lubri-loy® lubri-loy - Lubri

LUBRI-LOY®®
2010-2011
PRODUCT CATALOG
Delivering the highest-quality,
most technologically-advanced
lubrication solutions.
EXCLUSIVELY
EXCLUSIVELY IN
IN
LUBRI-LOY
LUBRI-LOY®®
SINCE
SINCE 1949
1949
LUBRI-LOY®
SINCE 1949
LUBRI-LOY HISTORY
Since 1949, Lubri-Loy has offered end users and distributors the most technologically-advanced, highest-quality premium
lubrication products at economical prices.
Equipment is expensive and your investment deserves to be protected. By properly lubricating equipment through the
correct applications, you fight friction – resulting in overall lubricity and efficiency. This is our primary aim at Lubri-Loy.
Our products are designed for use under a variety of conditions – from adverse and extreme situations to very basic
daily, ongoing maintenance. Lubri-Loy can lower operating costs, decrease lubrication cycles, maximize efficiency of
equipment, and reduce maintenance downtime.
We use only premium, top-tier chemicals and the most-advanced methods to develop, blend and manufacture each of
our products. Our convenient location in Missouri enables us to offer shipping cost advantages nationwide.
CUSTOMER TECHNICAL SUPPORT
Our staff of experts can assist with questions regarding applications as well as technical issues. Product data and
MSDS information is available upon request through each of the following options:
Please call: 636-561-5007
To send a request via fax: 636-561-5006
To send a request via e-mail: customerservice@lubriloy.com
DISTRIBUTION
We offer exclusive industrial distribution through the leading MRO distributor in North America, Motion Industries. The
company has more than 500 operations including nine distribution centers, strategically-located repair centers and
serves more than 116,000 customers. Motion Industries offers a knowledgeable staff of salespeople, excellent
inventories and prompt delivery service.
STRATEGIC PRODUCT LINE
Our product line was strategically developed to eliminate confusion and create consolidation of inventory – by
stopping duplication. We offer interchange products for 95% of aerosols, greases and bulk oils – eliminating the need
to carry excessive SKUs of similar products. At Lubri-Loy, we believe that other companies are marketing many different offerings that can all be used for the same application.
SINGLE SOURCE SUPPLY
Our single-source inventory concept allows distributors and end users to use one supply partner to meet all of their
lubrication needs – rather than purchasing excessive amounts of confusing and unused inventory.
REGULATIONS AND COMPLIANCE
Many products and manufacturers require certification to ensure that the highest-quality standards and criteria are met
for public safety and health reasons. This is most evident in the Food Processing Industry. By working directly with NSF
International, we ensure that our products maintain the proper registration and seal of approval from this globally
recognized agency. Please go to www.nsf.org to search our listings.
Our drum removal services are contracted with DOT and EPA-certified companies.
DEVELOPMENT AND TECHNOLOGY
Our products offer the latest technology to the user. We are constantly looking for ways to improve our line of
offerings and ensure that our customers receive the most technologically-advanced lubrication solutions.
Phone 636•561•5007 • Fax 636•561•5006
INDEX
LUBRI-LOY®
SINCE 1949
TABLE OF CONTENTS
Food Grade H1 Aerosols and Spray Lubricants ......................................................................2
General Purpose Aerosols and Cleaners ..............................................................................3-4
Food Grade H1 High Performance Greases, Gel and Paste ......................................................5
High Performance Greases....................................................................................................6
Specialty Grease..................................................................................................................7
Bulk Fluids – Synthetic Gear, Mineral Gear and Hydraulic ........................................................8
Bulk Fluids – Food Grade H1 Gear, Hydraulic and Synthetic ....................................................9
Bulk Fluids – Compressor, Pump and Turbine ........................................................................10
Bulk Fluids – Air Line and Technical Grade White Oils............................................................11
Bulk Fluids – Engineered Class Chain Oils & Specialty Fluids ..................................................12
Bulk Fluids – Automotive and ATF ........................................................................................13
Bulk Fluids – Automotive Gear and Monograde Engine Oils ....................................................14
Specialty Fluids ..................................................................................................................15
Specialty Products – Cutting Fluids........................................................................................16
➡
➡
➡
➡
➡
➡
1
Phone 636•561•5007 • Fax 636•561•5006
1
AEROSOLS AND SPRAY LUBRICANTS - FOOD GRADE
EXTREME
PENETRATING OIL,
CHAIN & CABLE FLUID
Food Grade, H1
This NSF-certified penetrating oil offers all the powerful benefits of our signature penetrating oil with
the added advantage of being registered as food
grade.
H1, Registration No. 138771 Aerosol
H1, Registration No. 139610 Bulk
Catalog No.
7011
7641
77041
Net Wt.
MINO Code
12 oz. (340 g)
5 gal. (18 L)
55 gal. (208 L)
09355X56321
09355X10054
09355X50139
SUPER SILICONE
WET MIST
Food Grade, H1
IMPACT-FG
Food Grade, H1
This NSF-certified aerosol grease provides all the
benefits of our IMPACT-FG grease but in a tenacious
aerosol form. This high-temperature, high performance grease will not wash out and leaves a very
thick, long-lasting coating of white lubrication.
This NSF-certified silicone spray offers a high delivery, water-like mist that leaves a long-lasting, odorless film. It is food grade and excellent for a wide
variety of applications in food processing facilities.
H1, Registration No. 138908
Catalog No.
9011
Net Wt.
MINO Code
11 oz. (311 g)
09355X12542
H1, Registration No. 138878
Catalog No.
14019
Net Wt.
MINO Code
9 oz. (255 g)
09355X10046
SYNTHETIC SPRAY
GREASE
Food Grade, H1
This NSF-certified synthetic aerosol grease is specifically designed to meet the demands and needs of
today's modern, food-processing facilities by offering superior extreme pressure and anti-wear properties combined with extreme temperature
capabilities from -80°F to + 600°F. Resistant to corrosion, oxidation and water wash out, this allows
for longer lubrication cycles and equipment life.
SUPER SILICONE
DRY MIST
Food Grade, H1
This NSF-certified silicone release agent provides a
superior, lubricating dry film void of residue that is
suitable in a wide variety of maintenance applications where increased lubricity is required. It prevents rust with a thin layer of lubrication and is heat
stable under adverse conditions.
H1, Registration No. 138909
Catalog No.
9009
Net Wt.
MINO Code
9 oz. (255 g)
09355X00102
H1, Registration No. 138694
Catalog No.
14014
2
Net Wt.
MINO Code
9 oz. (255 g)
09355X10048
Phone 636•561•5007 • Fax 636•561•5006
AEROSOLS AND SPRAY LUBRICANTS
EXTREME
PENETRATING OIL,
CHAIN & CABLE FLUID
Powered by Revive
This low-odor, superior penetrating oil is designed
for a variety of situations - from the most common to
the most difficult maintenance applications wherever
lubrication is necessary. It provides extremely fast
penetration, displaces moisture and leaves a protective coating that prevents rusting and corrosion. It
has a very high capillary action.
Catalog No.
7004
7012
7640
77040
W
NE
SYNTHETIC
FOOD GRADE
H1 BELT DRESSING
Catalog No.
8013
Net Wt.
MINO Code
10 oz. (284 g)
09355X10062
MINO Code
09355X10032
09355X10033
09355X10037
09355X10038
LUBRI-CLEAN TRI-FREE
NON-CHLORINATED CLEANER AND
DEGREASER
Synthetic Food Grade H1 Belt Dressing is a tacky,
non-drying film that extends belt and pulley bearing
life by reducing slippage, hardening, glazing, dirt
build-up and friction. It will also improve operating
efficiency by reducing belt tension on motors, shafts
and wheels. It is water resistant and colorless and
will not stain leather, rubber, canvas or fabric – and
is suited for flat, round and v-belts on conveyor systems.
NSF H1, Registration Pending
Net Wt.
4.5 oz. (113 g)
12 oz. (340 g)
5 gal. (18 L)
55 gal. (208 L)
This industrial strength cleaner and degreaser is
non-chlorinated and quick drying leaving no leftover residue. It is an excellent alternative to 1, 1,
1 and chlorinated solvent products. It is safe on
most plastics and surfaces. It will handle a wide
range of cleaning and degreasing applications –
including metal parts where there is residual
grease and soil.
Catalog No.
16020TF
Net Wt.
MINO Code
14 oz. (397 g)
09355X10064
LUBRI-CLEAN
HIGH-PERFORMANCE,
NON-FLAMMABLE CLEANER
AND DEGREASER
This dynamic non-flammable cleaner and degreaser
is industrially-rated and multi-dimensional providing
an array of benefits all in one premium formula. It
eliminates the need for numerous cleaning products
by offering a diversified, all-in-one formulation that
also performs as an electrical contact cleaner. It has
high dielectric strength and is safe on most plastics.
Catalog No.
16020
16640
167040
Net Wt.
16 oz. (453 g)
5 gal. (18 L)
55 gal. (208 L)
Phone 636•561•5007 • Fax 636•561•5006
MINO Code
3
09355X10047
09355X50093
09355X50106
3
AEROSOLS AND SPRAY LUBRICANTS - NON FOOD GRADE
LUBRI-MOLY DRY FILM
This non-conductive lubricant penetrates pores of
substrates and bonds to surfaces for long-term lubrication. It provides a high-pressure, high-solids
molybdenum disulfide coating and will withstand up
to 50,000 psi. It was designed for assembly and
run-in lubrication, automotive as well as industrial
gaskets, sliding surfaces and gears, chutes and bins,
bearings, chain drives, intricate mechanisms, roller
chains and conveyor belts wherever heat is present.
Catalog No.
10018
Net Wt.
MINO Code
12 oz. (340 g)
09355X50094
SUPER SILICONE
RELEASE AGENT
Water-Based
LUBRI-GEL
Pressurized Penetrating Gel with
TEFLON
This water-based lubricating and emulsifying agent
provides a dramatic, high-dispersion spray pattern
that is suitable in a variety of applications, especially
those in the packaging industry. It rapidly amplifies
the reduction of friction while providing a non-drying, long-lasting, colorless, odorless film.
This high pressure penetrating lubricant dispenses
like a penetrating oil but then quickly establishes a
grease-like, tacky, tenacious coating to provide longlasting protection and lubrication.
Catalog No.
15016
4
Net Wt.
MINO Code
Catalog No.
11 oz. (312 g)
09355X10045
14013
14640
147040
Net Wt.
MINO Code
12 oz. (340 g)
5 gal. (18 L)
55 gal. (208 L)
09355X50001
09355X10040
09355X10042
Phone 636•561•5007 • Fax 636•561•5006
HIGH PERFORMANCE GREASES, GEL & PASTE - FOOD GRADE
LUBRI-SYN #21
Food Grade, H1, Synthetic
This NLGI #2, NSF-certified food grade grease
maintains a wide operating temperature range with
the ability, especially as it relates to colder temperatures, to withstand -80F to 400°F. It is designed
for a variety of food processing and machinery applications, including valves and bearings. It will resist mildew and fungal growth and contains
excellent long life and antirust properties. It is impervious to washout.
H1, Registration No. 139231
Catalog No.
LS-21014
LS-21640
LS-21192
H1, Registration No. 141692
9004
H1, Registration No. 142270
Net Wt.
MINO Code
Catalog No.
14 oz. (397 g)
09355X50185
LS-93014
Net Wt.
MINO Code
16 oz. (454 g)
09355X10097
LUBRI-SEAL ASSEMBLY
GEL, SYNTHETIC
Food Grade, H1 Assembly Lubricant
ANTI-SEIZE STAINLESS
STEEL PASTE
Food Grade, H1
This synthetic assembly and lubricating gel is clear,
tasteless and odorless. Temperature range of -20° F
to +350° F, resistant to water washout, commercial
detergents, CIP & COP solutions will remove it for a
clean and sanitary surface. Will not dry out, gum
on equipment, separate or bleed. Compatible with
most O-rings, seals and elastomeric materials. Approved by USDA for use in all federally inspected
meat, poultry and food processing plants.
This H1-rated stainless steel paste, prevents galling,
is metal free and designed for the assembly, repair
and replacement process. It is a preventative maintenance tool with a high operating range of -40°F to
+350°F.
H1, Registration No. 139643
Catalog No.
09355X50008
09355X97102
09355X97176
This extremely tacky pure white NLGI #2, NSF-certified food grade grease maintains a wide operating
temperature range with the ability, especially as it
relates to colder temperatures, to withstand -80F to
400°F. It is impervious to water washout and designed for a variety of food processing and machinery applications, including valves and bearings. For
a Food Grade H1 level grease, it maintains a high
amount of EP capability.
This Synthetic NLGI #2, NSF-certified food grade
grease has been formulated with highly specialized
additive packages. It has high-temperature capability and is very solvent-resistant, including Hexane.
It can be used for the lubrication of gears and bearings including cam followers. It is biodegradable.
LS-21014E
MINO Code
LUBRI-SYN #93
Food Grade H1, Synthetic
LUBRI-SYN EXTREME
Food Grade, H1, Synthetic
Solvent Resistant
Catalog No.
Net Wt.
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
Net Wt.
MINO Code
4 oz. (113 g)
09355X50004
H1, Registration No. 142269
Catalog No.
9008
Net Wt.
MINO Code
8 oz. (226 g)
09355X50005
5
For a variety of grease products,
Lubri-Loy offers additional NLGI grades that are available on request.
Phone 636•561•5007 • Fax 636•561•5006
5
HIGH PERFORMANCE GREASES
W
NEIMPACT-FG
CSC
Food Grade, H1
This premium mineral-based calcium sufonate complex grease NLGI #2 that is registered Food Grade
H1. It excels in applications where resistance to
water washout and broad operating temperatures
are absolutely necessary. The formulation of this
product provides unsurpassed resistance to extreme
pressures and corrosion, including salt spray. Impact
FG-CSC also has exceptional mechanical stability
even in the presence of water. It contains no heavy
metals or other environmentally undesirable additives. It has an operating range of -40°F to +400°F
once in the application.
NSF H1, Registration Pending
Catalog No.
9014CSC
9640CSC
9192CSC
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
09355X65844
09355X10109
09355X10110
IMPACT-G
Synthetic Open Gear Lube
This synthetic blend is ideal for difficult situations including those requiring heavy duty and extreme
tacky applications. This viscous lubricant film will
not harden, chip or flake and will resist hard-pack
buildup in the roots of the gear teeth or wire rope.
Its extreme adhesive properties prevent slinging.
IMPACT-FG
Food Grade, H1, Aluminum Complex
This NLGI #2, NSF-certified white grease is extremely water resistant with excellent adhesive
strength to withstand frequent wash downs. It maintains extreme pressure and antiwear characteristics
with an outstanding H1-product temperature range
of -5°F to +450°F.
H1, Registration No. 141320
Catalog No.
IG-011
Net Wt.
MINO Code
11 oz. (311 g)
09355X10049
Caulking Tube
Catalog No.
9014
9640
9192
97040
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
55 gal. (208 L)
09355X10024
09355X10025
09355X10026
09355X10027
IG-640
This is a premium versatile lithium complex grease
with a wide operating temperature range. It will
maintain high film strength and exhibits excellent EP
and anti-wear properties in a variety of applications.
This Synthetic NLGI #2, NSF-certified food grade
grease contains a non-melting thickener and will not
washout. It is designed for bearings and slides. It
has high-temperature capability and provides corrosion protection for ferrous and non-ferrous metals. It
has been fortified with extreme pressure and antiwear additives for highly loaded applications.
LS-21014C
6
09355X10050
LUBRI-LITH LG, #2
Red Premium Lithium Complex
LUBRI-SYN CLEAR
Food Grade H1, Synthetic Clear
Catalog No.
5 gal. (18 L)
H1, Registration No. 141806
Catalog No.
Net Wt.
MINO Code
14 oz. (397 g)
09355X50186
2014L
2640L
2192L
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
09355X10055
09355X10056
09355X10057
Phone 636•561•5007 • Fax 636•561•5006
SPECIALTY GREASE
IMPACT #2
Powered by Revive
This bentone-based NLGI #2 extreme pressure, high
temperature grease contains our superior oil fortifier, Revive. It is a versatile, antiwear grease specifically designed for heavy duty equipment including
a variety of bearings, motors, couplings and conveyors. It will not washout and maintains an operating temperature range of -40°F to +550°F
Catalog No.
2014
2640
2192
27040
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
55 gal. (208 L)
09355X10013
09355X10015
09355X10014
09355X50000
LUBRI-POLY EP, #2
Polyurea-Based Lubrication for
Electric Motor Bearings
This is a non-soap, polyurea-thickened grease formulated with high-quality raw materials. It provides
excellent protection for electric motor bearings as
well as steering gears and C-V joints.
LUBRI-SYN #9
Synthetic Hydrocarbon Grease
Catalog No.
2014P
2640P
2192P
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
09355X10058
09355X10059
09355X10060
This is a multi-purpose, NLGI #2 synthetic grease
with a wide operating temperature from -80°F to
400°F. It has excellent wear and anti-seize properties, and long life. It is highly recommended for
roller chains, gears, bearing and cables and is able
to operate in wet environments.
W
NELUBRI-LITH
SYN M
Extreme Pressure/Anti-Wear,
Anti-Corrosion and
Anti-Oxidant Additives
This premium synthetic lithium complex with Moly
NLGI # 2 formulated in synthetic oils and fortified
with finest quality molybdenum disulphide. This
grease is also embodied with extreme pressure/antiwear, anti-corrosion and anti-oxidant additives to enhance its performance for severe operating
conditions. It will possess comparatively more life
than typical mineral oil based greases and will operate over a wide temperature range from -40°F to
+390°F.
Catalog No.
2014LSM
2640LSM
2192LSM
Net Wt.
MINO Code
14 oz. (397 g)
5 gal. (18 L)
120 lb. (54 kg)
09355X10101
09355X10106
09355X10107
Catalog No.
LS-9014
Net Wt.
MINO Code
14 oz. (397 g)
09355X50007
Phone 636•561•5007 • Fax 636•561•5006
7
BULK FLUIDS – Mineral and Synthetic Based
INDUSTRIAL EP SYNTHETIC
GEAR OIL
(ISOs 100, 150, 220, 320, 460, 680)
This synthetic extreme pressure (EP) industrial gear oil is for use in enclosed spur, bevel, herringbone, helical, and chain drive gear boxes
and other applications that require an AGMA EP or AGMA S gear oil.
They are formulated to outperform petroleum EP gear oils and provide
excellent gear and bearing protection in extreme hot and cold temperatures as well as heavily loaded environments.
Catalog No.
GOS-100-640
GOS-100
GOS-150-640
GOS-150
GOS-220-640
GOS-220
GOS-320-640
GOS-320
GOS-460-640
GOS-460
GOS-680-640
GOS-680
Net Wt.
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
L)
09355X50069
09355X50016
09355X50070
09355X50017
09355X50071
09355X50018
09355X50072
09355X50019
09355X50073
09355X50020
09355X50074
09355X50021
AW HYDRAULIC OIL
(ISOs 15, 22, 32, 46, 68, 100, 150)
INDUSTRIAL EP GEAR OIL
(ISOs 100, 150, 220, 320, 460, 680)
EP Gear Oils 100 through 680 have excellent oxidation and thermal
stability allowing them to resist thickening produced by high temperatures. Non-corrosive to gear and bearing materials such as steel, copper, bronze, Babbitt, and cadmium-nickel; these oils provide superior
foam resistance and water separation. The low pour points of the lower
viscosity grades make them suitable for gears and bearings exposed to
winter weather. EP Gear Oils excel in the lubrication of heavily loaded
enclosed gear drives and reducers on drives of all sizes. EP Gear Oils
lubricate a variety of gears including spur, bevel, helical, herringbone,
and worm designs.
Catalog No.
GO-100-640
GO-100
GO-150-640
GO-150
GO-220-640
GO-220
GO-320-640
GO-320
GO-460-640
GO-460
GO-680-640
GO-680
8
Net Wt.
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
L)
09355X50057
09355X50024
09355X50058
09355X50025
09355X50059
09355X50026
09355X50060
09355X50027
09355X50061
09355X50028
09355X50062
09355X50063
AW Hydraulic Fluids are superior, anti-wear hydraulic and circulating
fluids specially formulated with high quality base stocks and improved
thermally stable high zinc additives. These oils offer outstanding resistance to sludge formation, are chemically stable, and exhibit excellent
anti-wear properties. They also contain anti-foam agents to limit air entrainment in hydraulic systems, and demulsifiers to separate water from
the oil in the sump.
Catalog No.
Net Wt.
HFAW-015-640
HFAW-015
HFAW-022-640
HFAW-022
HFAW-032-640
HFAW-032
HFAW-046-640
HFAW-046
HFAW-046-B
HFAW-068-640
HFAW-068
HFAW-100-640
HFAW-100
HFAW-150-640
HFAW-150
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
BULK
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
Phone 636•561•5007 • Fax 636•561•5006
MINO Code
L)
L)
L)
L)
L)
L)
L)
09355X50190
09355X50189
09355X50076
09355X50034
09355X50077
09355X50035
09355X50078
09355X50036
09355X97105
09355X50079
09355X50037
09355X50080
09355X50038
09355X50081
09355X50039
BULK FLUIDS – Mineral and Synthetic Based
SYNTHETIC HYDRAULIC FLUID
FOOD GRADE MACHINERY OIL, H1
8,000 HOUR
(ISOs 22, 32, 46, 68, 100)
These NSF-certified H1 synthetic, food grade anti-wear oils have been
formulated to meet a variety of demanding applications where it may
be required or specified to use a synthetic in place of a standard white
mineral oil-based product. These polyalphaolefin (PAO) based synthetics may be recommended for rotary screw, rotary vane and reciprocating air compressors. They are excellent lubricants for hydraulic systems,
pumps, motors, bearings, chains and airline lubricators. These fluids
are all clean, zinc-free and offer exceptional water-separation characteristics – and will ensure stability over a longer service life. All viscosity grades are appropriate for use in facilities where incidental contact
with the edible product may occur.
GEAR OIL FOOD GRADE
MACHINERY, H1, MINERAL
(ISOs 68, 150, 220, 320, 460)
This NSF-certified, H1 gear oil features extreme pressure additives and
antifoam agents to reduce gear damage due to air entrainment. Oxidation and stability tests show greater than 8000 hours to 2.0 Acid
Number. All grades pass ASTM D-665A Water Rust Test and ASTM D665B Synthetic Sea Water Rust Test.
H1, Registration No. 150 #142245, No. 220 #140213,
No. 320 #142246, No. 460 #142247
Catalog No.
Net Wt.
GOH1-068-640
GOH1-068
GOH1-150-640
GOH1-150
GOH1-220-640
GOH1-220
GOH1-320-640
GOH1-320
GOH1-460-640
GOH1-460
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
09355X50064
09355X50029
09355X50065
09355X50030
09355X50066
09355X50031
09355X50067
09355X50032
09355X50068
09355X50033
HYDRAULIC FLUID FOOD GRADE
MACHINERY OIL, H1, MINERAL
(ISOs 22, 32, 46, 68, 100)
This NSF-certified, H1 hydraulic fluid is designed for use in most piston,
vane and gear pumps of hydraulic, bearing and circulating systems. It
is colorless and odorless. Oxidation and stability tests show greater
than 8000 hours to 2.0 Acid Number. All grades pass ASTM D-665A
Water Rust Test and ASTM D-665B Synthetic Sea Water Rust Test.
H1, Registration No. 32 # 140105 , No. 46 # 139414
NSF H1 Registration No. 32 #143321, No. 46 #143322,
No. 68 #143323, No. 100 #143324
Catalog No.
Net Wt.
HFSH1-022-640
HFSH1-022
HFSH1-032-640
HFSH1-032
HFSH1-046-640
HFSH1-046
HFSH1-068-640
HFSH1-068
HFSH1-100-640
HFSH1-100
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
09355X10068
09355X10069
09355X10070
09355X10071
09355X10072
09355X10073
09355X10074
09355X10075
09355X10076
09355X10077
SYNTHETIC GEAR FOOD GRADE
MACHINERY OIL, H1 8,000 HOUR
(ISOs 150, 220, 320, 460)
These NSF-certified H1 synthetic, food grade gear oils have been formulated to meet a variety of demanding applications where it may be
required or specified to use a synthetic in place of a standard white
mineral oil-based product. These polyalphaolefin (PAO) based synthetics are ideal oils for applications in which the gear lubricant is subject
to extreme temperature, high stress conditions and may require an extended drain interval. These fluids are all clean, zinc-free and offer exceptional water-separation characteristics – and will ensure stability over
a longer service life. All viscosity grades are appropriate for use in facilities where incidental contact with the edible product may occur.
NSF H1 Registration No. 150 #143325, No. 220 143326,
No. 320 143327, No. 460 143328
No. 68 - #139413, No. 100 - #139412
Catalog No.
HFH1-022-640
HFH1-022
HFH1-032-640
HFH1-032
HFH1-046-640
HFH1-046
HFH1-068-640
HFH1-068
HFH1-100-640
HFH1-100
Net Wt.
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
09355X50174
09355X50173
09355X50083
09355X50040
09355X50084
09355X50041
09355X50086
09355X50042
09355X50087
09355X50043
Catalog No.
GOSH1-150-640
GOSH1-150
GOSH1-220-640
GOSH1-220
GOSH1-320-640
GOSH1-320
GOSH1-460-640
GOSH1-460
Net Wt.
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
Phone 636•561•5007 • Fax 636•561•5006
MINO Code
L)
L)
L)
L)
09355X10078
09355X10079
09355X10080
09355X10081
09355X10082
09355X10083
09355X10084
09355X10085
9
BULK FLUIDS – Compressor, Pump & Turbine
RECIPROCATING COMPRESSOR OIL,
MINERAL 4,000 HOUR
(ISOs 32, 46, 68, 100, 220, 320)
These are high performance heavy duty circulating oils primarily intended for continuous reuse in circulation lubrication systems for gears
and bearings. This lubricant offers versatility in a wide range of industrial applications.
Catalog No.
COM-032-640
COM-032
COM-046-640
COM-046
COM-068-640
COM-068
COM-100-640
COM-100
COM-220-640
COM-220
COM-320-640
COM-320
Net Wt.
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
MINO Code
L)
L)
L)
L)
L)
L)
09355X50124
09355X50129
09355X50125
09355X50130
09355X50131
09355X50132
09355X50126
09355X50133
09355X50134
09355X50135
09355X50136
09355X50137
ROTARY SYNTHETIC
COMPRESSOR OIL 8,000 HOUR
(ISOs 32, 46, 68, 100, 150)
These high quality synthetic compressor oils are non-detergent products
fortified with ashless anti-wear additives. They are formulated to outperform petroleum-based compressor oils. They are non-foaming and rapidly separate from water. Use the appropriate viscosity grade of
product in single and multi-stage rotary screw, vane, reciprocating compressor crankcases and cylinders, vacuum pumps and other compressor
applications. It will extend drain intervals and is non-corrosive to yellow
metals.
Catalog No.
COS-032-640
COS-032
COS-046-640
COS-046
COS-068-640
COS-068
COS-100-640
COS-100
COS-150-640
COS-150
10
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
5 gal. (18 L)
55 gal. (208
09355X50050
09355X50044
09355X50051
09355X50045
09355X50052
09355X50046
09355X50053
09355X50047
09355X50054
09355X50048
L)
L)
L)
L)
L)
PREMIUM ROTARY PUMP OIL,
MINERAL
(ISO 100)
This specially compounded lubricant has been formulated to eliminate
contamination problems and build-up in industrial vacuum pumps and
auxiliary booster blowers. It provides long-lasting, extended high-temperature oxidation resistance yielding greatly extended drain intervals
and dramatically prolonged equipment life. It has been formulated with
premium base oils to ensure long-term stability and will rapidly separate
from water.
Catalog No.
PRP-100-640
PRP-100
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X50127
09355X50118
PREMIUM TURBINE AND
CIRCULATION OIL, MINERAL
(ISO 32)
These are superior performance turbine oils designed for use in steam
turbines, gas turbines and combined cycle gas turbine (CCGT) applications under the most severe operating conditions.
Catalog No.
TO-32-640
TO-032
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X50128
09355X50138
Phone 636•561•5007 • Fax 636•561•5006
BULK FLUIDS – Airline & Technical Grade White Oils
TECHNICAL GRADE FOOD GRADE
WHITE MINERAL OIL
(ISO 100)
This is a highly-refined, non-polar hydrocarbon that is odorless, tasteless
and colorless. It can be used as a lubricant, plasticizer, defoamer, rust
preventive and dust control agent in the manufacturing of food products, food handling equipment and food packaging material. It can
also be used in the flush segment of an operation.
Meets H1 requirements – NSF-Registration pending
Catalog No.
Net Wt.
MINO Code
WMO-015-128
WMO-015-640
WMO-015
WMO-100-640
WMO-100
1 gal. (4 L)
5 gal. (18 L)
55 gal. (208 L)
5 gal. (18 L)
55 gal. (208 L)
09355X10005
09355X00007
09355X00004
09355X50099
09355X50111
PREMIUM AIR LINE LUBRICANT,
FOOD GRADE H1 MINERAL
PREMIUM AIR LINE LUBRICANT,
FOOD GRADE H1 SYNTHETIC
This NSF-certified, H1 air line lubricant is a light viscosity, corrosion-resistant mineral lubricant with a wide temperature range from -80F to +
400F. It is ideal where water vapor is present and the emulsification of
the lubricant is not acceptable. Designed for compressed air systems,
coat the system and prevent the re-formation of harmful deposits.
This NSF-certified, H1 air line lubricant is a light viscosity, corrosion-resistant synthetic lubricant with a wide temperature range from -80F to
+ 400F. It is highly resistant to water washout and ideal where water
vapor is present and the emulsification of the lubricant is not acceptable. Designed for compressed air systems, it will dissolve gum build
up, coat the system and prevent the re-formation of harmful deposits.
This lubricant should be used where a synthetic is required.
H1, Registration No. 140105
Catalog No.
17641M
177041M
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X35650
09355X35652
H1, Registration No. 139230
Catalog No.
17032
17641
177041
Net Wt.
MINO Code
1 qt. (.94L)
5 gal. (18 L)
55 gal. (208 L)
09355X50006
09355X35551
09355X35552
PREMIUM AIR LINE LUBRICANT
MINERAL
This high quality mineral based lubricant has been formulated for the
most demanding air tool and line applications. It will provide emulsification of the moisture in the compressed air to prevent rust. It will help
prevent seizure and wear – and will resist oxidation to prevent lost time
due to gumming and varnishing. The thin viscosity of the oil helps ensure fluidity in extreme temperature environments.
This lubricant should be used where H1 Food Grade is not required.
Catalog No.
PAL-032-640
PAL-032
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X50168
09355X50167
Phone 636•561•5007 • Fax 636•561•5006
11
BULK FLUIDS – Engineered Class Chain Oils & Specialty Fluids
ENGINEERED CLASS PROOFER
CHAIN OIL, H1
(ISO 100 COT) Extra Tacky
The components of this lubricant meet the NSF requirements as an H1lubricant for use in bakery facilities. This lubricant is specifically formulated for lubrication in extreme-humidity environments. It is specifically
formulated to provide high performance lubrication on chains and other
food processing equipment. It is a highly tacky proofer chain lubricant.
Meets H1 requirements – NSF-Registration pending
Catalog No.
177040
Net Wt.
MINO Code
55 gal. (208 L)
09355X50104
ENGINEERED CLASS PACKER
CHAIN OIL, H1
(ISOs 320 COT, 460)
W
NE ENGINEERED
This NSF-certified, H1white-mineral oil based lubricant provides extraordinary coating and penetrating ability to resist wear. It performs well
in extreme temperature environments. It is highly stable and works well
in a wash-down operation. Our 320 COT version offers extra-tackiness.
H1, Registration No. 460 - #139411
No. 320 COT Meets H1 requirements –
NSF-Registration pending
Catalog No.
177043
177042
Net Wt.
MINO Code
55 gal. (208 L)
55 gal. (208 L)
09355X97100
09355X50105
CLASS SYNTHETIC
EXTREME LOW TEMPERATURE
CHAIN FLUID, FOOD GRADE H1
ISO 32
Food Grade, H1
Engineered Class Synthetic Extreme Low Temperature Chain Fluid, Food
Grade H1 ISO 32 is a fully synthetic Polyalphaolefin (PAO) based and
most commonly used in Spiral Freezer chain and conveyor applications.
It possesses excellent rust, corrosion and oxidative properties and has
been formulated to meet extremely high and low temperature requirements. This product has an operating temperature range of -40°F to
300°F.
NSF H1, Registration Pending
FIRE RETARDANT FOOD GRADE
HYDRAULIC FLUID WATER-GLYCOL
BASED, H1
(ISO 46)
Lubri-Loy FR FG water-glycol hydraulic fluid is manufactured in compliance with current Good Manufacturing Practices (cGMP). It is an ISO
VG 46 grade, water and glycol mixture that acts as a high performance, anti-wear hydraulic fluid that has been developed for applications that require a food grade product to be used in areas that involve
heat applications (fryers, ovens, cookers). The components of the lubricant are identified under 21 CFR 178.3570 and may be safely used on
machinery for producing, manufacturing, packing, processing, preparing, treating, packaging, transporting or holding food where incidental
contact (H1) may occur and is registered with NSF.
Meets H1 requirements – NSF-Registration pending
Catalog No.
HFNH1-046
HFNH1-046B-330
Net Wt.
MINO Code
55 gal. (208 L)
330 gal. tote
09355X50196
09355X50197
Catalog No.
SCFH1-032
MINO Code
09355X10111
W
NEENGINEERED
CLASS SYNTHETIC
HIGH TEMPERATURE CHAIN
FLUID,H2
High Temperature Synthetic Ester Lubricant
This Engineered Class Synthetic High Temperature Chain Fluid,
H2 is a premium high temperature synthetic ester lubricant formulated for conveyor roller ball bearing chains, pin and roller
chains, slides and gears that operate in high temperature oven
environments. It has a high flashpoint of 587°F. Lubri-Loy Engineered Class Synthetic High Temperature Chain Fluid, H2 provides outstanding metal wear resistance, rust protection and
excellent high temperature corrosion-oxidation stability which
minimize carbon and varnish deposits. Lubri-Loy Engineered
Class Synthetic High Temperature Chain Fluid, H2 has established several OEM approvals and credible testimonies from bakeries and other industries worldwide. Depending upon the type
of OEM oven as well as length and type of chain, operating temperatures can fluctuate but are generally between 500°F to
600°F.
Catalog No.
Net Wt.
MINO Code
1776640
177046
12
Net Wt.
55 gal. (18 L)
5 gal. (18 L)
55 gal. (18 L)
Phone 636•561•5007 • Fax 636•561•5006
09355X00006
09355X69485
BULK FLUIDS – Automotive & ATF
AUTOMOTIVE ENGINE OIL,
MINERAL
Lubri-Loy oils are designed with premium performance additive packages and blended with ultra high quality hydro-treated base stocks yielding outstanding engine protection and performance.
Lubri-Loy oils carry the API Service Symbol SL. The API donut is a sign
that the oil has undergone the same engine qualification testing as the
major oil brands. Furthermore, all oils licensed by the API undergo
yearly independent testing ensuring the licensing requirements are met.
Grade 10W-30 meets all American and most Japanese automakers’
warranty requirements for new cars. Additionally, all grades meet obsolete gasoline Service Categories (SA, SB, SH).
Catalog No.
AUTOMATIC TRANSMISSION FLUID,
DEXRON® III, MINERAL & SYNTHETIC
Lubri-Loy’s Automatic Transmission Fluid MERCON®/DEXRON® III is
formulated from select highly refined base oils blended with a specially
balanced additive combination. This product has outstanding high temperature oxidation resistance, dispersancy and detergency; offers excellent protection against corrosion, wear and rust; and is compatible with
the various automatic transmission components such as elastomeric seals
and plastic parts. In addition, its high viscosity index permits use over
a wide temperature range by providing excellent low temperature fluidity and at the same time retaining the desired viscosity at high temperatures.
It contains special friction modifiers that provide the smooth lock-ups required by the DEXRON® III and MERCON® specifications. Lubri-Loy’s
Automatic Transmission Fluid MERCON®/DEXRON® III meets all requirements of the Ford MERCON® specifications and is licensed to use
the MERCON® trademark, Ford approval number M050615. It also
meets all requirements of the GM DEXRON® III.
Catalog No.
Net Wt.
TF-D3-640 (Trans Fluid DIII)
5 gal. (18 L)
TF-D3 (Trans Fluid DIII)
55 gal. (208 L)
TFS-D3-640 (Trans Fluid DIII Syn) 5 gal. (18 L)
TFS-D3 (Trans Fluid DIII Syn)
55 gal. (208 L)
MINO Code
09355X50097
09355X50110
09355X50149
09355X50150
AEO-10W3-640 (10W30)
AEO-10W3 (10W30)
AEO-15W4-640 (15W40)
AEO-15W4 (15W40)
AEO-10W4-640 (10W40)
AEO-10W4 (10W40)
AEO-5W3-640 (5W30)
AEO-5W3 (5W30)
Net Wt.
5
55
5
55
5
55
5
55
gal.
gal.
gal.
gal.
gal.
gal.
gal.
gal.
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
MINO Code
09355X50095
09355X50107
09355X50096
09355X50108
09355X50151
09355X50152
09355X50153
09355X50154
AUTOMOTIVE ENGINE OIL,
SYNTHETIC
Lubri-Loy Synthetic Automotive Engine Oil is specially formulated
and suitable for use in gasoline & diesel European engines. LubriLoy Synthetic Oil is designed for extended drain intervals as suggested by European automobile manufactures. Additionally, it is
important to always follow manufacturer recommendations and
specifications.
Lubri-Loy Synthetic Oil provides all season performance and superior wear protection in all climates. Some grades are approved for turbo charged engines.
Catalog No.
Net Wt.
AEOS-10W3-640 (10W30Syn) 5
AEOS-10W3 (10W30Syn)
55
AEOS-15W4-640 (15W40Syn) 5
AEOS-15W4 (15W40Syn)
55
AEOS-10W4-640 (10W40Syn) 5
AEOS-10W4 (10W40Syn)
55
AEOS-5W3-640 (5W30Syn)
5
AEOS-5W3 (5W30Syn)
55
gal.
gal.
gal.
gal.
gal.
gal.
gal.
gal.
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
MINO Code
09355X50155
09355X50156
09355X50157
09355X50158
09355X50159
09355X50160
09355X50161
09355X50162
For all bulk fluid offerings additional ISOs, viscosities and specialty oils available on request.
Phone 636•561•5007 • Fax 636•561•5006
13
BULK FLUIDS – Automotive Gear and Monograde Engine Oils
AUTOMOTIVE GEAR OIL,
MINERAL AND SYNTHETIC
GL-4 AND 5
Multipurpose Gear Oils, both mineral and synthetic, are used for the lubrication of gears operated under severe conditions, including automotive applications. High quality HVI base stocks blended with a
sulfur-phosphorous extreme pressure additive package provide superior
performance including anti-weld, anti-scuff, and anti-wear properties.
Multipurpose Gear Oils are available GL-5 performance levels.
The GL-5 Multipurpose Gear Oils have multi-grade characteristics and
are recommended for hypoid gears in moderate and severe service,
including shock-loading, and some manual transmissions. GL-5 Gear
Oils meet MIL-L-2105D, Mack GO-J, Rockwell 0-76-D (80W-90) and
0-76-D (85W-140) specifications.
Catalog No.
Net Wt.
AGO-8W9-640 (80W90)
5
AGO-8W9 (80W90)
55
AGOS-8W9-640 (80W90Syn)
5
AGOS-8W9 (80W90Syn)
55
AGO-8W140-640 (85W140)
5
AGO-8W140 (85W140)
55
AGOS-8W140-640 (85W140Syn)5
AGOS-8W140 (85W140Syn)
55
gal.
gal.
gal.
gal.
gal.
gal.
gal.
gal.
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
(18 L)
(208 L)
MINO Code
09355X50098
09355X50109
09355X50140
09355X50141
09355X97104
09355X50146
09355X50147
09355X50148
MONOGRADE ENGINE OILS - DIESEL
30W ENGINE OIL
These oils are for use in diesel engines under service conditions from
mild to heavy duty with fuel of any sulfur level. These oils are recommended for use in nearly all two- and four-cycle diesel applications. The
current formulations meet all API Service Classifications up to CI-4 and
also meet the requirements of the military specifications MIL-L-2104F
and MIL-L-2104G. They are suitable where Allison C-4 or Caterpillar
TO-2 fluids are specified; in addition they meet the Caterpillar ECF-1
Catalog No.
specification.
40W ENGINE OIL
These oils should not be used in Caterpillar TO-4 applications, two-cycle
gasoline engines, aircraft engines, or EMD Diesel engines.
Catalog No.
10W ENGINE OIL
Catalog No’s. 10W
AEO-10-640
AEO-10
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X10001
09355X10002
AEO-30-640
AEO-30
AEO-40-640
AEO-40
20W ENGINE OIL
Catalog No’s 20W.
AEO-20-640
AEO-20
14
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X10003
09355X10004
Phone 636•561•5007 • Fax 636•561•5006
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X50172
09355X50171
Net Wt.
MINO Code
5 gal. (18 L)
55 gal. (208 L)
09355X50170
09355X50169
SPECIALTY FLUIDS
REVIVE
This highly concentrated oil fortifier dramatically reduces heat and friction and increases the lubricity
of all oils including synthetics in equipment, engines,
gear boxes, transmissions, hydraulic systems, and
other applications that require increased lubricity. It
is very economical and used in gear boxes at a 5%
ratio.
Catalog No.
1016
1128
1640
17040
Catalog No.
4016W
4128W
4640W
47040W
Net Wt.
MINO Code
16 oz. (453 g)
1 gal. (3.78 L)
5 gal. (18 L)
55 gal. (208 L)
09355X10021
09355X10023
09355X10022
09355X10012
DIESEL FIX WINTER
DIESEL FIX
A fully compounded, multi-functional diesel fuel treatment and conditioner. Specifically formulated to
save fuel and to boost the performance of the fuel
system. Diesel Fix Winter offers all the traditional
benefits of Diesel Fix with the addition of anti-gel to
-30°F.
A fully compounded, multi-functional diesel fuel treatment and conditioner. Specifically formulated to
save fuel and to boost the performance of the fuel
system. Cetane booster. Cleans injectors and
plungers, reduces blake smoke and lubricates lowsulfur fuel. It will protect the fuel to -10°F.
Net Wt.
MINO Code
Catalog No.
16 oz. (453 g)
1 gal. (3.78 L)
5 gal. (18 L)
55 gal. (208 L)
09355X50142
09355X50143
09355X50144
09355X50145
4016
4128
4640
47040
Net Wt.
MINO Code
16 oz. (453 g)
1 gal. (3.78 L)
5 gal. (18 L)
55 gal. (208 L)
09355X10016
09355X10017
09355X10019
09355X10018
Phone 636•561•5007 • Fax 636•561•5006
15
SPECIALTY PRODUCTS
LUBRI-CUT HEAVY DUTY,
SEMI-SYNTHETIC
Heavy Duty Concentrated, Water-Soluble Cutting
Fluid, 35300
This is an eco-friendly semi-synthetic metalworking fluid with superior
performance for critical, heavy-duty applications. This product contains
unique bio-inert ingredients designed to significantly reduce odors and
problems associated with biological growth. This unique blend of highly
polar ingredients provides the necessary balance of cooling and lubrication required for extended tool life specifically in maching hard material, without the use of chlorine or sulfur.
Lubri-Cut 35300 Cutting Fluid provides superior chip settling properties
and controlled detergency to prevent tacky residues from forming during machining and grinding operations. In addition, the inherent stability of this product resists depletion due to hard water build up or
microbial action. This product should be used at 5% - 10% water dilution ration.
Catalog No.
LC3-016 (Diluted)
LC3-128
LC3-640
LC3-7040
Net Wt.
MINO Code
16 oz. (453 g)
1 gal. (3.78 L)
5 gal. (18 L)
55 gal. (208 L)
09355X97101
09355X50013
09355X50014
09355X50015
LUBRI-CUT REGULAR,
SEMI-SYNTHETIC
Concentrated Water-Soluble Cutting Fluid, 35100
TRIGGER SRAYER
MECHANISM,
INDUSTRIAL RATED
This is an eco-friendly metalworking fluid offering superior performance
for applications. This unique blend of highly polar ingredients provides
the necessary balance of cooling and lubrication required for extended
tool life. It also offers superior chip settling properties and controlled detergency to prevent tacky, gritty residues from forming during machining and grinding operations. The inherent stability of this product resists
depletion due to hard water build-up or microbial action. This product
should be used at 5% water dilution ration.
Battery powered trigger sprayer for use with
viscous bulk products. It offers multiple spray
patterns - from fan to pinpoint and fits standard size 1/2 and 1 gallon bottles.
Catalog No.
Net Wt.
MINO Code
Catalog No.
MINO Code
LC-016 (Diluted)
LC-128
LC-640
LC-7040
16 oz. (453 g)
1 gal. (3.78 L)
5 gal. (18 L)
55 gal. (208 L)
09355X50112
09355X50012
09355X50010
09355X50009
7020
09355X10035
16
Phone 636•561•5007 • Fax 636•561•5006
LUBRI-LOY®
SINCE 1949
LUBRI-LOY VALUE-ADDED SERVICE CAPABILITIES
PLANT LUBRICATION SURVEYS
Every manufacturing facility is unique and requires different lubrication needs – from bulk oils to greases to aerosol products.
Lubri-Loy will customize a lubrication program based on the customer’s needs – eliminating unnecessary inventory duplication
as well as obsolesence. We will help to correct “minimums and maximums” as well as re-establish re-order points and backup inventory by measuring high and critical-usage products. We will help to implement a successful, single-source managed
inventory concept.
ON-SITE END USER AND DISTRIBUTOR TRAINING
Many times product usage as well as proper application can be confusing. We will assist with on-site training and developing interchange
materials to assure maintenance personnel are properly educated and updated on product usage as well as the necessary
application. We offer Best Practices for lubrication handling, storage, lubrication regimes and much more. This
helps to improve your overall reliability and reduce your operating costs.
EQUIPMENT TAGGING
Our customized equipment tagging and labeling program is designed to help the end user accurately identify the
proper lubricant from bulk storage to the fill point. Our color-coded tagging system is designed to fit your needs and will help
to ensure maintenance personnel are fully aware of P.M.s and proper product identification including distinguishing Food
Grade H1 from Non-Food Grade requirements.
FIELD ENGINEERING SUPPORT
Our salespeople are seasoned industry veterans who understand the manufacturing and lubrication application process.
OIL, FLUID AND GREASE ANALYSIS
We offer services to analyze your products to test for important attributes such as extreme pressure, wear resistance and
temperature capabilities. We will perform standardized and accepted test procedures that include Four Ball and Timken-style
load tests to measure the characteristics and properties of products. We will also conduct opacity, black-smoke testing for safety,
health and environmental concerns of off-road, underground diesel equipment.
DIVERSE MANUFACTURING FACILITY CAPABILITIES
Lubri-Loy offers a unique and technologically-advanced array of products to meet the demands of many different types of
manufacturing facilities. We offer food grade, petroleum-based, synthetic as well as a variety of specialty products for:
• Food Processing
• Pharmaceutical
• Bakery
• Grain
• Foundry
• Lumber
• Quarry
• Textile
• Milling
• Chemical
• Beverage
• Commercial Trucking
DRUM RECYCLING SERVICES
Unused oil drums occupy valuable storage space. By removing and rotating these drums at regular intervals, you will assure
that your product inventory and storage space remains updated and current in a timely manner.
PRIVATE LABEL CAPABILITIES
In some instances, customers want the ability to brand and market their own identity and name. Lubri-Loy will customize
private-label programs to help companies market themselves through their own lubrication products and solutions.
Phone 636•561•5007 • Fax 636•561•5006
Distributed By:
LUBRI-LOY®
SINCE 1949
International Headquarters
150 Enterprise Drive
Wentzville, MO 63385
Phone 636•561•5007 • Fax 636•561•5006
2011