Wormy Chestnut Reclaimed Hardwood Flooring

Olde Wood Limited
WIDE PLANK HARDWOOD FLOORING & HAND-HEWN TIMBERS
OldeWoodLtd.com | 866-208-9663
Antique
Wormy Chestnut
RECLAIMED HARDWOOD FLOORING
For centuries, the American chestnut tree was prized for its
strong, straight-grained wood that was easy to saw and split.
Sadly, during the early to mid-1900s, this once vital hardwood
timber tree was virtually destroyed in the eastern United States
by an Asian blight fungus.
SOLID FLOORING:
Our reclaimed flooring is 100% virgin timber taken
from old wooden structures such as barns and
factory buildings.
BOARD WIDTHS
3” to 12”
BOARD LENGTH
2’ to 12’
PLANK
THICKNESS
FINISH OPTIONS
FSC STATUS
3/4”, 5/8”, 1/2”, 3/8”
(5/8” up to 8” only)
(3/8”, 1/2” up to 6” only)
-
unfinished or pre-finished
authentic hand-scrape
machine hand-scrap
wire brushing
end-matching up to 10”
100% Recycled*
ENGINEERED FLOORING:
A flooring product that can be installed directly to
a concrete slab, on even or below-grade levels.
BOARD WIDTHS
3” to 12”
BOARD LENGTH
2’ to 8’
PLANK THICKNESS
WEAR LAYER
PLYWOOD
5/8” (3/4” available)
4mm
9-ply FSC Baltic Birch
FINISH OPTIONS
same as above
FSC STATUS
Mixed Species*
One of the rarest of the reclaimed hardwoods, our Antique
Wormy Chestnut hardwood flooring – prominently marked with
insect-bored wormholes – derives from roof rafters, floor joists
and granary boards in old barns, houses and factories. Choosing
this commercially extinct hardwood flooring for your home will
add a touch of elegance and a priceless piece of the American
past.
DISTINCTIVE ATTRIBUTES
With this commercially extinct wood, expect planks ranging
in color from lustrous tan to dark chocolate with an open, yet
tight grain texture. Antique Wormy Chestnut also features some
original saw marks, nail holes, sound cracks and checking.
* FSC certification available upon request.
NOTE: Each of our floors is one of a kind and possesses unique characteristics and
beauty. While our samples provide a close representation of our flooring, they are
for reference only and cannot directly match the appearance of a finished floor.
EDGE MILLING OPTIONS
Square
Round-Over
Micro-Bevel