GE Construction Sealant Brochure

Construction
Sealants
Sunlight Proof
Wa t e r P ro o f
Te m p e r a t u r e P r o o f
Ozone Proof
Alkali Proof
Acid Proof
What further Proof do you need?
MOMENTIVE PERFORMANCE MATERIALS formerly GE Advanced Materials
Momentive Performance Materials formerly GE Advanced Materials, GE Bayer Silicones and GE Toshiba Silicones is one of the
largest producer of Silicones and silicone derivatives and a global leader in development and manufacture of products derived from
quartz and specialty ceramic with more than 5000 employees worldwide.
Silicones Sealants are revolutionizing the technology of adhesion, opening up advanced design possibilities.
Silicones sealants are amazingly versatile. The excellent adhesion properties of silicones come from their chemical structure. This
allows them to bind together materials that were traditionally difficult to unite - such as glass, concrete, metals, various plastics,
glazed tiles and finished or unfinished wood
Momentive Performance Materials offers a broad range of highly effective, long lasting products, available in cartridges, foil packs,
pails and drums.
Today Momentive Performance Materials offers a wide range of versatile products that combine high quality with value-added
performance. These products are characterized by excellent weathering properties, movement capabilities, adhesion
performance, temperature resistance, elastic recovery, extrudable at various temperatures and UV resistance.
Silicone Sealants are much more than just stylish adhesive: they are a vital component of thousands of products, determining the
way materials can be used together. We have been working to bring its excellent materials to bear in various applications for over 40
years.
Momentive Performance Material
Construction Sealants
Silicone
Winsil 10
General purpose construction sealant
Momentive Performance Material ‘s Construction Sealant are
one part ready-to-use silicone sealant which cures with the
atmospheric moisture at room temperature to form a high
strength rubber seal. Due to its past like consistency they can
be applied on horizontal, vertical & overhead surfaces.
Momentive Performance Materials Construction Sealants
comes with the following properties that ave made them a
trusted name across the world.
ŸUV resistance
ŸWeathers Stability
ŸPrimerless Adhesion to most building Materials
ŸExcellent movement accommodation
ŸHeat Stability remain flexible in High and low temperature
extremes
ŸHeat aging- does not degrade after heat exposure
ŸVapour Premeable
ŸChoices of colours
Winsil 10 is an acetoxy cure, one part ready-to-use silicone
sealant, designed for cost effective, general purpose glazing
and sealing applications.
It has outstanding adhesion to non
porous surfaces such as glass,
glazed surfaces and metal. The
sealant’s short tooling time and fast
cure time ensure fast adhesion,
build-up and job completion
Applications
• Standard glazing
• Cap beading
• General sealing and assembly
Silicone
Silicone
Winsil 20
Silpruf
General purpose construction sealant
Construction and Glazing
Winsil 20 is a neutral cure, one part ready-to-use silicone
sealant which offers excellent adhesion to a wide variety of
porous substrates such as concrete, masonry, painted wood,
etc
Silpruf is a neutral cure, one part ready-to-use, low modulus
silicone sealant ideal for sealing expansion joints. Its long
tooling time ensure easy application and longer on the job
working time.
The Sealants medium
ensure that the sealant
accommodate a wide
today’s window and
design.
Its high movement accommodation
allows building joints to withstand
continuous expansion and
contraction at high and low
temperatures. It is also
recommended as a weather sealing
sealant in structural glazing
projects
modulus
bead will
range of
building
Applications
ŸPerimeter joint sealing of wood,
metal, UPVC and coated frames
ŸSealing of bathtubs, basins etc.
ŸCeramic tile sealing
ŸCurtain wall sealing- glass & metal
Silicone
Applications
ŸExpansion joint sealing
ŸWeather sealing in structural
glazing application
Silicone
Weathersil NY
Ultrapruf
Neutral cure, Low Odour & Non-Yellowing Construction Sealant
Highly Flexible Silicone Sealant
Weathersil NY is one part, low modulus Non yellowing silicone
sealant. The resulting rubber like seal exhibits high elasticity
and durability against sunlight, UV radiation, rain, snow and
temperature extremes.
Ultrapruf is a one part, neutral cure, low modulus silicone
sealant. It is unaffected by weathering conditions such as
sunlight UV radiation, rain and temperature extremes.
Weathersil NY is highly versatile
sealant for bonding and sealing
plastics such as polycarbonate,
PVC, FRP with other substrates
such as glass, metal, masonry and
other plastics.
Applications
ŸPerimeter and curtain wall
sealing.
ŸGlazing systems and cap
beading : glass, painted wood,
PVS, polycarbonate and many
other plastics
ŸInterior sealing applications
where a low odor is
advantageous during curing.
Its excellent weatherability and
high movement accommodation
enable the sealant to perform even
after many years of exposure. It is
therefore strongly recommended
as a weather sealing sealant in
structural glazing applications.
Applications
ŸExpansion joint sealing
ŸWeather sealing in structural
glazing application
Silicone
Silicone
Ultraglaze SSG4000
Ceramicsil
Structural Glazing Sealant
Sanitary and Tile Sealant
Ultraglaze SSG4000 structural glazing sealant is a neutral cure,
one part ready-to-use sealant designed for use specifically
where high strength is required.
Ceramicsil silicone is a one part, low modulus silicone sealants
which undergoes a neutral cure when exposed to atmospheric
moisture.
It provides the ultimate in design
flexibility, structural integrity and
service life for a critical structural
glazing applications, thus ensuring
a high margin of safety at a cost
effective price.
The resulting rubber like seal
exhibits high elasticity and
excellent durability. Ceramicsil has
good adhesion to most common
building materials such as: glass or
glazed surfaces, aluminum and
other metals, masonry, treated
wood, concrete, PVC and many
other plastics.
Applications
ŸStructural glazing
ŸWeather sealing in structural
glazing application
Silicone
Applications
ŸSanitary Applications
ŸConstruction
ŸJoint Sealing
ŸKitchen & Bathrom
Silicone
Ultraglaze SSG4400
Alusil
Structural Glazing Sealant(2-Part)
General Purpose Neutral Sealant
Ultraglaze SSG 4400 is a black two component, high
modulus, neutral cure silicone sealant specifically engineered
for in-shop structural glazing.
Alusil silicone is a one part, low modulus, fast cure silicone
sealant which undergoes a neutral cure when exposed to
atmospheric moisture.
It cures to form a high strength adhesive sealant. It provides
the ultimate in-design flexibility, structural integrity and service
life for structural glazing applications, thus ensuring a high
margin of safety at a cost effective price.
The resulting rubber like seal
exhibits high elasticity and
excellent durability against
sunlight, UV radiation, rain, snow
and temperature extremes.
Excellent adhesion to most
common building materials such
as: glass or glazed surfaces,
aluminium and other Coated
metals, masonry, treated wood,
concrete, PVC and many other
plastics.
Sealant that completely cures in 24 hours .
Applications
ŸStructural glazing
ŸWeather sealing in structural glazing application
ŸApplications
ŸGlazing
ŸConstruction
ŸJoint Sealing
Properties and Technical Data
Winsil 10
Winsil 20
Weathersil NY
Silpruf
Ultrapruf
Ultraglaze
SSG4000
Ultraglaze
SSG4400
Ceramicsil
Alusil
25%
25%
25%
50%
50%
25%
25%
25%
25%
25mm X 6mm
25mm X 6mm
25mm X 6mm
60mm X 10mm
60mm X 10mm
25mm X 10mm
25mm X 6mm
25mm X 6mm
10 min
10 min
10 min
3 min
30 min
30 min
45-60 min snaptime
based on mix ration
10 min
10 min
1 -5 days
1 - 5 days
1- 5 days
5 - 10 days
5- 10 days
7-14 days
1 day
1 - 5 days
1 - 5 days
18 shore A
25 shore A
26 shore A
20 Shore A
25 Shore A
37 Shore A
40 shore A
20 Shore A
20 Shore A
Inherent sealant strength,
higher tensile strength ideal
for structural glazing
applications
1.5 Mpa
1.5 Mpa
1.5 Mpa
1.6Mpa
1.5 Mpa
2.1 Mpa
2.1 Mpa
1.4 Mpa
1.7 Mpa
Substrate compatibility
decisions
Acetoxy
Neutral
Neutral
Neutral
Neutral
Neutral
Neutral
Neutral
Neutral
Wide choice based on
substrates
Translusent,
black, white
Grey and ivory
Black
Black
Black
Translusent,
black, white
Translusent, black,
white
Property Significance
Sealants ability to accomadate
the required design movement
Greater Design Flexibility
Time taken to forma a skin on
the surface of the bead
Time taken by sealant to
develop its full properties
Influences movment capability
and long term performance.
Translusent, Translusent, black, Black, Grey,white
black, white
white
Grey and ivory
Application Instructions
All surfaces to be sealed must be clean, dry and free of loose
materials. Use wire brush to remove laitence and other loose
materials from concrete. Do grease non porus surface with
solvent such as Methyl Ethyle Ketone(MEK), Iso Propyl
Alcohol(IPA), etc. The use of masking tape is recommended
where appropriate to ensure a neat appearance. Cut cartridge
thread, screw on nozzle, cut at 45 degreeto the desired bead
size. Press lever and pull follower rod plate of the claulking gun
and insert the cartridge into the gun. Extrude sealant firmly into
joint to ensure complete contact. Tool the sealant surface with a
spatula for a smooth finish. Remove the masking tape
immediately after tooling
Estimating Sealant Requirement
Depth
(mm)
10
width
12 15
2
3
4
5
8
2
3
75
50
50
33
37.5
25
30
20
19
13
20
25
30
40
60
15
10
12.5 10
8.3 6.7
7.5
5
6
4
5
3.3
3.8
2.5
2.5
1.7
4
37.5
25
18.8
15
9.4
7.5
6.3
5
3.8
3
2.5
1.9
1.3
5
6
30
25
20
17
15
12.5
12
10
7.5
6.3
6
5
5
4.2
4
3.3
3
2.5
2.4
2
2
1.7
1.5
1.3
1
0.8
8
18.8
13
9.4
7.5
4.7
3.8
3.1
2.5
1.9
1.5
1.3
0.9
0.6
10
15
10
7.5
6
3.8
3
2.5
2
1.5
1.2
1
0.8
0.5
Limitations
Silicone construction sealants are not recommended for underwater applications. Painting over the silicone sealant is is not
recommended.
Limited warrenty: Momentive Performance Materials warrants that it products would conform to Momentive Performance Materials
internal specifications at the time of application or use, provided the product is stored in accordance with Momentive Performance
Materials recommendation and applied before the earliest of (1) the ‘Use before date’ indicated on the product package. (2) One
year from the date of shipment, or (3) expiration of such other period or recommended storage time stated in the Momentive
performance Material literature for the product. If notified in writing of a claim within six months of the product use or application.
Momentive Performance Materials will, at its option, replace or refund the purchase price of any Momentive Performance Materials
which does not satisfy the forgoing warranty.
The foregoing shall constitute the sole and exclusive remedy for defects or failure in the product, at the sole and exclusive liability of
Momentive Performance Materials. The warranties stated above are in lieu of all other warranties, written or Oral, statutory express
or implied, including any warranties of merchant ability or fitness for purpose.
Limitation and Liability: Momentive performance Materials shall, in no event, whether the claim is based on warranty, contract, tort,
strict liability, negligence or otherwise, be liable for incidental or consequential damages, or for any damages in excess of the
amount of the purchase price.
INDIA HEAD OFFICE
The Millenia, Tower ‘B’’, 4th floor, Murphy Road,Ulsoor, Bangalore 560008
Phone: 080-41471840-44 Fax: 080-41471850, e-mail: silicones.response@momentive.com
Delhi Office
No. 4 & 5, First floor, Augusta Point,DLF Golf Course
Road, Sector 53, Gurgoan 120253, Haryana
Phone: 0124-4018033-34 Fax: 0124-4018035
Mumbai Office
B 501-502 Citipoint, Next to Kohinoor Continental Hotel,
J. B. Nagar, Andheri-Kurla Road, Mumbai 400059
Phone: 022-40059350-55 Fax: 022-40059356
LEGAL DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES OF GE SILICONES, GE BAYER SILICONES, GE TOSHIBA SILICONES, THEIR SUBSIDIARIES OR AFFILIATES (THE “SUPPLIER”), ARE SOLD SUBJECT TO THE SUPPLIER’S
STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN APPLICABLE SALES AGREEMENTS, PRINTED ON THE BACK OF ACKNOWLEDGMENTS AND INVOICES, OR AVAILABLE UPON REQUEST. ALTHOUGH THE
INFORMATION, RECOMMENDATIONS OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SUPPLIER MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (I) THAT THE RESULTS DESCRIBED
HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (II) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SUPPLIER’S MATERIALS, PRODUCTS, SERVICES, RECOMMENDATIONS
OR ADVICE. NOTHING IN THIS OR ANY OTHER DOCUMENT SHALL ALTER, VARY, SUPERSEDE OR OPERATE AS A WAIVER OF ANY OF THE SUPPLIER’S STANDARD CONDITIONS OF SALE
Each user bears the full responsibility for making its own determination as to the suitability of Supplier’s materials, products, services, recommendations or advice for its own particular purpose. Each user must identify
and perform tests and analyses sufficient to assure it that its finished parts will be safe and suitable for use under end-use conditions. Because actual use of products by the user is beyond the control of Supplier, such use
is within the exclusive responsibility of the user, and Supplier cannot be held responsible for any loss incurred through incorrect or faulty use of the products. Further, no statement contained herein concerning a possible
or suggested use of any material, product, service or design is intended or should be construed to grant any license under any patent or other intellectual property right of Supplier or any of its subsidiaries or affiliated
companies, or as a recommendation for the use of such material, product, service or design in the infringement of any patent or other intellectual property right.