Logenex Teledoor Bell System - Associated Telephone Industries Inc.

Transcription

Don’t open your
door
to the unknown
Don’t open your
door
to the unknown
Specifications
C404CR
Number Of Doors:
C404CR
C403HIFI
4 (max.)
3 (max.)
Call Forward:
C404CR/C403HIFI
Distinctive Ring
Instant,Delay
Yes
Caller ID:
C404CR/C403HIFI
Yes
Audio Monitor/
Listen In
Yes
Number of ring
attempts:
C404CR/C403HIFI
C404CR
C404CR/C403HIFI
Relays:
C404CR
C Series Controller
At the heart of every TeleDoorBell system is the controller. The controller
links your door stations to the phone system through its CA38A/RJ31X
phone jack. Inside the controller resides the logic and hardware to carry
out the functions of a TeleDoorBell system including the much talked about
call forwarding feature that can connect you no matter where you are…
instantly…without your visitors ever knowing you may not be on site.
1 to 6 (selectable)
Remote dial up access:
C403HIFI
Yes (PIN required)
(2A-30VAC/DC)
4 Momentary
(0.5s to 98s) /Latching 3
Momentary
(0.5s to 98s) /Latching
Relay door connection:
C404CR/C403HIFI
Current draw
Ring output voltage
Terminal Strip
300mA
180V RMS without load/
140V with load
RJ31X/CA38A jack:
When coupled with the Page/Mute module our HIFI series is capable
of sending mute commands to your home audio distribution system for
incoming phone calls and/or visitors. It also gives you the ability to page
through your home audio speakers with any corded or cordless phone.
Features
All inclusive: TeleDoorBell controllers include everything you need to install
a complete system in minutes, simply choose your TeleDoorBell door station
and you are ready to install.
C404CR/C403HIFI
Power supply
Operating temperature
Dimensions – Weight
Approvals: TeleDoorBell controllers are UL/ULC approved and CSA
approved for installations that require the highest standard.
Self contained: TeleDoorBell controllers have everything built-in including
up to 4 fully configurable relays, timers, call waiting module, call forward
module, door chime module, remote dial up module and distinctive rings for
each door station with caller ID.
Easy to install: Simply connect 2 wires of almost any gauge from the door
station to the controller, connect thenCA38A/RJ31X jack and cord to the
phone line, plug in the transformer and you’re live.
Any phone system: TeleDoorBell can connect to any analogue or business
phone system including VOIP phone systems.
6A-7500 Martin Grove Rd. Woodbridge, ON. Canada L4L 8S9
Toll Free: 1.888.790.5900 E-mail: info@logenex.com
For complete information please visit our website at www.logenex.com
©2011 Logenex Inovations Inc.
REV4 11/11
AUTHORIZED DEALER
1 Included
16VAC 500mA
(plug in type)
-20° to 50° C
1.8”(H) x 6.8”(W)
x 6.8”(L) – 1.15lbs.
Don’t open your
door
to the unknown
Specifications
Also available:
Audio (AD102-EF-_)
Satin Brass **
Polished Brass **
Bronze *
Antique Brass *
Power source
24VDC from controller
Current Draw
10mA
Distance to controller (24
AWG UTP)
1000’
Speaker type
Volume control
Copper *
AD102-EF-ANVC
Antique Nickle **
Oil Rub **
Oil Rub Bronze *
AD102-EF-AB
Connection type
Operation temperature
When lit
Flush Mount
*
Features
Call Forwarding: TeleDoorBell includes call forwarding that can instantly
connect your front door station to your cell phone or secondary location
without your visitor ever knowing.
Relay Control: Built-in relays allow you to operate any electronic door
hardware such as electronic strikes or bolts, magnetic locks, garage and
bay doors from any phone. Activate lighting, thermostat, alarm system and
more instantly by pressing a few keys on your premise or cell phone.
-20° to 50° C
5.15”(H) x 4”(W) x 1.6”(D)
Video (AD102-EF-__VC )
Power source
250mA - 12VDC
Current Draw
185 mA
AWG UTP)
Connection type
Chip set
Resolution
F stop
Lux rating
Infrared Throw
S/N Ratio
Flush Mount
Additional Features:
Colour Video CCTV Camera: TeleDoorBell Elite video door stations feature
high-resolution, low light CCD cameras that are adjustable to select your
field of view for clear images even in total darkness. Providing true 24/7 live
video surveillance images TeleDoorBell Elite video door stations are suitable
for integration with any DVR, PC, security monitor or television.
Call Waiting: TeleDoorBell will sound a call waiting tone when you are on
another call. You can place your call on hold, speak to the visitor then
return back to your call with just a few strokes on your phone.
Caller ID/Distinctive Ring: Distinctive ring and caller ID identifies who
is calling as every TeleDoorBell door station features both Caller ID and
distinctive ring.
250’ video signal + 250’
video power
Terminal
Sony SuperHAD
580TVL High Resolution
1.2
0.01 lux
20’
>48db
Overall dimensions:
Remote Dial-up: Access TeleDoorBell from offsite and perform any function
as though you were on site.
REV4 11/11
Terminal
**
When you’re looking for a classic door entry intercom of the highest quality
then look no further than the Elite Series TeleDoorBell. It easily connects
your entry door to all the premise phones. With such features as colour
matched illuminated call button, superior sound quality, low profile and
packed with the most features of any door entry system the Elite Series will
satisfy the most discerning designers and architects. Made of solid brass,
TeleDoorBell Elite door stations are rugged, weatherproof and built for
North American climates. Perfect for commercial or residential applications
demanding the highest caliber, TeleDoorBell Elite Series seamlessly
integrates to virtually any analogue, VOIP or business phone system and is
available with or without adjustable night vision colour video cameras.
Adjustable
Overall dimensions:
** Custom color matching available
TeleDoorBell Elite Series
2” 45ohm 0.5 watt
AUTHORIZED DEALER
6.75”(H) x 4”(W) x 1.6”(D)
3D-DNR & SENSE-UP
SS-WDR
Color Calibration
Don’t open your
door
to the unknown
Specifications
Also available In:
Audio (AD102-S/AD102-SF)
Satinbrass
Antique Nickle
Polished Brass
Antique Brass
Power source
Current Draw
10mA
AWG UTP)
1000’
Speaker type
Volume control
AD102-SVC
Adjustable
AD102-S
Bronze
Connection type
Copper
When lit
AD102-SFVC
Oil Rub
Terminal
-20° to 50° C
Overall dimensions:
Surface
AD102-SF
2” 45ohm 0.5 watt
Oil Rub Bronze
Flush
4.4”(H) x 4.4”(W)
x1.375”(D)
5.1”(H) x 5.1”(W)
x1.375”(D)
TeleDoorBell S Series
When you're looking for a contemporary and stylish, vandal proof door
entry intercom to simply, easily connect your entry door to all the premise
phones look no further than TeleDoorBell. The stainless steel S Series
TeleDoorBell door station is a solid construction, low profile clean design
and packed with the most features of any door entry system. Built for
North American climate this weatherproof door station will stand up to
the elements. Perfect for commercial or modern residential applications,
TeleDoorBell seamlessly integrates to virtually any analogue, VOIP or
business phone system and is available with or without colour camera
featuring infrared illuminators for night vision.
Video
(AD102-SVC/AD102-SFVC Only)
Power source
250mA - 12VDC
Current Draw
185 mA
AWG UTP)
Connection type
Chip set
Resolution
F stop
Features
Lux rating
Infrared Throw
S/N Ratio
video power
Terminal
Sony SuperHAD
1.2
0.01 lux
20’
>48db
Overall dimensions:
Surface (AD102VC)
Flush (AD102SFVC)
Remote Dial-Up: Access TeleDoorBell from offsite and perform any function
Colour Video CCTV Camera: TeleDoorBell video door stations feature
high-resolution CCD cameras including infrared illuminators for clear images
even in total darkness Providing true 24/7 live video surveillance images
TeleDoorBell video door stations are suitable for integration with any DVR,
PC, security monitor or television.
Call Waiting: When you are on another call, TeleDoorBell will sound a call
waiting tone so you can place your call on hold, speak to the visitor then
return back to your call. This feature works even if you don’t subscribe to
Call Waiting from your provider.
Caller ID/Distinctive Ring: Each door station has its own unique distinctive
ring and caller ID to differentiate it from inbound phone calls.
REV4 11/11
AUTHORIZED DEALER
4.4”(H) x 4.4”(W)
x1.1.8”(D)
5.1”(H) x 5.1”(W)
x1.375”(D)
3D-DNR & SENSE-UP
SS-WDR
Color Calibration
Don’t open your
door
to the unknown
Specifications
LX7IWLCD
Screen Size
7” Widescreen
Input Signal
NTSC / PAL
Resolution
1440 x 234
Brightness
300 NIT
Dimensions HWD
Measurements Raw HWD
Features:
LX7IWLCD-B
Rearview - Mounting doglegs
Color Options:
LX7IWLCD-W, LX7IWLCD-B
The LX7IWLCD was developed with convenience in mind, providing a
compact in-wall solution to view multiple cameras where a conventional
monitor or TV cannot be installed. Developed with our dry wall mounting
bracket; it allows for easy flush mount installation like any in-wall speaker.
A cut-out template is provided to reduce measurement and marking errors
to save you time.
Features
•
By utilizing our Multi-Relay Configuration (**3) on our C404CR
controller, this will provide relay contact closure for instant image upon
button press; allowing for no time delay and a quick response for your
visitor.
•
Dual Video Inputs (AV1,AV2) with RCA connections, with video sensing
to provide auto switching of inputs, and auto-off without a video signal.
REV4 11/11
AUTHORIZED DEALER
4 15/16” x 7 1/2” x 3/4”
HOLE - 7 1/8” x 4 1/2”
Measurements Raw HWD
Auto turn on
Auto video source on
Black
White
Don’t open your
NEW
door
to the unknown
Specifications
Audio
(AD102-X/AD202-XVC)
Power source
Current Draw
10mA
AWG UTP)
1000’
Speaker type
Volume control
Connection type
2” 45ohm 0.5 watt
Adjustable
Terminal
-20° to 50° C
Overall dimensions:
AD102-X
AD202-XVC
Surface Mount
(Panning Camera)
6.15”(H) x 4.3”(W) x
0.5”(D)
Video (AD102-XVC Only)
TeleDoorBell X Series
When you're looking for a economical solution for a door entry intercom
to simply, easily connect your entry door to all the premise phones look
no further than TeleDoorBell. Its clean lines, illuminated call button and
low profile is designer approved and packed with the most features of any
door entry system. Rugged and weatherproof, TeleDoorBell door stations
are built for North American climate. Perfect for commercial or residential
applications, TeleDoorBell seamlessly integrates to virtually any analogue,
VOIP or business phone system and is available with or without colour
camera featuring infrared illuminators for night vision.
Features
Power source
250mA - 12VDC
Current Draw
185 mA
AWG UTP)
Connection type
Chip set
Resolution
F stop
Lux rating
Infrared Throw
S/N Ratio
Surface Mount
Colour Video CCTV Camera: TeleDoorBell video door stations feature
even in total darkness. Providing true 24/7 live video surveillance images
TeleDoorBell video door stations are suitable for integration with any DVR,
PC, security monitor or television.
Call Waiting: When you are on another call, TeleDoorBell will sound a call
waiting tone so you can place your call on hold, speak to the visitor then
return back to your call. This feature works even if you don’t subscribe to
Call Waiting from your provider.
Caller ID/Distinctive Ring: Each door station has its own unique distinctive
ring and caller ID to differentiate it from inbound phone calls.
REV4 11/11
Terminal
Sony SuperHAD
1.2
0.01 lux
20’
>48db
Overall dimensions:
Remote Dial-Up: Access TeleDoorBell from offsite and perform any function
video power
AUTHORIZED DEALER
7.85”(H) x 4.3”(W) x
0.5”(D)
3D-DNR & SENSE-UP
SS-WDR
Color Calibration
Don’t open your
door
to the unknown
Specifications
Audio (ADMDUV4 /ADMDUV4VC)
Power source
Current Draw
10mA
AWG UTP)
1000’
Speaker type
Volume control
Connection type
2” 45ohm 0.5 watt
Adjustable
Terminal
-20° to 50° C
Overall dimensions:
Surface
MDUV4-LX-VC (MDUV4-LX-Audio Only)
Flush
8.56”(H) x 5.13”(W) x
2.1”(D)
8.56”(H) x 5.13”(W) x
1.65”(D)
TeleDoorBell MDU Series
The TeleDoorBell MDU series is a full featured multi dwelling unit door entry
intercom. This easy to install multi-tenant version can quickly connect up
to 4 suites sharing a single entry point. Available with removable back box
the MDUV4LX can be recessed or surface mounted. Your tenants are now
connected through their phones to the TeleDoorBell MDU series door entry
station without the need of running more cable to each suite or having your
installing a costly line at the entry point. The MDUV4LX is available with
or without 24/7 live video. Rugged, vandal resistant, the metal face plate
will stand up against the elements for years. Perfect for commercial or
residential applications, TeleDoorBell will seamlessly integrate to virtually
any analogue, VOIP or business phone systems that may be on site.
Features
connect the front door station to your tenant’s cell phone or secondary
location without visitors ever knowing.
Relay Control: Built-in relays allows tenants to operate electronic door entry
hardware such as strikes or bolts, magnetic locks, garage and bay doors
from their phone or cell phone. garage and bay doors from any phone.
Activate lighting, thermostat, alarm system and more instantly by pressing a
few keys on your premise or cell phone.
Video (ADMDUV4VC Only)
Power source
250mA - 12VDC
Current Draw
185 mA
AWG UTP)
Connection type
Chip set
Resolution
F stop
Lux rating
Infrared Throw
S/N Ratio
Surface
Flush
Call Waiting: When tenants are on another call, TeleDoorBell will sound a
call waiting tone so they can place the call on hold, speak to the visitor then
return back to their call. This feature works even if they don’t subscribe to
Call Waiting. For tenants without land line service, see the Logenex TBG2
module.
Caller ID/Distinctive Ring: Distinctive ring and caller ID identifies who is
calling as every TeleDoorBell system features both Caller ID and distinctive
ring.
REV4 11/11
Terminal
Sony SuperHAD
1.2
0.01 lux
20’
>48db
Overall dimensions:
Colour Video CCTV Camera: TeleDoorBell MDU video door stations feature
even in total darkness. Providing true 24/7 live video surveillance images
TeleDoorBell video door stations are suitable for integration with DVRs, PCs,
security monitors or televisions.
video power
AUTHORIZED DEALER
8.56”(H) x 5.13”(W) x
2.1”(D)
8.56”(H) x 5.13”(W) x
1.65”(D)
3D-DNR & SENSE-UP
SS-WDR
Color Calibration
Don’t open your
door
to the unknown
Specifications
CMDUV4
Number of Doors:
Number Of Tenants/
CO’s:
Call Forward:
Distinctive Ring:
Caller ID:
Speaker/Relay
connection:
Current draw:
MDU Series Controller
RJ31X/CA38A jack:
Power supply:
Operating temperature:
Dimensions – Weight:
Features
All inclusive: TeleDoorBell controllers include everything you need to install
a complete system in minutes.
Approvals: TeleDoorBell controllers are UL/ULC approved and CSA
approved for installations that require the highest standard.
Self contained: TeleDoorBell controllers have everything built-in including 2
relays, timers, call waiting module, call forward module, distinctive ring and
caller ID.
Easy to install: Simply connect 2 wires of almost any gauge from the door
station to the controller, connect thenCA38A/RJ31X jack and cord to the
phone line, plug in the transformer and you’re live.
Any phone system: TeleDoorBell can connect to any analogue or business
phone system including VOIP phone systems.
REV4 11/11
No
4
Ring output voltage:
Yes
Number of ring
attempts:
Number of Relays:
Instant,Delay
Yes
Relays:
At the heart of every TeleDoorBell system is the controller. The controller
links your door station to each tenant’s phone system through its CA38A/
RJ31X phone jack. Inside the controller resides the logic and hardware to
carry out the functions of a TeleDoorBell system including the much talked
about call forwarding feature that can connect you no matter where you
are…instantly…without your visitors ever knowing you may not be on site.
Each tenant has their own self-contained programming within the controller,
to tailor it’s fucntions; ringer on/off and call forwarding (off/delay/instant)
to best suit their needs.
4
Audio Monitor/
Listen In:
Remote dial up access:
CMDUV4
1(max.)
AUTHORIZED DEALER
No
(2A-30VAC/DC)
2 Momentary
(6s or 10s)
RJ11
(1 connector included)
300mA
180V RMS without load/
140V with load
4 Included
16VAC 500mA
(plug in type)
-20° to 50° C
1.8”(H) x 6.8”(W)
x 6.8”(L) – 1.15lbs.
Don’t open your
door
to the unknown
Modulator SCFM Series
Modulating CCTV is the most convenient, preferred method of viewing
residential cameras. Our SCFM series modulators trap a single incoming RF
channel without affecting other RF or their digital channels. It then inject
a CCTV signal on the same analogue channel and its corresponding digital
channel through the Digital Cable Receiver* and distributed throughout
the premises. Easy, fast, precise the SCFM modulator is today’s choice in
today’s digital world. Installation takes only a matter of minutes with true
“Plug and Play” simplicity as no external deletion filters are required and it
works with digital cable. The unit is bi-directional meaning PPV and VOD is
uncompromised. Clients can still view the adjacent analog channels which
is perfect for applications utilizing a combination of analog and digital
televisions. Our products are made with your clients in mind by using only
quality components.
SCFM Series Modulator
* This is a function of your digital box in conjunction with your service provider. Not
all digital boxes will convert an analogue channel to corresponding digital nor are all
cable providers able to provide this service. Ask your provider what the dedicated
‘security camera channel’ is in your area.
Specifications
RF
Modulator Frequency
Range
CATV Throughput
Frequency Range
Channels Available
FCC Frequency Offsets
Output Level
RF High Output Level
(Adjustable)
Output Impedance
A/V Ratio
Frequency Stability,
Visual
Aural Intercarrier
Frequency
Spurious Outputs
In-Channel C/N
Broadband Noise
54 - 552 MHz.
5-1000MHz.
Factory ordered for a
single channel: EIA CATV
channels 2 to 78 and 95
to 99.
All aeronautical channels
offset positive with a tolerance of ±5 kHz.
1 Vp-p ±3 dB, manual gain
adjust with front panel
control.
Input Impedance
75 Ohms, return loss of 18
dB minimum
Frequency Response
75 OHMS, return loss of
14 dB, nominal
Audio Carrier -20 to -12 dB
referenced to video carrier,
adjustable.
Within ±10 kHz of assigned
channel frequency; ±5 kHz
on FCC offset channels.
4.5 MHz, ±5 kHz.
-60 dBc minimum, measured at -15 dB A/V ratio
and with modulator output
level of +55 dBmV.
Better than 60 dB.
-95 dBc @ ±30 MHz or
greater spacings. (Specified levels are referenced
to the video carrier and
measured in a 4 MHz
bandwidth).
Flat ±2 dB from 30 Hz to
4.2 MHz.
Video S/N
60 dB, luminance
weighted.
L/C Delay
Within 50 nSec of 0 nSec
L/C delay (complies with
FCC rules, 76.605).
+5 dBmV
+55 dBmV
+43 to +55 dBmV
Differential Gain
Differential Phase
Auxiliary AC Outlet
Total AC Power Input
175 mV rms minimum.
Manual gain adjustment
with front panel control.
Input Impedance
10K Ohms, unbalanced.
Pre-emphasis
75 µ Sec.(flat by moving
internal jumper)
Frequency Response
4.5 MHz Intercarrier
Stability
19” W x 1.75” H x 4.0” D.
Connectors
Within ±5 kHz, 0° C to
+50° C.
1.5% maximum.
Hum and Noise
-60 dB minimum, referenced to 25 kHz peak
deviation.
Nominal 120 VAC 60 Hz,
610 Watts, maximum.
Size
Weight
40 Hz to 15 kHz, ±1.5 dB,
referenced to 75 µ Sec
pre-emphasis curve.
Total Harmonic
Distortion
Nominal 120 VAC, 600
Watts, maximum.
0° C to +50° C, ambient.
Audio
Input Level for 25 kHz
Peak Deviation
115 VAC ±10%, 60Hz, 10
Watts.
Operating Temperature
Range
Less than ±5 degrees (10
to 90% APL).
REV4 11/11
Modulator Power
Requirement
Less than ±5% (10 to 90%
APL).
General
VIDEO
Input level for 87.5%
Modulation
AUTHORIZED DEALER
3.6 lbs.
Video input, Audio input,
RF output, and Monitor
output are all type F.
door
-
-
-
Don’t open your
Power
A
Loop Patch
Power
A
Loop Patch
( to T.V. )
( from Cable provider )
Max
Min
Max
Min
( to T.V. )
( from Cable provider )
Min
Max
Output Level
Min
Max
A/V Ratio
Channel
Max
Min
Video Level
SCFM
Output
Cable In
B
Max
Min
Audio Level
A/V Ratio
Output Level
SCFM
Output
Cable In
B
Min
Max
Audio Level
Min
Max
Video Level
REV4 11/11
AUTHORIZED DEALER
to the unknown
Don’t open your
door
to the unknown
TeleDoorBell Modules
Phone line simulator TBG 2: Not everyone subscibes to a land line
telephone provider and for those who don’t we have the solution when
installing a TeleDoorBell system. The TBG 2 module telephone line
simulator module connects the TeleDoorBell system to the RJ45 phone
jacks already installed in the premises. Now, by simply pluging in any
corded or cordless phone you are connected to your TeleDoorBell system
and all its functions.*
*Remote dial up and call forward not enabled.
TGB2
Page/Mute capabilities M303HIFI: Link your TeleDoorBell to more than just
your phones. The page/mute moduler links to your TeleDoorBell HIFI series
controller to your Home Audio System via its page/mute input of your
amplifier. Now inbound phone calls and TeleDoorBell door stations can
mute your home audio system making sure you won’t miss a call or visitor
because of the music playing too loudly. What’s more is you now have
the ability to page throughout the home via your audio speakers already
installed by using any corded or cordless phone in the house.
M403HIFI
Wireless interface/Ring Boost RVB7.5: The wireless telephone interface
module RVB7.5 is designed for those rare installs that involve cordless
phones utilizing sine wave transmission instead of the more popular square
wave technology used to communicate between base station to the
cordless handsets. By adding this module to your TeleDoorBell system you
will ensure communication no matter what technology is employed. Where
you need to ring a very large number of phones in one premises the RVB7.5
module will answer the call…so to speak.
RVB7.5A
DSL Filter
UL/ULC certified, the LX DSL 3F is the only one of its kind and filters out
all noise associated with Hi Speed DSL Internet service. Unlike other DSL
filters that filter out most of the noise, the LX DSL 3F filter stands alone and
eliminates 100% of the DSL line noise.
Why is that important? Because as an security provider you want to be
sure that the alarm system you install is never compromised by the DSL
carrier. As a security provider in today’s competitive market you also need
to be cost effective. When you dial up an alarm panel to make changes, no
matter what the alarm panel’s make or model, you can connect everytime.
What’s more is that with our auxilliary port, the LX DSL 3F DSL filter
allows you to quickly and easily connect a butt set to facilitate on site
troubleshooting. You could use this port to remove all other DSL filters on
the phone sets throughout the premises, nice touch.
REV4 11/11
LXDSL3F
AUTHORIZED DEALER
Don’t open your
door
to the unknown
Specifications
SLM-1A
Channel range
Frequency range
Accuracy
Input impedance
Measuring
characteristics
Wave Detection
Displayed information
Display
Approximate
usage time
Power source
SLM- 1A
RF Signal Meter
Charging duration
Power adaptor
Operating Temperature
Built for precise field testing, the SLM-1A is a handheld, precise, portable
signal meter with features never before offered on a meter this affordable.
The SLM-1A signal meter instantly, accurately checks signal strength directly
from your cable provider or at any point throughout your distribution
network. We include information such as cable loss charts, ideal signal
strength range and more to help determine where (if at all) amplification
is needed. This is an invaluable tool that can ascertain weather or not your
CATV wiring is troublefree from the moment it enters the premises.
Features
Channel Selectable: The SLM-1A provides you with a precise reading for
each channel or frequency, not simply an average of all channels. With
digital cable this information is more valuable than ever.
Compare Channels: Although cable providers strive to give each customer
uniform signal strength, it rarely occurs. Seldom will you find the strength
of channels in the 100’s as strong as the lower channels. The SLM-1A allows
you to view multiple channels with its large LCD screen giving you ‘slope’ or
‘tilt’ from your provider.
Information you need: Simply connect your RF feed to the SLM-1A and you
have db level for video and audio, frequency (MHz), signal to noise ration
and video to audio ratio. Select and compare by frequency or by channel
instantly.
Built for the field technician: The SLM-1A RF meter works outside or inside
with operating temperature as low as -30o C. The SLM-1A comes with fully
rechargeable lithium battery and features battery signal strength meter,
carrying case and more.
REV4 11/11
AUTHORIZED DEALER
2 to134 NTSC CATV
14 to 83 Off Air/ ATSC
46 to 870Mhz
1.5dBuV
75 Ohm F connector
Single channel, multiple
channel
Peak Value
dB, Mhz
Signal to noise ratio
Video to audio ratio
Tilt/Slope
Digital LCD
4.5 hours
Internal
Rechargeable Battery NiHy DC 7.2V/1.6Ah
12 to 14 hours
Plug in AC120VAC/50Hz
-20oC to +40oC
Don’t open your
door
to the unknown
COAXIAL CABLE ATTENUATION (LOSS) in Decibels ( dB)
100 FEET (ft)
FREQUENCY
CHANNEL
30 METERS (M)
RG59/U
RG6/U
RG7/U
RG11/U
MHz
N#
RG59/U
RG6/U
RG7/U
0.77
0.57
0.56
0.36
7
T7
0.23
0.17
0.17
0.11
1.88
1.5
1.22
0.95
55
2
1.85
1.48
1.2
0.94
3.89
3.12
2.49
1.98
250
29 (P)
3.83
3.07
2.45
1.95
4.27
3.43
2.74
2.17
300
37 (AA)
4.2
3.38
2.7
2.14
4.88
4
3.2
2.53
400
54 (RR)
4.8
3.94
3.15
2.49
5.5
4.51
3.61
2.85
400
70 (HHH)
5.41
4.44
3.55
2.81
5.9
4.76
3.8
3.01
550
78 (PPP)
5.81
4.69
3.74
2.96
REV4 11/11
AUTHORIZED DEALER
RG11/U
Don’t open your
door
to the unknown
Specifications
Telegram
CPU
Pentium4 Dual Core
3.0GHz
Chipset
Intel NM10 Express
FSB
DMI
Hard Drive
250 GB
Hard Drive Interface
SATA
Memory
Number of Slots: 2
Installed Memory: 4 GB
Maximum Memory: 4 GB
Type: DDR3
Graphics
Intel 3150
Audio
6 CH Intel HD Audio
LAN
10/100/1000
I/O Ports
4 USB 2.0
1 VGA
1 DVI
1 LAN
1 RS-232 COM (DB9)
1 RS-232 COM (DB25)
1 PS2 Mouse\ 1 PS2
Keyboard
3 Audio Jacks: Line-out,
Line-in, Mic-in
Dimensions
9.5” W x 7.5” D x 2.5” H
(2U Rack Space Required)
Benefits
High impact "moving" adverts get attention
Immediate & simultaneous updating of all screens
No printing or distribution costs
Schedule different adverts for different times of day.
1 or many screens per location
What is Digital Signage?
1.
2.
3.
One or more video screens (of any size) located at your premises.
Showing high-impact moving adverts.
Controlled on-line from a central location using our Digital Signage
Advertising Software.
Show different ads on different screens, or all same.
Less "clutter" in store from multiple posters etc
Create income source - Franchisors/ Buying Groups
manage & control stores advertising schedules.
Why Telegram?
•
•
•
•
•
•
Flexible. Add software options if required
No recurring costs or fees.
Use your own content, OR we can custom-create for you.
From 1 to 999 locations
Simple to use
Lowest cost in the world - By far!Screen Format: 16:9
REV4 11/11
AUTHORIZED DEALER
Don’t open your
door
to the unknown
Specifications
SCDM
Video Inputs:
Input Resolutions:
Audio Inputs:
Logenex SCDM
During the past five years, millions of digital flat panel television displays
have been placed where we work, shop, vacation, educate ourselves and
even where we sleep. Most display devices deployed in these locations
receive content via a traditional coaxial CATV type distribution network.
The intent of facility owners such as in the hospitality industry is to
create a home environment for their customer. Savvy entrepreneurs have
come to realize there is an opportunity to offset the costs of digital flat
panel displays by allowing advertisers access to these units for targeted
messaging directly to consumers while they engage in activities away
from home. Logenex introduces a high quality and affordable solution that
uses the legacy coaxial cable network to connect digital signage content
providers with millions of existing flat panel displays where consumers are
most likely to view them.
Logenex’s SCDM will encode a single uncompressed program derived
from devices with HDMI, Component Video or VGA outputs to HD MPEG2
video. An internal QAM modulator and low noise upconverter allows
existing legacy fiber/coax networks to be used as distribution channels
for digital signage content. This provides instant access to an extensive
network of digital displays capable of viewing valuable advertiser based or
informational video in a vibrant “High Definition” format.
The SCDM comes in a convenient desk top package.
Applications:
•
•
•
•
•
•
Digital Signage
Commercial Business-to-Business
Health Care
Government/Military
Cable TV/Networks
Benefits:
•
•
•
•
Video Encoding:
Resolutions:
Color Sampling:
REV4 11/11
480i, 480p, 720p, 1080i
video
L-R baseband audio, dual
RCA , S/PDIF optical audio, 32kHz-192kHz sample
rate PCM, HDMI embedded audio, 32kHz-192kHz
sample rate PCM
MPEG2
720x480, 1280x720,
1920x1080 - determined
by input.
4:2:2.
Aspect Ratio:
Determined by input.
GOP:
User adjustable from
1 - 30.
Audio Encoding:
QAM Output:
Frequency Coverage:
Channel Plans:
Output Power:
Output Level Adjustment
Range:
Phase Noise:
Broadband noise:
MER:
MPEG1, Layer 2 (MP2)
64QAM or 256QAM, ITU
Annex B
5 - 1000 MHz
STD, HRC, IRC, Broadcast
and T Channels.
+45 dBmV
15 dB
-95 dBc / Hz @ 10 kHz
offset
-75 dBc @ > ±12 MHz
offset, 4 MHz BW.
>40 dB equalized
Channel Frequency
response:
< 1 dB
Carrier Suppression:
>40dB
I/Q inbalance:
Output Level Accuracy:
Spurious:
< 1 degree
±1 dB
> -60 dBc;
Second Harmonic in the TChannel band > -55 dBc
Format:
Table-top chassis, with
optional 2-unit mounting
in 1 RU
19” rack.
Power:
+5V from supplied power
supply.
Supports 480i, 480p, 720p and 1080i resolutions
MPEG1, Layer 2 audio (MP2)
A frequency agile output to 1000MHz and +45dBmV output level
insure simple trouble free integration onto existing networks
Designed, manufactured and supported by R.L. Drake, a renowned
leader in communications since 1943
VGA (with pass-through to
monitor)
HDMI (unencrypted)
Component (Y-Cr-Cb)
Composite via Y input
for 480i
AUTHORIZED DEALER
Don’t open your
door
to the unknown

Logenex Teledoor Bell System - Associated Telephone Industries Inc.

Transcription

Similar documents

Zak McKracken – Mayan Maze Map

LifeScapes Highboy Storage Shed

LiftMaster 81LM

Rilo Kiley After Hours

8`Wide Woodside Vinyl Storage Sheds

weathertite

TeleDoorBell Brochure 2006-1Y

“Over 125 Years of Quality” Double Acting Spring Hinges

TorqueMaster PLUS Springs

User Manual