Dealer Parts MASTERspa.indd

Transcription

Dealer Parts Catalogue
Master Copy • All Components • All Countries • Internal Use Only
Blue Falls Manufacturing
4549 - 52 Street, Thorsby, Alberta
Canada T0C 2P0
Ph: 780.789.2626 Fax: 780.789.2624
Email: info@goarctic.com
Copyright to Blue Falls Manufacturing & Arctic Spas
Pg 1
April 2003
Table of Contents
--
Current Parts
Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Therapy Air Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Jets And Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PVC Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Specialty PVC And Misc . . . . . . . . . . . . . . . . . . . . . . . 34
Lippert Ozone System . . . . . . . . . . . . . . . . . . . . . . . . 37
Peak Ozone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 39
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Gecko Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 55
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Spa Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Cabinet Cedar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Arctic Castcore Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Coyote Castcore Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Spa Bags . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . 90
Stereos. . . . . . . . . . . . . . . . .. . . . . .. . . . . .91
Pg 2
Table of Contents
--
Previous Parts
Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Therapy Air Systems . . . . . . . . . . . . . . . . . . . . . . . . . 98
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Jets And Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 105
PVC Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Peak Ozone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Gecko Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Balboa Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Spa Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Cabinet Cedar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Specialty Tools. . . . . . . . . . . . . . . . . . . . . . . .152
Pg 3
Hoses
CURRENT PARTS
Part Name: 3/8” x 9/16” Clear Hose
Part Number: JET-109049
Manufacturer: Tek Tube
Country of Origin: United States
Tubs Used On: All
Used From: June 1994
Description: Air Line Hosing; Roll Length = 300 ft.
Part Name: 3/4” Torsion Flex Hose (White)
Tubs Used On: All
Used From: November 1999
Description: 3/4” pressure side water hose, connects manifolds
to jets; Roll Length = 100 ft.
Part Name: 2 3/8” Torsion Flex Hose (Blue)
Tubs Used On: All
Description: Pressure side water hose; Roll Length = 50 ft.
Part Name: 2 3/8” Torsion Flex Hose (Red)
Tubs Used On: All
Description: Suction side water hose; Roll Length = 50 ft.
4
Hoses
CURRENT PARTS
Part Name: 1.5” Flex Hose (Black)
Tubs Used On: All
Used From: July 2001
Description: Used to plumb the Orca jet; Therapy Air;
Roll Length = 50 ft.
Part Name: 1” ID Flex Hose (Green)
Tubs Used On: All
Used From: February 2001
Description: Used to plumb Therapy Air; Master
Massage Jet; Aroma Therapy.; Roll Length = 50 ft.
5
Manifolds
CURRENT PARTS
Part Name: Manifold 2 port soc x spig (2 port x 3/4” Barb)
Manufacturer: Waterway
Tubs Used On: All
Description: Used on the pressure side as a water to jet junction
Part Name: Manifold 2 port Spg x Spg (2 port x 3/4” Barb)
Manufacturer: Rising Dragon
Country of Origin: China
Tubs Used On: All
Used From: September 2004
Part Name: Manifold 4 port Soc x Spg (4 port x 3/4” Barb)
Tubs Used On: All
ParaPart Name: Manifold 4 port Spg x Spg (4 port x 3/4” Barb)
Tubs Used On: All
Pg 6
Manifolds
CURRENT PARTS
Part Name: Manifold 6 port Soc x Spg (6 port x 3/4” Barb)
Tubs Used On: All
Part Name: Manifold 6 port Spg x Spg (6 port x 3/4” Barb)
Tubs Used On: All
Part Name: Manifold 8 port Soc x Spg x Spg (8 port x 3/8” Barb)
Tubs Used On: All
Description: Connects up to 8 air lines to the jets and connects to
the air venturi
Part Name: Barbed Tee 3/8”
Part Number: PRT-124050
Tubs Used On: All
Description: Used to splice 3/8” airline for venturi system.
Pg 7
Manifolds
CURRENT PARTS
Part Name: 1”x(4)3/8”barb air manifold AS#28
Tubs Used On: All
Description: To expand the number of air venturi lines on the
8 port manifold
Part Name: 6 x 3/8” port x 3/4” manifold
Part Number: Jet-110110
Tubs Used On: Used on all Tundras, Cubs, Yukons, and Klondikers.
Used From: April 2004
Description: Used to expand the number of air lines to the air contols.
Pg 8
Suction
CURRENT PARTS
Part Name: 200gpm suction body
Tubs Used On: All Arctics
Description: Suction body
Part Name: 200gpm suction cover
Description: Suction cover
Part Name: 200gpm suction nut
Description: Suction nut
Part Name: 200gpm suction o-ring
Description: Suction o-ring
Pg 9
Suction
CURRENT PARTS
Part Name: Suction 2” fitting 100gpm
Tubs Used On: All Coyotes
Used From: March 2000
Description: Suction used on all Coyote Spas.
Part Name: Peak Suction 100gpm Cover
Description: Suction cover for Coyote spas
Part Name: Peak Suction 100gpm Wallfitting
Tubs Used On: Peak systems and Coyote tubs
Description: Suction wallfitting Coyote spas
Part Name: Peak Suction 100gpm Nut
Description: Suction nut for Coyotes spas.
Pg 10
Therapy Air Systems
CURRENT PARTS
Part Name: 1.5 HP 120V Blower
Part Number: PAK-112755
Manufacturer: Air Supply of The Future
Tubs Used On: Therapy Air Option (North American)
Used From: April 2004 (can replace previous models)
Description: Blower used for North American Spas with Therapy
Air Option.
Part Name: 2 HP 240V CE Blower
Manufacturer: ITT
Country of Origin: Denmark
Tubs Used On: Therapy Air Option (International)
Used From: February 2002 (Can replace previous models)
Description: Blower used for International Spas with Therapy Air
Option.
Part Name: JJ Cord 8ft (Euro Blower)
Manufacturer: J & J Electronics
Tubs Used On: Therapy Air Option (International)
Used From: January 1998
Description: Cord used for blower on International Spas with
Therapy Air Option.
Part Name: JJ cord 8ft (NA Blower)
Manufacturer: J & J Electronics
Tubs Used On: Therapy Air Option (North American)
Description: Cord used for blower on North American spas with
Therapy Air option.
Pg 11
Therapy Air Systems
CURRENT PARTS
Part Name: Therapy air Injector insert
Tubs Used On: All with therapy air systems
Description: Injector insert for therapy air system
Part Name: Therapy Air Injector body
Tubs Used On: All with therapy air systems
Description: Injector body for Therapy air system
Part Name: 1 1/2” Check Valve (1/4 lbs)
Manufacturer: Carlyle Company
Country of Origin: Canada
Tubs Used On: All Therapy Air Options
Description: Connects to Blower to stop backflow of water;
Replaces part PRT-117800
Pg 12
Filters
CURRENT PARTS
Part Name: Filter Cover with Logo
Part Number: FIN-103251
Manufacturer: Poly Rose
Tubs Used On: All Except Marmot
Description: Covers the filter bucket.
Part Name: Marmot Filter Complete
Tubs Used On: Marmots
Description: Wall mount weir filter housing complete.
Part Name: Filter Skim Complete
Tubs Used On: All
Description: 2” inlet/outlet complete with cartridge, basket and
weir assembly
Part Name: Filter Cartridge 25 sq. ft.
Part Number: PRT-114LOT/case PRT-114950/each
Manufacturer: Filbur
Tubs Used On: All
Used From: N/A
Description: Caselot Quality of 25 sq. ft. filter; 16 per case
Pg 13
Filters
CURRENT PARTS
Part Name: Filter Cartridge 50 sq. ft.
Part Number: PRT-115LOT/case PRT-115000/each
Tubs Used On: All European Spas
Used From: N/A
Description: Caselot Quality of 50 sq. ft. filter; 16 per case
Part Name: Filter top weir
Tubs Used On: All except Marmot
Description: Part used in short body skim filter
Part Name: Filter bottom weir
Part Name: Filter Lock ring
Pg 14
Filters
CURRENT PARTS
Part Name: Filter basket
Description: Part used in skim complete.
Part Name: Filter Cartridge Disposable
Part Number: PRT-900Lot
Manufacturer: Micropure H2O Filtration
Tubs Used On: All North American spas
Descriptioin: Caselot Quality of Disposable Filters; 15 per case
Part Name: Marmot Filter Cartridge (10 sq ft)
Tubs Used On: All Marmots
Used From: N/A
Description: Filter cartridge used in all Marmot spas.
Pg 15
Jets & Accessories
CURRENT PARTS
Part Name: Mini pulse jet internal large face (standard)
Tubs Used On: All
Used From: December 2001
Description: Standard jet insert for mini jet
Part Name: Mini pulse jet nut
Tubs Used On: All
Description: Tightens backside of jet to tub shell
Part Name: Mini pulse jet body
Tubs Used On: All
Description: Mini jet body
Part Name: Mini pulse jet self-align ring
Tubs Used On: All
Description: Used with body nut to compensate for uneven shell
surface
Pg 16
Jets & Accessories
CURRENT PARTS
Part Name: Mini pulse jet gasket
Tubs Used On: All
Description: Used to seal back side of mini jet body
Part Name: Mini twin pulse jet internal twin roto
Tubs Used On: All with exotic jet package
Description: Part of exotic jet package
Part Name: Mini flex jet internal directional
Part Name: Mini flurry jet internal
Pg 17
Jets & Accessories
CURRENT PARTS
Part Name: Jet Mini Pulse Complete
Tubs Used On: Parts only
Description: Combines all mini pulse components into 1 part#
Part Name: Mini pulse jet internal small face
Tubs Used On:
Description: Used on soft-pull jet pockets
Part Name: Pulse jet internal
Tubs Used On: All
Description: Standard insert for pulse jet
Part Name: Pulse jet body
Tubs Used On: All
Description: Pulse Jet Body
Pg 18
Jets & Accessories
CURRENT PARTS
Part Name: Jet Blizzard
Part Name: Jet Pulse Complete
Tubs Used On: Parts only
Description: Combines all pulse components into one part#
Part Name: Pulse jet gasket
Tubs Used On: All
Description: Used to seal backside of pulse jet body
Part Name: Pulse jet nut
Tubs Used On: All
Description: Tightens backside of jet body to spa shell
Pg 19
Jets & Accessories
CURRENT PARTS
Part Name: Pulse jet self-align ring
Tubs Used On: All
Description: Used with body Nut to compensate for uneven spa
shell
Part Name: Flex jet internal directional
Description:Part of exotic jet package
Part Name: Twin pulse jet internal
Part Name: Flurry jet internal
Pg 20
Jets & Accessories
CURRENT PARTS
Part Name: Jet Orca Large Complete
Manufacturer: WaterWay
Tubs Used On: All 8ʼ spas
Description: Power swim jet used on every 8ʼ spa
Part Name: Ozone/cluster jet body
Tubs Used On: All
Description: Jet body for ozone & coyote cluster jets
Part Name: Ozone jet wallfitting black
Tubs Used On: All
Description: To be used with JET-112110 as an ozone jet for
after-market ozonators
Part Name: Cluster jet wallfitting (coyote)
Tubs Used On: All
Description: To be used with JET-112110 to create a cluster jet.
Pg 21
Jets & Accessories
CURRENT PARTS
Part Name: Spinning 3” jet compensator ring
Tubs Used On: All
Description: Compensator ring for spinning micro jets
Part Name: Spinning 3” jet insert
Tubs Used On: All
Description: Insert for spinning micro jets, used with JET-112121
Part Name: Spinning 3” jet body
Tubs Used On: All
Description: Jet body for spinning micro jets, used with JET-112120
Part Name: Spinning 3” jet o-ring
Tubs Used On: All
Description: O-ring for spinning micro jets
Pg 22
Jets & Accessories
CURRENT PARTS
Part Name: Spinning 3” jet nut
Tubs Used On: All
Description: Nut for spinning micro jets
Part Name: DiverterValve 2” Black Notched NEW
Tubs Used On: All
Description: Controls flow of water from one area of the spa to
another
Part Name: Aroma Therapy Cannister
Tubs Used On: All
Description: Containment assembly for aromatherapy pellets.
Part Name: Temperature Sensor Well
Manufacturer: Aquatemp
Tubs Used On: All
Used From: May 2000
Description: Housing for the water temperature sensor
Pg 23
Jets & Accessories
CURRENT PARTS
Part Name: Spa Drain Low Profile
Part Number: Foa-104101
Tubs Used On: All
Description: Spa footwell drain assembly
Part Name: Spa Drain External
Part Number: FOA-104100
Tubs Used On: All
Description: Drain and fill the spa
Part Name: Blower Assist Tee
Tubs Used On: All
Description: Air venturi to aroma therapy canister.
Part Name: Air control gasket
Tubs Used On: All
Used From: May 2002
Description: Basket used in part# Jet-109201
Pg 24
Jets & Accessories
CURRENT PARTS
Part Name: Air Control
Tubs Used On: All
Description: Jet air system manual Switch/Lever
Part Name: Master Massage Jet Internal
Tubs Used On: All
Used From: October 1997
Description: 14 port jet barrel. Black.
Part Name: Master massage body
Tubs Used On: All non Prestige spas
Used From: May 1996
Description: Jet body to hold insert
Part Name: Master Massage Jet Assembly Complete
Tubs Used On: All non prestige spas
Description: Jumbo hi flow jet located in all therapy seats
Pg 25
Jets & Accessories
CURRENT PARTS
Part Name: Air Control Body
Tubs Used On: All Spas with Neckjets
Description: Body portion to neck jet.
Part Name: Air Control Nut
Description: Nut portion to neck jet.
Part Name: Air Control Internal
Description: Flow regulator for neck jet.
Part Name: Air Control Cover
Description: Coverʼ internal to regulate flow to neck jet.
Pg 26
Jets & Accessories
CURRENT PARTS
Part Name: Air Control Compensator Ring
Description: Compensator Ring for all neckjets.
Part Name: Air Control Housing w/ O-Ring
Description: Housing and o-ring for all neck jets.
Part Name: Air Control Reducing Coupler
Description: Allows neck jet to be connected to 3/4” hose.
Part Name: Waterfall
Tubs Used On: Tundras
Description: Creates waterfall on all Tundras.
Pg 27
PVC Fittings
CURRENT PARTS
Part Name: Tee 2” Spg
Tubs Used On: All
Description: 2” Suction/Pressure hose T-style splitter
Part Name: Elbow 90 deg 2” Spg
Tubs Used On: All
Description: 90 degree connection for 2” ID suction/pressure
hose
Part Name: Tee 2” Soc
Manufacturer: IPEX
Description: Used to plumb Master massage jet
Part Name: Elbow 90 deg 2” Spg x Soc
Manufacturer: IPEX
Alternative Manufacturer: Fabco
Description: Used to plumb the orca jet
Pg 28
PVC Fittings
CURRENT PARTS
Part Name: Elbow 45 deg 2” Spg
Part Number: Ins-105650
Manufacturer: Ipex
Tubs Used On: All
Description: 45 degree connection for 2” ID suction/pressure
hose
Part Name: Reducer Bushing 1.5 x 1
Manufacturer: IPEX
Tubs Used On: All
Description: Used on therapy air/ arome therapy
Part Name: Reducer Bushing 2 x 1.5
Manufacturer: IPEX
Description: Used to plumb Orca jet
Part Name: Reducer Bushing 2” x 1”
Manufacturer: IPEX
Tubs Used On: All
Description: Used to plumb Master Massage Jet
Pg 29
PVC Fittings
CURRENT PARTS
Part Name: Coupler 1” Soc
Manufacturer: IPEX
Tubs Used On: Varies
Description: Used on air manifolds
Part Name: Plug 1” Spg
Manufacturer: IPEX
Tubs Used On: All
Description: To plug 1” Soc fittings or air manifolds
Part Name: Plug 3/4” brb
Tubs Used On: All
Description: Used to plug water manifold barb port.
Part Name: Adapter 90 deg 1/2” spg x 3/8” barb
Manufacturer: G & G Industries
Tubs Used On: All except 7ʼ Prestige
Used From: May 1999
Description: Used to plumb Master massage; Orca jet
Pg 30
PVC Fittings
CURRENT PARTS
Part Name: PVC Nipple 1”
Manufacturer: IPEX
Tubs Used On: All
Description: Used to plumb the Master massage jet,
aromatherapy and Therapy Air.
Part Name: PVC Nipple 1.5”
Manufacturer: IPEX
Description: Use to plumb orca jet
Part Name: Bleed Tee 3/4 B x 3/4 B x 3/8 B
Tubs Used On: All
Description: Part of self-bleed system
Part Name: Adapter 3/8 Barb x 1/4 Barb
Tubs Used On: All
Description: Part of self-bleed system
Pg 31
PVC Fittings
CURRENT PARTS
Part Name: Coupler 3/8” barb
Tubs Used On: All
Description: Use to couple air line together
Part Name: PVC Nipple 2”
Manufacturer: IPEX
Alternative Manufacturer: Rising Dragon
Country of Origin: Canada Alternative Origin: China
Tubs Used On: All
Description: Used to connect reflex torsion hose.
Approx. 4” long with tapered end.
Part Name: Adapter 1” Soc x 3/4” barb
Manufacturer: Waterways
Tubs Used On: All peak ozone
Description: Used to plumb peak ozone system
Part Name: Coupler 3/4” barb
Tubs Used On: All
Used From: 2000
Description: Used to couple 3/4” hose together.
Pg 32
PVC Fittings
CURRENT PARTS
Part Name: Check valve 2”
Tubs Used On: All
Used From:
Description: Backflow prevention valve
Pg 33
Specialty
CURRENT PARTS
Part Name: PCV Primer (Blue)
Manufacturer: Tektube
Tubs Used On: All
Description: Prime all PVC fittings, hoses, and nipples before
gluing
Part Name: PVC Glue (Red)
Manufacturer: Tektube
Tubs Used On: All
Description: Glue all PVC fittings to the hoses
Part Name: Clamp 7/32” x 5/8”
Part Number: ZOO-130301
Manufacturer: Murrayʼs
Tubs Used On: All
Description: Used on Peak and Self-bleed system
Part Name: Acrylic Starbar Rod
Part Number: TRM-126400
Manufacturer: GE Polymar
Tubs Used On: All Tubs w/Starbars
Description: Handle, and adds to the look of the tub.
Sold by the lineal foot.
Pg 34
Specialty
CURRENT PARTS
Part Name: Starbar Grommet
Part Number: TRM-126700
Manufacturer: OʼRyan Industries
Tubs Used On: All
Description: Creates a tight seal between the tub and starbar, and
creates a better finish
Part Name: Ball Valve 2”
Tubs Used On: All
Description: Used on primary 2” lines to isolate pumps & heater
from plumbing system.
Part Name: Jet Wrench Combo - WaterWay
Part Number: TLS-126653
Manufacturer: Algin
Tubs Used On: - parts only
Description: Used to service pulse/minipulse jets from WaterWay
Part Name: Bare Copper Ground Cable
Manufacturer: Noramco electric
Country of Origin:Canada
Tubs Used On: All
Description: Pump & heater ground cable
Pg 35
Specialty
CURRENT PARTS
Part Name: Jet Wrench Combo-Rising Dragon
Manufacturer: Algin Heating Products
Tubs Used On: All tubs with Rising Dragon jets
Description: Tool used to tighten the Rising Dragon jets.
Pg 36
Lippert Ozone
CURRENT PARTS
Part Name: CD ozone North American
Manufacturer: Del Industries
Tubs Used On: Option
Description: Ozone generator for North American Lippert ozone
system
Part Name: CD Ozone European
Manufacturer: Del Industries
Description: Ozone generator for European Lippert ozone system
Part Name: Gas mixing balls
Manufacturer: Fabco Plastics
Description: Mixing balls used in static mixing chamber.
Part Name: Clear Hose 3/8” x 9/16”
Tubs Used On: All
Description: Air Line Hosing; Roll Length = 300 ft.
Pg 37
Lippert Ozone
CURRENT PARTS
Part Name: Lippert jet body
Part Number: OZZ-300004
Description: Lippert ozone wallfitting distributes water back into
spa
Part Name: Lippert chamber
Description: Chamber used in Lippert system to mix ozone in
water
Part Name: Lippert wallfitting c/w Nut
Description: Wallfitting with Lippert chamber.
Part Name: Lippert grate
Description: Grate for inside spa for Lippert ozone system
Pg 38
Peak Ozone System
CURRENT PARTS
Part Name: Ozone Generator 50 Hz
Manufacturer: Purezone
Tubs Used On: Peak option package
Used From: May 1999
Description: Primary ozone generator for ozone system;
European only
Part Name: Circulation Pump European
Manufacturer: Little Giant
Description: To circulate water through the peak ozone
system; European only
Part Name: Adapter 1” Spg x 3/4” Barb
Description: Discharge from circulation pump
Part Name: Male adapter 1”
Manufacturer: IPEX
Description: Discharge from European circulation pump
Pg 39
Peak Ozone System
CURRENT PARTS
Part Name: Reducer 1/2” fpt x 3/4” spg
Manufacturer: IPEX
Description: Discharge from circulation pump
Part Name: Peak Cord Euro
Manufacturer: JJ Electronics
Tubs Used On: Part of option package
Used From: May 1999
Description: Power cord to spa pak from European peak
generator.
Part Name: Ozone Generator
Used From: May 1999
Description: Primary ozone generator for Peak system, North
American only.
Part Name: Circulation Pump
Manufacturer: Little Giant
Description: To circulate water through the peak ozone system.
North American only.
Pg 40
Peak Ozone System
CURRENT PARTS
Part Name: Reducing adapter 3/4” Mpt x 1” Soc
Manufacturer: IPEX
Description: Discharge from ciruclation pump, North American
only.
Part Name: Stainless Screen
Manufacturer: Western Canadian Screen
Used From: May 1999
Description: Mesh material to retain charcoal in chamber.
Part Name: PVC Pipe 3/4”
Manufacturer: IPEX
Used From: May 1999
Description: Charcoal Chamber
Part Name: Adapter 1” SPG x 3/8” B
Description: Each end of charcoal chamber
Pg 41
Peak Ozone System
CURRENT PARTS
Part Name: Activated Charcoal
Manufacturer: Van Waters & Rogers
Used From: May 1999
Description: Charcoal neutralizes ozone (50 gram required)
Part Name: Peak Cannister
Manufacturer: RMF
Used From: May 1999
Description: Steel vessel to retain mixing balls and to remove
ozone from water.
Part Name: 2” Ball Valve
Description: 2” valve to isolate peak system (suction side).
Part Name: Balance Barometer
Part Number: Ozz-300003
Description: Device used to prevent water from flowing to the
ozone generator.
Pg 42
Peak Ozone System
CURRENT PARTS
Part Name: Gear Clamp
Manufacturer: Murrayʼs
Used From: May 1999
Description: Clamp for teflon feed line.
Part Name: Check Valve 1/4”
Used From: May 1999
Description: To protect water back flow to ozone generator.
Part Name: Hose 2 3/8” Torsion Flex
Manufacturer: Tex Tube
Used From: May 1999
Description: 2 3/8” feed line from spa to suction on circ pump.
Part Name: Peak Jet WallFitting
Description: Wall fitting to accept ozone jet in spa.
Pg 43
Peak Ozone System
CURRENT PARTS
Part Name: Peak Jet Body
Description: Jet body to introduce ozone treated water to spa.
Part Name: Peak Jet
Description: Internal Portion of ozone jet in spa (drill to 3/4”
orifice).
Part Name: Mazzei Injector
Manufacturer: Mazzei Corporation
Used From: May 1999
Description: Injects ozone gas into fluid stream.
Part Name: Gas Mixing Ball
Manufacturer: Fabco
Used From: May 1999
Description: To increase retention time to treat the water with
ozone.
Pg 44
Peak Ozone System
CURRENT PARTS
Part Name: Suction 2” fitting 100gpm
Description: 2” suction fitting to feed ozone circ pump.
Part Name: Peak Suction 100gpm Cover
Description: Suction cover for Peak systems and Coyote tubs
Part Name: Peak Suction 100gpm Wallfitting
Description: Suction wallfitting for Peak systems and Coyote
tubs
Part Name: Peak Suction 100gpm Nut
Description: Suction nut for Peak systems and Coyote tubs
Pg 45
Peak Ozone System
CURRENT PARTS
Part Name: Circulation Pump Mount Plate
Manufacturer: Sunway
Tubs Used On: Retrofits to all peak circulation pumps.
Description: Used to secure Circulation pumps to cabinets.
Pg 46
Pumps
CURRENT PARTS
Part Name: Pump 4hp 230V 1 spd.
Tubs Used On: All North American Signatures and Legends.
Description: Pump 2 in all Signatures and Pump 3 in all Legends.
Part Name: Pump 4hp 230V 2 spd.
Tubs Used On: All North American Spas
Description: Used for pump 1.
Part Name: Pump 1.5Hp 110V 2 spd.
Tubs Used On: C10 spas
Description: Used in all C10 spas
Part Name: Pump 2Hp 230V 50hz 1spd.
Tubs Used On: All European
Used From: 2003
Description: Used only on European spas.
Pg 47
Pumps
CURRENT PARTS
Part Name: Pump 2hp 230v 2spd 50hz 2 1/2” intake
Used From: 2003
Description: Complete Assembly with Impeller
Part Name: Wet End Assembly 3.5Hp Euro
Description: Complete assembly with impeller
Part Name: Impeller Only 3.5Hp Euro
Description: Water intake and exhaust impeller (use with PRT118566)
Part Name: Pump union 2” nut-2”elbow
Tubs Used On: All
Description: Used on pressure side of pump. (O-ring PRT-120401
required)
Pg 48
Pumps
CURRENT PARTS
Part Name: Wet End Assembly 3 Hp
Tubs Used On: All Previous
Used From:
Part Name: Wet End Assembly 4Hp
Tubs Used On: All North American
Description: Complete Assembly With Impeller. (Executive)
Part Name: Shaft Seal Assembly Impellor Side
Tubs Used On: All Pumps
Used From: 1994
Description: Shaft seal assembly (to be used with PRT-120800)
Part Name: Shaft Seal Assembly Volute Side
Tubs Used On: All Pumps
Used From: 1994
Description: Shaft seal assembly to be used with PRT-120900
Pg 49
Pumps
CURRENT PARTS
Part Name: Pump union 2”nut
Tubs Used On: All
Description: Connects Pressure to Pump. (use with PAK-113197)
Part Name: Pump Union 2” Body
Tubs Used On: All
Description: Connects pressure to pump (use with PAK-113198)
Part Name: Pump Union 2” O-ring
Tubs Used On: All
Description: Connects pressure to pump (Use with Pak-113198
and PAK-113197)
Part Name: Pump union 2 1/2” nut
Tubs Used On: All
Description: Connects suction to pump (Use with PAK-113147)
Pg 50
Pumps
CURRENT PARTS
Part Name: Pump Union 2 1/2” Body
Tubs Used On: All
Description: Connects suction to pump (Use with PAK-113148)
Part Name: Pump Union 2 1/2” O-ring
Tubs Used On: All
Description: Connects suction to pump (Use with PAK-113147
and PAK-113148)
Part Name: Pump bleed plug adapter
Tubs Used On: All
Description: Part of self-bleed system.
Part Name: Pump mount plate (Requires two per pump)
Manufacturer: Stamco
Description: Plate mounted to pump to attach pump to pump
mounts. (Use with PAK-113121)
Pg 51
Pumps
CURRENT PARTS
Part Name: Rubber Pump Pad
Part Number: INS-105550
Manufacture: BC Belting
Tubs Used On: All
Used From: May 1998
Description: Vibration dampener at base of pump for all Coyote
spas.
Part Name: Pump Mount Kit
Description: Used to secure pump to cabinet. Use the one part in conjunction with pump mount plates for European pumps.
Pg 52
Heaters
CURRENT PARTS
Part Name: Remote Heater 5.5Kw Short Tube
Manufacturer: RMF
Used From: August 2004
Description: Used to replace curved Remote Heater.
Part Name: Remote Heater 3.6Kw Short Tube
Manufacturer: RMF
County of Origin: United States
Description: Used to replace curved Remote Heater.
Part Name: Heater Flat Gasket O-Ring
Manufacturer: RMF
Tubs Used On: All
Description: Create a seal between the Heater Barrel and the
heater tailpiece.
Part Name: Remote heater 5.5Kw element
Manufacturer: RMF
Description: Replacement element for 5.5 kw remote flow
through heaters.
Pg 53
Heaters
CURRENT PARTS
Part Name: Remote heater 3.6Kw element
Manufacturer: RMF
Description: Replacement element for 3.6 kw remote flow
through heaters.
Part Name: Heater “L” Gasket
Manufacturer: Hydro-Seal
Tubs Used On: All
Description: Gasket located between the heater and the pump.
Part Name: Heater Tail Piece 2” Spg
Tubs Used On: All
Description: Tail piece connection of heater.
Pg 54
Gecko Electronics
CURRENT PARTS
Part Name: Meta Pak
Manufacturer: Gecko
Description: Used in all North American Spas; Use with part#
Pak-112500
Part Name: Meta Pak European
Manufacturer: Gecko
Description: Used in all European Spas; Use in part# Pak-112502
Part Name: SSPA Coyote 5.5Kw
Manufacturer: Gecko
Tubs Used On: All North American Coyotes except C10
Description: Used for North American Coyote.
Part Name: SSPA Coyote European 3.6Kw
Manufacturer: Gecko
Tubs Used On: European Coyotes
Description: Used on European Coyotes only
Pg 55
Gecko Electronics
CURRENT PARTS
Part Name: SSPA Coyote 4 Kw
Manufacturer: Gecko
Tubs Used On: All North American C10
Description: Pak and heater used on all North American C10ʼs
Part Name: Topside extension cable 15ft.
Manufacturer: Gecko
Used From: N/A
Description: Used to extend location of topside away from spa
(maximum 100 ft.)
Part Name: Topside Euro Coyote (No overlay)
Manufacturer: Gecko
Tubs Used On: All European Coyotes
Description: Used in part# PAK-112306 or PAK112307 (European only)
Part Name: Topside Coyote (no overlay)
Manufacturer: Gecko
Tubs Used On: System with SSPA Pack
Used From: 1998
Description: Used in all Coyotes; use in part# Pak-112306 or
Pak-112307
Pg 56
Gecko Electronics
CURRENT PARTS
Part Name: Coyote Overlay 1 pump
Manufacturer: Gecko
Tubs Used On: Coyote C10, C20, C40
Description: Use in all European and North American
Coyotes in part# Pak-112301 or Pak-112304(Euro)
Part Name: Coyote Overlay 2 pump
Manufacturer: Gecko
Tubs Used On: Coyote C60
Description: Use in all European and North American
Coyotes in part# Pak-112301 or Pak-112304(Euro)
Part Name: Arctic Topside Control
Manufacturer: Gecko
Tubs Used On: With all Paks
Description: Half moon shaped topside with logo.
Part Name: Overlay Logo 3 pump
Manufacturer: Gecko
Tubs Used On: Parts
Description: Overlay for Topside 2 & 3 pump control
Pg 57
Gecko Electronics
CURRENT PARTS
Part Name: Topside European Logo
Manufacturer: Gecko
Tubs Used On: European Spas
Description: Topside with Logo; For European Spas only
Part Name: Dual Topside Splitter
Manufacturer: Gecko
Used From: N/A
Description: Allows spa to have 2 control panels
Part Name: Floating Remote Metapak
Manufacturer: Gecko
Description: European and North American Meta Pak;
Option only; Includes Infrared eye
Part Name: IR Sensor for Floating Remote
Manufacturer: Gecko
Used From: 2003
Description: Infrared eye for floaring remote metapak
Pg 58
Gecko Electronics
CURRENT PARTS
Part Name: North American Pak Service Kit
Manufacturer: Gecko
Tubs Used On: -parts only
Used From: -parts only
Description: Critical Parts and Tools for Pak repair.
Part Name: European Pak Service Kit
Manufacturer: Gecko
Tubs Used On: -parts only
Description: Critical Parts and tool kit for Pak repair; European
only
Part Name: Pocket Tek without palm pilot
Manufacturer: Gecko
Tubs Used On: Parts
Description: Communication Cartridge to add to any Palm Pilot
Part Name: Transformer 240 Volt Meta Pak
Manufacturer: Gecko
Description: Operates topside on European spas only
Pg 59
Gecko Electronics
CURRENT PARTS
Part Name: Transformer 120V Meta Pak
Manufacturer: Gecko
Description: Operates topside
Part Name: Motherboard META 3 pump
Manufacturer: Gecko
Description: Metapak Motherboard for 3 pump capability
Part Name: Plastic Stand off
Manufacturer: Gecko
Tubs Used On: Parts
Description: Used to install Motherboards
Part Name: Temperature Probe Meta pak
Manufacturer: Gecko
Tubs Used On: All
Description: Detects actual spa water temperature
Pg 60
Gecko Electronics
CURRENT PARTS
Part Name: Temperature Probe Extension 25”
Manufacturer: Gecko
Used From: N/A
Description: If longer cable required can be ordered
Part Name: Hi-Limit Meta pak
Manufacturer: Gecko
Tubs Used On: All
Description: Detects temperature shutting down heater at 119°F.
Part Name: Pressure Switch Cable 72”L
Manufacturer: Gecko
Tubs Used On: All
Used From: May 2000
Description: Pressure switch connection used with Remote FloThru heaters; Used in both MSPA and Meta
Part Name: Fuse (Pump) 30A
Manufacturer: Gecko
Tubs Used On: All
Description: Glass fuse 30 Amp used for the pumps.
Pg 61
Gecko Electronics
CURRENT PARTS
Part Name: Fuse (Ozone & Circ Pump) 5A - 250V
Manufacturer: Gecko
Tubs Used On: All
Used From: 1997
Description: Glass fuse for ozonator or circ pump operation.
Part Name: Fuse (Transformer) 1A - 250V
Manufacturer: Gecko
Tubs Used On: All
Used From: 1997
Description: Glass fuse used for protecting transformer
Part Name: Fuse (Ozone) Euro
Manufacturer: Gecko
Tubs Used On: Euro 50 Hz Systems CE Paks
Description: Glass fuse 5A 250 V ; also used for CE circ pump;
European only
Part Name: Fuse (Light) Euro
Manufacturer: Gecko
Description: Glass Fuse Slo Blo 2A 250V
Pg 62
Gecko Electronics
CURRENT PARTS
Part Name: Fuse (Light) 3A - 250V
Manufacturer: Gecko
Tubs Used On: All
Used From: 1997
Description: Glass fuse used for operation of spa lights.
Part Name: Fuse (Transformer) Euro
Manufacturer: Gecko
Description: Glass Slo Blo 500mA 250V; European only
Part Name: Fuse (Pump) Euro
Manufacturer: Gecko
Tubs Used On: Euro 50 Hz Systems
Description: 20 Amp 170VAC fuse for the operation of pumps 1,
2, and 3, although separate fuses required for each.
Part Name: Fuse (Blower)
Manufacturer: Gecko
Tubs Used On: All MSPA Meta paks
Used From: 1997
Description: Ceramic fuse either white or grey in colour. (10A /
250V)
Pg 63
Gecko Electronics
CURRENT PARTS
Part Name: Fuse (Blower) Euro
Manufacturer: Gecko
Description: Glass Fuse Slo Blo 6.3amp 250V; European only
Part Name: Female Heater Plug Receptacle Mini JJ
Manufacturer: Gecko
Tubs Used On: All
Description: Female Receptacle on pak Remote Flo-Thru heaters.
Part Name: Ozone Receptacle Meta Pak
Manufacturer: Gecko
Tubs Used On: All Meta Pak
Description: Female receptacle to plug ozone generator
into pak
Part Name: Plastic Corner Screws Meta
Manufacturer: Gecko
Description:To secure Meta pak to cabinet base, screw does not
come with washer.
Pg 64
Gecko Electronics
CURRENT PARTS
Part Name: Transformer Screws Meta Pak
Manufacturer: Gecko
Description:
Part Name: Locknut Screws Meta Pak
Manufacturer: Gecko
Description:To screw in cover of Meta pak.
Part Name: Pump Receptacle Meta Pak
Manufacturer: Gecko
Description: Female receptacle to plug pump into pak
Part Name: Circ Pump Receptacle Meta Pak
Manufacturer: Gecko
Description: Female receptacle to plug circulation pump into pak
Pg 65
Lighting
CURRENT PARTS
Part Name: Large light housing clear cover
Tubs Used On: All
Description: Clear plastic cover for large Arctic light
Part Name: Large light housing nut
Tubs Used On: All
Description: Nut for light housing
Part Name: Large light housing silver reflector
Tubs Used On: All
Description: Silver reflective back for large Arctic light
Part Name: Underwater Light Large complete package
Tubs Used On: All Arctic
Description: Large light with Arctic Logo, comes with silver
back and nut
Pg 66
Lighting
CURRENT PARTS
Part Name: Starbar housing
Tubs Used On: All
Description: Plastic end housing for starbar
Part Name: Northern lights Pkg
Part Number: LIT-104840
Tubs Used On: All Arctic option
Description: Contains master and slave LED light, comes with
synchronisation cord.
Part Name: Peyote lights
Tubs Used On: Coyote option
Description: LED light
Part Name: Arctic blue LED lights
Manufacturer:Sunway
Tubs Used On: All option
Description: LED light
Pg 67
Spa Accessories
CURRENT PARTS
Part Name: Ownerʼs Manual Coyote - Euro
Manufacturer: Screaming Color
Used From: Updated annually
Description: Information on your spa, included with spa;
European only
Part Name: Ownerʼs Manual Coyote
Description: Information on your spa included
Part Name: Ownerʼs Manual Arctic Spas - Euro
Description: Information on your spa, included with spa;
European only
Part Name: Ownerʼs Manual Arctic Spas
Tubs Used On: All
Description: Information on your spa, included with pack
Pg 68
Spa Accessories
CURRENT PARTS
Part Name: Meta Pak QRC
Manufacturer: Don-Rite
Tubs Used On: All
Description: Quick reference card to operate topside control
Part Name: Pillow 2002 (black)
Manufacturer: Polyrose Industries
Tubs Used On: All
Description: Compression fit Pillow; no Pins
Part Name: Aroma Therapy Pellets
Tubs Used On: All
Description: Aroma therapy scented pellets for the aroma therapy
canister
Part Name: Chrome Trim
Part Number: Ins-104700
Manufacturer: Spartan Plastics
Tubs Used On: All (Except Fibre Optic ʻ94 - ʻ96)
Used From: 1994
Description: Trim around the lip of the spa where it meets the
cabinet
Pg 69
Spa Accessories
CURRENT PARTS
Part Name: Equipment Door Insert
Manufacturer: Acklands
Tubs Used On: All
Description: Female attachment for equipment door.
Part Name: Equipment Door Screw
Manufacturer: Acklands
Tubs Used On: All
Description: Male attachment for equipment door.
Part Name: Allen Key 4mm
Manufacturer: Richilie Hardware
Tubs Used On: All
Description: Tool to open the equipment door on all spas
Part Name: Cover Lock (pkt-4)
Manufacturer: Sunstar
Tubs Used On: All Spas With Covers
Description: Allows customer to lock Sunstar cover.
Pg 70
Spa Accessories
CURRENT PARTS
Part Name: Covermate Arctic
Manufacturer: Leisure Concepts
Description: Accessory cover lifter for 8 door cabinet
Sorry
No Image Available
Part Name: Covermate Coyote
Manufacturer: Leisure Concepts
Description: Accessory cover lifter for Coyote. Similar to the
Covermate Arctic above, difference is coyote lifter attaches to base of spa.
Part Name: Cover lift nʼ lock
Manufacturer: Crystal Clear
Used From: 2002
Description: Locks and lifts cover
Part Name: Cover lift
Used From: 2002
Description: Lifts cover
Pg 71
Spa Accessories
CURRENT PARTS
Part Name: Cover lock
Used From: 2002
Description: Locks cover closed, padlock not included.
Part Name: Cover Saver
Description: Rubber feet on straps that prevents the seam of the cover
from tearing by supporting the weight from the bottom instead of the
center seam.
Part Name: Spa Mover Trailer
Part Number: SHP-126355
Manufacturer: Blue Falls Manufacturing
Tubs Used On: Accessory
Used From: N/A
Description: Trailer allows 1 person to deliver any spa
Part Name: Spa cart c/w Wheels
Used From: N/A
Description: Delivery cart c/w pneumatic tires; steering
mechanism
Pg 72
Spa Accessories
CURRENT PARTS
Part Name: Spa Cart - Frame only
Used From: N/A
Description: Share wheels among different frames
Part Name: Spa deck
Used From: N/a
Description: Takes up 8ʼ section fo trailer; 1 person can
unload spa off of trailer
Pg 73
Cabinet- Cedar
CURRENT PARTS
Part Name: Cedar 2x4x71 3/4ʼ Cabinet Rails
Part Number: WOD-129201
Manufacturer: Visscher Lumber
Tubs Used On: 8ft models
Description: Used to make 8ʼ cabinet wall
Part Name: Cedar 2x4x64 5/8ʼ
Part Number: wod-129250
Tubs Used On: 7ft models
Description: Used to make 7ʼ cabinet wall
Part Name: Cedar Radius Corners
Tubs Used On: All
Description: Connects 2x4 rails at corner of cabinet
Part Name: Cedar Transition Mould 8ʼ Cabinet
Tubs Used On: All
Description: Connects vertical 1x4; corner 1x2
Pg 74
Cabinet- Cedar
CURRENT PARTS
Part Name: Cedar Door Filler 8ʼ Cabinet
Tubs Used On: All
Description: Fills gap at top of door opening on cabinet
Part Name: Cedar Door Filler 7ʼ Cabinet
Manufacturer: Visscher
Tubs Used On: 7ʼ spas
Description: Fills gap at top of door opening on cabinet
Part Name: Cedar Transition Mould 7ʼ Cabinet
Tubs Used On: All 7ʼ
Description: Connects vertical 1x4; corner 1x2
Part Name: Cedar 1x2x27 3/4” for Cabinet Corner
Tubs Used On: All 8ʼ Cabinets
Description: Used to make rounded corner on cabinet
Pg 75
Cabinet- Cedar
CURRENT PARTS
Part Name: Cedar 1x2x23 5/8”
Tubs Used On: All 7ʼ, Husky, and Marmots
Used From: 1998
Description: Used for the corners of these cabinets.
Part Name: Cedar 1x6x23”
Description: Used as the tongue starter for the doors.
Tubs Used On: Coyotes
Description: Used as a Coyote door handle.
Tubs Used On: C10, C20
Description: Used as a door handle.
Pg 76
Cabinet- Cedar
CURRENT PARTS
Part Name: Cedar 1x3x20”
Tubs Used On: All 7, Husky, and Marmots
Used From: 1998
Description: Makes up two handles on each door.
Part Name: Cedar 1x6x11 1/2” T & G
Tubs Used On: Coyotes
Description: Used to make Coyote doors. This piece is also cut
down to make Coyote door Tongue and Groove starters.
Part Name: Cedar 1x4x23” Groove Start
Tubs Used On: All 8ʼ Spas
Description: Used as the groove start of the door.
Part Name: Cedar 1x4x23” Tongue Start
Description: Used as the tongue start on 8ʼ doors.
Pg 77
Cabinet- Cedar
CURRENT PARTS
Part Name: Cedar 1x6x23” T & G
Tubs Used On: All Arctic Spas
Description: The T & G for the doors.
Part Name: Cedar 1x3x23” Groove Start
Description: Used for the groove starter on the doors
Tubs Used On: C10, C20
Description: Used to make the corners of the cabinets.
Tubs Used On: All 8ʼ Cabinets
Used From: May 2004
Description: Makes up the corner of the cabinet.
Pg 78
Cabinet- Cedar
CURRENT PARTS
Part Name: Bisquit #10
Tubs Used On: All
Used From: 1998
Description: Used at various junctions in the cabinet.
Part Name: Cedar 1x4x29 3/4 T & G
Used From: May 2004
Description: Used as part of the wall of the cabinet.
Tubs Used On: All Arctic Spas
Used From: 1998
Description: Used as two of the handles on each door.
Part Name: Cedar 1x4x27 3/4
Tubs Used On: All C25, C40, and C60ʼs
Description: Used as part of the corner of the cabinet.
Pg 79
Cabinet- Cedar
CURRENT PARTS
Part Name: 2x3x71 3/4”
Description: Is the rails for all Coyote Cabinets; will be cut down
on some.
Part Name: Cedar 1x4x23 5/8” T &G
Used From: 1998
Description: The T & G used to build the cabinet wall.
Part Name: Replacement Door 7ʼ, Marmot and Husky
Tubs Used On: Parts
Description: Replacement door for 7ʼ 2002 cabinet Marmot and
Husky
Part Name: Replacement Door 8ʼ Cabinet
Tubs Used On: Parts
Description: Replacement door for 8ʼ cabinet; pre-2002 7ʼ cabinet
Pg 80
Cabinet- Cedar
CURRENT PARTS
Part Name: Summer Loovered Door Arctic (7ʼ spa)
Tubs Used On: Various
Description: Ventilation doors for extreme heat climates;
Use this part# for all models; specify type.
Part Name: Summer Loovered Door Arctic (8ʼ spa)
Tubs Used On: Various
Description: Ventilation doors for extreme heat climates;
Use this part# for all models; specify type.
Pg 81
Castcore Covers
CURRENT PARTS
Part Name: Castcore cover 7ft cedar
Tubs Used On: All 7ft models
Description: 5”-4” tapered cover
Part Name: Castcore cover 7ft grey
Description: 5”-4” tapered cover
Part Name: Castcore cover 7ft cedar skin
Description: vinyl cover skin
Part Name: Castcore cover 7ft grey skin
Description: vinyl cover skin
Pg 82
Castcore Covers
CURRENT PARTS
Part Name: Castcore cover 7ft inserts
Tubs Used On: All 7ft spas
Description: Insert for a 7ʼ cast core cover
Part Name: Castcore Cover 8ʼ cedar
Part Number:FIN-102050
Description: Vinyl skin over cast foam insert
Part Name: Castcore cover 8ft grey
Description: Vinyl skin over cast foam insert
Part Name: Castcore cover 8ft cedar skin
Description: Vinyl skin: silver inside, cedar brown outside
Pg 83
Castcore Covers
CURRENT PARTS
Part Name: Castcore cover 8ft grey skin
Description: Vinyl skin: silver inside, grey outside
Part Name: Castcore Cover 8ft inserts
Description: Cast foam insert
Part Name: Castcore Cover Marmot Cedar
Tubs Used On: Marmot only
Description: Vinyl skin over foam insert
Part Name: Castcore Cover Marmot Grey
Pg 84
Castcore Covers
CURRENT PARTS
Part Name: Castcore Cover Marmot Cedar Skin
Part Name: Castcore Cover Marmot Grey Skin
Part Name: Castcore Cover Marmot Insert
Description: Foam insert
Part Name: Castcore Cover Husky Cedar
Tubs Used On: Husky only
Pg 85
Castcore Covers
CURRENT PARTS
Part Name: Castcore Cover Husky Grey
Part Name: Castcore Cover Husky Cedar Skin
Part Name: Castcore Cover Husky Grey Skin
Part Name: Castcore Cover Husky Insert
Pg 86
Coyote Covers
CURRENT PARTS
Part Name: Coyote Cover C60 Cedar
Tubs Used On: C-60 only
Part Name: Coyote Cover C60 Cedar Skin
Part Name: Coyote Cover C60 Inserts
Pg 87
Coyote Covers
CURRENT PARTS
Part Name: Coyote Cover C20/25 Cedar
Part Name: Coyote cover C20 cedar skin
Pg 88
Coyote Covers
CURRENT PARTS
Part Name: Coyote Cover C20/25 Inserts
Pg 89
Coyote Covers
CURRENT PARTS
Part Name: Cover Clip
Tubs Used On: Coyote Covers
Description: Come in packages of 4 to lock down cover.
Spa Bags
CURRENT PARTS
Part Name: 7ft padded spa bag
Description: Padded weather-resistant spa bag with zippered
expansion on top to accomodate cover.
Part Name: 8ft padded spa bag
Description: Padded weather-resistant spa bag with zippered
expansion on top to accomodate cover.
Pg 90
Stereos
CURRENT PARTS
Part Name: Power Rectifier
Part Number:STR-100500
Manufacturer: Radius Power
Tubs Used On: All North American Arctic Spas with stereos
Description: Transfers power from 120v 12v
Part Name: Power Rectifier European
Part Number: STR-100501
Manufacturer: Radius Power
Tubs Used On: All European Arctic Spas with stereos
Description: Transfers power from 110V 12V
Part Name: Kenwood Amplifier
Manufacturer: Tri-Star Distributing
Tubs Used On: All Arctic Spas with stereos
Description: Amplifies sound
Part Name: Magnadyne Stereo
Manufacturer: Magnadyne Corporation
Tubs Used On: All Arctic Spas with Stereos
Description: Cd player/radio
Pg 91
Stereos
CURRENT PARTS
Part Name: Marine Antenna
Manufacturer: Tri-Star Distributing
Description: Increases reception for Radio
Part Name: Rolenstar Transducer
Manufacturer: Richtech Enterprises
Description: Speakers for the stereo
Part Name: Mounting Disc
Manufacturer: Richtech Enterprises
Description: mount for speaker
Part Name: Aura Bass Shakers
Manufacturer: Parts Express
Description: Speaker designed for bass
Pg 92
Stereos
CURRENT PARTS
Part Name: Aura Mounting Plate
Manufacturer: Stamco
Description: Mount for bass shaker
Part Name: Complete Stereo Door 8ʼ Cedar
Part Number: GAZ-128672
Tubs Used On: All 8ʼ Arctic Spas with stereos
Description: Cabinet door that houses stereo equipment.
Part Name: Complete Stereo Door 7ʼ Cedar
Part Number: GAZ-128673
Tubs Used On: All 7ʼ Arctic Spas with Stereos
Description: Cabinet door that houses stereo equipment
Part Name: Complete Stereo Door 8ʼ Gun Metal Grey
Part Number: MET-690020
Tubs Used On: All 8ʼ Arctic Spas with stereo
Pg 93
Stereos
CURRENT PARTS
Part Name: Complete Stereo Door 7ʼ Gun Metal Grey
Part Name: Complete Stereo Door 8ʼ Copper Vein
Part Name: Complete Stereo Door 7ʼ Copper Vein
Pg 94
Manifolds
PREVIOUS PARTS
Part Name: 2” Soc x Spg (2 port x 3/4” Barb)
Manufacturer: Pentair
Tubs Used On: All
Used Until: November 2001
Description: Used on the pressure side as a water to jet
junction; Replaced by part# Jet-112200
Tubs Used On: All
Tubs Used On: All
Part Name: 2” Soc x Soc (6 port x 3/4” Barb)
Tubs Used On: All
junction
Pg 95
Manifolds
PREVIOUS PARTS
Part Name: 2” Soc x Spg (4 port x 3/4” Soc)
Manufacture: Waterway
Tubs Used On: All
Used Until: December 1998
Part Name: 2” Soc x Soc (4 port x 3/4” Soc)
Tubs Used On: All
Part Name: 2” Soc x Soc (6 port x 3/4” Soc)
Tubs Used On: All
Tubs Used On: All
Pg 96
Manifolds
PREVIOUS PARTS
Part Name: 1 1/2” Soc x Spg (9 port x 3/4” Soc)
Tubs Used On: All
Used From: 1994
Tubs Used On: All
Tubs Used On: All
Used From: 1994
Used Until: February 1995
the air venturi
Part Name: 1” Soc (6 port x 3/8” Biscuit Style)
Tubs Used On: All
Used Until: April 2000
the air venturi
Pg 97
Therapy Air Systems
PREVIOUS PARTS
Part Name: Air Injector 3/8” Barbed
Tubs Used On: Therapy Air Option
Description: Used to inject air into spa from Therapy Air system.
Part Name: Multi-body Air Injector (shaker)
Manufacture: Waterways
Used Until: June 2000
Description: Assembly to emit air from Therapy Air System into
spa.
Part Name: Air Injector Snap Cap
Manufacture: G & G Industries
Used Until: January 2002
Description: Caps off air injector for aesthethic purposes.
(used with JET-109310)
Part Name: Air Injector (Long)
Manufacture: G & G Industries
Description: Jet for Air injector to emit air from Therapy Air
System
Pg 98
Therapy Air Systems
PREVIOUS PARTS
Part Name: Air Injector body 3/8” Barbed
Manufacturer: G & G Industries
Tubs Used On: All Therapy Air Option
Description: Body for Air injector to emit air from Therapy Air
System
Pg 99
Filters
PREVIOUS PARTS
Part Name: Filter Drink Cover
Manufacture: PolyRose
Used From: 1998
Part Name: Round Filter Drink Cover
Manufacture: Universal Urethane
Tubs Used On: All Topside Pressure Filter
Used From: 1994
Part Name: Filter Cover
Manufacture: Universal Urethane
Tubs Used On: Midnight Sun
Used From: 1997
Used Until: 1998
Part Name: Filter Base
Manufacture: Rainbow
Tubs Used On: All models with under cabinet pressure filters
Used From: 1994
Used Until: 2001
Description: Stand to hold pressure filter cannister
Pg 100
Filters
PREVIOUS PARTS
Part Name: Filter Cannister Assembly
Tubs Used On: All
Used Until: March 2000
Description: To hold the spa filter for spa filtration.
(Note: All glue connectors to this part with abs/pvc glue)
Part Name: Old Filter 2” 25 sq. ft.
Manufacture: Pentair
Tubs Used On: Service Only
Used Until: July 1997
Description: To hold the spa filter for spa filtration;
Replaced by part# Jet-108700
Part Name: Old Filter 2” 50 sq. ft.
Tubs Used On: All
Description: To hold the spa filter for spa filtration.
Part Name: Filter Lid Assembly
Tubs Used On: All
Used From: 1994
Description: Top for PRT-108700;
Pg 101
Filters
PREVIOUS PARTS
Part Name: Bleed Nut Rainbow Filter
Tubs Used On: All (Except Marmot)
Description: Air Release Bleed
Part Name: Bleed Nut O-Ring
Manufacture: BC Bearing
Tubs Used On: All (Except Marmot)
Description: O-ring for PRT-117000 (order seperately)
Part Name: Filter Lid O-Ring
Manufacture: BC Bearing
Tubs Used On: Previously All Models
Description: Oʼring for part# Prt-117200
Part Name: Filter Lock Ring
Tubs Used On: (Previously on All Models)
Description: Tightens Filter Lid Assembly onto Filter
Cannister; Used with part# Prt-117200
Pg 102
Filters
PREVIOUS PARTS
Part Name: Filter Bottom Flange
Description: Tighten Filter Cannister from bottom side
of spa; Used with part# Jet-109500
Part Name: 2” Black Strip Skimmer
Tubs Used On: Preciously all models
Description: Used to skim surface at waterline.
Part Name: Floating Lily Assembly
Description: Leaf skimmer; Used in part# Jet-109502
Part Name: Basket Lily W/restrictor
Description: Narrows the flow of water to prevent
cavitating; Used with part# Jet-109502
Pg 103
Filters
PREVIOUS PARTS
Part Name: Filter Skim Complete
Tubs Used On: All
Description: 2” inlet/outlet complete with cartridge,
basket and weir assembly; Replaced by part# Jet-112180
Pg 104
Jets & Accessories
PREVIOUS PARTS
Part Name: Micro Jet Flange
Tubs Used On: All
Used Until: May 2000
Description: Use with JET-109552, JET-109559, and either Ins103452 or Ins-103453.
Part Name: Micro Jet Barrel
Tubs Used On: When needed due to space restrictions
Description: Use with JET-109552, JET-109559, JET-109559
(used on small recesses)
Part Name: Micro Jet Barrel LS
Tubs Used On: All
Description: Use with JET-109552, JET-109559, and JET-109554
Part Name: Micro Jet Body
Tubs Used On: All
Description: Use with JET-109554, JET-109559, and either JET103452 or JET-109453
Pg 105
Jets & Accessories
PREVIOUS PARTS
Part Name: Micro Jet Spacer Ring
Tubs Used On: All
Description: Used in Jet-109552, Jet-109554, either Ins-103452
or Ins-103453
Part Name: Micro Cyclone Jet L-Gasket
Tubs Used On: All
Used From: May 2000
Description: Used witrh silicone to seal back side of Micro Jet
Body.
Part Name: Micro Cyclone Jet Body
Tubs Used On: All
Used From: May 2000
Description: Body-insert to accept Micro Jet Barrel.
Part Name: Micro Cyclone Thickness Compensator
Tubs Used On: All
Used From: May 2000
Description: Used in conjunction with body and nut to
compensate for uneven Fibreglass surface.
Pg 106
Jets & Accessories
PREVIOUS PARTS
Part Name: Micro Cyclone Jet Barrel Small
Tubs Used On: All (Where necessary)
Used From: May 2000
Description: Insert and functional face of Micro Jet; 2,5”
diameter
Part Name: Micro Cyclone Jet Barrel LS
Tubs Used On: All
Used From: May 2000
Description: Insert and functional face of Micro Jet.
Part Name: Micro Cyclone Jet Nut
Tubs Used On: All
Used From: May 2000
Description: Used to fasten jet in place in conjunction with
compensator ring
Part Name: Cyclone Jet Body
Tubs Used On: All
Description: Cyclone jet body, Our large rotating jet
Pg 107
Jets & Accessories
PREVIOUS PARTS
Part Name: Cyclone Thickness Compensator Ring
Tubs Used On: All
Description: Goes between the fibre glass and the nut to
compensate for variance in fibreglass thickness.
Part Name: Cyclone Jet Barrel
Tubs Used On: All
Description: Cyclone jet internals
Part Name: Cyclone Jet Nut
Tubs Used On: All
Description: Tightens the back (Fibreglass) side of the jet to the
tub
Part Name: Cyclone Jet L-Gasket
Tubs Used On: All
Description: Goes between the acrylic and the jet body on all
cyclones
Pg 108
Jets & Accessories
PREVIOUS PARTS
Part Name: Luxury Jet Body
Tubs Used On: All
Description: Use with JET-109704, JET-109703, and INS-103402
Part Name: Luxury Jet Flange
Tubs Used On: All
Description: Use with INS-103402, JET-109703, JET-109703,
and JET-109702
Part Name: Luxury Jet Barrel
Tubs Used On: All
Description: Luxury jet internals
Use with JET-109704, JET-109703, and JET-109702
Part Name: Luxury Jet L-Gasket
Tubs Used On: All
Description: Use with JET-109704, INS-103402, and JET-109702
Pg 109
Jets & Accessories
PREVIOUS PARTS
Part Name: Ozone Injection Jet
Tubs Used On: All
Description: Ozone injection jet for after market ozonators
Part Name: Poly Jet Body
Description: Jet body for old poly jets.
Part Name: Suction 2” Soc (Straight)
Tubs Used On: All
Description: Foot well suction for water filtration/drain system.
Used as suction for peak circ pump.
Part Name: Suction 2” Soc (90 Deg)
Tubs Used On: All
Description: Foot well suction for water filtration/drain system.
Pg 110
Jets & Accessories
PREVIOUS PARTS
Part Name: Diverter Jet Flange
Description: Use with JET-109407, JET-109405, and JET-109408
Part Name: Diverter Jet Gasket
Description: Use with JET-109406, JET-109407 and JET-109405
Part Name: Diverter Jet Body
Description: Use with JET-109406, JET-109407 and JET-109405
Part Name: DiverterValve 2” Black Notched
Tubs Used On: All
Used From: 1999
Description: Controls flow of water from one area of the spa to
another
Pg 111
Jets & Accessories
PREVIOUS PARTS
Part Name: Master Massage Jet Barrel
Tubs used on: All European non Prestige spas
Description: 14 port jet barrel. White with stainless steel trim.
Part Name: Master Massage Jet Barrel
Used Until: October 1997
Description And Function: 14 port jet barrel. Black with stainless
steel trim.
Part Name: Jet Mini Pulsator
Tubs Used On: Europe only
Description: White pulsating jet barrel (5 scallops)
Description: Black pulsating jet barrel (5 scallops)
Pg 112
Jets & Accessories
PREVIOUS PARTS
Description: Black pulsating jet barrel. (scalloped, with stainless
steel trim)
Description: White pulsating jet barrel. (scalloped, with.stainless
steel trim)
Part Name: Jet Roto Deluxe
Description: Directional spinning roto jet barrel. Black octagonal
face with stainless steel trim.
Part Name: Jet Pulsator
Description: Spinning Pulsator jet barrel. Black octoganal face
with stainless teel trim.
Pg 113
Jets & Accessories
PREVIOUS PARTS
Part Name: Jet Poly Deluxe
Tubs Used On: Europe Only
Description: Adjustable jet barel. White Scalloped face with
stainless steel trim.
Part Name: Jet Poly Deluxe
Description: Adjustable jet barrel. Black scalloped face with
Part Name: Jet Poly Deluxe Roto
Description: Rotating jet barrel. White scalloped face with
Part Name: Jet Poly Deluxe Roto
Description: Rotating jet barrel. Black scalloped face with
Pg 114
Jets & Accessories
PREVIOUS PARTS
Part Name: Jet Power Massage
Description: Multi part jet barrel with white scalloped face and
Part Name: Jet Power Massage
Description: Multi part jet barrel with black scalloped face
and stainless steel trim.
Part Name: Jet Internal Pulsator
Description: Spinning pulsator jet. White 2 port.
Part Name: Jet Internal Whirlie
Description: Spinning pulsator jet. White single port.
Pg 115
Jets & Accessories
PREVIOUS PARTS
Part Name: Jet Poly Roto
Description: Rotating directional jet barrel. White scalloped
face.
Part Name: Jet Poly Deluxe Pulsator
Description: Pulsating two port jet barrel White scalloped
face with stainless steel trim.
Part Name: Jet Pulsating Cluster
Description: Black dual port mini pulsator insert.
Part Name: Jet Luxury Adjustable White
Description: Adjustable directional jet. White with 5 scallops.
Pg 116
Jets & Accessories
PREVIOUS PARTS
Part Name: Jet Cyclone White
Description: Spinning single port jet barrel. White with 5
scallops.
Part Name: Jet Micro Swirl LS White
Description: Micro swirl jet barrel. White with 5 scallops.
Part Name: Jet Ozone Insert
Description: Single port insert
Part Name: Jet Wall Fitting Mini Black
Tubs Used On: All previous
Description: Wall fitting (acrylic side) for use with mini jets.
Pg 117
Jets & Accessories
PREVIOUS PARTS
Part Name: Jet Wall Fitting Mini White
Description: Wall fitting (acrylic side) for use with white mini
jets.
Part Name: Jet Body - Power Series
Tubs Used On: All
Description: Complete body with wall flange. 3/4” Soc x 3/8”
Barb
Part Name: Poly Jet Body
Description: Jet body for midsize poly jets. 3/4” Soc x 3/8” Barb
Part Name: Jet Body Mini
Description: Jet body for old style mini jets. 3/4” Soc x 3/8” Barb
Pg 118
Jets & Accessories
PREVIOUS PARTS
Part Name: 200 Gpm Suction 2” Soc
Tubs Used On: All
Used Until: September 2003
Description: Pump suction fitting with 2 1/2” by 2” reducer.
Part Name: Master massage old part #
Tubs Used On: All
Used From: 1999
Description: Large master massage, 14 port, black.
Part Name: Vertical Valve 2-port
Tubs Used On: Yukon & Avalanche
Description: Used to control neck jets in all Yukons & Avalanche
as well as in Tundras.
Part Name: Jet Body - Orca
Description: Power swim jet used on every 8ʼ spa.
Pg 119
Jets & Accessories
PREVIOUS PARTS
Part Name: Diverter Handle
Tubs Used On: All
Description: Topside manual lever to direct flow of water.
Part Name: Diverter OʼRing
Tubs Used On: All
Description: Seal under top side control between sleeve & cap.
Pg 120
PVC Fittings
PREVIOUS PARTS
Part Name: Coupler 2” Soc
Manufacture: IPEX
Tubs Used On: All
Description: Used to couple two sections of hose together.
Part Name: Elbow 45 2” Soc
Manufacture: IPEX
Tubs Used On: All
Description: 45° joint for 2” suction and pressure lines
Part Name: 2” Spg x 3/4” Barb Reducer
Tubs Used On: All
Description: Used to connect the ozone system to the
pressure system
Part Name: 2” x 3/4“ Reducer Bushing
Manufacture: IPEX
Tubs Used On: All
Description: Used in drain valve assembly
Pg 121
PVC Fittings
PREVIOUS PARTS
Part Name: 1” 45° Elbow Soc
Manufacture: IPEX
Tubs Used On: All
Description: Used to plumb 1” hose of pvc pipe
Part Name: 1” Tee Soc
Manufacture: IPEX
Tubs Used On: All
Description: Used to plumb 1” hose of pvc pipe
Part Name: 1” x 3/4” Reducer Bushing
Manufacture: IPEX
Tubs Used On: Various models
Used From: June 1994`
Description: To reduce 1” Soc to accept 3/4” hose
Part Name: 3/4” Coupler Soc
Manufacture: IPEX
Tubs Used On: All
Description: Joins 3/4” flex hose
Pg 122
PVC Fittings
PREVIOUS PARTS
Part Name: 3/4” 45 Elbow Soc
Manufacture: IPEX
Tubs Used On: All
Description: Elbow fitting to join 3/4” flex hose
Part Name: 3/4” Cap
Manufacture: IPEX
Tubs Used On: All
Description: To cap off 3/4” flex hose
Part Name: 3/4” barb x 3/4” Mpt Adapter
Manufacture: IPEX
Tubs Used On: All
Description: Replaced by part# Jet-106099
Part Name: 3/4” Plug
Manufacture: IPEX
Tubs Used On: All
Description: Used to plug 3/4 Soc or Hose fittings
Pg 123
PVC Fittings
PREVIOUS PARTS
Part Name: 3/4” Manifold Port Plug
Tubs Used On: All
Description: Used to plug water manifold barb port.
Part Name: 1” Soc x 1” Soc by 3/8” Barb
Tubs Used On: All
Description: Previously used on self-bleed system
Part Name: Elbow 90 2” Soc
Manufacturer: IPEX
Tubs Used On: All
Description: No longer in current production
Part Name: Bleeder 3/4”tee x 3/8” barb
Tubs Used On: All
Description: Part of self-bleed system.
Pg 124
PVC Fittings
PREVIOUS PARTS
Part Name: 3/4” ball valve
Tubs Used On: All
Description: Used to isolate Peak Ozone from the pressure side
of the circ pump.
Pg 125
Peak Ozone System
PREVIOUS PARTS
Part Name: Charcoal Chamber
Manufacture: Blue Falls Manufacturing
Used From: May 1999
Used Until: Jan 2002
Description: Asssembly designed to filter ozone off gas.
Part Name: 1/4” Barb x 1/4” Mpt Steel Fitting
Description: Inlet and outlet fitting on Balance Barometer.
Pg 126
Pumps
PREVIOUS PARTS
Part Name: 3HP Pump 230V 2 spd.
Description: Previously used as standard pump
Part Name: 3.1HP 50Hz Pump 230V 2 Spd
Manufacture: Ultrajet
Description: Previously used as standard pump; European only
Part Name: 1.5HP 230V Pump 2 spd.
Tubs Used On: All Pre - 1994 Spas
Used From: All Pre - 1994 Spas Used Until: All Pre - 1994 Spas
Description: Previously used as standard pump
Part Name: 3.1HP pump 230V 50Hz 1 spd.
Manufacture: Ultrajet
Description: Previously used as standard pump; European only
Pg 127
Pumps
PREVIOUS PARTS
Part Name: 2 Inch Union (set)
Manufacture: Ultra-Jet
Tubs Used On: European
Description: 2 piece set to connect spa pak to plumbing.
Part Name: Impeller Only CE 3.1 HP
Manufacture: Ultra-Jet
Tubs Used On: All European Previous
Used From: 1998
Description: Water intake component. (includes ceramic)
Part Name: Wet End Assembly 3 Hp
Used From:
Used Until:
Part Name: Wet End Assembly CE 3.1Hp
Manufacturer: Ultra-Jet
Description: Complete assembly with impeller.
Pg 128
Pumps
PREVIOUS PARTS
Part Name: 3.5HP pump 220V 50 Hz 1 spd.
Tubs Used On: All European Signatures and Legends.
Description: European only; Pump 2 on Signatures and Pump 3
on Legends.
Part Name: 3.5HP Pump 230V 50Hz 2 spd.
Description: European only; Pump 1
Pg 129
Heaters
PREVIOUS PARTS
Part Name: Heater Tube 5KW
Part Number: Prt-115650
Manufacture: Aquatemp
Tubs Used On: All
Description: 2” pack mounted heat tube 5.5 kw flow through
Tubs Used On: Spain International Spas
Description: 2” 2 Kw Pak mount straight flow through heater.
Tubs Used On: All International Spas
Description : 2” 3 Kw Pak mount heat tube; European only
Tubs Used On: All Norwegian Spas
Description: 2” 4 Kw Pak mount heat tube; European only
Pg 130
Heaters
PREVIOUS PARTS
Part Name: Heater Element 5.5Kw
Tubs Used On: All
Description: Replace standard 5.5 kw heater elements
Part Name: Remote Heater 2Kw TUV
Manufacturer: RMF
Tubs Used On: All UK Spas
Description: 2 1/8” barrel with 2Kw element; European only
Part Name: Remote Heater 5.5kw 240v
Manufacturer: RMF
Used Until: August 2004
Description: 2 1/8” barrel with 5.5Kw element. Used to replace
previous Aquatemp heater.
Part Name: Remote Heater 3.6Kw TUV
Manufacturer: RMF
Description: 2 1/8” barrel with 3.6Kw element; European only.
Used to replace previous Aquatemp heater.
Pg 131
Gecko Electronics
PREVIOUS PARTS
Part Name: TSPA-1 Pack
Manufacture: Gecko
Tubs Used On: Special Order Option
Description: Deluxe pak with 3” heat tube and infrared remote
capabilities.
Part Name: MSPA-1 Spa Pak CE With Heater Plug
Manufacture: Gecko
Tubs Used On: European spas only
Description: MSPA pak for international spas
Part Name: MSPA-1 Spa Pak With Heater Plug
Manufacture: Gecko
Tubs Used On: All
Description: MSPA Pak with female JJ plug for heater plug in
Part Name: Micro Pak Coyote
Manufacturer: Gecko
Tubs Used On: C10
Used to: April 2004
Description: Used in Coyote C10; 110V system
Pg 132
Gecko Electronics
PREVIOUS PARTS
Part Name: MSPA-1 Rectangular Topside
Manufacture: Gecko
Tubs Used On: Spa with MSPA pak
Used From: Sept 1998
Description: Rectangular topside for use with MSPA paks
(usually Retro Fits)
Part Name: Topside control
Manufacturer: Gecko
Description: Used for SSPA; for retrofit other manufacturerrs
Part Name: Arctic Spa Overlay
Manufacturer: Gecko
Description: Replacement Overlay for Square Topside Control
for Arctic
Part Name: Motherboard Chip - 3 Minute European
Manufacture: Gecko
Tubs Used On: All in Remote Heaters
Description: Black software chip enabling system to run for 3
minutes after heaters shuts down.
Pg 133
Gecko Electronics
PREVIOUS PARTS
Part Name: Transformer 120 Volt
Manufacture: Gecko
Tubs Used On: All North American MSPA paks
Used From: 1997
Description: Operates topside.
Part Name: Transformer 240 Volt
Manufacture: Gecko
Tubs Used On: All Spas with MSPA CE paks
Description: Operates topside.
Part Name: Motherboard Chip - 3 Minute
Manufacture: Gecko
Tubs Used On: All in remote heaters
Used From: Fall 1999
Description: Black software chip enabling system to run for 3
minutes after heaters shuts down.
Part Name: Motherboard TSPA
Manufacture: Gecko
Tubs Used On: Tspa Pak for selected dealers
Description: Deluxe pak with capabilites of infared remote
control also has 3” heat tube.
Pg 134
Gecko Electronics
PREVIOUS PARTS
Part Name: Motherboard MSPA-1 BF3
Manufacture: Gecko
Tubs Used On: All
Description: MSPA Pak board identified by counting 9 relays on
board
Part Name: Motherboard MSPA-1 BF2
Manufacture: Gecko
Tubs Used On: All unless specified
Description: Upgraded version of MSPA easily identified by
counting 8 black relays on board.
Part Name: Motherboard MSPA (Old Version)
Manufacture: Gecko
Tubs Used On: All unless specified
Used From: May 1997
Description: Original Motherboard easily identified by counting
10 black relays on board.
Part Name: Motherboard MSPA-1 BF3 CE
Manufacturer: Gecko
Tubs Used On: All International
Used From: Spa Serial #ʼs 10,000+
Description: MSPA Pak board with circ pump and various
options used for internationl spas
Pg 135
Gecko Electronics
PREVIOUS PARTS
Part Name: Temperature Probe
Manufacture: Gecko
Tubs Used On: All
Description: Probe found in thermowell of spa to detect actual
spa water temperature; MSPA
Part Name: High Limit Sensor Cable
Manufacture: Gecko
Tubs Used On: All
Used From: 1997
Part Name: Hi-limit Sensor Cable (36”L)
Manufacture: Gecko
Tubs Used On: With MSPA-1 Pak
Part Name: Hi-limit Sensor Cable (48”L)
Manufacture: Gecko
Used Until: September 2000
Pg 136
Gecko Electronics
PREVIOUS PARTS
Manufacture: Gecko
Tubs Used On: All
Description: Pressure switch connection used with MSPA-1 paks
with attached heater barrel.
Manufacture: Gecko
Tubs Used On: All
Used From: May 1999
Description: Pressure switch connection used with Remote FloThru heaters.
Manufacture: Gecko
Tubs Used On: All
Description: Pressure switch connection used with Eon Firecell
and Remote Flo-Thru heaters.
Part Name: Fuse (Pump) 25A - 300V
Manufacture: Gecko
Tubs Used On: All
Description: Green and white fuse used for pump1 and pump2
operation.
Pg 137
Gecko Electronics
PREVIOUS PARTS
Part Name: Fuse (Pump) Old Version
Manufacture: Gecko
Tubs Used On: All
Description: Green and white fuse used for pump1 and pump2
operation.
Part Name: Heater Wire
Manufacture: Gecko
Tubs Used On: Paks without heater plug
Description: 2 black wires making connection for heater from
board to element.
Part Name: TSPA-1 Topside Control
Manufacturer: Gecko
Tubs Used On: Existing Spa with TSPA paks
Used Until: -parts only
Description: Operation of TSPA pak
Part Name: Hi-Limit Sensor Cable 72”L
Manufacturer: Gecko
Used Till: December 2000
Description: Detects temp shutting down heater at 119°F.
Pg 138
Gecko Electronics
PREVIOUS PARTS
Part Name: Heat Tube Legs
Manufacturer: Gecko
Tubs Used On: All Current
Description: Legs used to mount Eon Firecells or remote heat
tube barrels.
Part Name: Motherboard Cover (Plastic) MSPA
Manufacturer: Gecko
Tubs Used On: Spas With MSPA Paks
Used From: 1997
Description: Protective Impact Cover
Part Name: Northern Lights Adapter MSPA
Manufacturer: Gecko
Used Until: -parts only
Description: Allows existing spas in MSPA paks the Northern
Lights option
Part Name: Top Side Fasteners
Manufacturer: Gecko
Tubs Used On: All
Used From: 1997
Description: Used to tighten topside control to acrylic.
Pg 139
Balboa Electronics
PREVIOUS PARTS
Part Name: Fuse (20 Amp) Power Input
Manufacture: Balboa
Tubs Used On: BF50 & BF75 Boards
Used From: 1991
Description: Orange and white fuse used to power up pump
Part Name: Terminal Block
Manufacture: Balboa
Tubs Used On: All
Used From: 1991
Description: Black in colour; for making terminal connections
on install of board.
Part Name: Terminal Block (Power Input)
Manufacture: Electronic Connections
Tubs Used On:
Used From: 1991
Description: White Terminal strip on Board used for wire up
from GFCI breaker.
Part Name: Motherboard B100 (Revision1A)
Manufacture: Balboa
Tubs Used On: Dual Pump System
Used From: 1991
Used Until: Replaced By
BF100(R1C)
Description: Used with topside with ribbon style plugin.
Pg 140
Balboa Electronics
PREVIOUS PARTS
Part Name: Motherboard B100 (Revision1C)
Manufacture: Balboa
Tubs Used On: Dual Pump Systems
Used From: Replacement for B100(R1A)
Used Until: Replaced By B100(R2A)
Description: Board with pin style ribbon plug for topside control.
Manufacture: Balboa
Used From: Replacement for B100(R1C)
Used Until: Replaced By B100 (R2B)
Description: Board with telephone jack plug for topside.
Part Name: Motherboard B100 (Revision2B)
Manufacture: Balboa
Used From: Replacement for B100(R2A)
Used Until: Replaced By B100(R3A)
Description: Board with telephone jack plug for topside.
Manufacture: Balboa
Tubs Used On: Dual Pump Systems Signature Series
Used From: 1996
Used Until: Replaced By Gecko
Description: Latest version for BF100 pak; duals speeds on both
pumps.(option for fibreoptics)
Pg 141
Balboa Electronics
PREVIOUS PARTS
Part Name: Motherboard BF-25 (Revision1A)
Manufacture: Balboa
Tubs Used On: 300 Model
Used From: 1991
Description: 110V system with 1kw element. Used with KB-25
topside.
Part Name: Motherboard BF-50 (Revision1A)
Manufacture: Balboa
Tubs Used On: Single Pump Systems
Used From: 1991
Description: 240V system used with BF50 analog topside.
Part Name: Motherboard BF-75 (Revision1C)
Manufacture: Balboa
Tubs Used On: Single Pump Systems
Used From: 1991
Description: 240V system used with BF75 digital control.
Part Name: Topside Control B100
Manufacture: Balboa
Tubs Used On: Dual Pump Systems Signature Series
Used From: 1991
Description: Ribbon - B100(R1A+R1C); Telephone jack - BF100
(R2A, R2B, + R3A)
Pg 142
Balboa Electronics
PREVIOUS PARTS
Part Name: Topside Control BF-75
Manufacture: Balboa
Tubs Used On: BF75 Electrical System
Used From: 1991
Description: Rectangular topside with digital temp readout.
Part Name: Topside Control KB-25
Manufacture: Balboa
Tubs Used On: 300 Model
Used From: 1991
Description: 110V system digital pak.
Part Name: Topside Control KB-50
Manufacture: Balboa
Tubs Used On: KB-50 Electrical Paks
Used From: 1991
Description: Rectangular Duplex digital topside with knob
control for temp.
Part Name: Overlay (Topside) BF-75
Manufacture: Balboa
Used From: 1991
Description: Standard digital control topside.
Pg 143
Balboa Electronics
PREVIOUS PARTS
Manufacture: Balboa
Used From: 1991
Used Until: 1995
Description: Used with topside using temp. arrows to set standard
and economy modes.
Manufacture: Balboa
Used From: 1996
Description: Used with topsides having mode button on key pad.
Part Name: Overlay (Topside) KB-50
Manufacture: Balboa
Tubs Used On: BF50 topsides
Used From: 1991
Description: Rectangular topside with knob control for temp
setting.
Part Name: Transformer 240V
Manufacture: Balboa
Tubs Used On: BF100 Electrical Pak
Used From: 1991
Description: Conversion of power on board to enable operation
of topside.
Pg 144
Balboa Electronics
PREVIOUS PARTS
Part Name: Transformer 120V
Manufacture: Balboa
Tubs Used On: BF75 and BF50 Boards
Used From: 1991
Description: Conversion of power on board to enable operation
of remote parts. (pump, blowers, etc.)
Part Name: Sensor (Freeze Protection)
Manufacture: Balboa
Tubs Used On: All Balboa Systems
Used From: 1995
Used Until: Late 1996
Description: If temp dropped below 40°F sensor would detect
and start pumps on low speed.
Part Name: Assembly Kit (Hi-Limit Sensor)
Manufacture: Balboa
Tubs Used On: All Balboa Paks
Used From: 1991
Description: Hi Limit / Temp Probe assembly as one unit.
Part Name: Flow Sensor Wire
Manufacture: Balboa
Tubs Used On: All Balboa Paks
Used From: 1991
Description: Pressure switch wire used with Balboa parts to
activate pressure switch.
Pg 145
Balboa Electronics
PREVIOUS PARTS
Part Name: Fuse (3 Amp) Power Input
Manufacturer: Balboa
Tubs Used On: All
Used From: 1991
Description: 3 Amp spa light fuse can be used on both Gecko and
Balboa Systems.
Pg 146
Lighting
PREVIOUS PARTS
Part Name: Underwater Light Small
Manufacture: Oʼryan Industries
Tubs Used On: All
Used From: 1994
Used Until: march 2002
Description: Housing for the under water light; Currently standart
in Coyote Spa line
Part Name: Light Lens (Red)
Tubs Used On: All
Used From: 1994
Description: Colored underwater light lens cover
Part Name: Light Lens (Purple)
Tubs Used On: All
Used From: 1994
Part Name: Light Lens (Amber)
Tubs Used On: All
Used From: 1994
Pg 147
Lighting
PREVIOUS PARTS
Part Name: Light Lens (Blue)
Tubs Used On: All
Used From: 1994
Part Name: Light Lens (Green)
Tubs Used On: All
Used From: 1994
Part Name: Starbar Light Housing
Tubs Used On: All with starbar
Used From: 1994
Description: Holds the light bulb and color lens to the starbar
Part Name: Starbar 5 Color Pack
Tubs Used On: All
Used From: 1994
Description: Colored starbar light lens inserts
Pg 148
Lighting
PREVIOUS PARTS
Part Name: Spa Lightbulb Clear
Manufacture: Sunray Lighting Inc.
Tubs Used On: All
Used From: 1994
Description: Starbar bulb
Part Name: Northern Lights MSPA
Manufacturer: Gecko
Used Until: Current
Description: Digital lighting hooks up to both lights in MSPA
Part Name: Spa Lightbulb Blue
Manufacturer: Sunray Lighting Inc.
Tubs Used On: All
Used until: January 2003
Description: Used in starbar and underwater lgiht standard
Part Name: Starbar Light Housing
Manufacturer: SunWay
Tubs Used On: Northern lights option
Description: Holds the light bulb at starbar
Pg 149
Spa Accessories
PREVIOUS PARTS
Part Name: Pillow pre 2001
Manufacture: Polyrose Industries
Tubs Used On: All Requred
Description: Pillow/Head rest; no suction cups; with single pin
Part Name: Cover Lock (pkt-4)
Manufacturer: Sunstar
Tubs Used On: All Spas With Covers
Used Until: 2002
Description: Allows customer to lock Sunstar cover.
Pg 150
Cabinet Cedar
PREVIOUS PARTS
Part Name: Replacement Door 4 Door Cabinet
Manufacture: Blue Falls Manufacturing
Tubs Used On: All
Description: Insulated door to replace door on 4 door cabinet
Tubs Used On: C10, C20, C40, C60
Description: Used as part of the door.
Pg 151
Specialty Tools
PREVIOUS PARTS
Part Name: Jet Wrench
Description: Can be used on old Waterways Poly jets.
Part Name: Jet Wrench Combo - Waterway
Manufacture: Algin
Used Until: Current
Description: Used to service pulse/minipulse jets from
WaterWay
Part Name: Jet Wrench Combo - Pentair
Manufacture: Algin
Description: Used to service cyclone/micro jets
Part Name: Jet Wrench Micro
Description: Micro jet wrench.
Pg 152
Specialty Tools
PREVIOUS PARTS
Part Name: Cyclone Jet Wrench
Used From: - parts only
Used Until: - parts only
Description: Used to service cyclone jets
Part Name: Screw Driver (#2 Robertson)
Manufacturer: Greggʼs Distributing
Tubs Used On: All non-Canadian Spas
Used From: 1994
Description: For access to all normal access doors on the
spa; Except equipment doors
Part Name: #1 Robertson Speed Bit
Manufacturer: Papco
Tubs Used On:
Used From:
Used Until:
Description: For cover locks.
Part Name: #2 Robertson Speed Bit
Manufacturer: Papco
Tubs Used On:
Used From:
Used Until:
Description: Tool to open all access doors other than equipment
door
Pg 153
Specialty Tools
PREVIOUS PARTS
Part Name: Ozone Flowmeter 2.5L
Manufacturer: Erie Filter Meter
Tubs Used On: Accessories
Used From: N/a
Used Until: N/a
Description: Pensinol Flowmeter
Pg 154

Dealer Parts MASTERspa.indd

Transcription

Similar documents

A Valumax System Saves You Money and Time... Everyday!

Manufacturer of Kedel

Pegasus final w industries

we build from solid hardwoods and we build to - bath-in

Pegasus Summary offset copy

YOUR HOT TUB HAVEN AWAITS

to newsletter. - Seasonal Specialty Stores

Pharmaceutical Facility Process Piping Installation

Manufacturer Profile - Jerr-Dan

cobra 142gtl om parts list