Pistons - Band City Small Engine
Transcription
Pistons - Band City Small Engine
Pistons 6 www.recreationsupply.ca 137 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. The arrow on the top of the piston goes to the exhaust, except Polaris, arrow is on the mag side. The arrow is to verify piston pin location (Most pistons have locating pins to the intake). Only install the new piston assembly after determining the problem with the motor. Thoroughly clean all parts after disassembly. Inspect all disassembled parts for defects and proper clearance. Only use new gaskets when reassembling the motor and check top end bearing. Refer to manufacturer specification for ring end gap and piston clearance. Break in the Motor. Engine Modifications: NO WARRANTY will be allowed on pistons used in modified motors of any sort. ie. Pipes, porting, carburetion changes, air box modifications, etc. Damaged pistons MUST be returned for inspection. SPX is proud to present the QUANTUM SERIES PISTON. The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. Model Year Cyl. CC Arctic Cat – Kawasaki Cheetah 340 El-Tigre 340 El-Tigre Z 340 EXT 340 Jag 340 Lynx II 340 Pantera 340 Panther 340 Puma 340 Cheetah 440 EXT 440 Lynx II 440 Pantera 440 Panther 440 Puma 440 El-Tigre 440 El-Tigre Z 440 72-75 73-75 75 71 75 74 75 71-74 71-72 72-75 71 74 75 71-75 71-73 73-75 75 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 339F/C 339F/A 339F/A 339F/A 339F/A 339F/A 339F/C 339F/C 339F/C 436F/C 436F/A 436F/C 436F/C 436F/C 436F/C 436F/A 436F/A Arctic Cat – Suzuki Kitty Cat 77-00 1 60 Bore × Stroke (mm) SPX Pistons Size 60 × 60 STD .010 over .020 over 68 × 60 STD .010 over .020 over .040 over 68 × 60 STD .010 over .020 over Kits (G) Rings (G) Kits (G) Rings (G) Pin & Top C-clips (G) Bearing (G) $59.95 /Kit 701-1000 $23.46 701-2000 $59.95 /Kit 009-685 009-685-1 009-685-2 $13.78 R09-685 R09-685-1 R09-685-2 $9.99 P09-685 $2.34 /pr. CW16 $4.95 009-501 $19.85 B1021 $59.95 /Kit 701-1010 $23.46 701-2010 $59.95 /Kit 009-688 009-688-1 NLA NLA $15.35 R09-688 R09-688-1 R09-688-2 R09-688-4 $9.99 P09-688 $2.34 /pr. CW16 $4.95 009-501 $19.85 B1021 $59.95 /Kit 700-1030 $23.46 701-2030 $59.95 /Kit 009-689 NLA NLA $26.99 R09-689 R09-689-1 R09-689-2 $9.99 P09-688 $2.34 /pr. CW16 $6.95 009-502 $17.22 R09-690 R09-690-2 R09-690-4 $23.46 R09-692 R09-692-1 R09-692-2 R09-692-4 $8.95 P09-690 $2.34 /pr. CW16 $9.99 P09-692 $2.34 /pr. CW16 $6.95 009-502 701-1044 $23.46 701-2020 701-2022 701-2024 $23.46 701-2040 701-2041 701-2042 701-2044 $49.95 /Kit 009-604 $59.95 /Kit 009-690 009-690-2 009-690-4 $59.95 /Kit 009-692 009-692-1 009-692-2 009-692-4 $89.95 /Kit 701-1200 $26.39 701-2200 $69.99 /Kit 009-603 $23.46 R09-692 $8.60 P09-603 $2.34 /pr. CW18 $6.95 009-503 STD Jag 275 Lynx 2000T Jag 2000 F/A 1976 77-80 78-80 2 2 275 F/A 275 F/A Jag 340 Jag 340/Mt.Cat Jag 3000 Jag 3000 Lynx 3000 Trailcat 3000 Bearcat 340 Cheetah Puma Pantera 370 Panther 370 Panther 370 w/reverse Z 370 / ES /LX 87-90 90-99 76-80 79-80 91-93 79-80 95-00 94 94-97 2001 01-08 05-06 01-08 2 2 2 2 2 2 2 2 2 2 2 2 2 339F/A 339F/C 339F/A 339F/C 339F/C 339F/C 339F/C 339F/C 339F/C 367F/C 367F/C 367F/C 367F/C 54 × 60 60 × 60 60 × 60 STD .020 over .040 over STD .010 over .020 over .040 over STD Boxer Pistons $59.95 /Kit 701-1020 701-1024 $59.95 /Kit 701-1040 701-1041 Nikasil Bore All Piston Kits Include: Piston, Rings, Wrist pin, Circlips 138 www.recreationsupply.ca $6.95 009-502 SPX and Boxer Pistons SPX Pistons Bore × Stroke (mm) Size 65 × 65 STD Model Year Cyl. Bearcat 440 FC 95-00 2 Jag 440 87-99 2 Jag 440 Deluxe 99 2 Jag 4000 81-85 2 Jag AFS 89-93 2 Panther 440 80-81,84 2 Panther 440 89-90 2 Panther 440 93-01 2 Super Jag 87-97 2 Trailcat 4000 80-81 2 Z440 95-98 2 440 LC 76-80 2 Pantera 85-90 2 El Tigre 5000 87-88 2 6000 Series 76-79 2 Prowler 440 LC 90-94 2 ZR440 94-95 2 Prowler Special LC 91-94 2 Pantera 440 92-93 2 440Z 1993 2 Cheetah Touring 91-94 2 Cougar 91-94 2 Panther 440 LC 96-97 2 Jag 440 LC 1996 2 ZL440 97-00 2 El Tigre 4000 F/A 1977 2 Panther 4000 FC 77-78 Cheetah 5000 76-78 2 Cheetah 86-90 2 Cougar 5000 85-90 2 El-Tigre 5000 76-81 2 Lynx 2000S 77-80 1 Pantera 5000 76-78 2 Pantera 5000 77-81 2 Panther 5000 76-79 2 Panther 5000 86-88 2 ZL500, Carb, EFI 98-00 2 ZR500, EFI/LE 98-00 2 Powder Special 500/EFI 99-00 2 Nikasil Bore, Note : Wrist Pin 20mm F5 Firecat 03-06 2 F5 Firecat SNO PRO 03-06 2 F5 EFI LXR 2007 2 Sabercat 500 04-06 2 Sabercat 500 LX 04-06 Crossfire 500 07-08 M5 05-06 T 500 2008 Mountain Cat 500 EFI 01-02 2 ZR 500 01-02 2 ZR 500 CC 2002 2 ZR 500 EFI 01-02 ZL 500 EFI ESR 2001 ZL 500 2002 El-Tigre 6000 L/C 80-81 2 El-Tigre 6000 L/C 84-85 2 Nikasil Bore CC 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 431F/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 436L/C 431 F/A 500L/C 500L/C 70 × 65 STD Cheetah F/C Cougar F/C Nikasil Bore 86-90 86-90 2 2 500F/C 500F/C 70 × 65 STD .010 over .020 over Cheetah L/C El-Tigre 6000 El-tigre EXT 530 Nikasil Bore 86-89 86-89 89-91 2 2 2 529L/C 529L/C 529L/C 72 × 65 STD .010 over .020 over 500F/C 500F/C 500F/C 500F/A 250F/A 500F/A 500F/C 500F/C 500F/C 497 497 497 499 499 499 499 Boxer Pistons Pin & C-clips (G) $9.99 P09-671 $2.34 /pr. CW16 Top Bearing (G) $6.95 009-502 $28.59 R09-695 R09-695-1 - $9.99 P09-704 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $59.95 /Kit 009-698 $68.94 /Kit 009-693 $21.99 R09-696 $21.38 R09-693 R09-693-1 R09-693-2 $2.34 /pr. CW18 $8.95 P09-693 $2.34 /pr. CW18 $6.95 009-503 $6.95 009-503 $21.17 B1014 $69.95 /Kit 009-679 $34.99 R09-679 $9.85 P09-683 $2.34 /pr. CW20 $2.34 /pr. CW22 $21.17 B1024 Kits (G) $79.95 /Kit 701-1080 Rings (G) $23.46 701-2080 Kits (G) $79.95 /Kit 009-696 Rings (G) $21.99 R09-696 $79.95 /Kit 701-1070 $23.46 701-2070 $54.11 /Kit 009-695 $23.46 701-2080 $23.46 701-2050 $89.95 /Kit 701-1500 $23.46 701-2500 Nikasil Bore 68 × 60 STD .010 over .020 over 701-2072 Moly 65 × 65 STD 70 × 65 STD .010 over .020 over $59.95 /Kit 701-1100 $79.95 /Kit 701-1050 Moly 71 × 62.7 STD 71 × 63 STD $89.95 /Kit 701-1210 Moly $28.69 701-2210 STD $79.95 /Kit 701-1220 Moly $28.69 701-2220 $79.95 /Kit 701-1060 $23.46 701-2050 Nikasil Bore 497 497 497 71 × 62.7 $79.99 /Kit 009-605 $8.95 /pr. P09-605 $2.34 /pr. CW22 Nikasil Bore Note: Wrist Pin 22mm $65.95 /Kit $21.38 R09-693 009-691-1 R09-693-1 008-691-2 R09-693-2 $59.95 /Kit $23.46 $59.95 /Kit $33.99 701-1110 701-2110 009-699 R09-699 701-1111 009-699-1 R09-699-1 R09-699-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca $8.95 P09-693 $2.34 /pr. CW18 $8.95 P09-693 $2.34 /pr. CW18 $8.95 P09-693 $2.34 /pr. CW16 $6.95 009-503 $21.17 B1014 $6.95 009-503 $21.17 B1014 $6.95 009-503 $21.17 B1014 139 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model EXT Special, M-Cat EXT 550, EFI Bearcat 550 Pantera 550 Panther 550 ZL550 Bearcat 550 Cheetah 550 Cougar 550 EXT 550 Pantera 550 Panther 550 Prowler 550 Bearcat 570 Mountain Cat 570 Panther 570, ESR T570 Z 570 (All) EXT 580, M-Cat ZR580, Powder Sp. 580 Pantera 580,ZL580 ZR580 Crossfire 6 Year Cyl. CC 91-92 2 550L/C 93-94 2 550L/C 00-02 2 550L/C 02-05 2 550L/C 00-01 2 550L/C 00-03 2 550L/C 95-98 2 550L/C 94 2 550L/C 95-98 2 550L/C 93-94 2 550L/C 93-94 2 550L/C 97-98 2 550L/C 95 2 550L/C 04-09 2 565 f/c 02-08 02-07 08-09 02-07 93-97 2 580L/C 93-97 2 580L/C 95-01 2 580L/C 93-97 2 580L/C 06-08 2 598L/C F6 FIRE CAT EFI (All) Sabercat 600 EFI M6 EFI ZRT600 Powder Extreme 600 EXT Triple 600 EXT Triple Touring 600 Triple Touring 600 Triple Touring ZRT600 Nikasil Bore 04-10 04-06 05-10 95-00 97-98 1998 1998 99-00 2001 01-02 ZL600EFI, ZR600EFI 98-00 2 ZL600, ZR600 98-99 2 Powder Special 600 98-00 2 A Case series, Note : Wrist Pin 20mm Mountain Cat 600 01-04 2 Pantera 600 02-05 2 ZL600 01-03 2 ZR600 01-02 2 Wildcat 650 88-90 2 Wildcat 650 Mtn. Cat 89-90 2 Nikasil Bore Crossfire 7 Firecat 700 (All) Sabercat 700 M7 Nikasil Bore 140 2006 04-06 04-06 05-06 2 2 2 2 599 600 600 600 600 600 600 600 600 600 600 600 600 600 600 650 L/C 650 L/C 698 698 698 698 The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons Bore × Stroke (mm) Size 73.4 × 65 STD Boxer Pistons Pin & C-clips (G) $9.85 P09-683 $2.34 /pr. CW20 Top Bearing (G) $9.95 009-523 $21.17 B1024 $34.99 R09-683 $9.85 P09-683 $2.34 /pr. CW20 $9.95 009-523 $21.17 B1024 $89.95 /Kit 009-681 $39.99 R09-681 $9.85 P09-683 $2.34 /pr. CW20 $9.95 009-523 $21.17 B1024 $115.95 / Kit 009-656M $26.99 $68.69 /Kit 009-601 $27.99 R09-601 $9.99 P09-704 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $109.99 /Kit 009-610 $27.99 R09-601 $8.15 P09-808 $2.34 /pr. CW20 $2.34 /pr. CW20 Kits (G) $89.95 /Kit 701-1150 Moly Rings (G) $23.46 701-2150 Kits (G) Rings (G) STD $89.95 /Kit 701-1150 Moly $23.46 701-2150 $89.95 /Kit 009-687 STD $89.95 /Kit 701-1230 Moly STD $89.95 /Kit 701-1140 Moly $23.46 701-2140 Nikasil Bore 73.4 × 65 Nikasil Bore 73.8 × 66 Nikasil Bore 75.4 × 65 $99.95 /Kit 73.8 × 70 3 3 3 3 3 3 3 SPX is proud to present the QUANTUM SERIES PISTON. STD 701-1630 Moly R09-656 Nikasil Bore 66.5 × 57 STD $79.95 /Kit 701-1160 Moly $23.46 702-2160 Nikasil Bore 66.5 × 57 STD 78 × 62.7 STD 78 × 62.7 STD B Case series, Wrist Pin 22mm 78 × 68 STD 79.7 × 70 STD 79.7 × 70 STD $99.95 /Kit 701-1600 Moly $23.46 701-2600 $99.95 /Kit 701-1610 Moly $26.39 701-2610 $59.95 /Kit 701-1120 Moly $23.46 701-2120 $26.39 R09-609 $79.99 /Kit 009-684 $18.99 R09-684 $149.95 /Kit 701-4620 Quantum Series Moly $99.95 /Kit 701-1620 Moly All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca $8.60 P09-609 $2.34 /pr. CW22 $9.99 P09-684 $2.34 /pr. CW20 $2.34 /pr. CW22 $9.95 009-523 $21.17 B1024 $9.95 009-523 $21.17 B1024 SPX and Boxer Pistons Model Wildcat 700 ZR700 ZR700 & Powder Spec. Nikasil Bore F8 M8 Crossfire 8 Nikasil Bore Year Cyl. CC 91-96 2 699 L/C 94-96 2 699 L/C 99-00 2 699 L/C 07-09 07-09 07-09 2 2 2 794 794 794 Mountain Cat 800 Pantera 800 ZL800 ZR800 Pantera 800 ZRT800 Nikasil Bore 01-04 03-04 01-03 01-03 98-99 95-01 2 2 2 2 3 3 785 785 785 785 794 794 Thundercat 900 Nikasil Bore 93-97 3 895L/C ZR 900, Sno Pro ZR 900 EFI, Sno Pro King Cat 900 ,EFI Mountain Cat 900 / EFI Thundercat 1000 Pantera 1000 Mountain Cat 100 Nikasil Bore F1000 EFI Sno Pro F1000 EFI/LXR Mountain Cat 1000 Crossfire 1000 EFI 03-05 04-06 03-06 03-04 98-02 00-01 98-02 2 2 2 2 3 3 3 862 862 862 862 993L/C 993L/C 993L/C 07-09 07-08 07-09 07-09 2 2 2 2 1000 1000 1000 1000 1 1 2 1 1 1 1 1 1 1 2 2 3 488 F/C 488 F/C 244 F/C 244 F/C 244 F/C 244 F/C 244 F/C 244 F/C 244 F/C 244 F/C 336 F/A 336 F/A 500 F/A 336 F/A 2 250F/A Polaris Charger, Mustang 448 1971 Voyageur 488 1971 Colt 250 72-78 Custom II 250 1971 TC 250 72-78 Electra 250 70-71 Gemini 244 79-83 Star 83-90 Stat Trak 87-90 Starlite 91-92 TX Racer 335 1972 Colt SS 340 74-76 TX 500 72-73 TX 335,340 72-74 (For Chrome or Cast Cylinders) Colt 250 76-78 Starfire 250 TX 250 2 2 250 F/A 250 F/A Indy 340 79-83 2 Indy X-Country 83 2 TXL 340 77-82 2 (Not suitable for Chrome Cylinders) 333 L/C 333 L/C 333 L/C Colt SS 340 Cobra 340 Apollo 340 Galaxy 340 Cutlass 340 76 76-80 77,79 78-79 79-80 1980 1981 2 2 2 2 2 340 340 340 340 340 SPX Pistons Bore × Stroke (mm) Size 81 × 68 STD 85 × 70 STD Kits (G) $99.95 /Kit 701-1130 Moly Moly 81 × 76 STD Nikasil Bore Rings (G) $23.46 701-2130 $149.95/Kit 701-4650 TBA Quantum series Moly $99.95/Kit $24.95 701-1650 701-2650 $99.95 /Kit 701-1400 Moly Boxer Pistons Kits (G) $99.95/Kit 009-682 Rings (G) $39.99 R09-682 $99.95/Kit 009-611 $39.99 R09-682 Pin & C-clips (G) $9.99 P09-684 $2.34 /pr. CW20 $2.34 /pr. CW22 Top Bearing (G) $9.95 009-523 $21.17 B1024 $8.60 P09-611 $2.34 /pr. CW24 $9.85 P09-683 $2.34 /pr. CW20 $9.95 P09-686 $2.34 /pr. CW20 $10.95 009-527 $69.95 /Kit 701-1170 $22.89 701-2170 $69.95 009-602 $27.99 R09-602 STD $89.95 /Kit 701-1180 Moly $22.89 701-2180 $99.99 009-686 $34.65 R09-686 STD $109.95 /Kit 701-1640 Moly 81 × 64.6 STD $89.95 /Kit 701-1190 Moly $26.39 701-2190 $99.99/Kit 009-612 $39.99 R09-682 90.3 × 78 STD $109.95/Kit 701-1660 Moly $8.60 P09-609 $2.34 /pr. CW22 $2.34 /pr. CW22 $59.99 /Kit 009-700 009-700-2 009-700-4 $15.99 R09-700 R09-700-2 R09-700-4 $9.99 P09-700 $2.34 /pr. CW18 $6.95 009-520 $22.95 R09-701 $9.99 P09-671 $2.34 /pr. CW16 $8.95 009-513 $8.95 P09-702 $2.34 /pr. CW16 $8.95 P09-702 $2.34 /pr. CW16 $9.99 P09-671 $2.34 /pr. CW16 $8.95 009-513 72 × 65 STD 76.5 × 65 85 × Nikasil Bore Nikasil Bore STD .020 over .040 over $59.95 /Kit 704-1000 704-1002 704-1004 $23.46 704-2000 704-2002 704-2004 STD $59.95 /Kit 704-1010 $23.46 704-2010 53.5 × 55.6 STD $59.95 /Kit 704-1020 $23.46 704-2020 $48.86 /Kit 009-702 $19.35 R09-702 53.4 × 55.6 STD $59.95 /Kit 704-1030 $23.46 704-2030 $59.95 /Kit 009-703 $16.06 R09-703 $59.95 /Kit 704-1060 $23.46 704-2060 $59.95 /Kit 704-1080 704-1082 $23.46 704-2080 704-2082 $59.95 /Kit 009-706 009-706-1 009-706-2 009-706-3 009-706-4 $59.95 /Kit 009-708 009-708-2 $16.06 R09-706 R09-706-1 R09-706-2 R09-706-3 R09-706-4 $18.95 R09-708 R09-708-2 72 × 60 62 × 55.6 61.78 × 55.6 STD .010 over .020 over .030 over .040 over 61.78 × 55.6 STD .020 over $9.99 P09-671 $2.34 /pr. CW16 $9.95 009-523 $21.17 B1024 $9.95 009-523 $21.17 B1024 $10.95 009-527 $8.95 009-513 $8.95 009-513 $8.95 009-513 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca 141 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model Starfire 340 TX 340 Year Cyl. 1976 76-80 Sprint 340, ES Indy 340 Sport Indy 340 Sport GT Indy 340 Lite Indy 340 Lite Deluxe 340 Indy Lite, Deluxe Indy 340 Lite GT Lite Touring Indy 340, Deluxe, Classic Indy 340 Touring Indy Sport Touring Indy 400 86-90 87-90 89-90 91-93 92-93 2008 94-98 94-98 1998 99-08 99-07 99-04 84-91 2 2 2 2 2 2 2 CC Bore × Stroke (mm) 62 × 55.6 339 F/C 339 F/C 339 F/C 340 F/C 340 F/C 340 F/C Cobra 440 Cutlass SS, 440 Electra 440 Galaxy 440 Galaxy 440 E Cutlass SS 440, 440E TX-C 440C Longtrack Sport, Supersport SS TX 440 78-79 81-82 74-77 78-79 80-81 81-82 1981 83-86 1983 76-80 2 2 2 2 2 2 2 2 2 2 Size STD .010 over .020 over .030 over .040 over 62.3 × 55.6 STD .010 over .020 over .030 over 398 L/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 499 F/A STD .010 over .020 over .030 over .040 over 67.72 × 60 STD .010 over .020 over .030 over .040 over 67.75 × 60 STD 440 Indy Trail Trail/Trail Deluxe Long Track SS 440 440 Long Track LTR Indy XCF 440 Long Track Reverse Transport Sport Sport GT Sport SKS Sport Touring Super Sport Indy 440 XCR Indy 440 L/C Indy 440 SKS 84-86 1993 84-90 85-86 1987 97-98 88-89 96-99 91-99 91-93 1994 95-99 94-96 92-94 95-98 95-98 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 F/C 432 L/C 440L/C 440L/C The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons 62.25 × 55.6 STD .010 over .020 over 65 × 60 SPX is proud to present the QUANTUM SERIES PISTON. 67.75 × 60 STD .010 over .020 over .030 over .040 over Boxer Pistons Pin & C-clips (G) $9.99 P09-671 $2.34 /pr. CW16 Top Bearing (G) $8.95 009-513 $9.99 P09-802 $2.34 /pr. CW16 $7.50 009-525 $19.85 B1016 $39.99 R09-717 R09-717-1 R09-717-2 $9.99 P09-802 $2.34 /pr. CW16 $7.50 009-525 $19.85 B1016 $59.95 /Kit 009-707 009-707-1 009-707-2 009-707-3 009-707-4 $23.46 $59.95 /Kit 704-2040 009-704 009-704-1 704-2042 009-704-2 009-704-4 Note: Single Ring Pistons $23.46 R09-707 R09-707-1 R09-707-2 R09-707-3 R09-707-4 $23.46 R09-704 R09-704-1 R09-704-2 R09-704-3 R09-704-4 $10.49 P09-801 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $9.99 P09-704 $2.34 /pr. CW18 $6.95 009-520 $59.95 /Kit 704-1050 $23.46 704-2050 $65.95 /Kit 009-705 $13.94 R09-705 $6.95 009-520 $59.95 /Kit 704-1100 $23.46 704-2040 $23.46 R09-704 R09-704-2 704-1102 704-2042 $59.95 /Kit 009-710 009-710-1 009-710-2 009-710-3 009-710-4 $9.99 P09-704 $2.34 /pr. CW18 $9.99 P09-704 $2.34 /pr. CW18 Kits (G) $59.95 /Kit 704-1060 704-1061 704-1062 Rings (G) $23.46 704-2060 704-2061 704-2062 704-1064 $79.95 /Kit 704-1170 Moly 704-1172 Moly $79.95 /Kit 704-1170 704-1171 704-1172 Moly 704-2064 $23.46 704-2170 $69.95 /Kit 704-1070 704-1071 704-1072 $23.46 704-2070 704-2071 704-2072 $59.95 /Kit 704-1040 704-1042 704-2172 $23.46 704-2170 704-2172 Kits (G) $59.95 /Kit 009-706 009-706-1 009-706-2 009-706-3 009-706-4 $65.95 /Kit 009-709 009-709-1 009-709-2 Rings (G) $16.06 R09-706 R09-706-1 R09-706-2 R09-706-3 R09-706-4 $19.99 R09-709 R09-709-1 R09-709-2 $79.95 /Kit 009-717 009-717-1 009-717-2 009-717-3 $87.95 /Kit 009-715 009-715-2 67.72 × 60 STD .020 over Note: Single Ring Pistons $18.69 R09-713 R09-713-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips 142 www.recreationsupply.ca $6.95 009-503 $21.17 B1014 $8.95 P09-693 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 SPX and Boxer Pistons Model Indy Trail 488 Indy Trail SP Indy Trail SKS, ES Indy Trail Deluxe Indy Trail Touring Indy Trail RMK Year Cyl. 85-99 2 86,88-89 2 87-89 2 88-95 2 96-99 2 97-98 CC 488 F/C 488 F/C 488 F/C 488 F/C 488 F/C Centurion 500 79-92 3 Indy 500 L/C 82 3 (Not suitable for Chrome Cylinders) 500 L/C 500 L/C 500 RMK, SKS 500 XC XP Edge 500 XC 00-02 99-07 99-02 Liberty Motor Indy 500 RMK Indy Classic Touring Indy Widetrack LX 2 2 2 2 500 L/C 500 L/C 500 L/C 500 L/C 97-99 97-00 98-07 2 2 2 488 L/C 488 L/C 488 L/C Indy 500 Indy 500 SP Indy 500 SP EFI Indy 500 SPX Indy 500 EFI Indy 500 EFI SKS Indy 500 SKS Indy 500 SKS Indy 500 Classic Indy 500 Classic 500 Classic Touring 500 Classic Touring 500 Edge Indy 500 RMK Indy 550 Super Sport Super Sport 550 Edge Super Sport 550 Edge X Indy 550 Sport Touring Indy 550 Trail RMK Indy 550 Trail Touring Indy 550 Classic 550 Pro X Fan 550 Edge LX 580 XLT SP 580 XLT 580 XLT SKS Fuji Motor 89-06 89-92 1992 1992 93-97 93-96 89-92 95-97 89-02 04-06 93-94 01-03 03-04 1996 99-00 01-08 2003 00-04 99-08 00,02-08 02-06 2004 07-08 92-94 93-94 93-94 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 488 L/C 544 F/C 544 F/C 544 F/C 544 F/C 544 F/C 544 F/C 544 F/C 544 F/C 544 F/C 579 L/C 579 L/C 579 L/C 600 Classic 600 RMK 600 XC Deluxe 45th 600 XC SP Indy 600 2000 98-01 2000 98-99 83-87 2 2 2 2 3 593 L/C 593 L/C 593 L/C 593 L/C 597 L/C XLT 600, SP, SKS XLT 600 RMK, Touring XLT LTD, LTD SP XLT Classic XCR 600 XC 600 Triumph 600 Fuji Motor 95-99 95-99 95-99 95-99 95-96 1997 2000 3 3 3 3 3 3 3 598 L/C 598 L/C 598 L/C 598 L/C 598 L/C 598 L/C 598 L/C SPX Pistons Bore × Stroke (mm) Size 72 × 60 STD .010 over .020 over .030 over .040 over .060 over 61.78 × 55.6 STD .010 over .020 over .030 over .040 over 70.5 × 64 STD .010 over .020 over 72 × 60 STD .010 over .020 over .040 over 72 × 60 STD .010 over .020 over .030 over .040 over .060 over 73 × 65 STD .010 over .020 over .040 over Fuji Motor 64 × 60 74.5 × 68 STD .010 over .020 over .040 over Liberty Motor 65 × 60 STD .010 over .020 over .030 over .040 over 65 × 60 STD .010 over .020 over .030 over .040 over .060 over Kits (G) $79.95 /Kit 704-1120 704-1121 704-1122 704-1123 704-1124 704-1126 $59.95 /Kit 704-1060 Moly Rings (G) $23.46 704-2120 704-2121 704-2122 704-2123 704-2124 704-2126 $23.46 704-2060 $89.95 /Kit 704-1210 704-1211 704-1212 Moly $99.95 /Kit 704-1150 704-1151 704-1152 704-1154 Moly $79.95 /Kit 704-1120 704-1121 704-1122 704-1123 704-1124 704-1126 Moly $26.39 704-2210 $23.46 704-2120 704-2121 704-2122 704-2123 704-2124 704-2126 $99.95 /Kit 704-1220 704-1221 704-1222 Boxer Pistons Pin & C-clips (G) $9.99 P09-700 $2.34 /pr. CW18 Top Bearing (G) $6.95 009-503 $21.17 B1014 $9.99 P09-671 $2.34 /pr. CW16 $8.95 009-513 $19.85 B1016 Kits (G) $79.95 /Kit 009-712 009-712-1 009-712-2 009-712-3 009-712-4 Rings (G) $24.51 R09-711 R09-711-1 R09-711-2 R09-711-3 R09-711-4 $59.95 /Kit 009-706 009-706-1 009-706-2 009-706-3 009-706-4 $16.06 R09-706 R09-706-1 R09-706-2 R09-706-3 R09-706-4 $29.95 R09-720 $99.99 /Kit $34.99 R09-719 $9.99 P09-700 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $79.95 /Kit 009-712 009-712-1 009-712-2 009-712-3 009-712-4 $24.51 R09-711 R09-711-1 R09-711-2 R09-711-3 R09-711-4 $9.99 P09-700 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $26.39 704-2220 704-2221 704-2222 $87.95 /Kit 009-727 009-727-1 $26.99 R09-727 R09-727-1 009-727-4 R09-727-4 $9.99 P09-700 $2.34 /pr. CW18 $6.95 009-503 $19.94 B1014 $79.95 /Kit 704-1140 $23.46 704-2140 704-1142 704-2142 $7.50 009-525 $19.85 B1016 $26.39 704-2230 $39.99 R09-714 R09-714-1 R09-714-2 R09-714-4 $29.95 R09-721 $9.99 P09-802 $2.34 /pr. CW16 $79.95 /Kit 704-1230 Moly $65.95 /Kit 009-714 009-714-1 009-714-2 009-714-4 $79.99 /Kit 009-721 $69.95 /Kit 704-1070 704-1071 704-1072 $23.46 704-2070 704-2071 704-2072 $23.46 704-2160 $23.46 R09-707 R09-707-1 R09-707-2 R09-707-3 R09-707-4 $29.99 R09-716 R09-716-1 R09-716-2 R09-716-3 R09-716-4 R09-716-6 $6.95 009-503 $21.17 B1014 $79.95 /Kit 704-1160 704-1161 704-1162 $59.95 /Kit 009-707 009-707-1 009-707-2 009-707-3 009-707-4 $79.95 /Kit 009-716 009-716-1 009-716-2 009-716-3 009-716-4 - $9.95 P09-720 $2.34 /pr. CW20 $10.49 P09-801 $2.34 /pr. CW18 $9.99 P09-802 $2.34 /pr. CW16 $7.50 009-525 $19.85 B1016 009-726-1 009-726-4 Moly 704-2162 704-1164 $9.95 P09-720 $2.34 /pr. CW20 Moly All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca 143 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model 600 XCR SP 600 XCR SE Fuji Motor Reed Induction Nikasil Bore 600 Pro X 600 Pro X2 600 XC SP VES 600 XC SP Edge 600 RMK 600 Switchback 600 HO Fusion 600 Classic 600 Classic Touring 600 Edge Touring 600 Touring 600 HO IQ/LX Cleanfire 600 IQ Dragon 600 RMK 155 600 Switchback 600 IQ Shift 600 RMK Shift 600 IQ/ES 600 Dragon SP/ES 650 Indy 650 RXL, SKS Fuji Motor 680 Ultra 680 Ultra SP, SE 680 Ultra Touring 700 XCR 700 Classic 700 Classic Touring 700 Edge Touring 700 Pro X 700 Deluxe 45th Anniv. 700 RMK, SKS 700 Switchback 700 XC SP Indy Storm 800 Indy Storm 800 SKS Indy Storm 800 SE Fiju Motor Indy 800 LE Indy 800 Classic Indy 800 XC SP 800 RMK (all) 800 Switchback 800 Pro X 800 SKS 800 XC SP 800 Edge Touring Year Cyl. CC 96-98 3 598 L/C 1997 3 598 L/C 01-04 2004 00-02 01-05 02-07 04-07 06-07 01-06 01-04 02-07 00-07 2007 2008 2008 08-09 2009 2009 2009 2009 88-93 90-97 2 2 2 600 L/C 600 L/C 600 L/C 600 L/C 600 L/C 600 L/C The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons Bore × Stroke (mm) Size 62.5 × 60 STD 77.25 × 68 STD 77.25 × 68 STD 2 2 2 SPX is proud to present the QUANTUM SERIES PISTON. Liberty Motor 77.25 × 64 STD 77.25 × 64 STD Kits (G) $89.95 /Kit 704-1260 Moly Rings (G) $26.39 704-2260 $149.95 /Kit 704-4250 TBA Quantum series Moly $99.95 /Kit $28.69 704-1250 704-2250 Moly Boxer Pistons Kits (G) Rings (G) $99.95 /Kit 009-728 $32.99 R09-728 $149.95/Kit 704-4320 TBA Quantum series Moly $99.95/Kit $24.95 704-1320 704-2320 Moly Top Bearing (G) $6.95 009-503 $21.17 B1014 $2.34 /pr. CW20 Nikasil Bore 3 649 L/C 67.75 × 60 STD .010 over .020 over .030 over .040 over 97-98 96-97 96-98 1998 01-04 01-03 2004 03-04 2000 97-04 2004 97-05 94-98 94-97 1997 3 3 3 679 L/C 679 L/C 679 L/C 2 2 2 700 L/C 700 L/C 700 L/C 2001 2004 01-05 00-05 04-05 03-04 2003 01-05 04-05 2 2 2 66.5 × 65 STD $79.95 /Kit 704-1130 704-1131 704-1132 $23.46 704-2130 704-2131 704-2132 $86.19 /Kit 009-713 009-713-1 009-713-3 009-713-4 $18.69 R09-713 R09-713-2 R09-713-3 R09-713-4 $9.99 P09-704 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 704-1134 Moly $79.95 /Kit 704-1180 Moly 704-2134 $79.95 /Kit 009-718 Moly $29.99 R09-718 $149.95 /Kit 704-4200 TBA Quantum series Moly $89.95 /Kit $27.77 704-1200 704-2200 Moly - - $9.99 P09-800 $2.34 /pr. CW18 $9.95 P09-722 $2.34 /pr. CW20 $6.95 009-503 $21.17 B1014 $12.05 009-B039 $21.17 B1039 - - $79.95 /Kit $27.77 704-1190 704-2190 704-1192 Moly $149.95 /Kit 704-4240 Quantum series Moly $99.95 /Kit $26.39 704-1240 704-2240 Moly $77.06 /Kit 009-719 $34.99 R09-719 $9.99 P09-704 $2.34 /pr. CW18 $9.99 P09-730 $2.34 /pr. CW22 $21.17 B1014 $27.77 704-2180 Fuji Motor Reed 81 × 68 STD 81 × 68 STD Liberty Motor 3 794 L/C 800 L/C 800 L/C 800 L/C 72 × 65 STD .020 over 85 × 70 STD 85 × 70 STD $99.95 /Kit 009-730MC $32.99 R09-730 Nikasil Bore All Piston Kits Include: Piston, Rings, Wrist pin, Circlips 144 Pin & C-clips (G) $9.99 P09-753 $2.34 /pr. CW18 $9.95 P09-722 $2.34 /pr. CW20 www.recreationsupply.ca $9.85 009-B030 $21.17 B1030 SPX and Boxer Pistons Model Indy 800 LE Indy 800 Classic Indy 800 XC SP 800 RMK (all) 800 Switchback 800 Pro X 800 SKS 800 XC SP 800 Edge Touring Indy 800 XCR Nikasil Bore, Fuji Motor 800 Dragon 800 RMK 800 IQ 800 Switchback Year Cyl. CC 2001 2 800 L/C 2004 2 800 L/C 01-05 2 800 L/C 00-05 04-05 03-04 2003 01-05 04-05 99-03 3 800 L/C 08-09 08-09 08-09 2009 2 08-09 08-09 08-09 2009 05-06 05-06 05-06 2 2 2 2 866 L/C 866 L/C 866 L/C BRP / Ski-Doo Elan 250 Olympic 250 71-78 63-68 1 1 250 F/C 250 F/C 79-96 1 Size 85 × 70 STD 72 × 65 STD 85 × 70 STD 85 × 70 STD 85 × 70 STD 83 × 80 STD 69 × 66 STD .020 over .040 over .060 over .080 over .100 over 795 73-79 2 247.3 Citation Safari Citation 3500 Citation LS, LSE Tundra, LT Skandic 277 89-91 80-84 85-92 85-03 83-84 1 1 1 1 268 F/C 268 F/C 268 F/C 268 F/C Elan 294 SS Elan 300 SS TNT 294 TNT 300 Citation 300 Olympic 300 (Twin) 1974 1975 1973 1974 78-79 75-78 2 2 2 2 2 2 294 F/C 294 F/C 294 F/C 294 F/C 294 F/C 305 Olympique 320, 320E Olympique 300, S, M 1969 71-77 1 1 319 319 Skandik 335 Olympique 335 TNT 340 70-73 69-72 71 1 1 1 335 F/C 335 F/C 335 F/C Rings (G) $26.39 704-2240 Kits (G) $99.95 /Kit 009-730MC $89.95 /Kit $26.39 $81.99 /Kit 704-1270 704-2270 009-731 Moly $149.95 /Kit 704-4330 TBA Quantum series Moly $89.95 /Kit $24.95 704-1330 704-2330 Moly $89.95 /Kit 704-1340 Moly Dual Ring for updated engines $109.95 /Kit 704-1280 Moly Rings (G) $32.99 R09-730 69.5 × 66 STD .020 over .040 over .060 over .080 over 54 × 54 STD .020 over 72 × 61 STD .010 over .020 over .030 over .040 over 57 × 57.5 STD .010 over .020 over 55.5 × 61 STD (L.H.) STD (R.H.) .010 76 × 66 STD .020 over .040 over 78 × 70 STD .010 over .020 over $32.99 R09-731 Pin & C-clips (G) $9.99 P09-730 $2.34 /pr. CW22 Top Bearing (G) $9.85 009-B030 $21.17 B1030 $2.34 /pr. CW18 $21.17 B1014 TBA TBA $26.39 704-2280 $59.95 /Kit 250.4 Elan 250 (Twin) Kits (G) $99.95 /Kit 704-1240 Moly Boxer Pistons Nikasil Bore 795 800 Dragon 800 RMK 800 IQ 800 Switchback Fusion 900 900 Switchback 900 RMK 151", 159", 166" Elan 250 SPX Pistons Bore × Stroke (mm) $2.34 /pr. CW22 $62.92 /Kit 009-740 009-740-2 009-740-4 009-740-6 009-740-8 009-740-10 $59.95 /Kit 009-740-2 009-740-4 009-740-6 009-740-8 009-740-10 $59.95 /Kit 009-745 009-745-2 $17.69 R09-740 R09-740-2 R09-740-4 R09-740-6 R09-740-8 R09-740-10 $17.69 R09-740-2 R09-740-4 R09-740-6 R09-740-8 R09-740-10 $16.08 R09-745 R09-745-2 $27.99 R09-741 R09-741-1 R09-741-2 R09-741-3 R09-741-4 $21.08 R09-764 R09-764-1 R09-764-2 $8.99 P09-764 $2.34 /pr. CW15 $5.95 009-514 $65.95 /Kit $25.99 N/A 009-771 R09-771-1 $59.95 /Kit $23.46 $59.95 /Kit $21.82 702-1020 702-2020 009-742 R09-742 702-1022 702-2022 009-742-2 R09-742-2 702-1024 702-2024 009-742-4 R09-742-4 $59.95 /Kit $23.46 $71.62 /Kit $19.62 702-1040 702-2040 R09-746 009-746-1 R09-746-1 702-1042 702-2042 009-746-2 R09-746-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips $9.99 P09-770 $2.34 /pr. CW18 $9.99 P09-742 $2.34 /pr. CW18 $9.99 P09-742 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 702-1002 $59.95 /Kit 702-1002 $59.95 /Kit 702-1030 702-1032 $23.46 702-2030 702-2032 $79.95 /Kit 702-1010 702-1011 702-1012 $23.46 702-2010 702-2011 702-2012 702-1014 Moly $59.95 /Kit 702-1200 702-1201 702-1202 702-2014 $79.95 /Kit 009-741 009-741-1 009-741-2 009-741-3 009-741-4 $23.46 702-2200 702-2201 702-2202 $59.95 /Kit 009-764-2 www.recreationsupply.ca $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-745 $2.34 /pr. CW15 $8.95 P09-693 $2.34 /pr. CW18 $5.95 009-514 $6.55 009-505 $19.85 B1003 145 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model Everest 340, E Olympic 340, E TNT 340 Year Cyl. CC 77-79 2 339 F/C 75-79 2 339 F/C 72-76 2 339 F/C Bore × Stroke (mm) 59.5 × 61 59.5 × 61 TNT 340 F/A 73-78 2 339 F/A Blizzard 6500 + Blizzard 7500 + Blizzard Cross Country 1978 79-81 1979 2 2 2 339 L/C 339 L/C 339 L/C TNT, RV 340 76-80 2 346 F/A Citation 4500 Formula S Formula Deluxe 380F Grand Touring 380F Legend 380 F MXZ 380 Fan GSX / GTX 380 Fan Nordik Touring E, ELT Skandic 377 Skandic II 377, R Scandic 380 Safari 377 Saga 1989 , Scout Alpine 399 Nordic 399 Olympic 399,400 Valmont 399 79-83 95-98 99-02 01-04 02-04 02-06 05-06 81-84 96-00 82-87 92-98 96-00 84-91 89-92 70-71 70-71 69-73 1971 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 377 F/C 398.6 F/C 398.6 F/C 398.6 F/C 398.6 F/C Alpine 440 Nordic 440 Olympic 440 TNT 440 Valmount 440 72-74 1972 73-76 71-73 1973 2 2 2 2 2 436 F/C 436 F/C 436 F/C 436 F/C 436 F/C Everest 440 TNT 440 Olympic Plus 74-79 75-78 1977 2 2 2 436 F/C 436 F/C 436 F/C STD (L.H.) .010 over .020 over .040 over STD (R.H.) .010 over .020 over .040 over 59.5 × 61 STD .010 over .020 over .040 over STD .010 over .020 over STD .010 over .020 over .030 over .040 over 64.5 × 61 STD (L.H.) .010 over .020 over .040 over STD (R.H.) .010 over .020 over .040 over 67.5 × 61 STD (L.H.) .010 over .020 over STD (R.H.) .010 over .020 over 67.5 × 61 67.5 × 61 67.5 × 61 146 Size STD .010 over .020 over .040 over 62 × 61 The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons 59.5 × 61 63 × 54 SPX is proud to present the QUANTUM SERIES PISTON. STD (L.H.) .010 over .020 over STD (R.H.) .010 over .020 over Kits (G) $59.95 /Kit 702-1050 702-1051 702-1052 702-1054 702-1060 702-1061 702-1062 702-1064 $59.95 /Kit 702-1210 702-1211 702-1212 Rings (G) $23.46 702-2060 702-2061 702-2062 702-2064 702-2060 702-2061 702-2062 702-2064 $23.46 702-2210 702-2211 $59.95 /Kit 702-1070 702-1071 702-1072 702-1074 $59.95 /Kit 702-1230 702-1231 702-1232 $69.95 /Kit 702-1080 702-1081 702-1082 $23.46 702-2070 702-1084 Moly 702-2084 702-2072 $23.46 702-2230 702-2232 $23.46 702-2080 702-2081 702-2082 Boxer Pistons Kits (G) $59.95 /Kit 009-747 009-747-2 009-747-4 009-748 009-748-1 009-748-2 009-748-4 $65.95 /Kit 009-765 009-765-2 009-765-4 $65.95 /Kit $65.95 /Kit 009-767 $80.44 /Kit 009-751 009-751-1 009-751-2 009-751-3 009-751-4 Rings (G) $16.40 R09-748 R09-748-1 R09-748-2 R09-748-4 R09-748 R09-748-1 R09-748-2 R09-748-4 $21.95 R09-765 R09-765-1 R09-765-2 R09-765-4 $16.80 R09-750 R09-750-2 $22.99 R09-767 R09-767-2 $19.75 R09-751 R09-751-1 R09-751-2 R09-751-3 R09-751-4 $59.95 /Kit $23.46 $59.95 /Kit $18.46 702-1100 702-2110 009-753 R09-754 702-1101 702-2111 009-753-1 R09-754-1 702-1102 702-2112 009-769-2 R09-754-2 702-1104 702-2114 nla R09-754-4 702-1110 702-2110 009-754 R09-754 702-1111 702-2111 009-754-1 R09-754-1 702-1112 702-2112 009-768-2 R09-754-2 702-1114 702-2114 nla R09-754-4 $59.95 /Kit $23.46 $55.75 /Kit $17.06 702-1120 702-2150 009-756 R09-757 702-1121 702-2151 N/A R09-757-1 702-1122 702-2152 009-756-2 R09-757-2 N/A 702-2150 009-757 R09-757 702-1131 702-2151 009-757-1 R09-757-1 702-1132 702-2152 R09-757-2 $59.95 /Kit $23.46 $59.95 /Kit $16.40 702-1140 702-2150 009-758 R09-759 702-1141 702-2151 009-758-1 R09-759-1 702-1142 702-2152 009-758-2 R09-759-2 702-1150 702-2150 009-759 R09-759 702-1151 702-2151 009-759-1 R09-759-1 702-1152 702-2152 009-759-2 R09-759-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca Pin & C-clips (G) $9.99 P09-747 $2.34 /pr. CW18 Top Bearing (G) $6.55 009-505 $19.85 B1003 $9.99 P09-750 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-750 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-753 $2.34 /pr. CW18 $9.99 P09-750 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $9.99 P09-753 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-704 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-704 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 SPX and Boxer Pistons Model Blizzard 438 F/A TNT 440 F/A Year Cyl. CC 74-77 2 436.6 F/A 74-77 2 436.6 MX Z 440 Liquid Cool MX Z X 440 Racing Safari 447 Nordik 50 Safari LX, LXE MXZ 440F Skandic 440 Touring LE 440 Skandic 440 LT Blizzard 9500 + 99-06 04-05 84-86 87-91 90-93 97-01 01-02 97-00 01-07 79-82 Elite 450 Everest 444 , 464 L/C Formula SP, SS, SS-25, XT Formula MX, MXZ, LT, XTC Safari GLX, L/C, LCE Grand Touring 470 Formula SP 1 Summit 470 Alpine 500, 503 Blizzard 5500 & MX Everest 500 E Nordic 60, Skandic 503 Safari 503,Cheyenne Safari Voyageur, Rally Stratos, Escapade Formula SL, Touring SLE Safari Grand Luxe LC Skandic WT, SWT Skandic II 503 Gr. Touring 500 Fan Legend 500 Fan MXZ 500 Fan Summit 500 Fan Skandic Sport 500 Fan Blizzard 9700 Formula Plus, LT/XTC Formula SLS, 500 DLX Formula Z 500 Summit 500 MXZ 500 Touring 500 LC Skandic WT LC Formula Dlx 500 LC Gr. Touring 500 LC Legend 500 Sport Gr. Touring 500 Sport MXZ 500 MXZ 500 RER Sport MXZ 500 Sport/Trail Expedition 550 F Expedition 550 Sport Freestyle 550F Grand Touring 550 F GSX 550 F GTX 550 F Legend 550 F MXZ 550 F Skandic 550 F, SWT, SU Skandic 550 Fan WT Summit 550 F 78-80 78-83 84-86 85-95 80-83 1995 85-95 94-95 83-95 79-84 81-83 86-91 88-91 89,93-94 87-89 95-01 85-86 95-03 93-96 2002 2002 2002 02-04 03-04 83-84 85-91 96-00 1999 96-99 98-99 2000 99-00 2001 01-03 02-03 02-03 00-01 2002 02-03 05-07 07-08 07-09 2003 05-10 05-10 2004 03-10 04-10 04-10 03-10 2 SPX Pistons Bore × Stroke (mm) Size 67.5 × 61 STD .010 over .020 over .040 over 436.8 65 x 2 2 2 2 2 2 2 2 436.6 436.6 436.6 436.6 436.6 436.6 436.6 436 L/C 2 436 L/C 2 436 L/C 2 436/462 L/C 2 462 L/C 2 462 L/C 2 462 L/C 2 462 L/C 2 462 L/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 496 F/C 2 521 L/C 2 521 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 500 L/C 2 553 F/C 2 2 2 2 2 2 2 2 2 2 67.5 × 61 STD .010 over .020 over .040 over Kits (G) $59.95 /Kit 702-1220 702-1221 N/A Rings (G) $23.46 702-2220 702-2221 702-2222 $89.95 /Kit 702-1720 $79.95 /Kit 702-1090 702-1091 702-1092 $23.46 702-2090 702-2091 702-2092 Boxer Pistons Kits (G) $65.95 /Kit 009-766 $89.95 /Kit SM-09146 $79.95 /Kit 009-752 009-752-1 009-752-2 009-752-4 Rings (G) $21.95 R09-766 R09-766-1 R09-766-2 R09-766-4 $24.09 SM-09146R $20.49 R09-752 R09-752-1 R09-752-2 R09-752-4 Pin & C-clips (G) $8.95 P09-693 $2.34 /pr. CW18 Top Bearing (G) $6.55 009-505 $19.85 B1003 $9.99 P09-753 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 Moly STD .010 over .020 over .040 over $59.95 /Kit 702-1160 702-1161 702-1162 $79.95 /Kit 702-1170 702-1171 702-1172 702-1174 $23.46 702-2160 702-2161 702-2162 $23.46 702-2170 702-2171 702-2172 702-2174 $57.38 /Kit 009-760 009-760-1 $79.95 /Kit 009-761 009-761-1 009-761-2 009-761-4 $16.97 R09-760 R09-760-2 $16.40 R09-761 R09-761-1 R09-761-2 R09-761-4 $8.95 P09-693 $2.34 /pr. CW18 $8.95 P09-693 $6.55 009-505 $19.85 B1003 $6.55 009-505 $2.34 /pr. CW18 $19.85 B1003 72 × 61 STD .010 over .020 over .040 over $79.95 /Kit 702-1010 702-1011 702-1012 702-1014 $23.46 702-2010 702-2011 702-2012 702-2014 $79.95 /Kit 009-741 009-741-1 009-741-2 009-741-4 $27.99 R09-741 R09-741-1 R09-741-2 R09-741-4 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 69.5 × 68 STD .010 over .020 over .040 over $79.95 /Kit 702-1350 $26.70 702-2350 702-2352 702-2354 $19.99 R09-780 R09-780-1 R09-780-2 R09-780-4 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 702-1352 702-1354 $69.69 /Kit 009-780 009-780-1 009-780-2 009-780-4 $79.95 /Kit 702-1360 702-1362 $26.39 702-2360 702-2362 $99.99 /Kit 009-784 009-784-2 - $99.95 /Kit 702-1250 702-1251 702-1252 Moly $23.46 702-2250 $79.99 /Kit 009-779 009-779-1 009-779-2 67.5 × 61 STD .010 over .020 over 69.5 × 61 69.5 × 68 STD .020 over STD .010 over .020 over 702-2252 $8.95 P09-693 $2.34 /pr. CW18 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca 147 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model Formula Mach 1, XTC Formula Plus, E, XTC, X Formula Plus EFI, MX Grand Touring 583 Formula STX 583 Formula Z Formula Deluxe 583 Summit 583 MXZ 583 Mach I Rave Valve Mach I Rave Valve LC MX 600 H.O REV / X SUMMIT 600 HO (all) MXZ 600 Adrenaline MXZ 600 HO Renegade MXZ 600 HO/ SDI Renegade X MXZX 600 HO MXZ 600 Trail GSX 600 HO SDI GSX LTD 600 HO SDI GTX 600 HO SDI GTX LTD 600 HO SDI Grand Touring 600 LEGEND 600 Legend 600 HO SDI EXPEDITION TUV 600 HO SDI EXPEDITION 600 HO SDI Formula Deluxe 600 Formula Dlx. 600 GS/GSE Formula Z 600 Grand Touring 600 Grand Touring 600 GS Grand Touring 600 SE Grand Touring 600 Sport GSX 500 SS GTX 500 SS LEGEND 500 SS LEGEND 600 MXZ 500 SS Trail & Adren MXZ TNT 500 SS MX Z 600 (ALL) Skandic 600 SUV, WT Skandic 600 WT L/C Summit 600 Formula III 600 Formula III 600 LT Engine Type 599 Year Cyl. CC 89-92 581 92-93 581 93-94 581 93-99 581 94-96 581 94-96 581 89-99 581 94-98 581 96-99 581 89-90 581 91-92 617 2003 2 594 03-08 2 594 03-08 2 594 03-08 2 594 05-08 2 594 04-06 2 594 04-06 2 594 04-08 2 594 07-08 2 594 05-08 2 594 07-08 2 594 2003 2 594 2003 2 594 2004 2 594 2007 2 594 05-08 2 594 99-01 2 600 L/C 2001 2 600 L/C 99-00 2 600 L/C 99-01 2 600 L/C 2002 2 600 L/C 02-03 2 600 L/C 2002 2 600 L/C 04-09 2 600 L/C 05-09 2 600 L/C 02-04 2 600 L/C 02-03 2 600 L/C 04-09 2 600 L/C 08-09 2 600 L/C 99-02 2 600 L/C 03-08 2 600 L/C 01-09 2 600 L/C 99-02 2 600 L/C 95-99 3 598 L/C 1997 3 598 L/C Alpine 640 Nordic 640 TNT 640 Valmont 640 69-82 70-74 71-72 71-72 2 2 2 2 635 F/C 635 F/C 635 F/C 635 F/C Bore × Stroke (mm) 72 × 73 STD 72 × 73 STD Engine Type 593 H.O. STD .010 over .020 over Engine Type 597 76 × 70 76 × 70 148 Size STD .010 over .020 over .040 over 64.5 × 61 The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons 76 × 68 76 × 64 76 × 65.8 SPX is proud to present the QUANTUM SERIES PISTON. STD STD (L.H.) .010 over .020 over .040 over STD (R.H.) .010 over .020 over Kits (G) $79.95 /Kit 702-1260 Rings (G) $23.46 702-2260 702-1262 702-1264 Moly 702-2262 $149.95 /Kit 702-4610 TBA Quantum series Moly $89.95 /Kit $24.09 702-1610 702-2610 Boxer Pistons Kits (G) $79.95 /Kit 009-772 009-772-1 009-772-2 009-772-4 Rings (G) $14.60 R09-772 R09-772-1 R09-772-2 R09-772-4 Pin & C-clips (G) $9.99 P09-753 $2.34 /pr. CW18 Top Bearing (G) $6.55 009-505 $19.85 B1003 $2.34 /pr. CW20 $21.17 B1031 $11.95 009-B031 $89.95 /Kit 009-776 $89.95 /Kit 702-1600 702-1601 702-1602 Moly $24.09 702-2600 $89.95 /Kit 009-785MC 009-785-1 009-785-2 $29.99 R09-785 R09-785-1 R09-785-2 $9.85 P09-683 $2.34 /pr. CW20 $21.17 B1031 $59.95 /Kit 702-1300 $26.70 702-2300 $59.95 /Kit 009-774 $28.59 R09-774 $9.99 P09-753 $2.34 /pr. CW18 $9.99 P09-742 $2.34 /pr. CW18 $6.95 009-503 $21.17 B1014 $6.55 009-505 $19.85 B1003 $59.95 /Kit $23.46 $59.95 /Kit $26.99 702-1180 702-2180 009-762 R09-762 702-1181 009-762-1 R09-762-1 702-1182 702-2182 009-762-2 R09-762-2 702-1184 702-1190 702-2190 009-763 R09-763 702-1191 009-763-1 R09-763-1 702-1192 009-763-2 R09-763-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca SPX and Boxer Pistons Model Formula Mach I X, Formula Mach I Formula Grand Touring SE Formula SS 670 Summit 670 MX Z 670 Formula Z 670 670 H.O. Engine Summit-X 670 HO MXZ 670 H.O. Flat Top Year Cyl. 1993 2 93-96 2 94-96 2 95-96 2 95-96 2 96-98 2 98-99 2 1999 2 98-99 2 1999 2 CC 669 669 669 669 669 669 669 670 670 670 Formula Dlx 700 Formula Z 700 Grand Touring 700 Legend 700 (All) MXZ 700 (All) Summit 700 (All) Formula III 700/700R Grand Touring 700 Grand Touring SE Mach I 700 Mach Z 780 Mach ZLT 00-02 2000 01-03 02-04 00-03 00-03 98-00 98-00 97-98 97-00 93-96 1996 700 700 700 700 700 700 699 699 699 699 779 779 BLIZZARD PTEK LEGEND 800 LEGEND SE 800 SDI Grand Touring SE 800 GSX 800 Limited GSX LTD 800 PTEK GTX 800 HO GTX 800 LTD PTEK MXZ 800 (ALL) SUMMIT 800 (ALL) GSX LTD 800R MX Z ADRENALINE 800R MX Z RENEGADE 800R MX Z RENEGADE X 800R MX Z X 800R Summit EVEREST 800R Summit X 800R Summit Adrenaline 800R* Summit X* , XRS Formula II 800 Grand Touring 800 SE Mach Z 800 Mach Z LT Mach Z 800 Tech Plus Mach Z 1000 MACH Z Adrenaline MACH Z 1000 X MXZ 1000 SDI Renegade MACH Z 1000 LT SUMMIT HM SERIES 2007 02-04 03-04 02-03 04-07 2007 04-06 2007 01-07 01-07 2008 08-09 08-09 08-09 08-09 08-09 07-09 2007 2007 99-00 99-01 97-02 97-98 01-03 05-06 05-08 07-08 2007 2008 05-08 2 2 2 2 2 2 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 2 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 809 809 809 809 809 997 SPX Pistons Bore × Stroke (mm) Size 78 × 70 STD .010 over .020 over .040 over 78 × 70 STD .020 over .040 over 78 × 73 STD 69.8 × 61 STD 69.5 × 68 STD .010 over .020 over .040 over 82 × 75.7 STD 82 × 75.7 STD Nikasil Bore Engine Type 793 Kits (G) $89.95 /Kit 702-1500 Rings (G) $23.46 702-2500 702-1502 702-1504 Moly 702-2502 702-2504 $99.95 /Kit 702-1520 702-1522 702-1524 Moly $89.95 /Kit 702-1700 Moly Boxer Pistons Kits (G) $89.95 /Kit 009-773 009-773-1 009-773-2 Rings (G) $39.99 R09-773 R09-773-1 R09-773-2 Pin & C-clips (G) $9.99 P09-773 $2.34 /pr. CW20 Top Bearing (G) $6.55 009-524 (93-96) $11.95 009-B031 (97-99) $2.34 /pr. CW20 $24.09 702-2700 $89.95 /Kit 009-783MC $79.95 /Kit 702-1410 Moly $27.37 702-2410 $79.99 /Kit 009-781 $34.99 R09-781 $79.95 /Kit 702-1350 $26.70 702-2350 $69.69 /Kit 009-780 009-780-1 009-780-2 009-780-4 $19.99 R09-780 R09-780-1 R09-780-2 R09-780-4 703-1352 702-2352 703-1354 702-2354 Moly $149.95 /Kit 702-4800 TBA Quantum series Moly $89.95 /Kit $24.09 702-1800 702-2800 Moly $89.95 /Kit 009-778 $24.99 R09-778 $66.92 /Kit 009-782 $34.99 R09-782 $9.99 P09-684 $2.34 /pr. CW20 $21.17 B1031 $9.99 P09-800 $2.34 /pr. CW18 $9.95 P09-780 $2.34 /pr. CW18 $6.95 009-503 $6.95 009-503 $21.17 B1014 $2.34 /pr. CW20 $21.17 B1031 $11.95 009-B031 $9.99 P09-800 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $149.95 /Kit 702-4810 TBA Quantum series Moly $109.95 /Kit $24.09 702-1810 702-2810 Moly 82 × 75.7 STD 82 × 75.7 STD 70.5 × 68 STD $79.95 /Kit 702-1400 Moly $26.39 702-2400 82 × 92 STD $139.95 /Kit 702-1420 Moly $24.95 702-2420 $2.34 /pr. CW24 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca 149 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model Year Cyl. CC Yamaha BR 250 BR 250T, TS BR 250 TS 82-94 85-10 84-97 1 1 1 246 246 246 Enticer 250 77-81 1 250 F/C Bore × Stroke (mm) 70 × 64 150 71-72 1 Size STD .010 over .020 over .030 over .040 over 292 GP 292 SM 292 72-73 73-74 1 1 292 292 ET300 80-84 2 294 GP 338 GS 338 GS 340 SL 338 1973 1975 76-79 74-75 2 2 2 2 338 F/C 338 F/C 338 F/C 338 F/C GPX 338 74-75 2 338 F/A The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons 72.96 × 59 STD .010 over .020 over .030 over .040 over SL 292 SPX is proud to present the QUANTUM SERIES PISTON. 72 × 70 STD 73 × 70 STD .040 over 56 × 59.6 STD .010 over .020 over .040 over 60 × 59.6 STD .010 over .020 over .030 over .040 over .060 over 60 × 59.6 STD .010 over .020 over 60 × 59.6 STD .010 over .020 over .030 over .040 over .060 over Enticer 340 Ovation 340 Excel III 78-87 89-00 82-88 2 2 2 338 F/C 338 F/C 338 F/C Exciter 340 STX 340 76-78 76-77 2 2 340 F/C 340 F/C 60 × 59.6 STD .010 over .020 over .040 over ET400 ET410TR 89-91 92-01 2 2 408 408 66 × 59.6 STD .010 over .020 over Boxer Pistons Kits (G) Rings (G) Kits (G) Rings (G) $59.95 /Kit 703-1000 703-1001 703-1002 $20.95 703-2000 703-2001 703-2002 $59.95 /Kit 703-1010 703-1011 703-1012 703-1013 703-1014 $95.81 /Kit 703-1090 $23.46 703-2010 703-2011 703-2012 703-2013 703-2014 $23.46 703-2090 $59.95 /Kit 009-800 009-800-1 009-800-2 009-800-3 009-800-4 $65.77 /Kit 009-801 009-801-3 009-801-4 $99.99 /Kit 009-810 $17.99 R09-800 R09-800-1 R09-800-2 R09-800-3 R09-800-4 $27.06 R09-801 R09-801-1 R09-801-2 R09-801-3 R09-801-4 $33.95 R09-810 $95.81 /Kit 703-1110 $23.46 703-2110 $65.95 /Kit 009-812 - $20.45 R09-812 R09-812-4 $59.95 /Kit 703-1100 $23.46 703-2100 $59.95 /Kit 703-1030 703-1031 $23.46 703-2030 703-2031 $59.95 /Kit 703-1150 $23.46 703-2150 $79.95 /Kit 703-1020 703-1021 703-1022 703-1023 Moly $23.46 703-2020 703-2021 703-2022 $59.95 /Kit 009-811 009-811-1 009-811-2 009-811-4 $59.95 /Kit 009-803 009-803-1 009-803-2 009-803-4 009-803-6 $59.95 /Kit 009-815 009-815-1 009-815-2 $79.95 /Kit 009-802 009-802-1 009-802-2 009-802-3 009-802-4 009-802-6 $50.83 /Kit 009-804 009-804-2 009-804-4 $62.89 /Kit 009-805 009-805-1 009-805-2 $15.98 R09-811 R09-811-1 R09-811-2 R09-811-4 $22.99 R09-803 R09-803-1 R09-803-2 R09-803-3 R09-803-4 R09-803-6 $15.57 R09-815 R09-815-1 R09-815-2 $17.99 R09-802 R09-802-1 R09-802-2 R09-802-3 R09-802-4 R09-802-6 $14.75 R09-804 R09-804-1 R09-804-2 R09-804-4 $22.99 R09-807 R09-807-1 P09-807-2 $23.46 703-2040 $79.95 /Kit $23.46 703-1050 703-2070 703-1051 703-2071 703-1052 703-2072 Moly All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca Pin & Top C-clips (G) Bearing (G) $9.99 P09-800 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $10.49 P09-801 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-750 $2.34 /pr. CW18 $10.49 P09-810 $2.34 /pr. CW18 $8.95 P09-811 $2.34 /pr. CW16 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $8.95 009-513 $9.99 P09-747 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-747 $2.34 /pr. CW18 $9.99 P09-802 $2.34 /pr. CW16 $6.55 009-505 $19.85 B1003 $6.95 009-522 $9.99 P09-747 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.95 P09-675 $2.34 /pr. CW16 SPX and Boxer Pistons Model Year Cyl. SR433, GPX433 71-75 2 Piston Port Engines (single ring) CC 433 S433,SL433,GP433 71-74 Piston Port Engines (single ring) 2 433 Exciter 440, STX GP 440 PR440 GP, TL, 433 Reed Valve Engine 76-81 76-78 76-77 1975 2 2 2 2 433 F/C 433 F/C 443 F/C 443 F/C SS 440 80-84 2 440 F/C SRX 440 78-80 Chrome Bore Sleeving or replating for oversizes 2 SRX 440 Chrome Bore Phazer 480 & 500 Venture 500 F/C Mountain Lite 500 VT480TF Venture XL Touring 1981 2 440 L/C 84-01 91-06 97-01 93-02 99-00 2 2 2 2 2 485 F/C 485 F/C 485 F/C 485 F/C 485 F/C XLV, EC540 SRV 540 XL 540, XL-V VK 540 I,II,III 79-84 80-91 85-90 88-07 2 2 2 2 535 F/C 535 F/C 535 F/C 535 F/C V-Max 540 Chrome Bore 83-91 2 535 L/C Sleeving for oversize VX 500 VMAX DX/ST/LE/XT VX 500 VMAX XT / XTC / XTR VT500 LC VENTURE VX 500 SX / SXR V-Max 500, SX500R Venture 500 SPX Pistons Bore × Stroke (mm) Size 68 × 59.6 STD .010 over .020 over .040 over 68 × 59.6 STD .010 over .020 over .040 over 68 × 59.6 STD .010 over .020 over .040 over .060 over 66 × 64 STD .010 over .020 over .040 over Kits (G) $59.95 /Kit 703-1130 Pin & C-clips (G) $10.49 P09-801 $2.34 /pr. CW18 Top Bearing (G) $6.55 009-505 $19.85 B1003 $9.99 P09-800 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $10.49 P09-801 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-747 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.15 P09-808 $2.34 /pr. CW20 $8.59 009-521 $22.46 R09-813 R09-813-1 R09-813-2 - $10.49 P09-801 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $89.95 /Kit 009-808 009-808-1 009-808-2 009-808-3 009-808-4 $62.31 /Kit 009-816 009-816-2 $22.63 R09-808 R09-808-1 R09-808-2 R09-808-3 R09-808-4 $29.99 R09-816 R09-816-2 $8.15 P09-808 $2.34 /pr. CW20 $8.59 009-521 $63.31 /Kit 009-825 - $34.99 R09-825 R09-825-2 $99.99 /Kit 009-829 $34.99 R09-825 $8.59 009-521 $21.17 B1023 $8.59 009-521 $21.17 B1023 $8.59 009-521 703-2172 $59.95 /Kit 009-817 009-817-1 009-817-2 $24.60 R09-817 R09-817-1 R09-817-2 $8.15 P09-808 $2.34 /pr. CW20 $8.15 P09-808 $2.34 /pr. CW20 $8.15 P09-808 $2.34 /pr. CW20 $8.15 P09-808 $2.34 /pr. CW20 $9.85 P09-683 $2.34 /pr. CW20 $8.15 P09-808 $2.34 /pr. CW20 $8.59 009-521 $21.17 B1023 Rings (G) $23.46 703-2130 $59.95 /Kit 703-1060 703-1061 703-1062 $23.46 703-2060 703-2061 703-2062 $59.95 /Kit 703-1070 703-1071 703-1072 $23.46 703-2070 703-2071 703-2072 439 L/C 68.5 × 59.6 STD .010 over .020 over 66 STD 72 × 59.6 STD .010 over .020 over .040 over 73 × 64 STD .010 over .020 over .030 over .040 over 73 × 64 STD .020 over 68 × 68 STD .020 over 94-96 97-98 97-01 99-01 97-01 97-01 2 493 L/C 2 2 Sleeving for oversizes 493 L/C 493 L/C 68 × 68 Exciter 570 Series 87-90 Cast Iron Bore Exciter II 91-93 Nikasil Bore Sleeving or replating for oversizes V-Max 600 Series 94-99 Mountain Max 600 98-99 Venture 600 97-98 Sleeving or replating for oversizes. V-Max 600 Series 99-02 Mountain Max 600 00-02 SX600R 00-02 SX Venom Series 04-06 Venture 600 99-06 2 569 L/C 73 × 68 2 569 L/C 2 2 2 598 L/C 598 L/C 598 L/C 3 3 3 3 3 593 L/C 593 L/C 593 L/C 593 L/C 593 L/C $79.95 /Kit 703-1120 703-1121 703-1122 703-1124 Moly $89.95 /Kit 703-1080 703-1081 703-1082 Moly $23.46 703-2120 703-2121 703-2122 703-2124 $59.95 /Kit 703-1160 $23.46 703-2160 $79.95 /Kit 703-1230 $23.46 703-2230 STD Moly $94.24/Kit 703-1220 STD .010 over .020 over $59.95 /Kit 703-1170 703-1171 703-1172 Boxer Pistons $23.46 703-2080 $23.46 703-2170 Kits (G) $55.00 /Kit 009-814 009-814-2 009-814-4 $65.95 /Kit 009-827 009-827-4 $59.95 /Kit 009-806 009-806-1 009-806-2 009-806-4 $59.95 /Kit 009-807 009-807-1 009-807-2 009-807-4 $70.38 /Kit 009-818 009-818-1 $79.95 /Kit 009-8023 $79.95 /Kit 009-813 009-813-1 009-813-4 Rings (G) $16.40 R09-814 R09-814-1 R09-814-2 R09-814-4 $16.95 R09-827-4 $18.52 R09-806 R09-806-1 R09-806-2 R09-806-4 R09-806-6 $22.99 R09-807 R09-807-1 R09-807-2 $18.99 R09-818 R09-818-2 74.8 × 68 STD $89.95 /Kit 703-1210 Moly $23.46 703-2210 $79.95 /Kit 009-826 $34.99 R09-826 65 × 59.6 STD $89.95 /Kit 703-1260 Moly $26.39 703-2260 $89.99 /Kit 009-830 - $8.59 009-521 $21.17 B1023 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca 151 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model V-Max 700 Series Mountain Max 700 Venture 700 SX 700 R Mountain SRX 700 SRX 700 Series SX Viper Series SX Viper Mountain Ser. Venture 700 V-Max 750 V-Max 800 Nikasil Bore Year Cyl. CC 97-02 3 698 L/C 98-04 3 698 L/C 98-03 3 698 L/C 00-01 3 698 L/C 1998 3 696 L/C 98-02 3 696 L/C 02-05 3 696 L/C 03-06 3 696 L/C 2004 3 696 L/C 92-94 4 743 L/C 95-97 4 Bore × Stroke (mm) The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons Size 70.5 × 59.6 STD 69 × 62 SPX is proud to present the QUANTUM SERIES PISTON. STD Kits (G) $79.95 /Kit 703-1240 Moly Rings (G) $23.46 703-2240 $99.95 /Kit 703-1250 Moly $26.39 703-2250 Boxer Pistons Kits (G) Rings (G) 63 × 59.6 STD .020 over $65.95 /Kit – 009-820-2 $21.95 – R09-820-2 65 × 59.6 STD $73.99 /Kit 009-821 - 791 L/C Pin & C-clips (G) $8.15 P09-808 $2.34 /pr. CW20 $8.15 P09-808 $2.34 /pr. CW20 Top Bearing (G) $12.05 009-B039 $21.17 B1039 $12.05 009-B039 $21.17 B1039 $9.99 P09-685 $2.34 /pr. CW16 $9.99 P09-800 $2.34 /pr. All Piston Kits Include: Piston, Rings, Wrist pin, Circlips Out of Production Snowmobiles Model Year JLO & Cuyuna JLO 340 Cuyuna 71-80 JLO 399,400 Cuyuna 74-78 JLO 440 & 650 3-cyl. LR 440/2-9 Cuyuna 440 R650/2 CC 2 339F/C 2 398F/C 2 436F/C 2 398F/C 2 2 2 438F/C 438F/C 438L/C 74-80 72-73 John Deere – CCW CCW 400/2 (piston port) Cyclone 440 JDX 8 Liquifire 440 Cyl. 76-78 74-75 76-78 Bore × Stroke (mm) SPX Pistons Size 60 × 60 STD .010 over .020 over 65 × 60 STD .010 over .020 over 67.5 × 60 STD .010 over .020 over 65 × 60 STD .010 over .020 over 66 × 64 STD (L.H.) .010 over .020 over .040 over STD (R.H.) .010 over .020 over .040 over 66 × 64 Boxer Pistons Kits (G) Rings (G) Kits (G) Rings (G) Pin & Top C-clips (G) Bearing (G) $59.95 /Kit 700-1040 700-1041 700-1042 $59.95 /Kit 700-1050 700-1051 700-1052 $59.95 /Kit 700-1060 700-1061 700-1062 $23.46 700-2040 700-2041 700-2042 $23.46 700-2050 700-2051 700-2052 $23.46 700-2060 700-2061 700-2062 $59.95/Kit 009-660 $59.95/Kit 009-661 009-661-2 $65.95/Kit 009-662 009-662-2 $17.55 R09-660 R09-660-1 R09-660-2 $15.95 R09-661 R09-661-1 R09-661-2 $18.99 R09-662 R09-662-1 NLA $9.99 P09-685 $2.34 /pr. CW16 $9.99 P09-685 $2.34 /pr. CW16 $9.99 P09-671 $2.34 /pr. CW16 $6.95 009-515 $59.95 /Kit 700-1000 700-1001 700-1002 $59.95 /Kit 700-1010 $23.46 700-2000 700-2001 700-2002 $23.46 700-2010 $6.55 009-505 700-2012 700-1020 700-1021 700-2011 $15.95 R09-665 R09-665-1 R09-665-2 $22.99 R09-666 R09-666-1 R09-666-2 NLA R09-666 R09-666-1 R09-666-2 NLA $9.99 P09-800 $2.34 /pr. CW18 700-1020 $65.95/Kit 009-665 009-665-1 009-665-2 $59.95/Kit 009-666 009-666-1 009-666-2 009-666-4 009-667 009-667-1 009-667-2 009-667-4 John Deere–Kawasaki Note: Rings do NOT fit oem pistons, only aftermarket. Liquifire 440 80-84 2 436L/C $59.95 /Kit $23.46 $59.95 /Kit $26.99 Sportfire 440 80-84 2 436F/C 68 × 60 STD 700-1030 701-2030 009-689 R09-689 Trailfire 440 79-84 2 436F/C .010 over 700-1031 nla R09-689-1 Resleeving or replating required for oversizes .020 over 701-2032 nla R09-689-2 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips 152 www.recreationsupply.ca $2.34 /pr. CW18 $9.99 P09-688 $2.34 /pr. CW16 $6.95 009-522 SPX and Boxer Pistons Model Year Cyl. CC Kawasaki (Kawasaki) Astro 340 Drifter 340 Invader 340 77 80 78-80 2 2 2 338F/C 338F/C 339L/C Astro 440 Drifter 440 Intriguer 440 Intruder 440 Invader 440 Invader 440LTD 4/6 1977 79-81 1978 78-82 79-81 80 2 2 2 2 2 2 436F/C 436F/C 436F/C 436F/C 436L/C 436L/C 2 338 Kohler K340-2AX SPX Pistons Bore × Stroke (mm) Size 60 × 60 STD .010 over .020 over 68 × 60 STD .010 over .020 over 2 $59.95 /Kit 700-1030 Rings (G) $23.46 701-2030 STD .010 over $59.95 /Kit 700-1070 $23.46 700-2070 62.38 × 56 .020 over .040 over Moto-Ski (Rotax) Spirit 250 Mirage I Mirage 300 76-83 80-82 79 1 1 2 250 F/C 696 × 66 STD .020 over .040 over .060 over .080 over 72 × 61 STD .010 over .020 over .040 over 57 × 57.5 STD .010 over .020 over 55.5 × 61 STD (L.H.) STD (R.H.) .010 59.5 × 61 STD (L.H.) .010 over .020 over .040 over STD (R.H.) .010 over .020 over .040 over 268 F/C 294 F/C Nuvik 300 75-77 2 305 F/C Nuvik 340 Futura 340 75-79 75 2 2 337 F/C 337 F/C 59.5 × 61 Super Sonic Sonic 340 Mirage II, IIE, III, Sp. 79-81 76-78 80-85 2 2 2 Kits (G) Rings (G) Pin & Top C-clips (G) Bearing (G) $59.95 /Kit 009-685 009-685-1 009-685-2 $59.95 /Kit 009-689 nla nla $13.78 R09-685 R09-685-1 R09-685-2 $26.99 R09-689 R09-689-1 R09-689-2 $9.99 P09-685 $2.34 /pr. CW16 $9.99 P09-688 $2.34 /pr. CW16 $4.95 009-501 $59.95 /Kit 009-670 009-670-1 009-670-2 $65.95 /Kit 009-675-2 009-675-4 $18.03 R09-670 $18.95 R09-675-2 - $10.95 P09-672 $2.34 /pr. CW18 $9.99 P09-692 $2.34 /pr. CW16 $8.95 009-513 $8.95 P09-693 $2.34 /pr. CW16 $6.55 009-505 $19.85 B1003 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.99 P09-764 $2.34 /pr. CW15 $9.99 P09-770 $2.34 /pr. CW18 $9.99 P09-747 $2.34 /pr. CW18 $5.95 009-514 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $9.99 P09-750 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $9.99 P09-753 $2.34 /pr. CW18 $9.99 P09-750 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $6.95 009-522 Resleeving or replating required for oversizes 62 × 56 K340-2 Kits (G) Boxer Pistons 339 L/C 59.5 × 61 STD .010 over .020 over .040 over 63 × 54 STD .010 over .020 over 62 × 61 STD .010 over .020 over .030 over .040 over 346 F/A 377 F/C $59.95 /Kit 702-1002 $17.69 R09-740-2 R09-740-4 R09-740-6 R09-740-8 R09-740-10 $79.95 /Kit $23.46 $27.99 702-1010 702-2010 R09-741 702-1011 702-2011 R09-741-1 702-1012 702-2012 R09-741-2 702-1014 702-2014 R09-741-4 $59.95 /Kit $23.46 $21.08 702-1200 702-2200 R09-764 702-1201 702-2201 R09-764-1 702-1202 702-2202 R09-764-2 $25.99 R09-771-1 $59.95 /Kit $23.46 $59.95 /Kit $16.40 702-1050 702-2060 009-747 R09-748 702-1051 702-2061 009-747-1 R09-748-1 702-1052 702-2062 009-747-2 R09-748-2 702-1054 702-2064 009-747-4 R09-748-4 702-1060 702-2060 009-748 R09-748 702-1061 702-2061 009-748-1 R09-748-1 702-1062 702-2062 009-748-2 R09-748-2 702-1064 702-2064 009-748-4 R09-748-4 $59.95 /Kit $23.46 $65.95 /Kit $16.80 702-1070 702-2070 009-750 R09-750 702-1071 009-750-1 R09-750-1 702-1072 702-2072 009-750-2 R09-750-2 702-1074 009-750-4 R09-750-4 $59.95 /Kit $23.46 $65.95 /Kit $22.99 702-1230 702-2230 009-767 R09-767 702-1231 009-767-1 R09-767-1 702-1232 702-2232 009-767-2 R09-767-2 $69.95 /Kit $23.46 $80.44 /Kit $19.75 702-1080 702-2080 009-751 R09-751 702-1081 702-2081 009-751-1 R09-751-1 702-1082 702-2082 009-751-2 R09-751-2 009-751-3 R09-751-3 702-1084 702-2084 009-751-4 R09-751-4 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca $59.95 /Kit 009-740-2 009-740-4 009-740-6 009-740-8 009-740-10 $79.95 /Kit 009-741 009-741-1 009-741-2 009-741-4 $59.95 /Kit 009-764 009-764-1 009-764-2 $65.95 /Kit N/A 009-771 $8.95 009-513 153 SPX and Boxer Pistons Piston Assemblies comes complete with piston, rings, pin and circlips PIston rings are keystone type and only install one way. If the ring will not install properly, check to make sure that the chamfered edge is to the top of the piston. Model Futura 400 Year Cyl. CC 77-79 2 400 F/C Bore × Stroke (mm) 64.5 × 61 64.5 × 61 Futura 440 Nuvik 440 75-79 1977 2 2 436 F/C 436 F/C 67.5 × 61 67.5 × 61 Futura 444, 464 Futura 464 Sonic L/C 78-79 80-82 1984 2 436 L/C 2 462.7L/C 2 462.7L/C Ultra Sonic 80-82 2 80-82 79-81 1982 Size Kits (G) Rings (G) $59.95 /Kit 702-1140 702-1141 702-1142 702-1150 702-1151 702-1152 $79.95 /Kit 702-1170 702-1171 702-1172 702-1174 $59.95 /Kit 702-1160 702-1161 702-1162 $79.95 /Kit 702-1010 702-1011 702-1012 702-1014 $23.46 702-2150 702-2151 702-2152 702-2150 702-2151 702-2152 $23.46 702-2170 702-2171 702-2172 702-2174 $23.46 702-2160 702-2161 702-2162 $23.46 702-2010 702-2011 702-2012 702-2014 STD (L.H.) 010 over 020 over STD (R.H.) .010 over .020 over STD (L.H.) .010 over .020 over STD (R.H.) .010 over .020 over 69.5 × 61 STD .010 over .020 over .040 over 436 L/C 2 496.7 F/C 2 496.7 F/C The evolutionary piston is made from a space-age aluminum alloy which maintains its high tensile strength up to 700°F (300°C). This is 50% higher than a conventional cast piston. This high resistance to temperatures significantly improves fatigue, strength and impact toughness. The aluminum alloy combined with the existing anodized crown, machine smoothed heads and MOS2 coated skirts meets the demand for today’s high performance engines. SPX Pistons STD .010 over .020 over Futura 500, 500E Grand Prix Spec. Sonic SPX is proud to present the QUANTUM SERIES PISTON. 72 × 61 STD .010 over .020 over .040 over 73.0 x 70 STD 67.5 x 61 STD 60 × 59.6 STD .010 over .020 over .030 over .040 over .060 over 68 × 59.6 STD .010 over .020 over .040 over Boxer Pistons Kits (G) $65.95 /Kit 009-768 – 009-768-2 009-769 – 009-769-2 $59.95 /Kit 009-758 009-758-1 009-758-2 009-759 009-759-1 009-759-2 $79.95 /Kit 009-761 009-761-1 009-761-2 009-761-4 $57.38 /Kit 009-760 009-760-1 009-760-2 $79.95 /Kit 009-741 009-741-1 009-741-2 009-741-4 Rings (G) $22.95 R09-768 R09-769-1 R09-769-2 R09-769-1 R09-769-2 $16.40 R09-759 R09-759-1 R09-759-2 R09-759 R09-759R09-759-2 $16.40 R09-761 R09-761-1 R09-761-2 R09-761-4 $16.97 R09-760 R09-760-1 R09-760-2 $27.99 R09-741 R09-741-1 R09-741-2 R09-741-4 Pin & C-clips (G) $9.99 P09-753 $2.34 /pr. CW18 Top Bearing (G) $6.55 009-505 $19.85 B1003 $9.99 P09-704 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $8.95 P09-693 $2.34 /pr. CW16 $8.95 P09-693 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $6.55 009-505 $19.85 B1003 $9.99 P09-747 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 $10.49 P09-801 $2.34 /pr. CW18 $6.55 009-505 $19.85 B1003 Sachs 280/290 1 440 F/C Nikasil Bore 154 2 $97.66 /Kit 89-1110 $69.95 /Kit 009-8070 F/C 439F/C Sno-Jet (Yamaha) Astro Jet 340 Astro SS 340 SST 338 SST 340 Star Jet 340 1974 74-76 1972 73-74 72-73 2 2 2 2 2 338 F/C 338 F/C 338 F/C 338 F/C 338 F/C Sabre Jet 433 1974 2 433 F/C $59.95 /Kit 703-1030 703-1031 $23.46 703-2030 703-2031 $59.95 /Kit $22.99 009-803 R09-803 009-803-1 R09-803-1 090-803-2 R09-803-2 R09-803-3 009-803-4 R09-803-4 009-803-6 R09-803-6 $59.95 /Kit $23.46 $59.95 /Kit $18.52 703-1060 703-2060 009-806 R09-806 703-1061 703-2061 009-806-1 R09-806-1 703-1062 703-2062 009-806-2 R09-806-2 009-806-4 R09-806-4 All Piston Kits Include: Piston, Rings, Wrist pin, Circlips www.recreationsupply.ca Machine Shop Services Nikasil Cylinder Rebuilding • • • • • 2-10 times the wear resistence of any other process. 5 times better heat transfer than cast iron. Withstand temperatures of 1200°F. Excellent oil retension. Greater thickness compared to normal. Send your beat up cylinder in for inspection. If we have a rebuilt cylinder in stock it will be shipped the same day. If we do not, your cylinder will be sent for rebuilding (2-3 week delivery). $299.95 exchange (A) Professional Machine Shop Services at Recreation Supply Co. Hourly Rate (A) $55.00 $20.00 $110.00 Description Boring Labour Honing Labour Resleeving Labour Crankshaft Labour 1-cyl. Crankshaft Labour 2-cyl. Crankshaft Labour 3-cyl. Polaris/Yamaha only Crankshaft exchange available phone for prices Needle bearings Part # CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL Price (G) $5.95 $4.95 $6.95 $6.95 $5.95 $6.55 $6.95 $7.49 $5.95 $5.95 $7.49 $5.95 $8.95 $5.95 $6.95 $5.95 $5.95 $6.95 $8.59 $6.95 $9.95 $6.55 $7.50 $10.95 $11.95 $55.00 $90.00 $180.00 Comments includes chamfering of ports includes: installation, port matching, chamfering, and boring to fit piston. parts are extra parts are extra parts are extra Replacement Wrist Pins fit all OEM & Aftermarket Pistons I.D. mm 19 16 16 18 18 18 16 18 20 18 22 20 16 15 16 20 22.5 18 20 16 20 20 16 O.D. mm 23 20 21 23 22 22 20 22 24 22 26 24 20 19 22 24 29 23 25 20 26 24 20 Length 24 22 20 22 23 22 24 19 22 28 32 24 20 20 17 30 13.5 21 24 22.5 24 22.7 21.7 20 25 22.8 Dia.(mm) 15mm 15mm 16mm 16mm 16mm 16mm 16mm 16mm 16mm 16mm 16mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 18mm 20mm 20mm 20mm Len.(in) 1.870" 1.941" 1.750" 1.800" 1.840' 1.875" 1.965" 1.990" 2.050' 2.205" 2.310" 1.670" 1.846" 1.975" 1.985" 2.000" 2.085" 2.160" 2.200" 2.250" 2.320" 2.370" 2.435" 2475" 2.325" 2.500" 2.557" Part # CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL CALL www.recreationsupply.ca Price (G) $9.99 $8.99 $8.95 $8.95 $8.95 $9.99 $9.99 $9.99 $9.99 $8.95 $9.99 $10.95 $9.99 $9.99 $8.95 $9.99 $9.99 $10.49 $9.99 $9.99 $8.95 $10.49 $9.99 $9.99 $9.85 $9.99 $9.99 Piston Circlips (pairs) Size Part # Price (G) 15 mm CALL $2.99 16 mm CALL $2.99 16 mm CALL $2.99 18 mm CALL $2.99 18 mm CALL $2.99 20 mm CALL $2.99 (* part numbers ending in "S" are for square groove only) 155 Wiseco Pistons and Kits (M-Series) Part Number System The P-Series system was based on the English or Imperial measuring system. The M-Series is based on the Metric System. The M-Series part numbering system was implemented to ensure accuracy for today’s high performance snowmobile motors. M-style Dome Stamping Run/Date Code________________________ B00G2 Part Number (complete)_ ____________ 2373M07350 ➔ Exhaust Arrow_ __________________________ Labels for M-Series Part Numbers Part number Description In 2001, Wiseco changed the part numbers on all individual Snowmobile piston kits. The P-Series part numbers have been converted to the M-Series part numbering system. Min. clearance Rings Bar-code 2390M06650 2618CD ARCTIC CAT ZR440 96-98 Clear: 0.0030(0.076mm) 2618CD CW18 062804/1/2/1234 S511 Replaces: 2390PS Retainer Clip Piston Pin Replaces number IIIIIIIIIIIIIIIIIIIIIIIIII How to Read Catalog Pages Standard Bore & Stroke sizes in millimeters Manufacturer Specific models, years, descriptions & notes Model ARCTIC CAT Piston Part Number (Single piston) Replacement Components No. Std. Displ. Bore Price Repl. Repl. Repl. Optional of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Cyl. x (mm) Piston Piston Pin Clips (see pg. 548) Accessories Stroke Part No. $19.77 $2.34 Bearings & Gaskets are all Top End (mm) (H) (I) (I) ZR440 1996-98 2 66.5 438 Std. 2390M06650 $116.72 2618CD S511 CW18 ZR440 1999 (Consumer model) x 63 • Pro-Lite • Nikasil Bore Kit Part # SK1260 Bore Size 66.5mm/Std. Displ. 438cc Bearing: Gasket: Con. Rod: Sleeve: B1014 W5596 NA See pg. 38 Kit Price (G) $310.76 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets NOTE: Gasket will not fit ZR440 consumer model Complete Kit Part number… (No kit info box = No kit available for that model) 156 www.recreationsupply.ca Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) ARCTIC CAT Panther 370 Panther 370R Z370 Z370ES Z370LX 2001-08 2 2003-06 1999-07 2000-03 2004-07 60 x 65 367 373 379 Std. 0.50 1.00 CALL CALL CALL $114.44 $114.44 $125.88 2362CD S482 CW18 2382CD 2402CD Bearing: B1003 Gasket: W6664 Kit Part # Bore Size Displ. Kit Price (H) CALL 60mm/Std. 367cc $268.88 CALL 60.5mm/Std. 373cc $268.88 CALL 61mm/Std. 379cc $291.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets T1A440S1 2 68 436 T1B440S x T1A440F2 60 T7C440FR2 T7A440RX Lynx II 440 1974 El Tigre Panther 440 1971-75 VIP440 1974 Puma 440 1971-73 EXT & EXT Special 440 1971 440 Cheetah 1972-75 Pantera 440 1975 Puma Mod 440A 1971 Std. 0.25 0.50 1.00 CALL CALL CALL CALL $112.84 $119.75 $112.84 $112.84 2677CDM S259 CW16 2687CD 2697CD 2717CD Bearing: Gasket: Con. Rod: Sleeve: B1021 W5311 NA See listing Lynx 2000S 1977-80 1 70 250 Std. CALL $109.07 2756CD S513 CW18 x • Nikasil Bore 65 • Sleeving or replating required for oversizes Bearing: Gasket: Con. Rod: Sleeve: B1014 W5090 NA NA 440 Panther 1980-81, 1984, 1989-90 2 65 431 Std. CALL $104.13 2559CD S486 CW16 4000 Jag 1981-85 x Jag AFS 1989-93 65 4000 Trailcat 1980-81 Super Jag 1987-97 440 El Tigre 4000 1976 Panther 440 1993-01 440 Jag 1987-99 Jag 440 Deluxe 1999 Bearcat 440 1993-98 Bearcat 440 I, II 1999-00 Z440 1995-98 Bearing: Gasket: Con. Rod: Sleeve: B1008 NA NA NA Bearing: Gasket: Con. Rod: Sleeve: B1014 W5092 NA See listing • Pro-Lite • Chrome bore - 2677CDM rings required for Std. Bore • Sleeving or replating required for oversizes • Nikasil Bore Note: Will not fit Z440 or Z440 Snow Pro 99-02 440LC 1976-80 2 68 435 Std. CALL $104.13 2677CD S513 CW18 Pantera 1985-90 x El Tigre 5000 1987-88 60 6000 Series 1976-79 • Nikasil Bore Kit Part # CALL Bore Size 68mm/Std. Displ. 435cc Kit Price (H) $263.08 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Prowler 440 LC 1990-94 2 68 436 Std. CALL $105.90 2677CD S513 CW18 Bearing: B1014 ZR440 1994-95 x Gasket: See listing Prowler Special LC 1991-94 60 Con. Rod: NA Pantera 440 1992-93 Sleeve: See listing 440Z 1993 Cheetah Touring 1991-94 Kit Part # Bore Size Displ. Kit Price (H) Cougar 1991-94 CALL 68mm/Std. 436cc $265.13 Panther 440 LC 1996-97 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Jag 440 LC 1996 NOTE: Gasket will not fit ZR440 model ZL440 1997-00 • Nikasil Bore • Pro-Lite www.recreationsupply.ca 157 Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. of Bore (cc) Size Wiseco Per Ring Set Piston Retainer see page 180 Pin Cyl. × (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) Optional Accessories Bearings & Gaskets are all Top End ARCTIC CAT ZR440 1996-97 2 66.5 438 Std. CALL $116.72 2618CD S511 CW18 ZR440 1998 (Consumer model) x 63 • Pro-Lite • Nikasil Bore Kit Part # CALL Bore Size 66.5mm/Std. Bearing: Gasket: Con. Rod: Sleeve: Displ. 438cc B1014 W5596 NA See listing Kit Price (H) $310.76 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets NOTE: Gasket will not fit ZR440 consumer model ZR 440 Sno Pro 1998-01 2 66.5 438 Std. CALL $123.50 2618CD S511 CW18 Bearing: B1014 x Gasket: 1999-01: W5951 • Pro-Lite 63 • Nikasil Bore Kit Part # CALL Bore Size 66.5mm/Std. Displ. 438cc Kit Price (H) $324.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets ZR 440 Sno Pro 2002-03 2 66.5 438 Std. CALL $143.30 6650KE S391 CW18 Bearing: x Gasket: • Pro-Lite 63 • Nikasil Bore Kit Part # CALL Bore Size 66.5mm/Std. Displ. 438cc NA 2002: W5951 2003-04: W6199 Kit Price (H) $377.97 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 5000 El Tigre 2 70 499 Std. CALL $109.07 2756CD S513 CW18 Pantera 1976-81 x Cheetah 5000 1976-78, 1986-90 65 Panther 5000 1976-79 Cougar 5000 1985-90 Bearing: Gasket: Con. Rod: Sleeve: B1014 W5090 NA See listing • Nikasil Bore ZR500 1998-00 2 71 497 Std. CALL $117.92 2795KD S512 CW20 Bearing: B1024 ZL500 1999-00 x Gasket: W5597 ZL500 EFI 1998-00 62.7 Con. Rod: NA Powder Special 500 EFI 2000 Sleeve: See listing • A Case Series Kit Part # Bore Size Displ. Kit Price (H) • Pro-Lite CALL 83mm/Std. 497cc $313.17 • Nikasil Bore Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 6000 Series 2 70 499 Std. CALL $109.07 2756CD S513 CW18 LC 1980-81 & 1984-85 x 65 • Pro-Lite • Nikasil Bore Bearing: Gasket: Con. Rod: Sleeve: B1014 W5092 NA FL1105 Arctic Cat 500 Sno Pro 2010 2 71 499 Std. CALL $136.19 2795KA TBA TBA Bearing: NA CF5 EFI T 2009 x Gasket: W6200 F5 EFI 2007-09 63 Sabercat 500 LX 2004-06 F5 LXR 2010 Kit Part # Bore Size Displ. Kit Price (H) M5 2005-06 CALL 71mm/Std. 499cc $353.59 Crossfire 500 2007-08 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets T500 2008-09 • Nikasil Bore El Tigre 6000 LC 1986-90 2 72 529 Std. CALL $109.32 2835CD S511 CW18 530 Cheetah LC 1986-88 x 530 El Tigre EXT 1989-90 65 • Pro-Lite Kit Part # Bore Size Displ. • Nikasil Bore 158 CALL 72mm/Std. 529cc Bearing: Gasket: Con. Rod: Sleeve: B1014 W5037 NA 6014FA Kit Price (H) $273.46 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End see page 180 Pin Cyl. x (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) ARCTIC CAT EXT Special 1991 2 73.4 550 Std. CALL $117.96 2889CDW S512 CW20 Bearing: B1024 EXT 550 1992-93 x Gasket: W5245 Cheetah 550 1994 65 Con. Rod: NA EXT EFI 1993-94 Sleeve: 6013FA EXT Mountain Cat Pantera EFI 1993-94 Pantera 550 EFI 2003 Pantera 550 2004-05 Prowler Two Up 1995 Kit Part # Bore Size Displ. Kit Price (H) Panther 1997-01 CALL 73.4mm/Std. 550cc $313.23 Cougar 1995-98 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Bearcat LC 1995-02 ZL550 ESR 2000-03 ZL550 2001-02 • Pro-Lite • Nikasil Bore EXT 580Z LC 1993-97 2 75.4 581 Std. CALL $119.99 2966TDW S512 CW20 ZR580 1993-97 x EFI 1998 65 1.00 CALL $131.99 3012TDW EXT 580 Mountain Cat 1993 EXT 1996-98 Powder Special 1996 EXT 580Z 1993-94 EXT Deluxe 1996-98 Pantera 580 EFI 1999-01 Pantera 1996-98, 2001 Kit Part # CALL CALL Bore Size 75.4mm/Std. 76.4mm/+1mm Displ. 581cc 596cc Bearing: Gasket: B1024 W5334 Kit Price (H) $317.29 $341.30 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Nikasil Bore • Sleeving or replating required for oversizes ZR600 1998-99 2 78 599 Std. CALL $126.72 3071KD S512 CW20 ZR600 EFI 1998-99 X 0.50 CALL $126.72 3091KD ZL600 1998-99 62.7 ZL600 EFI 1998-99 Powder Special 1998-00 Powder Special EFI 1998-99 Kit Part # Bore Size Displ. Note: 20 mm wrist pin • A Case Series • Pro-Lite • Nikasil Bore CALL 78mm/Std. CALL 78.5mm/Std. 599cc 607cc Bearing: B1024 Gasket: W5961 Kit Price (H) $330.76 $330.76 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 680cc for: 2 78 680 5.00 CALL $136.19 3268KD S512 CW20 Bearing: B1024 ZR600 1998-99 x Gasket: W5961 ZR600 EFI 1998-99 62.7 ZL600 1998-99 ZL600 EFI 1998-99 Kit Part # Bore Size Displ. Kit Price (H) Powder Special 1998-00 CALL 83mm/+5mm 680cc $349.70 Powder Special EFI 1998-99 $349.10 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • A Case Series • Pro-Lite • Nikasil Bore • Cylinder sleeving or replating required • Cylinder head machining required Mountain Cat 2001 2 78 599 Std. CALL $132.52 3071KD S640 CW22 Bearing: NA Pantera 600 EFI 2002-05 x Gasket: W5961 ZL 600 EFI 2000-03 62.7 ZL 600 EFI ESR 2001-03 ZL 600 EFI SS 2002-03 Kit Part # Bore Size Displ. Kit Price (H) ZR 600 2000-02 CALL 78mm/Std. 599cc $342.36 ZR 600 EFI LE 2001 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets ZR 600 CCE EFI 2002 Mountain Cat 600 EFI LE 2001-04 Powder Special 600 EFT 2000 Note: 22 mm wrist pin • B Case Series • Pro-Lite www.recreationsupply.ca 159 Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) ARCTIC CAT OVERBORE to 680cc for: 2 78 680 5.00 CALL $136.79 3268KD S640 CW22 Bearing: NA Mountain Cat 2001 x Gasket: W5961 Pantera 600 EFI 2002-05 62.7 ZL 600 EFI 2000-03 ZL 600 EFI ESR 2001-03 ZL 600 EFI SS 2002-03 ZR 600 2000-02 ZR 600 EFI LE 2001 Kit Part # Bore Size Displ. Kit Price (H) ZR 600 CCE EFI 2002 Mountain Cat 600 EFI LE 2001-04 CALL 83mm/+5mm 680cc $350.89 Powder Special 600 EFT 2000 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • B Case Series • Pro-Lite • Cylinder sleeving or replating required • Cylinder head machining required ZRT600 1996-00 3 66.5 594 Std. CALL Powder Extreme 1998 x 0.50 CALL EXT Triple 600 1996-97 57 1.00 CALL EXT Triple Touring 1997-98 Triple Touring 600 1999-00 • Pro-Lite • Nikasil Bore Kit Part # CALL CALL CALL $114.98 $114.98 $114.98 Bore Size 66.5mm/Std. 67mm/+0.5mm 67.5mm/+1.0mm 2618CD S511 CW18 2638CD 2658CD Displ. 594cc 603cc 612cc Bearing: B1014 Gasket: W5498 Kit Price (H) $439.05 $439.05 $439.05 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 696cc for: 3 66.5 696 5.50 CALL $118.25 2835CD S513 CW18 ZRT600 1996-00 x Powder Extreme 1998 57 EXT Triple 600 1996-97 EXT Triple Touring 1997-98 Triple Touring 600 1999-00 Bearing: B1014 Gasket: W5553 • Pro-Lite • Nikasil Bore • Cylinder sleeving required • Cylinder head machining required CF6 Crossfire 6 2006-10 2 73.8 698 Std. CALL $148.80 2905KD S694 CW22 Bearing: NA F6 Fire Cat Series 2004-09 x Gasket: W6161 F6 Fire Cat EFI Sno Pro 2004-10 70 M6 Series 2005-10 Saber Cat 600 Series 2004-06 Kit Part # Bore Size Displ. Kit Price (H) • Electra Coated • Nikasil Bore CALL 73.8mm/Std 698cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Wild Cat 650 1988-90 2 78 650 Std. CALL $113.81 3071TD S461 CW20 x • Pro-Lite 68 699 3.00 CALL $125.09 3189TDW • Nikasil Bore 709 3.50 CALL $99.95 3209TD • Sleeving or replating required for oversizes Kit Part # CALL CALL Bore Size 78mm/Std. 81mm/+3mm Displ. 650cc 699cc • Pro-Lite • Nikasil Bore 160 Kit Price (H) $308.83 $331.39 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Crossfire 7 2006 2 79.7 698 Std. CALL $148.05 3140KD S662 CW22 F7 Firecat Series 2003-06 x F7 Firecat Sno Pro 2004-06 70 M7 Series 2005-06 Sabercat 700 EFI LX 2004-06 Bearing: B1024 Gasket: W5088 Kit Part # CALL Bore Size 79.7mm/Std. Displ. 698cc Bearing: NA Gasket: W6161 Kit Price (H) $377.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) ARCTIC CAT EFI 700 Mountain Cat 1991-96 2 81 699 Std. CALL $125.09 3189TDW S461 CW20 700 Mountain Cat 1991-93 x 700 Wild Cat 1991-96 68 716 1.00 CALL $137.60 3228TD EFI 700 Mountain Cat 1991-96 Power Special 700 1999-00 ZR700 1994-96, 1999-00 Kit Part # Bore Size Displ. ZL700 2000 CALL 81mm/Std. 699cc • Pro-Lite • Nikasil Bore • Sleeving or replating required for oversizes CALL 82mm/+1mm Kit Price (H) $331.39 $356.42 716cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 790cc for: 2 81 790 5.00 CALL $150.69 3385KD S423 CW20 EFI 700 Mountain Cat 1991-96 x 700 Mountain Cat 1991-93 68 700 Wildcat 1991-96 EFI 700 Mountain Cat 1991-96 Powder Special 700 1999-00 ZR700 1994-96, 1999-00 ZL700 2000 Bearing: B1024 Gasket: W5088 Kit Part # Bore Size Bearing: B1024 Gasket: W5088 Displ. Kit Price (H) CALL 86mm/+5mm 790cc $382.59 • Pro-Lite Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Nikasil Bore • Cylinder sleeving or replating required • Must bore cases to accept sleeves • Cylinder head machining required ZRT 800 1995-01 3 72 794 Std. CALL $119.26 2835CD S512 CW20 Pantera 800 1998-99 x 65 • Pro-Lite • Nikasil Bore Kit Part # CALL Bore Size 72mm/Std. Bearing: B1024 Gasket: W5447 Displ. 794cc Kit Price (H) $451.88 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 800cc Twin 2 81 785 Std. CALL $148.05 3189KD S651 CW24 Bearing: NA ZR800 EFI 2001-03 x Gasket: W5941 ZR800 LE 2001-02 76 ZL 800 ESR 2001 ZL 800 EFI ESR 2002-03 ZL 800 EFI SS 2002-03 Kit Part # Bore Size Displ. Kit Price (H) ZL 800 2001-02 CALL 81mm/Std. 785cc $377.32 Mountain Cat 800 LE 2001-04 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Mountain Cat 800 EFI LE 2002-03 Pantera 800 EFI 2003-04 • Pro-Lite • Nikasil Bore OVERBORE to 883cc for: 2 81 883 5.00 CALL $162.63 3385KD S651 CW24 Bearing: NA 800cc Twin x Gasket: W5941 ZR800 EFI 2001-03 76 ZR800 LE 2001-02 ZL 800 ESR 2001 ZL 800 EFI ESR 2002-03 Kit Part # Bore Size Displ. Kit Price (H) ZL 800 EFI SS 2002-03 CALL 86mm/+5mm 883cc $406.47 ZL 800 2001-02 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Mountain Cat 800 2001-04 Mountain Cat 800 EFI LE 2002-03 Pantera 800 EFI 2003-04 • Pro-Lite • Nikasil Bore • Cylinder head machining required • Sleeving or replating required for oversizes F8 Series 2007-09 2 M8 Series 2007-09 CF8, CFR8, Crossfire 8 Series 2007-09 • Pro-Lite • Nikasil Bore • Electra Coated 85 794 Std. CALL $137.80 3347KA S640 CW22 x 70 Kit Part # CALL Bore Size 85mm/Std. Displ. 794cc Bearing Gasket: NA W6588 Kit Price (H) $399.59 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca 161 Snowmobile Pistons & Kits for Arctic Cat No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) ARCTIC CAT King Cat 900 Series 2004-06 2 85 862 Std. CALL $148.05 3347KD S651 CW24 Mountain Cat 900 Series 2003-04 x ZR 900 Series 2003-05 76 ZR 900 Sno Pro Series 2005-06 • Pro-Lite • Nikasil Bore • Electra Coated Kit Part # CALL Bore Size 85mm/Std. Bearing: TBA Gasket: W5941 Displ. 862cc Kit Price (H) $377.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Thunder Cat 900 1993-97 3 76.5 895 Std. CALL $114.90 3012TDW S512 CW20 x • Pro-Lite 65 • Nikasil Bore Kit Part # CALL Bore Size 76.5mm/Std. Bearing: B1024 Gasket: W5335 Displ. 895cc Kit Price (H) $438.82 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 992cc for: 3 76.5 992 4.00 CALL $132.71 3169TD S512 CW20 Bearing: B1024 Thunder Cat 900 1993-97 x Gasket: W5335 65 Con. Rod: NA • Pro-Lite Sleeve: FL1191B or 6015FB • Nikasil Bore Kit Part # Bore Size Displ. Kit Price (H) • Cylinder sleeving or replating required CALL 80.5mm/+4mm 992cc $492.23 • No cylinder head modification required Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 992cc for: 3 76.5 992 4.00 CALL $137.18 3169KD S423 CW20 Bearing: B1024 Thunder Cat 900 1993-97 x 4.50 CALL $137.18 3189KD Gasket: W5335 65 Con. Rod: NA • Pro-Lite Sleeve: FL1191B or 6015FB • Nikasil Bore Kit Part # Bore Size Displ. Kit Price (H) • Cylinder sleeving or replating required CALL 80.5mm/+4mm 992cc $505.66 • Cylinder head machining required Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Thunder Cat 1000 1998-02 3 81 1000 Std. CALL $122.95 3189KD S539 CW22 Mountain Cat 1000 1998-02 x Pantera 1000 2000-01 64.6 • Pro-Lite Kit Part # Bore Size Displ. • Nikasil Bore CALL 81mm/Std. Bearing: NA Gasket: W5335 Kit Price (H) $462.96 1000cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 1098cc for: 3 81 1098 4.00 CALL $178.03 3347KD S539 CW22 Bearing: NA Thunder Cat 1000 1998-02 x Gasket: W5335 Mountain Cat 1000 1998-02 64.6 Con. Rod: NA Pantera 1000 2000-01 Sleeve: FL1236B or 6057FB • Pro-Lite • Nikasil Bore Kit Part # Bore Size Displ. Kit Price (H) • Cylinder sleeving or replating required CALL 85mm/+4mm 1098cc $582.73 • Cylinder head machining required Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets F1000 Series 2007-09 2 M1000 Series 2007-10 Crossfire 1000 Series 2007-10 • Pro-Lite • Nikasil Bore • Electra Coated 162 90.3 1000 Std. CALL $137.80 9030KJ S598 CW24 x 78 Kit Part # CALL Bore Size 90.3mm/Std. Displ. 1000cc Bearing: Gasket: NA W6587 Kit Price (H) $461.46 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) POLARIS Fuji Motor 2 62 336 0.25 CALL $116.77 2451CS S270 CW16 339 Sprint 1986-89 x 0.50 CALL $116.77 2461CS 340 Sport GT 1989 55.6 1.00 CALL $128.45 2480CS Indy Sport 1988-89 Bearing: B1016 • Cast Iron Bore • Fan Cooled Fuji Motor 2 62 336 0.50 CALL $116.77 2461CS S270 CW16 Lite Touring 1998 x Indy Lite 1991-98 55.6 1.00 CALL $128.45 Indy Lite Deluxe 1998 Indy Lite GT 1996-97 340 Sport GT 1990, 1995-96 340 Indy Sport 1990 339 Sprint FC 1990 Indy 340 1999-00, 2004 Indy 340 Deluxe 1999-03 Indy Sport Touring 1999-00 Indy 340 Touring 2001-04 340 Classic 2003-06 Indy 340 Edge 2003-07 Bearing: Gasket: Con. Rod: Sleeve: B1016 NA NA See listing • EC34-2PM02A • Cast Iron Bore • Cylinder honing required for std. bore Fuji Motor 2 65 398 Std. CALL $133.75 2559CS S280 CW18 400 Indy 1984-91 x Gasket: W5096 60 0.50 CALL $126.04 2579CS • Pro-Lite 1.00 CALL $138.64 2598CS • Cast Iron Bore 1.50 CALL $147.12 2618CS • Liquid Cooled Bearing: B1014 Con. Rod: See listing Sleeve: FL1143 Kit Part # Bore Size Displ. Kit Price (H) CALL 65.5mm/+0.50mm 405cc $306.89 CALL 66mm/+1.00mm 410cc $332.10 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 2 67.75 435 EC44TX 1973-80 x 60 • Sleeving or replating required • Chrome Bore 0.25 0.50 1.50 2.00 CALL CALL CALL CALL $129.75 $129.75 $142.72 $142.72 2677CS S272 CW18 2687CS 2727CS 2746CS Bearing: Gasket: Con. Rod: Sleeve: B1014 NA NA See listing Fuji Motor 2 67.72 432 Std. CALL $129.75 2668CS S272 CW18 Bearing: B1014 440 Indy Trail 1984-86 x 0.28 CALL $129.75 2677CS Gasket: W5101 Trail Deluxe 1993 60 0.53 CALL $129.75 2687CS Con. Rod: See listing Long Track 1984-90 1.53 CALL $142.72 2727CS Sleeve: See listing SS 440 1985-86 2.03 CALL $142.72 2746CS 440 Long Track LTR 1987 Indy XCF 1997-98 440 Long Track Reverse 1988-89 Indy Transport 1996-99 Indy Sport 1991-99 Kit Part # Bore Size Displ. Kit Price (H) Indy Sport SKS 1994 Indy Sport GT 1991-92 CALL 67.72mm/Std. 432cc $304.01 Sport Touring 1995-99 CALL 68.25mm/+0.53mm 439cc $304.01 Super Sport 1994-97 CALL 69.25mm/+1.53mm 452cc $329.95 Indy Tran Sport 1999 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Cast Iron Bore • Fan Cooled • Single Ring www.recreationsupply.ca 163 Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (G) (G) (G) POLARIS Fuji Motor 2 67.72 432 Std. CALL $126.21 2668CD S459 CW18 Bearing: B1014 440 Indy Trail 1984-86 x 0.53 CALL $133.93 2687CD Gasket: W5101 Trail Deluxe 1993 60 1.53 CALL $138.84 2727CD Long Track 1984-90 SS 440 1985-86 440 Long Track LTR 1987 Indy XCF 1997-98 440 Long Track Reverse 1988-89 Indy Transport 1996-99 Kit Part # Bore Size Displ. Kit Price (G) Indy Sport 1991-99 CALL 67.72mm/Std. 432cc $296.94 Indy Sport SKS 1994 CALL 68.25mm/+0.53mm 439cc $296.94 Indy Sport GT 1991-92 CALL 69.25mm/+1.53mm 452cc $322.18 Sport Touring 1995-99 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Super Sport 1994-97 Indy Tran Sport 1999 • Pro-Lite • Cast Iron Bore • Fan Cooled • Double Ring Fuji Motor 2 67.72 432 Std. CALL $126.21 2668CD S459 CW18 Bearing: B1014 Cross Country 440 1995-96 x 0.53 CALL $133.93 2687CD Gasket: W5412 Indy 440 1992-98 60 1.53 CALL $138.84 2727CD Con. Rod: See listing XCR440 1992-94 Indy XC440 1991 Indy 440 LC 1996-97 Kit Part # Bore Size Displ. Kit Price (G) 440 Indy SKS 1993-95 CALL 67.72mm/Std. 432cc $318.16 CALL 68.25mm/+0.53mm 439cc $318.16 • EC45-PL091 CALL 69.25mm/+1.53mm 452cc $343.41 • Pro-Lite Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Cast Iron Bore • Liquid Cooled Fuji Motor 2 68.25 439 Std. CALL $118.98 2687CD S459 CW18 Indy XCR440 1995-96 x XCR440 SP 1994, 1996 60 Indy XC440 1996-97 • Pro-Lite • Nikasil Bore • Liquid Cooled Note: Will not fit XCR440 1997 Kit Part # CALL Bore Size 68.25mm/Std. Displ. 439cc Bearing: Gasket: Con. Rod: Sleeve: B1014 W5554 See listing See lisitng Kit Price (G) $303.69 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 66 438 Std. CALL $128.15 2598CD S423 CW20 Bearing: B1039 XCR440 1998-99 x Gasket: W5709 64 Con. Rod: See listing • Pro-Lite • Nikasil Bore Kit Part # Bore Size Displ. Kit Price (G) • Liquid Cooled CALL 66mm/Std. 438cc $331.05 Note: Will not fit XCR Edge Motor Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 66 438 Std. CALL $151.85 2598CD S423 CW20 Bearing: B1039 440 Pro X 2001-2004 x Gasket: 2001-02: TBA 440 IQ 2005-07 64 2003-04: W6202 • Pro-Lite • Nikasil Bore • Liquid Cooled Kit Part # CALL Bore Size 66mm/Std. Displ. 438cc Kit Price (G) $386.80 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 164 www.recreationsupply.ca Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) Optional Accessories Bearings & Gaskets are all Top End POLARIS Fuji Motor 2 72 488 Std. CALL $148.09 2835CD S459 CW18 Bearing: B1014 488 Trail RMK 1998 x 0.25 CALL $148.09 2844CD Gasket: W5099 Classic Touring 1998 60 0.50 CALL $148.09 2854CD Con. Rod: See listing Indy Trail 1986-99 1.00 CALL $162.89 2874CD Sleeve: FL1148 Indy Trial Touring 1995-99 1.50 CALL $162.89 2894CD Super Sport 1997-98 Kit Part # Bore Size Displ. Kit Price (H) Super Track 1991-94 CALL 72mm/Std. 488cc $338.93 Trail Deluxe 1995-96 CALL 72.5mm/+0.5mm 496cc $338.93 • EC50PM043, EC50PPM051 CALL 73mm/+1mm 502cc $368.54 • Pro-Lite CALL 73.5mm/+1.5mm 509cc $368.54 • Cast Iron Bore Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Fan Cooled Note: Will not fit Widetrack Models Fuji Motor 2 72 488 500 Indy 1989-97 x 500 Indy Classic 1989-97 60 500 Indy RMK 1996-97 500 SKS 1991-97 500 Indy EFI 1992-97 Kit Part # • EC45PL097 CALL • Pro-Lite CALL • Cast Iron Bore CALL • Liquid Cooled Std. 0.25 0.50 1.00 1.50 CALL CALL CALL CALL CALL $148.09 $148.09 $148.09 $162.89 $162.89 Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm 73.5mm/+1.5mm CALL 2835CD S459 CW18 2844CD 2854CD 2874CD 2894CD Bearing: Gasket: Con. Rod: Sleeve: Displ. 488cc 495cc 502cc 509cc B1014 W5153 See listing FL1165 Kit Price (H) $350.99 $350.99 $380.61 $380.61 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Note: Will not fit Widetrack Models Fuji Motor 2 72 488 500 Indy RMK 1998-99 x 500 Classic 1998-02 60 500 Classic Touring 1999-03 500 Classic 2004-06 500 Indy 1998-06 • EC45PL097 • Pro-Lite • Cast Iron Bore • Liquid Cooled Std. 0.25 0.50 1.00 1.50 CALL CALL CALL CALL CALL $148.09 $148.09 $148.09 $162.89 $162.89 2835CD S459 CW18 2844CD 2854CD 2874CD 2894CD Bearing: Gasket: Con. Rod: Sleeve: B1014 W5153 See listing FL1165 Std. 0.50 1.00 1.50 2.00 CALL CALL CALL CALL CALL $137.25 $137.25 $160.21 $160.21 $160.21 2776CD S423 CW20 2795CD 2815CD 2835CD 2854CD Bearing: Gasket: Con. Rod: Sleeve: B1039 W5711 See listing FL1254 Note: Will not fit Widetrack Models Liberty Motor 2 70.5 500 Indy 500 XC 1999-02 x Indy 500 XC SP 1999-07 64 500 Classic 2003 Indy RMK 2000-02 • Pro-Lite • Liquid Cooled Note: Fits Cast Iron & Nikasil bore. Sleeving or replating required for Nikasil over sizes. Kit Part # Bore Size Displ. Kit Price (H) CALL 70.5mm/Std. 500cc $349.24 CALL 71mm/+0.5mm 507cc $349.24 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 2 73 544 Std. CALL $137.55 2874KD S278 CW18 550 Classic 2003-04 x 0.50 CALL $137.55 2895KD Indy 550 Sport Touring 1999-05 65 1.00 CALL $151.31 2913KD Indy Super Sport 550 1999-03 Kit Part # Bore Size Displ. Indy 550 Trail RMK 1999-08 CALL 73mm/Std. 544cc Indy 550 Trail Touring 2000, 2003-09 • Pro-Lite • Cast Iron Bore CALL CALL 73.5mm/+0.5mm 74mm/+1mm Kit Price (H) $339.53 $339.53 $367.04 552cc 559cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 64 579 580 Indy XLT 1993-94 x XLT Special 1993-94 60 • Pro-Lite • Cast Iron Bore Kit Part # Bearing: B1014 Gasket: W5946 CALL CALL CALL CALL Std. 0.50 1.00 2.00 CALL CALL CALL CALL $136.09 $136.09 $149.70 $149.70 Bore Size 64mm/Std. 64.5mm/+0.5mm 65mm/+1mm 66mm/+2mm 2520CD S255 CW16 2539CD 2559CD 2598CD Displ. 579cc 586cc 597cc 616cc Bearing: Gasket: Con. Rod: Sleeve: NA W5336 NA 6028FA Kit Price (H) $460.18 $460.18 $501.00 $501.00 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca 165 Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) POLARIS Fuji Motor 3 65 597 Std. CALL $137.55 2559CD S255 CW16 Bearing: NA Indy XLT600 1995-97 x 0.50 CALL $137.55 2579CD Gasket: W5444 XLT/SKS 600 1996 60 1.00 CALL $151.31 2598CD Con. Rod: See listing XLT Special 1997-99 1.50 CALL $151.31 2618CD Sleeve: See listing XLT Classic 1998-99 Kit Part # Bore Size Displ. Kit Price (H) XLT Touring 1996-99 CALL 65mm/Std. 597cc $486.80 XCR600 1995-97 CALL 65.5mm/+0.5mm 607cc $486.80 XLT/RMK 1996-97 CALL 66mm/+1mm 616cc $528.08 XC700 Triple 1997 Indy Triumph 2000 CALL 66.5mm/+1.5mm 625cc $528.08 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Piston port motor • Pro-Lite • Cast Iron Bore Fuji Motor 3 62.5 598 Std. CALL $141.49 2461CD S477 CW18 Bearing: B1014 XCR600 SP 1996-98 x Gasket: W5499 XCR600 SE 1997 65 Con. Rod: See listing • EC59PL01, EC59PL02 Kit Part # Bore Size Displ. Kit Price (H) • Reed Induction CALL 62.5mm/Std. 598cc $498.64 • Pro-Lite Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Nikasil Bore Fuji Motor 3 65 597 Std. CALL $143.20 2559CS S280 CW18 Bearing: 600 Indy 1984-87 x 0.50 CALL $143.20 2579CS Gaskets: 60 1.00 CALL $157.49 2598CS • CALL uses W5100 gasket 1.50 CALL $157.49 2618CS Con. Rod: • Pro-Lite • Cast Iron Bore Kit Part # Bore Size Displ. CALL CALL CALL 65mm/Std. 65.5mm/+0.5mm 66.5mm/+1.5mm 597cc 607cc 625cc B1014 65-66mm: W5260 66.5mm: W5100 See listing Kit Price (H) $493.04 $493.04 $537.89 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 65 648 2.75 CALL $168.49 2668CS S459 CW18 OVERBORE to 648cc for: x 3.00 CALL $168.49 2677CS 600 Indy 1984-87 60 • Pro-Lite • Cast Iron Bore • Cylinder sleeving required Bearing: Gasket: Con. Rod: Sleeve: B1014 W5100 See listing FL1129H Liberty Motor 2 74.5 593 Std. CALL $131.00 2933KD S631 CW20 600 XC 1998-99 x 600 XC Deluxe 45th Anniv. 2000 68 600 RMK 1998-03 600 XC SP 1999 Kit Part # Bore Size Displ. Indy 600 Classic 2001 Bearing: Gasket: B1039 W5600 • Pro-Lite • Nikasil Bore CALL 74.5/Std. 593cc Kit Price (H) $339.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 77.25 600 Std. CALL $145.63 3040KD S650 CW20 Bearing: NA 600 Classic Touring 2001-02 x Gasket: W6082 600 Edge Touring 2004-06 64 600 Fusion 2006 600 Pro X 2004 600 Touring 2000, 2005 Kit Part # Bore Size Displ. Kit Price (H) 600 Switchback 2004-07 600 VES XC/SP 2000-05 CALL 77.25/Std. 600cc $365.41 Indy 600 Classic 2001-06 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets RMK Series 2000, 2004-07 600 HO IQ/Dragon/Shift/Touring 2007-09 • Electra Coated • Pro-Lite • Nikasil Bore 166 www.recreationsupply.ca Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) POLARIS 600 Std. CALL $145.63 3040KD Fuji Motor 3 67.75 649 650 Indy thru 1990 x 650 RXL 1990 60 650 SKS 1991-96 • Pro-Lite • Cast Iron Bore Kit Part # • Must bore cases to install 1.50 & CALL 2.25 oversizes. Std. 0.25 0.50 1.00 1.50 2.25 CALL CALL CALL CALL CALL CALL $136.09 $136.09 $136.09 $149.70 $149.70 $149.70 2668CD S459 CW18 Bearing: 2677CD Gaskets: 2687CD 2707CD Con. Rod: 2727CD Sleeve: 2756CD 600 HO IQ 2007-09 600 HO LX, IQ 2007 600 HO Switchback 2007 600 HO Touring 2007 600 IQ Dragon 2008-09 600 IQ Shift, IQ Touring 2008-09 • Pro-Lite • Nikasil Bore 2 77.25 Bore Size 67.75mm/Std. 68.25mm/+0.5mm 68.75mm/+1mm 69.25mm/+1.5mm 70mm/+2.25mm CALL CALL CALL CALL S650 CW20 Gaskets: W6082 Displ. 649cc 658cc 668cc 678cc 693cc B1014 67.75-69.25mm: W5102 70mm: W5251 NA See listing Kit Price (H) $482.43 $482.43 $523.25 $523.25 $523.25 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 67.75 649 650 Indy RXL 1991-97 x 654 650 EFI 1991-96 60 658 650 Indy 1991-96 668 678 • Pro-Lite 693 • Cast Iron Bore Kit Part # • Must bore cases to install 2.25 CALL CALL CALL CALL CALL Std. 0.25 0.50 1.00 1.50 2.25 (For 650 Indy thru 1990; 650 RXL 1990 ONLY) CALL CALL CALL CALL CALL CALL $136.09 $136.09 $136.09 $149.70 $149.70 $149.70 Bore Size 67.75mm/Std. 68.25mm/+0.5mm 68.75mm/+1mm 69.25mm/+1.5mm 70mm/+2.25mm 2668CD S459 CW18 Bearing: 2677CD Gaskets: 2687CD 2707CD Con. Rod: 2727CD Sleeve: 2756CD Displ. 649cc 658cc 668cc 678cc 693cc CALL 67.5mm/+1.1mm 698cc Bearing: Gasket: Con. Rod: Sleeve: B1014 W5505 See listing FL1211 Kit Price (H) $505.30 $399.95 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 700 Classic 2006 2 77.5 755 Std. CALL $143.99 3057KD S640 CW22 700 Fusion 2006 x 700 RMK 2006 80 775 CALL $143.99 3091KD 700 Touring 2006 Dedicated forging Race proven designs Semi-keystone chrome ring Electra coated, CNC Machined Skirt coated, Light Weight Kit Price (H) $482.43 $482.43 $523.25 $523.25 $523.25 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 66.6 680 Std. CALL $137.50 2623CD S280 CW18 680 Ultra 1996-98 x Ultra SP 1996-97 65 698 1.10 CALL $145.99 2658CD Ultra SPX 1997 Ultra SKS 1997 Kit Part # Bore Size Displ. Ultra SE 1997 CALL 66.6mm/Std. 680cc Ultra Touring 1998 • Pro-Lite • Nikasil Bore B1014 67.75-69.25mm: W5306 70mm: W5313 See listing See listing Kit Part # CALL CALL Bore Size Displ. 77.5mm/Std. 754cc 78.5mm/+1.0mm Bearing: NA Gasket: W6597 Kit Price (H) $395.85 $395.85 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 81 700 Std. CALL $148.02 3189KD S512 CW20 Bearing: B1039 XC700 1998-03 x 0.50 CALL $148.02 3207KD Gasket: W5550 XC700 SP 1999-05 68 1.00 CALL $148.02 3227KD Con. Rod: NA 700 Classic 2001-04 Sleeve: 6058FA 700 Classic Touring 2003-04 700 Pro X 2003-04 Kit Part # Bore Size Displ. Kit Price (H) 700 Pro X2 2004 CALL 81mm/Std. 700cc $371.67 700 Switchback 2004 CALL 81.5mm/+0.5mm 709cc $371.67 700 RMK 1997-04 CALL 82mm/+1.0mm 718cc $371.67 700 SKS 1999-03 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Nikasil Bore www.recreationsupply.ca 167 Snowmobile Pistons & Kits for Polaris No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) POLARIS Liberty Motor OVERBORE to 754cc for: 2 81 754 3.00 CALL $148.63 3307KD S512 CW20 Bearing: B1031 XC700 1998-03 x Gasket: W5550 XC700 SP 1999-05 68 Con. Rod: NA 700 Classic 2001-04 Sleeve: 6058FB 700 Classic Touring 2003-04 700 Pro X 2003-04, 700 Pro X2 2004 Kit Part # Bore Size Displ. Kit Price (H) 700 Switchback 2004, 700 RMK 1997-04 CALL 84mm/+3mm 754cc $371.67 700 SKS 1999-03 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Nikasil Bore • Cylinder sleeving or replating required • Cylinder head machining required • Crankcase cleanup required Fuji Motor 3 67.6 700 Std. CALL $137.55 2658KD S477 CW18 Bearing: 700 XCR 1999 x Gasket: 65 Con. Rod: • Pro-Lite • Nikasil Bore Kit Part # Bore Size Displ. 700 Dragon 2007 700 Dragon RMK 2007 EC • NB • PL CALL 67.6mm/Std. 700cc B1031 W5714 See listing Kit Price (H) $501.34 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 2 81 700 Std. CALL $166.80 3189KD S631 x 68 Kit Part # CALL Bore Size 81mm/Std. Displ. 700cc Kit Price (H) $422.29 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 72 794 Indy Storm 800 1994-98 x XPS Series 65 • Pro-Lite • Sleeving or replating required for oversizes Kit Part # • CALL uses W5452 Gasket Kit CALL Note: 1996-98 models have Nikasil Bore CW20 Gasket: W6592 Bottom End Gasket Kit: WB1161 Std. 0.50 1.00 1.50 2.00 CALL CALL CALL CALL CALL CALL CALL CALL CALL $147.51 $147.51 $162.27 $162.27 $162.27 Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm 73.5mm/+1.5mm 75mm/+2mm 2835CD S511 CW18 Bearing: 2854CD Gaskets: 2874CD 2894CD Con. Rod: 2953TD Sleeve: Displ. 794cc 805cc 816cc 827cc 861cc B1014 72-73.5mm: W5408 75mm: W5452 See listing See listing Kit Price (H) $512.13 $512.13 $556.39 $556.39 $556.39 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Fuji Motor 3 72 794 Std. CALL $145.03 2835CD S511 CW18 Bearing: B1014 800 XCR 1999-02 x Gaskets: W5728 XPS Series 65 Con. Rod: See listing • Pro-Lite • Nikasil Bore Kit Part # CALL Bore Size 72mm/Std. Displ. 794cc Kit Price (H) $509.84 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 85 794 Std. CALL $141.57 3347KD S640 CW22 Bearing: B1030 Indy 800 LE 2001 x 0.50 CALL $144.28 3367KD Gaskets: W5943 Indy 800 Snow Check Special 2001 70 1.00 CALL $144.28 3385KD Indy 800 XC SP 2001-05 800 Pro X 2003-04, 800 Pro X2/XR 2004 Kit Part # Bore Size Displ. Kit Price (H) 800 Switchback 2004-05 CALL 85mm/Std. 784cc $360.89 800 Classic 2004 CALL 85.5mm/+0.5mm 804cc $366.32 800 Edge Touring 2004-05 CALL 86mm/+1.0mm 813cc $366.32 800 SKS 2003 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 800 RMK 2000, 2002-05 • Pro-Lite • Nikasil Bore Dragon 800 2009 2 EC • PL • SC 85 Std. x 70 Kit Part # SK1382 CALL $141.57 3347KD S694 Bore Size 85mm/Std. CW22 Gaskets: Displ. – W6377 Kit Price (H) Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Liberty Motor 2 83 866 Std. CALL $130.90 3268KD S640 CW22 900 Fusion 2005-06 x 887 1.00 CALL $130.90 3307KD 900 RMK Series 2005-06 80 900 Switchback 2005-06 Kit Part # CALL CALL Bore Size 83mm/Std. 84mm/+1.00 Displ. 866cc 887cc Bearing: Gasket: NA W6377 Kit Price (H) $369.66 $369.66 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 168 www.recreationsupply.ca Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 253 Engine Type 1 72 248 Tundra LT 1986-92 x Tundra 1985-88 61 3500 1979-84 Citation LS & LSE 1985-91 Citation 3500 1980-84 Skandic 277 1983 Std. 0.50 1.00 1.50 CALL CALL CALL CALL $147.51 $147.51 $162.25 $162.25 2835LK S513 CW18 2854LK 2874LK 2894LK Bearing: B1003 Std. 0.25 0.50 1.00 CALL CALL CALL CALL $122.32 $122.32 $122.32 $134.54 2441CD S477 CW18 2451CD 2461CD 2480CD Bearing: Gasket: Con. Rod: Sleeve: B1003 NA NA FL1118 440 Engine Type 2 67.5 436 Std. CALL $131.05 2658LT S513 CW18 9500 Series 1979-82 x 0.50 CALL $131.05 2677LT 61 • Liquid Cooled • Cast Iron Bore Bearing: Gasket: Con. Rod: Sleeve: B1003 NA See listing 454 Engine Type 2 67.5 437 Std. CALL $143.27 2658LK S477 CW18 Cross Country MXZ440 1995-98 x 0.50 CALL $143.27 2677LK 61 • Pro-Lite • Nikasil Bore • Liquid Cooled Kit Part # Bore Size Displ. Bearing: Gasket: B1033 W5449 • Fan Cooled • Pro-Lite • Cast Iron Bore 377 Engine Type 2 62 368 Touring E 1996-00 x Touring E LT 1997 61 Formula S 1996, 1999-00 Nordic 377 1981-84 Formula S Electric 1998 Formula Deluxe 1999-02 Safari 377 1984-94 Formula S 2000 Skandic 377 1983 Skandic 380 1998-00 4500 Citation 1979-83 Legend Fan 2003-04 GSX Fan 2005-06 GTX Fan 2006 Grand Touring 380F 2001-04 MXZ 380 2001-06 • Fan Cooled • Cast Iron Bore CALL CALL 67.5mm/Std. 68mm/+0.5mm Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 453 Engine Type 2 65 437 Std. CALL $146.02 6500KE S280 CW18 MXZ 440 1999-03 x 65.8 • Pro-Lite • Nikasil Bore • Liquid Cooled Kit Part # Bore Size Displ. CALL 65mm/Std. • Cast Iron Bore Bearing: Gasket: NA W6204 Kit Price (H) $351.60 437cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 467 Engine Type 2 69.5 463 Std. CALL $137.59 Formula XT 1994 x 0.25 CALL $137.59 Formula SS 1985 61 0.50 CALL $137.59 Formula MX 1985-95 1.00 CALL $151.35 Formula GLX 1990 Formula MXZ 1993-94 SS25SP 1984 Kit Part # Bore Size Kit Price (H) $338.45 $338.45 437cc 442cc CALL CALL CALL 69.5mm/Std. 70mm/+0.5mm 70.5mm/+1mm 2736CD S272 CW18 2746CD 2756CD 2776CD Displ. 463cc 469cc 475cc Bearing: Gasket: B1003 W3991 Kit Price (H) $327.09 $327.09 $354.61 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca 169 Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 503 Engine Type 2 72 497 Std. CALL $147.51 2835LK S513 CW18 Bearing: Formula SL 1996-99 x 0.50 CALL $147.51 2854LK Gasket: Touring SLE 1995-99 61 1.00 CALL $162.25 2874LK Con. Rod: Skandic 500 1996-02 1.50 CALL $162.25 2894LK Sleeve: Skandic 500 1987-94, 1997 Kit Part # Bore Size Displ. Voyager 1989, Everest 550, 500E 1980-83 CALL 72.5mm/+0.5mm 506cc Cheyenne 1989-91, Alpine 500 1983-90, 1994 Safari LC 1986-94, Escapade 1987-89 CALL 73.5mm/+1.5mm 518cc 5500 1980-84, Skandic WT, SWT 1996-03 Kit Includes: Matched & balanced forged pistons, rings, taper wall wrist pins & circlips NOTE: Top End gasket not included in kit Blizzard MX 5500 1979-84 Safari 503, Formula Deluxe 500 1999-01 Touring Fan 500 2001, MXZ500 Fan 2001-02 Summit 500 Fan 2001-02 Grand Touring F 2001-02 Grand Touring Cargo F 2001, Skandic Sport 2003 • Pro-Lite • Cast Iron Bore B1003 NA CR112 See listing Kit Price (H) $303.68 $334.03 494 Engine Type 2 69.5 499 Std. CALL $143.50 2736CD S511 CW18 Bearing: NA Formula 500 Deluxe LC 1998-00 x 0.50 CALL $143.50 2756CD Gasket: W5545 Summit 500 1997-00 65.8 1.00 CALL $157.84 2776CD Con. Rod: NA MXZ 500 1998-99 Sleeve: FL1224 MXZ Trail 500 2001 Kit Part # Bore Size Displ. Kit Price (H) Grand Touring 500 1998-99 CALL 69.5mm/Std. 499cc $347.52 Skandic WT LC 1998-99 Formula Z 500 1999, Formula 500 LC 2000 CALL 70mm/+0.5mm 506cc $347.52 Touring 500 LC 2000 CALL 70.5mm/+1mm 512cc $376.21 Grand Touring Std. 500 2001 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Cast Iron Bore • Liquid Cooled Note: Fits rotary valve motor only 493 Engine Type 2 69.5 499 Std. CALL $151.58 2736CS S391 CW18 Bearing: MXZ 500 2000-03 x 0.50 CALL $151.58 2756CS Gasket: MXZ 500 Trail 2001 65.8 1.00 CALL $166.74 2776CS Formula DLX 500 2001 Grand Touring 500 2001-03 Kit Part # Bore Size Displ. Legend 500 2002-03 • Cylinder Reed Motor • Pro-Lite • Liquid Cooled • Cast Iron Bore CALL CALL CALL 69.5mm/Std. 70mm/+0.5mm 70.5mm/+1mm Std. 0.50 1.00 1.50 Kit Part # CALL CALL CALL CALL CALL CALL CALL CALL $147.51 $147.51 $162.25 $162.25 Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm 73.5mm/+1.5mm 2835LK S513 CW18 2854LK 2874LK 2894LK Bearing: Gasket: Con. Rod: Sleeve: Displ. 521cc 528cc 535cc 543cc B1003 W3991 CR113 See sleeve listing Kit Price (H) $346.93 $346.93 $376.42 $376.42 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 536 Engine Type 2 72 521 Formula Plus 1989-91 x 64 • Pro-Lite • Cast Iron Bore Kit Price (H) $380.48 $380.48 $410.80 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 537 Engine Type 2 72 521 Formula Plus 1986-88 x 64 • Pro-Lite • Cast Iron Bore 499cc 506cc 514cc NA W6098 Kit Part # CALL CALL CALL CALL Std. 0.50 1.00 1.50 CALL CALL CALL CALL $147.51 $147.51 $162.25 $162.25 Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm 73mm/+1.5mm 2835LK S513 CW18 2854LK 2874LK 2894LK Displ. 521cc 528cc 535cc 543cc Bearing: Gasket: Con. Rod: Sleeve: B1003 W5255 See listing FL1172 Kit Price (H) $346.93 $346.93 $376.42 $376.42 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 550F Engine Type 2 76 552 Std. CALL $150.44 2992KD S631 CW20 Bearing: NA GSX/GTX 2005-08 x 0.50 CALL $150.44 3012KD Gasket: W6614 Expedition Sport 2005-08 61 1.00 CALL $150.44 3032KD Freestyle Backcountry 550 2007-08 Freestyle Park 2007-08 Kit Part # Bore Size Displ. Kit Price (H) Freestyle Session 2007 CALL 76mm/Std. 552cc $364.13 Grand Touring 550 2003 CALL 76.5mm/+0.5mm $364.13 Skandic 04-08, Legend 550 2003-04 CALL 77mm/+1mm $364.13 MX Z 550F, Summit 2003-08 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Cast Iron Bore 170 www.recreationsupply.ca Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Clips see page 180 Pin Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 582 Engine Type 2 76 581 Std. CALL $151.58 2992LT S477 CW18 Formula Plus MX 1993 X 0.50 CALL $151.58 3012LT Formula Plus EFI 1993 64 1.00 CALL $166.74 3032LT Formula Plus 1992-93 1.50 CALL $166.74 3051LT Formula Grand Tour 1993 2.00 CALL $166.74 3071LT Grand Touring XTC 1994 Kit Part # Bore Size Displ. Grand Touring 583 1995-99 • Pro-Lite • Cast Iron Bore Bearing: Gasket: Con. Rod: Sleeve: B1003 W5312 CR113 See listing Kit Price (H) CALL 76mm/Std. 581cc $355.07 CALL 76.5mm/+0.5mm 588cc $355.07 CALL 77mm/+1mm 596cc $385.39 CALL 77.5mm/+1.5mm 604cc $385.39 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 583 Engine Type 2 76 581 Std. CALL $151.58 2992LT S477 CW18 Bearing: B1003 Mach I Rave Valve 1989-90 x 0.50 CALL $151.58 3012LT Gasket: W5250 Formula Plus X 1993 64 1.00 CALL $166.74 3032LT Con. Rod: CR113 Formula STX 1.50 CALL $166.74 3051LT Sleeve: See listing STX Z 1994-96 2.00 CALL $166.74 3071LT Formula Z 1994-99 Kit Part # Bore Size Displ. Kit Price (H) MXZ 583 thru 1998 CALL 76mm/Std. 581cc $363.96 Formula 583 1997 CALL 76.5mm/+0.5mm 588cc $363.96 Summit 583 1994-97 CALL 77mm/+1mm 596cc $394.28 GT 583 1997-98 583-Z 1998 CALL 77.5mm/+1.5mm 604cc $394.28 Formula DL 1998 CALL 78mm/+2mm 611cc $394.28 • Pro-Lite Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Cast Iron Bore 599 Engine Type 3 64.5 598 Std. CALL $147.24 2539CD S459 CW18 600 Formula III 1996-99 x Formula III LT 1997 61 • Pro-Lite Kit Part # Bore Size Displ. • Nikasil Bore CALL 64.5mm/Std. 598cc Bearing: Gasket: Con. Rod: Sleeve: NA W5502 NA 6074FA Kit Price (H) $511.27 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 593 H.O. Engine Type 2 72 594 Std. CALL $149.95 2834KA S631 CW20 Bearing: NA 600 H.O. (Std. & RER) (Coated & Uncoated) x Gasket: W6181 MXZ REVX 2003, 73 Std. CALL $182.44 MXZ X 2004-06 Premium Series MXZ Adrenaline 2003-09 Skirt Coated Piston MXZ Renegade 2003-09 Summit Adrenaline 2003-09 Kit Part # Bore Size Displ. Kit Price (H) Grand Touring 2003 GSX 2004-09 CALL (CALL) 72mm/Std. 594cc $299.95 GTX Limited/Sport 2006-09 CALL (CALL) Premium Series Skirt Coated Piston) $417.72 Legend 2004 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Expedition TUV 2005-06 • Pro-Lite, Nikasil Bore 593 Engine Type 2 76 597 Std. CALL $154.53 2992KA S631 CW20 Bearing: B1031 Formula Deluxe 600 2000-01 x 0.50 CALL $154.53 3012KA Gasket: W5717 Formula Deluxe GSE 2001 65.8 1.00 CALL $169.98 3032KA Grand Touring 2000-01, SE 2002 Grand Touring GS 2002 MXZ Adrenaline 600 2001 MXZ Adrenaline (500 SS) 2005-06 MXZ 600 1999-01, MXZ X 600 2001 MXZ Trail 600 2001, 2003-04 Kit Part # Bore Size Displ. Kit Price (H) MXZ Trail (500 SS) 2004-09 CALL 76mm/Std. 597cc $403.68 Skandic WT LC 2001-04 CALL 76.5mm/+0.5mm 605cc $403.68 Sport 2002, Grand Touring SE 2003 CALL 77mm/+1mm 613cc $434.59 Summit 600 1999-01, Skandic SUV 2003-04 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Legend Sport 600 RER 2003 GSX Sport (500 SS) 2005-09 GTX Sport (500 SS) 2006 MXZ TNT 500SS 2008-09 • Pro-Lite, Cast Iron Bore www.recreationsupply.ca 171 Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End see page 180 Pin Cyl. x (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 643 Engine Type 2 76 617 Mach I Rave Valve LC 1991-92 x Formula Z 1994 68 • Pro-Lite • Cast Iron Bore Std. 0.50 1.00 1.50 2.00 CALL CALL CALL CALL CALL $151.58 $151.58 $166.74 $166.74 $166.74 2992LT S477 CW18 3012LT 3032LT 3051LT 3071LT Bearing: Gasket: Con. Rod: Sleeve: B1003 W5248 CR113 6031FA Kit Part # Bore Size Displ. Kit Price (H) CALL 76mm/Std. 617cc $355.07 CALL 76.5mm/+0.5mm 625cc $506.65 CALL 77mm/+1mm 632cc $385.39 CALL 77.5mm/+1.5mm 640cc $385.39 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 670 Engine Type 2 78 669 Std. CALL $159.16 3071LK S631 CW20 MXZ 670 1996-98 x 0.50 CALL $159.16 3091LK Formula SS 1994-95 70 1.00 CALL $175.08 3110LK Formula Z 670 1998-99 Mach I 1996 Formula Mach I 1993-95 Kit Part # Bore Size Displ. Summit 670 1995-97 CALL 78mm/Std. 669cc Grand Touring SE 1994-95 CALL 78.5mm/+0.5mm 677cc Formula Deluxe 670 1999 • Pro-Lite • Cast Iron Bore CALL 79mm/+1mm Bearing: Gasket: Con. Rod: Sleeve: NA W5338 See listing 6031FA Kit Price (H) $373.67 $373.67 $405.51 685cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 739cc for: 2 78 739 4.00 CALL $180.74 3228KD S461 CW20 670 Engine Type x MXZ 670 1997-99 70 Formula SS 1994-95 Formula Z 670 1998-99 Mach I 1996 Formula Mach I 1993-95 Summit 670 1995-97 Grand Touring SE 1994-95 Formula Deluxe 670 1999 Bearing: Gasket: Con. Rod: Sleeve: NA W5730 See listing 6031FB • Pro-Lite • Cast Iron Bore • Must bore engine cases • Cylinder sleeving required • Cylinder head machining required 670 HO Engine Type 2 78 669 Std. CALL $159.16 3071LK S631 CW20 Bearing: Summit X 1998-99 x 0.50 CALL $159.16 3091LK Gasket: MXZ 670 HO 1999 70 1.00 CALL $175.08 3110LK • Pro-Lite Kit Part # Bore Size Displ. • Cast Iron Bore CALL CALL CALL 78mm/Std. 78.5mm/+0.5mm 79mm/+1.00mm 669cc 678cc 686cc 172 Kit Price (H) $373.67 $373.67 $405.51 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 699 Engine Type 3 69.75 699 Std. CALL $144.48 2746CD S511 CW18 Formula Mach I 1997-98 x Mach I 1999-00 61 Formula III 700 1998-00 Grand Touring SE 1997-98 Kit Part # Bore Size Displ. Grand Touring 700 1998-00 • Pro-Lite • Nikasil Bore NA W5338 Bearing: Gasket: Con. Rod: Sleeve: NA W5546 NA FL1225 Kit Price (H) CALL 69.75mm/Std. 699cc $503.04 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 693 Engine Type 2 78 700 Std. CALL $170.37 3071KA S461 CW20 Bearing: B1031 Formula Deluxe GS x 0.50 CALL $170.37 3091KA Gasket: W5945 GSE 700 2000-01 73 1.00 CALL $170.37 3110KA Formula Z 700 2000 Grand Touring GS 700 2001-02 Grand Touring Sport 2002-03 Kit Part # Bore Size Displ. Kit Price (H) Grand Touring SE 2003 CALL 78mm/Std. 700cc $404.58 MXZ 700 2000-02 CALL 78.5mm/+0.5mm 707cc $404.58 MXZ Adrenaline 700 2001, 2003 CALL 79mm/+1.0mm 716cc $404.58 MXZ Trail 700 2001 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets MXZ Renegade 700 2002 MXZ X 700 2001 MXZ 700 RER 2002 Legend Sport 700 RER 2003-04 Legend SE 2003-04 Legend GT Sport 2004 Legend GT SE 2004 Summit 700 2000 Summit High Mark 2000, 2003 Summit X 700 2001 -03 Summit Sport 700 RER 2002 Summit Adrenaline RER 700 2003 • Pro-Lite • Nikasil Bore 779 Engine Type 3 69.5 774 Formula Mach Z 1993-96 x Mach ZLT 1996 68 • Pro-Lite • Cast Iron Bore Kit Part # CALL CALL CALL CALL CALL Std. 0.50 1.00 1.50 2.00 CALL CALL CALL CALL CALL $155.24 $155.24 $155.24 $170.76 $170.76 Bore Size 69.5mm/Std. 70mm/+0.5mm 70.5mm/+1mm 71mm/+1.5mm 72mm/+2mm 2736CD S511 CW18 2756CD 2776CD 2795CD 2835CD Displ. 774cc 784cc 794cc 806cc 830cc B1014 W5339 See listing FL1193 Kit Price (H) $535.32 $535.32 $535.32 $581.86 $581.86 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets OVERBORE to 889cc for: 3 69.5 889 5.00 CALL $157.26 2933TD S459 CW18 779 Engine Type x Formula Mach Z 1993-96 68 Mach ZLT 1996 • Pro-Lite • Cast Iron Bore • Cylinder sleeving required • Cylinder head machining required Bearing: Gasket: Con. Rod: Sleeve: Kit Part # CALL Bore Size 74.5mm/+5mm Bearing: Gasket: Con. Rod: Sleeve: Displ. 889cc B1014 W5339 See listing 6059FB Kit Price (H) $541.37 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 800 Engine Type 2 82 797 Std. CALL $188.91 3228KA S568 CW28 Bearing: NA GSX LTD 2008 x Gasket: W5940 MX Z Adrenaline 2008-09 75.5 MX Z Renegade 2008 MX Z Renegade X 2008 Summit 2008 Kit Part # Bore Size Displ. Kit Price (H) Summit Everest, Power Tek 2008-09 CALL 82mm/Std. 797cc $474.05 Summit X 2007-08, Power Tek 2009 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Dedicated forging, Race proven designs Semi-keystone chrome ring Electra coated, CNC Machined Skirt coated, Light Weight 809 Engine Type (CD-Ring version) 3 70.5 796 Std. CALL $155.24 2776CD S511 CW18 Formula Mach Z 1997-98 x Grand Touring SE 1999-01 68 Mach Z 1999-01 Mach ZLT 1997-98 Mach Z Tech Plus 2001-03 Kit Part # Bore Size Displ. Mach Z Sport 2002 • Rave Valve • Pro-Lite • Nikasil Bore • Liquid Cooled CALL 70.5mm/Std. 796cc Bearing: Gasket: Con. Rod: Sleeve: B1003 W5547 See listing 6060FA Kit Price (H) $535.32 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca 173 Snowmobile Pistons & Kits for Ski-Doo No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End see page 180 Pin Cyl. x (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) SKI-DOO (ROTAX ENGINE) 809 Engine Type (L-Ring version) 3 70.5 796 Std. CALL $144.48 2776LK S511 CW18 Formula Mach Z 1997-98 x Grand Touring SE 1999-01 68 Mach Z 1999-01 Mach ZLT 1997-98 Mach Z Tech Plus 2001-03 Mach Z Sport 2002 Bearing: Gasket: Con. Rod: Sleeve: B1003 W5547 See listing 6060FA Bearing: Gasket: Con. Rod: Sleeve: B1003 W5547 see listing 6060FB • Rave Valve • Pro-Lite • Nikasil Bore • Liquid Cooled OVERBORE to 889cc for: 3 70.5 889 4.00 CALL $157.26 2933TD S459 CW18 809 Engine Type x Formula Mach Z 1997-98 68 Grand Touring SE 1999-01 Mach Z 1999-01 Mach ZLT 1997-98 Mach Z Tech Plus 2001-03 Kit Part # Bore Size Displ. Mach Z Sport 2002 CALL 74.5mm/+4mm 889cc Kit Price (H) $541.37 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Rave Valve • Pro-Lite • Nikasil Bore • Cylinder sleeving required • Cylinder head machining required 793 EngineType 2 82 800 Std. CALL $176.89 3228KD S650 CW20 Bearing: B1031 MXZ 800 2000-03 x 809 0.50 CALL $176.89 3248KD Gasket: W5940 MZX Adrenaline 800 2001, 2003-07 75.7 819 1.00 CALL $176.89 3268KD MXZ X 800 2001-07 Summit 800 Series 2001-05 Summit X Series 2001-0 Summit High Mark 2002-04 Summit 800 HO 2003-05 Summit 800 HO Adrenaline 2006 Summit X 800 HO 2003 Kit Part # Bore Size Displ. Kit Price (H) GSX Limited 800 2004-06 CALL 82mm/Std. 800cc $424.11 GTX Limiited 2006 CALL 82.5mm/+0.5mm 809cc $424.11 Grand Touring SE 800 2003 CALL 83mm/+1.0mm 819cc $424.11 Legend SE 800 SDI 2003 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Legend GT SE 2004 MXZ Renegade 2003-07 MXZ Renegade X 2005-06 MXZ REV, RER 2003 • Pro-Lite • Nikasil Bore 1000 2-Tec SDI Engine Type 2 88 997 Std. CALL $197.23 3464KD S678 CW24 Bearing: Mach Z Adrenaline 2005-08 x Gasket: Summit Highmark Series 2005-08 82 Summit Highmark X 2005-08 174 Kit Part # CALL Bore Size 88mm/Std. Displ. 997cc NA TBA Kit Price (H) $566.33 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Yamaha No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End see page 180 Pin Cyl. x (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) YAMAHA CALL CALL CALL CALL $102.15 $102.15 $112.36 $119.22 2677CS S511 CW18 2697CS 2717CS 2736CS Bearing: B1003 SS440 1980-85 2 66 437 Std. CALL x 0.50 CALL • Cast Iron Bore 64 1.00 CALL 1.50 CALL $114.55 $114.55 $126.00 $133.70 2598CD S477 CW18 2618CD 2638CD 2658CD Bearing: Gasket: Con. Rod: Sleeve: B1003 W5302 NA 6062FA Exciter 440 1975-81 2 68 433 x • Cast Iron Bore 59.6 Std. 0.50 1.00 1.50 Kit Part # Bore Size Displ. Kit Price (H) CALL 66mm/Std. 437cc $267.74 CALL 66.5mm/+0.5mm 443cc $267.74 CALL 67mm/+1mm 451cc $290.65 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets SRX440, SSR440 1978-80 L/C 2 68.5 439 Std. CALL $102.15 2697CSM S423 CW20 x 0.50 CALL $102.15 2717CS • Chrome bore (Will not fit 1981 model) 59.6 1.00 CALL $89.95 2736CS • Sleeving or replating required for oversizes Phazer 1984-98 2 72 485 XL-V 1991-93 x Mountain Lite 1997-99 59.6 Phazer Deluxe thru 1990 Phazer II 1990-94 PZ480H 1990-94 Kit Part # Venture 1991-98 CALL Phazer II LE, ST • Fan Cooled • Pro-Lite • Cast Iron Bore Std. 0.25 0.50 1.00 1.50 CALL CALL CALL CALL CALL $126.27 $126.27 $126.27 $138.90 $138.90 2835CD S257 CW18 2844CD 2854CD 2874CD 2894CD Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm 73.5mm/+1.5mm CALL CALL CALL NA NA NA 6005FA Bearing: Gasket: Con. Rod: Sleeve: B1003 W5106 NA 6017FA Displ. 485cc 491cc 499cc 508cc Kit Price (H) $291.18 $291.18 $316.45 $316.45 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets 500 Std. CALL $137.68 7700XU Phazer 500 1999-01 2 72 485 Phazer 500 Deluxe 2001 x Venture XL Touring 1999-00 59.6 Phazer Mountain Lite 2000-01 • Fan Cooled Kit Part # • Pro-Lite CALL • Cast Iron Bore Std. 0.25 0.50 1.00 1.50 CALL CALL CALL CALL CALL $126.27 $126.27 $126.27 $138.90 $138.90 2835CD S257 CW18 2844CD 2854CD 2874CD 2894CD GT 2008-09 2 MTX 2008-09 Phazer 2008-09 RTX 2008-09 Venture Lite 2008-09 Bearing: Gasket: Con. Rod: Sleeve: 77 x 53.6 S688 CW17 LC • NB (12.5:1 Compression) Bore Size 72mm/Std. 72.5mm/+0.5mm 73mm/+1mm Bearing: Gasket: Con. Rod: Sleeve: Displ. 485cc 491cc 499cc B1003 W5723 NA 6063FA Kit Price (H) $329.86 $329.86 $355.13 CALL CALL Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets V-Max 500 LE, DX, ST, SX 1994-01 2 68 493 Std. CALL $133.96 2677CD S423 CW20 Bearing: XT, XCT 1998 x Gasket: Venture 500 1999-01 68 SX 500 R 2000-01 • Pro-Lite • Nikasil Bore Kit Part # CALL Bore Size 68mm/Std. Displ. 493cc B1031 W5409 Kit Price (H) $332.36 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets V-Max 540 LC 1983-89 2 73 535 x • Pro-Lite 64 • Chrome bore • Sleeving or replating required for oversizes Std. 0.50 1.00 1.50 CALL CALL CALL CALL $131.45 $131.45 $131.45 $144.58 www.recreationsupply.ca 2874CDM S512 CW20 2894CD 2913CD 2933TD Bearing: Gasket: Con. Rod: Sleeve: B1023 NA NA 6006FA 175 Snowmobile Pistons & Kits for Yamaha No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Pin Clips see page 180 Model Stroke Part No. (H) $19.77 $2.34 (mm) (I) (I) YAMAHA SRV540 1980-91 2 73 535 XL-V 1986-90 x VK540 1988-05 64 • Pro-Lite • Cast Iron Bore Std. 0.25 0.50 1.00 1.50 Kit Part # CALL CALL CALL CALL CALL CALL CALL CALL CALL $120.51 $120.51 $120.51 $132.59 $132.59 Bore Size 73mm/Std. 73.5mm/+0.5mm 74mm/+1mm 74.5mm/+1.5mm 2874CD S512 CW20 Bearing: 2884CD Gasket: 2894CD Con. Rod: 2913CD Sleeve: 2933TD Displ. 535cc 543cc 551cc 557cc B1023 W5108 NA See listing Kit Price (H) $295.84 $295.84 $319.99 $319.99 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets EX570 Exciter LC 1987-90 2 73 569 Exciter Deluxe 1989-90 x • Pro-Lite 68 • Cast Iron Bore Std. 0.50 1.00 1.50 CALL CALL CALL CALL $122.59 $122.59 $134.85 $134.85 2874CD S423 CW20 2894CD 2913CD 2933TD Bearing: Gasket: B1023 W5109 Sleeve: See listing Kit Part # Bore Size Displ. Kit Price (H) Exciter II 1991-93 CALL 73mm/Std. 569cc $298.58 • Pro-Lite CALL 73.5mm/+0.50mm 577cc $298.58 • Nikasil Bore CALL 74mm/+1mm 584cc $323.10 • Sleeving or replating required for oversizes CALL 74.5mm/+1.5mm 592cc $323.10 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets V-Max 600 LE, DX, ST, XT, XTC, SX 1994-99 2 74.8 598 Std. CALL $127.38 2945TDW S423 CW20 Bearing: B1023 Venture 600 1998 x 0.50 CALL $127.38 2963TD Gasket: W5551 Mountain Max 600 1998-99 68 • Liquid Cooled Kit Part # Bore Size Displ. Kit Price (H) • Pro-Lite CALL 74.8mm/Std. 598cc $319.16 • Nikasil Bore CALL 75.30mm/+0.5mm 603cc $319.16 • Sleeving or replating required for oversizes Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Venture 600 1999-06 3 65 593 Std. CALL $126.96 6500KE S423 CW20 Bearing: V-Max 600 SX 2000 x Gasket: V-Max 600 Series 1999-02 59 Mountain Max 600 2000-02 SX 600 R 2000-02 Kit Part # Bore Size Displ. SX Venom Series 2004-06 • Pro-Lite • Nikasil Bore CALL 65mm/Std. 593cc NA W6205 Kit Price (H) $458.21 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets V-Max 700 1997-02 3 70.5 698 Std. CALL $127.38 2776CD S423 CW20 Bearing: B1039 V-Max 700 SX 1997-99 x Gasket: W5548 Venture 700 1998-03 59.6 Con. Rod: NA Mountain Max 700 1998-04 Sleeve: 6097FA V-Max 700 Deluxe 1999-01 V-Max XTC, DX 1998 Kit Part # Bore Size Displ. Kit Price (H) SX 700 R 2000-01 CALL 70.5mm/Std. 698cc $459.47 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Pro-Lite • Nikasil Bore SRX 700 Series 1998-02 3 69 696 Std. CALL $131.66 2717CD S423 CW20 Mountain 700 1998 x 4.00 CALL $144.82 2874CD 62 • Pro-Lite • Nikasil Bore 176 Kit Part # CALL CALL Bore Size 69mm/Std. 73mm/+4.0mm Bearing: Gasket: Con. Rod: Sleeve: B1039 W5604 NA FL1239 Displ. Kit Price (H) 696cc $458.13 778cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca Snowmobile Pistons & Kits for Yamaha No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End see page 180 Pin Cyl. x (mm) Piston Piston Clips Model Stroke Part No. $19.77 $2.34 (mm) (H) (I) (I) YAMAHA SX Viper Series 2002-05 3 69 696 Std. CALL $131.66 2717CD S423 CW20 Bearing: SX Viper Mountain Series 2003-06 x 0.50 CALL $139.71 2736CD Gasket: Venture 700 2004 62 • Pro-Lite • Nikasil Bore Kit Part # CALL CALL Bore Size 69mm/Std. 69.5mm/+0.5mm Displ. 696cc 706cc 13:1 Compression • Nikasil Bore Kit Price (H) $501.98 $501.98 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets RX1 2003-05 4 74 998 Std. CALL $194.48 2913XA S532 CW17 Bearing: RX1 ER 2003-05 x Gasket: RX Warrior 2004-05 58 RX1 Mountain 2003-05 Apex Series 2006-07 Kit Part # Bore Size Displ. Attack Series 2006-07 B1039 W6097 CALL 74mm/Std. 998cc NA W6112 Kit Price (H) $753.25 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets RX1 2003-05 4 74 998 1.00 CALL $199.61 2953XG S532 CW17 Bearing: NA RX1 ER 2003-05 x Gasket: W6112 RX Warrior 2004-05 58 RX1 Mountain 2003-05 Apex Series 2006-07 Kit Part # Bore Size Displ. Kit Price (H) Attack Series 2006-07 CALL 75mm/+1mm 1025cc $806.47 12:1 Compression (Overbore to 1025cc) Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets • Nikasil Bore • Cylinder boring and replating required RX1 2003-05 4 74 998 Std. CALL $137.68 2913XA S532 CW17 Bearing: NA RX1 ER 2003-05 x Gasket: W6112 RX Warrior 2004-05 58 RX1 Mountain 2003-05 Apex Series 2006-07 Kit Part # Bore Size Displ. Kit Price (H) Attack Series 2006-07 CALL 74mm/+1mm 998cc $637.58 10:1 Compression Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets (Turbo/supercharge applications) • Nikasil Bore RX1 2003-05 4 74 998 1.00 CALL $137.68 2953XG S532 CW17 Bearing: RX1 ER 2003-05 x Gasket: RX Warrior 2004-05 58 RX1 Mountain 2003-05 Apex Series 2006-07 Attack Series 2006-07 10:1 Compression (Overbore to 1025cc) (Turbo/supercharge applications) • Nikasil Bore • Cylinder boring and replating required NA W6112 Nytro/Nytro ER 2006 3 79 973 Std. CALL $166.60 3110XG S622 CW19 Bearing: RS Rage 2005-07 x Gasket: RS Vector Series 2005-08 66.2 1049 3.00 CALL $183.26 3228XG RS Venture 2005-08 Vector Mountain Series 2005-07 Kit Part # Bore Size Displ. VK Pro 2007-08 - 9.5:1 Turbo • Resleeving or replating required for oversize CALL CALL 79mm/Std. 82mm/+3.00mm 973cc 1049cc Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets Nytro Series 2006 3 79 973 Std. CALL $137.68 3110XG S597 CW19 Bearing: RS Rage 2005-07 x Gasket: RS Vector Series 2005-08 66.2 1049 3.00 CALL $151.45 3228XG RS Venture 2005-08 Vector Mountain Series 2005-07 Kit Part # Bore Size Displ. VK Pro 2007-08 12.5:1 Compression • Resleeving or replating required for oversize Kit Price (H) $562.94 $612.91 CALL CALL 79mm/Std. 82mm/+3.00mm 973cc 1049cc - Kit Price (H) $476.18 $517.49 Kit Includes: Matched & balanced forged pistons, rings, taper wall piston pins, retainer clips & top end gaskets www.recreationsupply.ca 177 Snowmobile Pistons & Kits Kawasaki/Moto-Ski No. Std. Displ. Bore Price Repl. Repl. Repl. Optional Accessories of Bore (cc) Size Wiseco Per Ring Set Piston Retainer Bearings & Gaskets are all Top End Cyl. x (mm) Piston Piston Clips see page 180 Pin Model Stroke Part No. (H) $19.77 $2.34 (mm) (I) (i) KAWASAKI/JOHN DEERE (KAWASAKI ENGINE) Kawasaki: 2 68 436 Intriguer 440 1978 x Intruder 440 60 Invader 440 Drifter 440 1978-80 (Will no fit LTD440) Std. 0.25 0.50 1.00 1.50 CALL CALL CALL CALL CALL $112.84 $119.75 $112.84 $112.84 $124.13 2677CDM S259 CW16 Bearing: 2687CD Gasket: 2697CD 2717CD 2736CD B1021 Kaw. LC Models: W5311 Kawasaki: 2 68 436 Std. CALL $118.21 2677CDM S259 CW16 Bearing: TA440B-202 x Gasket: TA440A, C 60 440 Intruder 1981 440 Invader 1981-82 440 Drifter 1979-82 (Will no fit LTD440) B1021 Kaw. LC Models: W5311 John Deere: TA440 Trail Fire 1978-79 • Includes piston pin • Chrome bore • Sleeving or replating required for oversizes John Deere: TC440A, B-C202 Liquifire 1979-82 Sportfire 1979-82 Trailfire 1981-82 (Chrome Bore) MOTO-SKI (ROTAX ENGINE) Mirage I 1980-82 1 72 269 x • Pro-Lite 66 • Cast Iron Bore Std. 0.50 1.00 1.50 CALL CALL CALL CALL $147.51 $147.51 $162.25 $162.25 2835LK S513 CW18 Bearing: 2854LK Gasket: 2874LK 2894LK B1003 NA Mirage II 1980-83 2 62 368 Mirage II E 1980-82 x Mirage Special 1980-82 61 • Cast Iron Bore Std. 0.25 0.50 1.00 CALL CALL CALL CALL $122.32 $122.32 $122.32 $134.54 2441CD S477 CW18 Bearing: 2451CD Gasket: 2461CD 2480CD B1003 NA Ultra Sonic 1980-82, 1984 2 67.5 436 Std. CALL $131.05 2658LT S513 CW18 Bearing: x 0.50 CALL $131.05 2677LT Gasket: • Pro-Lite 61 • Cast Iron Bore B1003 NA Grand Prix Special 1979-81 2 72 503 Sonic 1982 x Future 500 & 500E 1980-82 61 • Pro-Lite • Cast Iron Bore 178 Std. 0.50 1.00 1.50 CALL CALL CALL CALL $147.51 $147.51 $162.25 $162.25 www.recreationsupply.ca 2835LK S513 CW18 Bearing: 2854LK Gasket: 2874LK 2894LK B1003 NA Wiseco Cylinder Preparation Cast Iron Sleeved Cylinders: To ensure proper ring seal, it is necessary to hone the cylinder with a rigid or brush hone. DO NOT install a new piston without honing the cylinder to break the glaze. Finish hone with a 280 grit. Cross hatch is necessary to ensure proper ring seal and adequate lubrication. If the cylinder is in good condition, simply honing the cylinder may be enough to restore the bore to an acceptable condition. However in some cases, boring may be necessary to insure the cylinder bore is within the tolerances outlined in the service manual. Plated Cylinders: (Includes nickel ceramic coatings (Nikasil), chrome, Electrofusion, and boron composite.) If the plated cylinder is in good condition, honing may not be necessary. If deglazing is necessary, DO NOT use a ball hone. Use a rigid or brush type diamond hone. Plated cylinders cannot be bored oversize without replating or resleeving. Any time a cylinder is bored or honed, all ports must be chamfered. The top of the cylinder should be deburred, and the bottom should be generously chamfered for ease of piston and ring installation. When boring a cylinder with an exhaust bridge, the face of the bridge must be relieved .002"-.004" to allow for bridge expansion. Without proper bridge clearance, engine damage could occur. IMPORTANT: After honing, the cylinder must be washed with warm soapy water to remove all honing grit. Be sure to wash away any grit that may have traveled into the transfer and exhaust ports during honing. The cylinder is NOT clean until you can wipe the cylinder wall with a clean, oil dampened cloth and it does not pick up any honing grit. Lightly oil the cylinder bore to prevent oxidation and assist with piston installation. Exhaust Power Valves (2-Stroke engines) When boring cylinders with exhaust power valves the exhaust power valve must be inspected to ensure it does not extend into the cylinder. The exhaust power valve must have approximately .015” clearance from the cylinder bore. Without proper clearance, the exhaust power valve could contact the piston and engine damage could occur. If machining the exhaust power valve is necessary, remove metal only in the area that extends into the cylinder bore. (See illustration) Remove this material MM to INCHES CONVERSION TABLE MM............INCHES 39.0.............1.5354 39.5.............1.5551 40.0.............1.5748 40.5.............1.5945 41.0.............1.6142 41.5.............1.6339 42.0.............1.6535 42.5.............1.6732 43.0.............1.6929 43.5.............1.7126 44.0.............1.7323 44.5.............1.7520 45.0.............1.7717 45.5.............1.7913 46.0.............1.8110 46.5.............1.8307 47.0.............1.8504 47.5.............1.8701 48.0.............1.8898 48.5.............1.9094 49.0.............1.9291 MM............INCHES 49.5.............1.9488 50.0.............1.9685 50.5.............1.9882 51.0.............2.0079 51.5.............2.0276 52.0.............2.0472 52.5.............2.0669 53.0.............2.0866 53.5.............2.1063 54.0.............2.1260 54.5.............2.1457 55.0.............2.1654 55.5.............2.1850 56.0.............2.2047 56.5.............2.2244 57.0.............2.2441 57.5.............2.2638 58.0.............2.2835 58.5.............2.3031 59.0.............2.3228 59.5.............2.3425 MM............INCHES 60.0.............2.3622 60.5.............2.3819 61.0.............2.4016 61.5.............2.4213 62.0.............2.4409 62.5.............2.4606 63.0.............2.4803 63.5.............2.5000 64.0.............2.5197 64.5.............2.5394 65.0.............2.5591 65.5.............2.5787 66.0.............2.5984 66.4.............2.6142 66.5.............2.6181 67.0.............2.6378 67.4.............2.6535 67.5.............2.6575 68.0.............2.6772 68.5.............2.6969 69.0.............2.7165 MM............INCHES 69.5.............2.7362 70.0.............2.7559 70.5.............2.7756 71.0.............2.7953 71.5.............2.8150 72.0.............2.8346 72.5.............2.8543 73.0.............2.8740 73.5.............2.8937 74.0.............2.9134 74.5.............2.9331 75.0.............2.9528 75.5.............2.9724 76.0.............2.9921 76.5.............3.0118 77.0.............3.0315 77.5.............3.0512 78.0.............3.0709 78.5.............3.0906 79.0.............3.1102 79.5.............3.1299 MM............INCHES 80.0.............3.1496 80.5.............3.1693 81.0.............3.1890 81.5.............3.2087 82.0.............3.2283 82.5.............3.2480 83.0.............3.2677 83.5.............3.2874 84.0.............3.3071 84.5.............3.3268 85.0.............3.3465 85.5.............3.3661 86.0.............3.3858 86.5.............3.4055 87.0.............3.4252 87.5.............3.4449 88.0.............3.4646 88.5.............3.4843 89.0.............3.5039 89.5.............3.5236 90.0.............3.5433 MM............INCHES 90.5.............3.5630 91.0.............3.5827 91.5.............3.6024 92.0.............3.6220 92.5.............3.6417 93.0.............3.6614 93.5.............3.6811 94.0.............3.7008 94.5.............3.7205 95.0.............3.7402 95.5.............3.7598 96.0.............3.7795 96.5.............3.7992 97.0.............3.8189 97.5.............3.8386 98.0.............3.8583 98.5.............3.8780 99.0.............3.8976 99.5.............3.9173 100.0............3.9370 100.5............3.9567 MM............INCHES 101.0............3.9764 101.5............3.9961 102.0............4.0157 102.4............4.0299 102.5............4.0354 103.0............4.0551 103.5............4.0748 104.0............4.0945 104.5............4.1142 105.0............4.1339 105.5............4.1535 106.0............4.1732 106.5............4.1929 107.0............4.2126 107.5............4.2323 108.0............4.2520 108.5............4.2717 109.0............4.2913 109.5............4.3110 110.0............4.3307 Wiseco now stocks Nylon, Soft Hone Brushes Description mm Description inches Part number 1.77” - 2.24” 2.24” - 2.76” 2.48” - 2.99” 2.99” - 3.50” 3.50” - 4.02” W6075 W6076 W6077 W6078 W6079 Brush Overall Length Length NYLON, SOFT HONE BRUSHES 45-57mm 57-70mm 63-76mm 76-89mm 89-102mm 2” 3” 4” 4” 4” 10” 10” 14” 14” 14” www.recreationsupply.ca Price (G) $64.22 $64.22 $84.15 $84.15 $94.68 179 Wiseco Accessories All Wiseco rings can be used in cast iron, nickel ceramic platings (Nikasil), boron composite, and Electrofusion bores. CAUTION: Unless otherwise noted, Wiseco rings can NOT be used in chrome plated bores. Engine damage will occur. *CSM, CDM, KAM, & KDM rings are designed to be used in chrome bores. 2-Stroke Rings Type Price (I) Thickness Bore Range Description CS $20.21 1mm (.039”) 39 - 74mm (1.535 - 2.913”) Alloy steel, ferrox coated, chrome faced, internally notched. CST $20.21 1mm (.039”) 54mm (2.126”) Alloy steel, ferrox coated, chrome faced, internally notched. CD $40.43 1mm (.039”) 1mm (.039”) 39 - 74mm (1.535 - 2.913”) Alloy steel, ferrox coated, chrome faced, internally notched. CDW $40.43 1mm (.039”) 1mm (.039”) 73.4mm (2.890”) Alloy steel, ferrox coated, chrome faced, internally notched. (for 2.04mm knock pin) *CSM $20.21 1mm (.039”) *CDM $40.43 1mm (.039”) TC NLA 1.2mm (.047”) TD NLA 1.2mm (.047”) TDW $41.85 LT 39 - 73mm (1.535 - 2.874”) Nodular iron, phosphate coated, internally notched. (for use in Chrome Bores) 39-73mm (1.535-2.874”) Nodular iron, phosphate coated, internally notched. (for use in Chrome Bores) 74.5 - 91mm (2.933 - 3.583”) Alloy steel, ferrox coated, chrome faced, internally notched. 1.2mm (.047”) 74.5 - 91mm (2.933 - 3.583”) Alloy steel, ferrox coated, chrome faced, internally notched. 1.2mm (.047”) 1.2mm (.047”) 74.8 - 81mm (2.945 - 3.189”) Alloy steel, ferrox coated, chrome faced, internally notched. (for 2.04mm knock pin) $44.76 2.0mm (.079”) 2.0mm (.079”) 67.5 - 80mm (2.658 - 3.150”) Nodular iron, phosphate coated, chrome faced, internally notched, half-keystone, Dykes “L”. LK $53.43 2.0mm (.079”) 67.5 - 82.5mm (2.658 - 3.248”) LK ring package contains (1) LT ring, and (1) flat ring. The flat ring will be a CS style for bore sizes up to 74mm; TC style for 74.25mm bores and larger. LF NLA 2.0mm (.079”) 81 - 84mm (3.189 - 3.307”) The LF ring package contains (1) Nodular iron, phosphate coated, chrome faced, internally notched, half-keystone, Dykes “L” top ring, and (1) cast iron, phosphate coated, internally notched second ring. KA $17.45 1.5mm (.059”) 55.57 - 98.9mm (2.188 - 3.894”) Alloy steel, ferrox coated, chrome faced, side notched, half-keystone. KD $36.09 1.5mm (.059”) 1.5mm (.059”) 55.57 - 98.9mm (2.188 - 3.894”) Alloy steel, ferrox coated, chrome faced, side notched, half-keystone. *KDM NLA 1.5mm (.059”) 1.5mm (.059”) 80.5 - 91mm (3.169 - 3.584”) Nodular iron, phosphate coated, side notched, half-keystone (for use in Chrome Bores) KB NLA 1.2mm (.047”) 1.2mm (.047”) 82 - 85.25mm (3.228 - 3.356”) Alloy steel, ferrox coated, chrome faced, side notched, half-keystone. KE $24.52 1.2mm (.047”) 65 - 66.5mm (2.559 - 2.618”) Alloy steel, ferrox coated, chrome faced, back notched, half-keystone. KF NLA 65 - 66.5mm (2.559 - 2.618”) Alloy steel, ferrox coated, chrome faced, back notched, half-keystone. 1.2mm (.047”) 1mm (.039”) 2.0mm (.079”) 1.2mm (.047”) 4-Stroke Rings Type 180 Price (H) Bore Range Top Ring Second Ring Oil Ring XA $41.50 59 - 74.5mm (2.323-2.933”) chrome faced. 0.8mm (.031”) Alloy steel, ferrox coated, taper faced. 0.8mm (.031”) Cast iron, phosphate coated, chrome faced rails. 1.5mm (.059”) 3 piece oil assembly: Stainless steel flex-vent spacer, XG $38.73 75 -83mm (2.953-3.268”) chrome faced. 1.0mm (.039”) Alloy steel, ferrox coated, taper faced. 1.0mm (.039”) Cast iron, phosphate coated, chrome faced rails. 2mm (.079”) 3 piece oil assembly: Stainless steel flex-vent spacer, www.recreationsupply.ca Wiseco Gasket Kits for Arctic Cat • Head Cover O-Rings NOT included in Kit 440 1971-75 2 440 FC T1A, T1B, T1C, T1D440S1, Pantera and Cheetah 1972-75, EXT 1971-72, 2 Lynx II, Panther 1971-75, Puma 1971-73 ARCTIC CAT (Spirit, Suzuki Engine) Panther 1980-81, 1984-85, 1989-93, Panther Deluxe 1991-96, Panther 440 ‘97-01 2 Jag Long Track 1981, Jag 1981, 1985-88, Super Jag 1987-92, Jag AFS 1989-93 Jag/Jag Deluxe 1992-96, Jag Special 1992, Jag Z 1993-94, Cheetah 440 1994 Jag 440 / Jag 440 Deluxe 1998-99, Bearcat 440 1996-00, Z440 1995-01 Pantera LC 1985-89, El Tigre LC 1978-79, ‘87-88, El Tigre 6000 LC ‘76-81, ‘84-85 2 Prowler 1990-94, Prowler Mt. Cat 1991-92, Cougar ‘91-94, Cougar Mt. Cat ‘93-94 2 Cheetah Tour 1991-92, Cheetah 1993, Pantera 1990-92 Panther LC / Jag LC 1996, ZL440 1997-01 El Tigre 5000 / Pantera 1976-81, Cheetah 1976-78, 1986-87, Cheetah Tour ‘88-90 2 Panther 1976-79, 1986-88, Cougar 1985-90, Cougar Mt. Cat 1990 ZR440 1996-98 2 ZR440 Sno Pro 2003-04 2 ZR500 1998-00, ZR500 EFI 2000-02, ZL500 1998-01, Powder Special EFI ‘99-00 2 El Tigre 6000 1986-90, Cheetah LC 1986-88, El Tigre EXT 1989-90, 2 El Tigre EXT Special 1990, El Tigre EXT Mt. Cat 1990-91 EXT Special 1991-92, EXT / EXT Mt. Cat 1992, EXT550 1993-94, EXT EFI ‘92-93 2 Pantera 1993-94, EXT EFI Mt. Cat 1993, Cheetah 550 1994, Prowler 2-Up 1995 Cougar/Cougar Mt. Cat 1995-98, Bear Cat 550 ‘95-96, Bearcat Widetrack ‘96-01 Panther 550 1997-00, ZL 550 ESR 2000-03 EXT580Z 1993, ZR580 1993-96, ZR580 EFI 1995-97, EXT 580 Mt. Cat 1993-96 2 EXT580 1994-96, EXT 580 EFI 1994-96, 98, EXT580 EFI Deluxe 1996-98, EXT Powder Special 1995-96, Powder Special EFI 1997, Pantera 1995-98 Pantera 580 1999-02, ZL580 EFI, ESR ZR600, ZR600 EFI 1998-03, 600 EFI LE 2001-03, Powder Special, Powder 2 Special EFI 1998-00, Mountain Cat 600 EFI 2001-03, Pantera 600 EFI 2002-03 ZL600, ZL600 EFI 1999-00 also Overbore to 83mm (680cc) ZRT600 1995-01, Powder Extreme 1997-99, EXT600 ‘97-98, EXT600 Touring ‘98 3 Triple Touring 600 1999-00 Wild Cat 650 1988-90, 2 Wild Cat 700 1991-96, Wild Cat 700 EFI 1992-96, Wild Cat Mt. Cat 700 1991-96, Wild Cat Mt. Cat EFI 1991-96, ZR700 1994-96, 1999-00, Wild Cat Touring ‘95-96, Powder Special 700 1999-00, ZL700 2000 also Overbore to 86mm ZRT 800 1995-02, Pantera 800 1998-99 also Overbore to 80.5mm (992cc) 3 Mountain Cat 800 2001-04, ZL800 EFI 2002-04 2 ZR800 2001-03, ZR800 EFI 2001-03 Thunder Cat 900 1993-94, Mountain Cat 900 1995-97 3 also Overbore to 80.5mm (992cc) Thunder Cat 1000cc 1998-03, Mountain Cat 1000cc 1998-03, Pantera 1000cc 2001-03 F5 Firecat 2003-07 2 F7 Firecat 2003-06 2 440cc 440cc W5311 W5071 $54.82 $38.64 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 431cc W5089 $38.64 ✔ ✔ 440cc 436cc W5092 W5213 $54.82 $53.34 ✔ ✔ ✔ ✔ 499cc W5090 $38.64 ✔ ✔ ✔ ✔ 438cc 438cc 497cc 529cc W5596 W6199 W5597 W5037 $77.32 $91.36 $77.32 $54.82 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 550cc W5245 $77.32 581cc W5334 599cc ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ $77.32 ✔ ✔ ✔ ✔ W5961 $77.32 ✔ ✔ 594cc W5498 $94.11 ✔ ✔ 650cc 699cc 790cc W5088 $81.21 794cc 785-883 W5447 W5941 895cc 900cc 992cc 1000cc 1098cc 499cc 698cc www.recreationsupply.ca ✔ ✔ ✔ ✔ Water Man. Exh. Base Gasket Components Price (G) Intake Reed No of Displ. Part No. Cyl. Head ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ $94.11 $81.21 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ W5335 $94.11 ✔ ✔ ✔ ✔ W6200 W6161 $81.21 $81.21 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 181 Wiseco Gasket Kits for Polaris • Head Cover O-Rings NOT included in Kit 400 Indy 1984-91, Indy 400 Classic 1988-90 LC 440 Cutlass SSE 1981-82, 440 Indy Trail 1983-86, Long Track 1983-90, SS440 1983-86, TX-C 1981-82, Indy Sport 1991-98, 440 Indy Sport CT 1991-97 Indy Super Sport 1994-96, Indy XCF 1997-98, Indy Transport 1996-99 Indy XC 440 1991, Indy 440 SKS 1993-95, Indy 440 XCR 1992-94, Indy 440 1992-96, Indy 440 1997-98 XCR 440 SP 1994-96, Indy XCR 440 1995-96, 440 XC 1997 XCR440 LC 1997-99 488 Indy Trail 1986-99 FC, 488 Deluxe, ES, SKS 1988-90 Trail RMK 1998, Trail 1998, Indy Super Sport 1997-98, Indy Trail Touring 1995-99 500 Indy, Indy Classic 1989-03, 500 EFI 1992-97 500 Indy RMK 1996-99, 500 SKS 1991-97 Indy Wide Track LX 1990-00, 500 Indy Classic Tour 2000-03 XC500 Indy 1999-02, XC500 SP 1999-02, Indy 500 RMK 2001 Indy Super Sport 1999-03, Indy Trail RMK/SKS 1999-02, Indy Sport Touring 2001-03, Indy Trail Touring 2001 XCR600 SP 1996, XCR 600 SE 1997, XCR 600 1997-98 580 Indy XLT 1993-94, XLT SKS/Special 1993-94 600 XC 1998-99, 600 RMX 1998-01, 600 XC Deluxe 45th 2000, 600 XC SP 1999, Indy 600 Classic 2001 Indy Triumph 2000, XCR600 1995-96, XLT LTD 1997-98, XLT600, SKS/RMK 1995-97, XLT Touring, XLT SP 1995-99, XLT Classic 1998-99 600 Indy LC 1983-87 Overbore to 66mm 600 Indy LC 1983-87 Overbore to 68.25mm 650 Indy LC, RXL 1988-90 67.75mm thru 69.25mm 650 Indy LC, RXL 1988-90 Overbore to 72mm 650, 650 EFI 1991-98, 650 RXL 1991-97 650, 650 EFI 1991-98, 650 RXL 1991-97 Ultra RMK/SKS 1996, Ultra SP ‘96-97, Ultra SPX ‘97, Ultra/Ultra Touring ‘97-98 700 XC Deluxe 45th 2000, Indy 700 SKS 1997, 1999-03, Indy Classic 700 ‘01-04, XC700 1998-99, 700 RMK 1997-05, 700 XC, SP 1999-05 also Overbore to 84mm 700 XCR LC 1999 Indy Storm 800 1994-98 Indy Storm 800 1994-98, 75mm 800 XCR 1999-03 800 RMK 2000 & 2002-05, 800 XC, SP 2001-05 440 Pro X LC 2003-04, Liberty Motor, 66mm Exh. Water Man. Intake Reed Gasket Components Price (G) Base No of Displ. Part No. Cyl. Head 2 2 400cc 440cc W5096 W5101 $54.82 $44.51 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2 440cc W5412 $65.73 ✔ ✔ ✔ ✔ 2 2 2 440cc 438cc 488cc W5554 W5709 W5099 $65.73 $74.74 $42.75 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2 500cc W5153 $54.82 ✔ ✔ 2 2 500cc 544cc W5711 W5946 $74.74 $64.43 ✔ ✔ ✔ ✔ 3 3 2 598cc 579cc 600cc W5499 • W5336 W5600 $74.15 $51.91 $77.32 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3 597cc • W5444 $74.15 ✔ ✔ ✔ ✔ 3 3 3 3 3 3 3 2 597-615cc 623-658cc 649-678cc 693-735cc 649-678cc 693-732cc 680cc 700-754cc W5260 W5100 W5102 W5251 W5306 W5313 W5505 W5550 $74.15 $82.05 $74.15 $74.15 $74.15 $74.15 $92.79 $75.63 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3 3 3 3 2 2 700cc 794cc 861cc 800cc 794cc 438cc W5714 W5408 W5452 W5728 • W5943 W6202 $74.74 $69.59 $69.59 $74.74 $77.75 $83.11 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Piston Pins PISTON PINS (unchromed) Part # Dia. Length S255..........16mm........1.9685" S256..........16mm........2.0472" S257..........18mm........2.2047" S258..........16mm........1.7519" S259..........16mm........2.2992" S270..........16mm........1.850" S271..........16mm........2.244" S272..........18mm........2.3031" S277..........18mm........2.5787" S278..........18mm........2.4724" S280..........18mm........2.165" 182 Part # $19.77 (G) Dia. Length S288..........14mm........1.6141" S330..........17mm........2.429" S343..........18mm........2.3622" S376..........19mm........2.500" S390..........21mm........3.000" S391..........18mm........2.244" S392..........20mm........3.0511" S394..........14mm........1.8897" S395..........14mm........1.732" S414..........20mm........3.228" S417..........22mm........2.500" Part # Dia. Length S419..........22mm........2.1259" S423..........20mm........2.185" S428..........22mm........3.228" S455..........18mm........1.693" S459..........18mm........1.850" S461..........20mm........2.559" S467..........15mm........1.614" S475..........19mm........2.303" S477..........18mm........2.0748" S478........19.9mm.......2.358" S482..........18mm........1.9488" Part # Dia. Length S484..........18mm........2.2913" S485..........14mm........1.7815" S486..........16mm........2.1752" S493..........24mm........2.992" S508..........18mm........2.1062" S511..........18mm........2.244" S512..........20mm........2.362" S513..........18mm........2.3031" S514..........16mm........1.7519" S517..........14mm........1.5098" S538..........12mm........1.5354" www.recreationsupply.ca Part # Dia. Length S539..........22mm........2.500" S540..........17mm........2.2343" S544..........20mm........2.933" S558..........15mm........1.9685" S563..........12mm........1.2205" S568..........21mm........2.618" S584..........26mm........2.677" S595..........12mm........1.417" S678..........24mm........2.992" Wiseco Gasket Kits for Ski-Doo • Head Cover O-Rings NOT included in Kit Formula MX ‘86-96, Formula MX lt ‘87-90, Safari GLX ‘90-92, Safari LC 467 ‘90-91 Safari LCE 467 1991-92, Formula E, Formula XTC, Formula XTC II 1991, Formula MX 1991, Formula MXZ 1993-94, Formula MXZA 1993 Formula MXZ 1993-94, Formula XTC R 1993 MXZ 440 LC 1995-99 MXZ 500 STD 2000-01, Grand Touring 500 2001-02, Formula Deluxe STD 2001 MXZX 500 2002, MXZ Adrenaline 2002, MXZ Trail 2002 Touring 500 LL 2000, Formula 500 Deluxe 1997-00, Summit 500 1996-99, Formula Z 500 1999, MXZ500 1998-99, GT 500 1996-98, Skandic 1997-00, Formula SLS 1996, Deluxe 500 1999-00 Everest 500, Futura 500 1980-82, Sonic 500 1982, Blizzard MX 5500 1981-82 Grand Prix Special ‘79-81, Grand Prix MX ‘81, Blizzard MX ‘84, Alpine 500 ‘83-85 Stratos E 1988, Voyageur 1989, Escapade 1987-89, Stratos 1987-88 Nordik 60 1987-91, Safari Cheyenne 1989-90, Skandic 503 1987, Safari 503, 503R ‘88-89, Alpine 503 ‘86-87, Alpine II 503 ‘88-91, Cheyenne ‘91, Alpine II ‘93, Alpine 500 ‘93, Alpine II ‘95, Skandic Wide Track ‘95, Skandic Ski Hill Special ‘95 Formula Plus 1989-91, Formula Plus LT 1989-90, Formula E, Formula XTC, Formula XTC E 1991, Formula Plus X 1991 Formula Plus 1992-93, Formula Plus E 1992-93 Formula Plus XTC 1992-93, Formula Plus II 1993, Formula Plus XTC E 1992, Formula Plus EFI 1993, Formula Grand Tour 1993, Grand Touring 583 1994-99, Grand Touring XTC 1994, MXZ 1997-98 Formula Mach I 1991-92, Formula Mach I XTC 1991-92, Summit 583 1994-96, Formula STX 1995-96, Formula STX LT 1995, Formula Z 1995-99, Formula MXZ 1998, Formula STX 1996, Grand Touring 583 1994-99, MXZ 1997-98 Formula Z 600 2000, DLX 600 Grand Touring 2000-02, Summit 600 1999-02, MXZ 600X 1999-02, MXZ Trail 2001 & 2003, MXZ Adrenaline 2001-02, MXZ 600 STD 2001, Skandic 600 WTLC 2001-03, Formula DLX/GSE/STD 2001 Formula III 600 1995-99, Formula III LT 600 1996-97 Formula Mach I 1991-92, Formula Mach I XTC ‘91-92, Formula Mach I XTC II ‘92, Formula Plus X 1993, Formula Mach IX 1991, Mach I Rave 1991-92 (617cc) Summit 1994-98 Formula Mach I 1993-95, Mach I 1996, Grand Touring SE 1994-96 Formula SS 1994, MXZ670 1996-98, Formula DEL 679 ‘99, Formula Z670 ‘98-99 MXZ 670 HO 1999, Formula Mach I XTC 1993-96, Formula Mach III 1993-94, Summit 670 1996-97 Formula Mach I 1993-95, Mach I 1996, Grand Touring SE ‘94-96, Formula SS ‘94 MXZ 670 1996-98, Formula DEL 670 1999, Formula Z 670 1998-99, Summit X 670 1998-99, MXZ670 HO 1999, Mach I Rave 1996 Overbore to 739cc Mach I 1997-00, Grand Touring SE 1997-00, Formula III 700 1998-00 Adrenaline 700 2001-03, MXZ 700 1999-02, Summit X 700 2001-03, Formula Deluxe Z 700 2000, Renegade 700 2002, Trail 700 2002, Grand Touring Sport 2002-03, Summit High Mark 2000-03 Formula Mach Z 1994-96, Formula Mach Z LT 1996 also Overbore to 74.5mm Summit 800 2000-02, MXZ Adrenaline 800 2001-03, MXZ800X 2001-02 MXZ 800 STD 2001, MXZ Renegade 2002, Grand Touring SE 800 2002-03 Mach ZLT Rave ‘97-98, Mach Z, Grand Touring SE ‘99-01, Formula Mach Z ‘97-98 Formula III 800 1999, Mach Z Tech Plus 2001-03, Mach Z Sport 2002 also Overbore to 74.5mm (889cc) Rev 600 HO 2003-07 2 463cc W3991 $51.91 ✔ ✔ ✔ 2 2 437cc 493cc W5449 W6098 $51.91 $77.32 ✔ ✔ ✔ ✔ ✔ ✔ 2 499cc • W5545 $60.52 ✔ ✔ ✔ 2 497cc W5103 $38.64 ✔ ✔ 2 521cc W5255 $51.91 ✔ ✔ ✔ 2 581cc W5312 $51.91 ✔ ✔ ✔ 2 581cc W5250 $60.79 ✔ ✔ ✔ 2 597cc • W5717 $94.63 ✔ ✔ 3 2 598cc 617cc W5502 W5248 $69.56 $51.91 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2 669cc W5338 $55.36 ✔ ✔ ✔ 2 739cc W5730 $55.09 ✔ ✔ ✔ 3 2 699cc 700cc • W5546 • W5945 $69.59 $63.85 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3 2 774-889cc 793cc W5339 W5940 $69.59 $70.34 ✔ ✔ ✔ ✔ 3 796-889cc W5547 $69.59 ✔ ✔ ✔ ✔ 2 594cc W6181 $52.83 ✔ ✔ ✔ ✔ www.recreationsupply.ca Water Man. Exh. Intake Reed Price (G) Base Gasket Components No of Displ. Part No. Cyl. Head ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 183 Wiseco Gasket Kits for Yamaha • Head Cover O-Rings NOT included in Kit 2 2 440cc 480cc W5302 W5106 $38.64 $38.64 ✔ ✔ ✔ ✔ ✔ ✔ 2 2 500cc 493cc W5723 W5409 $77.32 $64.43 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2 2 2 3 3 540cc 570cc 598cc 593cc 698cc W5108 W5109 W5551 W6205 W5548 $54.82 $53.41 $64.40 $77.32 $77.32 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3 748cc W5549 $77.32 ✔ ✔ ✔ ✔ 3 3 4 696cc 696cc 998-1025cc W5604 W6097 W6112 $63.15 $107.00 $86.85 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ SS440 D, E, F, G, H thru 1985 PZ480 Phazer 1984-98, FC Venture 1991-98, EXL-V 1991-97, RXL-V 1991-94, Mountain Lite 1997-99, Phazer II 1990-94 Phazer 500, Venture XL 1999-01, Phazer Mt. Lite 2000-01 Venture 500 1999-01, V-Max 500 LE, DX, ST 1994-01, XTC, XT 1998, SZ 500 R 2000-01 EC540, Excell, SRV 540 thru 1996, VK540 1988-03 EX570 Exciter 1987-90, Excoter II 1991-93 Venture 600 1998, V-Max 600 LE, DX, ST 1994-98, Mountain Max 600 1998-99 600 Triple 1999-05 V-Max 700 1997-02, Mountain Max 1998-03, Venture 700 1998-03, V-Max 700 SX 1997-99, SX 700 R 2000-01 V-Max 700 1997-02, Mountain Max 1998-03, Venture 700 1998-03, V-Max 700 SX 1997-99, SX 700 R 2000-01 Over bore SRX700 1998-01, Mountain 700 1998 SX700 Viper (All) RX1 2003 Exh. Price (G) Base Part No. Intake Reed Displ. ✔ ✔ ✔ ✔ Water Man. Gasket Components No of Cyl. Head ✔ ✔ Bearings TOP END BEARINGS Part # Price (G) ID × OD × Length (mm) B1000..............$18.51....................... 12 × 16 × 16 B1001..............$18.51....................... 15 × 19 × 17 B1002..............$21.17....................... 18 × 23 × 24 B1003..............$19.85....................... 18 × 22 × 22 B1004..............$22.49....................20 × 25 × 27.8 B1005..............$19.85....................... 16 × 21 × 23 B1006..............$18.51....................14 × 18 × 17.5 B1008..............$19.85....................16 × 21 × 19.5 B1012..............$18.51....................... 14 × 18 × 16 B1013..............$19.85....................... 15 × 19 × 20 B1014..............$21.17....................... 18 × 23 × 22 B1015..............$18.51....................12 × 17 × 14.2 B1016..............$19.85....................16 × 20 × 19.5 B1018..............$18.51....................... 14 × 18 × 20 B1021..............$19.85....................16 × 20 × 22.5 B1022..............$19.85....................18 × 22 × 23.6 B1023..............$21.17....................... 20 × 25 × 25 B1024..............$21.17....................... 20 × 26 × 24 B1030..............$21.17....................22 × 27 × 24.8 B1031..............$21.17....................... 20 × 25 × 23 B1036..............$21.17....................19 × 24 × 24.8 B1037..............$19.85................. 18 × 22 × 19.65 B1038..............$18.51....................15 × 20 × 17.8 B1039..............$21.17....................20 × 25 × 21.8 B1041..............$19.85....................12 × 15 × 14.5 B1042..............$19.85....................12 × 15 × 16.3 B1043..............$19.85....................12 × 16 × 14.8 B1071..............$21.17....................... 20 × 24 × 24 B1072..............$21.17....................... 20 × 24 × 23 B1074..............$21.17....................... 22 × 27 × 23 B1075..............$21.17....................... 24 × 29 × 25 184 CRANK PIN BEARINGS Part # Type I. D. O. D. $24.52 (G) Width B1045.................KU.................20..................... 26...................14 B1046.................KU.................22..................... 28...................14 B1047.................KU.................22..................... 28...................16 B1048.................KU.................22..................... 29...................17 B1049.................KU.................24..................... 31...................17 B1050.................KU.................24..................... 32...................20 B1051.................KU.................25..................... 32...................20 B1052.................KU.................32..................... 41...................18 **B1053.............KU.................34..................... 43...................20 B1057................. KT..................24.3.................. 32.3...............16 B1058................. KT..................24.6.................. 30.6...............15 B1059................. KT..................25..................... 32...................16 *B1060............... KT..................25..................... 32...................20 B1061................. KT..................26..................... 33...................18 KT= M profile KU= Flat profile * Limited to available stock ** $34.34 (G) www.recreationsupply.ca Part # Type I. D. O. D. Width B1062................. KT..................26..................... 34...................20 B1063................. KT..................28..................... 35...................16 B1064................. KT..................28..................... 35...................18 B1065................. KT..................28..................... 36...................20 B1066................. KT..................38..................... 48...................23 B1067................. KT..................24..................... 30...................15 B1068................. KT..................25..................... 34...................17.8 B1069................. KT..................30..................... 38...................18 B1070.................KU.................16..................... 22...................12 B1073................. KT..................17..................... 23...................14 B1076................. KT..................27..................... 34...................21 B1077................. KT..................32..................... 40...................20 B1078................. KT..................25..................... 32...................16 B1079................. KT..................33..................... 41...................20