Ophus Auction Services

Ophus Auction Service
Joe Pruys Farm Auction
Saturday, June 14th, 2014
34557 Cotton Wood Rd, Mile Marker 24 on Hwy. 232 North of Havre, Mt.
Register For Bidders Numbers At 9 a.m. Auction Starts At 10 a.m.
COMBINE & GRAIN HANDLING
RESTORED TRACTORS
• Westfield 7X31 auger, 5 Hp
electric motor.
• (2) Westfield 6 inch Hyd.
tailgate augers .
1944 John Deere A new 1949 McCormick W-4
1954 McCormick Diesel
standard tractor, 4 Cyl 400 tractor, PTO, 1 Hyd,
tires, 2 Hitch, narrow
front, hand start.
gas, PTO, pulley drive. Torque Amp doesn’t work.
These tractors are owned & restored by neighbor Russell Rismon.
406-265-2787 They look great.
SEEDING & TILLAGE
• Clyde 40 Ft front hitch, (2) caster wheels.
• (2) - John Deere 12 Ft.
LZB double disk drills, 7
inch spacing spoked steel
packers, single hitches.
• 59 Ft. John Deere 1650
chisel plow, 5 section, 1
¼ inch shanks, very nice
Degelman mounted
harrows.
(4) - John Deere 9400
hoe drills, 12 inch
spacing rubber packers,
rock guards, single
hitches stored inside
very nice.
• DMI 1,000 gallon liquid
Fertilizer tow between cart,
has 4 wheels.
• Frigstead Force 5 tow
between air cart, Hyd. fan,
21.5-16.1 tires.
• 43 Ft John Deere 1610
chisel plow, 1 ¼ inch shanks,
anhydrous, liquid fertilizer,
very nice Degelman
mounted harrows.
• 28 Ft. IH 490 disk, 21 inch
disks, Hyd. wing fold, very
nice shape
• 32 Ft. Geysler chisel plow,
Hyd. wing lift, center rock
shaft, Morris mounted
harrows.
• 19 Ft. Geysler chisel plow,
no wing lift.
• (24) - New Geysler chisel
plow shanks.
• (6) - John Deere 500 rod
weeders, all tires are up.
• Moline 3 bottom plow.
• 17 Ft. Graham chisel plow,
Hyd. lift.
• 15 Ft. Graham chisel plow,
Hyd. lift.
• (6) - sections of drag
harrows.
• 9 Ft. McCormick Deering
cultivator.
• (4) - 14 Ft. CC cultivators.
• (2) - Moline 8 Ft. one ways.
• (150) - 50 degree, 16 inch
clipped wing chisel plow
shovels.
TRAILERS
• 1973 Maverick goose
neck 20 Ft trailer, tandem
axle, aluminum deck
tread plate floor, has side
boards & cattle rack.
• 1995 Top Three brand
18 Ft bumper pull 7,000 #
tandem axle car hauling
trailer, metal deck plate,
ramps.
• 1973 Greytak 16 Ft.
bumper pull horse trailer,
tandem axle, 5 Ft. wide.
SPRAYERS
• 1966 GMC 4X4 pickup, 454
engine, 4 speed, flat bed,
newer 1 ton dually rear end,
sells with a 80 Ft NYB mid
mount boom sprayer, 8 Hp
Honda electric start, auto
rate controller, Hyd tip lift,
triple nozzles.
• 1998 Brandt QF 1,000 pull
type sprayer, 100 Ft., wind
cones, 1,000 Gal tank,
Homemade rear boom
sprayer, 300 gal tank, 8 Hp
Briggs electric start, hose
reel.
• John Deere 3 Pt. 8 Ft. rear
blade with tail wheel.
• 6 Ft. Bush Hog 3 Pt. rotary
mower, has seen a some
rocks
• Hyd. drive 3 Pt. wire roller.
• Hyd. drive winch 3 Pt.
mounted, ½ inch cable.
• Moline 3 Pt. post hole
auger, 12 & 8 inch auger.
• 3 Point Dakon 8 Ft. chisel
plow.
3 PT. EQUIP.
• 1978 Volkswagen Rabbit
diesel car, 325,000 miles.
• 2000 Suzuki Quad 500
4X4 ATV, 6,592 miles, front
winch, snow plow.
• 8 Hp. Briggs electric start
air compressor.
• 23 Ft. metal building on
skids.
• Old potbellied stove.
• ¼ sack cement mixer,
electric motor.
• Rum lick tank.
• Homemade utility trailer.
• 1,600 Gal. poly tank.
• 1,000 Gal. galvanized water
tank.
• 1938 McCormick Deering
No. 31 pull type combine.
• Westfield 7X31 auger,
16 Hp Briggs electric start
engine, Hyd. transport kit,
Hyd. lift.
2010 John Deere 9770 STS
combine, straw chopper, Pro
Drive, 800/70R-38 bar tires,
28L-26 steering tires, 684
engine Hr. 511 separator Hr.,
John Deere 936 D draper
header with for & aft pickup
reel, and transport kit, (combine & header could be sold
separately.) WOW they are NICE.
EVERYTHING ELSE
• 1966 GMC pickup long
box, good shape.
• 3 inch Briggs 2 inch water
pump.
• 70 Gal. premix tank.
• Premix & injector tanks.
• Homemade flatbed pickup
box trailer.
• (2)- New 4X26 inch Hyd.
Cylinders.
• Motorized Rigid pipe
threader.
• Some 6 inch treated wood
drive posts.
• IH model A tractor engine
rebuilt.
• 500 gal. fuel tank.
• 11 Hp. Powermate 5,000
watt generator new in the
box.
• (10)- Metal Gopher Bait
Stations.
• 1966 GMC V-6 engine.
• 1956 Chevy 264 V-8 rebuilt
engine.
• Vector 6 Hp. walk behind
weed whacker.
• Shaver HD 10 Hyd. post
pounder.
• Collectible Pennzoil oval
sign with frame.
• Eden pure model 1,000 XL
infrared heater.
• 1,500 Gal fuel tank.
TRACTORS
1973 John Deere John
Deere 4630 tractor, cab
air heat radio,1,370
Hr. on a new 150 Hp
diesel engine, 8 speed,
1,000 PTO, Diff lock,
new style step, sells
with a JD 158 loader,
7 Ft. bucket 7 grapple,
20.8R—38 duals, 7,860
Hr. good tractor There
is also a 9 Ft. dozer that
fit this tractor and a 8
Ft. bucket.
• 1951 Minneapolis
Moline U tractor, 4 Cyl
gas, 5 speed, PTO, belt
pulley drive, sells with
a homemade dozer &
a Johnson workhorse
loader, runs well.
GRADER, MOWER
& ROCK PICKERS
TRUCKS & PICKUPS
• 1979 Chevy 1 ton
4X4 pickup, newer 350
engine, 4 speed, service
body, nice paint, 200 Gal
fuel tank with air pressure
flow.
• 1929 Chevy truck, 6
Cyl, for parts or yard
ornament.
• 1971 IH 1700 IHC truck,
fresh 392 engine, 5 & 2
speed, 16 Ft box & hoist
with roll tarp.
1980 Chevy C-70 truck,
fresh rebuilt 427, 5 & 2
speed, air brakes, tilt
hood,16 Ft box & hoist
with roll tarp, electric
tailgate, truck looks
good and runs great.
• 1949 Chevy 6400 truck,
5 window cab, 1954 261
series 1 engine, 4 speed,
13 Ft box & hoist.
• 1955 Jeep 4X4 Pickup,
283 Chevy engine, 3 spd.
1979 Ford 350 4X4
pickup, 2,000 miles on a
rebuilt 460 engine out of
a 1973 Mercury, 4 speed
& 2 speed, 170,068
miles, nice shape, great
tires & seat.
1959 Chevy ½ ton fleet
side pickup, 4X2, 6 Cyl.
engine, 4 speed.
• Millermatic 200 Amp Wire
Welder.
• Thermal Dynamics Cutmaster 75 plasma cutter
with cart.
• Century AC- DC 295 amp
welder.
• Smithy Granite 1340 metal
lathe & mill, 6 inch swing, 36
inch table, cabinet mounted.
• Greytak built Hyd. press.
• Champion 5 HP. two stage
air compressor, 120 gal.
horizontal tank.
• Oxygen Acetylene torch.
• New 3 ton chain hoist.
• 44 ton air jack.
• Transmission jack.
• Cherry picker.
• (12) - Lawson fastener
• Cheetah tire bead sealer.
drawers.
• 5 Hp. pressure washer.
• Thorsen socket set to 2
• Small shop air compressor.
inch..
• Stemco seal driver.
• Engine stand.
• Milwaukee sawsall.
• 14- wheel sockets.
• Tiger Tool bearing cup
• 600 # torque wrench.
installer.
Printed by The Mountaineer
• ½ Hp. bench grinder.
Big Sandy, Montana
• Jet drill press.
Phone: (406) 378-2176
• 10 Ton porta-power.
e-mail: bsmnews@mtintouch.net
• Makita metal chop saw.
• Hyd. gear puller.
• (4) - jack stands, two are For complete listings,
heavy duty.
updates and pictures go to
• New shop vac.
• (2) - Air greasers.
• Large sized wrench set.
SHOP TOOLS & EQUIPMENT
Hy Grade 14 Ft. pull
type grader, Hyd. tilt,
Hyd. angle, flip down
ends, weight package,
Like new.
1980s Bush Hog 2720
rotary 3 section mower,
Hyd. wing fold, 1,000
RPM PTO, airless tires,
good shape.
Degelman R 570H rock
picker, Hyd. reel, Hi lift,
very nice condition.
• 5 Ft. scoop type rock
picker.
www.OphusAuctions.com
OPHUS AUCTION SERVICE
Shane & Gwen Ophus, Owners • Shane, Blaine & Taylor, Auctioneers
Mason Ophus , Clerk
FOR MORE INFORMATION, CALL SHANE @ (406) 788-6662
Auctioneers Note:
This will be a fun auction. Joe is well liked. Joe has leased out
his farm. He is very meticulous about his farming & machinery.
Thanks, Shane