angular encoder epo-01 (analog potentiometric)

angular encoder epo-01 (analog potentiometric)

ANGULAR ENCODER
EPO-01 (ANALOG POTENTIOMETRIC)
l for position measurement in the automatic
control, steering and measuring systems
l EPO-01 - analog angular encoder
with potentiometric sensor
l independent settings of “0”
and measuring range
ANGULAR ENCODERS type EPO-01 ARE DESIGNED FOR POSITION MEASUREMENT IN
AUTOMATIC CONTROL, STEERING AND MEASURING SYSTEMS. THEY CONVERT CHANGE
OFTHE TRANSDUCER AXIS ROTATION ANGLE INTO STANDARIZED CURRENT SIGNAL 4÷20
mA. MEASUREMENT OF ANGLE IS REALIZED BY MMEANS OF POTENTIOMETER. AGULAR
ECODERS ARE MADE ON THE BASIS OF CONTEMPORARY TECHNOLOGIES WHICH
GUARANTEE HIGH STABILITY AND LONG-TERM LIFE OF CONVERSION CIRCUIT.
TECHNICAL DATA
- 2-wire power supply
12÷36V DC *
- power consumption
L1 VA
- max. measuring range
0÷300°
- setting of range
50÷100%
- output signal
- characteristic of conversion
4÷20mA
linear, depend of the transducer axis rotation angle
- load resitance
0÷RmaxL1kW Rmax=(Uz-12V)/20mA
- conversion error
L0,5 %
- hystaresis for FSO**
L0,2 %
IP64
- protection degree
- ambient temperature effect for FSO**
- resistance to vibrations
- operating temperature
- mechanical life time
- mass
L±0,15 %/10°C
5G
-40÷80°C
life time 10x106 lub 1x106 depends of version
(see: ORDERING METHOD)
65g
* wires“+” i “-” have the connection with PE (protective earthing terminal) through transils of 63V voltage
** FSO - for maximum range
CONTROLMATICA ZAP-PNEFAL Sp. z o.o.
ul. Krotoszynska 35; PL-63-400 Ostrow Wlkp., Poland
tel.: +48627372250, fax: +48627372724, e-mail: controlmatica@controlmatica.com.pl
www.controlmatica.com.pl
Page 1 of 2
ANGULAR ENCODER EPO-01 (ANALOG POTENTIOMETRIC)
APPLICATION DIAGRAM OF ANGULAR ENCODERS type EPOTerminal strip
BROWN
Angular encoder
EPO-01,
SCREAN
4 - 20 mA
+
Receiver
Power supply
12-36 VDC
Screan of the measuring wire
EPO-03
WHITE
4 - 20 mA
-
DIMENSIONED DRAWING OF THE ANGULAR ENCODER type EPO-01
ORDERING METHOD
TYPE
EPO-01-
NAME
Angular encoder (analog, potentiometric)
ANGULAR ENCODER MEASURING RANGE
CODE1
0 ÷ 300°
01
CODE 2
2
EPO - 01
-
01
-
2
PROPERTIES OF ANGULAR ENCODER
Calss L0,5% life time 1x10
6
EXAMPLE OF PRODUCT DENOTATION
The right of introducing design changes in the products, without deteriorating of its operation parameters, is reserved.
CONTROLMATICA ZAP-PNEFAL Sp. z o.o.
ul. Krotoszynska 35; PL-63-400 Ostrow Wlkp., Poland
tel.: +48627372250, fax: +48627372724, e-mail: controlmatica@controlmatica.com.pl
www.controlmatica.com.pl
Page 2 of 2
June 2010