car alarms - TSS Group sro
Transcription
car alarms - TSS Group sro
CAR ALARM CAR ALARM KEETEC TS 100 KEETEC TS 10 car alarms & immobilizers Car alarm with two remotes with hopping code and built-in ultrasonic sensor with adjustable sensitivity. Its designed for vehicles with 12V supply voltage and it protects doors, trunk and bonnet. The car alarm system can be controlled by its remotes or by the factory remotes (using external CAN BUS module EASY CAN). PC Setup program for easy configuration. The system comes with 4 various sets of remotes. MAIN FEATURES: CAR ALARM WITH 2 REMOTES WITH HOPPING CODE BUILT-IN IMMOBILIZATION CIRCUIT (NO/NC) MONITORING DOORS, TRUNK AND HOOD BUILT-IN ULTRASONIC SENSOR WITH ADJUSTABLE SENSITIVITY WARNING FUNCTION AT 433MHZ INTERFERENCE CAN BUS CONNECTION (OPTIONAL) CONFIGURATION VIA PC (PC SETUP) EMERGENCY PIN CODE DEACTIVATION ALARM HISTORY LED VALET SWITCH Car alarm with two remotes with hopping code and dual-zone shock sensor. Its designed for vehicles with 12V supply voltage and it protects doors, trunk and bonnet. The car alarm is equipped with functions as re-arming, vehicle searching, lock reminder, silent activation and many others. 4 various sets of remote controls. MAIN FEATURES: CAR ALARM WITH 2 REMOTES WITH HOPPING CODE DUAL-ZONE SHOCK SENSOR DOUBLE LOCK/UNLOCK PULSE SEQUENTIAL TURN SIGNALS OUTPUT IMMOBILIZER OUTPUT (-300MA) CENTRAL LOCKING OUTPUTS (-300MA) EMERGENCY PIN CODE DEACTIVATION TSS Group Tř. Tomáše Bati 145 763 02 Zlín - Louky Czech Republic tel.: +420 577 019 603 e-mail: export@tssgroup.cz http://en.tssgroup.cz www.keetec.eu CAN BUS CAR ALARM CONTACTLESS IMMOBILIZER GSM CAR ALARM KEETEC TS CAN KEETEC TS IMO KEETEC TS GSM RC SMART (optional) module RF SMART (optional) CAN BUS car alarm with built-in immobilizer circuit controlled by factory remotes. TS CAN system can be installed as analogue system or using CAN BUS or combination of both. PC Setup program for configuration of all settings, functions, view of alarm history and for online diagnostic of inputs and much more. The car security is increased with additional RF SMART module. Anti-theft system with wireless transmitters, RFID card and two built-in immobilizer circuits. The system is always active (engine immobilization), if the transmitter is out of the range or E-card is not scanned or combination of both. The remotes are equipped with motion sensor to increase the battery lifetime. PC Setup program for easy configuration. CAN BUS car alarm with built-in GSM/GPS module, immobilizer, RF interface, accelerometer. The system sends SMS with GPS location or it makes a call on authorized phones, when alarm is triggered. Alarm can be controlled by factory remotes or additional remotes. Firmware and database of supported vehicles are monthly updated. The RF SMART functionality can increase the car security. MAIN FEATURES: MAIN FEATURES: MAIN FEATURES: CAN BUS OR ANALOGUE SYSTEM BUILT-IN IMMOBILIZATION CIRCUIT (NO/NC) TWO INPUTS FOR ADDITIONAL SENSORS SEQUENTIAL OUTPUT FOR DIRECTIONAL LIGHTS ALARM HISTORY CONFIGURATION VIA PC MONTHLY FIRMWARE UPDATES EMERGENCY DEACTIVATION BY PIN RF SMART MODULE (OPTIONAL) SIREN 20W HIGH-SECURITY IMMOBILIZER 2 BUILT-IN IMMOBILIZATION CIRCUITS (NO/NC) 3 MODES OF IMMOBILIZER DEACTIVATION 2 WIRELESS TRANSMITTERS WITH RANGE UP TO 5 METERS LONG REMOTE´S BATTERY LIFE (SLEEP MODE) IDENTIFICATION E-CARD (RFID) CONFIGURATION VIA PC (PC SETUP) EMERGENCY PIN CODE DEACTIVATION ALARM OUTPUT (SIREN OR GSM PAGER) VALET MODE GSM/GPS CAR ALARM WITH GPRS CAN BUS WITH ANALOGUE SUPPORT BUILT-IN IMMOBILIZATION CIRCUIT (NO/NC) BUILT-IN ACCELEROMETER BUILT-IN RF INTERFACE CONFIGURATION VIA PC POWER ANALOG OR SEQUENTIAL OUTPUT FOR DIRECTIONAL LIGHTS ALARM HISTORY MONTHLY FIRMWARE UPDATES SMS NOTIFICATION, VOICE CALLING
Similar documents
Car amplifier Audison LRx 4.1k
consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address
More informationtRIMILL VC 2314
Fork-type milling heads F4M/F5M 40 kW, 360 Nm, 10 000 rpm, HSK 100 Fork-type milling head T21M
More information