Setting up your iQ3

Satellite Version
Setting up your iQ3
Here’s how to set up your iQ3 to access the world of Foxtel entertainment.
1 First up, let’s check you’ve got all the goods
2x
2x2x
2x
2x
iQ3 box
iQ3 remote
and batteries
TV aerial cable
and adapter
Foxtel cables
HDMI cable
Ethernet lead
Power lead
with power pack
(new customers only)
2 Connect your iQ3 to your TV
B
13V/18VDC
350A max
Combined
Input 1
Digital Audio Out
Input 2
TV aerial
E
12V DC
5A max
Optical
on’t be a maverick – make sure your TV (and existing Foxtel box if you have one)
D
is turned off at the wall.
D
C
Coaxial
HDMI
USB
5V DC 500mA
Ethernet
A
USB
ETHERNET
HDMI
SPDIF
and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories. “Dolby”
VIDEO
Y
RF IN
LNB-IN1
RF OUT
LNB-IN2
Satellite
And remember:
Pb
RS-232
Australia Pty Ltd
THOMSON
Telecom
If you’re upgrading your box, use your existing Foxtel, HDMI and Ethernet cables
where possible.
You will see a black screen for a couple of minutes and then just follow the prompts.
Pr
U.S. patent Nos 4,631,603 ; 4,577, 216
and 4,819,098 licensed for limited
pay per view uses only
Terrestrial
RS-232
CSO6460V
LNB-IN1
LNB-IN1
RS-232
To TV
RF IN
Satellite
Pb
Australia Pty Ltd
ETHERNETTelecom
S-VIDEO
VIDEO
Pb
Y
Y
THOMSON
Terrestrial
pay per view uses only
and 4,819,098 licensed for limited
U.S. patent Nos 4,631,603 ; 4,577, 216
Telecom
THOMSON
SPDIF
USB
and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories. “Dolby”
To internet
access
point
(optional)
USB
VIDEO
LNB-IN2
LNB-IN2
RF OUT
DDP060AUS / T500
To Foxtel
wall plate
SPDIF
Australia Pty Ltd
Satellite
RF IN
N10406
TV
Pr
S-VIDEO
ETHERNETTelecom
THOMSON
RF OUT
CSO6460V
To TV aerial
wall plate
TV
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
DDP060AUS / T500
N10406
Once you’re connected, turn your TV back on and select the HDMI source you’ve
connected to.
S-VIDEO
Terrestrial
(optional)
Terrestrial
Pr
To power
point
TV
TV
Pr
3 Bluetooth pairing your iQ3 remote
First things first, insert the batteries provided and wait for the standby button on your iQ3 to turn blue, then you’re right to pair.
Press any button
on your remote
until the blue light
starts to flash.
Bring your remote
to the front of the
iQ3 until the front
of the box lights up.
4 The iQ3 will light up when it
connects with your remote.
Once the lights on the iQ3 and
remote stop flashing, you’re set.
Call 1300 732 681 to activate your iQ3.
5 Connecting your iQ3 to the internet
To get the most out of your iQ3 features, connect your Ethernet lead from your internet access point to the back of the iQ3, or connect to WiFi by following
these steps:
Select Home on your iQ3
remote, then arrow right
and select Settings.
Select Internet Connection.
Select WiFi.
Select your network.
Enter your WiFi password,
select Done and you will be
advised once connected.
6 Tune those channels
To receive your free-to-air channels* off your TV aerial, check you’ve connected your iQ3 to your aerial wall plate, then:
Select Home, arrow right
and select Settings.
Select Terrestrial
Channels from Settings.
Select Full Scan.
Select Begin Scan.
Once scan is complete
select View TV Guide.
FX03826 0315 SAT
Need a helping hand?
FX03826 0315 SAT.indd 1
For iQ3 tips and tricks, check out your welcome book enclosed or the Help
videos in Channel Picks (in your Home menu). For troubleshooting or support,
go to the Help section in your iQ3 Settings or visit foxtel.com.au/support
*Free-to-air channels will vary based on location. Not all channels are available in all areas.
10/03/15 10:08 AM