VERSA™ Ecolage pattern contains 20% recycled content by weight

VERSA™ Ecolage pattern contains 20% recycled content by weight, minimum 10% post-consumer, and meets or
exceeds all Type II requirements of CCC-W-408A/D and Industry Voluntary Standard CFFA-W-101A/D.
Custom colors, weights, widths and microventing are available.
Construction: 20% recycled content by weight, minimum 10% post-consumer
Weight (Avg.): 20 oz/ly (452 gr/M2)
Width: 52/54” (132/137 cm)
Backing: Osnaburg
Installation: Reverse hang / Random match
Fire Safety: Class A (ASTM E-84) / Passes NFPA 286 Corner Burn / NFPA 101 Life Safety Code
Environmental and Health:
Recyclable through Versa’s Second-Look® Program
Meets State of Washington Building Specification for Indoor Air Quality
Meets California Section 01350 Indoor Air Quality Standard
Aggressive manufacturing materials recovery and reuse program
1825 MacArthur Boulevard
Atlanta, Georgia 30318
Phone 404.351.0044
Fax 404.351.7893
www.genesysinteriors.com
Highly cleanable water-based inks
PFOA free – does not contain Perfluorooctanoic Acid
Cadmium and mercury free
Free of PBDE’s (Brominated Flame Retardants)
Does not contain DEHP Plasticizers
Antimicrobial additives
USGBC LEED Support
MR – Materials and Resources – Recycled content
MR – Materials and Resources – Construction waste management
EQ – Indoor Environment Quality – Low emitting materials
800.222.7866
fax: 901.366.0447
www.eykon.net
Moisture, Mold and Mildew
Vinyl wallcovering functions as a vapor barrier. If water or moisture becomes trapped between the wallcovering and
wall cavity, an increased risk of mold may occur. Consult a building design professional on the proper use of vinyl
wallcovering. A mildew inhibiting additive has been added to help protect against fungal and other microbiological
growth. No additives however, will prevent mold growth if moisture is allowed to accumulate and its sources are not
eliminated. Further protection against mold growth may be achieved with Versa Permavent ®, a unique microventing
technology that literally “breathes,” helping manage the mobile moisture in walls.
Warranty
VERSA™ is guaranteed to be free of defects in workmanship and material for five years.
For additional details on Second-Look, moisture management, Permavent, warranty and other Versa innovations, visit our website at
versawallcovering.com.
Ve r s a w a l l c ov e r i n g i s r e c y c l a b l e
w h e n r e c l a i m e d th r ou g h th e Ve r s a
Se c on d -L ook ® p r og r a m .
All V E R S A ™ designs are copyrighted © 200 8 JA Apparel Corp.
versawallcovering.com
CARE & MAINTENANCE
VERSA VINYL WALLCOVERINGS
As with any quality product, proper care and maintenance will extend the useful life of your vinyl
wallcovering and help maintain its original beauty and finish.
The following general cleaning instructions will serve as a guide to normal cleaning maintenance:
Vinyl wallcovering should be washed regularly enough to prevent dirt and grime from
accumulating, and to maintain the original beauty of the vinyl. Depending on traffic (light, medium,
heavy), vinyl should be washed from once to two or three times a year.
Stains should be removed as quickly as possible to eliminate any possible reaction between the
staining agent and the wallcovering. Time is especially important for removing materials
containing colors or solvents such as ballpoint ink, shampoo, tints and some foodstuffs. If soilants
remain on the wallcovering too long, permanent discoloration may develop.
It should be noted that vinyl wallcoverings should not be sprayed with wax or other protective
coatings. Such applications would only tend to discolor the material, and, in any case, would offer
little protection.
Ordinary dirt and smudges can be removed with mild soap and warm water. If necessary, a
bristle brush can be used to remove dirt from the crevices of deeply textured patterns. Clean from
bottom, upward. Using a sponge, rinse thoroughly with clean water, from the top, down. Deeply
embossed wallcoverings need extra attention to prevent suds or loosened dirt from lodging in
depressed surfaces. Dry wallcovering with a soft, lint-free cloth or towel.
For more difficult stains that are only surface deep, the use of a stronger detergent is
recommended.
We recommend all cleaners first be tested in an inconspicuous area to insure compatibility with
the wallcovering.
Not recommended for cleaning are isopropyl alcohol, powdered abrasive cleaners, or steel wool,
as they may mar the surface, causing an unsightly appearance. DO NOT use active solvent type
cleaning preparations such as nail polish remover, tar and bug remover, etc., as they will remove
print and/or finish from the wallcovering.
With proper care and attention, Versa vinyl wallcoverings will remain beautiful and serviceable for
years.