Cruiser 402 / 502

Transcription

Cruiser 402 / 502

WELD THE WORLD
PRICE LIST NEW LINE 2014
English
Company Profile
• Weco has been producing and selling for 15 years welding machines.
• All our welding machines are 100 % in Europe (North of Italy) produced.
• A wide range of welding machines have been by Weco developed MMA - TIG (DC and
AC/DC) - MIG/MAG - MIG/MAG PULS.
• Service and relations from a partnership point of view.
• Each year we invest over 10% of our turnover in the design and development of
technologies that can innovate our products.
Index
Cruiser 402 / 502
Cruiser 402 / 502 SYNERGIC
Power Pulse 402 / 502
Cruiser 402T / 502T
Cruiser 402T / 502T SYNERGIC
Power Pulse 402T / 502T
MicroPulse 302MFK
7
8
10
12
14
16
18
Structure logos
POWER
INVERTER
INSIDE
Power Inverter Inside
• Higher Efficiency
• Lower Energy Demand
Higher efficiency and better welding quality thanconventional power sources.
Overall weight reduction for easier transportation and
movement.
Weco Inverter supplies a better quality welding arc, with no
spattering, repeatable
in time and unaffected by main voltage fluctuation.
Reworking time and money saving.
Real lower overall electric consumption.
W.ECO Technology Inside
• Lower harmonic current
emissions
WECO technology according to EN-60974-10, reduces
harmonic current emissions. and 20% input current,
increasing the power inverter efficiency.
W.ECO Technology Inside
POWER FACTOR CORRECTOR:
• Lower harmonic current
emissions
• Lower input current
WECO technology according to EN-60974-10, reduces
harmonic current emissions. and 20% input current,
increasing the power inverter efficiency.
Total Protection
• Maximum reliability
A built-in Total Protection Device saves the inverter
components from overvoltage and makes the unit suitable
for use with unstable power supply and motor-generators.
Phase Detector
• Maximum protection
A built-in Phase detector, saves the inverter components in
case of lack of a Phase in the input voltage.
Volt Reduction Device
• Maximum safety
Function VRD (Volt Reduction Device) reduces automatically the voltage of the welding machine during the Standby
mode in order to allow the processing in those building site
where low voltages are demanded for safety reasons (Dockyards, petrol platforms and so on).
HAC Hybrid Arc Control
• Soft Arc, Low Spattering
• Better welds, Money Savings
WECO unique HAC (Hybrid Arc Control) supplies a soft and
very stable MIGMAG welding arc with excellent weld bead
quality and minimal spattering in any working conditions.
Function logos
Cell
2,5KHz
SYN
Digital control and excellent welding with cellulosic electrodes is an optimized combination also for
piping and Oil & Gas industry applications.
The pulse TIG with frequency until 2500Hz allows to weld very thin materials with easy arc control and
very low heat input on workpiece.
Pre-set balanced parameters, stored in the Synergic Pulse TIG DC SYN curve, simplify Pulsed welding
by adjusting only welding current.
The Q START (Quick start) function facilitates joining of the parts in the initial stage of the welding
process.
The DYNAMIC ARC function makes it possible to keep the product of Voltage x Current constant. The
power source increases the welding current as the arc voltage decreases and reduces the welding
current if the arc voltage increases.
The Q-Spot (Quick Spot) function makes it possible to minimise tacking times for light gauge sheet
metal.
The MULTITACK system makes it possible to reduce heat output while joining two light gauge parts.
Function logos
This makes it possible to create a highly penetrative and precise fusion bath so that very light
gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC TIG welding.
0
0
+
+
-
-
This allows to obtain high welding speed and creating the weld puddle rapidly on a cold
workpiece. Questa funzionalità permette di ottenere elevate velocità di saldatura e creando
più velocemente il bagno di saldatura a pezzo freddo. E’ inoltre possibile la saldatura di spessori
più grossi con amperaggi modesti.
1. Higher execution speed
2. Higher deposition rate
3. Lower heat input and less plastic deformation
4. Better mechanical properties
5. Higher penetration, lower risk of lack of fusion
6. Lower production costs and depreciation
1 - Higher penetration, lower risk of lack of fusion
2 - Higher execution speed
3 - Higher arc stability also with longer stick-out
4 - Lower costs of joint preparetion
Approvals
Our MIG MAG SYNERGIC and MIG MAG PULSE generators are approved according to european
norm EN 1090 with specific reference to sheet metal constructions.
Cruiser 402 / 502
Processes: MMA - TIG DC LIFT - MMA CELLULOSIC - ARC AIR
Cruiser 402 / 502 is an Heavy Duty professional 3 Phase inverter power source for MMA Welding and TIG DC applications with excellent
arc characteristics.
Electrodes up to 8mm diameter can be easily welded thanks to its
400A- 100% duty factor at 40°C.
Cruiser 402 / 502 is specifically designed for tough working conditions such as professional maintenance, shipbuilding, offshore,
shipyards, boat-maintenance, repair and heavy metal constructions.
Digital control and excellent welding with cellulosic electrodes is an
optimized combination also for piping and Oil & Gas industry applications.
Arc Air process provides high quality gauging with up to 6mm diameter carbon electrode.
Hot Start and Arc Force are adjustable in MMA welding and guarantee a better arc ignition, smoother deposition and fluent welding.
Anti Sticking allows electrode unstick from the base material in case
of accidental sticking.
Discovery 400/500 can be easily upgraded to Cruiser 400 MIG/MAG
welding system by adding wire feeder, cable bundle and on request
trolley and water cooler.
• Fan on demand and Built-in Wind Tunnel protects electronic devices
from dust and saltiness and improves reliability
• Microprocessor controls real-time welding parameters
• Digital display for setting and reading welding parameters
• Lift TIG DC Ignition reduces Tungsten inclusions
• Trolley available
• Remote Control applicable
CE Directives: 2002/95/CE, 2004/108/CE, 2006/95/CE
CE Standards: EN 60974-1, EN 60974-10
CODE
Structure
Functions
Cell
€
Cruiser 402
001.0103.0000 3800,00
Cruiser 502
001.0104.0000 4050,00
Trolley E
004.0000.0005 280,00
Trolley 03
006.0002.0042 320,00
Electrode Holder 70mm2 L=4m
Earth Cable 70mm2 L=4m
006.0002.0025 140,00
Torch TIG 26 valve L= 4m
006.0005.0002 152,00
RC03 Remote Control 1 potentiometer
006.0003.0120 160,00
Cable RC03 L=5m
6pins
022.0002.0166 45,00
Cable RC03 L=10m
6pins
022.0002.0167 50,00
Cable RC03 L=15m
6pins
022.0002.0168 60,00
006.0002.0017 140,00
Suggested composition Cruiser 402
4360,00
Cruiser 402 + Trolley E + Electrode Holder 70mm2 L=4m +
Suggested composition Cruiser 502
4610,00
Cruiser 502 + Trolley E + Electrode Holder 70mm2 L=4m +
Cruiser 402
Cruiser 502
3x400Vac ± 15% @ 50-60Hz
3x400Vac ± 15% @ 50-60Hz
32A
32A
TIG - WIG
MMA
TIG - WIG
MMA
100%
100%
50%
60%
100%
50%
60%
100%
400A
400A
500A
460A
400A
500A
450A
400A
5A - 400A
5A - 400A
5A - 500A
5A - 500A
8/85V
8/95V
8/85V
8/95V
18,1kVA - 16,0kW
24,3kVA - 22,0kW
23S
23S
1160x670x1020mm
1160x670x1020mm
118Kg
118Kg
7
Price List New Line 2014
CRUISER 402 / 502 SYNERGIC
3 x 400Vac
Cruiser 400 Synergic is a professional synergic 3 Phase Inverter
Power Source (400A 100% at 40° C) with separated wire feeder for
MIG-MAG welding. MMA, MMA cellulosic, Lift TIG DC and ARC AIR
cutting and gouging processes are also available. A wide range of
MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 400 Synergic power source can be easily moved on difficult working areas thanks to
robust designed K-trolley. WF 103 wire feeder with electrode holder
connector, long cable bundle connectable and optional gas flow-meter, is suitable for shipyard applications. WF 105 wire feeder is ideal
for any kind of workshops, medium size carpentry, heavy construction and automotive.
MMA, ARC AIR and MIG-MAG processes are directly selectable on
the wire feeder. Microprocessor, inverter technology, digital displays,
synergic curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative
WECO unique HAC (Hybrid Arc Control) supplies a soft and very
stable MIG-MAG arc with excellent weld bead quality and minimal
spattering in any working conditions. 3T Mode allows both Hot Start
and Crater Filler current setting, for optimal penetration at start and
crater filling at bead’s end. Additional parameters, Motor Slope, Soft
Start, Burn Back and Post Gas are included for perfect arc ignition and
optimum wire cutting at the end of welding.
Version
H2O
•
•
•
•
•
•
Modular concept allows easy welding system upgrade
Up to 8mm diameter electrode welding is possible in MMA
Arc Air gouging and cutting up to 6mm electrode
Lift TIG DC ignition reduces Tungsten inclusions
Cooling Unit available
Fan on demand and Built-in Wind Tunnel protects electronic
devices from dust and saltiness and improves reliability
• Push-Pull torch applicable for MIG aluminum welding
Processes: MIG/MAG - TIG DC LIFT - MMA - MMA CELLULOSIC - ARC AIR
Version
AIR
Structure
Functions
VP01
Cell
Cruiser 402 Synergic
Cruiser 502 Synergic
3x400Vac ± 15% @ 50-60Hz
3x400Vac ± 15% @ 50-60Hz
32A
32A
MIG - MAG
TIG - WIG
MMA
MIG - MAG
TIG - WIG
100%
100%
100%
50% 60% 100% 50% 60% 100% 50% 60% 100%
400A
400A
400A
500A 450A 400A 500A 460A 400A 500A 450A 400A
20A - 400A
5A - 400A
5A - 400A
20A - 500A
5A - 500A
5A - 500A
8/85V
8/85V
8/95V
8/85V
8/85V
8/95V
18,1kVA - 16,0kW
24,3kVA - 22,0kW
23S
23S
1160 x 670 x 1530mm
1160 x 670 x 1530mm
140,0Kg
140,0Kg
8
MMA
Wire Feeder WF103 - WF105
For 200mm - 300mm Spools
WF103
CODE
€
Cruiser 402
001.0103.0000 3800,00
Cruiser 502
001.0104.0000 4050,00
Wire Feeder WF103
001.0317.0000 2051,00
Wire Feeder WF105
001.0319.0000 2116,00
Wheels Kit WF
010.0000.0012
Interconnection cable 70mmq L=2mt AIR
002.0001.0241 230,00
002.0001.0242 350,00
66,00
Interconnection cable 95mmq L=10mt AIR 002.0001.0243 590,00
Cooling Unit C.U.09
003.0000.0101 1150,00
Interconnection cable 70mmq L=2mt H2O 002.0001.0251 262,00
• Robust construction for heavy duty use
• Portable 4-roll drive wire feeder
• Air Cooled (AIR) and Water Cooled (H2O) versions available for any
kind of torch.
• Optical encoder on motor drive for maximum precision of the wirefeed speed.
• 120W motor drive
• Optional wheels Kit
• V shape drive rolls 1,0/1,2mm as standard
• Repeatable welding results based on WPS
MOTOR DRIVE
42VDC
120W
1,5 - 22,0m/min
d
D
N°4 D=30mm - d=22mm
Fe 0,8 - 1.6mm
Al 0,8 - 1,6mm
FCW 0,8 - 1,6mm
WF105
Torch MIG MB 501D L= 4m H2O EURO
006.0008.0006 379,00
Trolley M
004.0000.0012 595,00
Tool BOX VP-01 (AIR VERSION)
004.0000.0201 180,00
006.0002.0025 140,00
006.0005.0002 152,00
RC04 Remote Control 2 potentiometers
006.0003.0121 200,00
RC05 Remote Control 1 up/down
006.0003.0122 160,00
006.0003.0123 200,00
Cable RC03/04/05/06 L=5m
14pins
022.0002.0172
50,00
Cable RC03/04/05/06 L=10m 14pins
022.0002.0173
56,00
022.0002.0174
67,00
006.0002.0017 140,00
PUSH PULL KIT 321MKS WF105/107
010.0000.0040 210,00
Gas regulator MANOMETER
006.0002.0011 145,00
Gas regulator FLOWMETER
006.0002.0005 158,00
Suggested composition Cruiser 402 AIR WF103:
7042,00
Cruiser 402 + WF103 + Wheels Kit WF + Trolley M + VP-01 +
7107,00
Suggested composition Cruiser 402 H2O WF103:
8055,00
Cruiser 402 + C.U.09 + WF103 + Wheels Kit WF + Trolley M +
Interconnection cable 70mmq L=4mt H2O
8120,00
kind of torch.
MOTOR DRIVE
7292,00
Cruiser 502 + WF103 + Wheels Kit WF + Trolley M+ VP-01 +
7357,00
8305,00
1,0 - 20,0m/min
D
42VDC
120W
d
N°4 D=37mm - d=19mm
Fe 0,6 - 1.6mm
Al 0,8 - 3,2mm
FCW 1,0 - 3,2mm
8370,00
9
POWER PULSE 402 / 502
3 x 400Vac
Version
H2O
Power Pulse 402 / 502 is an Heavy Duty (400A 100% at 40°C) professional 3 Phase Inverter Power Source with separated wire feeder
WF 104.
A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires:
– MAT (wire type)
– ø (wire diameter)
– Gas (shielded gas type)
- Welding parameters (wire speed, amps or material thickness)
Pulse HS allows:
1 - Increase considerably execution speed
2 - Increase deposition rate (Kg/h)
3 - Deeper penetration, lower risk of lack of fusion and deformations.
4 - Reduce heat input
Power Focus allows:
3 - More arc stability even with longer stick-out
4 - Low costs of mechanical preparation of caulkers
- Modular concept allows multi-welding processes
- Cooling Unit available
- Fan on request and Built-in Air Tunnel protects electronic devices
- 3T Special allows both Hot Start and Crater Filler current setting, for
optimal penetration at start and crater _lling at bead’s end
- Memory locations for welding process repeatability
- Push-Pull torch applicable for MIG aluminum welding
- Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit
Processes: MIG/MAG PULSATO/SYNERGIC - TIG DC LIFT - MMA - ARC AIR
Version
AIR
Structure
Functions
VP01
Cell
POWER PULSE 402
POWER PULSE 502
3x400Vac ± 15% @ 50-60Hz
3x400Vac ± 15% @ 50-60Hz
32A
32A
MIG - MAG
TIG
MMA
100%
100%
100%
50% 60% 100% 50% 60% 100% 50% 60% 100%
MIG - MAG
500A 450A 400A 500A 460A 400A 500A 450A 400A
400A
400A
400A
5A - 400A
5A - 400A
5A - 400A
5A - 500A
8/85V
95V
8/85V
8/85V
18,8kVA - 17,0kW
TIG
5A - 500A
5A - 500A
8/85V
95V
25,8kVA - 23,5kW
23S
23S
1100 x 500 x 1440mm
1100 x 500 x 1440mm
132,0Kg
132,0Kg
10
MMA
Wire Feeder WF104
WF104
CODE
€
Power Pulse 402
001.0107.0000 5200,00
Power Pulse 502
001.0108.0000 6050,00
Wire Feeder WF104
001.0315.0000 2260,00
Wheels Kit WF
010.0000.0012
002.0001.0241 230,00
002.0001.0242 350,00
66,00
Cooling Unit C.U.09
003.0000.0101 1150,00
kind of torch.
006.0008.0006 379,00
Torch MIG MB 501D L=4m Digimanager
006.0008.0018 690,00
Trolley M
004.0000.0012 595,00
004.0000.0201 180,00
006.0002.0025 140,00
006.0005.0002 152,00
006.0003.0121 200,00
006.0003.0122 160,00
006.0003.0123 200,00
Cable RC03/04/05/06 L=5m
14pins
022.0002.0172
50,00
022.0002.0173
56,00
022.0002.0174
67,00
006.0002.0017 140,00
PUSH PULL KIT 321 PULSE / WF104
010.0000.0039 210,00
006.0002.0011 145,00
Feeding Rolls
006.0002.0005 158,00
002.0000.0140
34,00
Suggested composition POWER PULSE 402 AIR
8651,00
Power Pulse 402 + WF104 + Wheels Kit WF + Trolley M +
Tool BOX VP-01 + Interconnection cable 70mmq L=4mt AIR
Suggested composition POWER PULSE 502 AIR
9501,00
Power Pulse 502 + WF104 + Wheels Kit WF + Trolley M +
Tool BOX VP-01 + Interconnection cable 70mmq L=4mt AIR
3, 2, 1 ... GO!
The 3 simple operations for setting and adjusting welding parameters
ensure the quick setting-up of the machine without the need to
read complicated user manuals, which avoids an unnecessary waste
of time. The large and clearly visible front panel shows all the set
parameters at any given time.
MOTOR DRIVE
Suggested composition POWER PULSE 402 H2O
9664,00
Power Pulse 402 + C.U.09 + WF104 + Wheels Kit WF + Trolley M +
42VDC
120W
1,0 - 20,0m/min
d
D
Suggested composition POWER PULSE 502 H2O
N°4 D=37mm - d=19mm
Fe 0,6 - 1.6mm
Al 0,8 - 3,2mm
FCW 1,0 - 3,2mm
10514,00
Power Pulse 502 + C.U.09 + WF104 + Wheels Kit WF + Trolley M +
11
Cruiser 402T / 502T
3 x 400Vac
Cruiser 402T/502T is a high sophisticated 3 Phases Inverter DC .
This TIG DC HF inverter generator can easily weld ordinary steels,
stainless steel and copper.
Cruiser 402T/502T is particularly indicated for extremely precise
constructions, in petrochemical plants, food industry and other
activities which require very high welding performance.
Weco Special HF control grants 100% a rapid and highly precise arc
ignition.
The DC welding is here optimized thanks to:
TIG PULS up to 2,5 Khz and TIG PULS SYN (Synergic)
– The Dynamic Arc (DYNarc) function which ensures an enhanced
welding penetration, a better stability of the arc, avoiding any gluing
between electrode and base metal; it allows to adjust the welding arc,
just through slight torch’s movements, at any welding conditions.
– The Q-Start function, makes the sheet tacking easier and minimize
the time for it at the beginning of the welding process.
– The Multi-Tack function, allows to minimize the heat output during
the welding process and reduces the base material’s oxidation. This
function permits often to avoid the post welding acid-treatments.
– The Q-Spot function, permits to carry out very easily and precisely
the sheet tacking operation, with minimum heat output and sheet
deformation. It allows the positioning of the electrode on the exact
tacking spot.
– 50 programs can be loaded and saved in memory
– Remote controls are available: for torch (UP&DOWN, potentiometer),
foot pedal or remote control unit
– Cooling unit, available
Processes: TIG DC - MMA
CODE
€
Cruiser 402T
001.0105.0000 5500,00
Cruiser 502T
001.0106.0000 6450,00
Cooling Unit C.U.09
003.0000.0101 1150,00
Trolley L
004.0000.0011 570,00
006.0002.0017 140,00
Torch TIG 18 L=4m H2O PT
006.0005.0006 293,00
Structure
006.0002.0025 140,00
Torch TIG 18 L=4m H2O Potenziometer (*) 006.0005.0003 345,00
Functions
Torch TIG 18 L=4m H2O Up/Down
006.0005.0010 335,00
RC02 Foot pedal
006.0003.0102 420,00
Cable RC02 L=5m
022.0003.0105 45,00
Cable RC02 L=10m
022.0003.0106 50,00
Cable RC02 L=15m
022.0003.0107 60,00
006.0002.0011 145,00
006.0002.0005 158,00
(*) Adaptor AMPHENOL-MILITARY A1
022.0002.0068 36,00
Suggested composition CRUISER 402T:
7220,00
Cruiser 402T + C.U.09 + Trolley L
SYN
Suggested composition CRUISER 502T:
8170,00
Cruiser 502T + C.U.09 + Trolley L
CRUISER 402T
CRUISER 502T
3x400Vac ± 15% @ 50-60Hz
32A
TIG
MMA
100%
100%
400A
400A
5A – 400A
5A – 400A
8/85V
95V
18,8kVA - 17,0kW
23S
690 x 290 x 450mm
54,0kg
3x400Vac ± 15% @ 50-60Hz
32A
TIG
MMA
50%
60%
100%
50%
60%
100%
500A
460A
400A
500A
450A
400A
5A – 500A
5A – 500A
8/85V
95V
25,8KVA - 23,5kW
23S
690 x 290 x 450mm
54,0kg
12
13
Cruiser 402T / 502T Synergic
3 x 400Vac
H2O
Version
Cruiser 402T Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40° C) with separated wire feeder for MIGMAG welding. MMA, TIG DC HF and ARC AIR cutting and gouging
processes are also available.
A wide range of MIG-MAG synergic programs facilitate the selection
of precise welding parameters using any welding wires.
MMA, ARC AIR and MIG-MAG processes are directly selectable on
the wire feeder. Microprocessor, inverter technology, digital displays,
synergic curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative
WECO unique HAC (Hybrid Arc Control) supplies a soft and very
stable MIG-MAG arc with excellent weld bead quality and minimal
spattering in any working conditions.
The DC welding is here optimized thanks to:
– The Dynamic Arc (DYNarc) function which ensures an enhanced
welding penetration, a better stability of the arc, avoiding any gluing
between electrode and base metal; it allows to adjust the welding arc,
just through slight torch’s movements, at any welding conditions.
– The Q-Start function, makes the sheet tacking easier and minimize
the time for it at the beginning of the welding process.
– The Multi-Tack function, allows to minimize the heat output during
the welding process and reduces the base material’s oxidation. This
function permits often to avoid the post welding acid-treatments.
– The Q-Spot function, permits to carry out very easily and precisely
the sheet tacking operation, with minimum heat output and sheet
deformation. It allows the positioning of the electrode on the exact
tacking spot.
Processes: MIG/MAG - TIG DC HF - MMA - ARC AIR
CRUISER 402T SYNERGIC
Structure
3x400Vac ± 15% @ 50-60Hz
32A
TIG DC Functions
MIG - MAG
TIG
MMA
100%
100%
100%
400A
400A
400A
5A - 400A
5A - 400A
5A - 400A
8/85V
8/85V
95V
18,8kVA - 17,0kW
23S
SYN
1100 x 500 x 1440mm
2,5KHz
132,0Kg
CRUISER 502T SYNERGIC
3x400Vac ± 15% @ 50-60Hz
32A
MIG - MAG
TIG
MMA
50% 60% 100% 50% 60% 100% 50% 60% 100%
500A 450A 400A 500A 460A 400A 500A 450A 400A
5A - 500A
5A - 500A
5A - 500A
8/85V
8/85V
95V
25,8kVA - 23,5kW
23S
1100 x 500 x 1440mm
132,0Kg
14
Wire Feeder WF103 - WF105
CODE
WF103
€
Cruiser 402T
001.0105.0000 5500,00
Cruiser 502T
001.0106.0000 6540,00
Wire Feeder WF103
001.0317.0000 2051,00
Wire Feeder WF105
001.0319.0000 2116,00
Wheels Kit WF
010.0000.0012
002.0001.0241 230,00
002.0001.0242 350,00
66,00
Cooling Unit C.U.09
003.0000.0101 1150,00
kind of torch.
MOTOR DRIVE
42VDC
120W
D
006.0008.0006 379,00
Trolley M
004.0000.0012 595,00
004.0000.0201 180,00
006.0002.0025 140,00
006.0005.0002 152,00
006.0003.0121 200,00
N°4 D=30mm - d=22mm
Fe 0,8 - 1.6mm
Al 0,8 - 1,6mm
FCW 0,8 - 1,6mm
WF105
006.0002.0017 140,00
006.0003.0122 160,00
006.0003.0123 200,00
14pins
022.0002.0172
50,00
022.0002.0173
56,00
022.0002.0174
67,00
010.0000.0040 210,00
Cable RC03/04/05/06 L=5m
1,5 - 22,0m/min
d
006.0002.0011 145,00
006.0002.0005 158,00
Suggested composition CRUISER 402 T AIR WF103:
8742,00
Cruiser 402T + WF103 + Wheels Kit WF + Trolley M + VP-01
8807,00
Suggested composition CRUISER 402 T H2O WF103:
9755,00
kind of torch.
MOTOR DRIVE
D
9782,00
9847,00
10795,00
1,0 - 20,0m/min
d
42VDC
120W
9820,00
N°4 D=37mm - d=19mm
Fe 0,6 - 1.6mm
Al 0,8 - 3,2mm
FCW 1,0 - 3,2mm
10860,00
15
POWER PULSE 402T / 502T
3 x 400Vac
H2O
Version
Power Pulse 402T / 502T is an Heavy Duty (400A 100% at
40°C) professional 3 Phase Inverter Power Source with separated wire feeder WF 104. A wide range of MIG-MAG synergic
programs facilitate the fast selection of precise welding parameters using any welding wires:
HSL Pulse allows:
Power Focus allows:
4 - Low costs of mechanical preparation of caulkers
Processes: MIG/MAG PULSE/SYNERGIC - TIG DC HF - MMA - ARC AIR
The DC HF welding is here optimized thanks to:
– The Dynamic Arc (DYNarc) function which ensures an
enhanced welding penetration, a better stability of the arc,
avoiding any gluing between electrode and base metal; it
allows to adjust the welding arc, just through slight torch’s
movements, at any welding conditions.
– The Q-Start function, makes the sheet tacking easier and
minimize the time for it at the beginning of the welding
process.
– The Multi-Tack function, allows to minimize the heat
output during the welding process and reduces the base
material’s oxidation. This function permits often to avoid the
post welding acid-treatments.
– The Q-Spot function, permits to carry out very easily and
precisely the sheet tacking operation, with minimum heat
output and sheet deformation. It allows the positioning of the
electrode on the exact tacking spot.
POWER PULSE 402T
Structure
3x400Vac ± 15% @ 50-60Hz
32A
MIG MAG Functions
MIG - MAG
TIG
MMA
100%
100%
100%
400A
400A
400A
5A - 400A
5A - 400A
5A - 400A
8/85V
8/85V
95V
18,8kVA - 17,0kW
23S
1100 x 500 x 1440mm
132,0Kg
POWER PULSE 502T
TIG DC Functions
3x400Vac ± 15% @ 50-60Hz
32A
MIG - MAG
TIG
MMA
50% 60% 100% 50% 60% 100% 50% 60% 100%
SYN
2,5KHz
500A 450A 400A 500A 460A 400A 500A 450A 400A
5A - 500A
5A - 500A
5A - 500A
8/85V
8/85V
95V
25,8kVA - 23,5kW
23S
1100 x 500 x 1440mm
132,0Kg
16
Wire Feeder WF104
WF104
CODE
€
Power Pulse 402T
001.0117.0000 6540,00
Power Pulse 502T
001.0118.0000 7580,00
Wire Feeder WF104
001.0315.0000 2260,00
Wheels Kit WF
010.0000.0012
66,00
002.0001.0241 230,00
002.0001.0242 350,00
Cooling Unit C.U.09
003.0000.0101 1150,00
kind of torch.
006.0008.0006 379,00
006.0008.0018 690,00
Carrello M
004.0000.0012 595,00
004.0000.0201 180,00
006.0002.0025 140,00
006.0005.0002 152,00
006.0003.0121 200,00
006.0003.0122 160,00
006.0003.0123 200,00
Cable RC03/04/05/06 L=5m
022.0002.0172
50,00
022.0002.0173
56,00
022.0002.0174
67,00
006.0002.0017 140,00
14pins
PUSH PULL KIT 321 PULSE / WF104
010.0000.0039 210,00
006.0002.0011 145,00
Gas regulator FLOWMETE
006.0002.0005
158,00
Feeding Rolls
002.0000.0140
34,00
Suggested composition POWER PULSE 402 HSL AIR
9991,00
Power Pulse 402 HSL + WF104 + Weehl kit WF + Trolley M+
Tool Box VP-01 + Interconnectioncable 70mmq L=4mt AIR
Suggested composition POWER PULSE 502 HSL AIR
11031,00
Power Pulse 502 HSL + WF104 + Weehl kit WF + Trolley M+
Tool Box VP-01 + Interconnectioncable 70mmq L=4mt AIR
3, 2, 1 ... GO!
The 3 simple operations for setting and adjusting welding parameters
ensure the quick setting-up of the machine without the need to
read complicated user manuals, which avoids an unnecessary waste
of time. The large and clearly visible front panel shows all the set
parameters at any given time.
MOTOR DRIVE
Suggested composition POWER PULSE 402 HSL H2O
11004,00
Power Pulse 402 HSL + C.U.09 + WF104 + Wheel Kit WF + Trolley M +
Interconnectioncable 70mmq L=4mt H2O
42VDC
120W
1,0 - 20,0m/min
d
D
12044,00
Suggested composition POWER PULSE 502 HSL H2O
Power Pulse 502 HSL + C.U.09 + WF104 + Wheel Kit WF + Trolley M +
N°4 D=37mm - d=19mm
Fe 0,6 - 1.6mm
Al 0,8 - 3,2mm
FCW 1,0 - 3,2mm
Interconnectioncable 70mmq L=4mt H2O
17
MicroPulse 302 MFK
Bobine da 200mm - 300mm
3 x 400Vac
MicroPulse 302 MFK is a compact, synergic, 3 Phase Inverter Power
Source for MIG-MAG, MMA and Lift TIG Arc welding.
A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires:
– MAT (wire type)
– ø (wire diameter)
– Gas (shielded gas type)
- Welding parameters (wire speed, amps or material thickness)
Pulse HS allows:
Power Focus allows:
4 - Low costs of mechanical preparation of bevels
Processes: MIG/MAG PULSE/SYNERGIC - TIG DC LIFT - MMA
Structure
- Cooling Unit C.U.11 available
- Fan on request and Built-in Air Tunnel protects electronic devices
- 3T Special allows both Hot Start and Crater Filler current setting, for
optimal penetration at start and crater-filling at bead’s end
- Memory locations for welding process repeatability
- Push-Pull torch applicable for MIG aluminum welding
- Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit
MIG MAG Functions
MicroPulse 302 MFK
3x400Vac ± 15% @ 50-60Hz
16A
MIG-MAG
% 40°C
% RT
35%
60%
300A
-
TIG - WIG
100%
50%
60%
230A
200A
250A
60%
100%
-
300A
250A
-
20A - 300A
MMA
100%
40%
60%
240A
210A
250A
220A
190A
-
100%
-
-
100%
-
250A
-
-
250A
5A - 250A
11/60V
10,3KVA -9,7KW
23S
560 x 280 x 390mm
24,0Kg
18
5A - 250A
100%
CODE
MOTOR DRIVE
42VDC
45W
1,5 - 22,0m/min
d
D
n°4 (ø30mm - ø14mm)
Fe 0,8 - 1,2mm
Al 0,8 - 1,2mm
FCW 1,0 - 1,2mm
€
MicroPulse 302 MFK
001.0121.0000 4000,00
Cooling Unit C.U.11
003.0000.0131 1150,00
Trolley 03
006.0002.0042 320,00
SLIDING KIT 5 MicroMAG 302
010.0000.0045 158,00
006.0002.0028
59,00
006.0002.0003
54,00
Torch MIG 36 L= 4m AIR EURO
006.0008.0004 227,00
Torch MIG 240 L= 4m AIR EURO
006.0008.0007 265,00
006.0008.0017 604,00
Torch TIG 26 L= 4m AIR EURO
006.0005.0011 298,00
006.0003.0121 200,00
006.0003.0122 160,00
006.0003.0123 200,00
14pins
022.0002.0172
50,00
022.0002.0173
56,00
022.0002.0174
67,00
010.0000.0040 210,00
006.0002.0011 145,00
Cable RC03/04/05/06 L=5m
006.0002.0005 158,00
ROLL 0.6/0.8 D=30 d=14 V
002.0000.011934,00
ROLL 0.8/1.0 D=30 d=14 V
002.0000.012034,00
ROLL 1.0/1.2 D=30 d=14 V
002.0000.012134,00
ROLL 0.8/1.0 D=30 d=14 U
002.0000.012234,00
ROLL 1.0/1.2 D=30 d=14 U
002.0000.012334,00
ROLL 1.0/1.2 D=30 d=14 VK
002.0000.012434,00
Suggested composition:
5934,00
MicroPulse 302 MFK + C.U.11 + Torch MIG 240 L= 4m AIR EURO +
Earth Cable 35mm2 L=4m + Gas regulator MANOMETRI +
Trolley 03
19
DISTRIBUTOR
WECO srl
Via S. Antonio 22 - Loc. Belvedere
36050 Tezze sul Brenta (Vicenza) - Italy
Tel +39 0424 561 943
fax +39 0424 561 944
info@weco.it - www.weco.it

Cruiser 402 / 502

Transcription

Similar documents

WELD THE WORLD

Cruiser 402AC/DC