a PDF brochure on the Deltrak

Transcription

a PDF brochure on the Deltrak
80
ye
(IR ars
US exp
e n er i
gin en
e e ce o
qu f m
ipm a
sin
en nufa
t)
ce
ctu
19
rin
28
g
Ov
er
DELTRAK 2.0
The history of IRUS
1865
J. Rilling founded a manufacturing company of mills in Dusslingen.
Flour mills and large coffee grinders are sold all over the world.
1928
The world's first bar mower type HM is being developed by IRUS and
received a patent in the same year.
IRUS began with the engine equipment manufacturing.
1953
HM
IRUS led the single-axle U 600 in the agricultural industry;
in subsequent years, the types U 300, U 900 and U 1200 with
ZF transmissions are built for universal use.
1968
Micky
The most successful of IRUS mowers is the famous "MICKY".
With this machine IRUS succeeds in developing a hitherto unknown
small and lightweight mower.
That same year producing 10,000 units of the Micky at Dusslingen.
1985
IRUS passes into new ownership.
The product line is adapted to the current needs of customers
1986
IRUS is presenting a world first - a sickle bar mower with a differential
lock, steering brakes and low-pressure tires “Terra” - the KM 300.
KM 300
2003
Start of production of a new generation of hydrostatic tool carriers.
The HYTRAK marks a new era. On the exhibition “Demopark” in Fulda
IRUS presented the KOMTRAK 25, the first radio-controlled machine and
awarded a medal for innovation.
2004
With the KOMTRAK IRUS presents the strongest single axle tractor in the
world .
KOMTRAK
2005
Launch of DELTRAK, the first radio-controlled flail mower with caterpillar
drive.
2008
DELTRAK
IRUS celebrates 80 years of motorized equipment construction.
Innovation and quality for decades!
IRUS DELTRAK 2.0
DELTRAK 2.0 with a
flail mower mowing
of scrub and foliage
on a steep slope.
The radio-controlled carrier DELTRAK 2.0 is the clear leader when it comes to
mowing inaccessible steep terrain, soft terrain and areas that present operational
hazards to bystanders or highway traffic.
The DELTRAK 2.0 is a commercial product that is designed with safety and
precision. Pure German technology from a company that has a deep, 83 year
engineering background.
The traction unit has a multitude of attachments that ensures maximum utilization
after the purchase.
DELTRAK 2.0 with
the flail mower on
an embankment
mowing.
IRUS DELTRAK 2.0
Deltrak 2.0 can be heli lifted into inaccessible country for fuel reduction
necessary for safe back-burning and for reduction of fuel in bushfire prone
areas.
The DELTRAK 2.0 allows many benefits over other obsolete and
unsafe methods of sloping terrain maintenance.
Benefits!

Significant cost savings:
DELTRAK 2.0 reduces maintenance
costs by up to 80% when compared
to hand held products such as
brush-cutters and walk behind
machines.
At 71 hp per inch of cut, the
machine has huge power reserves to
cover large areas of terrain that
would stall all other modes of
cutting. Sticks, branches, shrubs
and long grass are all mulched
safely by DELTRAK 2.0.
Ground coverage can exceed 10,000
square meters per hour on even and
unobstructed grounds.

Maximum Security:
The operator is located outside the
danger zone. Flail mower is safe when
thrown objects are considered. All
objects are processed into the ground
behind the mower. Lower thrown
object risk.

Maintaining the health of the
Operator:
No mountaineering, no slipping, no
hanging on branches, thorns and
scrub, no vibration on hands, no
exhaust fumes in the immediate
vicinity, no stress of joints. In tropical
areas, venomous hazards are not an
issue.
IRUS DELTRAK 2.0
When working with the
2 stage snow blower,
e.g. avalanche areas
can be cleared and
slippery surfaces
processed without risk.
Stumpgrinder:
Removing, roots, snags
and rhizomes. Operator
can be a safe distance
away on inaccessible or
steep slopes.
If the grass must be
mowed, but no rotating
cutting systems may be
used, the front mower is
the ideal solution for this.
IRUS DELTRAK 2.0
Technical data:
Engine:
(B&S Vanguard) - Daihatsu 3-cylinder turbo-diesel engine 25.4 kW
(35.0 HP), liquid cooled, electric start, hour meter, oil, and temp controllers
Drive:
hydraulic crawler tracks with direct drive, proportional speed control of
crawler drive on the radio control, forward and backward, trim control
allows easy straight tracking on steep slopes.
Speeds:
0 - 10 km/h
reverse: 0 - 10 km/h
maximum speed, via infinitely variable cruise control on the multi function
remote.
Track width:
1100 - 1250 mm (infinitely adjustable)
Centre of gravity: diesel engine is 63cm (24.8”) high, width of tracks 1250 max.
Max. slope:
50° | 120%
Radio range:
approx. 200-300 m (line of sight)
Standard drive:
Features:
-
drive / steer (continuously, proportional)
Engine start / engine stop
infinitely variable control of engine speed
DELTRONIC electronic monitoring system, continuous monitoring of
all fluids, fuel, hydraulic oil, engine oil and engine coolant
- remote PTO engagement
- front attachment lift and lowering
Optional features: - control of auxiliary hydraulic cylinders
- control of additional electric cylinders
Total weight:
approx. 690 kg (base machine incl. crawler chassis) add attachments
Ground Pressure: 2 PSI ( dependant on track setup )
Multi award winner at
numerous European
national and
international trade
fairs:
IRUS DELTRAK 2.0
Optional equipment:
- Tapered 50 mm track spikes
- Transport rubbers for spikes
- Front and rear work lights
- Rotating beacon
- Additional hydraulic connections
- Additional electrical connections
- Valve to control the lowering speed
- Lifting sling frame and perimeter bar
- Recovery kit, winch, plasma rope
(only available for Australia)
- Helicopter sling kit (certified)
(only available for Australia)
IRUS DELTRAK 2.0
Radio control:
The most important part of DELTRAK 2.0 is the
radio control system. Equipped with two large
joysticks for easy driving and steering, as well as
various additional switches to control other
machine functions. 18 controls in total.
Full hydraulic drive
(no belts, chains, clutches):
The full hydraulic drive of DELTRAK 2.0 consists of
3 high quality axial piston pumps. 1 gear pump.
The DELTRAK has 2 very large oil coolers to
increase the efficiency and protection of the
hydraulic components. Twin cooling fans fitted.
Zero gravity engine articulation:
To protect the engine, the engine has 155 mm of
oil under the level mark (deep sump).
The auto engine tilt system ensures that the
engine oil supply is protected at all times.
Watchdog system is fitted, early warning device.
Hydraulic connections:
The interface between DELTRAK 2.0 and
attachment are hydraulic. Screw couplings are
used here to avoid against unintentional
disconnection. High flow hydraulic hoses & motor
ensures adequate power to attachments.
Hydraulic front attachment mount:
All attachments fitted to DELTRAK 2.0 are
mounted on a quick hitch system, self centering,
this ensure easy attachment changes. Counter
balance system is fitted.
IRUS DELTRAK 2.0
Maintenance / cleaning:
The panels of DELTRAK 2.0 can simply be opened
for the cleaning and maintenance of all
components. Swing up oil coolers allow access to
both suction and pusher electric fans. The twin
coolers are robust solid aluminium for durability.
Diesel engine:
The drive of DELTRAK 2.0 is a very light and robust
3-cylinder turbo-diesel engine with water cooling .
The B&S (Daihatsu) industrial motor is designed for
use under harsh conditions. Fuel filter monitor is
included.
Twin tracks:
The robust crawler chassis has direct hydraulic
drives with high sprocket design, free running and
optimally arranged rollers on the side guides of
track. The IRUS tracks can be used smooth, with
replaceable metal cleats and optional spikes.
# 3 modes for all terrain applications #
Attachments
Flail mulcher (2 models):
- Working width: 1050 mm or 1250 mm
- Cutting height adjustment of trailing roller
and/or lateral skids
- Axial piston motor and triple v-belt drive
- Blades
three different blades available:
- Y-blade: 36 blades / 42 blades
- Delta-blade: 18 blades / 21 blades
- Hammer flail: 18 hammers / 21 hammers
- Weight: 110 kg / 120 kg
- for extensive landscaping, level cutting
- to cut grass, scrub and foliage up to 50 mm
- heavy duty high speed rotor shaft on both
models
Rotary disc mower, timed blades:
- Working width: 1300 mm or 1660 mm
- Number of discs: 3 or 4
- Number of blades: 2 blades per disc
- central passage of cut material wide drop
- lighter and more stable aluminum frame of
bridge
- direct hydraulic drive hydraulic motor
- easy access for cleaning, maintenance, and
blade change via hinged panels
- detachable cage protection when
transporting
- Weight: 140 kg / 160 kg
- to cut grass, preferably if mulch is not
required/prohibited and/or if the grass
should be required for the production of
feed.
Attachments
Front mower:
- Double reciprocating blade Bidux-system
- working width:
1150 mm / 1500 mm / 1900 mm
- cutting from front, tiltable
- Mower can cut on steep slopes and stream
courses to +/-weight 80° tilted up and
down
- Standard impact protection
- Depending on the bar width: 130-160 kg
Attachments
Front debris/ belt rake:
- working width: 1450 mm
- 2 leading wheels to the height adjustment
- Pivot mounted haying machine for better
ground following
- Weight: 135 kg
Stone burrier, tiller:
- Working width: 1000 mm
- Trencher teeth: 14 piece (as standard)
max up to 28
- large passage to prevent blockage and
deadlock by stones
- Working depth adjustment via crank
- Mesh roller
- hydraulic drive hydraulic motor and duplex
roller chains
- Weight: 137 kg
- for use in creating seed beds in stony
areas, hides stone and pebble, but also for
digging loose soil
Attachments
Snow and soil blade:
- Working width: 1250 mm / 1500 mm
- Lift height: up to 400 mm
- Rubber cutting edge for concrete /
asphalt areas (removable)
- Hydraulic slew, left and right
(extra remote kit required )
- Weight: 70 kg / 80 kg
Zaugg snow blower:
- Manufacturer: Zaugg AG Eggiwil (CH)
- working width: 1000 mm
- Height: 700 mm
- Hydraulically rotating discharge
- Electric throwing adjustment
- suitable for soft, hard, and wet
- extremely robust construction
- Weight: 238 kg
Attachments with Adaptor Coupling
Adaptor Coupling:
- for the propulsion of IRUS implements with
Ø 65 mm nozzle and 3 claws profile
- Hydraulic drive gear motor and spur gears
- Connection of the attachments of IRUS
system
- Support pressure reduction and tilt
adjustment
- Weight: 39 kg
Sweeper:
- Working width: 1300 mm
- central drive between the brushes
- Height adjustment via swivel wheels
- Hydraulic slew, left and right
- Roller diameter 400 mm
- available with differing brushes:
- Dirt placing brushes, 16 rows
- Universal Sweeper brush 12-row
- Snow Sweeper brush, 8-rows
- Weight with brushes: 52 kg
- optional equipment:
- Hopper
- Mudguard
- Crank adjustment of swivel wheels
Attachments with Adaptor Coupling
Weed Brush:
- Working width: 1000 mm
- Tilt the brush rotor
- Round wire bundles and plastic bundle
available
- Weight: approx. 100 kg
- for weed removal on hard or soft surfaces
Power Harrow:
- Working width: 1100 mm / 1300 mm
- complete drive cone plate wheel and
cylindrical gear in an oil bath
- circular Tine
- Working depth adjustment of mesh roller
and crank
- adjustable blade
- Weight: 118 kg / 137 kg
Rotary weeder:
- Working width: 1400 mm
- Low-vibration operation , two opposing
rotors
- Drive on cone plate of control and export
center crank
- Working depth adjustment via cookie roller
or supporting plate
- Weight: 103 kg
Other IRUS motor unit program:
QUATRAK
Kommunal
Balkenmäher
Universal-Einachser
2007
2007
2007
QUATRAK
Hydrostatic
Field Mower
Single Axle
oto
rg
er
ät
eb
M
19
28
r7
5J
ah
re
IR
US
üb
e
sei
t
M
ah
re
IR
US
19
28
sei
t
üb
er
75
J
Technical changes in the interest of progress.
IRUS Motorgeräte GmbH
Häuslerwasen 3 · D-72393 Burladingen-Salmendingen
Telefon: +49(0)7126/928949-0 · Telefax: 928949-99
Email: info@irus.de · Internet: http://www.irus.de/
au
au
oto
rg
er
ät
eb
M
oto
rg
er
ät
eb
au
19
28
75
Ja
hr
eI
RU
S
üb
er
sei
t
M
oto
19
28
Ja
hr
eI
RU
S
0
r8
üb
e
seit
· Extrem steil
· Extrem bodenschonend
· Extrem sicher
· Ferngesteuert
rg
er
ät
eb
au
Mähen in neuer DIMENSION: