Setup Guide - Sleep Number

4.
Plug the Firmness Control™ system into
a working outlet or surge protector.
5.
The SleepIQ™ app will
prompt you to link your bed.
8.
The SleepIQ™ app will complete
several processes.
9.
The five LED lights above the door on the back of the Firmness Control™
system will blink and flash during the connection process shown in the step
above. This may take up to 10 minutes.* Five solid LED lights indicate you are
connected to your home Wi-Fi network. NOTE: If the second light from the
left continues to blink, this is normal and you may proceed.
Setup Guide
for use with an iOS Device
Before assembling your new SLEEP NUMBER® bed, set up your new SleepIQ™
system. It will take approximately 10-20 minutes for you to set up your
SleepIQ™ system. If you have any questions, please call us at 888-484-9263.
What you’ll need:
• An iPhone® 4S, iPad® 3, iPad mini™ or iPod touch® 5G mobile device,
or newer version compatible with iOS 6 or later
• An active SleepIQ™ account
• The SleepIQ™ app from the App Store
• Your home Wi-Fi network name and password (case-sensitive)
• Locate the box labeled “Firmness Control™ system with SleepIQ™
technology” and identify each of the following components:
SleepIQ™ Firmness Control™ system, power cord, remote, batteries.
(A SleepIQ™ USB flash drive is included, but not needed for iOS
installation.) Set the remote and batteries aside for now. The remote
will be activated during mattress assembly.
6.
*After 10 minutes, if any lights (other than the second light from the left)
remain unlit or continue to blink, visit sleepnumber.com/chat to chat with
one of our sleep professionals, review the FAQs at
sleepnumber.com/customer-service/sleepiq-faq or call us at 888-484-9263.
Select your bed from
the list and choose Next.
Connecting your Firmness Control™
system to your home Wi-Fi network
1.
Turn on your iOS device’s Bluetooth.
2.
Ensure that the SleepIQ™
Firmness Control™ system is NOT
plugged into a power source.
3.
Open the SleepIQ™ app on your iOS
device and log in with the SleepIQ™
account information you previously
set up at sleepiq.sleepnumber.com.
10.Use your SLEEP NUMBER® bed assembly guide and SLEEP NUMBER®
7.
Select the home Wi-Fi network
name you wish to use with your
Firmness Control™ system and
choose Next. Enter your home
Wi-Fi network password.
remote to complete assembly of your bed. NOTE: If your Sleep Number
bed is already assembled, proceed with the guided set-up on your
Sleep Number remote.
©2014 Select Comfort 7/14
3.
Setup Guide
for use with a personal computer
Insert the SleepIQ™ USB flash drive into your computer.
9.
Plug the Firmness Control™ system into a working outlet or surge protector.
10.The five LED lights above the door on the back of the Firmness Control™
system will blink and flash during the connection process. This may take
up to 10 minutes.* Five solid LED lights indicate you are connected to your
home Wi-Fi network. NOTE: If the second light from the left continues to
blink, this is normal and you may proceed.
4.Select Add to enter your home Wi-Fi network name and password,
then select Save.
Before assembling your new SLEEP NUMBER® bed, set up your new SleepIQ™
system. It will take approximately 10-20 minutes for you to set up your
SleepIQ™ system. If you have any questions, please call us at 888-484-9263.
What you’ll need:
*After 10 minutes, if any lights (other than the second light from the left)
remain unlit or continue to blink, visit sleepnumber.com/chat to chat with
one of our sleep professionals, review the FAQs at
sleepnumber.com/customer-service/sleepiq-faq or call us at 888-484-9263.
• A computer with USB port
• An active SleepIQ™ account
• A compatible browser such as Google Chrome 4, Safari,® Internet
Explorer 9, Firefox® 7 or later
• Your home Wi-Fi network name and password (case-sensitive)
• Locate the box labeled “Firmness Control™ system with SleepIQ™
technology” and identify each of the following components:
SleepIQ™ Firmness Control™ system, power cord, SleepIQ™ USB
flash drive, remote, batteries. Set the remote and batteries aside
for now. The remote will be activated during mattress assembly.
Transferring your home Wi-Fi network information to the
Firmness Control™ system
5.
Click on the USB icon to save the “bam-init” file to the USB flash drive.
(DO NOT rename the file.)
11.Press on the back of the Firmness Control™ system near the USB flash drive
as you carefully remove the USB flash drive. Close the small door on the
Firmness Control™ system.
6.
Save this file to your computer’s USB drive. Click to Save. Safely remove the
USB flash drive from your computer.
1.
Log in to your SleepIQ™ account with the SleepIQ™ account information
you previously set up at sleepiq.sleepnumber.com.
7.
Ensure that the Firmness Control™ system is NOT plugged into a power source.
2.
Click on the Menu option in the upper right corner and select General.
8.
Open the door on the back of the Firmness Control™ system and insert the
USB flash drive into the USB port.
12.Use your SLEEP NUMBER® bed assembly guide and SLEEP NUMBER®
remote to complete assembly of your bed. NOTE: If your Sleep Number
bed is already assembled, proceed with the guided set-up on your
Sleep Number remote.
©2014 Select Comfort 7/14
120391