyodong Machine have developed technology and increased
facilities for 30 years to meet
the needs of our customers.
Therefore we have technology
to manufacture custom ordered
machines for various customers
and the biggest facilities. We try
to find out the needs of the customers more exactly and deeply
by communicating with them, so
their needs become the source
of technology development, and
their complaints are minimized
by our quick customer service.
The competitiveness comes from
the quality of our machines. We
will keep developing our technology to satisfy our customers
and will manufacturers the best
quality machines in the world.
PRODUCT LINES:
Bolt Former, HBF series: Ranging from 8-42 mm Cutoff Dia
up to 480 mm length, with range
of 250-9000 kN Forging Loads.
These machines are available in
3, 4, & 5 dies configuration.
Bolt Part Former, HBP series:
Ranging from 11-50 mm Cutoff
Dia up to 450 mm length, with
range of 600-12,000 kN Forging
loads. These machines are available in 5, 6 & 7 dies configuration.
Cold Part Former, HNP series:
Ranging from 11-50 mm Nut Size
of 600-11,000 kN Forging loads.
These machines are available in 5
& 6 dies configuration.
Cold Nut Former, HNF series:
Ranging from 6-27 mm Cutoff Dia
of 400-6,000 kN Forging loads.
These machines are available in
5 dies configuration.
Flat Die Threader, HR series:
Ranging from 6-42 mm Thread
Dia, up to 200 mm shank lengths.
KEY PERSONNEL:
Kim Dong Sub: President
Jeff Kyung: Sales Manager
SALES AGENTS:
North America:
BW WALDEN GROUP INC.
329 Rayette Road, Unit#1
Canada
Tel: 905-482-2659 Fax: 905-482-2663
BW WALDEN GROUP – CHICAGO
Tel: 815-874-0042 Fax: 815-874-0042
Email: ricdawson@comcast.net
CINCO INDUSTRIES INC.
14N507 Timber Ridge Dr.
Elgin, Illinois 60124 USA
Tel: 847-741-4400 Fax: 847-741-4407
Email: sales@cinco-ind.com
Website: www.cinco-ind.com
113
Since The Creation
The Most Corrosion-Resistant Stainless Steel Self Drilling Screw
John Chen Screw Industry Co. Ltd.
Product Without Surface Coating Withstands
3,500~15,000 Hour Salt Spray Test and 35~70 Kesternich (Acid Rain Test).
Innovative stainless steel material
screw that surpasses this century’s
highest corrosion-resistant stainless
steel screw and excels in drilling
performance.
Traditional stainless steel (Abbr.: S.S.)
screws have many drawbacks:
1) A2~A4 (the #300 Series) S.S. products have good corrosion resistance
and shiny/reflective surface appearance; however, the biggest drawback
is the lack of hardness.
2) S.S. #410, #420, #430F, #440 products achieve higher hardness through
heat treatment, however, they are
poor in corrosion resistance. These
products have imperfect/dull outer
appearance.
3) S.S. #630 (17-4) is a material which
has both high corrosion-resistance and
high hardness; however, this material
cannot cold-form and is very difficult
to work with. S.S. #630 is only suitable for hot-forming and machining.
S.S. #630 production cost is very high;
due to these reasons S.S. #630 is not
normally used in screw production.
The MOST PERFECT Stainless
Steel NSSC #550 (JOHN TEK)
screw encompasses super corrosionresistance, high surface hardness
(HV 618°~648°) and brilliant surface
appearance (as good as S.S. A2~A4).
The new NSSC #550 is a difficult
material to cold-form and to work;
originally, this material is poor in corrosion-resistance. John Chen Screw
dedicated sixteen and a half years, and
invested over 2.5 million US Dollars
in research and development solely to
discover and fine-tune the know-how
to work with NSSC #550.
After years of relentless hard work
and improvements, John Chen solved
NSSC #550 production bottleneck
and achieved perfect corrosionresistance performance. NSSC #550
screws are now in mass production.
NSSC #550 screw gained an excellent reputation in the TEK (selfdrilling screw) market in terms of
screw performance, time-saving,
easy-to-use and reliability. NSSC
#550 screws are gradually replacing Bi-Metal screws and S.S #410
screws in the market.
Serious setbacks with Bi-Metal screws
in the market are:
1) Insufficient for drilling through
stainless steel sheets.
2) Unable to drill through 10mm thick
(or above) steel sheet.
3) 4~8% breakage/failure rate while
drilling due to poor weld spot, hence increases in screw cost and labor-time cost.
4) Bi-Metal screw corrosion resistance
is only at 1/8th of NSSC #550 screws.
5) Bi-Metal screw tensile and torque
strength is only at approximately 45%
of NSSC #550 screws.
6)Small size or short length Bi-Metal
screws cannot be produced. This limits
Bi-Metal screw applications.
In summary, NSSC #550 (JOHN
TEK) screw price and application/
construction-labor cost are much
lower than Bi-Metal screws and NSSC
#550 (JOHN TEK) screw will not fail
during application.
John Chen Screw has developed more
than NSSC #550 self-drilling screws
and self-tapping screws; NSSC #550
is also used in a whole variety of customized screw products.
Please feel free to call us or drop us
an email. We welcome your inquires.
JOHN CHEN SCREW IND. CO., LTD.
No.12, Lane. 8, Dinghu 1st Street, Guishan
Township, Taoyuan County 333, Taiwan
(R.O.C.)
T: +886-3-327-7677 • F: +886-3-327-8398
E-MAIL: jce23456@ms17.hinet.net
jcscrew@hibox.hinet.net
114
KEN FORGING
1049 Griggs Rd. / P.O. Box 277
Jefferson, OH 44047 USA
Tel: +1 888 536 3674 • +1 440 993 8091
Fax: +1 440 992 0360
Web Site: www.kenforging.com
E-Mail: info@kenforging.com
MISSION STATEMENT:
THE CUSTOMER IS FIRST. Ken
Forging is committed to total customerservice satisfaction, product quality and
on-time deliveries.
MISSION OBJECTIVE:
Service is our strength
Quality is our commitment
OUR HISTORY:
Richard A. Kovach, President and
owner, began his Tool and Die business
in 1970 in a 20x20 garage in Cleveland,
Ohio. Ken Forging is a hot-drop forging, family-owned business located
in Northeast Ohio, and a domestic
manufacturer of closed-die Industrial
Hardware in carbon, alloy, and stainless
steels and custom forgings. Beginning
in 1972, when Kovach built a modest
3000 square foot die shop, through
2007, additional expansions have been
made to the Die & Forge area, Production, Impacter, Press room, Machining
Center, Shipping, and four additional
loading docks. In 2008 a twenty-three
room Office Complex brought Ken
Forging to 220,000 sq. ft. and in 2010
an additional 36,000 sq. ft. was added.
In 2014 still another 54,000 sq. ft. was
constructed to accommodate new
equipment and expanded production.
Total expanse of Ken Forging
is now 310,000 sq. ft.
Forged Industrial
Industrial Hardware
Forged
Hardware
The Forge consists of (1) #23 and (1)
#38 Die Forgers, (1) 640 ton Metric
Press, (1) 20,000Lb Hammer, (12)
Erie and Chambersburg hammers and
(4) #8 Impactors; (2) 1800-ton Forging
Presses, (2) 2" Mechanical Upsetters,
and (6) Electrical Upsetters up to 2-1/2"
capability.
VALUE-ADDED SERVICE:
Forging capabilities include (4) com-
Ken Forging provides 24 hour delivery
plete Machining Centers, (8) Landis
from stock, no minimums, competitive
and (6) Waterbury machines with
pricing, credit card option payment,
numerous support machines and equip-
prompt responses, and a courteous,
• Eyebolts
knowledgeable staff, quality control
with full traceability, technical and
• Nut Eyebolts
engineering support.
ment; (2) EDM machines, (7) Cincinnati Hydro-Tels and (5) CNC die-sinking machines; (3) CNC Drilling and
Tapping machines and (2) Turnbuckle
machines.
PRODUCTS: What We Do
Ken Forging provides distributors with
the highest quality product line of industrial hardware in carbon, alloy, 304
& 316 stainless steel with full traceability, proudly forged in the USA, to meet
Carbon • A
SALES OFFICE:
• Turnbuckles
Fittings
KEN FORGING
• Rod Ends
1049 Griggs Rd. / P.O. Box 277
• Eye Nuts
Jefferson, OH 44047 USA
Toll-Free: +1 888 536 3674
• Pad Eyes
T: +1 440 993 8091 • F: +1 440 992 0360
• Strap Clamp
Web Site: www.kenforging.com
E-Mail: info@kenforging.com
• T-Slot Nuts
or exceed customers’ expectations.
Products include: Eyebolts, Nut Eyebolts, Rod ends, Turnbuckles & Fittings, Eye Nuts (3 styles), C-Clamps
& Screws, Machine Strap Clamps, Pad
eyes, Wedges (Set-up), T-Slot Nuts,
D-Rings, Swivel Hoist Rings, Custom
Toll-Free: 888-KEN-FORGING (
Forgings capabilities up to 200 lbs.
Phone: 440-993-8091 • Fax: 440www.KenForging.com • E-mail: sales@k
115
Mectron Engineering Co., Inc.
400 S. Industrial Drive
Saline, MI 48176 USA
Tel: +1 734 944 8777 • Fax: +1 734 944 8778
Web Site: www.mectron.net • E-Mail: sales@mectron.net
Untitled-1 1
MISSION STATEMENT:
Mectron Engineering Co., Inc., is committed to the upgrading and expanded use
of today’s technology to offer its customers
solid capability and practical solutions to fill
the expanding need for quality parts in the
industrial fastener marketplace.
COMPANY HISTORY:
Mectron was founded in 1968 to design
and manufacture quality control and handling systems utilizing eddy current and
ultrasonic instrumentation.
Today, Mectron offers its own complete
line of laser, eddy current, vision and thread
inspection systems.
Individual parts are scanned and measured as they pass through Mectron’s high
speed systems. Products are inspected for
dimensions, diameters, lengths, foreign
material, thread defects, part damage, metallurgical defects, hardness, cracks, etc.
Mectron Engineering’s product development team has been awarded several patents
on laser and eddy current inspection systems.
Recent developments have yielded a new
state-of-the-art laser and integrated crack
detection which will bring part inspection
to another level.
Mectron’s Sorting Service provides contract
inspection for customers on its premises with its
various inspection systems. Parts are inspected
for a full range of quality problems.
PRODUCT LINES:
• Mectron’s LSR-30 Laser is standard on all
Q-Series and LT-Series machines. New laser
provides scanning capabilities 100 times
faster than original equipment for inspection
of tighter tolerances and critical features.
• Q-5000 Qualifier Laser and Magnetic
Imagery System provides complete dimensional and metallurgical inspection utilizing
Microsoft Windows.
• Q-2500 Modular System for inspection
with laser array for dimensional features
utilizing Microsoft Windows.
• EC500 Linear head and flange crack detection system integrated into any new or
existing Mectron Inspection machine.
• First Scan 150-R eliminates the manual
measurement process by automatically providing feedback values for time consuming
tasks like SPC and PPAP calculations.
116
• LT-350 Inspection System for overall
length, profile and metallurgical characteristics on pins, blanks and fasteners.
• LT-250 Inspection System for overall
length and profile on pins, blanks and fasteners.
• MI-8500 Inspection System uses a unique
eddy current signature analysis to inspect for
cracks, missing features, physical variations,
material mix, and hardness.
• Laser Nut Scanning System inspects for
presence of internal threads, height variations, and foreign material.
• MAP 1000, 2000 are Mectron’s automated
packaging systems for use with the above
inspection systems.
• RW80 inspects for presence of internal
threads, splines, broaches, and keyways.
MAIN PLANT
MANUFACTURING/SALES:
Mectron Engineering Co., Inc.
400 S. Industrial Drive
Saline, MI 48176
Tel: (734) 944-8777
Fax: (734) 944-8778
E-Mail: sales@mectron.net
Sales / Distribution:
Illinois, Wisconsin, Indiana
GATTCO
Tel: (630) 679-0210
Fax: (630) 679-0532
E-Mail: G.Branch@gattco.com
California, Arizona, Nevada:
Peak Machinery Sales
Tel: (760) 771-5981
Fax: (760) 771-2781
E-Mail: shafermachinery@aol.com
Ohio, Western New York
JFP Precision Concepts
Tel: (330) 220-6668
Fax: (330) 225-4300
E-Mail: john.peterson40@verizon.net
Northeast U.S.: Flanagan Group, LLC
Tel: (610) 334 3542
Fax: (432) 265 5600
Email: Jeff.Hoffman@flanagangroup.net
Brazil: Cold Forming International –
National Machinery
Tel: (55) 11 3672 2111
Fax: (55) 11 3673 2788
E-Mail: c.f.i@coldforming.com.br
10/3/2006 4:22:59 PM
France: National Machinery France
Tel: (33) 01 43 78 40 84
Fax: (33) 01 43 78 37 32
E-Mail: National.Machinery@wanadoo.fr
Germany: NME National
Machinery Europe
GmbH
Tel: (49) 911 5198-0
Fax: (49) 911 5198-220
E-Mail: sales@nationalmachinery.de
India: India King Impex
Tel: (91) 80 5113 6372
Fax: (91) 80 2225 8775
E-Mail: bajaj@IndiaKingImpex.com
Italy: Corvetta
Tel: (39) 0471 978903
Fax: (39) 0471 978011
E-Mail:
RenzoCorvetta@agenziacorvetta.com
Japan: National Machinery Asia
Tel: (81) 568 89 0571
Fax: (81) 568 89 0572
E-Mail: macshimo@aol.com
Spain: National Machinery
Tel: (34) 93 301 95 10
Fax: (34) 93 302 46 22
E-Mail: Sigfrid.martinez@nationalmachinery.eu
United Kingdom: National Machinery UK
Tel: (44) 121 585 9846
Fax: (44) 121 501 1936
E-Mail: kevin.beirne@nationalmachinery.eu
Southeast Asia: National Machinery
Global Technology
Tel: (86) 512 66161698
Fax: (86) 512 66161678
E-Mail: kenchan@nationalmachinery.cn
Turkey: Herkul Industrial Packaging & Machinery Ind.
Tel: +90 (216) 365 36 93
Fax: +90 (216) 365 36 94
Email: salimsarigul@herkulmakina.com
MITSUTOYO-KIKO CO., LTD.
1-4 Higashino Shin-Machi
Kasugai City, Aichi Pref. 486-0816, Japan
Tel: +81 568 81 4111
Fax: +81 568 84 8777
Web Site: www.mitsutoyo.co.jp
E-Mail: office@mitsutoyo.co.jp
MISSION STATEMENT:
Our mission is to design and manufacture cold forge tooling for the advanced
cold forging process.
COMPANY HISTORY:
We have been serving the cold forge
tooling market since June 1965. Our
patented Double Hex Series (cold forge
tooling with segmented insert) is now
well-known in Japan for its precision,
quality consistency and long-lasting life.
We have been providing our products to
the overseas market for the past 25 years.
We opened our North American branch
office in Illinois, USA, in April 2002 to
serve our growing number of clients in
North America. Cumulative experience
in our North American branch office
has contributed to our success in our
international expansion since then. In
addition to advanced tooling design and
manufacturing technique, our speedy
customer support now guarantees our
clients’ satisfaction worldwide.
PRODUCTS:
• Double-Hex Series. Flange punches
and nut forming dies that contain segmented carbide insert, which relieve
pressure in the compressed area of
punches and dies during the cold forging process attain their long-lasting
lives. We accept orders from a single
carbide insert.
• Nib Series. Nib and rings for up-set
system.
• Complete Die & Punch. Custom
made dies and punches manufactured
with our selected carbide and particular mount rate. We can figure out
which carbide and what mount rate is
the best for our clients’ use.
• Steel Tool. Punch cases, die cases,
sleeves and trimming dies solely
manufactured by our own machinery
including advanced vacuum furnace.
We promise their precision and quality
consistency.
• Impact & KO pin. We can arrange
the material composition of Impact
and KO pin to attain the best quality
for our clients’ use.
constantly renew our machineries to
serve our clients with top manufacturing technology. In addition, some
of them are completely custom made
that other companies may not be able
to provide. That enables us to accept
orders even if turned by others. With
our vast plant, we have high production capacity. That allows us to deliver
our products, even on short notice.
SALES OFFICES:
Europe, Asia
Mitsutoyo-Kiko Co., LTD.
1-4 Higashino-Shinmachi
Kasugai City, Aichi Pref.
486-0816 Japan
Tel : +81 568 81 4111
SERVICE:
Fax : +81 568 84 8777
We offer our clients various tooling
related customer supports before
and after the delivery. With our U.S.
branch office and Japan head office,
we promise timely delivery and speedy
customer support worldwide.
E-Mail : office@mitsutoyo.co.jp
PLANT & EQUIPMENT:
Rolling Meadows, IL 60008 USA
Our main production base is located in
Kagoshima, a prefecture in southern
Japan. We are expanding plant size
and increasing the number of skilled
workers to prepare for future orders.
Our vast plant and advanced machineries is one of the reasons we promise
products’ consistent quality, their
long-lasting life and timely delivery.
Web Site : www.mitsutoyo.co.jp
North America
Mitsutoyo-Kiko U.S.A. Inc.
1600 Golf Rd., Suite 1200
Tel : +1 847 981 5200
Fax : +1 847 981 5208
E-Mail: tomozaki@mitsutoyo.co.jp
We have machineries required for all
manufacturing processes. Full-scale
manufacturing gives our products an
advantage in quality consistency. We
117
Nakashimada Engineering
Works,
Ltd.Ltd.
Nakashimada
Engineering
Works,
1164-4 Hiyoshi, Hirokawa, Yame
1164-4 Hiyoshi, Hirokawa, Yame
Fukuoka 834-0196, Japan
Fukuoka 834-0196, Japan
Tel:
+81
943
4331
Tel:
+81
943
3232
4331
Fax:
+81
943
5134
Fax:
+81
943
32 32
5134
Web
Site:
www.nakashimada.co.jp
Web
Site:
www.nakashimada.co.jp
E-Mail:
sales@nakashimda.co.jp
E-Mail:
sales@nakashimda.co.jp
MISSION STATEMENT:
Italy:
MISSION STATEMENT:
2006: MST606 series (6D6B) The West Coast and Midwest:
Nakashimada’s technical leaderManassero
& C. srl Ltd.
MST606
series
(6D6B)
TRF510
(5D5B
Loomis
International,
technicalisleader- 2006:
ship as Nakashimada’s
a header manufacturer
Re-header)
Email:randy@loomisltd.com
info@manassero.eu
Re-header)
ship as a header manufacturer is TRF510 (5D5B
Email:
based primarily on satisfying the
MST716
seriesseries
(7D7B)
based primarily on satisfying the 2007:
2007:
MST716
(7D7B)
demands
and and
understanding
thethe needs
demands
understanding
2008:
EXL3-8
2008:
EXL3-8
Italy,
Switzerland,
U.K. Liechtenstein,
& Ireland:
needsofoffastener
fastenermanufacturers,
manufacturers,worldCzechRepublic,
Poland,
France,
(3D3B
ExtraExtra
Long)
(3D3B
Long)
Metalform Incorporated
Ltd.
worldwide.
Nakashimada
been
wide. Nakashimada
hashas
been
the true
Spain
and
Portugal:
RD70
(1D2B
Re-header)
RD70
(1D2B
Re-header)
Email:
the true
definition
of Precision,
definition
of Precision,
Quality and 2010: BTX/BT series bolt
Manassero
& C. srl
2010:
BTX/BT
series
bolt
metalform-inc@btconnect.com
Quality
and
User
Friendliness
for
User Friendliness for over 100 years.
Email:
info@manassero.eu
former
(3D3B-6D6B)
(3D3B-6D6B)
former
over 100 years.
2011:
MF140
(1D2B)
2011:
MF140
(1D2B) COMPANY HISTORY:
Turkey:
U.K.
& Ireland:
NB42
(Ball
Header)
NB42 (Ball Header)
COMPANY
HISTORY:
Founded
in 1911 and driven
Metalform
Incorporated
Ltd.
Herkül Endüstriyel
Paketleme
forward
by
their
continual
focus
Founded in 1911 and driven forward KEY PERSONNEL:
& Makine
Sanayi
metalform-inc@btconnect.com
Email:
KEY PERSONNEL:
on their
founding
by their
continual
focusprinciples
on their of Masahiro Nakashimada
Email:
Masahiro Nakashimada
functional
superiority,
technical infounding
principles
of functional
Turkey:
salimsarigul@herkulmakina.com
President
President
novation, technical
best-in class
quality and
superiority,
innovation,
Herkül
Endüstriyel Paketleme
Suetoshi Furuie
user class
friendliness,
the company
best-in
quality
and userhas
&
Makine
General Manager, Sales Dept.
Korea: Sanayi
impressed the
most sophistiSALES MANAGERS:
friendliness,
theworld’s
company
has
Email: salimsarigul@herkulmakina.com
cated customers
choose only
Seoul Trade Company
Tatsuya Seki, Japan Market
impressed
the who
world’s
mostthe
SALES
OFFICES:
best
and
seek
the
highest
quality
and
sophisticated customers who choose
Email: sarchang@hanmail.net
Stuart Tsang,
Korea:
Nakashimada
USA
Nakashimada
only total
the satisfaction.
best and seek
the highesthas Phone:+1-562-926-2419
Business Development Director; Seoul Trade Company
enhanced
design satisfaction.
and machinery
quality
and tooltotal
Sales Manager, Asia Pacific
Australia:
Email:
sarchang@hanmail.net
building tohas
createenhanced
a true art tool
form, Fax: +1-562-404-2342
Nakashimada
Email:
a trait
demands
inordinate
Hasmac Techform Pty. Ltd.
design
and which
machinery
building
to
OFFICES:
krista.poirier@nakashimada.us
amounts of creativity, technique, and SALES
Australia:
Email: hasmac@attglobal.net
create a true art form, a trait which
Nakashimada USA patience. Nakashimada has a product Nakashimada
Hasmac
Techform Pty. Ltd.
Europe
demands inordinate amounts of
Phone: +1-562-926-2419
line that ranges from Micro Headers Phone:
Email: hasmac@attglobal.net
+49(0) 911-5690 881
Fax: +1-562-404-2342
creativity, technique, and patience.
Russia:
to 2die 3 blow machines, fingerless Fax: +49(0) 911-5690 880
Nakashimada has a product line that
Email: krista.poirier@nakashimada.us
WSD Werkzeugetransfer to multi station part formers, Email:
Russia:
ranges
Schrauben-Drehteile
GmbH
andfrom
boltMicro
to ballHeaders
headers to 2die 3
Nakashimada
Europe
narumi.fukui@nakashimada.org
WSD
Werkzeugeblow machines, Fingerless transfer to
Email:
ISO14001 certified in 2010.
Phone: +49(0) 911-5690 881
Schrauben-Drehteile GmbH
multi station part formers, and bolt to
wsd-moscow@wsd-moscow.ru
Nakashimada
Ronderson
Fax:
+49(0)
911-5690
880
Email: wsd-moscow@wsd-moscow.ru
ball headers
Machinery
Limited
China
narumi.fukui@nakashimada.org
Nakashimada
has
ISO14001
certified
inmade
2010.continu- Email:
Phone: +86 (0) 755-822-11008
ous developments and introduc- Nakashimada
NorthWest
WestChina,
China,
North
Fax:
+86(0)Ronderson
755-612-37382
Aerospace
industry,
tions
of
the
following
heading
Aerospace
industry,
Email:
Nakashimada has made continuous
Machinery
Limited China
Hotheading
headingmachines:
machines:
machines.
Hot
New@Ronderson.com
developments and introductions
Phone: +86 (0) 755-822-11008
Affinityinternational
internationalllc
llcLtd.
Ltd.
Affinity
AGENCIES:
of the following heading
Fax: +86(0) 755-612-37382
2001:
MST612
series
(6D6B)
Email:
john@affinityintl.com
Email:
john@affinityintl.com
The
East
Coast and Canada:
machines.
Email:
new@ronderson.com
MHC130A (1D2B)
FH Machinery Inc.
MST408
(4D4B)
Email:
India:
AGENCIES:
2001: 2002:
MST612
series series
(6D6B)
India:
harry@fhmachinery.com
M/S Janaksons International
2003:
EXL2-8
(2D2B
The East Coast and Canada:
MHC130A (1D2B)
M/S Janaksons International
Extra
Long)
Email: ashwanibehl@janaksonsintl.com
FH Machinery Inc.
2002:
MST408 series
(4D4B)
The West Coast and Midwest:
Email:
MST616
Email:harry@fhmachinery.com
2003: 2004:
EXL2-8
(2D2Bseries (6D6B)
Loomis
International, Ltd.
ashwanibehl@janaksonsintl.com
Extra Long)
Email:
RANDY@LOOMISLTD.com August 2012/Fastener Technology International xx
2004:
MST616
series (6D6B)
118
National Machinery
161 Greenfield St.
Tiffin, OH 44883 USA
Tel:+1 419 447-5211
Fax:+1 419 443-2379
Web: www.nationalmachinery.com
COMPANY PROFILE:
National Machinery LLC is the world
leader in the design, development and
manufacture of cold and warm forming
machines that produce metal parts from
coiled wire, bars, slugs or preforms.
Through our continuing research and
development, advanced manufacturing
capability and worldwide network of
sales and service locations, National
Machinery has fi rmly established its
position as the “World Standard for
Excellence” in cold forming machinery
technology.
National machines and processes are
used in nearly every industrialized country in the world. The parts they form are
critical components in everything from
bicycles to aircraft, and include:
Fasteners: Rivets, bolts, and nuts.
Automotive Parts: Complex shapes
like spark plug shells, gears, wrist pins,
components for shock absorbers, grease
fittings and valve spring retainers.
Parts for the Bearing Industry: Inner
and outer bearing races, precision balls,
tapered and cylindrical rollers.
National Service includes machine service, replacement parts, remanufacturing, tool design assistance and operator
and maintenance training.
National Service Centers are in Tiffin, OH, USA; Nagoya, Japan; Suzhou,
China; and Nürnberg, Germany.
PRODUCT LINES:
FORMAX®2000 progressive formers are high performance cold formers
available in 2 through 6 dies with cutoff
ranging from 8 mm to 17.7 mm, speeds
to 400 ppm and forging tonnage to 140
metric tons. Fast changeover with offline setup, Zero Clearance ram guiding
and Formatrol PC controls continue to
make FORMAX the productivity leader
in cold forming machinery.
FORMAX PLUS formers, in 3 through
7 dies, meet the challenge of difficultto-transfer and extra high heading load
jobs with the patented Pick-Move-Place
transfer and Zero Clearance ram guiding.
FORMAX PLUS has all the standard
FORMAX 2000 benefits, plus increased
tonnage, larger cutoff capacity and ex-
panded die space in short, medium and
long work ranges.
FORMAX PLUS for Large Parts,
includes 5 and 6 die formers in short,
medium and long work models. This
family of large formers is available in
cutoff diameters up to 34 mm and tonnage up to 600 metric tons.
FORMAX XXV is a new version of
FORMAX. It combines the best features
from small and large FORMAX with all
new technology including servo controlled adjustments, expanded die-space
and high production speeds—all in a 25
mm cut-off machine.
FORMAX Extra Long (XL) are five
die cold formers that are designed for
those long parts that demand additional
feed and kickout. The formers are available in cutoff diameters from 16-34 mm
and kickout ranges up to 360 mm.
FORMAX LeanFX is a new line of
cost effective FORMAX for the fastener
market. It comes in M8, M10, M14 and
M18 models. The M10 model can form
fasteners at speeds up to 300 parts per
minute.
BEARING Headers are dedicated
machines for the bearing industry. These
rugged headers form balls and tapered
or cylindrical rollers at extremely high
speeds with exceptional quality.
MICROFORMERS produce miniature
parts for medical and electrical industries, such as fluorescent light tube pins
and other close tolerance parts as small
as 3 mm diameter.
CLEANING EQUIPMENT including
the full line of CTG/Ransohoff aqueous
cleaning units for cold formed parts.
Met-MAX Innovations™ is the group
of tool design engineers, tool manufacturers and test engineers that have the
experience and technology to design
and develop innovative and complex
part processes.
Used Machinery includes any cold
forming plant equipment to sell, buy
or broker. The OEM has the most
knowledge of used Nationals and their
locations.
SALES OFFICES
Asia
Shanghai, China
Tel: 86 21 624 85250
Fax: 86 21 624 86270
Suzhou, China
Tel: 86 512 66161698
Fax: 86 512 66161678
Nagoya, Japan
Tel: 81 568 89 0571
Fax: 81 568 89 0572
Tokyo, Japan
Tel: 81 42 713 3071
Fax: 81 42 713 3072
Moscow, Russia
Tel: 7 495 781-91-01
Fax: 7 495 781-91-02
Europe
Birmingham, England
Tel: 44 121 585 9846
Fax: 44 121 501 1936
Paris, France
Tel: 33 1 4378 4084
Fax: 33 1 4378 3732
Nürnberg, Germany
Tel: 49 911 5198 0
Fax: 49 911 5198 220
Bolzano, Italy
Tel: 39 0471 978903
Fax: 39 0471 978011
Barcelona, Spain
Tel: 34 93 301 9510
Fax: 34 93 302 4622
North America
Mexico City, Mexico
Tel: 525 55 311 4370
Fax: 525 55 311 3998
Tiffin, Ohio, USA
Tel: 419 447 5211
Fax: 419 443 2379
South America
Sao Paulo, Brazil
Tel: 55 11 99971 6047
Fax: 55 11 348 49303
119
120
121
Ningbo WEIFENG Fastener Co., Ltd.
1606, Zhongsu International Building
No. 232, Xinjian North Road
Yuyao City, Ningbo, China
Contact Person: Tony Yin
Tel: +86-574-22718666 • Fax: +86-574-22713099 • Mobile: +186-15958817094
Web Site: www.weifeng-fastener.com
E-Mail: tony@wf-fastener.com
MISSION STATMENT:
Our target is to provide high quality, reasonable price as well as
consideration service to prove our
ability and honesty.
COMPANY INTRODUCTION:
Ningbo WEIFENG Fastener Co.,
Ltd specializes in hardware, for
example anchors, screws, bolts,
nuts and tools. The company is
located in Yuyao City, which is
one of the most important fastener industrial bases in China and is
easy of access. It takes half hour
to Ningbo city by high way while
3 hours to Shanghai. WEIFENG
acquires good experiences in the
line of this field that they offer
products with high quality and
reasonable price as well as our
consideration service. Besides
manufacturing, WEIFENG also
deals with directing imports and
exports business. Their products
are of various kinds, according
with the following standards:
GB, DIN, JIS and ANSI and
they can also accept orders of
other specification as customer’s
requests WEIFENG pleasure to
establish favorable long-term
cooperative relationship with the
clients on the basis of equality
and mutual benefit.
PRODUCT LINE:
We can manufacture full range
of products and If the products in
the website directory do not meet
your requirement, please send the
information to us and we accept
special orders.
• Anchors
• Bolt Nut Washers
• Self Tapping Screws
• Self Drilling Screws
• Stainless Steel Fasteners
• Copper Fasteners
• Automobile Fasteners
• Other Fastener Series
HIGHLIGHT PRODUCTS:
Drywall Screws
Specification: 3.5x25, 3.8x64 and
other sizes. One of the self tapping
screws widely used in furniture
building, construction and metal
processing. Zinc plated or black /
gray Phosphorus. Trumpet, cross
slot, after quenching.
Wedge Anchor
Specification: 6x40—24x350.
Used in dense concrete and natural
stone, metal structures, metal profiles, floor, support plate, brackets,
122 Fastener Technology International/August 2014 railings, windows, walls, machines, beams, stringers, brackets,
etc. Iron or stainless steel made.
Zinc plated.th longer stead is easy
to install and accepts heavy duty.
Nylon Plug
It is also named NYLON FISH
ANCHOR. Specification: 4 x 20 16 x 80. Set on self-tapping screws
to have expansion effect. Nylon
Plug is tough, wear and impact resistance, Acid proof and corrosion
proof. Temperature ranges from
-40°C to 80°C. Good insulation
and tension ability.
SALES OFFICE:
Ningbo WEIFENG Fastener Co., Ltd.
1606, Zhongsu International Building
No. 232, Xinjian North Road
Yuyao City, Ningbo, China
Contact Person: Tony Yin
Tel: +86-574-22713000
Fax: +86-574-22713099
Mobile: +186-15958817094
Web Site: www.weifeng-fastener.com
E-Mail: tony@wf-fastener.com
Nucor Fastener Division
NUCOR FASTENER: We
Sweat the small stuff
RIGOROUS TESTING FOR QUALITY
When it comes to manufacturing
We test all our production lots to
products, we’re about as meticulous
ensure absolute quality. Throughout
as they come. That’s because the
the manufacturing process, we uti-
painstaking attention we give to
lize in-process controls and conduct
the smallest details has consistently
mechanical and dimensional audits
yielded the biggest results for our
to continuously monitor our quality.
customers. It’s this simple approach
Final inspections are conducted in
to production which has made Nucor
our accredited lab prior to packaging.
Fastener an industry leader since we
This rigorous testing has earned
formed our first bolt in 1986.
us our quality system registrations, including ISO9001:ANSI/
EXPANDED PRODUCT LINE, CUSTOM FINISHES
Our capability ranges from 1/4" (M6)
diameter through 1-1/4" (M30), in
lengths up to 10" (250 mm). Our
production takes place almost entirely within our 550,000-square-foot
facility. Our large number of bolt
makers provides capacity to meet
customer needs, allowing for redundancy across all sizes. In fact, when
it comes to producing bolt diameters
3/4" (M20) and larger, we have one of
ISO/ASQ Q9001-2008 and ISO/TS
16949:2009. This attention to detail
with respect to the environment
has also earned our plant ANSI/ISO
14001:2004 registration of our Environmental Management System.
We also offer rotational capacity
(ROCAP) testing, and paperwork
is available for Production Part Approval Process (PPAPs) and ISIRs
(Initial Sample Inspection Report).
the world’s largest capacities.
RED, WHITE, BLUE … AND GREEN
We manufacture high-quality hex
All our products are made from steel
head cap screws, finished hex nuts,
that’s 100 percent melted and rolled
structural bolts, nuts, assemblies and
in the U.S. With sister division Nu-
flange bolts. We’ve also expanded our
cor Nebraska as our dedicated steel
product line to include build-to-print
source, our fasteners are backed by
fasteners. We customize head styles,
the Nucor name from start to finish.
dimensions, grades and finishes to
With Nucor serving as the largest
meet individual specifications. And
recycler of steel in the western hemi-
through strategic alliances with pro-
sphere, the steel used at Nucor Fastener
cessors, we accommodate special
is made from recycled steel. That can
finishes, patches, adhesives and other
help you qualify for “Green Building”
secondary processing requests.
or LEED program projects.
SOLVING ISSUES, SHARING BEST PRACTICES
We outperform overseas competitors
by making ourselves available and
accountable.
Before, during and after, we’re there
for you. We offer support by way of
our financial strength, engineering
staff and trained personnel. Whether
providing technical assistance, solving application issues, or simply
discussing current specifications and
recommended best practices, we will
help find the right solution.
When you need us,
call: (800) 955-6826 from 7 a.m. to 5:00 p.m. EDT,
fax: (260) 337-1726,
e-mail: sales@nucor-fastener.com
or visit: www.nucor-fastener.com.
123
The Leading Global Supplier of Fastener Tooling
company profile:
Precision Tools Group is the
leading global supplier of the
complete range of tools required
by fastener and special formed
parts manufacturers. Our products cover the broadest range of
applications in the aerospace,
automotive and general industrial market sectors. We are
committed to premier customer
service throughout our focused
operations and customer friendly service centres. PTG believe
the combination of the strongest
brands, low cost manufacturing
and our dedicated regional sales
and services centres provides
the winning strategy to meet
the demanding needs of our
customers.
Our brands, Reed, Hi-Life Tools,
and Howell Penncraft are some
of the longest established, strongest and technically competent
servicing the fastener industry.
We enjoy a world-class quality reputation utilizing state-ofthe-art equipment and facilities
together with active product
development programs. Precision Tool Group is working hard
to be your one stop shop for all
your fastener tooling requirements
Our broad range of tooling is
manufactured in a variety of
materials, heat treatment and
surface treatment options to
maximize tool life and minimize
tool ownership costs.
Hi-Life tools have been providing a Heat Treatment Service for a wide range of tool
making, engineering and medical device companies for over
the 20 years. The company
has built up a vast amount of
experience of heat treating a
wide range of metals from tool
steels, HSS, stainless steels
and exotic metals. These can
be treated using the standard
processes or a bespoke process can be developed to suit
the customer requirements.
Please contact us or see our
website www.ptgtools.com
for additional information on
our Heat Treat Services that
we can offer.
PRODUCTS:
• Complete range of Flat Thread
Roll Dies (including licensed products)
• Cylindrical Thread Roll Dies
• Planetary Thread Roll Dies
• Form Rolling
• Trim Dies
SERVICE CENTERS:
AMERICAS
North American Service Center
28 Sword Street
Auburn, MA 01501 USA
Toll-Free: +1 800 343 6068
Tl: +1 508 753 6530
Fx: +1 508 753 0127
Email: nasc@ptgtools.com
EUROPE
European Service Centre
Hi-Life Tools
Bays 122-125
Shannon Industrial Estate
Shannon, Co. Clare
Ireland
Tl: +353 61 239503
Fx: +353 61 239502
Email: esc@ptgtools.com
ASIA
Asia Service Center
8 Nan Bang Road
Kunshan
Jiangsu Province, China
Tl: +86 512 5771 9210
Fx: +86 512 5771 5660
Email: nasc@ptgtools.com
VISIT OUR WEBSITE:
www.ptgtools.com
124
Rotor Clip Company, Inc.
187 Davidson Avenue
Somerset, NJ 08873 USA
Tel: +1 732.469.7333
Fax: +1 732.469.7898
Website: www.rotorclip.com
E-Mail: sales@rotorclip.com
COMPANY PROFILE:
Rotor Clip is a global manufacturer
of retaining rings, spiral rings, wave
springs and self-compensating hose
clamps. Headquartered in Somerset,
NJ, Rotor Clip also has operations in
Sheffield, England, Idstein, Germany,
The Czech Republic, and Shanghai,
China - providing worldwide service
to its customers.
The Somerset, USA facility occupies
280,000 square feet on 24 acres. All
processes are conducted in house ensuring the quality and reliability of the
products produced. These processes
include engineering, which designs the
tooling required to produce retaining
rings, tool and die making, stamping
and wire forming, heat treating, postfinishing, packaging, warehousing and
shipping.
PRODUCT LINE:
Rotor Clip is the only manufacturer
in the world offering all three major
types of retaining rings: tapered, constant section and spiral. These are made
to inch, DIN, ANSI metric and JIS
standards in carbon steel, stainless steel
and beryllium copper.
Unlike other companies we don’t
claim one retaining ring is better than
another. Rather, it’s about your application and what you need to make it work.
With the help of Rotor Clip engineers,
you’ll find the one retaining ring that
works best for you, rather than the one
that’s best for us to sell you.
Rotor Clip military retaining rings
are also available, manufactured to
military specifications under Cage
Code 07382.
Stainless steel parts for military
need to be made from PH15-7 stainless
material, which Rotor Clip can provide.
This material is not readily available in
Europe and the Pacific Rim, limiting
the ability of other sources to provide
certified rings to their customers.
MS parts made from High Carbon
Spring Steel are also available; manufactured domestically, and processed
from Rotor Clip’s extensive catalog
of tooled parts. Finishes include: Cadmium; Zinc Dichromate, and Phosphate.
Stainless steel and beryllium copper
parts have been certified as domestically melted by raw material suppliers
for purposes of DFARS 252.225-7014,
“Preference for domestic specialty metals.” Certifications are provided Free
of Charge.
Rotor Clip also offers single turn,
multi turn, and nested wave springs. A
wave spring is made from coiled flat
wire with waves added to give it a spring
effect. Wave springs are superior to coil
springs in certain applications because
they provide lower work heights with
the same force. This not only provides
for space savings, but also smaller assemblies that use less materials, hence
lower production costs.
THE GREEN FASTENER:
Using Rotor Clip retaining rings in
place of threaded fasteners where appropriate reduces scrap and hazardous waste
caused by machining shoulders and use
of excess cutting fluids. Our wave springs
provide lower work heights than coil
springs with the same force – resulting in
smaller assemblies that use less material.
Rotor Clip products can be produced to
meet the requirements of the RoHS and
ELV directives.
QUALITY:
Rotor Clip is dedicated to providing customers with a part that exceeds
standard specifications. This includes
providing documentation showing
critical quality, material & heat treating specs, as well as lot traceability
and country of origin. Rotor Clip is
certified to ISO/TS 16949, ISO 9001
and AS9100.
SERVICE:
Rotor Clip is not just a manufacturing facility. It is a support center for
customers from the moment of contact.
Whether it’s placing an order, needing
design assistance, or finding the right
part, Rotor Clip is there to help throughout the business relationship.
The Rotor Express program provides
customers with small package quantities
of retaining rings that would otherwise be
too costly to process from Rotor Clip’s
facility. Through a series of partnerships
throughout the country, customers can
purchase low-volumes of product at
extremely competitive prices.
SALES OFFICES:
Rotor Clip Company, Inc.®
World Headquarters
187 Davidson Avenue
Somerset, NJ 08873 USA
Tel: +1 732.469.7333
Fax: +1 732.469.7898
Web Site: www.rotorclip.com
Czech Republic
Pražská 403, CZ-411 18 Budyně nad Ohří
Czech Republic
Tel: +420.416.863.168
Fax: +420.416.863.193
E-mail: rotorclipcz@rotorclip.com
United Kingdom
Unit 6, Meadowbrook Park
Holbrook, Sheffield, S20 3PJ
United Kingdom
Tel: +44 (0) 114.247.3399
Fax: +44 (0) 114.247.4499
E-Mail: rcltd@rotorclip.com
Germany
Buchwiese 3, D-65510
Idstein, Germany
Tel: +49 (0) 6126.22736.0
Fax: +49 (0) 6126.22736.19
E-Mail: rcgmbh@rotorclip.com
People’s Republic of China
Room 1510~1511, JH Plaza
2008 Huqingping Road
Shanghai, 201702
People’s Republic of China
Tel: +86.21.3115.5558
Fax: +86.21.3115.5556
E-mail: china@rotorclip.com
125
Sacma Limbiate Spa
Viale dei Mille,126/128
20812 Limbiate (MB) Italy
P.IVA: IT 00811010966
Tel: +39 02 994521
Fax: +39 02 99050185
Website: www.sacmagroup.com
SACMA S-FORGING, MOST
ADVANCED COLD & WARM FORMERS:
Sacma Limbiate Spa is confirmed as the
most advanced and competitive company
worldwide in designing and manufacturing
cold and warm headers. The Sacma R&D
Department enables the Group to supply innovative solutions to the fastener and special
parts industries.
Sacma designs and manufactures its products all in-house. Once completed the R&D
part, its factories take care by themselves of
the production of the components. Sacma is
the only one manufacturer in this field having
100% of the spare parts immediately available
for the customers.
Moreover Sacma Group is the best solution because of its complete machine range
and powerful structure, able to guarantee the
co-operation as well with the bigger fastener
manufacturers as with the medium and small
companies.
For the production of Net Shape special
parts, Sacma introduces the new release of
its 6 dies progressive headers inspired by the
S-Forging concept. The new touch screen
panel SC-Matic is facilitating the tool set up,
taking under control the process through the
machine supervision and management. Sacma
can guarantee the quality of the produced parts
using the new LoadMatic, by monitoring the
loads and driving the discharging device for
the n.c. parts with the transfer fingers or a gate
before the finished parts conveyor.
The Sacma Transfer System with its 7
strategies of transferring, consolidates its
position of excellence, for its capacity to handle
the wider range of parts, starting from shortest
to the extra-long ones, at maximum production speed. The introduction of the patented
Transfer Support Assist Package extends
the transferring performance to more difficult
tapered and stepped parts. The Timed Desmodrive cams allows the transfer of the most
difficult parts adjusting the timing of departure
of the transfer rack after each forging operation.
With the S-Forging concept, Sacma offers
a revolutionary wire feeder: the S-Feed Sys-
tem. This unique and patented system allows
to feed the header in the most precise and
simplest way available today. The patented
S-Feed System by means of one or two servomotors according the machine size, allows to
engage the wire while the machine is stopped
and also to pull back the wire automatically
without any manual operation. With this new
device, the operator has only to set-up the
length of the blank on the SC-Matic Touch
Screen Panel Control and the machine takes
care about the over or lower wire feeding.
Another strategical point is the possibility to
use the S-Feed in alternate blow mode to
reduce the machine load.
The S-Feed System is supplied on the
warm formers as a standard feature to feed the
machine automatically and to pull back the wire
when the machine stops in order to take back
the wire from the induction coils. The S-Feed
is also available as option for the progressive
cold formers.
The Warm Formers are the best answer
to the customer’s request in this field, where
Sacma found the optimal solutions to realize
an absolutely user friendly machine. This
header is providing the automatic wire introduction through the induction coil and ensures
its pull back whenever the machine stops.
Using the touch screen panel, the operator
can manage the process by changing directly
the parameters of the heating system, as the
temperature, length of blank and the production speed. Consequently, the machine drives
all modules automatically.
Respecting the Environment, the Drive
Unit, consisting of a flywheel with the
clutch-brake integrated into the enclosure
together with the new generation of Inverters, allows energy recycling and reduces
energy consumption, making the machines
Eco-Friendly.
The Sacma S-Forging is the result of a
concentration of best technologies applied
to cold and warm formers to create the most
precise and reliable machines available.
www.sacmagroup.com
INGRAMATIC I-THREAD, INNOVATIVE & INTELLIGENT THREADER:
Sacma Group introduces its new I-Thread
concept high speed thread and profile rolling machines for the fastener industry. The
Ingramatic R&D Department developed exclusive systems including a new computerized
starter unit for tooling set-up and motorized
adjustment of the die match for higher final
product accuracy.
Ingramatic designs and manufactures its
products all in-house. Once completed the R&D
part, the Sacma factories take care by themselves
of the components production. Ingramatic is the
126
only one manufacturer in this field having 100%
of the spare parts immediately available for the
customers. Moreover Ingramatic is the best
solution also because of its complete machine
range and powerful structure, able to guarantee
the co-operation as well with the bigger fastener
manufacturers as with the medium and small
companies.
The adjustment and set up of the machine
is achieved through the remote Electronic
Handwheel, eliminating the use of hand tools.
This device provides the operator precise control of the height position and the width of the
rails, the die match with the adjustable position
of the drive unit, and the set-up of the double
starter unit. Thanks to this solution, set-ups
can be made in less than 2 minutes using the
touchscreen panel!
The New Introduction System (patented)
of the single or double starter unit is activated
by servomotors utilizing high precision pinionrack units to control the movement of the starter
slides.
The “M-Group” provides the motorization
of the drive unit and slide body position for quick
and accurate control of the die match.
The New Frame with the High Pressure
hydrostatic Lubrication of the slide makes the
I-Thread the most precise and reliable machine
for high tensile parts.
The new QTC Washer Assembly Unit
is now available for the most exigent users;
Ingramatic can supply as option a new system
in order to save time during the production
changeover. This QTC Washer Assembly
Unit allow to the operator to set up the tools
in the tool room and to save time on board of
the machine.
Respecting the Environment, the New
Drive Unit, consisting of a planetary gearbox
integrated inside the flywheel together with
the clutch-brake, allows energy recycling and
reduces energy consumption, making the machines Eco-Friendly.
The Ingramatic I-Thread is the result of
a concentration of best technologies applied
to thread rolling to create the most precise
and reliable machines available. www.sacmagroup.com
SCIENTIFIC FORMING TECHNOLOGIES CORPORATION (SFTC)
2545 Farmers Dr., Ste. 200
Columbus, OH 43235 USA
Tel: +1 614 451 8330 • Fax: +1 614 451 8325
Email: sales@deform.com
Website: www.deform.com
COMPANY PROFILE:
Scientific Forming Technologies Corporation (SFTC) was founded in 1991
with a mission to provide state-of-the-art
design and analysis technology to the
metal forming industry. SFTC develops,
markets and supports the DEFORM™
System, which is used at hundreds of
sites world-wide.
The SFTC staff has extensive experience
in developing FEM (Finite Element
Method) software to analyze metal
forming processes. SFTC principals
developed ALPID and DEFORM during
the 1980’s while at Battelle Memorial
Institute. ALPID is known as the first
practical FEM-based analysis tool with
an industrial user base. ALPID was
followed by DEFORM, which SFTC
acquired from Battelle in 1991.
PRODUCT:
DEFORM is an engineering software
system used to analyze metal manufacturing processes including forming, heat
treatment, machining and mechanical
joining. It provides a virtual trial run
environment that allows testing on the
computer rather than the shop floor. It
has been used to solve metal forming
problems, optimize production processes and improve tool and die life in
countless industrial cases.
DEFORM is the most widely used bulk
forming process simulation system
in the world. It serves the aerospace,
automotive, transportation, energy,
medical, fastener and ordinance industries. Hundreds of companies, ranging
from large multi-national corporations
to small family-owned businesses, rely
on DEFORM throughout the design, development and manufacturing process.
Noteworthy technical and commercial
milestones started with the introduction
of DEFORM-2D, the first code with
fully automatic remeshing, in 1989.
DEFORM-PC, released in 1994, was the
first metal forming simulation software
running on WINDOWS. This made
it feasible for small-to-medium sized
manufacturers to use simulation. Within
a few years, DEFORM-3D, running
on WINDOWS, with fully automatic
remeshing made simulation practical
for most forming processes.
Heat treatment and grain size material
modeling was developed more than
15 years ago, before it became trendy.
Design Of Experiments (DOE) and optimization of the entire process has been
under development for years.
The release of DEFORM V11 in 2014
represented a new milestone in process
simulation technology. Considered the
“next generation” of DEFORM, V11 is a
quantum leap in functionality, resulting
from years of research and development. It includes an integrated multiple
operation environment that has allowed
DOE, optimization and advanced material modeling tools to become a reality.
EXPERIENCE:
The SFTC staff has over 5 decades of
experience in industry. The result is
a first-hand understanding of the issues faced by users. This experience
contributes to practical DEFORM developments and unparalleled technical
support. The DEFORM team is highly
focused on contributing to the success
of every DEFORM user.
SFTC is known and respected in academia, government and industry. The
vast majority of the development staff
holds a PhD or Master’s degree from
leading universities. SFTC is a regular
participant in sophisticated research
projects. Staff members are also regular
contributors to technical conferences,
journals and educational workshops.
NEW DEVELOPMENTS:
SFTC has been the leader in process
simulation for decades. The company
has maintained that position by being
first to the market with new capabilities.
Today, SFTC is the undisputed leader
in DOE, optimization and material
modeling. We are already working on
capabilities that will mature years from
now. The objective of DEFORM development is to simulate the entire process
chain, from raw material to final part.
This will allow manufacturing history
to be accounted for in end-product life
predictions, resulting in products that
thrive in service and in the market.
GLOBAL DISTRIBUTION:
SFTC is located in Columbus, Ohio
and has a global distribution network
of highly qualified distributors. The
company also collaborates with leading universities world-wide in Europe,
Asia and North America. Please visit the
DEFORM website for details.
CONTACT:
John Walters
+1 614 451 8330 ext.117
jwalters@deform.com
Jim Miller
+1 614 451 8330 ext. 108
jmiller@deform.com
127
Shanghai Fast-Fix Rivet Corp.
No. 1151, Lianxi Road
Shanghai, China 201204
Contact Person: Winter Wong
Tel: +86-21-58912860 • Fax: +86-21-589127936
Web Site: www.fastfix-rivet.com
E-Mail: info@rivet-china.com
MISSION STATMENT:
Provide professional blind fastening solutions to our customers,
with continuous innovation and
improvement. Maximize our
customers’ value by supplying
quality, on-time delivery and
expertise. Our target is to be the
preferred supplier of fastening
solutions to automobile industry
worldwide in the near future.
COMPANY INTRODUCTION:
History
has over 12 years experience
in production & export of blind
rivets. Nowadays, we are one
of the leading manufacturers of
blind rivets in China, supplying
over 4,000 different sizes rivets
per IFI standard, DIN7337 standard and ISO standard. We are
now ISO/TS16949 certified, as
OEM supplier for many European manufacturers.
Co., Ltd., producing open type
rivets, multi-grip type rivets and
structural rivets. Jingjiang FastFix Rivet Manufacture Co. Ltd,
producing sealed type rivets and
big sizes stainless steel rivets.
The total area is over 25,000
square meters, with annual production capability of around 2
billion pieces.
Service
We make sure that the quality of
each size and every lot is under
control, and conform to international standards & customer
specifications. We keep subsistent samples of every lot for at
least one year, to track the products in case of any problem.
HIGHLIGHT PRODUCTS:
• CUP-FIX rivets
R&D department consists of
highly skilled product designers
and professional technicians. On
average we require 5 to 7 weeks
to bring a new product to the
manufacturing stage. Due to our
ability to keep up with and anticipate changes in the industry,
we maintain our leading role in
the fastening field.
Diameter: 4.8mm, 6.4mm. Length:
10mm~20mm. Available with
Dome Head, Countersunk Head.
Material: Steel, Stainless Steel.
High shear strength and tensile
strength, with multi-grip capability. One CUP-FIX type can
work to replace several standard
grip fastener & simple the stock
control. It also have good hole
filling and sealing capability,
provide strong vibration resistant
joints with a visible lock. CUPFIX is ideal for applications like
automotive, Vehicles, Ventilating,
Ladders and Cabinets.
Capability
• Multi-grip rivets
We have two manufacturing
plants: Jiangsu Fast-Fix Fastener
Diameter: 3.2mm, 4.0mm, 4.8mm.
Length: 6mm~30mm. Available
Advantage
128 Fastener Technology International/August 2014 with Dome Head, Countersunk
Head, and Large Head. Material: Aluminum, Steel, Stainless
Steel. Wide grip range, ideal for
use in inconsistent holes, reduced
rivet inventory. Multi-grip type is
valuable where components are
supplied to the user with holes already punched or drilled or where
the sheets to be joined are folded
or curved, making it difficult to
match up two holes of the correct
size. Multi-Grip is ideal for applications like Automotive, Vehicles,
Ventilating and Electronics.
• HEM-FIX rivets
Diameter: 6.4mm. Length:
12mm~20mm. Available with
Dome Head. Material: Steel,
Stainless Steel. HEM-FIX has
superior shear strength and tensile
strength, especially suitable for
fastening thin sheet materials or
brittle material applications. After
setting, HEM-FIX provides strong
vibration resistant joints, with
mandrel tightly locked by splined
stem. Large blind side bearing
area against the rear sheet. HEMFIX is ideal for applications like
automotive, Vehicles, Ladders
and Cabinets.
SALES OFFICE:
No. 1151, Lianxi Road
Shanghai, China 201204
Contact Person: Winter Wong
Tel: +86-21-58912860
Fax: +86-21-589127936
Web Site: www.fastfix-rivet.com
E-Mail: info@rivet-china.com
SouthWind International
®
Joaquim Floriano, 466, Suite 201
04534-002 Sao Paulo-SP Brazil
Tel: +55 11 3165-9999 • Fax: +55 11 3079-8636
Web Site: www.southwind.com.br • E-Mail: swind@southwind.com.br
MISSION STATMENT:
Our mission is to be always available to supply the latest technology
machinery, equipments and tooling
for fasteners and cold formed parts
manufacturers, becoming the best
source for solutions to our Customers’ needs and expectations.
QUALITY POLICY:
Seeking always to meet the customers´ needs and requirements,
continuously improving our
Quality Management System on:
• Customer´s satisfaction;
• Quality Management System requirements;
• Team’s satisfaction.
COMPANY HISTORY:
SouthWind International was
founded in 1995 to operate all
over South American market,
working as a sales agent of foreign companies to supply fastener machines, auxiliary equipment, process monitors, sorting
machines, gages and a complete
range of fasteners tooling.
The company headquarter is located in Sao Paulo-Brazil, with
sales force covering the main
regions of fastener industry in
Brazil and Argentina. SouthWind had started importing and
distributing standard and special
heading and threading tools for
fastener manufacturing in 1997
and then quickly became recognized as high quality products
& service supplier in Brazil,
Argentina and Chile.
SouthWind is actually the only
source for the fastener industry
in South America that is able to
supply the complete line of ma-
chinery, equipments and tools for
the whole manufacturing process
of fasteners and cold formed
parts, through the wide range of
its represented companies, from
wire drawing, cold and hot forging, threading, process monitoring, inspection and sorting, up to
the packing of the final product.
SouthWind International keeps
the focus on the total customer
satisfaction and thanks to the
premium service and the unique
technical knowledge of its team,
it has assured to the company
a strong and constant growing
market share in Brazil and in
neighbor countries of South
America.
PTG-PRECISION TOOL GROUP: Thread rolling dies and trim dies.
REED MACHINERY: Thread rolling machines.
ROCKFORM: Tools for carbide machining and polishing.
TECNO IMPIANTI: Wire drawing machinery and auxiliary equipment.
UNIVERSAL PUNCH: Punches and gages.
VIDEX MACHINE ENGINEERING: Machines for wire straightening,
cutting, bending and threading.
WEIGHPACK INT’L: Packing equipment.
KEY PERSONNEL:
WRENTHAM TOOL John B. Graef
PRODUCTS: Managing Director
Torx® and recess punches
Marcia Tassinari
Adm. Finance Director
SouthWind International
Rua Joaquim Floriano, 466, Suite 201
Leandro Lopes Import Manager
04534-002 Sao Paulo-SP Brazil
PRODUCT LINES:
Tel: +55 11 3165-9999
Fax: +55 11 3079-8636
E-mail: swind@southwind.com.br
Website: www.southwind.com.br
Brazil’s and South America Sales
Agent and Distributor for:
AGIR: High-precision and complex tooling for cold forming process.
B&G MFG. COMPANY: Stud Master chamfering & stamping machine.
BRANKAMP: Load process
monitors.
CCM: Inspection and sorting equipment.
DAGAN INTERNATIONAL:
Screw/nut machinery and tooling.
NEDSCHROEF MACHINERY:
Cold and hot forming machines.
129
SPIROL INTERNATIONAL CORPORATION
30 Rock Avenue
Danielson, CT 06239-1434 USA
Tel: +1 800 321 4679 • Fax: +1 860 774 2048
E-Mail: info@spirol.com • Web Site: www.spirol.com
COMPANY HISTORY:
Since 1948, SPIROL has been a
manufacturer of engineered components used for joining and assembly.
Over time, their standard product
lines have grown to include more than
30,000 items; every one designed to
enhance product quality and reduce
the total cost of assembly.
SPIROL serves both the OEM and
distribution markets, and enables their
customers to purchase multiple product lines from a single manufacturing
source resulting in reduced transaction costs and increased efficiency.
PRODUCT OFFERED:
SPIROL has one of the most diverse
product offerings including:
• Coiled Spring Pins
• Slotted Spring Pins
• Solid Pins and Drive Studs
• Alignment Dowels
• Ground Hollow Dowels
• Dowel Bushings/Spring Dowels
• Spacers
• Rolled Tubular Components
• Compression Limiters
• Precision Shims and Thin Metal Stampings
• Hardened Thrust Washers
• Precision Machined Nuts
• Inserts for Plastics
There are no tooling or development charges or high purchase requirements for standard parts. All
products are offered in bulk or small
pack quantities to enable distributors
to receive – and ship out – product
without having to repackage.
SPIROL is the best choice for all
military standard Coiled Pins, Slotted Pins and Shims; all of which
meet the requirements for both
DFARS and RoHS.
GLOBAL SUPPORT:
SPIROL has Application Engineers
throughout the world to assist you
in your designs, supported by stateof-the-art manufacturing centers and
worldwide stocking facilities to simplify the logistics of delivering your
product. Customer Service teams are
located in the USA, Canada, Mexico,
Brazil, United Kingdom, France,
Spain, Germany, Czech Republic,
South Korea, and China. There are
no other manufacturers in the industry that have this global presence.
You can also find SPIROL products sold by Preferred Distributors
throughout the world. Scan this QR
Code for a complete list of SPIROL
Preferred Distributors or go to the
web address below.
http://www.spirol.com/company/contract/prefdist.php
Involve SPIROL early
in the design stage
of your next project!
• Disc Springs
• Pin Installation Equipment
• Insert Installation Equipment
130
CONTACT:
Email: info@spirol.com
Universal Punch Corp.
131
132
WAFIOS Umformtechnik GmbH
Im Rehsiepen 35
D-42369 Wuppertal
Phone: +49/202 / 4668 – 0
Fax: +49/202 / 4668 – 225
sales@wafios-umformtechnik.de
www.wafios-umformtechnik.de
COMPANY PROFILE:
Precision, Innovation, Integration
WAFIOS Umformtechnik GmbH is
among the leading manufacturers of innovative machine technology and tools
for cold, warm and hot forming.
The focal point of our product portfolio
are cold formers for the production of
high quality fasteners made of steel
wire, stainless steel, high alloy, and
exotic materials.
Furthermore, our integrated solutions
are completed with secondary operation
machines, long life quality tools and our
comprehensive service.
Traditional Brands
WAFIOS has been building machines
for the fastener industry for over 90
years, applying our experience using
cutting edge technology for the benefit of our customers. Our competent
employees constantly come up with
machine solutions which will strengthen
your competitive advantage on a sustainable basis.
The foundations of the company in
Wuppertal were built on the traditions
of the brothers Carl, Emil and Wilhelm
Hilgeland.
We continue to market the HILGELAND brand, over the years the company became stronger through mergers
and acquisitions of well known and
successful companies, such as KIESERLING, HILGELAND, NUTAP, MRP.
We have bundled our technology and
our Know-How for our customers. Everything is available under one roof at
WAFIOS Umformtechnik.
CUTTING-EDGE PROGRAM:
We offer the optimal solutions for
your systems. Our product range from
single-stroke-, double-stroke- and
multi station headers to thread rolling
machines, pointing and nut tapping
machines.
from 50 years of international service
experience.
KIESERLING and HILGELAND
formers which are equipped with
optional induction heating system are
used for the production of fasteners
made from high alloys for applications
in the aerospace industry.
WAFIOS Umformtechnik is among
the leading manufacturers of innovative machine technology and tools
for cold, warm and hot forming. Our
experience in tool-engineering is for
your advantage. Tools designed by
WAFIOS are optimized for your products and production process with high
performance, precision and economic
efficiency. The Result: Using ToolEngineering from WAFIOS Umformtechnik will expand your advantage of
productivity and quality against your
competition.
Our tooling – especially our thread
rolling dies for the production of fasteners have unique characteristics and
are used world wide, they are a bench
mark in the tooling business.
SERVICE:
Knowledge Beats Guesswork
As the manufacturer of your machines,
our service experts at WAFIOS Umformtechnik know them inside out. This
knowledge, the latest know-how and
decades of process experience are the
foundations of our services. You will
benefit from our substantial knowledge as producers. Take advantage of
our nearly 100 years of expertise in
machine and plant construction and
Overview of Our Services for You
•Worldwide service from qualified
technicians.
•Rebuilt/repair of machine element.
•1000 hours service after start-up.
•Retrofit or modernization of safety
equipment.
•Change over of complete electronic
control panel (example Siemens
S5 to S7).
•Inspection and maintenance contracts at fixed prices.
•Spare parts service for all types
of constructed machines delivered by courier and parcel service,
or available for pick up.
•Spare parts for current machines
available from stock.
•Extensive spare parts stock for older
generations of machines.
•Components and parts made from
original drawings for all series.
•Development of plans and implementation stages in tooling drawings.
•Optimization of existing processes.
•Training of your operators and
maintenance employees.
•Telephone service.
•Online support for electronic problems.
•Installation of software updates.
•24 hours availability/7 days a week.
•Remanufacturing and upgrading.
AGENT FOR NORTH
AMERICA & CANADA:
BW Walden Group
Phone +1 905 482 2659
Fax +1 905 482 2663
sales@bwgroupinc.com
www.bwgroupinc.com
August 2014/Fastener Technology International 133
ZHEJIANG QIFENG HARDWARE MAKE CO., LTD.
HAITANG INDUSTRIAL ZONE, XITANGQIAO TOWN, HAIYAN
ZHEJIANG, CHINA 314300
Tel:+86-573-86851438/456/466
Fax:+86-573-86851478 Contact: Mr.Cai
E-mail: sales@qfwj.com Website: www.qfwj.com
COMPANY HISTORY:
In 2001, Haiyan Qifeng
Hardware Make Co., Ltd. was
set up, with annual turnover of
RMB1,000,000.
In 2003, a new plant of some
3000 m2 was founded at Haitang
Industrial Zone, with annual
turnover RMB7,000,000.
In 2008, Zhejiang Hi-Tek Railway Fastening Systems Co., Ltd.
was established by China National
Center for Quality Supervision and
Test of Standard Parts and Qifeng
Hardware.
In Oct. of the year, Hi-Tek’s
railway spike is successfully used
in the construction of national key
projects—Wuhan-Guangzhou
high-speed railway passenger line,
annual turnover RMB80,000,000.
In 2011, Qifeng is the main
supplier of railway spike for
Lanzhou-Xinjiang High-Speed
AS9100 + ISO9001
134
railway line, a new plant with
13450 m2 is completed,our turnover is RMB120,000,000.
In 2012, starting to produce aerospace precision products in new plant, and passed
GJB9001B-2009, CNAC,
AS9100B-2004 and the third
level secrecy qualification for
research and production unit
for National Defense Weapon
Equipment.
In 2013, six multistage Cold
Forging Lines and two Heat Treatment Lines are in mass production.
We had passed AS9100C-2009
Quality system and license of
scientific research and production
for weaponry and equipment, get
ISO14001 and TS16949 certificate.
PRODUCT RANGE:
• Aerospace precision fasteners:
Titanium Alloy Series,Hydraulic
Pressure Parts, Alloy steel bolt for
high temperature service, Lock
bolt and nut, selflock nut, hi-lock
nuts, etc.
• Railway screw spikes: widely
used at the construction of JINGHU, WUGUANG, LANXIN
and JINGHU hi-speed railway in
China.
• Sleeper screws. railway parts,
track bolt, T-bolt, fish bolts.
• Standard Fasteners: Anchor
Bolt, Carriage Bolt, Hex Lag
Screw, Hex Head Bolt and Screw,
Square Head Bolt & Eye Bolts,
Hot Forge Parts, Welded Parts.
• Non-standard products, Diameter M6-M64, Max length
2000 mm.
In 2014, HDG, Zinc Plated,
Cadmium Plating line come into
Stamping parts.
service.
CNAS
GJB 9001B-2009
329 Rayette Rd, Unit 13/14, Concord, ON L4K 2G1, Canada
Telephone: Int.+ (905) 761-6165 Fax: Int.+ (905) 761-6168
sales@lesmoamerica.com • www.lesmoamerica.com
Tramev - wire, rod & cable cutters
Mission Statement:
Cometo – wire straightening, guiding &
feeding Equipment
Our mission is built on integrity and uses mutually
beneficial relationships, quality products and quality Cometo snc, located in Annone Brianza, Italy, since it’s
people to achieve our goals. Lesmo Machinery Amer- inception in 1983 with it’s goal to improve product
ica offers the most efficient & productive manufacturing quality, incorporates the most advanced technology
technologies from world leader manufacturers - these together with experience gained from it’s customers.
companies drive their businesses by being at the
leading edge of technology. The principals represented endeavor to continually develop innovative and
original products of the highest quality.
With our range of light and portable tools to shear, cutoff, bend and even straighten is now a very simple
operation. Tramev CUTTING TOOLS offer a full range
of portable tooling for shearing, cutting, straightening
and bending of metal wire, rod, strip, cable, bar, metal
banding and also the punching of metal plate. Units are
battery operated, electrically powered or electro–
hydraulically powered. This range of tooling allows
fast and effective solutions to the problems related to
wire, cable, strand, rod, bar and bolts & nuts for quick
A Appiani - steel shipping & process reels
Cometo Wire Handling Products include:
Wire and efficient cuts with maximum operators’ safety.
Appiani manufacture standard and custom build steel Straighteners (single, dual & multi-plane models), Wire
reels according to DIN specifications or to customer Guides – various types, Rotating Die Units - Traversing
requirements. A world leading manufacturer of ship- units – electronic and mechanical, Feeders – for wire,
ping and process reels since 1962, offering:
metal strip and tube with mechanical, hydraulic and
pneumatic roller adjustment - Automatic wire straight- Steel reels for wiredrawing
www.tramev.com
ening for wire bending and forming machinery and also
- Reels for bunching & stranding
for the elongation in the processing of concrete con- Lesmo Machinery America, Inc.
- Cable reels and drums
struction materials (rebar), Straightening and Wire
- Fully machined steel reels
Lesmo Machinery America has been formed to service
Guide Rollers (Replacement Rollers).
- Spools for steel cord, hose wire, saw wire
the needs of the wire and cable industry with a busiand special fine wire—all B-type spools
ness policy to maintain relationships with our customwww.cometo-italy.com
- Finned Flanged, corrugated steel reels
ers based on complete mutual trust. We aim to provide
- Collapsible, take apart reels
our customers an added value through improving their
- Plastic & Steel composite reels - ABS
productivity, quality and profit.
www.appianigroup.com
www.lesmoamerica.com
Delivering the world of fasteners to...
Manufacturers • Distributors • End Users
...in over 90 countries, print & digital editions, six times/year
SKM12
4.0 – 12.0
16
10 – 220
20.0
10,000
250
3,200
Fastener
Focus
Focused News, Information and Products for
Fastener Distributors, Importers, Manufacturer’s
Representatives, OEMs and End Users.
In this issue...
Automatic Pointer SKM 3
•“FastenerDistributor Index(FDI)”Column
•AsianNewsReport
•BenefitsofUsingMetric
FastenersOverImperial
Presented by...
•NewProducts
WWW.FASTENERTECH.COM
www.fastenertech.com
In this issue...
LOCTITe®
204 dri-Loc
Internal Threads
• Immediate quotes
• Competitive pricing
• Computerized order acknowledgement
• Delivery promises kept
• Compliance with IFI
and most industry specs
BrAdLeY
Standard
White
Nylon Patch
3M™ SCOTChGrIP™
2353 Blue
Solvent Based
Adhesive
•SpecifyingMetal CurtainWallFasteners
•“TrackingYour Fasteners”Column
Fastener
Focus
Bradley Pre-Applies The
Way You Like It...
Perfectly and Promptly!
Bradley’s fast turnaround, state-of-the-art
pre-application operations provide the
service you require, including:
•60YearsofBlindRivet
NutInnovation
•NCFANightattheBallpark
“Straight From
The Show”
Report from
Germany...50-61
August 2014
CASTING
IMPreGNATION
Porosity Sealing
THE
BRADLEY
GROUP
OF COMPANIES
1-800-201-7381
New “Technology
Center” @
ncfa’s 6th annual
Distributor social...P. 94-97
Page 22
Fastener
Focus
June 2014
Presented by...
Hit the Mark with
Accuracy and Precision
•MWFAFastenerExpo& GolfOutingPreview
•DistributorSocial& Business Event Expands
•AutomotiveFastener Roundup
•ReviewofNCFA DistributorSocial
•AsianNewsReport
•SPIROLHosts
NEFDAMembers
April 2014
Presented by...
In this issue...
When precise positioning matters, Automotive Spring Pins
from VFS are right on target. Call 800-526-2376
See our ad on page 106.
•AsianNewsReport
•RetainingRings
Roundup
Vol. XXXVII, No. 2
•StraightFromTheShow
Report:MWFAFastener
Expo&GolfOuting
PREVIEW...P. 108-116
Automotive Fasteners...120
P. 147
Vol. XXXVII, No. 3
Vol. XXXVII, No. 4
Uniting the USA Fastener
Industry:...P. 40 & 163
SECONDARY OPERATIONS...82
STRAIGHT FROM THE
SHOW REPORTS...
PAGES 70 & 176
*) The output depends on material and product.
Retaining Rings...98
•High-SpeedOptical
InspectionTechnology
•ProprietaryLocking SystemHeads FastenerOfferings
Cold Forming...52
P. 75
SKM 08
2.0 – 10.0
12
10 – 180
20.0
12,000
300
3,200
P. 87
mm
mm
mm
mm
min.–1
max. pcs/min.*
approx. kg
Thread Rolling...66
Serving Manufacturers,
Manufacturers, Distributors
Distributors and
and End
End Users
Users
Serving
SCREW MACHINES...P. 30-39
FASTENER TEchNoLogY INTERNATIoNAL
SIMULATION..P. 42-55
Technical Data
Shank diameter
Max. diameter to pass feed rails
Shaft length
Max. spindle traverse
Spindle speed variable
Output
Machine weight
FASTENER TEchNoLogY INTERNATIoNAL
FASTENER TEchNoloGy INTERNATIoNAl
COMPANY PROFILES...97
MATERIALS...82
Automatic Pointer SKM
Type HILGELAND
SORTING & INSPECTING...P. 34-43
APRIL/MAY 2014
2014
APRIL/MAY
APRIL/MAY 2014
• Feeding...58
• Rebuilding &
Upgrading...88
JUNE/JULY 2014
AUGUST/SEPTEMBER 2014
Roundup Articles:
JUNE/JULY 2014
2014
JUNE/JULY
Distributors and
and End
End Users
Users
Serving
AUGUST/SEPTEMBER 2014
2014
AUGUST/SEPTEMBER
Distributors and
and End
End Users
Users
Serving
Visit www.fastenertech.com to start or renew your
free subscription, print and/or digital edition,
and to learn more about the fastener industry.
Advanced Poly-Packaging, Inc
1331 Emmitt Road
Akron, OH 44306 USA
Tel: 800.754.4403 / 330.785.4000 / +44 01452 854485
Email: sales@advancedpoly.com
Website: www.advancedpoly.com
COMPANY HISTORY:
Welcome to Advanced Poly-Packaging! Our
company was founded in 1979 by Tony Baker
and remains family-owned. Headquartered in
Akron, OH, Advanced Poly-Packaging has a
satellite office in England; inside and outside
sales professionals; and distributors in the
United States, United Kingdom, Canada and
Denmark. All of our products are made in
the USA.
Buying a machine off a shelf is rarely the answer. Packagers know that it takes ingenuity
and patience to engineer the right solution.
In fact, most of the solutions we provide
involve a degree of customization to match
your application.
PRODUCT LINES:
What do you bag? Washers, cotter pins or
wheel nuts? How about machine screws, rivets
or lock nuts? Anchors, flange bolts or drywall
nails? Those represent only a fraction of the
fastener products that are being packaged in
Advanced Poly-Bags™ with the company’s
bagging machines.
Our line of tabletop baggers prove that size
really does not matter. These machines are
loaded with features, including a built-in inline
thermal transfer printer on the T-375, featuring
“Next Bag Out” technology that virtually eliminates mislabeled bags. The tabletop models
are usually best for smaller quantities. Larger
amounts may require a production bagger, such
as the T-1000 Advanced Poly-Bagger™. The
T-1000 is fast, versatile, rugged and cost effective. It can be the central component of a kit
packaging system, for example. Some fastener
manufacturers need one of our vibratory parts
counters, a net-weigh scale or a check-weigh
scale (we recently developed one system that
contains all three!) in addition to infeed or
takeaway conveyors.
Custom bags are our specialty: Printed or
non-printed; special features such as vent, hang
or pin holes; headers; perforations, etc. We
also have dozens of stock sizes of Advanced
Poly-Bags™, ready for shipment almost
immediately. Many fastener packagers are
interested in some of our specialty films for bag
production, including high strength, tinted and
100% degradable. Advanced Poly-Packaging
also offers blanket pricing to enjoy locked in
pricing and a flexible shipping schedule to they
never run out of bags.
Sales Office:
Advanced Poly-Packaging, Inc.
1331 Emmitt Road, Akron, OH 44306
Tel: 800.754.4403 / 330.785.4000 / +44 01452 854485
Email: sales@advancedpoly.com
Website: www.advancedpoly.com
BERARDI BULLONERIE SRL
Via della Concia, 10
Z.I., Poggio Piccolo
40023 Castel Guelfo (BO) Italy
Tel: +39 0542 671911 • Fax: +39 0542 671940
Email: info@gberardi.com • Website: www.gberardi.com
COMPANY PROFILE:
Berardi Bullonerie is one of the first companies
present in this sector that has obtained in 1995 the
Certification ISO9002 and in May 2002 adjusted
its own Quality System according to the normative
UNI EN ISO 9001.
Thanks to the wide range of products, to the punctuality and timeliness in responding to the customers’
requests, Berardi Bullonerie distributes its products
to several types of customers all over the national territory and from different technologies of commerce.
The guiding concept in this activity is the reaching
of the highest efficiency level in order to grant to the
customer rapid and efficient service and supply of
metallic small parts.
A modern warehouse organization supported by specific software and based on radio frequency systems,
the transport network and a team of persons dedicated
to customer care, make of Berardi Bullonerie a reliable and precious partner.
COMPANY HISTORY:
Berardi Bullonerie is a company that is a distributor
of screws, bolts and fasteners. It distinguishes itself
for the elevated quality of the service offered to its
customers. This activity started in 1919 with a small
shop located in Piazza Maggiore (square) in Bologna.
In 1960 the shop became a distributor company and
moved its own activity into a large fully equipped
warehouse.
In 1984, it moved to a 4500 m2 warehouse, from
which it stocked approximately 15 thousand items.
This was the year that marked Berardi’s growth,
becoming one of the largest Italian distribution
companies of bolts and nuts.
136
In January 2003, Berardi Bullonerie moved to its
current facility in Castel Guelfo, which includes a
half-automatic warehouse of 6200 spm, 35,000 items
present in stock (70,000 items registered) and more
than 400,000 lines/year dispatched.
ORGANIZATION:
The competence of the company’s employees and the
logistic organization drive the added value offered to
customers by Berardi Bullonerie.
To reach important goals such as the quality of
the products, the characterization of the offer, the
lowering of the logistic chain costs, technical innovation, flexibility and timeliness of replies, Berardi
Bullonerie can count on an important organization:
The company maintains 11 branches, each with a
warehouse containing thousands of items in stock,
on the whole national territory and computationally
linked with the headquarters in real time.
A group o 45 external commercial cooperators all
over Italy assists customers during and after sales. A
team of 15 internal persons provides customer care.
A technical staff composed of five people is available
to customers for dealing with all technical matters.
A purchasing department composed of four people
uses modern techniques of marketing and purchasing
to ensure efficiency in the choice and qualification of
suppliers and in the planning of the turnover of the
items in stock, in terms of quality/price.
A quality assurance office supports the purchasing
department in qualifying suppliers to ensure that
the product in stock conforms to what is requested.
PRODUCTS:
Berardi Bullonerie Srl provides its customers with
a broad variety of special fastener products includ-
ing screws, bolts, washers, spacers retainers and
other items. These special products are manufactured
based on customer drawings.
Berardi Bullonerie Srl also offers a variety of security
fasteners and captive screws.
Another strong point is the cooperation agreements
Berardi has undertaken over the past 3 years, with
production companies, each of which is a leader in
its field, Lee Spring, which Berardi is only authorized dealer for Italy and other European and North
Africa countries , for the springs; Clamp for cable;
Nordlock for washers and lock nuts; Stater for
knobs and flyers and Miselli for what concerns the
hydraulic accessories
LOGISTIC SERVICES:
In recent years, the most significant growth occurred
through the development of management systems
to supply rapid customer inventory through kanban
logic, which allows the customer to be able to forget about having to manage the purchase of all the
small metal parts, and any another article listed as
class C, being able to devote precious and expensive
internal human resources to activities with higher
added value.
Berardi ended 2013 with more than 100 integrated
logistics services in assets, an increase of over 10%
over the previous year.
SALES OFFICE:
Berardi Bullonerie Srl
Via della Concia, 10
Z.I., Poggio Piccolo, 40023 Castel Guelfo (BO) Italy
Tel: +39 0542 671911 • Fax: +39 0542 671940
info@gberardi.com • www.gberardi.com
Can-Eng Furnaces
International Limited
P.O. Box 235
Niagara Falls, NY 14302-0235
Tel: +1 905 356 1327 • Fax: +1 905 356 1817
E-Mail: furnaces@can-eng.com
Web Site: www.can-eng.com
COMPANY PROFILE:
Established in 1964, CAN-ENG Furnaces International Limited is a leading designer and
manufacturer of thermal processing equipment for ferrous and non-ferrous metals.
CAN-ENG’s rugged furnace designs have
served commercial and captive heat treaters, stamping and fastener manufacturers,
automotive component producers, the iron
and steel industries, aluminum foundries,
agricultural, construction and appliance
manufacturers for 50 years and CAN-ENG
has gained an international reputation for
design innovation, quality workmanship and
a dedication to service.
CAN-ENG is the industry leader for the
supply of Continuous Mesh Belt Atmosphere
Furnace Systems. Much of this can be attributed to design innovation which changed the
industry and continues today. CAN-ENG’s
equipment leads the industry in up-time reli-
ability, energy efficiency and soft handling
features that deliver superior part cosmetics.
Standard production capacities are available
from 250 lbs/hr up to the largest systems in
operation at over 7500 lbs/hr (100 kgs/hr to
3400 kgs/hr).
CAN-ENG systems are usually supplied as
totally automated heat treating lines which
include computer controlled loading systems, pre-was stations, hardening furnaces,
quench systems, post washer stations and
tempering furnaces. Auxiliary equipment
such as dephosphating systems, blackening
systems, atmosphere generators and systems
offering full SCADA capabilities are also
available to complete the system automation.
CAN-ENG’s SCADA system is designed
especially for the heat treating industry. It
addresses specific needs regarding production efficiency and process quality in heat
treat operations and can be included in a
CAN-ENG furnace installation or added to
others’ equipment.
CAN-ENG has developed a new Energy
Recovery System (ERS™) for its Continuous Mesh Belt Furnace Systems. The new
ERS™ reduces atmosphere consumption,
natural gas consumption and carbon emissions and delivers faster part heat up.
CAN-ENG Furnaces has the depth of experience to custom engineer heat treating equipment for the most demanding applications.
CAN-ENG Furnaces is an ISO 9001:2008
certified company.
To LEARN MORE:
For more information regarding CANENG
equipment, contact Tim Donofrio by
telephone at 905-356-1327 or email him at
tdonofrio@can-eng.com.
CINCO INDUSTRIES, INC.
14N507 Timber Ridge Dr.
Elgin, IL 60124 USA
Tel: +1 847 741 4400
Fax: +1 847 741 4407
MISSION STATEMENT:
Cinco Industries has been serving the Fastener
Industry since 1972 with a commitment to providing our customers with the best machinery
lines in the world and detailed attention to customer service. We have strived to be able to meet
all of our customer’s equipment needs from New
and Used machinery, as well as parts and material handling. We sell primary and secondary
equipment for all types of fastener production
as well as Vision Inspection Equipment.
PRODUCT LINES:
Saspi High Speed Thread Rollers - Saspi
offers a complete line of High Speed Flat Die
Thread rollers from #0 Size to #70 as well as a
line of Rotary Thread Rollers through 12mm
Diameter. All machines can be supplied with
single and double washer assembly units.
Saspi High Speed Shave Pointers - Saspi
builds the finest line of High Speed Shave
pointers capable of pointing parts from 2 mm
Diameter up to 35 mm at speeds up to 250 Parts
Per Minute. All equipped with touch screen
controls to change speeds and raise and lower
feed rails, spindle and vibratory feeder.
Hyodong Bolt and Nut Formers - Cinco Industries has teamed up with BW Walden Group
to bring the high quality Hyodong Cold Forming
line to North America. Hyodong has been building machinery for 25 years to meet the needs of
it’s global customers.
The HBF series ranges from 8mm to 42mm
cut off diameter up to 480 mm in length.
These machines are available in 3 ,4, and 5 die
configurations.
The Bolt Part Former, HBP series: Ranges from
11mm to 50 mm diameter cut off with lengths
up to 450 mm. These machines are available
in 5, 6 , and 7 die configuration..
The Nut Part Former NPH series ranges from
11mm to 50 mm Nut size up to 210mm in
length. These machines are available in 5 and
6 die configuration.
The Nut Former HNF series ranges in sizes
from 6mm to 27 mm cut off diameter. These
machines are available in 5 die configuration.
Accuvision Vision Inspection Systems
Cinco has developed a reputation for the ability
to recommend and consult on all your quality
inspection needs. With 20 plus years in the
sorting and quality inspection of fasteners, nuts
and parts, we have strived to represent some of
the best inspection machinery in the world. It
is for this reason that we have been proud to
introduce Accuvision Inspection Equipment to
North American.
Accuvision offers two types of inspection
machines. The steel dial 1605 for high speed
inspection of headed parts and the glass dial
1604 for nuts, inserts and many headed parts.
Accuvision can offer multiple camera options
at a very competitive price.
Used Machinery
Cinco Industries has been a leading supplier
of used machinery in the fastener industry for
over 40 years. We have numerous contacts
throughout the world and we are able to supply all your used machinery needs
Accessories
From Small parts conveyors for moving parts
from one operation to another to Conveyors
built to your specifications, Cinco Industries
can meet all your material Handling needs
along with Feeder bowls, Chip Separators
and oil Cleaners.
CONTACT US:
sales@cinco-ind.com
Website: www.cinco-ind.com
Phone: +1 847 741 4400
Fax: +1 847 741 4407
137
Larry McLaughlin – President/CEO
Tony Gross – Sales Manager
of
2008
Larry Borowski – President/COO
ms
n.
ortunately
KEY PERSONNEL:
wire 2008, Düsseldorf, Germany
Vice President: Frederick A. Schultz
Technical Manager USA: Albert J. Gelles
Technical Specialist: Ron Strong
March 31 – April 4, 2008
www.mdna.com
KEY PERSONNEL:
www.wire.de
May 20 – 21, 2008
National Industrial Fastener Show/East
Dörken coatings are accepted by OEMs
worldwide and all products are REACH and
RoHs compliant.
Dörken products may be applied utilizing dip-spin, dip drain or spray techniques
depending on part geometry. Product development and manufacturing are certified in
accordance with DIN EN ISO 9001 standards.
Production is certified under ISO14001:2004.
2234 Wenneca Avenue
Fort Worth, Texas 76102 USA
Tel: +1 817 870 8888, Fax: +1 817 870 9199 • +1 800 435 2657
E-Mail: sales@greensladeandcompany.com
Web Site: www.greensladeandcompany.com
138
acture and
protection
ystems
lake
variety
(NIFS/EAST)
DELTACOLL® Series—Inorganic topcoat system for electroplated zinc and zinc alloys with suitable passivation, stainless steel,
aluminum and its alloys with a passivation
and magnesium with a passivation.
DELTA®-SEAL Series—Organic topcoat systems engineered for compatibility
with zinc-flake systems, electroplating systems, mechanical zinc, steel with a suitable
passivation, aluminum and its alloys with a
passivation, stainless steel and zinc die cast.
www.fastenershows.com
DELTA®-TONE Series—Inorganic
zinc-flake basecoat system suitable for steel,
steel with a suitable passivation, iron and
steel castings.
Columbus, OH, USA
www.mdna.com
DELTA-PROTEKT® Series—Inorganic basecoat and topcoat systems, including the KL 100 Series—inorganic basecoat
suitable for steel, steel with a suitable passivation, iron and steel castings. The VH 300
Series—specially designed as a topcoat for
zinc-flake systems. The VH 350 Series—
topcoat for electroplated zinc and zinc alloys
with a suitable passivation, stainless steel,
aluminum and its alloys with a passivation
and magnesium with a passivation.
wire China 2008
PRODUCT LINES:
Shanghai, China
As specialists in multifunctional micro-layer corrosion protection systems, Dörken-MKS
develops and manufactures extremely effective
surface protection coatings for the automotive
industry as well as others. The company works
with a world-class and worldwide licensee
network on all matters concerning applications.
Whether it’s a new part, a specification, application technology, parameter adaptation or
equipment design, Dörken provides first-class
solutions to its customer problems.
Our certified quality and environmental
management system ensures consistent development and production according to current
standards.
The company’s micro layer corrosion
protection systems, trademarked under the
name DELTA-MKS®, offer a complete line
of engineered coatings developed to provide
the fastener industry with the optimum performance in corrosion protection, consistent
torque/tension values and resistance to chemical attack.
September 23 – 26, 2008
Grass Lake, MI 49240-9622 USA
Tel: +1 517 522 4600 • Fax: +1 517 522 8008
Web Site: www.doerken-mks.com • E-Mail: fschultz@doerkenusa.com
ats for zinc
o learn
products
734.327.4188.
say. Easy to apply.
P.O. Box 429 • 11200 Cedar Knoll Drive
4/18/07 10:07:18 AM
Doerken Corporation
Hanger Bolt & Stud Company
165 W. New Road
Greenfield, IN 46140 USA
Tel: +1 800 537 7925 • +1 317 462 4477
Fax: +1 800 994 2658 • +1 317 467 6189
E-Mail: sales@hangerbolt.com
Web Site: www.hangerbolt.com MISSION STATEMENT:
“To service our customers’ fastener and machinery needs at a level of excellence that
exceeds their expectations.” It’s more than just
a bunch of words! It’s been the essence of our
business for over 30 years of consistent growth.
COMPANY HISTORY:
Hanger Bolt & Stud Co. was started in 1967 by
L.D. Enterkin. The original operation consisted
of a single threader in a cramped one-car garage
in Indianapolis, Indiana.
By 1977, continued growth had forced the company into its third building in 10 years. Shortly
after this move, both the machine division and
our wire drawing operation were started. Also
by this time, the second generation of Enterkins
had assumed management. In 1987, the company purchased 5 acres in Greenfield, Indiana
(15 miles east of Indianapolis) and constructed
MADE IN THE USA!
a new facility. Increased production requirements soon led to an expansion of this facility.
Today, our headless fasteners can be found in
nearly every home in America.
PRODUCT LINES:
Hanger Bolt & Stud is a manufacturer of
roll-formed headless fasteners for a variety of
industries. Our machinery division designs and
builds a full line of production systems for the
installation of our fasteners in wood and plastic
components such as furniture legs. The wire
drawing department supplies material for our
own fastener production as well as other users
of steel, brass, aluminum and stainless wire.
Products include:
• Hanger Bolts, Fully Threaded & Plain
Center
• Stainless Steel Hanger Bolts
• Dowel Screws
• Bed Pins
• Rail Bolts
• Fully Threaded Studs
• Double End Studs
• Single End Studs
• Headless Lags
Our 54,000 ft2 facility in Greenfield, IN, USA,
has a capacity of more than one million fasteners per day.
BUSINESS & MANUFACTURING:
Hanger Bolt & Stud Company
165 W. New Rd., Greenfield, IN 46140
Toll-Free Tel: +1 800 537 7925
Toll-Free Fax: +1 800 994 2658
Tel: +1 317 462 4477
Fax: +1 317 467 6189
E-Mail: sales@hangerbolt.com
Web Site: www.hangerbolt.com
J&M Plating, Inc.
4500 Kishwaukee St.
Rockford, IL 61109 USA
Tel: +1 815 964 4975
Email: sales@jmplating.com
Website: jmplating.com
COMPANY PROFILE:
J&M Plating, Inc. provides the fastener industry with the best solutions
from a single source for heat treating,
coating, plating and sorting product.
The company serves manufacturers
and distributors in the fastener and
small stamping market places from its
180,000 ft2 facility. J&M also maintains
a six tractor-trailer trucking fleet.
J&M Plating provides Dörken
MKS ® dip-spin coating systems including RoHS/ELV-compliant Delta®Protekt, Delta®-Tone, Delta®-Seal and
Deltacoll® systems.
Also offered are ZinKlad™ zinc
electroplating coating systems includ-
ing RoHS/ELV-compliant Zinklad™
250 (Ford S437; GMW3044) and
ZinKlad™ 96 systems.
SERVICES OFFERED:
QUALITY:
J&M Plating is an ISO 9001:2008
certified and ISO 17025:2005 certified
facility.
• Heat Treating—case hardening and neutral hardening.
• Zinc Electroplating—trivalent
chromates; sealers and lubricants;
green,blue, red, yellow dyes; and baking for hydrogen relief.
• Dip-Spin Coating—
high-performance, automotive and industrial.
• Sorting—machine vision, hand
sorting, fastener packaging
and labeling.
COMPANY PROFILE:
J&M Plating, Inc.
4500 Kishwaukee St.
Rockford, IL 61109 USA
Tel: +1 815 964 4975
Email: sales@jmplating.com
Website: jmplating.com
139
KALT MANUFACTURING
THE MARK OF EXCELLENCE
36700 Sugar Ridge Road
North Ridgeville, OH 44039 USA
Tel: +1 440-327-2102 • Fax: +1 440-327-6171
Web Site: www.kaltmfg.com • Email: info@kaltmfg.com
COMPANY HISTORY:
Established in 1967, Kalt Manufacturing
has grown into a 60,000 Sq. Ft. Rebuilding and
Precision Machining Facility with 60 employees.
Located 20 miles west of Cleveland, Ohio, we
offer a full list of services to customers in the cold
forming industry worldwide.
Our 47+ year history coupled with our experienced staff provides us with the highest quality
reputation second to none when it comes to rebuilding cold forming equipment. Complete rebuilding of all types of Cold Forming Equipment,
Repairs, Mechanical, Electrical, and Lubrication
Upgrades, 24 hour Breakdown Service, our own
in-house Machining and Engineering Services
for Spare and Replacement OEM parts gives
our customers the edge to compete in today’s
global market.
Kalt Manufacturing continues to achieve the
best results and high customer satisfaction as we
continue to upgrade and expand our Rebuilding,
Machining and Engineering Capabilities.
ers, Thread Rollers
• Over 650 complete machine rebuilds under
our belts
• Complete Lubrication and Electrical upgrades/
replacement
• OSHA Upgrades
• 24 Hr. breakdown & spare parts services-your
plant or ours
• Spare Parts-Manufactured to our drawings, or
reverse engineering of broken/worn parts
• Over 12,800 engineered drawings on file, including cams, gears, crank shafts, die blocks,
transfers, bolsters, punch holders, punch rockers, wedges, etc.
• Complete in house precision machining of all
components including frames, slides, pitmans,
crank shafts, main bearings, etc.
• Up to 30 ton crane capacity in house
Engineering:
• Design of OEM replacement parts/assemblies for fastener equipment from casting to
machining
• Engineered upgrades-TKO Systems, Transfers,
Hydraulic & Pneumatic enhancements; feed
roll/straightener pressure, KO locking nuts,
transfer clamping, servo motor infeed
• Prototype tooling, design & manufacture
• Machine design & build
Rehabilitation:
• Complete rebuilding services-all Cold Forming Fastener Equipment including National,
Waterbury, Hartfords, 1/8"-1-1/2"
• Cold Headers, Roller Headers, Nut Formers,
Bolt Makers, Parts Formers, Progressive Head-
• Special design projects
• Complete IT systems for transfer of drawings,
information and data storage
Precision Machining:
• (12) CNC G & L/DeVlieg Boring Mills (up to 165")
• Small & large Manual & CNC Turning up
to 45"
• CNC/Manual Vertical Machining Centers
• 22" x 144" OD Grinding
• Surface Grinding
• Wire EDM
• Temperature-controlled 60,000 ft2 Facility
Quality Control:
• Utilizing Integrated Quality Systems Software
• CMM Inspection (56" x 74" x 204")
• Environmentally Controlled Metrology Lab
• Quality Assurance Program
• HP Laser Measurement Certificationers make
them powerful and long-lasting.
Our engineering and machining capabilities
provide us all the support we need to machine and
manufacture parts for our rebuilds, and spare parts
for our customer so that we, and our customers, do
not have to rely on anyone else (like the OEMs)
for these services. Visit us at the website below.
www.kaltmfg.com
MAJOR INDUSTRIES LTD.
http://majorindustriesltd.com
COMPANY PROFILE:
Major Industries is a manufacturer and
distributor of cold and hot forming tooling
with an international reputation for quality,
service, reliability and on-time delivery.
We have been established since 1983 when
early, notable success with our “Mil-Tip”
carbide-tipped piercing punches confirmed
us as a progressive factor in the world
PRODUCT LINES:
We supply tools across the board for forming
machines such as:
• Trim Dies
us to find the best performance characteristic of
• Inserts
• Sleeves/Holders/Fillers
worked diligently to establish a prominent
• Customized tooling
and so on…..
in the U.S.A., Canada, Germany, U.K., Italy,
Japan and Taiwan. (Please visit our website)
140
gree of flexibility in the selection of materials
and coatings to suit their particular require-
market. In the ensuing 30 years we have
industry through a network of sales offices
We can also offer our customers a greater de-
• Punches/ Dies
• Machine Parts/ Transfer fingers
and well-respected position within our
CAPABILITIES:
ments. The Mil-60 family of tool steels enables
the particular application, whether it is abrasion
resistance, toughness crack resistance or hardness, while the appropriate P.V.D surface coating ensures greatest longevity. Major Industries’
heat treatment and coating processes are performed in-house, allowing much closer control
over end product than can be achieved by others
in the business and our ISO 9001 certification
reinforces the level of confidence experienced
by our customers in the tools which leave our
factory for destinations around the globe.
Micro Products Company
1886 E. Fabyan Parkway
Batavia, IL 60510 USA
Tel: +1 630 406 9550 • Email: info@micro-weld.com
New Expanded Web Site: www.micro-weld.com
MISSION STATEMENT:
Micro Products Company has a global presence in the fastener industry. The company is
committed to providing the fastener and wire &
cable industries with a wide variety of electric
resistance butt and flash welders for continuous
processing of wire, rod and cable.
COMPANY HISTORY:
Micro Products Company was founded in 1928
in Chicago, Illinois. The corporate headquarters is located in Batavia, in the Chicago area,
and the manufacturing plant in Peoria, Illinois.
The company started out by producing a limited line of small butt welders for steel wire to
allow for the continuous drawing of steel wire.
It now manufactures over 50 models of butt and
flash welders, including ceramic fusion welders
for both stranded and solid conductors (steel,
copper, aluminum).
KEY PERSONNEL:
William (Bud) Banks, President/CEO
Bill Keiler, Vice President, Marketing
PRODUCT LINES:
• Dual high/low pressure systems.
• Self-aligning welding dies.
Special Services:
Reconditioning Service: for a welder as
good as new for about half the cost of a
new machine.
Sample Weld Evaluation: to evaluate
the weldability and strength of customer’s
stock sample.
Expert Technical Assistance: technicians
offer advice and help even at customer location for efficient welding solutions.
Micro-Weld butt welders are being used
in over 30 countries and the company offers service and support worldwide.
• Butt welders and flash welders for solid steel and stainless steel wire in diameters
from 0.005" up to 2.00".
• Butt welders for nonferrous solid wire from
0.007" up to 2.00" diameter.
• Butt welders for nonferrous stranded wire
ranging from 28 gauge through 2000
MCM. Higher capacities available.
• Custom rack, frame and ring welder
systems.
Micro-weld butt welders offer: Simplicity of
operation, allowing any operator to make quality welds. The extra heavy-duty primary coils
and secondaries in the welding transformers
make them powerful and long-lasting.
SALES OFFICE:
Micro Products Company
1886 E. Fabyan Parkway
Batavia, IL 60510 USA
Toll-Free: 800-872-1068
T: 630-406-9550 • F: 630-406-9552
Web Site: www.micro-weld.com
Special Features:
• Manual or pneumatic clamping.
• Pivot-type or straight slide welding headpieces.
• Exclusive Micro-Weld manual or automatic annealing system.
OSG Tap & Die, INC.
12502 Plaza Drive
Parma, OH 44130
Tel: +1 800 533 1300
Fax: +1 216 267 3356
E-Mail: dieinfo@osgtool.com
Web Site: www.osgtool.com
COMPANY PROFILE:
The Parma, OH facility of OSG
Tap & Die, Inc. has served customers in the fastener industry for
over 66 years. As part of OSG
Corporation, OSG Tap & Die,
Inc. prides itself in the superior
quality of our products, technical
expertise of our staff and business integrity that we provide
to our customers. OSG’s design
team has provided engineered
solutions for countless fastener
applications and also provides
technical assistance to customers’
engineering and production areas.
OSG Tap & Die’s Parma opera-
tion is one of the largest full-line
domestic die manufacturers in the
United States. The new, modern
facility is operated around the
clock to provide fast, on-time
delivery of new products and
provides reconditioning services
for OSG and non-OSG dies.
PRODUCTS
OSG TAP & Die, Inc. offers many
kinds of thread forming products
under the Sterling, OSG and
HYPRO brands. As an ISO 90012008 certified manufacturer,
OSG Tap & Die, Inc. offers a vast
array of products for the thread
forming industry as well as gages:
• Flat Dies
• Cylindrical Dies
• Planetary Dies
• Trimming Dies
• Segmented carbide dies
• Rack dies
• Bent shank taps
• Nib taps
• Gages
FACILITY LOCATION:
OSG Tap & Die, Inc.
12502 Plaza Drive
Parma, Ohio 44130
T +1 800 533 1300 • F +1 216 267 3356
E-Mail: dieinfo@osgtool.com
Web Site: www.osgtool.com
141
Spotlight on NIFS/WEST Exhibitors ...contin
Retina Systems, Inc.
146 Day Street, Seymour, CT 06483 USA
Tel: +1 203 881 1311 • Fax: +1 203 881 1494
Email: sales@retinasystems.com • Website: www.retinasystems.com
(Jay) Scott
solutions
offering product
material mix deRing
Masters
LLC
Retina SystemsJohn
Inc.
Software Supervisor/Development (25 years) tection, plating presence, and surface flaws
COMPANY HISTORY:
Since 1987, Retina Systems has pioneered
laser and vision automated turnkey inspection
solutions for the aerospace, medical, pharmaceutical, automotive, appliance, electronic,
munitions and fastener industries. Retina’s
U.S. Patented material handling and vision
systems provide 100% Certified inspection for
your Zero Defect, C=0 programs; the quantitative data/metrics and production reports for
your Quality and Six Sigma initiatives. Our
14,000 ft² facility in Seymour, CT houses our
software, systems, and mechanical (Solidworks®) engineering groups, full machine
shop, manufacturing floor and assembly/test
areas. All Retina System company personnel
are Six Sigma Certified.
Booth
1411material) detection.
(cracks,
chips, missing
Booth 1803 Tim Rennison
Systems Engineer/Customer Support (25 years)
• MORE Reporting:
Ring Masters,
LLC Production,
is theDowntime,
sucRetina’s inspection systems
& Efficiency Reports by Part Number, Machine
PRODUCTS & SERVICES:
cessor
theandEaton
are designed to perform
100%,
Number,
by OperatorCorporafor each LOT &
• 300 Series
Turnkey Vision Systems:
Pro- to
OPERATION.
System
archives
production
vides quantitative measurement data
for each
tion
and is manufacturer of
the
“zero defects” inspection
24
inspection attribute. Ultra High Resolution 5 data for lot traceability and accountability.
“Eaton
RingGageMasters
is
Megapixel
Vision Modules provide
Dynamic Ring”.
hours, 7 days a week.
Their
• Retina Certified:
R&R and Process
Dimensional Repeatability of +/-0.0005” in Capability studies validate the inspection
dedicated
to becoming the most
closed loop, application
driven
a production
environment, +/-0.0001”
in a process
using Minitab® statistical software.
“clean”
room
with
system
resolution
in
the
exible, responsive
and serviceinspection solutionsmicrons.
provide
100% Certified, guaranteed.
Applied world-wide for attribute
Retina Smart Conveyors
Counting:
oriented
in theand
retaindata driven quality assurance,
verification, surface flaw, prevailing
torque • company
Presettable
and
exact
piece
counts
into ¼
(deflection), turned heads and 360 degree
ing ring keg,
market.
We oěutilizing
er engireduced scrap, decreased
re-usable containers,
smart
crack downdetection.
packaging
conveyors
with
5
box
capacneering
expertise in selection,
KEY PERSONNEL
• 600the
Series
READY Vision Systems:
Intetime, and elimination of
risk
(Years in Automated Inspection):
grates in-line with assembly / manufacturing ity, over/under style with 10 box capacity,
or design, of a specic ring for
ofMoir
containment, nancial
penalFloyd W.
machines
or existing feed systems to inspect automated bagger integrations, individual
bagging, gentle part handling, robotic tray
President
years)returned shipments.
and report on dimensional, surface
yourflaw
application.
Orders of all
ties(37and
analysis, incorrect or missing components and packing, pick & place.
Scott Spencer
quantities
are Direct
welcome
Ring
±0.0001". • Retina
Director of Operations/Service (21 years) more with dynamic repeatability to
- Remote at
Access:
RealKarl Cressotti
time
Log-In
support
with
Remote
Access
• Multi-frequency Eddy Current:
InteMasters, an ISO/TS 16949:2002&
Director of R&D (29 years)
grates with Retina automated inspection Control anywhere in the world.
registered company.
Rot
Roto
of In
retai
stan
selfand
agin
avai
need
tions
men
1694
RingMasters LLC
Toll Free: 866-855-7464
240 6th St. N.W. • Massillon, OH 44647 USA
E-mail: sales@ring-masters.com
Website: www.ring-masters.net
www.retinasystems.com
COMPANY HISTORY:
RingMasters LLC is the successor to Eaton Corporation, manufacturer of the “Eaton Style Ring”.
Long considered the standard for the constant
section wire formed Retaining Ring Market, it is
Ring Masters’ commitment to continue this quality and performance legacy. RingMasters LLC is
dedicated to becoming the most flexible, rapid
response, service oriented company in the retaining
ring market. It is our goal that we will be the low
cost producer while maintaining our quality and
performance legacy.
QUALITY CONTROL:
For over 50 years we have taken pride in our ability
to meet our customers’ quality standards. Ring Masters’ certification, ISO-14001 as well as QS-9000,
reflects the caliber of commitment we have made to
achieving only the highest standards. Ring Masters
has been TS-16949 certified since February, 2006.
a housing or bore and snap into a grove exerting
radial tension outward from the ring center. We
have 3 main classes of internal retaining (snap)
rings. They are the NAN family, the IN family and
the ND family of rings.
INTERCHANGEABILITY:
External retaining rings are designed to go over a
shaft and snap into a grove exerting radial tension
towards the ring center. We have 3 main classes of
external retaining (snap) rings. They are the XAN
family, the EN family and the XD family.
Ring Masters’ uniform section rings are often interchangeable with stamped rings. They will function
in a housing or on a shaft as well as or better than
their stamped ring replacements. Interchangeability is offered in both our internal and external
series rings. Our engineering and sales staff can
help identify the correct replacement part for your
application.
Shanghai Fanto
FUTURE:Hardwares Co. Ltd.
External Retaining Rings
Shin Chun Enterprises
Co.Products/Services
Ltd.
Specialty
At Ring Masters, we provide numerous types
Booths 2103, 2105
Booth 235
of secondary processes and services. We offer
specialty
packaging, stainlessCo.,
steel retaining/snap
Built in 1985, we are a specialized
Shin Chun
Enterprise
Ltd.
ENGINEERING:
rings, material certifications with all orders, and
Ring
Masters
engineering
staff
is
extremely
exvarious heat-treating
options just to name a few.
producer of high quality
fastenis a professional
manufacturer
perienced and has designed rings for numerous
Additionally, we offer tight tolerance, precision
applications
globally. Specific ring of
designs
have grinding
and Hypro-lapping
through our most
ers in China. We produce
screws,
screws
in Taiwan.
We produce
become a specialty of our engineering staff. Ring recent acquisition, Alternative Surface Grinding
Masters
looks
forward
to
the
opportunity
to
design
bolts, nuts and washers
accordscrews for
drywall, chipboard,
(www.alternativesurfacegrind.com).
a ring to fit your application and/or needs. Please
call toll freeISO,
at 1-800-855-7464.
ing to ANSI/ASME, SAE,
tapping, self-drilling, concrete,
Internal Retaining Rings
DIN, etc. We also supply anchors.
machine, special-use, etc.
We export
in large quantities
to
Fastener
Technology International/August
2014
America, Europe and Oceania.
The export value has been up to
Ring Masters continues to diversify and target
new market segments through strategic marketing,
product development and acquisition. Proto-typing
and early stage product development are important
facets of Ring Masters’ continued growth strategy.
Ring Masters is continually looking to improve
internal efficiencies to remain a cost-leader in the
manufacture of retaining rings and snap rings for
all of your applications.
142
www.ring-masters.net
Internal Retaining Rings are designed to go through
S
Spir
buti
nati
of e
join
coile
thre
ings
Spir
eng
ROLLING TOOLS SRL
Via Milano, 3
23878-Verderio Superiore (LC), Italy
Tel: +39 039 9515455 • Fax: +39 039 951 5147
Email: info@rollingtools.biz • Website: www.rollingtools.biz
COMPANY PROFILE:
Rolling Tools is a leading company, in Italy and worldwide, in the production of thread rolling dies. Founded
in 1986, Rolling Tools has reached a position of great
prestige over the years as manufacturer of cylindrical,
flat and planetary thread rolling dies.
The high quality of our products and the ability to
meet the ever growing demands of our customers
are the elements that have characterised our history
of success. To address the increasing challenges of
a global marketplace, Rolling Tools has placed great
emphasis on the innovation of its production processes
and products, by combining continuous investments
in the latest CNC machinery with the expertise and
experience that make up its organisational structure.
For over twenty-five years, Rolling Tools products
have been synonymous of high quality threads to
be used in the automotive, aerospace, railway and
petrochemical industries.
OUR PRODUCTS RANGE:
Cylindrical Rolls: in-feed, anular, helical, fast
through-feed, knurling and special (lapping rolls,
for pulleys, for worm screws etc.) rolls.
Flat Rolling Dies: for machine screw, special thread
forms, MAThread® and MATpoint®.
Planetary dies: for machine screw, special thread
forms, SRS Planetary dies.
RE-GRINDING SERVICE:
Rolling Tools offers the regrinding service for its
entire range of products.
As all tools produced by Rolling Tools are core-
hardened, they can be reground several times by
recreating the profile required and, if necessary,
by applying a new surface treatment with very fast
execution and delivery.
selection of suitable material for each tool means
success in its final application.
The heat treatment process is considered fundamental
and distinctive in the construction of tools that ensure
high performance over time. Rolling Tools is active in
the research and development of heat treatments that
make it possible to enhance the features (core hardness,
toughness and wear resistance) of the selected materials.
Moreover, thanks to the application of the latest coatings technologies, we have defined the most suitable
surface treatments in accordance with materials used in
customer applications, such as stainless steels, low carbon steels, titanium and special alloys. Our treatments
make it possible to increase surface hardness up to suitable depths and protect tools from premature wear.
QUALITY THROUGH RESEARCH & DEVELOPMENT:
PROFILES & GEOMETRY:
Rolling Tools produces high-quality threading dies
through a consolidated and innovative production
process, in which all phases are characterised by
utmost accuracy and precision, as they are subject
to continuous strict controls. Process planning and
control ensures steady and rapid communication
between company departments to provide timely
responses to customers.
For each tool made, both new and reground, Rolling
Tools ensures full traceability over time for each
stage of the process by means of appropriate marking.
Rolling Tools has obtained the UNI EN ISO
9001:2008 Quality Certification.
Our manufacturing system, through the grinding
process, takes place thanks to modern CNC machines supported to CAD/CAM systems that ensure
maximum repeatability and consistency over time.
For the entire range of products, Rolling Tools can
manufacture main profile (ISO, UNF, UNJ, MJ,
etc.), special threads based on a customer’s design
in addition to being authorised manufacturers of
MAThread® and MATpoint®.
For all of its tools, Rolling Tools offers the possibility of Standard and special RRO (Radiused Root
Runout), based on the customer’s application. A
proper RRO allows to evenly distribute the forces
exerted and to reduce tensions thus increasing the
service life of the tool.
Rolling Tools is a reliable/skilled partner of customers ensuring high quality products and performance.
MATERIALS & TREATMENTS:
Rolling Tools selects and uses high-speed steels
(AISI M2 and AISI M42) and special alloys
(HQC) from the leading European steel mills. The
SASPI
Zona Industrial Intxausti s/n°
20720 AZKOITIA (Gipuzkoa), Spain
Tel: 34-943 85 02 62 943 85 02 66
Fax: 34-943 85 34 45
E-mail: saspi@saspi.es • www.saspi.es
COMPANY PROFILE:
SASPI always works taking into account the needs of
workers and enterprises. Therefore the machines are
designed to maximize production times and reduce down
time for set ups and change over, as well as allowing
an operator freedom to manage multiple jobs. For this
reason the machines are automated and motorized in
order to avoid the use of tools as much as possible and
increase the efficiency and precision of adjustments.
All the rails are motorized as well as the die match and
both dies are clamped hydraulically. All these facts are
controlled by a touch screen where you are able to store
job numbers into the memory and recall when needed
with all set up dimensions. The display may include an
integrated process monitor.
SASPI has motorized the die block so you can adjust the
diameter, with high precision, just pressing the screen,
saving a lot of manual work and time. This feature makes
SASPI machines the fastest machines in changeover.
Apart from thread rollers SASPI has a range of high
quality products as their well known MPA high-speed
shave pointers. These elements can be combined
together to form complex machines like thread rollers
with pointers, washer assembly units, stud selectors or
induction heaters.
The MPA-14 automatic pointing machine is a very reliable, easy to use high speedy pointer. It is fully motorized
(centring, rails, top rail, spindle head...). One of the greatest features is that every part is held as close to the end
as possible during the pointing, facing or drilling process
regardless of the length. So we avoid the vibrations at
maximum and we gain precision and finishing quality
of the part. This is a unique feature of SASPI machines.
Recently we have introduced a process control system
in our pointers that measures the amperage that is using
the machine all the time. So we can control if something
goes wrong in a part or if the inserts are worn-out.
HISTORY:
Talleres SASPI, SA is a company founded in 1961 in
Azkoitia by seven partners. The name SASPI is derived
from “zazpi” (seven in Basque). It is a company that
since its inception it has clear that local and national
market was not his goal. The true potential of their
machines sales was abroad. Although been a humble
company, it was a pioneer in machine tool exports abroad
and outside Europe, overcoming all the problems they
had at the time. It was a company belonging to a market
that in Spain had virtually no competitors and worldwide
were few companies competing on the same level and
dare to export.
In 1986 the company changed management, which further boosted exports and increased the range of products,
thus covering the needs of all types of manufacturers of
screws. With the new support, the company was again
among the market leaders. SASPI has machines in more
than 15 countries.
The last few years, and to overcome the introduction
of new industries to market SASPI chose to increase
the quality and technology of machines to excel in the
market and most elite specialized industries such as
automotive and aerospace. These industries are very
strong and powerful industries where part quality matters more than price.
ACTIVITY:
SASPI, a company located in the municipality of Azkoitia, since its inception in the 60s, has evolved constantly
adapting to market needs. Proof of this has been the
move from being a small manufacturer of machinery,
to actually be a leader in manufacturing machinery for
sectors such as aerospace and automotive.
In this long should be noted the special attention SASPI
intended to:
• Get the best quality.
• Innovate with new product development and application of cutting edge technology.
• Competitive pricing.
SASPI always has been committed to the internationalization of the company, getting a presence on
five continents through its extensive sales network.
SASPI is characterized by its aim of offering customers the best service possible focusing its efforts on
continuous research of new technologies that allow
them to develop innovative products that differentiate us from the competitors, besides studying the
needs of the client to determine with certainty the
processes and equipment that best suit their needs.
For this purpose SASPI has a fully equipped R &
D department which works in achieving these goals
and has emerged as the key determinant of its progressive growth.
143
Sin Hong Hardware Pte. Ltd.
No. 3 Kian Teck Crescent
Singapore 628881
Tel: 6265 1555
Fax: 6265 2115
Website: www.sinhong.com.sg
CORPORATE PROFILE:
citon delivery requirements by implementing
supply Just-In-Time, Two Bins Systems, Kan
Ban System and other logistic replenishment
systems.
Sin Hong Hardware is committed to work
towards full comprehensive range in stock
items and be recognized as a preferred supplier in the region.
Established in 1980, Sin Hong Hardware
Pte. Ltd. has expanded rapidly to become
one of the largest stockists, distributors and
manufacturers of a wide range of industrialfasteners, and a specialist in standard, nonstandard and customized fasteners.
We started as a local fastener retailer that
has steadily grown to our present company
covering multiple business segments. Our
3 SBU incude domestic retailing, OEM
supples services and exporting overseas.
We strive to be the largest total integrated
“one-stop” fasteners solution provider and
supplier in the region. Our export market
covers the southeast Asia to South America
in the west and Fiji in the east.
We also cater to customers with special parts
or custom-made parts for assembly requirements in various manufacturing industries.
We also provide special services such as
Ship-To-Stock programs according to produ-
PRODUCTS:
Standard Fasteners:
ISO/DIN/JIS/ANSI/BS/Military Standards-MS and NAS standards.
Other Fasteners:
Clinching nut/studs, weld studs, standoffs
and spacers, etc.
Special Fasteners:
Custom-made fasteners and machine
turned parts according to technical drawing
specifications.
Materials:
Stainless steel, carbon steel, alloy steel,
brass, aluminum, titanium, nylon, etc.
Service & Programs:
Vendor inventory management, JIT, Two
Bins, Kan Ban, logistics replenishment
systems.
APPLICATIONS:
• Machine manufacturers and assemblers
• Automation assembly
• Electronic assembly
• Metal stamping
• Construction builder
• Shipyard
• Aerospace, aviation and more
SALES OFFICE:
Sin Hong Hardware Pte. Ltd.
No. 3 Kian Teck Crescent, Singapore 628881
Tel: 6265 1555 • Fax: 6265 2115
exportsales@sinhong.com.sg
Smalley Steel Ring Company
555 Oakwood Road
Lake Zurich, IL 60047
Tel: +1.847.719.5900 • Fax: +1.847.719.5999
www.smalley.com • info@smalley.com
Smalley Steel Ring Company is the leading
manufacturer of Spirolox® Retaining Rings,
Constant Section Rings and Wave Springs.
Spiral rings offer a 360° retaining surface and
are interchangeable with standard stamped
ring grooves. Spiral retaining rings require no
special tooling for removal and have No Ears
to Interfere® with the assembly. Flat wire wave
springs reduce heights by up to 50% while offering the same force and deflection as standard
coil springs. Wave springs fit in tight radial and
axial spaces. With over 10,000 standard parts
to select from, all Smalley parts are available in
carbon and stainless steel off the shelf. Special
parts can range from .200” to 120” in diameter.
There are No-Tooling-Charge™ on specials.
Exotic alloys are readily available.
ABOUT SMALLEY:
For over 50 years, Smalley has manufactured
retaining rings and wave springs using our unique
coiling technology. Smalley has become established as the top manufacturer of spiral retaining
rings and flat wire wave springs. Smalley is ISO
9001, ISO/TS 16949, AS9100 and ISO 14001
certified.
144
PRODUCTS:
Wave/Compression Springs: Smalley Wave
Springs (Flat Wire Compression Springs) offer the
unique advantage of space savings when used to
replace coil springs. By reducing spring operating height, wave springs also produce a decrease
in the spring cavity. With a smaller assembly
size and less material used in the manufacturing
process, a cost savings is realized. Wave springs
operate as load bearing devices. They take up
play and compensate for dimensional variations
within assemblies. A virtually unlimited range of
forces can be produced whereby loads build either
gradually or abruptly to reach a predetermined
working height. This establishes a precise spring
rate in which load is proportional to deflection.
Spirolox® Retaining Rings: Spirolox Retaining Rings, available exclusively from Smalley,
have No Ears To Interfere® with the mating components in the assembly. Spiral rings offer a 360°
retaining surface, require no special tooling for
removal and are interchangeable with ordinary
snap ring grooves.
Constant Section Rings: Constant Section
Rings are often specified for heavy duty or impact loading applications. Smalley offers eight
series of rings from stock in over 1,000 sizes.
Laminar Sealing Rings: A Smalley Laminar
Sealing Ring is a metallic labyrinth seal consisting of multiple rings in a groove. This arrangement of the rings and the specific orientation of
the rings are dictated by the application and the
severity of the environment.
MANUFACTURING PROCESS:
Smalley offers an exclusive Circular-Grain®
Process. This process is not a stamping, but
rather a continuous coil that is made from
edge-wound, pre-hardened, spring-tempered
flat wire. The flat wire has a grain structure
that is linear, providing exceptional strength
and dimensional stability. Smalley’s unique
manufacturing process reduces scrap allowing
for the economical production of special alloy
products including a large selection of stainless
steel retaining rings and wave springs.
FREE SAMPLES:
Smalley will send samples of catalog items
for your evaluation, free of charge. To make
a request, simply go to www.smalley.com/
samples. From www.smalley.com you can
request free samples, catalogs, download CAD
models and request design assistance or design
your own application specific ring or spring.
Tapco Inc.
225 Rock Industrial Park Drive
St. Louis, MO 63044 USA
Tel:+1 314 739 9191
Tel:+1 800 288 2726
Fax: +1 314 739 5880
Web Site: www.tapcoinc.com
MISSION STATEMENT:
Tapco’s specialty, Elevator Bolts, are
available from our huge stock of over 15
million. As the No. 1 source for these hardto-find bolts, we are committed to the highest quality materials, top-notch service, and
competitive pricing.
COMPANY HISTORY:
Tapco was founded in 1974 by Paul
Taylor and Ted Beaty. They formed the
acronym Tapco from the words Ted And
Paul’s Company.
Although originally designed for holding
elevator buckets to belts used in the grain
industry, the very versatile fl at headed bolt
is used in a wide variety of applications.
We at Tapco, feel the future is unlimited.
Our exporting is growing every day. We have
shipped to more than 50 different countries
around the world. Stock is maintained,
by distributors in strategic U.S. locations
for prompt delivery. For our international
accounts inventory is stocked in North
America, Central America, South America,
Australia, Western Europe and the Pacifi c
Rim. This segment of the market is keyed
for further growth.
PRODUCT LINE:
Six styles:
• No. 1 Norway Flat Countersunk Head
• No. 3 Eclipse Slotted Head
• Fanged
• Pointed Fanged
• Western 3-Prong Head
• Reference 70 Style
Thread sizes ¼"-20, 5/16"-18, 3/8"-16,
½"-13, M8 and M10 are stocked in various lengths.
CAPABILITIES:
• Immediate delivery on all stocked items.
• Worldwide network of distributors.
• In-house quality control guarantees superior strength. All Tapco bolts are tested for
Tensile Strength, Torque, Thread Conformance and Rockwell Hardness. All Tapco
bolts exceed IFI specifications.
SALES OFFICE:
Tapco Inc.
225 Rock Industrial Park Drive
St. Louis, MO 63044 USA
Tel: (314) 739-9191
Tel: (800) 288-2726
Fax: (314) 739-5880
Email: info@tapcoinc.com
Web Site: www.tapcoinc.com
54 sizes in three materials:
• Carbon steel
• Zinc plated
• Stainless Steel
T.L.M. Srl
Viale Mariano Dellepiane, 10/L
15057 Tortona (AL) Italy
Tel: +39 0131 81 30 43/81 • Fax: +39 0131 81 44 56
www.tlmweb.it
COMPANY PROFILE:
For more than 30 years, T.L.M. Srl has been in
business to manufacture the following:
• Machines for the rolling of screws, bolts and formed parts.
• Machines for chamfering or pointing of screws.
• Machines for assembling screws and washers.
• Special machines for producing grooves, etc.
Automated production-design not only aimed
at sepcifical customer expectations, but also
several detailed workings. T.L.M. Srl is ideally
equipped to provide operations such as:
• Milling
• Sinking
• Boring
• Assembling, on sets supplied by customers
Moreover, T.L.M. can supply electrosolded and
stabilized structures of medium dimensions.
T.L.M. operates professionally and is always
available to help satisfy customers’ needs.
In addition to Italy, T.L.M. customers are
located all over Europe and the world.
PRODUCTS:
T.L.M. manufactures a wide range of standard
and special machines able to roll screws for
wood, hardened and tempered parts and also
special screws to be used in diverse fields such
as construction, automotive or white goods.
Throughout the years, the compny has improved these machines both technologically
and in a productive capacity.
T.L.M. has also been continuously engaged in
research and in technical innovation. T.L.M. always produces prototypes and novel solutions.
Mr. Pietro Luigi Sorli, Managing Director of
the Company and Manager of the engineering
departement, is always available for customers
in order to solve any problem about the execution of special parts.
Other special machines are also offered for
clients producing particular details:
• Rolling machines with level combs: RP4-6-8-10-12-16-20-27
Threading diameter from 1.7 to 27 mm. In
this range, is also the RP10/LD, studied to
roll improved details with a system of double
introduction and special lubrication.
• Rolling machines: RP8/S — RP12/S
Rolling machines with level particular combs,
with raised tool post slide, appropriately studied
for rolling of difficult details to roll.
Threading diameter from 4 to 12 mm.
• Rolling machine with thread roller and sector: RS-6-8-12-16-20
Rolling machine with thread roller and sector:
RS-6-8-12-16-20 diameter for threading diameter from 2 to 20 mm.
• Bevelling machines: SM1-2-3-4
• Bevelling machines to execute points and particular details
Screw diameter to sharpen from 6 to 16 mm.
• Group charging washers: CR
Group charging washers adaptable to every
kinds of rolling machine, complete with studied
and dedicated program to the charger, on PLC
Siemens last generation.
KEY PERSONNEL:
Pietro Luigi Sorli
Managing Director and Manager of Engineering Deptartmnt
145
Witels Albert USA, Ltd.
208 East Pier Street Unit B
Oxford, MD  21654
Phone 410-228-8383
Fax 410-228-1813
E-Mail: info@witels-albert-usa.com
Web www.witels-albert-usa.com
PRODUCT LINES:
FOUNDING PRINCIPLES:
COMPANY BACKGROUND:
The use of modern production and engineering
technologies to ensure the highest product quality.
Optimum production organization and control
(KANBAN) ensure the rapid availability of all
products.
Continuous investments in R & D result in constant innovation. Our patents and our new and
further developments are the result of this policy.
This associated basic research provides us with the
knowledge, which is vital for an understanding of
the straightening process and the processes, which
precede and follow it.
We match our equipment to the individual wishes
and needs of our customers with:
• a wide range of product types,
• different sizes,
• varying numbers of rolls to suit the application,
• a wide range of ancillary products, and
• a wide ranging production program covering straighteners, straightening rolls, roller guides, drive systems,
preformers as well as products for the cable industry.
A worldwide customer service-focused sales
organization.
Witels Albert specializes in the straightening and
guidance of endless materials and builds machines
to perform these operations.
The firm’s history dates back to 1946 for Witels and
1898 for the Albert Co. Hermann Albert, Eckehard Albert’s great grandfather, founded the Albert Co. Walter
Wittig founded the Witels Co., which was taken over
in 1969 by Eckehard Albert. In 1970, Witels Albert
Germany Co. expanded activities in the development
of straightening devices and other tools for the wire
industry, which they have supplied since the 1900’s. In
August 1996, Witels Albert – Berlin established a sales
office in the USA. Following Mr. Albert’s retirement
in 2001, the company continues to remain the industry
leader in new innovations for the wire/cable industry.
KEY PERSONNEL:
Witels Albert USA, Ltd.
HEADQUARTERS:
Bob Flower, Jr. – General Manager
Witels Apparate-Maschinen Albert GmbH
Malteserstraße 151-159
D-12277 Berlin, Germany
T: +49 30/72 29 88-0 • F: +49 30/72 39 88-88
info@witels-albert-de • www.witels-albert.de
Witels Apparate-Maschinen Albert GmbH
Marcus Paech – Tech. Managing Director
Horst Schneidereit – General Manager
• Rotary & roll-type straighteners in over 17 models for material dia. up to 40mm. Models come with
3 to 14 rolls in single or double plane arrangements.
• Roller guides - 15 models up to 250mm diameter.
Chromium plated, hardened, plastic, rubber with
no-maintenance bearings.
• High-quality rolls with a thick outer ring, which
avoids oval squeeze and early wear.
• Preform heads for many rope/cable diameters,
different lay length/central adjustment.
• Drive units for flexibility in existing lines when
more pulling force is needed.
• Simulation program – software for the determination of roller positions based on the wire straightener
parameters and material specifications.
• Specialized solutions – offering seminars, training,
and education in the operation/maintenance of our
equipment giving us the advantage of providing better
quality and consistency in the straightening process.
Wrentham
Tool Group LLC
155 Farm St.
Bellingham, MA 02019 USA
Tel: +1 508 966 2332 • Fax: +1 508 966 2326
Email: customerservice@wrenthamtool.com
Website: www.wrenthamtool.com
MISSION STATEMENT:
• Recess Punches & Hammers – Phillips Square Driv
Phillips®, Pozidriv®, ACR®, Phillips II®, Hexlobe®,
Quadrex®, Torx®, Torx Plus®, Square, Struck Slot,
HEXSTIX®, Conventional, One-Way, Holt Head and
Hexagon Socket, Mortorq®, TTAP®,TORQ-SET®,
TRI-WING®, Mortorq Super®.
• Header Tooling – Knock-Out Pins (straight & headed),
Screw Slotting Saws, Fingers & Carbide Reamers,
Carbide and Steel Knives, Quills, Dies and Casings.
Wrentham Tool Group LLC is committed to producing
and delivering the highest quality recess punches, header
tools and gaging at competitive prices, along with providing our customers the finest service in the industry.
COMPANY HISTORY:
Wrentham Tool Group has been a leading supplier of cold
heading tools since its founding in Wrentham, MA, USA
in 1948 and is the longest operating and most experienced
header tool manufacturer in the world. WTG has undergone many changes including ISO 9001:2008 certification
and continues to re-invent itself to better serve the ever
changing global market. Year after year, WTG continues
to outperform the competition and expand its product line
and operations. As a result of this dedication to continuous
improvement, WTG has become the market leader in a
wide range of hot and cold heading tools.
Recent acquisitions include RICO, Astro, and the Acument Pin Shop. RICO and Astro were purchased from
PCC in July 2010. The Acument Pin Shop was purchased
from Acument Global Technologies in April 2012. As a
result of these acquisitions WTG is now the largest recess
header tool manufacturers in the industry.
OFFICE PERSONNEL:
James Ehrhardt: President
Robert Croteau: VP of Technology
Wes Stoskopf: Controller
Steve Doldo: Quality Manager
Tony Bernier: Sales Rep - North America
Philip Healey: Inside Sales/Traffic
Tee Nan: Customer Service Rep
PRODUCT LINES:
• FEATURED! Gages–Penetration Gages, Plug
Gages, Special Gages, Ring Gages and Test Blocks
available in all recess types. Certifications are
available upon request.
• FEATURED! Trim Dies-Round, Hex, 12-Point, Special
• Hexagon Washer Head Tooling – Hexagon Inserts &
Pins (round & hex indent), Combination Hexagon Pins
(Phillips®, slotted, etc.), Indented Hexagon Punches.
146
the RECESS header tool specialist
®
CAPABILITIES:
Wrentham has the engineering and manufacturing capability to provide our customers with a complete tooling
package whether it be for a standard fastener or a high
performance aerospace product.
Wrentham is pleased to announce the addition of Black
Diamond™ Gages to its already extensive product offerings. Tooling is available in a variety of high tech alloys
and can be supplied with coatings of all types including
our proprietary MOAC™ coating for long life on those
difficult-to-head materials. Call for details.
MARKETS SERVED:
Wrentham Tool Group tooling is sold/distributed domestically and internationally.
Wrentham Tool Group LLC
155 Farm St., Bellingham, MA 02019 USA
Tel: 1 508-966-2332 • Fax: 1 508-966-2326
e-mail: customerservice@wrenthamtool.com
Midwest:
Greenslade Fastener Services L.L.C.
John Bergstrom
129 S. Phelps Ave. Ste. 4080, Rockford, IL 61108 USA
Tel: 1 815-893-4073 • Fax: 1 815-398-4107
Toll Free: 1 877-467-8870
E-Mail: john@greensladeefs.com
International:
GE Pariot, Gilles Pariot
43 Grande Rue, St Jean De Beauregard, France
Tel: 011-331-601-23196, Fax: 011-331-601-23108
e-mail: gilles.pariot@wanadoo.fr
Gee Punches & Pins
Ian Gregory
The Laurels, Walsall Rd.Springhill, Lichfield, Staffs
WS14 OBX England
Te1: 01543-360357 • Fax: 01543-370393
Dipl.Ing. Fritz Lichthart Betriebsges. mbh
Romerweg 21 58513 Ludenscheid Germany
ph +49 2351 95380 • fax +49 2351 9538 30
e-mail info@lichthart.de
Santech Industrial Technologies Ltd.
Rifki Tongsir Cad no 38-1/7 34831
Kucukyali-Istanbul Turkey
ph +90-216-518-3594 • fax +90-216-366-5809
Kadir.okcur@santech.com.tr
CMF Marelli S.R.L, Mr Sergio Piero
Via Casignolo, 10
Cinisello Balsamo, Milano, Italy 20092
Phone: 39-026182401 • Fax: 39-026122944
viteria@cmf.it
Comtesa, Mr Juan Figueras
Calle Diputacion, 410 Bjos
Barcelona, Barcelona Spain 08013
Phone: 34-93-2657232 • Fax: 34-93-2652473
juanfigueras@comtesa.com
Southwind International, Mr John Graef
Rua Joaquim Floriano, 466, Suite 201
Office Tower Sao Paulo/SP Brazil 04534-002
Phone: 55 (11) 3165-9999 • Fax: 55 (11) 3079-8636
John Graef- swind@southwind.com.br
Hypertool, Renson Lin
14F, NO.61, LN.189, Mengi RD, Zuoying Dist.,
Kaousingh City, Taiwan, ROC
Tel: 886-735-03361, Fax: 886 734-10639
e-mail: renson.lin@gmail.com
FASCON, Steven Fang
Tai Yuan Rd SEC.2, NO. 19, Taichung, Taiwan, ROC
Tel: 011-886-4-2295-7070, Fax: 011-886-4-2295-6060
e-mail: sfang@fascon.com
Fastener
Focus
• Asian News Report
•Benefits of Using Metric Fasteners Over Imperial
•Straight From The Show Report: MWFA Fastener Expo & Golf Outing
Presented by...
Bradley Pre-Applies The
Way You Like It...
Perfectly and Promptly!
In this issue...
•“Fastener Distributor Index (FDI)” Column
August 2014
Bradley’s fast turnaround, state-of-the-art
pre-application operations provide the
service you require, including:
•
•
•
•
•
•New Products
BrAdLeY
Standard
White
Nylon Patch
3M™ SCOTChGrIP™
2353 Blue
Solvent Based
Adhesive
• Specifying Metal Curtain Wall Fasteners
•“Tracking Your Fasteners” Column
204 dri-Loc
Internal Threads
Immediate quotes
Competitive pricing
Computerized order acknowledgement
Delivery promises kept
Compliance with IFI
and most industry specs
•60 Years of Blind Rivet Nut Innovation
•NCFA Night at the Ballpark
LOCTITe®
CASTING
IMPreGNATION
Porosity Sealing
THE
BRADLEY
GROUP
OF COMPANIES
1-800-201-7381

August 2014/Fastener Technology International 97

Transcription

Similar documents

Porteous Fastener Company is pleased to announce

is proud to present the Ductmate Industries proudly presents the

type iii structural fasteners

- Malibu Kayaks

Welcome to - Serviced Office

the program brochure

Multi System Tables - Bilhares Carlos Teofilo

rubber and composite solutions provider

swimwear up to aj cup

PRICE TOTAL $ FIBA Shot Clock *pair