Brochure - Gemini Home Show

Transcription

The Gemini
Product Description
Do you require assistance with walking up the stairs or are the groceries and laundry becoming so hard to manage
that you are thinking of moving? Our budget model lift, the Gemini may be the solution to your problem.
Custom built in Australia, the Gemini is ideal for two storey homes that have a verandah or patio.
Supplied as a complete unit the lift is cladded in a white or cream colourbond making it cost effective as little
building works are associated with it.
In fact this environmentally friendly lift is so easy to install it can be fitted and up and running in a matter of one to
two days.
Specification
Manufactured in:
Australia by an Australian owned family company
Standard Compliant:
AS1735 part 17
Application:
Residential use only
External installation only
Installation:
Crane in, dismantle or man handle
The lift is complete with a cladded tower of folded white or cream colourbond panels
Drive system:
Water Hydraulic with direct acting cylinders on each side of the lift car
Supply Voltage:
240volt 15amp
Travels:
Up to 3.5m
Lift Speed:
Lifting Capacity:
Up to 0.083m/sec
250kg ( 2 people including 1 in a wheel chair)
Lift Tower:
Built as a free standing unit, weighing approx 350kg the lift is fabricated from aluminium
and fitted with folded white or cream colourbond panel sections providing a smooth
flush surface within the lift shaft.
To complete the tower a colourbond hat is fitted to the top to cover the cylinder extension
as well as providing weatherproofing and ventilation.
A polycarbonate translucent panel is fitted to one side of the shaft to provide natural
lighting to the lift car.
Weatherproof awnings are fitted above the landing doors as required
Pit Depth:
80mm
Car Size:
Individually built to the customers requirements up to a maximum floor space of 1.3m2
Standard Size - 900mm wide x 1300mm deep x 2000mm high with a clear door opening of 820mm
Car Configuration
Single entry
Dual entry - through car
Car Fit out:
The lift car walls are internally lined with flat white colourbond whilst the floor is fitted with an
indoor/outdoor carpet. The lift car is absent of a ceiling.
Standard features are
* Stainless steel handrail
* Non - slip floor covering indoor/outdoor carpet
* Emergency telephone recessed into a box
* Two recessed down lights
* 2 x Photo electric sensors across the door entrance
Landing Doors:
Fabricated from aluminium the metal doors are lined on the inside with colourbond leaving
the frame exposed to the outside. Th swing actions doors are 1850mm in height and
860mm in width.
All doors are fitted with mechanical electric interlock, an externally mounted fully adjustable automatic
door closer, pull handle and a mesh vision panel.
Automatic door operators and sensor operation are available as an option.
12 Achievement Crescent, Acacia Ridge, QLD 4110
Ph - 3274 4211. Fax 3274 5543
wwwww.aussielifts.com.au
Australian Owned
Australian Made
Australian Designed
The Gemini
Stations:
Mounted on a stainless steel plate with protruding buttons the electric controls are automatic
in operation
Key lockable at upper & lower landing to prevent unwanted users
Illuminated indications
Weatherproof stations at each landing
Safety features:
* Key lockable push button controls
* Emergency stop button in the lift car
* Back up battery power for lighting & lowering of the car
* Emergency manual lowering facility provided in the machine cabinet
* A non-reversal timer of 5 seconds is fitted to allow the rider in the car to open the landing
door once the car has stopped without the threat of the car being called by another
operator.
Machine Cabinet:
Fabricated from metal and painted the machine cabinet is suitable for external or internal
installation.
The cabinet is fitted with a key lockable door and contains the hydraulic power unit,
hydraulic control valves, electrical control board, emergency power supply and cabinet light.
The emergency tools and instructions are located within this cabinet.
The cabinet size is 1800mm in height x 605mm in width x 335mm in depth
Maintenance:
We recommend that the lift be serviced at no greater intervals than 12 months. This will
keep the lift in a safe and serviceable condition.
Warranty:
12 months on all parts and labour excluding misuse and/or malicious damage.
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or
refuse any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Apollo
Product Description
Whether you are building or renovating, the Apollo can be built and finished in a style that suits your home and décor'.
This lift is quiet, affordable, versatile, low in maintenance and can be installed either internally or externally.
Powered by water hydraulic cylinders the lift comes complete with its own self supporting tower and doors. This is a huge
saving as it eliminates the time and costs associated with building a conventional lift tower.
Specification
Manufactured in:
Standard Compliant:
AS1735 part 17
Application:
Residential use only
Installation:
Internal or external
Crane in or dismantle
The lift complete with tower can be fitted to an owner's supplied shaft or
have sheeting attached directly to the tower. Cladding to be in compliance
with the lift code.
Drive System:
Supply Voltage:
Water Hydraulic with direct acting cylinders on each side of the lift car
240volt 15amp
Travels:
2 levels - maximum travel distance 3.5 metres
Speed:
Lifting Capacity:
Lift Operation:
Rated speed .0133m per second
Automatic. Lift will operate by one press of the button.
Lift Tower:
Built as a free standing, self supporting unit, the aluminium tower comes complete with
doors, door frames, flashings, electrical wiring and hydraulic cylinders
No load bearing walls are required.
Pit Depth:
80mm
Car Size:
Individually built to customers requirements up to a maximum floor space of 1.3sqm
Standard Model - 900mm wide x 1300mm deep & 2000mm high with a clear door
opening of 820mm
Car Configuration:
Single entry
Dual entry - Through car
Car Fitout:
The lift car is available in a number of finishes, the most popular being the smooth white
colourbond interior trimmed with extruded aluminium. Custom finishes such as timber, MDF
and stainless steel are also available.
Standard features include:
* Non-slip floor covering indoor/outdoor carpet
* Emergency telephone
* 2 beam photo electric sensors across the door entrance
Landing Doors:
Fitted with a swing action door the Apollo can be supplied with a variety of
door styles:
* Redicote flush door
* Corinthian - Impression
* Metal
* Glass
All doors are fitted with a mechanical electric interlock, an adjustable automatic
door closer and handle. Glass view panels are available in the redicote and metal
doors. Automatic door operators are available as an option
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Apollo Continue
Stations:
Mounted on a stainless steel plate the control buttons are either available in a protruding
square button for ease of use or a flush mount round stainless steel for style.
* The electric controls are automatic in operation
* Key lockable to prevent unwanted users
* Illuminated indications
* Emergency stop button
* Weatherproof stations are available for external landing stations
Safety features:
* Non - slip floor covering indoor/outdoor carpet
* Emergency Telephone
* Key lockable push button controls.
* Emergency stop button in the lift car
* Photo electric sensors across the door entrance
* Emergency lowering facility provided in the machine cabinet
* A non-reversal timer of 5 seconds is fitted to allow the rider in the car to
open the landing door once the car has stopped without the threat of the
car being called by another operator.
Machine Cabinet:
Fabricated from metal and painted the machine cabinet is suitable for external or
internal installation
Fitted with a key lockable door, the machine cabinet contains the hydraulic power
unit, hydraulic control valves, electrical control board, emergency power supply
and lowering lever. The emergency tools and instructions are located within
the cabinet
Maintenance:
We recommend that the lift be serviced at no greater intervals than 12
months, this will ensure the lift is maintained in a safe and reliable
condition
Warranty:
12 months on all parts and labour excluding misuse and/or malicious
damage.
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or refuse
any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Endeavour
Product Description
The first in our oil hydraulic range the Endeavour offers the extra weight capacity and the option of two lift car size Standard and Deluxe.
This makes the lift perfect for situation were size is not an issue but the bank account is.
Specification
Manufactured in:
Standard Compliant:
AS1735 part 18
Application:
Residential
Installation:
The lift complete with it own tower can be fitted to an owner supplied shaft or have direct
cladding. Cladding is to be in compliance with the lift code.
No load bearing walls are required.
Drive System:
Supply voltage:
Dual Oil Hydraulic Cylinders one each side of the lift car.
240 volt 16 amp
Travels:
Standard model - up to 4 metres
Deluxe model - up to 4 metres
Lift Speed:
Lifting Capacity:
Lift Operation:
Lift Tower:
Built as a free standing self supporting unit, the tower comes complete with doors,
door frames, flashing, electrical wiring and hydraulic cylinders
Pit Depth:
100mm
Car Size:
Standard Model - 900mm wide x 1300mm deep & 2000mm high with a clear door opening of
820mm.
Deluxe Model - 1100mm wide x 1400mm deep & 2000mm high with a clear door opening of
870mm
Car Configuration:
Single entry
Car Fitout:
The lift car is available in a number of different finishes from the more stream line look of
colourbond capped panels using shadow lines and butt joins to the more traditional look of
Tasmanian Oak trimmed with timber moulding. For those that would like to add their own taste to
the lifts car decor' we also offer vinyl and stainless steel as an option.
Standard features included
* Non-slip floor covering indoor/outdoor carpet
* Emergency telephone mounted into a recessed box
* Two to four recessed down lights
Landing Doors:
Fitted with swing action doors the Endeavour can be supplied with a variety of door styles:
* Redi-cote flush door
* Metal
* Glass
All doors are fitted with mechanical electric interlock, an adjustable automatic door closer and a pull
handle. Glass view panels are provided in the flush and metal doors.
Automatic door operators are available as an optional extra
Ph - 3274 4211. Fax 3274 5543
www.aussielifts.com.au
Australian Owned
Australian Made
Australian Designed
The Endeavour - Continue
Stations:
Mounted on a stainless steel plate with flush stainless steel buttons the electric controls are
automatic in operation
* Option available to key lock one or all landings to prevent unwanted users
Safety features:
* A non-reversal timer of 5 seconds is fitted to allow the rider in the car to open the landing door
once the car has stopped without the threat of the car being called by another operator.
Optional feature - The hydraulic pump is controlled by a variable voltage variable frequent drive
that provides a smooth acceleration giving unsurpassed passenger comfort in a hydraulic lift.
Machine Cabinet:
Fabricated from metal and painted the machine cabinet is suitable for external or internal
installation.
The cabinet is fitted with a key lockable door and contains the hydraulic power unit, hydraulic
control valves, electrical control board, emergency power supply and cabinet light. The
emergency tools and instructions are located within this cabinet.
Maintenance:
We recommend that the lift be serviced at no greater intervals than 12 months, this will ensure
the lift is maintained in a safe and reliable condition.
Warranty:
12 months on all parts and labour excluding misuse and/or malicious damage.
All changes must be in compliance with the lift code and the manufacturer
reserves the right to approve or refuse any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Phoenix
Product Description
If overhead space is a problem or you are looking for a lift to service three levels than the versatility of the Phoenix
eliminates the need for traditional restraints that are associated with a residential lift - Load bearing walls, overhead
height and large pits.
Available in a number of finishes the Phoenix offers flexibility in its cosmetic appearance whilst pushing the boundries in
performance.
Specification
Manufactured in:
Standard Compliant:
AS1735 part 18
Application:
Residential
Installation:
The lift complete with tower can be fitted to an owner's supplied shaft or
have sheeting attached directly to the tower (2 level). Cladding to be in
compliance with the lift code.
Drive System
Supply voltage
Dual Oil Hydraulic Cylinders one each side of the lift car with chain over operation. 1:2 Ratio.
240 volt 16 amp
Travels:
Standard model - up to 7 metres
Deluxe model - up to 7 metres
Lift Speed:
Standard rated speed .208m per second using a hydraulic valve block with an up stop
Upgrade rated speed .292m per second using a VF Drive (optional extra)
Lifting Capacity:
Lift Operation:
Lift Tower:
Built as a free standing self supporting unit, the tower comes complete with doors, door frames,
flashing, electrical wiring and hydraulic cylinders. No load bearing walls are required.
Pit Depth:
100mm
Car Size:
Standard Model - 900mm wide x 1300mm deep & 2000mm high with a
clear door opening of 820mm.
Deluxe Model - 1100mm wide x 1400mm deep & 2000mm high with a
clear door opening of 870mm
Car Configuration
Single entry
Car Fitout:
The lift car is available in a number of different finishes from the more stream line look of
colourbond capped panels using shadow lines and butt joins to the more traditional look of
Tasmanian Oak trimmed with timber moulding. For those that would like to add their own
taste to the lifts car decor' we also offer vinyl and stainless steel as an option.
3 level
3 level
Standard features included:
* Non-slip flor covering indoor/outdoor carpet
* Emergency telephone mounted into a recessed box
* Two to four recessed down lights
Landing Doors:
Fitted with swing action doors the Phoenix can be supplied with a variety of
door styles:
* Redi-cote flush door
* Metal
* Glass
handle. Glass view panels are available in the Redicote and Metal doors.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Phoenix - Continue
Stations:
Mounted on a stainless steel plate with flush stainless steel buttons the
electric controls are automatic in operation
* Option available to key lock one or all landings to prevent unwanted users
Safety features:
Optional feature - The hydraulic pump is controlled by a variable voltage
frequency drive that provides a smooth acceleration giving unsurpassed
passenger comfort in a hydraulic lift.
Machine Cabinet:
Fabricated from metal and painted the machine cabinet is suitable for
external or internal installation.
The cabinet is fitted with a key lockable door and contains the hydraulic
power unit, hydraulic control valves, electrical control board, emergency
power supply and cabinet light. The emergency tools and instructions are
located within this cabinet.
Maintenance:
condition.
Warranty:
damage.
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or
refuse any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
AUSSIE LIFTS
The Silent Servant - Dumb Waiter
Product Description
The Silent Servant is a manually operated dumbwaiter specifically designed to move goods such as groceries,
laundry, firewood, etc, between the floors of multi-level homes.
Using an advanced heavy-duty counter-weighted hoist-mechanism, the Silent Servant delivers a smooth, quiet
operation with minimum effort. Made in the USA and imported by Aussie Lifts, the Silent Servant is made from
quality materials to insure a lifetime of trouble-free service with a minimum of maintenance.
Specifications
Manufactured in:
USA
Imported by:
Aussie Lifts Pty Ltd
Car Construction:
Hardwood veneer with laminated plastic edging and carbon steel fittings
Lift Mechanism:
Heavy duty hoist machine, self-aligning ball bearings, fully automatic brake
mechanism, lift car runs on machine grooved rails
Braking System:
Fully automatic gray-iron and aluminium-bronze brake system
Counterweight:
Solid iron counterweight running on machine grooved rails
Cables:
Galvanized aircraft cable 3/16" 7 x 19 - ultimate breaking strength of 2.2 tons
Hand Rope:
Soft woven white polyester 3/4" inch diameter with a swivel connector and wooden
guide rail
Waiter Guide Rails:
1/4" extruded 6063-T5 aluminium on both sides of the car with injection moulded
Acetyl Copolymer guide shoes (for high strength with minimal friction) for car and
counterweight
Residential Models (See drawings on reverse side)
Model
HW
HD
Hoistway Hoistway
Width
Depth
OPEN
(F) Front Opening
OPEN
OPEN
OPEN
OPEN
(FR) Front & Rear
Opening
CW
CD
CH
KG
E
H
Ratio
Car
Width
Car
Depth
Car
Height
Capacity
Kg
Machine
Space
Top Floor
to Ceiling
Lift
Ratio
R20F
600
R20FR 600
R20CP 600
480
480
480
500
500
500
406
406
406
960
960
960
32
32
32
685
685
685
2210
2210
2360
3.0
3.0
3.0
R24F
710
R24FR 710
R24CP 710
580
580
580
600
600
600
500
500
500
914
914
914
48
48
48
787
787
787
2460
2460
2610
3.7
3.7
3.7
R28F
810
R28FR 810
R28CP 810
685
685
685
710
710
710
600
600
600
914
914
914
64
64
64
880
880
880
2565
2565
2715
4.4
4.4
4.4
R32F
910
R32FR 910
R32CP 910
787
787
787
810
810
810
710
710
710
914
914
914
73.6
73.6
73.6
965
965
965
2640
2640
2690
5.0
5.0
5.0
*CP Models may be open on three sides (front, rear and one side)
OPEN
(CP) Corner Post* Opens
Front & Left or Right
12 Achievement Crescent. Acacia Ridge. QLD. 4110.
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
AUSSIE LIFTS
The Silent Servant
Manually Operated Dumb Waiter
Feature-Packed Design
!Heavy-duty hoist machine
!Self-aligning ball bearings
!Fully automatic brake
!Engineered aluminium guide rails
!Precision moulded bearing-quality guide shoes
!Simplistic design
!Time-saving installation features
!Ecologically sound
Residential Applications
!Groceries
!Laundry
!Firewood
!Prepared food and snacks
!Seasonal storage
!Reduce back strain
!Reduce stair usage
!Seniors & disabled
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
The ML3000
AS 1735 part 15 BCA E3.6 Compliant
Product Description
Designed for commercial application where a lift is required for disable access and overhead space is not an issue.
Built to comply with the requirements of the Australian Standards 1735 part 15, the ML3000 can travel upto 4 metres, runs under
constant pressure and is BCA E3.6 Compliant
The ML3000 is perfect for applications were disable access is necessary but budgetary restraints apply.
Specification
Manufactured in:
Standard Compliant:
AS1735 part 15 & BCA E3.6 Compliant
Application:
Comercial
Installation:
The lift complete with it own tower can be fitted to an owner supplied shaft or have your choice
of cladding attached directly to the tower. No load bearing walls are required. Cladding is
to be in compliance with the lift code.
Drive System
Supply voltage
Dual Oil Hydraulic Cylinders one each side of the lift car.
240 volt 16 amp
Travels:
up to 4 metres
Lift Speed:
Lifting Capacity:
Lift Tower:
Pit Depth:
100mm
Car Size:
1100mm wide x 1400mm deep & 2000mm high with a clear door opening
of 900mm
Car Configuration
Single entry
Car Fitout:
For durabilty the lift car is lined in white colourbond and trimmed with
extruded aluminium. Other options are available
The car floor can either be fitted with grey indoor/outdoor carpet or left bare.
(Intermediate landing are an option)
* Dual control inside the lift car
* Braille & Tactile
* EM Phone
* Light curtain across the door entrance
* Door hold open device
Landing Doors:
Fitted with swing action doors the ML3000 can be supplied with a variety of
door styles:
* Redi-cote
* Metal
* Glass
All doors are fitted with mechanical electric interlock, an adjustable automatic door
closer and a pull handle. Glass view panels are available in the Redicote and Metal
doors.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The ML3000
Stations:
Mounted on a stainless steel plate with stainless steel buttons the electric
controls are automatic in operation
Key lockable at one or all landings to prevent unwanted users
Illuminated indications
Weatherproof stations are available for external landing stations
Safety features:
variable frequent drive that provides a smooth acceleration giving
unsurpassed passenger comfort in a hydraulic lift.
Machine Cabinet:
Maintenance:
condition.
Warranty:
damage.
any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Mariner 16 Commercial
Product Description
Designed for commercial applications where a lift is required for disable access for multiple levels or limited overhead.
Built to comply with the requirements of the Australian Standards 1735 part 16, the Mariner 16 can travel up to 7 metres,
runs under automatic control and is BCA E3.6 Compliant
The Mariner 16 is perfect for schools, factories, churches, clubs, sporting grounds and government buildings.
Specification
Manufactured in:
Standard Compliant:
AS1735 part 16 & BCA E3.6 Compliant
Application:
Commercial
Installation:
The lift comes complete with its own tower and can be fitted to an owner supplied shaft or
your choice of cladding attached directly to the tower. No load bearing walls are required.
Cladding is to be in compliance with the lift code.
Drive System
Supply voltage
Dual Oil Hydraulic Cylinders one each side of the lift car with chain over operation. 1:2 Ratio.
240 volt 16 amp
Travels:
Up to 7 metres
Lift Speed:
Lifting Capacity:
Lift Operation:
Rated speed .208m per second using a hydraulic valve block
Lift Tower:
Pit Depth:
100mm
Car Size:
1100mm wide x 1400mm deep & 2000mm high with a clear door opening
of 900mm
Car Configuration
Single entry
Car Fitout:
For durability the lift car is lined in white colourbond and trimmed with
extruded aluminium. Custom finishes such as timber, MDF, vinyl and
stainless steel are also available with an alteration in shaft size.
3 levels
* Dual control inside the lift car
* Braille & Tactile
* EM Phone
* Four recessed down lights
* Light curtain across the door entrance
* Door hold open device
* Non-slip flor covering indoor/outdoor carpet
Landing Doors:
Fitted with swing action doors the Mariner can be supplied with a variety of
door styles:
* Redi-cote flush doors
* Metal
* Glass
handle. Glass view panels are available in the Redicote and Metal doors.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
The Mariner 16 Commercial Cont
Stations:
Mounted on a stainless steel plate with stainless steel buttons the electric
controls are automatic in operation
* Key lockable at one or all landings to prevent unwanted users
Safety features:
frequency drive that provides a smooth acceleration giving unsurpassed
passenger comfort in a hydraulic lift.
Machine Cabinet:
Maintenance:
condition.
Warranty:
damage.
any changes.
Ph - 3274 4211. Fax 3274 5543
Australian Owned
Australian Made
Australian Designed
AUSSIE LIFTS
The Pandect - Lowrise Platform Lift
Product Description
Suitable for residential and commercial use, the low-rise Pandect lift has been specifically designed for
disability access of heights of up to 1 metre. Provided as a complete unit, the Pandect is extremely easy
to install and operate.
Capable of lifting either 260kg or 340kg (3 people standing - or 1 person standing and 1 person in a
wheel chair) the Pandect is perfect for placing next to stairs, verandahs, mezzanine or split level
dwellings. Installed throughout Australia, the Pandect is perfect for schools, restaurants, scenic viewing
platforms, shops, churches and other similar low rise situations.
The Pandect is also an excellent alternative to expensive 14:1 ramp construction, especially in situations
where there is limited space or where building modifications are restricted due to space, design, heritage
listing or cost.
Specifications
Manufactured in:
New Zealand
Imported by:
Max Lift Capacity:
Residential Model - 260kg (3 people standing - or 1 person standing and 1 person in
a wheelchair)
Commercial Model - 340kg (3 people standing - or 1 person standing and 1 person in
a wheelchair)
Deck Size:
Residential Model - 1000W x 1200Dmm
Commercial Model - 1100W x 1400Dmm
Tower Height:
1480mm (lowered)
2450mm (max raised height)
Maximum Rise:
Floor to floor 1000mm (including 55mm ramp)
Lift Speed:
0.020 m/sec
Drive System:
Oil hydraulic
Pit Depth:
(Optional) 60mm
Controls:
Automatic buttons & key isolation
Standards:
Meets or exceeds requirements of the Australian Standards Lift code AS1735 Part 14
Usage:
Residential & commercial
Installation:
Internal or external installation. Main support frame requires 9 Dyna bolts into concrete
slab. 4 tappetts required for anti-entrapment roller blind. Can also be fitted to timber
floor joists.
Supply
Requirements:
240volt 10amp GPO
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
AUSSIE LIFTS
The Pandect
Lowrise Platform Lift
SAMPLE ONLY
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
AUSSIE LIFTS
The Mobilift CX - Portable Wheelchair Lift
Product Description
The Mobilift CX is a wheelchair lift that provides portable disability access to any location. Unlike most vertical
platform lifts, the Mobilift CX is manually powered and its unique counterbalanced weight system combined with a
highly-efficient cranking system means lifting a 136kg (wheelchair and 1 person) to a height of up to 1.5 metres
requires only 5kg of force and can be done within 20 seconds! The absence of batteries, hydraulic and electric
components makes this wheelchair lift extremely reliable and virtually maintenance free.
With large wheels than can negotiate rough terrain, the Mobilift's high portability means you can provide disabled
access to more than one part of the same facility. The lift only requires 1.8kg of pressure to start rolling - as easy as
moving a shopping trolley - and can be manoeuvred and operated by one person with no training necessary (easy to
understand pictogram instructions are displayed on the rear of the unit).
With a lifting capacity of 272kg, the Mobilift CX is suitable for most wheelchairs including electric wheelchairs and
small electric scooters. The Mobilift CX can travel to heights of up to 1520mm making it ideal for schools, community
centres, sporting clubs, train platforms, conference rooms and stages.
The Mobilift CX can also be a great revenue earner, since its portability means it can be rented or hired out to other
organisations.
Specifications
Manufactured in:
Canada
Imported by:
Carrying Capacity:
272kg (1 person in a wheelchair or scooter)
Maximum Travel:
1524mm
Typical lifting time:
20 seconds to maximum height of 1524mm
Lift Speed:
Typical speed 0.076m/sec
Crank Force Light:
2.2kg to lift 70kg
Crank Force Heavy:
5.0kg to lift 135kg
Push Force:
1.8kg on level ground to start a Mobilift moving
Lift Weight:
135kg
Lift Height:
1675mm
Lift Width:
955mm
Length:
1830mm (parked)
Platform Size:
890mm x 1400mm
Bridge Ramp Size:
510mm x 815mm
Bridge Ramp:
Accommodates a large wheelchair or scooter
USA Compliance:
ADA compliant under sections 38.83, 38.95 and 38.125
Australian Standards:
NA. Independently accessed.
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
AUSSIE LIFTS
The Mobilift CX
Portable Wheelchair Lift
SAMPLE ONLY
Load
Position
Ph - 3274 4211. Fax - 3274 5543
A.C.N. 100 798 703. Q.B.S.A. 1025986.
Raise & Unload

Brochure - Gemini Home Show

Transcription

Similar documents

Car-Lifts - NANI – Verladetechnik

ShoreStation Installation Guide * DANGER

accessories uk

Read more

EASY LIFT 140 - Morris Site Machinery

Multiple Product Brochure

Colmore Gate 1st Floor Brochure (+EPC)

Summer 2014, Issue 2

hydraulic lifts at the eiffel tower