7-Fold Datasheet

7-fold high pressure solenoid valve
manifold DN 8
s
tion
ed solu
z
i
m
o
t
t!
r cus
Furthe upon reques
le
availab
For compresses natural gas (CNG)
Indirectly solenoid actuated
8590439
Piston valves
Consisting of:
• 3 solenoid valves to control the filling of the Low-, Middle- and High-Bank
• 3 solenoid valves to control a dispenser with one line
• 1 solenoid valve as security valve in front of the dispenser
• 6 non return valves to avoid the inflow from higher pressure levels (e. g. High Bank) to
lower pressure levels (e. g. Middle Bank)
• 2 additional non return valves for filling a car directly from the compressor via the dispenser (without needing to pre-fil the banks), necessary at highly frequented stations
• 3 filters 40 µm
Description (standard valve)
Switching function:
Flow direction:
Fluid temperature:
Ambient temperature:
Mounting position:
normally closed
determined
–20 °C up to max. +60 °C
–20 °C up to max. +50 °C
preferably,
with filter on the bottom side
Material
Valve manifold:
Seat seal:
Internal parts:
Brass
Polymer
Brass / Stainless steel / Polymer
Internal leakage acc. to DIN EN 12266-1 Leakage rate "E"
External leakage acc. to DIN EN 12266-1 Leakage rate "A"
Characteristic data
Valves
Part Number
Solenoid with 1 or 2
Nominal
Diameter (mm)
Connection size
Operating pressure (max. differential pressure)
min. (bar)
max. (bar)
Weight
(kg)
8590439.9841
8
G 1/2
10
40.00
320
Acc. to PED 97/23/EC and ATEX 94/9/EC!
D119802.01
06/13
Buschjost GmbH
Valve Technology and Systems
Detmolder Straße 256
D-32545 Bad Oeynhausen
PO Box 100252-53
D-32502 Bad Oeynhausen
Phone ++49 5731/791-0
Fax ++49 5731/791-179
www.buschjost.com
mail@buschjost.com
8590439
Solenoid 9841
Further Options (Solenoids)
Standard voltage
DC 1
AC 2
50 Hz – 60 Hz
24 V
–
–
–
230 V
–
XXXXXXX.9845 Solenoid with 10 m cable ends
Protection class according to
- II 2 G Ex mb II T4
- II 2 D Ex tD A21 IP 65 T 130 °C
Voltage range ±10 %
100 % duty cycle
Protection class acc. to EN 60529 IP65
XXXXXXX.9841
Solenoid with 3 m cable ends
Protection class according to
- II 2 G Ex mb II T4
- II 2 D Ex tD A21 IP 65 T 130 °C
Power Consumption
According to DIN VDE 0580 at coil temperature
of +20 °C. In operation the power consumption of the solenoid decreases by approx.
30 %.
Solenoid
DC 1
9841
10.1 W
7-fold high pressure solenoid valve manifold DN 8
XXXXXXX.3826 with 1/2 - 14 NPT female thread and
for DC
460 mm flying leads
Protection class according to ANSI/NEMAUSA: FM approved
(File-No. 2Z2A6.AE)
Canada: CSA certified (File-No. LR 57643-6)
Solenoids in temperature class T3C (160° C)
are usable in Ex-areas.
Class I, Division 1 and 2, Groups A-D (Gases and fumes)
Class II, Division 1 and 2, Groups E-G (dusts)
Class III, Division 1 and 2 (fibres and fluffs)
Ambient temperature: –20 °C up to +60° C
XXXXXXX.3827
for AC
with integrated rectifier
AC 2
Inrush
Holding
9.2 VA
9.2 VA
with 1/2 - 14 NPT female thread and
460 mm flying leads
Protection class according to ANSI/NEMAUSA: FM approved
(File-No. 2Z2 A6.AE)
Canada: CSA certified (File-No. LR57643-6)
Solenoids in temperature class T3C (160° C)
are usable in Ex-areas.
Class I, Division 1 and 2, Groups A-D (Gases and fumes)
Class II, Division 1 and 2, Groups E-G (dusts)
Class III, Division 1 and 2 (fibres and fluffs)
Ambient temperature: –20 °C up to +60° C
XXXXXXX.428X Solenoid with terminal box
cable gland M20 x 1.5
cable gland diameter range Ø 5-8 mm
Protection class according to
- II 2G Ex emb II T4/T5
- II 2D Ex tD A21 IP 66 T 130° C
Ambient temperature:
T4
T5
–40 °C up to +50° C
–40 °C up to +40° C
XXXXXXX.468X Solenoid with terminal box
cable gland cable gland diameter range Ø 10-14 mm
1/2 - 14 NPT
Ø 7.5-11.9 mm
Protection class according to
- II 2G Ex dmb II T4/T5
- II 2D Ex tD A21 IP 66 T 130° C
Ambient temperature:
Subject to change
T4
T5
M20 x 1.5 –40 °C up to +50° C
–40 °C up to +40° C
D119802.02 – 06/13
8590439
7-fold high pressure solenoid valve manifold DN 8
Drawings
53,5 ±1,5
1:1
43,5 ±1,5
126 ±1,5
193 ±2,5
46,9 ±1,5x35,8±1,5
78 ±1
55 ±1,5
P
117 ±1,5
D1
G1/2 x 16+2
HB
VR1
VSH
MB
VM1
95 ±2
54 ±1,5
LB
212 ±3
G1/2 x 16+2
54 ±1,5
MB
VSM
217 ±3
HB
VH1
VSL
LB
VL1
25 ±1
G1/2 x 16+2
25 ±1,5
38 ±1,5
195 ±2,5
P
55 ±1,5
56 ±1,5
D1
D119802.03 – 06/13
Subject to change
39 ±2