Our Catalog - Low Cost Manufacturing

Transcription

Our Catalog - Low Cost Manufacturing
The Best Source For
Washer & Dryer Parts For:
-Coin - Op Distrbutors
-Route Operators
-OPL Distributors
516.997.9866 - 800.761.8230 - Fax 516.997.9890
318 Westbury Avenue - Carle Place, NY 11514 - P.O. Box 147
Visit us on the web at www.lowcostmfg.com
INDEX
Click menu item to jump to page
FOR :
COIN – OP SECTIONS
PAGES
Alliance – Huebsch, Speedqueen & Unimac - - - - - - American Dryer Corp- - - - - - - - - - - - - - - - - - - - - - - - - Belts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Books, Repair- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Casters For Laundry Carts - - - - - - - - - - - - - - - - - - - - Clamps, Hose- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Cissell- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 – 29
30 – 33
34 – 36
37
38
88
39
Dexter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Fuse thermostats, Dryer- - - - - - - - - - - - - - - - - - - - - - General Electric, Dryer, Washer (o.s.), - - - - - - - - - - - Washer (Direct Drive)
Greenwald- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hoses, Drain- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hoses, Fill- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Huebsch, Alliance, Dryer Stack- - - - - - - - - - - - - - - - - IDC, Cissell- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ignitors & Sensors, Dryer – - - - - - - - - - - - - - - - - - - - - Installation Accessories- - - - - - - - - - - - - - - - - - - - - - Ipso- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Laundry Accessories- - - - - - - - - - - - - - - - - - - - - - - - - Laundercenter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Maytag - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Milnor- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
40 – 44
45
46 – 57
Primus - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ram Electronics- - - - - - - - - - - - - - - - - - - - - - - - - - - - Speedqueen– Alliance- - - - - - - - - - - - - - - - - - - - - - - - Switches - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Switches, Limit, Dryer- - - - - - - - - - - - - - - - - - - - - - - - -
98
97
21 – 26
5, 21, 28, 33, 77 & 90
45
Tapes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Unimac – Alliance- - - - - - - - - - - - - - - - - - - - - - - - - - - Valves, Water Fill, Repair Kits & Parts- - - - - - - - - - - Valves, Water Fill, Washer- - - - - - - - - - - - - - - - - - - - Venting, Dryer- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wascomat- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Whirlpool Direct Drive – Washers- - - - - - - - - - - - - - - Whirlpool – Dryers- - - - - - - - - - - - - - - - - - - - - - - - - - - -
99
27 – 29
28 – 29
101 – 104
87
105 – 115
116 – 117
118 – 122
58 – 79
83 – 84
86
1 – 20
80 – 81
82
83 – 88
40 – 44
40
40 – 44
89 – 94
95 – 96
FOR ALLIANCE – HUEBSCH
M414704
MOTOR
CAPACITOR
M400329
SENSOR
RED RESET BUTTON
FOR O.S. BASO, JOHNSON
CONTROLS PILOT
STANDING GAS VALVES
REPLACES M400767 &
M400329
108-130MFD
233-280MFD
NEW
ITEM
115V.
METAL SPROCKETS
M400090
M400091
1” BORE
FOR 50 lb.
MODELS
REPLACES
DT1331B
3/4” BORE
30 lb. MODELS
REPLACES
DT1331C
M401366
M401365
430260
METAL DRIVE SPROCKET
BEARING
FOR
TWINSTAR
SPIDER
NEW
ITEM
NYLON SPROCKETS
DRIVE SPROCKET
REPLACES TW623-3
M401425
M401369
IDLER SPROCKET
REPLACES TW627-3
DRIVE CHAIN
REPLACES ST118
FOR HYDRY 16 lbs.
LOADSTAR 30 lbs.
AND 37 AB 50lbs.
USED WITH M40090 & M400091
SPROCKETS
M401349
TRUNNIONS / SPIDERS
M401055
30 lb. SPIDER ONLY
REPLACEMENT FOR 30 LB.
LOADSTAR 1 & 2 MODELS WITH
SERIAL # TT83892 THROUGH
PRESENT. WILL ALSO REPLACE
OTHER SERIAL # DRYERS WHEN
CHANGING TRUNNION HOUSING TO
# M401349
REPLACES TT18-2
NEW
M406073
ITEMS
M4638P3
50 lb. INCLUDES 2
BEARINGS
REPLACES M400519P
TRUNION HOUSING
WITH BEARINGS
FITS ONLY MODEL 30/30
LOADSTAR 30 lbs.
AFTER SERIAL # T83892
NEW
ITEM
30 lb. FOR
LOADSTAR 3
SPIDER ONLY
430219
STACK MODELS
USED WITH M401055
TRUNNION / SPIDER
1
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE – HUEBSCH
ADJUSTABLE THERMOSTAT
MOTOR PULLEYS
M402718 50 lb. BORE SIZE
M400778
3/4” USED WITH X602 1/2 HP
MOTOR REPLACES ST130
USED ON ROUND COIN METER
MODELS REPLACES HT262-1
& TT262-1. 106” CAPILLARY TUBE.
REPLACES # M400243,
M401249, ST262-1
BORE
M401183 30 lb. BORE SIZE
5/8” USED WITH X601 1/3 HP
MOTOR REPLACES HT116-1 &
TT130
M400527
RESISTOR
M400780
USED ON SQUARE COIN
METER MODELS REPLACES
# TT262-4, M400779 & M401251
X601
DRIVE MOTORS
1/3 HP, 115/230V
FOR 16 – 20 & 30 LB.
GAS DRYERS
REPLACES 4048,
M400383, M400379
& M409438
X602
1/2 HP, 115/230V
FOR 50 LB.
GAS DRYERS
MANUFACTURED BY MARATHON
INDIVIDUALLY BOXED
CAPACITOR START.
REPLACES 4014
& M400390
X603
3/4 HP, 115/230V
REPLACES M400394
& M41191
M400086P
FAN
M400092
430019-0
LARGE PULLEY
REPLACES DT1332
DRUM ROLLER
WITH BALL BEARING
FOR STACK TWINSTAR MODELS
FOR
ABOVE
MOTORS 1
DRUM
FOR 1
DRUM
MODELS
NEW
ITEM
15 1/4”
2
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
BALL BEARINGS
IDLER HOUSING BEARING
M400592
FITS IDLER HOUSING ST55-1 FOR
30 LB. LOADSTAR & 37AB.
TRUNNION HOUSING BEARINGS
M401356
FOR 30 LB. LOADSTAR FROM SERIAL
#’s TT100 to TT83891.
M401357
FOR 30 LB. LOADSTAR FROM SERIAL
#’s TT100 to TT27288.
CROSS REFERENCE
M401385
OLD #
ST108
M413921
M413923
M413924
M413922
430038
WA107
WA109
MODEL 30/30 LOADSTAR ( 30 LBS. )
AFTER SERIAL TT83892 TO PRESENT.
FITS ALL 37SB ( 50 LBS. )
M401386
FOR MODEL 37AB ( 50 LB. DRYER ONLY )
M406824
FOR 75 lb. MODELS
NEW #
M400592
M401385
M406824
M406826
M401386
M400592
M401385
M401386
NEW
ITEM
M406826
FOR 75 lb. MODELS
FOR STACK DRYER SPIDER BEARING REAR 430260
MOTOR OVERLOAD RESET SWITCH
WHITE LENS, INDICATOR LIGHTS
M400701 ROUND, 110V
M400702 ROUND, 220V
M404151 ROUND, 110V
M400716 10 AMP
REPLACES ST181-10 &
ST181-9
M400704 SQUARE, 220V
M400718 5 AMP
REPLACES ST181-5
M400703 SQUARE, 110V
CROSS REFERENCE
OLD #
ST163
ST163-1
ST163-2
ST163-3
M400719 9 AMP
3
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW #
M400701
M400702
M400703
M400704
FOR ALLIANCE – HUEBSCH
IDLER HOUSINGS & SHAFT
CROSS
OLD #
DT3002F
M412103
M412103P
M412223
M412228P
M400506
M401326
M412103
M412103P
M412228
M412228P
M400142
M400142
M400142
M400505
M400505
M400505
M400505
M400142
M400142
M400505
M400505
NLA
FROM
OEM
M401373
NEW #
IDLER SHAFT
M400505
M400142
COMPLETE ASSEMBLY NLA HOUSING ONLY DOES
FROM NOT INCLUDE
FITS MODEL
OEM BEARINGS OR IDLER
LOADSTAR & 50LBS.
INCLUDES BEARINGS
SHAFT
AND IDLER SHAFT.
NLA
FROM
OEM
REPLACES M412223,
TW635-1 & TW635-2
FOR M400505
ASSEMBLY
JOHNSON CONTROLS – BASO GAS VALVES & COMPONENTS
M401228 115V
M401229 220V
M402750 115V
M401224 24V
M400797
NEW
ITEM
CORK GASKET
FOR BASO RESET
M400798
CORK & RUBBER GASKET
FOR BASO COIL
REPLACES ST282-2
CROSS REFERENCE
BASO – JOHNSON CONTROLS
BLUE BASO COIL 230V
FOR STANDING PILOT LIGHT MODELS
REPLACES M400769
M401226
M406217
MAIN COIL 25V
PILOT COIL
M401227
CROSS REFERENCE
OLD #
M400321
COIL KIT 115V REPLACES LT166-1
INCLUDES 2 BLUE WIRES
M400322
COIL KIT 230V, REPLACES LT166-2
& ST252, INCLUDES 2 BLUE WIRES
NEW #
M4320P3
M401214
M4321P3
M401215
M401228
M401228
M401229
M401229
BASO – JOHNSON COILS
M400331
BLUE COIL 120V FOR STANDING
PILOT LIGHT MODELS
REPLACES M400330
OLD #
NEW #
M4310P3
M4311P3
ST251
LT166-1
ST252
LT166-2
M400765
M4310P3
LT251
LT252
M400769
M400321
M400321
M400321
M400321
M400322
M400322
M406217
M406217
M406217
M400331
M400331
4
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE – HUEBSCH
SWITCHES
M406103
4 TERM.
DOOR SWITCH
1 1/4” BODY
430542
M406119
DOOR SWITCH
15/16” BODY
M400952
38C058
DOOR SWITCH
ROTARY COIN SWITCH,
FOR DROP COIN METER
TRANSFER
YOUR OWN
LEVER.
VARIES WITH
M406313
2 TERM. DOOR SWITCH
1 1/4” BODY
CROSS REFERENCE
M400939
OLD #
M400949
M400950
T183-37
T183-57
M400949
M400950
T183-77
T183-56
T183-69
T183-29
430542
DOOR SWITCH
FITS ALL UP TO 1970
M400944
AIR FLOW SWITCH
M400955
TEMPERATURE SWITCH, RED
3 POSITION. –HI –MED. –LOW
NEW #
M400956
M400956
M400944
M400947
M400954
M400954
M400954
M400001
M400952
M400939
M406119
M400956
SWITCH SELECTOR, RED
2 POSITIONS
NORMAL & PERMANENT PRESS
M400954
M400945
O.S. PERMANENT PRESS
SELECTOR SWITCH
SWITCH
PUSH TO START
430540
LINT DOOR SWITCH
NUT MOUNT STACK MODELS
M400947
M400001
“B” SWITCH, COIN METER
COOL DOWN SWITCH
PERMANENT PRESS
“A” SWITCH, COIN METER
FOR PERMANENT PRESS METER.
REPLACES 9128-1, 00-6003
& 00-6163
NEW
ITEM
25 AMP
5
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
25 AMP
FOR HUEBSCH
HT269
M401257
M400244
SAFETY, 200, BLUE
REPLACES TT269-20
THERMOSTATS
M401258
M401254
LOW, 140, WHITE
REPLACES TT269-14
430387
HIGH LIMIT THERMOSTAT
WHITE CERAMIC BASE
INCLUDES 2 SCREWS
FOR STACK MODELS
SAFETY, 220, BLUE
REPLACES TT269-22
M401404
M401255
MEDIUM 160,
ORANGE TT269-16
M409433
M401256
M400244
HIGH 180 TAN
REPLACES TT269-18
NEW
ITEM
CROSS REFERENCE
HT269
OLD #
NEW #
TT269-14
TT269-16
TT269-18
TT269-20
TT269-22
M401254
M401255
M401256
M401257
M401258
MONEY & COIN BOXES
M400489
COIN BOX
O.S.
FOR LOADSTAR 30/30
( 30 lb. ) & 37AB ( 50 LBS. )
MODELS UP TO 1970.
M400490
FLAT FACE SECURITY BOX
FOR LATE MODELS.
REPLACES M402581, M402582 & ST44-5
WIDTH
2 1/2”
WIDTH
3.515”
USED WITH
M401581 LOCK
LENGTH
4.0”
LENGTH
7”
HEIGHT
2.375”
HEIGHT
2 1/2”
M401223
70186701
430884P
DOOR LATCH
GAS VALVE COIL – 24 VOLTS
KIT, SWEEP SHEET
WITH SPRINGS
NEW
ITEM
NEW
ITEM
6
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
70260101
COIL FOR VALVE
NEW
ITEM
FOR ALLIANCE – HUEBSCH
IGNITORS & RELATED PARTS
M413532
M406789
IGNITOR
CONTROL BOX.
FOR LATE MODEL
STACK & SINGLE
DRUM DRYERS
ELECTRONIC
IGNITOR BOARD
WITH RED
INDICATOR LIGHT
FOR STACK
SINGLE DRUM
NEW
ITEM
NEW
ITEM
HIGH VOLTAGE WIRE FOR
ELECTRONIC IGNITORS LENGTH = 30”
M406881
M406788
N412571
30”
55438
M402743
ROUND GLO BAR
FOR LATE MODELS
1981 & UP
M406934
BP202B
FOR CDS1, CDS2 & QDK1
PACKED
12 PER BOX,
144 PER CASE
48”
M412991
GAS DRYER SENSORS
M402742
M406366
56231
LATE STYLE ROUND
TERMINAL
M402745
IGNITOR BRACKET
USED WITH # M402743 GLO BAR,
REPLACES M406206
USED W / 55438 GLO BAR
COMPUTER OVERLAYS
70260101
COIL FOR GAS VALVE
431297
UPPER
431298
LOWER
7
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
LOCKS
77-1047-18 W/FLAT KEY
LOCK & KEY MEDICO
FOR ST44-1 BOX. 7 7/8” LONG ( END
TO END ). FOR MODELS 30/30
LOADSTER 30# &
37AB (50#) UP TO 1971.
USED WITH M400489 BOX
AND ORIGINAL M400490 BOX
REPLACES ST185-1 LOCK.
M404101
PANEL LOCK
HMV10 CODE
REPLACES ST185 & M401405
M401581
W/ROUND KEY
COIN BOX LOCK & KEY, ROUND
TYPE USED WITH ST44-1 BOX. 7 7/8”
LONG END TO END. FOR MODELS
30/30 LOADSTAR, 30LB. & 37AB, 50
LBS. UP TO 1971
REPLACES ST185-1
USED WITH M400489 COIN BOX
430429
TWINSTAR
PANEL LOCK & KEY
7 7/8”
NEW
ITEM
431028
NEW
ITEM
LOCK & KEY,
FOR MONEY BOX TWINSTAR
PIN TYPE 1/4” TURN
M400725
DUMMY LOCK WILL TAKE KEY
# HMV1 THRU # HMV25; NO TUMBLERS.
FOR USE AS A LATCH ONLY –
SCREWDRIVER. REPLACES ST189
11 1/4”
ALL ABOVE LOCKS INCLUDE
HEX MOUNTING NUT
8
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
BELTS
BELT
STYLE
COG
430054
MV
430104
MV
M400315
V
M400607
V
M400222
MV
M411424
MV
M411425
MV
M411814
V
M400608
MV
M406083
V
M406386
V
M401182
V
M412981
MV
70053105
MV
70276203
MV
70053103
MV
70053104
MV
762762203
PART #
COGGED
BELT
NEW
ITEM
V BELT
NEW
ITEM
CROSS REFERENCE
NEW
ITEM
OLD # NEW #
LT128
LT128-1
ST128
TT128
HT128
MULTI V
BELT
M400315
M400315
M400607
M401182
M400222
LINT SCREENS & LINT CARPET
SQUARE LINT SCREENS
M400522
24 X 24”
WELDED WIRE
FRAME – GALVANIZED
FINE MESH.
FITS: 24” X 24”
LOADSTAR 30 LBS.
1 & 2 AND 37AB (50 LBS.)
REPLACES ST73
M409717
BAG FOR 120 lb. MODELS
STACK MODEL LINT
SCREENS WITH BEND
431215
24”
24”
NEW
ITEM
18 1/2”
FOR TWINSTAR
STACK MODELS
50 PER CASE
NEW
ITEM
M400523
20 X 20”
WELDED WIRE
FRAME – GALVANIZED
FINE MESH.
FITS MODELS HYDRY 16
LBS. & LOADSTAR 3 20” X
20” REPLACES ST73-1
20”
430482
19 1/2”
FOR TWINSTAR
STACK MODELS
50 PER CASE
20”
9
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
COIN METER MOTORS
PART #
M400609
M400611
M400612
M400613
M400614
RPM CENTER
SPEED VOLTS
60cy.
1/60
1/60
1/120
1/90
1/30
115
230
115
115
115
SQUARE FACE COIN METER
2 SWITCH MODEL
M401188
M401189
M401190
M401191
M405138
TT131 – 37
TT131 – 38
TT131 – 39
TO ORDER SPECIFY
COIN, TIMER, AND
VOLTAGE.
REPLACED BY 59-3200-15
STANDARD MODELS
1 SWITCH METER
ROUND FACE COIN METERS
PERMANENT PRESS MODELS
2 SWITCHES METER
M400617
ST131-11
M400628
M400618
M400627
ST131-37
TO ORDER SPECIFY
COIN, TIMER, AND
VOLTAGE.
REPLACED BY
59-3200-2
REPLACED BY
59-3100-23
M400745
M400726
FLAT ANTI – CHEAT
SPRING
FOR 5900 COIN METER
PACKAGED IN BAGS OF 12
KNOB SPRING RETURN
PACKAGED IN
BAGS OF 12
METER TIMING CAMS
PART #
M400734
M400735
M400736
M400737
M400738
M400739
M400740
M400741
M400732
M400733
# OF PINS
2
3
4
5
6
7
8
9
10
12
SAME SIDE HUB
AS PINS FOR TWIST
KNOB METERS
10
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
MANUAL TIMERS
M400785
15 MINUTES
FOR MOTOR ONLY
USE 50-61-45
115 VOLT
M400787
30 MINUTES
FOR MOTOR ONLY
USE 50-61-46
CROSS REFERENCE
OLD #
NEW #
ST260-15 M400785
ST268-30 M400787
ST268-60 M400791
M400788 M400787
M400789 M400791
M400790 M400787
M402105 M400785
M402106 M400787
M402107 M400791
M400791
60 MINUTES
FOR MOTOR ONLY
USE 50-61-1
M409997
M405897
M400934
FUSE, 6 AMP
DIODE LOGIC BOARD
FOR GLO BAR MODELS
THERMCOUPLE, 18”
FITS ALL BASO
STANDING PILOT MODELS
NEW
ITEM
M401204
NARROW O.S.
FOR LOADSTAR # 30
& AB 50
REPLACES TT140-1 &
ST140-1
GLASS GASKETS
DOOR GASKETS
LATE STACK
70211601 WIDE
M406129
WIDE
REPLACES M402090
SIDE
VIEW
M400962
GASKET FOR 20” GLASS
FOR LATE MODELS, 1970 & UP
REPLACES T275-5
SIDE
VIEW
11
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
CONTACTORS
N.S. COIL
WHITE RODGERS
M400904
NEW
ITEM
40 AMP 240V
M400905
M405430
CAP ASSEMBLY 120V. COIL
FOR 36C90A – 207 W/R GAS
VALVE USED ON 30, 50, &
65LB.
DRYERS. 1981 & UP
REPLACES M411134
40 AMP 240V
M400910
30 AMP 240V
M400913
30 AMP 120V
M405116
40 AMP 120V
O.S. GAS VALVE COILS & COIL KITS, WIRED
M406209
NEW
ITEM
COIL KIT, COMPLETE WIRED
FOR K VALVE SERIES
GLOW BAR IGNITION MODELS
3 SPLIT COIL TYPE
REPLACES 56225A
M409253
COIL ASSEMBLY
FOR SINGLE INPUT K VALVE
INSTANT ELECTRONIC IGNITION
MODELS USED WITH M406789
ELECTRONIC IGNITOR 2 SOLID
COIL TYPE
NEW
ITEM
SEPARATE COILS FOR ABOVE
M406211
430690
BOOSTER COIL
COIL ASSEMBLY
FOR DUAL K VALVE
GLOW BAR IGNITION MODELS
3 SOLID COIL TYPE
M406210
HOLDING COIL
NEW
ITEM
M406212
SECONDARY COIL
12
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
PARTS FOR STACK DRYER
430019
430054
M406129
430104
ROLLER WITH BEARING
REPLACES 70052601
COGGED BELT
DOOR GASKET
DRUM BELT
70053103
70276203
430429
430219
430540
430542
PANEL LOCK, STACK #10
DRUM SPIDER
LINT DOOR SWITCH
DOOR SWITCH
REPLACES 70101001
NEW
ITEM
431028
430260
M406789
M413118
LOCK & KEY TWINSTAR
SPIDER BEARING
BOARD IGNITOR
2 AMP. GLASS FUSE
NEW
ITEM
430387
STACK SAFETY
M413532
IGNITOR
CONTROL BOX.
FOR LATE MODEL
STACK & SINGLE
DRUM DRYERS
NEW
ITEM
430038
BEARING
M406789
NEW
ITEM
ELECTRONIC
IGNITOR BOARD
WITH RED
INDICATOR LIGHT
FOR STACK
SINGLE DRUM
13
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
DRIVE, CYLINDER & TRUNION SYSTEM
FOR 32DG STACKED DRYERS
430884P
SWEEPSHEET
WITH SPRING
NOT SHOWN
14
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEMS
FOR HUEBSCH
GAS VALVE ASSEMBLY
FOR 32DG STACKED DRYERS
15
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
MOTOR, MOUNTS AND GUARDS
FOR 32DG STACKED DRYERS
16
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
FAN AND HOUSING ASSEMBLY
FOR 32DG STACKED DRYERS
17
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
COIN METERS, SINGLE AND DUAL
FOR 32DG STACKED DRYERS
18
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
MICROPROCESSOR
FOR 32DG STACKED DRYERS
19
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR HUEBSCH
LOADING DOOR AND SWITCH ASSEMBLY
FOR 32DG STACKED DRYERS
20
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
BELTS
BRANDED EXACT V BELT
37820
38174 REPLACES 40053601 & 40053606
27246
28808
27001006
27001007
40053601
40053606
40053607
510178
52556
59174
55060
55059
56095
40051502
40111201
COGGED V BELTS
BRANDED
20185
20186
20895
23758
23759
27155
28043
51994
81064
81459
MULTI V BELTS, BRANDED
SWITCHES
SWITCH WITH ARM
SQUARE DOOR SWITCHES
FOR LATE DRYERS – 3 TERM.
27249
53236
56052
62872
504570
70107001
NUT MOUNT SWITCH
23540
FOR ALL FA & DA MODELS & SOME
MA MODELS
58813
55882
SELECTOR
SWITCH
ASSEMBLY
SWITC
NEW
ITEM
51143
DRYER DOOR SWITCH, O.S.
33445
SWITCH FOR 2 & 3
SWITCH COIN MECH.
LID SWITCH
27612
21
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
PUMPS, PUMP KITS & COMPONENTS
40040301
DIRECT DRIVE PUMP
DOMESTIC & COMMERCIAL
REPLACES 36863P
31969
31968
DOMESTIC &
COMMERCIAL PUMP
DOMESTIC PUMP
NEW
ITEM
R9900467
R9900468
22506P
26594P
40004201P
RUBBER & GASKET ADHESIVE
SILICONE GREASE TUBE
UPPER TUB BEARING
LATE
MODEL
WASHERS
REPLACES 27182
27625
40038001
DOOR HINGE BUSHING
LID BUMPER
27626
DOOR HINGE
REPLACES 22507
COMPUTER OVERLAYS
431232
UPPER
431234
LOWER
22
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
PART # STYLE
31111
34601
34602
QD
QD
QD
WASHER QD TIMERS
CATEGORY
COIN-OP
COIN-OP
COIN-OP
WATER VALVES & COMPONENTS
27156
93026
FOR LATE MODELS
REPLACES 33930
DOUBLE VALVE 115V.
COMMERCIAL
M
OE C.
SPE
25832
25832-1
25833
25833-1
25964
38495
39069
LATE MODEL
WASHERS
DOMESTIC & COMMERCIAL
DOMESTIC & COMMERCIAL
MOTORS
38035P
27179P
58044
56075
115V.
2 SPEED WASHER
LATE DRYER
O.S. DRYER
NEW
ITEM
M
OE C.
SPE
NEW
ITEM
NEW
ITEM
M
OE C.
SPE
M
OE C.
SP E
495P3
40047202
38008
DRIVE BALL
SEAL KIT
TRANSMISSION PULLEY
DRIVE HELIX FOR
DRIVE PULLEY
R9900189
39508P
M
OE C.
SPE
NEW
ITEM
NEW
ITEM
NEW
ITEM
REPLACES 38223 & 38007
23
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
DRYER SHAFTS
56461
SHAFT, DRUM ROLLER
53132
DRUM SHAFT
NEW
ITEMS
51835
BLOWER SHAFT
53519
BLOWER SHAFT
53001
DRUM SHAFT
IDLER PULLEY
54414
510142
38225P
28615
61927
61928
PRESSURE SWITCH FOR
LATE MODELS FOR WA, HA,
& FA COMMERCIAL MODELS
CO
O
I
SP EM
OP N
EC
.
240 V
208 V
490P3
R9900489
FUSE KIT FOR ABOVE
HEATERS
55435
56223
IGNITOR
BRACKET
IGNITORS & SENSORS – OEM SPEC.
51018P
60868
40069801P
NEW
ITEM
IGNITOR NS ROUND
REPLACES
56408
56970
58823
369P3
GLO BAR, INCLUDES
MOUNTING BRACKET
55438
56231
GLO BAR
GAS DRYER SENSOR
24
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
NEW
ITEM
BEARINGS
510142
39661
IDLER PULLEY, DRYER
MOTOR CAPACITOR
WASHER
NEW
ITEM
28944
80430
430038
NEW
ITEM
DOMESTIC &
COMMERCIAL
REPLACES 37377
DRUM ROLLERS
BLOWER WHEEL FOR DRYERS
58813
56000
510139
O.S. SELECTOR SWITCH
56285
OLD STYLE
FOR GAS & ELECTRIC MODELS
NEW
ITEM
NEW
ITEM
62649P
OEM
SPEC.
NEW STYLE
REPLACES
56457 & 62649
548P3
735P3
BRAKE PAD KIT, 1 HOLE
FOR TOP LOAD MODELS
BRAKE PAD KIT, 2 HOLE
OEM
SPEC.
R000014
28807
LATE WASHER IDLER SPRING
NEW
ITEM
OE
SP M
EC
.
NEW
ITEM
3 PADS & 6
SCREWS PER
PACK
REPLACES
637P3
DOMESTIC & COMMERCIAL
61376P
REPLACES 37366
LINT FILTER FOR DRYERS
54415P
IDLER ASSEMBLY
NEW
ITEM
28293
55882
DRAIN HOSE
PUSH TO START
DRYER SWITCH
NEW
ITEM
25
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE SPEEDQUEEN
FILL HOSES
20617
20618
28330
28330P
8 FEET
10 FEET
4 FEET
5 FEET
3/8” ID HIGH PRESSURE
MADE IN USA “FIRST LINE”
36108
35874
SNUBBER PAD & ISOLATOR
34746
HOSE
LINE CORD, 8 FT.
N.S.
WASHER
NEW
ITEM
NEW
ITEM
FOR WATER VALVE
TUB FILL HOSE
503552
56088
61380
THERMODISC, GROUND
DRUM FRONT FELT SEAL
FRONT PANEL SEAL
N.S.
DRYER
NEW
ITEM
4 TERM.
23591
LID SWITCH GASKET
364P3
356P3
IDLER PULLEY KIT WITH BELT
SEAL & BEARING KIT
NEW
ITEM
N.S.
WASHER
NEW
ITEM
REPLACES R9900487
434P3
SNUBBER PAD KIT, WHITE FELT
4 PER
PACK
NEW
ITEM
26
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEM
FOR ALLIANCE UNIMAC
BELTS
PART #
TYPE
F280304
F280309
F280317
F280319
F280321
F280327
F280337
F280341
F280342
F280343
F280351
F280366
F280369
F280370
V
COG
V
V
V
V
V
V
V
V
V
MULTI V
MULTI V
MULTI V
MULTI V BELT
COGGED BELT
V BELT
F370426-1
COIN ACCEPTORS & COUNTERS
P.C. BOARD
MFG. BY GREENWALD
41-1038-5
COUNTER BOARD, 115V.
FOR 41-1040
REPLACES 25-1000
41-1045
ACCEPTOR ONLY
41-1040
ACCEPTOR & COUNTER, 115V.
INTERNAL SIDE VIEW
27
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE UNIMAC
SWITCHES
F340200
DOOR SWITCH
F340413
SELECTOR SWITCH
F340411
RED SWITCH
ROCKER TYPE
MANUAL CONTROL
F340919
DOOR LOCK SWITCH
F160558
COIN SWITCH
4 COIL VALVE 3 OUTLETS
F380715
4 COIL WATER VALVE
115V, 4 OUTLETS
F380795
24V.
F730455
115V.
DRAIN VALVES & MOTOR AND GEARS
FOR 18, 27 & 35 lb. WASHERS
F380618
F380619
115V.
230V.
2”
FOR 50 lb. WASHERS
MOTOR & GEARS
F380628
F380629
F380943 115V.
F380944 230V.
115V.
230V.
3”
F150352
CAP, OVERFLOW
28
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR ALLIANCE UNIMAC
WATER VALVE REPAIR KITS & DIAPHRAGMS
MUELLER
F380938
HAYS
KIT 10 MM.
F380939
F380914
VALVE REPAIR KIT 13MM.
FOR HOT & COLD WATER INLET
REPAIR KIT 1/2”
F380915
F380954
REPAIR KIT 3/4”
SHORT KIT 10 MM.
F380968
DIAPHRAGM FOR
F730455 & 6
F380969
DIAPHRAGM 13 MM.
F380970
MUELLER DIAPHRAGM
10 MM.
F200126
SOLENOIDS
DRAIN PINCH TUBE
F300113
F300100
F300112
DRAIN SOLENOID, 115V. DOOR LOCK SOLENOID DOOR SOLENOID, 115V.
F370225
UC188K
CAPACITOR
BEARING KIT ASSY.
RELAYS
F330146
F330147
USED ON
P.C. BOARD
FOR 18, 25, 35
& 50 lb.
MODELS
29
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR AMERICAN DRYER
FAN & DRIVE BELTS
THERMOSTATS
130100
130101
130103
130107
130109
130150
130301
130401
V BELTS
PART # STYLE
100130 STACK DRUM
100139 DRUM
100173 STACK DRUM
100111
100112
100113
100114
100115
100117
100144
100630
100171
100100
100101
100103
100105
100106
100107
100108
100109
BEARINGS
PILLOW BLOCK BEARINGS
OLD #
OLD #
NEW #
100202 BEARING, BLOCK, 1 3/8 “ 880202
100204 BEARING, BLOCK, 2 1/4 “ 880204
150º
180º
225º, AUTO RESET, HI LIMIT
160º
140º
200º
220º
325º, FLUSH MOUNT
100200
NEW #
BEARING,
880200
LENGTH:1 11/16 “, ID : 1/2 “, OD : 3/4
BRONZE
FLANGE BEARINGS
OLD #
NEW #
100203 BEARING, FLANGE, 1 3/8 “
880203
100214 BEARING, FLANGE, 5/8 “ 880214
100220 BEARING, FLANGE, 1 3/4 “ 880220
100225 BEARING, FLANGE, 1/2 “ 880225
TOUCHPADS
112514
FOR COIN MODELS WITH ROUND
FACE METER. AD15-50
112515
112526
112562
FOR PHASE 2,
COIN MODELS
ONLY AD15-50
UP TO 1985
COIN KEYBOARD
LABELFOR
PHASE 3 MODELS
FOR AD330
30
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR AMERICAN DRYER
MOTOR RELAYS
FUSES
131814
RELAY, MOTOR, 115V
136048
136052
FUSE, 125 AMP, FOR 330 STACK
136057
136058
FUSE, .05 AMP
FUSE, 4 AMP, SLO BLO, ALL MODELS
131815
RELAY, MOTOR, 230V
131916
RELAY, MOTOR PCB, 115V
FUSE, 25 AMP, SLO - BLO
131930
RELAY, MOTOR PCB, 230V
137056
GAS VALVE UNIVERSAL COILS
OPTIC SWITCH
FOR DROP COIN ACCEPTORS
WITH OPTIC SWITCH
140110
140111
140112
140115
140116
140117
140118
SECONDARY COIL, FOR PHASE 1 & 2, 140004 GAS VALVES
HOLDING COIL, FOR PHASE 1 & 2, 140004 GAS VALVES
BOOSTER COIL, FOR PHASE 1 & 2, 140004 GAS VALVES
3/8 HI LO BOOSTER COIL, FOR PHASE 3, 140009 & 800036 GAS VALVES
3/8 HI LO HOLDING COIL, FOR PHASE 3, 140009 & 800036 GAS VALVES
3/8 HI LO MAIN VALVE COIL, FOR PHASE 3, 140009 & 800036 GAS VALVES
3/8 HI LO SECOND STAGE COIL, FOR PHASE 3, 140009 & 800036 GAS VALVES
140112
140115
140110
140117
140118
102350
DOOR GASKET, 70” LENGTH
FOR ALL MODELS WITH PLASTIC
DOOR
1 COIL REPLACES
2 ABOVE NUMBERS
1 COIL REPLACES
3 ABOVE NUMBERS
140111
140116
1 COIL REPLACES
2 ABOVE NUMBERS
123000
INDICATOR LIGHT, 110V.
31
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR AMERICAN DRYER
800131
880251
MAGNET HOLDER
INCLUDES MAGNETS &
HOLDER
1/4” TEMPERATURE
SENSOR PROBE
160036
COIN BOX
LOCK & KEY
MLP12 3/4
12 7/8”
COIN BOX
LOCK & KEY
FOR AD 320-330-430 MODELS
FOR MDG-32 MAYTAG MODELS
FOR ALL MODELS
COMPUTER BOARDS
137074
PH-1 & 2 BOARD
137075
PHASE 3, 115V & 230V,
COIN OP MODELS
REPLACES 137110 & 137115
137110
PH-4 1 BOARD
137115
137131
PH-4 BOARD
W/BATTERY CON.
PH-4 BOARD W/
BATTERY CON.
137130
880815
PH-4 BOARD
PH-1 & 2 BOARD
ALL
OTHER
PRINTED
BOARDS
IN STOCK
137077
140150
2 RELAY, 115V
FOR GLO BAR MODELS ONLY
100604
102305
IMPELLER, 12 1/2 “ X 1/2
1/2” BORE
FOR MODELS AD15, 30,
50, 230 & 285
GLASS GASKET
FOR MODELS AD30,
50 & 285 UP TO 1988
ESO CONTROL, DIODE
LOGIC BOARD, FOR ALL
GLO BAR MODELS
LINT SCREENS
800501
FOR 50 & 60 LB.
MODELS, 22 1/2” X 26”
800503
FOR 24, 27, 28 & 30 LB.
MODELS, 22 1/2” X 22
1/2”
63” LENGTH
32
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR AMERICAN DRYER
130318
SWITCHES
SWITCH WITH ARM
137005
137003
122200
SWITCH WITH ARM
FOR MODEL AD330 DOOR
SAIL SWITCH,
AIR FLOW, FOR
ALL MODELS
131595
137002
SWITCH, LINT
DRAWER
122001
DOOR SWITCH, FOR MODEL
AD285 30 LB.
137006
122100
SWITCH, DOOR, 6 TERMINAL,
FOR AD230 STACK DRYER
38C058
SWITCH WITH NUT MOUNT
ROTARY COIN SWITCH,
FOR DROP COIN METER
TRANSFER
YOUR OWN
LEVER.
VARIES WITH
140021
GAS VALVE COIL 115V.
SENSOR & IGNITOR
128910
FLAT GLO BAR
130500
880815
GLO BAR SENSOR
IGNITOR CONTROL BOX
NEW
ITEM
FOR ALL GLO BAR MODELS
REPLACES 880815
33
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
BELTS
V
FOR ADC
100100
100101
100103
100105
100106
100107
100108
100109
100110
100111
100112
100113
100114
100115
100117
100130
100139
100144
100630
100173
FOR CISSELL
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
MV
MV
V
V
MV
FOR AMETEK
66-2787
66-2788
66-2790
MV
4L900 V
AX33 COG
AX51 COG
TU1954
TU2317
TU3394
TU3395
TU4794
TU5447
TU5638
TU8930
5L630
5L610
5L640
5L650
V
V
V
V
V
V
V
V
V
V
V
MV
FOR DEXTER – PHILCO –
IPSO – LAUNDERCENTER
9040-073-003
9040-073-004
9040-076-3
9040-076-005
607-000-072
AX71
A67
SPZ1862
XPZ2000
SPZ1950
XPZ1950
FOR BOCK EXTRACTOR
2157
5459
5461
2400-157-2
4L380
4L500
4L580
4L590
4L660
4L550
DA402
DA403
DA404
DA429
V
V
V
COG
V
V
V
V
COG
FOR IDC
4L500
5L650
4L760
5L690
V
V
V
V
COG
FOR G.E. HOTPOINT
WE12M22
MV
WE12X24 3L490 V
WE12X36 878J3 MV
WE12X46 680H3 MV
WE12X49 996J4 MV
WE12X51 770H4 MV
WE12X79
MV
WE12X82 878H4 MV
WE12X90
MV
WE12X5009
V
WE12X5017 3L430 V
WH1X2026
V
WH1X2788
V
WH1X5089 8X331 COG
WH7X86
V
WH7X113
V
FOR HUEBSCH
430054
430104
HT128
M400222
M400315
M400607
M400608
M401182
M406083
M406386
M411424
M411425
M411814
M412981
TT128
70053103
70053104
70053105
70276203
34
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
COG
MV
4L640 V
V
MV
4L660
V
4L780
V
4L670
V
MV
V
MV
MV
MV
V
4L670
V
MV
MV
MV
MV
BELTS
FOR MILNOR
54R003
AX33 COG
54R006
A36 V
54R006A
AX36 COG
54R006B
AX37 COG
54R007
A38 V
54R008
AX35 COG
54R007B
AX38 COG
54R009G
AX34 COG
54R010
AX71 COG
54R012
AX78 COG
54R110
5L720 V
54T068
BX35 COG
FOR MAYTAG
2-11124
SPEC. V
2-11125
SPEC. V
22003483
SPEC. V
2608400
SPEC. V
3-11012
SPEC. V
3-11013
SPEC. V
3-12959
1000H5 MV
FOR SPEEDQUEEN
20185
COG
20186
COG
20895
COG
23758
COG
23759
COG
27155
COG
27246 SPEC.
V
28043
V
28808 SPEC.
V
37820 SPEC.
V
38174
V
51994 6X460
COG
52556 980J4
MV
59174 SPEC.
MV
81064
V
81459
COG
40051502
MV
40053601
V
40053606
V
40111201
MV
FOR WASCOMAT
90056
4L800 V
652167
5L960 V
770104
3V450 V
770153
3V375 V
770156
770159
3V375 V
900556
4L760 V
900637
3V900 V
900662
3V710 V
900750
3V750 V
900762
3V800 V
903351
3V850 V
920505
3V400 V
FOR UNIMAC
F280304
F280309
F280317
F280319
F280321
F280327
F280337
F280341
F280342
F280343
F280351
F280366
F280369
F280370
FOR WHIRLPOOL KENMORE
95405
96388
234694
237555
237683
286284
298422
337019
337388
341241
345675
349533
356402
356403
660996
661570
693306
694088
694416
694868
695055
697388
3276623
3387610
3389728
3394651
3394652
3394653
3428097
3934700
3394652
3399844
GLASS CORD
USE 352967
6X580
940J4
380J4
USE 691371
940J3
917J3
920H4
920H5
575J4
35
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
COG
SPEC.
COG.
MV
MV
MV
ROUND
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
MV
V
V
MV
MV
BELTS
FHP 3L SERIES
3L160
3L390
3L170
3L400
3L180
3L410
3L190
3L420
3L200
3L430
3L210
3L440
3L220
3L450
3L230
3L460
3L240
3L470
3L250
3L480
3L260
3L490
3L270
3L500
3L280
3L510
3L290
3L520
3L300
3L530
3L310
3L540
3L320
3L550
3L330
3L560
3L340
3L570
3L350
3L580
3L360
3L590
3L370
3L600
3L380
3L610
3L620
3L630
3L690
3L730
3L630
3L690
3L730
FHP 5L SERIES
5L660
5L480
5L670
5L540
5L680
5L550
5L690
5L560
5L700
5L590
5L710
5L600
5L720
5L610
5L760
5L620
5L770
5L630
5L950
5L640
5L960
5L650
3V SERIES
3V375
3V400
3V750
3V425
3V765
3V450
3V800
3V500
3V850
3V710
3V900
3V730
3V950
3V1000
COG 6X SERIES
6X280
6X465
6X380
6X560
6X414
6X565
6X452
6X570
6X460
6X580
6X740
4L170
4L180
4L190
4L200
4L210
4L220
4L230
4L240
4L250
4L260
4L270
4L280
4L290
4L300
4L310
4L320
4L330
4L340
4L350
4L360
4L370
4L380
4L390
4L400
4L410
4L420
4L430
4L440
4L450
FHP 4L SERIES
4L460
4L470
4L480
4L490
4L500
4L510
4L520
4L530
4L540
4L550
4L560
4L570
4L580
4L590
4L600
4L610
4L620
4L630
4L640
4L650
4L660
4L670
4L680
4L690
4L700
4L710
4L720
4L730
4L740
4L750
4L760
4L770
4L780
4L790
4L800
4L810
4L900
4L960
COG A, AX & BX
A36
A38
AX33
AX38
AX34
AX51
AX35
AX71
AX36
AX78
AX37
BX35
BX100
COG 8X SERIES
8X280
8X490
8X331
8X535
8X366
8X575
8X424
8X585
8X460
8X740
36
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
PZ SERIES
SPZ
SPZ
XPZ
XPZ
REPAIR BOOKS
EBWD
EBWW
WHIRLPOOL DRYER
REPAIR
WHIRLPOOL
WASHER REPAIR
WHIRLPOOL – BRAND MANUALS INCLUDE
KENMORE, KITCHENAID, ESTATE AND ROPER
BRAND MACHINES
FOR GAS & ELECTRIC
MODELS
NEW
ITEM
FOR BELT DRIVE &
DIRECT DRIVE MODELS
EBGD
EBGW
G.E./HOTPOINT
DRYER REPAIR
G.E./HOTPOINT
WASHER REPAIR
G.E. – BRAND MANUALS INCLUDE HOTPOINT,
LATE –MODEL RCA, AND
JC PENNY (PENNCREST) BRAND MACHINES
FOR GAS &
ELECTRIC
MODELS
NEW
ITEM
EBMD
EBMW
MAYTAG
DRYER REPAIR
FOR GAS &
ELECTRIC,
OLD STYLE & LATE
MAYTAG
WASHER
REPAIR
NEW
ITEM
FOR OLD &
NEW
MODELS
CLOTHES DRYER REPAIR
EBHD
COVERS THE MOST COMMON PROBLEMS WITH THE MOST COMMON MACHINES.
DIAGNOSIS PROCEDURES FOR GAS BURNER AND ELECTRIC HEATER PROBLEMS ARE COVERED IN DETAIL,
AS WELL AS ELECTRICAL, BROKEN BELTS, RESTRICTED AIRFLOW AND OTHER COMMON BREAKDOWNS.
LIST OF BRANDS COVERED
WHIRLPOOL/KENMORE SPEEDQUEEN
G.E.
WESTINGHOUSE
MAYTAG
KELVINATOR
HOTPOINT
GIBSON
JC PENNY
FRIGIDAIRE
AMANA
MONTGOMERY WARD
NORGE
SIGNATURE AND MANY OTHERS
84 PAGES
FOR GAS & ELECTRIC
MODELS
WASHING MACHINE REPAIR
EBWM
COVERS THE MOST COMMON PROBLEMS ( SUCH AS LEAKS AND OTHER WATER
PROBLEMS, ELECTRICAL AND TIMER PROBLEMS, BELT AND DRIVE TRAIN PROBLEMS, ETC.) WITH THE
MOST COMMON MACHINES .
LIST OF BRANDS COVERED
WHIRLPOOL/KENMORE AMANA
MONTGOMERY WARD
( BOTH BELT DRIVE
NORGE
SIGNATURE
AND DIRECT DRIVE)
SPEEDQUEEN
AND MANY OTHERS
G.E.
KELVINATOR
MAYTAG
FRIGIDAIRE
HOTPOINT
WESTINGHOUSE
JC PENNY
GIBSON
INCLUDES WHPL & GE
DIRECT DRIVE
37
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
MISCELLANEOUS ITEMS
525A
INDICATOR LIGHTS
COIN CHUTE SPRAY
SILICONE LUBRICANT
PL10
PL11
PL12
115V.
220V.
24V.
10 OZ. CAN
DRY SILICONE
LUBRICANT.
12 CANS PER CASE
FOR MANY
APPLICATIONS
REPLACES 540
C86
00 CARDS
OUT OF ORDER CARDS
O.S. LAUNDRY CART CASTER
FOR R&B
3”
C87
N.S. LAUNDRY CART CASTER
FOR R & B
NEW
ITEM
4”
FOR COIN WASHERS AND DRYERS
SOLD IN 500 PACKS ONLY
8-188
KEY WRENCH
WRENCH & KEY SLIP EASILY INTO POCKET, MINIMIZES DANGER OF KEY LOSS OR MISPLACEMENT. IT’S EFFORTLESS
COMFORTABLE MOLDED GRIP LETS YOUR WHOLE HAND DO THE WORK, ELIMINATES SORE FINGERS.
38
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR CISSELL
BEARINGS
DOOR SWITCH
TU1979
TU10003
REPLACES
TU1979H
PILLOW BLOCK
1 3/8” BORE
BELTS
PART #
TU8930
TU1954
TU2317
TU3394
TU3395
TU4794
TU5447
TU5638
TU10002
4 HOLE
FLANGE
1 3/8” BORE
TU9028
SWITCH
TU10362
TU8596
LINT SCREEN 26” X 24”
IGNITOR, NORTON FLAT
STYLE
MULTI V
V BELT
V BELT
V BELT
V BELT
V BELT
V BELT
V BELT
THERMOCOUPLES
26”
TU1157
18” LENGTH
TU5343
24”
36” LENGTH
TU8598
GLO BAR SENSOR
39
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR DEXTER – IPSO – LAUNDERCENTER
WAT E R
VALV E S
209-00168-01
9379-84
9379-183-001
115V.
DOUBLE VALVE 115V.
209-00026-00
9379-183-002
115V.
DOUBLE VALVE 230V.
9379-175-001
209-00110-00
115V.
3 COIL VALVE, 115V
FOR LAUNDERCENTER
O.S. MODELS
OEM
SPEC.
FOR O.S.
DRAIN VALVES
9379-187-001
230V, 3”
9379-173-009
230V, 2”
WITH
OVERFLOW PORT
NORMALLY OPEN
NO OVERFLOW PORT
2”
3”
2”
3”
9539 – 457 – 001
209 – 00007 – 20
9857 – 116 – 01
PRESSURE SWITCH
PRESSURE SWITCH
FENWALL ELECTRIC IGNITOR
FOR
LATE
DRYERS
40
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR DEXTER – IPSO – LAUNDERCENTER
5198-184
CIRCUIT BREAKER 15 AMP.
FOR 16 LB
COMMERCIAL
WASHERS
REPLACES 5198-211
BELTS FOR IPSO
PART #
BRANDED BELTS
WASHER STYLE DESCRIPTION
XPZ2000 50lb.
SPZ1862 35lb.
AX71
35lb.
A67
18lb.
N.S.
O.S.
WITH SINGLE BELT
WITH SINGLE BELT
V BELTS
9040-073-003
REPLACES 9040-077002
& 9040-077-003
9040-073-004
607-000-702
SPZ1862
SPZ1900
SPZ1950
XPZ1950
XPZ2000
226/00008/00
226/00033/00
V BELT
COG BELTS
9040-32
9040-076-3
COG
209/00026/001
9576-209-081
ADJUSTABLE THERMOSTAT
INDICATOR LIGHTS
VALVE, FOR
FOR ALL COMMERCIAL MODELS
LAUNDERCENTER WASHER
3310-9
RED LENS, 115V.
3310-10
AMBER LENS, 115V.
3310-11
WHITE LENS, 115V.
9576-207-001
ADJUSTABLE THERMOSTAT
115V
41
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR DEXTER – IPSO – LAUNDERCENTER
9857-134-001
GAS VALVE
9732-126001
209-00041-03
SWITCH FOR COIN DROP
CONTACTOR, TELEM.
38C058
ROTARY COIN SWITCH,
FOR DROP COIN METER
TRANSFER
YOUR OWN
LEVER.
VARIES WITH
223-00007-00
8502-629-011
SOAP BOX HOSE
TOUCH PAD
PILOT LIGHTS
225-00015-0A AMBER
225-00015-0R RED
225-00015-0C CLEAR
N A M E P LAT E S
9412-074-003 T-300
9412-076-004 T-600
9412-076-005 T-400
42
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR DEXTER – IPSO – LAUNDERCENTER
D RAI N VALV E S
209-00256-00
209-00075-00
2”, 220V., 90º
3”, 220V.
209-00399-00
2”, 220V.
209-00052-00
2”, 110V.
3”. 220V., 90º
DOOR
9244-080-003
209-00051-00
HANDLES
217-00013-00
217-00051-00
LONG STYLE
T – STYLE
9206-164-009
217-00015-00
DRYER DOOR GASKET
DOOR GLASS GASKET
43
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR DEXTER – IPSO – LAUNDERCENTER
209-00107-00
MAIN TIMER, 200V.
BEARINGS FOR
WASHER TUB BACK
209-00013-00
209-00040-00
BEARING KITS
INCLUDES AXIAL RING, COUNTER RING & BEARINGS
PART # MACHINE SIZE
FOR
6306
6307
18 lb.
18 lb.
220V.
110V.
AND
35 lb.
6308
6309
35 lb.
6310
6311
50 lb.
209-00113-00
209-00175-00
COIN STEPPER
SELECTOR SWITCH
209-00275-04 220V.
DOOR LOCK BOARD
209-00217-00 220V.
STEPPER W/DISPLAY
44
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
DRYER THERMOSTATS / LIMIT SWITCHES & FUSES
MADE IN U.S.A.
PART #
TEMP
L14030
L200
STYLE “B”
STYLE “F”
FLUSH MOUNT
STYLE “G”
PART #
TEMP
L23070
L23193
L23251
L23252
L23259
L23260
L28041
L29015
L29514
L31001
L83877
L85111
L530771
L140
L340
L130
L120
L220
L240
L255
L285
L300
L180
L155
L260
L248-80
STYLE “J2” MINI
PART #
TEMP
L22094
L22095
L220
L200
PART #
TEMP
L31007
L1979
5303209192
53-1182
LA1053
WE4X800
WE4M137
490P3
L200
L170
NEW
ITEM
FUSE
FUSE KIT
FUSE
FUSE KIT
FOR WHIRLPOOL
NEW
ITEM
279769
279054
FUSE KIT
3 TERM.
TEMP LD290
FUSES
279650
3390719
NEW
ITEM
3392519
279048
FUSE
THERMOSTAT
NEW
ITEM
REPLACES
3977394
3398671
NEW
ITEM
3387134
4 TERM. TEMP LD155
FOR MAYCOR
306604
FUSE
FOR G.E.
53-1182 FUSE
NEW
ITEM
FOR SPEEDQUEEN
490P3
WE4X800
FUSE
FUSE
LA1053 FUSE KIT
WE4M137
45
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEM
FOR GENERAL ELECTRIC
WH12X1043
WH23X81
WH20X10006
FOR DIRECT DRIVE G.E. WASHER
MODELS USING WH23X81 PUMP
AND WH13X86 WATER VALVE
O.S. ELECTRIC PUMP
DIRECT DRIVE WASHER
MAIN DRIVE MOTOR.
REPLACES WH20X867,
WH20X10001 & WH20X10004
NEW
ITEM
NEW
ITEM
LID SWITCH
NEW
ITEM
PAD ONLY
WH1X2089
DIRECT DRIVE MODELS NO
CONVERSION REQUIRED
WH5X256
CLUTCH
NEW
ITEM
WH2X1137
WH1X2089
WH1X2727
LEVELING WITH PAD LEG
LID SWITCH ACTUATOR
WASHER STRAP
FOR
LATE
MODELS
NEW
ITEM
6“
FOR DIRECT DRIVE MODELS
WH1X484
NEW
ITEM
NEW
ITEM
PAD ONLY
46
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
FOR DIRECT DRIVE WASHERS
WH41X367
USE BE7574
UNIVERSAL DRAIN HOSE FOR LATE G.E.
AND WESTINGHOUSE WASHERS ALSO
USED FOR NORGE, WHIRLPOOL,
KENMORE AND OTHERS
WH13X86
WH12X10074
BLACK
RUBBER
OEM
SPEC.
1” ID.
1 1/4” ID.
1 1/8” ID.
1” ID.
NEW
ITEM
FOR ELECTRIC
PUMP MODELS
72” TOTAL
WH43X10009
COUPLING AGITATOR
OEM
SPEC.
NEW
ITEM
REPLACES WH43X137
AGITATORS
PRESSURE SWITCHES
WH12X10065
PRESSURE SWITCH,
FOR LATE MODELS
NEW
ITEMS
OEM
SPEC.
WH43X87
WH43X102
AGITATOR FOR O.S.
AGITATOR, SWIRL
14 & 16 lb. MODELS REPLACES WH43X105
OEM
SPEC.
WH12X10038
PRESSURE SWITCH,
FOR LATE MODELS
47
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WH43X93
AGITATOR,
STRAIGHT SHAPE
FOR GENERAL ELECTRIC
WASHER PARTS
WASHER MOTORS
WH20X64
WH20X10006
1/3 HP, “T” FRAME, 1725 RPM.
DIRECT REPLACEMENT FOR
MODELS BUILT TO USE
1/3 HP “SQUARE” MOTOR.
NEW
ITEM
NEW
ITEM
DIRECT DRIVE WASHER MAIN
DRIVE MOTOR.
REPLACES WH20X867,
WH20X10001 & WH20X10004
RELAY
WH20X52
1/2 HP, “T” FRAME, 1725 RPM.
DIRECT REPLACEMENT FOR 1/2
OR 1/3 HP “SQUARE” MOTORS
WHERE RELAY DOES NOT NEED
TO BE REPLACED.
WH12X10090
NEW
ITEM
WH20X520
1/2 HP, “T” FRAME, 1725 RPM.
INCLUDES CURRENT RELAY
FOR LATE MODELS.
NEW
ITEM
WATER VALVES
WASHER TIMERS
WH13X86
WH12X888
FOR DIRECT
DRIVE WASHERS
REPLACES #’s
964D129G009
964D129G03
964D129G05
964D129G08
964D129G09
WH12X889
NEW
ITEM
WH12X10074
FOR LATE DIRECT
DRIVE MODELS
WH12X10021
NEW
ITEM
WH13X62
WH13X81
EBGW
G.E./HOTPOINT WASHER REPAIR BOOK
FOR BELT DRIVE & DIRECT DRIVE MODELS
OEM
SPEC.
WH13X55
WH13X57
48
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
WH1X2089
SWITCHES
NEW
ITEM
LID SWITCH
ACTUATOR PAD
WH12X494
WH12X10065
PRESSURE SWITCH,
FOR LATE MODELS
NEW
ITEM
LID SWITCH
PRESSURE SWITCHES
NEW
ITEMS
WH12X10038
OEM
SPEC.
PRESSURE SWITCH,
FOR LATE MODELS
DIRECT DRIVE
O.S. WASHERS
REPLACES WH12X56M
WH12X324
SWITCH W/ARM
WH12X827
Q.D. TIMER SWITCH BLOCK
FOR THE FOLLOWING TIMER NUMBER
WH12X702
WH12X888
FOR COIN OP WASHERS
49
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEM
FOR GENERAL ELECTRIC
WASHER MOTOR START RELAY
WH12X468
FOR 1/2 HP SQUARE MOTORS
WH12X235
FOR 1/3 HP MOTORS ONLY
WH12X629
WH12X400
3 WIRE FOR 1/3 HP
COMMERCIAL
FOR 1/2 HP ROUND MOTORS
WH8X367
WH8X347
TRANSMISSION GASKET
FOR PLASTIC COVER.
TRANSMISSION SEAL
FOR O.S. MACHINES,
WITH PLASTIC HOUSING
NEW
ITEM
WH12X10090
NEW
ITEM
WH8X242
DIRECT DRIVE
FOR METAL COVER
WH49X90
WATER VALVE REPAIR KIT
WH12X235 REPLACES
PUMPS
WH23X42
SEALS & KITS
WH38X29K
PUMP
TRANSMISSION SEAL KIT
WH8X242
NEW
ITEM
GASKET FOR
METAL COVER
GEK2
WH23X53K
PUMP CONVERSION KIT
WH23X81
ELECTRIC PUMP
O.S. DIRECT
DRIVE MODELS
WH2X671
WH8X318
SEAL
NEW
ITEM
SEAL HUB
WH41X132
FILL SPOUT
WH8X291
AGITATOR SHAFT SEAL
WH8X281
LOWER TRANSMISSION SEAL
NEW
ITEM
50
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
WH2X1137
NEW
ITEM
WH41X184
LEVELING LEG
USE BE7572
UNIVERSAL PUMP AND DRAIN HOSE
AN ALL PURPOSE HEAVY WALL, BLACK SMOOTH
EXTRUDED DRAIN HOSE. FOR CONVENTIONAL AND
AUTOMATIC MACHINES. 3/4” X 6’ LONG. WITH EXPANDER
TO FIT 7/8” OR 1” OUTLETS. 6” WITH 90 DEGREES ELBOW
FOR
LATE
MODELS
BLACK
RUBBER
PAD ONLY
72” TOTAL
1” ID.
7/8” ID.
3/4” ID.
5”
FOR MODELS USING
WH23X42 PUMP
WH1X484
5”
60”
WH41X367
USE BE7574
UNIVERSAL DRAIN HOSE FOR LATE G.E. AND
WESTINGHOUSE WASHERS ALSO USED FOR NORGE,
WHIRLPOOL, KENMORE AND OTHERS
BLACK
RUBBER
1” ID.
1 1/4” ID.
1 1/8” ID.
1” ID.
FOR ELECTRIC
PUMP MODELS
72” TOTAL
WH12X624
WH16X374
RED LENS 115V
CABLE ASSEMBLY
OEM
SPEC.
WH1X1944
WH1X2641
AGITATOR SPLINE
NYLON COUPLING
OLD STYLE
METAL & RUBBER
FOR MODELS
WITH METAL
COVER
TRANSMISSION
OEM
SPEC.
NEW STYLE
NYLON &
RUBBER
FOR LATE
MODELS
WITH PLASTIC
COVER
OEM
SPEC.
51
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
WH1X1654
WH1X2118
WH16X513
WX5X1325
LID BUMPER
TIMER HUB
FOR BLACK TIMER
CLIP FOR
DRAIN HOSE
SPANNER TOOL
NEW
ITEM
FOR DIRECT
DRIVE WASHERS
NEW
ITEM
NEW
ITEM
NEW
ITEM
GREY RUBBER. FOR GE
AUTOMATIC WASHERS. 2 USED
PER MACHINE.
BOOTS & CLAMPS
WH8X246 BOOT
WH1X1292
WH8X282
WH8X292
SMALL BOOT CLAMP
WHITE PLASTIC BOOT
BLACK PLASTIC BOOT
WH1X1580
USED WITH
WH8X246
LARGE BOOT CLAMP
NEW
ITEM
WH7X64
SHOE CLUTCH
WH1X2267
WH41X58
WH41X184
WH1X1986
WASHER FILTER
FILL HOSE 5 FT.
DRAIN HOSE
AGITATOR SUPPORT
REPLACES
WH7X101 &
WH7X110
WASHER BELTS
WH1X2788
WH4X12
WH8X305
DRUM BEARING
TUB GASKET
BELT
OEM
SPEC.
WH7X113
BRANDED BELT
WH7X86
BRANDED BELT
WH1X2026
NEW
ITEM
BRANDED V BELT
WH1X5089
BRANDED V BELT
WH8X366
WHITE RUBBER CLOTHES GUARD ON TUB TOP
NEW
ITEM
OEM
SPEC.
REPLACES
WH8X294
52
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
72-33
74-1053-6
TIMER CLUTCH
FOR WASHERS & DRYERS
FOR G.E. & S.Q.
LATE WASHERS
REPLACES 72-33-3, 72-33-4
74-1028
USED WITH
74-1053-6
CASE.
COIN BOX ONLY
8-1210
REPLACES 74-1031-3,
74-1053 & 74-1053-5
50-1223-10
METER SERVICE
DOOR & LOCK
FOR G.E. NS
V8 COIN CHUTES
3 SWITCHES,
FOR G.E. & SPEEDQUEEN
VERTICAL 8 COIN CHUTES
$ CAPACITY = $.25 THROUGH $ 2.00
V8-25
V8-50
V8-75
V8-100
V8-125
V8-150
V8-175
V8-200
74 – 150 GENERAL ELECTRIC GR100
8-1001-28 GENERAL ELECTRIC GR100
8-1001-28
74-150
LID LOCK FOR G.E.
SERVICE DOOR LOCK
$.25
$.50
$.75
$1.00
$1.25
$1.50
$1.75
$2.00
74-94-2
CHUTE EXTENSION
FOR G.E. WASHER
75-1014
CHUTE EXTENSION
FOR G.E. DRYERS
MOTORS
WASHERS
DRYERS
WE17X32
WH20X52
1/2 HP, “T” FRAME, 1725 RPM.
DIRECT REPLACEMENT FOR 1/2
OR 1/3 HP “SQUARE” MOTORS
WHERE RELAY DOES NOT NEED
TO BE REPLACED.
WH20X10006
DIRECT DRIVE WASHER MAIN
DRIVE MOTOR.
REPLACES WH20X867,
WH20X10001 & WH20X10004
WE17M22
53
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
BELTS
WE12M22 MULTI V BELT
WE12X24 BELT
WE12X36 MULTI V BELT
WE12X46 MULTI V BELT
WE12X49 MULTI V BELT
NEW
ITEM
MULTI V BELT
REPLACES WE12X43
WE12X51
WE12X79
WE12X82
MULTI V BELT
MULTI V BELT
MULTI V BELT
REPLACES WE12X42
WE12X90 MULTI V BELT
WE12X5009 BELT BRANDED
WE12X5017 BELT
V BELT
LINT SCREENS
WE18X26
WE18X26M
PLASTIC
METAL
FOR COIN-OP
WE18M18
REPLACES WE18M13 &
WE18M17
NEW
ITEMS
WE18X54
DROP IN
WE18M19
NEW
ITEM
STACK DRYER
DUCT REPAIR KIT
WE14X14
WE14X18
NEW
ITEM
54
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GENERAL ELECTRIC
DOOR CATCH
WE1X528
SPRING
WE1X1032
WE1X1153
WE1X903
WE12X81
WE1X759
IDLER ROLLER
NEW STYLE IDLER
PULLEY WITH
INTEGRAL BEARING.
2 PLASTIC BEARINGS,
USED WITH
OLD STYLE PULLEY
NEW
ITEM
REPLACES
WE12X47 &
WE12X83
INDICATOR LIGHT
WE1X715
WE17M22
PILOT UNLATCH 11”
MOTOR
WE17X32
O.S. DRIVE MOTOR
WE1X842
ROUND, 110V.
WE1X907
AMBER LENS, 115V
WE1X950
AMBER LENS, 115V
NEW
ITEM
G.E. #
WE4M126
WE4M137
WE4M156
WE4M160
WE4X162
WE25X161
WE25X167
WE4X154
WE4X186
WE4X261
WE4X275
WE4X324
WE4X325
WE4X339
WE4X340
WE4X394
WE4X395
WE4X543
WE4X544
WE4X545
WE4X546
WE4X547
L.B. #
L23251
L22094
L85111
L23251
L83877
L83877
L31001
L85111
L1979
L23043
L23193
L23193
L23070
L85111
L23251
L23193
L23070
L23251
TEMP.
L260
THERMOSTATS
L180
L260
L170
L160
L340
L340
L140
L260
L130
L340
L140
L130
G.E. #
WE4X549
WE4X550
WE4X551
WE4X552
WE4X554
WE4X583
WE4X584
WE4X586
WE4X587
WE4X589
WE4X590
WE4X591
WE4X592
WE4X593
WE4X594
WE4X596
WE4X600
WE4X601
WE4X730
WE4X730
WE4X800
55
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
L.B. #
L23070
L23251
L23070
L29514
L23070
L83877
L85111
L23193
L23070
L23070
L23251
L23070
L29514
L23193
TEMP.
L140
L130
L140
L300
L140
L155
L260
L340
L140
L140
L130
L140
L300
L340
L23251
L130
FUSE
FOR GENERAL ELECTRIC
GAS VALVE COILS
WE4X693
WE4X692
WE4X338
N.S.
COILS
C650
SECONDARY COIL
COIL KIT
WE4X560
O.S. COIL KIT
HEATER COIL KITS
WE11X103C
1/2” OD
REPLACES #’ s
WE11X203
WE11X103
WE11X95C
WE11X80C
WE11X89
WE11X89C
WE11X91
WE11X91C
WE11X92
WE11X92C
WE11X95
WE11X80
WE11X60
WE11X61
HIGH VOLTAGE
(250V)
NEW
ITEM
3/8” OD
WE11X260
HEATER KIT,
2 COILS & BOLTS 4
COPPER
230V, 5000 WATTS
NEW
ITEM
5/16” OD
WE11M23
WE9X28
HEATER W/HOUSING
DOOR GASKET
WE1M305
WHITE
NEW
ITEM
WE11X90C
HANDLES
WE1X1188
5/16” OD
STANDARD
VOLTAGE
(200V – 240V)
WE25M27C
REPLACES #’s
WE11M18
WE11M18C
WE11M21C
WE11X10007
WE11M23C
WHITE
6 FEET LONG
NEW
ITEM
7 1/4”
OEM
SPEC.
4 1/4”
REPLACES #
WE25M27 & WE11M21
56
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEM
FOR LATE MODELS
FOR GENERAL ELECTRIC
BEARINGS & BEARING KITS
WE3X72
WE3X37
BEARING, WITH LIP
REPLACES # WE3X74 & WE3X75
BEARING, NO LIP
NEW
ITEM
WE3M19
DRUM BEARING
REPLACES #
WE3M16
WE25X205
BEARING KIT
REPLACES # WE25X62 & WE25M12
NEW
ITEM
DRUM SLIDES & SLIDE REPAIR KITS
WE25X60
WE13X93
DRUM SLIDE 18 lb.
SLIDE 2 PER KIT
WE3X87
DRUM SLIDE
REPLACES WE3X76,
WE3X83, & WE3X84
WE1M316
DRUM SLIDE
WE13X68K
SLIDE REPAIR KIT
SWITCHES
WE4X640
LIGHT SWITCH
WE4M126
WE4X197
WE4X344
DOOR SWITCH, SQUARE
MOTOR SWITCH
WE4M157
NEW
ITEM
DOOR SWITCH, 3 TERM.
WE4X199
DOOR SWITCH, 4 TERM.
DOOR SWITCH, SQUARE
DRYER IGNITORS & ACCESSORIES
WE4X739
WE4X750
NEW STYLE
WE4X444
OLD STYLE
FOR WE1X941
WE4X448
DRYER SENSOR
57
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WE1X941
IGNITOR BRACKET
FOR WE4X444
FOR GREENWALD
V8 COIN CHUTES
VERTICAL 8 COIN CHUTES
$ CAPACITY = $.25 THROUGH $ 2.00
V8-25
V8-50
V8-75
V8-100
V8-125
V8-150
V8-175
V8-200
$.25
$.50
$.75
$1.00
$1.25
$1.50
$1.75
$2.00
V5 COIN CHUTES
VERTICAL 5 COIN CHUTES
$ CAPACITY = $.25 THROUGH $ 1.25
V5-25
V5-50
V5-75
V5-100
V5-125
$.25
$.50
$.75
$1.00
$1.25
V5-25 REPLACES UNIV4-25
V5-50 REPLACES UNIV4-50
V5-100 REPLACES UNIV4-100 & 27-3002
V4 COIN CHUTES
VERTICAL 4 COIN CHUTES
$ CAPACITY = $.25 THROUGH $ 1.00
V4-25
V4-50
V4-75
V4-100
$.25
$.50
$.75
$1.00
58
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
VERTICAL 5 COIN CHUTE BREAKDOWN
V5
PART #’s ON NEXT PAGE
59
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
VERTICAL 5 COIN CHUTE BREAKDOWN
INSTRUCTIONS TO CHANGE VEND PRICES
TO CHANGE $.05 or $.10 PRICING
U.S. MODELS ONLY.
U.S. & CANADIAN MODELS;
$.25 & &1.00 VEND PRICES.
1. REMOVE SLIDE RETURN SPRING (#15).
2. PLACE COIN(S) IN SLOT(S) & PUSH FORWARD ALL THE WAY.
3. REMOVE BUFFER (#26).
4. TURN COIN CHUTE UPSIDE DOWN AND INSTALL OR REMOVE
REQUIRED NUMBER OF BLOCKOUT KEYS, (#24) OR INSERTS, (#41). ADD
TO LOWER, REMOVE TO INCREASE VEND PRICE.
5. REASSEMBLE BUFFER.
6. PULL SLIDE BACK TO ORIGINAL POSITION AND REASSEMBLE SLIDE
RETURN SPRING.
1. FOLLOW STEPS 1, 2, 3 ABOVE
2. TURN CHUTE UPSIDE DOWN AND INSTALL OR REMOVE REQUIRED
NUMBER OF BLOCK – OUR KEYS (#24) OR INSERTS (#31 or #32).
3. REASSEMBLE BUFFER AND PULL SLIDE BACK.
4. REMOVE TOP HOUSING (#3) AND TURN HOUSING UPSIDES DOWN.
5. INSTALL CORRECT COIN SIZING BLOCK (#33, #34, #35, or #36).
6. REASSEMBLE TOP HOUSING AND RETURN SPRING.
7. INSTALL CORRECT DECALS (#9 & 13).
CANADIAN $.25 OR $1.00 VEND PRICCES.
COIN CHUTE IDENT. #27-3029 ONLY
7. REMOVE TOP HOUSING (#3).
8. REMOVE OR INSTALL SIZING PLATE(S) (#39 or #40).
9. REASSEMBLE TOP HOUSING.
10. INSTALL CORRECT DECALS (#9 & #13).
60
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
VERTICAL 8 COIN CHUTE BREAKDOWN
V8
61
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
VERTICAL 8 COIN CHUTE BREAKDOWN
V8
PART #’s ON NEXT PAGE
62
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
VERTICAL 8 COIN CHUTE BREAKDOWN
CHANGING THE PRICE OF
VERTICAL 8 COIN CHUTE
ID # 20-3000
1. REMOVE SLIDE RETURN SPRING (#15).
2. REMOVE SLIDE STOP (#22)
3. REMOVE SLIDE (#12) FROM CHUTE.
4. TURN SLIDE UPSIDE DOWN AND REMOVE SCREW (#38), DO NOT
REMOVE COIN RECEIVER BLOCK.
5. TURN SLIDE AND BLOCK RIGHT SIDE UP AND LAY ON A FLAT
SURFACE.
6. LIFT SLIDE CLEAR OF BLOCK AND SET ASIDE.
7. TO CHANGE PRICES, ADD OR REMOVE BLOCKOUT KEYS (#24) OR
INSERTS (#20).
8. REPLACE COIN RECEIVER BLOCK INTO SLIDE AND REINSTALL INTO
COIN CHUTE.
9. FOR $.10 PRICING
A. REMOVE TOP HOUSING (#3).
B. INSTALL CORRECT COIN SIZING BLOCK (#31) OR (#36).
10. INSTALL CORRECT DECALS, (#10 & #13).
CHANGING THE PRICE OF
THE VERTICAL 8 COIN CHUTE
ID # 20-3020
A. TO CHANGE $.25 PRICING
1. REMOVE SLIDE RETURN SPRING (#15).
2. PLACE COIN(S) IN COIN SLOT(S) AND PUSH SLIDE FORWARD ALL THE
WAYS.
3. REMOVE BUFFER (#28).
4. TURN COIN CHUTE UPSIDE DOWN AND INSTALL OR REMOVE REQUIRED
NUMBER OF BLOCK-OUT KEYS (#24). REMOVE KEYS TO INCREASE VEND, ADD
KEYS TO LOWER VEND.
5. REASSEMBLE BUFFER.
6. PULL SLIDE BACK TO ORIGINAL POSITION AND REASSEMBLE SLIDE
RETURN SPRING.
7. INSTALL APPROPRIATE PRICE DECALS (#10 & #13).
B. TO CHANGE $.10 PRICING
1. FOLLOW STEPS 1, 2, 3, 4 IN A. ABOVE
2. TURN COIN CHUTE UPSIDE DOWN:
A. INSTALL OR REMOVE REQUIRED NUMBER OF BLOCK-OUT KEYS, (#24).
B. INSTALL OR REMOVE $.10 INSERT (#20), INTO LEFT HAND SLOT OF SLIDE
(RIGHT HAND SLOT WITH SLIDE TURNED UPSIDE DOWN).
3. REASSEMBLE BUFFER AND PULL SLIDE BACK.
4. REMOVE TOP HOUSING (#3).
5. REMOVE TWO SCREWS (#2) AND COIN SIZING BLOCK (#5). INSTALL $.10
COIN SIZING BLOCK (#31).
6. REASSEMBLE TOP HOUSING AND RETURN SPRING.
63
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
COIN CHUTE DECALS
ALL CHUTE DECALS ARE PACKAGED 12 PER PACK
MYLAR SELF-ADHESIVE DECALS SOLD IN SHEETS OF 12. BLACK NUMBERS ON A MATTE SILVER
BACKGROUND WITH A RED BORDER (SLIDE & U4 BODY) OR A RED BACKGROUND (V8 & V5
FOR SLIDE BAR
00-9104-14
00-9104-15
00-9104-24
00-9104-25
00-9104-26
00-9104-29
00-9104-3
00-9104-36
00-9104-37
00-9104-38
00-9104-39
00-9104-4
00-9104-6
00-9104-7
00-9104-8
FOR U4 BODY
.85 SLIDE
.25 SLIDE
1.25 SLIDE
1.50 SLIDE
2.00 SLIDE
1.75 SLIDE
.60 SLIDE
2.50 SLIDE
3.00 SLIDE
3.50 SLIDE
4.00 SLIDE
.75 SLIDE
.35 SLIDE
.50 SLIDE
1.00 SLIDE
00-9158-12
00-9158-15
00-9158-2
00-9158-4
00-9158-7
00-9158-9
00-9158-14
.75 U4 BODY
1.00 U4 BODY
.25 U4 BODY
.35 U4 BODY
.50 U4 BODY
.60 U4 BODY
.85 U4 BODY
FOR V5 BODY
FOR V8 BODY
00-9905-1
00-9905-2
00-9905-3
00-9905-4
00-9905-5
00-9905-6
00-9905-7
00-9905-8
00-9232
50¢
.50 V8 BODY
.75 V8 BODY
1.00 V8 BODY
.60 V8 BODY
1.25 V8 BODY
1.50 V8 BODY
1.75 V8 BODY
2.00 V8 BODY
25¢
50¢
75¢
$1.00
$1.25
$1.50
$1.75
$2.00
00-9910-1
00-9910-11
00-9910-13
00-9910-16
00-9910-18
00-9910-21
00-9910-24
GENERAL PURPOSE
00-7225
.25 V5 BODY
.50 V5 BODY
.60 V5 BODY
.75 V5 BODY
.85 V5 BODY
1.00 V5 BODY
1.25 V5 BODY
76-95
25¢
50¢
75¢
$1.00
$1.25
$1.50
$1.75
$2.00
00-9061
SECURITY SCREW
SECURITY SCREWDRIVER
SECURITY SCREW DRIVER DISCOURAGES VANDALISM, PILFERAGE &
SECURITY SCREW, STANDARD #10-16X11/16” LONG
TAMPERING. THE SECURITY SCREW CAN REPLACE #10 SIZE SHEET METAL
TYPE “ B ” TAPPING THREAD FOR SHEET METAL
SCREWS USUALLY USED FOR CORES, PLATES, PANELS, ETC. ON
ASSEMBLY. CADMIUM FINISH STEEL. USE WITH
COIN-OPERATED EQUIPMENT. SCREW HAS A SPECIALLY GREENWALD DRIVING
00-9061, BAG OF 100
TOOL. CONVENTIONAL TOOLS CAN’T BE USED.
USE WITH 00-7225 SECURITY SCREWS
64
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
TOKETTE EQUIPMENT
11-1111
CHUTE, TOKETTE 1
# 1 LARGE FOR BLACK TOKETTE
11-1115
CHUTE, TOKETTE 2
# 2 SMALL FOR GREEN TOKETTE
WHEN USING THE “ TOKETTE COIN
CHUTE SYSTEM “A” TOKETTE ”
COIN CHUTE MUST BE INSTALLED
ON EACH WASHER & DRYER.
11-5010
TOKETTE 2, GREEN, 1M PER PACK
REPLACES 11-5010-15
11-5020-1
TOKETTE 1, BLACK, 1M PER PACK
REPLACES 11-5020 & 11-5000
RECOMMENDED WHERE BREAK IN’S OR LOCK PICKING IS A PROBLEM
COIN CHUTE SYSTEM DESIGNED FOR USE WITH SPECIALLY SHAPED, INEXPENSIVE
PLASTIC TOKETTES WHICH ARE BROKEN UP & RENDERED USELESS BY THE COIN
CHUTE. RECOMMENDED WHERE TOKETTES CAN BE SOLD FROM CENTRAL
LOCATIONS SUCH AS COLLEGES, INSTITUTIONS,
HOUSING AUTHORITIES & ROUTE OPERATIONS.
65
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
MONEY BOXES
”
3.515
”
3.515
7.840
”
5.5”
”
3.515
4.0”
2.375”
2.375”
2.375”
8-1210
UG400A MONEY BOX 5.5”
ROUND KEY
8-1240
UG400B MONEY BOX 8”
GREENWALD ROUND KEY
8-1210-10
UG400 MEDICO MONEY BOX
FLAT KEY
8-1210-42
ECONOMY BOXES
3.5”
5.
5”
UG400 SENTINEL MONEY BOX
FLAT KEY
8-1150
ULTRA GUARD MONEY BOX, 4”
CAN BE ORDERED KEYED ALIKE
IN GROUPS TO 100. ROUND KEY
8-1150-10
MEDICO BOX, SHORT
8-1150-6
ABLOY UG BOX, SHORT
3.5”
7.
84
4.17
5”
”
6.1
7
DIAMETER
3.390”
6”
DIAMETER
3.390”
8-1260
MG3000 FLAT FACE MONEY
BOX 5.5” WITH ROUND KEY
8-1400
8-1420
8-1260-42
8-1270
FLAT FACE MONEY BOX L
FLAT, SENTINEL
FLAT FACE
MONEY BOX
UG1200 ROUND BOX 4”
ROUND KEY
UG1200A ROUND BOX 6”
ROUND KEY
”
3.515
”
3.515
7.2
50”
”
3.515
5.8
75”
4.0
”
3.175”
3.175”
3.175”
8-1275
8-1170
8-1175
UG800B MONEY BOX 7”
ROUND KEY
UG800 MONEY BOX 5.9”
ROUND KEY
UG800A MONEY BOX 4”
ROUND KEY
66
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
COMPLETE COIN METER MECHANISMS
59-3200-2
FOR PERMANENT PRESS
ROUND FACE, SINGLE COIN, DOUBLE ENCLOSED
SWITCH. REPLACES ALL PERMANENT PRESS,
DOUBLE SWITCH METERS.
REPLACES 59-3200-35, 59-3200-35-1
SPECIFY TIME, COIN and VOLTAGE.
59-3100-23
FOR STANDARD DRYERS
ROUND FACE, SINGLE COIN, SINGLE
ENCLOSED SWITCH REPLACES ALL STANDARD
SINGLE, OPEN SWITCH METERS 59 – 1000
5900P METER APPLIES TO BOTH SINGLE
AND DOUBLE SWITCH METER WHEN
ENCLOSED SWITCH IS USED. WILL
REPLACE ALL 5900 METERS WITH OPEN
SWITCH.
REPLACES 59-3100-15
SPECIFY TIME, COIN and VOLTAGE.
$.25 TO $1.00 START AVAILABLE
59-3200-15
FOR PERMANENT PRESS
SQUARE FACE, SINGLE COIN,
DOUBLE SWITCH METER.
SPECIFY TIME, COIN and VOLTAGE.
BOXED INDIVIDUALLY – 24 PER CASE
67
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
COIN METER TIMER MOTORS
PART #
5-61-1
50-61-2
50-61-6
50-61-7
50-61-12
50-61-13
50-61-29
50-61-38
50-61-40
50-61-45
50-61-46
50-61-48
50-61-49
50-61-56
RPM
VOLTAGE
WIRE COLOR
1/60
1/60
1/30
1/30
1/120
1/180
1/60
1/10
1/10
3/5
3/100
1/20
1/20
1/90
115V
230V
115V
230V
115V
115V
24V
115V
24V
115V
115V
115V
24V
115V
BLACK
BROWN
BLACK
BLUE 50cy.
BLACK
BLACK
YELLOW
BLACK
YELLOW
BLACK
BLACK
BLACK
YELLOW
BLACK
COIN METER FRONT PLATE ASSEMBLIES
COIN HANDLING SECTIONS ONLY
1548-25 $.25, ROUND FACE
REPLACES KIT1548
1545-25 $.25, SQUARE FACE
1548-10 $.10, ROUND FACE
1545-10 $.10, SQUARE FACE
REPLACES KIT1545
MULTI COIN START KITS
KIT1074-2
FOR .50¢ START
KIT1074-3
FOR .75¢ START
KIT1074-4
FOR $1.00 START
68
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
TIMER
MOTOR
RPM
1/20
NO. OF
PINS ON
CAMS
1
2
3
4
5
6
7
8
9
10
11
12
1/30
1/60
1/90
1/120
TIMING CAMS
FOR 5900P MET
1/180
STANDARD HUB – TWIST KNOB METER
TIMING IN MINUTES
20
10
6 & 2/3
5
4
3 & 1/3
2 & 7/8
2 & 1/2
2 & 1/4
2
1 & 5/6
1 & 2/3
30
15
10
7 & 1/2
6
5
4 & 1/4
3 & 3/4
3 & 1/3
3
2 & 2/3
2 & 1/2
60
30
20
15
12
10
8 & 5/8
7 & 1/2
6 & 2/3
6
5 & 1/2
5
90
45
30
22 & 1/2
18
15
12 & 7/8
11 & 1/4
10
9
8 & 1/6
7 & 1/2
120
60
40
30
24
20
17 & 1/8
15
13 & 1/3
12
10 & 5/6
10
FOR STANDARD HUB USE 59 – 439 + NO. OF PINS.
EXAMPLE: 59 – 439 – 8 = 8 PIN CAM WITH DRIVE
CLIP.
180
90
60
45
36
30
25 & 3/4
22 & 1/2
20
18
16 & 2/3
15
RATCHETS FOR 5900P METERS
LEVERS FOR
5900P METERS
KIT 1662
REPLACES
59-0313 & 59-181
59-349-1
59-943-2
59-0405
59-0406
59-943-6
59-350
COIN CARRIERS FOR 5900P METERS
59-3019
59-3018
O.S.
O.S.
59-1472-1
N.S.
O.S.
STEEL
PLATED
GOLD
N.S.
DIE CAST
69
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
SPRINGS
00-8148
00-8140
RETURN SPRING
USED ON V8 & V5 COIN CHUTES
RATCHET SPRING, USED ON 76-1003
O.S. WASCOMAT WASHER
START MECHANISM
00-8149
59-169
00-8040
00-8114
TORSION SPRING
RETURN SPRING, USED
ON DRYER 5900 COIN METERS
INDEX LEVER SPRING
00-8125
SLIDE RETURN SPRING,
USED ON U4 COIN
CHUTES
KIT 1526
ANTI-CHEAT FLAT SPRING,
USED ON DRYER 5900 COIN
METERS REPLACES 59-0374-3 & KIT471
59-204
COIL SPRING FOR DERENT ARM,
USED ON DRYER 5900 COIN METERS
59-0192
COIL SPRING
REPLACES 59-103, 56-167 & 59-168
00-8120
SIZING DOG SPRING,
USED ON U4 COIN CHUTES
00-8003
COIL SPRING PAWL,
USED ON DRYER 5900 COIN METER
00-8067
00-8161
RATCHET SPRING, USED ON 76-1030
N.S. WASCOMAT WASHER
START MECHANISM
COIL SPRING FOR INDEX LEVER
USED ON DRYER 5900 COIN METERS
00-8098
COIN DROP SPRING
USED ON DRYER 5900 COIN METERS
30-18
RATCHET SPRING
70
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
COMPLETE COIN METER MECHANISMS
SERIES 8325 – GROUP 1 GENERAL PURPOSE METER
WITH 1 SWITCH
TIME ACCUMULATION METER ( 110 )
GENERAL PURPOSE APPLICATIONS : LAUNDRY,
CAR WASH, GAMES, RECREATIONAL LIGHTING,
TCC. RIGHT HAND MOUNT STANDARD; FINISH : ZINC
PLATE, SILVER GRAY BAKED ENAMEL PAINT.
SPECIFY TIME, COIN and VOLTAGE.
TWO SWITCH MECHANISM AVAILABLE.
WITH LONG COIN BOX
RIGHT HAND
MOUNT ONLY
GRAY CASE
71
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
SERVICE PANEL LOCKS
KEY ONLY
PART #
FOR
SERVICE PANEL KEYS
LOCK & KEY
PART #
APPLICATION
GR100
GENERAL ELECTRIC
74 – 150
FOR SERVICE DOOR
GR100
GENERAL ELECTRIC
8-1001-28
FOR LID WITH STUD
GR200
SPEEDQUEEN
87 – 226
FOR SERVICE DOOR
GR600
GENERAL PURPOSE
60A34
GR675
GENERAL PURPOSE
60A34
GR700
FRIGIDAIRE
7 – 33
7-33 REPLACES 8-1025
GR777
WHIRLPOOL
68 – 1124
FOR SERVICE DOOR
GR777
WHIRLPOOL
8-1181
FOR LID WITH STUD
SPEEDQUEEN
87 – 1226
SERVICE
GR300
GR400
GR415
GR800
GR888
GR900
GR999
GR3800
MX7-ZB7
MMNI
SPEEDQUEEN
68 – 1172
WHIRLPOOL
7-23
WHIRLPOOL
68 – 1174
DEXTER
8 – 63
MAYTAG
7-35
NORGE
8-61
SERVICE
SERVICE
SERVICE
SERVICE
SERVICE
LID & SERVICE DOOR
72
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
MONEY BOX LOCKS & KEYS WITH G.W. TUBULAR LOCKS
8-1000-22
8-94
REPLACES MLP57/8
FOR MAYTAG TOP LOAD COIN BOX.
USED FOR FLAT FACE BOX
CAN BE ORDERED KEYED ALIKE
IN GROUPS UP TO 100.
UG8-94
FOR USE WITH LONG NOSE BOX
8 – 1150, 8 – 1170, 8 – 1175, 8 –1210
CAN BE ORDERED KEYED ALIKE
IN GROUPS UP TO 100.
WITH LONG KEY
REPLACES 8-55-1
8-1001-28
LID LOCK FOR G.E.
M401581
FOR HUEBSCH MONEY BOX
REPLACES MLC75/8, MLC711/16 & MLC75/8
2 1/2”
LOCK WITH & WITHOUT STUDS
MEDICO
ABLOY
SENTINEL
8-188
KEY WRENCH
WRENCH & KEY SLIP EASILY INTO POCKET, MINIMIZES DANGER OF KEY LOSS OR MISPLACEMENT. IT’S EFFORTLESS
COMFORTABLE MOLDED GRIP LETS YOUR WHOLE HAND DO THE WORK, ELIMINATES SORE FINGERS.
73
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
77-1000
77-1007
ABLOY, LOCK & KEY
LOCK COMBINATION IS SCRAMBLED
AS KEY IS REMOVED
MEDICO, LOCK & KEY
PRECISION – CUT KEY COMBINES DOUBLE
ACTION ELEVATION AND ANGULAR ALIGNMENT.
91-1101
SENTINEL LOCK & KEY
77-1025-6
8-1000-39
77-1047-18
LOCK & KEY
MEDICO, LOCK & KEY
FOR HUEBSCH
FOR TWINSTAR
STACK MODELS
FOR MONEY BOX
72-33
TIMER CLUTCH
74-1053-6
74-94-2
WASHERS & DRYERS
FOR G.E.
CHUTE EXTENSION
FOR G.E. WASHER
FOR G.E. & S.Q.
LATE WASHERS
REPLACES 72-33-3, 72-33-4
REPLACES 74-1031-3, 74-1053 & 74-1053-5
HEATER
74-1028
FOR CAR WASH
AND OUTDOOR METERS
METER SERVICE
DOOR & LOCK
FOR G.E. NS
KIT 1386
24 VOLT & 115V
USED WITH 74-1053-6 CASE.
74
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
CHUTE COIN MECHANISMS FOR DRYERS
50-1201-2
115V, 1 SWITCH,
FOR 8300 & 8325
COMPLETE METERS
INCLUDES DOOR
& LOCK
50-1212-1
2 SWITCHES, BASIC
50-1212-31
IDC
50-1222-4
2 SWITCHES, FOR G.E.
*
50-1232-4
2 SWITCHES, INCLUDES
MOUNTING BRACKET
FOR WHLP
* 50-1223-10
3 SWITCHES,
OLD
NUMBER
NEW
NUMBER
50-1100
50-1122-2
50-1212-39
50-1212-46
50-1213-10
50-1213-18
50-1213-23
50-1213-28
50-1213-29
50-1223-7
50-1223-8
87-1213-1
50-1201-2
50-1222-4
50-1212-1
50-1212-1
50-1223-10
50-1223-10
50-1223-10
50-1223-10
50-1223-10
50-1223-10
50-1223-10
50-1223-10
FOR G.E. & SPEEDQUEEN
50-61- + SPEED &
VOLTAGE
51-161- +
NUMBER OF PINS
59-999
TIMER
MOTOR
RPM
1/20
NO. OF
PINS ON
CAMS
1
2
3
4
5
6
7
8
9
10
11
12
1/30
1/60
1/90
1/120
1/180
TIMING IN MINUTES
20
10
6 & 2/3
5
4
3 & 1/3
2 & 7/8
2 & 1/2
2 & 1/4
2
1 & 5/6
1 & 2/3
30
15
10
7 & 1/2
6
5
4 & 1/4
3 & 3/4
3 & 1/3
3
2 & 2/3
2 & 1/2
60
30
20
15
12
10
8 & 5/8
7 & 1/2
6 & 2/3
6
5 & 1/2
5
90
45
30
22 & 1/2
18
15
12 & 7/8
11 & 1/4
10
9
8 & 1/6
7 & 1/2
120
60
40
30
24
20
17 & 1/8
15
13 & 1/3
12
10 & 5/6
10
180
90
OPPOSITE HUB – CHUTE TYPE METER
60
FOR OPPOSITE HUB USE 51 – 161 + NO.
45
OF PINS EXAMPLE : 51 – 161 – 8 = PIN CAM WITH
36
DRIVE CLIP.
30
25 & 3/4
22 & 1/2
TIMING
20
CAMS
18
16 & 2/3
15
75
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
START MECHANISMS OLD STYLE
START MECHANISM CAMS
76-92-1
76-92-2
76-92-3
76-92-4
76-1003-1
MECH. WASCO. O.S. 115V
76-1003-2
MECH. WASCO. O.S. 220V
REPLACES 76-1003
RELAY COILS
76-1008-1 230V
76-1009-1 115V
O.S.
START MECHANISMS NEW STYLE
FOR WASCOMAT
N.S.
76-1040-1
MECH. SQ. 220V
76-1030-11
MECH. WASCO. N.S. 115V
REPLACES 76-1030-1
76-1030-12
FOR SPEEDQUEEN
MECH. WASCO. N.S. 220V
REPLACES 76-1030-2, 7610302
76-1030 START MECHANISMS TIMER MOTORS & SWITCHES
76-6010-1
00-6190
MOTOR 115V NS
FOR WASCOMAT START
MECHANISM 76-1030-11
SWITCH WITH LEVER
00-6189
SWITCH WITH NO LEVER
76-6010-2
MOTOR 220V NS
FOR WASCOMAT START
MECHANISM 76-1030-2
76
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
SWITCHES
“A” SWITCH FOR SINGLE SWITCH
DRYER 5900 COIN METERS
00-6003
00-6006
00-6163
00-6164
00-6167
00-6169
00-6176
00-6057
00-6065
“B” SWITCH FOR DOUBLE SWITCH
DRYER 5900 COIN METERS
00-6004
00-6008
00-6165
25 AMP
REPLACES 00-6168
25 AMP
00-6098
FOR WASCOMAT N.S. START MECHANISMS
00-6005
00-6190
SWITCH FOR 8325 COIN METER
REPLACES 00-6168
SWITCH WITH LEVER FOR 76-1030 N.S.
WASCOMAT WASHER START MECHANISM
00-6189
SWITCH FOR 76-1030 N.S. WASCOMAT
WASHER START MECHANISM
76-1205
SWITCH SET FOR 76-1003 O.S. WASCOMAT WASHER
START MECH
REPLACES 76-1005-1, 76-1006-1, 76-43, 76-43-44 & 76-44
50-86-1
SWITCH
FOR O.S. 8300 METER
77
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
41-6004
COIN CHUTE EXTENSIONS
87-1033
74-94-2
N.S. SPEEDQUEEN EXT. PULL
OPTICAL SWITCH, COIN
FOR DROP COIN METERS
CHUTE EXTENSION
FOR G.E. WASHER
74-1014
CHUTE EXT. FOR G.E. DRYERS
84-1135
KIT1737
74-23
CHUTE EXT.
FOR WHPL. DRYERS
COIN FUNNEL FOR METER CASE
TIMER, G.E. & SQ.
525A
CHUTE BOLTS
COIN CHUTE SPRAY
SILICONE LUBRICANT
USED ON V8 & V5 COIN CHUTES
77-83
LENGTH: 6 1/2”
77-83-7
LENGTH: 8 1/4”
68-1164
CHUTE EXTENSION
FOR WHIRLPOOL WASHERS
10 OZ. CAN
DRY SILICONE
LUBRICANT.
12 CANS PER CASE
FOR MANY
APPLICATIONS
REPLACES 540
78
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR GREENWALD
DIGITAL COIN ACCEPTORS & COMPONENTS
COIN COUNTER BOARD
ACCEPTOR & COUNTER
41-1040
41-1045-3
41-1038-5
115V
FOR 4100 DROP COIN METERS
REPLACES 25-1000,
41-1038-6 & 41-1038-7
MANUAL DRYER TIMERS
115 VOLT
15-1000-1
15 MINUTE
15-1000-2
30 MINUTE
15-1000-3
60 MINUTE
FOR HUEBSCH - S.Q. DRYERS
REPLACES ALL HAYDON AND CONTROLS CO. OF AMERICAN TIMERS.
79
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR IDC – CISSELL
DA407
LINT SCREENS
BRONZE BUSHING
WITH WIRE FRAMES
CSA00817-0
24”
CSA00839-0
20”
SCREEN 24” X 24”
FOR 20, 25, 30
& 50 lb. MODELS
SCREEN 20” X 20”
FOR 75 lb.
MODELS
24”
DA422
BEARINGS
PILLOW BLOCK
1 3/8” BORE
DA487
3 HOLE FLANGE 1” BORE
DA402
DA403
DA404
DA429
DA453
DA454
DA480
20”
BELTS
CSA01036-0
DA421
DA420
IDC SPIDER, 3 BAR
4 HOLE FLANGE
1 3/8” BORE
3 HOLE FLANGE, 1” BORE
FOR ID30
STACK
MODELS
FIXED THERMOSTATS
EA243
MD00354-0
ADJUSTABLE THERMOSTAT
GASKET
EA226
EA00606-0
SAFETY THERM.
EA244
OPERATING THERM.
EA400
EA402
EA420
MD00336-0
64 1/4” LONG
REPLACES MDA336
MDA300
44” LONG
MD00300-0
GLASS GASKETS
INDICATOR LIGHTS
EA253
ROUND 110V
EA253A
ROUND 220V
51 1/4” LONG
MDA300FT
GLASS GASKET
50 FOOT LONG
BULK BOXED
80
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
GA614
THERMCOUPLE, 24”
FOR IDC – CISSELL
BASO GAS VALVES & COILS
SWITCHES
GA643A
EA555
120V BLUE COIL
DOOR SWITCH
6 TERMINAL
GA644A
230V BLUE COIL
EA213
DOOR SWITCH
EA231
GA669
NUT MOUNT SWITCH
110V VALVE WITH BLUE
PLASTIC COIL
GA670
230V VALVE WITH BLUE
PLASTIC COIL
GAS BURNER TUBES
ELECTRONIC IGNITORS
GA739
GA712A
GA765
BURNER TUBE SHORT
17 1/4”
24 VOLT
USED WITH
GAS VALVE #
GA00770-0
REPLACES
FENWALL
GRAY BOX
GA756
BURNER TUBE LONG
24”
DOOR GASKETS
MDA304
MDA304A
EA00477-0
DA00424-0
TRANSFORMER, STEP-DOWN
FROM 115V. TO 24V
1/3 HP. SINGLE PHASE, 1725/1425 RPM, 115/230
VOLT. FOR ROUTE OPERATORS MODELS 25 lb.
AND SMALLER SINGLE DRUM. FOR 30 SLIM
LINE MODELS
NEW
ITEM
81
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
DRYER IGNITORS AND SENSORS
G.E.
MAYTAG
ADC 128910
REPLACES
WHIRLPOOL 686590
R.S. WRC23
Z716K
239300
FLAT GLO BAR KIT, 25 PER KIT
IGNITOR
12 PER BOX – 144 PER CASE
REPLACES
WHIRLPOOL 279311 & R.S. WRC23K
REPLACES ROUND GLO BARAND
MOUNTING BRACKET
REPLACES
FRANKLIN F79102
FRIGIDAIRE 1126982
GENERAL ELECTRIC WE4X444
MAYTAG 3-3376, NORGE 63-5010
SPEEDQUEEN 55438
WESTINGHOUSE Q60083
WHPL 239300, Z711 & WRC22
338906
60868
WE4X739
SENSOR
IGNITOR FOR
SQ # 56408, 56970, 58823 & 510184P
R40069801P
IGNITOR
FOR
MTG. 3-3377
S.Q. 56231 & 55428
NORGE 63-5013
FRIGIDAIRE
0635993 & 8001684
FRANKLIN 78913
WEST. Q600651
WHLP. 338906
WE4X448
L204
L206
FOR G.E.
PILOT UNLATCH 11”
PILOT UNLATCH 16 ”
REPLACES
3-2814
339639
63-1572
WE1X715
PUL115
FOR
MAYTAG
WHPL
MAYCOR
G.E.
MTS
REPLACES
53377E
61-1665
6593443
PUL125
FOR
S.Q.
MAYCOR
FRIG.
MTS
L208
PILOT UNLATCH
82
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WASHER INSTALLATION ACCESSORIES
CLEAR DRAIN HOSES
2HOSE
2” DIAMETER
3HOSE
3” DIAMETER
238HOSE
2 3/8” DIAMETER
BLACK RUBBER UNIVERSAL DRAIN HOSE TO 1”
BE7572
1” ID.
7/8” ID.
3/4” ID.
5”
FOR AUTOMATIC
MACHINES. 3/4” X
6’ LONG. WITH
EXPANDER TO FIT 5”
7/8” OR 1” OUTLETS.
6” WITH 90º ELBOW
MADE IN U.S.A.
72” TOTAL
60”
REPLACES
WH41X184
72” TOTAL
BE7572SE
BLACK RUBBER HOSE FOR WHLP DIRECT DRIVE MODELS
AND OTHER MFG. WITH 1” OUTLETS. 25 PER BOX
1” ID. 7/8” ID. 3/4” ID.
REPLACES WHLP #96743 & PVC HOSE
BLACK RUBBER UNIVERSAL DRAIN HOSE TO 1 1/4”
BE7574
BE7574SE
BLACK RUBBER UNIVERSAL DRAIN HOSE WITH 90º ELBOW FOR
LATE G.E. WASHERS WITH ELECTRIC MOTOR PUMP WITH 1/4”
OUTLET.
1” ID.
BLACK RUBBER HOSE
UNIVERSAL DRAIN HOSE WITH STRAIGHT END
1 1/4” ID.
1 1/8” ID.
1” ID.
REPLACES
WH41X367
1 1/4” ID. 1 1/8” ID.
72” TOTAL
72” TOTAL
UNIVERSAL WASHING MACHINE DRAIN HOSE
CRUSH RESISTANT · NON-KINKING · FLEXIBLE
PART #
DESCRIPTION
WDH6FT 6 FT HOSE
WDH8FT 8 FT HOSE
PLASTIC
1 1/4”
BLACK
1” ID.
FOR LATE MODEL WASHERS
PVC DRAIN HOSES
HP416
6FT
HP418
8FT
REPLACES WH41X367 & WH41X184
WH41X184
DRAIN HOSE
BLACK
RUBBER
83
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
GRAY PVC
WASHER INSTALLATION ACCESSORIES
PART #
SSD-4
SSD-6
SSD-8
SIZE
CONNECTOR
1” ID x 4ft.
1” ID x 6ft.
1” ID x 8ft.
REPLACES ALL MAKES OF WASHER DRAIN HOSES
INCLUDING G.E. PARTS # WH49X177 & WH41X184
PART #
SSD6GE
DESCRIPTION
FOR G. E. # WH41X367
DIRECT DRIVE MODELS
PART #
SIZE
SSD-4EL
SSD-6EL
SSD-8EL
1” ID x 4ft.
1” ID x 6ft.
1” ID x 8ft.
PART #
SIZE
SSD-5PF
HP416
HP418
1” ID x 5ft.
1” ID x 6ft.
1” ID x 8ft.
CONNECTOR
CONNECTOR
84
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WASHER INSTALLATION ACCESSORIES
1404
111-10A
1195A
BULK HOSE, BLACK
ALL SMOOTH RUBBER. 1” I.
D. 50’ LONG MADE IN U.S.A.
50 FT. PER BOX
1” ALUMINUM HOOK
CHROME “Y” MIXER
REPLACES N1000
1195BR
BRASS “Y” MIXER
BOLTS
J5 5/8” x 5-7 / 8”
J6
1/2” x 6”
J7
5/8” x 7-7/8”
1172
HM101
NYLON HOSE CAP
1” HOSE MENDER
FITS HOSE
GREEN
HL103
1455C
1” HOSE MENDER, ELBOW
TWIN MIX F STYLE
FOR HOOKING UP WASHER
TO A SINGLE FAUCET
WHITE NYLON
A92
FILTER HOSE WASHER
COARSE SCREEN
SOLD IN UNITS OF 100
WHITE NYLON
GSW300
HOSE WASHER GREEN STRIPE
NEOPRENE WASHER
FOR HOT & COLD WATER. HIGH
PRESSURE PACKED,
SOLD IN UNITS OF 100
CHROME
10-5632
BACKDRAFT DAMPERS
REDUCER COUPLING
(3” X 2”)
GALVANIZED STEEL, DUAL FLAP
BD4
4”
DOUBLE FLAPPER VANES
85
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WASHER INSTALLATION ACCESSORIES
HIGH PRESSURE INLET HOSES
3/8” ID.
253 3FT
254 4FT
255 5FT
256 6FT
258 8FT
260 10FT
STAINLESS STEEL HOSE
3/8” ID. WITH ELBOW 90º
254A
255A
256A
258A
260A
3/8” ID.
4FT
5FT
6FT
254SS
255SS
256SS
8FT
10FT
4FT
5FT
6FT
“FIRST LINE”
1/2”
FIRST LINE OEM SPEC.
254 – 2
255 – 2
256 – 2
MADE IN U.S.A.
3/4”
255 – 3
256 – 3
MADE IN U.S.A.
25 PER BOX
BLACK
K1648
APPLIANCE CORD, 8FT 16/3
FOR WASHERS, GAS DRYERS
AND DISHWASHERS
GRAY
16/3 WIRE,
8 FT LENGTH,
1/2” STRIPPED ENDS
HYP38
“Y” MIXER HOSE HIGH
PRESSURE HOSE WITH
ARMS 12” LONG.
DOUBLE COUPLED
WITH STEEL FITTINGS.
PRESSURE TESTED “Y”
CASTING.
HYP38-2
513P
1/2”
HOSE CONNECTOR
FOR COUPLING
HIGH PRESSURE
HOSES TOGETHER
3/8”
BLACK
25 PER BOX
BLACK NYLON
86
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
513BR
BRASS HOSE
CONNECTOR
DRYER VENTING & INSTALLATION ACCESSORIES
VENT HOODS
DV4
PLASTIC, 4”
DU260
P601
TAPES
SILVER DUCT TAPE
2” X 60’ LENGTH, 24 PER
ELECTRICAL TAPE
3/4” X 66’ LENGTH
DU250AL
DV4L
PLASTIC
WITH LOUVERS, 4”
ALUMINUM METAL DUCT TAPE
TEMP RATING = 150°F - 180°F
2” X 50’ YARD ROLL ALUMINUM
METAL TAPE WITH PEEL-OFF PAPER
BACKING 1 CASE = 24 ROLLS
GA5–520
TEFLON TAPE
1/2” X 520” LENGTH
BLACK VINYL
INSULATING TAPE.
FLAME RESISTANT. U/L
APPROVED.
INDIVIDUALLY
WRAPPED. 10 PER BOX –
200 PER CASE
MT60
MASKING TAPE
3/4” X 60’ YARDS
EASY TO USE – SAFE TO HANDLE. ELIMINATES THE NEED FOR
MESSY LIQUID OR PASTE DOPES-THE IDEAL SEALANT FOR
ALL THREADED FITTINGS.
48 PER CASE.
ALUMINUM DUCTING
DIAMETER
LENGTH
TYPE
PER CASE
4”
4”
4”
6”
6”
4”
4”
5’
8’
20’
6”X5’
6”X8’
25’
50’
HARD
HARD
HARD
HARD
HARD
SOFT
SOFT
8
8
12
3
3
1
1
FD45A
FD48A
FD420A
FD65A
FD68A
FD425AS
FD450AS
NEW
ITEM
WHITE VINYL FLEXIBLE DUCTING
FD45 4” X 5’
FD48 4” X 8’
FD420 4” X 20’
FD350 3” X 50’
FD450 4” X 50’
MADE IN U.S.A,
MARKED WITH A
BLUE DOT AT EACH
FOOT TO ALLOW FOR
EASY AND
ACCURATE CUTTING.
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
VB KITAS
VB KIT
SOFT ALUMINUM INDOOR
VENT KIT , 4” X 5’ DUCTING
VINYL INDOOR VENT KIT
4” X 5’ DUCTING
VENT KITS
FVK45
FVK45A
FVK48
FVK48A
VINYL, 4” X 5’
ALUMINUM, 4” X 5’
VINYL, 4” X 8’
ALUMINUM, 4” X 8’
NEW
ITEM
VC425
4” VENT CLAMP
87
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
INSTALLATION ACCESSORIES
STAINLESS STEEL HOSE CLAMPS
SIZE # MIN I.D. MAX I.D.
B96H
B116H
CC6
CC8
CC10
CC12
CC16
CC20
CC24
CC28
CC32
CC36
CC40
CC48
CC52
CC64
CC72
CC88
5 – 5/8”
6 – 1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
3/4”
1”
1 1/4”
1 1/2”
1 3/4”
2”
2 5/16”
3 1/4”
3 5/16”
4 1/8”
5”
3/4”
1”
1”
1 1/4”
1 1/2”
1 3/4”
2”
2 1/4”
2 1/2”
2 3/4”
3”
3 1/4”
4”
4 1/4”
5”
6”
MADE IN THE U.S.A.
1/2”
ALL CLAMPS
IN STOCK FOR
IMMEDIATE SHIPMENT
10 PER
BOX
QUANTITY PRICING
AVAILABLE
ON ALL CLAMPS
MINIATURE HOSE CLAMPS
SIZE #
SC4
SC6
SC10
MIN I.
MAX I.D.
1/4”
1/2”
1/2”
5/8”
3/4” REPLACES M6P
1”
SIZE #
10 PER
BOX
3/8”
I.D.
2”
CW2
CW 2 – 3/8 2 3/8”
3”
CW3
10 PER
BOX
FOR COMMERCIAL /
COIN OP WASHER
RIBBED DRAIN HOSE
EXACT APPLICATION CLAMPS
PART #
WH1X1292
WH1X1580
284951
BAND
HEIGHT
DESCRIPTION
FOR GE, USED ON WH8X246 BOOT SMALL
FOR GE, USED ON WH8X246 BOOT LARGE
FOR WASCOMAT
1/2”
1/2”
3/8”
DRYER VENT CLAMP
PART #
DESCRIPTION
VC425
CLAMP FOR 4” VENT
2540
WIRE CLAMP FOR 4” VENT
1/2”
88
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MAYTAG
V BELT BRANDED
BELTS
WASHER BELTS
FOR WASHERS & DRYERS
211124
211125
211451
211948
251023
211948-2
22003483
MULTI V BELT
DRYER BELTS
REPLACES 2608400
312959
313328
314774
33002535
63713880
V BELT
DRYER BELTS
311012
311013
301162
301163
331162
331163
MULTI V BELT
V BELT
2-11124-25K
BELTS, ROLLERS &
SPRINGS KIT
201112
21001108
206638K
SIPHON BREAK
PULLY MOTOR
SIPHON BREAK
NEW
ITEM
NEW
ITEM
WASHER INJECTOR SYSTEMS
213015
NOZZLE
NEW
ITEMS
NEW
ITEM
213016
INJECTOR
NEW
ITEM
89
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MAYTAG WASHERS
BELTS, ROLLERS & SPRINGS
212716
MOTORS
205000
201807
201805
ROLLER & SPRING KIT
LID BUMPER
NEW
ITEMS
BEARINGS
200720
2-835
NEW
ITEM
211952
ROLLER
4 REQUIRED
12001514
2-11124-25K
SWITCH ASSEMBLY
WITH FUSE
BELTS, ROLLERS
& SPRINGS KIT
202718
SPRINGS
NEW
ITEM
SWITCHES
201809
207166
206417
264170
900882
908822
SWITCH LONG PLUNGER
SWITCH
SWITCHES WITH ARM
LID SWITCHES
2001908 & 22003440
NEW
ITEM
22001682
WASHER LID SWITCH
ASSEMBLY , 4 AMP.
COMPLETE WITH FUSE
NEW
ITEM
201823
201946
202770
205415
206415
300059
305798
305799
12001187
PRESSURE SWITCHES
203970
304575
304576
305753
305754
205337
3 PUSH BUTTONS
REPLACES 203362, 233621
REPLACES 203971
205336
4 PUSH BUTTON, FOR
LATE MODELS
REPLACES
203169, 253361
90
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MAYTAG WASHERS
22204012-0
STEM KIT
FOR HELICAL DRIVE WASHERS
FROM 1959 TO PRESENT
REPLACES 204012 & 2-4012
204663
205033
205143
NEW
ITEM
TIMER MOTORS
300113
22205033
UNIVERSAL WASHING MACHINE DRAIN HOSE
CRUSH RESISTANT · NON-KINKING · FLEXIBLE
PART #
DESCRIPTION
WDH6FT 6 FT HOSE
WDH8FT 8 FT HOSE
TUB BEARING KIT,
FOR
HELICAL DRIVE
WASHERS FROM
1959 TO
PRESENT
212815
213055
DISPENSER CUP
HOSE INJECTOR TUBE
REPLACES # 202472 & 206154
204013
22204013
EBMW
211726
MAYTAG WASHER
REPAIR BOOK
LID HINGE BALL
WATER VALVES
22002707
FOR OLD
& NEW
MODELS
200746
2 REQUIRED PER MACHINE
202203
PUMP, FOR AUTOMATIC MODELS
FROM 1958 TO PRESENT
231774
204028
205613
205614
22001275
91
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
PARTS FOR MAYTAG
27-4002
8-1000-22
215033
7-35
CHUTE BOLT
MONEY BOX LOCK & KEY
KEY SERVICE DOOR
LOCK & KEY,
SERVICE DOORS
5 7/8”
WITH FINE THREAD
FOR O.S. TOP
LOAD WASHERS
& DRYERS
REPLACES ZB7
160036
MONEY BOXES FOR TOP LOAD WASHERS & DRYERS
MONEY BOX LOCK & KEY
MCB – G
MCB – W
MCB – A
LESS LOCK &
KEY
GOLD FACE
WHITE FACE
ALMOND FACE
DIMENSIONS
H = 3 1/8”
W = 3 5/8”
D = 5 1/2”
PLEASE INDICATE CORRECT
COLOR WITH ORDER.
USED WITH LOCK & KEY
ASSEMBLY 8-1000-22 ABOVE
12 7/8”
USE 8-1000-22
LOCK & KEY
MUST GIVE MODEL #
FOR DRYER
MFG.
BY ADC
FOR MDG-32 MODELS
TIMERS
VERTICAL V4, V5 & V8 COIN CHUTES
PART #
DESCRIPTION
V4-25
.25 CENTS
FOR COIN-OP
205424
208462
22001083
NEW
ITEM
V5 LOONEY LOONEY
V5-100
$1.00
V5-125
$1.25
V5-25
.25 CENTS
V5-50
.50 CENTS
330083
V5-75
.75 CENTS
ADJUSTABLE THERMOSTAT
V8-100
$1.00
V8-125
$1.25
V8-150
$1.50
V8-175
$1.75
V8-200
$2.00
V8-25
.25 CENTS
V8-50
$8.50
V8-75
$8.753
FOR COIN-OP
LARGE CAP
DRIVERS
NEW
ITEM
92
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MAYTAG DRYERS
DRYER BELTS
V BELT BRANDED
312512
312544
33001003
33001808
FILTER
53-0918
LINT FILTER
LINT FILTER
NEW
ITEM
MULTI V BELT
312959
313328
314774
MINI DRYER FAN BELTS
311012
311013
301162
301163
331162
331163
REPLACES
306666
NEW
ITEM
12 1/2”
33001171
NEW
ITEM
NEW
ITEM
12 1/4”
LINT FILTER
12 1/2”
14 1/2”
7 1/2”
10”
7 1/2”
5 3/4”
303836
THERMOSTATS
STYLE G
303396
301451
303395
STYLE F
303392 301952
300608 301724
301007 301948
303035 301552
306060 303391
300859 305864
BLOWER WHEEL
REPLACES 312913
IGNITORS & ACCESSORIES
304970
NORTON FLAT IGNITOR
MOTORS
303358
303376
306055
GLO BAR IGNITOR
NEW
ITEM
303377
GLO BAR SENSOR
USED WITH 3-12959 BELT
93
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MAYTAG DRYERS
GAS VALVE COILS & COIL KITS
305603
304680
NEW
SECONDARY COIL
ITEM
DOOR SWITCHES
301336
COIL KIT, WIRED, EXACT
FOR K VALVES
305604
HOLDING COIL
306106
306105
DUAL COIL
SINGLE COIL
NEW
ITEM
FOR GAS &
ELECTRIC
MODELS DE/DG90
THROUGH DE/
DG606, 1966
THROUGH 1980
REPLACES 301320,
302455 & 303370
SQUARE
304575
304576
305753
305754
305605
BOOST COIL
NEW
ITEM
FOR WHITE RODGERS
“M” VALVES SINCE 1984
FOR K VALVES
12001348
12001349
303963
312948
SET OF 3
SET OF 2
INDICATOR LIGHT
DRUM ROLLER SHAFT
FOR 303373 ROLLER
303318
302814
SWITCH WITH NUT MOUNT
11” CAP PILOT UNLATCH
NEW
ITEM
303705
306436
306604
IDLER PULLEY
USED WITH 3-12959
BELT FOR
COMMERCIAL &
DOMESTIC LARGE
CAPACITY MODELS
1978 THROUGH
DOOR LATCH KIT
DRYER FUSE
NEW
ITEM
NEW
ITEM
NEW
ITEM
REPLACES 304578
12001541
DRUM ROLLER
FOR GAS & ELECTRIC
MODELS SINCE 1984,
2 REQUIRED PER
MACHINE
REPLACES
303373
NEW
ITEM
33302528
306508
PUSH BUTTON SWITCH
FOR GAS & ELECTRIC MODELS
DE/DG606 & DE/DG806
DRUM SLIDE REPAIR KIT
INCLUDES RIVETS
NEW
ITEM
NEW
ITEM
94
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION PURPOSES.
FOR MILNOR – COMMERCIAL
RELAYS
09C060
09C063AB37
MAIN RELAY, 240V.
120V.
09C01DDD24
09C063
09C063AC37
24V.
120V.
120V.
09C01DDD37
09C063A
09C063AE37
11 TERMINAL, 115V.
120V.
120V.
09C01DDD71
240V.
0203343
0210342
09D020
PINCH TUBE
DOOR GASKET
FUSE SLOW
BLOW 2.8 AMPS
REPLACES 09FF002AHG
09N086A
SOLENOIDS FOR DUMP VALVES
WATER LEVEL CONTROL
09K061B
230V.
09K061D
115V.
38C058
QD TIMER
ROTARY COIN SWITCH,
FOR DROP COIN METER
09T045
TRANSFER
YOUR OWN
LEVER.
WITH 2 MOTORS
09T045D37R
VARIES WITH
95
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR MILNOR
KHB0B00337-RK
HAYS DOUBLE INLET VALVES
HAYS – REPAIR KIT 1/2”
96P016A71
240V.
KHB0B00324
24V.
KHB0B00337
115V.
CAPACITORS
DRAIN VALVES
KHMTRCAP02
125V. 413MF
KHMTRCAP0
3
96D350A37
115V. 3”
96D350A71
220V. 3”
HAYS VALVES
09R002PBSW
PUSH BUTTON SWITCH
A36
A38
AX32
AX33
AX34
AX35
AX36
AX37
AX38
AX71
AX78
96P053
96P151
3/4” 24V.
1 1/4” 24V.
96P053A37
96P151A37
3/4” 110V.
1 1/4” 110V.
96P053A71
96P151A71
3/4” 240V.
1 1/4” 240V.
BELTS
COGGED BELT
V BELT
96
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
CROSS REFERENCE
OLD #
54R006
54R007
54R003
54R009G
54R008
54R006A
54R006B
54R007B
54R010
54R012
54R110
54T068
NEW #
A36
A38
AX33
AX34
AX35
AX36
AX37
AX38
AX71
AX78
5L720
BX35
RAM ELECTRONICS
CDS1 & 2
SAVE FUEL COST – $1000 TO $2000 SAVINGS PER YEAR
ON EVERY 12 DRYERS WITH STANDING PILOT LIGHTS –
JUST BY INSTALLING RAM IGNITORS. THIS SAVINGS
ALONE ASSURES THAT THE RAM IGNITOR WILL PAY
BACK IN LESS THAN 18 MONTHS
SAVE ELECTRICAL ENERGY – $1000 SAVINGS
PER YEAR ON EVERY 12 DRYERS. RAM
IGNITORS USE ONLY 1/100TH OF THE
ELECTRICAL ENERGY REQUIRED TO POWER
RESISTANCE ( GLO BAR) TYPE IGNITORS
CDS1 & 2
SAVE DOWN TIME – NO NEED TO CHANGE
STANDARD KIT – FOR ALL LARGE CAPACITY THERMOCOUPLES OR RELIGHT PILOTS WITH THE
DRYERS WITH STANDING PILOT LIGHTS.
DEPENDABLE RAM IGNITION SYSTEM.
FOR GLO BAR MODELS
QDK1 FOR PILOT LIGHT MODELS CDS1
CDS2
115V KIT
CDS3
FOR FENWALL MODELS
CDS5
FOR G60 BASO MODELS
REPLACES IDC #’s GA712A & GA765 IGNITOR & WIRES
NOT INCLUDED REPLACES FENWALL GRAY BOX
HV1NS
CP200
HIGH VOLTAGE WIRE
PROBE FOR CDS5
LENGTH
30”
USED WITH IGNITOR
SYSTEMS QDK1, CDS1, CDS2 & CDS5
O.S. SPADE IGNITOR
REPLACES CP20 O.S. PROBE
IGNITOR BP202B N.S.
FOR
CDS1
LATE STYLE ROUND TERMINAL CDS2
QDK1
REPLACES BP202
97
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR PRIMUS
347006060
TIMERS
MAIN TIMER
L.E.D. DISPLAY BOARD
343000057
W TYPE
REVERSE TIMER
220V.
343000058
343000055 220V.
343000056 110V.
110V.
R TYPE
343000059 220V.
347000060
345000046
348011091
COIN STEPPER
CONTACTOR, 220V.
SELECTOR SWITCH 6 BUTTON
610019077
610012077
610000122
LOWER DOOR SOLENOID
W TYPE
DOOR SOLENOID R TYPE
DOOR HINGE
340055051
INLET VALVES, 2 WAY
DRAIN VALVE R TYPE, 220V.
340010035 110V.
340020035 220V.
346000003
BEARING KIT
BIMETAL
FOR W7 & R7
INCLUDES AXIAL RING,
COUNTER RING & BEARINGS
98
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
INSTALLATION – TAPES
TAPES
P601
MT60
DU260
BLACK ELECTRICAL TAPE
U/L APPROVED
MASKING TAPE
3/4” X 60 YARDS
SILVER DUCT TAPE
2” X 60 YARDS
BLACK VINYL TAPE. FLAME
RESISTANT. U/L APPROVED 3/4” X
66’ PACKAGED IN LOTS OF 10.
INDIVIDUALLY WRAPPED
10 PER BOX – 200 PER CASE
24 PER CASE
DU250AL
GA5-520
ALUMINUM METAL DUCT TAPE
TEMP RATING = 150°F - 180°F
2” X 50’ YARD ROLL ALUMINUM
METAL TAPE WITH PEEL-OFF PAPER
BACKING 1 CASE = 24 ROLLS
TEFLON THREAD SEAL TAPE
1/2” X 520”
EASY TO USE – SAFE
TO HANDLE
ELIMINATES THE NEED
FOR MESSY LIQUID OR
PASTE DOPES.
THE IDEAL SEALANT FOR
ALL THREADED FITTINGS.
CT220
PT103
K1648
CLEAR PLASTIC
PRESSURE SWITCH
TUBING 3/16” (I.D.) 100
FT. COIL (BOXED)
APPLIANCE CORD
FOR WASHERS, GAS DRYERS
AND DISHWASHERS
16/3 WIRE 8 FT. LONG 1/2”
STRIPPED ENDS
0° TO 200°
STAINLESS STEEL
99
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WATER VALVES
WASHER VALVES
DIRECT DRIVE
MODELS
FOR COIN-OP & DOMESTIC WASHERS
EXACT
FOR G.E. DIRECT
DRIVE WASHERS
NEW
ITEMS
EXACT
3952164
22002707
FOR LATE
WHIRLPOOL
FOR LATE MAYTAG
WH12X10074 & WH13X86
39069P
N1003S
CW10
CW11
3357901
3 COIL
VALVE
O.S. UNIVERSAL
CROSS REFERENCE
OLD #
NEW #
CW153
CW52
L525
CW152
CW154
CW50
CW10
CW11
EXACT
CW151
UNIVERSAL
099798
220V. 1/2”
FOR MODELS W183 & 184
REPLACES 098906 & 099919
FOR LATE WHIRLPOOL
WASHER VALVES
FOR COIN-OP WASHERS
FOR WASCOMAT
824302
220V.
823405
824303
SINGLE, 230V.
449
449
CW151
CW151
CW151
CW151
N1003S
N1003S
098905-0
220V. 3/4”
FOR MODELS W183 & 184
REPLACES 099796 & 099918
115V. FOR W75 & 105
842303
115V.
823405
SINGLE, 230V.
920090
VALVE, ONE COIL 115V.
FOR GEN 4 MODELS
823504
FOR GEN 4 MODELS
823603 COILS, WHITE
DOUBLE, 220V.
823505
TRIPLE, 220V.
DOUBLE, 220V.
823604
COILS, BLACK
TRIPLE, 115V.
823506
FOR GENERATION
5 MODELS
823507
DOUBLE, 110V.
DOUBLE, 110V.
FOR GENERATION
5 MODELS
823654
TRIPLE,
3 COLORED COILS 115V.
823554
823653
DOUBLE, 230V COLORED COILS
TRIPLE,
3 COLORED COILS 230V.
823557
DOUBLE, 2 COLORED COILS 115V.
100
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WATER VALVES
FOR COIN-OP WASHERS
FOR MILNOR
96P016A71
HAYS 240V.
KHB0B00324
HAYS 24V.
KHB0B00337
CW151
DOUBLE, 115V.
UNIVERSAL
TOP LOAD WASHERS
FOR UNIMAC
F730455
4 COIL VALVE, 115V.
3 OUTLETS
1 INLET
F380715
4 COIL WATER
VALVE, 115V.
4 OUTLETS
FOR SPEEDQUEEN
93026
85059
OUTLETS
1 INLET
DOUBLE VALVE 115V.
OUTLETS
1 INLET
DOUBLE VALVE 115V.
FOR DEXTER – IPSO
27156
33930
38495
9379-183-001
1 INLET
DOUBLE VALVE
115V.
9379-183-002
230V.
209-00110-00
230.
101
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WATER VALVES
COIN – OP REPAIR KITS
W7438K2
W7438K1
DOUBLE REPAIR KIT
FOR EATON USA VALVE
SINGLE REPAIR KIT
FOR EATON USA VALVES
FOR UNIMAC
FOR UNIMAC
F380938
FOR MILNOR
F380914
HAYS REPAIR KIT 1/2”
F380915
MUELLER KIT 10 MM.
KHB0B00337-RK
F380939
REPAIR KIT 1/2”
VALVE REPAIR KIT
F380968
HAYS REPAIR KIT 3/4”
DIAPHRAGM FOR
F730455 & 6
FOR WASCOMAT
099930
FOR WASCOMAT
FOR 3/4” VALVE
665718
099932
DANFOSS REPAIR KIT
FOR 1/2” VALVE
102
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
WATER VALVE PARTS
VALVE COMPONENTS
208230
208230-2
208230-24
W7303
COIL, 120V.
COIL, 220V.
COIL, 24V.
VALVE GUIDE
W7301
W7307
W4040
WATER VALVE SPRING
SCREEN
ARMATURE
DIAPHRAGMS
FOR UNIMAC
FOR WASCOMAT
F380969
DIAPHRAGM 13 MM.
F380970
MUELLER DIAPHRAGM
10 MM.
690050
099907
DIAPHRAGM 3/4”
DIAPHRAGM 1/2”
FOR MODELS W183 & 184
FOR WASCOMAT
FOR SEIMANS VALVE
099906
823492
WITH BLUE TOP, FOR ELBI
BLUE
TIP
FOR EATON USA VALVES
W7438
VALVE SEAT
103
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
W7438N
FOR 823 VALVES
FOR WASCOMAT
WATER VALVES
ACTUATING VALVE
823405
824302
SINGLE, 230V.
220V.
824303
115V. FOR
W75 & 105
823654
823504
TRIPLE,
3 COLORED COILS 115V.
FOR GENERATION 5 MODELS
DOUBLE, 220V.
823653
823506
TRIPLE,
3 COLORED COILS 230V.
FOR GENERATION 5 MODELS
DOUBLE, 110V.
823505
DOUBLE, 220V.
823507
DOUBLE, 110V.
098905-0
823603
HONEYWELL – SKINNER
TRIPLE, 220V.
BRASS VALVES
220V. 3/4” FOR MODELS
W183 & 184
REPLACES 099796 099918
TRIPLE, 115V.
823604
099798
823554
BRASS VALVES
220V. 1/2”
FOR MODELS W183 &
184
REPLACES 098906 &
099919
2 COIL 230V, FOR GEN. 5
COLORED COILS
823557
DOUBLE, 2 COLORED COILS
115V. FOR GENERATION 5
MODELS
104
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
INDICATOR LIGHTS
922735
180201
RED LIGHT ASSEMBLY, 115V.
REPLACES 110203
RED LENS W74, 124, 184
110103
LIGHT 230V.
922734
220V. FOR W73, 123
VALVE REPAIR KITS & DIAPHRAGMS
099930
099932
FOR 3/4” VALVE
FOR 1/2” VALVE
099906
099907
DIAPHRAGM 3/4”
DIAPHRAGM 1/2”
665718
W7438N
823492
FOR 823 VALVES
IMPORT
WITH BLUE TOP, FOR ELBI
BLUE
TIP
W7438
DANFOSS
REPAIR KIT
FOR EATON U.S.A.
690050
FOR SEIMANS
VALVE O.S.
FOR MODELS W183 & 184
284951
WIRE HOSE CLAMPS
CLAMP
099924
3”
099939
2 3/8”
099942
2”
FOR RIBBED DRAIN HOSE
105
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
BELTS
770104
770151
770153
770154
900750
BELT W71, W121 – W124
900762
BELT FL145, W125 – 181
903351
BELT W185 – EX22
BELT W183
REPLACES 770152
770156
770159
900556
900576
900637
920505
BELT FL75 – 244
922457
BELT FLE220
FOR 75 lb.
922547
900662
BELT FLE220
BELT W73, W74, W105
ROTARY SWITCH, CONVERSION KIT AND KNOBS
099869
961701
ROTARY CONVERSION KIT
TO REPLACE PUSH
BUTTON SWITCH
ROTARY SWITCH
USED WITH ROTARY KNOBS 182302
(WHITE) & 520704 BLACK)
182302
520704
BLACK KNOB
520702
WHITE KNOB
STAINLESS STEEL HOSE
RUBBER HOSES
1/2” ID.
254 – 2
255 – 2
256 – 2
3/4” ID.
254 – 3
255 – 3
256 – 3
3/8” ID.
254SS
255SS
256SS
BLACK
WITH BRASS ENDS
WITH S.S. ENDS
4FT
5FT
6FT
25 PER BOX
MADE IN U.S.A.
MADE IN U.S.A.
106
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
DRAIN VALVES & MOTOR GEARS
675358
970400
MOTOR & GEAR, 220V. 2”
MOTOR & GEAR, 220V.
3” REPLACES 972701
675364
MOTOR & GEAR, 115V. 2”
970401
MOTOR & GEAR, 115V.
3” REPLACES 972702
080328-1
099878
115V. 3”
DUMP VALVE 220V. 2”
080328-2
099878-1
230V. 3”
DUMP VALVE 115V. 2”
099876
099885-1
DUMP VALVE O/F 220V. 2”
DUMP VALVE 115V. 2” NC
099877
DUMP VALVE O/F 115V. 2”
099807-1
DUMP VALVE KIT 115V.
099807-2
DUMP VALVE KIT 220V.
REPLACES
PANCAKE
SYSTEM
COIN DROP MECHS FOR KELTNER
W600154
080435
080446
SOAP BOX, COMPLETE
107
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
098958
GLASS GASKETS
410927
JR. & SR. GLASS GASKET
REPLACES 044002
410928
GIANT GLASS GASKET
007801
GASKET
044001
FOR MODELS
W75 & W105
046201
GLASS GASKET
FOR MODELS
W125 & W185
MOTOR SWITCH NS. INCLUDES WIRES
REPLACES
099792
ELECTRONIC
SWITCH & 957401
MECHANICAL
SWITCH
DOOR LOCK ASSEMBLIES KITS & COMPONENTS
007090
DOOR KNOB KIT GENERATION
5 WITH SCREWS & SPRINGS
REPLACES 007601
248711
DOOR LOCK ASSEMBLY
FOR ALL SQUARE DOOR
HANDLE
MODELS W73, 74, 123, 124, 183 &
248001
SQUARE DOOR HANDLE
FOR ALL SQUARE DOOR
HANDLE MODELS W73, 74, 123,
124, 183 & 184 USED WITH
248711 ASSEMBLY
& 931501 LATCH
931501
DOOR LATCH
FOR ALL SQUARE DOOR
HANDLE MODELS W73, 74,
123, 124, 183 & 184 USED
WITH 248711 ASSEMBLY &
248001 HANDLE
990075
780600
FLAT DOOR SPRING
FOR ALL SQUARE DOOR
HANDLE MODELS W73, 74,
123, 124, 183 & 184
USED WITH 248711 ASSEMBLY
& 248001 HANDLE
DOOR SOLENOID KIT
FOR ALL SQUARE DOOR HANDLE
MODELS W73, 74, 123, 124, 183 &
184 USED WITH 248711 ASSEMBLY
& 248001 HANDLE
10 PER BOX
REPLACES 099875, 456301,
955100 & 955501
108
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
SCREWS
132101
132742
ROUND HEAD
SCREW
FOR UPPER
FRONT PANEL
329142
133142
FLAT HEAD
SCREW, FOR
SOAP BOX
FOR LOWER
FRONT PANEL
229140
DIAPHRAGM, SEM DRAIN
601300
FOR W74, 124 & 184 FOR ORIGINAL DRAIN VALVES
243858
482901
240808
DOOR HINGE FOR ALL
GENERATION 3 & 4 MODELS
GLASS, DIAL GEN. 4
DOOR GLASS
601700
RELAYS
510109
DRAIN VALVE PIN USED ON
PANCAKE DRAIN VALVE
220V.
REPLACES 099766
511310
115V.
REPLACES 510309
513110
220V. K-16
FOR 50 lb. MODELS & UP
REPLACES 099765
290401
601200
VALVE TUB HOSE
FOR DRUM TO DRAIN VALVE.
RUBBER RING
FOR W74, 124 & 184
USED WITH 601300
MOTOR OVERLOADS
902680
FOR MODELS
W123 & 124
904146
FOR MODELS
W183 & 184
USED ON MODELS W74, 75,
124, 125, 184 & 185
109
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
SWITCHES
960313
SWITCH WITH LEVER
USED ON 248711 SQUARE
HANDLE LOCK ASSEMBLY
REPLACES 960307
LEVEL CONTROLS
080304
885002
SWITCH WITH NO ARM
USED ON N.S. START
MECHANISMS 080292 & 080293
PRESSURE SWITCH, FOR W73 & W74
6 TERMINALS
885004
PRESSURE SWITCH FOR W123 & 124
REPLACES 920189 & 920258
6 TERMINALS
885005
080305
PRESSURE SWITCH FOR W183 & 184
6 TERMINALS
907405
SWITCH WITH LEVER
USED ON N.S. START
MECHANISMS 080292 & 080293
885901
PRESSURE SWITCH FOR W75 & 105
885902
PRESSURE SWITCH FOR W125 & 185
907406
960304
SWITCH WITH NO ARM
USED ON 248711 SQUARE DOOR
HANDLE LOCK ASSEMBLY
PUSH SWITCH WITH LIGHT
FOR NON COIN METERS
TIMERS
961005 SWITCH, WHITE
961006 SWITCH, RED
961008 SWITCH, ORANGE
895015
230V.
FOR MODELS W73,
74, 123, 124, 183 & 184
895016
115V.
FOR MODELS W73, 74
DELAY UNITS
CIRCUIT BOARDS
951411
951461
220V.
FOR MODELS W73,
74, 123, 183 & 184
220V.
FOR MODELS W73,
74, 123, 124, 183 & 184
951412
951462
115V.
FOR MODELS W73, 74
115V.
FOR MODELS W73 & 74
FOR 951412 DELAY UNIT
110
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
SOAP LIDS
614502
SOAP LID BAR
FOR ALL MODELS
WITH RUBBER LIDS
240802
RED FABRIC SOFTENER LID
FOR MODELS W73, 123 & 183
007901
BLACK LID, NEW STYLE
613301
BROWN LID
10 PER BOX
613302
BLACK LID
10 PER BOX-50 PER CASE
687463
SOAP LID KIT, BLACK
INCLUDES SOAP LID &
SOAP LID BAR
SOAP BOX GASKETS
007801
922756
FOR ALL GENERATION 3 MODELS
902785
SLOW BLOW FUSE 1.5 AMP
FOR ALL MODELS
FOR ALL GENERATION 5
MODELS, RUBBER, BLACK
455501
FOR MODELS W74, 124 & 184
FOAM RUBBER
STATOR COILS FOR ABOVE
ELECTRIC STATOR
COIL FOR MOTOR
& GEAR #’s 675358,
675364, 970400 & 970401
099945
STATOR/DRAIN 115V.
099944
5 PER BOX
STATOR/DRAIN 220V.
111
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
SOAP BOX STRAPS
615201
615202
FOR WASCOMAT
SPRINGS
780902
SOAP BOX SPRING
780107
FOR DRAIN VALVE
FOR MODELS W75,
125 & 185
780600
780401
RETURN SPRING
FOR PANCAKE
DUMP VALVE
FLAT SQUARE DOOR SPRING
FOR MODELS W73, 74, 123, 124,
183 & 184 USED WITH 248711
SQUARE DOOR HANDLE LOCK
ASSEMBLY & 931501 LATCH
780802
SOAP BOX SPRING
785701
COIL FOR WATER VALVE
SOAP CHUTES
MOUNTING CLIP
240805
FOR W73
669632
243556
115V. FOR W74
FOR W123, W183
669633
220V
666419
SOLENOIDS
DRAIN KIT
FOR GENERATION 4 MODELS
900394
230V.
FOR ALL TYPE II.
EARLY TYPE III JR.
FOR BLUE TOP
MACHINE W71
112
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WASCOMAT
CAPACITORS
START MECHANISMS
080292
N.S. 115V.
952520
080293
20MF MOTOR
N.S. 220V.
952521
50MF 1PH. MOTOR
952522
100MF MOTOR
952524
START MECHANISMS
TIMER MOTORS
40MF 1PH.
952525
130MF 1PH.
952527
080306
30MF 1PH.
115V.
952528
080307
160MF
220V.
SWITCHES FOR START MECHANISMS
080304
NO LEVER
080305
WITH LEVER
990207
FOR W75 OS 2 SEAL
BEARING KITS
990208
FOR W125 NS
990216
FOR W105 NS
CROSS REFERENCE
OLD #
NEW #
990217
FOR W74 & W73
990218
660856
660857
660858
666429
666537
675142
685513
990212
FOR W123 & 124
990219
FOR W125 OS
990220
FOR W183, 4 & 5
990235
FOR W75 NS 3 SEAL
990211
FOR W185 O.S.
113
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
990217
990218
990220
990218
990220
990217
990207
990220
FOR WASCOMAT
241355
TIMER CYCLE DECAL
FOR MODELS W73, 123 & 183
DECALS
765117
YELLOW WARNING DECAL
FOR ALL MODELS
REPLACES 400953
761958
NAME STRIP
FOR MODELS W73 & 74 JUNIOR
W280002
761968
NAME STRIP FOR W124 SENIOR
W280502
761982
NAME STRIP FOR W184 GIANT
W280601
253401
BROWN INSTRUCTION SIGN
FOR PUSH BUTTON MODELS
W73, 123, 183
290101
099873
FOR GEN. 5 SILVER
452501
452532
BROWN INSTRUCTION SIGN
W73, 123, 183 NS. & GENERATION
4 ROTARY SWITCH MODELS.
SILVER INSTRUCTION SIGN
FOR GENERATION 4 ROTARY
SWITCH MODELS
114
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
DIRECT DRIVE PARTS FOR WHIRLPOOL WASHERS
GEAR CASE, DIRECT DRIVE
389245
3360629
NEW
NEW
NEW
REPLACES 385899
ITEMS REPLACES 389244
& 389246
NEUTRAL DRAIN
285753
63753
DIRECT DRIVE MOTOR
COUPLING TRIANGLE N.S.
LINT FILTER
FOR DIRECT DRIVE MODELS
NEW
ITEM
NEW
ITEM
285753-0
NEUTRAL DRAIN
TRIANGLE COUPLING
OEM SPEC.
389248
3363892-0
3363394-0
DRIVE MOTOR FOR DIRECT DRIVE
DIRECT DRIVE
PUMP WITH FLAPPER
PUMP
FOR DIRECT DRIVE MODELS
NEW
ITEM
REPLACES 3348015,
3352492 & 3363394
NEW
ITEM
NEW
ITEM
OEM
SPEC
MFG. BY
EMERSON
OEM
SPEC
2 SPEED
3357901
LID SWITCHES
3952164
VALVE, 3 COILS
NEW
ITEM
VALVE
3935737
3966402
8054980
NEW
ITEM
1 SCREW
HOLE
N.S.
D I R E C T
285746
D R I V E
285748
A G I T A T O R
285206
REPLACES
3363663 & 3351001
C A M
K I T S
AGITATOR DOG KITS,
FOR DIRECT DRIVE
NEW
ITEM
NEW
ITEMS
NEW
ITEMS
285751
3947410
REPLACES
3366877
1 3/4”
HEIGHT
285770
3”
HEIGHT
DOGS, PACKS OF 4
NEW
ITEM
115
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
DIRECT DRIVE PARTS FOR WHIRLPOOL WASHERS
285140
389140
3966789
63907
MOTOR DRIVE COUPLING,
ROUND O.S.
BLOCK, DIRECT DRIVE
PRESSURE SWITCH
SPRING
NEW
ITEM
3349985
356427
285352
8317940
SEAL FOR
DIRECT DRIVE
DIRECT DRIVE SEAL
DIRECT DRIVE SEAL
DRAIN HOSE AND FLANGE ASSEMBLY
NEW
ITEM
NEW
ITEM
NEW
ITEM
63235
388492
85114
285540
AGITATOR FOR DIRECT
DRIVE MODELS
SPRING
TOP LOAD WASHER
FOOT PAD
CLUTCH KIT
FOR DIRECT DRIVE WASHERS
NEW
ITEM
REPLACES 285538, 285759,
285761, 285785, 285790, 388190,
388948 & 388949
REPLACES
360646, 364230,
383951, 383952
& 18402K
NEW
ITEM
285203
BE7572SE
388253
BEARING KIT, DIRECT DRIVE
BLACK RUBBER HOSE
UNIVERSAL DRAIN HOSE WITH STRAIGHT END
NEUTRAL PACK
72”
TOTAL
NEW
ITEM
WILL REPLACE
96743 & DIRECT
DRIVE PVC
HOSE
LID SWITCH & HARNESS KIT
285671
WITH ROUND
TERMINALS
3949247
WITH SPADE
TERMINALS
3949238
WITH SPADE
LATE MODELS
TERMINALS
NEW
8054980
AND BRACKET ITEMS
3
WIRE
6” LEADS
3966402
MADE IN U.S.A.
1”
7/8” 3/4”
8054980
CW151
SWITCH
VALVE
LID LATE MODELS
O.S.
UNIVERSAL
116
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION PURPOSES.
FOR WHIRLPOOL DRYERS
HEATERS & WIRE KIT
279838E
4391960
279838
5200 WATTS
NEW
ITEM
UNIVERSAL
HEATING ELEMENT
FOR DRYERS, PREVIOUS
MODELS REPLACES 279455,
279462, 660982 & 3388653
COMPLETE HEATER
WITH HOUSING. FOR
LATE MODEL DRYERS.
5200W
NEW
ITEM
HEATER, LESS
HOUSING. FOR LATE
MODEL DRYERS
5400W
5400W
3387747
279247
279598
HEATING ELEMENT
REPLACES 279218,
339655 & 337378
NEW
ITEM
REPLACES 279248,
279698, 337430 & 340468
5200W
5600W
279139
WIRE SET FOR
279247
REPLACES 279457
DRYER MOTORS
279787
279827
N.S. DRYER MOTOR
DRYER MOTORS
NEW
ITEM
279811
FOR STACK DRYERS
NEW
ITEM
MFG. BY EMERSON
NEW
ITEM
MFG. BY EMERSON
117
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WHIRLPOOL DRYERS
LINT FILTERS
348855
348851
3389510
339392
REPLACES 338405,
341030 & 690634
O.S. DRYERS
O.S. DRYERS
NEW
ITEM
297092
691366
TRI RING RETAINER
METAL CLIP
2 PER PACK
IDLER ASSEMBLY
FOR 349241 ROLLER
339491
690997
NEW
ITEM
REPLACES 688166
3391902
339489
339490
SWITCH, N.S. DOOR
ROLLER SHAFT
ROLLER SHAFT
NEW
ITEM
REPLACES 3391901
USED WITH
349241 ROLLER
DRUM MULTI V BELTS
237555
237683
337019
337388
341241
345675
349533
356402
356403
660996
661570
693306
694088
694416
694868
695055
697388
3276623
3387610
3389728
3394652
3399844
118
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WHIRLPOOL DRYERS
FOR K VALVES
SECONDARY COIL
279059
348376
COILS & COIL KITS FOR GAS DRYERS
FOR K VALVES
279137
EXACT COIL KIT
342885
UNIVERSAL COIL KIT
349748
UNIVERSAL COIL KIT
HOLDING COIL
279058
348375
BOOSTING COIL
279060
348374
FOR M VALVES
694540
SCA700
KIT
694539
DUAL COIL
SINGLE COIL
3390734
DRYER DOOR GASKET FOR OLD & NEW
MODELS REPLACES 685763
3406105
688166LB
SWITCH
IDLER
PULLEY & SHAFT
NEW
ITEM
LATE DRYER DOOR SWITCH
DRYER DOOR HINGES
686711
DRYER DOOR HANDLE
691193
691194
RIGHT HAND
LEFT HAND
NEW
ITEM
NEW
ITEM
NEW
ITEM
FOR DROP DOWN DOOR MODELS
119
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
FOR WHIRLPOOL DRYERS
DOOR CATCHES
279280
236877
CATCH ONLY,
10 PER PACK
REPLACES 3398441
IGNITORS & IGNITOR KITS
CATCH & STRIKE
KIT
INDIVIDUALLY
686590
FLAT IGNITOR
DRYER APPLICATION
236876
STRIKE ONLY,
10 PER PACK
CATCH
REPLACES
347813
STRIKE
279311
FLAT IGNITOR KIT, DRYER APPLICATION
338900
FLAT IGNITOR KIT, DRYER APPLICATION
279638
230131
DOOR CABLE
PLASTIC CLIP
FOR DRYER
LOWER PANEL
239300
ROUND IGNITOR
DRYER APPLICATION
NEW
ITEM
PACKED 12 PER BOX
PILOT UNLATCHES O.S. DRYER
339639
298750
11” CAPILLARY
11 1/2” CAPILLARY
144 PER CASE
LATE DRYER THERMOSTATS
279054
LD290
3387134
3THERM.
REPLACES
3387135,
3387139
& LD155
279048
REPLACES
3388697
L205-40
3390291
L250-80
O.S. GAS DRYERS
120
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEMS
FOR WHIRLPOOL DRYERS
688865
WIDE DRUM ROLLER KIT
K1648
DRYER TIMER KNOB
LINE CORD, 8 FT, 115V
349241-0
1 PER BAG
NEW
ITEM
REPLACES
3389901,
3389902, 340352,
349241, 3396802
& 661562
6/3
337186
341241T
SPRING FOR
DRYER DOOR
ROLLER KIT, 2 PER BAG
NEW
ITEM
NEW
ITEM
DRYER DRUM SEALS
239087
WHITE & GREEN, 83”
279408
RED & GREEN, 78”
279264
279735
RED & GREEN, 73”
695499
FUSES
DRYER FAN, REPLACES 694089 & 279711
3390719
DRYER FUSE
REPLACES
279650,
688841 & 690198
279769
279347
NEW
ITEM
FUSE KIT
SWITCH
REPLACES
3398671
3977394
121
PART NUMBERS AND ILLUSTRATIONS INTENDED SOLELY FOR IDENTIFICATION
NEW
ITEM
3392519
THERMAL FUSE
REPLACES 694511
NEW
ITEM

Similar documents

Industrial Inc. - Jason Industrial

Industrial Inc. - Jason Industrial Alliance, Amana, SQ Alliance, Amana, SQ Alliance, Amana, SQ Alliance, Amana, SQ Alliance, Amana, SQ Alliance, Amana, SQ Alliance, Amana, SQ Alliance, SQ, Unimac Alliance, SQ, Unimac Alliance, SQ, U...

More information

Samuel T. Hemsley

Samuel T. Hemsley Salisbury, MD Denise Whittington Harden 443-235-0157 Attorney at Law Asphalt Maintenance & 122 E. Main Street Repair Salisbury, MD 21801 410- Robert M. McGriff, Prop.

More information

petitions by address

petitions by address Bemis Rd – 11 Benton St – 11 Benton St – 15 Benvenue St Benvenue St – Lot A Benvenue St – 1 Benvenue St – 6 Benvenue St – 14 Benvenue St – 26 Benvenue St – 29 Benvenue St – 30 Benvenue St – 78 Benv...

More information