MVM AVM - Techsouth Inc

The perfect addition
for the RA- and GF
pipe cutters made by
Orbitalum Tools:
www.orbitalum.com
AVM
Pipe Cutting and Beveling Machines with
Automatic Feed Module AVM
l
Preparing pipes at the touch of a button
AVM
„The intelligent solution
for a precise and
automatic pipe cutting
process„
This intelligent solution continuously controls the
cutting speed depending on the torque and the parameter settings. The automatic pipe cutting module
AVM improves the handling of the GF- and RA machine
and stops automatically after the cutting process. The
restart inhibit does not allow an unintended start-up.
MVM
Pipe Cutting and Beveling Machines with
Manual Feed Module MVM
l
Preparing pipes manually
MVM
„Cutting pipes easily
with the help of a hand
wheel„
This manually operated feed module facilitates the
cutting and beveling of pipes. Via a hand wheel, the
machine head is rotated around the pipe easily and
with little effort.
Your benefits by using the feed modules AVM/MVM:
•
•
•
•
•
Increased productivity
Improved cutting quality
Increased service life of tools
Reduced operator impact
Follows all EN and safety requirements
Both feed modules AVM/MVM are available with the following
Pipe Cutting and Beveling Machines made by
Orbitalum Tools:
RA 6 MVM
RA 6 AVM
RA 8 MVM
RA 8 AVM
RA 12 MVM
RA 12 AVM
GF 20 AVM*
GF 4 MVM
* GF 20 only available with AVM.
precision.
power.
simplicity.
GF 4 AVM
A wide range of saw blades and
High performance lubricants for
Aluminum clamping shells
bevel cutters are available,
pipe cutting and bevelling, to inFor GF 4, GF 20, RA 41 Plus, RA 6,
designed to maximise the quality crease the life of the saw blades.
RA 8, and RA 12. For deformationof cut and provide the longest
GF TOP, Tube, 180 g:
free clamping of thin-walled tubes.
service life possible.
Code 790 060 228.
A wide range of INOX-, aluminum- and
ROCOL, Tube, 150 ml:
Tempered cast steel clamping jaws
Code 790 041 016.
for preparation of stainless steel and
aluminum tubes and pipes.
Very sturdy and stable pipe
feeder: feeds accurately long
and heavy pipes into GF- and
RA machines.
Base unit:
Code 790 068 051
Extension unit:
Code 790 068 061
Cutting high-alloy steel (stainless steel), lowand unalloyed steel, casting materials and nonferrous metals in just seconds, using the patentregistered “Planetary Cutting” method – with the
RA and GF Pipe saws made by Orbitalum Tools!“
The AVM/MVM is only available as a factory fitted option, it is not
available as a retrofit option.
The automatic and manual feed module AVM/MVM is already fitted
to the pipe cutter upon delivery.
Automatic/Manual Feed Modules AVM/MVM
Application range AVM/MVM with
GF 4
GF 20*
RA 6
RA 8
RA 12
Pipe OD [mm]
Pipe OD [inch]
12 - 120
0.472 - 4.724
283 - 508
11.14 - 20
44** - 182
1.732** - 7.165
114 - 230
4.488 - 9.055
154 - 325
6.063 - 12.795
Wall thickness, depends on material [mm]
Wall thickness, depends on material [inch]
1-9
0.039 - 0.354
max. 15
max. 0.59
2 - 10
0.079 - 0.394
2 - 10
0.079 - 0.394
2 - 10
0.079 - 0.394
Pipe ID min. (saw blade Ø 63 mm/2.480") [mm] 21
Pipe ID min. (saw blade Ø 63 mm/2.480") [inch] 0.827
–
–
76
2.992
137
5.394
185
7.283
Pipe ID min. (saw blade Ø 68 mm/2.677") [mm] 16
Pipe ID min. (saw blade Ø 68 mm/2.677") [inch] 0.630
–
–
71
2.795
132
5.197
176
6.929
Pipe ID min. (saw blade Ø 80 mm/3.150") [mm] 4
Pipe ID min. (saw blade Ø 80 mm/3.150") [inch] 0.157
295
11.6
59
2.329
120
4.724
164
6.457
Pipe ID min. (saw blade Ø 100 mm/3.937") [mm] –
Pipe ID min. (saw blade Ø 100 mm/3.937") [inch] –
275
10.8
39
1.535
101
3.976
144
5.669
Cutting speed [rpm]
65 - 215
50 - 163
150 - 270
150 - 270
150 - 270
Technical data
AVM
MVM
Weight
10.2 kg
22.5 lbs
3.5 kg
7.7 lbs
Power
50 W
–
Versions AVM
Stamp of distributor:
200 - 240 V, 50/60 Hz or 100 - 120 V, 50/60 Hz
* GF 20 only available with AVM.
** Special clamping jaws must be installed for pipes with an outer diameter (OD)
of < 85 mm (3.346 inch). These are already delivered with the RA 6 (H).
The technical data are not binding. They are not warranted characteristics and are subject to change. Please consult our general conditions of supply.
© Orbitalum Tools GmbH | An IT W Company | 11.2008
Josef-Schüttler-Straße 17, 78224 Singen, Germany,
Phone +49 (0) 77 31 792-0, Fax +49 (0) 77 31 792-524
www.orbitalum.com, tools@orbitalum.com
AVM_MVM__EN_00__digit
Info-Hotline: +49 (0) 77 31 792-787 up to 789