Front/Rear Axle Differential Assembly

GROUP 10: FRONT AXLE
The Lock Right Locker allows you
to keep your hands on the wheel
and your mind on the terrain...
Lockout Hubs Save wear and tear on your front axle. Limited lifetime warranty.
New Superwinch
Lockout Hubs
•Fits WC 3/4 Ton, 1 Ton
PW, WC 1 1/2 Ton (6X6),
M-37 $159
•Dana44 W100 & W200
$165
Lock Right Differential Locker
These kits replace the differential spider
gears with a ratcheting assembly that
transfers torque in a reversed fashion
from normal differentials. Lock Right
works automatically, so you can keep
your hands on the wheel and your mind
on the terrain. Because your ring and
pinions are not disturbed during installation, no gear lash adjustments are
required. If you want to get a good grip
with both front or rear wheels the Lock
Right should do the job for you.
Fits Vehicle Type: D,E,F $385
Selectro Lockout Hubs
•W-300-’58-68 $275
•W-300-’69-74 $275
•M715 Kaiser Jeep $275
FRONT AXLE SEAL & GASKET SETS
•M-37, Civ PW, WC 6x6 and WC 3/4 Ton Late (9 5/8” diff.) Front Axle Seal and
Gasket Set. Includes: inner axle oil seal (2), hub seals (2), pinion seal (4“ diameter), Knuckle felt set and gasket set includes all gaskets (except knuckle cap
& fl ange) $75
•Set 1/2 Ton WC & VC Front Axle Seal and Gasket Set. Includes: inner axle oil
seal (2), front hub seal (2) - specify VC 1/2 ton or WC 1/2 ton, differential pinion
seal 8 3/4” small ring gear (1), front knuckle felt set, front axle gasket set
includes all gaskets (except knuckle cap & fl ange) $65 Set
•3/4 Ton WC Early (8 3/4” diff.) Front Axle Seal and Gasket Set. Includes: inner
axle oil seal (2), hub seals (2), pinion seal ( 3.5“ diameter), knuckle felt set and
gasket set includes all gaskets (except knuckle cap & fl ange) $65 Set
Selectro Lockout Hubs
WC 1/2 Ton $275
New Selectro
Lockout Hubs
(not pictured)
Internal--non flanged.
Fits W100 1969-71 $325
Front/Rear Axle Differential Assembly
Typical Exploded Parts View
Most parts in stock for all models
Differential Gears Repair Kit
for all 3/4 & 1 ton Dodge Differentials, includes gaskets,
spider gears, side gears, pins,
etc. CC1057780 $65
Stud, Drive Flange
NEW [Ord # 7351088]
Fits Vehicle Type: A,B,C,D,E,F
Part # 10:916414 $2
Nut, Drive Flange Stud
NEW Fits Vehicle Type:
A,B,C,D,E,F Part # 10:125913 $1
Stud, Drive Pinion
Carrier, Conversion
NEW This stud is made specifically for converting small
early type axle housing to
accept large 9 5/8” differential.
Important: Diff. inspection
cover must be replaced with
late style.
Fits Vehicle Type: B,D
Part # 10:CCS9999 $5
44
Phone: 1-641-472-4665
|
dodge@vintagepowerwagons.com
|
Toll Free: 1-888-695-0578 (ORDERS ONLY)
GROUP 10: FRONT AXLE
Seal, Inner Axle
•NOS Fits Vehicle Type: A
Part # 10:599086 $7.50
•NOS [Ord #500057]
Fits Vehicle Type: B,C,D,E,F
Part # 10:924432 $7.50
Guide & Seal, Inner
Front Axle Shaft
NEW Fits Vehicle Type: G
Part # 10:1791964 $15
Seal, Guide Inner
Front Axle Shaft
NEW Fits Vehicle Type: H
Part # 10:1795508 $22
Guide, Inner Front
Axle Shaft
NEW Fits Vehicle Type: H
Part #10:1795509 $35
Gasket, Drive Flange
NEW [Ord # 7351041]
Fits Vehicle Type: B,C,D,E,F
Part # 10:915565 $2
Gasket, Drive Flange
NOS 1958-68 only. Fits
Vehicle Type: H
Part # 10:1795195 $2
Front Axle Assembly
Shim, Drive, Flange
NOS.005
•Fits Vehicle Type: A
Part # 10:915580 $4
•.007 Fits Vehicle Type: A
Part # 10:915581 $4
•NOS .020
Fits Vehicle Type: A
Part # 10:915582 $4
Front Axle Shafts
•VC 1/2 ton right assembly Bendix
CC598850 $150
•WC 1/2 ton right assembly Bendix
CC915114 $150
•WC 1/2 ton left assembly Bendix
CC915115 $150
•WC 3/4 & 6x6 right assembly Bendix
CC924244 $125
•WC 3/4 & 6x6 left assembly Bendix
C0924245 $125
•M-37 & PW right inner Tracta
CC1268430, CC1189230 $75
•M-37 left inner Tracta CC1268431 $75
PW left inner Tracta CC1189231 $75
•M37 & PW outer Tracta CC1189232 $75
•M37, PW, W300 Tracta joint(2 piece)
-not shown—USED $50, NOS $100
Retainer, Flange,
Oil Seal
NOS [Ord # 7348992]
Fits Vehicle Type:
B,C,D,E,F
Part # 10:925581
$12.50
Seal, Drive Pinion
— Large (approx.
4” diameter)
NEW [Ord # 7411822]
(9 5/8” large differential only).
Fits Vehicle Type: B,C,D,E,F
Part # 10:928114 $23.50
Retainer, Oil Seal Felt,
Flange Joint
USED [Ord # 7348991]
Fits Vehicle Type: B,C,D,E,F
Part # 10:924638 $2
Seal, Drive Pinion —
Small (approx. 3 1/2”
diameter) NOS (8 3/4 “
small differential).
Fits Vehicle Type: A,B
Part # 10:856864 $15
5.83 Ring & Pinion Gear Sets
•Small 8 1/4” type for early 3/4
ton WC models CC922848
$200
•Large 9 5/8”, 4.88 ring
and pinion set
$455 (call for availability)
Most parts in stock for most models
Typical Exploded Parts View
Inner Front Axle Shafts
•(not shown) NOS 1958-68 Dana 70 23
Spline. Fits Vehicle Type: H Right
Part # 10:1795502 $200
•Left Part # 10:1795503 $200
Shim, Steering Knuckle Flange
Bearing Cap — Upper
•NEW [Ord # 7348994].005 Fits Vehicle
Type: B,C,D,E,F Part # 10:924591 $3.50
•NOS .005 Half-Ton. Fits Vehicle Type: A
Part # 10:916855 $3.50
•NEW [Ord # 7349269] .007 Fits Vehicle
Type: B,C,D,E,F Part # 10:924592 $3.50
•NOS .007 Half-Ton. Fits Vehicle Type: A
Part # 10:916856 $3.50
•NEW [Ord # 7349268] .020
Fits Vehicle Type: B,C,D,E,F
Part # 10:924593 $3.50
•NOS .020 Half-Ton
Fits Vehicle Type: A
Part # 10:916857 $3.50
Phone: 1-641-472-4665
|
dodge@vintagepowerwagons.com
|
Toll Free: 1-888-695-0578 (ORDERS ONLY)
45
GROUP 10: FRONT AXLE
An Important Note Concerning Spicer/Dana 44 & Spicer/
Dana 70 Front Axle Parts: Prices may be subject to change.
Please call us for our most current price on these items.
Socket, Wheel Bearing
Adjusting Nut 2 9/16”
6-Sided
•NOS Fits Vehicle Type: H
Part # 10:WBNW002 $25
Cone Bearing, Bronze, Steering
Knuckle Flange - Upper
•NOS [Ord # 7705714] Fits Vehicle Type: D,E,F,G
3,500 lb. axle only),H Part # 10:1270396 $55
•NOS [Ord # 7705714] Fits Vehicle Type: B,C
Part # 10:924436 $55
Oil Seal, Neoprene, Front
Knuckle-Large
NOS 3,500 & 4,500 lb axle-only
Fits Vehicle Type: G,H
Part # 10:1795511 $39
CALL FOR AVAILABILITY
Bushing, Steering
Knuckle & Axle Housing
REP [Ord # 7351046] (4) required on front axle.
Fits Vehicle Type: B,D,C,E,F
Part # 10:924249 $28
Felt, Oil Seal, Front
Steering Knuckle
NOS 3,500 & 4,500 lb axle-only.
Fits Vehicle Type: G,H
Part # 10:1795514 $8
Socket, Wheel Bearing
Adjusting Nut 2 9/16”
8-Sided NEW Fits 3/4” drive.
Fits Vehicle Type: A,B,C,D,E,F
Part # 10:WBNW001 $49
Felt, Oil Seal, Front
Steering Knuckle
NOS 3,000 lb axle only.
Fits Vehicle Type: G
Part # 10:1791960 $8
Cup, Bearing, Steering
Knuckle Lower/Upper
•NEW Fits Vehicle Type: A
Part # 10:598837 $9.50
•NEW Fits Vehicle Type: B,C,D,E,F,G
Part # 10:927013 $12.50
Gasket, Steering
Knuckle Flange
•NEW[Ord # 7348989]
Fits Vehicle Type: B,C,D,E,F
Part # 10:924634 $5
•NEW Fits Vehicle Type: A
Part # 10:915088 $5
Cone Bearing, Steering
Knuckle Flange - Lower
•NEW Fits Vehicle Type: A
Part #10:598838 $15.50
•NEW [Ord # 705436] Fits Vehicle Type:
B,C,D,E,F,G (G-except 3000 lb axle),H
Part # 10:927014 $22.50
Bushing, Upper Steering
Knuckle Pivot-Keyed
NOS 3,000 lb. axle only (1969-71).
Fits Vehicle Type: G
Part # 10:1924416 $45
Bushing, Upper Steering
Knuckle Pivot-Splined
NOS 3,000 lb. axle only (1959-68).
Fits Vehicle Type: G Part # 10:2511521 $45
Phone: 1-641-472-4665
Cone Bearing, Bronze,
Steering Knuckle
Flange—Upper, Half-Ton
NOS Fits Vehicle Type: A
Part # 10:916060 $22.50
Gasket, Steering Knuckle,
Bearing Cap—Lower
NEW [Ord # 7348988] Fits Vehicle
Type: B,C,D,E,F
Part # 10:924594 $1.50
Cup, Bearing, Steering
Knuckle
NEW 3,000 lb. axle only.
Fits Vehicle Type: G
Part # 10:1793515 $6.50
Bushing, Steering
Knuckle — Half Ton
REP (2) required.
Fits Vehicle Type: A
Part # 10:915579 $28
Bushing, Steering Knuckle
NEW Fits Vehicle Type: H
Part # 10:1795578 $35
Retainer, Oil Seal Front
Steering Knuckle
NOS 3,000 lb axle only (4)
required. Fits Vehicle Type: G
Part # 10:1791958 $5
Retainer,Oil Seal, Front Steering Knuckle
NOS 3,500 & 4,500 lb. axle only (4) required.
Fits Vehicle Type: G,H Part # 10:1795512 $5
46
Oil Seal, Neoprene,
Front Knuckle—Small
NOS 3,000 lb axle only; (2)
required. Fits Vehicle Type: G
Part # 10:1791957 $15
Axle Housing Cover Gaskets
•Large—NOS B-(large differential
only). Fits Vehicle Type: B,C
Part # 10:929879 $7.50
•Small—NOS B-(small differential
only). Fits Vehicle Type: A,B
Part # 10:915098 $7.50
•Drive Pinion Carrier Gaskets
—Large Differential
NOS [Ord # 7411818B]-(large differential only). Fits Vehicle Type:
B,C,D,E,F Part # 10:929877 $7.50
•Small Differential—NOS B-(small
differential only). Fits Vehicle
Type: A,B Part # 10:952554 $7.50
|
Bushing, Steering Knuckle
NEW Fits Vehicle Type: G
Part # 10:1791706 $28
dodge@vintagepowerwagons.com
|
Cone, Bearing, Lower Steering Knuckle
NEW 3,000 lb. axle only.
Fits Vehicle Type: G
Part # 10:1793514 $16
Toll Free: 1-888-695-0578 (ORDERS ONLY)