Description

Transcription

Description
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
1
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Table of Contents
SECTION
DESCRIPTION
PAGE #
SECTION 1
SCRAPERS
3
SECTION 2
CYLINDERS
96
SECTION 3
HUBS
145
SECTION 4
YOKES & HITCHES
170
SECTION 5
VALVES
192
SECTION 6
WHEELS
203
SECTION 7
BLADES & BITS
215
SECTION 8
DRAWBARS
219
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
2
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 1
Scraper
Reference
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
3
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CAMECO 12C
12’ Cutting Width
ITEM
1
2
OR
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
PART#
B944-B-kd
D650-kd
D650-02-kd
37000535-kd
110033234-kd
N/A
1950095177-kd
RF01022-00241-kd
RF05031-00130-kd
RF03021-00240-kd
1950096325-kd
RF01022-00180-kd
N/A
N/A
N/A
N/A
1950095165-kd
290095104-kd
290095439-kd
1950095435-kd
1950095226-kd
50023648-kd
RF05031-00120-kd
290095101-kd
50010030-kd
50010041-kd
10095200-kd
1950095436-kd
50010017-kd
DESCRIPTION
QTY
YOKE ASSEMBLY
1
HITCH ASSEMBLY
1
HITCH ASSEMBLY
1
GREASE ZERK
REF
BALL SOCKET
1
N/A
N/A
HITCH
1
1'' x 5.5'' bolt GR 8
7
1'' Lock Washer
7
1'' Nut
7
TOUNGUE ASS'Y
REF
1" x 3.5" BOLT, gr. 8
14
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
BRACE ASS'Y
2
PIN, 1.75 x 8"
2
BUSHING
2
C-FRAME ASS'Y
1
CLAMP ASS'Y
2
BOLT, .625 x 1.25"
10
LOCK WASHER .625" 10
PIN, 1.75 x 8.25"
2
BOLT, .50 x 3.25"
4
NUT. .50"
4
FRAME CYL.
2
WHEEL & TIRE
4
BOLT, .50 x 1.25"
2
ITEM
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
PART#
50010042-kd
620005665-kd
1950095309-kd
880053858-kd
N/A
1950095362-kd
1950095437-kd
1950095060-kd
10095224-kd
1950095081-kd
1950095065-kd
1950095066-kd
50010043-kd
1950095084-kd
10095191-kd
290094777-kd
50010020-kd
50033371-kd
50010218-kd
1950095080-kd
290095209-kd
290095210-kd
290095227-kd
1020346-kd
R658-kd
R658-kd
R658-kd
R659-kd
D832-kd
DESCRIPTION
QTY
LOCK WASHER, .50"
16
LOCK NUT, .50"
16
HOSE HOLDER ASS'Y
1
HOSE
4
N/A
N/A
HYDRAULIC GRP REAR
1
HYDRUALIC GRP FRONT
1
CYL. MOUNT ASS'Y
1
GATE CYLINDER
1
GATE ASS'Y, FRONT
1
PLATE ASS'Y, LEFT
1
PLATE ASS'Y, RIGHT
1
WASHER, .50"
16
BUCKET ASS'Y
1
DUMP CYLINDER
2
GUARD ASS'Y
1
BOLT, .50 x 1.25"
14
BOLT, 1.5 x 4.5"
1
NUT, 1.5"
1
FRAME ASS'Y, REAR
1
CLAMP, LEFT
1
CLAMP, RIGHT
1
SPACER
2
FROST BIT
1
BLADE BOLT, NUT, L/W
10
SAME AS ITEM 53
10
SAME AS ITEM 53
10
FROST BIT BOLT
10
BLADE, 8 x 144"
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
4
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
14 yd³, 16 yd³, S150 & S175 Models
Pin Placement Chart
Item
1
OR
2
&
OR
3
OR
4
OR
5
OR
&
OR
&
6
&
7
8
9
OR
Part #
1063527-kd
1063527-02-kd
7001-H023-kd
7001-H024-kd
1022953-979
CH-kd
WH-kd
7001-H017A-kd
BC-4-kd
C112-kd
99-3086-3-kd
99-3086-2-kd
99-4224-kd
99-4223-kd
4T-2963-kd
4T-2964-kd
7001-H028-kd
HA-1-kd
T1-kd
B1925HTN95-kd
Description
YOKE ASS’Y, 1.5” Drawbar Pin
YOKE ASS’Y, 2” Drawbar Pin
FRAME CYL, 5” BORE, LH
FRAME CYL, 5” BORE, RH
FRAME CYL, 6” BORE, LH & RH
HUB ASS’Y, 3 TIRE SETUP
HUB ASS’Y, 6 TIRE SETUP
DUMP CYL, 3.5” BORE
DUMP CYL, 4” BORE
BLADE, (8 x 144”)
CENTER BLADE (10 x 40")
OUTSIDE BLADE (8 x 40")
CENTER BLADE (12 x 40")
OUTSIDE BLADE (10 x 40")
WEAR BLADE (LEFT SIDE)
WEAR BLADE (RIGHT SIDE)
GATE CYLINDER, 5” BORE
HITCH ASS’Y
WHEEL, 9 x 24”
WHEEL, 23.5 x 25”
Qty
1
1
1
1
2
3
6
2
2
1
1
2
1
2
1
1
1
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
5
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
6 Tire Wheel Frame
Item
Part #
Description
Qty
1
6-10WF1-kd
WHEEL FRAME ASS’Y
1
2
HW1-13-kd
BOLT, 3/4 x 3" gr 8
24
3
HW3-4-kd
LOCK WASHER, 3/4"
24
4
P5-kd
WHEEL FRAME PIVOT PIN
2
5
HW8-1-kd
SPACER, 5/8"
2
6
HW4-3-kd
FLAT WASHER, 5/8"
4
7
HW1-10-kd
BOLT, 5/8 x 1 1/2" gr 8
4
8
P6-kd
WHEEL FRAME CYL. PIN
2
9
WF36-kd
AXLE BRACKET CAP
12
10
WF37-kd
AXLE BRACKET (WELD ON)
12
11
WFH1-kd
REAR HITCH SUBASSY
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
6
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
3 Tire Wheel Frame
Item
1
2
3
4
5
6
7
8
9
10
11
Part #
65-CSWF1-kd
HW1-20-kd
HW3-7-kd
P5 -kd
HW8-1-kd
HW4-3-kd
HW1-10-kd
P6-kd
CS9-D-kd
CS8-D-kd
CS48-D-kd
Description
WHEEL FRAME ASSY
BOLT 1 x 4 3/4" gr8
LOCK WASHER 1"
WHEEL FRAME PIVOT PIN
SPACER 5/8"
FLAT WASHER 5/8"
BOLT 5/8 x 1 1/2" gr8
WHEEL FRAME CYL. PIN
WHEEL FRAME AXLE BRKT. CAP
WHEEL FRAME AXLE BRKT.
WHEEL FRAME HITCH BRKT.
Qty
1
12
12
2
2
4
4
2
6
6
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
7
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
2 Tire Wheel Frame
Item
1
2
3
4
5
6
7
8
9
10
11
Part #
65-LPGWF1-kd
4J8622-kd
9H1031-kd
P5-kd
HW8-1-kd
HW4-3-kd
HW1-10-kd
P6-kd
P2BS2303R-kd
HW3-6-kd
HW2-9-kd
Description
WHEEL FRAME ASSY
BEARING MTG. BRKT.
BEARING MTG. WASHER
WHEEL FRAME PIVOT PIN
SPACER 5/8"
FLAT WASHER 5/8"
BOLT 5/8 x 1 1/2" gr8
WHEEL FRAME CYL. PIN
PILLOW BLOCK BEARING
LOCK WASHER 7/8"
NUT 7/8"
Qty
1
8
8
2
2
4
4
2
4
8
8
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
8
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
Gate Lifting Arm
Item
Part #
Description
Qty
1
65-GT4-kd
GATE LIFT ARM ASSY
1
2
P2-kd
GATE CYL. GUARD PIN
2
3
P1-kd
GATE LIFT PIN
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
9
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
Gate Assembly
Item
Part #
Description
Qty
1
65-10GT1-kd
GATE ASSY
1
2
65-10GT2-kd
LOWER GATE SUBASSY
1
3
65-10GT3-kd
UPPER GATE SUBASSY
1
4
R653-kd
1 3/4" ID SELF ALIGNING EYE
3
5
G9-kd
GATE CUTTING EDGE
1
6
G7-kd
GATE HINGE
8
7
G8-kd
GATE HINGE BAR
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
10
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
Bowl Assembly & Cutting Edge Options
Item
1
2
3
4
5
6
7
8
9
10
11
Part #
65-S175PAN1-kd
HW5-2-kd
P4-kd
HW4-5-kd
HW2-4-kd
R653-kd
CE1/C112-kd
R658-kd
R659-kd
CE-2-kd
R659-kd
Description
PAN ASSY
GRADE 5 CARRIAGE BOLT, 1/2 x 2"
BUCKET CYL. PIN
FLAT WASHER, 5/8"
NUT, 5/8"
1 3/4" ID SELF ALIGNING EYE
CUTTING EDGE 3/4 x 8” x 119 1/2”
BOLT ASSY (BOLT, NUT, & FLATWASHER)
BOLT ASSY (REQ. 4 MORE w/ FROST BIT)
w/ FROST BIT (optional)
BOLT ASSY (BOLT, NUT, & FLATWASHER)
Qty
1
2
2
2
2
2
1
12
4
1
8
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
11
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 10’ WIDE SCRAPERS
Cutting Edge Option
Item
1
OR
2
OR
Part #
Description
Qty
99-3086-3-kd
CENTER BLADE (10 x 40")
1
99-4224-kd
CENTER BLADE (12 x 40")
1
99-3086-2-kd
OUTSIDE BLADE (8 x 40")
2
99-4223-kd
OUTSIDE BLADE (10 x 40")
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
12
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
17C & S180 Models
Item
1
OR
2
&
OR
3
OR
4
OR
5
OR
&
OR
&
6
&
7
8
9
OR
Part #
1063527-kd
1063527-02-kd
7001-H023-kd
7001-H024-kd
1022953-979
CSH4-kd
WH-kd
7001-H017A-kd
BC-4-kd
1022327-kd
99-4905-kd
99-4904-kd
KD30-kd
KD31-kd
4T-2963-kd
4T-2964-kd
7001-H028-kd
HA-1-kd
T1-kd
2517029-kd
Description
YOKE ASS’Y, 1.5” Drawbar Pin
YOKE ASS’Y, 2” Drawbar Pin
FRAME CYL, 5” BORE, LH
FRAME CYL, 5” BORE, RH
FRAME CYL, 6” BORE, LH & RH
HUB ASS’Y, 4 TIRE SETUP
HUB ASS’Y, 6 TIRE SETUP
DUMP CYL, 3.5” BORE
DUMP CYL, 4” BORE
BLADE (10 x 144”)
CENTER BLADE (12 x 48")
OUTSIDE BLADE (10 x 48")
CENTER BLADE (12 x 76")
OUTSIDE BLADE (10 x 34")
WEAR BLADE (LEFT SIDE)
WEAR BLADE (RIGHT SIDE)
GATE CYLINDER, 5” BORE
HITCH ASS’Y
WHEEL, 9 x 24”
WHEEL, 20.5 x 25”
Qty
1
1
1
1
2
3
6
2
2
1
1
2
1
2
1
1
1
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
13
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
6 Tire Wheel Frame
Item
Part #
Description
Qty
1
6-12WF1-kd
WHEEL FRAME ASS’Y
1
2
HW1-13-kd
BOLT, 3/4 x 3" gr 8
24
3
HW3-4-kd
LOCK WASHER, 3/4"
24
4
P5-kd
WHEEL FRAME PIVOT PIN
2
5
HW8-1-kd
SPACER, 5/8"
2
6
HW4-3-kd
FLAT WASHER, 5/8"
4
7
HW1-10-kd
BOLT, 5/8 x 1 1/2" gr 8
4
8
P6-kd
WHEEL FRAME CYL. PIN
2
9
WF36-kd
AXLE BRACKET CAP
12
10
WF37-kd
AXLE BRACKET (WELD ON)
12
11
WFH1-kd
REAR HITCH SUBASSY
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
14
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
4 Tire Wheel Frame
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part #
4-CSWF3-kd
HW1-21-kd
HW4-9-kd
HW2-10-kd
P5-kd
HW8-1-kd
HW4-3-kd
HW1-10-kd
P6-kd
CS62-kd
CS63-kd
WFH3-kd
CS49-kd
Description
Qty
WHEEL FRAME ASSY
BOLT, 3/4 x 5 1/2" gr8
FLAT WASHER, 3/4"
SQUARE NUT, 3/4"
WHEEL FRAME PIVOT PIN
SPACER, 5/8"
FLAT WASHER, 5/8"
BOLT, 5/8 x 1 1/2" gr 8
WHEEL FRAME CYL. PIN
WHEEL FRAME AXLE BRACKET CAP
WHEEL FRAME AXLE BRACKET
WHEEL FRAME HITCH SUBASSY
C.S. WHEEL FRAME HITCH BRACKET
1
16
16
16
2
4
4
4
2
8
8
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
15
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
Gate Lifting Arm
Item
Part #
Description
Qty
1
65-GT4-kd
GATE LIFT ARM ASSY
1
2
P2-kd
GATE CYL. GUARD PIN
2
3
P1-kd
GATE LIFT PIN
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
16
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
Gate Assembly
Item
Part #
Description
Qty
1
65-12GT1-kd
GATE ASSY
1
2
65-12GT2-kd
LOWER GATE SUBASSY
1
3
65-12GT3-kd
UPPER GATE SUBASSY
1
4
R653-kd
1 3/4" ID SELF ALIGNING EYE
3
5
G9-kd
GATE CUTTING EDGE
1
6
G7-kd
GATE HINGE
8
7
G8-kd
GATE HINGE BAR
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
17
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
Bowl Assembly & Cutting Edge Options
Item
1
2
3
4
5
6
7
8
9
10
11
Part #
65-S180PAN1-kd
HW5-2-kd
P4-kd
HW4-5-kd
HW2-4-kd
R653-kd
1022327-kd
R658-kd
R659-kd
9117788-kd
R659-kd
Description
PAN ASSY
GRADE 5 CARRIAGE BOLT, 1/2 x 2"
BUCKET CYL. PIN
FLAT WASHER, 5/8"
NUT, 5/8"
1 3/4" ID SELF ALIGNING EYE
CUTTING EDGE 3/4 x 10” x 144”
BOLT ASSY (BOLT, NUT, & FLATWASHER)
BOLT ASSY (FROST BIT OPTION)
w/ FROST BIT (optional)
BOLT ASSY (BOLT, NUT, & FLATWASHER)
Qty
1
2
2
2
2
2
1
12
7
1
8
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
18
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO 12’ WIDE SCRAPERS
Cutting Edge Option
Item #
1
OR
2
OR
Part #
Description
Qty
99-4905-kd
CENTER BLADE (3/4 x 12 x 48")
1
KD30-kd
CENTER BLADE (3/4 x 12 x 76")
1
99-4904-kd
OUTSIDE BLADE (3/4 x 10 x 48")
2
KD31-kd
OUTSIDE BLADE (3/4 x 10 x 34")
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
19
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCE
12, 14, 16’ Cutting Width
ITEM
PART
A B944-B-kd
D650-kd
B MS0030ZB-kd
C MS12100AZ-kd
MS14100AZ-kd
MS16100AZ-kd
D MS00030ZD-kd
E MS00030ZE-kd
F MS00030ZF-kd
G MS00030ZG-kd
H MS00170AZ-kd
I 1022327-kd
1024205-kd
MS16320ZZ-kd
J R658-kd
DESCIRPTION
Yoke Assembly
Hitch Assembly
1" x 6" hex w/ lock washer and nut
12' Tongue/Front Tube Assembly
14' Tongue/Front Tube Assembly
16' Tongue/Front Tube Assembly
5/8" x 1 1/2" Bolt ASS'Y
1" x 3" Bolt ASS'Y
Front Tube Pivot Pin
5/8" x 1 1/2" Bolt ASS'Y
Floor Gusset
12' Blade
14' Blade
16" Blade
5/8" x 1 1/2" Plow Bolt ASS'Y
12' Model
14' Model
16' Model
QTY
1
5
1
1
1
12
24
2
2
2
1
1
1
ref
11
13
16
ITEM
K
L
M
N
or
or
O
or
P
Q
R
S
T
U
PART
MS00205CZ-kd
MS00201AZ-kd
MS00204ZZ-kd
MS12140AZ-kd
MS14140AZ-kd
MS16140AZ-kd
MS00239BZ-kd
MS00239BZ-kd
MS00030ZP-kd
MS00030ZQ-kd
MS00030ZR-kd
R658-kd
MS00030ZT-kd
MS00030ZU-kd
DESCIRPTION
Bridge
Tower
Ladder Handrail
12' Ejector Wall
14' Ejector Wall
16' Ejector Wall
Side Cover - Right
Side Cover - Left
1/2" x 1 1/2" Bolt ASS'Y
5/16" x 1 3/4" Bolt ASS'Y
5/8" x 1 3/4" Bolt ASS'Y
5/8" x 2" plow bolt
Decal
ID Plate
REF
REF
REF
REF
7001-H021-kd
MS00044ZZ-kd
MS00038-kd
R619-kd
Frame Cylinder
Ejection Cylinder
Hub Assembly
Wheel Assembly
QTY
1
1
2
1
1
1
1
1
10
4
8
8
2
1
2
2
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
20
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCE
Sidewall Assembly
ITEM
PART
A MS00223BA-kd
MS00221BA-kd
B MS00032ZB-kd
C MS00032ZC-kd
D C071-503-kd
E MS00032ZE-kd
F MS00032ZF-kd
G MS00237CC-kd
H MS00238ZA-kd
I 1022081-kd
J 1021678-kd
K MS00237CD-kd
L MS00032ZL-kd
DESCIRPTION
QTY
Ejector Guide Plate - Right
1
Ejector Guide Plate - Left
1
1/2" x 1 1/2" Bolt ASS'Y
8
1/2" x 2" Bolt ASS'Y
12
Pin, 1 x 4”
4
5/8" x 1 1/2" Bolt ASS'Y
4
3/8"x 3/4" Bolt ASS'Y
8
Containment Plate
4
Horizontal Roller
4
Bushing
4
Thrust Washer
4
Horizontal Roller Shaft Weldment
4
1/2" X 1 1/2" Bolt ASS'Y
32
ITEM
M
N
O
P
Q
R
S
T
U
V
W
X
PART
1021764-kd
1021678-kd
1022081-kd
1021648-kd
MS00226BA-kd
MS00233CA-kd
MS00245AZ-kd
MS00044ZZ-kd
MS00032ZT-kd
MS00032ZV-kd
MS00129ZZ-kd
D896-kd
D895-kd
1022177-kd
DESCIRPTION
Vertical Roller Shaft
Spacer
Bushing
Vertical Roller
Mounting Plate-Right
Mounting Plate-Left
Wear Plate
Ejector Cylinder
5/8"x 2" Bolt ASS'Y, Carriage
3/4"x 2 3/4" Bolt ASS'Y
Rear Router Bit
Front Router Bit-Right
Front Router Bit-Left
Roller Track
QTY
4
4
4
4
1
1
2
2
32
8
2
1
1
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
21
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCE
Walking Tandem Assembly
ITEM
PART
A MS00260BZ-kd
MS00266BZ-kd
B MS00034ZB-kd
C MS00034ZC-kd
D MS00262BCv
E MS00034ZE-kd
F MS00038ZA-kd
G H33-kd
H MS00270BF-kd
I MS00034ZI-kd
J MS00270BZ-kd
K P15-kd
L MS00034ZL-kd
M 7001-H021-kd
DESCRIPTION
Tandem Axle Carrier-Right
Tandem Axle Carrier-Left
1" x 5 1/4" Jack bolt w/ jam nut
3/4" x 1 3/4" Bolt Assy
Bushing
3/4" x 5 1/2" Bolt Assy
Spindle
Carrier Pin
Bushing
5/8"X1 1/4" hex w/ washer
Carrier Arm
Cylinder Pin
5/8"X1" Bolt Assy
Lift Cylinder
QTY
1
1
4
8
4
4
4
2
4
2
2
4
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
22
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) ES
PLEASE REFER TO THE IMC ES SERIES SCRAPER FOR PARTS LISTINGS ON
THE HARVEY (HMC) ES SERIES SCRAPERS. ALSO NOTE THE FOLLOWING
CHANGES AND OPTIONS AVAILABLE FOR THE HARVEY ES SERIES SCRAPER
BELOW.
•
WALKING TANDEM ASSEMBLY: REFER TO THE HARVEY (HMC) LCEG/MG
SERIES SCRAPER WALKING TANDEM ASSEMBLY PIN AND BUSHING SETUP.
ALSO NOTE ON SOME LATER MODEL HARVEY (HMC) ES SERIES SCRAPERS
THE WALKING TANDEM ASSEMBLY WAS CONVERTED TO A BEARING &
SPINDLE SETUP. PLEASE CALL FOR PRICING AND AVAILABILITY OF THESE
COMPONENTS.
•
HUB ASSEMBLY: REFER TO PART NUMBER MG00904-8K-kd &
MG00904-10K-kd UNDER HUB ASSEMBLIES SECTION. YOU MAY ALSO
UPGRADE TO THE WTHA-kd HUB ASSEMBLY IF THE WHEEL TAKES 3/4” LUG
BOLTS.
•
FLOOR GUSSETS: THE HARVEY (HMC) ES SERIES SCRAPER MAY REQUIRE
TWO DIFFERENT ANGLE FLOOR GUSSETS (PART # MS00170AZ-kd).
PLEASE CALL FOR PRICING AND AVAILABILITY.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
23
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCEG/MG
12 & 14 ft wide
ITEM
A
&
B
C
or
D
E
F
G
or
or
H
or
PART #
B944-B-kd
D650-kd
REF
MG12-120-kd
MG14-120-kd
REF
M000-005-kd
REF
R658
REF
REF
1022327-kd
1024205-kd
DESCRIPTION
Yoke Assembly
Hitch Assembly
1"x 7" Bolt Assy
12' Tongue/Front Tube Assembly
14' Tongue/Front Tube Assembly
1"x 3 1/2" Bolt Assy
Front Tube Pivot Pin
5/8"x 1 1/2" Bolt Assy
5/8"x 1 1/2" Bolt Assy, Plow
MG12
MG14
12' Blade
14' Blade
PART #
MG00-907-kd
7001-H028-kd
MG00-906-kd
MG00904-10K-kd
MG00904-8K-kd
MG00904AN-kd
QTY
1
1
5
1
1
16
2
2
REF
11
13
1
1
ITEM
I
or
J
or
K
or
L
M
N
O
&
PART #
MG12-260-kd
MG14-260-kd
MG12-240-kd
MG14-240-kd
MG12-300-kd
MG14-300-kd
MG00-302-kd
REF
REF
D895-kd
D896-kd
DESCRIPTION
GATE CYLINDER
FRAME CYLINDER
EJECTION CYLINDER
HUB ASSEMBLY, 10K
HUB ASSEMBLY, 8K
WHEEL ASSEMBLY, 10K
DESCRIPTION
Laser Tower
Laser Tower
12' Ejector Wall
14' Ejector Wall
12' Gate
14' Gate
Gate pivot assembly
ID Plate
Decal
Router Bit, Left
Router Bit, Right
QTY
1
1
1
1
1
1
1
1
2
1
1
QTY
1
2
1
4
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
24
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCEG/MG
EJECTION ASSEMBLY
Item
Part #
A MG12-140-kd
MG14-140-kd
B MG12-240-kd
MG14-240-kd
C MG00-600-kd
D M000-430-kd
E REF
F FHR-3-kd
G REF
H MG00-618-kd
MG00-631-kd
I
J REF
K MG00-160-kd
L REF
M MG00-906-kd
N M000-415-kd
O REF
P MG00-164-kd
Q MG00-322-kd
R MG00-324-kd
S MG00-635-kd
T MG00-620-kd
Description
MG12 Rear Frame
MG14 Rear Frame
MG12 Ejector Wall
MG14 Ejector Wall
Scissor Assembly
Scissor Pin
5/8" x 1 1/2" hex w/ lock washer
McGill Roller FCF-3
1 1/4-12 Thin Nut w/ lock washer
Ejector Wall Roller Guide
Pin w/ Grease Way
5/8" x 1 1/2" hex w/ lock washer
Ejector Base Plate Assembly
1" x 4" hex w/ lock washer
Ejector Cylinder
Cylinder Pin
5/8" x 1 1/2" hex w/ lock washer
Bushing
Nylon wear bars
Polyurethane wipers
Scissor Center Bushing
Roller Guide on Tube
Qty
1
1
1
1
1
1
1
4
4
2
4
5
1
8
1
1
1
2
4
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
25
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCEG/MG
WALKING TANDEM ASSEMBLY
Item
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Part #
MG00-240-kd
MG00-236-kd
MG00-904AA-kd
MG00-239ZZ-kd
MG00-242-kd
MG00-242ZC-kd
MG00-242ZD-kd
MG00-220-kd
M000-005ZB-kd
M000-016-kd
7001-H028-kd
M000-012AC-kd
REF
B187-kd
REF
Description
Tandem Axle Carrier-Right
Tandem Axle Carrier-Left
Spindle
Bushing
Tandem Pivot Arm
Bushing
1" x 5 1/4" Jack bolt w/ jam nut
Carrier Arm
Pin
Pin w/ Nut
Lift Cylinder
Cylinder Pin
5/8" x 1 1/2" hex w/washer
Pin w/ Nut
5/8" x 1 1/2" hex w/ washer & nut
Qty
1
1
4
2
2
4
8
2
2
2
2
4
4
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
26
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HARVEY (HMC) LCEG/MG
GATE ASSEMBLY
*
*
*
Item
A
12'
14'
B
12'
14'
C
12'
14'
D
E
F
G
H
I
J
K
Part #
Description
Qty
MG12-308-kd
MG14-308-kd
Gate top section
Gate top section
1
1
MG12-314-kd
MG14-314-kd
Gate bottom section
Gate bottom section
1
1
MG12-308-kd
MG14-308-kd
M000-012AC-kd*
M000-423-kd
MG00-302-kd
M000-012BE-kd*
M000-423-kd
M000-014-kd
MG00-907-kd
MG00-136-kd
Gate pivot shaft
Gate pivot shaft
Pin (1.43 x 4.5”)
Bushing
Gate pivot assembly
Pin (1.43 x 8”)
Bushing
Pin (B138-kd SPCL)
Gate Cylinder
Cylinder Clevis
1
1
2
2
1
4
4
2
1
1
*M000-012AC-kd & M000-012BE-kd can be interchanged
depending on the length required for the Gate Pivot Assembly
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
27
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LS
12, 14, 16, 18 & 20 ft. WIDE
ITEM #
A
B
C
D
E
F
G
H
I
J
K
L
M
N
REF
REF
REF
PART #
B944-B-kd
D650-kd
RF01022-00241-kd
LS-101-kd
B708-kd
B812-kd
B876-kd
D502-kd
B612-kd
LS-106-kd
LS-203-kd
REF
REF
REF
R658-kd
LS-104-kd
REF
DECAL
LS-102-kd
1020068-kd
1021161-kd
7001-H021-kd
PART DESCRIPTION
YOKE ASSEMBLY
HITCH ASSEMBLY
1" x 5.5" BOLT ASS’Y
TONGUE TUBE ASS’Y
BLADE LS 12’
BLADE LS 14’
BLADE LS 16’
BLADE LS 18’
BLADE LS 20’
ANGLE STRUT
HYDRAULIC TUBING CHANNEL
7/8” x 2 1/2” GR. 8 BOLT
1/2” x 1 1/2” GR. 8 BOLT
1” x 3” GR. 8 BOLT
BOLT, NUT, LOCK WASHER
LASER TOWER
3/4” x 2” GR. 8 BOLT
SERIAL NUMBER TAG
LS SIDEWALL
HUB ASSEMBLY
SPINDLE ASSEMBLY
FRAME CYLINDER
QTY
1
1
5
1
1
1
1
1
2
2
1
8
4
8
REF
1
4
1
2
4
4
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
28
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LS
Scraper Assembly
ITEM
A
B
C
D
PART #
LS-102-kd
LS-106-kd
LS-203-kd
LS-102-kd
PART DESCRIPTION
Tongue Assembly
Angle Strut
Hydraulic Line Bracket
LS Sidewall
QTY
1
2
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
29
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LS
Sidewall Assembly
ITEM
A
B
C
D
E
F
G
PART #
LS-103-kd
Ref.
RF01031-00120-kd
1022421T-kd
RF01031-00120-kd
D309-kd
D310-kd
LS-102-kd
PART DESCRIPTION
Tandem Shaft End Cap
5/8” x 2”, grade 8 Bolt
Bolt, Nut, Lock Washer
Rear Router Bit
Bolt, Nut, Lock Washer
Router Bit (Left)
Router Bit (Right)
LS Sidewall
QTY
2
8
4
2
8
1
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
30
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LS
Walking Tandem Assembly
ITEM
A
B
C
D
E
F
G
H
I
J
K
L
M
PART #
MS00-260BZ-kd
MS00-266BZ-kd
MS00-034ZB-kd
MS00-034ZC-kd
MS00-262BC-kd
MS00-034ZE-kd
MS00-038ZA-kd
H33-kd
MS00-270BF-kd
TCAB-kd
LS105-kd
P15-kd
WFCPB-kd
7001-H021SPCL-kd
PART DESCRIPTION
Tandem Axle Carrier-Right
Tandem Axle Carrier-Left
1"X5 1/4" Jack bolt w/ jam nut
3/4"X1 3/4" w/ washer & nut
Bushing
3/4"X5 1/2" hex w/ washer & nut
Spindle
Tandem Pivot Pin
Bushing
Bolt, Nut, Lock Washer
Tandem Carrier Arm Assy
Cylinder Pin
Retainer Bolt
Lift Cylinder (4" x 16")
QTY
1
1
4
8
4
4
4
1
4
6
2
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
31
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LCE
12, 14 & 16 ft wide
ITEM
PART #
A B944-B-kd
B D650-kd
REF
C MS12100AZ-kd
MS14100AZ-kd
MS16100AZ-kd
D MS00030ZD-kd
E MS00030ZE-kd
F MS00030ZF-kd
G MS00030ZG-kd
H MS00170AZ-kd
I
1022327-kd
1024205-kd
MS16320ZZ-kd
J R658-kd
REF
DESCRIPTION
Yoke ASS'Y
Hitch ASS'Y
1" x 5.5" Bolt ASS'Y
12' Tongue ASS'Y
14' Tongue ASS'Y
16' Tongue ASS'Y
5/8"x 1 1/2" Bolt ASS'Y
1"x3" Bolt ASS'Y
Front Tube Pivot Pin
5/8"x 1 1/2" Bolt ASS'Y
Floor Gusset
12' Blade
14' Blade
16' Blade
5/8"X 2" Bolt ASS'Y
12' Model
REF
REF
REF
REF
7001-H021-kd
MS00044ZZ-kd
MS00038-kd
R619-kd
QTY
1
1
5
1
1
1
12
24
2
2
2
1
1
1
11
ITEM
K
L
M
N
O
P
Q
R
S
T
U
PART #
REF
REF
LT-kd
MS00201AZ-kd
MS00204ZZ-kd
MS12140AZ-kd
MS14140AZ-kd
MS16140AZ-kd
MS00239BZ-kd
REF
REF
REF
R658-kd
R659-kd
DECAL
ID PLATE
Frame Cylinder
Ejection Cylinder
Hub Assembly
Wheel Assembly
DESCRIPTION
QTY
14' Model
13
16' Model
16
Bridge
1
Tower
1
Ladder Handrail
2
12' Ejector Wall
1
14' Ejector Wall
1
16' Ejector Wall
1
Side Cover - Right
1
Side Cover - Left
1
1/2"x1 1/2" Bolt ASS'Y
10
5/16"x1 3/4" Bolt ASS'Y
4
5/8"x2" Bolt ASS'Y, Plow
8
5/8"X2.5" Bolt ASS'Y, Plow
8
Decal
2
ID Plate
1
2
2
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
32
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LCE
Sidewall Assembly
ITEM
PART
A MS00223BA-kd
MS00221BA-kd
B MS00032ZB-kd
C MS00032ZC-kd
D C071-503-kd
E MS00032ZE-kd
F MS00032ZF-kd
G MS00237CC-kd
H MS00238ZA-kd
I 1022081-kd
J 1021678-kd
K MS00237CD-kd
L MS00032ZL-kd
DESCIRPTION
QTY
Ejector Guide Plate - Right
1
Ejector Guide Plate - Left
1
1/2" x 1 1/2" Bolt ASS'Y
8
1/2" x 2" Bolt ASS'Y
12
Pin, 1 x 4”
4
5/8" x 1 1/2" Bolt ASS'Y
4
3/8"x 3/4" Bolt ASS'Y
8
Containment Plate
4
Horizontal Roller
4
Bushing
4
Thrust Washer
4
Horizontal Roller Shaft Weldment
4
1/2" X 1 1/2" Bolt ASS'Y
32
ITEM
M
N
O
P
Q
R
S
T
U
V
W
X
PART
1021764-kd
1021678-kd
1022081-kd
1021648-kd
MS00226BA-kd
MS00233CA-kd
MS00245AZ-kd
MS00044ZZ-kd
MS00032ZT-kd
MS00032ZV-kd
MS00129ZZ-kd
D896-kd
D895-kd
1022177-kd
DESCIRPTION
Vertical Roller Shaft
Spacer
Bushing
Vertical Roller
Mounting Plate-Right
Mounting Plate-Left
Wear Plate
Ejector Cylinder
5/8"x 2" Bolt ASS'Y, Carriage
3/4"x 2 3/4" Bolt ASS'Y
Rear Router Bit
Front Router Bit-Right
Front Router Bit-Left
Roller Track
QTY
4
4
4
4
1
1
2
2
32
8
2
1
1
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
33
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC LCE
Walking Tandem Assembly
ITEM
PART
A MS00260BZ-kd
MS00266BZ-kd
B MS00034ZB-kd
C MS00034ZC-kd
D MS00262BCv
E MS00034ZE-kd
F MS00038ZA-kd
G H33-kd
H MS00270BF-kd
I MS00034ZI-kd
J MS00270BZ-kd
K P15-kd
L MS00034ZL-kd
M 7001-H021-kd
DESCRIPTION
Tandem Axle Carrier-Right
Tandem Axle Carrier-Left
1" x 5 1/4" Jack bolt w/ jam nut
3/4" x 1 3/4" Bolt Assy
Bushing
3/4" x 5 1/2" Bolt Assy
Spindle
Carrier Pin
Bushing
5/8"X1 1/4" hex w/ washer
Carrier Arm
Cylinder Pin
5/8"X1" Bolt Assy
Lift Cylinder
QTY
1
1
4
8
4
4
4
2
4
2
2
4
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
34
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
12, 14 & 16 ft wide
Item
Part #
Description
Qty
B944-B-kd
Yoke Assembly
1
D650-kd
Hitch Assembly
1
2
12E/14E/16E-TA-kd
12E/14E/16ETongue Assembly
1
3
B185-kd
Carriage Pin Assembly
2
4
MFC-12E/14E/16E-kd
12E/14E/16E Main Frame Carriage
1
5
LBA-12E/14E/16E-kd
12E/14E/16E Laser Bracket Assembly
1
6
12E/14E/16E-SW-kd
12E/14E/16E Side Wall (Right or Left)
Ref
7
HW5-3-kd
Carriage Bolt Assy.
Ref
1
REF 6025145-kd
Ejector Cylinder
1
REF 7001-H028-kd
Frame Cylinder
2
REF WTHA-kd
Hub Assembly
4
REF T-16E-kd
Tire (22.5L x 16.1)
4
REF R-16E-kd
Rim
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
35
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Blade Assembly
Item #
Part #
1 (16E)
MS16320ZZ
Blade (3/4 x 10 x 192”), Double Bevel Flat
1
(14E)
1024205
Blade (3/4 x 10 x 168”), Double Bevel Flat
1
(12E)
1022327
Blade (3/4 x 10 x 144”), Double Bevel Flat
1
R658
Bolt Assy.
20
1A
Description
Qty
2
D309**
Router Bit, LH
1
&
D310**
Router Bit, RH
1
3
RRB1
Rear Router Bit
2
4
LBA-12E/14E/16E
12E/14E/16E Laser Bracket Assy
1
*Note: On some Harvey (HMC) & IMC 16 ES scrapers the
D309-kd/D310-kd (4 hole) router bits are replaced with
D895-kd/D896-kd (6 hole) router bits.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
36
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Walking Tandem Assembly
Item
Part #
Description
Qty
Item
Part #
Description
Qty
1
E1-L/E1-R-kd
Pivot Tandem
1
10 R663-kd
Hub Seal
2
2
ETPS-kd
Tandem Pivot Support
1
11 R666-kd
Lock Washer
2
3
ETB-kd
Bushings
2
12 R665-kd
Lock Nut
2
4
ETC-kd
Rear Carrier
1
13 TAC-06-kd
Tandem Pivot Shaft
1
5
TA-kd
Tandem Assembly
1
14 TAC-07-kd
Thrust Bearing
1
6
R661-kd
Cup
24
15 7001-H028-kd
Frame Cylinder
1
7
R662-kd
Bearing
24
16 B185-kd
Pin Assembly
1
8
R295-035-kd
O-Ring
24
17 C072-kd
Frame Cyl. Pin
2
9
n/a
n/a
18 M000-005ZB-kd
Frame Pin
1
n/a
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
37
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Scissor Ejection Assembly
Item
1
2
3
4
5
6
7
8
9
or
Part #
MG00631A2-kd
EJ10-kd
EJ11 -kd
EJW-12E/14E/16E-kd
TG1A-kd
TG1B-kd
MG00631AZ-kd
PHR-3-kd*
SEA02-kd
SEA03-kd
Description
Qty
Pin
2
Wiper
2
Slides
4
Ejector Wall
1
Track Guide- One Piece 2
Track Guide- Two Piece 2
Pin
2
Roller Assy
6
Scissor Half Inner
1
Scissor Half Outer
1
Item
10
or
11
12
13
14
15
16
17
18
Part #
TG2A-kd**
TG2B-kd
MF-12E/14E/16E-kd
SA-W-kd
MG00600AZ-kd
HW 1-22-kd
MG00160-kd
SB2-kd
6025145-kd
SB1-kd
Description
Qty
Track Guide- One Piece
2
Track Guide- Two Piece
2
Rear Main Frame
1
Bushing
1
Scissor Pin 2"
1
Bolt 1 x 3 1/2"
8
Pin 2"
1
Scissor Cylinder Bushing 1
Ejector Cylinder
1
Scissor Cylinder Bracket
1
*NOTE: ITEM #8 THERE ARE TWO ROLLERS LOCATED ON THE FLOOR OF EJECTION
SYSTEM THAT ARE NOT SHOWN IN DIAGRAM
**NOTE: ITEM #10 MAY BE OMITTED FROM NEW STYLE IMC ES SCRAPERS
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
38
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Scissor Assembly
Item
1
2
3
4
5
Part #
SEA2-kd
SEA3-kd
SAB-kd
SA-W-kd
PHR-3-kd
Description
Outer Scissor
Inner Scissor
Bushing
Washer
Roller Assy
Qty
1
1
2
2
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
39
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Wheel & Tire Assembly
Item
Part #
Description
Qty
1
T-16E-kd
Tire (22.5L x 16.1)
4
2
R-16E-kd
Rim
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
40
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC ES
Wheel Frame Carriage Assembly
Item
1
2
OR
3
4
5
6
Part #
WTHA-kd
TAL-kd
TAR-kd
B185-kd
MFC-12E/14E/16E-kd
EJW-12E/14E/16E-kd
SS1-kd
Description
Hub Assembly
Tandem Assembly Left
Tandem Assembly Right
Pin Assembly
12E/14E/16E Main Frame Carriage
12E/14E/16E Ejector Wall
Scissor Support
Qty
4
2
2
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
41
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
14 ft wide
3
5
3
4
2
6
7
Item
Part #
1
8
Description
Qty
1
1063527-kd
Yoke Ass’y
1
2
1063282-kd
Hitch Ass’y
1
3
1060370-kd
Cylinder, 6” x 15.25”
3
4
EC17.50-kd
Cylinder, 6” x 17.50”
1
OR
EC20.75-kd
Cylinder, 6” x 20.75”
1
5
CSH4-kd
Hub Ass’y
4
6
T2-kd
Wheel Ass’y
4
7
RRB-1-kd
Rear Router Bit
2
8
D895/96-kd
Router Bit, Left/Right
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
42
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Gate Lift Assembly
Item
Part #
Description
Qty
1
GLA-kd*
Gate Lifting Arm
1
2
GLP-kd
Gate Arm Bushing
1
3
1060370-kd
Cylinder
1
4
GP1-kd
Pin-Lift Rod/Gate
3
5
GP2-kd
Pin-Lift Arm/Pivot
1
6
C875-kd
Gate Arm Bracket LH
1
OR
C876-kd
Gate Arm Bracket RH
1
7
GP3-kd
Pin-Gate Guide
1
*GE MODELS CAN HAVE GE-500-kd LIFTING ARM REPLACEMENT ABOVE S/N 0311
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
43
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Bit & Blade Assembly
Item #
1
1A
2
or
3
4
Part #
1024205-kd
R658-kd
D895-kd
D896-kd
RRB1-kd
LBA-18GE-kd
Description
Blade (3/4 x 10 x 168”)
Bolt Assy.
Router Bit, LH
Router Bit, RH
Rear Router Bit
Laser Bracket Assy
Qty
1
17
1
1
2
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
44
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Scissor Ejection Assembly
Item
1
2
3
4
5
6
7
8
9
or
Part #
MG00631B-kd
EJ10-kd
EJ11 -kd
EJW-12E/14E/16E-kd
TG1A-kd
TG1B-kd
MG00631AZ-kd
PHR-3-kd*
SEA02-kd
SEA03-kd
Description
Qty
Pin
2
Wiper
2
Slides
4
Ejector Wall
1
Track Guide- One Piece 2
Track Guide- Two Piece 2
Pin
2
Roller Assy
6
Scissor Half Inner
1
Scissor Half Outer
1
Item
10
or
11
12
13
14
15
16
17
18
Part #
TG2A-kd**
TG2B-kd
MF-12E/14E/16E-kd
SA-W-kd
MG00600AZ-kd
HW 1-22-kd
MG00160-kd
SB2-kd
6025145-kd
SB1-kd
Description
Qty
Track Guide- One Piece
2
Track Guide- Two Piece
2
Rear Main Frame
1
Bushing
1
Scissor Pin 2"
1
Bolt 1 x 3 1/2"
8
Pin 2"
1
Scissor Cylinder Bushing 1
Ejector Cylinder
1
Scissor Cylinder Bracket
1
*NOTE: ITEM #8 THERE ARE TWO ROLLERS LOCATED ON THE FLOOR OF EJECTION
SYSTEM THAT ARE NOT SHOWN IN DIAGRAM
**NOTE: ITEM #10 MAY BE OMITTED FROM NEW STYLE IMC ES SCRAPERS
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
45
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Scissor Assembly
Item
1
2
3
4
5
Part #
SEA2-kd
SEA3-kd
SAB-kd
SA-W-kd
PHR-3-kd
Description
Outer Scissor
Inner Scissor
Bushing
Washer
Roller Assy
Qty
1
1
2
2
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
46
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Rear Frame Assembly
Item
Part #
Description
Qty
1
B185-kd
Pin Assembly
2
2
EJW-GE-kd
Ejector Wall
1
3
SS1-kd
Scissor Support
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
47
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC GE
Rigid Tandem Assembly
ITEM
PART #
DESCRIPTION
QTY
A
1023845-kd
AXLE CLAMP
8
B
P16-kd
PIN
2
C
REF
1” x 7” BOLT
16
D
REF
5/8” x 3.5” BOLT
2
E
1054802-kd
1” SQUARE NUT
16
F
1023812-kd
LEVELING SHIM
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
48
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
General Reference
11
13
ITEM
1
2
3
4
5
6
7
8
PART #
P12-kd
P17-kd
P13-kd
P18-kd
P19-kd
P14-kd
P15-kd
P16-kd
DESCRIPTION
GATE CYL REAR PIN
GATE LIFTING ARM PIVOT PINS
GATE CYL FRONT PIN
WHEEL FRAME & GATE PIVOT PIN
BUCKET PIVOT PIN
DUMP CYL FRONT PIN
DUMP CYL REAR PIN
FRAME CYL PIVOT PINS
9
or
&
10
11
12
OR
13
OR
1022952-kd
1060370-kd
WFC30-kd
DC3.5-kd
CSYH-1-kd
CSH4-kd
CH-kd
T2-kd
T3-kd
GATE AND FRAME CYLINDER, IMC 175
GATE CYLINDER, IMC 225
FRAME CYLINDER, IMC 225
DUMP CYLINDER
YOKE & HITCH ASSEMBLY
HUB ASSEMBLY, 175CS
HUB ASSEMBLY. 225CS
WHEEL, for 20.5” x 25” TIRE, 175CS
WHEEL, for 23.5” x 25” TIRE, 225CS
12
QTY
1
2
1
4
2
2
2
4
3
1
2
1
4
4
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
49
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Gate Lifting Arm Assembly
ITEM
1
2
3
4
5
6
7
8
PART #
GLA-1-kd
P17-kd
P13-kd
PR2.0-kd
PR1.75-kd
REF
REF
REF
DESCRIPTION
GATE LIFT ARM ASS'Y
GATE LIFT ARM PINS
GATE CYL PIN (FRONT)
PIN RETAINER
PIN RETAINER
0.625" x 3.50" gr. 5 BOLT
0.625" LOCK WASHER
0.625" NUT
QTY
1
2
1
2
1
3
3
3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
50
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Gate Assembly
ITEM
1
2
3
4
5
6
7
8
9
10
PART #
GT-10/12-kd
GT-10-2/12-2-kd
GT-10-3/12-3-kd
5912-kd
G13-10/12-kd
G7-kd
G8-kd
P18-kd
REF
REF
DESCRIPTION
GATE ASSEMBLY
UPPER GATE
LOWER GATE
BALL SOCKET, 2" ID
GATE CUTTING EDGE
GATE HINGE BUSHING
GATE HINGE BAR, 1.50" OD
GATE PIVOT PIN
0.625" x 1.25" gr. 5 BOLT
0.625" LOCK WASHER
QTY
1
1
1
1
1
8
1
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
51
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Bowl Assembly
ITEM
1
2
3
4
5
6
7
8
OR
9
10
OR
OR
PART #
BKT-175/225-kd
REF
P14-kd
REF
REF
B21-kd
1063177-kd
CE039-kd
CE049.25-kd
R680-kd
CEC40-kd
CEC40-16-kd
CEC50-16-kd
DESCRIPTION
BUCKET ASSEMBLY
PIN RETAINER BOLT
DUMP CYL PIN (FRONT)
LOCK WASHER
NUT
BUCKET PIVOT BOSS (WELD IN)
BUSHING (PRESS FIT)
BLADE, OUTSIDE 175, 10" WIDE
BLADE, OUTSIDE 225, 10" WIDE
BLADE BOLT ASS'Y
BLADE, CENTER 175, 12" WIDE
BLADE, CENTER 175, 16" WIDE
BLADE, CENTER 225, 16" WIDE
QTY
1
2
2
2
2
2
2
2
2
REF
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
52
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Frame Assembly
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PART #
MF-175/225-kd
REF
REF
REF
P12-kd
P19-kd
P15-kd
P16-kd
PR2.0-kd
PR1.43-kd
PR1.75-kd
REF
REF
REF
F34-kd
F16-kd
H25-kd
DESCRIPTION
MAIN FRAME ASS'Y
BOLT, 1.25 x 7" gr. 8
NUT, 1.25"
LOCK WASHER, 1.250"
GATE CYL. PIN (REAR)
FRAME PIVOT PIN
DUMP CYL. PIN (REAR)
FRAME CYL. PIN (REAR)
PIN RETAINER, 2" ID
PIN RETAINER, 1.43" ID
PIN RETAINER, 1.75" ID
BOLT, 0.625" x 2.5"
LOCK WASHER, 0.625"
NUT, 0.625"
HOSE GUARD MOUNT
HOSE GUARD MOUNT SUPPORT BAR
GATE PIVOT BOSS BUSHING (PRESS FIT)
QTY
1
7
7
7
2
2
2
2
5
2
2
7
7
7
6
6
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
53
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Router Bit Assembly
ITEM
1
&
2
3
PART #
1062894-kd
1062895-kd
REF
RF01031-00120-kd
DESCRIPTION
ROUTER BIT, LH
ROUTER BIT, RH
ROUTER BIT SUPPORT
BOLT ASS'Y
QTY
1
1
2
12
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
54
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
IMC 175CS & 225CS
Wheel Frame Assembly
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PART #
WF10-4/12-4-kd
P16-kd
REF
REF
REF
P18-kd
REF
CS63-kd
1023845-kd
REF
REF
1054802-kd
CS49-kd
DBS-2.0-kd
H25-kd
DESCRIPTION
WHEEL FRAME ASS'Y
FRAME CYL. PIN, FRONT
PIN RETAINTER BOLT
LOCKWASHER
NUT
FRAME PIVOT PIN
PIN KEEPER BOLT
AXLE BRACKET
AXLE BRACKET CAP
LOCKWASHER, 1"
BOLT, 1" X 7" BOLT
SQUARE NUT, 1"
REAR HITCH BRACKET
REAR HITCH BOSS
REAR HITCH BUSHING, PRESS FIT
QTY
1
2
2
4
2
2
2
8
8
16
16
16
2
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
55
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
JOHN DEERE 1512, 1812 & 1814
12’ & 14’ Cutting Width
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
1951381475-kd
1951371523-kd
131372178-kd
131372178-kd
11375829-kd
131372179-kd
131372174-kd
AH163552-kd
131372174-kd
131372180-kd
1951381730-kd
251366029-kd
131372180-kd
11375829-kd
131372180-kd
131372175-kd
241364699-kd
241395873-kd
241365538-kd
241364716-kd
241365534-kd
241397974-kd
1951371750-kd
1951371751-kd
DESCRIPTION
Yoke Assembly
Hitch Assembly
Pin
Pin
Gate Cylinder
Pin
Pin
Dump Cylinder
Pin
Pin
Hub Assembly
Wheel
Pin
Frame Cylinder
Pin
Pin
Blade (13 x 64), center
Blade (16 x 64), center
Blade (13 x 88), center
Blade (10 x 40), end
Blade (13 x 40), end
Blade (16 x 40), end
Router Bit, Left
Router Bit, Right
QTY
1
1
1
1
1
1
1
2
2
2
1
1
2
2
2
2
1
1
1
2
2
2
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
56
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PRIME 12, 14 & 16 yd³
12’ & 14’ Cutting Width
K D Sales offers the following components for Prime Pans currently:
•
•
•
•
•
•
Blades
Seal Kits for cylinders
Hub Repair Kits
Axles
Pins & Bushings
Yoke & Hitch Assemblies
Please call for pricing and availability of these items.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
57
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 4C
6’ Cutting Width
ITEM PART#
1 B185-kd
2 1021815-kd
2 A978-kd
3 B185-kd
4 B439-9-kd
5 1020837-kd
6 R200-3-kd
DESCRIPTION
HITCH PIN (1.5" x 12")
YOKE ASS'Y
YOKE ASS'Y.
HITCH PIN (1.5" X 12")
WEAR PLATE
GREASE FITTING
PIN
5/8"x 1.5" BOLT
5/8" FLAT WASHER
PIN
7 C071-kd
PIN
8 A072-7-kd
CRANK ASS'Y.
9 A987-kd
10 7001-H014-kd GATE CYL.
SPRING ASS'Y,
11 A288-kd
A048-kd
SPRING ONLY
SPRING PLUG ONLY
12 A002-kd
QTY
1
1
1
1
1
REF
1
REF
REF
4
2
1
1
2
2
4
ITEM
13
14
15
16
17
18
19
20
21
22
PART #
7001-H026-kd
R200-3-kd
A511-kd
A511-501-kd
R435-kd
A047-3-kd
B594-kd
R658-kd
N/A
A073-kd
A072-3-kd
DESCRIPTION
BUCKET CYL.
PIN
HUB ASS'Y. (SINGLE)
HUB ASS'Y. (DUAL)
WHEEL
BLADE (8"x 72")
FROST BIT
PLOW BOLT ASS'Y.
CARRIAGE WELDMENT
PIVOT BUSHING
PIN
QTY.
2
REF
REF
REF
4
1
1
REF
1
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
58
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 5C
7’ Cutting Width
ITEM PART#
1 B185-kd
2 1021815-kd
or A978-kd
3 C072-kd
4 B439-9-kd
5 1020837-kd
6 R200-3-kd
DESCRIPTION
HITCH PIN (1.5'x12")
YOKE ASS'Y.
YOKE ASS'Y.
PIN
WEAR PLATE
GREASE FITTING
PIN
5/8"x 1.5" BOLT
5/8" FLAT WASHER
PIN
7 C071-kd
PIN
8 A072-7-kd
CRANK ASS'Y.
9 A987-kd
10 7001-H014-kd GATE CYL.
SPRING ASS'Y,
11 A288-kd
A048-kd
SPRING ONLY
SPRING PLUG ONLY
12 A002-kd
QTY
1
1
1
1
1
REF
1
REF
REF
4
2
1
1
2
2
4
ITEM
13
or
14
15
16
17
18
19
20
21
22
PART #
7001-H013-kd
7001-H026-kd
R200-3-kd
A511-kd
A511-501-kd
R435-kd
A047-5-kd
B594-kd
R658-kd
A073-kd
A072-3-kd
DESCRIPTION
BUCKET CYL.
BUCKET CYL.
PIN
HUB ASS'Y. (SINGLE)
HUB ASS'Y. (DUAL)
WHEEL
BLADE (8" x 84"
FROST BIT
PLOW BOLT ASS'Y.
CARRIAGE WELDMENT
PIVOT BUSHING
PIN
QTY.
2
2
REF
REF
REF
4
1
1
REF
1
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
59
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 5CH
7’ Cutting Width
ITEM
PART#
1 B185-kd
2 A978-kd
3 B581-kd
4 B439-9-kd
5 1020837-kd
6 R200-3-kd
7 C071-kd
RF01031-00100-kd
8 A072-kd
9 A987-kd
10 7001-H014-kd
11 7001-H031-kd
DESCRIPTION
QTY
HITCH PIN (12")
1
YOKE ASS'Y.
1
BOLT ASSEMBLY
1
WEAR WASHER
1
GREASE FITTING
REF
PIN
4
PIN
4
HEX BOLT, 5/8 X 1 1/2
4
PIN ASSEMBLY.
2
CRANK ASSEMBLY
1
GATE CYLINDER
1
CARRIAGE CYLINDER
4
ITEM
12
13
14
15
16
17
18
19
20
21
22
PART #
A775-3-kd
N/A
N/A
A511-kd
R435-kd
A047-5-kd
B594-kd
R658-kd
A992-5-kd
A072-3-kd
A472-kd
DESCRIPTION
PIN
CARRIAGE
PIN ASSEMBLY
HUB ASS'Y. (SINGLE)
WHEEL
BLADE (8" x 84"
FROST BIT
PLOW BOLT ASS'Y.
PIN ASSEMBLY
PIN ASSEMBLY
PLATE
QTY.
2
1
2
2
4
1
1
8
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
60
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 6C
6’ Cutting Width
ITEM
1
2
3
4
5
6
7
8
9
10
11
or
or
12
PART#
B185-kd
A978-kd
B186-kd
B439-9-kd
1020837-kd
C071-501-kd
C071-503-kd
C071-kd
A916-13-kd
7001-H016-kd
A288-kd
A048-kd
A002-kd
BOLT
DESCRIPTION
HITCH PIN (12")
YOKE ASS'Y.
HITCH PIN (13.5")
WEAR PLATE
GREASE FITTING
PIN
PIN
PIN
PIN
GATE CYL.
SPRING ASS'Y,
SPRING ONLY
SPRING PLUG ONLY
BOLT & NUT (.75" x 2.5")
QTY
1
1
1
1
REF
1
2
4
2
1
2
2
4
4
ITEM
13
or
14
or
15
16
17
18
19
20
21
22
23
24
25
PART #
7001-H015-kd
7001-H015A-kd
B025-5-kd
B025-3-kd
A229-501-kd
R435-kd
A047-3-kd
B594-kd
R658-kd
A916-kd
A242-5-kd
A240-kd
R200-3-kd
A798-503-kd
A072-7-kd
DESCRIPTION
BUCKET CYL.
BUCKET CYL.
AXLE CLAMP WELD-ON
AXLE CLAMP
HUB ASS'Y. (DUAL)
WHEEL
BLADE (8" x 72")
FROST BIT
PLOW BOLT ASS'Y.
CARRIAGE WELDMENT
PIN ASS'Y.
BUSHING (WELD-IN(
PIN ASS'Y.
CRANK ASS'Y.
PIN ASS'Y.
QTY.
2
2
REF
REF
2
4
1
1
REF
1
2
2
2
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
61
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 8C
7’ Cutting Width
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
or
14
15
16
17
18
19
or
&
20
or
21
PART#
B185-kd
B575-B-kd
B581-kd
C926-kd
D840-kd
1020387-kd
C832-kd
C071-503-kd
B133-kd
7001-H030-kd
7001-H019A-kd
7001-H020A-kd
7001-H015-kd
7001-H015A-kd
B063-kd
B019-3-kd
B138-kd
B374-kd
C740-kd
C072-kd
B162-kd
B439-10-kd
R619-kd
R619-HD-kd
B439-10-kd
DESCRIPTION
QTY
HITCH PIN (12")
1
YOKE ASS'Y
1
HITCH PIN (15.5")
1
WEAR PLATE
1
HITCH
1
GREASE FITTING
REF
BUSHING (WELD-IN)
2
PIN
4
PIN
4
GATE CYL.
1
FRAME CYL.(4"bore)
1
FRAME CYL.(4"bore)
1
DUMP CYL.
2
DUMP CYL.
2
PIN WELD-IN
2
BUSHING (WELD-IN)
2
PIN (1.75" diam.)
1
PIN (1.43"diam.)
2
PIN (1.43"diam.)
4
PIN (1.75" diam.)
2
PIN (1.75" diam.)
2
WASHER (WELD-ON)
4
WHEEL
4
WHEEL *HEAVY DUTY*
4
WASHER (WELD-ON)
REF
ITEM
22
or
23
or
24
25
26
27
28
29
30
31
32
33
34
35
or
36
37
38
39
40
41
PART #
A916-13-kd
B186-kd
B025-3-kd
B025-5-kd
B137-kd
B372-kd
N/A
R299-kd
RF01022-00241-kd
RF03021-00240-kd
N/A
A047-5-kd
B594-kd
B494-kd
DESCRIPTION
QTY.
PIN (1.5" x 3.5")
2
HITCH PIN (13.5")
1
AXLE CLAMP
8
AXLE CLAMP (WELD-ON)
8
PIN (1.43"diam.)
REF
BUSHING (WELD-IN)
2
BALL SOCKET (1.43"id)
1" x 5.5" BOLT (GR*8)
1" NUT
CARRIAGE WELDMENT
BLADE (8" x 84")
FROST BIT BOLT ASS'Y.
CRANK ASS'Y.
2
REF
REF
1
1
1
1
A229-501-kd
1020402-kd
B596-kd
HUB ASS'Y. (33.25" axle)
HUB ASS'Y. (37.5" axle)
SPILLOVER RACK
2
2
1
D309-kd
D310-kd
R658-kd
R659-kd
WEAR PLATE
WEAR PLATE
BLADE BOLT ASS'Y.
FROST BIT BOLT ASS'Y.
1
1
REF
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
62
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 10C
7’ Cutting Width
ITEM
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
HITCH PIN (12")
1
B186-kd
HITCH PIN (13.5")
1 B185-kd
19
HITCH PIN (15.5")
1
B025-3-kd
AXLE CLAMP
or B581-kd
20
YOKE ASS'Y. BOLT TYPE 1
B025-5-kd
AXLE CLAMP (WELD-ON)
2 B944-B-kd
or
YOKE ASS'Y. BOLT TYPE 1
RF05031-00180-kd LOCK WASHER (1")
or 1061093-kd
21
HITCH PIN (18")
1
RF01022-00241-kd BOLT (1") GR 8
3 B187-kd
22
WEAR PLATE
1
RF03021-00240-kd NUT (1") GR 8
4 C926-kd
23
HITCH (5bolt)
1
N/A
CARRIAGE WELDMENT
5 D650-kd
24
HITCH (7bolt)
1
A047-5-kd
BLADE (8"x 84")
or D650-02-kd
25
GREASE FITTING
REF
A996-3-kd
BLADE (END PCE)
6 1020387-kd
or
BUSHING (WELD-IN)
2
B594-kd
FROST BIT
7 1020295-kd
26
PIN
4
A996-5-kd
BLADE CTR PCE
8 C071-503-kd
or
PIN
4
R658-kd
BLADE BOLT ASS'Y.
9 B133-kd
27
GATE CYL.(1.43"id ends)
1
R659-kd
FROST BIT BOLT ASS'Y.
10 7001-H021-kd
28
GATE CYL.(1.75"id ends)
1
B137-kd
PIN (1.43"diam.)
or 7001-H028-kd
29
B138-kd
PIN (1.75"diam.)
1
or
11 7001-H019A-kd FRAME CYL.(4"bore)
FRAME CYL.(5"bore)
1
B138-kd
PIN (1.75"diam.)
or 7001-H023-kd
30
1
R653-kd
BALL SOCKET (1.75"id)
12 7001-H020A-kd FRAME CYL.(4"bore)
31
FRAME CYL(5"bore)
1
1021144-kd
HUB ASS'Y.
or 7001-H024-kd
32
DUMP CYL.
2
B952-kd
HUB ASS'Y.
13 7001-H015-kd
or
B596-kd
SPILLOVER RACK
2
33
or 7001-H015A-kd DUMP CYL.
PIN WELD-IN
2
1020677-kd
WEAR PLATE
14 B063-kd
34
BUSHING (WELD-IN)
2
1020678-kd
WEAR PLATE
15 B019-3-kd
35
R299-kd
BALL SOCKET (1.43"id)
WASHER WELD-ON)
36
16 B439-10-kd
PIN (WELD-IN
2
B374-kd
PIN
17 B162-kd
37
PIN (BOLT-IN)
2
B372-kd
BUSHING (WELD-IN)
or C072-kd
38
WHEEL
4
18 B080-5B-kd
GRDR WHEEL
4
or 1060601-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
1
8
8
REF
REF
REF
1
1
2
1
1
REF
REF
REF
REF
REF
1
2
2
1
1
1
2
2
2
63
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12C
12’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
6
7
8
9
9A
10
OR
11
OR
12
OR
13
14
15
16
17
OR
18
19
20
&
21
&
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
B185-kd
HITCH PIN (12")
1
& RF05031-00840-kd BOLT, HEX 5/8"-11NC X 3"
B581-kd
HITCH PIN (15.5")
1
& RF01022-00265-kd 1"x 7" BOLT gr*8
B944-B-kd
YOKE ASS'Y. BOLT TYPE
1
22 RF05031-00200-kd LOCK WASHER
RF01022-00241-kd BOLT (1") GR 8
1061093-kd
YOKE ASS'Y. BOLT TYPE
1
RF03021-00240-kd NUT (1") GR 8
B187-kd
HITCH PIN (18")
1
CARRIAGE
C926-kd
WEAR PLATE
1
24 N/A
BLADE (.75" X 8" X 144")
D650-kd
HITCH (5bolt)
1
25 D832-kd
D650-02-kd
HITCH (7bolt)
1
FROST BIT (52")
26 1020346-kd
BLADE BOLT ASS'Y.
1020387-kd
GREASE FITTING
5
27 R658-kd
FROST BIT BOLT ASS'Y.
1020526-kd
TONGUE
1
28 R659-kd
CRANK ASS'Y.
C071-503-kd
PIN
4
29 N/A
PIN (1.75"diam.)
B133-kd
PIN
2
30 C631-kd
BALL SOCKET (1.75"id)
C740-kd
PIN
2
31 R653-kd
HUB ASS'Y. (2.25" AXLE)
1020722-kd
GATE CYL. (2" SHAFT)
1
32 1021144-kd
1022952-kd
GATE CYL. (2.5" SHAFT)
1
HUB ASS'Y (2.50" AXLE)
or B952-kd
SINGLE HUB ASS'Y
7001-H024-kd FRAME CYL. (5" bore) LH
1
or B951-kd
1043343-kd
HUB ASS'Y
1022979-kd
FRAME CYL. (6" bore) LH
1
or
S.S. WHEEL
7001-H023-kd FRAME CYL. (5" bore) RH
1
33 1024516-kd
GRADER WHEEL
1022953-kd
FRAME CYL (6" bore) RH
1
or 1060601-kd
WHEEL (10 X 28)
7001-H015A-kd DUMP CYL.
2
or B080-5B-kd
B063-kd
PIN WELD-IN
2
WEAR PLATE (LH)
34 1020677-kd
WEAR PLATE (LH)
B019-3-kd
BUSHING (WELD-IN)
2
or 1062894-kd
WEAR PLATE (RH)
B162-5-kd
WASHER WELD-ON)
4
35 1020678-kd
WEAR PLATE (RH)
B162-kd
PIN (WELD-IN)
2
or 1062895-kd
BALL SOCKET (1.43"id)
C072-kd
PIN (BOLT-IN)
2
36 R299-kd
PIN
1020295-kd
BUSHING (WELD-IN)
2
37 C815-kd
GATE BRACKET LH
B186-kd
HITCH PIN (1.5" X 14")
1
38 C875-kd
B025-5-kd
AXLE PLATE (WELD-ON)
8
GATE BRACKET RH
& C876-kd
PIN (1.75" diam.)
B025-3-kd
AXLE CLAMP
8
39 B138-kd
SPILLOVER RACK
1023845-kd
AXLE CLAMP
REF
40 D325-kd
1023812-kd
SHIM
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
REF
REF
5\7
5\7
5\7
1
1
15
10
2
1
2
2
REF
2
4
4\6
4\6
1
1
1
1
2
2
1
1
1
1
64
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12C10
10’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
&
&
&
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
B187-kd
C926-kd
D650-kd
D650-02-kd
1020387-kd
1020295-kd
C071-504-kd
C740-kd
7001-H028-kd
1022953/979-kd
1022953/979-kd
7001-H017A-kd
B063-kd
B019-3-kd
B439-10-kd
C072-kd
1060926-kd
B581-kd
1023845-kd
1023812-kd
1054802-kd
RF01022-00265-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y.
YOKE ASS'Y.
HITCH PIN (18")
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
GREASE FITTING
BUSHING (WELD-IN)
PIN (1" diam.)
PIN (1.43" diam.)
GATE CYL.(2"shaft)
FRAME CYL.(6"bore)
FRAME CYL(6"bore)
DUMP CYL.
PIN WELD-IN
BUSHING (WELD-IN)
WASHER WELD-ON)
PIN (1.75" diam.)
WHEEL (multi piece)
HITCH PIN (15.5" )
AXLE CLAMP
SHIM PLATE
SQUARE NUT
1" x 7" BOLT gr*8
QTY
1
1
1
1
1
1
1
1
REF
2
4
4
1
1
1
2
2
2
REF
2
4
1
REF
REF
REF
REF
ITEM
PART #
DESCRIPTION
21 RF05031-00180-kd 1" LOCK WASHER
22 RF01022-00241-kd 1" x 5.5" BOLT gr*8
23 RF03021-00240-kd 1" LOCK NUT
CARRIAGE WELDMENT
24 N/A
BLADE (ctr.)(10 x 47.75")
25 1062421-kd
BLADE (ctr.)(12 x 47.75")
or 1062423-kd
BLADE (end)(10" x 37.75")
26 1062422-kd
FOR AGGRESSIVE CENTER USE PN# 1062423-kd
BLADE BOLT ASS'Y.
27 R680-kd
28 N/A
FACTORY ORDER
29 CRANK ASS'Y
B138-kd
PIN
(1.75"diam.)
30
BALL SOCKET (1.75"id)
31 R653-kd
HUB ASS'Y
32 1061110-kd
33 SPILLOVER RACK FACTORY ORDER
WEAR PLATE (LH)
34 1020677-kd
WEAR PLATE (LH)
or 1062894-kd
WEAR PLATE (RH)
35 1020678-kd
WEAR PLATE (RH)
or 1062895-kd
BALL SOCKET (1.43"id)
36 R299-kd
BALL SOCKET (1.75"id)
or R653-kd
PIN (1.43" diam.)
37 B374-kd
PIN (1.75" diam.)
or B374-2-kd
BUSHING (1.43" id)
38 B372-kd
BUSHING (1.75" id)
or B372-1-kd
QTY
REF
REF
REF
1
1
Opt.
2
REF
1
4
1
4
1
1
1
1
1
2
2
2
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
65
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12CFB
12’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
7
8
9
10
or
11
or
12
or
13
14
or
17
18
or
or
19
20
&
20A
&
&
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
B185-kd
HITCH PIN (12")
1
& RF01022-00265-kd 1" x 7" BOLT gr*8
B581-kd
HITCH PIN (15.5")
1
21 RF05031-00180-kd 1" LOCK WASHER
B944-B-kd
YOKE ASS'Y. BOLT TYPE
1
21 RF01022-00241-kd 1" x 5.5" gr*8 BOLT
1061093-kd
YOKE ASS'Y. BOLT TYPE
1
21 RF03021-00240-kd NUT (1") GR 8
B187-kd
HITCH PIN (18")
1
BLADE HINGE
22 D556-kd
C926-kd
WEAR PLATE
1
GATE ASS'Y.
23 D570-kd
D650-kd
HITCH (5bolt)
1
CARRIAGE WELDMENT
24 N/A
D650-02-kd
HITCH (7bolt)
1
BLADE (10" x 143")
25 1020743-kd
1020387-kd
GREASE FITTING
REF
BLADE BOLT ASS'Y.
27 R658-kd
D549-kd
LEVELING CAM
1
28 RF02131-00160-kd SET SCREW
C071-503-kd PIN
4
& RF03021-00268-kd SET SCREW NUT
C740-kd
PIN
4
CRANK ASS'Y.
29 C651-kd
1020722-kd
GATE CYL. (2" shaft)
1
PIN (1.75"diam.)
30 B138-kd
1022952-kd
GATE CYL. (2.5" shaft)
1
BALL SOCKET (1.75"id)
31 R653-kd
7001-H023-kd FRAME CYL (5" bore)
1
HUB ASS'Y (SINGLE)
32 B951-kd
1022953-kd
FRAME CYL.(6"bore)
1
HUB ASS'Y (DUAL)
or B952-kd
7001-H024-kd FRAME CYL.(5"bore)
1
HUB ASS'Y (DUAL)
or 1021144-kd
1022979-kd
FRAME CYL(6"bore)
1
HUB ASS'Y (DUAL)
or 1043343-kd
1020740-kd
DUMP CYL.
2
SPILLOVER RACK
33 D591-kd
1020526-kd
TONGUE
1
WEAR PLATE
34 D895-kd
D380-kd
REPLACED BY 1020526
1
WEAR PLATE
& D896-kd
B138-kd
PIN (1.75" diam.)
2
WEAR PLATE
35 D891-kd
B080-5B-kd
WHEEL
4/6
WEAR PLATE
& D892-kd
1024516-kd
WHEEL
4
BALL SOCKET (1.43"id)
36 R299-kd
1060601-kd
GRADER WHEEL
4/6
PIN (1.43" diam.)
37 C815-kd
1020295-kd
BUSHING (WELD-ON)
2
GATE BRACKET (LT)
38 C875-kd
B025-3-kd
AXLE CLAMP
REF
GATE BRACKET (RT)
& C876-kd
B025-5-kd
AXLE PLATE (WELD-ON) REF
SEQUENCE VALVE
39 R763-kd
1023845-kd
AXLE CLAMP
REF
40 SPILL OVER RACK
1023812-kd
AXLE CLAMP SHIM
REF
PIN (1.75"diam.)
41 C631-kd
1054802-kd
SQUARE NUT
REF
GIMBAL SOCKET
42 C786-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
REF
REF
REF
REF
1
1
1
1
REF
1
1
REF
4
1
REF
REF
REF
REF
1
1
1
1
1
2
2
1
1
1
REF
4
66
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12P
10’ Cutting Width
ITEM
1
2
3
4
5
6
7
8
9
10
&
11
12
13
or
PART#
B185-kd
B575-B-kd
B581-kd
C926-kd
D840-kd
1020387-kd
RF01022-00241-kd
RF05031-00180-kd
RF03021-00240-kd
D309-kd
D310-kd
C112-kd
R658-kd
7001-H015-kd
7001-H015A-kd
DESCRIPTION
HITCH PIN (12")
YOKE ASS'Y. BOLT TYPE
HITCH PIN (15.5")
WEAR PLATE
HITCH
GREASE FITTING
1"x5.5" BOLT gr*8
1" LOCK WASHER
1" NUT
WEAR PLATE
WEAR PLATE
BLADE (8"x120")
BLADE BOLT ASS'Y
DUMP CYL.
DUMP CYL.
QTY
1
1
1
1
1
REF
REF
REF
REF
1
1
1
REF
2
2
ITEM
14
15
15A
16
17
18
19
20
21
&
22
23
or
PART #
C071-503-kd
B063-kd
B439-10-kd
B019-3-kd
B133-kd
7001-H019A-kd
7001-H020A-kd
C740-kd
B025-3-kd
B025-5-kd
1020402-kd
R619-kd
R619HD-kd
DESCRIPTION
PIN (1" diam.)
PIN (1.75" diam.)
SPACER (WELD-ON)
BUSHING (WELD-IN)
PIN (1.43"diam.)
FRAME CYLINDER
FRAME CYLINDER
PIN (1.43"diam.)
AXLE CLAMP
AXLE CLAMP
PLATE(WELD-ON)
HUB ASS'Y. (DUAL)
WHEEL
WHEEL HEAVY DUTY
QTY.
4
1
4
2
2
1
1
2
REF
REF
2
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
67
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12.5E
12’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
6
7
8
9
10
11
12
&
13
or
14
OR
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
B187-kd
C926-kd
D650-kd
D650-02-kd
1020837-kd
1023257-kd
B133-kd
C071-503-kd
1023489-kd
B439-8-kd
D895-kd
D896-kd
1023867-kd
1023867-01-kd
1023868-kd
1023868-01-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y. BOLT TYPE
YOKE ASS'Y. BOLT TYPE
HITCH PIN (18")
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
GREASE FITTING
GATE CYL.
PIN (1.43" diam.)
PIN (1" diam.)
PIN (GREASABLE)
BUSHING
WEAR PLATE
WEAR PLATE
EJECTOR CYL.(3"bore)
EJECTOR CYL.(3.5"bore)
EJECTOR CYL. (3"bore)
EJECTOR CYL.(3.5"bore)
QTY
1
1
1
1
1
1
1
1
REF
1
REF
4
2
REF
1
1
1
1
1
1
ITEM
15
16
17
or
18
19
&
&
&
&
20
21
22
or
23
24
25
26
27
28
PART #
1025448-kd
1022421-kd
1022327-kd
1029001-kd
1024516-kd
1023845-kd
1023812-kd
1054802-kd
RF01022-00265-kd
RF05031-00180-kd
1023846-kd
C072-kd
1025501-kd
1041984-kd
1029279-kd
1029606-kd
1029065-kd
1029273-kd
1029604-kd
1025516-kd
DESCRIPTION
QTY.
FRAME CYL.
2
SHOE WELDMENT
2
BLADE (10" X 144")(1 PCE.)
1
BLADE (8" X 72")
2
WHEEL
4
AXLE CLAMP
REF
SHIM PLATE
REF
SQUARE NUT
REF
1" x 7" BOLT
REF
1" LOCK WASHER
REF
HUB ASS'Y
4
PIN (1.75" diam.)
2
SKID PAD CYLINDER
2
SKID PAD CYLINDER
2
SKID PAD WELDMENT
REF
SKID PAD PLATE
REF
SLEEVE WELDMENT (TEE) REF
LINK WELDMENT
REF
PIN WELDMENT (1"x 9")
REF
PIN WELDMENT (1" x 18")
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
68
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10,12.5E,14E10.5,15.5E14,
17E10.5 & 20E16 EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
1023765-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
69
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10 & 14E10.5
10’ & 10.5’ Cutting Width
ITEM
1
or
2
3
4
or
5
6
7
8
or
9
or
or
or
or
10
11
or
or
12
PART#
1061093-kd
1063285-kd
D650-kd
1021482-kd
1061128-kd
1060758-kd
1062040-kd
1030789-kd
N/A
1061965-kd
1029455-kd
1060978-kd
1060987-kd
1060689-kd
1062010-kd
1060678-kd
4J8665R-kd
1061986-kd
1062006-kd
1060692-kd
1023765-kd
DESCRIPTION
QTY
Yoke and Hitch Assy (12E10)
1
Yoke and Hitch Assy (14E10.5)
1
Adj. Hitch Assembly
1
Hyd. Hose Support
1
12E10 Hyd. Hose System
1
14E10.5 Hyd. Hose System
1
Lift Arm
1
Gate Cylinder
1
Aluminum Plates
1
Gate Link/Bushing (s/n: 29819+)
1
Gate Link/Bushing (s/n: below 29819) 1
12E10 Bowl Weldment
1
12E10 Tongue Weldment
1
14E10.5 Bowl Weldment
1
14E10.5 Tongue (s/n: 29819+)
1
14E10.5 Tongue (s/n: below 29819)
1
Router Bit (Wear Plate)
2
12E10 Gate Weldment
1
14E10.5 Gate (s/n: 29819+)
1
14E10.5 Gate (s/n: below 29819)
1
Rail Weldment, Ejector Roller
8
ITEM
13
or
14
or
or
15
or
or
or
or
16
17
or
or
or
18
19
20
or
or
21
or
PART #
1023867-kd
1023868-kd
1061020-kd
1061021-kd
1063133-kd
1062018-kd
1062002-kd
1060686-kd
1062009-kd
1060671-kd
N/A
1021904-kd
1061062-kd
1060839-kd
1060713-kd
B581-kd
1060760-kd
1061110-kd
B951-kd
B952-kd
1060926-kd
1060601-kd
DESCRIPTION
QTY.
Ejector Cylinder (LH)
1
Ejector Cylinder (RH)
1
Cutting Blade Side/Center
2
12E10 Cutting Blade
1
14E10.5 Cutting Blade
1
12E10 Ejector Weldment
1
14E10.5 Ejector Weldment
1
14E10.5 Ejector Weldment
1
Adjustable Headache Rack
1
Weld-on Headache Rack
Ref.
Decals
Ref.
Cyl. Head Wrench
Ref.
12E10 Carriage Assy
1
14E10.5 Carriage
1
14E10.5 Carriage (s/n: 29819+)
1
Bold Assy Kit for Rear Hitch
1
Carriage Cyl. Assy
2
Hub Assy (s/n: 29819+)
4
Hub Assy (s/n: 25095-28618)
2
Hub Assy (s/n: 25095-28618)
2
Wheel Assy (s/n: 29819+)
4
Wheel Assy (s/n: 25095-28618)
6
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
70
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10,12.5E,14E10.5,15.5E14,
17E10.5 & 20E16 EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
1023765-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
71
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 14C
10’ Cutting Width
ITEM
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
HITCH PIN (12")
1
SQUARE NUT
1 B185-kd
& 1054802-kd
HITCH PIN (15.5")
1
or B581-kd
& RF01022-00265-kd 1" x 7" BOLT grade 8
AXLE CLAMP (WELD-ON)
YOKE ASS'Y. BOLT TYPE
1
or B025-5-kd
2 B944-B-kd
YOKE ASS'Y. BOLT TYPE
1
& B025-3-kd
AXLE CLAMP
or 1061093-kd
HITCH PIN (18")
1
3 B187-kd
21 RF05031-00180-kd 1" LOCK WASHER
WEAR PLATE
1
22 RF01022-00241-kd 1" x 5.5" grade 8 BOLT
4 C926-kd
HITCH (5bolt)
1
23 RF03021-00240-kd NUT (1") GR 8
5 D650-kd
HITCH (7bolt)
1
CARRIAGE WELDMENT
or D650-02-kd
24 N/A
BLADE (8" x 120")
1020387-kd
GREASE FITTING
REF
25 C112-kd
BLADE (10" x 120")
BUSHING (WELD-ON)
2
or 1062691-kd
7 1020295-kd
FROST BIT
PIN (1" diam.)
4
26 B947-kd
8 C071-503-kd
BLADE BOLT ASS'Y.
PIN (1.43" diam.)
4
27 R658-kd
9 B133-kd
FROST BIT BOLT ASS'Y.
1
28 R659-kd
10 7001-H028-kd GATE CYL. (2" shaft)
1
CRANK ASS'Y.
11 7001-H023-kd FRAME CYL (5" bore)
29 B293-kd
PIN (1.75"diam.)
1
30 B138-kd
or 1022953/979-kd FRAME CYL.(6"bore)
BALL SOCKET (1.75"id)
1
31 R653-kd
12 7001-H024-kd FRAME CYL.(5"bore)
HUB ASS'Y(SINGLE)
1
32 B951-kd
or 1022953/979-kd FRAME CYL(6"bore)
2
HUB ASS'Y. (DUAL)
13 7001-H017A-kd DUMP CYL.
or B952-kd
HUB ASS'Y (DUAL)
PIN (WELD-ON)
2
or 1021144-kd
14 B063-kd
1061110-kd
HUB ASS'Y (SINGLE)
B019-3-kd
BUSHING
(WELD-ON)
2
or
15
B439-10-kd
WASHER
(WELD-ON)
REF
B596-kd
SPILLOVER
RACK
16
33
B162-kd
PIN
(1.75"diam.)(WELD-IN)
2
1020677-kd
WEAR
PLATE
(LH)
17
34
WEAR PLATE (LH)
PIN (1.75"diam.)(BOLT-IN)
4/6
or 1062894-kd
or C072-kd
WEAR PLATE (RH)
WHEEL
4/6
35 1020678-kd
18 B080-5B-kd
WEAR PLATE (RH)
GRADER WHEEL
4/6
or 1062895-kd
or 1060601-kd
WHEEL
4
BALL SOCKET (1.43"id)
or 1024516-kd
36 R299-kd
BALL SOCKET (1.75"id)
WHEEL
4
& R653-kd
or 1060926-kd
PIN (1.43" diam.)
HITCH PIN (1.5" X 13.5")
1
37 B374-kd
19 B186-kd
PIN (1.75"diam.)
HITCH PIN (1.5" X 15.5")
1
or B374-2-kd
or B581-kd
BUSHING WELD-IN (1.43"id)
AXLE CLAMP
REF
38 B372-kd
20 1023845-kd
BUSHING WELD-IN (1.75"id.)
AXLE CLAMP SHIM
REF
& 1023812-kd
OR B372-1-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
REF
REF
REF
REF
REF
REF
REF
1
1
1
OPT
REF
REF
REF
4
1
4/6
4
4
4
1
1
1
1
1
2
2
2
2
2
2
72
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 14CS
10’ Cutting Width
ITEM
1
or
2
or
or
3
or
4
5
or
or
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
&
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
1063527-kd
B187-kd
1063214-kd
C926-kd
D650-kd
D650-02-kd
1063282-kd
1020387-kd
1020295-kd
C071-504-kd
C740-kd
7001-H028-kd
1022953-979-kd
102295-979-kd
7001-H017A-kd
B063-kd
B019-3-kd
B439-10-kd
C072-kd
1060926-kd
B581-kd
1023845-kd
1023812-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y. BOLT TYPE
YOKE ASS'Y. BOLT TYPE
YOKE ASS'Y. BOLT TYPE
HITCH PIN (18")
HITCH PIN (2" DIA)
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
HITCH (2")
GREASE FITTING
BUSHING (WELD-IN)
PIN (1" diam.)
PIN (1.43" diam.)
GATE CYL.(2"shaft)
FRAME CYL.(6"bore)
FRAME CYL(6"bore)
DUMP CYL.
PIN WELD-IN
BUSHING (WELD-IN)
WASHER WELD-ON)
PIN (1.75" diam.)
WHEEL (multi piece)
HITCH PIN (15.5" )
AXLE CLAMP
SHIM PLATE
QTY
1
1
1
1
1
1
1
1
1
1
1
REF
2
4
4
1
1
1
2
2
2
REF
2
4
1
REF
REF
ITEM
PART #
DESCRIPTION
QTY.
1054802-kd
SQUARE NUT
REF
&
RF01022-00265-kd 1" x 7" BOLT gr*8
REF
&
RF05031-00180-kd 1" LOCK WASHER
REF
21
RF01022-00241-kd 1" x 5.5" BOLT gr*8
REF
22
RF03021-00240-kd 1" LOCK NUT
REF
23
N/A
CARRIAGE WELDMENT
1
24
1062421-kd
BLADE (ctr.)(10x 47.75")
1
25
1062422-kd
BLADE (end)(10" x 37.75")
2
or
1062423-kd
BLADE (ctr.)(12x 47.75")
option
26
FOR AGGRESSIVE CENTER USE PN# 1062423-kd
R680-kd
BLADE BOLT ASS'Y.
REF
27
BLADE
SERRATED BLADE N/A
28
CRANK ASS'Y
FACTORY ORDER
1
29
B138-kd
PIN
(1.75"diam.)
4
30
R653-kd
BALL SOCKET (1.75"id)
1
31
1061110-kd
HUB ASS'Y
4
32
SPILLOVER RACK FACTORY ORDER
1
33
1020677-kd
WEAR PLATE (LH)
1
34
1062894-kd
WEAR PLATE (LH)
1
or
1020678-kd
WEAR PLATE (RH)
1
35
1062895-kd
WEAR PLATE (RH)
1
or
R299-kd
BALL SOCKET (1.43"id)
2
36
R653-kd
BALL SOCKET (1.75"id)
2
or
B374-kd
PIN (1.43" diam.)
2
37
B374-2-kd
PIN (1.75" diam.)
2
or
B372-kd
BUSHING (1.43" id)
2
38
B372-1-kd
BUSHING (1.75" id)
2
or
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
73
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 15C
14’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
6
7
8
9
9A
10
or
11
or
12
or
13
14
15
16
17
or
18
19
20
or
21
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
B185-kd
HITCH PIN (12")
1
AXLE CLAMP SHIM
or 1023812-kd
B581-kd
HITCH PIN (15.5")
1
22 RF05031-00200-kd LOCK WASER
B944-B-kd
YOKE ASS'Y
1
& RF01022-00241-kd BOLT (1") GR 8
1061093-kd
YOKE ASS'Y
1
& RF03021-00240-kd NUT (1") GR 8
B187-kd
HITCH PIN (18")
1
23 RF02131-00160-kd SET SCREW
C926-kd
WEAR PLATE
1
CARRIAGE WELDMENT
24 N/A
D650-kd
HITCH (5bolt)
1
BLADE (10" x 168")
25 1024205-kd
D650-02-kd
HITCH (7bolt)
1
FROST BIT
26 1024550-kd
1020387-kd
GREASE FITTING
REF
BLADE BOLT ASS'Y.
27 R658-kd
1020526-kd
TOUNGUE
2
FROST BIT BOLT ASS'Y.
28 R659-kd
C071-503-kd
PIN
4
CRANK ASS'Y.
29 NA
B133-kd
PIN
4
PIN (1.75"diam.)
30 C631-kd
C740-kd
PIN
2
BALL SOCKET (1.75"id)
31 R653-kd
1022722-kd
GATE CYL.(2"shaft)
1
HUB ASS'Y.
32 1021144-kd
1022952-kd
GATE CYL.(2.5" shaft)
1
HUB ASS'Y (SINGLE)
or B951-kd
7001-H024-kd FRAME CYL.(5"bore)
1
HUB ASS'Y.
or B952-kd
1022953/979-kd FRAME CYL.(6"bore)
1
HUB ASS'Y.(super single)
32 1043343-kd
7001-H023-kd FRAME CYL.(5"bore)
1
WHEEL (SUPER SINGLE)
or 1024516-kd
1022953/979-kd FRAME CYL(6"bore)
1
GRADER WHEEL
or 1060601-kd
7001-H017A-kd DUMP CYL.
2
WHEEL (SUPER SINGLE)
or B080-5B-kd
B063-kd
PIN WELD-IN
2
WEAR PLATE (LH)
34 1020677-kd
B019-3-kd
BUSHING (WELD-IN)
2
WEAR PLATE (LH)
or 1062894-kd
B439-10-kd
WASHER WELD-ON)
REF
WEAR PLATE (RH)
35 1020678-kd
B162-kd
PIN (WELD-IN
2
WEAR PLATE (RH)
or 1062895-kd
C072-kd
PIN (BOLT-IN)
2
BALL SOCKET (1.43"id)
36 R299-kd
1020295-kd
BUSHING (WELD-IN)
4
PIN
37 C815-kd
B186-kd
HITCH PIN (13.5")
1
GATE BRACKET (LH)
38 C875-kd
B025-3-kd
AXLE CLAMP
REF
GATE BRACKET (RH)
38 C876-kd
B025-5-kd
AXLE CLAMP (WELD-ON) REF
PIN (1.75"diam.)
39 B138-kd
1023845-kd
AXLE CLAMP
REF
SPILLOVER RACK
40 D325-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
REF
REF
REF
REF
REF
1
1
1
REF
REF
REF
REF
1
2
REF
2
2
4
4/6
4/6
1
1
1
1
2
2
1
1
1
1
74
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 15CFB
14’ Cutting Width
ITEM
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
QTY.
HITCH PIN (12")
1
REF
1 B185-kd
& RF01022-00265-kd 1" x 7" BOLT gr*8
HITCH PIN (15.5")
1
REF
or B581-kd
21 RF05031-00180-kd 1" LOCK WASHER
YOKE ASS'Y. BOLT TYPE 1
REF
2 B944-B-kd
& RF01022-00241-kd 1" x 5.5" gr*8 BOLT
YOKE ASS'Y. BOLT TYPE 1
REF
or 1061093-kd
& RF03021-00240-kd NUT (1") GR 8
HITCH PIN (18")
1
BLADE HINGE
1
3 B187-kd
22 D353-kd
WEAR PLATE
1
GATE ASS'Y.
4 C926-kd
23 D330-kd
HITCH (5bolt)
1
CARRIAGE WELDMENT
1
5 D650-kd
24 N/A
HITCH (7bolt)
1
BLADE (10" x 168")
1
or D650-02-kd
25 1020742-kd
GREASE FITTING
REF
BLADE BOLT ASS'Y.
REF
6 1020387-kd
27 R658-kd
LEVELING CAM
1
1
7 C769-kd
28 RF02131-00160-kd SET SCREW
PIN
4
1
8 C071-503-kd
& RF03021-00268-kd SET SCREW NUT
PIN
4
CRANK ASS'Y.
REF
9 C740-kd
29 C651-kd
GATE CYL. (2" shaft)
1
PIN (1.75"diam.)
4
10 1020722-kd
30 B138-kd
GATE CYL. (2.5" shaft)
1
BALL SOCKET (1.75"id)
1
or 1022952-kd
31 R653-kd
FRAME CYL (5" bore)
1
HUB ASS'Y (SINGLE)
REF
11 7001-H023-kd
32 B951-kd
1
HUB ASS'Y (DUAL)
REF
or 1022953/979-kd FRAME CYL.(6"bore)
or B952-kd
FRAME CYL.(5"bore)
1
HUB ASS'Y (DUAL)
REF
12 7001-H024-kd
or 1021144-kd
1
HUB ASS'Y (DUAL)
REF
or 1022953/979-kd FRAME CYL(6"bore)
or 1043343-kd
DUMP CYL.
2
SPILLOVER RACK
1
13 1020740-kd
33 D591-kd
TONGUE
1
WEAR PLATE
1
14 1020526-kd
34 D895-kd
REPLACED BY 1020526
1
WEAR PLATE
1
or D380-kd
& D896-kd
PIN (1.75" diam.)
2
WEAR PLATE
1
17 B138-kd
35 D891-kd
WHEEL
4/6
WEAR PLATE
1
18 B080-5B-kd
& D892-kd
WHEEL
4
BALL SOCKET (1.43"id)
2
or 1024516-kd
36 R299-kd
GRADER WHEEL
4/6
PIN (1.43" diam.)
2
or 1060601-kd
37 C815-kd
BUSHING (WELD-ON)
2
GATE BRACKET (LH)
1
19 1020295-kd
38 C875-kd
AXLE CLAMP
REF
GATE BRACKET (RH)
1
20 B025-3-kd
or C876-kd
AXLE PLATE (WELD-ON) REF
SEQUENCE VALVE
1
& B025-5-kd
39 R763-kd
AXLE CLAMP
REF
SPILLOVER RACK
1
20A 1023845-kd
40 D325-kd
AXLE CLAMP SHIM
REF
PIN (1.75"diam.)
REF
& 1023812-kd
41 C631-kd
GIMBAL SOCKET
4
SQUARE NUT
REF
& 1054802-kd
42 C786-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
75
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 15.5E14
14’ Cutting Width
ITEM
PART#
1 B185-kd
or B581-kd
2 B944-B-kd
or 1061093-kd
3 B187-kd
4 C926-kd
5 D650-kd
or D650-02-kd
6 1020387-kd
7 1023257-kd
8 B133-kd
9 C071-503-kd
10 1023489-kd
11 B439-8-kd
12 D895-kd
& D896-kd
13 1023867-kd
or 1023867-01-kd
14 1023868-kd
OR 1023868-01-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y.
YOKE ASS'Y.
HITCH PIN (18")
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
GREASE FITTING
GATE CYL.
PIN (1.43" diam.)
PIN (1" diam.)
PIN (GREASABLE)
BUSHING
WEAR PLATE
WEAR PLATE
EJECTOR CYL.(3.5"bore)
EJECTOR CYL.(4" bore)
EJECTOR CYL. (3.5"bore)
EJECTOR CYL.(4" bore)
QTY
1
1
1
1
1
1
1
1
REF
1
REF
4
2
REF
1
1
1
1
1
1
ITEM
15
16
17
or
18
19
&
&
&
&
20
21
22
or
23
24
25
26
27
28
PART #
1025448-kd
1022421-kd
1022472-kd
1028786-kd
1024516-kd
1023845-kd
1023812-kd
1054802-kd
RF01022-00265-kd
RF05031-00180-kd
1023846-kd
C072-kd
1025501-kd
1041984-kd
1029279-kd
1029606-kd
1029065-kd
1029273-kd
1029604-kd
1025516-kd
DESCRIPTION
FRAME CYL.
SHOE WELDMENT
BLADE (10" X 84")
BLADE (8" x 84')
WHEEL
AXLE CLAMP
SHIM PLATE
SQUARE NUT
1" x 7" BOLT
1" LOCK WASHER
HUB ASS'Y
PIN (1.75" diam.)
SKID PAD CYLINDER
SKID PAD CYLINDER
SKID PAD WELDMENT
SKID PAD PLATE
SLEEVE WELDMENT )
LINK WELDMENT
PIN WELDMENT (1"x 9")
PIN WELDMENT (1" x 18")
QTY.
2
2
2
2
4
REF
REF
REF
REF
REF
4
2
2
2
REF
REF
REF
REF
REF
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
76
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10,12.5E,14E10.5,15.5E14,
17E10.5 & 20E16 EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
1023765-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
77
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 16CS10
10’ Cutting Width
16
15 23 24 25
21 20 19
4
2
1
12
22
19
3
7
13
18
11
8,9,10
17
34
31,32,33
ITEM
PART#
1 B185-kd
2 1061093-kd
3 B187-kd
4 1021482-kd
5 RF02022-00440-kd
6 RF03021-00081-kd
7 RF05031-00090-kd
8 RF01022-00241-kd
9 RF03021-00240-kd
10 RF05031-00180-kd
11 D650-kd
12 C926-kd
13 1062022-kd
14
15
16
17
N/A
1062521-kd
1062009-kd
1062800-kd
DESCRIPTION
Bolt Assembly
Yoke/Hitch Assembly
Bolt Assembly Front
Hose Bracket Front
Bolt, Hex .50" x 1.25"
Nut, Hex .50" NC GR5
Washer, Lock .50" Med
Bolt 1" NC x 5.50" GR8
Nut, Hex NC GR8
Washer, Lock 1"
Hitch Assembly
Plate, Wear
Hydraulic Line Group
Yard Unit
Headache Rack
Carriage Group
30
QTY
1
1
1
1
2
2
2
7
7
7
1
1
Ref.
1
1
1
29
ITEM
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
28
26,27
PART #
B138-kd
B293-kd
7001-H028-kd
C072-1-kd
1062522-kd
7001-H017A-kd
C071-504-kd
1022953/979-kd
1022953/979-kd
C740-kd
1063672-kd
B374-kd
B374-1-kd
1062423-kd
1062421-kd
1062422-kd
1062894/5-kd
DESCRIPTION
Pin Weldment 1.75" x 7.63"
Crank Weldment
Gate Cylinder
Pin Weldment 1.75" x 5.88"
Final Weldment
Bucket Cylinder
Pin Weldment 1 x 4.25"
Frame Cylinder Assembly
Frame Cylinder Assembly
Pin Weldment 1.44" x 4.38"
Pin Weldment 1.75 x 9.37"
Pin Assembly
Pin Weldment
Blade Center (12 x 47.75")
Blade Center (10 x 47.75")
Blade End (10" x 35.75")
Wear Plate Weldment L/R
QTY.
1
3
1
1
1
2
2
1
1
2
2
1
1
1
Ref.
2
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
78
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 17C
12’ Cutting Width
ITEM
1
or
2
or
or
3
or
4
5
or
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
&
&
&
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
1063527-kd
B187-kd
1063214-kd
C926-kd
D650-kd
D650-02-kd
1020387-kd
1020526-kd
C071-504-kd
C740-kd
1060370-kd
1022953/979-kd
1022953/979-kd
7001-H017A-kd
B063-kd
B019-3-kd
B439-10-kd
C072-kd
1020295-kd
B581-kd
1023845-kd
1054802-kd
RF05031-00180-kd
RF01022-00265-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y(1.5”)
YOKE ASS'Y(1.5”)
YOKE ASS'Y(2”)
HITCH PIN (18")
HITCH PIN (2")
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
GREASE FITTING
TONGUE
PIN
PIN
GATE CYL.
FRAME CYL.(6"bore)
FRAME CYL(6"bore)
DUMP CYL.
PIN WELD-IN
BUSHING (WELD-IN)
WASHER WELD-ON)
PIN (1.75" diam.)
BUSHING (WELD-IN)
HITCH PIN (15.5")
AXLE CLAMP
SQUARE NUT
LOCK WASHER
1"x 7" BOLT gr 8
QTY
1
1
1
1
1
1
1
1
1
1
REF
2
4
4
1
1
1
2
2
2
REF
2
4
1
REF
REF
REF
REF
ITEM
21
22
23
24
25
26
27
28
29
30
31
32
or
33
or
34
or
35
or
36
or
37
or
38
or
PART #
1023812-kd
RF05031-00200-kd
RF01022-00241-kd
RF03021-00240-kd
1022327-kd
1024550-kd
R658-kd
B138-kd
C651-kd
C631-kd
R653-kd
1060701-kd
1061110-kd
1060601-kd
1060926-kd
1020677-kd
1062894-kd
1020678-kd
1062895-kd
R299-kd
R653-kd
B374-kd
B374-2-kd
B372-kd
B372-1-kd
DESCRIPTION
SHIM PLATE
LOCK WASHER
BOLT (1") GR 8
NUT (1") GR 8
BLADE (10" x 144")
FROST BIT
BLADE BOLT ASS'Y.
PIN (1.75"diam.)
CRANK ASS'Y.
PIN (1.75"diam.)
BALL SOCKET (1.75"id)
HUB ASS'Y.
HUB ASS'Y (SINGLE)
GRADER WHEEL
WHEEL
WEAR PLATE (LH)
WEAR PLATE (LH)
WEAR PLATE (RH)
WEAR PLATE (RH)
BALL SOCKET (1.43"id)
BALL SOCKET (1.75"id)
PIN (1.43" diam.)
PIN (1.75"diam.)
BUSHING (1.43"id)
BUSHING (1.75"id.)
QTY.
REF
REF
REF
REF
1
1
REF
1
REF
2
1
6
4
6
4
1
1
1
1
2
2
2
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
79
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 17CS
12’ Cutting Width
ITEM
1
or
2
or
or
3
or
4
5
or
or
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
&
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
1063527-kd
B187-kd
1063214-kd
C926-kd
D650-kd
D650-02-kd
1063282-kd
1020387-kd
1020526-kd
C071-504-kd
C740-kd
1060370-kd
1022953/979-kd
1022953/979-kd
7001-H017A-kd
B063-kd
B019-3-kd
B439-10-kd
C072-kd
1020295-kd
B581-kd
1023845-kd
1054802-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y
YOKE ASS'Y
YOKE ASS'Y
HITCH PIN (18")
HITCH PIN (2" DIAM)
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
HITCH (2")
GREASE FITTING
TONGUE
PIN
PIN
GATE CYL.
FRAME CYL.(6"bore)
FRAME CYL(6"bore)
DUMP CYL.
PIN WELD-IN
BUSHING (WELD-IN)
WASHER WELD-ON)
PIN (1.75" diam.)
BUSHING (WELD-IN)
HITCH PIN (15.5")
AXLE CLAMP
SQUARE NUT
QTY
1
1
1
1
1
1
1
1
1
1
1
REF
2
4
4
1
1
1
2
2
2
REF
2
4
1
REF
REF
ITEM
&
&
21
22
23
24
25
&
&
26
27
28
29
30
31
32
or
33
or
34
or
35
or
36
37
38
PART #
RF05031-00180-kd
RF01022-00265-kd
1023812-kd
RF05031-00200-kd
RF01022-00241-kd
RF03021-00240-kd
1061169-kd
1061157-kd
1061307-kd
R680-kd
N/A
B138-kd
C651-kd
C631-kd
R653-kd
1060701-kd
1061110-kd
1060601-kd
1060926-kd
1020677-kd
1062894-kd
1020678-kd
1062895-kd
R653-kd
B374-2-kd
B372-1-kd
DESCRIPTION
LOCK WASHER
1"x 7" BOLT gr*8
SHIM PLATE
LOCK WASHER
BOLT (1") GR 8
NUT (1") GR 8
BLADE (CENTER)
BLADE LEFT HAND
BLADE RIGHT HAND
BLADE BOLT ASS'Y.
QTY.
REF
REF
REF
REF
REF
REF
1
1
1
REF
PIN (1.75"diam.)
CRANK ASS'Y.
PIN (1.75"diam.)
BALL SOCKET (1.75"id)
HUB ASS'Y.
HUB ASS'Y (SINGLE)
GRADER WHEEL
WHEEL
WEAR PLATE (LH)
WEAR PLATE (LH)
WEAR PLATE (RH)
WEAR PLATE (RH)
BALL SOCKET (1.75"id)
PIN (1.75"diam.)
BUSHING (1.75"id.)
2
REF
REF
1
6
4
6
4
1
1
1
1
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
80
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 17E10.5
10.5’ Cutting Width
ITEM
1
2
3
OR
4
5
6
7
8
9
10
11
12
PART#
1063527-kd
1063282-kd
18A181-kd
1063466-kd
REF.
1062040-kd
1063750-kd
16A296B-kd
1064809-kd
1063525-kd
458665R-kd
18A151-kd
1063842-kd
DESCRIPTION
YOKE ASSY
HITCH ASSY
PIN
PIN
HYD HOSE SYSTEM
GATE LIFTING ARM
GATE LIFT CYLINDER
LIFT CYLINDER PIN
GATE LINK ASSEMBLY
RAIL, EJECTOR ROLLER
WEAR PLATE
BUSHING
PIN WELDMENT
QTY
1
1
1
1
REF
1
1
1
1
8
2
4
1
ITEM
13
14
OR
15
16
17
18
19
20
21
22
23
PART #
16A322A-kd
1063132-kd
10693133-kd
REF.
1062994-kd
1063562-kd
1063602-kd
1063550-kd
1023845-kd
1062751-kd
1062740-kd
18A135A-kd
DESCRIPTION
LIFT CYLINDER PIN
BLADE, 10 x 41.88
BLADE, 14 x 41.88
EJECTOR ASSY.
EJECTOR CYLINDER L.H.
EJECTOR CYLINDER R.H.
PIN WELDMENT
CARRIAGE CYLINDER
AXLE CLAMP
WHEEL ASSY
HUB ASSY
PIN WELDMENT
QTY.
1
2
2
REF
1
1
2
2
16
4
4
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
81
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10,12.5E,14E10.5,15.5E14,
17E10.5 & 20E16 EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
1023765-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
82
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 18C
14’ Cutting Width
ITEM
1
or
2
or
or
3
4
5
or
or
7
8
9
10
11
12
13
14
15
16
17
or
18
or
19
20
PART#
DESCRIPTION
QTY
B185-kd
HITCH PIN (12")
1
B581-kd
HITCH PIN (15.5")
1
B944-B-kd
YOKE ASS'Y.
1
1061093-kd
YOKE ASS'Y.
1
1063257-kd
YOKE ASS'Y.
1
B187-kd
HITCH PIN (18")
1
C926-kd
WEAR PLATE
1
D650-kd
HITCH (5bolt)
1
D650-02-kd
HITCH (7bolt)
1
1063282-kd
HITCH
1
*SEE HITCH ASSY'S FOR BUSHINGS
1020295-kd
BUSHING (WELD-IN)
2
C071-503-kd
PIN (1" DIAM.)
4
B133-kd
PIN (1.43" DIAM.)
4
1060370-kd
GATE CYL.
1
1022953-kd
FRAME CYL (6" BORE)
1
1022979-kd
FRAME CYL. (6" BORE)
1
7001-H017A-kd DUMP CYLINDER
2
B063-kd
PIN WELD-IN
2
B019-3-kd
BUSHING (WELD-IN)
2
B439-10-kd
WASHER (WELD-ON)
4
B162-kd
PIN (WELD-IN)
2
C072-kd
PIN (BOLT-IN)
2
B080-5B-kd
WHEEL (10 X 28)
4
1060601-kd
GRADER WHEEL (9 X 24)
4
B186-kd
HITCH PIN (13.5")
1
B025-3-kd
AXLE CLAMP
8
ITEM
or
&
&
21
22
23
24
25
PART #
B025-5-kd
RF01022-00840-kd
RF05031-00120-kd
RF05031-00180-kd
RF01022-00241-kd
RF03021-00240-kd
N/A
1024205-kd
26 1024550-kd
27
28
29
or
30
31
32
or
33
34
R658-kd
R659-kd
B137-kd
B138-kd
B138-kd
R653-kd
1021144-kd
B952-kd
B596-kd
C763-1
DESCRIPTION
AXLE CLAMP (WELD-ON)
BOLT, HEX 5/8"-11NC X 3"
LOCKWASHER, 5/8"
LOCKWASHER, 1"
BOLT 1" NC X 5-1/2 GR5
NUT (1") GR 8
CARRIAGE WELDMENT
BLADE (10 x 168)
FROST BIT (66")
QTY.
8
REF
REF
REF
REF
REF
1
1
1
BLADE BOLT ASS'Y.
8
FROST BIT BOLT ASS'Y.
6
PIN ASSEMBLY (1.43" DIAM) REF
PIN ASSEMBLY (1.75" DIAM) REF
PIN ASSEMBLY (1.75" DIAM) REF
BALL SOCKET (1.75"id)
1
DUAL HUB ASS'Y (2.25" AXLE) 2
HUB ASS'Y.
2
SPILLOVER RACK
1
WEAR PLATE (LH)
1
35 C763-2
WEAR PLATE (RH)
1
36 R299-kd
37 B374-kd
38 B372-kd
BALL SOCKET (1.43"id)
PIN
BUSHING WELD-IN
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
83
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 18CFB
14’ Cutting Width
ITEM
PART#
1 B185-kd
or B581-kd
2 B944-B-kd
or 1061093-kd
3 B187-kd
4 C926-kd
5 D650-kd
or D650-02-kd
6 1020387-kd
7 D549-kd
8 C071-503-kd
9 C740-kd
10 1060370-kd
11 1022953/979-kd
12 1022953/979-kd
13 1020740-kd
14 1020526-kd
& RF01022-00180-kd
17 D549-kd
18 B080-5B-kd
or 1024516-kd
or 1060601-kd
19 1020295-kd
20 B025-3-kd
& B025-5-kd
& RF01022-00840-kd
& RF05031-00120-kd
OR 1023845-kd
& 1023812-kd
& 1054802-kd
DESCRIPTION
HITCH PIN (12")
HITCH PIN (15.5")
YOKE ASS'Y
YOKE ASS'Y
HITCH PIN (18")
WEAR PLATE
HITCH (5bolt)
HITCH (7bolt)
GREASE FITTING
LEVELING CAM
PIN
PIN
GATE CYL. (2.5" shaft)
FRAME CYL (6" bore)
FRAME CYL(6"bore)
BUCKET CYLINDER
TONGUE
BOLT 1" X 3 1/2" G8
LEVELING CAM (BOLT IN)
WHEEL
WHEEL
GRADER WHEEL
BUSHING (WELD-ON)
AXLE CLAMP
AXLE PLATE (WELD-ON)
BOLT, HEX 5/8X 3"
LOCKWASHER 5/8"
AXLE CLAMP
AXLE CLAMP SHIM
SQUARE NUT
QTY
1
1
1
1
1
1
1
1
REF
1
4
4
1
1
1
2
1
REF
1
4/6
4
4/6
2
REF
REF
REF
REF
REF
REF
ITEM
PART #
& RF01022-00265-kd
21 RF05031-00180-kd
& RF01022-00241-kd
& RF03021-00240-kd
22 C837-kd
23 D330-kd
24 N/A
25 1020742-kd
27 R658-kd
28 RF02131-00160-kd
& RF03021-00268-kd
29 C651-kd
30 B138-kd
31 R653-kd
32 B951-kd
or B952-kd
or 1043343-kd
33 D591-kd
34 C763-1-kd
& C763-2-kd
35 1020378-kd
& 1020379-kd
36 R299-kd
37 C815-kd
38 C875-kd
& C876-kd
39 R763-kd
40 N/A
41 C631-kd
42 C786-kd
DESCRIPTION
1" x 7" BOLT gr*8
1" LOCK WASHER
1" x 5.5" gr*8 BOLT
NUT (1") GR 8
BLADE HINGE (WELD-IN)
GATE ASS'Y.
CARRIAGE WELDMENT
BLADE (10" x 168")
BLADE BOLT ASS'Y.
SET SCREW
SET SCREW NUT
CRANK ASS'Y.
PIN (1.75"diam.)
BALL SOCKET (1.75"id)
HUB ASS'Y (SINGLE)
HUB ASS'Y (DUAL)
HUB ASS'Y (DUAL)
SPILLOVER RACK
WEAR PLATE LH
WEAR PLATE RH
WING BIT LH
WING BIT RH
BALL SOCKET (1.43"id)
PIN (1.43" diam.)
GATE BRACKET LH WELD-IN
GATE BRACKET RH WELD-IN
SEQUENCE VALVE
N/A
PIN (1.75"diam.)
GIMBAL SOCKET
QTY.
REF
REF
REF
REF
REF
1
1
17
1
1
REF
4
1
REF
REF
REF
1
1
1
1
1
2
2
1
1
1
N/A
REF
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
84
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 18CMX
12.5’ Cutting Width
ITEM
1
&
2
3
4
5
6
7
8
&
&
PART #
1063527-kd
1063282-kd
1063466-kd
1063467-kd
1063463-kd
1063518-kd
1063462-kd
1063465-kd
1023845-kd
RF05031-00180-kd
RF01022-00265-kd
DESCRIPTION
Yoke Assembly
Hitch Assembly
Pin Weldment 2 1/4" x 8 1/2"
Pin Weldment 2 1/4" x 5.44"
Pin Weldment 2" x 5 3/4"
Bucket Cylinder
Pin Weldment 2" x 5 1/4"
Pin Weldment 2 1/4" x 5.44"
Axle Bracket Clamp
Flat washer 1"
Hex Bolt 1" x 7"
QTY
1
1
1
1
2
2
4
1
REF
REF
REF
ITEM
9
10
11
12
13
&
14
&
15
16
PART #
1062740-kd
1062751-kd
1063308-kd
1063461-kd
1063451-kd
1063452-kd
1062894-kd
1062895-kd
1063485-kd
1063468-kd
DESCRIPTION
QTY
Hub Assembly
4
Wheel, 3 pc.
4
Carriage Cylinder
2
Pin Weldment 2" x 5 1/4"
2
Blade, 3/4" x 10" x 49.88" end
2
Blade, 3/4" x 14" x 49.88" center 1
Wear Plate, Left
1
Wear Plate, Right
1
Gate Cylinder
1
Pin Weldment 2" x 7.13"
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
85
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 18CS
14’ Cutting Width
ITEM PART#
DESCRIPTION
HITCH PIN (12")
1 B185-kd
HITCH PIN (15.5")
or B581-kd
YOKE ASS'Y. BOLT TYPE
2 1063257-kd
HITCH PIN (2")
3 1063284-kd
THRUST WASHER
4 1063146-kd
HITCH
5 1063282-kd
*SEE YOKE/HITCH ASSY FOR BUSHINGS
GREASE FITTING
6 1020837-kd
BUSHING (WELD-IN)
7 1020295-kd
PIN (1" DIAM.)
8 C071-503-kd
PIN (1.43" DIAM.)
9 C740-kd
GATE CYL.
10 1060370-kd
11 1022953/979-kd FRAME CYL. LH (6" BORE)
12 1022953/979-kd FRAME CYL. RH (6"bore)
13 7001-H017A-kd DUMP CYLINDER
PIN WELD-IN
14 B063-kd
BUSHING (WELD-IN)
15 B019-3-kd
WASHER (WELD-ON)
16 B439-10-kd
B138-kd
PIN
ASSEMBLY (1.75"diam)
17
PIN (BOLT-IN)
or C072-kd
WHEEL (17.5 X 25)
18 1060926-kd
WHEEL (20.5 X 25)
or 1062751-kd
HITCH PIN (13.5")
19 B186-kd
AXLE CLAMP (2pce STYLE)
20 1023845-kd
QTY
1
1
1
1
REF
1
REF
2
4
4
1
1
1
2
2
2
4
2
2
4
1
1
REF
ITEM
&
&
&
21
22
23
24
25
26
27
28
&
&
29
30
31
32
or
33
34
35
36
37
38
PART #
1054802-kd
RF01022-00265-kd
1054802-kd
RF05031-00180-kd
RF01022-00241-kd
RF03021-00240-kd
SPECIAL ORDER
1063311-kd
R680-kd
1063310-kd
RF03021-00240-kd
RF05031-00180-kd
RF01022-00198-kd
C651-kd
C631-kd
R653-kd
1062750-kd
1062740-kd
C631-kd
C763-1-kd
C763-2-kd
R653-kd
B374-2-kd
B372-1-kd
DESCRIPTION
SQUARE NUT (1")
1" x 7" GR 8 BOLT
SQUARE NUT (1")
LOCKWASHER, 1"
BOLT 1" NC X 5-1/2 GR5
NUT (1") GR 8
CARRIAGE WELDMENT
BLADE (55.88")
BLADE BOLT ASS'Y.
BLADE SERRATED OPTION
NUT (1") GR 8
WASHER 1" LOCK
BOLT 1" X 3-3/7 GR8
HORSEHEAD
PIN ASSEMBLY (1.75" DIAM)
BALL SOCKET (1.75"id)
SINGLE HUB ASSY
HUB ASS'Y (SINGLE -10 bolt)
PIN ASSEMBLY (1.75" DIAM)
WEAR PLATE (LH)
WEAR PLATE (RH)
BALL SOCKET (1.75"id)
PIN (1.75"id)
BUSHING WELD-IN
QTY.
REF
REF
REF
REF
REF
REF
1
3
REF
1
REF
REF
REF
1
REF
REF
4
4
REF
1
1
2
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
86
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 20E16
16’ Cutting Width
ITEM
PART#
DESCRIPTION
QTY
ITEM
PART #
DESCRIPTION
DRAWBAR PIN, 12.5"
1
1 B185-kd
21 RF05031-00130-kd LOCK WASHER, 1"
DRAWBAR PIN, 15.5"
1
or B581-kd
22 RF01022-00241-kd BOLT, 1"
YOKE ASS'Y, 1.5" PIN
1
2 B944-B-kd
23 RF03021-00240-kd NUT, 1"
YOKE ASS'Y, 1.5" PIN
1
or 1061093-kd
24 RF01031-00180-kd BOLT, .625 x 2.5"
VERTICAL HITCH PIN, 1.5"
1
3 B187-kd
25 RF05031-00120-kd LOCK WASHER, .625"
WEAR PLATE
1
4 C926-kd
26 RF05020-00100-kd WASHER, .625"
HITCH, 5 BOLT
1
5 D650-kd
27 RF03021-00119-kd NUT, .625
HITCH, 7 BOLT
1
OR D650-02-kd
28 RF01031-00140-kd BOLT, .625 x 1.75"
BUSHING, HITCH
1
ROUTER BIT, LEFT
6 C920-kd
29 1024961-kd
BUSHING, HITCH FLANGED 1
ROUTER BIT, RIGHT
& C921-kd
30 1024960-kd
PIN WELDMENT
2
BLADE
7 1023489-kd
31 1060799-kd
PIN WELDMENT
3
BOLT, FROST BIT
8 B133-kd
32 R659-kd
PIN WELDMENT
4
BOLT, BLADE, .625 x 2"
9 1060656-01-kd
33 R658-kd
PIN WELDMENT
2
REAR ROUTER BIT
10 B138-kd
34 1022421-kd
PIN WELDMENT
4
CARRIAGE WELDMENT
11 C072-kd
35 1024080-kd
GATE CYLINDER
1
12 1023257-kd
36 RF01022-00150-kd BOLT, HEX, 1 x 3"
EJECTOR CYLINDER, LH
1
13 1023867-01-kd
37 RF03021-00240-kd NUT, 1"
EJECTOR CYLINDER, RH
1
14 1023868-01-kd
38 RF05031-00180-kd LOCK WASHER, 1"
FRAME CYLINDER, 5 x 16"
2
15 1025448-kd
39 RF01022-00225-kd BOLT, HEX, 1 x 4.5"
SKID PAD ASS'Y
2
BOLT SPACER
16 1029280-01-kd
40 1023799-kd
RAIL WELDMENT
2
17 1023765-kd
41 RF01022-00180-kd BOLT, HEX, 1 x 3.5"
WHEEL ASS'Y
4
ROLLER PIN WELDMENT
18 1024516-kd
42 1021764-kd
AXLE CLAMP
12
ROLLER ASS'Y
19 1023845-kd
43 1022532-kd
24
THRUST WASHER
& RF01022-00265-kd BOLT, 1 x 7"
44 1021678-kd
24
& RF05031-00180-kd LOCK WASHER, 1"
45 RF02022-00440-kd CAP SCREW, .5 x 1.25"
SQ. NUT
24
& 1054802-kd
46 RF05031-00090-kd LOCK WASHER, .50"
HUB ASS'Y
4
47 RF02022-00460-kd CAP SCREW, .50 x 1.5"
20 1023846-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
QTY.
5/7
5/7
5/7
6
31
51
36
6
1
1
2
4
20
2
1
4
54
22
22
22
4
4
4
4
8
32
24
87
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS 12E10,12.5E,14E10.5,15.5E14,
17E10.5 & 20E16 EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
1023765-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
88
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LS
14, 16, 18’ Cutting Width
ITEM PART#
1 B575-kd
1030266-kd
2 N/A
3 C963-kd
REF
4 D384-kd
REF
C959-14-kd
5
or C959-16-kd
or C959-18-kd
6 D309-kd
or D310-kd
REF
7 B812-kd
or B876-kd
or D502-kd
or R658-kd
8 D474-kd
DESCRIPTION
Hitch Assembly
Bolt, NC 1 x 4 1/2"
Hydraulic System
Tongue Assembly
Bolt, NC 3/4 x 2 "
Tie Rod Assy
Bolt, NC 3/4 x 2 "
Bowl Weldment Assy. (LS-14)
Bowl Weldment Assy. (LS-16)
Bowl Weldment Assy. (LS-18)
Wear Plate Assy, Left
Wear Plate Assy, Right
Carriage Bolt, 5/8 x 1 3/4"
Blade, (LS-14)
Blade, (LS-16)
Blade, (LS-18)
Plow Bolt, 5/8 x 1 3/4"
Laser Mounting Platform
QTY
1
2
1
1
9
2
8
1
1
1
1
1
18
1
1
1
14,16,18
1
ITEM
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART #
7001-H012-kd
B850-kd
B863-kd
B864-kd
R133-kd
B866-kd
B880-kd
REF
B881-kd
1020336-kd
REF
REF
REF
B875-kd
REF
1022368-kd
A512-507-kd
1021591-kd
DESCRIPTION
QTY.
Hydraulic Cylinder
2
Transport Leg Assembly
2
Pin Assembly
6
Pin Assembly
4
Pin Assembly
2
Clip Pin
2
Carriage Stop Assembly
2
Bolt, NC 3/4 x 4 1/2"
4
Adjusting Screw, Nc 1 x 5 1/2"
2
Axle Carrier Assembly
1
Bolt, NC 1 x 2 1/2"
4
Set Screw, NC 1 x 6"
2
Jam Nut, NC 1"
2
Axle Spindle
4
Bolt, NC 1/2 x 3 1/2"
4
Hub Assembly
4
Wheel and Tire Assembly
4
Skid Pad Assembly
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
89
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LS SKID PAD ASS’Y
Item
REF
1
2
3
4
5
&
&
6
7
&
&
8
9
10
&
Part #
Description
1021591-kd
Skid Pad Assy. (*)
1021262-kd
Skid Weldment
1021273-kd
Position Plate
1023123-kd
Spacer
1021276-kd
Support Plate
RF02022-00520-kd
Bolt, NC 1/2 x 2 1/4"
RF03021-00081-kd
Nut, Hex NC 1/2"
RF05031-00090-kd
Lock Washer 3/4"
1021264-kd
Rod Weldment
RF02022-01140-kd
Bolt, NC 3/4 x 6"
RF03021-00190-kd
Nut, Hex NC 3/4"
RF05031-00141-kd
Lock Washer 3/4"
1021265-kd
Adjusting Screw Assy.
1021551-kd
Pin Weldment
14A658-kd
Hair Pin
A644-kd
Crate
* 2 required per unit, 1 skid pad includes items 1-10
Qty
n/a
1
2
1
4
8
8
8
1
2
2
2
1
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
90
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LSE
12, 14, 16’ Cutting Width
ITEM
1
or
2
or
3
4
5
or
6
7
8
9
10
11
12
13
PART#
B185-kd
B581-kd
B944-B-kd
1061093-kd
B187-kd
C926-kd
D650-kd
D650-02-kd
N/A
RF03021-00240-kd
1020837-kd
RF01011-00180-kd
1021863-kd
D895-kd
D896-kd
1022421-kd
1022327-kd
1022472-kd
1021261-kd
DESCRIPTION
QTY
HITCH PIN (12")
1
HITCH PIN (15.5")
1
YOKE ASS'Y.
1
YOKE ASS'Y.
1
HITCH PIN (18")
1
WEAR PLATE
1
HITCH (5bolt)
1
HITCH (7bolt)
1
GOOSE NECK ASS'Y
NUT 1"
GREASE FITTING
5
BOLT 1" X 3 1/2" G8
4
TONGUE
1
WEAR PLATE
1
WEAR PLATE
1
SHOE PLATE
1
BLADE LSE 12
1
BLADE LSE 14 (2 PIECE)
2
BLADE LSE 16 (2 PIECE)
2
ITEM
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
PART #
R658-kd
7001-H021-kd
R619-kd
R631-kd
B133-kd
1020068-kd
1022342-kd
1022474-kd
1020987-kd
RF05031-00180-kd
RF01022-00241-kd
RF03021-00240-kd
1060844A-kd
1021161-kd
1060843-kd
1023971-kd
1061970-kd
TANDEM
DESCRIPTION
QTY.
BLADE BOLT 5/8" X 2"
CYLINDER
2
WHEEL 11 X 16.1
4
TIRE 13.5 X 16.1
4
PIN
REF
HUB ASSEMBLY
4
EJECTOR ASS'Y (LSE 12) REF
EJECTOR ASS'Y (LSE 14) REF
EJECTOR ASS'Y (LSE 16) REF
LOCKWASHER 1"
16
BOLT (1") NC X 5 1/2 G5
5\7
NUT (1") GR 8
5\7
WRIST PIN
REF
SPINDLE
REF
CAM PLATE
REF
SKID SHOE
REF
WALKING BEAM
1
SEE DIAGRAM
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
91
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LSE 12,14 &16 WALKING
TANDEM ASSEMBLY
Item
Part #
Description
Qty
1
1060843-kd
Cam Plate
2
2
1061966-kd
Thrust Washer
4
3
1061723A-kd
Flanged Bushing
4
4
1060844-kd
Wrist Pin
2
5
1061538A-kd
Cylinder Pin
2
6
1021161-kd
Spindle Assy.
4
7
Special order
Walking Beam
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
92
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LSE 7 & 10
EJECTOR MECHANISM
Item
Part #
Description
Qty.
1
123322-kd
Roller rail Weldment
8
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
93
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
REYNOLDS LSE 12,14 &16
EJECTOR MECHANISM
Item #
Part #
Description
Qty.
1
1022177-kd
Roller rail Weldment
4
2
1021764-kd
Roller pin Weldment
4
3
1021678-kd
Thrust washer
4
4
1022081-kd
Bronze wear bushing
4
5
1021648-kd
Roller w/o bushing
4
5(A)
1022532-kd
Roller w/ bushing
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
94
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Scoop-All
Please call for pricing & availability of parts for Scoop-All Scrapers
K D Sales stock various parts for Scoop-All scrapers.
Please call for pricing and availability for specific items.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
95
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 2
Cylinder &
Cylinder
Components
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
96
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CYLINDER SEAL KITS
7040-H012-kd (3.5” bore x 1.5”shaft)
7040-H014-kd (3” bore x 1.5” shaft)
7040-H017-kd (3.5” bore x 2”shaft
7040-H019-kd (4”bore x 1.75” shaft)
7040-H023-kd (5” bore x 2” shaft)
7040-H026-kd (2.5” bore x 1.5” shaft)
1020306-kd (6”bore x 2” shaft)
1020878-kd (6” bore x 2” shaft)
1020879-kd (3.5” bore x 2” shaft)
1023060-kd (6” bore x 2.5” shaft)
The following seal kits are the most popular sizes for Reynolds® Cylinders.
We have a wide selection of seal kits for other various size cylinders.
Please call for availibility and accuracy of any size seal kit.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
97
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CYLINDER WELD-ON ENDS (OPTIONS)
SHAFT
END
Part #
A712-kd
TUBE
END
Description
A…1" ID
B…1.5"
A712-503-kd A…1" ID
B…2"
B105-503-kd A…1.43" ID
B…1.75"
C138-kd
A…1.43" ID
B…2"
1022968-kd A…1.43" ID
B…2.5"
C619-kd
A…1.75" ID
B…2"
Part #
A712-501-kd
B105-kd
C138-501-kd
C620-kd
Description
A…1" ID
B….75"
A…1.43" ID
B….75"
A…1.43" ID
B…1"
A…1.75" ID
B…1.25"
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
98
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CYLINDER PIN (OPTIONS) (NOT ALL SIZES LISTED)
1" dia. PINS
Item
1
2
3
4
Part #
C071-kd
C071-501-kd
C071-503-kd
C071-504-kd
Description
1 x 3" PIN ASSY
1 x 5.5" PIN ASSY
1 x 3.75" PIN ASSY
1 x 4.25" PIN ASSY
Qty
1
1
1
1
1.43" dia. PINS
Item
1
2
3
4
5
Part #
B133-kd
B137-kd
B374-kd
C740-kd
C815-kd
Description
1.43 x 3.25" PIN ASSY
1.43 x 8.75" PIN ASSY
1.43 x 4.75" PIN ASSY
1.43 x 4.50" PIN ASSY
1.43 x 3.50" PIN ASSY
Qty
1
1
1
1
1
1.75" dia. PINS
Item
1
2
3
4
5
6
7
8
Part #
B063-kd
B162-kd
B188-3-kd
B374-2-kd
C072-kd
C072-1-kd
C631-kd
1060314-kd
Description
PIN (WELD IN) (7.5")
PIN (WELD IN) (5.75")
PIN (WELD IN) (8")
PIN WELDMENT (8")
PIN WELDMENT (5.25")
PIN WELDMENT (6.5")
PIN WELDMENT (10")
PIN (WELD IN) (8")
Qty
1
1
1
1
1
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
99
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN: 1020722-kd (replaced by 1022952-kd)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
*replaced by 1022952-kd
Bore: 6”
Stroke: 16.625”
Collapsed: 29.50”
Extended: 42.6125”
Seal Kit: 1020878-kd
Item
Part #
Description
Qty.
1
1020725-kd
Cylinder Tube
1
2
RF03051-00170-kd Lock nut (1.5”)
1
3
R593-1029-kd*
Cast iron ring
2
4
R295-253-kd*
O-ring
1
5
R594-253-kd*
Teflon ring
1
6
7006-H028-kd
Piston (6”bore)
1
7
R295-256-kd*
O-ring
1
8
R466-256-kd*
Back-up
1
9
7002-H013-kd
Head (6”bore)
1
10
R283-2000-kd*
Rod seal (2”)
1
11
R595-2000-kd*
Rod wiper (2”)
1
12
R295-222-kd*
O-ring
1
13
1020721-kd
Cyl. Rod (2”dia)
1
14
7029-H004-kd
Washer
2
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1020878-kd Seal kit contains items w/*
1020878N-kd seal kit contains items w/* less item 3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
100
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN: 1020740-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 37”
Collapsed: 46.50”
Extended: 83.50”
Seal Kit: 1020879-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part #
1020737-kd
RF03051-00160-kd
R608-1-kd
R593-1017-kd*
R295-151-kd*
R594-151-kd*
1020744-kd
R608-1-kd
R295-338-kd*
R466-338-kd*
1020375-kd
R283-2000-kd*
R595-2000-kd*
R295-218-kd*
HR72-13-kd
Description
TUBE WELDMENT
LOCKT NUT, NF 1.25"
NUT PLATE
CAST IRON PISTON RING
O-RING SEAL (PISTON)
LOADED TEFLON RING
PISTON
SHOULDER PLATE
O-RING SEAL (HEAD)
BACK-UP RING
HEAD
ROD SEAL
ROD WIPER
O-RING SEAL (ROD)
ROD WELDMENT 2" Dia.
Qty.
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1020879-kd Seal kit contains items w/*
1020879N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
101
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN: 1021668-kd (RH) & 1021669-kd (LH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3”
Stroke: 29”
Collapsed: 41.75”
Extended: 70.75”
Seal Kit: 7040-H014-kd
Item
1
Part #
1021668-kd (rh)
Description
1021669-kd (lh)
Qty.
1021670-kd
TUBE WELDMENT (left)
1
1021671-kd
TUBE WELDMENT (right)
1
2
RF03051-00142-kd JAM NUT, NF 1"
1
3
RF05020-00180-kd WASHER
1
4
R593-1013-kd*
SEAL (CAST IRON)
2
5
R295-145-kd*
O-RING (PISTON)
1
6
R594-145-kd*
TEFLON RING
1
7
7006-H002-kd
PISTON
1
8
R638-kd
SHOULDER PLATE
1
9
R295-334-kd*
O-RING (HEAD)
1
10
R466-334-kd*
BACK-UP RING
1
11
7002-H009-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H013-kd
CYL ROD (1.5" Dia)
7040-H014-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H014N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
102
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
ORB :(2) X066-12-12-kd
PN: 1022952-kd IFFITTINGS
ARE REQUIRED
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
CO 29.50
L-
Bore: 6”
Stroke: 13.125”
Collapsed: 29.50”
Extended: 42.625”
Seal Kit: 1023060-kd
Item
Part #
Description
Qty.
1
1022954-kd
Tube
1
2
1022422-kd
Lock nut (1.75”)
1
3
R593-1029-kd*
Steel ring
2
4
R295-253-kd*
O-ring
1
5
R594-253-kd*
Teflon ring
1
6
1022959-kd
Piston, Alum. (6”bore)
1
7
R295-256-kd*
O-ring
1
8
R466-256-kd*
Back-up
1
9
1065984-kd
Head, Steel (6”bore)
1
10
R283-2500-kd*
Rod seal (2.5”)
1
11
R595-2500-kd*
Rod wiper (2.5”)
1
12
R295-222-kd*
O-ring
1
13
1022960-kd
Rod (2.5”dia)
1
14
1022958-kd
Washer
2
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
1023060N-kd seal kit contains items w/* less item 3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
103
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
C138-501,
Tube End Ass’y
PN:1022953/979-KD
R299, Ball
Socket
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Used as left or right hand cylinder
Bore: 6”
Stroke: 12”
Collapsed: 25.50”
Extended: 37.50”
1022968, Rod End Ass’y
Seal Kit: 1023060-kd
R299, Ball Socket
Item
Part #
Description
Qty.
1
1022965/978-kd
Tube
1
2
1022422-kd
Lock nut (1.75”)
1
3
R593-1029-kd*
Steel ring
2
4
R295-253-kd*
O-ring
1
5
R594-253-kd*
Teflon ring
1
6
1022970-kd
Piston, Steel (6”bore)
1
7
R295-256-kd*
O-ring
1
8
R466-256-kd*
Back-up
1
9
1065984-kd-kd
Head, Steel (6”bore)
1
10
R283-2500-kd*
Rod seal (2.5”)
1
11
R595-2500-kd*
Rod wiper (2.5”)
1
12
R295-222-kd*
O-ring
1
13
1022971-kd
Rod (2.5”dia)
1
IF ORB :(2) X066-08-08-kd
FITTINGS ARE REQUIRED
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
1023060N-kd seal kit contains items w/* less item 3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
104
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023257-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 36”
Collapsed: 47.125”
Extended: 83.125”
Seal Kit: 7040-H019-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
Part #
Description
1023259-kd
RF03051-00160-kd
R609-kd
R593-1021-kd*
R295-153-kd*
R594-153-kd*
7006-H004-kd
R609-kd
R295-342-kd*
R466-342-kd*
7002-H007-kd
R283-1750-kd*
R595-1750-kd*
R295-024-kd*
1023261-kd
B439-8-kd
1023489-kd
TUBE WELDMENT
JAM NUT, 1.25"
NUT PLATE
CAST IRON PISTON RING
O-RING (PISTON)
TEFLON RING
PISTON (4" BORE)
SHOULDER PLATE
O-RING (HEAD)
BACK-UP RING
HEAD (4" BORE)
ROD SEAL
ROD WIPER
O-RING SEAL (ROD)
CYL ROD (1.75" Dia)
BUSHING
PIN
Qty.
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
2
Item #18 is not included in
cylinder assembly
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H019-kd Seal kit contains items w/*
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
105
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023338-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 29”
Collapsed: 39.75”
Extended: 68.75”
Seal Kit: 7040-H019-kd
Item
Part #
Description
Qty.
1
1023245-kd
TUBE WELDMENT
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R608-1-kd
NUT PLATE
1
4
R593-1017-kd*
IRON PISTON RING
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
1020744-kd
PISTON (3.5" BORE)
1
8
R608-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
1023537-kd
HEAD (3.5" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-018-kd*
O-RING SEAL (ROD)
1
15
1023427-kd
CYL ROD (1.5" Dia)
1
16
7032-H004-kd
STOP TUBE
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1025378-kd Seal kit contains items w/*
1025378N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
106
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023867/68-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 35”
Collapsed: 46.75”
Extended: 81.75”
Seal Kit: 7040-H012-kd
Item
Part #
Description
Qty.
1
1023869-kd
TUBE WELDMENT (LH)
1
or
1023870-kd
TUBE WELDMENT (RH)
1
2
RF03051-00142-kd
LOCK NUT, NF 1"
1
3
RF03051-00180-kd
FLATWASHER
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H010-kd
PISTON
1
8
R638-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H008-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
1023274-kd
CYL ROD (1.5" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H012-kd Seal kit contains items w/*
7040-H012N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
107
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023867/68-01-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 35”
Collapsed: 48.125”
Extended: 83.125”
Seal Kit: 7040-H019-kd
Item
Part #
Description
Qty.
1
1023869-01-kd
TUBE WELDMENT (LH)
1
1
1023870-01-kd
TUBE WELDMENT (RH)
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R609-kd
FLATWASHER
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-023-kd*
O-RING SEAL (ROD)
1
15
1023274-01-kd
CYL ROD (1.75" Dia)
7040-H019-kd Seal kit contains items w/*
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
108
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1025448-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 16”
Collapsed: 29.50”
Extended: 45.50”
Seal Kit: 7040-H023-kd
Item
Part #
Description
Qty.
1
1025446-kd
Cylinder Tube
1
2
RF03051-00164-kd
Lock nut (1.375”)
1
3
R610-kd
Washer
1
4
R593-1025-kd*
Steel ring
2
5
R295-157-kd*
O-ring
1
6
R594-157-kd*
Teflon ring
1
7
7006-H011-kd
Piston
1
8
R610-kd
Nut plate
1
9
R295-350-kd*
O-ring
1
10
R466-350-kd*
O-ring
1
11
1065774-kd
Gland (5”bore)
1
12
R283-2000-kd*
Rod seal
1
13
R595-2000-kd*
Rod wiper
1
14
R295-025-kd*
O-ring
1
15
7012-H025HD-kd
Cyl. Rod
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H023-kd Seal kit contains items w/*
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
109
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1025501-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
26
30 .00”
.75
”
Description:
Bore: 2.5”
Stroke: 4.75”
Collapsed: 26.00”
Extended: 30.75”
Seal Kit: 7040-H019-kd
Item
Part #
Description
TUBE WELDMENT
Qty.
1
1025502-kd
1
2
RF03051-00142-kd LOCK NUT, NF 1"
1
3
R638-kd
NUT PLATE
1
4
R593-1009-kd*
SEAL (CAST IRON)
2
5
R295-137-kd*
O-RING (PISTON)
1
6
R594-137-kd*
TEFLON RING
1
7
7006-H026-kd
PISTON (2.5" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-228-kd*
O-RING (HEAD)
1
10
R466-228-kd*
BACK-UP RING
1
11
7002-H001-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
1025506-kd
CYL ROD (1.5" Dia)
1
16
1025554-kd
STOP TUBE
7040-H019-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
110
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1026142-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 14.25”
Collapsed: 27.25”
Extended: 41.50”
Seal Kit: 7040-H026-kd
Item
1
Part #
1026141-kd
Description
TUBE WELDMENT
Qty.
1
2
RF03051-00160-kd
LOCK NUT 1.25”NF
1
3
R609-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON (4" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD (4" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
1026138-kd
CYL ROD (1.75" Dia)
7040-H026-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H026N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
111
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1030789-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 16”
Collapsed: 35.125”
Extended: 51.125”
Seal Kit: 1023060-kd
Item
Part #
Description
Qty.
1
1030790-kd
TUBE WELDMENT
1
2
1022422-kd
LOCK NUT, 1 3/4"
1
3
1022958-kd
BACK-UP WASHER
2
4
R593-1029-kd*
IRON RING
2
5
R594-253-kd*
TEFLON SEAL
1
6
R295-253-kd*
O-RING EXPANDER
1
7
1022959-kd
PISTON
1
8
R295-256-kd*
O-RING (SEAL)
1
9
R466-256-kd*
BACK-UP RING
1
10
1065984-kd
HEAD,CAST IRON
1
11
R283-2500-kd*
ROD SEAL
1
12
R595-2500-kd*
WIPER
1
13
1029294-kd
ROD WELDMENT
1
14
HC32-07-kd
BUSHING
1023060-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
2
1023060N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
112
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1041984-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
34 26
.25 ” C
” E ol
xte laps
nd ed
ed
Description:
Bore: 2.5”
Stroke: 8.25”
Collapsed: 26.00”
Extended: 34.25”
Seal Kit: 7040-H026-kd
Item
Part #
Description
Qty.
1
1042244-kd
TUBE WELDMENT
1
2
RF03051-00142-kd
LOCK NUT, 1"
1
3
R638-kd
NUT PLATE
1
4
R593-1009-kd*
SEAL (CAST IRON)
2
5
R295-137-kd*
O-RING (PISTON)
1
6
R594-137-kd*
TEFLON RING
1
7
7006-H026-kd
PISTON (3" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-228-kd*
O-RING (HEAD)
1
10
R466-228-kd*
BACK-UP RING
1
11
7002-H001-kd
HEAD (3" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
1025506-kd
CYL ROD (1.5" Dia)
7040-H026-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H026N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
113
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060370-kd
Requires 2-orb fittings
PN# X066-12-12-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 15.25”
Collapsed: 29.50”
Extended: 44.75”
Seal Kit: 1023060-kd
Item
Part #
Description
Qty.
1
1060371-kd
TUBE WELDMENT
1
2
1022422-kd
JAM NUT, 1 3/4"
1
3
R593-1029-kd*
RING (CAST IRON)
2
4
R295-253-kd*
O-RING (PISTON)
1
5
R594-253-kd*
TEFLON RING
1
6
1022970-kd
PISTON (6" BORE)
1
7
R295-256-kd*
O-RING (HEAD)
1
8
R466-256-kd*
BACK-UP RING
1
9
1065984-kd
GLAND, CAST IRON
1
10
R283-2500-kd*
ROD SEAL
1
11
R595-2500-kd*
ROD WIPER
1
12
R295-222-kd*
O-RING (ROD)
1
13
1060372-kd
SHAFT (2.5" dia)
1023060-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
1023060N-kd seal kit contains items w/* less item 3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
114
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063750-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 16”
Collapsed: 35.125”
Extended: 51.125”
Seal Kit: 1023060-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part
Description
1063749-kd
TUBE WELDMENT
1022422-kd
LOCKNUT, 1.75"
1022958-kd
BACK UP WASHER
*R593-1029-kd IRON RING
*R594-253-kd TEFLON SEAL
*R295-253-kd "O" RING EXPANDER
1022959-kd
PISTON
HC15-03-kd
STOP TUBE
*R455-358-kd "O" RING SEAL
*R466-358-kd BACK UP RING
1065984-kd
GLAND
1063155-kd
WEAR RING
*R283-2500-kd ROD SEAL
*R295-2500-kd WIPER
1029294-kd
CYLINDER ROD
R295-224-kd
"O" RING
HC32-07-kd
BUSHING
1023060-kd Seal kit contains items w/*
Qty
1
1
2
2
1
1
1
1
1
2
1
1
1
1
1
1
2
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
115
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1066273-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 17.44”
Collapsed: 30.94”
Extended: 48.38”
Seal Kit: 7040-H023-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part
Description
10666274-kd
TUBE WELDMENT
RF03051-00164-kd
LOCKNUT, 1.375"
R610-kd
SHOULDER PLATE
*R593-1025-kd
SEAL, CAST IRON
*R295-157-kd
"O" RING SEAL
*R594-157-kd
TEFLON RING
7006-H011-kd
PISTON
*R295-350-kd
"O" RING SEAL
*R466-350-kd
BACK UP RING
1065802-kd
WEAR RING
1065774-kd
GLAND
*R283-2000-kd
ROD SEAL
*R595-2000-kd
ROD WIPER
*R295-025-kd
"O" RING SEAL
1066278-kd
CYLINDER ROD
7040-H023-kd Seal kit contains items w/*
Qty
1
1
2
2
1
1
1
1
1
2
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
116
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060514-kd (RH)
PN# 1060515-kd (LH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 29”
Collapsed: 41.75”
Extended: 70.75”
Seal Kit: 7040-H023-kd
Item #
Part #
Description
Qty.
1
1060516-kd
TUBE (RH)
1
1
1060518-kd
TUBE (LH)
1
2
RF03051-00142-kd
LOCK NUT, NF 1"
1
3
R487-kd
NUT PLATE
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H010-kd
PISTON
1
8
R638-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H008-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
7012-H013-kd
CYL ROD (1.5" Dia)
7040-H012-kd Seal kit contains items w/*
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H012N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
117
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060760-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 16”
Collapsed: 29.50”
Extended: 44.50”
Seal Kit: 7040-H023-kd
Item #
Part #
Description
Qty.
1
7025-H027-kd
Tube
1
2
RF03051-00160-kd
Locknut, Hex
1
3
R609-kd
Shoulder Plate
2
4
R593-1025-kd*
Primary Seal (cast iron)
2
5
R295-157-kd*
"O" Ring Seal (Piston)
1
6
R594-157-kd*
Loaded Teflon Ring
1
7
7006-H011-kd
Piston
1
8
R610-kd
Shoulder Plate
1
9
R295-350-kd*
“O” Ring Seal, Head
1
10
R466-350-kd*
Back Up Ring
1
11
1065774-kd
Gland, Steel
1
12
R283-2000-kd*
Rod Seal
1
13
R595-2000-kd*
Rod Wiper
1
14
R295-025-kd
“O” Ring Seal
1
15
7012-H025-kd
Rod
7040-H023-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
118
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 6025145-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 14.50”
Collapsed: 33.25”
Extended: 47.75”
Seal Kit: 1023060-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part #
EC1-16-kd
1022422-kd
R593-1029-kd*
R295-253-kd*
R594-253-kd*
1022970-kd
R295-256-kd*
R466-256-kd*
1065984-kd
R283-2500-kd*
R595-2500-kd*
R295-222-kd*
EC2-16-kd
Description
TUBE WELDMENT
JAM NUT, 1 3/4"
RING (CAST IRON)
O-RING (PISTON)
TEFLON RING
PISTON (6" BORE)
O-RING (HEAD)
BACK-UP RING
HEAD (6" x 2.5")
ROD SEAL
ROD WIPER
O-RING (ROD)
SHAFT (2.5" dia)
Qty.
1
1
2
1
1
1
1
1
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
1023060N-kd seal kit contains items w/* less item 3
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
119
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H012-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 12”
Collapsed: 25.25”
Extended: 37.25”
Seal Kit: 7040-H012-kd
Item
Part #
#
1 7025-H012-kd
Description
Qty.
TUBE WELDMENT
1
2
RF03051-00142-kd
LOCK NUT, NF 1"
1
3
R608-kd
NUT PLATE
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H006-kd
PISTON
1
8
R608-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H008-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
7012-H012-kd
CYL. ROD (1.5" Dia)
1
16
7032-H012-kd
STOP TUBE
7040-H012-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H012N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
120
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H013-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 2.5”
Stroke: 25”
Collapsed: 37.75”
Extended: 62.75”
Seal Kit: 7040-H013-kd
Item #
Part #
Description
TUBE WELDMENT
Qty.
1
7025-H015-kd
1
2
RF03051-00142-kd LOCK NUT, NF 1"
1
3
R638-kd
NUT PLATE
1
4
R593-1009-kd*
SEAL (CAST IRON)
2
5
R295-137-kd*
O-RING (PISTON)
1
6
R594-137-kd*
TEFLON RING
1
7
7006-H026-kd
PISTON (2.5" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-228-kd*
O-RING (HEAD)
1
10
R466-228-kd*
BACK-UP RING
1
11
7002-H001-kd
HEAD (2.5" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
C061-3-kd
CYL. ROD (1.75" Dia)
7040-H013-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H013N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
121
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H014-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3”
Stroke: 8”
Collapsed: 20.25”
Extended: 28.25”
Seal Kit: 7040-H014-kd
Item #
Part #
Description
Qty.
1
7025-H016-kd
TUBE WELDMENT
1
2
RF03051-00142-kd LOCK NUT, NF 1"
1
3
RF05020-00180-kd WASHER
1
4
R593-1013-kd*
SEAL (CAST IRON)
2
5
R295-145-kd*
O-RING (PISTON)
1
6
R594-145-kd*
TEFLON RING
1
7
7006-H002-kd
PISTON
1
8
R638-kd
SHOULDER PLATE
1
9
R295-334-kd*
O-RING (HEAD)
1
10
R466-334-kd*
BACK-UP RING
1
11
7002-H009-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H016-kd
CYL. ROD (1.5" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H014-kd Seal kit contains items w/*
7040-H014N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
122
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H015-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3”
Stroke: 27”
Collapsed: 41.75”
Extended: 68.75”
Seal Kit: 7040-H014-kd
Item #
Part #
Description
7025-H013-kd
TUBE WELDMENT
1
RF03051-00142-kd LOCK NUT, NF 1"
2
Qty.
1
1
3
R638-kd
NUT PLATE
1
4
R593-1013-kd*
SEAL (CAST IRON)
2
5
R295-145-kd*
O-RING (PISTON)
1
6
R594-145-kd*
TEFLON RING
1
7
7006-H002-kd
PISTON (3" BORE)
1
8
7032-H004-kd
STOP TUBE
1
9
R295-334-kd*
O-RING (HEAD)
1
10
R466-334-kd*
BACK-UP RING
1
11
7002-H009-kd
HEAD (3" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500v*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H013-kd
CYL. ROD (1.5" Dia)
1
16
R638-kd
NUT PLATE
7040-H014-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H014N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
123
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H015A-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
41
Bore: 3”
Stroke: 25.5”
Collapsed: 41.75”
Extended: 67.25”
.7
Seal Kit: 7040-H014-kd
Item #
Part #
Description
TUBE WELDMENT
Qty.
1
7025-H013-kd
1
2
RF03051-00142-kd LOCK NUT, NF 1"
3
R487-kd
NUT PLATE
1
4
R593-1013-kd*
SEAL (CAST IRON)
2
5
R295-145-kd*
O-RING (PISTON)
1
6
R594-145-kd*
TEFLON RING
1
7
7006-H002-kd
PISTON (3" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-334-kd*
O-RING (HEAD)
1
10
R466-334-kd*
BACK-UP RING
1
11
7002-H009-kd
HEAD (3" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H013-kd
CYL. ROD (1.5" Dia)
1
16
7032-H004-kd
STOP TUBE
1
17
1023155-kd
STOP TUBE
7040-H014-kd Seal kit contains items w/*
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H014N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
124
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H016-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 8”
Collapsed: 20.375”
Extended: 28.375”
Seal Kit: 7040-H016-kd
Item #
Part #
Description
Qty.
1
7025-H014-kd
TUBE WELDMENT
1
2
3
4
RF03051-00142-kd
RF05020-00180-kd
R593-1017-kd*
LOCK NUT, NF 1"
NUT PLATE
SEAL (CAST IRON)
1
1
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H010-kd
PISTON (3" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H008-kd
HEAD (3" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H016-kd
CYL. ROD (1.5" Dia)
7040-H016-kd Seal kit contains items w/*
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H016N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
125
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H017A-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 27”
Collapsed: 41.75”
Extended: 68.75”
Seal Kit: 7040-H017-kd
Item #
Part #
Description
Qty.
1
7025-H022-kd
TUBE WELDMENT
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R608-1-kd
NUT PLATE
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H027-kd
PISTON (3.5" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H011-kd
HEAD (3.5" BORE)
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
7012-H021-kd
CYL. ROD (2" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H017-kd Seal kit contains items w/*
7040-H017N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
126
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H019-kd (LH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 12”
Collapsed: 25.00”
Extended: 37.00”
Seal Kit: 7040-H019-kd
Item #
Part #
Description
Qty.
1
7025-H018-kd
TUBE WELDMENT (LH)
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R609-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON (4" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD (4" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
7012-H018-kd
CYL. ROD (1 3/4”" Dia)
7040-H019-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
127
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H020-kd (RH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 12”
Collapsed: 25.00”
Extended: 37.00”
Seal Kit: 7040-H019-kd
Item #
Part #
7025-H019-kd
1
RF03051-00160-kd
2
Description
TUBE WELDMENT (RH)
Qty.
1
LOCK NUT, NF 1.25"
1
3
R609-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON (4" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD (4" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
7012-H018-kd
CYL. ROD (1.75" Dia)
7040-H019-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
128
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H021-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 16”
Collapsed: 29.00”
Extended: 45.00”
Seal Kit: 7040-H019-kd
Item #
1
Part #
7025-H017-kd***
Description
TUBE WELDMENT
Qty.
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R609-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON (4" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD (4" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
7012-H017-kd****
CYL. ROD (1.75" Dia)
7040-H019-kd Seal kit contains items w/*
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H019N-kd seal kit contains items w/* less item 4
*** for 7001-H021SPCL use part number 7025-H029 for
tube weldment
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
129
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H022-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 16”
Collapsed: 26.25”
Extended: 42.25”
Seal Kit: 7040-H022-kd
Item #
Part #
Description
Qty.
1
7025-H020-kd
TUBE WELDMENT
1
2
RF03051-00142-kd
LOCK NUT, NF 1"
1
3
R608-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H009-kd
PISTON
1
8
R608-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H010-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-214-kd*
O-RING SEAL (ROD)
1
15
7012-H019-kd
CYL. ROD (1.5" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H022-kd Seal kit contains items w/*
7040-H022N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
130
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H023-kd (RH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 12”
Collapsed: 25.50”
Extended: 37.50”
Seal Kit: 7040-H023-kd
Item #
Part #
Description
Qty.
1
7025-H023-kd
TUBE WELDMENT (RH)
1
2
RF03051-00164-kd LOCK NUT, NF 1 3/8"
1
3
R610-kd
NUT PLATE
1
4
R593-1025-kd*
SEAL (CAST IRON)
2
5
R295-157-kd*
O-RING (PISTON)
1
6
R594-157-kd*
TEFLON RING
1
7
7006-H011-kd
PISTON (5" BORE)
1
8
R610-kd
SHOULDER PLATE
1
9
R295-350-kd*
O-RING (HEAD)
1
10
R466-350-kd*
BACK-UP RING
1
11
7002-H012-kd
HEAD (5" BORE)
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-025-kd*
O-RING SEAL (ROD)
1
15
7012-H022-kd
CYL. ROD (2" Dia)
7040-H023-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
131
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H024-kd (LH)
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 12”
Collapsed: 25.50”
Extended: 37.50”
Seal Kit: 7040-H023-kd
Item #
Part #
Description
Qty.
1
7025-H024-kd
TUBE WELDMENT (LH)
1
2
RF03051-00164-kd
LOCK NUT, NF 1 3/8"
1
3
R610-kd
NUT PLATE
1
4
R593-1025-kd*
SEAL (CAST IRON)
2
5
R295-157-kd*
O-RING (PISTON)
1
6
R594-157-kd*
TEFLON RING
1
7
7006-H011-kd
PISTON (5" BORE)
1
8
R610-kd
SHOULDER PLATE
1
9
R295-350-kd*
O-RING (HEAD)
1
10
R466-350-kd*
BACK-UP RING
1
11
7002-H012-kd
HEAD (5" BORE)
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-025-kd*
O-RING SEAL (ROD)
1
15
7012-H022-kd
CYL. ROD (2" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H023-kd Seal kit contains items w/*
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
132
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H026-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 2.5”
Stroke: 25”
Collapsed: 37.75”
Extended: 62.75”
Seal Kit: 7040-H026-kd
Item #
Part #
Description
Qty.
1
7025-H015-kd
TUBE WELDMENT
1
2
RF03051-00142-kd LOCK NUT, NF 1"
1
3
R638-kd
NUT PLATE
1
4
R593-1009-kd*
SEAL (CAST IRON)
2
5
R295-137-kd*
O-RING (PISTON)
1
6
R594-137-kd*
TEFLON RING
1
7
7006-H026-kd
PISTON (2.5" BORE)
1
8
R638-kd
SHOULDER PLATE
1
9
R295-228-kd*
O-RING (HEAD)
1
10
R466-228-kd*
BACK-UP RING
1
11
7002-H001-kd
HEAD (2.5" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
7012-H023-kd
CYL. ROD (1.75" Dia)
7040-H026-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H026N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
133
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H028-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 5”
Stroke: 16”
Collapsed: 29.50”
Extended: 45.50”
Seal Kit: 7040-H023-kd
Item #
Part #
Description
Qty.
1
7025-H027-kd
TUBE WELDMENT
1
2
RF03051-00164-kd
LOCK NUT, NF 1.375"
1
3
R610-kd
NUT PLATE
1
4
R593-1025-kd*
SEAL (CAST IRON)
2
5
R295-157-kd*
O-RING (PISTON)
1
6
R594-157-kd*
TEFLON RING
1
7
7006-H011-kd
PISTON (5" BORE)
1
8
R610-kd
SHOULDER PLATE
1
9
R295-350-kd*
O-RING (HEAD)
1
10
R466-350-kd*
BACK-UP RING
1
11
1065774-kd
HEAD (5" BORE)
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-025-kd*
O-RING SEAL (ROD)
1
15
7012-H025HD-kd
CYL. ROD (2" Dia)
1
Note: An option for some model
HMC (Harvey) cylinders can have
1.43” ID ends. This must be
specified when placing an order.
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H023-kd Seal kit contains items w/*
7040-H023N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
134
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H029-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 8”
Collapsed: 19.875”
Extended: 27.875”
Seal Kit: 7040-H016-kd
Item #
Part #
Description
Qty.
1
7025-H028-kd
TUBE WELDMENT
1
2
RF03051-00142-kd
LOCK NUT, NF 1"
1
3
R487-kd
NUT PLATE
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H010-kd
PISTON
1
8
R638-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H008-kd
HEAD
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
7012-H016-kd
CYL. ROD (1.5" Dia)
7040-H016-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H016N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
135
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H030-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 12”
Collapsed: 25.00”
Extended: 37.00”
Seal Kit: 7040-H019-kd
Item #
Part #
Description
Qty.
1
7025-H029-kd
TUBE WELDMENT
1
2
RF03051-00160-kd
LOCK NUT, NF 1.25"
1
3
R609-kd
NUT PLATE
1
4
R593-1021-kd*
SEAL (CAST IRON)
2
5
R295-153-kd*
O-RING (PISTON)
1
6
R594-153-kd*
TEFLON RING
1
7
7006-H004-kd
PISTON (4" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-342-kd*
O-RING (HEAD)
1
10
R466-342-kd*
BACK-UP RING
1
11
7002-H007-kd
HEAD (4" BORE)
1
12
R283-1750-kd*
ROD SEAL
1
13
R595-1750-kd*
ROD WIPER
1
14
R295-021-kd*
O-RING SEAL (ROD)
1
15
7012-H018-kd
CYL. ROD (1.75" Dia)
7040-H019-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H019N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
136
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 7001-H036-kd
PN# 7001-H037-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
*Replaced by 1022953/979-kd
Bore: 5”
Stroke: 12”
Collapsed: 25.50”
Extended: 37.50”
Seal Kit: 1020306-kd
Item #
Part #
Description
Qty.
1
1022965-kd
TUBE WELDMENT( LH)
1
or
1022978-kd
TUBE WELDMENT (RH)
1
2
RF03051-00170-kd LOCK NUT, NF 1.5"
1
3
7029-H004-kd
NUT PLATE
1
4
R593-1029-kd*
SEAL (CAST IRON)
2
5
R295-253-kd*
O-RING (PISTON)
1
6
R594-253-kd*
TEFLON RING
1
7
7006-H028-kd
PISTON
1
8
7029-H004-kd
NUT PLATE
1
9
R295-256-kd*
O-RING (HEAD)
1
10
R466-256-kd*
BACK-UP RING
1
11
7002-H013-kd
HEAD
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-222-kd*
O-RING
1
15
7012-H030-kd
CYL. ROD (2" Dia)
1020306-kd Seal kit contains items w/*
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
1020306N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
137
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# BC-4-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 4”
Stroke: 27”
Collapsed: 41.75”
Extended: 68.75”
Seal Kit: 7040-H019-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part #
Description
BC1-4-kd
CYL. TUBE (4” BORE)
BC2-kd
JAM NUT
BC3-4-kd
NUT PLATE
BC4-4-kd* PRIMARY SEAL
BC5-4-kd* O-RING SEAL FOR PISTON
BC6-4-kd* TEFLON RING
BC7-4-kd
PISTON (4” BORE)
BC8-4-kd
SHOULDER PLATE
BC9-4-kd* O-RING SEAL FOR HEAD
BC10-4-kd* BACK-UP RING
BC11-4-kd CYL. HEAD (4” BORE)
BC12-kd*
ROD SEAL
BC13-kd*
ROD WIPER
BC14-kd*
O-RING SEAL FOR ROD
BC15-kd
CYL. ROD
BC18-4-kd Seal kit contains items w/*
Qty
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
BC18-4N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
138
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# DC3.5-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 3.5”
Stroke: 27”
Collapsed: 41.75”
Extended: 68.75”
Seal Kit: 7040-H017-kd
Item
Part #
Description
TUBE WELDMENT
Qty.
1
DC3.5-1-kd
1
2
RF03051-00160-kd LOCK NUT, NF 1.25"
1
3
R608-1-kd
NUT PLATE
1
4
R593-1017-kd*
SEAL (CAST IRON)
2
5
R295-151-kd*
O-RING (PISTON)
1
6
R594-151-kd*
TEFLON RING
1
7
7006-H027-kd
PISTON (3.5" BORE)
1
8
R609-kd
SHOULDER PLATE
1
9
R295-338-kd*
O-RING (HEAD)
1
10
R466-338-kd*
BACK-UP RING
1
11
7002-H011-kd
HEAD (3.5" BORE)
1
12
R283-2000-kd*
ROD SEAL
1
13
R595-2000-kd*
ROD WIPER
1
14
R295-024-kd*
O-RING SEAL (ROD)
1
15
DC3.5-2-kd
CYL. ROD (2" Dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
7040-H017-kd Seal kit contains items w/*
7040-H017N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
139
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# EC-17.50-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 17.50”
Collapsed: 32.50”
Extended: 50.00”
Seal Kit: 1023060-kd
Item
Part #
Description
Qty.
1
1060371-02-kd
TUBE WELDMENT
1
2
1022422-kd
JAM NUT, 1 3/4"
1
3
R593-1029-kd*
RING (CAST IRON)
2
4
R295-253-kd*
O-RING (PISTON)
1
5
R594-253-kd*
TEFLON RING
1
6
1022970-kd
PISTON (6" BORE)
1
7
R295-256-kd*
O-RING (HEAD)
1
8
R466-256-kd*
BACK-UP RING
1
9
1065984-kd
HEAD (6" x 2.5")
1
10 R283-2500-kd*
ROD SEAL
1
11 R595-2500-kd*
ROD WIPER
1
12 R295-222-kd*
O-RING (ROD)
1
13 1022960-02-kd
SHAFT (2.5" dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
1023060N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
140
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# EC-20.75-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
Description:
Bore: 6”
Stroke: 20.75”
Collapsed: 36.00”
Extended: 56.75”
Seal Kit: 1023060-kd
Item
Part #
Description
Qty.
1
EC-20.75-1-kd
TUBE WELDMENT
1
2
1022422-kd
JAM NUT, 1 3/4"
1
3
R593-1029-kd*
RING (CAST IRON)
2
4
R295-253-kd*
O-RING (PISTON)
1
5
R594-253-kd*
TEFLON RING
1
6
1022970-kd
PISTON (6" BORE)
1
7
R295-256-kd*
O-RING (HEAD)
1
8
R466-256-kd*
BACK-UP RING
1
9
1065984-kd
HEAD (6" x 2.5")
1
10 R283-2500-kd*
ROD SEAL
1
11 R595-2500-kd*
ROD WIPER
1
12 R295-222-kd*
O-RING (ROD)
1
13 EC-20.75-2-kd
SHAFT (2.5" dia)
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
1023060N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
141
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MG00-906-kd
A
Warning
B
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
C
D
E
F
D
G
I
Description:
H
J
K
Bore: 6”
Stroke: 15”
Collapsed: 32.50”
Extended: 47.50
L
M
N
Seal Kit: MG00906SK-kd
O
Item
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Part #
MG00906ZA-kd
1022422-kd
1022958-kd
R593-1029-kd*
R295-253-kd*
R594-253-kd*
1022970-kd
1022958-kd
R295-256-kd*
R466-256-kd*
1065984-kd
R283-2500-kd*
R595-2500-kd*
R295-222-kd*
MG00906ZO-kd
Description
Tube
Nut, 1.75”
Washer
Seal
O-Ring
Teflon Ring
Piston, 6”
Shoulder Plate
O-Ring Seal
Secondary Ring
Head, 6”
Rod Seal, 2.5”
Rod Wiper, 2.5”
O-Ring
Rod
Qty
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
142
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MG00-907-kd
A
Warning
B
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
C
D
E
F
D
G
I
Description:
H
J
K
Bore: 6”
Stroke: n/a
Collapsed: n/a
Extended: n/a
L
M
N
Seal Kit: MG00907SK-kd
O
Item
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Part #
MG00907ZA-kd
1022422-kd
1022958-kd
R593-1029-kd*
R295-253-kd*
R594-253-kd*
1022970-kd
1022958-kd
R295-256-kd*
R466-256-kd*
1065984-kd
R283-2500-kd*
R595-2500-kd*
R295-222-kd*
MG00907ZO-kd
Description
Tube
Nut, 1.75”
Washer
Seal
O-Ring
Teflon Ring
Piston, 6”
Shoulder Plate
O-Ring Seal
Secondary Ring
Head, 6”
Rod Seal, 2.5”
Rod Wiper, 2.5”
O-Ring
Rod
Qty
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1023060-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
143
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MS00-044ZZ-kd
Warning
Always replace the locking nut
after removing the original
locking nut from the cylinder shaft
during repair. This will eliminate
the chance of the old locking nut
loosening during cylinder
operation and damaging the
whole cylinder.
41
.
70 75” C
.75
” E OLL
XT AP
EN SE
DE D
D
Description:
Bore: 3”
Stroke: 29”
Collapsed: 41.75”
Extended: 70.75”
Seal Kit: 7040-H014-kd
Item #
Part #
Description
7025-H013-kd
TUBE WELDMENT
1
RF03051-00142-kd LOCK NUT, NF 1"
2
Qty.
1
1
3
R638-kd
NUT PLATE
1
4
R593-1013-kd*
SEAL (CAST IRON)
2
5
R295-145-kd*
O-RING (PISTON)
1
6
R594-145-kd*
TEFLON RING
1
7
7006-H002-kd
PISTON (3" BORE)
1
8
N/A
N/A
9
R295-334-kd*
O-RING (HEAD)
1
10
R466-334-kd*
BACK-UP RING
1
11
7002-H009-kd
HEAD (3" BORE)
1
12
R283-1500-kd*
ROD SEAL
1
13
R595-1500v*
ROD WIPER
1
14
R295-020-kd*
O-RING SEAL (ROD)
1
15
7012-H013-kd
CYL. ROD (1.5" Dia)
1
16
R638-kd
NUT PLATE
7040-H014-kd Seal kit contains items w/*
N/A
All Cylinders manufactured by
K D Sales are assembled and
tested in our facilities to ensure
the quality of our product.
1
7040-H014N-kd seal kit contains items w/* less item 4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
144
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 3
Hubs &
Hub
Components
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
145
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Hub Repair Kits
R120-kd Hub Kit
R130-kd Hub Kit (for 2.25” diam. axle)
R660-kd Hub Kit (for 2.5” diam. Axle)
R700-kd Hub kit
102000-kd Hub Kit
All hub kits include the items necessary to
rebuild the “guts” of a hub assembly. These
hub repair kits do not include axles, studs,
nuts or retainer rings that may be essential in
rebuilding the damaged hub.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
146
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# BO25-5-kd AXLE CLAMP WELD-ON & B025-3-kd AXLE CLAMP
*REQUIRES
RF02022-00840-kd 5/8 X 3 BOLT
RF05031-00120-kd 5/8 WA
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
147
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023845-kd AXLE CLAMP
Item
1
2
3
4
Part #
1023845-kd
RF01022-00265-kd
1054802-kd
1023812-kd
Description
AXLE CLAMP
1” x 7” BOLT
SQUARE NUT
SHIM
Qty
1
2
2
1
NOTE: ITEMS 2, 3 & 4 ARE NOT SHOWN
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
148
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1020068-kd*
Caution
*PN# 1020068-kd does not
include: Item # 9,10,11,13
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
ITEM
PART #
DESCRIPTION
QTY.
1
1020529-kd *
HUB SEAL
1
2
1020304-kd *
INNER CONE
1
3
1020301-kd *
INNER CUP
1
4
1020129-kd
HUB (W/ CUPS)
1
5
1020534-kd
LUG BOLT (5/8”)
8
6
1020533-kd
LUG NUT (5/8”)
8
7
1020527-kd *
OUTER CUP
1
8
1020305-kd *
OUTER CONE
1
9
1020531-kd
WASHER
1
10
1020530-kd
SLOTTED NUT
1
11
1020532-kd
C. PIN
1
12
1020528-kd *
DUST CAP
1
13
1021161-kd
SPINDLE
1
102000-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
149
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1020402-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
R140-1-kd*
Retainer (2pc)
1
2
R139-kd*
Hub seal
2
3
A498-kd*
Ring
2
4
R295-035-kd* O-ring
2
5
R134-kd*
Bearing cone
2
6
R135-kd*
Bearing cup
2
7
1020404-kd
Axle (2.25” x 37.5”)
1
8
1020403-kd
Hub Weldment
1
9
R469-kd
Lug bolt (5/8”)
16
10
R654-kd
Lug nut (5/8”)
16
11
R137-kd*
Lock washer
1
12
R136-kd*
Lock nut
1
13
1058757-kd
Grease relief
ref
R130-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
150
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1021144-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
R140-1-kd*
Retainer (2pc)
1
2
R139-kd*
Hub seal
2
3
A498-kd*
Ring
2
4
R295-035-kd*
O-ring
2
5
R134-kd*
Bearing cone
2
6
R135-kd*
Bearing cup
2
7
A230-4-kd
Axle (33.25”x 2.25)
1
8
1021146-kd
Hub Weldment
1
9
R657-kd
Lug bolt (3/4”)
16
10
R249-kd
Lug nut (3/4”)
16
11
R137-kd*
Lock washer
1
12
R136-kd*
Lock nut
1
13
1058757-kd
Grease relief
ref
R130-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
151
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1022368-kd*
Caution
*PN# 1022368-kd does not
include: Items# 8,9,11,12
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
R125-kd*
Hub Seal
1
2
R121-kd*
Inner cone
1
3
R122-kd*
Inner cup
1
4
R126-kd
Hub
1
5
R153-kd
Lug bolt
6
6
R124-kd*
Outer cup
1
7
R123-kd*
Outer bearing
1
8
R608-1-kd
Washer (7/8”)
1
9
1020530-kd
Slotted nut (1”)
1
10
R127-kd*
Hub cap
1
11
B875-kd
Spindle (weld-on)
1
12
RF06020-0020-kd
Cotter pin
1
R120-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
152
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023846-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R798-450-kd
Seal ring
2
3
R663-kd*
Hub seal
2
4
R664-1-kd*
Axle collar
2
5
R662-kd*
Bearing cone
2
6
R661-kd*
Bearing cup
2
7
1023895-kd
Axle (25” x2.5”)
1
8
1023898-kd
Hub Weldment
1
9
1058757-kd
Grease relief
ref
10
R657-kd
Lug bolt (3/4”)
10
11
1020954-kd
Lug nut (3/4”)
10
12
R666-kd*
Lock washer
1
13
R665-kd*
Lock nut
1
14
1020837-kd
Grease fitting
ref
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
153
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1043343-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Uses Super
Single Tire
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R663-kd*
Hub seal
2
3
R664-1-kd*
Ring
2
4
R295-037-kd*
O-ring
2
5
R662-kd*
Bearing cone
2
6
R661-kd*
Bearing cup
2
7
1043346-kd
Axle (45.5” x 2.5”)
1
8
1059144-kd
Hub Weldment
1
9
R657-kd
Lug bolt (3/4”)
20
10
1020954-kd
Lug nut (3/4”) Flanged
20
or
R249-kd
Lug nut (3/4”) Beveled
20
11
R666-kd*
Lock washer
1
12
R665-kd*
Lock nut
1
13
1058757-kd
Grease relief
ref
14
R798-450-kd
Retainer ring
2
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
154
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060701-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R798-450-kd
Retainer ring
2
3
R663-kd*
Hub seal
2
4
R664-1-kd*
Axle collar
2
5
R662-kd*
Bearing cone
2
6
R661-kd*
Bearing cup
2
7
1060701-11-kd
Axle (19”x2.5”)
1
8
1060701-21-kd
Hub Weldment
1
9
1058757-kd
Grease relief
ref
10
R657-kd
Lug bolt (3/4”)
8
11
R249-kd
Lug nut (3/4”)
8
12
R666-kd*
Lock washer
1
13
R665-kd*
Lock nut
1
14
1020837-kd
Grease fitting
ref
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
155
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1061110-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
ITEM
PART#
DESCRIPTION
QTY.
1
B955-kd*
SPLIT RING(2pc)
1
2
R798-450-kd
RETAINER RING
2
3
R663-kd*
SEAL
2
4
R664-1-kd*
AXLE COLLAR
2
5
R662-kd*
BEARING CONE
2
6
R661-kd*
BEARING CUP
2
7
1023895-kd
AXLE (2.5” x 25”)
1
8
1061111-kd
HUB WELDMENT
1
9
1058757-kd
GREASE RELIEF
OPT.
10
1062868-kd
LUG BOLT (1.125)
10
11
1062860-kd
LUG NUT (1.125)
10
12
R666-kd*
LOCK WASHER
1
13
R665-kd*
LOCK NUT
1
14
1020837-kd
GREASE FITTING
2
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
156
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1062740-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R798-500-kd
Seal ring
2
3
1062746-kd*
Hub seal
2
4
R664-1-kd*
Axle collar
2
5
1062745-kd*
Bearing cone
2
6
1062744-kd*
Bearing cup
2
7
1062748-kd
Axle (28” x2.5”)
1
8
1062739-kd
Hub Weldment
1
9
1058757-kd
Grease relief
ref
10
1062868-kd
Lug bolt (1 1/8”)
10
11
1062860-kd
Lug nut (1 1/8”)
10
12
R666-kd*
Lock washer
1
13
R665-kd*
Lock nut
1
R700-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
157
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1062750-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R798-500-kd
Seal ring
2
3
1062746-kd*
Hub seal
2
4
R664-1-kd*
Axle collar
2
5
1062745-kd*
Bearing cone
2
6
1062744-kd*
Bearing cup
2
7
1023895-kd
Axle (25” x2.5”)
1
8
1062739-kd
Hub Weldment
1
9
1058757-kd
Grease relief
ref
10
1062868-kd
Lug bolt (1 1/8”)
10
11
1062860-kd
Lug nut (1 1/8”)
10
12
R666-kd*
Lock washer
1
13
R665-kd*
Lock nut
1
R700-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
158
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# A229-501-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
R140-1-kd*
Retainer (2pc)
1
2
R139-kd*
Hub seal
2
3
A498-kd*
Ring
2
4
R295-035-kd*
O-ring
2
5
R134-kd*
Bearing cone
2
6
R135-kd*
Bearing cup
2
7
A230-4 -kd
Axle (33.25x2.25”)
1
8
B081-501-kd
Hub Weldment
1
9
R469-kd
Lug bolt (5/8”)
16
10
R654-kd
Lug nut (5/8”)
16
11
R137-kd*
Lock washer
1
12
R136-kd*
Lock nut
1
R130-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
159
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# A511-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
ITEM
PART#
PN# A511 does not include:
Items 8,9,11,12
DESCRIPTION
QTY.
1
R125-kd*
Hub Seal
1
2
R121-kd*
Inner Cone
1
3
R122-kd*
Inner Cup
1
4
R126-kd
Hub w/ cups
1
5
R153-kd*
Lug Bolt
6
6
R124-kd*
Outer cup
1
7
R123-kd*
Outer cone
1
8
R608-1-kd
Washer
1
9
Rf03024-00800-kd
Slotted nut
1
10
R127-kd*
Hub cap
1
11
A067-kd
Spindle (weld-on)
1
12
Rf06020-00020-kd
Cotter pin
1
R120-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
160
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B951-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer
1
2
R663-kd*
Hub seal
2
3
R664-1-kd*
Ring
2
4
R295-037-kd* O-ring
2
5
R662-kd*
Bearing cone
2
6
R661-kd*
Bearing cup
2
7
B953-kd
Axle (17” x 2.5”)
1
8
B951-1-kd
Hub Weldment
1
9
R657-kd
Lug bolt (3/4”)
16
10
R249-kd
Lug nut (3/4”)
16
11
R666-kd*
Lock washer
1
12
R665-kd*
Lock nut
1
13
R798-450-kd Snap Ring
2
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
161
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B952-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
Item
Part #
Description
Qty
1
B955-kd*
Retainer (2pc)
1
2
R663-kd*
Hub seal
2
3
R664-1-kd*
Ring
2
4
R295-037-kd*
O-ring
2
5
R662-kd*
Bearing cone
2
6
R661-kd*
Bearing cup
2
7
B954-kd
Axle (33.25” x 2.5”)
1
8
B952-1-kd
Hub Weldment
1
9
R657-kd
Lug bolt (3/4”)
16
10
R249-kd
Lug nut (3/4”)
16
11
R666-kd*
Lock washer
1
12
R665-kd*
Lock nut
1
13
1058757-kd
Grease relief
ref
14
R798-450-kd
Retainer ring
2
R660-kd Seal kit contains items w/*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
162
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# CH-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part #
CH-kd
CH1-kd
CH2-kd
CH3-kd
CH4-kd
CH5-kd
CH6-kd
CH7-kd
CH8-kd
CH9-kd
CH10-kd
CH11-kd
CH12-kd
CH13-kd
Description
COMPLETE WHEEL HUB ASSY
LOCK NUT
LOCK WASHER
OIL/GREASE SEAL
RETAINER RING
BEARING (CONE)
BEARING (CUP)
GREASE FITTING
NUT, 3/4"
BOLT
HUB HOUSING
AXLE
GREASE RELIEF FITTING
FLAT WASHER
Qty
1
4
2
2
2
2
2
1
20
20
1
1
1
20
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
163
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# CSH4-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part #
CSH4-kd
WH1-kd
WH2-kd
WH3-kd
WH4-kd
WH5-kd
WH6-kd
WH7-kd
1062860-kd
1062868-kd
CSH6-kd
WH13-kd
CS2-kd
R798-500-kd
Description
COMPLETE WHEEL HUB ASSY
LOCK NUT
LOCK WASHER
OIL/GREASE SEAL
RETAINER RING
BEARING (CONE)
BEARING (CUP)
GREASE FITTING
NUT, 1 1/8”
BOLT, 1 1/8”
HUB HOUSING
GREASE RELIEF FITTING
AXLE
SNAP RING
Qty
1
2
1
2
2
2
2
1
10
10
1
1
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
164
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MG00904-8K-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
* The 8K hub assembly should
be replaced by MG00904-10K
option.
Item
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Part #
MG00904ZA-kd
MG00904ZB-kd
MG00904ZC-kd
MG00904ZD-kd
MG00904ZE-kd
MG00904ZF-kd
MG00904ZG-kd
MG00904ZH-kd
MG00904ZI-kd
MG00904ZJ-kd
MG00904ZK-kd
MG00904ZL-kd
MG00904ZM-kd
MG00904ZN-kd
MG00904ZO-kd
Description
Spindle, 8K
Seal
Inner Cone
Inner Cup
Lug Bolt, .625”
Hub Weldment, 8K
Lug Nut, .625”
Outer Cup
Outer Cone
Spindle Washer
Spindle Nut
Cotter Pin
Hub Cap
Wheel
Tire
Qty
4
4
4
4
32
4
32
4
4
4
4
4
1
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
165
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MG00904-10K-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
* The 10K hub assembly should
be replaced by WTHA-kd.
Item
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Part #
MG00904AA-kd
MG00904AB-kd
MG00904AC-kd
MG00904AD-kd
MG00904AE-kd
MG00904AF-kd
MG00904AG-kd
MG00904AH-kd
MG00904AI-kd
MG00904AJ-kd
MG00904AK-kd
MG00904AL-kd
MG00904AM-kd
MG00904AN-kd
MG00904AO-kd
Description
Spindle, 10K
Seal
Inner Cone
Inner Cup
Lug Bolt, .750”
Hub Weldment, 10K
Lug Nut, .750”
Outer Cup
Outer Cone
Spindle Washer
Spindle Nut
Cotter Pin
Hub Cap
Wheel
Tire
Qty
4
4
4
4
32
4
32
4
4
4
4
4
1
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
166
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# MS00-038-kd
Caution
Grease hubs every 250 hours.
When rebuilding a hub assembly,
notice hub repair kits do not
include snap rings that may be
required in rebuilding your hub.
ITEM
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
PART #
MS00038ZA-kd
1020529-kd
1020304-kd
1020301-kd
R469-kd
1020129-kd
R654-kd
1020527-kd
1020305-kd
1020531-kd
1020530-kd
1020532-kd
1020528-kd
R619-kd
R631-kd
DESCRIPTION
Spindle
Seal
Inner Cone
Inner Cup
Lug Bolt (5/8”)
Hub
Lug Nut (5/8”)
Outer Cup
Outer Cone
Spindle Washer
Spindle Nut
Cotter Pin
Hub Cap
Wheel
Tire
QTY
4
4
4
4
32
32
4
4
4
4
4
4
1
4
4
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
167
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# WH-kd
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part #
WH1-kd
WH2-kd
WH3-kd
WH4-kd
WH5-kd
WH6-kd
WH7-kd
WH8-kd
WH10-kd
WH11-M-kd
WH13-kd
WH15-M-kd
WH16-kd
Description
LOCK NUT
LOCK WASHER
OIL/GREASE SEAL
RETAINER RING
BEARING
BEARING
GREASE FITTING
NUT, 3/4"
BOLT
HUB HOUSING
GREASE RELIEF FITTING
AXLE
SNAP RING
Qty
2
1
2
2
2
2
1
8
8
1
1
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
168
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# WTHA-kd
Item
Part #
Description
Qty
1
WTHA-1-kd
Axle
4
2
R661-kd
Cup
8
3
R662-kd
Bearing
8
4
R295-035-kd
O-Ring
8
5
R664-1-kd
Collar
8
6
R663-kd
Hub Seal
8
7
HA-2A-kd
Hub Weldment
4
8
R666-kd
Lock Washer
4
9
R665-kd
Lock Nut
4
10 R657-kd
Lug Bolt
32
11 WH9-kd
Lug Nut
32
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
169
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 4
Yoke & Hitch
Assemblies
&
Components
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
170
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
HITCH PINS (OPTIONS) (MOST POPULAR SIZES LISTED)
HITCH PINS (1.5" dia.)
Item
1
2
3
4
5
6
7
Part #
A916-3-kd
B185-kd
B186-kd
B187-kd
B580-kd
B581-kd
B1060656-kd
Description
PIN (3.5" LENGTH)
PIN (12" LENGTH)
PIN (13.5" LENGTH)
PIN (17" LENGTH)
PIN (15.5" LENGTH)
PIN (15.5" LENGTH)
PIN (6" LENGTH)
Qty
1
1
1
1
1
1
1
HITCH PINS (2" dia.)
Item
Part #
Description
Qty
1
1063214-kd
PIN ONLY (19" LENGTH)
1
2
1063284-kd
PIN ASS’Y (19" LENGTH)
1
3
H34-kd
PIN ONLY (12” LENGTH)
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
171
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B575-B-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
ITEM
1
2
3
4
5
6
7
8
9
PART #
B943-kd
B576-kd
B439-8-kd
U17220-kd
M000-018-kd
B439-10-kd
RF06020-00060-kd
RF03024-00200-kd
B439-9-kd
DESCRIPTION
YOKE FRONT(A)
YOKE REAR (C )
BUSHING
BUSHING
YOKE BOLT
WASHER
COTTER PIN
SLOTTED NUT (1.5")
WASHER
QTY
1
1
4
2
1
1
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
172
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B944-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
B944-kd uses 1.5” pin
Note: B944-kd is
replaced by B944-B-kd
Item
Part #
Description
Qty
1
B943-kd
Yoke Front (A)
1
2
B944-1-kd
Yoke Rear (C)
1
3
B439-8-kd
Bushing
4
4
B439-10-kd
Thrust Washer
1
5
U17220-kd
Bushing
2
6
B188-3-kd
Pin (Weld-in)
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
173
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B944-B-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
B944-B-kd uses 1.5” pin
Item
Part #
Description
Qty
1
B943-kd
Yoke Front (A)
1
2
B944-1-kd
Yoke Rear (C)
1
3
B439-8-kd
Bushing
4
4
U17220-kd
Bushing
2
5
M000-018-kd
Bolt (1.75"dia.)
1
6
B439-10-kd
Thrust washer
1
7
RF06020-00060-kd Cotter pin
1
8
RF03024-00200-kd Slotted nut (1.5")
1
9
B439-9-kd
1
Washer
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
174
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# CSYH-1-kd
Caution
SEE NEXT PAGE FOR PARTS LISTING
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
CSYH-1-kd INCLUDES ASSEMBLY ITEMS
1, 11 & 15.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
175
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# CSYH-1-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item #
1
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part #
1063527-02-kd
1063280-kd
H1-kd
1063214-kd
H33-kd
H34-kd
H36-kd
H38-kd
H37-kd
1063177-kd
1063144-kd
1063146-kd
H32-kd
1063143 -kd
H31-kd
HA-1-kd
REF
REF
REF
CSYH-1-kd INCLUDES ASSEMBLY ITEMS 1, 11 & 15.
Description
YOKE ASSEMBLY
REAR YOKE
FRONT YOKE, 2” DRAWBAR PIN
VERTICAL HITCH PIN (1063284-kd, Pin Assy) (2”)
HORIZONTAL HITCH PIN (2”)
DRAW BAR HITCH PIN (2”)
2" CASTLE NUT
2" FLAT WASHER
COTTER PIN
REAR YOKE BUSHING
REAR YOKE BUSHING
THRUST WASHER
FRONT YOKE BUSHING
HITCH PIVOT BUSHING
HITCH ADAPTER PLATE
HITCH ASSEMBLY
BOLT, 1.125”, GR. 8
LOCK WASHER, 1.125”
NUT, 1.125”
Qty
1
1
1
1
1
1
3
3
3
2
2
4
4
2
1
1
7
7
7
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
176
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# D650-kd*
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
D650-kd uses 1.5” pin, B187-kd
*Items 5,6 & 7 are not
included in PN# D650-kd
Item
Part #
Description
Qty
1
D650-kd
Hitch Assembly
1
2
C921-kd
Bushing (flanged)
1
3
C920-kd
Bushing
1
4
1020837-kd
Grease fitting
1
5
RF01022-00241-kd
1"x 5.5" bolt gr8
5
6
RF05031-00130-kd
1" lock washer
5
7
RF03021-00240-kd
1" nut
5
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
177
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# D650-02-kd*
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
D650-02--kd uses 1.5” pin, B187-kd
*Item 4 may be replaced by Item 2
*Items 5,6 & 7 are not
included in PN# D650-02-kd
Item
Part #
Description
Qty
1
D650-02-kd
Hitch Assembly
1
2
C921-kd
Bushing (flanged)
1
3
1020837-kd
Grease fitting
1
4
C920-kd
Bushing
1
5
RF01022-00241-kd
1" x 5.5" bolt gr8
7
6
RF05031-00130-kd
1" lock washer
7
7
RF03021-00240-kd
1" nut
7
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
178
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# D840-kd*
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
D840-kd uses 1.5” pin, B187-kd
*D840-kd HITCH
INCLUDES:
ITEMS #1,2,3 only
Item #
1
2
3
4
5
6
Part #
1020837-kd
B507-kd
D840-kd
RF01022-00241-kd
RF05031-00130-kd
RF03021-00240-kd
Description
Grease fitting
Bushing
Hitch ASS'Y.
1"x5.5" bolt gr8
1" lock washer
1" nut
Qty
1
2
1
5
5
5
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
179
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# HA-1-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item
Part #
Description
Qty
1
HA1-kd
HITCH ASSEMBLY
1
2
1063143-kd
HITCH PIVOT BUSHING
2
3
H31-kd
HITCH ADAPTER PLATE
1
4
HW1-kd
BOLT, 1.125”, GR 8
7
5
HW2-kd
LOCK WASHER, 1.125”
7
6
HW3-kd
NUT, 1.125”
7
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
180
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# XP0309-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
* USES B187-kd PIN
Item
Part #
Description
Qty
1
H8-kd
HITCH TOP BUSHING
1
2
H9-kd
HITCH ADAPER PLATE
1
3
H10-kd
HITCH PIN MECH. TUBING
1
4
3B-8489-kd
GREASE FITTING
2
5
H11-kd
HITCH BOTTOM BUSHING
1
6
H28-kd
HITCH WEAR PLATE
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
181
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1061093-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
1061093-kd uses 1.5” pin
Item #
1
2
3
4
5
6
7
&
Part #
1061095-kd
1061094-kd
B439-8-kd
1061098-kd
1061096-kd
1061126-kd
1061102-kd
YB1.75-kd
Description
YOKE PIECE FRONT (A)
YOKE PIECE REAR (C)
BUSHING *HEAT TREATED*
YOKE PIN (THREADED)
LOCK NUT (1.75")
THRUST WASHER
BUSHING *HEAT TREATED*
BUSHING *HEAT TREATED*
Qty
1
1
4
1
2
1
2
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
182
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063282-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
*1063282-kd INCLUDES
ITEMS 4, 5 & 6 only
Item
Part #
Description
HITCH PIN (2" DIAM)
Qty
1
1063214-kd
1
2
RF03024-00260-kd HEX SLOTTED NUT
1
3
RF06020-00083-kd COTTER PIN
1
4
1063143-kd
BUSHING
2
5
AL-0067K-kd
GREASE FITTING
2
6
1063688-kd
HITCH (W/ BUSHINGS)
1
7
RF01022-00241-kd BOLT
7
8
RF05031-00130-kd LOCK WASHER
7
9
RF03021-00240-kd NUT
7
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
183
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063527-kd (Center Pin Option 1)
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
**
** ITEM 3 MAY BE REPLACED
WITH YB2.0-kd FOR 2” DRAW
BAR PIN, PN#1063527-02-kd
**
Item
1
2
3
4
or
5
6
7
8
Part #
1063281-kd
1063280-kd
1063145-kd
1063212-kd
1063283-kd
1044362-kd
1063146-kd
1063144-kd
1063177-kd
Description
Qty
YOKE PIECE FRONT (A)
1
YOKE PIECE REAR ( C)
1
BUSHING (SPIRALED)(1.5" id) 2
YOKE PIN (THREADED)
1
PIN ASSEMBLY w/ NUTS
1
LOCK NUT (2")
2
THRUST WASHER
2
BUSHING *HEAT TREATED*
2
BUSHING (2" id)
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
184
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063527-kd (Center Pin Option 2)
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item
1
2
3
4
5
6
7
8
9
10
Part #
1063281-kd
1063280-kd
1063177-kd
1063144-kd
H33-kd
1063146-kd
H37-kd
H36-kd
H38-kd
1063145-kd
Description
YOKE PIECE FRONT (A)
YOKE PIECE REAR ( C)
BUSHING (2" id)
BUSHING *HEAT TREATED*
CENTER PIN (2")
THRUST WASHER
COTTER PIN
2” SLOTTED NUT
2” FLAT WASHER
BUSHING (1.5” id)
Qty
1
1
2
2
1
2
1
1
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
185
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063527-02-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
* USES H34-kd
DRAWBAR PIN, 2”
Item
1
2
3
4
5
6
7
8
9
10
Part #
H1-kd
1063280-kd
1063177-kd
1063144-kd
H33-kd
1063146-kd
H37-kd
H36-kd
H38-kd
YB2.0-kd
Description
YOKE PIECE FRONT (A)
YOKE PIECE REAR ( C)
BUSHING (2" id)
BUSHING *HEAT TREATED*
CENTER PIN (2")
THRUST WASHER
COTTER PIN
2” SLOTTED NUT
2” FLAT WASHER
BUSHING (2” id)
Qty
1
1
2
2
1
2
1
1
1
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
186
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063285-kd
Caution
SEE NEXT PAGE FOR PARTS LISTING
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
1063285-kd INCLUDES ASSEMBLY ITEMS
1, 11 & 15.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
187
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063285-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item
1063285-kd INCLUDES ASSEMBLY ITEMS 1, 11 & 15.
Part #
Description
Qty
1
1063527-kd
YOKE ASSEMBLY
1
1A
1063280-kd
REAR YOKE
1
2
1063281-kd
FRONT YOKE
1
3
1063214-kd
VERTICAL HITCH PIN (1063284-kd, Pin Assy) (2”)
1
4
H33-kd
CENTER YOKE PIN (2”)
1
5
B185-kd
DRAW BAR HITCH PIN (1.5”)
1
6
H36-kd
2" CASTLE NUT
2
7
H38-kd
2" FLAT WASHER
2
8
H37-kd
COTTER PIN
2
9
1063177-kd
REAR YOKE BUSHING
2
10
1063144-kd
REAR YOKE BUSHING
2
11
1063146-kd
THRUST WASHER
4
12
H32-kd
FRONT YOKE BUSHING
4
13
1063143 -kd
HITCH PIVOT BUSHING
2
14
Reference
HITCH ADAPTER PLATE
1
15
1063282-kd
HITCH ASSEMBLY
1
16
RF01022-00241-kd
BOLT
7
17
RF05031-00130-kd
LOCK WASHER
7
18
RF03021-00240-kd
NUT
7
19
1063145-kd
BUSHING, 1.5” id
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
188
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063285-02-kd
Caution
SEE NEXT PAGE FOR PARTS LISTING
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
1063285-02-kd INCLUDES ASSEMBLY ITEMS
1, 11 & 15.
* USES H34-kd
DRAWBAR PIN, 2”
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
189
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1063285-02-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item #
1
1A
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1063285-02-kd INCLUDES ASSEMBLY ITEMS 1, 11 & 15.
Part #
1063527-02-kd
1063280-kd
H1-kd
1063214-kd
H33-kd
H34-kd
H36-kd
H38-kd
H37-kd
1063177-kd
1063144-kd
1063146-kd
H32-kd
1063143 -kd
H31-kd
1063282-kd
RF01022-00241-kd
RF05031-00130-kd
RF03021-00240-kd
Description
YOKE ASSEMBLY
REAR YOKE
FRONT YOKE, 2” DRAWBAR PIN
VERTICAL HITCH PIN (1063284-kd, Pin Assy) (2”)
HORIZONTAL HITCH PIN (2”)
DRAW BAR HITCH PIN (2”)
2" CASTLE NUT
2" FLAT WASHER
COTTER PIN
REAR YOKE BUSHING
REAR YOKE BUSHING
THRUST WASHER
FRONT YOKE BUSHING
HITCH PIVOT BUSHING
HITCH ADAPTER PLATE
HITCH ASSEMBLY
BOLT
LOCK WASHER
NUT
Qty
1
1
1
1
1
1
3
3
3
2
2
4
4
2
1
1
7
7
7
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
190
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1951381475-kd* & 1951371523-kd
Caution
Grease yoke and hitch assemblies
daily. Always replace pins when
replacing bushings or likewise
replace bushings when replacing
pins.
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part #
1951371523-kd
1951371915-kd
1951371521-kd
0291366570-kd
0291366686-kd
0051378209-kd
0051366510-kd
0131371550-kd
0050025505-kd
0131371552-kd
1951381475-kd*
0111365974-kd
0111365961-kd
JD7781-kd
0051302004-kd
0051372091-kd
0051372113-kd
JD7759-kd
Description
Qty.
HITCH ASSY
1
YOKE, FRONT
1
YOKE, REAR
1
NUT PLATE
1
BUSHING
1
SLOTTED NUT
3
FLAT WASHER
1
QUICK LOCK PIN 2
COTTER KEY
3
QUICK LOCK PIN 1
YOKE ASSY KIT
1
HITCH BUSHING 4
YOKE BUSHING
6
GREASE FITTING 1
HITCH BOLT
7
HITCH NUT
7
FLAT WASHER
3
GREASE FITTING 1
*1951381475-kd yoke kit
includes the yoke & hitch
assemblies with connecting
vertical pin only. This does not
include Horizontal Pin (Item 8).
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
191
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 5
Valve Ass'y
&
Components
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
192
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CHECK VALVES
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
PART #
DESCRIPTION
1022102-kd
CHECK VALVE, 1/4" (F-F)
R428-FFOW-08-kd
CHECK VALVE, 1/2" (F-F)
R428-FFOW-12-kd
CHECK VALVE, 3/4" (F-F)
PART #
1023143-kd
DESCRIPTION
Cartridge, Check Valve
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
193
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R441-kd PILOT CHECK VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM #
1
PART NO DESCRIPTION
R441-KD
QTY
PILOT CHECK VALVE ASSY
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
194
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R229-kd RELIEF VALVE (600 psi)
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM
PART #
DESCRIPTION
QTY
1
R229-3-kd
VALVE HOUSING
1
2
1022945-kd
SEAL KIT
1
3
R421-600-kd
RELIEF VALVE CARTRIDGE
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
195
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R443-kd RELIEF VALVE (1750 psi)
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
Note: Complete valve assembly only is
available for replacement. Cartridge
number is for reference purposes only.
¾” NPT
ITEM
PART #
DESCRIPTION
QTY
1
R420-kd
RELIEF VALVE HOUSING, 3/4 NPT
1
2
1022945-kd
SEAL KIT
1
3
R421-1750-kd
RELIEF VALVE CARTRIDGE
REF
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
196
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R699-600N-kd RELIEF VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
1/2 NPT
Type. –2
ITEM
PART #
DESCRIPTION
QTY
1
R229-3-kd
RELIEF VALVE HOUSING, 1/2 NPT
1
2
1022945-kd
SEAL KIT
1
3
R421-600-kd
RELIEF VALVE CARTRIDGE
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
197
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R763-kd SEQUENCE VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM
PART #
DESCRIPTION
QTY
1
R763-1-kd
SEQUENCE CARTRIDGE *
1
2
R763-2-kd
SEQUENCE VALVE BLOCK *
1
3
1023143-kd
CHECK CARTRIDGE
1
1A*
1022375-kd
SEQUENCE VALVE SEAL KIT
1
3A*
1024854-kd
CHECK CARTRIDGE SEAL KIT
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
198
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R763A-kd SEQUENCE VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM
PART #
DESCRIPTION
QTY
1
1060881-01-kd
SEQUENCE CARTRIDGE (*)
1
2
1028279-99-kd
SEQUENCE VALVE BLOCK
1
1022375-kd
SEAL KIT for PN# 1060881-01
1
1A*
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
199
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023480-kd SEQUENCE VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM
PART #
DESCRIPTION
QTY
1
1021632-kd
CARTRIDGE *
1
2
1023384-kd
HOUSING
1
3
1023143-kd
CHECK CARTRIDGE *
1
1A* 1022912-kd
SEAL KIT
1
3A* 1024854-kd
SEAL KIT
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
200
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1023927-kd RELIEF VALVE
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
ITEM
PART #
DESCRIPTION
QTY
1
R229-3-kd
RELIEF VALVE HOUSING, 1/2 NPT
1
2
1022945-kd
SEAL KIT
1
3
R421-2200-kd
RELIEF VALVE CARTRIDGE
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
201
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
CEPCO(10 & 12 ft. WIDE) VALVE ASSY’S
Caution
Do not over tighten the valve
cartridge into the valve housing.
“Hand tightened” pressure should
be sufficient to seal the hydraulic
fluid into the cartridge.
Item
1
1A
2
2A
3
Part #
Description
Qty
SVA-kd
SEQUENCE VALVE
1
V2-kd
SEQUENCE VALVE CARTRIDGE
1
RVA-kd
RELIEF VALVE
1
V5-kd
RELIEF VALVE CARTRIDGE
1
R428-FFOW-12-kd CHECK VALVE
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
202
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 6
Wheel
Assembly
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
203
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1024516-kd
Item
Part #
Description
Qty.
1
1024516-kd
Wheel (14 x 22.5)
1
2
1035330-kd
Valve stem
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
204
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
PN# 1060601-kd
Item
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
GRADER WHEEL
Part #
Description
Qty.
1
1060601-kd
Wheel (9 X 24)
1
2
1035330-kd
Valve stem
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
205
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060816 WHEEL (WALKING TANDEM)
Item
Part #
Description
Qty.
1
1060816-kd
Wheel (8 X 22.5)
1
2
1035330-kd
Valve stem
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
206
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1060926-kd
Item
Part #
Description
Qty.
1
1060926-kd
Complete Wheel Assembly
1
2
1060926-03-kd
O-ring
1
3
1062896-kd
Flange side
1
4
1060926-02-kd
Lock ring
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
207
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# 1062751-kd
Item
Part #
Description
Qty.
1
1062751-kd
Wheel assembly
1
2
1060926-03-kd
O-ring
1
3
1062896-kd
Flange side
1
4
1060926-02-kd
Lock ring
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
208
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# B080-5B-kd
Item
Part #
Description
Qty.
1
B080-5B-kd
Wheel (10x28)
1
2
1035330-kd
Valve stem
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
209
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R435-kd
Item
1
Part #
R435-kd
Description
Wheel (11x16.1)
Qty.
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
210
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R619-kd
ITEM
PART #
DESCRIPTION
QTY.
1
R619-kd
WHEEL (11x16.1)
1
2
R429-2-kd
VALVE STEM
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
211
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PN# R619HD-kd
ITEM
PART #
DESCRIPTION
QTY.
1
R619HD-kd WHEEL (11x16.1)
1
2
R429-2-kd
1
VALVE STEM
* R619HD-kd is same as R619-kd
with a thicker wheel center.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
212
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
WHEEL OPTIONS FOR CEPCO SCRAPER
Item
1
2
3
4
5
Part #
T1-kd
T2TIRE-kd
B1925HTN95-kd
23.5 x 25-kd
63X4300X25-kd
Description
TIRE RIM - 9 X 24 SINGLE PIECE TIRE
TIRE - 13.00 X 24TG (14PLY) TUBLESS, GRADER TYPE
TIRE RIM
TIRE - (23.5 X 2500 20PLY)
LGP TIRE (63 X 4300 X 25), TERRA TREAD
Qty
6
6
3
3
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
213
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
PART #
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
TIRE SIZE
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
PYL RATING
INFLATION
MAX
PSI
NORMAL
R429-kd
11L x 16 (tube)
8 PR
36.
32
R438-kd
11.25 x 28 (tube)
10 PR
40
36
R631 -kd
13.5 x 16.1 (tube)
10 PR
40
38
1023533-kd
18 x 22.5 (tubeless)
16 PR
120
85
1031502-kd
11.25 x 28 (tubeless)
12 PR
48
44
1060603-kd
13.00 x 24 (tubeless)
16 PR
70
55
1060750-kd
445/65R 22.5 G178 (tubeless)
18 PR
120
85
1060927-kd
17.5 x 25 E2/L2 (tubeless)
16 PR
65
50
1061456-kd
26 x 12-2 (tubeless)
6 PR
34
30
1062529-kd
17.5 x 25 XLTA L2 (tubeless)
RADIAL
73
65
1062755-kd
20.5-255 LS SGGD (tubeless)
20 PR
65
60
1062772-kd
66 x 43-25 LGP (tubeless)
20 PR
50
45
1063055-kd
20.5 R 25 G2/L2 (tubeless)
RADIAL
73
65
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
214
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 7
Blades,
Router Bits,
Frost Bits,
Wing Bits &
Shoes
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
215
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
WEAR PLATES/ROUTER BITS
Item #
Part #
Description
Qty
1
D309-kd
WEAR PLATE, 4 HOLE LH
1
2
D310-kd
WEAR PLATE, 4 HOLE RH
1
3
1020677-kd
WEAR PLATE, 5 HOLE LH
1
4
1020678-kd
WEAR PLATE, 5 HOLE RH
1
5
1062894-kd
WEAR PLATE, 5 HOLE LH
1
6
1062895-kd
WEAR PLATE, 5 HOLE RH
1
7
C763-1-kd
WEAR PLATE, 6 HOLE LH
1
8
C763-2-kd
WEAR PLATE, 6 HOLE RH
1
9
D895-kd
WEAR PLATE, 6 HOLE LH
1
10
D896-kd
WEAR PLATE, 6 HOLE RH
1
11
1024960-kd
WEAR PLATE, 6 HOLE LH
1
12
1024961-kd
WEAR PLATE, 6 HOLE RH
1
13
1951371750-kd
WEAR PLATE, JD, LEFT
1
14
1951371751-kd
WEAR PLATE, JD, RIGHT
1
15
C13220L-kd
WEAR PLATE, SCOOPALL .LEFT
1
16
C13220R-kd
WEAR PLATE, SCOOPALL, RIGHT
1
17
4J8665R-kd
WEAR PLATE, FORGED, UNIVERSAL
2
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
216
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
BLADE OPTIONS
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Part #
A047-3-kd
A047-5-kd
A047-10-kd
A996-3-kd
A996-5-kd
B612-kd
B708-kd
B812-kd
B876-kd
C112-kd
D502-kd
D832-kd
1021261-kd
1020742-kd
1020743-kd
1022327-kd
1022472-kd
1024205-kd
1028786-kd
1029001-kd
1029485-kd
1030270-kd
1030271-kd
1060729-kd
1060729SPC-kd
1061019-kd
1061020-kd
1062691-kd
1061157-kd
1061169-kd
1061307-kd
1062421-kd
1062422-kd
1062423-kd
Description
BLADE (8 x 72")
BLADE (8 x 84")
BLADE (10 x 84")
BLADE (8 x 30")
BLADE (10 x 29.5")
BLADE (6 x 120")
BLADE (6 x 144")
BLADE (6 x 168")
BLADE (6 x 192")
BLADE (6 x 119 3/8")
BLADE (6 x 216")
BLADE (8 x 144")
BLADE (10 x 96”)
BLADE (10 x 165.5")
BLADE (10 x 141.75")
BLADE (10 x 144")
BLADE (10 x 84”)
BLADE (10 x 167.75")
BLADE ( 8 x 84")
BLADE (8 x 72")
BLADE (8 x 46")
BLADE (8 x 40")
BLADE (10 x 40")
BLADE (13 x 41.88")
BLADE (16 x 41.88")
BLADE (14 x 42")
BLADE (10 x 41.88")
BLADE (10 x 120")
BLADE (10 x 48")
BLADE (16 x 48")
BLADE (10 x 48")
BLADE (10 x 48")
BLADE (10 x 36")
BLADE (12 x 48")
The following blades listed are among the most popular
sizes for Reynolds Scrapers. Please call with a specific
scraper make and model for listings on available blades.
®
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
217
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
WING BITS AND SHOES
WING BITS
Item
1
2
Part #
D891-kd
D892-kd
Description
WING BIT, LH
WING BIT, RH
Qty
1
1
SHOES (REAR WEAR PLATES)
Item
Part #
1022421-kd
1
MS00-129ZZ-kd
2
RRB-1-kd
3
Description
SHOE PLATE
SHOE PLATE
SHOE PLATE
Qty
1
1
1
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
218
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Section 8
Drawbars
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
219
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
DRAWBARS
Important Note for Drawbars:
•
•
•
This list of drawbars is for reference purposes only. There are many serial number
breaks and special circumstances for many different model tractors. Use extreme
caution when ordering for tractor models 2005 and above, tractors with tracks,
tractors with back plates and/or 3 point hitches, as well as, tractors with older serial
numbers.
Pin size options for drawbars vary with the make and model of scraper that will be
attached to the drawbar. Indicate the size pin or give a scraper model if you are
unsure which size pin is required. The following sizes are 1.5”, 2” & 60mm.
Quick hitch options are now available on most all drawbars. Call for pricing and
availability.
Case IH
MODEL
4366
4386
4566
4568
4586
4786
5088-5288
5488
7110
7120
7130
7140
7150
8900 Series
8950
MX150
MX170
MX180
MX200
MX220
MX240
MX270
STX Series
PART #
D475-kd
D475-kd
D475-kd
D475-kd
D475-kd
D475-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1026129-kd
1062294-01-kd
1062294-01-kd
1062179-01-kd
1062179-01-kd
1062179-01-kd
1062179-01-kd
1062179-01-kd
1060610-kd
Caterpillar
MODEL
Challenger 35, 45, 55
PART #
1060765-kd
Challenger 65, 70, 75, 85
with 3 point hitch only
Challenger 65, 70, 75, 85
Back Plate
MT 700
MT 800
MT 800 back plate
E Series, 1.5" pin
E Series, 2" pin
1060704-DB-kd
1060704-BP-kd
MT700-DB-kd
MT800-DB-kd
MT800-BP-kd
XPO316-kd
XPO337-kd
Buhler Versatile
MODEL
9480, 9680
PART #
1060768-kd
Ford (New Holland)
MODEL
Genesis Series 70
TJ 425
PART #
1060765-kd
IMC-DB-TJ-425-kd
Massey Ferguson
MODEL
8260, 8270, 8280
PART #
1062794-01-kd
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
220
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
DRAWBARS
Important Note for Drawbars:
•
•
•
This list of drawbars is for reference purposes only. There are many serial number
breaks and special circumstances for many different model tractors. Use extreme
caution when ordering for tractor models 2005 and above, tractors with tracks,
tractors with back plates and/or 3 point hitches, as well as, tractors with older serial
numbers.
Pin size options for drawbars vary with the make and model of scraper that will be
attached to the drawbar. Indicate the size pin or give a scraper model if you are
unsure which size pin is required. The following sizes are 1.5”, 2” & 60mm.
Quick hitch options are now available on most all drawbars. Call for pricing and
availability.
John Deere
MODEL
4630
4640
4650
4755
4760
4840
4850
4950
4955
5010
5020
6030
7020
7520
8000 Series (SN 0-9999)
8000 Series (SN 10000+)
PART #
C172-kd
C907-kd
C907-kd
C907-kd
C907-kd
C907-kd
C907-kd
C907-kd
C907-kd
C172-kd
C172-kd
C172-kd
C172-kd
C172-kd
1060649-kd
1060649-02-kd
MODEL
8430
8440
8450
8560
8570
8630
8640
8650
8760
8870
8960
8970
9100
9200
9300
9400
PART #
C172-10-kd
C172-10-kd
C172-10-kd
1058801-kd
1058801-kd
C172-10-kd
C172-10-kd
C172-10-kd
1058801-kd
1058801-kd
1058801-kd
1058801-kd
1058801-kd
1058801-kd
1058801-kd
1058801-kd
*CALL FOR PRICING AND AVAILABILITY OF DRAWBARS FOR ALL TRACK SERIES MODELS, AS WELL AS, ANY MODEL 2006 & ABOVE.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
221
5510 N. Hwy 31
P.O. Box 70
Sherrill, AR 72152
800-533-1893 (toll free)
870-766-8378 (office)
870-766-8379 (fax)
Web: www.kdsales.com
E-mail: kdsales@kdsales.com
“We make the earth move”
Reverse Adapter Options
Quick Hitch Reverse Adapter
Part # 1062352-kd
The reverse adapter piece will convert a two or
four eared drawbar back to a clevis style drawbar
to pull ag implements. This piece can be used on
quick hitch on conventional style scraper drawbar
with ears.
Note: The customer’s existing scraper style
drawbar must accept a 1.5” diameter pin or
reducing bushings may be required to use this
piece.
Conventional Style Reverse Adapter
Part # D788-kd
The reverse adapter piece will convert
conventional style scraper drawbar with ears or
bushing tube to pull ag implements
Note: The customer’s existing scraper style
drawbar must accept a 1.5” diameter pin or
reducing bushings may be required to use this
piece.
All names used within this book are for reference purposes only. Visit us on the web at www.kdsales.com.
This book was published on October 14, 2009. Please remove all previous editions.
222

Similar documents

Licorice International

Licorice International Licorice International 803 Q Street, Suite 300 Lincoln Nebraska 68508 Phone: 1-800-LICORICE (542-6742) www.LicoriceInternational.com

More information