ManuTel brochure

Transcription

ManuTel brochure
Simply brilliant - brilliantly simple!
ManuTel® manual TelescopicForks
www.forks.com
ManuTel® - the best solution for your application
Day-to-day operation requires moving of goods and pallets in various
lengths. Quite often the fork arms mounted to the lift truck are either
too short or too long.
An ideal solution is ManuTel® - the manual TelescopicFork made by
VETTER. With ManuTel® you always have the extension with you and
ready for use in no time.
Normally fork extensions are mounted, which is time-consuming and
laborious or long forks are used which limits the maneuverability of the
lift truck.
Time-consuming searching, transporting and mounting of the
conventional fork extensions is not required any more. Simply adjust
the ManuTel® fork shoe to the desired length – lock it – ready.
ManuTel® G2 Standard edition
■ Standard capacity up to 11,000 lbs @ 24“ load center, custom-made
capacities on demand
■ Ideal for truck loading and unloading from one side
■ Solid construction, suitable for all-terrain application
■ Wear-resistant straight manganese steel plate on the lower side
of the fork shoe
■ Wide product range
ManuTel® SlimLine edition
■ Extra-thin blade - thickness only 1.6“
■ Ideal for loads and pallets with small apertures
■ Quick release pin-locking device for easy length adjustment
■ Capacity up to 4,400 lbs
Application ManuTel® TelescopicForks
■ Forwarding agents and warehouses
■ Transport of furniture, sheet material, wood or paper
■ DIY stores
■ Companies with varying loading lengths
www.forks.com
ManuTel® product range
6000
5000
Capacity diagram
ManuTel® SlimLine
MTGZ-50
MTGZ-35
Tragfähigkeit (kg / Paar)
MTGZ-25
Tragfähigkeit (kg / Paar)
MTSK 20/12/18
2000
MTGZ-50-6
Capacity diagram
ManuTel® G2
MTGZ-16
4000
3000
MTSK 18/12/20
1500
1000
2000
500
1000
0
0
500
700
900
1100
1300
1500
1700
Lastschwerpunktabstand (mm)
1900
2100
2300
500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
Lastschwerpunktabstand (mm)
Type
ManuTel®
G2
Capacity /
load centre
Fork length
(retracted)
L0
Fork length
(extended)
L1
Sleeve
section
Total
weight
ISO A/B
„C of G“
retracted
ISO A/B
„C of G“
extended
ISO A/B
Art. No.
kg/mm
mm
mm
mm
kg
mm
mm
Suspension
MTGZ 16/8/12
1,600/500
800
1,200
115 x 50
45/47
263/252
356/341
ISO 2A/B
MTGZ 16/10/16
1,600/500
1,000
1,600
115 x 50
53/55
353/340
503/485
ISO 2A/B
MTGZ 16/12/18
1,600/500
1,200
1,800
115 x 50
62/64
448/434
605/586
ISO 2A/B
MTGZ 16/12/20
1,600/500
1,200
2,000
115 x 50
62/64
446/432
656/635
ISO 2A/B
MTGZ 25/8/12
2,500/500
800
1,200
135 x 55
60/66
261/251
344/330
ISO 2A/B
MTGZ 25/10/16
2,500/500
1,000
1,600
135 x 55
71/74
352/339
485/467
ISO 2A/B
MTGZ 25/12/18
2,500/500
1,200
1,800
135 x 55
82/85
446/431
585/566
ISO 2A/B
MTGZ 25/12/20
2,500/500
1,200
2,000
135 x 55
82/85
444/430
630/610
ISO 2A/B
MTGZ 25/14/24
2,500/500
1,400
2,400
135 x 55
92/95
538/523
779/757
ISO 2A/B
MTGZ 35/8/12
3,500/500
800
1,200
140 x 60
75/80
243/228
314/294
ISO 3A/B
MTGZ 35/10/16
3,500/500
1,000
1,600
140 x 60
87/92
330/311
444/419
ISO 3A/B
MTGZ 35/12/18
3,500/500
1,200
1,800
140 x 60
100/105
421/400
542/515
ISO 3A/B
MTGZ 35/12/20
3,500/500
1,200
2,000
140 x 60
100/105
420/398
581/552
ISO 3A/B
MTGZ 35/14/24
3,500/500
1,400
2,400
140 x 60
112/117
511/488
722/689
ISO 3A/B
MTGZ 50/8/12
5,000/500
800
1,200
165 x 65
97/104
246/231
310/290
ISO 3A/B
MTGZ 50/10/16
5,000/500
1,000
1,600
165 x 65
123/131
332/314
436/411
ISO 3A/B
MTGZ 50/12/18
5,000/500
1,200
1,800
165 x 65
128/136
423/401
532/505
ISO 3A/B
MTGZ 50/12/20
5,000/500
1,200
2,000
165 x 65
128/136
422/400
569/539
ISO 3A/B
MTGZ 50/14/24
5,000/500
1,400
2,400
165 x 65
144/151
514/490
705/672
ISO 3A/B
MTGZ50-6/08/12
5,000/600
800
1,200
165 x 65
110/123
220/205
275/255
ISO 4A/B
MTGZ50-6/10/16
5,000/600
1,000
1,600
165 x 65
126/133
300/285
392/372
ISO 4A/B
MTGZ50-6/12/18
5,000/600
1,200
1,800
165 x 65
141,5/149
385/370
485/465
ISO 4A/B
MTGZ50-6/12/20
5,000/600
1,200
2,000
165 x 65
141,5/149
385/370
525/505
ISO 4A/B
MTGZ50-6/14/24
5,000/600
1,400
2,400
165 x 65
157/165
472/457
648/628
ISO 4A/B
Total weight
ISO A/B
„C of G“
retracted
ISO A/B
„C of G“
extended
ISO A/B
Suspension
Type
ManuTel®
SlimLine
Capacity /
load centre
Fork length
(retracted)
L0
Fork length
(extended)
L1
Sleeve
section
Art. No.
kg/mm
mm
mm
mm
kg
mm
mm
MTSK 20/08/12
2,000/500
800
1200
143 x 40
51/54
239/228
302/288
ISO 2A/B
MTSK 20/10/16
2,000/500
1,000
1,600
143 x 40
59/62
328/313
427/410
ISO 2A/B
MTSK 20/12/18
2,000/500
1,200
1,800
143 x 40
67/70
416/401
523/504
ISO 2A/B
MTSK 18/12/20
1,800/500
1,200
2,000
143 x 40
67/70
416/401
558/538
ISO 2A/B
Product benefits ManuTel® manual TelescopicForks made by VETTER
Efficient
Truck loading and unloading from one side resp. transport of 2 or
3 pallets at once.
Safe
Always suitable fork length! No risk of accident by protruding or short
fork blades.
Solid
ManuTel® G2 offers a wear-resistant straight manganese steel plate
on the lower side of the fork shoe. Thus, it is protected against dirt,
suitable for all-terrain application and offers long operating life and
efficient application.
www.forks.com
Time and cost saving
PREVIOUSLY
fork extensions: approx. 10 minutes mounting time (search, carry, fit,
lock,... remove, carry, transport etc.)
NEW!
ManuTel® < 1 minute required (unlock, extend, lock – READY!)
= 9 minutes time saving
Based on an hourly rate of $57.00 USD (lift truck / driver) and 240
working days, savings of 2,160 minutes = $2,052,00 USD per year
– with only one change of blade length per day.
Simple
ManuTel® TelescopicForks are ready to use within seconds.
Remove the pin - Extend the fork sleeve to the required length Replace the pin - Ready! Without tools or additional hydraulic!
Legally compliant
Delivery in accordance to EC machinery directive (CE sign) including
detailed operating instruction and type plate.
1000-fold approved
Length adjustment by locking pin is 1000-fold approved in daily
operation. Worldwide. In all kind of environments.
VETTER Forks, Inc.
5785 Sunset Pike
Chambersburg, PA 17202 / USA
ISO 9001
Phone: +1 717 753 3913
Fax: +1 717 753 3915
contact@forks.com
www.forks.com
When it comes to QualityForks, think VETTER. Globally present, no. 1 in Europe. With 50 years experience of fork production.
From 1 to 120 tons load capacity and beyond, all designs and batch sizes – VETTER offers to you the complete product range “made in Germany”.
More than 30,000 active articles offer the optimal solution for your application. Parts not yet existing will be developed for you.
Beyond all international engineering and manufacturing standards VETTER QualityForks meet the highest requirements in terms of manufacturing
quality, accuracy of fit, metallurgy, welding quality and heat treatment. Flexible in production and procurement - stringent regarding quality, environmental protection and labor standards.
A continuous improvement process, investments in production, know-how and innovation as well as a long-term reliable business policy qualify
VETTER as a competent and fair partner.
© VETTER Forks, Inc. 2015
This document may not be used, copied or distributed wholly or in part to any third party without written authorisation from VETTER. All technical data, drawings, pictures in this document
are subject to technical alterations and are not part or basis for any contracts or agreements.
www.forks.com

Similar documents

DRIVEN And STATIC TOOLING MAZAK

DRIVEN And STATIC TOOLING MAZAK Adj. Angle Geared Up ERA16 Cool Thru*

More information