0. PRESSBRAKE P1-3

Quality from the Cutting Edge of Fabrication
COMBINATION OF DIES & PUNCHES
TABLE OF CONTENTS
PUNCH HOLDERS
PUNCHES
DIES
POLYURETHANE DIES & DIE HOLDERS
STANDARD OFFSET TOOLS
HEMMING PUNCH & DIES
ASTRO ROBOTIC TOOLING
ONE TOUCH HOLDER & ACCESSORIES
PRESS BRAKE ACCESSORIES
REPLACEMENT PARTS
AIR BENDING FORCE CHART
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Features of Amada Tooling
3
4
14
34
35
36
37
38
39
42
43
1
90º BENDING
(27GA —11GA)
2
90º BENDING STRAIGHT
PUNCH (27GA —14GA)
108
109
4
16
116
147
148
STANDARD DIE HOLDER
STANDARD DIE HOLDER
90º BENDING DOOR SASH
(27GA —14GA)
High Precision – AMADA tooling is hardened and ground to give you optimal press brake
performance with all critical tolerances ground to within 0.0008" (.02 mm). Amada precision performance helps
eliminate secondary handling to correct errors while also helping to decrease bending costs. In addition, Amada
tooling is through-hardened, providing you with long lasting accuracy superior to conventional tooling.
90º BENDING
(3/8"—1/2")
6
200
201
202
Sectionalized – Amada tooling is sectionalized as follows for convenience and efficiency:
90º BENDING DOOR SASH
(27GA —14GA)
4
200
201
202
RADIUS BENDING
(18GA —16GA)
7
320
321
322
324
325
326
330
8
RADIUS BENDING URETHANE
DIE (27GA —11GA)
17 (10R)
17 (15R)
17 (17.5R)
17 (20R)
17 (25R)
17 (30R)
61 (1)
61 (2)
61 (3)
61 (4)
61 (5)
15
230
231
17 (.79R)
17 (.98R)
320
321
322
324
325
326
Standardized – Amada tooling is available in Long (32.87") and Short (16.34") lengths, providing for easy,
one-operator set-up.
90º BENDING GOOSENECK
(27GA —8GA)
45
46
47
50
51
52
121
150
123
151
124
452
125
12590 453
462
126
12690 463
127
12790
STANDARD DIE HOLDER
121
123
124
125
12590
126
12690
127
12790
121
123
124
125
12590
126
12690
127
12790
5
3
350
18
39
330
Punch (Inches): .39 + .59 + .79 + 1.57 + 1.97 + 3.94 + 3.94 + 7.87 + 11.81 = 32.87"
Die (Inches): .39 + .59 + .79 + 1.57 + 1.97 + 3.94 + 7.87 + 15.75 = 32.87"
Variety of Standardized Shapes – Amada tooling is available in a wide variety of shapes to meet almost any
forming need. You’re assured of finding the right tooling to perform your bending operation in the most precise,
efficient manner.
9
ACUTE ANGLE BENDING
(27GA —14GA)
10
ACUTE ANGLE BENDING
(14GA —10GA)
210
11
ACUTE ANGLE BENDING
(10GA —6GA)
12
NARROW BOX BENDING
210
Interchangeable – Amada tooling is designed for interchangeable use on all Amada press brakes.
215
60578
60579
337
Amada press brake dies are hardened thoroughly at 65-69 HRC. Our patented Amanit process combines optimum
surface hardness, lubricity and grinding to the highest tolerances in the industry.
342
343
340
341
STANDARD
PUNCH
STANDARD DIE HOLDER
These manufacturing processes not only ensure that the tooling provides optimum press brake performance, but
also maximizes tool durability and component accuracy far better than that offered by conventional press brake
tooling.
13
HEMMING
(27GA —16GA)
HEMMING
(27GA —11GA)
14
15
MARK FREE BENDING
16
MATCHING 2-V DIES WITH
SECTIONALIZED 2-V DIES
Amanit coding is provided at no additional charge and is standard for all Amada press brake dies.
103
15
20
SECTIONALIZED
2 "V" DIE (P20-22)
2 "V" DIE
(P17-19)
STANDARD
PUNCH
20
URETHANE
SHEET
42621
42618
104
1046
12
105
-1-
300
CLAMP
STANDARD 1"V" OR 2"V"
DIE WITH RADIUS OPENING
29100
29300
-2-
INCREASE YOUR BENDING PRODUCTIVITY WITH ONE TOUCH
88º & 90º PUNCHES
TOOL
NUMBER
AMADA ONE TOUCH PUNCH HOLDER
Amada’s One Touch Holder and tooling allows the brake operator to
change punches on the press brake quickly and safely without the
need for a wrench. The patented One Touch design allows you to
decrease your tooling changeover time, thereby increasing your
bending productivity. One Touch Tool Holders and accessories are
available for all Amada press brake models.
STANDARD
ONE TOUCH
RADIUS (R)
60402
00402
.008
60408
00408
.030
60415
00415
.060
60423
00423
.090
88º
30
60430
00430
.120
60448
00448
.188
64802
14802
.008
64808
14808
.030
64815
14815
.060
64823
14823
.090
88º
14
64830
14830
.120
64848
14848
.188
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
90º
30
$335.00
$194.00
90º
14
$480.00
—
32.87"
(835 mm)
16.34"
(415 mm)
1.024
4
SOLID
1.181
1.378
Fast and Easy Tool Set-up
2.634
With the One Touch Punch Holder, installation is a simple
two-step process.
1.378
.394
Simply slide the grooved punch into the One Touch Punch Holder.
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
148
R
SECTIONALIZED
Turn the lever to secure the punch in the One Touch Punch Holder.
ORDER CODE NUMBER
902000
U.S. Patents: No. 5,513,514 No. 5,685,191 No. 5,642,642
No. 5,511,407 No. 5,619,885
TOOL
NUMBER
• Reduce tooling set-up time
• Increase safety with the drop-prevention feature
• Insure properly tightened tools every time
• Increase productivity of the bending process
• No tools required to tighten punch
1.024
STANDARD
ONE TOUCH
RADIUS (R)
61602
01602
.008
61608
01608
.030
61615
01615
.060
61623
01623
.090
61630
01630
.120
64702
14700
.008
64708
14708
.030
64715
14715
.060
64723
14723
.090
64730
14730
.120
PRICE
1.181
16
For use on ZII style RG model press brake and all FBD, HFB & HFE model
press Brakes.
SOLID
1.378
2.634
1.378
R
NARROW DISTANCE PIECE SET
EDGE
ORDER CODE NUMBER
.394
147
SECTIONALIZED
1.024
ORDER CODE NUMBER
908000
1.181
These narrow punch holders replace the standard One Touch punch holder when
the standard size of punch holder interferes with the part being formed. These allow
clearance for side flanges that would normally hit the standard punch holder, while
holding the punch securely during use. Set contains widths of 25mm, 35mm,40mm
and 50mm.
TOOL
NUMBER
116
.394
2.635
SOLID
116SS*
SECTIONALIZED
.394
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
71602
11600
.008
90º
6
$450.00
$256.00
71682
11680
.008
90º
3
$590.00
—
EDGE
ORDER CODE NUMBER
Hardness HRC is 45-49.
.197
R
-3-
* Semi-Standard Length (Ear Type): .39 + .59 + .79 + 1.57 + 1.97 + 3.94 + 3.94 + 6.50 +
11.81 + = 31.50" (1 set)
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
-4-
88º & 90º NARROW RELIEF PUNCH
88º & 90º GOOSENECK PUNCHES
2.559
1.024
TOOL
NUMBER
1.181
60492
SOLID
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
60492
00490
.008
88º
24
EDGE
ORDER CODE NUMBER
TOOL
NUMBER
1.181
16.34"
(415 mm)
47
SOLID
$252.00
52
4.721
1.378
64892
SECTIONALIZED
2.634
64892
14890
.008
88º
12
—
TOOL
NUMBER
1.44
.039
2.205
1.024
TOOL
NUMBER
61692
SOLID
1.378
64792
SECTIONALIZED
2.634
SOLID
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
61692
01690
.008
90º
24
$474.00
$252.00
64792
14790
.008
90º
12
$576.00
—
EDGE
ORDER CODE NUMBER
45
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
1.181
32.87"
(835 mm)
16.34"
(415 mm)
4.13
50
1.378
SECTIONALIZED
.394
R
R
.394
.039
ANGLE
74702
04702
.008
88º
15
$1,350.00
$785.00
75202
05202
.008
88º
14
$1,750.00
—
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
88º
15
$785.00
$425.00
88º
14
$994.00
–
16.34"
(415 mm)
EDGE
ORDER CODE NUMBER
STANDARD
ONE TOUCH
RADIUS(R)
64502
04502
.008
64508
04508
.030
64515
04515
.060
64530
04530
.120
65002
05002
.008
65008
05008
.030
65015
05015
.060
65030
05030
.120
PRICE
1.378
Hardness HRC is 45-49.
1.378
RADIUS(R)
.394
.394
1.181
ONE TOUCH
Hardness HRC is 45-49.
R
R
SECTIONALIZED
STANDARD
32.87"
(835 mm)
1.378
Hardness HRC is 45-49.
1.378
1.378
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
Hardness HRC is 45-49.
88º & 90º MULTI RELIEF NARROW PUNCH
2.205
TOOL
NUMBER
1.181
46
1.024
SOLID
TOOL
NUMBER
1.181
60482
1.378
SOLID
64882
2.634
SECTIONALIZED
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
60482
00480
.008
88º
12
$514.00
$276.00
64882
14882
.008
88º
6
$618.00
—
EDGE
ORDER CODE NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
51
4.130
1.378
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
(TON/FOOT)
16.34"
(415 mm)
64602
04600
.008
90º
15
$785.00
$425.00
65102
05102
.008
90º
14
$994.00
—
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
88º
21
$720.00
$382.00
88º
14
$942.00
—
.394
R
TOOL
NUMBER
Hardness HRC is 45-49.
.394
R
PRICE
32.87"
(835 mm)
Hardness HRC is 45-49.
1.378
1.378
.118
SECTIONALIZED
ALLOWABLE
TONNAGE
EDGE
ORDER CODE NUMBER
EDGE
ORDER CODE NUMBER
STANDARD
ONE TOUCH
RADIUS(R)
65202
45202
.008
65208
45208
.030
65215
45215
.060
65230
45230
.120
75002
15002
.008
75008
15008
.030
75015
15015
.060
75030
15030
.120
PRICE
.157
2.205
452
SOLID
1.181
1.024
TOOL
NUMBER
1.181
61682
SOLID
1.378
2.634
SECTIONALIZED
1.378
-5-
.157
ONE TOUCH
RADIUS(R)
ANGLE
61682
01680
.008
90º
12
EDGE
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$514.00
$276.00
3.54
1.378
1.378
150
64782
Hardness HRC is 45-49.
.118
R
64782
STANDARD
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE NUMBER
14780
.008
90º
6
$618.00
—
R
.394
SECTIONALIZED
.394
Hardness HRC is 45-49.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
-6-
88º & 90º SASH PUNCHES
88º & 90º GOOSENECK PUNCHES
1.063
2.205
TOOL
NUMBER
1.181
462
SOLID
1.378
3.539
151
SECTIONALIZED
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
66202
46202
.008
90º
21
$753.00
$400.00
75102
15102
.008
90º
14
$960.00
—
EDGE
ORDER CODE NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
1.181
109
SOLID
107
3.740
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
60902
10902
.008
88º
15
$550.00
$291.00
60700
10700
.008
88º
3.7
$900.00
—
32.87"
(835 mm)
16.34"
(415 mm)
16.34"
(415 mm)
.394
TOOL
NUMBER
1.181
108
SOLID
TOOL
NUMBER
2.205
EDGE
ORDER CODE NUMBER
STANDARD
ONE TOUCH
RADIUS(R)
65302
45302
.008
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
32.87"
(835 mm)
106
3.740
16.34"
(415 mm)
.984
.787
453
SOLID
65308
45308
.030
65315
45315
.060
88º
15
$753.00
SECTIONALIZED
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
70802
10800
.008
90º
15
$550.00
$291.00
60600
10600
.008
90º
3.7
$900.00
—
32.87"
(835 mm)
16.34"
(415 mm)
Hardness HRC is 45-49.
$400.00
1.063
65330
.984
155
.394
R
SECTIONALIZED
65502
45330
15502
.120
.008
202
88º
65508
15508
TOOL
NUMBER
1.181
9
$947.00
—
SOLID
.030
.394
3.934
.984
20280
SECTIONALIZED
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
60200
20200
.008
88º
9
$725.00
$421.00
60282
20280
.008
88º
5
$963.00
—
32.87"
(835 mm)
16.34"
(415 mm)
EDGE
ORDER CODE NUMBER
.787
Hardness HRC is 45-49.
Hardness HRC is 45-49.
.394
R
1.063
2.205
TOOL
NUMBER
1.181
463
SOLID
3.539
1.181
156
SECTIONALIZED
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
66302
46302
.008
90º
15
$753.00
$400.00
65602
15602
.008
90º
9
$947.00
—
EDGE
ORDER CODE NUMBER
32.87"
(835 mm)
TOOL
NUMBER
1.181
200
16.34"
(415 mm)
SOLID
.394
.984
2.752
200SS*
SECTIONALIZED
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
60002
20002
.008
88º
9
$470.00
$274.00
60082
20080
.008
88º
5
$517.00
—
EDGE
ORDER CODE NUMBER
* Semi-Standard Length (Ear Type): .39 + .59 + .79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 +
11.81 = 31.50” (1 set)
.787
R
.984
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
3.54
1.181
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
.394
R
1.181
.394
Hardness HRC is 45-49.
.394
1.063
TOOL
NUMBER
1.181
201
SOLID
.394
201SS*
2.752
.984
R
SECTIONALIZED
PRICE
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
60102
20102
.008
90º
9
$514.00
$291.00
60182
20100
.008
90º
5
$544.00
—
ORDER CODE NUMBER
EDGE
32.87"
(835 mm)
16.34"
(415 mm)
* Sem-Standard Length (Ear Type): .39 + .59 + .79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 +
11.81 = 31.50” (1 set)
.787
-7-
32.87"
(835 mm)
.394
1.063
R
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
Hardness HRC is 45-49.
.787
R
R
SECTIONALIZED
.984
Hardness HRC is 45-49.
1.378
TOOL
NUMBER
.394
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
-8-
ACUTE ANGLE PUNCHES
RADIUS PUNCHES
1.063
1.063
1.181
TOOL
NUMBER
210
SOLID
210SS*
SECTIONALIZED
4.095
.787
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
61000
21000
.026
30º
30
$600.00
$320.00
61086
21080
.026
30º
9
$750.00
—
EDGE
ORDER CODE NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
60300
00300
.240
60º
30
$364.00
$236.00
73800
13800
.240
60º
30
$710.00
—
3
SOLID
1.181
32.87"
(835 mm)
16.34"
(415 mm)
Hardness HRC is 45-49.
1.378
Hardness HRC is 45-49.
138
SECTIONALIZED
2.559
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
TOOL
NUMBER
1.181
* Semi—Standard Length (Ear Type): .39 + .59 + .79 +1.57 + 1.97 + 3.94 + 3.94 + 6.50 +
11.81 = 31.50” (1 set)
.709
R
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
.472
R
.472
1.535
ORDER CODE NUMBER
TOOL
NUMBER
1.181
TOOL
NUMBER
1.181
8
SOLID
49
SECTIONALIZED
EDGE
ORDER CODE NUMBER
STANDARD
ONE TOUCH
RADIUS(R)
ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
32.87"
(835 mm)
63000
23000
0.689
30
$729.00
$374.00
63100
23100
0.689
30
$839.00
—
32.87"
(835 mm)
16.34"
(415 mm)
$536.00
$294.00
231
SECTIONALIZED
2.559
16.34"
(415 mm)
16.34"
(415 mm)
ONE TOUCH
SOLID
1.181
32.87"
(835 mm)
STANDARD
230
1.024
EDGE (R)
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 45-49.
.984
60800
00800
.015
45º
18
$390.00
$212.00
64902
04902
.015
45º
9
$483.00
—
R
.472
2.614
.787
Hardness HRC is 45-49.
FLATTENING PUNCHES
.709
R
.472
1.575
TOOL NUMBER
1.024
ORDER CODE NUMBER
EDGE
TOOL
NUMBER
STANDARD
ONE TOUCH
ANGLE
215
71500
21500
45º
ONE TOUCH
62000
22000
30
220
2.559
1.181
STANDARD
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE NUMBER
PRICE
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
30
$491.00
$254.00
Hardness HRC is 45-49.
.906
2.638
Hardness HRC is 45-49.
R
.118
1.102
TOOL NUMBER
ORDER CODE NUMBER
20
02000
ALLOWABLE
TONNAGE
(TON/FOOT)
.669
1.181
-9-
30
PRICE
32.87"
16.34"
(835 mm) (415 mm)
$132.00
$79.00
Mounts in #15 Punch Holder (shown on next page)
Hardness HRC is 23-28.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 10 -
PUNCH HOLDERS & RADIUS RULERS
PUNCH HOLDERS & RADIUS RULERS
PUNCH HOLDER
1.063
1.063
.787
1.181
TOOL NUMBER
2.638
PRICE
ALLOWABLE
ORDER CODE NUMBER
STANDARD
ONE TOUCH
TONNAGE
(TON/FOOT)
61500
01500
—
15
.591
32.87"
(835 mm)
16.34"
(415 mm)
$284.00
$169.00
PRICE
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01715
01715
.591
30
$119.00
32.87"
(835 mm)
16.34"
(415 mm)
$90.00
32.87"
(835 mm)
16.34"
(415 mm)
$68.00
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
Hardness HRC is 23-28.
1.063
.787
PRICE
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01762
01762
.625
30
$141.00
32.87"
(835 mm)
16.34"
(415 mm)
$75.00
.551
.625
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
RADIUS RULERS
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01737
01737
.375
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$128.00
$69.00
PRICE
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01717
01717
.689
30
$125.00
32.87"
(835 mm)
16.34"
(415 mm)
$119.00
.63
1.26
.375
.866
.689
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01710
01710
.394
30
32.87"
(835 mm)
16.34"
(415 mm)
$91.00
$51.00
.63
.945
1.339
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
01775
01775
.750
30
$177.00
32.87"
(835 mm)
16.34"
(415 mm)
$154.00
$83.00
.750
.394
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
TOOL NUMBER
.866
ORDER CODE NUMBER
01750
.500
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
- 11 -
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
01750
EDGE (R)
.500
ALLOWABLE
TONNAGE
(TON/FOOT)
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$135.00
$87.00
1.339
.945
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01720
01720
.787
30
PRICE
.787
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 12 -
PUNCH HOLDERS & RADIUS RULERS
QUICK CHANGE 2 "V" DIES
.197
.138
TOOL NUMBER
1.457
1.063
ORDER CODE NUMBER
01787
01787
EDGE (R)
.875
ALLOWABLE
TONNAGE
(TON/FOOT)
30
PRICE
32.87"
(835 mm)
$231.00
.157
.276
16.34"
(415 mm)
501
SOLID
$134.00
501
1.811
.875
TOOL
NUMBER
SECTIONALIZED
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
PRICE
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
50190
90º
18
$398.00
$225.00
50180
90º
18
$480.00
—
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
50290
90º
21
$398.00
$225.00
50280
90º
21
$480.00
—
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
50390
90º
21
$398.00
$225.00
50380
90º
21
$480.00
—
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
50490
88º
30
$398.00
$225.00
50480
88º
30
$480.00
—
32.87"
16.34"
(835 mm) (415 mm)
Hardness HRC is 65-69.
1.358
1.142
1.535
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01725
01725
.984
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$179.00
$110.00
.984
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
.177
.256
.236
.394
TOOL
NUMBER
502
SOLID
502
1.811
SECTIONALIZED
PRICE
Hardness HRC is 65-69.
1.142
1.535
PRICE
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
01700
01700
1.000
30
$216.00
$133.00
1.457
1.00
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
.217
.295
.315
.472
TOOL
NUMBER
503
SOLID
1.181
1.339
1.732
TOOL NUMBER
ORDER CODE NUMBER
EDGE (R)
ALLOWABLE
TONNAGE
(TON/FOOT)
01730
01730
1.181
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$219.00
$129.00
503
1.811
SECTIONALIZED
PRICE
Hardness HRC is 65-69.
1.535
Hardness HRC is 23-28.
Mounts on #15 Punch Holder.
.413
.335
.551
.709
TOOL
NUMBER
504
SOLID
504
1.811
SECTIONALIZED
PRICE
Hardness HRC is 65-69.
1.772
- 13 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 14 -
QUICK CHANGE ACUTE ANGLE 2 "V" DIE
QUICK CHANGE 2 "V" DIES
.295
.472
.472
.787
TOOL
NUMBER
505
SOLID
1.811
505
SECTIONALIZED
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
88º
30
$398.00
$225.00
88º
30
$480.00
—
ORDER CODE
NUMBER
V ANGLE
50590
50580
.492
1.024
.472
.315
TOOL
NUMBER
50337
SOLID
1.575
50338
SECTIONALIZED
Hardness HRC is 65-69.
PRICE
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
50337
30º
6
$714.00
$570.00
50338
30º
6
$858.00
—
.551
ORDER CODE
NUMBER
Hardness HRC is 65-69 .
1.791
2.067
.374
.571
.63
.984
TOOL
NUMBER
506
SOLID
506
1.811
SECTIONALIZED
PRICE
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
50690
88º
30
$398.00
$225.00
50680
88º
30
$480.00
—
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
51190
90º
24
$491.00
$366.00
51180
90º
24
$575.00
—
32.87"
(835 mm)
16.34"
(415 mm)
ORDER CODE
NUMBER
Hardness HRC is 65-69.
1.969
.315
.236
.394
.236
TOOL
NUMBER
511
.059
SOLID
.098
511
1.811
SECTIONALIZED
Die has larger shoulder radius for reduced die marks.
Hardness HRC is 65-69.
1.575
.394
.551
.472
.787
TOOL
NUMBER
514
1.811
.118
.157
SOLID
514
SECTIONALIZED
1.969
- 15 -
PRICE
PRICE
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
51490
88º
30
$491.00
$366.00
51480
88º
30
$575.00
—
Die has larger shoulder radius for reduced die marks.
Hardness HRC is 65-69.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 16 -
88º & 90º 2 "V" DIES
88º & 90º 2 "V" DIES
.138
.157
.197
.276
1.024
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
121
12100
90º
18
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$237.00
$137.00
.335
.551
.709
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
12590
12590
90º
30
$237.00
32.87"
(835 mm)
16.34"
(415 mm)
$137.00
.413
32.87"
(835 mm)
16.34"
(415 mm)
$137.00
1.004
Hardness HRC is 65-69.
Hardness HRC is 65-69.
1.969
1.969
.256
.394
.177
.236
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
123
12300
90º
21
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$237.00
$137.00
.295
.787
.472
Hardness HRC is 65-69.
.315
.472
1.024
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
124
12400
90º
24
.295
.472
32.87"
(835 mm)
16.34"
(415 mm)
.472
.787
$237.00
$137.00
1.004
Hardness HRC is 65-69.
.551
.709
1.024
1.969
- 17 -
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
125
12500
88º
30
Hardness HRC is 65-69.
126
12600
88º
30
$237.00
32.87"
(835 mm)
16.34"
(415 mm)
$137.00
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$237.00
$137.00
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
12690
12690
90º
30
$237.00
32.87"
(835 mm)
16.34"
(415 mm)
$237.00
$137.00
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
127
12700
88º
21
.571
.374
.984
.63
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 65-69.
1.969
.413
V ANGLE
PRICE
1.969
.335
ORDER CODE NUMBER
Hardness HRC is 65-69.
1.969
1.969
.295
TOOL NUMBER
1.024
1.024
.217
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
.472
PRICE
1.024
Hardness HRC is 65-69.
1.969
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 18 -
88º & 90º 2 "V" DIES
.374
.571
.63
.984
SECTIONALIZED 88º & 90º 2 "V" DIES
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
12790
12790
90º
21
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$237.00
$137.00
.138
.197
.157
.276
1.811
1.004
Hardness HRC is 65-69.
1.969
.394
.236
.394
1.024
.059
.098
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
311
31100
90º
24
16.34"
(415 mm)
$249.00
$143.00
.177
.256
.236
.394
.472
1.024
.787
V ANGLE
30140
30140
90º
18
$474.00
32.87"
(835 mm)
16.34"
(415 mm)
—
—
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
30240
30240
90º
21
$474.00
32.87"
(835 mm)
16.34"
(415 mm)
—
Sectionalized match to die #123.
Hardness HRC is 65-69.
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
314
31400
88º
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$249.00
$143.00
.217
.295
.315
.472
.118 .157
Die has larger shoulder radius for reduced die marks.
Hardness HRC is 65-69.
2.165
16.34"
(415 mm)
1.811
1.969
.591
ORDER CODE NUMBER
PRICE
32.87"
(835 mm)
Die has larger shoulder radius for reduced die marks.
Hardness HRC is 65-69.
.394
TOOL NUMBER
32.87"
(835 mm)
Sectionalized match to die #121.
Hardness HRC is 65-69.
1.969
.236
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
30340
30340
90º
21
$474.00
32.87"
(835 mm)
16.34"
(415 mm)
$474.00
—
1.811
Sectionalized match to die #124.
Hardness HRC is 65-69.
1.969
ACUTE ANGLE 2 "V" DIE
.571
.709
.315
.472
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
337
33700
30º
9
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$386.00
$231.00
.335
.413
.551
.709
1.811
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
30440
30440
88º
30
PRICE
1.496
Hardness HRC is 65-69.
2.362
- 19 -
1.969
Sectionalized match to die #125.
Hardness HRC is 65-69.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 20 -
SECTIONALIZED 88º & 90º 2 "V" DIES
SECTIONALIZED 88º & 90º 2 "V" DIES
.335
.413
.551
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
30449
30449
90º
30
$474.00
—
.709
1.791
.394
.591
.472
.787
PRICE
.118
.157
1.811
Sectionalized match to die #12590.
Hardness HRC is 65-69.
1.969
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
31440
31440
88º
30
$479.00
32.87"
(835 mm)
16.34"
(415 mm)
—
32.87"
(835 mm)
16.34"
(415 mm)
—
Sectionalized match to die #314.
Hardness HRC is 65-69.
Die has larger shoulder radius for reduced die marks.
2.165
SECTIONALIZED LOW PROFILE 2 "V" DIES
.472
.295
.472
.787
TOOL NUMBER
30540
ORDER CODE NUMBER
30540
V ANGLE
88º
ALLOWABLE
TONNAGE
(TON/FOOT)
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$474.00
—
.177
.256
.236
.394
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
30210
30210
90º
21
$381.00
32.87"
(835 mm)
16.34"
(415 mm)
—
1.811
.63
Sectionalized match to die #126.
Hardness HRC is 65-69.
1.969
1.969
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 65-69.
.571
.374
.630
.984
1.811
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
30640
30640
88º
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$474.00
—
.472
.315
.63
Sectionalized match to die #127.
Hardness HRC is 65-69.
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
30310
30310
90º
21
$384.00
32.87"
(835 mm)
16.34"
(415 mm)
$1,008.00
—
.295
.217
Hardness HRC is 65-69.
1.969
1.969
SECTIONALIZED ACUTE ANGLE 2 "V" DIES
.236
.394
.236
.394
TOOL NUMBER
1.811
.059
.098
31140
ORDER CODE NUMBER
31140
V ANGLE
90º
ALLOWABLE
TONNAGE
(TON/FOOT)
24
$479.00
.709
.571
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
.315
.472
—
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
33840
33840
30º
9
PRICE
2.283
2.165
Sectionalized match to die #311.
Hardness HRC is 65-69.
Die has larger shoulder radius for reduced die marks.
Hardness HRC is 65-69.
2.362
- 21 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 22 -
88º & 90º SASH 1 "V" DIES
SECTIONALIZED DIE RAIL & HOLDERS
DIE RAIL
.236
.394
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
300
30000
30
.590
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$225.00
$115.00
1.181
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
320
32000
90º
29
$202.00
32.87"
(835 mm)
16.34"
(415 mm)
$128.00
32.87"
(835 mm)
16.34"
(415 mm)
$128.00
Hardness HRC is 45-49.
1.969
.551
Hardness HRC is 23-28.
.315
HOLDERS
1.378
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
29000
29000
—
1.535
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$236.00
$133.00
1.181
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
321
32100
90º
29
$202.00
32.87"
(835 mm)
16.34"
(415 mm)
Hardness HRC is 45-49.
.551
Hardness HRC is 23-28.
2.362
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
322
32200
88º
29
$202.00
$128.00
323
32300
90º
29
$202.00
$128.00
32.87"
(835 mm)
16.34"
(415 mm)
.394
1.378
1.772
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
29300
29300
—
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$219.00
$157.00
1.181
Hardness HRC is 45-49.
.591
Hardness HRC is 23-28.
2.362
.472
1.378
2.953
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
29100
29100
—
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$404.00
$258.00
1.181
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
324
32400
88º
30
$202.00
$128.00
326
32600
90º
30
$202.00
$128.00
32.87"
(835 mm)
16.34"
(415 mm)
$202.00
$128.00
Hardness HRC is 45-49.
.669
Hardness HRC is 23-28.
2.362
.551
1.378
PRICE
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
29500
29500
—
$456.00
$340.00
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
325
32500
88º
30
PRICE
1.181
4.331
Hardness HRC is 45-49.
Hardness HRC is 23-28.
.709
2.362
- 23 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 24 -
RAIL TYPE SASH 1 "V" DIES
RAIL TYPE SASH 1 "V" DIES
.551
TOOL NUMBER
.236
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
90º
29
$480.00
$268.00
—
90º
29
—
—
$600.00
V ANGLE
07000
07080
.669
.472
70
SOLID
SECTIONALIZED
.984
.787
TOOL NUMBER
ORDER CODE
NUMBER
07100
71
SOLID
71
PRICE
.709
V ANGLE
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
.551
90º
29
$480.00
$268.00
—
07180
90º
29
—
—
TOOL NUMBER
07480
88º
29
—
—
$600.00
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
TOOL NUMBER
SECTIONALIZED
07500
88º
29
$480.00
$266.00
—
07580
88º
29
—
—
$600.00
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
07600
90º
29
$480.00
$266.00
—
07680
90º
29
—
—
$600.00
SECTIONALIZED
PRICE
Hardness HRC is 45-49.
16.34"
(415 mm)
SECTIONALIZED
88º
29
$480.00
$266.00
—
88º
29
—
—
$600.00
07200
07280
72
PRICE
32.87"
(835 mm)
V ANGLE
SECTIONALIZED
.669
.472
TOOL NUMBER
76
SOLID
.984
76
SECTIONALIZED
.591
Hardness HRC is 45-49.
.787
PRICE
Hardness HRC is 45-49.
.787
TOOL NUMBER
V ANGLE
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
07300
90º
29
$480.00
$266.00
—
07380
90º
29
—
—
$600.00
ORDER CODE
NUMBER
73
SOLID
73
SECTIONALIZED
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
.591
.591
—
75
$600.00
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE
NUMBER
72
.984
$266.00
.787
SOLID
.394
$480.00
75
.591
.591
.591
29
SOLID
.787
.984
88º
Hardness HRC is 45-49.
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 45-49.
.394
07400
74
.984
SECTIONALIZED
.591
SECTIONALIZED
.787
.551
.984
16.34"
(415 mm)
SECTIONALIZED
.591
.315
V ANGLE
32.87"
(835 mm)
SOLID
Hardness HRC is 45-49.
.591
TOOL NUMBER
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE
NUMBER
74
70
.984
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE
NUMBER
Hardness HRC is 45-49.
.787
- 25 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 26 -
ACUTE ANGLE 1 "V" DIES
ACUTE ANGLE 1 "V" DIES
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
41210
30º
5.2
.550
.157
TOOL NUMBER
4121
SOLID
.059
1.570
.590
.472
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
TOOL NUMBER
$730.00
$482.00
—
4126
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
41260
30º
7.0
$1,265.00
$730.00
—
41269
30º
7.0
—
—
$1,667.00
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
41270
30º
8.2
$1,265.00
$730.00
—
41279
30º
8.2
—
—
$1,667.00
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
41280
30º
9.4
$1,489.00
$920.00
—
41289
30º
9.4
—
—
$1,881.00
SOLID
4121
41219
SECTIONALIZED
30º
5.2
—
—
2.170
$1,140.00
4126
SECTIONALIZED
Hardness HRC is 45-49.
PRICE
ORDER CODE
NUMBER
Hardness HRC is 45-49.
.790
1.100
.630
TOOL NUMBER
.236
ORDER CODE
NUMBER
41230
4123
SOLID
1.570
.0790
.590
PRICE
.551
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
TOOL NUMBER
30º
4.9
$730.00
$482.00
—
4127
SOLID
4123
41239
SECTIONALIZED
30º
4.9
—
—
$1,140.00
2.280
.1570
4127
SECTIONALIZED
Hardness HRC is 45-49.
PRICE
Hardness HRC is 45-49.
.790
1.260
.315
TOOL NUMBER
ORDER CODE
NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
41240
30º
5.5
.630
PRICE
TOOL NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
$730.00
$482.00
—
—
$1,140.00
4128
4124
SOLID
1.690
.0790
SOLID
2.560
4124
41249
SECTIONALIZED
30º
5.5
—
.157
4128
SECTIONALIZED
PRICE
Hardness HRC is 45-49.
Hardness HRC is 45-49.
1.420
.750
TOOL NUMBER
V ANGLE
32.87"
(835 mm)
16.34"
(415 mm)
SECTIONALIZED
41250
30º
6.4
$1,096.00
$678.00
—
41259
30º
6.4
—
—
$1,518.00
ORDER CODE
NUMBER
4125
SOLID
1.890
.120
4125
SECTIONALIZED
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
.394
Hardness HRC is 45-49.
.940
- 27 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 28 -
SASH 1 'V" DIE RAIL & HOLDERS
LARGE "V" DIE HOLDER
DIE RAIL
.433
.591
.394
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
30
30009
—
PRICE
PRICE
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
55
55000
—
$1,325.00
32.87"
(835 mm)
16.34"
(415 mm)
$177.00
32.87"
(835 mm)
16.34"
(415 mm)
$975.00
2.165
32.87"
(835 mm)
16.34"
(415 mm)
$335.00
—
Hardness HRC is 23-28.
2.362
Hardness HRC is 23-28.
LARGE "V" DIES
.787
HOLDERS
.551
.709
3.209
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
330
33000
—
PRICE
32.87"
16.34"
(835 mm) (415 mm)
$452.00
2.362
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
340
34000
30º
24
$300.00
32.87"
(835 mm)
16.34"
(415 mm)
$200.00
$293.00
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
Hardness HRC is 23-28.
2.362
2.362
.551
TOOL NUMBER
2.421
80
ORDER CODE NUMBER
08000
ALLOWABLE
TONNAGE
(TON/FOOT)
—
.984
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$900.00
—
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
341
34100
30º
18
$336.00
32.87"
(835 mm)
16.34"
(415 mm)
$334.00
$203.00
2.559
Hardness HRC is 23-28.
2.362
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
2.362
LARGE "V" DIE HOLDER
1.26
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
50008
50008
—
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$398.00
$225.00
ORDER CODE NUMBER
V ANGLE
342
34200
45º
12
2.362
1.969
2.362
TOOL NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
Hardness HRC is 23-28.
2.362
- 29 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 30 -
LARGE "V" DIES
LARGE "V" DIES
1.575
2.480
3.15
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
343
34300
45º
21
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$492.00
$300.00
2.953
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
38
03800
85º
30
$592.00
32.87"
(835 mm)
16.34"
(415 mm)
$504.00
32.87"
(835 mm)
16.34"
(415 mm)
$318.00
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
2.362
3.150
2.362
3.15
3.15
1.260
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
35
03500
85º
30
2.362
32.87"
(835 mm)
16.34"
(415 mm)
$272.00
$142.00
3.74
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
13
01360
85º
30
$806.00
32.87"
(835 mm)
16.34"
(415 mm)
$880.00
PRICE
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
2.362
3.74
2.362
1.575
3.937
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
36
03600
85º
30
2.362
32.87"
(835 mm)
16.34"
(415 mm)
$312.00
$167.00
PRICE
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
18
01860
85º
30
$1,480.00
32.87"
(835 mm)
16.34"
(415 mm)
$1,490.00
$890.00
PRICE
4.331
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
2.362
4.724
2.362
4.921
1.969
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
37
03700
85º
30
2.362
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
TOOL NUMBER
ORDER CODE NUMBER
V ANGLE
ALLOWABLE
TONNAGE
(TON/FOOT)
39
03900
80º
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$309.00
$185.00
4.843
3.543
6.063
PRICE
Hardness HRC is 43-47.
2.362
- 31 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 32 -
POLYURETHANE DIES & DIE HOLDERS
LARGE "V" DIES
Holders
1.417
.984
TOOL NUMBER
.748 R
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
2.362
350
35000
30
$472.00
TOOL NUMBER
ORDER CODE NUMBER
HEIGHT (H)
60 (1)
06001
2.362
—
$468.00
32.87"
(835 mm)
16.34"
(415 mm)
$259.00
2.362
$278.00
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
$274.00
Hardness HRC is 43-47. Mounts on #50008 Die Holder.
Hardness HRC is 23-28. Mounts on #50008 Die Holder.
2.362
2.362
FLATTENING DIES
1.181
TOOL NUMBER
ORDER CODE NUMBER
HEIGHT (H)
60 (2)
06002
1.693"
—
$443.00
32.87"
(835 mm)
16.34"
(415 mm)
$695.00
1.693
2.362
.709
.394
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
12
01200
30
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$281.00
$169.00
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
Hardness HRC is 23-28. Mounts on #50008 Die Holder.
2.362
Hardness HRC is 23-28. Mounts on #50008 Die Holder.
.236
1.969
TOOL NUMBER
ORDER CODE NUMBER
HEIGHT (H)
60 (3)
06003
3.937"
—
$1,279.00
32.87"
(835 mm)
16.34"
(415 mm)
$770.00
3.937
3.937
3.780
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
105
10500
30
Hardness HRC is 23-28. Mounts on #50008 Die Holder.
PRICE
32.87"
(835 mm)
16.34"
(415 mm)
$1,092.00
$640.00
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
2.362
3.937
Hardness HRC is 43-47.
2.362
3.150
PRICE
TOOL NUMBER
ORDER CODE NUMBER
HEIGHT (H)
ALLOWABLE
TONNAGE
(TON/FOOT)
60 (4)
06004
3.268"
—
$1,269.00
60 (5)
06005
4.252"
—
$1,958.00 $1,155.00
3.268
2.362
4.724
Hardness HRC is 23-28. Mounts on #50008 Die Holder.
- 33 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 34 -
POLYURETHANE DIES & DIE HOLDER
HEMMING PUNCH & DIES
PUNCH
Dies
TOOL
NUMBER
A
ORDER CODE
NUMBER
A
B
ALLOWABLE
TONNAGE
(TON/FOOT)
06111 RED*
.984"
.984"
—
PRICE
32.87"
(835 mm)
$53.00
16.34"
(415 mm)
1.063
$29.00
1.181
61 (1)
06112 BLUE**
.984"
06121 RED*
1.181"
.984"
1.181"
—
—
$71.00
$62.00
2.579
06122 BLUE**
1.181"
1.181"
—
$75.00
.709
TOOL
NUMBER
A
06131 RED*
1.969"
1.969"
—
$213.00
$110.00
06132 BLUE**
1.969"
1.969"
—
$265.00
$142.00
32.87"
(835 mm)
16.34"
(415 mm)
ONE TOUCH
EDGE (R)
ANGLE
70300
10300
.020
30º
30
$450.00
$265.00
70380
10380
.020
30º
30
$590.00
—
10380*
SECTIONALIZED
32.87"
(835 mm)
16.34"
(415 mm)
Hardness HRC is 45-49.
*Semi-Standard Lenghth (Ear Type): .39 + .59 + .79 + 1.57 + 1.97 +
3.94 + 3.94 + 6.50 + 11.81 = 31.50" (1 set)
.472
R .02
PRICE
ORDER CODE
NUMBER
A
B
ALLOWABLE
TONNAGE
(TON/FOOT)
06141 RED*
3.150"
1.181"
—
$189.00
$101.00
06142 BLUE**
3.150"
1.181"
—
$271.00
$135.00
06151 RED*
4.330"
1.772"
—
$414.00
$212.00
06152 BLUE**
4.330"
1.772"
—
$529.00
$271.00
DIE ASSEMBLY
.63
A
61 (4)
B
.787
R .315
$40.00
61 (3)
STANDARD
SOLID
$32.00
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
EDGE
ORDER CODE NUMBER
103
$37.00
61 (2)
B
TOOL
NUMBER
61 (5)
A
32.87"
(835 mm)
16.34"
(415 mm)
16 GA CRS
18 GA SS
.315"
20
$1,225.00
$730.00
18 GA CRS
20 GA SS
.236"
20
$1,225.00
$730.00
TOOL NUMBER
ORDER CODE
NUMBER
MAX
MATERIAL
104
10409
1046
10469
4.606
*80 Shore "A" scale hardness
**90 Shore "A" scale hardness
.394
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
R .039
Hardness HRC is 45-49.
STANDARD OFFSET TOOLS
2.362
REPLACEMENT DIE BLOCK
1.181
TOOL NUMBER
ORDER CODE NUMBER
WIDTH (A)
ALLOWABLE
TONNAGE
(TON/FOOT)
60421
60421
.125"
30
1.181
60422
2.362
A
1.378
A
60422
.188"
30
PRICE
MAX
MATERIAL
(CRS)
32.87"
(4835mm)
18 GA
$1,100.00
18 GA
A
32.87"
(835 mm)
16.34"
(415 mm)
80130
.315"
20
$520.00
$320.00
80140
.236"
20
$520.00
$320.00
TOOL NUMBER
ORDER CODE NUMBER
New Style
A
ALLOWABLE
TONNAGE
(TON/FOOT)
32.87"
(835 mm)
16.34"
(415 mm)
104R
80139
.315"
20
$520.00
$320.00
1046R
80149
.236"
20
$520.00
$320.00
TOOL NUMBER
104R
1046R
$1,100.00
60229
60229
.250"
30
18 GA
$1,100.00
60424
60424
.375"
30
16 GA
$1,100.00
60425
60425
.500"
30
16 GA
$1,100.00
60426
60426
.313"
30
16 GA
$1,100.00
60427
60427
.438"
30
16 GA
$1,100.00
Hardness HRC is 45-49.
1.280
4.330
4.330
Hardness HRC is 23-28.
Tolerances after bending, using the above offset tools = +/- .020.
Specify standard or One Touch style.
1.181
PRICE
Hardness HRC is 45-49.
1.378
4.528
-35 -
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
ORDER CODE NUMBER
Old Style
4.528
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 36 -
ASTRO ROBOTIC TOOLING
PRESS BRAKE TOOLING ADAPTERS FROM AMADA AMERICA, INC.
PUNCH
COMBO PUNCH ADAPTER
ORDER CODE NUMBER
SOLID
SECTIONALIZED
51100
51200
ANGLE
32.87"
(LONG)
16.34"
(SHORT)
SECTIONALIZED
88º
$1,271.00
$665.00
$1,464.00
HINGED EAR SECTIONS FOR ABOVE PUNCH
90.00
ORDER CODE NUMBER
DESCRIPTION
PRICE
51300
HINGED EAR SECTIONS
$2,370.00
R .6
88º
ORDER CODE NUMBER
PRICE
95300
$450.00 each
• Enable the fabricator to utilize Amada European style tooling or Conventional style
tooling all in one Distance Piece.
ORDER CODE NUMBER
SOLID
SECTIONALIZED
DIE
DESCRIPTION
V
V ANGLE (Z)
32.87"
(LONG)
• No changing of distance pieces.
16.34"
(SHORT)
SECTIONALIZED
80400
80480
.157"
90º
$1,187.00
$893.00
$1,523.00
80408
80488
.157"
88º
$1,187.00
$893.00
$1,523.00
80600
80680
.236"
90º
$1,187.00
$893.00
$1,523.00
80608
80688
.236"
88º
$1,187.00
$893.00
$1,523.00
80800
80880
.315"
90º
$1,187.00
$893.00
$1,523.00
80808
80888
.315"
88º
$1,187.00
$893.00
$1,523.00
81000
81080
.394"
90º
$1,187.00
$893.00
$1,523.00
81008
81088
.394"
88º
$1,187.00
$893.00
$1,523.00
81200
81280
.472"
90º
$1,187.00
$893.00
$1,523.00
81208
81288
.472"
88º
$1,187.00
$893.00
$1,523.00
81400
81480
.551"
90º
$1,187.00
$893.00
$1,523.00
81408
81488
.551"
88º
$1,187.00
$893.00
$1,523.00
• The COMBO PUNCH ADAPTER has an adjustment wedge to eliminate shimming and
crowning problems.
• Mount easily to any Amada Press Brake.
• 2 Adapters recommended for every 32.87" of upper beam.
Z
V
CONVENTIONAL DIE ADAPTERS
60
DIE HOLDER
- 37 -
ORDER CODE NUMBER
DESCRIPTION
32.87"
(LONG)
16.34"
(SHORT)
53200
ASTRO DIE HOLDER
$987.00
$593.00
_
ORDER CODE NUMBER - Length
PRICE
70201 - 32.87" Length
$690.00
70201 - 16.34" Length
$375.00
The die adapters are used to adapt conventional dies to the Amada Press Brake. They mount
just like the standard Amada die holders. A slot allows for the seating of the conventional die
and set screws along the length of tightening. This adapter is available in the standard long
and short lengths.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 38 -
PRESS BRAKE ACCESSORIES
PRESS BRAKE ACCESSORIES
DEEP PUNCH HOLDER
DEEP PUNCH HOLDER
TOOL NUMBER
ORDER CODE NUMBER
ALLOWABLE
TONNAGE
(TON/FOOT)
94000
94000
10
PRICE
7.784"
(200 mm)
TOOL NUMBER
$880.00
94000
Hardness HRC is 23-28.
Specify standard or One Touch style.
QUICK SET DIE HOLDER
ORDER CODE NUMBER
7.784"
(200 mm)
94000
10
$880.00
Hardness HRC is 23-28.
Specify standard or One Touch style.
• Lock or unlock a full bed-length of die with one twist of a handle.
• Modular design allows multiple die holders to be operated by one handle.
• Same profile as standard die holder (H=75mm).
QUICK SET DIE HOLDER
• Lock or unlock a full bed-length of die with one twist of a handle.
• Modular design allows multiple die holders to be operated by one handle.
• Same profile as standard die holder (H=75mm).
TOOL NUMBER
ORDER CODE NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
TOOL NUMBER
ORDER CODE NUMBER
32.87"
(835 mm)
16.34"
(415 mm)
90400
90400
$705.00
$450.00
90400
90400
$705.00
$450.00
Bolts and washers/set for use with Quick-Set Die Holder
Bolts and washers/set for use with Quick-Set Die Holder
TOOL NUMBER
ORDER CODE NUMBER
PRICE
TOOL NUMBER
ORDER CODE NUMBER
PRICE
90500
90500
$44.00
90500
90500
$44.00
SIDE GAUGE AND ADJUSTABLE ANGLE SIDE GAUGE
- 39 -
PRICE
ALLOWABLE
TONNAGE
(TON/FOOT)
SIDE GAUGE AND ADJUSTABLE ANGLE SIDE GAUGE
Side Gauge
Side Gauge
Side Gauge used to square parts with the bend line. Mounts directly
on "V" die to help correctly align those small, hard to handle parts.
Side Gauge used to square parts with the bend line. Mounts directly
on "V" die to help correctly align those small, hard to handle parts.
TOOL NUMBER
ORDER CODE NUMBER
PRICE
TOOL NUMBER
ORDER CODE NUMBER
PRICE
93000
93000
$330.00
93000
93000
$330.00
Adjustable Angle Side Gauge
Adjustable Angle Side Gauge
Same as Side Gauge but with a squaring arm that rotates 100°
to provide "bending at an angle."
Same as Side Gauge but with a squaring arm that rotates 100°
to provide "bending at an angle."
TOOL NUMBER
ORDER CODE NUMBER
PRICE
TOOL NUMBER
ORDER CODE NUMBER
PRICE
93200
93200
$830.00
93200
93200
$830.00
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
- 40 -
PRESS BRAKE ACCESSORIES
PRESS BRAKE ACCESSORIES
NARROW PUNCH HOLDER
REPLACEMENT PARTS
#60578
Allows greater clearance between punch holders for more flexibility.
For use on Z-1 press brakes or for stacking with Z-2 style holder.
REPLACEMENT CLAMP PLATE WITH SAFETY TONGUE
#60579
Same as above, but for use on Z-2 style press brakes only.
#60578
ORDER CODE NUMBER
PRICE
60578
$330.00
60579
$330.00
#60579
URETHANE ROLL
ORDER CODE NUMBER
DESCRIPTION
PRICE
42621
.015" thick urethane for mark-free bending for use on 16 ga. mat’l and thinner.
$172.00
42618
.030" thick urethane for mark-free bending for use on 16 ga. mat’l and thicker.
$236.00
TOOL NUMBER
TOOL NUMBER
96100
96100
DESCRIPTION
PRICE
Clamp Plate
$30.00
REPLACEMENT "V" DIE BOLTS
TOOL NUMBER
TOOL NUMBER
DESCRIPTION
PRICE
80010
80010
Set Bolt for 2V Die M8 X 25
$1.00
80020
80020
Spring for 1V Die and 2V Die
$2.00
80030
80030
Washer for 2V Die M8
$2.00
80040
80040
Set Bolt for 1V Die M8 X 30
$1.00
80050
80050
Washer for 1V Die
$4.00
Long size die requires 4 sets of bolts, springs and washers. Short size die requires 2 sets of bolts, springs and washers.
Both urethane rolls above are 6" wide x 100' long.
REPLACEMENT BOLTS FOR HEMMING TOOL
MARKLESS MATERIAL PROTECTION
ORDER CODE NUMBER
PRICE
DESCRIPTION
92002024
SA50-REPLACEMENT MATERIAL (LIGHT)
(12 ROLLS )
(EACH ROLL CONTAINS 25'OF MATERIAL) 18 GA & THINNER
$325.00
92002023
DA50-REPLACEMENT MATERIAL (HEAVY)
(12 ROLLS )
(EACH ROLL CONTAINS 25'OF MATERIAL) 16 GA & THICKER
$325.00
TOOL NUMBER
TOOL NUMBER
DESCRIPTION
PRICE
80069
80069
M8 X 55 Stripper Bolt
$3.00
80080
80080
Spring
$4.00
ORDER CODE NUMBER
PRICE
SIDE STOPPERS
PRESS BRAKE CABINET
TOOL NUMBER
DESCRIPTION
PRICE
99570240
PRESS BRAKE CABINET WITH MOBILE
BASE AND RETAINER TOP WITH MAT
$1885.00
99570241
PRESS BRAKE CABINET WITH FORKLIFT
BASE AND RETAINER TOP WITH MAT
$1885.00
99570242
MAPLE TOP INSTEAD OF RETAINER TOP
(COMES WITH MOBILE BASE)
$110.00
93600
Shown with optional mobile base kit.
- 41 -
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
-42 -
AIR BENDING FORCE CHART
TOOLING ORDER FAX FORM
1-800-423-7144
Die Opening Selection Formula
t
Amada America, Inc
GAUGE
12 OR LESS
11-5/16"
3/8" - 1/2"
5/8" UP
INCHES
.105 OR LESS
.120 - .313
.375 - .500
.625 AND UP
6Xt
8Xt
10 X t
12 X t
"V" SIZE
7025 FIRESTONE BLVD. BUENA PARK, CA 90621
PHONE: (800) 588-6683 FAX: (800) 423-7144
The above formulas are for reference only. For more detailed information refer to the chart below.
If the material thickness and inside bend radius are known,
the following can be obtained from the chart below:
1. Pressure required for bending the material for 1 foot.
2. Opening of the die to be used.
3. Minimum bendable flange length.
PURCHASE ORDER NUMBER :
MACHINE TYPE :
COMPANY :
COMPANY CONTACT:
SHIP TO ADDRESS:
t
INSIDE RADIUS OF
BEND
FAX:
PHONE:
SHIP VIA: (PLEASE CHECK ONE)
ir
ZIP:
STATE:
CITY:
Material thickness
2
(tensile strength: 56892-71115 lbs/in
Tons per 1 foot
Inside bend radius
Minimum flange length
Die opening
F
ir
b
v
ACCOUNT NUMBER:
TONS/FT
F
t
DATE:
UPS
OVERNIGHT AM
UPS
OVERNIGHT
STANDARD
ONE TOUCH
UPS
2 DAYS
UPS
3 DAYS
UPS
GROUND (5~7 DAYS)
OTHER
MIN. FLANGE
LENGTH
b
PUNCH STYLE:
WIDTH OF
V DIE
OPENING
V
SPECIAL INSTRUCTIONS:
THICKNESS
t
MILD STEEL
GAUGE DEC.
4
6
7
8
10
12
14
16
18
20
25
32
40
50
63
80
100
125
160
.156
.250
.281
.313
.375
.500
.563
.625
.688
.750
1.000
1.250
1.500
2.000
2.500
3.000
4.000
5.000
6.000
8.000 10.000 inches
200
250
.125
.188
.203
.219
.281
.344
.406
.438
.531
.563
.688
.875
1.125
1.375
1.750
2.188
2.188
3.500
4.500
5.500
6.875 inches
.031
.031
.047
.047
.063
.078
.094
.109
.125
.141
.156
.203
.250
.313
.406
.516
.625
.750
1.031
1.313
1.625 inches
5.4
3.6
3.0
2.5
2.0
1.7
6.8
5.8
4.8
3.7
2.7
2.4
2.0
7.8
6.2
5.0
4.2
3.5
3.1
2.7
11.0
8.2
7.0
5.5
4.8
4.1
3.1
15.0
13.0
11.0
9.4
7.4
5.5
4.0
16.0
13.0
10.0
7.3
5.0
12.0
9.0
6.2
4.7
24.0
15.0
11.0
7.5
5.7
30.0
20.0
14.0
10.5
8.5
36.0
25.0
18.0
13.0
10.0
38.0
28.0
20.0
15.0
11.0
52.0
39.0
30.0
22.0
16.0
70.0
52.0
38.0
27.0
20.0
15.0
66.0
43.0
32.0
22.0
90.0
61.0
44.0
102.0
70.0
QTY
mm
v
20
0.036
18
0.048
16
0.060
14
0.075
12
0.105
11
0.120
10
0.135
.188
0.188
.250
0.250
.313
0.313
.375
0.375
.500
0.500
.625
0.625
.750
0.750
F
3.8
1.000 1.000
1.250 1.250
Force required per linear foot to bend mild steel with air bend dies. (Measured in tons.)
- 43 -
3.5
TONS/FT
b
ir
CODE NO.
DESCRIPTION
PRICE
NOTES
TERMS AND CONDITIONS
CREDIT/PAYMENT
All purchases are COD unless credit approved. If account is past due, Amada America, Inc. reserves the right to hold shipment or require COD
terms. Credit/Payment terms are Net 30 days from date of invoice. Past due accounts are subject to interest charges. No early payment or
cash discounts are allowed.
ORDERS
Minimum of $50.00. Please write your Amada America, Inc. customer account number on all purchase orders to speed processing. Also,
please specify machine model, material type and thickness.
F.O.B.
All orders are F.O.B. shipping point.
SPECIAL ORDERS
All special orders are non-cancelable, non-returnable, and non-refundable.
RETURNED MATERIAL
Accepted only with prior approval of Amada America, Inc.’s Tooling Department Manager. There will be a 25% re-stocking fee on all standard
items. All items must be returned unused and freight prepaid. No returns will be allowed beyond 30 days of original shipment.
DELIVERY
Delivery on special items will be established at time of order.
PURCHASE ORDER NUMBER
Purchase order number must accompany all telephone orders. Verbal orders will not be processed without a purchase order number.
DAMAGE OR SHORTAGE CLAIMS
All claims must be made within ten calendar days of receipt of tooling.
PRICING
All prices in this catalog are subject to change without notice. All prices provided by Amada America, Inc. in the form of a written quotation are
valid for thirty days following the date of the quote.
TOOLING ORDER PHONE: 800-588-6683 FAX: 800-423-7144
Amada America, Inc.
7025 Firestone Boulevard • Buena Park, CA 90621
TEL (800) 588-6683 • FAX (800) 423-7144
www.amada.com • e-mail: toolingdept@amada.com
©AMADA CO., Ltd. All Right Reserved.
M21-1-0708-A