RODDOORS NEW CATALOG 2008 8 1.indd

Transcription

Great Interiors don’t grow on trees....
Farm fresh products for over 15 years
N o w Y o u C a n D o Y o u r O w n C u s t o m Rod
INDEX
“Interior
before
First Things
First Paint” 1-2
Headliners
means choosing your 3-4
Studebaker
Interiors
fabric, andTruck
deciding
on 4
Armrests
5-6
what Pulls
your final “look” is 6
Door
going to be. Remember 7
Seatbelts
Carpet
8-10
that if you want to match
FabricsUltra
the paint
toLeather
the interior, 11
Fabrics- Ultra Suede
there may be 80 colors of12
Seats- Bucket
13
fabric
and
7
million
colors
Seats- Bench
14 -15
of paint. The chance
Consoles
16
Mustangs-`64.5-`68
16
of that wild paint color
Chrysler
Airflaow
Dooris
Panels
matching
fabric
very 16
Universal Door Panels 17-18
small. That’s why you see
Ford Coupes `30-`34 19-20
so many
black,
tan, 21
Ford
Truck gray,
Interiors
`48-`53
and white
interiors!`56 22
Ford
Truck Interiors
Ford Truck Interiors `57-`79 23
Ford Truckbefore
InteriorsPaint”
`48-`53 21
“Interior
Chevy
Truck
Interiors
`47-`55 24
means having a checklist
ChevyTruck Interiors`55-`66 25
(see page 3).
ChevyTruck Interiors`67-`72 26
ChevySuburban/Blazer`67`72 26
“Interior
before
Paint”
ChevyTruck
Interiors
`73-`87 26
means
trimming
the panels
Chevy
Sedans
&Wagons
27-28
CamaroFirst them
Gen through
29-30
and getting
Underdash/Dash
all those “ins and outs” of31
Cup Holders
32-33
fitting to the vehicle.
Deck Lid Liners
33
RodFoam
34
Now you're ready to paint
Pedals
35
and you've
lessened the 35
Steering
Wheels
chance of scratching a 36
Weatherstripping
Wiring
new high-buck paint job.3 6
Speaker
Pods
7
Plus if you
need to weld 3on
To
Reach
Us:brackets, now
any
special
is the
time. After paint it's
Call
800-428-7114
too late.
email: sales@roddoors.com
It’s a process.
©2008 RODDOORS, INC.
ALL RIGHTS RESERVED
INTRODUCING THE RODDOORS WAY
PLANNING AND DESIGN
A good finished interior doesn’t
The RodDoors Way means that
happen by accident. It happens
before you consider how you’re
because someone took the time
going to do your interior, you
to plan and design the interior and
need to first consider what you
pretty well had it all figured out be-
want it to look like. What do you
fore lifting a finger to do the work.
want the design to be — plain or
In the past we’ve featured a `32
detailed? What colors would you
Ford Coupe. It was a great example
like to use — subdued or bright?
of a well-planned and designed
What textures would be good —
owner-built interior. You can achieve
smooth like leather, rougher like
equal results if you just follow The
a woven fabric? Look over the
RodDoors Way.
many examples in this catalog.
See what many others have done.
Then put your imagination to
work and let your creative genius
come out. Work with our designs
or create you own. Either way, the
RodDoors Way will make it possible. So let’s get started!
HOW TO SIZE THE UNIVERSAL PANELS
The outside dimensions of all
You choose the design width
universal panels are 44” wide x
that allows you to trim the
32” high. The design may bleed
overall panel to size without
off one or more sides and can be
cutting into the design. The
trimmed without harming the
difference between the design
design. Or, as shown in the chart
width and 44” is the space that
on the right, designs may be 23”,
your trim width must fall within
30” or 36” wide.
to preserve the design.
1
Interior – H e r e ’ s W h a t Y o u N e e d T o K n o w T o G e t S t a r t e d
THE BASICS
THE PANELS
HOW IT WORKS
TWO TYPES
All panels are made of durable,
You cover the door panels,
There are two types of panels:
.125 thick ABS plastic. They can be
kick panels, quarter panels,
UNIVERSAL and PRETRIMMED,
glued, screwed, foamed, carved, or
headliners, rear cab covers and
MODEL-SPECIFIC. The Universal
layered — and they are waterproof.
trunk lid panels with fabrics:
ABS glue is used to patch or fill
leather, Ultraleather, Ultrasuede.
them to fit your door. The
mistakes, do custom treatments or
Or any one of many woven
pretrimmed, model specific
to add material where it is needed.
materials.
panels come to you ready to
3MTM
No sewing is required.
cover and install. You may have
Dual Lock
The fabric is glued down using
TM
Reclosable
spray adhesive specific to this
Tabs are used
application. All panel designs
to fasten the
allow the covering materials to
panels, eliminating
flow neatly into the design.
screws, clips or holes
TM
Panels require that you trim
®
to do a little final nip and tuck,
but that’s it.
PRETRIMMED,
MODEL SPECIFIC
UNIVERSAL
to drill. The Dual Lock TM tabs system
also allows you to remove and
reinstall the panels easily.
These panels are made to fit a specific
model car or truck with no trimming.
These panels must be trimmed to fit
As shown below.
Trim to Fit
Door panels come in sets of two,
There are several panel styles
a right and a left, with the design
that can be used as double sets
centered in each panel.
for a 4-door car, or as the rear
Trim to Fit
Healey Flow-Thru Design
Quarter Panels on a 2-door car.
The second set can be reversed
so that the design flows through
23"
30"
36"
from the front door to the rear
door.
|----------------- Panel 1-------------|-----------------Panel 2--------------------|
2
WWW.RODDOORS.COM – VISIT US TODAY! • 800-428-7114
Products are shown with fabric for display purposes only.
HEADLINERS
Model A,`32,`33-`34 FORD
COUPES AND SEDANS
One piece design w/quarter panels,
molded in ABS plastic, smooth, no
design (insulation included).
RD3702 Pretrimmed for New Age
`32 5 window Coupe
$379
RD3710 Untrimmed for
`32 3 or 5 window Coupes $379
RD3712 Untrimmed `30-`34 Headliner
Coupes
$379
Coupes w/ Wiper Extention $425
Model A/ Victoria Sedans
$479
Model A/ Victoria Sedans w/
Wiper Extention
$525
`53-`56 FORD TRUCK HEADLINERS
`28-`34 FORD TRUCKS
Headliner, quarter panels and rear cab
cover, with or without radio mounts.
Molded in ABS plastic, smooth, no design
(insulation included).
RD3541 Late `28-`29, with
Rear panels
$379
RD3551 Late `31- early `34, w/radio
Mount, rear panels
$379
RD3556 `34, with radio mount
$379
RD3550 Late `31- early `34, w/o radio
Mount, rear panels
$379
RD3557 `34, without radio mount $379
language that has almost become
a restoration tradition with the old
F-100 headliners.
Save time, save money, and don’t
worry if your grand kids are within ear
shot, because you won’t be cussing,
you’ll be smiling from ear to ear having
done it all by yourself.
1956 Ford Big Window
Truck Headliner
The 1953-`56 Ford Trucks originally
came with a cardboard headliner
held in place with a rubber headliner-to-roof seal. To say that it was ugly
is an understatement. If you had the
truck painted in any light color and
were using a light colored headliner
material you were gifted with a big
black rubber strip from the back of
the door up and around and over the
windshield – pure ugly.
`39 COAST TO COAST
The RodDoors Rubberless version
for the `53-`56 F-100 has the fabric
fitting into the pinch weld and butting up to the painted part of the cab
interior. Lighter color paint and fabric no longer have a BIG UGLY BLACK
SEAL holding them apart.
`35-`52 FORD TRUCKS
COAST TO COAST `39 ROADSTER
Pretrimmed to fit the removable hardtop.
Molded in ABS plastic, smooth, no design
(insulation included)
We have headliners and other parts for
Ford Trucks. Each ships with a Heat Shield
Aluminum Pad. Each headliner is molded in
One piece of ABS plastic and is ready to be
covered in the fabric of your choice.
RD3552 `35-`36 with qtr panels
RD3553 `37 w/qtr panels
RD3554 `38-`39 w/qtr panels
RD3070 `38-`39 Door Panels
This is a truly top notch application
available out of the box and ready
for you to add fabric and install. We
even include some of our 3/8” Aluminum back insulation pad with every
headliner.
$199
$199
$199
$89
$199
$199
The best part of all is that the
“Rubberless” version installs in
10 minutes, without all the
sweat, skinned knuckles, and foul
RD3750 `39 C to C Headliner
$650
RD3804 Deck Lid Insert (on pg 33) $179
Another fine example of what a little imagination can
do. The owner of this sweet `33 used our “Pulver” panels
with armrests for the doors and a matching panel set for
the headliner glued together and covered. Twisty purple
velour inserts on both the doors and the seats, with matching purple Daytona Weave Carpet.
3
Three piece unit with matching
design. Includes rubber head-toroof seal where required.
RD3208 `53-`55 Orig. Style,
W/design & seal
$229
RD3210 `53-`55 smooth, w/seal $229
RD3209 `53-`55 Rubberless,
Smooth (ORDER THIS ONE) $199
RD3266 `56 Orig., big window
W/design & seal
$229
RD3267 `56 Orig., big window
Smooth, w/seal
$229
RD3268 `56 Rubberless, Big window
smooth (ORDER THIS ONE) $199
RD3269 `56 Orig., Small window
w/design & seal
$229
RD3270 `56 Orig., Small window
Smooth, w/seal
$229
RD3271 `56 Rubberless, Small window
`57-`79 FORD TRUCKS
Each ships with a Heat Shield Aluminum
Pad. Each headliner is molded in One piece
of ABS plastic and is ready to be covered in
the fabric of your choice.
RD3004 `57-`60 Sm window
RD3003 `57-`60 Big window
RD3126 `61-`64 sm window,
Unibody
RD3125 `61-`64 big window,
Unibody
RD3127 `61-`64 standard cab
RD3128 `65-`66 standard cab
RD3185 `67-`72 Smooth
RD3153 `73-`79 Smooth
$199
$199
$199
$199
$199
$199
$199
$199
HEADLINER ‘N MORE PARTS
`36-`87 CHEVROLET TRUCK HEADLINERS
We have headliners for Chevy Trucks.
Each ships with a “Quality Heat
Shield” Aluminum Pad. Each headliner is molded in One Piece of ABS
plastic and is ready to be covered in
the fabric of your choice.
RD3450H `34-5-6 High Roof,
3-Hinge door, smooth
$189
RD3450L `36 Low Roof,
2-Hinge door, smooth
$189
RD3451 `37-`38, smooth
$189
RD3454 `37-`38 Kick Panels (NEW) $69
RD3452 `39-`46, smooth
$189
RD3455 `39-`46, Kick Panels (NEW) $69
RD3085 `47-`48 split window
Smooth
$189
Quinn Design
$189
Smooth
$189
RD3089 `49-`53 window - Quinn $189
RD3087 `53-`55 first series,
Round window, smooth
$189
STUDEBAKER TRUCK
INTERIOR PARTS
1960-1966
RD3144 Kato/Fenniman design
$189
RD3166 `55-`59 Smooth
RD3165 `55-`59 Kobi design
Shown above
$189
$189
One piece design w/quarter
panels, molded in ABS plastic,
smooth, no design (insulation
included).
$189
1973-1987
RD3062 Smooth, replacement
style headliner
$189
Not shown, requires original plastic trim
CHEVROLET SUBURBAN
“M” Cab `41-`48
RD3613 Flat door panels
RD3612 Kick panels, smooth
RD3611 Rear cab cover
RD3610 Headliner
RD3614 Glove box
RD3616 Fire wall insulator,
1/2 ton ONLY
$159
$79
$229
$249
$89
$199
“C” Cab`49-`64
OVERSIZED FOR CUSTOM
APPLICATIONS
RD3094 `47-`53 split win - W/clips,
Smooth
$189
Quinn Design
$189
RD3096 `53-`55 first series rnd win
W/clips, Smooth
$189
RD3097 `53-`55 first series rnd win
w/Deco cutouts And inserts $259
1955-1959
For a more traditional look we also
offer an original style sewn headliner
system for over 5000 cars, sewn out
of either original type fabrics, your
fabric or any of the many fabrics we
sell. At $200 plus the cost of fabric,
this is a rare bargain.
1967-1972
RD3044 Dano design
Check out this Big Boy! We now have
a five-piece replacement Headliner
for your `67-`72 Suburban.
RD3041 `67-`72 Dano Door Panel
W/ Hungarian Armrest $199/pr
RD3042 `67-`72 Kick Panels,
$69/pr
RD3049 `67-`72 Suburban
Headliner
$650
RD3051 `67-`72 Rear Door/ Interior
Panel
$249/pr
RD3050 `67-`72 Suburban Quarter
Panels
$279/pr
RD3048 Pillar Covers, No tweet $39/pr
RD3047 Pillar Covers, W/tweeter $79/pr
ORIGINAL BOW-STYLE
HEADLINERS
FOR SEDANS, COUPES
AND WAGONS
RD3600 `49-`53 Headliner, split
small rear window
$249
RD3601 `54 Headliner, split windshield,
large rear window
$249
RD3602 `55-`64 Headliner,
round windshield,
large rear window
$249
RD3618 Door panels, flat
$159
RD3603 Kick panels
$79
RD3605 `49-`53 rear cab cover
$229
RD3606 `54-`64 rear cab cover - without
tank, must be adapted for gas
filler tube if retaining original
tank location
$229
RD3615 `49-`63 1/2-ton firewall
insulator
$199
PRICES AND PRODUCT FEATURES SUBJECT TO CHANGE WITHOUT NOTICE
Color Combo hhc
CARPET: Cut Pile, Hugger Orange
SEAT: Ultraleather,® Hot Sauce
INSERT: Ultraleather,® Chamois
Two-toned “Youngster” panel. In this picture
you can see how the seats were sewn to match
the door panels.
4
RD2700 Bow-Style Headliner
$200
RD2710 Bows, replacements for missing
original Bows, these are universal
Trim-to-fit
$18 ea
SUNVISORS
Matching visors are provided with
1/2 yard of fabric of your choice.
STITCHED WITH
DOUBLE BINDING
RD2720 Set with fabric
$200/set
DODGE TRUCKS
Same great one piece design
w/quarter panels, molded in ABS
plastic, smooth, no design (insulation included). Available fall of
`08.
RD3910 `46-`68 Dodge Power Wagon3 Window Headliner,
Smooth
$249
RD3911 `46-`68 Dodge Power Wagon5 Window Headliner,
Smooth
$249
RD4500 Trim- to-Fit Kick Panels-Flat $69
RD4501 Trim-To-Fit Door Panels-Flat $89
RD2600 Universal Rear cab cover $199
ARMRESTS & DOOR PULLS
Modular Armrests can be used with any type of door paneling (cardboard or plywood door skins). Each armrest has an integral
mounting flange. Simply cut a hole in the panel the shape of the armrest, use glue or pop rivets to attach the flange. Armrest
can be upholstered separately or after installation on door panel. Install finished door panel as required. Modular Armrests are
hollow to accommodate our exclusive Door Pull Kit and or our neat Billet Hidden Door Release Lever.
The Hungarian
RD1505 16-1/2" length
The Thai
The Pimento
$49/pr
RD1508 18" length
RD1511 15" length
$49/pr
The Habanero
$49/pr
RD1504 16-1/2" length
$49/pr
RD1507 13" length
$49/pr
RD1501 18" length
$49/pr
RD1517 11-1/2" length
$49/pr
Our Best Seller two years running!
The Yolo
The Anaheim
RD1500 16" length
$49/pr
RD1512 19" length
$49/pr
RD1502 19" length
RD1506 13-1/2" length
$49/pr
RD1509 16-1/2" length
The Cayenne
The Serrano
RD1510 16-1/2" length
The Jalapeno
$49/pr
The Fresno
The Paprika
RD1516 11" length
$49/pr
The smallest one we offer,
Great for door pulls
S
HOW TO INSTALL MODULAR ARMRESTS
There are three quick and easy steps to getting good
looking, inexpensive and lightweight armrests on your
doors. Each armrest comes with a 3/4” flange. The flange
allows you to attach the armrest to the door panel with
screws or by gluing.
The Tobasco
RD1513 16" length
window to the top of the armrest is 9-12 inches. Use this as a
starting point and then adjust the position to suit yourself.
Step Two:
Install the door pull into the armrest. The pull attaches to the
door with a metal bracket so that at no time are you pulling
on the armrest or the door panel to close the door.
HINT: Our armrests are hollow so they will accommodate
installing switches for power windows.
Step One:
Step three:
This most important step is to locate the armrest on the
door in the best position for you. This can be determined
either by approximating the final seat height with a milk
crate and a few telephone books or by having the seat in
the car. As a general rule, the height from the bottom of the
Trim the door panel to shape, install it temporarily on the
door and mark the panel for your armrest. Pay attention that
the armrest does not interfere with the design on the door
panel. Draw an outline of the armrest on the panel with a
5
$49/pr
The Banana
The Santa Fe
RD1503 19-1/2" length
$49/pr
Includes armrest cap, can be covered
separately with a contrasting fabric.
TIP
The Peron
$49/pr
The Chipotle
$49/pr
marker by tracing around the flange portion of the armrest.
Then draw a parallel line 1/2” inside the outline. Then score
the inner line with a utility knife, break out the plastic from
the panel and test for fit by inserting the armrest through
the hole from the back of the panel.
HINT: The hole you make should be a little tight to the
armrest, so carefully carve out the hole until the armrest
fits with one of two recommend gap dimensions — 1/4”
or 1/8”. Make it 1/4” if you are going to glue the armrest
into the door panel and then cover it integrally with the
door panel.
Make the gap 1/8” if you’re going to cover the armrest
separately from the door panel. Be sure to glue the fabric
down over the flange portion, too. If you need more space
to clear your fabric, carve out the hole a little more.
ARMRESTS & DOOR PULLS
SEDAN STYLE ARMRESTS
DOOR PULLS
Designed specifically for GM cars, but will fit other applications!
Each model is oversized to fit the various trim sizes.
1938-48
1935-36 & 1937-40
RD1550 35-36 W/orig. Ashtray step
Location
$89/pr
RD1551 35-36 W/o ashtray step $89/pr
RD1556 37-40 W/o ashtray step
Location
$89/pr
RD1554 W/orig. Ashtray step
Location
RD1553 W/o ashtray step
1937
Available in polished aluminum,
this beautifully made pull handle is
available 10" and 6” long. Mounting
plates included.
$89/pr
$89/pr
RD5000 10” Handle & mounting
Plate
$189/pr
RD5001 6” Handle & mounting
Plate
$169/pr
1935-40 4-Door Rear
Fits any door panel with armrests. Two
styles to choose from, both include pulls,
screws and brackets for two doors.
RD1010 Small,
(4” x 1.25” x .562” dp)
$25/kit
RD1002 Large,
(5.25” x 1.937” x .812” dp) $25/kit
BILLET DOOR PULL
CRESCENT DOOR PULL
From Lokar, these beautifully made recessed pulls mount in the arm rest and
are fastened with two included stainless
steel screws . Each design is available in
a brushed or polished finish.
RD1552
$89/pr
RD1555
$89/pr
BILLET HIDDEN DOOR RELEASE LEVER
Fits any door panel. Mounts through
panel and fastens from behind. Exposed
dimensions is 6” wide x 1-1/2” deep x
1” high. Mounting kit included. Sold
in pairs
Clean, well designed door release lever kit.
Can be installed in any of our Armrests.
LOK-2005 Pull, polished
LOK-2004 Pull, brushed
$130/pr
$130/pr
LOK-2003 Crescent, polished
LOK-2002 Crescent, brushed
$130/pr
$130/pr
RD1015 Small,
(6” x 1.25” x .562” dp)
$49/pr
NEED A DOOR PULL BUT NOT AN ARMREST? We mold a Billet Pull Support for
the Crescent Billet pulls- shown right.
RD5002 Billet hidden door
Release lever
RD1016 ABS Crescent with Cut Out For
Billet (6” x 1.25” x .562” dp)
$49/pr
$189
RD5002 Billet hidden door
Release lever
$189
Shown mounted in Fresno Armrest
When covering the armrest in RodFoam we recommend that you should have NO GAP with the RodFoam
over the armrest and before covering the armrest. This
will provide a clean Sharpe detail once the armrest is
inserted into the panel. Then use our carpet clips to
attach the armrest from the back of the panel; or, for a
more secure method -- screw the armrest directly to the
door, slip the armrest through the hole in the panel and
attach the door panel as normally directed.
That’s all there is to it!
CHOOSING THE CORRECT SEDAN STYLE
ARMREST MODEL
Use the model years as a guide only. We offer only
some of the many variation offer by GM in the 30’s
thru the late 40’s
Color Combo dbbs
CARPET: Daytona Weave, Dark Blue
SEAT: Ultrasuede,® Blueberry
INSERT: Ultraleather,® Sand
Most were a twist on these models.
An example of this is the 1939 Cadillac. The ‘38-’48 Sedan Style Armrest best resembled what was originally in
the rear, only the armrest extended into the door area, requiring the armrest to have a back and no flange in that
open door area. Again, this is easily adapted by gluing
scrap plastic onto the part of the armrest that extends
into the doorway with ABS pipe cement, and cutting off
the unnecessary flange with a utility knife.
6
Also visit us online
uckle
-StyleleB
N
O
T
T
U
.
b
PUSH BNow Availoaf the description
e end
a
Look for
SEAT BELTS
“G” at th
D.O.T. Tested Certified
and Approved!
• 2-Point Non-Retractable
• 2-Point Retractable
• 3-Point Non-Retractable
• 3-Point Retractable
Note: 1 set of belts is for 1 passenger.
NR = Non-Retractable
R = Retractable
Price includes Mounting Hardware.
BEA-2P B
BEA-2PR B
BEA-3P B
BEA-3PR B
BEA-G2P B
BEA-G2PR B
BEA-G3PR B
BEA-2P FR
BEA-2PR FR
BEA-3P FR
BEA-3PR FR
BEA-G2P FR
BEA-G2PR FR
BEA-2P R
BEA-2PR R
BEA-3P R
BEA-3PR R
BEA-G2P R
BEA-G2PR R
Black, 2-pt, NR
Black, 2-pt, R*
Black, 3-pt NR
Black, 3-pt R
Black, 2-pt, NRG
Black, 2-pt RG*
Black, 3-pt RG
Flame red, 2-pt, NR
Flame red, 2-pt, R
Flame red, 3-pt, NR
Flame red, 3-pt, R
Flame red, 2-pt NRG
Flame red, 2-pt RG
Red, 2-pt, NR
Red, 2-pt, R*
Red, 3-pt NR
Red, 3-pt R
Red, 2-pt NRG
Red, 3-pt RG*
BEA-2P M
Maroon, 2-pt, NR
BEA-2PR M
Maroon, 2-pt, R*
BEA-3P M
Maroon, 3-pt NR
BEA-3PR M
Maroon, 3-pt R
BEA-G2P M Maroon, 2-pt NRG
BEA-G2PR M Maroon, 2-pt RG*
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
$130/set
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P RW
BEA-2PR RW
BEA-3P RW
BEA-3PR RW
BEA-G2P RW
BEA-G2PR RW
Red Wine, 2-pt, NR
Red Wine, 2-pt, R
Red Wine, 3-pt NR
Red Wine, 3-pt R
Red Wine, 2-pt NRG
Red Wine, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P T
BEA-2PR T
BEA-3P T
BEA-3PR T
BEA-G2P T
BEA-G2PR T
Tan, 2-pt, NR
Tan, 2-pt, R*
Tan, 3-pt NR
Tan, 3-pt R
Tan, 2-pt NRG
Tan, 2-pt RG*
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
G
*
=
=
Push Button Style Buckle
Color matched retractor cover,
Otherwise cover is black.
MADE IN THE U.S.A
BEA-2P DB
BEA-2PR DB
BEA-3P DB
BEA-3PR DB
BEA-G2P DB
BEA-G2PR DB
Dark Blue, 2-pt, NR
Dark Blue, 2-pt R*
Dark Blue, 3-pt NR
Dark Blue, 3-pt R
Dark Blue, 2-pt NRG
Dark Blue, 2-pt RG*
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P PB
BEA-2PR PB
BEA-3P PB
BEA-3PR PB
BEA-G2P PB
BEA-G2PR PB
Powder Blue, 2-pt, NR
Powder Blue, 2-pt R
Powder Blue, 3-pt NR
Powder Blue, 3-pt R
Powder Blue, 2-pt NRG
Powder Blue, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P TU
BEA-2PR TU
BEA-3P TU
BEA-3PR TU
BEA-G2P TU
BEA-G2PR TU
Turquoise, 2-pt, NR
Turquoise, 2-pt R
Turquoise, 3-pt NR
Turquoise, 3-pt R
Turquoise, 2-pt NRG
Turquoise, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P CB
BEA-2PR CB
BEA-3P CB
BEA-3PR CB
BEA-G2P CB
BEA-G2PR CB
Cobalt Blue, 2-pt, NR
Cobalt Blue, 2-pt R
Cobalt Blue, 3-pt NR
Cobalt Blue, 3-pt R
Cobalt Blue, 2-pt NRG
Cobalt Blue, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P BR
BEA-2PR BR
BEA-3P BR
BEA-3PR BR
BEA-G2P BR
BEA-G2PR BR
Brown, 2-pt, NR
Brown, 2-pt, R
Brown, 3-pt NR
Brown, 3-pt R
Brown, 2-pt NRG
Brown, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P DBR
BEA-2PR DBR
BEA-3P DBR
BEA-3PR DBR
BEA-G2P DBR
BEA-G2PR DBR
Dark Brown, 2-pt, NR
Dark Brown, 2-pt, R
Dark Brown, 3-pt NR
Dark Brown, 3-pt R
Dark Brown, 2-pt NRG
Dark Brown, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P MB
BEA-2PR MB
BEA-3P MB
BEA-3PR MB
BEA-G2PR MB
BEA-G2P MB
Med Beige, 2-pt, NR
Med Beige, 2-pt, R
Med Beige, 3-pt NR
Med Beige, 3-pt R
Med Beige, 2-pt RG
Med Beige, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P LG
BEA-2PR LG
BEA-3P LG
BEA-3PR LG
BEA-G2P LG
BEA-G2PR LG
Lime Green, 2-pt, NR
Lime Green, 2-pt R
Lime Green, 3-pt NR
Lime Green, 3-pt R
Lime Green, 2-pt NRG
Lime Green, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P DT
BEA-2PR DT
BEA-3P DT
BEA-3PR DT
BEA-G2P DT
BEA-G2PR DT
Desert Tan, 2-pt, NR
Desert Tan, 2-pt, R
Desert Tan, 3-pt NR
Desert Tan, 3-pt R
Desert Tan, 2-pt NRG
Desert Tan, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P MG
BEA-2PR MG
BEA-3P MG
BEA-3PR MG
BEA-G2P MG
BEA-G2PR MG
Miltary Green, 2-pt, NR
Miltary Green, 2-pt R
Miltary Green, 3-pt NR
Miltary Green, 3-pt R
Miltary Green, 2-pt NRG
Miltary Green, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P BL
BEA-2PR BL
BEA-3P BL
BEA-3PR BL
BEA-G2P BL
BEA-G2PR BL
Blue, 2-pt, NR
Blue, 2-pt, R
Blue, 3-pt NR
Blue, 3-pt R
Blue, 2-pt NRG
Blue, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P DG
BEA-2PR DG
BEA-3P DG
BEA-3PR DG
BEA-G2P DG
BEA-G2PR DG
Dark Green, 2-pt, NR
Dark Green, 2-pt R
Dark Green, 3-pt NR
Dark Green, 3-pt R
Dark Green, 2-pt NRG
Dark Green, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P EB
BEA-2PR EB
BEA-3P EB
BEA-3PR EB
BEA-G2P EB
BEA-G2PR EB
Electric Blue, 2-pt, NR
Electric Blue, 2-pt, R
Electric Blue, 3-pt NR
Electric Blue, 3-pt R
Electric Blue, 2-pt NRG
Electric Blue, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P GR
BEA-2PR GR
BEA-3P GR
BEA-3PR GR
BEA-G2P GR
BEA-G2PR GR
Gray, 2-pt, NR
Gray, 2-pt R*
Gray, 3-pt NR
Gray, 3-pt R
Gray, 3-pt NRG
Gray, 3-pt RG*
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
* denotes color matched retractor cover, otherwise cover is black.
7
BEA-2P S
BEA-2PR S
BEA-3P S
BEA-3PR S
BEA-G2P S
BEA-G2PR S
Silver, 2-pt, NR
Silver, 2-pt R
Silver, 3-pt NR
Silver, 3-pt R
Silver, 2-pt NRG
Silver, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P O
BEA-2PR O
BEA-3P O
BEA-3PR O
BEA-G2P O
BEA-G2PR O
Orange, 2-pt, NR
Orange, 2-pt R
Orange, 3-pt NR
Orange, 3-pt R
Orange, 2-pt NRG
Orange, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P I
BEA-2PR I
BEA-3P I
BEA-3PR I
BEA-G2P I
BEA-G2PR I
Ivory, 2-pt, NR
Ivory, 2-pt R
Ivory, 3-pt NR
Ivory, 3-pt R
Ivory, 2-pt NRG
Ivory, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P WH
BEA-2PR WH
BEA-3P WH
BEA-3PR WH
BEA-G2P WH
BEA-G2PR WH
White, 2-pt, NR
White, 2-pt R
White, 3-pt NR
White, 3-pt R
White, 2-pt NRG
White, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P PU
BEA-2PR PU
BEA-3P PU
BEA-3PR PU
BEA-G2P PU
BEA-G2PR PU
Purple, 2-pt, NR
Purple, 2-pt R
Purple, 3-pt NR
Purple, 3-pt R
Purple, 2-pt NRG
Purple, 2-pt R
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P Y
BEA-2PR Y
BEA-3P Y
BEA-3PR Y
BEA-G2P Y
BEA-G2PR Y
Yellow, 2-pt, NR
Yellow, 2-pt R
Yellow, 3-pt NR
Yellow, 3-pt R
Yellow, 2-pt NRG
Yellow, 2-ptRG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
BEA-2P WR
BEA-2PR WR
BEA-3P WR
BEA-3PR WR
Wine & Roses, 2-pt, NR
Wine & Roses, 2-pt R
Wine & Roses, 3-pt NR
Wine & Roses, 3-pt R
$30/set
$60/set
$60/set
$125/set
BEA-2P W
BEA-2PR W
BEA-3P W
BEA-3PR W
Wisteria, 2-pt, NR
Wisteria, 2-pt R
Wisteria, 3-pt NR
Wisteria, 3-pt R
$30/set
$60/set
$60/set
$125/set
BEA-2P C
BEA-2PR C
BEA-3P C
BEA-3PR C
BEA-G2P C
BEA-G2PR C
Charcoal, 2-pt, NR
Charcoal, 2-pt R
Charcoal, 3-pt NR
Charcoal, 3-pt R
Charcoal, 2-pt NRG
Charcoal, 2-pt RG
$30/set
$60/set
$60/set
$125/set
$35/set
$65/set
Also visit us online
CARPET
FOR SPECIFIC MAKE / MODEL / YEAR
RODDER’S KITS FOR ANY VEHICLE
and insulation. There is sufficient material
to do the floor and trunk of vehicles within each size
group. If you need more material, you can purchase
it by the yard.
We offer prefitted carpet and trunk products, either molded or sewn, and
floor mats for most any MAKE / MODEL / YEAR vehicle since 1950. Logos
can be added to floor mats. We maintain a searchable database, so call us,
800-428-7114 and we’ll do a search for your vehicle.
Our RODDER’S KITS consist of carpet, binding heel pad, all color matched,
MOLDED FLOOR CARPET
80/20 LOOP KIT
FLOOR MATS
Cut pile and 80/20 Loop molded
to a perfect fit. Over 1,500 styles
available. Made from Dupont
Antron 1405, these are the only
true 80/20 carpets in the industry.
EXCLUSIVE from RodDoors, all
truck versions have an additional
12” of length to compensate for
gas tank removal.
Made to meet the original OEM
specifications, these mats are
color matched to carpet colors
and have Grip Lock, Non-Skid
back. Mats can be embroidered
with a logo — with over 150 to
choose from. The logo can be
positioned at the top, middle or
bottom of the mat.
Includes 21/2 yds. Of carpet
72” wide, binding and
Heel pad and insulation.
Additional material by
The yard is available.
ACC-15126 Coupe-Roadster Kit $189
ACC-151265 Sedan-Van Kit-5yds $378
ACC-16057 For 2 Floor Mats
$75
$99
ACC-8020LOOP Per yard
$75/yd
$75
$99
ACC-CUTPILE Per yard
$75/yd
DAYTONA
WEAVE KIT
Includes 5 yds. Of carpet
The yard available.
$125
ACC-DAYTONA WEAVE
$95/yd
ACC-UNBACKED
$95/yd
Call For Pricing and Availability
To order a specific molded
carpet, floor mat or trunk liner,
call Customer Service,
800-428-7114
Between 10 a.m. And 6 p.m.
Eastern Time and we’ll tell you
what’s available for your vehicle.
TRUNK LINERS
Need ng
hi
Somet? Call us
t
n
Differe e’ll find a
w
d
An
n for
Solutioride!
Your
Trunk liners are made from the
original materials in the correct
patterns, styles and colors. Vinyl
mats are printed on 6.5 oz. Heavy
vinyl then die-cut or vacuum
molded for a perfect fit.
Color Combo BRWA
CARPET: Daytona Weave, Brown
SEAT: Ultraleather,® Raven Wing
INSERT: Ultraleather,® Abobe
THE HISTORY OF UPHOLSTERY
as viewed through the twisted mind of
D. Big Deal. These illustrations prove that
since the dawn of time man has tried to
improve his/her lot, take care of the family,
and repair the family’s form of transport.
Never an easy job, at least with the passing
of time we have gained new materials, new
processes and help from RodDoors.
8
CUT PILE KIT
Includes 2 /2 yds. Of carpet
The yard available.
1
ESSEX DOUBLE
THICK CUT PILE
Includes 21/2 yds. Of carpet
The yard available.
$150
$198
ACC-ESSEX DBL THICK CUTPILE $150/yd
Note: All of our Products are subject to a 25% restocking fee. Non
standard colors or custom carpets
are not returnable. Please call us
if you are not sure and let us help
you walk though the process..
CARPET
80/20 LOOP
003 Black
1956 Charcoal
893 Gunmetal
012 Silver
017 Brown
1021 Dark Saddle
1965 Parchment
002 Lt. Med. Saddle
6364 Medium Saddle
022 Gold
1506 Dark Gold
105 Ivy Gold
020 Fawn Sandal Wood 1121 Plum
880 Midnight Blue
878 Dark Blue
1965 Dark Teal
013 Blue
001 Bright Blue
6166 Silver Mink
016 Ford Blue
009 Medium Blue
1011 Dark Green
26-069 Dk Olive
021 Blue Green
018 Moss Green
1970 Dark Green
1900 Light Green
883 Aqua
010 Maroon-Oxblood
019 Emberglow
5859 Coral
1966 Copper
90 Burnt Orange
005 Red
6364 Medium Red
436170 Sunset Glow
4429 Orange
5010 Black
7165 Gray
7166 Brown
7157 Bronze
7150 Red
7164 Beige
7154 Dark Blue
7162 Blue
7167 Frost Blue
7161 Medium Blue
7153 Dark Green
7163 Light Green
7160 Aqua
5010 Purple
$75/yd
DAYTONA WEAVE
Exclusive! Backed or
Unbacked Purple
$95/yd
The sample above shows both
the weave of the Daytona Weave
line and our exclusive, Purple
color. Daytona Weave is available
both foam backed and unbacked,
giving you the flexibility to use
this material as carpet or as fabric
on kick panels and door panel
inserts.
ESSEX DOUBLE
THICK CUTPILE
$150/yd
A RodDoors Exclusive
Gross Pointe
For Additional
Product Pricing
see page 8.
E-156 Beige
R-157 Red
1035 Beige
1016 Red
1097 Charcoal
1004 Cream
1068 Medium Gray
1017 Lapis Blue
1001 Black
1054 Caramel
1045 Maroon
1066 Gray
1044 Midnight Blue
1053 Silver
Twice as thick as other cutpiles.
TIP
S
NOTES ABOUT COLOR
In our quest to help you create the hot rod interior of your
dreams, we’re presenting color swatch graphics as shown
to the left. These swatch samples are designed to show
carpet as the background element, and a somewhat
abstract representation of a bench seat with inserts as
seen from above.
There are sixteen swatches in the book representing the
most popular color combinations we see at the many rod
shows we attend every year.
9
Much has been written about the theory of color and
how it impacts people. Much could also be discussed
about fabric types and textures. But we won’t attempt
that kind of talk here.
If your car is already painted, go with a combo you see,
or use the swatches to help you identify another color
combination that will work best for your car.
If your car isn’t painted, review the “Interior Before Paint’”
article on the inside back page of this catalog before
deciding on your ideal interior color scheme. Then pick a
paint color to work with it. In either case, we think you’ll
find these swatches to be very helpful guide in making
color and material decisions.
CARPET
CUT PILE
801 Black
897 Charcoal
7701 Graphite
7768 Bronze
902 Medium Taupe
907 Taupe
907 Taupe
901 Silver Fern
903 Misty Gray
827 Gray
807 Dark Grey
7103 Agate
$75/yd
87 7 Dove Gray
7705 Med. Fern Gray
9199 Smoke
857 Medium Gray
9779 Medium Gray
852 Silver
9196 Medium Opal
1804 Silver
4666 Smoke Grey
7623 Med. Sand Gray
8046 Silver
7715 Gray
8993 Light Titanium
8023 Gray
810 Brown
7500 Briar Brown
7504 Briar Brown
2438 Bronze
9197 Medium Mocha
4896 Dark Russet
820 Saddle
7051 Saffron
7288 Cinnabar
8296 Nutmeg
4640 Dark Saddle
9205 Cognac
850 Chamois
906 Sandstone
9006 Light Mocha
8991 Fort Sandalwood
9777 Medium Beige
871 Sandalwood
9577 Med. Dark Oak
821 Taupe
830 Buckskin
7140 Medium Saddle
7037 Camel Tan
7295 Medium Doeskin
7577 Gold
7099 Antelope
8384 Desert Tan
7769 Light Saddle
7087 Doeskin
1251 Almond
854 Caramel
7075 Oyster White
9195 Rosewood
7593 Medium Beige
8500 White
905 Blue
7130 Dark Blue
840 Navy
819 Dark Blue
8022 Blue
4033 Midnight Blue
839 Federal Blue
9304 Regatta Blue
7879 Ford Blue
7625 Blue
8019 Midnight Blue
812 Royal Blue
8082 Crystal Blue
9229 Steel Blue
802 Blue
4073 Dark Blue
6699 Lapis Blue
7766 Blue
816 Lake Blue
4643 Powder Blue
8791 Metallic Blue
7980 Dark Green
849 Jade Green
657 Blue Green
809 Green
869 Willow Green
859 Light Jade
4880 Sage Green
808 Turquoise
8047 Dark Aqua
8042 Jadestone
875 Oxblood
7298 Maple
9302 Cranberry
885 Light Maroon
825 Maroon
4305 Oxblood
815 Red
7039 Carmine
835 Firethorne
8801 Flame Red
4751 Firethorne
7293 Red
9936 Torch Red
1999 Power Pumpkin
1998 Royal Purple
2004 Electric Blue
2003 Limelite Green
2005 Hugger Orange
2001 Flaming Fuchsia
2000 Chrome Yellow
4645 Mandarin Orange
818 Ocean Blue
9933 Ruby Red
Color Combo ajp
CARPET: Daytona Weave, Aqua
SEAT: Ultraleather,® Juniper
INSERT: Ultraleather,® Putty
A little imagination, a little bit of work, and
wow! There are six colors of fabric at work
here, on this “Norton” Panel for a `48-`52 Ford
Truck. What you can’t see is that the panel was
covered to match the exterior paint.
10
For Additional
Product Pricing
see page 8.
Not Enough Choices?
FABRICS
ULTRALEATHER®
It’s rich texture and supple feel
provides the look and feel of the
finest European calfskin, and is not
PVC (vinyl). It is durable, easy to
clean requiring no special cleaning
and is easier to maintain than
leather. There are over 105 fantastic
colors available.
$98/yd
291-5805 Ermine
291-3599 Almond
291-3455 Milkweed
291-3700 Ivory
291-3850 Sand
291-3470 Shell
291-3720 Light Oyster
291-3719 Champagne
291-3602 Stone
291-5666 Dove Grey
291-5668 Silver Pearl
291-3601 Doe
291-3609 Buff
291-5684 Arctic
291-6580 Sorbet
291-3926 Cashmere
291-4484 Thyme
291-3927 Mocha
291-3779 Taupe
291-3925 Silk
291-1312 Chianti
291-3729 Tan
291-3851 Chamois
291-1311 Brick
291-1256 Papyrus
291-3778 Pecan
291-3469 Garnet
291-3777 Walnut
291-8219 Adobe
291-9337 Berry
291-3173 Abalone
291-3612 Curry
291-7326 Neptune
291-9385 Plum
291-3610 Hide
291-3928 Rasinette
291-5708 Granite
291-2687 Bayou
291-7278 Mayan
291-2551 Baltic
291-1384 Wild Rose
291-3182 Timber
291-2555 Nile
291-2603 Marine
291-4262 Orchard
291-4460 Parrot
291-2478 Diplomat Blue 291-4261 Juniper
291-4430 Eucalyptus
291-2556 Admiral
291-8241 Hot Sauce
291-4351 Shetland
291-2552 Rivierra
291-5763 Charcoal
291-4427 Mystic
291-8242 Copper
291-5250 Sassy
291-5806 Schooner
291-2554 Sappire
291-1176 Red
291-4352 Loden
291-2553 Cyan
291-0001 White
291-5676 Pelican
291-4468 Palm Leaf
291-5607 Raven Wing
291-3972 Lasso
291-4469 Aloe
291-4462 Fern
291-8225 Mandarin
291-3183 Pine Cone
291-4522 Oregano
291-4461 Cactus
291-5814 Licorice
291- 3976 Bridle
291-8243 Apricot
291-3666 Fudge
291-5260 Nectar
291-3620 Praline
291-5840 Licorice Root
291-3669 Cashew
291-2691 Midnight
291- 3935 Wheat
291-5255 Bamboo
291-1315 Grenadine
291-2700 Rock Water
291-3026 Cypress
291-1385 Hawthorne
291-9411 Juniper Berry
291-4498 Green Tea
291- 8249 Gilt
291-3153 Peat
291-3029 Cassia
291-3025 Honeysuckle
291-5843 White Lotus
291-3028 Chestnut Bud
291-2679 Blueberry
291-5675 Sterling
291-3172 Starlight
291-3151 Desert Willow 291-5839 Bentonite
291-2699 Indigo Blue
291-5257 Lemon Grass
291-4508 Crab Apple
291-3027 Chicory
ORDERING FABRIC
• Order all your fabric at once to
ensure consistent color. Dye
lot variations in color can and
will occur.
• Order an extra yard or two in
case of mistakes.
• Complete sedans and coupes
usually require 14 yds. Of
fabric; trucks 10 yds.
• Fabrics are 54” wide. A yard is
54” x 36”.
Sample swatches available
upon request.
TIP
S
TRIMMING
We’ve seen people use skill saws, saber saws, hand saws,
and die grinders on our plastic panels. But, nothing
works better than a simple, sharp utility knife. Chalk out
a line, score with your utility knife and snap like wallboard
to break. All the plastic parts that we sell will sand like
wood, drill like wood, and break like tile. So trimming out
a panel is a snap.
MISTAKES
The biggest fear that most people have is that they’ll
make a mistake. Not a big deal. If you trim a panel too
small you can always glue it back together with ABS
pipe cement. Add a backer plate from scrap so the joint
is not just a butt joint. Once the repair has dried you can
sand it smooth, retrim and the fabric will cover over the
repaired seam.
But always remember our Motto, “Call twice, cut once”
If you can dream it up, we want you to get there. Call us
anytime if you need help making your idea a reality.
EXTRA DETAIL
Any panel can have extra detailing add onto it in
several ways.
DESIGN OR NO DESIGN
Some builders are quite content with our preformed
designs. Others have their own ideas and designs. For
those builders we offer Flat Stock and RodFoam. Flat
Stock offers the greatest freedom to go your own way.
A flat panel is a clean slate where the only limitation is
that thing between your shoulders.
11
One way is to cut scrap ABS plastic to the design you
want and glue it directly to any panel with ABS plastic
pipe cement. When the fabric is applied over the panel
the “design” will show through as another design element. This is in addition to what was originally on the
panel for an “Embossed” look. You could do this with
Call Us, We’ve Got More,Much More.
FABRICS
ULTRASUEDE®
This beautiful soft, plush material
is rugged, has excellent colorfastness and resists sagging, cracking,
pilling and shrinking. It is available
in over 97 contemporary colors.
5810 Platinum
3587 Devon
5789 Graphite
2328 True Blue
2323 Periwinkle
2679 Moonstone
5238 Topaz
9441 African Violet
2755 Brittany
4577 Citron
4484 Fern
2754 Malibu
5566 Pewter
3694 Ivory
1240 Mulberry
3890 Teakwood
6496 Wine`n Roses
9390 Wisteria
4396 Sage
3696 Wheat
8253 Terracotta
3888 Desert Camel
1304 Scoundrel
9391 Amethyst
3582 Almond
5243 Harvest
1155 Burgundy
4504 Willow
5709 Black Onyx
8265 Orange Sherbert
3281Camel
5206 Ginger
5283 Sunshine
4398 Lichen
1402 Claret
4488 Lime
3917 Khaki
5207 Cumin
3093 Spice
4397 Eucalyptus
3147 Coffee Bean
4483 Mystic
3918 Peat
3885 Curry
6628 Hot Pink
4342 Shetland
4558 Emerald Sea
6630 Pink
1365 Cordovan
4341 Moss
3588 Hide
9451 Lavender
4147 Opalene
3282 Fawn
5912 Polar White
3424 Chablis
3280 Chamois
3274 Beaver
4560 Leaf
7142 Real Teal
2756 Horizon
3092 Sahara
3581Doe
3584 Sand
8175 Clay
1401Maderia
4559 Jade
8202 Tile
5239 Goldenrod
3279Sandstone
3583 Bisque
3586 Terra
4557 Green Apple
3891 Aztec
5237 Candlelight
8223 Orange
5788 Charcoal
6232 Blush
3589 Sequoia
2329 Steel Blue
1334 Tomato
3889 Brownstone
1367 Red
3271Taupe
3916 Doeskin
8201 Roasted Pepper
2539 Baltic
2680 Slate Blue
8224 Canyon
9393 Wild Plum
4487 Evergreen
2330 Indigo
2530 Regal Blue
4485 Cactus
9392 Blueberry
$149/yd
NOTE: Due to variations in printing, the color of fabrics and carpet
samples shown in this catalog will
vary from the actual material.
1364 Navajo Red
3697 Mica
Color Combo fss
Several layers for an even more intricate look.
Another way to add extra detailing is to use our
RodFoam as shown on page 34. RodFoam is manufactured from the same high density closed cell foam
that professional upholsterers use, only we’ve added
an adhesive to the back to make installation faster
and quicker. Foam is used to soften a panels look.
Foam is used sparingly, on the tops of armrests or
anywhere that the arm may rest. Foam can also be
used to add that “extra” detail to a panel. Like with our
die cut emblems.
CARPET: Cut Pile, Flaming Fuschia
SEAT: Ultraleather,® Sassy
INSERT: Ultraleather,® Sorbet
Panel will wash out the “design”.
Anywhere there is a panel break or line in the panel
you want to cut the foam 1/8”-1/4” away from that
line, that will prevent the RodFoam from washing out
the design. Prior to covering the panel will have a
“Guernsey Cow” like look, with lots of black and lots of
white on the panel.
Remember, when using RodFoam you don’t want to
cover the entire panel with foam. Covering the entire
12
RODDOOR SEATS
COVERED OR
UNCOVERED, IT’S
YOUR CHOICE
BUCKET SEATS
LASSEN
Bucket or bench, these well-built
seats are ready to bolt to your
original track or our optional
risers.
SUTTER
They all recline!
Offered Covered or Uncovered,
our uncovered seats include
pre-trimmed foam.
Buy them covered and we can
upholster them in any combination you desire, all tweed, vinyl,
Ultrasuede,® or Ultraleather® or
you can create two-tone combinations. You tell us what you
want and we’ll do it, just so long
as it fits the basic designs shown
on these pages.
For color consistency in your
interior, order all your seat and
interior panel fabric at the same
time to ensure the same dye lot.
We’ll ship your panel fabric after
pulling the amount required for
your seats, or we’ll send it all
together with your finished seat.
It’s your call.
For covered seats, please allow
at least six to eight weeks from
your order date for delivery of
your finished seats.
All seats can be shipped UPS
Ground saving you hundreds
of dollars over the cost of a LTL
trucking delivery.
PINCHED?
Pinched Seats are available on Bucket Seats and
all Bench Seats. Each seat
is Tapered 2” less in the
Front from the rear seat
width. This exclusive feature allows the seats to
not only conform to many
early cars that have extremely narrowed bodies
but also allows the seats
to travel further on the
tracks, making the car fit
better for those couples
with dramatic height differences.
LASSEN ll
HOW TO
O R D E R S E AT S
To ensure a proper fit, several
m e a s u re m e n t s n e e d t o b e
taken, which will vary between
car models and years. Call
customer service with your
make, model and year and we
will guide you through taking
the correct measurements for
your order.
This couple first met us in Bakersfield in March. There they selected their
fabrics, RodDoor Panels, Seat with Custom Embroidery, Underdash, Column Cover, Deck Lid, RodFoam, Rear Cab Cover and Flat Stock for all
BURNEY
SEAT ACCESSORIES
ADJUSTABLE RISER
Seat tracks are only included with
all covered seats. All seats direct
mount ONLY to existing frame or
pedestal.
RD6108 Seat Track
$40pr
CHEVY TRUCK ADAPTERS
For use when original seat mount is gone.
Our adjustable unit moves up/down
from 2.25” to 4.75” high, front to back for
2.125” and tilts
RD5020 Adjustable Riser
$65/pr
13
RD-6110 `47-early `55
RD-6111 late `55 - `59
RD-6112 `60-`66
RD-6113 `67-`72
RD-6114 `73-`87
the other areas like trunk panels and headliner. We did our part
and sent out all the parts. We met up with them again in August in
Louisville. They had finsihed the car and had just driven from California
$65
$65
$65
$65
$65
RODDOOR SEATS
BENCH SEATS
SEAT PRICING
FRAME COVERED
BASE FRAME UNIT WITH
FOAM AND FABRIC
SOLID-BACK BENCH
Tweed or vinyl fabric
$1,595
Ultraleather® outer, tweed insert $1,695
Ultraleather® outer and insert
$1,695
Ultraleather® outer,
Ultrasuede® Insert
$1,695
Ultrasuede® outer,
Ultrasuede® Insert
$1,795
BROKEOFF
BURNEY
BIDWELL
LASSEN II
SUTTER
TEHAMA
SPLIT-BACK BENCH
$1,695
Ultraleather® outer and insert $1,795
Ultrasuede® Insert
$1,895
Ultrasuede® outer,
Ultrasuede® Insert
$1,995
STRATO BENCH
Ultraleather® outer, tweed inset
Ultrasuede® Insert
Ultrasuede® outer,
Ultrasuede® Insert
$1995
$1995
$2095
$2195
BUCKET SEAT
Ultrasuede® Insert
Ultrasuede® outer,
Ultrasuede® Insert
$850ea
$850ea
$850ea
$900ea
$950ea
FRAME UNCOVERED
REMOVABLE ARM REST
LASSEN
The removable armrest works
specifically with RodDoors seats.
The two wide fabric straps fore and
aft wrap down the front and back
of the seat and attach with Velcro®
to the seat frame. With little effort,
this comfortable arm rest can be
installed or removed. This is a good
solution for that occasional center
passenger.
RD-6091 Armrest with cup holders $149
RD-6092 Armrest w/o cup holders $129
Color Combo bcc
CARPET: Daytona Weave, Dark Brown
SEAT: Ultraleather,® Curry
for the Nationals. Check out the four colors on the door and the extra
detail put into the trunk. We were just blown away, and they did it
all themselves.
14
FOAM, NO FABRIC
Specify width from 41” to 59” in 2” increments
RD-6020 Solid-Back bench style $1095
RD-6030 Split-back style
$1,295
RD-6060 19” straight Bucket
RD-6071 21” straight Bucket
RD-6070 19” pinched Bucket
$495 ea
$495 ea
$495 ea
All prices shown are
Suggested retail prices.
RODDOOR SEATS
SPLIT-BACK BENCH
STRATO BENCH
`55 -̀ 57 CHEVROLET
SEDAN
REAR SEAT
This is a custom design for the sedans only. The
wider design of the quarter panels provides for
an arm rest and allowed us to square off the seat
to create a matching look to the front seat. The
finished look is nothing short of awesome! See
page 28 for info on the quarter panels.
Our Split Back Bench Seat Works great
in Coupes and Sedans where you need
access behind the seat, but folding both
sides at the same time may not always
be practical. This Seat is Available in all
styles except Brokeoff. In widths from
41” to 59” in 2” increments
Our New Strato Bench incorporates many
of the most desired features in a bench
seat. This Bench Bottom, Bucket Backed
seat has a center armrest with built in cup
holders that fold away for that third passenger when needed. A Great solution for
Tri-Five Sedans, Muscle cars and Customs.
Currently available only in a 55”.
SPLIT-BACK BENCH STYLE
Fold down one side, or both!
Note: This rear seat is a custom width and
cannot be used as a replacement for the
original seat.
FRAME UNCOVERED
FOAM, NO FABRIC
RD6039 This seat is a custom width
for use with RodDoors Rear
Quarter Panels ONLY
$1,295
FRAME UNCOVERED
FOAM, NO FABRIC
BIDWELL OR BURNEY STYLE
MOLDED STORAGE POCKETS
SEAT HEATERS
EMBROIDERY
Molded storage pocket in seat back for
RodDoors’ bucket and bench seats.
RD6725 Fits bucket seats
RD-6093 Fits bench seats
$159/pr.
$159/ea.
Embroidery is available for any covered seat.
Send us your design, or use one of our designs.
Call for more info and pricing. Pricing is based on
design complexity, so be prepared to provide us
with an example of what you would like to do.
$1,595
Ultrasuede® insert
$1,895
Ultrasuede® outer,
Ultrasuede® insert
$1,895
LASSEN, II & SUTTER STYLES
$1,595
Ultrasuede® insert
$1,895
Ultrasuede® outer,
Ultrasuede® insert
$1,995
RD6200 Installation available at an
additional cost when purchased with a
RodDoors’ seat
$275/set
RD-EMB
Lassen ll Bench Seat with “Bobeck” door
panels.
15
CALL
“The Serrano” armrest installed on this door
with the door pull in place and power window
switches mounted into the armrest itself.
VERY TRICK CONSOLES AND STUFF
OVERHEAD CONSOLE
Made of ABS plastic, this console can be
easily trimmed to fit the roof contours of
any truck, rod, or classic. The faceplate
is designed to fit standard DIN mount
radios, but is large enough for air ride
gauges, switches, 2-1/8” gauges or you
can cut out the opening for extra storage.
The large rear area is ideal for a courtesy
light or more power window switches.
This console can be upholstered or
painted with standard vinyl dye to match
your interior.
RD4020 Overhead Console
$79
‘BIG UN’
CENTER CONSOLE
CENTER CONSOLES
MUSTANGS `64 1/2 - `68
Center
Consoles
c o m e s
with either
a shifter boot
or a coin holder
and are available
with 1, 2 or no cup
holders. Made of ABS, it can be easily
trimmed down from its original length
of 33” and height of 9”. The console has
room for mounting power window
switches or gauges on the top of the
unit.
Pretrimmed designer door panels with built-in armrests. For pennies over
the cost of stock replacement panels, and for a lot less than the cost of new
Pony panels, you can give your Mustang a very cool, updated look.
RD4001 No cup, w/change tray
RD4000 No cup w/boot
RD4003 1 cup w/boot
RD4006 2 cup w/boot
RD4004 1 cup w/change tray
RD4007 2 cup w/change tray
Colored boots available
$99
$99
$99
$99
$99
$99
$20
THE FURY
THE SCOUT
DESIGN: SID CHAVERS
RD7110 Fury- `64-1/2 - `66
Mustang
$199/pr
DESIGN: SID CHAVERS
RD7112 Scout`67 - `68
Mustang
$199/pr
See page 6 for Door Pull Kits
THE SILVER
THE TRIGGER
DESIGN: SID CHAVERS
RD7111 Silver- `64-1/2 - `66
Mustang
$199/pr
DESIGN: SID CHAVERS
RD7113 Trigger- `67 - `68
Mustang
$199/pr
FULL LENGTH
CENTER CONSOLE
Shifter Boot
included with
each Console
CHRYSLER AIRFLOW
Center Console designed to accommodate a B&M Shifter. Comes with a cup
holder
RD4008 Big Un Center Console
$99
DECK LID LINER
‘NOT SO BIG UN’
CENTER CONSOLE
Just when you thought it was safe the
folks at RodDoors throw something
new at you. Developed originally for the
Camaro Project, this full length console
can be trimmed to fit many Rides. Can be
used as an overhead console as well as a
Perfect for the automatic transmission crowd
shifter cover. Will adapt to almost every
that don’t have a shifter, but still need the
transmission hump. Lots of space for extra
“Extras” like cup holders, switch box, catchgauges, switches or emergency brake
all trays.
mount. Unit is 8” tall, 9” at it’s widest, and
RD4025 NSBU Center Console
$99
60” in length.
RD4031 Full Length Center Con
$199
RD3901 `34 - `37 Chrysler
Door Panels
Color Combo ccc
CARPET: Cut Pile, Cinnibar
SEAT: Ultraleather,® Curry
INSERT: Ultrasuede,® Candlelight
“The Hollywood” door panel mounted backwards
with the door pull mounted underneath the armrest for a truly hidden yet still functional look.
16
$249/pr
RD7116 `64-1/2 - `66
Mustang Coupe
RD7118 `67-`68
Mustang Coupe
RD7117 `64-1/2 - `66
Mustang Fastback
RD7119 `67-`68
Mustang Fastback
$189
$189
$189
$189
TRIM-TO-FIT UNIVERSAL DOOR PANELS
THE YOUNGSTER
THE HAYWARD
THE COALINGA
THE PULVER
30”
Design
23” or30”
Design
23”
Design
DESIGN: DON'S HOT RODS
RD2532
$189/pr
DESIGN: TAYLOR DESIGNS
RD2507 23” design
$189/pr
RD2508 30” design
$189/pr
RD2504
$189/pr
DESIGN: TODD EMMONS
RD2524 W/armrest
$199/pr
RD2525 W/o armrest, for rear
Qtrs or doors
$189/pr
THE ROGERS CREEK
THE CATALINA
THE RIDGECREST
THE CALAVARAS
30”
Design
Armrest
& Map
Pockets
Sold
Separately
30”
Design
RD2503
$189/pr
30”
Design
23”
Design
DESIGN: RODDOORS
RD2528
30”
Design
DESIGN: THOM TAYLOR
$189/pr
RD2527
$189/pr
RD2502 30” design
$189/pr
ALL panels are 44”w x 32” h
THE NEWPORT
Full
Width
Design
30”
Design
DESIGN: THOM TAYLOR
RD2523
Full
Width
Design
RD2506
Raised panel
available
23” & 30” Design
DESIGN: RODDOORS
DESIGN: RON MANGUS
$199/pr
THE LOMA PRIETA
THE FLAME
THE FLAME ll
$189/pr
RD2505
NOTE: RodDoors are designed to fit doors that originally had flat panels. If your existing panel rolls at the top into
the window channel, additional work will be needed to adapt RodDoors to work with your vehicle. Call for details.
$189/pr
RD2516 23” design w/flat insert $189/pr
RD2517 30” design w/flat insert $189/pr
RD2518 23” design w/raised in $199/pr
RD2519 30” design w/raised in $199/pr
Coated Inserts, RED or BLACK CARBON
FIBER, WALNUT BURL, or HAWAIIAN KOA
Wood Finishes
$189/pr
FAQ
S
HOW DO I FIT AN ARMREST?
HOW BIG ARE THE TRIM- TO- FIT UNIVERSAL
PANELS?
44” x 32”. Each set contains two black ABS panels, right and
left, with the pattern centered in each panel. See detailed
diagram on page 2.
WHAT SIZE ARE THE PATTERNS?
23”, 30” & 36”. The designs are sized so you can trim the outside dimensions of the panel to fit your door without cutting into the design. See detailed diagrams on page 2.
Some panels have an integrated armrest, or you can add a
modular armrest (see page 5).
WHAT ABOUT MY REAR DOORS AND PANELS?
Several styles can be purchased in double sets for rear doors
or quarter panels. Reversing the panels in the rear allows the
design to flow through the car. The Healey above is a good
example. Also, see the examples on the bottom of page 19.
HOW DO I TRIM THE PANELS?
Use your old panels as a template or make a new template
from cardboard. Transfer the pattern to the new panel. Use
17
a sharp utility knife to score the trim line and then break off
the excess. Drill appropriate sized holes for door handles
and window cranks.
COVERING YOUR PANELS?
Oversize your material by 2”-3” all around the panel. Fold the
material in half, starting in the center or over the armrest.
Spray adhesive on a 2 sq. Ft. area of both the panel and
material, let it tack up. Then stretch the material over the
armrest and work your way up and down the panel. Once
you have the center down, work toward the outside edges in
strips 2 sq. Ft. at a time. Glue Cheese Hi-Temp spray adhesive
is recommended.
TRIM-TO-FIT UNIVERSAL DOOR PANELS
THE MALIBU
THE HOLLYWOOD AR
THE HOLLYWOOD
THE IMPERIAL
Great for Rear
Quarter Panels
23”
Design
DESIGN: THOM TAYLOR
RD2520
$189/pr
Full
Width
Design
30”
Design
DESIGN: RON MANGUS
RD2512 W/o armrest
$189/pr
DESIGN: RON MANGUS
RD2511 W/armrest
$189/pr
SHAKE, RATTLE
& ROLL - FULL
SHAKE,RATTLE & ROLL
SHAKE, RATTLE
& ROLL - 3/4
Great for Rear
Great for Rear
Quarter Panels
Quarter Panels
3/4
Design
Fits
Most
Widths
Full
Width
Design
DESIGN: RON MANGUS
RD2529 W/o armrest
$189/pr
Requires two-tone clips for
Use with vinyl
RD2531 30” design
$189/pr
Use with vinyl
DESIGN: RODDOORS
RD2513 23” design
RD2514 30” design
RD2515 36” design
RD2580 Matching Kick Panels
$189/pr
$189/pr
$189/pr
$ 69/pr
THE RICHTER
Full
Width
Design
30”
Design
DESIGN: RON MANGUS
Order a
second set
for Rear
Quarter
Panels or
Doors.
23”
30”
36”
Design
DESIGN: RON MANGUS
DESIGN: RODDOORS
RD2530 W/armrest
$199/pr
Use with vinyl
RD2526 23” design
$189/pr
Order a second set for rear qtrs or doors
ALL panels are 44”w x 32” h
THE MUSHU
THE BOBECK
32w x 44h*
Very cool flow-thru design when using the
panels together! Or you can use them singly
on your Model A,
`68 Chevelle and
other undiscovered models.
Available with
or w/o armrest
23”
Design
DESIGN: THE UNKNOWN UPHOLSTERER
RD2501 W/o armrest
$189/pr
RD2500 W/armrest
$199/pr
23”
Design
Full
Width
Design
DESIGN: RODDOORS
DESIGN: WING KNUT
RD2533 Mushu
THE TRANSTAR
THE HEALEY
FRONT & REAR
$199/pr
* NOTE: The new dimensions!
DESIGN: DENNIS PARKS
RD2509 Front panel
$199/pr
RD2510 Rear panel for 4 doors
Or 2 door Qtr Panels
$199/pr
RD2534 Transtar no/armrest
RD2535 Transtar w/armrest
$189/pr
$199/pr
THE ZEPPO
HOW ARE YOU KEEPING THE PANELS ON THE
DOORS? NO CLIPS, NO SCREWS?
RD2536 Zeppo w/armrest- front panel $199/pr
RD2537 Zeppo w/o armrest-rear panel $189/pr
Great for 4 door cars or Quarter Panels
We use 3MTM Dual Lock TM Tabs. More info on
Page 2.
ISN”T THERE A GAP, CAUSED BY THE DUAL LOCK
TABS, KEEPING THE PANELS OFF THE DOOR?
I Don’t SEE MY CAR LISTED, DON’T YOU HAVE ANYTHING THAT WILL WORK?
Of Coarse, that’s what this system was designed
to do. We can fit most any pre-1970 door off of
whatever car you can name. So whether you own
a Leadsled Mercury, Oldsmobile, Humpmobile, or
Rambler we have a panel that will work for you. If
your not sure, call us at the number listed at the top
of this page for a helping hand.
Included in each Trim-to-Fit Installation Kit is a roll of
self adhesive Foam Edge Tape. When applied flush
to the edge of the door on the back of the panel,
the Tape will fill in any gap that the Tabs holding
the panel off the door may have caused. Additional
benefits of this method is that should there be an
indentation in the door; instead of a gap we can
double up on the tape, before covering and fill in
any gaps.
18
Full Width Design
DESIGN: DAVE HILL
MODEL A THRU `34 FORD COUPES AND SEDANS
UNIVERSAL REAR
CAB COVER
BENCH SEATS
Fits `28-`34 roadsters and many other
vehicles.
• 32” tall x 58” wide x 18” for qtr panels
• Corners are tapered with a 12” radius
at the top and a 6” radius at the bottom
• Quarter panels are canted out 7
degrees.
• Ships in three pieces for savings on
shipping and Installation
RD2600 Uni Rear Cab Cover
$199set
We offer our own line of Seats for your `28-`34
Rod. Sized and Priced Right, these seats
arrive to you precovered, ready to install right
out of the box. Options include Seat Heaters,
Embroidery, Map Pockets and Armrests with
Cup Holders. If you want to two-tone the seat
there will never be an upcharge.
BUCKET SEATS
RD2610 Uni Cab Corners
(Sides only)
$169set
Corners can be used to build quarter
panels, headliner sides, trunk panels or
Model A rear headliner/quarter panels.
Let your imagination soar.
SOUND INSULATOR
Pinched Seats are narrowed on the outside of
each Bucket or Bench. This exclusive feature
allows the seats to not only conform to many
early cars that have extremely narrowed bodies but also allows the seat to travel further on
the tracks, making the car fit better for those
couples with dramatic height differences.
All seats can be shipped UPS Ground, saving
you hundreds of dollars over truck charges.
RD-HSI Black 22” x 22” sheet
$20/sht
CARPET-RODDER KITS
ACC-15125 CUTPILE
Coupe-Roadster Kit
$189
ACC-15126 80/20 LOOP
Coupe-Roadster Kit
$189
ACC-15127 ESSEX CUT PILE
Coupe-Roadster Kit
$378
ACC-15128 DAYTONA WEAVE
Coupe-Roadster Kit
$375
See page 9 and 10 for color choices
`32 FORD COUPE
UNDERDASH
Other Models and Pricing is
Available on Pages 13-15
Fits under existing dash extending down
and wrapping under back to firewall. Both
the front and under surfaces provide
considerable space for gauges, switches,
stereo equipment, hide-a-vents, hide-agauges (shown} and air conditioning.
RD2020 Contoured Underdash $149
STEERING COLUMN
COVER
Another fast, easy and clean way to
hide wires along steering columns.
INCLUDED IN KIT:
Column Cover with
two galvanized
brackets.
Length: 32" long
Depth: 9" deep
Diameter: tapers
from 2-3/4"-4" to fit the various
column drops.
RD2004 Steering Column Cover
$89
CENTER CONSOLES
Cent e r
Consoles
come with
either a shifter
boot or a coin
holder and are
available with 1, 2
or no cup holders. Made of ABS, it
can be easily trimmed down from
its original length of 33” and height
of 9”. The con sole has room for
mounting power window switches
or gauges on the top of the unit.
RD4001
$99
RD4000
$99
RD4003
$99
RD4006
No cup, w/change tray
No cup w/boot in Black
Ultraleather
1 cup w/boot in Black
Ultraleather
2 cup w/boot in Black
Ultraleather
UNDERDASH EXTENSION
OR WIPER COVER
Use our Underdash Extension when you
can’t or don’t want to cover the entire
underside of your dash. You can cut
openings for radios, a/c vents, switches,
gauges and controls.
Or, use this kit as a Wiper Cover. It’s
easily trimmed to fit above the Model A’s
window and below the headliner. Cut
openings for a package tray, radio mount,
gauges or extra switches.
RD2000 Under/Wiper Cover,
Trimmable
$99
TIP
S
Here are two cars with the Panels carrying thru from the front
panel to the rear. The car on
the left used “The Shake Rattle
& Roll” panel design, while the
car on the right used flat stock
and two toning techniques
to achieve the look, inserting
“Pimento” armrests in the front
and rear panels.
19
MODEL A THRU `34 FORD COUPES AND SEDANS
THE MUSHU
DUAL LOCKtm TABS
COUPES AND SEDANS
HEADLINERS
32w x 44h*
WEATHERSTRIPPING KITS
A One piece Headliner with quarter
panels is available. Molded in ABS plastic,
smooth, no design (insulation included).
Due to variations between models some
trimming may be required. This is the way
to get that raduised curves in the rear and
above the door.
23” Design
DESIGN: WING KNUT
RD1003 16 pieces for kick
Panels
RD1004 30 pieces for
Two doors
RD2533 Mushu
$199/pr
More panels are available on Page17-18
DECK LID LINERS
$20/pkg
$30/pkg
SPRAY GLUE CHEESE
Shown with optional V8 die-cut
Foam, sold separately
RodDoors trunk deck lids are
pre-trimmed, ready to cover and
press in place using the Dual Lock
TM
tabs included in the kit. Early
Ford versions fit steel and some
fiberglass deck lids.
RD3800
RD3801
RD3802
RD3803
`28-`29 Ford
`30-`31 Ford
`32 Ford
`33-`34 Ford
$189
$189
$189
$189
RD3702 Pretrimmed for New Age
`32 5 Coupe
$379
RD3710 Untrimmed for `32
3 or 5 win Coupe
$379
RD3712 Untrimmed `30-`34
Headliner Coupe
$379
Headliner , Coupes w/ Wiper
Extention
$425
Headliner Model A/ Victoria
Sedans
$479
Headliner Model A/ Victoria
Sedans w/ Wiper
Extention
$525
Doc Panelstein’s favorite:
2 cans for a truck, 4 cans
for a sedan to glue fabric
to panels, headliners and
kicks. Adheres to wood,
plastic or metal.
RD1007
Upholstery Clips
“NEW AGE” `32 INTERIORS
NOTE: Panels are trim-to-fit;
RD3700 `32 Deck lid Liner
$189
RD3701 `32 Rear Cab Cover
$199
RD3702 `32 Headliner with
Quarter Panels
$379
RD3703 `32 Kick Panels
$79/pr
RD3704 `32 Flat Door Panels,
Pretrimmed
$179/pr
RD3705 `32 Mushu Door Panels,
Pretrimmed
$219/pr
RD3706 `32 Trunk Kit, incl. Deck Lid$359
RD3707 `32 Firewall Insulator
$179
RD3709 New Age (only) Trunk Kit $199
RD3710 Coupe Headliner,
Untrimmed
$379
Shown Above- Gauges installed
directly into the `32 Headliner.
$18
CLIPS
Application and Universal
Weatherstripping Kits
Carpet Clips
RD1000 Carpet clips, 12/pkg $10/pkg
TRUNK KITS
RD3802 `32 Deck Lid Liner
$189
RD3803 `33-`34 Deck Lid Liner
$189
RD3708 Universal Trunk Kit `28-`34 $199
RD3709 New Age (only) Trunk Kit $199
NOTE; Trunk Kit Panels are Trim-to-Fit
Color Combo acc
SEAT: Ultraleather,® Capri
This cool `33 door is dressed up in “The
Bobeck” Universal Door Panel with armrest, more styles on page 18.
20
Soffseal weatherstripping provides
the best, and most complete kits to
keep out and reduce N.V.H. (Noise,
vibration, harshness). We choose
to feature their products as another key need for any builder or
Hobbyist. Each Kit is versatile, easy
to install, and all the parts necessary
to finish the seals in your street rod
are included. These kits have either a
specific application or a universal kit
can be ordered, more model specific
kit listings are available on our web
site, or call us today for your specific
model.
32 STREET ROD 3 WINDOW COUPE
STEEL BODY, ORIGINAL FORD BODY W/
STRIP KIT, 2 DOORS, 1 TRUNK, SIDES
AND TOP, 1 TRUNK BOTTOM, 1 HOOD
TO COWL, 1 HOOD TO SHELL
SRS2000
$120
33-34 FORD 3 AND 5 WINDOW COUPE,
ORIGINAL FORD BODY W/STRIP KIT, 1
HOOD TO SHELL, 1 HOOD TO COWL, 2
DOORS, 1 TRUNK, 1 TRUNK BOTTOM
KIT
SRS2004
$147
UNIVERAL FIT STREET ROD AND CUSTOM STREET ROD BUMPER BOX (50
PIECES 5 OF EACH BUMPER K102, K103,
K121, K124, K162, K183, K188, K190,
K191, K192)
SRBOX
$31
`48-`53 FORD TRUCK PRETRIMMED DOOR PANELS
THE MCMAHON
THE NORTON
DESIGN: SID CHAVERS
DESIGN: SID CHAVERS
1953 - 1955
1948 - 1952
KICK PANELS
RD3222
`53-`55 REAR CAB COVER
DOOR PANELS
DOOR PANELS
RD3220 With built-in armrest
$189/pr
$69/pr
HEADLINER
RD3224 With side panels, smooth $199
FIREWALL INSULATOR
RD3203 Smooth panel,
no armrest
RD3201 With design,
no armrest
RD3202 Smooth panel,
with armrest
RD3200 With design and
armrest
$189/pr
$189/pr
FIREWALL INSULATOR
$179
REAR CAB COVER
RD3226 Rear Cab Cover, smooth $199
CARPET KITS
ACC-16280 `48-`52 Ford Truck 2 W Drive
w/o Gas Tank, 80/20 or Cut Pile
$255
in Essex Cut Pile add
$128
Regular Cab Carpet Full Floor Without Gas Tank
HEADLINER
1953 - 1955
$199/pr
KICK PANELS
RD3232 Smooth, no holes
Rear Cab Cover for `53-`55 trucks
RD3213 Original, with design
$199
RD3214 Original, smooth
$199
RD3215 Rubberless, with design $199
RD3216 Rubberless, smooth
$199
$199/pr
RD3206 Kick panels, no design $69/pr
RD3205 Kick panels, with design $69/pr
RD3207 Smooth, no holes
$179
OVERHEAD CONSOLE
RD3217 `53-`55
Three piece design in ABS plastic
With matching design (insulation
included).
Required rubber headliner-to-roof seal
included with each headliner
RD3210 `53-`55 orig. Style, smooth,
seal included
$229
RD3208 `53-`55 orig. Style, w/design,
seal included
$229
RD3209 `53-`55 rubberless,
smooth (ORDER THIS ONE)$199
RD3211Headliner-to-Roof
seal w/clips
$29
DOOR STORAGE POCKET
Two-Toned Door Panel Required only an
additional yard of fabric to achiece this
look. Panel was cut apart, the individual
pieces were then covered seperately. it
was all put back together with Upholstery
Clips (see page 34).
CARPET KITS
$99
RodDoors reintroduces the Door Storage Pocket. The Pocket recesses into
the access plate on the door of `53-`56
Ford trucks. Installed before the door
panel it gives you a storage area in each
door. Sold each.
RD8515 `53-`56 Storage Pocket $79ea.
One piece Rubberless Headliner with
RodFoam used to make the Flame pattern (see page 34 for more info).
ACC-16281 `53-`55 Ford Truck 2 W Drive
w/o Gas Tank, 80/20 or Cut Pile
$255
$128
The owner of this truck chose to use
our Flame ll Trim to Fit Panel. There was
enough extra Panel to cover the Kick
Panels also for a flow-thru design.
For this `28 Ford truck the owner chose to
use our Headliner and flat stock for door
panels and underdash cover. This is a
great install. Much time has been devoted
to customizing what we send in our kits
with foam to add that “Extra” dimension.
If you’ve watched our DVD you may recognize this cab as the one we used in the
background when we were filming. A two
birds one stone sort of thing, as we were
filming we were also making templates
so that the fit will be perfect.
One piece headliner
Installed in a `48 Ford F1
21
`56 FORD TRUCK PRETRIMMED DOOR PANELS
THE SHAFFER
DESIGN: SID CHAVERS
1956
Smooth panel, no armrest
With design, no armrest
Smooth panel, with armrest
With design and armrest
$189
$189
$199
$199
KICK PANELS
RD3265 Smooth
RD3264 W/design
`56 REAR CAB COVERS
`56 FORD HEADLINERS
Designed to fill in the area behind the seat
after the Gas Tank has been removed. If
Gas tank is to remain in the truck, please
order the `56 Ford GasTank Cover listed
below.
RD3266 Orig, big wind., w/design & seal $229
RD3267 Orig, big wind., smooth & seal $229
RD3274 Rubberless, big wind.,
RD3269Orig,sm window, w/design & seal$229
RD3270 Orig, sm window, smooth & seal$229
RD3271 Rubberless, sm wind.,
FIREWALL INSULATOR
DOOR PANELS
RD3263
RD3260
RD3262
RD3261
$69
$69
RD3093 `56 Ford Truck Firewall Insul
No holes
$179
CARPET KITS
ACC-16281 `56 Ford Truck 2 W Drive w/o
Gas Tank, 80/20 or Cut Pile
$255
$128
OVERHEAD CONSOLE
RD3218 `56 Small window
RD3219 `56 Big window
$99
$99
DOOR STORAGE POCKET
RodDoors reintroduces the Door Storage Pocket. The Pocket recesses into the
access plate on the door of `53-`56 Ford
trucks. installed before the door panel
it gives you a storage area in each door.
Sold each.
RD8515 `53-`56 Storage Pocket $79ea.
RD3278 Rubberless, sm window,
smooth
$199
RD3281Rubberless, sm window, w/
design
$199
RD3276 Original, sm window,
smooth
$199
RD3273 Original, sm window,
w/design
$199
smooth
$199
w/design
$199
RD3280 Original, big wind.,
smooth
$199
RD3277 Original, big wind.,
w/design
$199
NOTE: Original Rear Cab Covers must
be used in conjunction with an Original
Headliner which includes the rubber
seal necessary to complete this installation.
`56 FORD GAS TANK COVER
RD3283 56 Gas Tank Cover
Color Combo rrc
CARPET: Cut Pile, Flame Red
SEAT: Ultraleather,® Red
Flame ll Universal Panels on page 17
Jalapeno Armrests on page 5
22
$199
`57-`79 FORD PRETRIMMED DOOR PANELS
THE CAMERINO
THE HUGO
THE LUPE
`73- `79
DESIGN: BOB FENDER
DESIGN: BOB FENDER
DESIGN: BOB FENDER
1961-1966
1967-1972
DESIGN: RODDOORS
1957-1960
DOOR PANELS
DOOR PANELS
DOOR PANELS
DOOR PANELS
RD3001 With design & armrest $199/pr
RD3002 With design no armrest$189/pr
RD3120 With design & armrest $199/pr
RD3121 With design no armrest$189/pr
RD3180 Smooth with armrest $199/pr
RD3181 Smooth no armrest $189/pr
RD3151 Door panels,
$249/pr
Designed to use Original Door Handles.
KICK PANELS
4 decrorative finishes, Koa, Walnut,Carbon
Fiber-Black/Red of Armrests
$189/pr
KICK PANELS
KICK PANELS
RD3005 W/design
$69/pr
HEADLINER W/QTR PANELS
RD3004 Small window (smooth) $199
RD3003 Big window, no Quarter Panels
(smooth)
$199
REAR CAB COVER
RD3006 Smooth, no tank
RD3007 Smooth, with tank
$199
$199
DEFROSTER Ducts
RD3000 `57-`60 Defroster Ducts $89/pr
FIREWALL INSULATORS
RD3123 For `61-`64 unibody
$69/pr
RD3124 For `61-`66 standard cab$69/pr
RD3183 Smooth
HEADLINER W/QTR PANELS
RD3185 Smooth
RD3126
RD3125
RD3127
RD3128
`61-`64 sm window, uni
`61-`64 big window, uni
`61-`64 standard cab
`65-`66 standard cab
$69/pr
KICK PANELS
HEADLINER
$199
$199
$199
$199
$189
RD3152 Kick panels, smooth
$199
$199
RD3153 Headliner, smooth
RD3154 Headliner, chrome
trim required
$69/pr
HEADLINER
REAR CAB COVER
RD3190 Smooth, no tank
RD3191 Smooth, with tank
DASH PANELS
REAR CAB COVER
RD3130 `61-`64 unibody no tank,
small window
RD3131 `61-`64 unibody w/tank,
small window
RD3132 `61-`64 unibody no tank,
big window
RD3133 `61-`64 unibody w/tank,
big window
RD3134 `61-`66 standard no tank
RD3135 `61-`66 standard w/tank
1973-1979
$199
$199
REAR CAB COVER
RD3155 Rear cab cover
199
SPEAKER INSERTS
$199
$199
6-gauge ABS housing,
engine turned stainless steel, panel
only
HAN-HLFT67/72 Dash Insert
$180
$199
$199
$199
$199
RD-3156 Speaker insert
$89/pr
RD-3157 Speaker insert, flange $89/pr
`57-`79 CARPET KITS
A RodDoors exclusive- A Full Dash Insert
for `61-`66 Ford Trucks 6-gauge ABS
housing, Billet Aluminium , panel onlyRD5014 Full dash `61-`66 Ford T $259
ACC-16283 `57-`60 Ford Truck, Without
Gas Tank 80/20 or Cut Pile
$232
$116
ACC-1506 `61-`64 Ford Truck
80/20 or Cut Pile
$232
In Essex Cut Pile add
$116
ACC-2252 `65-`79 Ford Truck 2 W drive
With Cutouts, 80/20 or Cut Pile $232
$116
Regular Cab Carpet Full Floor Without
Gas Tank See page 9 and 10 for color
choices
For this truck the owner chose to use our “HUGO”
model. The armrest is already trimmed in the
panel. They also decided to use the contrasting
fabric on the insert panel. The headliner is available in a molded one piece ABS plastic panel that
saves time on installation and gives a cleaner
look and fit over the four piece “Lemon wedge’”
look original.
The “LUPE” model. With this model you can use
the original door pull in the armrest. The builder
went with power windows operated at the center
console for a real clean look. Two toning the
panel to match the seat is another simple but
clean way to go.
DASH PANELS
RD3017 No holes- `57-`60 Ford T $179
RD3122 No holes- `61-`64 Ford T $179
RD3137 No holes- `65-`66 Ford T $179
RD3187 No holes- `67-`72 Ford T $179
23
`47-`55* CHEVY TRUCK PRETRIMMED DOOR PANELS
THE EUREKA
THE QUINN
DESIGN: RON MANGUS
DESIGN: THE UNKNOWN UPHOLSTERER
1947 - 1955*
DOOR PANELS
RD3080 With built-in armrest
$189/pr
ORIGINAL DOOR PANELS
RD3082 ORI- fits into Chrome Molding
(not included)
$49/pr
KICK PANELS
RD3083
$69/pr
HEADLINERS
Smooth
Smooth
RD3087 `54-`55* first series,
Round window, smooth
OVERSIZED HEADLINERS
FOR CUSTOM APPLICATIONS
$189
$189
$189
Smooth
$189
Quinn Design
$189
RD3096 `54-`55* first series rnd win
W/clips, Smooth
$189
REAR CAB COVERS
Quinn Design
RD3089 `49-`53 window - Quinn
RD3090 `47-`48 No Tank
Smooth
RD3091 `49-`55 No Tank
Smooth
RD3092 `47-`55* first series,
Smooth, Gas Tank Cover
The Cleanest look. No Rubber windlace,
no back support brace, not a problem!
Fits great, and does what many want
to do.
1947 - 1955*
Shown here with optional
Rich Santana designed
Deco Shapes add-on.
DOOR PANELS
RD3242 Quinn-No armrest
$189/pr
RD3241 Quinn-With armrest $199/pr
RD3240 Quinn-Warm & deco
Shape
$249/pr
RD3099 Deco shapes add
$59/pr
FIREWALL INSULATORS
$189
$189
$199
$199
RD3093 Firewall Insul 47-55 No holes
$199
We sell more gas tank covers to those
that have taken the tank out. The Tank
Cover has a built-in package shelf, you
can hide those giant speakers in it if neccesary and by adding an access plate it
makes a great location for mounting that
OVERHEAD CONSOLE
RD3097 `54-`55* first series rnd win
w/Deco Cutouts and Inserts $189
Shown Above with Hawiian Koa Wood
Grain Deco inserts
RD5050 Deco Inserts- Koa Wood $189pr
* Early 1955 Model
$179
Shown here with optional Pimento
Armrest (Panel not pretrimmed
for armrest cutout)
CARPET KITS
RD4020 Trim to Fit Overhead Console
Color Combo traa
CARPET: Cut Pile, Torch Red
SEAT: Ultraleather,® Arctic
INSERT: Ultrasuede,® Arctic
Builder Dennis Quinn with this custom stretched `48 Chevrolet Extend Cab. Dennis used two of our molded
headliners glued together to make his own custom headliner.
24
$79
ACC-16279 80/20 or Cut Pile
$232
$116
Gas Tank see page 9 and 10 for color
choices
CHEVROLET TRUCK PRETRIMMED DOOR PANELS
`55 **-`59 Chevrolet
THE KOBI
`60-`63 Chevrolet
`64-`66 Chevrolet
THE KATO
THE FENNIMAN
FIREWALL INSULATORS
RD3177 ABS Molded No holes, with
Aluminium Pad
$179
LATCH COVER PLATES
DESIGN: RON MANGUS
1960 - 1963
1964 - 1966
DOOR PANELS
DOOR PANELS
RD3140 With built-in armrest $199/pr
DOOR PANELS
KICK PANELS
RD3163 No vent hole
RD3164 With vent hole
$69/pr
$69/pr
HEADLINER
RD3166 Smooth
RD3165 With design
DESIGN: DOC FROHMADER
DESIGN: DOC FROHMADER
1955** - 1959
$189
$189
REAR CAB COVER
RD3171 With tank
$199
RD3170 No tank
$199
Note: small or big back window fit the
same
Here is an important item. The original
access plate on the `55-`59 Chevrolet
truck holds the door panel off the door
too far, so you’ve got to remove it to get
the door panel to fit flush to the door. But
this panel also covers the latch on the end
of the door. Sure you can just cut off the
panel if you like and use the end of the
access plate. Or you can use our Latch
Cover Plates. They fit better than originals,
are made from thicker material, and can
be easily chromed.
KICK PANELS
KICK PANELS
RD3142 Kick Panels,60-63,
$69/pr
$69/pr
HEADLINER
HEADLINER
RD3144 Headliner,60-66,
RD3105 Kick Panels,`64-`66,
$189
RD3144 Headliner,`60-`66,
$189
REAR CAB COVER
REAR CAB COVER
RD3175 18 gauge steel
(Recommended)
$79/pr
RD3176 Same as above, no holes,
`55-`66 CARPET KITS
ACC-16282 `55-`59 Chevy Truck,Without
$232
$116
ACC-1248 `60-`66 Chevy Truck,Without
$232
$116
Gas Tank see page 9 and 10 for color
choices
RD3146 Rear Cab Cover,60-66,
$199
FIREWALL INSULATORS
RD3147 Firewall Insulator-60-63,
No holes
$179
RD3146 Rear Cab Cover,`60-`66,
$199
FIREWALL INSULATORS
RD3149 Firewall Insulator-64-66,
No holes
$179
** Late 1955 Model
To the Left- A custom Door Panel that uses our
“Chipotle” armrest with a hand carved wooden
burl armrest cap. The fit and finish was great and
we were wowed with the custom stainless steel
trim used on the lower panel. Great Job!
To the Right-A stock RodDoors covering for a `64
Chevrolet Truck, but not a stock look. RodDoors
proves that Custom Interiors do not have to be
either expensive or labor intensive. Let us help you
get through the entire process.
Fitting the Rear quarter panels on a `68
Chevrolet Suburban.
25
CHEVY TRUCK PRETRIMMED DOOR PANELS
`67-`72 Chevrolet & Suburban
THE DANO
DESIGN: THOM TAYLOR
1967 - 1972
DOOR PANELS
RD3041 W/ Hungarian armrest $199/pr
KICK PANELS
RD3042 Kick Panels,`67-`72,
$69/pr
HEADLINER
HEADLINER MOUNT
SPEAKER PODS
Now here is a
Trick item.
Speakers in
Trucks have
always been
A pain. Lots of sheet metal
Cutting, leaving very permanent holes.
We’ve tried to help with these Pods,
mounted in the upper outside back corners of the cab. They are out of the way
and nearly out of site. These pods are
precut to fit directly to the cab contours
and mount with only a couple of screws.
Speaker wires are hidden between the
inner and outer cab sheet metal. More
Speaker Pod are listed on page 37.
`73-`87 Chevrolet
`67-`72 SUBURBAN PARTS
We now have a five-piece replacement
headliner for your Suburban.
RD3049 Headliner 6772 Sub
$ 650
RD3041 Door Panels
$199/pr
RD3042 Kick panels
$ 69/pr
RD3050 Rear Door 67-72 Sub $249/pr
RD3051Qtr Panels 67-72 Sub $279/pr
`67-`72 BLAZER QUARTER PANELS
RD3044 Headliner,`67-`72,
$189
REAR CAB COVER
RD3045 R C Cover`67`72 Tank Out $199
PILLAR COVERS
ACC-14046 `67-`72 Chevy Blazer
2 Wheel Drive, Automatic, Complete
(Passenger Area, Back Panel and
Wheel Wells)
80/20 or Cut Pile
$387
$194
ACC-1895 `67-`72 Chevy Suburban
(2PC Passenger Area, Back Panel and
Gas Tank Neck Cover)
80/20 or Cut Pile
$564
$282
Never Available till now. What should
FIREWALL INSULATORS
have been stock and was offered on every
RD3053 Firewall In.`67-`72Noholes $179
truck since, is now offered to you in two
versions; either with “Blow-Out Proof”
tweeters or smooth . It’s your choice.
RD3048 Pillar Covers, No tweet $39/pr
RD3047 Pillar Covers, With tweet $79/pr
RD-VIDEO
RD-DVD
$249/pr
$249/pr
RD3043 Blazer Qtr Panels 67`72 $259/pr
`73-`87 CARPET KITS
ACC-2692 `73 Chevy Truck 2 w Drive
80/20 or Cut Pile
$196
$98
ACC-8243 `74-`80 Chevy Truck 2 w Drive
80/20 or Cut Pile
$196
$98
ACC-2711 `81-`87 Chevy Truck 2 w Drive
80/20 or Cut Pile
$182
$91
Wheel Wells)
80/20 or Cut Pile
$373
$186
Wheel Wells)
80/20 or Cut Pile
$373
$186
Color Combo rbb
$15
$15
1973 - 1987
DOOR PANELS
LOWER KICK PANEL
SPEAKER PODS
SECRETS REVEALED!
Dr. Panelstein sez, “Finally, the inside
dirt on how to cut, cover and tame
that wild interior you want to do!”
Included are our not-so-secret techniques on cutting, carving, forming
and installing RodDoors Interior
Plastic Panels. Using only a pair of pliers, a propane torch, a utility knife, a
sanding block, and glue, you too can
create a big-buck looking interior for
your rod in no time!
DESIGN: TODD EMMONS
RD3060 `73-`79 with armrest
RD3063 `80-`87 with armrest
`67-`72 CARPET KITS
ACC-1894 `67-`72 Chevy Truck
Without Gas Tank
80/20 or Cut Pile
$196
$98
THE EMMONS
CARPET: Gross Point, Red
SEAT: Ultraleather,® Brick
INSERT: Ultraleather,® Buff
$15
VHS or
DVD
26
Speaker panels are made for `73-`87
Chevrolet 1/2 Ton Truck CHEYENNE
Model Kick panels. Will Fit up to a 6-1/2”
speaker.
RD3061 Half KickPanel-73-87
$89/pr
Speaker inserts are made for `73-`91
SILVERADO, 3/4 Ton, 1 Ton, Blazer, and
Suburban Model Kick panels. Will Fit up
to a 6-1/2” speaker.
RD3069 Kick Panel Insert-80-87 $89/pr
HEADLINER
RD3062 Replacement 73-87
$189
REAR CAB COVER
RD3065 Rear Cab Cover-73-87
$199
FIREWALL INSULATORS
RD3067 Firewall In-73-87, No holes
$179
`5 5 -`5 7 CHEVY SEDANS & WAGONS
DECK LID COVER
THE CYPRESS
SEATS
These well-built seats are ready to
bolt to your original track or our
optional risers.
RD3310 Deck Lid 55-57 Fits sedan
& hardtop
DESIGN: RON MANGUS
THE VENTURA
$189
TRUNK KIT
1955 - 1957
RD3311 Fits `55-`57 sedan ONLY
RD3020 Cypress sedan/wagon $189/pr
RD3300 Ventura sedan/wagon $189/pr
RD3313 Smooth/ No Design Door Panel
No Armrest
$189/pr
Complete package including
Deck Lid and Trunk Kit.
$389
$69/pr
$69/pr
CARPET KITS
$99/pr
ACC-14085 55,56,57- 2 or 4 door
Sedan molded-80/20 or Cut Pile $220
$110
$99/pr
ACC-4503 55,56,57 2 door Sedan Bench Seat
Cut and Sewn in Daytona Weave
$485
QUARTER PANELS
RD3306 Original style, wagon,
Smooth
RD3305 Original style, sedans,
Smooth
$199
TRUNK PACKAGE
RD3312 Fits `55-`57 sedan
KICK PANELS
RD3302 Fits `55-`56, smooth
RD3303 Fits `57, smooth
There are two ways to buy these
seats — Covered or Uncovered. Uncovered seats include pre-trimmed
foam. We offer our patterns for your
trim shop to go by.
Buy them covered and we can put
your upholstery together in any
combination you desire, all tweed,
all vinyl or Ultraleather® or you can
create two-tone combinations from
the available materials. You tell us
what you want and we’ll do it, just
so long as it fits the basic designs
shown on these pages.
DESIGN: RON MANGUS
DOOR PANELS
Rear
2-DR
Sedan
REARseat
SEAT
2-DR
SEDAN
For color consistency in your interior,
order all your seat and interior panel
fabric at the same time to ensure the
same dye lot. We’ll ship your panel
fabric after pulling the amount required for your seats, or we’ll send it
all together with your finished seat.
It’s your call.
Want a custom look for the rear seat
of your `55, `56 or `57 Chevy 2-Door
Sedan? Try our newly designed seat
and quarter panels for a fantastic
custom finished look. We’ve even
added generous width armrests!
The design of the quarter panels
allowed us to square off the seat to
create a matching look to the front
seat. The finished look is awesome!
This car features many of our products
and was installed by RodDoors Authorized
Installer -Reeds Early Iron. Each RodDoors
Seat was custom embroidered black on black
Ultraleather, for one of the most “Sinister
Cool” looks we’ve seen in a long time. To
the left is a center console with shift boot.
To the right are pictures of the rear seat in
this `55, and close-ups of the embroidery
on the buckets.
27
`5 5 -`5 7 CHEVY SEDANS & WAGONS
SEATS
HANELINE GAUGES
Designed to fit the stock position
of `55-`57 Chevys, all come with
Sending units.
REAR SEAT
UNCOVERED FRAME
Frame w/foam
FRONT SEAT
The Bidwell, Burney, Lassen, Sutter
model for your front seat is offered
in a split-back style, or you can use
buckets.
$1295
COVERED SEAT
Includes frame, foam and upholstery of your
choice, prices shown below are suggested retail.
$1,595
$1,695
$1,795
Ultraleather® outer and inset
1955 - 1956
Two gauge billet panel with
Indicator lights
HAN-HLC55/56BP Panel only
$175
HAN-HLC55/56BP3202 Panel w/Elite
Speedo-Quad
$625
REAR QUARTER PANEL
PACKAGE
Package includes quarter panels with armrests, package tray and seat riser cover.
RD3308 For Sedan only, Hardtop
trimmable
UNCOVERED FRAME
Solid-Back Frame w/foam
Split-Back Frame w/foam
$359
PACKAGE TRAY
$1095
$1,295
RD3009 Package tray
$169
REMOVABLE ARMREST
1955 - 1956
Three gauge engine turned stainless steel
facia
w/
indicator lights - fits into stock housing
HAN-HLC55/56-1 Panel only
$175
COVERED SEAT
Includes frame, foam and upholstery of
your choice, prices shown below are suggested retail.
SPLIT-BACK STYLE
$1,695
$1,795
$1,795
Ultraleather® outer and inset
Ultraleather® outer and Suede inset $1,995
Ultrasuede® Insert
Ultrasuede® outer,
Ultrasuede® Insert
$1,895
$1,995
The removable armrest works specifically
with RodDoors front seats. The two wide
fabric straps fore and aft wrap down the
front and back of the seat and attach with
Velcro® to the seat frame. With little effort,
this comfortable armrest can be installed
or removed. This is a better solution for a
center passenger, no fold-down armrest to
lean against!
RD6091 Armrest with cup holder
$149
RD6092 Armrest without cup holder $129
Color Combo goe
CARPET: Daytona Weave, Light Green
SEAT: Ultraleather,® Orchard
INSERT: Ultraleather,® Eucalyptus
This car uses both our Center Console and
Vertical Console in combination. This was
possible because you can turn the console
around and run it toward the firewall.
28
1957
Three gauge replacement only. Shown w/5”
Teleflex electric speedo, two 2” Westach duals with senders. Fits into stock housing
HAN-HLC57 Replacement Gauges
$660
CAMARO 1967-1969 FIRST GENERATION
FIRST GENERATION
CAMARO
America’s love affair with the `67-`69
Camaro is one that has endured.
It’s “THAT CAR” you never had or
maybe the one that got away. Now
that you can relive that ride.
In its original form, it all appears a
little dated. The aftermarket has responded and now provides so many
upgraded and reproduction parts
that you can build a First Generation
Camaro totally from new parts.
KICK PANELS
RD7408 `67,`68,`69- Kick Panels,
All Models
$89/pr
Wow! If you want good sound you
need to have the speakers at ear
level, or at least aimed that way.
This set solves that and many other
unforeseen problems with vents, AC,
etc. Best of all when installed you can
still use your Emergency Brake and
hi/low beam switch.
DECK LID COVER
RD7400 `67`68`69- All Models $189
When we started on the `67-`69
Camaro we set out to develop an
interior that would be an upgrade
that incorporated many of the
features now common in modern
road mobiles.
We think we exceeded our best
intentions. The look is clean, the line
are modern yet pay tribute to the
original. Better still, this interior can
also be easily customized by the average enthusiast. Our goal to offer
everything for your ride that wasn’t
available then, but should have
been has been accomplished. Pick
out one product to try, or order the
complete kit. We know you’ll save
time and lots of money. And best of
all it won’t look like anyone else.
DOOR PANELS
HEADLINER
DESIGN: RodDoors
1967 - 1969 Camaro
RD7412 `67 Door PanelsAll Models
$269/pr
RD7402 68-`69 Door Panels,
All Models
$269/pr
Included with each set are Armrest
Inserts along with two-tone able decorative Inserts. Also included are metal door
panel supports for `68-`69 models.
RD7405 `67`68`69- Headliner,
Coupe
$379
Hard formed Headliner with Console
and third brake light built-in (7 piece
kit includes sail panels)
DECO INSERTS
RD7419 Turn Signal Third
Brake Light
$20
RD7409 `67`68`69- Headliner,
Coupe
$379
Hard formed Headliner with flat
Center (7 piece kit includes sail panels)
CENTER CONSOLE
RD5090 Deco Inserts KOA
$189/pr
RD5091 Deco Inserts WALNUT $189/pr
RD5092 Deco BLACK CARBON $189/pr
RD5093 Deco RED CARBON
$189/pr
RD5094 Deco Qtr Insert KOA
$89/pr
RD5095 Deco Qtr Insert WALNUT$89/pr
RD5096 Deco Qtr BLK CARBON $89/pr
RD5097 Deco Qtr RED CARBON $89/pr
Camaro Door Panel with WALNUT
Finished Deco Insert Panel
DOORHENGE
RODDOOR FARMS
29
RD7406 `67,`68,`69All Models
$229
Shifter boot is shipped separately,
so as to ease positioning of console,
some trimming may be needed for
additional switches or gauges.
RODFOAM DINER
CAMARO 1967-1969 FIRST GENERATION
DECO COLORS
MOLDED CARPET
MOLDED TRUNK CARPET
A RodDoors Exclusive! Molded to fit
perfectly. A BIG improvement over
the original vinyl mat.
RD7401`67,`68,`69-All Models $189
RD7467 Molded Carpet-`67 All
Models 80/20 or Cut Pile
$279
$139
$279
$139
$279
$139
BLACK CARBON
RED CARBON
SEATS
HAWAIIAN KOA
WALNUT BURL
FRONT SEATS
Front Bucket Seats that bolt-in to the
original mounting holes. Seat slides
included for the proper positioning
of the seat. Back of bucket seat folds
both forward to allow the rear
Passenger to exit and back to allow
reclining.
RD6096 Bucket SeatsAll Models
$899ea
TRUNK KITS
Another great way to upgrade your
ride. Trunk Panels cover over a world
of sins. `67 and`68 trunk kits include
gas filler neck cover. Back of seat cover
included with every coupe kit.
RD7414 `67 Coupe w/gas
Filler cover
$279
RD7401 `68 Coupe w/gas
Filler cover
$279
RD7407 `69 Coupe
$279
RD7416 `67 Convertible w/gas
Filler cover
$279
RD7417 `68 Convertible w/gas
Filler cover
$279
RD7418 `69 Convertible
$279
REAR SEATS
COVERED SEAT
Includes frame, foam and upholstery of your choice, prices shown
below are suggested retail.
PACKAGE TRAY
RD7404 Package Tray`67,`68,`69
All Models
$179
An easy way to add speakers up to 8”,
into the package tray area. Also a great
cover for any holes that may have already
been cut into the tray. Includes to speaker
mounts with faux headrest caps for ease
of covering and two-toning if desired.
QUARTER PANELS
RD7413 Qtr Pan`67 Coupe
$279/pr
RD7403 Qtr Pan`68,`69 Coupe$279/pr
RD7419 Qtr Pan`67 Convert $279/pr
RD7410 Qtr Pan`68`69Convert$279/pr
RD7411 Center Rear Armrest,
All Models
$99ea
RD 7420 Center Console and Rear
Armrest
$299set
Color Combo ajp
TEE SHIRTS/ COVER ART
This is our retrospective catalog,
we decided to use a few cartoons
pened by Dave Deal, later printed
on Tee’s as “Affordable Art”.
SEAT: Ultraleather,® Juniper
INSERT: Ultraleather,® Putty
Get some of that high Class for your
self, get a shirt. Nothing will put
you in a better mood, or make your
teeth whiter than a cool Tee from
RodDoors.
RD-9021 RodDoors Farms L, XL, 2XL
RD-9041 RodFoam Diner L, XL, 2XL
RD-9031 Door Henge L, XL, 2XL
Specify size when ordering
$18
$18
$18
30
RD6095 Bench Back/ Bucket
Bottom, Coupe $1,795
RD6099 Bench Back/ Bucket
Bottom, Convert
$1,795
ACCESSORIZE YOUR INTERIOR
UNDERDASH COVER
32 FORD COUPE UNDERDASH
This clean, finished look hides dangling
wires and gives you more area for mounting A/C vents, climate controls, ignition
switches, and light accessories.
INCLUDED IN KITS:
The Underdash Cover is made of ABS
plastic in two sections, 16" wide on the
driver's side of the column and 44" wide
on the passenger's side.
Depth: 18" back from the dash to
the firewall.
Height: 6" front lip that can be
trimmed to fit the contour of the
dash or to allow for any gauges or
accessories below the dash.
An AC slide control plate pod. This allows
you to mount your slide control plate
into the cover and not have to cut the
dash itself. The pod also makes a great
place to locate all those extra switches
without cutting into the dash.
Four galvanized brackets that can be cut
with tin snips to give you the support
you need to complete the installation.
The 3/4" radius front lip is bent at a
120° angle that allows the Underdash
Cover to be bent down to cover any air
conditioning unit or accessories before
the front lip goes vertical.
KIT 1: `34 and older cars and trucks. Kit includes one 44” x 18” x6” section with brackets
and installation kit.
RD2006 Under Kit 1
$89
KIT 2: `35-`59 cars and trucks. Kit includes one
44” x 18” x 6” section, an additional 16” x 18”
x6” section for the driver’s side of the steering
column with brackets and installation kit.
RD2007 Under Kit 2
$99
KIT 3: `60 and newer cars and trucks. Kit
includes one 48” x 18” x 6” section, an additional 16” x 18” x 6” section for the driver’s
side of the steering column with brackets
and installation kit.
RD2008 Under Kit 3
$99
Fits under existing dash extending down
and wrapping under back to firewall. Both
the front and under surfaces provide considerable space for gauges, switches, stereo
equipment, hide-a-vents, hide-a-gauges
(shown} and air conditioning.
RD2020 Contoured Underdash
$149
UNDERDASH EXTENSION
OR WIPER COVER
KIT 4: Center Console Underdash Cover Kit
includes two 35” x 18” x 6” sections with
brackets and installation kit. This unit works
great if you are extending the console up
to meet the dash and need to finish off the
underside of the dash.
RD2009 Under Kit 4
$109
Use our Underdash Extension when you
can’t or don’t want to cover the entire
underside of your dash. You can cut
openings for radios, a/c vents, switches,
gauges and controls.
Or, use this kit as a Wiper Cover. It’s
easily trimmed to fit above the Model A’s
window and below the headliner. Cut
openings for a package tray, radio mount,
gauges or extra switches.
RD2000 Under/Wiper Cover,
Trimmable
FAQ
S
WON’T THE UNDERDASH COVER CUT OFF THE
RETURN AIR FOR THE AC?
Only 15 sq. Inches of opening is required to give you AC
unit all the air it can cool/heat. When trimming for fit the
underdash is first fit snug against the bottom of the dash,
kick panels, and firewall. Then decide where to find the
required air gap. We like to leaves a 1/2” gap along the back
against the firewall. It doesn’t have to be one opening, it
can be several. You could also drill 2” holes across the back
for a “Salt Flats” look. We’ve even seen louvers used, let you
imagination be your guide.
$99
MY AC UNIT HANGS DOWN TOO FAR?
Sometimes there is just no room to completely seal or
disguise the AC unit. In that case we work with the unit.
Letting the Underdash drop as far down as possible to
try and cover as much of the AC unit as possible. Cut the
Underdash around and up to the AC cover. Once the
underdash is covered mark the area on the AC unit that
will be exposed and cover that area with material.
mounted on the underdash, being aware of any possible obstructions and cut out the vent opening in the
Underdash. Press the vents in place attach the vent
hose and press the Underdash back in place.
WHAT IF I DON’T USE THE HIDE-A-VENTS?
No each unit is designed to be used either together
or independently. An example is if you were using a
Chrome Steering Column we do not recommend a
Column Cover. The same thing if you wanted to use
only the Steering Column Cover.
No problem. The front facia has a 6” drop that can
accommodate all available vents, regardless of make
or model. Position where you want to have the vents
31
DO I HAVE TO USE THE UNDERDASH, I ONLY NEED
THE COLUMN COVER?
HIDE-A-VENT
VERTICAL CONSOLE
GAUGE CLUSTER
HIDE-A-GAUGE
...Now you don’t!
OPEN
CLOSED
With Hide-A-Vents you cut out
the opening for the vents in the
Underdash Cover, preserving your
original dash. Follow our easy install instructions and your A/C and
heating vents make an appearance
only when the fan is on. When the
fan is off, they close flush with the
Underdash Cover.
Now you see it...
Works with our Floor Console
above or stand alone. Two side
panels included.
• Dimensions: 24”h x 4”w @ bottom,
9”w @ top
• Wide enough for standard DIN
mount radio
RD4010 Vertical Console-Smooth
MAP POCKETS
RD2100 Hide-A-Vent, 3” vent for
2” flex hose
$99ea.
RD2131 Solenoid and Relay Kit
For A/C w/defrost Unit
installed
$49/kit
RD2130 Solenoid only
$24ea.
One required
per set
$99
RD2001 3 gauge insert, 2-1/8” size $39
RD2002 3 gauge insert, 2-1/8”
size w/cap
$99
RD2110 Hide-A-Gauge,w/o gauges$279
HIDE-A-RADIO
RD2003 4 gauge insert, 2-1/8” size $39
...Now you don’t!
Our 13” and 23” pockets can be
installed on any RodDoors door
panel.
RD4041 13” map pocket
RD4042 23” map pocket
$49/ea
$59/ea
STEERING COLUMN COVER
Another fast, easy and clean way to
hide wires along steering columns.
INCLUDED IN KIT:
Column Cover with
Two galvanized
brackets.
Length: 32" long
Depth: 9" deep
Diameter: tapers
from 2-3/4"-4" to fit
the various column drops.
RD2004 Steering Column Cover
$89
Turning on the ignition reveals a
two-gauge cluster pod containing:
Speed om e ter, Fuel Level, Water
Temp, Oil Pressure and Voltage
levels. Keep the dash completely
clean or have an original looking
appearance. Fits our Universal
Under Dash Kit. Hide-A-Gauge can
be installed to open up or down!
Be creative!
These 3 and 4 gauge cluster mounts
are exclusively
from RodDoors.
Available as inserts only or with
a cap, gauges are
an gled to give
the driv er quick, clear read outs.
In serts can be mount ed into our
Underdash Cover, Dash Extension or
overhead Wiper Cover. You can also
mount directly into your existing dash
or into a custom center console.
Universal Kick
Panel Map Pocket can be cut to
fit most any kick
panel space.
RD4040 Kick Panel Map Pocket $49/ea
Now you see it...
Based on our Hide-A-Gauge, we’ve
swapped out the gauges for a DIN
mount radio. And like our Hide-AGauge, it is designed to fit into our
Universal Underdash kits. But don’t
let that limit your imagination! They
can be mounted most anywhere,
under the dash, sideways in a center
console, in Kick Panels, or as a drop
down from the headliner – the applications are many.
RD-2120 Radio not included
Shown mounted in Kick Panel, sold
separately
Color Combo ccc
HOW DO I USE THE MAP POCKETS?
HOW DO I FINISH A MAP POCKET?
Map pockets are made of black ABS plastic that must be
covered. You can use vinyl, Ultraleather®, Ultrasuede®
or leather. Just make sure it is stretchable. All RodDoors
fabrics meet this requirement (see pages 8-9).
Cut your material to allow 2”-3” beyond the overall
dimensions of the armrest. Fold the material in half,
starting at the center or over the armrest, spray both
10.5”
$279
3”
RD4721 Cuppy Holder
Designed to mount on our panels, map pockets come
in 3 sizes, 13”, 23” and a small 6” kick panel style. They
can mount in any number of positions; wherever you
have space.
CUPPY HOLDER
During the Cup Holder Wars of the
90’s you needed a “Bladder Buster”
rentention device to prevent a possible Johnstown Flood reenactment.
This is a survivor of those wars and
can be placed on any vertical panel,
Doors, Quarters,
Kick panels, all
make a great
spot for Cuppy.
CARPET: Cut Pile, Cranberry
SEAT: Ultraleather,® Chianti
INSERT: Ultraleather,® Champagne
The armrest and material with adhesive, let it tack up,
stretch the material over the map pocket and work your
way up and down and side to side, and then trim.
HOW DO THE MAP POCKETS ATTACH?
We recommend you cut a hole in the panel to match
the outer perimeter of the covered map pocket, slide it
in from the back and glue it along the edges with ABS
pipe cement. For added strength, cut some ABS strips
and glue them in place over the glued edge.
32
5.5”
$49ea.
GUMBO
DECK LID LINERS
CUP HOLDERS
UNIVERSAL REAR
CAB COVER
This vertical swing-away model is
very cool! Swing out, slide and flip
down. Real simple and real clean.
In brushed aluminum only.
1
FIRE EXTINGUISHER
2
3
Fits `28-`34 roadsters and many
other vehicles.
Shown with optional V8 die-cut
Foam, sold separately
RD4719 Vertical mount, double cup,
Cups included, brushed
aluminum
$130
RD4710 Horizontal mount, single cup
Cup included, brushed
aluminum
$69
RodDoors trunk Deck Lids are pretrimmed, ready to cover and press
in place using the Dual Lock TM tabs
included in the kit. Early Ford versions fit steel and some fiberglass
deck lids.
RD3800 `28-`29 Ford
$189
RD3801 `30-`31 Ford
$189
RD3802 `32 Ford
$189
RD3803 `33-`34 Ford
$189
RD3804 `39 Ford Coast-to Coast $189
RD3805 `40 Chevy Coupe
$189
RD3310 `55-`57 Chevy coupe
$189
RD7116 `64-1/2`66 Mustang Coupe$199
RD7117 `67-`68 Mustang Coupe $189
RD7118 64-1/2`66 Mustang Fast $189
RD7119 `67-`68 Mustang Fast
$189
RD7400 `67-`69 Camaro Gen 1
$189
RD7500 `70-`86 Camaro--soon $189
RD4712 Horizontal mount, double cup
cups included, brushed
aluminum
$125
RD4711 Vertical mount, single cup,
cup included, brushed
aluminum
$89
TIP
RD2610 Uni Cab Corners
(sides only)
Corners can be used to build quarter
panels, headliner sides, trunk panels or
Model A rear headliner/quarter panels.
Let your imagination soar.
Building a rod frequently is about solving problems. Installing a door panel with some power window converters can
be one such problem because the regulator can become an
SOUND INSULATOR
Aluminum Heat Shield
NOW WITH 11%
MORE- AT THE OLD PRICE!
RD3804 `39 Ford Coast-to Coast
Chrome 1LB fire extinguisher with recessed mounting plate. Can be installed
in kick, quarter or trunk panels. Looks
good and provides convenient extinguisher access.
RD-1008 Rechargeable soda
$99
RD-1011 With Halatron filled
extinguisher
$179
$169set
4.5’ x 6’ - 3/8” thickness with
aluminum one side;
Apply aluminum toward heat
RD1012 Heat Shield Pad
$29
S
Cut a mandrel out of
plywood the height
and diameter required. Cut another
piece of plywood
1-1/2” larger than the
mandrel.
• 32” tall x 58” wide x 18” for qtr panels
• Corners are tapered with a 12” radius
at the top and a 6” radius at the bottom
• Quarter panels are canted
out 7 degrees.
• Ships in three pieces for savings on
shipping and Installation
RD2600 Uni Rear Cab Cover
$199set
XMAS TREES, CHRYSLER
CLIPS OR TRIM PANEL
FASTENER CLIPS
What ever you want to call them,
Sometime you need a little more
support, and this is the trick. Each
box contains a dozen of the cutest
little time/ job-savers that you ever
did see.
RD1014 Trim Panel Clips
$189
obstacle. In some cases, the panel needs to be built up about an
inch to clear the regulator. What works best is to form a cavity
in the panel. The pictures and text below explain how to do it:
SAVE TIME, SAVE MONEY, SAVE WEIGHT.
Place the mandrel under the
panel where the regulator resides. Heat the panel with the
propane torch until the panel
becomes soft and pliable.
$6/box
This technique can be used for other solutions as well. Other
uses include: building out the kick panel for electronic fuel
controls mounted behind the kick panel. If this is your
situation follow the method used here, but wait to trim the
Press the plywood ring
piece down tight to
your work table. When
the plastic cools it
will retain the formed
shape.
33
$20/sht
GUMBO
RODFOAM
DUAL LOCK tm TABS
FLAT STOCK
Flat ABS panel kits are available for
OEM restorations or to create your
own look. You get the advantages
provided by the new, very durable,
water resistant materials and 3MTM
Dual Lock TM Reclosable Fastener Tab
mounting system. The 44” x 32” kit
will do two door or quarter panels;
the 22” x 32” kit will do kick panels.
Dual LockTM tape, carpet clips and
edge tape are included in all kits .
RD4501 2 Sht-door or Qtr Panels
44” x 32”
RD1003 16 pieces for kick panels $20/pk
RD1004 30 pieces for two doors $30/pk
SPRAY GLUE
CHEESE
Doc Panelstein’s favorite:
2 cans for a truck, 4 cans
for a sedan to glue fabric
to panels, headliners and kicks.
Adheres to wood, plastic or metal.
RD1007 Glue Cheese Dressing
$18
$99
RD4500 2 Sht-Kick Panels 22” x 32” $59
RD4507 1 Sht- door or Qtr Panels
44” x 32”
$60
RD4508 1 Sht-kick Panels 22” x 32” $35
RD4502 Full Sheet 48” x 70” - .090 $100
RD4503 Full Sheet 48” x 70” - .125 $110
CLIPS
Upholstery Clips
RD1000 Carpet clips 12/pkg
Carpet Clips
$10/pkg
RD1001Upholstery clips12/pkg $10/pkg
Full-Sheets can ship UPS
Use .090 for headliners
CLIPS?
EDGE TAPE
AC-EDGE TAPE 25 foot roll
$12roll
ABS Glue
“OOPS Glue” Used to glue
panels back together,
attach carpet clips and
upholstery tabs to panel backs, and
glue speaker pods and modular
armrest into panels.
RD1005 ABS Glue
$6
Something so easily overlooked, yet one of the greatest parts of
this system.
If you want to use two colors of fabric
on a panel. First decide where the colors
would meet. Mark that line and score and
break the panels apart.
Block sand the edges smooth and cover
the larger panel with fabric as directed.
Place the smaller panel up against the
larger panel uncovered and check for
fit.
You need a 1/16” gap all along the edge
Peel-And-Stick easy. Make unique
designs in door panels, headliners,
quarter panels, kick panels, package tray, and/or trunk panels. Use
wherever you need a softer feel
under fabric or leather. This highperformance closed cell foam has
an acrylic adhesive and easy to
remove liner.
RD4600 Arm rest pads,
1 piece 24” x 6”
$10
RD4610 Coupe kit, 1 sht 1/8” and
1 sht 1/4” foam 32” x 54”
$59
RD4611 Sedan kit, 2 sht 1/8” and 1 shts
1/4” foam 32” x 54”
$79
RD4612 Wagon kit, 3 sht 1/8” and
1 shts 1/4” foam 32” x 54”
$99
RD4615 1 sht 1/4” foam 32” x 54” $35
RD4616 1 sht 1/8” foam 32” x 54” $24
where the panels meet. (The 1/16” is the
thickness of the fabric folded behind the
panel.) If no gap exists you can easily
block sand the panel till you have an
even gap.
Then cover the insert panel as directed
with a contrasting colored fabric.
With the panels covered place the fabric
side down on a work bench, press the
panel pieces tight together and glue
the Upholstery Clips onto the back of
the panel with ABS plastic pipe cement.
Clips should be spaced 1” in from any
Color Combo rsc
CARPET: Gross Pointe, Red
SEAT: Ultraleather,® Sand
INSERT: Ultrasuede,® Clay
The panel to size until after you’ve formed the panel to
shape. Some shrinkage could occur during the forming
process that would make the panel no longer fit as good as
if you had trimmed it afterward.
PERFECT!
It’s that easy.
Other uses for this technique:
Package Tray with molded third brake light cover
Custom Automatic Shifter Boots
Seat Side Skirts
Trunk Panels, spare covers
Glove Boxes
Wire Harness Cover
.... Dream big, and we’ll help build your dreams!
34
RODFOAM EMBLEMS
Die-cut into these popular logos,
Rodfoam Emblems are easily applied to any panel prior to gluing
down the fabric. These emblems
save hours of “hand cutting with a
razor” time.
RD4601 Chevy Bow tie, 6”
RD4607 Ford logo, 16”
RD4608 V-8 emblem, 16”
$13/pr
$13 ea
$15 ea
$15 ea
$15 ea
Look! A last minute addition
RD3451 Kick Panels Pretrimmed to
fit `37 -`38 Chevy Trucks $ 69/pr
RD3455 Kick Panels Pretrimmed to
fit `39 -`46 Chevy Trucks $ 69/pr
edge and no more than 5” apart.
Carpeting on the bottom of a panel is
similar. Only we staggering the Carpet
Clips across the panels, so that the difference in thickness between the fabric and
carpet is split between the panels.
Remember that because of the thickness
of the carpet you’ll also want to remove
1/4” off the base panel that will be covered with carpet, not along the break
line, but on the outside edges. Otherwise
the finished panels may not allow the
door to close properly.
HANELINE GAUGES
LECARRA STEERING WHEELS
LOKAR PEDALS & HANDLES
Chrome steel with rubber inserts
HANELINE FIVE IN 1
5n1-CB
Chrome bezel w/black
Face
$465
5N1-CW Chrome bezel w/white
Face
$465
5N1-CP Chrome bezel w/pewter
Face
$465
5N1-CC Chrome bezel w/cream
Face
$465
5N1T-C Matching tach
$180
STANDARD SIZE
BAG-6004 Throttle pedal assembly
Pedal size is 1-3/4” x 3-3/4” $130
BAG-6007 Brake pedal Pedal size is
1-3/4” x 3-3/4”
$45
BAG-6003 Dimmer cover
2-3/8” x 1 x 3/8”
$25
MINI SIZE
BAG-6103 Throttle pedal assembly Pedal
size is 1-3/8” x 2-3/8”
$130
BAG-6106 Brake pedal
Pedal size is
1-5/8” x 3-7/16”
$45
BAG-6109 Dimmer cover
2-3/8” x 1 x 3/8”
$25
Mark 10 available with primered
rim or painted black.
LEC-72000 Primered rim
$159
LEC-71000 Painted rim, gloss black$244
LEC-3710 Add’l for billet alumimun
horn ring
$225
Banjo comes with leather over foam
padding; stainless steel center, 14-1/2”.
All Lecarra horn buttons fit. Includes billet
adapter to fit GM column.
LEC-512 Banjo
$425
HIDDEN ANTENNA
Requires 12volts
SG-6012 Throttle pedal assembly
Pedal size is 1-1/2” x 4”
$85
SG-6013 Brake pedal
Pedal size is 3” x 2”
$49
SG-6009 Dimmer cover
$25
BEEDE 5”
All include sending unit.
HB-SETGC 2 gauge set,
gold & cream
HB-SETPB 2 gauge set,
premier black
HB-SETCW 2 gauge set,
chrome & white
HB-SPDGC Speedo,
gold & cream
HB-SPDPB Speedo,
premier black
HB-SPDCW Speedo,
chrome & white
HB-QUDGC Quad gauges,
gold & cream
HB-QUDPB Quad gauges,
premier black
HB-QUDCW Quad gauges,
chrome & white
$465
$465
$465
$325
Billet aluminum steering column
dress-up kit. Kit includes Turn Signal Lever, Tilt Steering Lever and
Emergency Flasher Knob. Fits all
GM, 1969 - 1976 Chrysler and later
columns with single screw design.
Mounts on the inside top of the windshield
for the best performance. Note: radios signals
do not penetrate metal. Do not attempt to
mount the antenna under the dash on a metal car. Fiberglass cars can have the Antenna
mounted directly to the inside of the outside skin of the car. Antenna Box measures
3-7/8” x 7/8” x 3/4” and lead length is 102”
CAS-HIDANT
$40
SOUND
INSULATOR
$325
$325
$265
$265
$265
DUK-2200
$35
TIP
S
FOUR DOOR OR REAR QUARTERS
If you have a coupe, just pick a panel design you like.
But if you have a sedan, this seems to throw people off.
The worry is that it won’t all work for some unspecific
reason.
The reality is that many of our panels are specifically
designed for rear quarter/rear doors. In the two pictures to the left we show how a bunch of high school
students installed “The Healey” panels on their shop
built `37 Woody. They chose to upgrade the look by using the precut inserts as templates for real maple wood
insert. WOW!
35
$20/sht
LEC-40B 1940 Ford, painted
black (only)
$419
LEC-40U 1940 Ford, unpainted
$319
HORN BUTTONS AND HUBS
LEC-64200 GM polished hub
adapter-`67 & up
$68
LEC-16400 Standard hub
$40
LEC-26400 Polished hub
$50
LEC-16499 Machined billet hub
$69
LEC-3223 Full cover horn button
$55
LEC-3465 V8 horn button
$100
LEC-3722 Standard groovy
horn button
$50
LEC-3301 Aluminum covered button$30
LEC-3221 Billet recessed button
$52
LEC-3222 Billet smooth button
$50
W E AT H E R S T R I P P I N G & W I R I N G
Soffseal weatherstripping provides the best, and most complete kits to keep out and reduce N.V.H. (Noise, vibration,
harshness). We choose to feature their products as another
key need for any builder or hobbyist. Each Kit is versatile,
easy to install, All the parts necessary to finish the seals
in your street rod, custom or kit cars are included. These
kits have either a specific application or a universal kit can
be ordered, more model specific kit listings are available
on our web site, or call us today for your specific model.
48-50 FORD PICKUP F1 F2 F3 WINDSHIELD RUBBER STD
FD9210
$60
48-50 FORD PICKUP F1 F2 F2 REAR WINDOW RUBBER STD
FD9250
$37
53-55 FORD F100 AND F250 PICKUP WINDSHIELDRUBBERSTD
FD9214
$59
53-56 FORD F100 &F250 PICKUP WINDOW RUBBER STD
FD9255
$42
67 CHEVY CAMARO 2DR HTP W/STRIP KIT (INCLUDES BUMPER
KIT, DOOR W/STRIPS, HOOD TO COWL SEAL, ROOF RAIL W/
STRIPS, TRUNK W/STRIP, WINDOW W/STRIPS, DOOR U JAMBS,
PAINT GASKETS, PARK LENS GASKETS, QTR WINDOW SEALS,
SPLASH FLAPS, TAIL LENS GASKETS)
KIT305
$424
69 CHEVY CAMARO CNV W/STRIP KIT DELUXE INTERIOR
AUTHENTIC W/FELTS (INCLUDES CNV TOP KIT, BUMPER
KIT, DOOR U JAMBS DOOR W/STRIPS, HOOD TO COWL
SEAL, PAINT GASKETS, PARK LENS GASKETS, PILLAR POST
SEALS, QTR WINDOW SEALS, SPLASH FLAPS, TRUNK W/
STRIPS, WINDOW W/STRIPS) KIT
KIT310A
$713
UNIVERAL FIT STREET ROD AND CUSTOM STREET ROD
BUMPER BOX (100 PIECES 10 OF EACH BUMPER K102,
K103, K121, K124, K162, K183, K188, K190, K191, K192)
SRBOXL
$42
UNIVERAL FIT STREET ROD AND CUSTOM STREET ROD
BUMPER BOX (50 PIECES 5 OF EACH BUMPER K102, K103,
K121, K124, K162, K183, K188, K190, K191, K192)
SRBOX
$31
APPLICATION AND UNIVERSAL
WEATHERSTRIPPING KITS
KIT, 32 Street Rod 3 Window Coupe Steel Body, Original Ford Body.
W/Strip Kit, 2 Doors, 1 Trunk, Sides and Top, 1 Trunk
Bottom, 1 Hood to Cowl, 1 hood to Shell
KIT SRS2000
$120
33-34 Ford 3 And 5 Window Coupe, Original Ford Body
W/Strip Kit, 1 Hood To Shell, 1 Hood To Cowl, 2 Doors, 1 Trunk, 1
Trunk Bottom Kit
SRS2004
$147
47-50 Chevy Truck, Gmc Truck, Truck W/Strip Kit No Trim (Includes Door W/Strips, Front Glass Channel, Glass Run Channel,
Window W/Strip, Small Rear Glass Channel) Kit.
KIT900
$255
55 Chevy 150 210 Belair 2dr Sdn W/Strip Kit (Includes A Arm
Seals, Bumper Kit, Door W/Strips, Hood To Cowl Seal W/Clips,
Door J W/Strips, Lens Gaskets, Paint Gaskets, Trunk W/Strip,
Window W/Strips) Kit
KIT111
$348
55-59 Chevy Truck, Gmc Truck Truck Kit W/Trim (Includes Door
W/Strips, Front Glass Channel, Window Channel Kit, Large Rear
Glass Run Channel) Kit
KIT910a
$262
HIGHWAY 22 MODULAR PANEL SYSTEM
The Highway 22® Modular Panel System is versatile, easy to
install, exceeds the power handling capability of competing
systems, and fits like it came from the factory! All the terminals
and connectors to finish the basic wiring of your street rod,
custom or kit cars are included.
Highway 22 Universal Wire harness Update Kit #500695 $499
1957 Chevrolet Passenger Car Classic Update Kit #500434 $499
1947-1955 Chevrolet Truck Classic Update Kit #500467 $499
1967-1968 Chevrolet Camaro Classic Update Kit #500661 $539
1969 Chevrolet Camaro Classic Update Kit #500586 $539
NEW! 1967-1968 Firebird Classic Update Kit #500886 $539
NE W! 1969-1972 Nova Classic Update K it #500878 $539
NEW! 1964-1967 Chevelle Classic Update Kit #500981 $539
NEW! 1970-1973 Camaro Classic Update Kit #510034 $539
Color Combo bas
CARPET: Daytona Weave, Dark Blue
SEAT: Ultraleather,® Admiral
INSERT: Ultraleather,® Sand
DETAILS, DETAILS, DETAILS
Here’s a neat trick. Two “The Bobeck” panels are glued
together to form a cool headliner panel with the design
already formed in. This is a twist on traditional techniques for fabricating hard formed headliners. After the
headliner center panel is trimmed to size, side panels
are cut out of flat stock for around the cars interior.
36
THE ROWDY
RELAY COVER
Just like how rules are
written after someone has
been hur t. The Rowdy
Relay Cover was the
direct result of and accident.
So, please don’t let this
happen to you. Works with
both 20 and 30 amp relays
to protect you from exposer
to open or bare terminals.
RD5055 Rowdy R C $12ea.
SPEAKER PODS
Fitting speakers into places never
intended for them seems to be
the norm and the cause of many a
headache. Now, Dr. Panelstein says,
“Take two pods, install them in the
morning and you’ll be listening to
smooth sounds by the afternoon.”
Built for most any configuration,
each size pod is designed to be
mounted either flush to the existing
panel or partially recessed into the
panel for a tighter fit. Installation is
quick and easy — the finished look
is clean and professional.
5" ±
Varies
3" ±
RD4050 2-1/2” tweeter- flush mt
RD4052 Above w/o tweeter
$39/pr
$20/pr
4" ±
RD4051 2-1/2” tweeter - oval
RD4053 Above w/o tweeter
11" ±
RD4066 6”x21/2” w/tweeter flush mount
RD4054 4” flush mt - 9-1/2" O. D. $39/pr
RD4059 5” flush mt - 11" O. D.
$39/pr
RD4062 6” flush mt - 11-1/2" O. D. $39/pr
18" ±
5" - 6" - 7" ±
$39/pr
$20/pr
RADIO MOUNT
RD4055 4” recessed mount
$69/ea
See photo bottom of this page
$39/pr
$39/pr
$39/pr
This speaker insert is made for `73-`79 Ford Trucks door
panels. For a complete picture, go to page 23.
RD2010 For use with underdash cover
or for Mounting in headliners,
Std. DIN mount
$49ea.
RD3156 Speaker insert
$89/pr
RD3157 Speaker insert with flange for
a Universal fit, many applications$89/pr
RD3046 4” headliner mount
`67-`72 Chevy
$39/pr
Prefit to conform to the roof, fits in
back corners of the cab, will fit 4-1/2”
speaker.
14-1/2"
RD4067 6”x9” recessed mount
$39/pr
CHEVROLET TRUCK
KICK PANEL W/SPEAKER
CHEVROLET TRUCK
KICK PANELS INSERTS
Speaker panels are made for `73-`87
Chevrolet 1/2 Ton Truck, CHEYENNE
Model Kick Panels. Will Fit up to a 6-1/2”
speaker.
RD3061 Half KickPanel-73-87
$89/pr
Speaker inserts are made for `73-`91
SILVERADO, 3/4 Ton, 1 Ton, Blazer, and
Suburban Model Kick panels. Will Fit up
to a 6-1/2” speaker.
RD3069 Kick Panel Insert-73-91 $89/pr
SPEAKER INSERT
11" ±
$39/pr
Speakers not included unless otherwise indicated.
REUSABLE SPEAKER
TEMPLATES
HOW TO CHOOSE WHICH
POD?
For sound without an ugly speaker grill, we’ve developed
a quick template kit. Just mark the holes., drill through the
plastic panel, cover as directed and punch thru the fabric
from the back side. When the panel is installed only the
small holes in the panel are visible.
Choosing the right pod may seem daunting, but it’s
really quite simple.
The kit includes templates for one 8" round speaker and
one 6" x 9" speaker, a 3/16" punch and instructions.
RD4070 Speaker Templates
$20/kit
This is to accommodate the various sizes.
Flush Mount means that there is No room behind the
pod to allow the magnet of the speaker to recess into an
open pocket area behind the panel.
Recessed Mount means that the panel behind the
pod is open and you CAN recess the speaker magnet into
that open area. For a less raised speaker mount.
A common example would be If we’re mounting a 6-1/2”
speaker in a kick panel of a ‘47-72 Chevrolet Truck. Unless
we’re willing to cut the sheet metal in the kick panel area
you’re going to need a 6” Flush mount Speaker Pod.
The same thing goes for ‘56 Ford Truck. The Kick Panel
area is open behind the panel and you can use a 5” Recessed Mount Speaker Pod to mount a 5-1/2” speaker
and allow the speaker magnet to recess into that open
area behind the kick panel.
4,5, OR 6” Speaker Pod? We offer different sizes
for different speakers. The face is oversized for each size of
speaker . A 6” Speaker Pod has a 7” face, the 5” Speaker has
a 6” face, and the 4” Speaker Pod has a 5” face.
37
10” Recessed mount Speaker Pod installed- shown
with grill removed
The RodDoors Way means
“Interior before Paint.”
Choose your fabric and
decide on the final “look”
you desire. Remember that
if you want to match the
Whether you or a trim shop
builds your interior, there are
many steps to take to ensure a good job. The following
guide is to help you through the process and help make
sure you don’t end up with unexpected surprises($)!
Here’s a check list to help you make sure you’re ready
for upholstery:
paint to the interior, there
may be 80 colors of fabric
and 7 million colors of
paint. The chance of that
wild paint color matching a
fabric is very small. That’s
1 Headliner support bows installed if you’re missing
the factory bows or the top has been chopped; all
original wood wall supports are in place.
why you see so many
2 Floor pan and firewall finished and sealed. This is especially
important on glass-bodied cars.
white interiors!
3 If you’re using door panels other than RodDoors, or RodDoors
without integrated arm rests, be sure you have purchased arm
rests and fitted them.
4 Front (and rear) seat(s), if already purchased, centered and
bolted to body for safety.
5 Seat belts/harness purchased and installed.
6 Want an overhead console? Make sure it is purchased or
fabricated and test fitted. Wiring should be in place and all
functions tested and working.
7 Wiring complete – panel purchased and installed, wires run
where needed for courtesy lights, third brake lights, power
seats & door locks, door contacts, power antenna and power
windows. Extra wire length left for shrinkage in
final assembly?
8 AC/heating units installed and working. Defroster ducts
mounted and finished, including vents.
9 Wiper motors installed, wired and working.
10 Power windows and door locks purchased, installed, wired
and working.
11 All glass and weather strips installed.
12 Radio/CD-tape units test fitted and working. If possible, they
should be mounted.
13 Gas tank and filler neck sealed to prevent leakage in the shop.
There easily can be more. Make your list and check it
(twice)! Not overlooking something will save you money,
time and grief!
Remember...
gray, black, tan, and
“Interior before Paint”
means having a checklist,
so make one!
“Interior before Paint”
means trimming the panels
and getting them through
all those “ins and outs” of
fitting to the vehicle.
Now you're ready to paint
and you've lessened the
chance of scratching a
new high-buck paint job.
Plus if you need to weld
on any special brackets,
now is the time. After paint
it's too late.
It’s a process, but you
can do it!
The fine shops listed here
are all “Graduates” of the
RodDoors UniversityAUTHORIZED INSTALLERS PROGRAM.
They know “The RodDoors Way” and how
to deliver on your project vehicle.
Check `em out!
BLAST FROM THE PAST
POTTSTOWN, PA • 610-327-4366
C.A.R.S.
BELEWS CREEK, NC 27009 • 336-595-3900
D AND D CUSTOMS
CHURCH HILL, TN • 423-357-4704
GREENIE’S AUTO WORLD, INC.
OTEGO, NY • 607-988-2222
GOT IT COVERED
GONZALES, LA • 225-278-9425
HORTON ENTERPRISES
MILTON, ONTARIO, CANADA • 905-876-2124
MILD TO WILD
ALBUQUERQUE, NM • 505-244-1139
OLD DOG STREET RODS
MARYLAND HTS, MO • 314-291-7637
POP’S CLASSIC CARS
ELIZABETHTON, KY • 270-769-1053
REEDS EARLY IRON
HOT SPRINGS, AR • 501-624-5557
RICHCRAFT
POST FALLS, ID • 208-964-1429
For information on how you or your company
can become an RodDoors Authorized
Installation Professional
Call us today or for more info go to
RodDoors, Inc. 800 / 428-7114
1725 Davis Street
Rocky Mount, NC 27803-4313
RETURN SERVICE REQUESTED

RODDOORS NEW CATALOG 2008 8 1.indd

Transcription

Similar documents

Inspiring Surface Design

GlASS FibER REiNFORcEd CONcREtE

4M605051 Raaco Kufry na náradie Polypropylene XL - 34

- Stewart Brannen Millworks

weathertite

Grid-Wall Panel installation instructions

EVERLOCK````$flfatllJ!l Foundation Sidi,,!l.

Clean Room - STANLEY Access Technologies

SPEED RACER WARDROBE A List of parts

16` x 20` SBS Caribou Hut