1963-77 Mopar Muscle Pre-Cut Ready to Install Kits Year • Make

Transcription

1963-77
1963-77
Mopar
Muscle
Mopar
Muscle
A-Body, B-Body, C-Body, E-Body
Automotive Thermal Acoustic Insulation
Roof to Road Solutions to Control Automotive Noise, Vibration and Heat
•Reduce Road Noise
•Reduce Exhaust Harmonics
•Eliminate Mechanical Noise
•Stop Body Panel Vibration
•Reduce Radiated & Reflected Heat
•Stop Audio System Vibration
Pre-Cut Ready to Install Kits
Year • Make • Model Specific
The Coolest Cars Have QuietRIDE Inside! ™
Kits are available for these Vehicles
See AcoustiTrunk Catalog
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT,
CHRYSLER and related logos, vehicle model names and trade
dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
Roof Kit
Roof & Quarter Panels
above beltline. (Sold
Separately)
Trunk Floor Kit
Trunk Floor & Tire Well
Firewall Insulator
Fits under dash against the
firewall bulkhead.
Kit
Kits are available for these Vehicles
See AcoustiHood Catalog
All Panels below the beltline
including Package Tray, Seat
Divider, Rear Wheel Wells,
Fenders, Rear Quarters and
Tail Panels (As Required)
Floor Kit
Door Kit
Front Floor, Rear Floor,
Transmission
Hump/ Driveline
All Doors
Cowl Kit
Body Panel
Panels between the
firewall and front door of
the vehicle.
Everything in One Box to Do the Job Right!
Pre-Cut, Ready To install Kits are Year, Make and Model
Specific and include:
•Dynamat Xtreme
•Heat Shield Barrier Insulation
•Spray Adhesive •Seam Tape
•Illustrated Instructions
9-1-2014
For more information contact us at: info@quietride.com
©2003-15 •Prices Subject to Change Without Notice
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
1963-77
Mopar Muscle
Pre Cut Kits Ready to Install
Roof to Road Solutions to Control Automotive Noise, Vibration and Heat
Introducing a multi-stage, automotive insulation
and sound damping system to give Mopar cars
the “quiet riding comfort” found in today’s
new cars. AcoustiSHIELD kits are designed on
cur-rent “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration
and heat in the passenger cabin. Kits are pre-cut
and come with easy-to-follow installation instructions-----everything you need to do the job right.
Turn Your Mopar into “Quiet Riding Comfort”
Stage 1
Sound Damper Pads
The first stage consists of pre-trimmed, self-adhesive, Sound
Damper Pads, bonded to strategically located trouble spots on
the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed
instructions which are included in the kit.
Stage 2
Heat Absorber/Barrier Panels
The second stage uses a high-tech absorber/barrier material,
bonded to the body panels, to both sound deaden and insulate
the vehicle from radiant heat penetration from the engine and
road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions.
Kits Include:
• Stage 1 Pre-Sized Sound Damper Pads
• Stage 2 Pre-Trimmed Heat Absorber / Barrier
Panels, Spray Adhesive and Sealing Tape
• Complete Illustrated Installation Instruction
Dealer program available. For more information
contact us at info@quietride.com
©2003-15 Quiet Ride Solutions Prices Subject to Change Without Notice
Mopar Cars A-B-E
Pre Cut Kits Ready to Install
Product Application Codes and Price Sheet
MOPAR A-Body Cars 1963-1976
Dodge Dart, Duster, Swinger-Plymouth Valiant and Barracuda
Inventory # Description
Price
1963-66 MOPAR A-Body Coupe
MOPAR-A 6366-CAK
1963-66 Mopar A-Body Coupe Complete Kit
762
MOPAR-A 6366-CBPK
1963-66 Mopar A-Body Coupe Body Panel Kit
143
MOPAR-A 6366-CCK
1963-66 Mopar A-Body Coupe Cowl Kit
57
MOPAR-A 6366-CFK
1963-66 Mopar A-Body Coupe Floor Kit
256
MOPAR-A 6366-CRK
1963-66 Mopar A-Body Coupe Roof Kit
143
MOPAR-A 6366-CTK
1963-66 Mopar A-Body Coupe Trunk Kit
143
ASU-DDBIK-2
Universal 2 Door Damper Kit
65
Price
1967-69 MOPAR-A Body Coupe
MOPAR-A 6769-CAK
1967-1969 Mopar A Body Coupe Complete Kit
762
MOPAR-A 6769-CBPK
1967-1969 Mopar A Body Coupe Body Panel Kit
143
MOPAR-A 6769-CCK
1967-1969 Mopar A Body Coupe Cowl Kit
57
MOPAR-A 6769-CFK
1967-1969 Mopar A Body Coupe Floor Kit
256
MOPAR-A 6769-CRK
1967-1969 Mopar A Body Coupe Roof Kit
143
MOPAR-A 6769-CTK
1967-1969 Mopar A Body Coupe Trunk Kit
143
ASU-DDBIK-2
65
1967-69 MOPAR A Body Convertible
1963-66 MOPAR-A Body Convertible
MOPAR-A 6366-CVAK
1963-66 Mopar A-Body Convert Complete Kit
628
MOPAR-A 6366-CVBPK
1963-66 Mopar A-Body Convert Body Panel Kit
143
MOPAR-A 6366-CVCK
1963-66 Mopar A-Body Convert Cowl Kit
57
MOPAR-A 6366-CVFK
1963-66 Mopar A-Body Convert Floor Kit
256
MOPAR-A 6366-CVTK
1963-66 Mopar A-Body Convert Trunk Kit
143
ASU-DDBIK-2
65
MOPAR-A 6769-CVAK
1967-1969 Mopar A Body Convert Complete Kit
628
MOPAR-A 6769-CVBPK
1967-1969 Mopar A Body Convert Body Panel Kit
143
MOPAR-A 6769-CVCK
1967-1969 Mopar A Body Convert Cowl Kit
57
MOPAR-A 6769-CVFK
1967-1969 Mopar A Body Convert Floor Kit
256
MOPAR-A 6769-CVTK
1967-1969 Mopar A Body Convert Trunk Kit
143
ASU-DDBIK-2
65
1967-69 MOPAR-A Body Fastback
1963-66 MOPAR-A Body Fastback
MOPAR-A 6366-FBAK
1963-66 Mopar A-Body FB Complete Kit
778
MOPAR-A 6366-FBBPK
1963-66 Mopar A-Body FB Body Panel Kit
160
MOPAR-A 6366-FBCK
1963-66 Mopar A-Body FB Cowl Kit
57
MOPAR-A 6366-FBFK
1963-66 Mopar A-Body FB Floor Kit
256
MOPAR-A 6366-FBRK
1963-66 Mopar A-Body FB Roofl Kit
143
MOPAR-A 6366-FBTK
1963-66 Mopar A-Body FB Trunk Kit
143
ASU-DDBIK-2
65
1963-66 MOPAR-A Body Sedan
MOPAR-A 6769-FBAK
1967-1969 Mopar A-Body FB Complete Kit
778
MOPAR-A 6769-FBBPK
1967-1969 Mopar A-Body FB Body Panel Kit
160
MOPAR-A 6769-FBCK
1967-1969 Mopar A-Body FB Cowl Kit
57
MOPAR-A 6769-FBFK
1967-1969 Mopar A-Body FB Floor Kit
256
MOPAR-A 6769-FBRK
1967-1969 Mopar A-Body FB Roof Kit
143
MOPAR-A 6769-FBTK
1967-1969 Mopar A-Body FB Trunk Kit
143
ASU-DDBIK-2
65
MOPAR-A 6769-SAK
1967-1969 Mopar A Body Sedan Complete Kit
808
MOPAR-A 6769-SBPK
1967-1969 Mopar A Body Sedan Body Panel Kit
128
MOPAR-A 6769-SCK
1967-1969 Mopar A Body Sedan Cowl Kit
57
MOPAR-A 6769-SFK
1967-1969 Mopar A Body Sedan Floor Insulation Kit
256
143
MOPAR-A 6769-SRK
1967-1969 Mopar A Body Sedan Roof Kit
143
143
MOPAR-A 6769-STK
1967-1969 Mopar A Body Sedan Trunk Kit
143
128
ASU-DDBIK-4
128
MOPAR-A 6366-SAK
1963-66 Mopar A-Body Sedan Complete Kit
808
MOPAR-A 6366-SBPK
1963-66 Mopar A-Body Sedan Body Panel Kit
128
MOPAR-A 6366-SCK
1963-66 Mopar A-Body Sedan Cowl Kit
57
MOPAR-A 6366-SFK
1963-66 Mopar A-Body Sedan Floor Kit
256
MOPAR-A 6366-SRK
1963-66 Mopar A-Body Sedan Roof Kit
MOPAR-A 6366-STK
1963-66 Mopar A-Body Sedan Trunk Kit
ASU-DDBIK-4
Other MOPAR 1963-66 A-Body Products (Sold Separately)
MOPAR-A 6366-C
1963-66 Mopar A-Body Firewall
149
MOPAR-A 6769-C
149
MOPAR-A 6366-PKG
1963-66 Mopar A-Body Package Tray
133
MOPAR-A 6769-PKG
133
MOPAR-A 6366-CSP
1963-66 Mopar A-Body Cowl Side Panels
114
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
For more information visit: www.quietride.com or contact us at info@quietride.com
Price
1970-76 MOPAR-A Body Coupe
Price
1968-70 MOPAR B-Body Sedan
MOPAR-A 7076-CAK
1970-1976 Mopar A Body Coupe Complete Kit
803
MOPAR-A 7076-CBPK
1970-1976 Mopar A Body Coupe Body Panel Kit
143
MOPAR-B 6870-SBPK
1968-70 Mopar B-Body Sedan Body Panel Kit
128
MOPAR-A 7076-CCK
1970-1976 Mopar A Body Coupe Cowl Kit
99
MOPAR-B 6870-SCK
1968-70 Mopar B-Body Sedan Cowl Kit
57
MOPAR-A 7076-CFK
1970-1976 Mopar A Body Coupe Floor Kit
256
MOPAR-B 6870-SFK
1968-70 Mopar B-Body Sedan Floor Kit
256
MOPAR-A 7076-CRK
1970-1976 Mopar A Body Coupe Roof Kit
143
MOPAR-B 6870-SRK
1968-70 Mopar B-Body Sedan Roof Kit
143
MOPAR-A 7076-CTK
1970-1976 Mopar A Body Coupe Trunk Kit
143
MOPAR-B 6870-STK
1968-70 Mopar B-Body Sedan Trunk Floor Kit
143
ASU-DDBIK-2
65
ASU-DDBIK-4
128
1970-76 MOPAR-A Body Convertible
MOPAR-B 6870-SAK
1968-70 Mopar B-Body Sedan Complete Kit
808
MOPAR-A 7076-CVAK
1970-1976 Mopar A Body Convert Complete Kit
669
MOPAR-A 7076-CVBPK
1970-1976 Mopar A Body Convert Body Panel Kit
143
MOPAR-A 7076-CVCK
1970-1976 Mopar A Body Convert Cowl Kit
99
MOPAR-A 7076-CVFK
1970-1976 Mopar A Body Convert Floor Kit
256
MOPAR-A 7076-CVTK
1970-1976 Mopar A Body Convert Trunk Kit
143
ASU-DDBIK-2
65
MOPAR-B 6870-C
1968-70 Mopar B-Body Firewall
133
1971-74 MOPAR-B Body Coupe
MOPAR-B 7174-CAK
1971-1974 Mopar B-Body Coupe Complete Kit
762
MOPAR-B 7174-CBPK
1971-1974 Mopar B-Body Coupe Body Panel Kit
143
MOPAR-B 7174-CCK
1971-1974 Mopar B-Body Coupe Cowl Kit
57
MOPAR-B 7174-CFK
1971-1974 Mopar B-Body Coupe Floor Kit
256
MOPAR-B 7174-CRK
1971-1974 Mopar B-Body Coupe Roof Kit
143
MOPAR-A 7076-SAK
1970-1976 Mopar A Body Sedan Complete Kit
849
MOPAR-B 7174-CTK
1971-1974 Mopar B-Body Coupe Trunk Kit
143
MOPAR-A 7076-SBPK
1970-1976 Mopar A Body Sedan Body Panel Kit
128
ASU-DDBIK-2
65
MOPAR-A 7076-SCK
1970-1976 Mopar A Body Sedan Cowl Kit
99
MOPAR-A 7076-SFK
1970-1976 Mopar A Body Sedan Floor Kit
256
MOPAR-A 7076-SRK
1970-1976 Mopar A Body Sedan Roof Kit
143
MOPAR-A 7076-STK
1970-1976 Mopar A Body Sedan Trunk Kit
143
ASU-DDBIK-4
128
1971-74 MOPAR-B Body Sedan
MOPAR-B 7174-SAK
808
MOPAR-B 7174-SBPK
128
MOPAR-B 7174-SCK
57
MOPAR-B 7174-SFK
256
MOPAR-B 7174-SRK
143
MOPAR-A 7076-C
149
MOPAR-B 7174-STK
1971-74 Mopar B-Body Sedan Trunk Kit
143
MOPAR-A 7076-PKG
88
ASU-DDBIK-4
128
MOPAR-A 7076-SD
1970-76 Mopar A-Body Seat Divider
89
MOPAR-B Body Cars 1968-1977
Charger, Cornet, Superbee, GTX, Belevedere, Road Runner
1968-70 MOPAR B-Body Coupe
MOPAR-B 7174-C
149
MOPAR-B 7174-PKG
1971-1974 Mopar B-Body Package Tray
68
MOPAR-B 7174-SD
1971-1974 Mopar B-Body Seat Divider
95
1975-77 MOPAR-B Body Coupe
MOPAR-B 6870-CAK
762
MOPAR-B 6870-CBPK
143
MOPAR-B 6870-CCK
1968-70 Mopar B-Body Coupe Cowl Insualtion Kit
57
MOPAR-B 7577-CBPK
143
MOPAR-B 7577-CCK
1975-1977 Mopar B-Body Coupe Cowl Kit
57
MOPAR-B 7577-CAK
763
MOPAR-B 6870-CFK
256
MOPAR-B 6870-CRK
143
MOPAR-B 7577-CFK
256
143
MOPAR-B 6870-CTK
143
MOPAR-B 7577-CRK
ASU-DDBIK-2
65
MOPAR-B 7577-CTK
143
ASU-DDBIK-2
65
1968-70 MOPAR B-Body Convertible
MOPAR-B 6870-CVAK
1968-70 Mopar B-Body Convert Complete Kit
628
MOPAR-B 6870-CVBPK
1968-70 Mopar B-Body Convert Body Panel Kit
143
MOPAR-B 6870-CVCK
1968-70 Mopar B-Body Convert Cowl Kit
57
MOPAR-B 6870-CVFK
1968-70 Mopar B-Body Convert Floor Kit
256
MOPAR-B 6870-CVTK
1968-70 Mopar B-Body Convert Trunk Kit
143
ASU-DDBIK-2
65
1975-77 MOPAR-B Body Sedan
MOPAR-B 7577-SAK
809
MOPAR-B 7577-SBPK
128
MOPAR-B 7577-SCK
57
MOPAR-B 7577-SFK
256
MOPAR-B 7577-SRK
143
MOPAR-B 7577-STK
1975-1977 Mopar B-Body Sedan Trunk Kit
143
ASU-DDBIK-4
128
MOPAR-B 7577-C
MOPAR E Body Cars 1970-1974
Challenger and Barracuda
1970-74 MOPAR-E Body Coupe
MOPAR-E 7074-CAK
1970-74 Mopar E-Body Coupe Complete Kit
762
MOPAR-E 7074-CBPK
1970-74 Mopar E-Body Coupe Body Panel Kit
143
MOPAR-E 7074-CCK
1970-74 Mopar E-Body Coupe Cowl Kit
57
MOPAR-E 7074-CFK
1970-74 Mopar E-Body Coupe Floor Kit
256
149
MOPAR-E 7074-CRK
1970-74 Mopar E-Body Coupe Roof Kit
143
1970-74 Mopar E-Body Coupe Trunk Kit
143
57
MOPAR-B 7577-PKG
1975-1977 Mopar B-Body Package Tray
68
MOPAR-E 7074-CTK
MOPAR-B 7577-SD
1975-1977 Mopar B-Body Seat Divider Panel
95
ASU-DDBIK-2
1970-74 MOPAR-E Body Convertible
MOPAR C Body Cars 1965-1968
Chrysler 300, Fury, Polara, Newport, New Yorker, Monaco
1965-68 MOPAR-C Body Coupe
MOPAR-C 6568-CAK
1965-1968 Mopar C-Body Coupe Complete Kit
803
MOPAR-C 6568-CBPK
1965-1968 Mopar C-Body Coupe Body Panel Kit
143
MOPAR-C 6568-CCK
1965-1968 Mopar C-Body Coupe Cowl Kit
99
MOPAR-C 6568-CFK
1965-1968 Mopar C-Body Coupe Floor Kit
256
MOPAR-C 6568-CRK
1965-1968 Mopar C-Body Coupe Roof Kit
143
MOPAR-C 6568-CTK
1965-1968 Mopar C-Body Coupe Trunk Kit
143
ASU-DDBIK-2
57
MOPAR-E 7074-CVAK
1970-74 Mopar E-Body Convert Complete Kit
628
MOPAR-E 7074-CVBPK
1970-74 Mopar E-Body Convert Body Panel Kit
143
MOPAR-E 7074-CVCK
1970-74 Mopar E-Body Convert Cowl Kit
57
MOPAR-E 7074-CVFK
1970-74 Mopar E-Body Convert Floor Kit
256
MOPAR-E 7074-CVTK
1970-74 Mopar E-Body Convert Trunk Kit
143
ASU-DDBIK-2
65
Other MOPAR E-Body Products (Sold Separately)
MOPAR-E 7074-C
1970-74 Mopar E-Body Car Firewall
149
1971-1972 Dodge Polara Package Tray
212
1071-71 Dodge Polara
1965-68 MOPAR-C Body Convertible
MOPAR-C 6568-CVAK
1965-1968 Mopar C-Body Convert Complete Kit
669
MOPAR-C 6568-CVBPK
1965-1968 Mopar C-Body Convert Body Panel Kit
143
MOPAR-C 6568-CVCK
1965-1968 Mopar C-Body Convert Cowl Kit
99
MOPAR-C 6568-CVFK
1965-1968 Mopar C-Body Convert Floor Kit
256
MOPAR-C 6568-CVTK
1965-1968 Mopar C-Body Convert Trunk Kit
143
ASU-DDBIK-2
57
DODGE 7172-PT
1965-68 MOPAR-C Body Sedan
MOPAR-C 6568-SAK
1965-1968 Mopar C-Body Sedan Complete Kit
849
MOPAR-C 6568-SBPK
1965-1968 Mopar C-Body Sedan Body Panel Kit
128
MOPAR-C 6568-SCK
1965-1968 Mopar C-Body Sedan Cowl Kit
99
MOPAR-C 6568-SFK
1965-1968 Mopar C-Body Sedan Floor Kit
256
MOPAR-C 6568-SRK
1965-1968 Mopar C-Body Sedan Roof Kit
143
MOPAR-C 6568-STK
1965-1968 Mopar C-Body Sedan Trunk Kit
143
ASU-DDBIK-4
128
Other MOPAR 1965-68 C-Body Products (Sold Separately)
MOPAR-C 6568-AC
1965-1968 Mopar C-Body Firewall (Factory AC)
149
MOPAR-C 6568-HC
1965-1968 Mopar C-Body Firewall (Heater only)
149
MOPAR-C 6568-CSD
1965-1968 Mopar C-Body Coupe Seat Divider
100
MOPAR-C 6568-CVSD
1965-1968 Mopar C-Body Convert Seat Divider
88
Complete AcoustiShield Insulation Kit
MOPARA 6366-CAK
Barracuda-Dart-Valiant
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
Complete kits include the
Door Damper/Barrier Kit
See Catalog
for other products available for
this vehicle including:
Cowl Panels
Firewall Insulator for this Vehicle
(Sold Searately)
MOPARA 6366-C
1963-66 MOPAR A-Body Convertible
MOPARA 6366-CVAK
Barracuda-Dart-Valiant
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6366-C
1963-66 MOPAR A-Body Sedan
MOPARA 6366-SAK
Dart-Valiant
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6366-C
Cowl Kit
MOPARA 6769-CAK
Dart-Demon-Swinger-Barracuda-Valiant
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6769-C
Cowl Kit
MOPARA 6769-CVAK
Dart-Demon-Swinger-Barracuda-Valiant
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6769-C
Cowl Kit
MOPARA 6769-SAK
Dart-Demon-Swinger-Valiant
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6769-C
1967-69 MOPAR A-Body Fast Back
MOPARA 6769-FBAK
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARA 6769-C
Cowl Kit
MOPARA 7076-CAK
Dart-Demon-Swinger--Duster-Scamp
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
Cowl Kit
MOPARA 7076-CVAK
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
Cowl Kit
MOPARA 7076-SAK
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
MOPARB 7076-CAK
Automotive Thermal Acoustic Insulation Charger-Coronet-Super Bee-Belevedere-GTX-Road Runner-Satellite
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARB 6870-C
Cowl Kit
MOPARB 7076-CVAK
Charger-Coronet-Belevedere-GTX-Road Runner-Satellite
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARB 6870-C
MOPARB 7076-SAK
Coronet-Belevedere
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARB 6870-C
Cowl Kit
MOPARB 7174-CAK
Charger-Super Bee-Coronet-GTX-Road Runner-Satellite-Sebring
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
Cowl Kit
MOPARB 7174-CVAK
Charger-Coronet-GTX-Road Runner-Satellite-Sebring
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
MOPARB 7174-SAK
Coronet-Satellite-Sebring
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
Cowl Kit
MOPARB 7577-CAK
Charger-Coronet-Road Runner-Satellite
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
Cowl Kit
MOPARB 7577-CVAK
Charger-Coronet-Road Runner-Satellite
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
MOPARB 7577-SAK
Coronet
Cowl Kit
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPAR xxxxxxx
(Sold Searately)
MOPAR xxxxx
1965-68 MOPAR C-Body Coupe
Cowl Kit
MOPARC 6568-CAK
Chrysler 300-New Yorker-Newport--Monaco-Polara-Fury-Sport Fury
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPARC-6568-HC
(Sold Searately)
MOPARC 6568-AC
1965-68 MOPAR C-Body Convertible
Cowl Kit
MOPARC 6568-CVAK
Chrysler 300-New Yorker-Newport-Polara-Fury-Sport Fury
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPARC-6568-HC
(Sold Searately)
MOPARC 6568-AC
1965-68 MOPAR C-Body Sedan
Cowl Kit
MOPARC 6568-SAK
Chrysler 300-New Yorker-Newport-Custom 880-Monaco-Polara-Fury
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
MOPARC-6568-HC
(Sold Searately)
MOPARC 6568-AC
1970-74 MOPAR E-Body Coupe
Cowl Kit
MOPARE 7074-CAK
Barracuda-’cuda-Challenger
Floor Kit
Roof Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARE 7074-C
1970-74 MOPAR E-Body Convertible
Cowl Kit
MOPARE 7074-CVAK
Barracuda-’cuda-Challenger
Floor Kit
Body Panel Kit
Trunk Kit
See Catalog
Cowl Panels
(Sold Searately)
MOPARE 7074-C
A Roof to Road Solution to Control
Passenger Cabin Noise, Vibration and Heat
TM
AcoustiSHIELD Product Description
AcoustiShield is a two-stage thermal acoustic automotive insulation
product designed to control Noise, Vibration and Heat—the three
major issues that affect passenger cabin comfort. Kits include pre-cut,
ready-to-install Dynamat Xtreme® damper pads and HeatShield
Barrier Insulation panels which are packaged separately for easy
installation. Kits come with uniquely illustrated installation sheets,
spray adhesive and seam tape.
Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor,
Doors and Body Panels, which includes the seat divider, package tray and
rear wheel wells. The installation of a complete AcoustiShield kit
typically will reduce passenger cabin noise by 12 to 17 decibels. To put
this in perspective, a 10-decibel reduction is a 50 percent reduction
in noise that the human ear can easily detect. Barrier insulation will
reduce radiant heat by as much as 25 degrees.
AcoustiShield is a Two-Stage Process
Stage-One of the AcoustiShield process is the application of
small pre-cut Dynamat Xtreme® damper pads and strips to auto
body sheet metal to greatly reduce the vibration and noise
produced by these panels from entering the passenger cabin.
Quick Link
Stage-Two of the AcoustiShield process is the application of
pre-cut HeatShield Barrier Insulation panels to the auto body sheet
metal to encapsulate any remaining vibration/noise and to
thermally insulate the vehicle.
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Expanded NVH Reference Information:
Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple
directions--including internal and external air-borne noise, structure-borne noise as well as
radiant heat. NVH factors to consider:
•Engine NVH travels back from the front of the vehicle through the firewall and cowl.
•Wheel well trunk and rear body panel NVH travels forward through the seat divider and
package tray panels.
•Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans.
•Rumbling performance exhaust systems and transmission/drive line harmonics also rise
through vehicle floor pans.
•Direct heat from the sun penetrates the roof of the vehicle.
All of these influences “Apex” in the middle of the passenger cabin at ear level.
Add the noise produced by the sound system; the air rushing through the vents from the
HVAC system; and a normal conversation builds into a “shouting match” between the driver
and passenger to overcome the “harmonic drone” of vehicle mechanics.
AcoustiShield Photo Gallery
Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.
Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.
Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.
Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.
Typical Body Panel Sound Dampening and Thermal Barrier Insulation.
Ford Motor Company
Trademarks
are used under license to
QuietRide Solutions LLC.
Made Right---Fit Right---Look Right
OEM Original Products
Firewall Insulator products are
pre-cut and ready to install with
standard OEM accessory and
mounting holes punched for
restoration applications. Each unit
has period correct insulation.
ABS Leather Grain Material
“Ultra High Definition”
Vinyl Rubber
Firewall Insulators are also
available without holes for
aftermarket HVAC systems and
Street Rod and Custom installs.
Street Rod Firewall Insulator
Direct Sheetmetal
Absolute Sheetmetal
Quick Link
ABS “Chicken Track” Material
Product Description—
ABS “Chicken Track Grain”
Early Ford Original Equipment Firewall Insulators
Production Period—FOMOCO: 1928 through 1948
Production Period--Some Early Mopar Vehicles
FOMOCO cars and trucks used a
unique “chicken track” texture on
their firewall insulator covers and
related products from 1928 through
1948. Quiet Ride has faithfully
reproduced this famous texture
and offers it exclusively on its ABS
molded firewall insulators and truck
headliners, cowl and door panels.
Each insulator product is molded
with an ABS material and readyto-install with Heat Shield Thermal
Barrier insulation, factory stock
accessory holes and mounting pin
locations punched.
Ford style steel mounting pins are
not included but are available for
separate purchase as needed.
Ford Motor Company
Trademarks
ABS Firewall Cover
Chicken Track Grain Material
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
Firewall Insulators can be ordered without holes for
custom applications.
ABS “Leather Grain”
Original Equipment Firewall Insulators
Production Period—GM and MOPAR: 1926 through 1976
ABS Firewall Cover
Most OEMs used a leather grained
firewall cover on their cars and
trucks from 1926 through 1965.
Each insulator product is molded
with ABS material and ready-toinstall with factory stock accessory
holes and mounting pin locations
punched.
Kits does not include mounting
pins. Quiet Ride has an assortment
of “universal” mounting pin styles
available as needed.
Mounting pins are not included but
are available for separate purchase as
needed.
Ford Motor Company
Trademarks
Leather Grain Material
accuracy.
“Ultra High Definition Vinyl Rubber“
for General Motors Cars and Ford Cars and Trucks
Production Period—GM: 1964 to present
Production Period—FOMOCO: 1964 to present
FOMOCO and General Motors
began using a rubber based firewall
material in 1964 with the
introduction of the Mustang,
Chevelle family and Camaro Cars.
Quiet Ride molds these products using a “Ultra High Definition” vinyl
rubber. It comes ready to install
with a Heat Shield Thermal Barrier
insulation pad. Factory stock accessory holes and mounting pin locations are punched.
Kits include appropriate period
mounting pins.
accuracy.
Ford Motor Company
Trademarks
Product Description—Street Rod Firewall Insulators
Direct Sheetmetal
Absolute Sheetmetal (formerly Bitchin Products)
Production Period--GM: 1936 through 1972
Street Rod Firewall Insulators are
based on the steel after-market
firewalls that are manufactured by
Direct Sheetmetal and Absolute
Sheetmetal (formerly Bitchin Products) to stop the heat and noise generated by large engine installed in
smaller, older vehicles. Each
insulator product is molded with
ABS Leather grain material to fit the Each Street Rod Firewall Insulator
product is molded from a steel
steel engine and transmission recess
“like a glove.” All street rod products mold provided by the manufacturer
to achieve contour and accuracy.
are year, make and model specific,
and come ready to install with a
double layer of Heat Shield Thermal
Barrier insulation pad.
There are no mounting holes or
accessory cut-outs so customers can
achieve that “smooth” look in the
engine bay and passenger
compartment.
Customer must decide method of
installation. Quiet Ride makes a
Street Rod mounting pin kit,
available separately.
Thermal Insulation Types
•General Motors Cars and Trucks
•Ford Cars and Trucks
•MOPAR Cars and Trucks
Black Fiberglass Insulation
Typically used in vehicles 1949 through 1977
•ABS Firewall Insulators
Heat Shield Barrier Insulation
Typically used in vehicles 1928-48 and
Vinyl Rubber Firewalls 1964-present
•Street Rods
•Custom Firewalls
Concours Show Quality
Authentically Correct---“Fit like a Glove”---Easy to Install
All QRS Products, Materials and Craftsmanship
Meet or Exceed OEM Quality Standards
No customer has ever reported losing judged points on our firewall products.
Firewall Insulators--A Historical Perspective
The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat
that is generated in the engine bay of the vehicle.
QRS manufactures more than 600 firewall products for antique, classic, custom and street rod
cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact
reproductions of OEM products.
Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil
impregnated cardboard cover in combination with a number of insulation materials. In 1964
General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to
a thin layer of “shody” insulation.
All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System
for accurate fitting. Each firewall cover is backed with period correct insulation which could
include a black fiberglass or HeatShield barrier insulation.
Firewall Colors and “Sheen”
Just a word about the “look” of your old firewall in comparison to a new one--you may may note
that the new firewall does not look the same as your original--because of the “sheen.” The
firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and
dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean
and sparkling fresh.
With few exceptions, firewall insulators were black when they came from the factory. There were
some exceptions in the General Motors product line from 1933 through 1941 in which the
firewall insulators were a “mocha brown” color. The firewall color would typically match the
color of your clutch, brake and accelerator pedal rubber pads.
6507 Pacific Avenue--Ste 334 Stockton, CA 95207
Order Line: 888-777-3410
Tech Line (209) 942-4777
Fax (209) 942-4476
www.quietride.com
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD” and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Fasteners
and Screws
Firewall Mounting Pin Options
For Older Cars and Trucks
American Cars and Trucks used a wide variety of mounting pins, clips, buttons and
screws to attach the firewall insulator to the interior of the steel firewall bulkhead.
Clean up and reuse your original mounting pins if you have them. We offer the
fol-lowing mounting pins and information based on what we have been able to find
avail-able.
Early Ford Firewall Mounting Pins
These all steel firewall mounting pins are a reproduction of the originals. They are
available in a 3/4 inch length (Long) and in a 1/2 inch length (Short). The long pins
work best for the early production cars and trucks. The Short pin works best for the
1942-48 cars and 1940-47 Trucks. The long pins may have been used in Ford cars as
late as 1954. The short pins may have been used in Ford Trucks through the mid 1950s.
Ford 3541-MPL 1935-41 Ford Firewall Mounting Pin-Long ........................... $3
Ford 4147-MPS 1941-47 Ford Firewall Mounting Pin-Short ........................... $3
GM Firewall Mounting Plugs
General Motors started using a plastic firewall mounting plug to attach the insulator
in the mid 1950s--1955 for Trucks and 1957 for Cars. These plugs are still used in
GM vehicles today.
GM 5500-MP 1955 to Present General Motors Mounting Plug ........................ $3
Street Rod Mounting Pins
With this new mounting pin kit, you can weld up your firewall mounting holes and
install any of our insulators for that “smoothie look.” Kit includes nine pin-sets and
installation instructions.
SRMP Street Rod Firewall Mounting Pin Kit ................................................. $34
Universal Mounting Pins
If your original firewall mounting pins are missing or damaged beyond repair, these
universal pins may be a solution. They are a plastic “Christmas tree” type pin that
will fit most 5/16 inch holes. Kit includes 10 pins.
UMPS-10 Universal Mounting Pin Set .............................................................. $20
Universal Wire Cap
A variety of car and truck manufacturers in the 1930s used a wire cap retainer to
mount the firewall insulator. These are still available in a Long (1/2 inch) and Short
(1/4 inch) variety and have a 1/2 inch button head that can be painted. To match the
firewall color.
UWC-MPL Universal Wire Cap Mounting Pin Long ....................................... $1
UWC-MPS Universal Wire Cap Mounting Pin Short ........................................ $1

1963-77 Mopar Muscle Pre-Cut Ready to Install Kits Year • Make

Transcription

Similar documents

Mega Mopar Series- U.S. 131 Motorsports Park

Trunk Floor Mats for Antique, Classic, Street Rods and Custom Cars

Electron Cloud Induced Beam Dynamics at CesrTA

seatbelt belts - Buckle-Down