Trellis - Brattleworks

Transcription

BrattleWorks
®
GARDEN FURNISHINGS
ARBORS • PERGOLAS • FENCES
GATES • PLANTERS • TREILLAGE
www.brattleworks.com w Phone (978) 410-5078 w Fax (978) 730-8026
Catalogue 800
BrattleWorks has been hand crafting traditional garden fences, picket
fences, garden arbors, gates, pergolas,
trellis, privacy lattices, and planter
boxes throughout America’s homes and
gardens since 1987.
Beautifying Homes Nationwide
We have standard fencing designs,
as well as custom hand crafted designs.
Create your own custom framework for
your home and property. Browse our
extensive selection or design your own.
We can sell and ship any fencing project
anywhere in the nation. Adding those
personal touches to your property makes
your home special and unique to you.
Because we enjoy our own yards and
gardens, we know how to create remarkably lovely fences and accessories that
encourage an element of personal pride
and spiritual stimulation. To that end,
we use only the best materials so that
your fencing is not only beautiful, but
also sturdy and secure. Made with clear,
kiln-dried Western Red Cedar, stainless
steel fasteners, and quality stains, you’ll
find nothing but satisfaction with our
products. All products come in as raw
materials and leave as works of art. Let
BrattleWorks creations beautify and
amplify your creations.
Table of Contents
Custom.....................................................
3
Arbors......................................................
LaFayette.....................................
Belmont.........................................
4
5
7
Pergolas...................................................
Sorrento........................................
SantaFe.........................................
Fences.......................................................
Trellis.............................................
Lattice...........................................
Solid Board...................................
Picket.............................................
9
10
11
Posts..........................................................
21
Gates.........................................................
23
Planter Boxes.........................................
24
Treillage..................................................
25
Component Directory..........................
26
12
13
15
17
19
Customer Service
Phone (978) 410-5078
www.BrattleWorks.com
Fax (978) 730-8026
project@brattleworks.com
2
©2012 BrattleWorks Co., Inc.
Custom Orders
BrattleWorks does custom work. We routinely alter sizes of our standard items
to make them fit our customers’ needs. We can also assist you if your project requires
a completely custom item. We can start from a photo or rough sketch. Below are a few
examples of custom works.
Bell Arbor
Newport Arched Double Gate
Trellis Oval
Garden Arbor Bench
Starburst Wall Treillage
Give Us Your
Design!
Solid Board with Circle Reducer
LaFayette Logo Arbor
Trellis
For More Detailed Information Visit Our Website!
3
Arbors
Decorative arbors are French in origin and derive their name from the French
“le arbor”—or tree. Arbors can enhance any space, such as an entrance to a garden,
patio area, or home. Lengths can be extended to cover a walkway, and widths can be
expanded. An arbor can be a focal point at the end of a vista that invites the viewer
to come and see what lies beyond.
By design, arbors can be a simple arch over a garden gate, stand-alone, or be
flanked by shrubbery, fences, or a wall. Arbors are ideal supports for growing plants—
the right vines and flowers on a simple arbor can create a thing of beauty.
BrattleWorks has two lines of arbors, LaFayette and Belmont. The LaFayette
arbor features an open arch design and key while the Belmont arbor features a solid
arch and lower overall height. Both can be customized in length, width, and side panel
design.
BrattleWorks’ arbors are made of Western Red Cedar. Eastern White or Pacific
Yellow Cedar are also available per customer request. Cedar, cupressaceae, is one of
the most naturally decay-resistant species of wood. Above ground, cedar will last indefinitely as long as it is periodically stained, painted, or oiled. Cedar ground posts
will endure best in well-drained soil and are known to last over 15 years. BrattleWorks
also offers a Forever ™ Post which lasts a lifetime and is a combination wood & metal
pipe. See the Component Directory to customize your design.
BrattleWorks’ products are available Natural or stained in White or Evergreen
color. Custom colors are also available. We use Zinsser or Benjamin Moore acrylic
stains and primers. Natural cedar will weather to a silver-gray.
Model #70 Belmont Arbor
4
Using the #12 model as an example, this graphic
illustrates how the BrattleWorks’ components are
assembled. Stainless steel screws and touch-up
stain come with your order.
LaFayette Arbor
The LaFayette Arbor features an open arch design and is ideal for arbors up
to 73” inside width. The LaFayette Arbor begins with five basic components: arches,
stringers, side base panels, side topper panels, and posts. Mix and match individual
components—longer arches or wider side panels—to create your own design.
The models shown represent just a sampling of the possible combinations. Model
numbers have been added to our most popular combinations for ease in ordering. By
adding reducer wings, as on the #30 model, or a garden gate, your arbor takes on a
grander scale.
These pictures are
both of Model #30
LaFayette Lattice
& Trellis Arbor
with Wings. One
photo is stained
white while the
other is natural.
The LaFayette arbor can be extended to almost any length using longer
stringers and multiple arches. Base and topper panels are available in
three lengths; 31”, 51”, and 91”. See the Component Directory to customize your design.
Model #12 LaFayette Arbor
Extended LaFayette Arbor with 91”
Lattice Base Panel and Circle Topper
Panel
Model #42 LaFayette
Lattice Base & Circle
Topper
5
The LaFayette Arbor can be made wider to facilitate access or cover a large
walkway. Wider arbors could enclose a bench or support flower containers as pictured
below. The standard arbor models come with an inside width of 42” (3½’). LaFayette
arches are also available with inside widths of 52”, 62” and 73”. BrattleWorks’ arbors
can be enhanced with single or double wings as shown in Model #80 and #34. Single
or double gates are available for most arbor widths. See the Component Directory to
customize your design.
Model #38 LaFayette (Inside Width
73”, Depth 38”, Outside Width 80”)
Model #13
LaFayette
Model #19
LaFayette
Model #17
LaFayette
Model #18
LaFayette
Model #1362 LaFayette (Classic
Picket Gooseneck Fence panels)
Model #100 LaFayette Model #13 LaFayette with T155 LaFayette Garden Arch Over T155 Gate
(Trellis Base and Curved
Gate
(Lattice Base Panels with Circle Trellis
Trellis Topper Panels)
and Trellis Reducer Topper Panels)
6
Belmont Arbor
The Belmont Arbor features a traditional solid arch design and is our most popular arbor. It can be left to weather to a silver-gray or periodically oiled to maintain its
original look. A natural arbor will blend in with any garden setting and lend support
for plant material.
The Belmont is an excellent solution when a simple arbor is part of your design,
and it is also the easiest to assemble. Stainless steel hardware is included for assembly.
Model #70 Belmont
The Belmont arbor model #70 and #71 have an inside width of 42”, a depth of 28”, and an adjustable height of 85+”. Models #72 and #73 have the same measurements as #70 and #71, except they have
an outside width of 98”. Additional model #’s 75A thru 75F have an inside width of 42”, a depth of 38”,
and an adjustable height of 92”. Model #76 has the same dimensions, except an outside width of 118”.
Model #71 Belmont with Gate
Model #72 Belmont with Wings
Model #73 Belmont with Gate
and Wings
As with all BrattleWorks’ arbors, gates or wing panels are also available. See the
Component Directory to customize your design. BrattleWorks’ products are available
Natural, White or Evergreen. We use Zinsser or Benjamin Moore acrylic stains and
primers. Natural cedar will weather to a silver-gray.
7
Model #75A Belmont
(Lattice Base & Arch
Topper)
Model #75E Belmont
(Lattice Base & Circle
Picket Topper)
Model #75B Belmont
(Trellis Base & Trellis
Topper)
Model #75C Belmont
(Lattice Base & Curved
Topper)
Classic Designs to complement your home
and garden!
Model #75D Belmont
(Lattice Base & Trellis
Topper)
Model #75F Belmont
(Trellis Base & Arch
Topper)
Long Belmont Arbor with Trellis Base Panels & Circle Topper Panels
8
Pergolas
The word pergola comes from the Italian “progettare” - to project. The distinguishing design of a pergola is both its flat roof and large joists that project beyond their
supporting posts. Pergolas can range from very simple designs with posts and joists
to more elaborate with cross stringers and side panels of trellis, lattice, solid board, or
pickets. Often, smaller pergolas are a design alternative to the arbor, while the larger
pergolas are used to create shade and a sense of intimacy over a patio, deck, or dining
area.
BrattleWorks has three designs of pergolas - Sorrento, SantaFe, and Chestnut Hill.
The Sorrento has an open double trellis joist with a maximum inside width of 73”. The
SantaFe, with a solid joist, is designed to span widths up to 12’. The Chestnut Hill has
a three layered roof which can span wider spaces as well.
There is no better garden structure than a pergola for growing, training, and
pruning plant material because its flat roof is easily accessible from inside. Flower
baskets are easily hung and maintained on a pergola stringer.
BrattleWorks’ pergolas are made of Western Red Cedar. Eastern White or Pacific Yellow Cedar are also available per customer request. Cedar, cupressaceae, is one
of the most naturally decay-resistant species of wood. Above ground, cedar will last
indefinitely as long as it is periodically stained, painted, or oiled. Cedar ground posts
Model #85B SantaFe Pergola (Trellis Base & Curved
Topper Panels)
Model #51 Sorrento Pergola (Trellis Base &
Trellis Topper Panels)
9
Sorrento Pergola
The Sorrento Pergola features an open joist construction of
double trellis supports and stringers. It has four basic components: joists
and stringers (the flat roof), side base panels, side topper panels, and posts.
The Sorrento style is ideal for pergolas with an inside width of up to 6’. Mix and
match individual components to create your own design. See the Component Directory
to customize your design.
Standard Sorrento Pergola with Wings
(Inside Width 42” & Outside Width 118”)
Model #22 Sorrento
(Trellis Base & Curved
Topper)
Model #44 Sorrento (Inside Width 73”
& Depth 73”)
Model #39 Sorrento (Lattice Model #29 Sorrento (Inside Width 69”, Model #41 Sorrento (Trellis
Base & Curved Topper with
Depth 35” & Outside Width 145”)
Base & Circle Topper with
Wings)
Wings)
Sorrento
Gate
Entrance
(Curved Trellis Gate)
Model #23 Sorrento (Trellis
Base & Circle Topper)
BrattleWorks’ products are available Natural, White or Evergreen. Custom colors
are welcome. We use Zinsser or Benjamin Moore acrylic stains and primers. Natural
cedar will weather to a silver-gray. All stainless steel assembly hardware is included.
10
Santa Fe Pergola
The Santa Fe Pergola is designed to span larger widths -- up to 12’. This pergola
features 2” x 6” joists crossed with 2” x 3” stringers and comes with standard 5” square
columns. A well placed pergola can be an integral part of a garden design.
If your design calls for a freestanding structure over a patio, dining area, deck,
car park, or bench, the Santa Fe pergola is the solution. Additionally, this pergola can
be attached to a house wall to cover a deck or patio.
Shown below is Santa Fe model #85J with a 6’ inside width and 12’ length. It has
been customized with 31” long trellis base panels and curved topper panels on either
end. You can choose inside widths between 4’ and 12’ and use any of the BrattleWorks
panels shown in the Component Directory to customize your design.
Santa Fe Decorative Sleeved Columns
BrattleWorks’ large decorative
columns for Santa Fe pergolas
come in 5” and 7” square sizes.
These are hollow columns with lock
miter corners that are sleeved over
a ground post (not included). A
standard 4” x 4” ground post will
fit inside a BrattleWorks’ column.
This traditional style of sleeving
provides a decorative look while
protecting the support columns.
Model #81 A Santa Fe Per- Model #85 A Santa Fe Pergola
gola (4’ Inside Width, 41” (4’ Inside Width, 41” depth, 130”
Depth)
Outside Width)
Model #85H Santa Fe
Wall Pergola 6’x12’
Model #85J Santa Fe Pergola 6’x12’ with
Trellis Base & Trellis Curved Topper
Panels
Wall Mounting
Bracket
For More Detailed Information Visit
Our Website!
Joist Outside Width (Add 34.5” to Inside Width)
Joist Overhang beyond 5” post if centered under
first stringer is 12”
Joist Outside Width (Add 23.5” to Inside Width)
Joist Overhang beyond 5” post if centered under
first stringer is 12”
11
Fences
There is a variety of fencing options available to create the perfect look and feel
for your outdoor space. We hand craft four main fence types: trellis, lattice, solid board,
and picket. Each of these types can have customized bases, toppers, gates, posts, and
dimensions. Trellis fencing provides a decorative enclosure that allows your yard and
landscaping to be displayed. Lattice fencing is a good alternative when more privacy
is desired. Solid board with tongue and groove fencing provides total privacy and security. Traditional picket fences create a timeless and classic look.
BrattleWorks’ pergolas are made of Western Red Cedar. Eastern White or Pacific Yellow Cedar are also available per customer request. Cedar, cupressaceae, is one
of the most naturally decay-resistant species of wood. Above ground, cedar will last
indefinitely as long as it is periodically stained, painted, or oiled. Cedar ground posts
Lattice Base & Trellis Topper Panel
Solid Board Base & Curved Picket Topper Panel
Trellis Base, Curved Trellis Topper Panel & Trellis
Reducer Panel
Classic Picket Panels
color. Custom colors are also available. We use Zinsser or Benjamin Moore acrylic
12
Trellis
Trellis fencing provides a classic garden look that enhances your landscaping
and does not restrict one’s view with the open design. BrattleWorks’ trellis is produced
from 1” square western red cedar, using a half lap joint, stainless steel fasteners, and
waterproof glue for fastening the 4” square openings. The fence panels can be cut every
5” to shorten a panel to maintain the design. See the Component Directory to customize your design.
BrattleWorks Trellis Half Lap
Joinery, 4” Opening - 1” Trellis
Trellis Base Panels, Circle Trellis Topper Panels and Belmont Arbors
color. Custom staining is also available. We use Zinsser or Benjamin Moore acrylic
13
Stepped Trellis Base Panel with Brick Pillars
Stepped Trellis Base & Trellis Topper Panel
Trellis Base & Curved Trellis Topper Panel with
Fence Jog
Stepped Trellis Base Panel
W!
NE
Diagonal Trellis
Trellis on Bridge
14
Lattice
BrattleWorks’ lattice fence panels are the perfect compromise between open trellis and solid board panels. The lattice creates a greater degree of privacy than trellis,
yet still allows for sunlight and air. These panels can be used to screen around a pool,
deck, or patio.
Lattice panels are laid-on joinery with 5/8” thickness and a 1” square opening.
They can be cut every 2” to shorten a panel while maintaining the design. Also, available in diagonal with 2” square opening. See the Component Directory to customize
your design.
BrattleWorks Traditional Lattice Laid-On Joinery (5/8”
Lattice with 1” Opening)
Lattice Base Panel and Trellis Topper Panel
Lattice Gates and Fence Panel Enclosure
Lattice Base Panel and Curved Topper Panel
Assembled in a Radius
Privacy Lattice Fence with Trellis Topper
color. Custom staining is available too. We use Zinsser primer and Benjamin Moore
acrylic stains. Natural cedar will weather to a silver-gray.
15
Lattice & Trellis Base Panels with Lattice &
Trellis Topper Panels enclosing a Tennis Court
Lattice Base & Circle Trellis Topper Panel
Lattice Base & Circle Picket Topper
Lattice Base & Newport Picket Topper
Lattice Base & Arch Trellis Topper
Lattice Base & Curved Picket Topper
16
Solid Board
BrattleWorks’ solid tongue & groove board panels provide total privacy and security, especially for the perimeter of ones’ property. The solid panel is assembled with
7/8” thick tongue & groove boards for optimum strength and rigidity. The “V” design
pattern is on 3” centers. Solid board base panels come in several heights and lengths,
each of which can be accompanied with a variety of topper panels. See the Component
Directory to customize your design.
2.375”
BrattleWorks 7/8” Thick Solid
Board with Tongue & Groove
“V” on 3” Centers
Solid Board Base Panel with Lattice Topper Panel
Cap Rail
BrattleWorks’ Cap
Rail has beveled
edges to promote
moisture run-off
Kickboard
5.25”
2.25”
Solid Board Base Panel with Circle Trellis
Topper Panel
Model JW200 Post Joist
Santa Fe Post Joist with
Solid Board
Solid Board Base Panel with Lattice Topper Panel
color. Custom staining is available too. We use Zinsser primer and Benjamin Moore
17
Solid Board Base & Classic Picket
Topper
Solid Board Base & Curved Picket
Topper
Solid Board Base & Trellis Arch
Topper
Solid Board Base & Trellis Topper
Solid Board Base & Lattice
Topper
Solid Board Base & Circle Picket
Topper
Solid Board Base & Arch Picket
Topper
Solid Board Base & Cambridge
Picket Topper
Solid Board Base & Newport Picket
Topper
18
Picket Fencing
BrattleWorks’ traditional picket fencing derives its style from old New England
seaport homes in towns such as Salem, Nantucket, Boston, Newport, and Mystic. The
picket is 1.375” wide and 1” thick with a gently discerned point and a picket spacing of
2.375”. The decorative posts are a major design element in this historic style of picket
fencing. BrattleWorks’ posts come in four standard sizes: 5”, 7”, 9” and 11” squares. The
hollow posts are sleeved over ground posts and thus remain above ground ensuring a
long life and quality appearance. Also, offered is a Forever™ masonry post for mounting picket panels on stone or brick walls. See the Component Directory to customize
your design.
Classic Picket Radius Panel
BrattleWorks’
Pickets are 1” x
1.375” with 2.375”
Opening.
Classic Picket Panels Mounted On Brick
Wall
Plymouth Picket Panels and Double
Plymouth Gate
Newport Picket Panels
Main Line Picket Panels Mounted On
Stone Wall
Sleved Post
Cambridge Picket Panels Stepped
BrattleWorks’ products are available Natural or stained with Benjamin Moore
19
Cambridge Picket
Classic Picket
Plymouth Picket
Main Line Picket
Lake Forest Picket
Classic Picket Goose Neck Panel
with 11” & 5” sq. Decorative Posts
Newport Picket
Brookline Picket
20
Posts
BrattleWorks offers a wide variety of posts. The standard 3.5” solid square post
of western red cedar is used most often in Arbors and Sorrento Pergolas. They are also
found in fencing. Larger 4.5” Estate Posts are used when the design requires greater
size or strength. These posts are usually eastern white cedar and may contain some
cracks or knots. 4.5” western red cedar posts are also available. See the Component
Directory to customize your design.
Standard Post Cap & Finial
Forever™ Ground Post (Post,
Pipe, Cap & Finial)
These posts are 3.5” & 4.5” Sq.
and fitted with 26” or 34” of
steel pipe which can be set in
concrete. This type of post
is suggested when ground
conditions are too wet for
a standard post. These post
will last a lifetime.
Estate Post & Cap
Caps are included
with all posts
Decorative Sleved Posts &
Cap for Picket Panels,
Entrances & Pergolas
Decorative sleeved posts (5”,
7”, 9” & 11” Sq) and decorative columns (5” & 7” Sq) are
used with picket panels and
Santa Fe pergolas. A ground
post is installed or secured to
a deck or masonry surface
and the decorative post is
sleeved over the ground
post. Decorative posts are
also available with fluting.
Post Fluting
Forever™ Masonry Post
(Post, Bracket, Cap & Finial)
Placing a fence on top of
a stone, brick or concrete
wall is no problem with the
Forever™ masonry post. The
post is fitted with a bracket
which is bolted onto the masonry surface.
Sleved Post
21
Sleeved Posts & Decorative
Column Installation
Typical installation will
consist of sinking a 4” x 4”
ground post 18” - 24” below ground and leaving 2’
above ground. The sleeved
post is slid over the ground
post and secured with the
provided screws. For a decorative column or gate post,
ground posts are sunk approximately 2’ below ground
and leaving 3’ - 4’ above
ground.
Post Wedges for Fence Jog
Posts wedges are used when
a jog is designed into a fence
plan or an obstruction, such
as a tree, needs to be avoided. They are attached to the
post and come in either 22º
or 45º.
22º Wedge
45º Wedge
Radius Fence
Pergola Caps
These caps are designed to
receive and secure the pergola joist to the top of the
decorative column.
Some fence designs require a jog in the fence run, or a
curved section.
Wedges can be fastened to the posts to create a radius
run of fence panels as shown below.
Wedge 22½°
Wedge 45°
PANEL
POST
Forever Ground
Forever Ground
Custom Sizes
Available!
Standard
Forever Masonry
Estate
Forever Masonry
22
Gates
BrattleWorks’ gates complement arbors, pergolas, and fences. They are designed
to swing either in or out, hinged from the left or right. All gates come with hardware,
except where noted. BrattleWorks’ gates are made of Western Red Cedar. Cedar,
cupressaceae, is one of the most naturally decay resistant species of wood. Above
ground, cedar will last indefinitely, as long as it is periodically stained, painted, or
oiled. See the Component Directory to customize your design.
Double Trellis Gate
Lattice with Circle
Trellis Topper Gate
Double Classic Picket Gate
Solid
Board
with
Curved Trellis Topper
Gate
Give Us Your
Design!
Lattice Gate
BrattleWorks’
products are available
Natural or stained
with Benjamin Moore
acrylic stains. Natural
cedar will weather to a
silver-gray.
Double Trellis Gate
Plymouth Picket Gate
23
Planters
BrattleWorks’ planters can be used alone or in conjunction with a trellis, lattice
back, or obelisk. Planter combinations with trellis or lattice backs can be used for a patio
or deck screen. See the Component Directory to customize your design. BrattleWorks’
products are available Natural or stained White or Evergreen. We use Zinsser or
Benjamin Moore acrylic stains. Natural cedar will weather to a silver-gray.
Model #200: V600 Planters with V205 Planter Backs
and L155 Lattice Base Panel
Planter Box Liner
Included with Every
Standard Dimension
Planter Box
Planter Box Liner with Drainage
Holes
V600 Planter Box with
V206 Lattice Back
V600 Planter Box with
V205 Trellis Back
24
V159 Garden
Obelisk
VA109 Planter
Obelisk
Treillage
BrattleWorks’ treillage is designed to decorate a wall or plain fence. The
wall mounted components can be grouped into various sizes for almost any space
requirements. Vines or flowers can also be grown on the treillage. See the Component
Directory to customize your design. BrattleWorks’ products are available Natural or
stained White or Evergreen. Custom stains are available too. We use Zinsser primer
and Benjamin Moore acrylic stains. Natural cedar will weather to a silver-gray.
Give Us Your
Design!
Model 83A Treillage Design
Rectangle Treillage
Model 83B Treillage Design
25
Component Directory • Arbors & Pergolas
LaFayette Arbor Arches
Code
Dimensions
A404
42”InsideWidth
A4041* 52”InsideWidth
Belmont Arbor Arches
Code
Dimensions
A400
42” Inside Width
A4001* 52” Inside Width
Belmont Arbor Stringers - 1.5”Sq.
Stringer
Arch Code
With
Code
Length
A400/A4001
31” Panels A4018
6@33.25”
A400/A4001
51” Panels A4012
6@53.50”
A400/A4001
91” Panels A4015
6@93.25”
A4002/A4003 31” Panels A4019
8@33.25”
A4002/A4003 51” Panels A4013
8@53.50”
A4002/A4003 91” Panels A4016
8@93.25”
A4004/A4005 31” Panels A4020 10@33.25”
A4004/A4005 51” Panels A4014 10@53.50”
A4004/A4005 91” Panels A4017 10@93.25”
Sorrento Pergola Joists
Code
A405
A402
A403
A406
Dimensions
42” Inside Width
52” Inside Width
62” Inside Width
73” Inside Width
SantaFe Post Joist
Code
Dimensions
JW200
27.5” x 37”
Sorrento Pergola Stringers - 1.5”Sq.
Code
With
Code Length
A405/A402 31”panels A408 5@48”
A405/A402 51”panels A409 5@72”
A405/A402 91”panels A421 5@96”
A403/A406 31”panels A413 7@48”
A403/A406 51”panels A420 7@72”
A403/A406 91”panels A422 7@96”
Custom Sizes
Available!
Decorative Pergola
Columns
Code
Dimensions
5”Column
P534
5”Sq x 84”
P5341
5”Sq x 96”
7”Column
P576
7”Sq x 84”
P5761* 7”Sq x 96”
Round Column
P700*
7” Round x 84”
* must ship freight
26
LaFayette Arch Stringers - 1.5”Sq.
Code
Use with
Dimensions
A407 31” Panels
6@x33.5”
A414 51” Panels
6@x53.5”
A416 91” Panels
6@x93.5”
SantaFe Wall Joists
Code
JW104
JW105
JW106
JW107*
JW108*
JW109*
JW110*
JW111*
JW112*
Inside
Width
4’
5’
6’
7’
8’
9’
10’
11’
12’
Length
71.5”
83.5”
95.5”
107.5”
119.5”
131.5”
143.5”
155.5”
167.5”
Stringer
Count
9
11
13
15
17
19
21
23
25
SantaFe Pergola Joists
Code
J104
J105
J106
J107*
J108*
J109*
J110*
J111*
J112*
Inside
Width
4’
5’
6’
7’
8’
9’
10’
11’
12’
Length
82.5”
94.5”
106.5”
118.5”
130.5”
142.5”
154.5”
166.5”
178.5”
Stringer
Count
10
12
14
16
18
20
22
24
26
Pergola Joist
Stringers
Stringers are 6” on
Center - 1.5”x 2.5”
Code* Length
J205
5’
J206
6’
J207
7’
J208
8’
J209
9’
J210*
10’
J211*
11’
J212*
12’
~Current Pricing Online~
Component Directory • Fence Base Panels & Treillage
Lattice
Trellis
NE
NE
W
Code
L141
L165
L155
L142*
L156*
L150*
L151*
L143*
L167*
L166*
Dimensions
36”H x 31”W
41”H x 31”W
51”H x 31”W
36”H x 51”W
41”H x 51”W
51”H x 51”W
71”H x 51”W
36”H x 91”W
41”H x 91”W
51”H x 91”W
Classic Picket
Code
PP336
PP342
PP348
PP936*
PP942*
PP948*
Code
T141
T125
T120
T142*
T115*
T101*
T102*
T143*
T305*
T300*
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Lake Forest Picket
Code
PP327
PP323
PP329
PP927*
PP923*
PP929*
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Array Treillage
Code
Dimensions
T705A 15”H x 31”W
T706A 26”H x 51”W
Curved Treillage
Dimensions
36”H x 31”W
41”H x 31”W
51”H x 31”W
36”H x 51”W
41”H x 51”W
51”H x 51”W
71”H x 51”W
36”H x 91”W
41”H x 91”W
51”H x 91”W
!
Code
TD141
TD125
TD120
TD142*
TD115*
TD101*
TD102*
TD143*
TD305*
TD300*
Code
Dimensions
B401 36”H x 31”W
B425 41”H x 31”W
B420 51”H x 31”W
B402* 36”H x 51”W
B415* 41”H x 51”W
B410* 51”H x 51”W
B411* 71”H x 51”W
B403* 36”H x 91”W
B405* 41”H x 91”W
B400* 51”H x 91”W
Main Line Picket
Cambridge Picket
Code
PP337
PP343
PP349
PP937*
PP943*
PP949*
Code
PP338
PP344
PP350
PP938*
PP944*
PP950*
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Plymouth Picket
Code
PP300
PP301
PP302
PP303
PP901
PP902
3’ Radius Picket
Available
in a 42”R
and 48”R
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Code
Dimensions
Classic Picket
PPR12* 36”H x 36”R
PPR13* 42”H x 36”R
PPR14* 48”H x 36”R
Main Line Picket
PPR21* 36”H x 36”R
PPR22* 42”H x 36”R
PPR23* 48”H x 36”R
Newport Picket
PPR31* 42”H x 36”R
PPR32* 48”H x 36”R
Trellis Treillage
Code
T700A
T701A
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Dimensions
21”H x 31”W
21”H x 51”W
Reducer Treillage
Code
L710A
L711A
Dimensions
21”H x 31”W
21”H x 51”W
58”
Arched Treillage
87”H 87”H
Code
Dimensions
CT251 21”H x 31”W
CT252 21”H x 51”W
Dimensions
36”H x 31”W
42”H x 31”W
48”H x 31”W
36”H x 91”W
42”H x 91”W
48”H x 91”W
Newport Picket
Code
PP345
PP351
PP945*
PP951*
Dimensions
42”H x 31”W
48”H x 31”W
42”H x 91”W
48”H x 91”W
Gooseneck Picket
61.5”
or
55.5” 48”
or
42”
Code Dimensions
PP360* 61.5”/48” x 31”W
PP361* 55.5”/42” x 31”W
Post on 61.5” & 55.5” side
Code Dimensions
P533
5”Sq x 75”
P574* 7”Sq x 75”
P592* 9”Sq x 75”
P599* 11”Sq x 75”
58”
87”H
58”
19”
19”
Code
Dimensions
T707A 21”H x 31”W
T707B 21”H x 51”W
Code
PP378
PP374
PP370
PP978*
PP974*
PP970*
Free Standing
Treillage
Lattice Treillage
T725 & T730
(4 Parts)
Code
Dimensions
T708A 21”H x 31”W
T709A 21”H x 51”W
Brookline Picket
W
!
Code
LD141
LD165
LD155
LD142*
LD156*
LD150*
LD151*
LD143*
LD167*
LD166*
Solid Board
Code
T725
51”W
Dimensions
87”H x 51”W
19”
51”W
Code Dimensions
T730 87”H x 51”W
* must ship freight
51”W
Code Dimensions
T731 87”H x 51”W
27
Component Directory • Topper Panels & Posts
Lattice Topper
Code
L180
L175
L176*
LA180
LA175*
LA176*
LB180
LB175*
LB176*
Dimensions
22”H x 31”W
22”H x 51”W
22”H x 91”W
36”H x 31”W
36”H x 51”W
36”H x 91”W
46”H x 31”W
46”H x 51”W
46”H x 91”W
Code
DL180
DL175
DL176*
DLA180
DLA175*
DLA176*
DLB180
DLB175*
DLB176*
Trellis Topper
Code
T242
T235
T236*
TA242
TA235*
TA236*
TB242
TB235*
TB236*
Solid Board Topper
Dimensions Code
22”H x 31”W DT242
22”H x 51”W DT235
22”H x 91”W DT236*
37”H x 31”W DTA242
37”H x 51”W DTA235*
37”H x 91”W DTA236*
47”H x 31”W DTB242
47”H x 51”W DTB235*
47”H x 91”W DTB236*
Code
B442
B435
B436*
BA442
BA435*
BA436*
BB442
BB435*
BB436*
Dimensions
22”H x 31”W
22”H x 51”W
22”H x 91”W
37”H x 31”W
37”H x 51”W
37”H x 91”W
47”H x 31”W
47”H x 51”W
47”H x 91”W
Curved Topper
Code
C240
C202
C203*
Dimensions
22”H x 31”W
22”H x 51”W
22”H x 91”W
Curved Lattice Topper
NE
W!
Code Dimensions
LC240 22”H x 31”W
LC202 22”H x 51”W
Lattice Reducer
Trellis Reducer
Solid Board Reducer
Circle Trellis Reducer
Code Dimensions
L220 22”H x 31”W
L221 22”H x 51”W
Code Dimensions
C247 22”H x 31”W
C248 22”H x 51”W
Code Dimensions
B447 22”H x 31”W
B448 22”H x 51”W
Code Dimensions
R248 22”H x 51”W
Code
Dimensions
PP325 22”H x 31”W
PP925* 22”H x 91”W
Code
Dimensions
PP324 22”H x 31”W
PP926* 22”H x 91”W
Newport Picket Topper Cambridge Picket Topper
Curved Picket Topper
Arch Picket Topper
Code
Dimensions
PPB1
22”H x 31”W
PPB2* 22”H x 91”W
Code Dimensions
PPA1 22”H x 31”W
PPA2* 22”H x 91”W
Standard Post
Cap & Finial
Code Dimensions
P505 3.5”Sq x 8’
P506* 3.5”Sq x 10’
Circle Picket Topper
Classic Picket Topper
Code Dimensions
PPC1 22”H x 31”W
PPC2* 22”H x 91”W
Code
Dimensions
PP322 22”H x 31”W
PP922* 22”H x 91”W
Circle Trellis Topper
Code
R245
R225
R255*
Estate Post & Cap
Dimensions
22”H x 31”W
22”H x 51”W
22”H x 91”W
Post Fluting
Pricing for white cedar estate
posts used for stained orders.
Pricing for red cedar estate
posts used for natural orders.
Decorative Sleved Posts & Caps
* must ship freight
28
Code
Dimensions
FLUTE One Face Side
Post Wedges
P511 22.5°
Panel
Post
P510 45°
Post
Code Dimensions
P510
2@ 45º
P511
2@ 22.5º
Dimensions
21”H x 31”W
21”H x 51”W
21”H x 91”W
Post, Bracket, Cap & Finial
Code Dimensions
P512A 3.5” x 25”
P512B
3.5” x 45”
P512C
3.5” x 55”
P512D 3.5” x 75”
P512E
3.5” x 84”
P512F
3.5” x 96”
Available in 4.5”
Code Dimensions
P521N 4.5”Sq x 8’
P523N* 4.5”Sq x 10’
Sleeved
Post
Code
CT247
CT248
CT250*
Forever™ Masonry Post
Code Dimensions
P521 4.5”Sq x 8’
P523* 4.5”Sq x 10’
Picket Code Dimensions
*Ground post
Height 5” Posts
not included
36” use P530 5”Sq x 39”
42”
P531 5”Sq x 45”
48”
P532 5”Sq x 51”
7” Posts
36” use P570 7”Sq x 41”
P571 7”Sq x 47”
42”
P572 7”Sq x 53”
48”
9” Posts
9”Sq x 47”
42” use P590
P591
9”Sq x 53”
48”
11”Post
48” use P599* 11”Sq x 75”
Arch Trellis Topper
Pipe
Forever™ Ground Post
Post, Pipe, Cap & Finial
Code
Dimensions
Post
Pipe
P513A
3.5”Sq x 25” +26”
P513B
3.5”Sq x 45” +26”
P513C
3.5”Sq x 55” +26”
P513D
3.5”Sq x 75” +26”
P513E
3.5”Sq x 96” +26”
P513F* 3.5”Sq x 120” +34”
Available in 4.5”
Component Directory • Gates
Lattice
Code
Dimensions
LC160* 36”H x 36”W
LA161* 41”H x 36”W
LA160* 51”H x 36”W
LA163* 62”H x 36”W
LA162* 72”H x 36”W
LC161* 36”H x 41”W
L161*
41”H x 41”W
L160*
51”H x 41”W
L163*
62”H x 41”W
L162*
72”H x 41”W
LC162* 36”H x 51”W
LB161* 41”H x 51”W
LB160* 51”H x 51”W
LB163* 62”H x 51”W
LB162* 72”H x 51”W
Newport
Code
PP190*
PP191*
PP193*
PP195*
Dimensions
42”H x 41”W
48”H x 41”W
42”H x 51”W
48”H x 51”W
Trellis
Code
TC160*
TA151*
TA150*
TA153*
TA152*
TC161*
T151*
T150*
T153*
T152*
TC162*
TB151*
TB150*
TB153*
TB152*
Dimensions
36”H x 36”W
41”H x 36”W
51”H x 36”W
62”H x 36”W
72”H x 36”W
36”H x 41”W
41”H x 41”W
51”H x 41”W
62”H x 41”W
72”H x 41”W
36”H x 51”W
41”H x 51”W
51”H x 51”W
62”H x 51”W
72”H x 51”W
Main Line
Code
PP170*
PP171*
PP173*
PP175*
PP177*
PP179*
Lattice, Trellis & Solid Board
Gate Hardware
Dimensions
36”H x 41”W
42”H x 41”W
48”H x 41”W
36”H x 51”W
42”H x 51”W
48”H x 51”W
Solid Board
Code
BC160*
BA161*
BA160*
BA163*
BA162*
BC161*
B161*
B160*
B163*
B162*
BC162*
BB161*
BB160*
BB163*
BB162*
Dimensions
36”H x 36”W
41”H x 36”W
51”H x 36”W
62”H x 36”W
72”H x 36”W
36”H x 41”W
41”H x 41”W
51”H x 41”W
62”H x 41”W
72”H x 41”W
36”H x 51”W
41”H x 51”W
51”H x 51”W
62”H x 51”W
72”H x 51”W
Code
PP150*
PP152*
PP154*
PP156*
PP158*
PP159*
Dimensions
36”H x 41”W
42”H x 41”W
48”H x 41”W
36”H x 51”W
42”H x 51”W
48”H x 51”W
Code
PP200*
PP201*
PP203*
PP205*
PP207*
PP209*
Cambridge
Code
PP180*
PP181*
PP183*
PP185*
PP187*
PP189*
Classic
Brookline
Dimensions
36”H x 41”W
42”H x 41”W
48”H x 41”W
36”H x 51”W
42”H x 51”W
48”H x 51”W
Code
PP160*
PP162*
PP163*
PP165*
PP167*
PP169*
Dimensions
36”H x 41”W
42”H x 41”W
48”H x 41”W
36”H x 51”W
42”H x 51”W
48”H x 51”W
Available in Diagonal
Trellis and Lattice!
Lake Forest
Gate hardware also sold separately.....
Hinge $65 a pair
Latch $48 each
Plymouth
Dimensions
36”H x 41”W
42”H x 41”W
48”H x 41”W
36”H x 51”W
42”H x 51”W
48”H x 51”W
Code
PP102*
PP103*
PP104*
PP105*
Dimensions
42”H x 41”W
48”H x 41”W
42”H x 51”W
48”H x 51”W
Picket Gate Hardware
Code
Dimensions
T154* 72”H x 41”W
TA154* 72”H x 51”W
Code
Dimensions
T155* 72”H x 41”W
TA155* 72”H x 51”W
Code Dimensions
B155* 72”H x 41”W
BA155* 72”H x 51”W
Code Dimensions
T157* 72”H x 41”W
TA157* 72”H x 51”W
Code Dimensions
T156* 72”H x 41”W
TA156* 72”H x 51”W
Code Dimensions
G159* 72”H x 41”W
GA159* 72”H x 51”W
Code Dimensions
G160* 72”H x 41”W
GA160* 72”H x 51”W
Code Dimensions
B156* 72”H x 41”W
BA156* 72”H x 51”W
Code Dimensions
G161* 72”H x 41”W
GA161* 72”H x 51”W
Code Dimensions
G162* 72”H x 41”W
GA162* 72”H x 51”W
* must ship freight
29
Component Directory • Gates & Planters
Code
Dimensions
G163* 72”H x 41”W
GA163* 72”H x 51”W
Code
Dimensions
G164* 72”H x 41”W
GA164* 72”H x 51”W
Code
Dimensions
G165* 72”H x 41”W
GA165* 72”H x 51”W
Code
Dimensions
G168* 72”H x 41”W
GA168* 72”H x 51”W
Code
Dimensions
G166* 72”H x 41”W
GA166* 72”H x 51”W
Code
Dimensions
G169* 72”H x 41”W
GA169* 72”H x 51”W
Code
Dimensions
G167* 72”H x 41”W
GA167* 72”H x 51”W
Code
Dimensions
G170* 72”H x 41”W
GA170* 72”H x 51”W
Custom arbor, driveway and entrance gates are available. Contact us with your ideas.
17.5”
Lattice, Solid
Board, and Trellis
Moon gates are
sold in pairs
64”
Hardware
not included
Code
ML31
MS31
MT31
Code
Dimensions
L181*
51”H x 91”W
L181A* 51”H x 81”W
L181B* 51”H x 71”W
Code
Dimensions
BW159A* 51”H x 81”W
BW159B* 51”H x 71”W
Planter Box Backs
Use with V600
Use with V400’s
53”
34”
34”
19”
19”
V205
V206
V105
V106
Planter Obelisk
Includes V400 Planter
Code
T159*
T159A*
T159B*
Dimensions
51”H x 91”W
51”H x 81”W
51”H x 71”W
Code Dimensions
V400 24”H x 21”W
V405 24”H x 21”W
V415 24”H x 21”W
V420 24”H x 21”W
V440 24”H x 21”W
V600 24”H x 36”W
VA109 76”H x 21”W
V159 69”H x 16”Sq
V205 53”H x 34”W
V206 53”H x 34”W
V105 53”H x 19”W
V106 53”H x 19”W
Dimensions
64”/81”H x 31”W
64”/81”H x 31”W
64”/81”H x 31”W
81”
Price
$947 / pair
$947 / pair
$947 / pair
Give Us Your
Design!
Planter Boxes
All V400 series Planters have the same
dimensions as the V400.
36”
21”
24”
24”
V600
V400
Alternate Planter
Legs
Garden Obelisk
A1
V405
V420
V415
69”
76”
A2
VA109
V159
A3
V430
Planter box
liner with
drainage holes
V440
More designs online.
* must ship freight
30
Component Directory • Ordering, Staining & Shipping
Ordering Information
Ordering is available online at www.brattleworks.com, via a local dealer, or by calling (978) 410-5078.
Need Project Design Help, Materials List, or a Quote?
Once you have determined the style of Arbor, Pergola, Gate, or Fencing that meets your needs, BrattleWorks will be happy to
assist you with your project design details.
BrattleWorks can assist with measurements such as heights, widths, or lengths and ordering quantities.
When contacting us, you should have overall measurements of your project.
For example:
A list of various sections
Fence A = 20’
Fence B = 13’ (goes down a hill)
Gate = 4’
Fence C = 3’ (ends at house)
or
A simple diagram
Fence A = 20’
Fence C = 3’
Fence B = 13’
House
Garage
Gate = 4’
Staining
All BrattleWorks’ manufactured products are available stained White (two coats of Zinnsser Bulls Eye 1-2-3, one coat of Benjamin Moore exterior solid acrylic stain), Evergreen (two coats of Benjamin Moore solid acrylic stain) or just primed (two
coats of Zinnsser Bulls Eye 1-2-3). There is a 9% (of Retail) staining charge for White, Evergreen, or primed orders. Custom color
staining is available...Call for details.
Shipping & Receiving Terms
Shipping is arranged by BrattleWorks with FedEx Ground service for Package Orders and several common carriers for Freight
Orders. Consignee must have someone present at time of delivery for the Freight carrier to deliver packages. Shipping charges
are only for transit between BrattleWorks and the “ship to” address on the Order Confirmation. Any other arrangements
between the consignee and carrier such as storage, re-delivery, or readdressing are the responsibility of the consignee.
Package Orders
This type of shipping is the most common. Check your order upon delivery for shortages or damage. Call, fax, or e-mail BrattleWorks before installation and within 5 days of delivery with any problems.
Package Orders: Such as Arbors, Planters, Treillage
East of Mississippi..........14% of Retail..........$ 13.00 minimum
West of Mississippi.........16% of Retail..........$ 18.00 minimum
Freight Orders
Product Codes with an * are shipped via a Freight carrier.
Small Freight Orders are packed in boxes. Larger Freight Orders are packed on pallets. Pallets require a fork lift or equivalent
for unloading. If a fork lift is not available notify BrattleWorks at time of Order placement and alternative packing will be
provided. You will be faxed and/or e-mailed a Shipping Confirmation when a Freight Order ships from BrattleWorks. Check
your order upon delivery. All damages or shortages must be noted on the carrier’s delivery receipt. Call, fax, or e-mail BrattleWorks before installation and within 5 days of delivery with any problems.
Freight Orders: Such as Fence Panels, Gates, large Posts
East of Mississippi..........15% of Retail..........$ 100 minimum
West of Mississippi.........17% of Retail..........$ 105 minimum
Satisfaction Guaranteed
Any standard BrattleWorks’ product may be returned. Notify BrattleWorks within 5 days of delivery and before installation.
Returns are subject to a 15% handling charge. Custom orders are non-returnable.
Disclaimer: Pictorial and typographical errors are subject to correction.
31
Chestnut Hill Pergola
Chestnut Hill Pergola is a more formal Pergola design and features round columns made from Pine or square columns made from Western Red Cedar and a multilayered roof top. BrattleWorks’ Pergolas are constructed of clear kiln dried Western
Red Cedar.
BrattleWorks’ products are available Natural, White or Evergreen. Custom colors are also available. We use Zinsser or Benjamin Moore acrylic stains and primers.
Natural cedar will weather to a silver-gray.
Bottom: Joist 2”x6”- 54”
Inside Width, 12” on center
Middle: Joist 2”x4” - 48”
Inside Width, 6” on center
Top: Stringer 2”x3” - 72” long
Round Columns: 7” x 84”
Model #90 Chestnut Hill Pergola (54” Inside Width, 48”
Inside Width & 72” Stringers)
Chestnut Hill Joist Assembly in Column
Cap
Visit our website for most current pricing and promotions!
Give Us Your Design!

Trellis - Brattleworks

Transcription

Similar documents

CLOSE BOARDED FENCING - Bouchier Fencing Limited

projectnightnight bag toppers

Commercial TOPPER

The Adventures of Permaculture Willi 3: “The Bababerry Trellis

Inspiring Surface Design

Gardening Without a Yard – Popularity in Vertical

16` x 20` SBS Caribou Hut

ConEdison Solutions, Gexa, Pepco Energy 7:30am

Stylemark Access Panels

the nightlife issue