Brochure - Selway Machine Tool Co.

Transcription

www.clausing-industrial.com
Variable Speed 20" Single and
Multi-spindle, Belt Drive Industrial
Drill Presses
Two Speed Variable Speeds 150-2000rpm
Variable Speeds 200-1300rpm
Variable Speeds 300-2000rpm
Clausing Industrial, Inc.
Clausing 20"
Drill Presses
Infinitely Variable Speed Countershaft Drive...
Dial to the best rpm for the tool and material while the job
is running, with a Clausing Two Speed Variable Speed Drill Press.
150 to 2000 rpm... speeds to drill large holes, small holes to
spot face, counterbore and ream.
A flip of the switch changes from low range to high range,
perfect for production applications with quick change tooling.
Greater capacity, too, with Clausing Two Speed,
production rated 1" in cast iron, 3/4" in steel
with optional power feed.
Clausing
Handle more jobs ... better, faster with a
Clausing 20" Two Speed drill press.
More features for superior
performance...
Drills are
equipped
with a
Spindle Guard that locks in
an upright position, away
from spindle nose,
for easy tool changes.
Heavy-duty precision head... all bearing surfaces are
precision bored simultaneously for exact alignment.
Eight ball bearings support the drive and spindle,
lower spindle bearing has a double row to absorb
both radial and thrust loads.
3 MT spindle... with 6-1/2" travel, 2-1/2" diameter quill and
micrometer depth stop.
4" column with 3/16" thick wall for great rigidity and accuracy.
Precision ground 22" x 19" oil through table, handles large
parts and fixtures.
Style A
Floor Drill with
22” x 19.5” (559 x 495mm)
Table, 66" (1676mm)
column standard and 1/2"
cored T-slots on 9" centers
for table and base
Style B
Head & Column
Assembly and
20-501 Table
Assembly
Powerful
Countershaft Drive
Three V-belts and a cog belt transmit positive power
to the spindle.
Clausing’s heavy-duty drive delivers full power to
spindle at all speeds.
Specifications:
Capacity, hand feed
Production rated, with optional
power feed, 11/2 hp motor
Drill to center of circle
Spindle nose
Spindle travel
Column
Quill (ground steel)
Quill return spring, capacity
TABLE, DRILL PRESS Style A
Working surface
Table slots
Table travel, one setting
Spindle to table, maximum
BASE, DRILL PRESS Style A
Working surface, ground
Base T-slots
Spindle to Base, maximum
Optional Electrical Equipment*
For Factory Installation Only
NOTE: Magnetic starters protect motor against overload, low and
no voltage-Thermal Overload Unit NOT required.
1.25" (31.75mm) dia.
1" (25.4mm) in cast iron
3/4" (19mm) in mild steel
20" (508mm) dia.
No. 3MT, 1.74" (44.2mm) OD
6.5" (165mm)
ground steel, 4" (102mm) dia.,
3/8" (9.5mm) thick wall
2.5" (63.5mm) dia.
40 lbs (18kg)
For Single Speed Motor No. 2371 MAGNETIC STARTER.*
Protects motor against overload, low and no voltage. Motor will not
automatically restart when power is restored. Transformer provides
110v at start/stop push button. 6 lbs.
No. 2371-15 MAGNETIC STARTER for 3-phase. Includes disconnect
switch and 110 volt push-buttons.
No. 2377 REVERSING DRUM SWITCH for 1 & 3-phase.* Protects
motor against overload, low and no voltage. Motor will not
automatically restart when power is restored. Transformer provides
110v at start/stop push button switch. 6 lbs.
22" x 19.5" (559 x 495mm)
two, 15.5" (394mm) long, for
.5" (12.7mm) T-bolt
20" (508mm)
33.125" (841mm)
For 2-Speed Motor
No. 2375 MAGNETIC STARTER and REVERSING DRUM SWITCH,
with reverse on low speed. * Protects motor against overload, low
and no voltage. Motor will not automatically restart when power is
restored. Transformer provides 110v at start/stop push button
switch. 6 lbs.
15.5" x 13" (394 x 330mm)
two, 13" (330mm) long, for
.5" T-bolt
43.375" (1102mm)
*Controls for field installation, and for single phase ... price on application.
DRILL PRESS Style B
Column bracket to center of spindle
9.25" (235mm)
Column to center of spindle
10" (254mm)
Spindle to table, max. distance
25.437" (646mm)
Column length
43" (1092mm)
Min. center to center distance
20" (508mm)
Motor ... NEMA Frame Sizes
182 and 184
Shipping weights, approximate, with motors
Drill press Style A
630 lbs. (286kg)
Drill press Style B
390 lbs. (177kg)
Overall Dimensions
Width
Depth
Height
Drill press Style A 22" (559mm) 36" (914mm)
69" (1753mm)
Drill Press Style B 20" (508mm) 3.25" (870mm) 51.625" (1311mm)
FLOOR MODELS FURNISHED with: No. 3MT spindle; table elevating
mechanism; switch; belt guard; spindle guard. Motors and switches are
installed and wired, ready to connect to power.
Design and specifications are subject to change without notice.
Infinitely Variable Speed Countershaft Drive
Motor
Furnished
Style A
Floor Drill
22" x 19" Table
Style B
Head & Column
Assembly
Two Speed Infinitely Variable Speeds: 150-2000 rpm 1-1/2 - 3/4 Hp
2-speed, 3-phase, 220v*
2-speed, 3-phase, 440v*
2276
2277
2286-300
2287-300
Infinitely Variable Speeds: 200-1300 rpm 1-1/2 Hp
11⁄2 Hp, 3-ph, 1140 rpm
2275
2285-300
Infinitely Variable Speeds: 300-2000 rpm 1-1/2 Hp
11⁄2 Hp, 1-ph, 1725 rpm
11⁄2 Hp, 3-ph, 1725 rpm
2272
2274
2282-300
2284-300
*Motor, 11⁄2-3⁄4 hp 1800/900 rpm, 60hz. SPECIFY VOLTAGE... When voltage is not specified,
motor will be wired on lower voltage. Motors are ball bearing. 3-phase single speed motors
are 208/220/440v, 60hz. Single-phase motors are capacitor-start, 115/230v, 60hz.
**Style B
Head & Column
Assembly,
43" (1092mm)
Column Standard
**Head and Column Models Furnished with: No. 3MT spindle, head elevating mechanism, column, mounting flange, switch and belt guard.
Motor and switches are installed and wired, ready to connect to power.
Clausing 20" (508mm) Multiple Spindle Drill Presses
Clausing multiple spindle drills can be custom built with up to four 20" heads. When ordering a multiple spindle drill
press use the table model number below, plus the appropriate head and column assemble for the
corresponding number of heads.
Mix and match any number of drill heads as your requirements demand. Example: If you wish to have a 3 spindle
drill press with three-20" heads you would order (1) 20-503 table assembly and (3) 2286-300 20" head
assemblies. Tell us the order to mount the heads and you have the 3-spindle drill you require.
If you have a special request, contact us for a quotation. *Special orders priced on application.
(1) 2286-300
Head & Column
Assembly and
20-501 45.5" x 29.5" (1156 x 750mm)
Table with Legs
(4) 2286-300
Head & Column
Assembly and
20-504 85.5" x 29.5" (2172 x 750mm)
Table with Legs
20-502 • 2-Spindle
20-501 • 1-Spindle
381/4"
34"
263/16"
20"
20"
(508mm)
(508mm)
40"
(1016mm)
24"
(610mm)
25.5"
10"
(254mm)
20"
(508mm)
10"
(254mm)
40"
(648mm)
(1016mm)
45.5"
45.5"
(1156mm)
(1156mm)
257/16"
MAX.
9"
10"
91/4"
6"
41/2"
855/8"
MAX.
34"
291/2"
One piece table, two legs furnished
20-504 • 4-Spindle
20-503 • 3-Spindle
13"
(330mm)
27"
(686mm)
80"
(2032mm)
85.5"
(2172mm)
24"
(610mm)
25.5"
(648mm)
10"
20"
(508mm)
80"
(2032mm)
85.5"
(2172mm)
243/4"
Clausing 20" (508mm) Drill Accessories
Programmable Macro-Driller Power Feed
No. 2215-1
The Programmable Macro-Driller can be installed on any
model of Clausing 20" drill press, either at time of purchase
or as a retrofit. It allows you to automate hole drilling and is
most effective on deep hole ‘Peck’ drilling. Peck drilling is
used to prevent shavings from tangling with the drill bit and
breaking it. The up and down motion of ‘peck drilling’ allows
the drill to go slightly deeper into the material then
withdrawing to pull the chips out of the hole.
The Programmable Macro-Driller is easy to program by
using the keypad.
Coolant
System
No. 7044 Coolant
System. 5 gallon
capacity, 110 volt, 60
cycle single-phase
motor, for single spindle
drills. Flexible nozzle with
regulator valve, plastic
hose, clamps, fittings,
cord and plug. 18 lbs.
No. 7044-2 Coolant
System. For two (2) spindle drills.
5 gallon capacity, 110 volt, 60 cycle single-phase motor.
Complete with all valves, hose, fittings, cord and plug.
No. 7044-3 Coolant System. For three (3) spindle drills.
Like No. 7044-2 except arranged for 3 spindles.
No. 7044-4 Coolant System. For four (4) spindle drills.
Like No. 2044-3 except arranged for 4 spindles.v
Drill Press
Lamp
No. 7022 Lamp.
Cool burn-proof shade,
aluminum reflector, switch,
19" (483mm) flexible arm, magnetic
base, 6' (1.5m) cord and plug.
Programmable Macro-Driller Specification
Quill Travel:
Feedrate Range:
Peck Steps:
Maximum Pecks per Hole:
Accurate Hole Depth:
Maximum Quill Force:
LED Numerals:
Control Power:
Max. Drilling Capacity:
6.4" (62mm)
0.01 - 60 ipm (0.25 - 1500mm/min)
0.001" - 6.4" (0.02 - 162mm)
1400
±0.001" (0.02mm)
1250 lbs. (568 kg)
5/8" (15.9mm) high
220/230 volt, 50/60 Hz
Single or Three Phase
1" (25.4mm) in cast iron
Drill Chuck and Arbor
3/4" (19mm) in mild steel
Electric Foot Control
No. 302 Electric Foot Control
No. 302R1 Electric Foot
Control with reversing drum
switch for single speed drill
No. 302R2 Electric Foot Control
with reversing drum switch for
two speed drills Start and stop
drill from foot pedal
No. 1897 Key-Type Chuck. Takes 3⁄16" (4.8mm) to 3⁄4" (19mm)
drills. Adapts to 3JT spindle with No. 1898 arbor. 4 lbs. (1.8kg)
No. 1898 Arbor. Adapts No. 1897 to 3JT spindle. 1 lb. (.5kg)
Columns
Mesh Guard
No. SK-208
Top Mesh
Belt Guard
No. 2294-AMT 66" (1676mm) Column in lieu of
43" (1092mm) Column 78 lbs. (35kg)
No. 2349-AMT 90" (2286mm) Column in lieu of
66" (1676mm) Column 107 lbs. (49kg)
Your Single Source for Machine Tools
Clausing Precision Drills
Clausing Precision Mills
Clausing Precision Lathes
■ Clausing Belt-drive Drills
■ Clausing Geared-head Drills
■ Clausing Radial Drills
■ Clausing Bed Mills
■ Clausing CNC Bed Mills
■ Clausing Knee Mills
■ Clausing EVS Knee Mills
■ Clausing Universal Mills
■ Clausing/Colchester Geared Head Lathes
■ Clausing/Colchester Professional V.S. Lathes
■ Clausing/Metosa Geared Head & V.S. Lathes
■ Clausing/Metosa CNC Lathes
■ Clausing Large Swing Standard and CNC Lathes
Clausing Precision Grinders
Clausing Precision Cutting Machines
■ Clausing Manual Grinders
■ Clausing 2 Axes Hydraulic Grinders
■ Clausing 3 Axes Hydraulic Grinders
■ Clausing ASDlll Automatic Grinders
■ Clausing/Kalamazoo Horizontal Bandsaws
■ Clausing/Kalamazoo Vertical Bandsaws
■ Clausing/Kalamazoo Cold Saws
For detailed catalogs of the full line of Clausing Machine Tools visit our Web Site:
or e-mail us and request an electronic (pdf) catalog at:
info@clausing-industrial.com
Your Authorized Clausing Precision Machine Tools Distributor
1819 North Pitcher Street
Kalamazoo, Michigan 49007-1886
Phone: 269-345-7155
Fax: 269-345-5945
Information: info@clausing-industrial.com
Issued 3-12
Call Toll Free: 800-323-0972
or visit our website
Ibarmia Drill Catalog 8-10
9/21/10
12:25 PM
Page 2
Series TGeared-drive
Round-column Drills
A heavy-duty Industrial Drilling Machine,
designed for easy operation with manual feed
Standard Features and Equipment:
•
•
•
•
•
•
•
•
•
•
•
•
Drilling capacity in steel: 1" (25mm) maximum
Drilling capacity in cast iron: 1.18" (30mm) maximum
Tapping capacity in steel: .71" (18mm) maximum
Tapping capacity in cast iron: .87" (22mm) maximum
Depth scale and adjustable depth stop
“RS” models are equipped with automatic feed reversing
system for tapping
Thermomagnetic switch
Spindle reversing switch
Automatic tool ejector
Emergency STOP
High/low speed range selector
Drill guard with microswitch
TM25
TS25
Optional MCC-KT
13.8" x 10.8 cross
slide table
Page 2
TL25
Controls mounted on the front
of the headstock for operator
convenience for fast and easy
speed selection
Ibarmia Drill Catalog 8-10
9/21/10
12:26 PM
Page 3
Capacities, Specifications and Dimensions
TS18
TM18
.71" (18mm)
1" (25mm)
.55" (14mm)
.71" (18mm)
.71" (18mm)
1" (25mm)
.55" (14mm)
.71" (18mm)
Models
Auto feed reversing “RS” Models
Capacities:
Maximum drilling capacity in steel
Maximum drilling capacity in cast iron
Maximum tapping capacity in steel
Maximum tapping capacity in cast iron
Specifications:
Spindle taper
Quill diameter
Spindle travel (drilling depth)
Main motor power
No. of speeds (see speed charts)
TL18
TS25
TS25RS
TM25
TM25RS
TL25
TL25RS
.71" (18mm)
1" (25mm)
1" (25mm)
1" (25mm)
1" (25mm) 1.18" (30mm) 1.18" (30mm) 1.18" (30mm)
.55" (14mm) .71" (18mm) .71" (18mm) .71" (18mm)
.71" (18mm) .87" (22mm) .87" (22mm) .87" (22mm)
3MT
3MT
3MT
3MT
3MT
3MT
2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm) 2.44" (62mm)
4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm) 4.72" (120mm)
.75/1.1 Hp (.55/.80 Kw)
1/1.5 Hp (.73/1.1 Kw)
8
8
8
8
8
8
Dimensions and Weights
Height (A)
Height (A1)
Base: length x width (B)
Base to spindle (C)
Spindle center to column (D)
Spindle to Table (E)
Minimum
Maximum
Worktable: length x width (F)
Base height (G)
Column diameter (H)
Floor to top of base (I)
Cabinet height (J)
Net weight
Shipping weight
Shipping dimension (length x width x height)
47.6" (1210mm)
79.1" (2010mm)
22" x 15" (560x380mm)
See (E)
9.84" (250mm)
48.4" (1230mm)
79.9" (2030mm)
22" x 15" (560x380mm)
20.9" (530mm)
9.84"( 250mm)
75.8" (1925mm)
24" x 15" (600x380mm)
47.6"(1210mm)
9.84" (250mm)
47.6" (1210mm)
79.1" (2010mm)
22" x 15" (560x380mm)
See (E)
9.84" (250mm)
48.4" (1230mm)
79.9" (2030mm)
22" x 15" (560x380mm)
20.9" (530mm)
9.84" (250mm)
4.33" (110mm)
19.7" (500mm)
3.1" (80mm)
3.94" (100mm)
34.6" (880mm)
31.5" (800mm)
298 lbs (135kg)
353 lbs (160kg)
20" x 32" x 55"
1.18" (30mm) 4.13" (105mm)
12.6" (320mm) 25.2" (640mm)
10.6" x 11.8" (270 x 300mm)
3.1" (80mm) 3.7" (95mm)
3.94" (100mm) 3.94" (100mm)
34.6" (880mm)
31.5" (800mm)
364 lbs (165kg) 408 lbs (185kg)
419 lbs( 419kg) 496 lbs (225kg)
20" x 32" x 55" 20" x 36" x 75"
4.33" (110mm)
19.7" (500mm)
3.1" (80mm)
3.94" (100mm)
34.6" (880mm)
31.5" (800mm)
298 lbs (135kg)
353 lbs (160kg)
20" x 32" x 55"
1.18" (30mm) 4.13" (105mm)
12.6" (320mm) 25.2" (640mm)
10.6" x 11.8" (270 x 300mm)
3.1" (80mm) 3.7" (95mm)
3.94" (100mm) 3.94" (100mm)
34.6" (880mm)
31.5" (800mm)
364 lbs (165kg) 408 lbs (185kg)
419 lbs (419kg) 496 lbs (225kg)
20" x 32" x 55" 20" x 36" x 75"
(.5 x .8 x 1.4m)
(.5 x .8 x 1.4m)
(.5 x .9 x 2.1m)
(.5 x .8 x 1.4m)
(.5 x .8 x 1.4m)
75.8" (1925mm)
24" x 15" (600x380mm)
47.6" (1210mm)
9.84" (250mm)
(.5 x .9 x 2.1m)
Standard motor: 1800/3600 rpm
Spindle speeds (rpm)
90-192-300-504-612-1020-1740-3360
A
E
D
G
A
D
H
A1
F
E
G
H
F
D
E
A1
F
H
A
C
I J
I J
B
B
G
B
Optional
PKB
cabinets
Page 3
Clausing Radial Drills
Models: CL920A
Features and Standard Equipment:
l Limit switch
l High speed gears are made of Nickel-Chrome Steel
and are heat-treated and ground for durability
l Powerful 2 Hp spindle drive motor for heavy-duty
cutting
l Extra auxiliary dial for spindle feed depth indication,
allows review of spindle feed depth, .0394" to 7.874"
l Special spindle balance mechanism, superior to
traditional balance mechanism and extends Balance
Spring life
l Coolant system
l Low volt and overload protection
l CSA Electrics Standard l Tool kit and manuals
Specifications:
Dimensions:
K
E
H
F
L
G
A
C
D
B
Q
RxS
Capacities:
Model
Capacity:
Drilling
In Steel
In Cast Iron
Tapping
In Steel
In Cast Iron
Boring
In Steel
In Cast Iron
CL920A
1.26" (32mm)
2" (50mm)
1" (25mm)
1.26" (32mm)
2.75" (70mm)
4.06" (105mm)
Model
Working Area:
Column Sleeve Dia. (E)
Column Face to Spindle Center
Maximum (D+C)
Minimum (D)
Spindle Head Travel (C)
Base Surface to Spindle End
Maximum (A)
Minimum (B)
Arm Vertical Travel (A-B)
Arm Rotation (Right & Left)
Baseplate Working Surface
Box Table Area
Length (L)
Width (K)
Height (H)
Base Dimensions
Floor Area (R x S)
Height (Q)
Drill Head:
Spindle Taper
Spindle Stroke
Quill Diameter
Number of Spindle Speeds
Spindle Speeds (rpm)
Number of Feeds
Spindle Feed Rate (in/rev.)
(mm/rev.)
Spindle Drive Motor
Elevating Motor
Coolant Pump Motor
Dimensions and Weights:
Max. Machine Height (F)
Base and Column Height (G)
Shipping Dim.
Length
Width
Height
Net Weight
Shipping Weight
4
CL920A
8.28" (210mm)
37.4" (950mm)
8.7" (220mm)
28.7" (730mm)
47.6" (1210mm)
13.8" (350mm)
25.2" (640mm)
180°
35.5" x 25.3" (902x643mm)
23.6" (600mm)
17.5" (445mm)
15" (380mm)
49.6" x 25.2" (1260x640mm)
6.5" (160mm)
4MT
8.66" (220mm)
2.95" (75mm)
6
88, 154, 282, 455, 796, 1500
3
0.002"/0.0035"/0.006"
.05mm/.09mm/.15mm)
2 hp (1.5 Kw)
1 hp (.75 Kw)
1/8 hp (.10 Kw)
91.3" (2320mm)
79.1" (2010mm)
71.1" (1806mm)
32.5" (826mm)
86.2" (2190mm)
2,756 lbs. (1250kg)
3,086 lbs. (1400kg)
A Line of Precision, High Performance
Geared-drive Prismatic-column Drills
Models with Autofeed Reversing Systems
for Tapping Standard
SeriesF Geared-drive
Prismatic-column Drills
With Electromagnetic Clutch
Automatic Feed Control
The F series Industrial Drilling Machine is
equipped with standard features that allow a
wide range of drilling/milling applications. The
rotating head, rotates 45° left or right, gives
even more machining flexibility.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drilling capacity in steel: 1.38" (35mm) maximum
Milling capacity in steel: 1.80" (45mm) maximum
Milling capacity in cast iron: 3.20" (80mm) maximum
Tapping capacity in steel: 1.18" (30mm) maximum
Tapping capacity in cast iron: 1.30" (33mm) maximum
18 spindle speeds
Automatic feed reversing system for tapping
on “RS” models
Adjustable vertical position of head by geared-motor
Head rotates 45° left or right of center
Large worktable with 3 T-slots
Hardened and ground high quality steel gears
Gear box lubrication by automatic pump
Guide ways lubricated by manual pump
Speed plate and selecting levers on front of head
High/low speed range selector
Coolant tank and pump in machine base
Co-ordinate cross slide table
Automatic feed and cut-off by electromagnetic clutch
Work light
Front hand wheel for fine feed work
Built-in low voltage electrical equipment in column rear
Emergency STOP
Spindle turn selection switch
BF-35
Optional Equipment:
•
•
•
•
•
•
•
•
50% lower feed range
Digital read-out system for table
Electronic SERVO feed unit X/Y axes
Quick tool change nut for ISO-30
Cross slide table
Cycle start foot pedal • Foot pedal for reversing
Worklight with magnetic base
Coolant system with independent container
Page 2
Rotating machine head, rotates
45° left or right, for a wide range
of machining applications.
Standard Models
Auto feed reversing for tapping Models
BF-35
BF-35RS
Capacities:
1.38" (35mm)
1.57" (40mm)
Maximum milling capacity in steel
1.80" (45mm)
Maximum milling capacity in cast iron
3.20" (80mm)
1.18" (30mm)
1.3" (33mm)
Specifications:
Spindle taper
ISO-30
Optional spindle taper (on request)
4MT
Quill diameter
2.95"
(75mm)
7.87"
(200mm)
Main motor power
1.5/2 Hp
.12 Hp
Head geared-motor power
.1 Hp
(.09Kw)
F
G
Y
(.07Kw)
Number of speed (see speed charts)
18
Number of automatic feeds
3
(mm/rev.)
A
(1.1/1.5Kw)
Coolant pump motor power
Auto feed range in./rev.
D
EC
B
.0039/.0079/.118
(.1/.2/.3)
Height (A)
Overall length (B)
81.9"
(2130mm)
57.1" (1450mm
Spindle to table (C)
Minimum
Maximum
0"
23.23"
(590mm
15.08"
(383mm)
Maximum head height (E)
94.5"
Worktable width (F)
14.17" (360mm)
Worktable height (G)
35.43"
(900mm)
Worktable length (H)
47.24"
(1200mm)
Base width (I)
29.53"
(750mm)
Overall width (J)
61.81"
(1570mm)
X travel
27.56"
(700mm)
Y travel
14.17"
(360mm)
(2400mm)
Net weight
2,756 lbs
(1250Kg)
Shipping weight
3,197 lbs
(1450Kg)
X
H
I
J
67" x 67" x 95" (1.7x1.7x2.4m)
“RS” models are equipped with automatic feed reversing system for tapping.
Standard motor: 1800/3600 rpm
Model
BF-35
95-135-190-267-380-534-750-1065-1500
190-270-380-534-760-1070-1500-2130-3000
Page 3
Series PGeared-drive
Prismatic-column Drills
With Electromagnetic Clutch
Automatic Feed Control
The P series Industrial Drilling Machines are built
with an extra heavy-duty base and worktable to
handle large and heavy work pieces.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drilling capacity in steel: 2.75" (70mm) maximum
Tapping capacity in steel: 2.51" (64mm) maximum
Tapping capacity in cast iron: 2.68" (68mm) maximum
Automatic feed reversing system for tapping
on “RS” models
Adjustable vertical position of head by geared-motor
Large worktable with 3 T-slots
Hardened and ground high quality steel gears
Gear box lubrication by automatic pump
Guide ways lubricated by manual pump
Speed plate and selecting levers on front of head
Coolant tank and pump in machine base
Automatic feed and cut-off by electromagnetic clutch
Work light
Front hand wheel for fine feed work
Built-in low voltage electrical equipment in column rear
Emergency STOP
Automatic tool ejector
Forward and reverse turn push buttons
Optional Equipment:
• Automatic pitch control tapping with single speed brake motor
• Automatic pitch control tapping with pneumatic rapid approach
• Master guide spindle and nut set for automatic pitch
control tapping
• Pneumatic counterbalance with rapid approach and retract
for tube and and profile drilling
with pitch controlled tapping
• 50% lower feed range • Mechanical spotface device
• Pneumatic counterbalance • Multi-spindle head guide rod
• Union, dragging cone and assembly for multi-spindle head
• START-STOP and emergency STOP pendent control
• Pendant control panel with all functions • Cross slide table
• ISO-40 spindle with quick change nut (models BP-40,50,70)
• ISO-50 spindle with quick change nut (models BP-70 only)
Page 4
BP-70L
All SeriesP models
are supplied with
side protection
panels with front
doors except those
equipped with a
cross table.
View of left side of machine head showing
lifting equipment, stroke microswitches and
automatic lubrication pump for the guides.
Standard Models
Auto feed reversing for tapping Models
Capacities:
Specifications:
Spindle taper
Spindle taper (optional upon request)
Quill diameter
Main motor power
Coolant pump motor power
Head geared-motor power
Number of speed (see speed charts)
Number of automatic feeds
Auto feed range in./rev. (mm/rev)
Height (A)
Base length (B)
Spindle to Table (C)
Minimum
Maximum
Maximum head height (E)
Worktable width (F)
Table height (G)
Worktable length (H)
Overall width (I)
Net weight
Shipping weight
BP-40
BP-40RS
BP-50/50L
BP-50RS/50LRS
1.57" (40mm)
1.97" (50mm)
1.30" (33mm)
1.57" (40mm)
4MT
ISO-30
2.95" (75mm)
7.87" (200mm)
3 Hp (2.2Kw)
.12 Hp (.09Kw)
1 Hp (.7Kw)
9
3
.0039/.0079/.0118 (.1/.2/.3)
85.8" (2180mm)
52" (1320mm)
1.97"
2.36"
1.65"
1.97"
BP-70/70L
BP-70RS/70LRS
2.76"
3.14"
2.51"
2.68"
(50mm)
(60mm)
(42mm)
(50mm)
(70mm)
(80mm)
(64mm)
(68mm)
4MT
5MT
ISO-40
ISO-40/50
3.46" (88mm)
3.54" (90mm)
9.06" (230mm)
10.24" (260mm)
5.5 Hp (4Kw)
10 Hp (7.3Kw)
.12 Hp (.09Kw)
.12 Hp (.09Kw)
1.5 Hp (1.1Kw)
1.5 Hp (1.1Kw)
9
12
6
6
.0039/.0079/.118/.157/.197/.236 (.1/.2/.3/.4/.5/.6)
97.2"/122.8" (2470/3120mm)
55.9"/58.6" (1420/1490mm)
103.1"/122.8" (2620/3120mm)
62.6"/64.6" (1590/1640mm)
7.09" (180mm)
11.02"/25.6" (280/650mm)
33.07" (840mm)
39.4"/64.9" (1000/1650mm)
15.75" (400mm)
18.7" (475mm)
96.5" (2550mm) 108.3"/133.9" (2750/3400mm)
19.69" (500mm)
23.62" (600mm)
27.56" (700mm)
27.56" (700mm)
23.62" (600mm)
27.56" (700mm)
35.43" (900mm)
39.37" (100mm)
2,425 lbs (1100Kg) 3,086/3,527 lbs (1400/1600Kg)
2,866 lbs (1300Kg) 3,527/4,078 lbs (1600/1850Kg)
40" x 55" x 91" (1x1.4x2.3m) 48" x 107"/130" x 79" (1.2x2.7/3.3x2m)
9.06"/23.6" (230/6000mm)
43.3"/63" (1100/1600mm)
20.67" (525mm)
120.1"/139.8" (3050/3550mm)
27.56" (700mm)
27.56" (700mm)
35.43" (900mm)
47.24" (1200mm)
4,078/4,629 lbs (1850/2100Kg)
4,630/5,291 lbs (2100/2400Kg)
56" x 111"/130" x 79" (1.4x2.8/3.3x2m)
“RS” models are equipped with automatic feed
reversing system for tapping.
Standard motor:
1800 rpm
Model
BP-40
A
E
D
C
H
F
G
B
95-135-190
267-380-534
750-1065-1500
BP-50/50L 66-91-133
206-288-418
617-866-1255
BP-70/70L 62-81-104-133
191-250-321-410
532-683-878-1120
Optional spindle motors
Model
BP-40
BP-40
BP-40
BP-40
Motor
1200 rpm
3600 rpm
900/1800 rpm
1800-3600 rpm
Speed range
63-1000 rpm
190-3000 rpm
47-1500 rpm
95-3000 rpm
BP-50/50L
BP-50/50L
BP-50/50L
BP-50/50L
1200 rpm
3600 rpm
900/1800 rpm
1800-3600 rpm
46-878 rpm
132-2510 rpm
33-1255 rpm
33-2510 rpm
BP-70/70L
BP-70/70L
BP-70/70L
BP-70/70L
1200 rpm
3600 rpm
900/1800 rpm
1800-3600 rpm
40-748 rpm
124-2440 rpm
31-1120 rpm
62-2240 rpm
I
Page 5
SeriesP
Prismatic-column Multiple Head Drills
Clausing IBARMIA Prismatic-column Multiple
Head industrial drilling machines are
mounted to extra heavy-duty base. The
slotted table offers greater ease in positioning
and handling bulky and heavy workpieces.
Multiple Head drilling machines are ideal for
work where the workpiece requires more than
one operation. Each drill head on a multiple
head drill can be equipped differently to
perform the operation required by that head
such as... (automatic drilling cycle, automatic
tapping or any of the equipment offered).
In many cases where production of several
pieces are required, the Multiple Head drills
are more productive than machining centers
at a much lower cost.
4BP-40
Page 6
3BP-50
Multiple Spindle Models, Size and Dimensions
Size
Models
A
B
C
min.
D
E
F
G
L
M
N
max.
2 Head Drills
2BP-40
31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 37.4"(950mm) 49.2"(1250mm) 21.7"(550mm)
2BP-50
37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 37.4"(950mm) 49.2"(1250mm) 21.7"(550mm)
2BP-70
3 Head Drills
3BP-40
31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 59"(1550mm) 70.9"(1800mm) 21.7"(550mm)
3BP-50
37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 59"(1550mm) 70.9"(1800mm) 21.7"(550mm)
3BP-70
41.3"(1050mm) 103"(2820mm) 59"(14900mm) 9.1"(230mm) 43.3"(1100mm) 20.6"(525mm) 120"(3050mm) 19.69"(500mm) 27.6"(700mm) 65"(1650mm) 77"(1950mm) 23.6"(600mm)
4 Head Drills
4BP-40
4BP-50
37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 81"(2050mm) 92.5"(2350mm) 21.7"(550mm)
4BP-70
5 Head Drills
5BP-40
31.5"(800mm) 86"(2180mm) 50"(1270mm) 7.1"(180mm) 33.1"(840mm) 15.7"(400mm) 96"(2450mm) 15.7"(400mm) 27.6"(700mm) 102.3"(2600mm) 114"(2900mm) 21.7"(550mm)
5BP-50
37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 102.3"(2600mm) 114"(2900mm) 21.7"(550mm)
5BP-70
6 Head Drills
6BP-40
6BP-50
37.4"(950mm) 97"(2470mm) 51"(1320mm) 11"(280mm) 39.4"(1000mm) 18.7"(475mm) 108"(2750mm) 15.7"(400mm) 27.6"(700mm) 124"(3150mm) 136"(3450mm) 21.7"(550mm)
6BP-70
Multiple Spindle Dimensional Drawings
N
N
N
N
N
A
E
D
C
L
F
G
M
B
Page 7
SeriesF/P
Prismatic-column Optional Equipment
Model
Description:
7044
7022
PST
PSR
MH-4
Coolant System with separate tank (all models)
Worklight with magnetic base (all models)
Cycle or spindle turn START foot pedal
Spindle reverse foot pedal (for tapping)
Cross Slide Table 27.56" x 14.17" (BP-40, BP-50, BP-70)
SeriesF
AR-F
LDG-F
SERVOX-F
SERVOY-F
TCR-F
50% lower feed rate range
Digital read-out system (2-axis), for MH-4 cross table
Servo feed X axis
Servo feed Y axis
Quick tool change nut for ISO-30
SeriesP
RPF-P
Automatic pitch controlled tapping with single speed brake-motor
RPF-ANR-P Automatic pitch controlled tapping with pneumatic rapid approach
HGP-P
Master guide spindle and nut set for automatic pitch
controlled tapping
ACNL-P
Pneumatic counterbalance with rapid approach and retreat
ACNL-S-P Pneumatic counterbalance with rapid approach and retreat for
tube and profile drilling
ACNL-RPF-P Pneumatic counterbalance with rapid approach and retract with
pitch control tapping
AR-P
50% lower feed rate range
DLM-P
Mechanical spotface device
CN-P
Pneumatic counterbalance for spindle return
UN-P
Union, dragging cone and assembly for multi-spindle head
GM-P
Multi-spindle head guide rod
PM-P
Start-stop and emergency stop pendent control
PMC-P
Pendent control panel
ISO 40 P
ISO-40 spindle with quick change nut (BP40, BP50, BP70)
ISO 50 P
ISO-50 spindle with quick change nut (BP70)
PST
Cycle or spindle turn START
foot pedal
PSR
Spindle reverse foot pedal
(for tapping)
RPF
Automatic pitch controlled
tapping with single speed
brake-motor. (for SeriesP models)
SERVO X
SERVO Y
Electronic “SERVO” feed unit
for X/Y axes.
Feed range: .79 to 39.37 in/min
Rapid feed: 39.37 in/min
Available for MH-4 cross table
Page 8
RS
Automatic feed reversing
system for tapping
(standard on SeriesF/P
-RS models)
RPF-ANR
Automatic pitch controlled
tapping with pneumatic rapid
approach. (for SeriesP models)
CN
Pneumatic counterbalance for
spindle return, recommended for
multi-spindle head applications.
(for SeriesP models)
ACNL
Pneumatic
counterbalance for
automatic drilling
cycle with rapid
approach, working
feed and rapid
retreat.
(for SeriesB models)
ACNL-S
Pneumatic
counterbalance for
automatic drilling
cycle with two rapid
approaches, and
rapid retreat, for
tube and profile
drilling.
(for SeriesB models)
Assembly for Multi-Spindle Heads
ACNL
ACNL
Automatic drilling cycle with rapid
approach, working feed and rapid
retract, with additional pneumatic
counterweight function for the
multi-spindle head.
UC
Union, dragging cone and
assembly of the multi-spindle
head.
CM
Multi-spindle head with fixed or
adjustable spindle.
UC
GM
PM
LDG
Digital read-out system.
Available for MH-3 and MH-4 cross
table
CM
GM
Multi-spindle head guide rod.
PM
START/STOP and emergency
STOP control extension.
Cross Slide Tables
SeriesP for models BP-40, BP-50, BP-70
MH-4 Cross Slide Table
X Travel = 27.56"
Y Travel = 14.17"
Table net weight 661 lbs.
Page 9
Your Single Source for Machine Tools
Clausing Precision Drills
Clausing Precision Mills
Clausing Precision Lathes
■ Clausing Belt-drive Drills
■ Clausing Geared-head Drills
■ Clausing Radial Drills
■ Clausing Bed Mills
■ Clausing CNC Bed Mills
■ Clausing Knee Mills
■ Clausing EVS Knee Mills
■ Clausing/Colchester Geared Head Lathes
■ Clausing/Colchester Professional V.S. Lathes
■ Clausing Large Swing Standard and CNC Lathes
■ Clausing/Metosa Standard and CNC Lathes
Clausing Precision Grinders
Clausing Precision Cutting Machines
■ Clausing Manual Grinders
■ Clausing 2 & 3 Axes Hydraulic Grinders
■ Clausing ASDll Automatic Grinders
■ Clausing ASDlll Automatic Grinders
■ Clausing/Kalamazoo Horizontal Bandsaws
■ Clausing/Kalamazoo Vertical Bandsaws
■ Clausing/Kalamazoo Tilt Frame Miter Bandsaws
■ Clausing/Kalamazoo Cold Saws
For detailed catalogs of the full line of Clausing Machine Tools visit our Web Site:
or e-mail us and request an electronic (pdf) catalog at:
info@clausing-industrial.com
Your Authorized Clausing Precision Machine Tools Distributor
1819 North Pitcher Street
Kalamazoo, Michigan 49007-1886
Phone: 269-345-7155
Fax: 269-345-5945
Information: info@clausing-industrial.com
Issued 07-2010
Call Toll Free: 800-323-0972
or visit our website

Brochure - Selway Machine Tool Co.

Transcription

Similar documents

Clausing Industrial

Brochure - UNIC Cranes Europe

SPECIFICATIONS McCloskey R70

winter stocktake