hand tools

Transcription

hand tools

© 2007 Hertz Equipment Rental Corporation. All rights reserved
800-669-7788
www.hertzequip.com
Tool & Supply Catalog
Rentals z Sales z Service
800-669-7788
Thank You for Choosing Hertz Equipment
Rental to Meet Your Merchandise Needs.
As a trusted name in the equipment rental business, Hertz Equipment Rental has been a leader in providing quality equipment and service to our customers.
With the same commitment we are now able to provide you not only the equipment you need, but the
tools and supplies that are necessary at every jobsite.
With over 30 years of experience and 1000’s of items in stock, our Inside Sales Department in Kansas
City will be able to meet all of your tool & supply needs.
For quotes or inquiries please call 1-800-669-7788 or e-mail us at hertzsupplies@hertz.com.
How to Order
Call Toll Free: 1-800-669-7788 – Our knowledgeable and courteous staff are ready to assist you in
finding what you need.
E-mail us at hertzsupplies@hertz.com – Send an e-mail directly to our sales support staff and they
will respond to you with the information you need.
WE SHIP ANYWHERE IN THE US!
Easy & Convenient Payment Options
•
We accept most major credit cards.
•
CASH or COMPANY CHECK at your local Hertz Equipment Locations.
•
Open up a BUSINESS ACCOUNT by filling out the credit application at the back of this catalog.
Call us at: 8 00-6 6 9-778 8
TOOLS
•
•
•
•
•
•
•
Saws
Drills
Grinders & Sanders
Nailers
Impact Tools
Electric Screwdrivers
Electric Hammers
MATERIAL HANDING
•
•
•
•
•
•
•
CONTRACTORS’ SUPPLIES
•
•
•
•
•
•
Bits
Blades
Abrasives
Grinding Stones
Brushes
Drivers
CONCRETE SUPPLIES
•
•
•
•
•
•
LANDSCAPING
Trimmers
Blowers
Chainsaws
Rakes
Shovels
Hoses
Wheelbarrows
Lutes
Anchors
Edgers
Trowels
Floats
Corner Tools
SAFETY & OUTERWEAR
•
•
•
•
•
•
•
Helmets
Gloves
Respirator Equipment
Flags
Rain Gear
Ear Protection
Safety Glasses
INTRO
•
•
•
•
•
•
•
Chains
Hoists
Chain Accessories
Ladders
Load Binders
Wire Load Slings
Hand Trucks
MISCELLANEOUS
•
•
•
•
•
•
•
•
Oils & Lubricants
Chalk Lines & Chalk
Marking Tools & Paint
Cleaners, Towels, Wipes
Trash Bags & Containers
Cleaning Supplies, Mops, Brooms
Flashlights
Padlocks & Toolboxes
V i s i t u s a t : w w w. h e r t z e q u i p . c o m
i
TABLE OF CONTENTS
LIGHT EQUIPMENT
MATERIAL HANDLING
25-38
CONCRETE & MASONRY
39-60
POWER TOOLS
61-82
TABLE OF CONTENTS
BITS, BLADES & ABRASIVES
83-112
HAND TOOLS
113-186
LANDSCAPING
187-196
GENERAL SUPPLIES
197-242
SAFETY SUPPLIES
243-276
WORKWEAR
277-292
INDEX
293-298
CREDIT APPLICATION
299-300
GSA
ii
1-24
301
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
HD 4 GALLON ELECTRIC AIR COMPRESSOR –
DEWED55153
HD 4 GALLON GAS AIR COMPRESSOR –
DEWED55250
• 16.2 cfm delivered
@ 100 PSI for high
volume applications
• 4.5 cfm delivered @ 100 PSI pump enables
speedy recovery
• 4.5 cfm delivered @ 100 PSI enables speedy
recovery
• 2.75 max hp, 1.2
hp continuous
• 4 hp Honda OHV GX gas engine
• Oil lubricated
pump improves
durability
• Cast iron cylinder
• Quad cylinder, cast
iron, oil lubricated
pump
• Cast iron cylinder
• Low oil shut off provides greater engine
protection
• Dual wheels make maneuvering easier
• High flow regulator
• 4 gal twin stack tank design
• Convenient, portable
compressed air-no electricity required
• High flow regulator for
increased performance
HD 8 GALLON ELECTRIC AIR COMPRESSOR –
DEWED55170
DEWED55270
• 4.5 cfm delivered @ 100 PSI pump recovers
in under 15 seconds
• 6.5 cfm delivered @
100 PSI enables quick
recovery
100 PSI for quick
recovery
• 1.5 hp, twin cylinder,
cast iron, oil lubricated pump
• Twin cylinder, cast
pump
• Oil lubricated pump
ball valve drain allows
for quick and thorough tank draining
• Low profile design for easy maneuverability
• 5.5 hp Honda OHV GX gas engine
• On/Off constant run design for reduced breaker tripping
protection
• High flow regulator for increased performance
• Semi-pneumatic tire improves worksite
mobility
• Automatic idle control for reduced fuel
consumption
• 2.75 max hp, 1.2 hp
continuous
• New ergonomic design
for easy portability
• ASME coded 4 gal OSHA recognized tank
• CCSAUS approved
• Ball valve drain allows for quick and thorough
tank draining
tank draining
HAND TOOLS
HD 4 GALLON SINGLE TANK ELECTRIC AIR
COMPRESSOR – DEWED55155
• ASME coded 17 gal OSHA recognized tank
consumption
BITS, BLADES
& ABRASIVES
• Low oil shut off
POWER TOOLS
• Dual soft start valves assist in cold weather
start up
tank draining
CONCRETE & MASONRY
• 8 hp Honda OHV
GX gas engine
• Oil lubricated pump improves durability
MATERIAL HANDLING
DEWED55275
LIGHT EQUIPMENT
AIR COMPRESSOR
• Semi pneumatic tire improves worksite
mobility
DEWED55271
• Quad cylinder, cast
pump
• 8 hp Honda OHV GX gas engine
tank draining
• Semi pneumatic tire improves worksite
mobility
WORKWEAR
consumption
SAFETY SUPPLIES
protection
GENERAL SUPPLIES
100 PSI for high
volume applications
LANDSCAPING
consumption
1
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
AUGERS & AUGER BITS
1 MAN AUGER – GEEEM210
AUGERS
• Unique butterfly
operator’s handle
• Loop style operator
handle which folds
easily for transport
• 33 cc Tecumseh
two-cycle engine
2 MAN AUGER – GEEEM330H
• Precision gear transmission
• 49 cc Tecumseh
two-cycle engine
M210 AUGER BITS
M330H AUGER BITS
• GEEE2135-4E - 4”
• GEEE4400-8E3 - 8”
• GEEE2135-6E - 6”
• GEEE4400-10E3 - 10”
• GEEE2135-8E - 8”
BREAKERS
ELECTRIC BREAKER – WACEEH27
• 115V, Hex 1.1 x 6”
• 1,050 bpm
• 28 ft-lbs
• 2.1 hours run time
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Super quiet muffler
2
• Lightweight compact frame
• Integral lifting eye to accommodate 3” hook
• Automatic low oil shutdown
BREAKERS
MCH-3 CHIPPING HAMMER –
SULE68252241-001
MPB-30A PAVING BREAKER – SULE68253074
• 17-3/4 lbs, 15-1/4” long
• 35-1/2 lbs, 23” long
• 35-1/2 lbs, 23” long
• .680 round, .580 hex
• 7/8” HX x 4-1/4”
• 1” HX x 4-1/4”
• 2280 bpm
• 1850 bpm
• 1850 bpm
• 3/8” NPT or 7/8”-24
• 3/8” NPT
• 3/8” NPT
• Four bolt backhead
• High wear parts reduced
• D-handle
• No tappet system
• Minimal lubrication required
• Smoother operation
• One piece, non-protrusive
housing
housing
• Rotatable exhaust deflector
• Direct impact piston
MPB-35C PAVING BREAKER – SULE68253092
• 39 lbs, 25-1/2” long
• 69-1/2 lbs, 26-1/2” long
• 92 lbs, 27-1/2” long
• 1” HX x 4-1/4”
• 1-1/8” HX x 6”
• 1-1/8” HX x 6
• 1200 bpm
• 1360 bpm
• 1380 bpm
• 3/8” NPT
• 3/4” NPT
• 3/4” NPT
• One piece, non-protrusive housing
housing
housing
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
PAVING BREAKER – INRE51296358
• 1-1/8” x 6” chuck size with hex collar
• 1-1/8” x 6” chuck size with hex collar
• 1” x 4-1/4” Chuck size hex with collar
• 69 lbs
• 86 lbs
• 40 lbs
• 2-1/16” piston bore
• 5-3/4” piston stroke
• 1250 bpm
• 1250 bpm
• 1250 bpm
• State of the art non-metallic
materials
• State of the art
non-metallic materials
• Internal lubricator, drop-in valve cartridge,
Powr-Stok piston cycle
• Internal lubricator, drop-in
valve cartridge, Powr-Stok piston cycle
• One piece housing eliminates side rods, springs
and backhead bolts
• One piece breaker housing, four bolt
backhead
• One piece breaker housing, four bolt
backhead
• Ergonomically designed
• Built in lubricator
• Ball valve throttle
• Hardened alloy steel cylinder
CHIPPER – INRE3A2SA
• 9” piston stroke
• Round shank oval collar
• 900 bpm
• 1725 bpm
• Plain chisel retainer
• New, improved piston with
shock resistant material
• Strong forged steel throttle
handle for durability
• Piston and barrel design provides better air
pocket cushion between piston and accessory
• Plated piston for reduced
wear and extended life
• Lock assembly locks retainer nut onto barrel
for positive accessory retention
• Barrel is grooved for use with retainers
BITS, BLADES
& ABRASIVES
RIVET BUSTER – INRE9001
POWER TOOLS
BUSTERS & CHIPPERS
• Long nozzle section for long life
HAND TOOLS
• Forged steel handle
COMPACTION PLATE COMPACTORS
PLATE COMPACTOR – MULEMVC88GH/W
• 3350 lbs of compaction force
• 6 hp Robin engine
• 6 hp Honda engine
• 5.5 hp Honda engine
• Smart choice for flatwork,
trenches and driveways
• Smart choice for flatwork, trenches and
driveways
• The most technically
advanced plate compactor on the market
• Solid high strength steel
base plate design has
curved edges for superior performance and
smooth turns on asphalt
• Protective engine guard,
sealed belt cover to
keep rock and dirt out
of the belt
• One way plate compactor has
17” x 22.4” plate
• One way plate compactor has
17” x 22.4” plate
• Convenient oil drain, self cleaning plate design
and four lifting handles
GENERAL SUPPLIES
PLATE COMPACTOR – MULEMVC77H
LANDSCAPING
PLATE COMPACTOR – MULEMVC77
• Solid high strength steel
base plate design has
curved edges for superior
performance and smooth
turns on asphalt
CONCRETE & MASONRY
PAVING BREAKER – INREMX90A
MATERIAL HANDLING
PAVING BREAKER – INREMX60A
LIGHT EQUIPMENT
BREAKERS
SAFETY SUPPLIES
WORKWEAR
3
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
PLATE COMPACTOR – MULEMVC90H
PLATE COMPACTOR – MULEMVC90L
• 5.5 hp Robin engine
• Durable steel enclosed
and ribbed base plate
eliminates dirt and rock
build up
• Durable steel enclosed
and ribbed base plate
eliminates dirt and rock
build up
• Engine oil alarm that
shuts the machine down
if oil falls below a safe level
• Heavy-duty vibrator assembly
• Engine oil alarm that
shuts the machine down
if oil falls below a safe
level
• Durable water distribution system
• Heavy-duty vibrator assembly
• Reversible shock mounted handle
• Durable water distribution system
• Reversible shock mounted handle
VIBRATORY PLATE COMPACTOR –
WACEVP1550AW
WACEWP1550A
WACEWP1550AW
• 3375 lbs with water tank
• 3375 lbs
• 3375 lbs with water tank
• 23” x 19.5” base plate
• 20” lowest working height
• 20” lowest working
height
• Designed for compaction
in confined areas
COMPACTION RAMMERS
RAMMER – WACEBS50-2I
RAMMER – WACEBS60-4
• Oil injected vibratory rammer
• 4 cycle vibratory rammer
• Unique oil injection system,
eliminates spark plug fouling and carbon build-up
• Unique oil injection system, eliminates spark
plug fouling and carbon
build-up
• Unique oil injection system, eliminates spark
plug fouling and carbon
build-up
• No-mix system, amazing
fuel to oil ratio of 120:1
• Low oil shutdown switch
• 4 hp, 2 cycle
• Wacker’s exclusive WM
90 engine
• Wacker’s exclusive WM
80 engine
• 11” x 13” shoe size
• 2.8 hp, 4 cycle
• 3.1 hp, 2 cycle
• 26.5” L x 13.5” W x 38” H
• 26.5” L x 13.5” W x 38” H
• 26.5” L x 13.5” W x 38” H
• Wacker’s exclusive WM 80
engine
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Designed for compaction
in confined areas
4
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
LIGHT EQUIPMENT
COMPACTION RAMMERS
MATERIAL HANDLING
• Unique oil injection system,
eliminates spark plug fouling and carbon build-up
CONCRETE & MASONRY
• Mechanical shut off quickly
stops handle rotation when
released
• Height adjustable control
handle and posi-lock throttle
• 5.5 hp, Honda 4 cycle
• 0-15 degree pitch range
• 72” L x 36” W x 36” H
POWER TOOLS
COMPACTION TAMPERS
TAMPER – INRE441A2
• 1-5/8” barrel bore
• 2” barrel bore
• 1550 bpm
• 1750 bpm
• 5-3/4” butt diameter
• 5-3/4” butt diameter
• Compact for backfill
tamping between foundations and around
other jobsite obstructions
• Compact for backfill tamping between foundations and around other jobsite obstructions
• Plated piston for excellent wear resistance
• Dual action sand wiper front end keeps dirt
out of barrell
• Plated piston for excellent wear resistance
HAND TOOLS
• Dual action sand wiper front end keeps dirt
out of barrell
BITS, BLADES
& ABRASIVES
TAMPER – INRE341A2M
COMPACTION TAMPERS
TAMPER – MULEMT84F
• 2900 lbs impact force, 695 bpm
• 3950 lbs impact force, 698 bpm
• Features extra heavy-duty
shock absorbers and precision balance to ensure
operator comfort and
extended unit life
• Multiquip’s hardest hitting
gasoline rammer
• Ideal for backfill compaction of underground
trenches for water, gas,
sewer and utility lines
• Low noise applications
and its octagonal shoe
lowers vibration during use on small asphalt
applications
• Fit for basic rammer applications, especially those
where noise is a concern
• Overwhelming choice of
contractors
• Built for high production
jobs: trenches, retaining
walls and pads
GENERAL SUPPLIES
TAMPER – MULEMT65H
• 2250 lbs impact force,
695 bpm
LANDSCAPING
• Durable, easy to use and portable
SAFETY SUPPLIES
• Steel plate on the shoe bottom that wraps
around to protect the sides of the shoe
WORKWEAR
5
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
COMPACTION TAMPERS
• 3100 lbs impact force,
680 bpm
• 3.5 hp Robin Engine
• Tailor made for almost
any demanding compaction application, particularly for contractors
working in noise-sensitive areas
• Laminated wood and steel shoe absorbs and
withstands shock and stress
CONCRETE EQUIPMENT
ACCESSORIES
CONCRETE BOMBS
• ADVS1001 - 5 gal
BITS, BLADES
& ABRASIVES
• ADVS1004 - 1 qt bottle
• Prevents concrete
build-up on all tools
used in concrete
• The bomb will even loosen existing build-up
LANDSCAPING
HAND TOOLS
CONCRETE EQUIPMENT MIXERS
CONCRETE MIXER – STOE105CM-8H
• 10 cu ft, 3 bag capacity
• 6 cu ft, 1-1/2 bag capacity
• 9 cu ft, 3 bag capacity
• 8 hp Honda
• 8 hp Honda
• 8 hp Honda
• 56” wide axle with
cantilever springs
• 46” wide axle
• 24” diameter handwheel
• High speed 4.80 x 12
(20”) tires
• High speed B78 x 13
(25” dia) turnpike tires
• 24” dia. handwheel
discharge
• Chain drive and
dump lock
• Long life drive gears and
dump lock
• 36” diameter thick steel drum
• 24” diameter handwheel
• Chain drive and dump lock
SAFETY SUPPLIES
GENERAL SUPPLIES
MORTAR MIXER – STOE1285PM-11HP
MORTAR MIXER – STOE655PM-8HP
MORTAR MIXER – STOE855PM-8H
• 12 cu ft, 3 to 4 bag
capacity
• 6 cu ft, 1-1/2 bag capacity
• 8 cu ft, 2-1/2 to 3 bag
capacity
• 11 hp Honda
• Front post hand
clutch
• 8 hp Honda
• Extendible axle
(34” to 46”)
• Extendible axle
(34” to 46”)
• High speed
4.80 x 12 (20”) tires
• High speed B78 x 12 (25” dia) turnpike tires
• 8 hp Honda
• 56” axle/cantilever
springs/safety chain
• Patented “Power Blend” mixing action
• Optional curved steel blades for plaster and
fireproofing
• Front post hand clutch
• Rubber blades and safety chain standard
• Rubber blades and safety chain standard
WORKWEAR
• Lift away safety guard
6
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
CONCRETE MIXERS – WHMEMC64PH8
MIX-N-GO – WHMEMC3SE
• 9 cu ft steel drum
• 6 cu ft poly drum
with V-belt drive
• 3/4 hp, 120 VAC single
phase electric motor
• Manual dump action
• Generous 21” opening
for simple loading and
unloading of material
• EasyClean drum,
remove dried concrete in minutes with a few taps of a
rubber mallet
• 3 cu ft, (1/2 bag) mixer
capacity
• Steel drum, manual
dump
• Ideal for homeowners
and small contractors
• Fits in the trunk of a car
PLASTER/MORTAR MIXER – WHMEWM70SH8
• 13 hp Honda engine,
hydraulic drive
with V-belt drive
with V-belt drive
• 3-1/2 to 4 bags mixer capacity
• 2-1/2 to 3-1/2 bags
mixer capacity
• 1-1/2 to 2-1/2 bags
mixer capacity
• Heavy-duty safety grate with built in bag cutter, durable paddle shaft, cast iron paddle
arms with wiper blades
• Features double
sealed bearings with spring loaded greasable
shaft seals
• Built in safety relief system that disengages
itself should an object become wedged in
the drum
• Engine mounted solid to base to reduce
vibration
with V-belt drive
with V-belt drive
• 2-1/2 to 3-1/2 bags
mixer capacity
• 1-1/2 to 2-1/2 bags
mixer capacity
• 14 gauge steel engine cover to withstand the
elements and rigors of the daily routine
• 14 gauge steel engine cover to withstand the
elements and rigors of the daily routine
• Up front blade engagement and dump controls
for easy operation
MIXER ACCESSORIES
MIXER ACCESSORIES
GENERAL SUPPLIES
CONCRETE EQUIPMENT
LANDSCAPING
PLASTER/MORTAR MIXER –
WHMEWM700P-H8
HAND TOOLS
PLASTER/MORTAR MIXER – WHMEWM90SH8
BITS, BLADES
& ABRASIVES
PLASTER/MORTAR MIXER –
WHMEWM900PH8
POWER TOOLS
PLASTER/MORTAR MIXER – WHMEWM120PH
CONCRETE & MASONRY
• Comes with stand that allows the mixer to
rotate 360 degrees and can also be used as a
wheelbarrow to transport concrete
MATERIAL HANDLING
CONCRETE MIXERS – WHMEMC94SH8
LIGHT EQUIPMENT
CONCRETE EQUIPMENT MIXERS
• WHMPEBC1 - 56” hitch ball
• WHMPHBC1 - 35” ball coupler
• WHMPHLC1 - 35” loop coupler
SAFETY SUPPLIES
• WHMPELC1 - 56” loop ball
WORKWEAR
7
CONCRETE EQUIPMENT
POWER BUGGIES
POWER BUGGIES – WHMEWBH-16
POWER BUGGIES – WHMEWBH-16E
• 13 hp Honda engine, recoil start
• 13 hp Honda engine, electric start
• Heavy-duty frame with
low center of gravity
BITS, BLADES
& ABRASIVES
• Heavy-duty frame with
low center of gravity
• Increased stability and
traction
• 16 cu ft capacity
• Increased stability and
traction
• Travels up to 7.25 mph
• 16 cu ft capacity
• Infinitely variable, fully hydraulic drive system
for smooth and steady operation
• Travels up to 7.25 mph
• Removable tires for easy access to narrow
work areas
• Removable tires for easy access to narrow
work areas
SAWS & ACCESSORIES
12” DIAMOND CONCRETE CHAINSAW –
ICSE613GC
14” DIAMOND CONCRETE CHAINSAW –
ICSE633G
• 2 stroke single cylinder air cooled engine
• 2 stroke single cylinder air cooled engine
• 5.7 hp, 4.9 cu in
displacement
• 6.5 hp, 6.2 cu in displacement
• ICSS71704 - 12”,
Twinmax-29
• 25:1 fuel ratio
• ICSS71486 - 14”, Twinmax-32
• 25:1 fuel ratio
• Minimum 20 PSI
water supply
• ICSS71705 - 14”, Twinmax Plus
• Minimum 20 PSI
water supply
HAND TOOLS
• Infinitely variable, fully hydraulic drive system
for smooth and steady operation
CONCRETE EQUIPMENT
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
REPLACEMENT CHAINS
• ICSS73600 - 14” fits ICSE633G
PREMIUM PRO REPLACEMENT CHAIN –
ICSS71608
REPLACEMENT GUIDE BARS
• ICSS71395 - 12” fits
ICSE613GC saw
• Fits ICSE633G
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• ICSS71400 - 12” fits
ICSE613GC saw
8
CONCRETE EQUIPMENT SAWS
CUTQUIK – CRAETS400
CUTQUIK – CRAETS400-14
• 12”
• 14”
• 14”
• 3.9 cu in, 64 cc, 9700 rpm, 20mm arbor
• 3.9 cu in, 64 cc, 9700 rpm, 20mm arbor
• 6.0 cu in, 98.5 cc, 9200 rpm, 20mm arbor
• 3 stage advanced air
filtration system
• 3 stage advanced air
filtration system
• New X2 long term filtration system
• Reliable electronic
ignition
ignition
• Fuel efficient stratified charge engine
• IntelliCarb compensating carburetor
• Semi automatic belt tension
• Fully enclosed starter mechanism
• ElastoStart starter handle and
decompression valve
decompression valve
• Sealed ball bearings with two piece precision
machined crankshaft
• Reversible cutting arm
• Standard water attachment
decompression valve
• Reversible wheel guard for inboard or outboard cutting
• Water attachment kit included
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
LIGHT EQUIPMENT
• 6.77 cu in, 111 cc,
8400 rpm, 20mm
arbor
• 6.77 cu in, 111 cc,
8400 rpm, 20mm
arbor
ignition
ignition
• 3 stage advanced air filtration system
• 3 stage advanced air filtration system
decompression valve
decompression valve
CONCRETE & MASONRY
MATERIAL HANDLING
CUTQUIK – CRAETS760
POWER TOOLS
WALK-BEHIND CONCRETE SAW – TAREC00087
• GM2051
• MC18
• 5 hp Baldor electric motor
• 13 hp Honda, 18” blade
guard
• 20” blade capacity, 8” max
depth of cut
• Screw feed model
• Electric motor operates on a
run and start capacitor
• Raises and lowers the
blade quickly and easily
• Only two pivot points for reduced saw
maintenance
• On/off switch conveniently located
• Features hard case treatment for strength and
rust resistance
HAND TOOLS
• Cutting head pivots on bearings
BITS, BLADES
& ABRASIVES
GUARDMATIC MASONRY SAW –
TARE74091401
• “X” braced steel frame resists flexing
• Powder coat paint for protection against
scratches and rust and corrosion
LANDSCAPING
CONCRETE EQUIPMENT
SCREEDS & ACCESSORIES
BLACK BEAUTY VIBRATING SCREED –
ADVE9800H
• Throttle control allows
fingertip adjustment
of vibration
• Rugged cast aluminum parts
BLACK BEAUTY SCREED BAR – ADVS9807A
• 12’ length
• 5’ length
• Aluminum extruded
equilateral triangle bar
• Aluminum extruded
equilateral triangle bar
• Will not warp, bend
or twist
• Will not warp, bend
or twist
• With SDL clamp
• With SDL clamp
• Adjustable handle allowing you to stand erect
• Completely enclosed eccentric weight
for vibration
SAFETY SUPPLIES
• Easy disconnect for transporting or changing
bar lengths
GENERAL SUPPLIES
• 4 cycle Honda engine
(gas only)
BLACK BEAUTY SCREED BAR – ADVS9805
WORKWEAR
9
LIGHT EQUIPMENT
LIGHT EQUIPMENT
CONCRETE EQUIPMENT
SCREEDS & ACCESSORIES
MATERIAL HANDLING
SILVER BEAUTY VIBRATING SCREED –
ADVE9900H
• 4 cycle Honda engine
(gas only)
• Throttle control allows
fingertip adjustment
of vibration
• Easy disconnect for transporting or changing
bar lengths
• Adjustable handle allowing you to stand erect
• Completely enclosed eccentric weight
for vibration
CONCRETE EQUIPMENT
TROWELS & ACCESSORIES
WALK-BEHIND TROWEL – WHMEBA48H
WALK-BEHIND TROWEL – WHMEJA45H
• 48”, 4 blade
• 36”, 4 blade
• Honda engine
• Centrifugal clutch
• Centrifugal or
hand clutch
• 65-140 rotor rpm
• Handle sold
separately
WALK-BEHIND TROWEL-ACCESSORIES
• 60-100 rotor rpm
• WHMSC464 - 8” x 18” combo blades
• Handle sold
separately
• WHMSC844 - 8” x 14” combo blades
• WHMSF400 - 6” x 18” finish blades
• WHMSF900 - 6” x 14” finish blades
WALK-BEHIND TROWEL-ACCESSORIES –
WHMSQPHJB
WALK-BEHIND TROWEL-ACCESSORIES –
WHMSSTHJB
• Quick pitch handle
• Standard handle
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• Rugged cast aluminum parts
SAFETY SUPPLIES
GENERAL SUPPLIES
CONCRETE EQUIPMENT
TROWELS
WALK-BEHIND TROWEL – WACECT-36ADP
WALK-BEHIND TROWEL – WACECT36ADT
WALK-BEHIND TROWEL – WACECT48ADP
• 36”, 4 blades, Pro-Shift blade system
• High production easily operated
• 36”, 4 blades, twist
pitch blade system
• 48”, 4 blades, Pro-Shift
blade system
• Ideal for floating and finishing concrete
surfaces
• High production
easily operated
• High production
easily operated
• Mechanical shut off quickly stops handle
rotation when released
• Ideal for floating and
finishing concrete
surfaces
finishing concrete
surfaces
• Mechanical shut off
quickly stops handle rotation when released
• Mechanical shut off
quickly stops handle rotation when released
• Height adjustable control handle and
posi-lock throttle
posi-lock throttle
• 8 hp, Honda 4 cycle
• 8 hp, Honda 4 cycle
• 86” L x 48” W, 41” H
• 86” L x 48” W, 41” H
posi-lock throttle
WORKWEAR
• 5.5 hp, Honda 4 cycle
10
• 72” L x 36” W x 36” H
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
LIGHT EQUIPMENT
CONCRETE EQUIPMENT
TROWELS
WALK-BEHIND TROWEL – WACECT48ADT
MATERIAL HANDLING
• 48”, 4 blades, Twist
pitch blade system
• High production easily
operated
finishing concrete
surfaces
CONCRETE & MASONRY
• Powerful universal motor with protective
insulation
• Protective hood made of shock resistant
plastics
• Practically vibration free
POWER TOOLS
DEMOLITION TOOLS
MDT-22 DEMOLITION TOOL – SULE68255010
• 24.7 lbs, 20” long
• 7/8” HX x 3-1/4”
• 1450 bpm
BITS, BLADES
& ABRASIVES
• 3/8” NPT
• Two bolt backhead
• D-handle
• Quick change latch retainer
HAND TOOLS
• Rotatable exhaust deflector
DIGGERS
• 7/8” x 3-1/4” shank size
with hex collar
• 7/8” x 3-1/4” shank size
with hex collar
• Latch retainer type
• Sleeve retainer type
• 4” piston stroke
• 1-11/16” bore
• 1-11/16” bore
• 2350 bpm
• 1850 bpm
• Lightweight for medium and horizontal use
• Medium weight for medium density earth and
light demolition
• Extra long nozzle for reduced wear and
long life
GENERAL SUPPLIES
DIGGER – INRE95A1
LANDSCAPING
DIGGER – INRE93LA1
• Extra long nozzle for reduced wear and
long life
5.5 HP HONDA ENGINE – HONEGX160K1QX2
8 HP HONDA ENGINE – HONEGX240K1QXC
13 HP HONDA ENGINE – HONEGX390K1QXC
• 5.5 hp, OHV horizontal
shaft engine
• 8 hp, OHV horizontal
shaft engine
• 13 hp, OHV horizontal
shaft engine
• Electronic ignition
• Oil alert
• Oil alert
• Oil alert
SAFETY SUPPLIES
ENGINES
WORKWEAR
11
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
GENERATORS
1000 WATT GENERATOR – HONEEU1000
2000 WATT GENERATOR – HONEEU2000I
• 1.8 hp
• 3.5 hp
• 120V, 1000W max,
900W rated
• 120V, 2000W max,
1600W rated
• Recoil start
• Recoil start
• 3.8 hrs run time
• 4 hrs run time
• Super quiet generator
• Super quiet generator
GENERATORS
2500 WATT GAS GENERATOR – GP2500A
• 2500 watt
• 3700 watt
• 5600 watt
• 5.5 hp Honda,
recoil start
• 8 hp Honda, recoil start
• 5.2 fuel tank capacity
• 11 hp Honda, recoil
start
• .975 fuel tank cap
5600 WATT GAS GENERATOR – GPS5600A
9700 WATT GAS GENERATOR – WACEGS9-7V
• 5600 watt
• 9700 watt
• 12 hp Honda,
electric start
• 18 hp, Vanguard Storm,
electric start
• 12,000 rpm
• 3 phase high frequency
• 49.2 ft supply cable
GENERATORS
2900 WATT GAS GENERATOR – DEWEDG2900
• 5.5 hp Honda, OHV
GX engine
• 8 hp Honda, OHV GX engine
• 11 hp Honda, OHV GX engine
• High amp surge
capacity
• Maintenance free, brushless alternator
• Maintenance free,
brushless alternator
• High amp surge
capacity
• Maximum 120V
power switch
• High amp surge
capacity
• Maximum 120V
power switch
• Idle control saves fuel
• Idle control saves fuel
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
12
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
3600 WATT GAS GENERATOR – MULEGA3-6HZ
6000 WATT GAS GENERATOR – MULEGA6H
• 2500 watt, 5.5 hp
Honda
• 3600 watt, 8 hp Honda
• Automatic idle that reduces fuel consumption
during periods of no load
• Generates 6 kW maximum/5 kW continuous
power
• Lightweight and easy to
transport
• Produces up tp 2.2 kW
continuous output
• Steel fuel tanks with a
sight gauge
• Full power switch
• Perfect for a wide variety of applications
• At full load, the 201 pound GA-6H will run for
5.5 hours on a full tank
6000 WATT GAS GENERATOR – MULEGA6HE
9700 WATT GAS GENERATOR – MULEGA9-7HE
GENERATOR ACCESSORIES
• Silent type muffler to
reduce noise levels
• Generates 9.7 kW maximum/8.4 kW continuous power
• MULSWKT97 - Wheel
kit for MULEGA9-7HZ
• Full-featured control panel
• Heavy-duty pipe frame and shock mounts
• Extremely quiet, emitting only 74dBA at 23 ft
• Runs for six hours on a full tank at full load
• Low oil shutdown, fuel
gauge and circuit breaker
• Built with a heavy-duty pipe frame
HIGH CYCLE GENERATOR – MULEGDP5H
• Recoil start, 11 hp Honda engine
• Produces 3.6 kW of continuous 120/240 volt
60 cycle power
• Integral lifting bail
• Includes numerous standard features such as
a voltmeter, low-oil shutdown, fuel gauge and
automatic idle control
PORTABLE WELDER/GENERATOR –
MULEGAW180HE
• 50-180 amp rated voltage-welder
• 3 kW-generator
with push button electric start and recoil
backup
HAND TOOLS
• Simultaneously
produces standard
60 Hz power and
180 Hz power for
“high cycle” concrete vibrators
• 10 gal fuel tank
BITS, BLADES
& ABRASIVES
• Recoil and electric starting system
POWER TOOLS
• USFS-approved spark
arrestors
CONCRETE & MASONRY
• Voltmeter which allows
the operator to quickly tell whether the unit is
producing the correct voltage
• 100 percent copper windings
MATERIAL HANDLING
2500 WATT GAS GENERATOR – MULEGA2-5H
LIGHT EQUIPMENT
GENERATORS
• Arc force control
• Can be simultaneously used as a welder and
generator
LANDSCAPING
• Idle control and low oil shutdown
GENERATORS
6500 WATT GAS GENERATOR –
TSUETPG-6500
• 2700 watt
• 5500 watt
• 6500 watt
• Honda GX160K1VED2
• Honda GX340K1ED6
• Honda GX390K1EDD2
• 5.5 hp, recoil start
• 11 hp, recoil start
• 4.5 gal tank cap., 5.7
hrs run time
• 4.5 gal tank cap., 5.3
hrs run time
• 13 hp recoil
electric start
SAFETY SUPPLIES
TSUETPG-5500
GENERAL SUPPLIES
TSUETPG-2700
WORKWEAR
13
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
HEATERS
KEROSENE HEATER – MAHEB55BT
KEROSENE HEATER – MAHEB115DT
KEROSENE HEATER – MAHEM125AT
• 55,000 BTU
• 115,000 BTU
• 125,000 BTU
• 1280 sq ft heating area, 180 cfm hot air flow
• 5 gal fuel tank, .44 gal consumption
per hour
• Automatic fuel shutoff
• 9 gal fuel tank,
.85 gal consumption
per hour
• Thermostatically
controlled
• Built in thermostat
• Ergonomic comfort
grip handle
• ARL Listed
• 19 gauge extension cord cleats for 50’
• ARL listed
KEROSENE HEATER – MAHEB155DT
• 155,000 BTU
• 170,000 BTU
• 200,000 BTU
controlled
controlled
• ARL certified
• ARL certified
grip handle
• AGA listed
• ARL listed
• 20 gauge extension cord cleats for 50’
KEROSENE HEATER – MAHEB350D
KEROSENE HEATER – MAHEB600D
OUTDOOR PROPANE TANK TOP HEATER –
MAHETT15
• 350,000 BTU
• 600,000 BTU
• 10,000-12,000-15,000 BTU
• 14100 sq ft heating
area, 3300 cfm hot
air flow
• Needs match for ignition
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• 13.5 gal fuel tank, 1.14 gal consumption
per hour
• 30 gal fuel tank, 2.5
gal consumption
per hour
• Propane tank not included
• 36 gal fuel tank, 4 gal
consumption per hour
• ARL listed
• AGA listed
PORTABLE CONVECTION HEATER –
MAHETC200VA
PROPANE FORCED AIR HEATER – MAHEBLP30
PROPANE FORCED AIR HEATER –
MAHEBLP100
• 30,000 BTU
• 100,000 BTU
• Piezo ignition
• 700 sq ft heating area,
175 cfm hot air flow
370 hot air flow
• Piezo ignition
• Piezo ignition
• Propane tank not
included
• AGA listed
• AGA listed
MAHEBLP170VT
MAHEBLP375AT
OUTDOOR PROPANE TANK TOP HEATER –
MAHETT30
• 170,000 BTU
• 375,000 BTU
• 30,000 BTU
• 3500 sq ft heating area
• Needs match for ignition
1500 cfm hot air flow
• AGA listed
grip handle
• 200,000 BTU adjustable
capacity output/hr
• 18 gauge extension
cord cleats for 50’
WORKWEAR
SAFETY SUPPLIES
• ARL certified
14
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
LIGHT EQUIPMENT
HEATERS
ELECTRIC STEAM’N HEAT RADIANT HEATER &
HUMIDIFIER – MAVS5460
• Exclusive! Safety-Lock
Guard
• Automatic overheat
alarm and shutoff
• Fragrance freshener
• All metal cabinet with
carrying handle
• Convection heat up to
5,122 BTU’s
• 1320 & 1500 watt
power setting
MATERIAL HANDLING
• 800 & 1500 watt power setting
PORTABLE ELECTRIC HEATER – MAVS1590
CONCRETE & MASONRY
• Tip-over and overheat shut-off
• Cool touch cabinet
• Thermostat control with FreezeGuard setting
• Replaceable quartz heating elements
PRESSURE WASHERS
• 3000 PSI
• 3200 PSI
• Honda 5.5 hp,
recoil start
• Honda 9 hp,
recoil start
• Honda 11 hp,
recoil start
• Legacy pump
• General pump
• Legacy pump
• Belt drive
• Belt drive
• Belt drive
• Rugged steel chassis
• Totally enclosed belt guard
• No-mar blue high pressure hose
COLD WATER PRESSURE WASHER-BG SERIES
GASOLINE POWERED – SHREBG-373537
COLD WATER PRESSURE WASHER-BR SERIES
GASOLINE POWERED – SHREBR-353237
COLD WATER PRESSURE WASHER-BR SERIES
GASOLINE POWERED – SHREBR-373537
• 3500 PSI
• 3200 PSI
• 3500 PSI
• Honda 13 hp,
recoil start
• Honda 11 hp,
recoil start
• Honda 13 hp,
recoil start
• Legacy pump
• Legacy pump
• Legacy pump
• Belt drive
• Belt drive
• Belt drive
• Rugged steel roll cage
• Rugged steel roll cage
• Heavy-duty inlet water filter
• Heavy-duty inlet water filter
COLD WATER PRESSURE WASHER-DG SERIES
GASOLINE POWERED – SHREDG-252737
HOT WATER PRESSURE WASHER SGP-XL
SERIES GASOLINE POWERED –
SHRESGP-353037
HOT WATER PRESSURE WASHER SGP-XL
SERIES GASOLINE POWERED –
SHRESGP-353037E
• 2700 PSI
• 3000 PSI
• 3000 PSI
• Honda 6.5 hp,
recoil start
• Honda 11 hp,
recoil start
• Honda 11 hp,
electric start
• Legacy pump
• Legacy pump
• Legacy pump
• Direct drive
• Direct drive
• Direct drive
• Diesel or fuel oil
heated with automatic ignition control
• Diesel or fuel oil
heated with automatic ignition control
• Compac design with roll cage
• Compac design with roll cage
LANDSCAPING
• 2000 PSI
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
15
LIGHT EQUIPMENT
LIGHT EQUIPMENT
RATCHET
RATCHET WRENCH – INRE1111I
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 1/2”
• Knuckle saver
reactionless air
ratchet
• Up to 50 ft-lbs
of torque
• Rear exhaust directs air away from work
• External grease fittings
PUMPS
SUBMERSIBLE PUMP 2” – WACEPS2-500
SUBMERSIBLE PUMP 2” – WACEPSA2-500
TRASH PUMP 2” - WACEPT2A
• 110V electric
• 110V electric, automatic
• 62.4 gpm max
discharge, 17 PSI
• 62.4 gpm max
discharge, 17 PSI
• 4 cycle, single cylinder
Honda gasoline engine
• Up to .2” solid size
• Up to 1” solid capacity
• Built in thermal
protection
• Hardened ductile iron
impeller and volute
• Hardened ductile iron
impeller and volute
• Silicon carbide faced
double mechanical seals
• Lightweight aluminum
housing
housing
TRASH PUMP 3” – WACEPT3A
CENTRIFUGAL PUMP 2” – WACEPG2
CENTRIFUGAL PUMP 3” – WACEPG3
• 4 cycle, single cylinder
Honda gasoline engine
• 159 gpm, .up to 1/4”
solid size
• 264 gpm, up to 1/4”
solid size
• 400 gpm max discharge
• Cast iron impeller
and volute
• Cast iron impeller
and volute
• Carbon ceramic
mechanical seal
• Carbon ceramic
mechanical seal
• Air cooled, 4 cycle,
single cylinder Honda gasoline engine
protection
• High strength lightweight diecast
aluminum housing
• Silicon carbide faced double mechanical seals
• Up to 1-1/2”
solid capacity
• 26.5” lowest working height
• Designed for compaction in confined areas
• 210 gpm max discharge
SUBMERSIBLE PUMP 2” – WACEPS2-400
• 110V electric
• 53 gpm max discharge, 16.8 PSI
protection
• Silicon carbide faced
double mechanical seals
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
16
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
SUBMERSIBLE PUMP – MULEST2037
SUBMERSIBLE PUMP – MULEST2040T
• 2” pump, 4 hp Robin engine
• 120 V single phase
• Perfect for construction, municipal and
agricultural applications
• Moves up to 73 gpm
• Maximum head of 37’
• Die cast aluminum casing cover
• Maximum capacity of
8520 gph
• Replaceable discharge threads
• Neoprene rubber cast over
iron impeller, internal pump
casing and impeller nut
• Maximum lift of 25’
• Automatic thermo-overload protection
• Stainless steel hardware
• Low oil shutdown
SUBMERSIBLE PUMP – MULEST-2047
TRASH PUMP 2” – MULEQP2TH
• 2” pump, 4.4 hp
Honda engine
• 3” pump, 8 hp Honda engine
• Double mechanical oil-filled
seal minimizes chances of
motor damage
• ISO9001 certification for safety
• Diesel trash pump features faster priming
times at higher heads
• Showcase dual discharge ports for operator convenience
• Strengthened pump casing for longer life
• Showcase noteworthy
improvements from
top to bottom
• Ductile iron impeller that wears better than
cast iron
• Aluminum die cast pump casing with plastic
drain plugs
• 396 gpm maximum flow
• Maximum pressure of 42 PSI
• Rugged aluminum die cast pump casing
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• Unique volute design for quick positive priming, minimal clogging and optimum efficiency
• Automatic thermo
overload protector
MATERIAL HANDLING
CENTRIFUGAL PUMP 2” – MULEQP204H
LIGHT EQUIPMENT
PUMPS
• Water resistant cast ductile iron impeller for
quick priming
LANDSCAPING
• High volume output
needed for those tough
jobs, even those with
high solid content
HAND TOOLS
• 4” trash pump, 11 hp Honda Engine
• Recoil start
• Moves solids up to 2” in diameter
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
17
PUMPS
CENTRIFUGAL PUMP 2” - TSUETE2-50HA
CENTRIFUGAL PUMP 3” – TSUETE2-80HA
SUBMERSIBLE PUMP 2” – TSUEHS2-4S-61
• 137 gpm, up to
3/8” solids
• 264 gpm, up to
3/8” solids
• Heavy-duty Honda gas
engine with oil sensor
and silicon carbide
mechanical seal
and silicon carbide
mechanical seal
• Pump sand, solids and
debris with minimal
wear and clogging
• Cast iron impeller and
volute casing
• Cast iron impeller and
volute casing
• Durable rolled steel frame
• 2.9 gal tank cap., 14.6 hr run time
• 73 gpm, up to 1/4” solids
SUBMERSIBLE PUMP 2” – TSUELB3-750
SUBMERSIBLE PUMP 3” – TSUENK2-15
SUBMERSIBLE PUMP 3/4” - TSUELSC-4
• Lightweight, compact design
• 220V single phase
• Heavy-duty, high head
pump, capable of handling
abrasive materials with
minimal wear
• Ideal for complete
drainage of flat surfaces where a sump is
not available
• 59 gpm, no solids
• Up to 69’ head
• Up to 36’ head
• 111 gpm, up to 1/3” solid
• Up to 60’ shut off head
• Semi vortex design
decreases wear by minimizing contact with
abrasives
TRASH PUMP 2” – TSUEEPT2-80HA
• 360 gpm, up to 1-1/2” solid
• 190 gpm, up to 1” solid
• 570 gpm, up to 1-1/2” solids
• Silicon carbide
mechanical seal
• Silicon carbide
mechanical seal
• Silicon carbide
mechanical seal
• 53 gpm, up to
3/8” solids
• Urethane rubber impeller for
maximum durability
• High chrome impeller,
cast iron volute casing
plus stainless steel
wear plate
• High chrome impeller,
cast iron volute casing
plus stainless steel
wear plate
• Built in shaft mounted agitator
suspends solids
• Pump/engine set mounted to cage frame on
rubber vibration cushions
• Pump/engine set mounted to cage frame on
rubber vibration cushions
PUMPS
WATER WIZARD SUBMERSIBLE PUMP –
LTGS505025
WATER WIZARD SUBMERSIBLE PUMP –
LTGS505300
• Includes garden hose
adapter and removable
inlet screen for easy
cleaning
• Includes garden hose
adapter and removable
inlet screen for easy
cleaning
• Pumps down to 1/8”
• Pumps down to 1/8”
• Manual
• Manual or automatic
• 115V, 5 amp electrical cord
• 115V, 5 amp electrical cord
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
18
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
• 3/8” square
• 1/2” square
• 1/2” square
• 10,000 rpm, 1500
impacts/min
• 8,500 rpm, 1,200
impacts/min
• 7,750 rpm, 1,300
impacts/min
• 125 ft-lbs max torque
• Durable epoxy coated
motor housing and
handle
motor housing and
handle
motor housing and
handle
• Plated steel hammer case
• Pressure feed impact mechanism lubrication
IMPACT WRENCH – INRE1712B2
IMPACT WRENCH – INRE235I
IMPACT WRENCH – INRE2906P1
• 1” square
• 1/2” square
• 1/2” square
• 6,000 rpm, 800
impacts/min
• 9500 rpm
• 5,000 rpm, 1,200
impacts/min
• Handle exhaust
• Plated ductile iron
hammer case and
durable epoxy coated
motor housing and handle
• Balanced design with
easy to use controls,
tease trigger
motor housing and
handle
• Full power in revers; adjustable power in forward
• Twin hammers mean more power per pound
• High output impact mechanism
POWER TOOLS
IMPACT WRENCH – INRE2707A1
CONCRETE & MASONRY
IMPACT WRENCH – INRE2705A1
MATERIAL HANDLING
LIGHT EQUIPMENT
IMPACT
BITS, BLADES
& ABRASIVES
• Two piece motor housing
• 3/4” square
• 5,500 rpm, 1000
impacts/min
• Conventional cast
aluminum finish
HAND TOOLS
• 1000 ft-lbs max
torque
• Full contoured housing shape
• Ergonomic handle design
• Handle exhaust
• Enhanced single hammer impact mechanism
HAMMER/CHISEL KIT – INRE116KI
• Pistol grip air hammer
• Up to 3500 bpm
• Longer life alloyed steel barrel and heat treated piston
SAFETY SUPPLIES
• Designed for medium
exhaust system, panel
cutting, and general
repair work
GENERAL SUPPLIES
HAMMERS
LANDSCAPING
• 360 degree swivel inlet
WORKWEAR
19
LIGHT EQUIPMENT
LIGHT EQUIPMENT
JACKHAMMERS
JACKHAMMER – INRE50896398
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 7/8” x 3-1/4” chuck size with hex collar
• 61 lbs
• 2000 bpm
• Forward stroke combined with power rotation
• Singe throttle lever controls collaring, drilling
and hole blowing
• Collaring = starting a hole, keeping the bit
from walking
• Hardened steel cylinder encloses the rotation
parts, valve chest and piston assembly
ROCK DRILLS
MRD40 ROCK DRILL – SULE68252227
MRD9 ROCK DRILL – SULE68252232
• 45-1/2 lbs, 23-1/8” long
• 9 lbs, 15-1/8” long
• 3/4” RD x 3-3/4”, 9/16” HX x 1-3/4”
• 1800 bpm
• 7/8” HX x 3-1/4”, 7/8” HX x
4-1/4”, 1” HX x 4-1/4”
• 3/4” NPT
• 2800 bpm
• Dead man safety handle
• 3/8” NPT
• One control for drilling
and blowing
• Dead man safety handle
• Variable throttle control
• Variable throttle control
• Continuous hole cleaning
• Continuous hole cleaning
• Direct rotation of the piston
• Direct rotation of the piston
• One control for drilling and blowing
SCALER
NEEDLE SCALER – INRE182L
NEEDLE SCALER – INRE182LNA1
• 4000 blows per minute
• 4000 blows per minute
• 9” long
• 15” long
• Long nozzle section extends retainer life and
permits the use of a variety of accessories
• Adjustable bayonet type needle housing lock
allows adjustment without special tools
• Positive chisel retainer is simple to operate
• Rubber faced throttle valve means
positive sealing
• Strengthened head block holds up under the
most extreme conditions
NEEDLE SCALER KIT – INRE182K1
• Precision heat treated needles for
maximum performance
SAFETY SUPPLIES
VACUUM
WET/DRY VACUUM – RIDS96887
WET/DRY VACUUM – RIDS96902
• 12 gal, 7’ vacuum hose
• 16 gal-Contractor
• Compact and stores easily
• For worksite/Contractor use,
won’t dent, rust or corrode
WORKWEAR
• Powerful 5.0 peak hp,
double insulated motor
20
• Powerful 6.5 peak hp motor
• Power head with new “scroll” design
• Lower center of gravity
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
THE “STUFF” SHOP VAC – SHOE925-40-10E
• Two stage 2.0 hp Peak
• 4.5 peak hp
• 4.0 peak hp
• 16 gal lightweight poly
tank w/drain
• 10 gal industrial wet/dry
vacuum cleaner
• 10 gal tough poly tank
• 18’ cord
• Epoxy coated steel tank
• Lock-on positive connection hose system
• 8.5 amp, 120V
• 9.0 amp, 120 V
• 7.9 amp, 120 V
• Includes: 1-1/2” diameter 12’ lock on hose,
(2) metal extension wands, 14” aluminum
nozzle w/ brush & squeegee insert
• 18’ cord
• Tank drain
• Includes: 1-1/4” diameter: 7’ x 1-1/4” hose,
(2) extension wands, 12” floor nozzle w/brush
& squeegee inserts, crevis tool, round brush
& gulper nozzle
• Anti-tip design
• 2-1/2” diameter: 6’ x 2-1/2” hose, (2) extension wands, 8” utility nozzle
• 5.0 peak hp
• 6.5 peak hp
• 7.5 amp, 120 V
• 9.7 amp, 120 v
• Tank drain
• Tank drain
• Anti-tip design
• Anti-tip design
• Includes: 6’ x 2-1/2” heavy-duty Lock-On
hose, (2) 2-1/2” extension wands, 8” utility
nozzle, 14” floor nozzle with squeegee insert
and crevis tool
and crevis tool
BITS, BLADES
& ABRASIVES
POWER TOOLS
and crevis tool
1-1/2” X 12’ CRUSHPROOF HOSE –
SHOS905-66
CARTRIDGE FILTER FOR WET OR DRY PICKUP
– SHOS903-04-7
DRYWALL COLLECTION FILTER BAG –
SHOS906-72-00
• Fits only 1-1/2” tools
• For small, dry debris and
wet materials
• 2 pack
• Fits most Shop-Vac wet/dry vacs
• 2/PAK
• Specially designed for pick-up
of fine dust like drywall and
cement dust or cold ashes
• High quality disposable filter bags
• Fits 10-14 gal vacs
FOAM SLEEVE – SHOS905-85
FULL CLOTH FILTER – SHOS905-28
• Use the foam sleeve for
pickup up wet messes when
used alone
• Made to fit the full
circumference of your
vac, this full cloth filter
is not only durable but
also reusable
• Foam sleeve also required
when using reusable disc
style filters
• Made to fit 14-16 gal
tanks (side inlets only)
• Perfect for pickup of small debris and
dry material
• Must be used in combination with
SHOS903-04
SAFETY SUPPLIES
• Fits 16-22 gal vacs
• High quality disposable filter bags
GENERAL SUPPLIES
DRYWALL COLLECTION FILTER BAG –
SHOS906-73-00
• Specially designed for pick-up
of fine dust like drywall and
cement dust or cold ashes
LANDSCAPING
• Black, heavy-duty, medium length
• Designed to combat your
toughest challenge, the
cartridge filter can be used for both wet and
dry pick up
HAND TOOLS
VACUUM ACCESSORIES
• All purpose hose for
industrial use
CONCRETE & MASONRY
ECONOMY SHOP VAC – SHOE850-02
MATERIAL HANDLING
CONTRACTOR DUTY SHOP VAC – SHOE610-16
LIGHT EQUIPMENT
VACUUMS
WORKWEAR
21
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LIGHT EQUIPMENT
VACUUM ACCESSORIES
FULL CLOTH FILTER – SHOS905-29
HEPA CARTRIDGE FILTER – SHOS903-34
• Made to fit the full circumference of your vac, this full
cloth filter is not only durable
but also reusable
• For high efficiency particulate
air filtration that’s 99.97%
efficient down to 0.3 microns
• Made to fit 18-25 gal tank
(side inlet only)
• Fits most Shop-Vac wet/dry vacs
• Use for dry pickup only
• Perfect for pickup of small debris and dry
material
• Must be used in combination with
SHOS903-04
• Foam sleeve protects filter from being damaged by larger debris
• Shop-Vac extensively tests HEPA filters to
ensure the highest quality performance and
specifications
REUSABLE DISC FILTERS WITH MOUNTING
RING – SHOS901-07
• 5 pack
• Must be used in combination with a SHOS905-85
Foam Sleeve
• Save money and another trip to the local store
with these economical, reusable disc filters
• Just wash and reuse, again and again
• Easy to use mounting ring for pick-up of larger debris and dry material
VACUUM ATTACHMENTS
BRUSH – SHOS903-18-7
CHROME PLATED WANDS – SHOS903-08-8
METAL MASTER NOZZLE – SHOS903-15-3
• Industrial 14” brush shoe
• Industrial chrome plated wand
• Industrial 14” metal master nozzle
• Fits only 1-1/2” hoses
• Brush accessory for
use with 1-1/2” nozzle
• Wand accessory for
use with 1-1/2” hose
• Metal nozzle for use
with 1-1/2” hose
• Ideal for dry pickup on
hard surfaces
• 2 piece
• For use with interchangeable 14” attachments
RUG SHOE – SHOS903-17-9
SQUEEGEE – SHOS903-16-1
• Industrial 14” rug shoe
• Industrial 14” double blade squeegee
• Carpet accessory for
use with 1-1/2” nozzle
• Squeegee accessory
for use with 1-1/2”
nozzle
• Effective for carpets
• Good for big areas of wet clean up
GENERAL SUPPLIES
LANDSCAPING
VIBRATORS
HI CYCLE VIBRATOR – WACEIRFUN38
HI CYCLE VIBRATOR – WACEIRFUN57
VIBRATOR POWER UNIT – WACEM1000
• Flexible for all types of applications
• Flexible for all types of applications
• 115 V Electric, 1.3 hp
• 1.5” vibrator head
• 2.3” vibrator head
• 15,500 rpm
• 18 ft protection hose
• 18 ft protection hose
• 24” cord
• 12,000 rpm
• Double insulated and grounded motor
• 3 phase high frequency
• Double insulated nd
grounded motor
• 49.2 ft supply cable
• Standard quick disconnect coupling on motor
• Standard quick disconnect coupling on motor
VIBRATOR POWER UNIT – WACEM2000
• 17,500 rpm
• 24” cord
• Air-cooled, 4 cycle, single cylinder Honda
gasoline engine
• High strength lightweight diecast aluminum
housing
WORKWEAR
SAFETY SUPPLIES
• 115 V electric, 2.3 hp
22
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
• ROKE30D1 - 1” x 14”
• 1-8 hp electric motor
• ROKE30E12 - 1-1/4” x 14”
• Access ports are
provided at the side
of the unit
of the unit
• Wrap-around frame
• Water tight strain relief
• Oversized brushes and holder
• Interchangeable shaft adaptors
• Four high performance lifetime ball bearings
• Easy access to brushes
• Alloy steel housing resists wear
• Cast aluminum housing
• Scientifically designed eccentric maximizes
amplitude
• Heavy-duty motor windings
VIBRATOR MOTOR – ROKE30BA3
FLEXIBLE SHAFT-CORE AND CASING
• ROKE30A10 - 10’
of the unit
• ROKE30A14 - 14’
• ROKE30F15 - 1-1/2” x 14”
• ROKE30G17 - 1-3/4” x 14”
• ROKE30H2 - 2” x 14”
• Permanent seal
keeps oil in, contaminants out
• ROKE30A21 - 21’
• ROKE30A5 - 5’
• ROKE30A7 - 7’
• Heavy-duty shaft
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
VIBRATOR HEADS
LIGHT EQUIPMENT
VIBRATORS & ACCESSORIES
• Stiffer, used primarily for better pokeability
HIGH CYCLE VIBRATOR – MULEFXA60A4
FLEXIBLE SHAFT VIBRATOR – MULEPMA2
• 2 amp, 3 phase, 230 volt
• 4.5 amp, 3 phase, 230 volt
• 10,800 vibrations p/minute
• 10,800 vibrations p/minute
• 2 hp, 115 volt
electric motor
• 2” head diameter, 16.5”
head length
• 2-3/8” head diameter,
19-1/4” head length
• 13.1’ hose
• 13.1’ hose
• 2 amp electric motor
located within the vibrating head
• Perfect for use with
large pours, particularly where low-slum
concrete is used
• Features hardened eccentric housing for
long life
FLEXIBLE SHAFT VIBRATOR – MULEPMA3
• 3 hp, 115 volt
electric motor
SAFETY SUPPLIES
• Starting amperage
of 25 amps and a
running amperage
of 17.5 amps
GENERAL SUPPLIES
• The tool retains at least 95 percent of its
power under full load
• Starting amperage
of 22 amps and a
running amperage
of 13 amps
LANDSCAPING
HIGH CYCLE VIBRATOR – MULEFXA50A4
HAND TOOLS
VIBRATORS
WORKWEAR
23
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
NOTES
24
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
SERIES 5,000 – LIFS60501
• 10’ in length
• 15’ in length
• 27’ in length
• Two piece assembly with one 12” nominal
fixed length end and one adjustable end
• 1” wide polyester webbing
• Ultimate strength - 2,100 lbs
• Working load limit - 700 lbs
• Working load limit - 700 lbs
• Working load limit - 1,600 lbs
SERIES 10,000 – LIFS61001
CONCRETE & MASONRY
SERIES 1,000 – LIFS60103-15
MATERIAL HANDLING
SERIES 1,000 – LIFS60103-10
LIGHT EQUIPMENT
RATCHET ASSEMBLIES
• 27’ in length
POWER TOOLS
• Working load limit - 3,000 lbs
• 3/16” cable, 6’ max lift
• Precision castaluminum alloy
ratchet wheel-one
piece construction
• Precision castaluminum alloy
ratchet wheel-one
piece construction
• Galvanized, aircraft quality cable
• Galvanized, aircraft quality cable
• Interlocking, precision fit, steel alloy pawls
with safety space sleeve
• Interlocking, precision fit, steel alloy pawls
with safety space sleeve
• Cold rolled, high strength, tempered steel
frame and handle
• Cold rolled, high strength, tempered steel
frame and handle
• Drop-forged steel slip hooks with OSHA recommended safety latches
• Drop-forged steel slip hooks with OSHA recommended safety latches
• Heavy gauge steel, reinforced ratchet guard
• Heavy gauge steel, reinforced ratchet guard
• Aircraft type, heat treated bolts
• Aircraft type, heat treated bolts
• High tensile, fully rotating steel swivel
• High tensile, fully rotating steel swivel
GENERAL SUPPLIES
• 3/16” cable, 12’ max lift
LANDSCAPING
2 TON POW’R-PULL – MAAS144SB-6
HAND TOOLS
1 TON POW’R-PULL – MAAS144S-6
BITS, BLADES
& ABRASIVES
CABLE PULLERS
SAFETY SUPPLIES
WORKWEAR
25
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
HOISTS
RATCHET LEVER HOIST –
DUFELSB-1500A-LCX
DUFELSB-3000A-LCX
DUFEMA-15-LCX
• LSB series, 1-1/2 ton
• LSB series, 3 ton
• MA series, 3/4 ton
• Optional load limiter
• Optional load limiter
• Rugged
• Rugged and lightweight
• Rugged and lightweight
• Low handle effort
• Low handle effort
• Free chaining
mechanism
• 360 degree rotating
handle
• 360 degree rotating
handle
• Easy free chaining
• Easy free chaining
• Precise load
positioning
• Positive load control
• Positive load control
• Handle stops
• Top sling models
RATCHET LEVER HOIST – DUFEMA-30-LCX
HAND CHAIN HOIST – DUFELHH-1B-LCX
CHAIN HOIST – DUFEEMC-500B
• MA series, 1-1/2 ton
• LHH series, 1 ton
• 500 lbs capacity, 10’ lift
• Rugged
• Compact and lightweight
• 115V, single phase motor
• Free chaining
mechanism
• Easy to operate
• Swivel top and bottom
hooks with safety latches
• Five seals
• Durable
• Precise load
positioning
• Easy to maintain
• Safety and load control
• Lightweight and compact
aluminum housing for
strength and portability
• Electromagnetic brake
quick acting for positive
load control
• Handle stops
BITS, BLADES
& ABRASIVES
• Five seals
• Top sling models
• Thermal motor protection standard to prevent
overheating
• Light duty, rated for intermittent duty
applications
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• UL listed
WIRE ROPE HOIST – DUFEEMW-500B
MINI HOIST – DUFETB-602
• 500 lbs capacity,
10’ lift
• TB-602
• 115V, single
phase motor
• Weston-type load brake
• Patented load chain
• Rubber hand grip for
better comfort and security
• Swivel top and
bottom hooks with
safety latches
• Lightweight design for
ease of portability
• Lightweight and compact aluminum housing
for strength and portability
• Forged upper and lower
hooks with latches standard
• Electromagnetic brake quick acting for positive
load control
• Impact resistant, all steel frame, gear case and
cover
• Thermal motor protection standard to prevent
overheating
• Hardened link type steel load chain for
strength and long wear
• UL Listed
WORKWEAR
SAFETY SUPPLIES
• Light duty, rated for intermittent duty
applications
26
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
LIGHT EQUIPMENT
HOISTS
P SERIES PULLER – BBBEP15D3H
• 4:1 design factor, meets ASME B30.21
• 4:1 design factor, meets ASME B30.21
• Lightweight
aluminum frame
• Handle and frame are
heavy gauge steel with
rivet construction and
slip-resistant grip
• Alloy steel load hook with
safety latches
• Buttress tooth design
improves load gear life
• Exclusive long life
“buttress tooth” cast
gear design
CONCRETE & MASONRY
• Galvanized aircraft quality
wire rope
MATERIAL HANDLING
C SERIES PULLER – BBBEC400H
• Galvanized aircraft quality
wire rope is preformed to
prevent kinks
CHAINS
PROOF COIL CHAIN-GRADE 30 –
TUMS012-1202
HIGH TEST CHAIN-GRADE 43
• TUMS012-0302 - 3/16”
• 3/4”
• TUMS018-0412 - 1/4”
• TUMS012-0422 - 1/4”
• Excellent general purpose
chaining of standard commercial quality
• TUMS018-0512 - 5/16”
• TUMS012-0502 - 5/16”
• TUMS012-0602 - 3/8”
• TUMS012-1202 - 3/4”
• TUMS018-0612 - 3/8”
• TUMS018-0812-1/2 - 1/2”
• Designed for use in load
binding, towing, logging
• Excellent general purpose chaining of standard
commercial quality
• Proof tested, bright finish
• Standard material: carbon steel
• Hallmarking: “C4” or”M4”
• Proof tested, bright finish
• Frequently used for fabricating tow chains,
binding or tie down chains
• DO NOT USE FOR OVERHEAD LIFTING
• Hallmarking: “C4” or”M4”
HAND TOOLS
• Standard material: low carbon steel
• Proof tested, self-colored
• Standard material:
Carbon steel
• TUMS022-2625 - 3/8” x 14’
• 3/8” x 20’
• Chain has forged heat
treated clevis grab hook
on each end
• TUMS022-2725 - 3/8” x 16’
• Chain may be used in accordance with the latest DOT regulations
• 5/8”
• Designed for use in load
binding, towing, logging
• Standard finish: bright
• Standard finish: bright
• Chain has forged heat treated clevis grab hook
on each end
GENERAL SUPPLIES
HIGH TEST CHAIN-GRADE 43 W/ CLEVIS GRAB
HOOKS – TUMS022-2925
LANDSCAPING
HIGH TEST CHAIN-GRADE 43 W/ CLEVIS GRAB
HOOKS
HIGH TEST CHAIN-GRADE 43 –
TUMS018-1012-5/8
BITS, BLADES
& ABRASIVES
• TUMS012-1002-5/8 - 5/8”
• Frequently used for
fabricating tow chains,
binding or tie down chains
POWER TOOLS
PROOF COIL CHAIN-GRADE 30
SAFETY SUPPLIES
WORKWEAR
27
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
CHAINS
BINDER CHAIN-GRADE 70
BINDER CHAIN-GRADE 70 – TUMS051-3665
• 5/16”
• TUMS051-3571 - 5/16” x 14’
• 3/8” x 20’
• TUMS051-3572 - 5/16” x 16’
• TUMS051-3574 - 5/16” x 20’
• Standard finish: yellow chromated zinc electroplated
• TUMS051-3575 - 5/16” x 25’
CONCRETE & MASONRY
TRANSPORT CHAIN-GRADE 70 –
TUMS051-0512
• TUMS051-3660 - 3/8” x 16’
• For use in load
binding, towing
and logging
• Chain may be used in
accordance with the
latest DOT regulations
• Standard material: heat treated carbon steel
• Chain may be used in accordance with the
• Zinc electroplate & yellow chromate conversion coating finish
• Standard finish: yellow chromated zinc
electroplated
• Proof tested
POWER TOOLS
on each end
TRANSPORT CHAIN-GRADE 70 –
TUMS051-0612
BITS, BLADES
& ABRASIVES
• 3/8”
• For use in load binding,
towing and logging
• Chain may be used in
accordance with the
on each end
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
CHAIN ACCESSORIES
ANCHOR SHACKLES
CONNECTING LINKS
QUICK LINKS
• BWTS541-0405 - 1/4”, 1/2 ton
• BWTS520-0304 - 3/16”
• COVS764-5116 - 3/16”
• BWTS541-0505 - 5/16”, 3/4 ton
• BWTS520-0404 - 1/4”
• COVS764-5126 - 1/4”
• BWTS541-0605 - 3/8”, 1 ton
• BWTS520-0704 - 7/16”
• COVS764-5136 - 5/16”
• BWTS541-0805 - 1/2”, 2 ton
• BWTS520-1405 - 7/8”
• COVS764-5146 - 3/8”
• BWTS541-1005 - 5/8”, 3-1/4 ton
• Forged carbon steel
• COVS764-5166 - 1/2”
• BWTS541-0705 - 7/16”, 1-1/2 ton
• Self-colored
• Steel
• BWTS541-1205 - 3/4”, 4-3/4 ton
• Zinc plated
• BWTS541-1405 - 7/8”, 6-1/2 ton
• BWTS541-1605 - 1”, 8-1/2 ton
• BWTS541-1805 - 1-1/8”, 9-1/2 ton
SAFETY SUPPLIES
• BWTS541-2005 - 1-1/4”, 12 ton
• BWTS541-2205 - 1-3/8”, 13-1/2 ton
• BWTS541-2405 - 1-1/2”, 17 ton
• Screw pin
WORKWEAR
• Painted blue
28
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
SPRING SNAP LINKS
REGULAR NUT EYEBOLTS
STEEL DROP SIDE WR SNATCH BLOCK –
BWTS733-9754
• BWTS715-0108 - 1/2” x 3-1/4”
• 3”, 2 ton
• BWTS715-0122 - 3/4” x 12”
• Bronze bushed
• COVS764-5046 - 1/2”
• Drop forged carbon steel
• Galvanized
• Steel
• Galvanized
• Zinc plated
ALLOY CLEVIS GRAB HOOKS
ALLOY CLEVIS SLIP HOOKS
• BWTS564-4495 - 9/32”
• BWTS450-3315 - 1/4”
• BWTS440-3315 - 1/4”
• BWTS564-5095 - 5/8”
• BWTS450-3415 - 5/16”
• BWTS440-3515 - 3/8”
• BWTS564-5295 - 3/4”
• BWTS450-3515 - 3/8”
• BWTS440-3715 - 1/2”
• Grade 100
• BWTS450-3715 - 1/2”
• Forged alloy
• Painted green
• BWTS450-3915 - 3/4”
• Painted orange
• Painted orange
CLEVIS GRAB HOOKS
CLEVIS SLIP HOOKS
• BWTS562-4415 - 9/32”
• BWTS450-0405 - 1/4”
• BWTS440-0405 - 1/4”
• BWTS562-4615 - 3/8”
• BWTS450-0505 - 5/16”
• BWTS440-0505 - 5/16”
• BWTS562-4815 - 1/2”
• BWTS450-0605 - 3/8”
• BWTS440-0605 - 3/8”
• BWTS562-5215 - 3/4”
• BWTS450-0805 - 1/2”
• BWTS440-0805 - 1/2”
• Grade 100
• BWTS450-1005 - 5/8”
• Forged steel
• Painted green
• Forged steel
• Self-colored
BITS, BLADES
& ABRASIVES
CAM ALLOY EYE GRAB HOOKS
POWER TOOLS
• Forged alloy
CONCRETE & MASONRY
CAM ALLOY EYE SLING HOOKS W/ LATCH
MATERIAL HANDLING
• COVS764-5006 - 1/4”
• COVS764-5026 - 3/8”
LIGHT EQUIPMENT
CHAIN ACCESSORIES
• Self-colored
SNAP HOOKS
• BWTS394-0705 - 3 ton
• BWTS453-0735 - 7/16”
• BWTS391-2305 - 1 ton
• BWTS394-0905 - 5 ton
• BWTS453-0935 - 9/16”
• BWTS391-2505 - 2 ton
• BWTS394-1105 - 7 ton
• BWTS391-2705 - 3 ton
• Drop forged steel
• Galvanized
• BWTS391-2905 - 5 ton
• Painted blue
LANDSCAPING
REGULAR SWIVEL HOIST HOOKS
• BWTS391-2205 - 3/4 ton
HAND TOOLS
REGULAR EYE HOIST HOOKS
• BWTS391-3105 - 7-1/2 ton
• Drop forged steel
• Painted Blue
LATCH KIT – BWTS399-0101
LATCH KIT – BWTS399-0201
• BWTS542-3301 - 3/8”-3/8”
• For 1/4”
• For 5/16”
• BWTS542-3302 - 7/16”-1/2”
• For 440-0405 slip hook
• For 440-0505 slip hook
• Forged steel
• Blu-Krome
GENERAL SUPPLIES
TWIN CLEVIS HOOKS
SAFETY SUPPLIES
WORKWEAR
29
LIGHT EQUIPMENT
MATERIAL HANDLING
CHAIN ACCESSORIES
UNIVERSAL LATCH KIT
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• BWTS399-1401 - 3/4 ton
• BWTS399-1402 - 1 ton
• BWTS399-1403 - 1-1/2 ton
• BWTS399-1404 - 2 ton
• BWTS399-1405 - 3 ton
• BWTS399-1406 - 5 ton
• BWTS399-1407 - 7-1/2 ton
CYLINDERS
SPRING RETURN CYLINDER – SIPSR102
SPRING RETURN CYLINDER – SIPSR252
SPRING RETURN FLAT JACK – SIPSRFS20
• 10 ton
• 25 ton
• 20 ton
• High flow quality
couplers
couplers
• Stop rings for piston
blow out protection
• Collar threads designed
for full load
• Collar threads designed
for full load
• Domed piston resists
side load
• Base & piston mountings for easy fixturing
• Base & piston mountings for easy fixturing
• Plated pistons to resist
scoring & corrosion
• Removable load caps for flexibility & safety
• Removable load caps for flexibility & safety
• Mounting holes
• Stop ring for piston blow out protection
• Stop ring for piston blow out protection
• Rod wiper protects inner cylinder from dirt
• Plated piston to resist scoring & corrosion
• Plated piston to resist scoring & corrosion
• Large bearings resist side load
• Large bearings resist side load
SPRING RETURN LOW PROFILE CYLINDER –
SIPSRLS502
• 50 ton
• Plated pistons to resist
scoring & corrosion
LANDSCAPING
couplers
• Stops rings for piston
blow out protection
HIGH PRESSURE HOSE – SIPSHC6
HIGH PRESSURE HOSE – SIPSHC10
• 6’
• 10’
• Industrial grade 1/4” I.D.
hose is rated at 10,000
psi operating pressure
and 20,000 psi minimum burst pressure
• Industrial grade 1/4” I.D.
hose is rated at 10,000
psi operating pressure
and 20,000 psi minimum burst pressure
• 3/8” male NPTF threads
• 3/8” male NPTF threads
• Includes end guards
• Includes end guards
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
HIGH PRESSURE HOSES
30
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
• 1 gal
• 1 quart
• Special, high pressure
formulated, premium
grade for all Simplex
hydraulic products
• Special, high pressure
formulated, premium
grade for all Simplex
hydraulic products
• High viscosity index
insures maximum lubricity over a wide range of
operating temperatures
• High viscosity index
insures maximum lubricity over a wide range of
operating temperatures
JACKS
HAND JACKS
CONCRETE & MASONRY
HYDRAULIC OIL – SIPSAO12
MATERIAL HANDLING
HYDRAULIC OIL – SIPSAO1
LIGHT EQUIPMENT
HYDRAULIC OIL
• SIPSHJ3 - 3 ton
POWER TOOLS
• SIPSHJ8 - 8 ton
• SIPSHJ12 - 12 ton
• SIPSHJ22 - 22 ton
• Drop forged base and
rugged welded construction
BITS, BLADES
& ABRASIVES
• Operates in horizontal position with
handle down
• Over travel protection
• Grooved saddles help prevent load slippage
• Include screw extensions
• Piston rods are chrome plated to resist
corrosion
HAND TOOLS
PUMPS
HAND PUMP – SIPSP42
• Single speed
• Two speed
• Delivers a constant flow
to smaller cylinders or
hydraulic powered tools
regardless of load
• With the cylinder
unloaded, pump delivers
a high volume of oil for
fast cylinder speed
• Ideal when light weight and portability are
important
• Once the load is engaged, the pump automatically switches to the high pressure stage
GAT’R JAW SPREADER – SIPSS2000
GENERAL SUPPLIES
SPREADERS
LANDSCAPING
HAND PUMP – SIPSP41
• 1 ton
• Spring return for
easy operation
• Narrowclosed ends
SAFETY SUPPLIES
couplers
• All metal construction
WORKWEAR
31
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
JACK STANDS
MAX JAX – SUME781400
MAX JAX – SUMS781405
MAX JAX – SUMS781406
• Supports 2500 lbs
• Caster set for Max Jax
• Roller head kit for Max Jax
• Large, convenient
adjustable handle
• Jack independently
load tested for
quality assurance
• CE rated
• Casters and V-Head styles optional
PRO JACK – SUMEST871/780471
PRO JACK – SUMEST872/780472
• V-Head
• Roller head
• Formed steel legs
• Formed steel legs
• 2000 lbs capacity
• Strut tension plate for
superior lateral support
• Strut tension plate for
superior lateral support
• Quick action lockwasher for fast height
positioning
• Quick action lockwasher for fast height
positioning
• Patented Fall Guard feature allows 1” safety
zone around lockwasher
• Patented Fall Guard feature allows 1” safety
zone around lockwasher
• CE rated
• CE rated
LADDERS
TYPE 1A 300 LB FIBERGLASS STEP LADDERS
TYPE 1AA 375 LB FIBERGLASS STEP
LADDERS
TYPE 1A 300 LB ALUMINUM EXTENSION
LADDERS
• WERS6204 - 4’ H x 19-7/8” W
• WERS7306 - 6’ H x 25” W
• WERSD1516-2 - 16’, 13’ working length
• WERS6205 - SIZE???
• WERS7308 - 8’ H x 28-1/2” W
• WERS6206 - 5’ H x 21-5/8” W
• WERS7310 - 10’ H x 32” W
• WERS6208 - 6’ H x 23-3/8” W
• New heavy gauge ToolTra-Top offers strength,
durability and utility
• WERS6210 - 10’ H X 30-3/8” W
• Slip resistant TractionTred steps are single riveted and knee braced
• Tool-Tra Top with drill
holster and convenient
tray for tools
• Heavy-duty internal
spreaders
• Back up plates reinforce
all top connectors
• Glas*Mark violator stripes on rails allow ladder to be more visible
• Handy paint can hanger
on back side of top
• The EDGE bracing system helps to decrease
damage to rail
• Double riveted, slip
resistant Traction-Tred steps
• EDGE molded brace and foot pad combination
provides enhanced bracing strength and
increased protection against damage
• Mar resistant end
caps, extra heavy-duty
I-beam rails
• Smooth operating pulley design enclosed
shape protects pulley
• Slip-resistant TractionTred D rungs
• Rugged spring loaded locks operate smoothly
• Rope clamp ties rope to rung
• Rugged shoe rests flat or is held in spur position with Shu-Lok feature
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• WERS6212 - 12’ H x 33-7/8” H
32
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
LIGHT EQUIPMENT
LADDERS
TYPE 1A 300 LB FIBERGLASS EXTENSION
LADDER
MATERIAL HANDLING
CONCRETE & MASONRY
• Mar resistant end caps, extra
heavy-duty I-beam rails
• External guides at top of base
section securely interlock rails
• Slip-resistant Traction-Tred
D rungs
POWER TOOLS
• Rugged gravity spring locks
operate smoothly
• Rope clamp ties rope to rung
• Durable rail shield bracket and shoe with
Shu-Lok, slip-resistant pad and spur plate
BITS, BLADES
& ABRASIVES
LADDER ACCESSORIES
LADDER RACK-TRUCK – WERSTR101-S
LADDER RACK-VAN – WERSVR101-A
• Aluminum, 250 lbs
capacity
• Steel, 250 lbs capacity
• Aluminum, 400 lbs capacity
• Removable
• Easy to install
• Removable
• Adjusts from 24” to
36” wide
• Mounts directly to
rain gutter
• Two layers glossy
black powder coat
finish
70” wide
• 24” wide
• Steel, 600 lbs
capacity
LANDSCAPING
LADDER RACK-VAN – WERSVR101-S
HAND TOOLS
LADDER RACK-TRUCK – WERSTR101-A
• Easy to install
70” wide
• Two layers glossy black, powder coat finish
• End plates are pre drilled for tie down straps
GENERAL SUPPLIES
• Mounts directly to
rain gutter
SAFETY SUPPLIES
WORKWEAR
33
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
UTILITY SCAFFOLDING
GUARD RAIL – BLXS012714906
OUTRIGGER KIT – BLXS0127-150
ROLLING SCAFFOLD – BLXS0127-006-0
• 6’ guard rail
package
• 18” outrigger kit
• Single unit
• 29” x 6’ x 6’
• Easy to assemble,
lightweight
• Can be stacked up to
3 units high
LIFTS
MATERIAL LIFT – SUMEZ150/780001
MATERIAL LIFT – SUMEZ250/780003
MATERIAL LIFT – SUME2015/783701
• 15’
• 25’
• 15’
• Lifts 1,500 lbs
• Lifts 1,500 lbs
• Moves vertically and
horizontally
• Moves vertically and
horizontally
• Rolls through standard doorways
• Separate load and
mast winches
• Separate load and
mast winches
• Loading bar great for
overhead cranes
• 2-speed winch
• 2-speed winch
• Reversible forks
• Infinite load adjustment
• Infinite load adjustment
• Ideal for job site or shop
• Ideal for job site or shop
• Plunger pins for quick readjustment and compact storage
• Mast and base separate quickly for EASY
transport
• Mast and base separate quickly for EASY
transport
• No tools needed, no loose parts
• Large 7/32” load cable, feeds inside mast
• Lockable, 5” polyurethane casters
HAND TOOLS
MATERIAL LIFT – SUME2025/783703
• 25’
• Rolls through standard doorways
LANDSCAPING
• Loading bar great for
overhead cranes
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed, no loose parts
• Lockable, 5” polyurethane casters
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Large 7/32” load cable, feeds inside mast
34
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
LIGHT EQUIPMENT
PIPE DOLLIES
PIPE DOLLY – SUMEST401/780351
MATERIAL HANDLING
• Enables one man
to lift 2,000 lbs
unassisted
• Special sliding chain
block design accommodates long and
short loads
CONCRETE & MASONRY
• Carries up to 20” diameter pipe, tool boxes,
fittings and valves
• Fits through 35” openings, is a versatile 12’
long and weights only 165 lbs
• Sliding chain block accommodates long or
short loads
• Rugged high pressure tires and wheels allow
for construction site mobility
POWER TOOLS
• Chains can be used to lock wheels for security
LOAD BINDERS
LEVER TYPE LOAD BINDER – CRLS10-48422
• 5/16”-3/8”
• 3/8”-1/2”
• 3/16”-1/4”
• New design “one
piece” forged handle
• New design “one
piece” forged handle
• Continuous take-up
feature, infinite
adjustment, gets the
last half of chain
• Continuous take-up
feature, infinite
adjustment, gets the
last half of chain
• Extra heavy construction
at leverage point to prevent spreading
• One piece assembly, no bolts or nuts
to loosen
• One piece assembly, no bolts or nuts
to loosen
• Ratchet spring rust proofed
• Ratchet spring rust proofed
• All load bearing or holding parts forged
• All load bearing or holding parts forged
• Easy operating positive ratchet
• Easy operating positive ratchet
• 5/16”-3/8”
• 3/8”-1/2”
• Extra heavy construction at leverage
point to prevent
spreading
• Extra heavy construction at leverage
point to prevent
spreading
• Heel of binder toggles away from load, permitting easy release
• Heel of binder toggles away from load, permitting easy release
• Ball and socket swivel joints at hook assemblies permit a straight line pull
• Meets or exceeds DOT and CVSA cargo
securement guidelines, August 1994
• Heel of binder toggles
away from load, permitting easy release
BITS, BLADES
& ABRASIVES
HAND TOOLS
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
35
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
LOAD BINDERS
LOAD BINDER-RATCHET TYPE –
TUMS6207504
LOAD BINDER-RATCHET TYPE –
TUMS6207803
LOAD BINDER-LEVER TYPE – TUMS6203205
• 5/16”-3/8”
• 3/8”-1/2”
• 1/4”
• To tighten chain,
typically for cargo
securement
typically for cargo
securement
typically for cargo
securement
• Meets US DOT
393.100-393.102
requirements for
use with chain
• Meets US DOT
393.100-393.102
requirements for use
with chain
• Meets US DOT
393.100-393.102
with chain
• Ratchet lever
• Double swivel lever
• Allows for easier adjustment of tension and
greater range of take-up
• Allows for quicker application of load
• Red, imported
• Red, imported
• 5/16”-3/8”
• 3/8”-1/2”
typically for cargo
securement
typically for cargo
securement
• Meets US DOT
393.100-393.102
requirements for
use with chain
• Meets US DOT
393.100-393.102
with chain
• Double swivel lever
• Ratchet lever
• Allows for quicker application of load
• Allows for easier adjustment of tension and
greater range of take-up
• Red, imported
HAND TOOLS
• Red, imported
WIRE ROPE SLINGS
WIRE ROPE SLINGS
WIRE ROPE SLINGS –
WIRE ROPE SLINGS
• JDHS382 - 3/8” x 2’
• JDHS388H - 3/8” x 8’
with sliding choker hook
• JDHS124 - 1/2” x 4’
• JDHS3810H - 3/8” x 10’
• JDHS128 - 1/2” x 8’
• JDHS3812H - 3/8” x 12’
• JDHS1212 - 1/2” x12’
LANDSCAPING
• JDHS383 - 3/8” x 3’
• JDHS384 - 3/8” x 4’
• JDHS386 - 3/8” x 6’
• JDHS388 - 3/8” x 8’
• JDHS3810 - 3/8” x 10’
GENERAL SUPPLIES
• JDHS3812 - 3/8” x 12’
• Permaloc slings are made using the flemish
splice technique to form the eyes
• Reserve strength, integrity of eyes not solely
dependent upon steel sleeves
• IWRC resists crushing better that FC ropes
• JDHS1210 - 1/2” x 10’
• JDHS1216 - 1/2” x 16’
• JDHS1220 - 1/2” x 20’
• Permaloc slings are made using the flemish
• Good abrasion resistance for longer life
WORKWEAR
SAFETY SUPPLIES
• Permaloc slings are made
using the flemish splice
technique to form the eyes
• JDHS126 - 1/2” x6’
36
Call us at: 8 00-6 6 9-778 8
MATERIAL HANDLING
• JDHS584 - 5/8” x 4’
• JDHS346 - 3/4” x 6’
• JDHS586 - 5/8” x 6’
• JDHS348 - 3/4” x 8’
• JDHS588 - 5/8” x 8’
• JDHS3410 - 3/4” x 10’
• JDHS5810 - 5/8” x 10’
• JDHS3420 - 3/4” x 20’
• JDHS5812 - 5/8” x 12’
• Permaloc slings are
made using the flemish
• Permaloc slings are
made using the flemish
splice technique to
form the eyes
WIRE ROPE FIST GRIP CLIPS
POWER TOOLS
WIRE ROPE ACCESSORIES
CONCRETE & MASONRY
WIRE ROPE SLINGS
MATERIAL HANDLING
WIRE ROPE SLINGS
LIGHT EQUIPMENT
WIRE ROPE SLINGS
• CRLS1010471 3/16”-1/4”
• CRLS1010514 - 3/8”
BITS, BLADES
& ABRASIVES
• CRLS1010532 7/16”-1/2”
• CRLS1010550 9/16”-5/8”
• CRLS1010578 - 3/4”
• Bolts are an integral part of the saddle
HAND TOOLS
• Nuts can be installed in such a way as to
enable the operator to swing wrench in a full
arc for fast installation
• All sizes have forged steel saddles
• Entire clip is galvanized to resist corrosive and
rusting action
WIRE ROPE CLIPS
• BWTS626-0202 - 5/16”
• BWTS699-0234 - 1/8”
• BWTS626-0203 - 3/8”
• BWTS699-0334 - 3/16”
• BWTS626-0205 - 1/2”
• BWTS699-0434 - 1/4”
• Heavy-duty
• BWTS699-0534 - 5/16”
• Galvanized
• BWTS699-0634 - 3/8”
GENERAL SUPPLIES
HEAVY WIRE ROPE THIMBLES
LANDSCAPING
WIRE ROPE ACCESSORIES
• BWTS699-0734 - 7/16”
• BWTS699-1034 - 5/8”
• BWTS699-1234 - 3/4”
• BWTS699-1434 - 7/8”
SAFETY SUPPLIES
• BWTS699-0834 - 1/2”
• BWTS699-1634 - 1”
WORKWEAR
• Galvanized
37
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
MATERIAL HANDLING
WOOD DECK
PLATFORM TRUCK
WOOD DECK PLATFORM TRUCK –
MHSS2754WD-8MR-1A
WOOD DECK PLATFORM TRUCK –
MHSS3060WD-8MR-1A
• 27”x53” deck size,
1500 lbs capacity
• 30”x60” deck size,
2000 lbs capacity
• 1” kiln dried oak
• 1” kiln dried oak
• Bolt heads counter
sunk for smooth
surface
• Bolt heads counter
sunk for smooth
surface
• Cast heavy-duty pockets for pipe handles
• Cast heavy-duty pockets for pipe handles
• Decks sanded and varnished
• Decks sanded and varnished
• Cross supports-under deck for rigidity and
strength
• Cross supports-under deck for rigidity and
strength
• Casters: American-made, cold forged 2” tread
width casters used exclusively
• Casters: American-made, cold forged 2” tread
width casters used exclusively
• Molded on rubber wheels
• Molded on rubber wheels
• Removable handles
• Removable handles
BARREL LIFT &
DRUM STAND
BARREL LIFT & DRUM STAND – MHSSDC55
• Welded steel
barrel cradle
HAND TOOLS
• Polyolefin wheels
• All welded construction
• 32”x18”x18”
INDUSTRIAL SERIES HAND TRUCK –
MHSSHT42-CZ
• Construction-heavyduty 1” O.D. 14 gauge
rigid tubular frame
• Braces are notched
to give extra weld
surface for strength
and durability
• Toe plates-1/4” heavy-duty, machine beveled
edges to slide under loads easily
• Axles-5/8” threaded for secure mounting,
eliminates cotter pin, easier repair
• Rust resistant frames are painted alert orange
• Zero pressure tires are solid (no hollow core),
core is high impact polyolefin, will not deform
under load
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TRUCK
38
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
ASPHALT LUTE HANDLE – BTSSBTTE9
• 6’ x 1-1/2” handle
only (no holder)
• 8’ 4” x 1-1/2” handle
only (no holder)
• Magnesium handle,
lighter weight than aluminum
• Magnesium handle, lighter weight than aluminum
ASPHALT LUTE HEAD – BTSSBTTLH30
• 30” head only
• Aluminum alloy head, 1/8” thick tee-beam has
blunt teeth with a notch
ASPHALT LUTE HOLDER – BTSSBTTEHO
• Lute holder only,
includes hardware
• 36” head only
• Aluminum alloy head, 1/8” thick tee-beam has
blunt teeth with a notch
LIGHTWEIGHT ASPHALT LUTES –
BTSSBTTE306
• 30” head 6’ handle
• Aluminum alloy head,
1/8” thick tee-beam
has blunt teeth with a
notch
• Magnesium handle, lighter weight
than aluminum
POWER TOOLS
LIGHTWEIGHT ASPHALT LUTES –
BTSSBTTE366
• 36” head 6’ handle
BITS, BLADES
& ABRASIVES
• Aluminum alloy head,
1/8” thick tee-beam
has blunt teeth with a
notch
• Magnesium handle, lighter weight
than aluminum
ANCHORS
SIMPSON STRONG TIE
BLUE TITEN MASONRY SCREWS
BLUE TITEN MASONRY SCREWS
• SIMSTTN18214H – 3/16” x 2-1/4”
• SIMSTTN18214PF – 3/16” x 2-1/4”
• SIMSSL37178H – 3/18” x 1-7/8”
• SIMSTTN18234H – 3/16” x 2-3/4”
• SIMSTTN18234PF – 3/16” x 2-3/4”
• SIMSSL37300H – 3/8” x 3”
• SIMSTTN18314H – 3/16” X 3-1/4”
• SIMSTTN18314PF – 3/16” x 3-1/4”
• SIMSSL50214H – 1/2” x 2-1/4”
• SIMSTTN18334H – 3/16” X 3-3/4”
• SIMSTTN18334PF – 3/16” x 3-3/4”
• SIMSSL50300H – 1/2” x 3”
• SIMSTTN18400H – 3/16” X 4”
• SIMSTTN18400PF – 3/16” x 4”
• SIMSSL50600H – 1/2” x 6”
• SIMSTTN25114H – 1/4” x 1-1/4”
• SIMSTTN25114PF – 1/4” x 1-1/4”
• SIMSSL50400H – 1/2” x 4”
• SIMSTTN25134H – 1/4” x 1-3/4”
• SIMSTTN25134PF – 1/4” x 1-3/4”
• SIMSSL62214H – 5/8” x 2-1/4”
• SIMSTTN25214H – 1/4” x 2-1/4”
• SIMSTTN25214PF – 1/4” x 2-1/4”
• SIMSSL62414H – 5/8” x 4-1/4”
• SIMSTTN25234H – 1/4” x 2-3/4”
• SIMSTTN25234PF – 1/4” x 2-3/4”
• SIMSSL62600H – 5/8” x 6”
• SIMSTTN25314H – 1/4” x 3-1/4”
• SIMSTTN25314PF – 1/4” x 3-1/4”
• SIMSSL75212H – 3/4” x 2-1/2”
• SIMSTTN25334H – 1/4” x 3-3/4”
• SIMSTTN25334PF – 1/4” x 3-3/4”
• SIMSSL75414H – 3/4” x 4”
• SIMSTTN25400H – 1/4” x 4”
• SIMSTTN25400PF – 1/4” x 4”
• Hex nut
• Hex head anchor
• SIMSTTN25500PF – 1/4” x 5”
• Carbon steel preassmbled single unit
sleeve anchor
• Meets the needs of most light- to mediumduty applications in concrete, block and brick
• Phillips head anchor
• Used for concrete, block, brick and stone
SAFETY SUPPLIES
• SIMSTTN18134PF – 3/16” x 1-3/4”
• SIMSSL31212H – 5/16” x 2-1/2”
GENERAL SUPPLIES
• SIMSTTN18114PF – 3/16” x 1-1/4”
• SIMSTTN18134H – 3/16” x 1-3/4”
LANDSCAPING
• SIMSTTN18114H – 3/16” x 1-1/4”
• SIMSSL31112H – 5/16” x 1-1/2”
HAND TOOLS
SLEEVE-ALL
CONCRETE & MASONRY
ASPHALT LUTE HEAD – BTSSBTTLH36
MATERIAL HANDLING
ASPHALT LUTE HANDLE – BTSSBTTE6
LIGHT EQUIPMENT
ASPHALT LUTES
• Meets the needs of most light- to mediumduty applications in concrete, block and brick
WORKWEAR
39
LIGHT EQUIPMENT
CONCRETE & MASONRY
ANCHORS
SIMPSON STRONG TIE
STEEL DROP-IN
WEDGE ALL
POWER-STUD ANCHORS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• SIMSDIA25 – 1/4”
• SIMSDIA37 – 3/8”
• SIMSDIA50 – 1/2”
• SIMSWA25134 – 1/4” x 1-3/4”
• SIMSWA75414 – 3/4” x 4-1/4”
• SIMSDIA75 – 3/4”
• SIMSWA25214 – 1/4” x 2-1/4”
• SIMSWA75434 – 3/4” x 4-3/4”
• SIMSDIA62 – 5/8”
• SIMSWA25314 – 1/4” x 3-1/4”
• SIMSWA75512 – 3/4” x 5-1/2”
• Carbon steel machine bolt anchor
• SIMSWA37214 – 3/8” x 2-1/4”
• SIMSWA75614 – 3/4” x 6-1/4”
• Used on solid concrete, solid block and
hard stone
• SIMSWA37234 – 3/8” x 2-3/4”
• SIMSWA75700 – 3/4” x 7”
• SIMSWA37300 – 3/8” x 3”
• SIMSWA75812 – 3/4” x 8-1/2”
• SIMSWA37312 – 3/8” x 3-1/2”
• SIMSWA75100 – 3/4” x 10”
• SIMSWA37334 – 3/8” x 3-3/4”
• SIMSWA87600 – 7/8” x 6”
• SIMSWA37500 – 3/8” x 5”
• SIMSWA75120 – 3/4” x 12”
• SIMSWA37700 – 3/8” x 7”
• SIMSWA87800 – 7/8” x 8”
• SIMSWA50234 – 1/2” x 2-3/4”
• SIMSWA87100 – 7/8” x 10”
• SIMSWA50334 – 1/2” x 3-3/4”
• SIMSWA16000 – 1” x 6”
• SIMSWA50414 – 1/2” x 4-1/2”
• SIMSWA19000 – 1” x 9”
• SIMSWA50512 – 1/2” x 5-1/2”
• SIMSWA11200 – 1” x 12”
• SIMSWA50700 – 1/2” x 7”
• SIMSWA50812 – 1/2” x 8-1/2”
• Carbon steel plated with bright zinc
and chromate
• SIMSWA62312 – 5/8” x 3-1/2”
• Used on concrete and stone
• SIMSWA62412 – 5/8” x 4-1/2”
• SIMSWA62500 – 5/8” x 5”
• SIMSWA62600 – 5/8” x 6”
• SIMSWA62700 – 5/8” x 7”
HAND TOOLS
• SIMSWA62812 – 5/8” x 8-1/2”
• SIMSWA62100 – 5/8” x 10”
• Carbon steel plated with bright zinc
and chromate
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Used on concrete and stone
40
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
SIMPSON STRONG TIE
HEAD DRIVE PINS – SIMSPDP-300
HEAD DRIVE PINS W/ WASHER
• SIMSPDP-75 – .300 3/4”
• .300 3”
• SIMSPDPW-75 – .300 3/4”
• SIMSPDP-100 – .300 1”
• Designed for permanently fastening a fixture to concrete
• SIMSPDPW-100 – .300 1”
• SIMSPDP-125 – .300 1-1/4”
• SIMSPDP-150 – .300 1-1/2”
• SIMSPDP-175 – .300 1-3/4”
• SIMSPDP-200 – .300 2”
• SIMSPDP-250 – .300 2-1/2”
• Designed for permanently fastening a fixture
to concrete
• SIMSPDPW-150 – .300 1-1/2”
• Specially designed
point to allow proper
penetration
• SIMSPDPW-250 – .300 2-1/2”
• 14 gauge preassembled metal washers in
various diameters
• Designed for permanently fastening a fixture
to concrete
• Resistance to pullovers is increased by additional bearing surface due to washer
• Used for exterior insulation fastening systems,
waterproofing and membrane seams
• SIMSPDPW-200 – .300 2”
• 14 gauge preassembled metal washers in various diameters
• Plastic flute is mounted over the point to
retain the drive pin in the fastener guide of
the tool
• Resistance to pullovers is increased by additional bearing surface due to washer
HEAD DRIVE PINS W/ WASHER –
SIMSPDPW-300
POWER TOOLS
• Specially designed point to allow proper
penetration
CONCRETE & MASONRY
• SIMSPDP-225 – .300 2-1/4”
• SIMSPDPW-125 – .300 1-1/4”
MATERIAL HANDLING
HEAD DRIVE PINS
LIGHT EQUIPMENT
DRIVE PINS
• .300 3”
• Used for exterior insulation fastening systems,
waterproofing and membrane seams
BITS, BLADES
& ABRASIVES
• Designed for permanently
fastening a fixture to concrete
HAND TOOLS
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
41
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
EPOXY
SIMPSON STRONG TIE
POWER FAST EPOXY – POWS08402
POWER FAST EPOXY – POWS08422
• 15 fl oz
cartridge-fast set
• 24 fl oz
cartridge-fast set
• Used with either
manual or pneumatic
injection tools
• Used with either
manual or pneumatic
injection tools
CONCRETE BUCKETS
CENTER DISCHARGE COLLECTION HOPPER –
GARE803
ELEPHANT TRUNK – GARE913PVC
R SERIES – GARE427-R
• 30” x 30”
• 3-1/2” x 8-1/2”
• 1 cu yd
• 22” in height
• 8” inside diameter
• Lightweight round
gate bucket with 16”
diameter gate
POWER TOOLS
• 50’ maximum length
• Side chute optional
RUBBER ACCORDION – GARS409-E
SIDE CHUTE – GARE427-SC
• 8” discharge opening
• Side chute for
GARE427-R
• 1-1/2 cu yd
BITS, BLADES
& ABRASIVES
• For use on “R” Series
concrete buckets
diameter gate
• Side chute sold separately
• Side chute for
GARE440-R
• 2 cu yd
• Side chute for
GARE454-R
HAND TOOLS
diameter gate
• Side chute sold separately
• 8” diameter
• Has lip for use with PVC Elephant Trunk
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
STEEL COLLAR FOR USE WITH ELEPHANT
TRUNK – GARE908LIP
42
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
LIGHT EQUIPMENT
CONCRETE CART
CONCRETE CART – GARE706-R
• 6 cu ft
MATERIAL HANDLING
• Rocker style
ALL ANGLE BROOM ADAPTOR – KFTSCC493
• Adjustable angle
• 1-3/8” male
• 4 hole to 2 hole
• Used to convert threaded float brackets for
use with button handles
• Used with KFTSCC290
when mounting to a
metal bull float
EZY-TILT FRESNO/BROOM ADAPTOR –
KFTSCC295
EZY-TILT II – KFTSCC294
• Accepts broom
thread handle
EZY-TILT – KFTSCC290
• 2 hole bracket
• Rugged, lightweight
aluminum
• Accepts 1-3/8” and
1-3/4” diameter
button handles
• Pitch of blade is
controlled just by
turning handle
• Used for fresnos,
brooms, walking
edgers and groovers
• Pitch of blade is
controlled just by
turning handle
• Eliminates bending
and lifting
• Designed to fit all (2) or (4) hole metal bull
floats, no adaptor needed
FRESNO TROWEL ADAPTOR – KFTSCC662
THREADED BUTTON HANDLE ADAPTOR –
KFTSCC286
• 1-3/4” aluminum
(female)
• 1-3/4” aluminum (male)
• Allows finisher to use
lightweight button handles with threaded type
bracket assemblies
• Also can be used to adapt other bracket and
handle connections
• Also can be used to adapt other bracket and
handle connections
GENERAL SUPPLIES
• Allows finisher to use
lightweight button handles with threaded type
bracket assemblies
LANDSCAPING
• Adapts molded threaded handles to fit fresnos, brooms, walking
edgers and groovers
THREADED BUTTON HANDLE ADAPTOR –
KFTSCC285
HAND TOOLS
• Eliminates bending and lifting
• Made of rugged lightweight aluminum
BITS, BLADES
& ABRASIVES
CONVERTER PLATE – KFTSCC287
POWER TOOLS
• Cut out section of
adaptor fits over
broom bracket
BUTTON HANDLE STYLE ADAPTOR –
KFTSCC334
CONCRETE & MASONRY
CONCRETE TOOL
ADAPTERS
SAFETY SUPPLIES
WORKWEAR
43
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CONCRETE TOOL
BRACKETS
BUTTON FRESNO/BROOM BRACKET –
KFTSCC666
FRESNO OR BROOM BRACKET – KFTSCC665
• Attaches to single
action fresno or broom
to lock the handle at
the best angle
• Attaches to single
action fresno or broom
to lock the handle at
the best angle
• 5” x 24”
• Use with 1-3/4” and
1-3/8” button handles
• Use with 1-3/4” and
1-1/4” threaded handles
• EZY-Tilt bracket eliminates bending and lifting. Controls blade pitch with turn of handle.
FRESNO TROWEL-EZY-TILT BRACKET –
KFTSCC832
KFTSCC834
KNUCKLEHEAD II BULL FLOAT BRACKET –
KFTSCC296
• 5” x 36”
• 5” x 48”
• Quality tempered steel
blade with square steel
mounting
blade with square
steel mounting
• Made of rugged lightweight aluminum
• EZY-Tilt bracket eliminates bending and lifting. Controls blade pitch with turn of handle.
• EZY-Tilt bracket eliminates bending and lifting.
Controls blade pitch with turn of handle.
• Bracket features quick and easy coupling for
either 1-3/4” or 1-3/8” button handle
LANDSCAPING
• One to one turning
ratio of handle and
pitch of blade
• Protected grease reservoir for longer wear
• Turning handle eliminates bending and lifting
CONCRETE TOOL HANDLES
ALUMINUM BUTTON HANDLE WITH INSERT
ALUMINUM THREADED HANDLE
ALUMINUM THREADED HANDLE – KFTSCC670
• KFTSCC289 – 6’
• KFTSCC236 – 6’
• 6’
• KFTSCC289-01 – 6’
double button clip
• KFTSCC238 – 8’
• Molded thread plugs
in each end join
handles together
• Molded thread plugs
in each end join
handles together
• Lightweight
aluminum handle
MAGNESIUM THREADED HANDLE –
KFTSCC226
• 6’
GENERAL SUPPLIES
blade with square steel
mounting
• KFTSCC291 – 10’
• Fits bull float/fresno threaded brackets and
can be combined with 1-3/4” float handles
made by other manufacturers
• Fits bull float/fresno
threaded brackets and
REPLACEMENT HANDLE – KFTSCC107
WOOD DRILLED COUNTERSUNK HANDLE –
KFTSCF262
• 54” wood jam
replacement handle
• Threaded handles are
lightweight, extra
strong
• 10”
• Replacement handle
• Magnesium does not
turn hands black from oxidation
• Fits bull float/fresno threaded brackets and
• Molded thread plugs in each end joins handles
together
WORKWEAR
SAFETY SUPPLIES
KFTSCC830
44
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
LIGHT EQUIPMENT
CONCRETE TOOL HANDLES
WOOD HANDLE – KFTSCC386
• 5’ with bronze clevis
MATERIAL HANDLING
• For long handle bronze
& stainless steel tools
CONCRETE TOOLS MISCELLANEOUS
• 48” x 8”
• Rugged and durable,
built to handle any job
TIE WIRE TWISTER – KFTSGG310
• Designed to twist
wire bar ties with
minimum effort
• Lets you do the job
right, quickly and safely
• Fitted with wood handle
POWER TOOLS
• Tamping with this tool
pushes large aggregate
to the bottom to add
strength
CONCRETE & MASONRY
CONCRETE TAMPER-ROUND HOLE –
KFTSCC885
• Adds fat to the top for easy finishing
CONCRETE TOOLS BARS
BITS, BLADES
& ABRASIVES
ROCKER HEAD PRY BAR – KFTSGG634
• 48”
• Unique rockerhead
for more power
without blocking
HAND TOOLS
• Unique push/pull
action makes even the toughest job simple
• Open claw design works in tight places
• Double claw for hard to reach areas
CONCRETE TOOLS BROOMS
CONCRETE FINISHING BROOM-WOOD
CONCRETE FINISHING BROOM-WOOD
• KFTSCC176 – 48”
natural horsehair &
poly blend
• KFTSCC164 – 18”
• KFTSCC170 – 24”
medium-general
purpose
• KFTSCC178 – 48” medium-general purpose
• KFTSCC179 – 36” extra soft
• KFTSCC180 – 36” natural horsehair
& poly blend
• Brush down new concrete after floating
• KFTSCC166 – 36”
• KFTSCC194 – 36”
horsehair
• Soft, plastic bristle,
designed to give a fine
finish on newly poured concrete
• KFTSCC172 – 36”
medium-general
purpose
• Brushes down new concrete after floating
• Made from solid hardwood lacquered blocks
GENERAL SUPPLIES
• KFTSCC177 – 36” medium-general
purpose
• KFTSCC165 – 24”
LANDSCAPING
CONCRETE FINISHING BROOM-ALUMINUM
• Long wearing bristles are set solidly in wood
• All brooms come with a 5’ wood handle
• 36” “The Performer”
SAFETY SUPPLIES
CONCRETE FINISHING BROOM-WOOD –
KFTSCC256
• Three rows of black
nylon bristles
• Fits any standard threaded handle
• Accepts standard broom handles
WORKWEAR
• Adaptor included
45
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CONCRETE TOOLS CORNER TOOLS
INSIDE STEP AND CORNER TOOL
• KFTSCF122 –
6” x 2-1/2” x 1/2”
• KFTSCF124 –
6” x 2-1/2” x 2-1/2”
• Stainless steel
CONCRETE TOOLS CURB TOOLS
CURB BRUSH – KFTSCC169
CURB TOOL – KFTSCF193
SIDEWALK AND CURB TOOLS – KFTSCF146
• 12” wood
• 6” x 5” x 2”
• 6” x 4” x 1/2”
• For hand brushing
newly laid finished concrete surfaces
• Stainless steel
• Stainless steel
• Outside nose tool with
1-1/2” lip
• Soft plastic fiber bristles
• Perfect for those small jobs
• 6” x 4” x 3/4”
• 6” x 4” x 1/2”
• Stainless steel
• Stainless steel
• Outside nose tool with
1-1/2” lip
• Inside cove tool with
1-1/2” lip
CONCRETE TOOLS DARBIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
TAPERED MAGNESIUM DARBY – KFTSCF030
TAPERED MAHOGANY DARBY
• KFTSCF236 –
36” 1 hole grip
• 30”
• KFTSCF258 –
28” 1 hole grip
• The most popular lightweight 30” darby for
precision finish work
• KFTSCF259 – 45” 3 hole grip
• 3-1/2” wide at the heel, tapered to 2-1/4” at
the toe
• Finished smooth
• Comes with standard float handle
• Made of clear seasoned wood
• Very popular with many concrete finishers
CONCRETE TOOLS DISPLACERS
CONCRETE DISPLACER
• KFTSCC009 – 19-1/2” x 4” w/o hook
• KFTSCC019 – 19-1/2” x 4” w/ hook
• Smooths, spreads and
grades concrete
• 54” wood jam handle
WORKWEAR
SAFETY SUPPLIES
• #14 gauge steel blade
46
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
CURVED END EDGER – KFTSCF141
FLEXIBLE BLUE STEEL EDGER
• 6” x 2-3/4”
• 6” x 3”
• One piece edger
• Stainless steel
has turned up ends
to prevent gouging
of concrete
• KFTSCF569 – 6” x 3”,
3/8” radius
• Curved up ends and
a belt polished
surface gives clean,
smooth edges
• Wood handle
• Easy to clean and comfortable to use
• KFTSCF570 – 6” x 3”,
1/2” radius
• KFTSCF574 – 6” x 4”,
1/2” radius
• KFTSCF575 – 6” x 6”, 1/4” radius
• KFTSCF579 – 6” x 6”, 1/8” radius
• Tempered crucible spring steel
• Flexible lightweight blade
• Wood handle
SINGLE ACTION TWO-WAY WALKING EDGER
STAINLESS STEEL HAND EDGER/GROOVER
• KFTSCF139 –
6” x 3/4” x 1”
• KFTSCC242-01 – 10” x 6” edger only
• KFTSCF046 – 6” x 8”, 1/2” radius, 1/4”
groover
• KFTSCF162 –
2-1/2” x 1/4” x 3/8”
• 1/2” radius, 5/8” lip
• KFTSCC243-01 – 10” x 10” edger only
• KFTSCF163 –
3” x 1/4” x 3/8”
• KFTSCF164 – 3-1/2” x 3/8” x 1/2”
• KFTSCF172 – 4” x 1/4” x 3/8”
• KFTSCF173 – 4” x 3/8” x 1/2”
• KFTSCF174 – 4” x 3/4” x 1”
• Reinforced with electrically welded back plate
to which the handle
attachment is fastened
• Handle can be tightened so you can flip it
from one side to the other
• An exceptionally handy
tool for most commercial jobs
• Forms top of curb and
cuts grooves in one
pass
BITS, BLADES
& ABRASIVES
• KFTSCF165 – 4” x 1/2” x 5/8”
• Heavy gauge stainless
steel
• KFTSCF149 – 6” x 8”, 1/2” radius, 1/4”
froover
POWER TOOLS
SIDEWALK EDGER
CONCRETE & MASONRY
• KFTSCF577 – 6” x 6”, 1/2” radius
MATERIAL HANDLING
BRONZE EDGER – KFTSCF311
LIGHT EQUIPMENT
CONCRETE TOOLS EDGERS
• KFTSCF175 – 6” x 1/2” x 5/8”
• Wood handle
WALKING EDGER WITH HANDLE
WOCKET BRACKET
• 9” x 6” edger only
• KFTSCC350 – 10” x 6”
• The edger blade “gives”
a little for just the right
feel when working
• KFTSCC351 – 8” x 5”
• Heavy gauge stainless
steel
• Reinforced with an
electrically welded back plate to which the
handle attachment is fastened
LANDSCAPING
TWO WAY BLUE STEEL WALKING EDGER –
KFTSCC395-01
HAND TOOLS
• Stainless steel and rivet free
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
47
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CONCRETE TOOLS FLOATS
ALUMINUM BULL FLOAT – KFTSCC773
BEVELED REDWOOD FLOAT
• 48” x 7-1/4”
• KFTSCF256 –
15” x 3-1/2”
• Multi ribbed for
extra strength
• Lightweight but strong; engineered for proper
balance and long wear
• Complete with (4) hole bracket assembly. Use
with threaded handles.
BIG “D” BLUE STEEL BULL FLOAT –
KFTSCC750
• 48” x 12”
• Made of selected redwood
• Carbon blue steel
blade with rounded
ends for producing a
super smooth finish
• The float face is beveled to make it possible to
work in the tightest quarters
• Heavy-duty C-channel design for extra rigidity
and flatness
• KFTSCF257 –
18” x 3-1/2”
• Fitted with Kraft EZY-Tilt II bracket. Uses button handle.
• Float will adapt to either 2-hole or 4-hole float
bracket
BRONZE BULL FLOAT GROOVER BIT –
KFTSCC940
KFTSCC941
KFTSCC943
• 3/4” x 1/4” x 1/2”
• 1” x 1/4” x 1/2”
• 2” x 1/4” x 1/2”
• Attaches with two
thumbscrews
thumbscrews
thumbscrews
• Use bull float
as groover
• Use bull float
as groover
• Use bull float
as groover
• Mount as many groovers as needed
• Works on 8” wide bull floats
ECONO MAG FLOAT WOOD HANDLE –
KFTSCF065
LAMINATED CANVAS RESIN FLOAT
MAGNESIUM BULL FLOAT-ROUND –
KFTSCC803
• 16” x 3-1/8”
• KFTSCF505 – 16” x 3-12”
• 48” x 8”
• Made of the same hard
magnesium used in
other extruded floats
• KFTSCF506 – 18” x 3-1/2”
• Lightweight and
longer lasting
than aluminum alloy
• KFTSCF507 – 20” x 3-1/2”
• Thin edges and smooth
rounded corners gives this float that perfect
“broken-in” feel
• Wears like magnesium for extremely
long wear
• Float blade is “broken-in”, curved and balanced to prevent digging
• Lightweight
• Laminated canvas
resin is 3/8” thick
rounded corners and broken in face
• Used with threaded handles. Bull float can be
adapted to EZY-Tilt adjustable bracket.
KFTSCC805
KFTSCC806
MAGNESIUM BULL FLOAT-SQUARE –
KFTSCC801
• 42” x 8”
• 48” x 8”
• 42” x 8”
extra strength
extra strength
• Provides a smooth finish on all concrete jobs
• Provides a smooth finish on all concrete jobs
• Lightweight
and longer
lasting than aluminum alloy
• Complete with (2) hole bracket assembly.
Used with threaded handles.
• Complete with (2) hole bracket assembly.
Used with threaded handles.
WORKWEAR
SAFETY SUPPLIES
• Complete with (4) hole bracket assembly
48
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
LIGHT EQUIPMENT
CONCRETE TOOLS FLOATS
MAGNESIUM FLOAT WITH PROFORM HANDLE
– KFTSCF016PF
• 48” x 8”
• 16” x 3-1/4”
• Lightweight and
longer lasting
than aluminum alloy
• ProForm handle,
position gives this
float perfect balance
• Tough durable extru-lite magnesium blade
• Both ends are beveled and the blade is “broken-in” with rounded corners
MAGNESIUM FLOAT WITH WOOD HANDLE –
KFTSCF016M
• 20” x 3-1/4”
• 12” x 3-1/4”
• 16” x 3-1/4”
• ProForm handle, position gives this float
perfect balance
• Wood handle, position gives this float
perfect balance
• High lift wood handle,
position gives this
• Both ends are beveled and the blade is
“broken-in” with rounded corners
MINI BULL FLOAT – KFTSCC816
REDWOOD FLOAT – KFTSCF251
ROUNDED END MAGNESIUM FLOAT WOOD
HANDLE – KFTSCF076
• 36” X 3-1/4”
• 12” x 4-1/2”
• 16” x 3-1/4”
• Unique T-slotted reinforcing
rib (no threads to strip) adds strength and
allows threaded bracket to be quickly set off
center to work float around obstructions
• Top quality redwood
floats with comfortable handles
• This magnesium
hand float has both
ends rounded and
“broken-in”
• Lightweight, a pleasure to work with
• It makes floating easier and does a much
better job than most hand floats
TEAKWOOD FLOAT – KFTSCF269
THIN LINE PRO MAG FLOAT WOOD HANDLE –
KFTSCF064
WIDE MAGNESIUM FLOAT WITH PROFORM
HANDLE – KFTSCF015PF
• 18” x 3-1/4”
• 16” x 3-1/8”
• 16” x 3-1/2”
• Very hard, long wearing 5/8” thick float
• Cast from durable
magnesium for extra
strength
• ProForm handle,
position gives this
• Thin edges and smooth rounded corners gives
this float that perfect “broken-in” feel
• This float is also ideal for floating lightweight
concrete on roof decks
HAND TOOLS
• You’ll have many uses for this
• The two wood float handles can also be
moved easily for hand and curb work
BITS, BLADES
& ABRASIVES
MAGNESIUM FLOAT WITH WOOD HANDLE –
KFTSCF012
POWER TOOLS
MAGNESIUM FLOAT WITH PROFORM HANDLE
– KFTSCF020PF
CONCRETE & MASONRY
MATERIAL HANDLING
MAGNESIUM BULL FLOAT-SQUARE –
KFTSCC802
• Use with threaded handles
WOOD FLOAT HANDLE – KFTSCF261
• 16” x 3-1/2”
• 10”
• Wood handle, position
gives this float perfect
balance
• Replacement
handle
SAFETY SUPPLIES
WIDE MAGNESIUM FLOAT WITH WOOD HANDLE – KFTSCF015
GENERAL SUPPLIES
• Float design allows for more knuckle clearance
LANDSCAPING
• 10” wood handle
WORKWEAR
49
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CONCRETE TOOLS FLOOR SCRAPERS
HEAVY-DUTY FLOOR SCRAPER
HEAVY-DUTY FLOOR SCRAPER
T-HANDLE FLOOR SCRAPER – KFTSGG393
• KFTSCC207 – 14”
replacement blade
• KFTSCC214 – Floor scraper with 14” blade
• 7” blade
• KFTSCC208 – 18”
replacement blade
• 54” long all steel floor
scraper
• Ideal for after work
clean-up
• All steel “T” handle for
extra leverage
• Scraper blades are firm
but flexible
• Shaves all kinds of floor
coverings on any type
of floor
• Comes with heavy-duty
5’ shovel type wood
handle
CONCRETE TOOLS FRESNO TROWEL
ALL ANGLE STEEL FRESNO TROWEL-ROUND
BRONZE FRESNO TROWEL GROOVER BITS
• KFTSCC850 – 30” x 5”
• KFTSCC623 – 1/2”
• KFTSCC851 – 36” x 5”
• KFTSCC625 – 3/4”
• Made of high
quality tempered steel for
a perfect finish
• Change your fresno
into a long handled
groover
• 360 degree all-angle bracket lets you work at
any angle
• Fits 5” wide fresnos
• Use more than one to make parallel groves
• Use fresno adaptors for handle attachment
HAND TOOLS
LANDSCAPING
• 24” X 5”
• Made of tempered carbon steel for long lasting use
• Unique design bracket has teeth to keep handle at set angle without slippage
• Use with threaded handles
• Attach bronze fresno groover attachment for
grooving
GENERAL SUPPLIES
FRESNO TROWEL-ROUND – KFTSCC820
CONCRETE TOOLS GROOVERS
ALL ANGLE WALKING GROOVER –
KFTSCC347-01
BRONZE GROOVERS
UNIVERSAL GROOVER – KFTSCF118
• 8” x 6” groover only
• KFTSCF303 – 6” x 4-1/2” large bit
• 6” x 3”
• Made of heavy gauge
stainless steel
• KFTSCF304 – 6” x 4-1/2” big bit
• Reinforced with an
electrically welded back
plate to which the all
angle attachment is fastened
• KFTSCF314 – 6” x 4-1/2” deep bit
• Popular among concrete finishers from
coast to coast
• Hand-crafted with belt
polished surface
• This groover lasts
longer because it is
rivet free
• No rivet break up, completely smooth face
• Made of high-quality,
long-wearing bronze
• Cuts a clean 1/2” x 1/2” groove
• KFTSCF305 – 6” x 4-1/2” narrow bit
• Cuts clean sharp
grooves
WALKING BRONZE GROOVER – KFTSCC276-01
• Lets you easily handle
professional concrete
paving finish work
WORKWEAR
SAFETY SUPPLIES
• 8” x 8” groover only
50
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
LIGHT EQUIPMENT
CONCRETE TOOLS GUTTER TOOLS
GUTTER TOOL – KFTSCF196
• 6” x 4-1/2” x 2”
MATERIAL HANDLING
• Stainless steel
CONCRETE & MASONRY
CONCRETE TOOLS
CONCRETE PLACERS
GOLD STANDARD CONCRETE PLACER
• KFTSCC944 – 19-1/2” x 4” w/o hook
• KFTSCC945 – 19-1/2” x 4” w/ hook
POWER TOOLS
• Made of strong lightweight aluminum
• 60” aluminum handle
with textured foam grip
welded to blade
• Two aluminum braces for added strength
FLUTED RUB BRICK – KFTSCF282
• 8” x 3-1/2” x 1-1/2”
• 6” x 3” x 1”
• 6” x 3” x 1”
• 20 grit
• 60 grit
• 20 grit
• Fluted silicon carbide
rub brick with a contoured handle to minimize fatigue
• Preferred by finishers for fast and easy concrete smoothing and dressing down.
MAGNESIUM SCREED
LANDSCAPING
CONCRETE TOOLS SCREEDS
HAND TOOLS
BITS, BLADES
& ABRASIVES
CONCRETE TOOLS RUB BRICKS
• KFTSCC610 – 10’ x 1-1/2” x 3-1/2”
• 30% lighter than aluminum alloy screeds
• Working edge is 50%
thicker than aluminum
alloy screeds
GENERAL SUPPLIES
• KFTSCC616 – 16’ x 1-1/2” x 3-1/2”
• Magnesium will last 3 times longer due to the
release of alkaline in the concrete process
SAFETY SUPPLIES
WORKWEAR
51
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CONCRETE TOOLS SPREADERS
HEAVY-DUTY CONCRETE SPREADER –
KFTSCC901A
LIGHTWEIGHT CONCRETE SPREADER –
KFTSCC904A
LIGHTWEIGHT CONCRETE SPREADER –
KFTSCC905
• 20” x 5” w/o hook
• 19-1/2” x 4” w/o hook
• 19-1/2” x 4” w/hook
• Made of 12 gauge, cold
rolled steel
• Heavy-duty 60”
wood handle
• Two aluminum braces
for added strength
• Two aluminum braces for added strength
CONCRETE TOOLS TROWEL BLADES
TROWEL BLADES
• KFTSSK100 – 6” x 14” finish
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• KFTSSK101 – 8” x 14” combination
• Made of heavy-duty
steel to exacting
specifications
• Use with Wacker
WACECT36 trowel
CONCRETE TOOLS TROWELS
BLUE STEEL POOL TROWEL WITH
LONG SHANK
CONCRETE FINISHING TROWEL
CONCRETE FINISHING TROWEL
• KFTSCF737B – 16” x 4”
• KFTSCF211C – 12” x 3”
• KFTSCF212PF – 12” x 4”
• KFTSCF738B – 18” x 4”
• KFTSCF212C – 12” x 4”
• KFTSCF216PF – 14” x 3”
• Flexible steel blade
• KFTSCF217C – 14” x 4”
• KFTSCF217PF – 14” x 4”
• KFTSCF222C – 16” x 4”
• KFTSCF221PF – 16” x 3”
• KFTSCF227C – 18” x 4”
• KFTSCF222PF – 16” x 4”
• KFTSCF231C – 20” x 4”
• KFTSCF227PF – 18” x 4”
• Camel back wood handle
• KFTSCF231PF – 20” x 4”
• ProForm handle
SWEDISH STAINLESS STEEL POOL TROWEL
• KFTSCF327PF – 14” x 4”
• KFTSCF328PF – 16” x 4”
DRYWALL TOOLS
T-SQUARE – KFTSDW221
UNOMIXER – KFTSDC363
UTILITY DRYWALL SAW – KFTSDW243
• 1/8” thick, 2” wide
• 3-1/4” x 30”
• Silver anodized 48”
T-square with black
easy to read markings
• Ideal for fast mixing of
all kinds of materials,
from paint to cement
• Rugged constructed
with sharp point for
easy penetration
• Has stud locator markings, a notched head
and is reverse ruled to
read from either edge
• For use in a 1/2” drill chuck
• Heat treated
aggressive 6” blade
• Anchored into hardwood handle with steel
ferrule to prevent splitting
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• ProForm handle
52
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
DELUXE HEAVY-DUTY KNEE BOARDS –
KFTSCC150
EZ-KNEELER KNEEBOARD – KFTSWL069
• 30” x 10” (pair)
• 31” x 8” (pair)
• 14” x 24”
• Made of lightweight,
tough, heavy-duty
polystrene plastic
• 16 gauge polished
stainless steel
• Reduced corrosive
problems
• 2” thick rubber cushion
securely fastened to a
poly propylene tray for
maximum comfort and long life
• Reinforced and contoured on the bottom to
prevent digging in
• It is a favorite of concrete finishers and tile
installers
• Easy to use, easy to clean
• One size fits all
• Adjustable knee pads are replaceable and
allow a “comfort fit”
FOAM RUBBER KNEE PADS – KFTSWL135
FOAM RUBBER KNEE PADS – KFTSWL136
LEATHER KNEE PADS – KFTSWL087
• Professional foam rubber hard shell knee
pads
• Non skid, rubber cap
prevents sliding and
marring of surfaces
• 1/2” thick felt
• Contoured cap provides
extra support and comfort for heavy use
• Professional foam
rubber hard shell
knee pads
• Lined with felt and
shaped to fit your knee
• Velcro closures are
easy to use and adjust
• Contoured cap provides
extra support and comfort for heavy use
• One adjustable strap holds pad securely
CONCRETE & MASONRY
• Knee pads are replaceable
MATERIAL HANDLING
CONCRETE SLIDERS KNEE BOARDS –
KFTSCC153
LIGHT EQUIPMENT
KNEE BOARDS
• Tough leather makes
for long wear
POWER TOOLS
• Rivet construction holds soft felt in place
• Velcro closures are easy to use and adjust
BITS, BLADES
& ABRASIVES
LIGHTWEIGHT KNEE BOARDS – KFTSCC162
• 28” x 8” (pair)
• 18 gauge stainless steel
• Durable and easy
to use
HAND TOOLS
• Knee pads are
replaceable
MASONRY TOOLS MISCELLANEOUS
BRAIDED MASON’S LINE EZ WINDER –
KFTSBC342W
• KFTSBC340 – 500’ Tube/White
• 500’ Tube/Yellow
• KFTSBC341 – 500’ Tube/Green
• Braided nylon line
• KFTSBC346W – 500’
Tube/Flo Orange
• KFTSBC342 – 500’ Tube/Yellow
• EZ winder make
unwinding and winding a snap
• KFTSBC352W – 500’
Tube/White & Black
• Braided nylon line
BRAIDED MASON’S LINE EZ WINDER
LANDSCAPING
BRAIDED MASON’S LINE
• Twisted nylon line
• 120 lb test
• Built in elasticity, eliminates sagging
• Not affected by mortar, oil or mildew
MORTAR BOX – KFTSBC210
SKATE WHEEL JOINT RAKER – KFTSBL210
• 10-1/2” x 24” large
• 10 cu ft
• Cone shaped heavy-duty
vinyl bag comes complete
with removable tip
• #10 gauge heavyduty steel
• Big wheeled joint raker,
1-3/4” diameter wheels
• 6” forklift clearance
• Heavy-duty reinforced top lip
• Joints lapped with continuous welds for
extra strength
• Overall width is 3”
• 8-1/2” aluminum handle
squared off at the end
so you can rod joints
SAFETY SUPPLIES
GROUT BAG – KFTSWL013
GENERAL SUPPLIES
• 170 lb test
• Hardened nail is adjusted for depth
• 22”W x 57”L x 24” H
WORKWEAR
53
LIGHT EQUIPMENT
CONCRETE & MASONRY
MASONRY TOOLS MISCELLANEOUS
SPACING RULE – KFTSBL167
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 6’ wood
• Ten course spacing
on one side
• Inches, eighths
and sixteenths on
other side
• Joints are lubricated for smooth opening
and closing
MASONRY TOOLS BRICK TOOLS
BRICKLAYERS BRICK HAMMER – KFTSBL255
BRICKLAYERS BRICK HAMMER – KFTSBL256
BRICKLAYERS LINE BLOCK – KFTSBL348
• 18 oz, 11-1/4” handle
• 24 oz, 11-1/4” handle
• 4-1/4” pair
• Forged from high
quality tool steel
• Forged from high
quality tool steel
• Comes with a
smooth comfortable
wood handle
• Comes with a
smooth comfortable
wood handle
• Grips the wall
tightly and will not
split or break
• Made of hard tenite
(plastic)
MASONRY TOOLS BRUSHES
HEAVY-DUTY ACID BRUSH – KFTSBL430
HEAVY-DUTY ACID BRUSH – KFTSBL525
JUMBO UTILITY BRUSH – KFTSBL526
• 8-1/2” x 2” (brush only)
• 8-1/4” x 3” (brush only)
• 6-1/2” x 2” x 4”
• Leather binding and
holding capacity
• Use with any
length handle
• Red handle utility brush
• Fine tampico fibered
brush with 3” long fibers
• Smooth finished
hardwood block
• Cemented into hardwood block
• 18 x 7 rows of stiff
white tampico bristles 1-1/4” long
• Uses tapered wood handle
• Long wearing, white
tampico fibers
• Used on masonry,
brick, tile and stone
• Truly versatile brush
• Used with threaded wood handle only
LANDSCAPING
LONG ARM ACID BRUSH – KFTSBL523
• 20” handle, plastic bristles
• 2” fiber gives just
the right spring to
the bristles
SAFETY SUPPLIES
GENERAL SUPPLIES
• Brush face is 5” x 6”
• Handle is smooth,
tumbled block that is easy to grasp
MASONRY TOOLS JOINTERS
HUBBARD JOINTER – KFTSBL280
HUBBARD JOINTER
• 1/2”, 5/8”, 3/4”
& 7/8” blades
• KFTSBL281 – 1/2”
replacement blade
• More knuckle clearance
• KFTSBL282 – 5/8”
replacement blade
• Replaceable blades
WORKWEAR
• Long lasting
54
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
• KFTSBL761 – 7” X 3/16”
• 5” x 1-3/4”
• 7” x 3-1/4”
• KFTSBL762 – 7” x 1/4”
• One piece forged
• KFTSBL763 – 7” x 3/8”
• Tempered, ground
and polished for
perfect balance
and polished for
perfect balance
• Hardwood handle
• Hardwood handle
MARGIN TROWEL
MARGIN TROWEL – KFTSGG433
NARROW LONDON BRICK TROWEL –
KFTSBL705
• KFTSGG431 – 5” x 1-1/2”
• 8” x 2”
• 11” x 5”
• KFTSGG432 – 5” x 2”
and polished for
perfect balance
• One piece forging
made from the highest grade trowel steel
• KFTSBL764 – 7” x 1/2”
• KFTSBL766 – 7” x 3/4”
• KFTSBL768 – 7” x 1”
• Tempered, ground and polished for
perfect balance
• Hardwood handle
and polished for
perfect balance
• Hardwood handle
• Hardwood handle
• Taper ground
for flexibility
POWER TOOLS
GAUGING TROWEL – KFTSGG443
CONCRETE & MASONRY
CROSS-JOINT TROWEL – KFTSGG445
MATERIAL HANDLING
CAULKING TROWEL
LIGHT EQUIPMENT
MASONRY TOOLS TROWELS
• Precision balanced
POINTING TROWEL
• KFTSGG421 – 4-1/2” x 2-1/4”
BITS, BLADES
& ABRASIVES
• Fitted with hardwood handle
• KFTSGG422 – 5-1/2” x 2-1/2”
• KFTSGG424 – 5” x 2-1/2”
and polished for
perfect balance
HAND TOOLS
• Hardwood handle
ALUMINUM HAWKS – KFTSPL513
LANDSCAPING
PLASTER TOOLS MISCELLANEOUS
• 13” x 13”
• Detachable wooden
handle with threaded bolt and sponge rubber
callous preventer
FINE CELL RUBBER FLOAT
• KFTSPL371P – 8” x 4” x 5/8”
SAFETY SUPPLIES
PLASTER TOOLS FLOATS
GENERAL SUPPLIES
• Smooth straight edges
with rounded corners
• KFTSPL372P – 10” x 4” x 3/4”
• Plastic handle
WORKWEAR
• Fine cell red sponge
rubber pad securely
cemented to flat
aluminum back
55
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
TILE & CARPET TOOLS
GROUT SPONGE – KFTSTL475
NOTCH TROWEL – KFTSTL359
TURTLE BACK SPONGE – KFTSPL600
• 7-1/2” x 5-1/4” x 2-1/4”
• 1/4” x 3/16”
• 7-1/2” x 3-1/2” x 2”
• Large water
holding capacity
• Used for ceramic tile,
metal tile and aluminum tile
• Durable
cellulose sponge
• Soft to prevent digging or marring of grout
• Keeps its shape to
always fit your hand
• Holds water exceptionally well, washes clean
CONCRETE TUBES
EASY POUR FORMS
• MAYS6-IN-KOL – 6”
POWER TOOLS
BITS, BLADES
& ABRASIVES
HAND TOOLS
• Pour perfect, cylindrical columns of concrete
• Provides a finished surface on the column,
largely eliminating the cost of additional
finishing work
• Lightweight and easy to cut
LANDSCAPING
• Sold in 12’ sections
CONCRETE FORMS
CONCRETE FORMS
SAFETY SUPPLIES
GENERAL SUPPLIES
• JTCS4X10 – 4” x 10’ 1 pocket
• JTCS6X10 – 6” x 10’ 2 pocket
• JTCS12X10 – 12” x 10’ 3 pocket
• Heavy-duty, reinforced with 3/16” angle to
eliminate all end damage
• 3/16” stake pockets designed to accommodate
form pins with heavy-duty permanently
attached locking wedge
• Two brace angles to reinforce top and bottom
rails and to attach hook brace when necessary
• 3/16” angle to reinforce female end to eliminate damage
WORKWEAR
• Heavy-duty special alloy 10 gauge steel
sheared and squared to eliminate deflection
56
• 2” top and bottom rails to enable forms to set
in either direction
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
SOLID STEEL FORM PINS
• JTCS3/4X24SS – 3/4” x 24”
• JTCS3/4X30SS – 3/4” x 30”
• JTCS3/4X36SS – 3/4” x 36”
MATERIAL HANDLING
• JTCS3/4X18SS – 3/4” x 18”
LIGHT EQUIPMENT
FORM PINS
• JTCS3/4X48SS – 3/4” x 48”
NAIL STAKES
ROUND NAIL STAKES
• JTCS3/4X24RS – 3/4” x 24”
• JTCS3/4X30RS – 3/4” x 30”
POWER TOOLS
• JTCS3/4X18RS – 3/4” x 18”
CONCRETE & MASONRY
• For use with steel forming systems
• JTCS3/4X36RS – 3/4” x 36”
• JTCS3/4X42RS – 3/4” x 42”
• JTCS7/8X24RS – 7/8” x 24”
• JTCS7/8X30RS – 7/8” x 30”
BITS, BLADES
& ABRASIVES
• JTCS7/8X18RS – 7/8” x 18”
• JTCS7/8X36RS – 7/8” x 36”
• 12 spirally arranged holes on 1” centers
HAND TOOLS
• Nail holes are staggered to allow positive nailing despite twisting of stake due to variable
ground conditions
STAKE PULLER
• Will pull round
nail stakes
LANDSCAPING
MODEL E PULLER – JTCSMODELE
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
57
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
PAVEMENT BREAKER TOOLS
3” WIDE CHISEL
5” ASPHALT CUTTER – VULS1045-1-1/8
2” SCALING CHISEL
• VULS1040-1-1/8X14 – 1-1/8” x 6” x 14”
• 1-1/8” x 6” x 11”
• VULSFO2802 – 9”
• VULS1041-1-1/8X18 – 1-1/8” x 6” x 18”
• VULSFO2812 – 12”
• VULS1042-1-1/4X14 – 1-1/4” x 6” x 12”
• Round shank, oval collar
• VULS934-7/8X14 – 7/8” x 3-1/4” x 14”
• VULS936-1X14 – 1” x 4-1/4” x 14”
• VULS937-1X18 – 1” x 4-1/4” x 18”
BULL POINT – VULSFO121
BULL POINT – VULSFO122
BULL POINT – VULSG121
• 12”
• 18”
• 12”
• Hex shank, round collar
BULL POINT – VULSGO122
BUSH TOOL – VULSFO240
FLAT CHISEL
• 18”
• 9-3/4”
• VULSFO180 – 9”
• Hex shank, oval collar
• 16 teeth
• VULSFO181 – 12”
• VULSFO182 – 18”
• Hex shank, oval collar
BITS, BLADES
& ABRASIVES
MOIL POINT
• VULS1011-7/8X14 – 7/8” x 3-1/4” x 14”
• VULS1013-1X14 – 1” x 4-1/4” x 14”
• VULS1014-1X18 – 1” x 4-1/4” x 18”
HAND TOOLS
• VULS1019-1-1/8X14 – 1-1/8” x 6” x 14”
• VULS1020-1-1/8X18 – 1-1/8” x 6” x 18”
NARROW CHISEL
H THREAD ROD
• VULS1030-1-1/8X14 –
1-1/8” x 6” x 14”
• VULS520-1-1/2 – 7/8” x 3-1/4” x 1-1/2’
• VULS1031-1-1/8X18 –
1-1/8” x 6” x 18”
• VULS520-3 – 7/8” x 3-1/4” x 3’
• VULS923-7/8X14 –
7/8” x 3-1/4” x 14”
• VULS520-6 – 7/8” x 3-1/4” x 6’
• VULS925-1X14 –
1” x 4-1/4” x 14”
• VULS520-2 – 7/8” x 3-1/4” x 2’
• VULS520-4 – 7/8” x 3-1/4” x 4’
• VULS522-1-1/2 – 1” x 4-1/4” x 1-1/2’
• VULS522-2 – 1” x 4-1/4” x 2’
• VULS522-3 – 1” x 4-1/4” x 3’
• VULS1020-4-11/8X48 – 1-1/8” x 6” x 48”
• VULS522-4 – 1” x 4-1/4” x 4’
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
REBAR CAPS
58
REBAR CAP – AASS23709
REBAR CAP – AASSA-5
• MODEL PC-110
BARGARD
• MODEL A-5 BARGARD
• Fits #3-#8, 3/8” to 1-1/4”
• Fits rebars 3/8” to
3/4” diameter
• Lime green for
increased visibility
• Also fits inside
1” ID pipe
• Meets the test standards set forth
by CAL-OSHA
• Bar Gard caps are bit
designed or intended to
provide impact or impalement protections
REBAR CAPS
REBAR SAFETY CAPS – PARS1202-3500
• #3-#9
• Not intended for
impalement protection
• Brilliant orange color
for higher visibility
Call us at: 8 00-6 6 9-778 8
CONCRETE & MASONRY
LIGHT EQUIPMENT
REBAR CUTTER
• 18.3” x 5.9” x 9.4”
• Cutting capacity up to
1” diameter
• Cutting capacity up to
1” diameter
• Each cutter is powered
by a miniature
hydraulic pump and 115 volt electric motor
• Each cutter is powered
by a miniature
hydraulic pump and 115 volt electric motor
• Slices through rebar safely and efficiently with
the squeeze of a trigger
• Slices through rebar safely and efficiently with
the squeeze of a trigger
• Portable, easily carried around to job sites
• Portable, easily carried around to job sites
CONCRETE & MASONRY
REBAR CUTTER – MULEHBC25
• 15.3” x 4.4” x 8.8”
MATERIAL HANDLING
REBAR CUTTER – MULEHBC19
SEALANTS & PATCHES
RAPID SETTING FLOWABLE REPAIR MORTAR
– DAYSHD50-50LB
• 1 gal
• 5 gal
• 50 lb
• Non-reemulsifiable acrylic
latex emulsion for use as a
bonding agent
• Non-reemulsifiable
acrylic latex emulsion for
use as a bonding agent
• Fiber reinforced
• For grouts, patches, mortars
and masonry coatings
• For grouts, patches,
mortars and masonry
coatings
• Designed for repair of concrete highways, bridge decks,
parking structures industrial
and warehouse floors and
loading docks, etc.
• Can be used inside or outside,
used to bond new to new or
new to old concrete
• Can be used inside or
outside, used to bond new to new or new to
old concrete
• Latex modified heavy-duty
concrete patch
SURE-GRIP HIGH PERFORMANCE GROUT –
DAYSSUREGRIP-N11
• 50 lb
• 5 gal
• 50 lb
• General purpose patching
material containing portland cement, special
hardeners and set accelerators
• Acrylic copolymer in a
water based solution containing 15% solids
• Ready to use, non shrink,
non corrosive, non metallic
grout
• Used to seal, dustproof
and enhance the beauty of
concrete
• Ideal for interior or exterior
grouting of architectural
components, structural column base plates, anchoring bolts and
crane rails
• Initial set time of 3 minutes and final set of 8 minutes
• Repair concrete pipe, precast concrete,
large floor cracks, concrete steps, walks,
driveways, etc.
• Has no odor and is non-flammable, therefore,
can be used indoors
• Used in power plants, steel mills, paper mills
and water treatment plants
WHITE PIGMENTED CURE –
DAYSJ-10-W-5GAL
• 50 lb
• 5 gal
• Premixed construction
grout formulated with quality
raw materials
• Resin base
curing compound
• Used for architectural precast
components, machinery bases, anchoring
bolts and column base plates
• White pigments and
other additives
• Formulated to retain a minimum of 95% moisture to
insure full hydration of the cement
SAFETY SUPPLIES
• Non-shrink, non-ferrous,
non-corrosive and high flow
GENERAL SUPPLIES
SURE-GRIP UTILITY GROUT –
DAYSUTILITYGROUT
LANDSCAPING
SAFE SEAL – DAYSJ24-5GAL
HAND TOOLS
RE-CRETE 5 MINUTE PATCH –
DAYSRE-CRETE5
BITS, BLADES
& ABRASIVES
DAY-CHEM AD BOND – DAYSJ40-5GAL
POWER TOOLS
DAY-CHEM AD BOND – DAYSJ40-1GAL
WORKWEAR
59
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CONCRETE & MASONRY
CEMENT COMPOUND
CEMENT PATCH – HRTS10005
• 5 lb box
• 10 lb pail
• 50 lb pail
• Fast setting, hydraulic
type cement compound
• More than twice the
strength of fully cured
conventional concrete
• Used for anchoring
and patching
and patching
and patching
BLANKETS
• ACMS6X25 – 6’ x 25’
• ACMS12X25 – 12’ x 25’
• Closed cell
• Reflective blanket
with a second layer
of aluminum
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE BLANKET
60
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
HD XRP 18V CORDLESS 4 KIT –
DEWEDC4KITA
HD XRP 18V CORDLESS 6 TOOL KIT –
DEWEDC6KTGA
• DC988 18V XRP 1/2”
hammerdrill/drill/driver
• DC988 18V XRP 1/2”
• DC390 18V XRP
circular saw
• DC390 18V XRP
circular saw
• DC988 18V XRP
1/2” hammerdrill/
drill/driver
• DC385 XRP 18V reciprocating saw
• DC390 18V XRP
circular saw
• DW933 18V variable speed jig saw
• DW919 18V flexible floodlight
MATERIAL HANDLING
HD XRP 18V 5 TOOL KIT – DEWEDC5KITA
LIGHT EQUIPMENT
POWER TOOLS COMBO KITS
• DW056 18V impact driver
• DC410 18V cut-off tool
HD XRP 18V CORDLESS HAMMERDRILL/CIRCULAR SAW KIT COMBO – DEWEDC988SA
CONCRETE & MASONRY
• DC988 18V XRP 1/2”
POWER TOOLS
• DC390 18V XRP
circular saw
HD XRP 1/2” 18V CORDLESS DRILL/DRIVER
KIT – DEWEDC987KA
• DeWALT built high
torque motor delivers
450 in-lbs of max
torque
500 in-lbs of max
torque
• XRP extended run
time batteries
time batteries
• Patented 3-speed
transmission
transmission
• 1/2” metal ratcheting chuck
CORDLESS DRILLS
18V 1/2” DRIVER DRILL – METE0622-24
• High speed - 1,400 rpm
• All metal ratcheting
chuck with carbide jaws
for the highest grip
torque on bits
• High torque-390 in-lbs
• Clip-Lok system
• 1/2” single sleeve ratcheting chuck
• Exclusive reversible battery pack
• Up to 50% more runtime than competitive
products
• 20 clutch positions
• Milwaukee’s exclusive reversible battery
SAFETY SUPPLIES
• Cushioned, anti-slip
soft-grip for increased comfort
• Milwaukee built in
motor provides up to
495 in-lbs of torque
GENERAL SUPPLIES
14.4V 1/2” DRIVER/DRILL – METE0612-22
LANDSCAPING
• Superior ergonomics
HAND TOOLS
HD XRP 1/2” 14.4V CORDLESS DRILL/DRIVER
KIT – DEWEDC983KA
BITS, BLADES
& ABRASIVES
CORDLESS DRILLS
WORKWEAR
61
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
CORDLESS
HAMMERDRILLS
HC XRP 1/2” 14.4V CORDLESS HAMMERDRILL/DRILL/DRIVER KIT – DEWEDC984KA
HD XRP 1/2” 14.4V CORDLESS HAMMERDRILL/DRILL/DRIVER KIT – DEWEDC985KA
HD XRP 1/2” 18V CORDLESS HAMMERDRILL/DRILL/DRIVER KIT – DEWEDC988KA
450 in-lbs of max
torque
torque motor delivers 450 in-lbs of
max torque
500 in-lbs of max
torque
• XRP extended run time
batteries
time batteries
• Patented 3-speed transmission
• Patented 3-speed transmission
transmission
• Hammerdrill mode: 30,600 bpm
HD XRP 1/2” 18V CORDLESS HAMMERDRILL/DRILL/DRIVER KIT – DEWEDC989KA
HD 24V 1/2” CORDLESS
HAMMERDRILL/DRILL KIT – DEWEDW006K-2
500 in-lbs of max
torque
• Combines drill and
hammerdrill into
one tool
• 550 in-lbs of
maximum torque
time batteries
• All metal, ratcheting
action, keyless chuck
with carbide tipped jaws and spindle lock
• 360 degree side handle
• Fan-cooled battery and charger
CORDLESS
HAMMERDRILLS
18V 1/2” HAMMERDRILL – METE0624-24
• All metal ratcheting
chuck with carbide jaws
for the highest grip
torque on bits
• Milwaukee built in
motor provides up to
• Up to 50% more runtime than competitive
products
• Milwaukee’s exclusive reversible battery
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
62
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
3/8” VSR DRILL – DEWEDW223G
HD 3/8” VSR DRILL – DEWED21002
• 3.2 amp, 1200 rpm
• 7 amp, 0-1200 rpm
• 7.0 amp, 0-2500 rpm
• 100% ball bearing
construction
• Helical cut steel, heat
treated gears
• All ball bearing
construction
• Compact, right angle design
• Metal gear housing
• Contoured, textured handle
• Paddle switch
• Two finger rubber trigger
• Shielded chuck
• DIN nose for side handle or rig mount
• Built in two way level for
drilling accuracy
• Double gear reduction
• 3 wire grounded cord
• Belt clip conveniently holds tool and frees
user’s hands for other work
1/2” END HANDLE DRILL – DEWEDW140
1/2” RIGHT ANGLE DRILL KIT – DEWEDW120K
• 7.0 amp, 0-2500 rpm
• 7 amp, 600 rpm
• All ball bearing
construction
construction
• 7 amp,
400/600/900 rpm
• Contoured, textured handle
• Die cast metal
gear housing
• Three speed ranges,
match appropriate
speed to the application
• 3 position auxiliary side handle
• Die cast metal gear housing
• Triple gear reduction
• 5 position side handle
• D-handle design is ideal for drilling
applications
• 360 degree right angle attachment
1/2” SPADE HANDLE DRILL – DEWEDW130
• 500 watt, 450 rpm
• 7 amp, 450 rpm
• 7 amp, 1000 rpm
• 5/8” spindle for
increased durability
• 2 position rear spade
handle & 3 position
side handle
• Top handle and back
• Top handle and back
• Trigger switch and
toggle reversing
• Trigger switch and
toggle reversing
• AC/DC, forward/reverse rocker switch
• AC/DC, reversing switch
1/2” STUD & JOIST DRILL KIT –
DEWEDW124K
1/2” VSR DRILL – DEWEDW235G
1/2” VSR DRILL – DEWEDW236
• 8 amp, 300-1200 rpm
• 7.8 amp, 0-850 rpm
• 7.8 amp, 0-850 rpm
construction
• Helical cut steel,
heat treated gears
treated gears
• Mechanical slip clutch in low gear
• Adjustable front handle and 2 position
side handle
• Two finger
rubber trigger
• Rubber grip and two
finger trigger
• Mechanically controlled 2 speed
• Built in two way level for
drilling accuracy
• Glass filled nylon housing is durable,
impact resistant and provides lower
maintenance costs
BITS, BLADES
& ABRASIVES
• Belt clip conveniently holds tool and frees
user’s hands for other work
• Keyless chuck
• 10 amp, 375 rpm
treated gears
• AC/DC switch
• No 3 taper chuck mount
• Two finger
rubber trigger
SAFETY SUPPLIES
• 7.8 amp, 0-600 rpm
GENERAL SUPPLIES
3/4” DRILL/POWER UNIT – DEWEDW138
LANDSCAPING
1/2” VSR DRILL – DEWEDW245
HAND TOOLS
• All metal single sleeve keyless chuck with
spindle lock
• Rotating brush ring
• Top handle and
back handle
WORKWEAR
POWER TOOLS
HD 3/8” VSR DRILL – DEWED21009
CONCRETE & MASONRY
• Glass filled nylon housing is durable, impact
resistant and provides lower maintenance cost
MATERIAL HANDLING
3/8” RIGHT ANGLE DRILL – DEWEDW160
LIGHT EQUIPMENT
DRILLS
63
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
DRILLS
3/8” CLOSE QUARTER DRILL – METE0375-6
1/2” HOLE HAWG DRILL – METE1676-6
1/2” MAGNUM DRILL – METE0234-6
• 3.5 amp motor,
0-1300 rpm, trigger speed
control with reversing
• Handles up to 4-5/8”
self-feed bit
• 5.5 amp motor, 0-850
rpm, trigger speed
control with reverse
• Two speed: 300 and 1200
rpm, reversing
• Heavy-duty industrial chuck
• 55 degree angled chuck for
easy access to tight places
• Powerful 7.5 amp motor
• Heavy-duty
industrial chuck
• Ideal for working in tight
space where a full size drill doesn’t fit
• Powerful, yet compact for
large hole drilling between
joists and studs
• 8’3” wire Quik-Lok cord with easy detachment
for storage and service
1/2” RIGHT ANGLE DRILL – METE3107-6
1/2” SUPER HAWG – METE1680-21
3/4” LARGE DRILL – METE1854-1
• D-handle
• Clutch in low speed
• 3/4” capacity in steel
• 1/2” capacity in steel, handles up to a 4-5/8”
self-feed bit
• High operating
speeds for maximum productivity
• 350 rpm, reversing
• Trigger speed control in two ranges:
0-335/0-750 rpm,
• 90 degree left right, Roto-Lok handle for maximum operating comfort
• Powerful 7 amp motor
• Easy turn gear shift knob
• Head and handle swivel 360 degrees
• Comfort grip switch handle and gear case with
front T-bar handle
• Exclusive brush cartridge system changes
brushes in less than one minute
• Powerful 10 amp motor
• #3 Jacobs taper spindle
HAMMERS
HD 1” SINGLE MODE PISTOL GRIP SDS HAMMER – DEWED25101K
HD 1” THREE MODE D-HANDLE SDS HAMMER
– DEWED25203K
• 2.3 ft-lbs. of impact
• 2.3 ft-lbs. of impact
• 7.5 amp, 0-800 rpm
• 7.5 amp, 0-800 rpm
• Reverse feature
assists in the
removal of fasteners
• Reverse feature
assists in the
removal of fasteners
• Variable speed allows for precise hole placement on work surface
• Variable speed allows for precise hole placement on work surface
• Factory set clutch reduces sudden, high
torque reactions if bit jams
• Factory set clutch reduces sudden, high
torque reactions if bit jams
• 360 degree side handle adjusts easily
• 360 degree side handle adjusts easily
• Chipping feature
ROTARY HAMMERS
1-1/8” SDS ROTARY HAMMER KIT –
DEWEDW570K
7/8” 18V CORDLESS SDS ROTARY HAMMER
KIT – DEWEDW999K-2
HD 1” L-SHAPE SDS ROTARY HAMMER –
D25303K
• 8.3 amp,
3.34 ft-lbs impact
• Variable speed
reversing switch
• Hard hitting
hammer mechanism
• Factory set clutch
• L-shape design offers
superior balance and
control
• Electro-pneumatic
hammer mechanism
• 2.3 ft-lbs of
impact energy
• 7.5 amp, 0-800 rpm
• Accepts SDS bits from
5/32” to 1-1/8”
• Chipping (hammer-only)
• Rotation only mode (using SDS to round
shank adapter)
• At only 11-1/2” this hammer is the most compact in the market allowing users to get into
tight spaces
WORKWEAR
• Dust extraction connection
64
• Chipping (Hammer only) mode allows user to
perform light chipping applications
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
HD 1” L-SHAPE SDS ROTARY HAMMER W/
QUICK CHANGE REMOVABLE CHUCK & 3-JAW
KEYLESS CHUCK – DEWED25304K
• Electronic variable
speed allows the user
to control the speed of
drilling and chipping
• At only 11-1/2” this hammer is the most compact in the market allowing users to get into
tight spaces
• 8 ft-lbs of impact energy
• 7.3 ft-lbs of impact energy
• Spline toolholder is compatible with all spline
drive bits
• SDS max toolholder is compatible with most
bits the user has
• Dust extraction connection
• Rubber grip helps reduce the level of vibration
• Chipping (hammer only) mode allows user to
perform light chipping applications
• Rear handle mount
• Bit lock allows user to unwind jammed bits
• Quick change removable chuck allows easy
replacement of SDS or 3-jaw keyless chuck
• Factory clutch helps reduce the tools reaction
to embedded steel when bit “locks-up”
to embedded steel when bits “lock-up”
• “Rotation only mode” allows tool to be used
for wood and metal drilling
HD 1-9/16” SPLINE ROTARY HAMMER KIT –
DEWED25550K
DEWED25551K
HD 24V SDS ROTARY HAMMER WITH CHIPPING FUNCTION KIT – DEWEDW005K-2
• 11 amp,
1330-2660 bpm
• 11 amp,
1330-2660 bpm
• Variable speed
reversing switch
• Factory set clutch
• Spline toolholder is compatible with most bits
the user has
• 2.3 ft-lbs of
impact energy
• 7.5 amp, 0-800 rpm
• Electro-pneumatic
hammer mechanism
HAND TOOLS
• Bit lock allows user to unwind jammed bits
LANDSCAPING
• Spline toolholder is compatible with all spline
drive bits
ROTARY HAMMERS
1-1/2” BASIC SPLINE DRIVE ROTARY HAMMER – METE5318-21
1-1/8” SDS DRIVE L-SHAPE ROTARY HAMMER
– METE5359-21
• 1” solid bit capacity in
concrete, 3-1/2” thin
wall core bit capacity,
SDS plus drive
• Single motion bit
insertion
• Grounded, 3-wire cord
• Powerful 6 amp
• Two modes of operation: hammer with rotation or rotation only
• 385 rpm, 3,400 bpm
• Powerful 11.0 amp motor with electronic feedback control circuit
• Extra large steel case holds 23 inch long bits
• Variable speed: 0-980 rpm, 0-4,200 bpm
• Powerful 7.4 amp motor provides power for a
hard hitting 2.5 ft-lbs of energy per blow
SAFETY SUPPLIES
• Trigger speed control:
0-900 rpm, 0-4500 bpm, reversing
• 1-1/8” solid bit capacity,
3-1/2” thin wall core bit
capacity in concrete or
4” capacity in masonry
block
GENERAL SUPPLIES
1” CAPACITY SDS DRIVE L-SHAPE ROTARY
HAMMER – METE5362-6
• 1-1/2” solid bit
capacity, 6” thin wall
core bit capacity
BITS, BLADES
& ABRASIVES
• 11 amp,
1330-2660 bpm
POWER TOOLS
• 11.5 amp,
1330-2660 bpm
• L-shape design offers
superior balance and
control
CONCRETE & MASONRY
HD 1-9/16” SDS MAX ROTARY HAMMER KIT –
DEWED25500K
MATERIAL HANDLING
DEWED25650K
LIGHT EQUIPMENT
ROTARY HAMMERS
• Rotation with hammering
• Hammer only
WORKWEAR
• Rotation only
65
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
ROTARY HAMMERS
3/4” CAPACITY SDS DRIVE PISTOL GRIP
ROTARY HAMMER – METE5383-21
7/8” CAPACITY SDS DRIVE D-HANDLE
ROTARY HANDLE – METE5368-21
• 3/4” solid bit capacity,
1-3/4” core bit capacity
• 7/8” solid bit capacity, 2” core bit capacity
• Variable speed: 0-1100
rpm, 0-5000 bpm,
reversing
• Variable speed:
0-1270 rpm,
0-5400 bpm, reversing
• Rotation with hammering and rotation only
• Speed control switch allows operator controlled starts for less bit walk resulting in
more accurate hole positioning
• Powerful 7.2 amp
motor provides power for a hard hitting 1.8 ftlbs of energy per blow
• Rotating with hammering and rotation only
• Speed control switch allows operator controlled starts for less bit walk resulting in
more accurate hole positioning
HAMMERDRILLS
1/2” VSR HAMMERDRILL KIT – DEWEDW505K
1/2” VSR HAMMERDRILL KIT – DEWEDW515K
• 7.8 amp,
0-1100/0-2700 rpm
• 8.2 amp,
0-1050/0-2400 rpm
• Dual mode:
hammerdrill/drill
• Dual mode:
hammerdrill/drill
• Lightweight design
• Two finger trigger
• Rubber grip and two
finger trigger
• 360 degree side handle with depth rod
• 360 degree side handle with depth rod
• Variable speed
• Lightweight design
HAND TOOLS
• Variable speed
HAMMERDRILLS
1/2” MAGNUM DUAL TORQUE HAMMER
DRILL – METE5370-6
LANDSCAPING
• 1/2” capacity, 5.5 amp motor
• Trigger speed control in
two ranges: 0-1000
rpm, 0-20,000 bpm,
0-2500 rpm, 0-50,000
bpm, reversing
• 3 wire Quik-Lok detachable cord
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Removable brush cartridge-change brushes in
less than one minute
66
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
4-1/2” ANGLE GRINDER – DEWEDW402
• 5.0 amp AC, 10,000 rpm
• 7.5 amp AC/DC, 10,000 rpm
• 9 amp, 10,000 rpm
• 2 position removable
side handle
• Metal gear case
dissipates heat
• Keyless adjustable
guard
• Spindle lock
• Convenient paddle
switch with lock-on
button
• Side positioned spindle lock
• 5/8”-11” spindle thread
• 3 position removable side handle
• Matched wheel flanges
• Automatic turn off brushes
• Dust sealed switch
• Paddle switch with safety lock-off
• Keyless adjustable
guard
• High power 4 hp,
8000 rpm motor
6000 rpm motor
• Rubber grip side handle
• Epoxy coated field
and armature
and armature
• Keyless adjustable guard
• Metal gear case dissipates heat
• Low profile gearcase allows for work in
tight areas
tight areas
• 5 position side handle provides improved
ergonomics
ergonomics
• 9 amp AC/DC, 11,000 rpm
• Dust sealed sliding switch
HD 9” LARGE ANGLE GRINDER –
DEWED28493N
BITS, BLADES
& ABRASIVES
DEWED28494S
POWER TOOLS
DEWED28474W
CONCRETE & MASONRY
• Spindle lock
• Low profile, air cooled gearcase
MATERIAL HANDLING
LIGHT EQUIPMENT
ANGLE GRINDERS
5000 rpm motor
HAND TOOLS
and armature
tight areas
LANDSCAPING
ergonomics
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
67
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
ANGLE GRINDERS
ANGLE GRINDER – MTBE14-150ERGO
ANGLE GRINDER – MTBEW23-180
ANGLE GRINDER – MTBEWE14-125
• 6”, 12 amp, 9700 rpm
• 7”, 15 amp, 8500 rpm
• Die cast aluminum
gear housing
gear housing
• 4-1/2”/5”, 12 amp,
7000-10,500 rpm
• Rotatable handle
without tools
• Starting current
limitation
• Spindle stop
• Spindle stop
• Spindle stop
• “Quick” tool change
• Adjustment of protective hood without tools
• High efficiency and increased torque through
optimum heat dissipation
• Vario Tacho Constamatic (VTC) full-wave
electronics
• Vario Tacho Constamatic (VTC) full-wave
electronics
• Safety switch: lock against unintentional start
• Thumbwheel for preselection of speed
• Thumbwheel for preselection of speed
• Auto stop carbon brushes
• Electronic soft start, overload protection
• Electronic soft start, overload protection
ANGLE GRINDER – MTBEWE14-150
ANGLE GRINDER – MTBEWPS7-115
ANGLE GRINDER – MTBEWPS7-125
• 6”, 12 amp, 9000 rpm
• 4-1/2”, 7 amp,
10,000 rpm
• 5”, 7 amp, 9000 rpm
• Die cast aluminum gear housing
• Metabo S-automatic
torque limiting clutch
gear housing
• Spindle stop
• Metabo S-automatic torque limiting clutch
• Spindle stop
• Ergonomic handle design with integrated
switch
• Winding grid protection
• Ergonomic handle design with integrated
switch
• Deadman’s switch
• Winding grid protection
gear housing
• Metabo S-automatic torque limiting clutch
gear housing
• Metabo S-automatic
torque limiting clutch
• Deadman’s switch
ANGLE GRINDERS
LANDSCAPING
• 11 amp,
9000 rpm motor
GENERAL SUPPLIES
6” RIGHT ANGLE GRINDER – METE6160-20
• Three position side handle
• Solid state electronics
• Guards can be rotated
in five positions
without tools
SANDERS
SAFETY SUPPLIES
1/2 SHEET PALM GRIP SANDER –
DEWEDW411
• 2.0 amp, 13,500 opm
• Dual plane, counter
balanced design
• Dust sealed switch
WORKWEAR
• Sealed 100% ball bearing construction
68
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
LIGHT EQUIPMENT
SANDERS
7”/9” SANDER – METE6080-20
MATERIAL HANDLING
• Powerful 4.0 max hp,
15 amp motor
• 7” or 9” capacity, 6000
rpm, 120 volts AC-DC
• Double insulated with 2 wire fixed cord
• Angled handles and two finger trigger
for comfort
CONCRETE & MASONRY
• Sander may be converted to grinder by using
the proper wheel guard
SANDERS/GRINDERS
4-1/2” SUPER MAGNUM SANDER/GRINDER –
METE6153-20
• 8.5 amp, 10,000 rpm
AC-DC
• Powerful 12 amp, 2.1
max hp motor, 11,000
rpm, AC-DC
• Spiral bevel gearing
for performance and
durability
• Tool-free adjustable wheel guard
• All ball and roller bearing construction
BITS, BLADES
& ABRASIVES
• All ball and roller bearing construction
• Spiral bevel gearing
for performance and
durability
POWER TOOLS
4-1/2” MAGNUM SANDER/GRINDER –
METE6148-6
• Tool-free adjustable wheel guard
CUT-OFF TOOLS
6” CUT-OFF TOOL/ANGLE GRINDER –
DEWEDW827
HD 4-1/2” 18V CORDLESS CUT-OFF TOOL –
DEWEDC410KA
• 9 amp, AC/DC,
9000 rpm
• 12 amp, AC/DC,
9000 rpm
• Paddle switch with
safety lock-off
• 6500 rpm provides high
power for cutting and
grinding applications
• Anti-lockup flanges
• Dust sealed sliding switch
• Side positioned spindle lock button
• Metal gear case dissipates heat
• Low profile, air cooled gearcase
• Convenient trigger
switch with lock off button for easier gripping
• 3 position side handle offers greater comfort
and control
• Spindle lock allows users to change their
wheels quickly and easily
LANDSCAPING
HAND TOOLS
6” CUT-OFF TOOL W/PADDLE SWITCH –
DEWEDW828
• Metal gear case dissipates heat for longer
bearing, gear and motor life
DIE GRINDERS
2” DIE GRINDER – DEWEDW888
• 3.0 amp, 25,000 rpm
• 5.0 amp, 19,000 rpm
• AC/DC capacity
• AC/DC capacity
• Convenient paddle switch with lock-on button
• External brush caps
• Precision 1/4” collett with 1/8” reducing sleeve
• Precision 1/4” collett with 1/8” reducing sleeve
SAFETY SUPPLIES
1-1/2” DIE GRINDER – DEWEDW887
GENERAL SUPPLIES
WORKWEAR
69
LIGHT EQUIPMENT
POWER TOOLS
DIE GRINDERS
DIE GRINDER – METE5194
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 4.5 amp, 21,000 rpm
• For mounted wheels and points up to
1-5/8”, reinforced wheels up to 2”
• 1/4” collet standard equipment, 1/8”
collet available
• All ball and roller bearings
BAND SAWS
HD DEEP CUT VARIABLE SPEED BAND SAW
KIT – DEWED28770K
• Rubber bumpers
protect guards
• Lightweight, well
balanced design
• Innovative sight light
• Powerful 6 amp, 82-280 fpm
• 4-3/4” deep cut capacity for round or
rectangular stock
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Durable and adjustable material guide
• Large front handle
• Ergonomic soft grip back handle
• Speed control knob
BAND SAWS
DEEP CUT PORTABLE BAND SAW –
METE6232-6
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Cuts up to 4-3/4” x 4-3/4”
rectangular stock and
4-3/4” round stock
70
• 6 amp, AC only
• Trigger speed control:
0-350 sfpm
• Uses standard 44-7/8” x 1/2” x .020” band
saw blades
CHOP SAWS
14” CHOP SAW – DEWEDW871
14” MULTI CUTTER SAW – DEWEDW872
• 15 amp, 5.3 hp
• Multi cutter offers versatility by
cutting a wide variety of materials
• Patented tool free, 45
degree adjustable fence
“D” handle
• Cuts 4 times faster than chop
saws and 8 times faster than
portable band saws
• Quick-lock vise
• 15 amp, 4 hp
• Durable metal top handle
• 45 degree adjustable fence
• Spindle lock
• Quick-lock vise
• Large cutting capacity
(5” round/4-1/2” x 6-1/2” rectangle
• Extra wide steel base
• Durable metal top handle
• Adjustable chip deflector
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
LIGHT EQUIPMENT
CHOP SAWS
14” DRY CUT MACHINE – METE6190-20
MATERIAL HANDLING
• Powerful 4.8 max hp
motor, 15 amp motor
(1500 rpm)
• Tool-free fence and
vise system
• Heavy-duty cast base
• Horizontal D-handle for optimum comfort
CONCRETE & MASONRY
• Largest cutting capacity in class
• Cuts fast with virtually no sparks or burrs
CIRCULAR SAWS
6-3/4” 18V CORDLESS METAL CUTTING CIRCULAR SAW KIT – DEWEDW934K-2
7-1/4” CIRCULAR SAW – DEWEDW364
7-1/4” LIGHTWEIGHT CIRCULAR SAW KIT –
DEWEDW368K
• All metal upper and
lower guards
• Heavy gauge, high
strength aluminum alloy base
• 56 degree bevel
capacity, stops at 45
degree and 22.5 degree
• Multi coated sight-line window
• 50 degree beveling capacity
• Magnesium shoe
• Stainless steel shoe stays rust free
• Electric brake stops blade after use
• Clear line of sight aids in blade visibility
• 15 amp, 2075
MWO motor
• 15 amp, 2200
MWO motor
• Lower guard design
HD 6-1/2” 24V CORDLESS CIRCULAR SAW KIT
– DEWEDW007K-2
HD XRP 18V CORDLESS CIRCULAR SAW KIT –
DEWEDC390K
• 9.8 lb tool weight
• Weighs only 9.8 lbs
• Innovative high
strength base
• Electric brake
• 3700 rpm, for fast rip
cuts and cross cuts
• Durable and lightweight
magnesium base
• 15 amp, 2200
MWO motor
• 6-1/2” blade
• Clear line of sight aids in blade visibility
• Electric brake
• High strength magnesium shoe and
upper guard
• 0-50 degree bevel capacity
• Fan cooled motor with replaceable brushes
LANDSCAPING
• 56 degree bevel capacity, stops at 45 degrees
and 22.5 degrees
• 6-1/2” carbide tipped
blade for 2x cutting
capacity at 90 and
45 degrees
HAND TOOLS
7-1/4” LIGHTWEIGHT CIRCULAR SAW KIT –
DEWEDW369CSK
BITS, BLADES
& ABRASIVES
• Rear pivot depth of
cut adjustment
POWER TOOLS
• 9.5 lb lightweight tool
• 6-3/4” 40 tooth carbide
tipped blade cuts up to
2” conduit and pipe in
one mass
• XRP extended run-time battery provides long
run time and battery life
• Lightweight 13.0 lbs
• 15 amp high
torque motor
• Integrated saw hook to hang tool
• High strength cast aluminum base
SAFETY SUPPLIES
• 50 degree bevel capacity
GENERAL SUPPLIES
7-1/4” HIGH TORQUE FRAMING SAW –
DEWEDW378G
WORKWEAR
71
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
CIRCULAR SAWS
18 VOLT 6-1/2” METAL CUTTING SAW KIT –
METE6320-22
8” METAL CUTTING SAW KIT – METE6370-21
• Cuts all types of metals
such as uni-strut,
galvanized pipe and
metal studs
• Dry cut technology
provides faster,
cleaner, more affordable
metal cutting
• 3200 rpm and 2-1/8”
maximum depth of cut
• Durable blade shield with
integral chiptank
deflects/collects hot chips and sparks
• Clear guard provides an excellent line of sight
for cutting
• Electric brake for quick stops
• Plunge level for fast, effective plunge cuts
• Exclusive quick release shiel latch for fast
waste disposal and blade changes
• 2-9/16” cut depth for one pass cuts through
most common materials
• Powerful 13 amp, 3700 rpm motor
• Premium cermet-tipped blades cut faster,
cleaner and longer than other carbide tipped
or friction blades
CIRCULAR SAWS
7-1/4” MAGNESIUM WORM DRIVE SKILSAW –
SKLEHD77M
7-1/4” WORM DRIVE SKILSAW – SKLE77
• 13 amp
• 13 amp
• Precision machined
worm drive gears
worm drive gears
• Light magnesium housing
• Aluminum foot
housing
• Anti-snag lower guard
• Aluminum foot
• Oil indicator level and relief bellows
• Anti-snag lower guard
• Push button blade lock
• Oil indicator level and relief bellows
• 22 amp switch and heavy gauge cord
• Push button blade lock
JIGSAWS
COMPACT JIGSAW KIT – DEWEDW317K
TOP HANDLE JIGSAW KIT – DEWEDW331K
• 5.5 amp, 0-3100 spm
• 5.8 amp, 500-3100 spm
• Keyless blade clamp
allows quick blade
change
• Keyless blade
change system
• 4 position orbital action
• Counter balance mechanism and rubber grip
• All metal gear case
• 0-45 degree in both directions
• Shoe bevels 0 to 45 degrees for beveled cuts
• 4 position orbital action
• Variable speed trigger
• Adjustable dust blower
• 100% ball bearing construction
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• 22 amp switch and heavy gauge cord
72
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
LIGHT EQUIPMENT
MITER SAWS
12” DOUBLE BEVEL SLIDING COMPOUND
MITER SAW – DEWEDW708
• 15 amp, 4000 rpm
• 15 amp, 4000 rpm
• Stainless steel
detent plate with 9
positive stops
• Stainless steel detent plate
with 11 positive stops
• Extra tall sliding
fence allows 5-1/4”
crown molding
MATERIAL HANDLING
12” COMPOUND MITER SAW – DEWEDW705S
• Cross out capacity of 12”
at 90 degrees
• Miters 50 degrees to the
left and 60 degrees to the right
• Bevels 45 degrees left and right
• 0-48 degree miter (left and right)
• Dual vertical rails
CONCRETE & MASONRY
• Bevels 0-45 degrees to the left
• Improved dust collection efficiency
RECIPROCATING SAWS
• Keyless blade change
• 7/8” stroke length
and 0-2700 spm
• 1” stroke length
and 2900 spm for
fast cutting
• Electric brake reduces coast time
• Keyless blade clamp allows quick blade change
• Compact and lightweight; 6.0 lbs
• Electric brake minimizes risk of blade breakage when exiting plunge cuts
• Pivoting shoe with open top
• Blade reverses for upside down cutting
• Variable speed with trigger lock
RECIPROCATING SAW KIT – DEWEDW304PK
• 10 amp, 0-2800 spm
• 4 position blade clamp
• Lever action keyless blade clamp
• 0-2800 spm and 1-1/8” stroke length
• Pivoting shoe with open top for maximum
visibility
BITS, BLADES
& ABRASIVES
HD 18V CORDLESS RECIPROCATING SAW KIT
– DEWEDC385K
POWER TOOLS
14.4V CORDLESS RECIPROCATING SAW KIT –
DEWEDW937K
• Blade can be reversed for flush and plunge
cutting
RECIPROCATING SAW KIT – DEWEDW309K
• 10.5 amp, 0-2800 spm
• 11.8 amp, 0-2900 spm
• Push button
adjustable shoe
• Push button
adjustable shoe
• 0-2800 spm and 1-1/4” stroke
• Counter balance mechanism
• 0-2900 spm and 1-1/4” stroke
LANDSCAPING
RECIPROCATING SAW KIT – DEWEDW307MK
HAND TOOLS
10 AMP SAWZALL RECIPROCATING SAW
W/CASE – METE6509-22
10 AMP SUPER SAWZALL – METE6536-21
18 VOLT SAWZALL RECIPROCATING SAW
W/CASE – METE6515-27
• 10 amp high performance super Sawzall
• Counter balance
• 18 volt, 2.4 amp-hr
Power Plus battery
• 0-2800 spm variable speed trigger
• Gear protection
system
• 1” stroke length for
aggressive cutting, 0-2000 spm
• Milwaukee electronic speed control
0-3200 spm
• Powerful 18 volt rare earth motor easily
handles all Sawzall applications
• Quik-Lok blade clamp for fast, easy blade
changes
• Double bearing wobble plate mechanism for
less vibration
SAFETY SUPPLIES
• 10 amp Milwaukee
built motor
GENERAL SUPPLIES
RECIPROCATING SAWS
• Cuts up to 72 2x4’s on a single charge
• Center pivot adjustable shoe
• Heavy-duty “S” jacket 8’ wire rubber cord
• Double insulated
WORKWEAR
• Rubber boot for superior gripping
• Uses standard 1/2” shank Sawzall blades
73
LIGHT EQUIPMENT
POWER TOOLS
DEMOLITION HAMMER
DEMOLITION HAMMER – BOSE11304
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 15 amp, 1400 bpm
• 115/120V AC/DC
• Service minder
brush system
• Grease packed
gearbox and
hammer mechanism
• Shock mounted handle absorbs vibration to
reduce fatigue
• 2-way tool retainer
DEMOLITION HAMMER
HD SDS MAX DEMOLITION HAMMER KIT –
DEWED25900K
• 14 amp,
1020-2040 bpm
BITS, BLADES
& ABRASIVES
• Active vibration control
reduces vibration
• Non air pumping beatpiece eliminates
masonry dust
• Spring loaded dust seals
• Variable impact control dial (19 settings)
• One step chisel rotation (12 positions)
• Large rear rubber handle
HAND TOOLS
• SDS max toolholder with rubber dampers
absorb energy
DUAL TEMPERATURE HEAT GUN –
METE8975-6
• Dual temperature 570
and 1000 degrees F,
11.6 amp motor
• Unique impact resistant
heating element
• Efficient soft air velocity increases surface
temperature much faster than conventional
hot air heat guns
• Three position rocker switch-off, high and low
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HEAT GUN
74
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
HD 1/2” 18V CORDLESS HIGH TORQUE
IMPACT WRENCH KIT – DEWEDW059K-2
• Compact size and
weight allows access
into tighter areas
• 300 ft-lbs of max torque
• Easy forward or
reverse, AC/DC
• Ball bearing
construction
• 1550 in-lbs of
max torque
• 434 ft-lbs of torque
• 0-2400 rpm,
0-3000 bpm
• 10 amp, 1600 rpm
• Textured anti-slip comfort grip
• Durable magnesium gear case
• Preferred rocker
switch design
• Comfort grip
• Durable magnesium
gear case
• Heavy-duty impacting mechanism
HD 12V CORDLESS IMPACT DRIVER KIT –
DEWEDW052K-2
HD 14.4V CORDLESS IMPACT DRIVER KIT –
DEWEDW054K-2
• Compact size and weight
allows access into tighter areas
• 1650 in-lbs of max torque
• 0-2400 rpm, 0-3000 bpm
• 0-2400 rpm, 0-3000 bpm
• 0-2400 rpm, 0-3000 bpm
BITS, BLADES
& ABRASIVES
IMPACT
14.4 VOLT 3/8” SQUARE DRIVE IMPACT
WRENCH KIT – METE9082-22
18 VOLT 1/2” DR IMPACT WRENCH KIT –
METE9079-22
• 300 ft-lbs of torque;
more torque saves time
• Powerful-delivers up to
• 240 ft-lbs of torque
• AC/DC rocker switch for
quick selection of forward
and reverse
• Lightweight - allows the user
to work longer with less fatigue
• Hard hitting - Produces up to 3500 ipm
• Reversible battery pack
makes getting into tight
spaces easy
• Variable speed switch for maximum user
control, 0-1400 rpm
• Pin detent system to securely retain sockets
and adapters
• 380 ft-lbs opf torque;
more torque saves time
• AC/DC rocker switch
for quick selection of
forward and reverse
• Lightweight (6.2 lbs) with balanced feel and
cushioned grip
• Pin detent system to securely retain sockets
and adapters
SAFETY SUPPLIES
• Powerful 7 amp motor, 1750 rpm and
2500 ipm (no load)
GENERAL SUPPLIES
3/4” IMPACT WRENCH – METE9075-20
LANDSCAPING
• Lightweight (6 lbs) with balanced feel and
cushioned grip
• Durable, equipped with a
heavy-duty, die cast aluminum
gear housing for extreme durability
• Great balance and soft
griphandle
HAND TOOLS
1/2” IMPACT WRENCH – METE9070-20
• Powerful 7 amp motor, 1800 rpm and
2600 ipm (no load)
POWER TOOLS
HD 1/2” 18V CORDLESS IMPACT WRENCH KIT
– DEWEDW057K-2
CONCRETE & MASONRY
• Externally replaceable brushes
• 1650 rpm/2600 bpm
MATERIAL HANDLING
HD 1/2” 14.4V CORDLESS IMPACT WRENCH
KIT – DEWEDW055K-2
3/4” IMPACT WRENCH – DEWEDW297
LIGHT EQUIPMENT
IMPACT
WORKWEAR
75
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
MAGNETIC DRILLS
ELECTROMAGNETIC DRILL PRESS –
METE4206-1
ELECTROMAGNETIC DRILL PRESS –
METE4270-20
• 3/4” capacity, 12.5 amp
motor, 350 rpm
• Powerful 9.0 amp 1.1 max hp motor
• Lightweight, only 26.5 lbs with comfortable
carrying handle
• Solid state electronic
switching
• Capacity to cut up to 1-1/2”
diameter holes through 2”
steel with annular cutters
• Feedback speed control
• Line lock-out prevents
tool from operating
should voltage be
restored to an interrupted line
• 1/2” diameter holes, 4-1/4”
deep with twist drill bits
• Strong two coil magnet
• Two positions for feed handle-relocate
without tools
• Simple two-button control panel-unobstructed
by feed handle
MAGNETIC DRILLS
MAGNETIC DRILL – HOGEHMD904
MAGNETIC DRILL CUTTERS – HOGS12114
MAGNETIC DRILL CUTTERS
• 120/23V
• 7/16” diameter
• HOGS12116 – 1/2” diameter
• New, more powerful motor so
you can drill large holes without stalling deep in the cut
• 1” depth of cut
• Use with pilot HOGP10531
• Made of hardened, high
speed tool steel and precision ground
• Drill point breakaway 820 lbs
• Weight 27.5 lbs
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• Drilling capacity 1-1/2” diameter with a 2”
depth of cut
• Cutters feature a 3/4” diameter shank
• Resharpenable
• Ergonomic handles for operator efficiency
• Made of hardened, high speed tool steel and
precision ground
• Resharpenable
MAGNETIC DRILL CUTTERS – HOGS12214
• 7/16” diameter
• Use with pilot
HOGP10532
• HOGS12134 – 1-1/16” diameter
speed tool steel and
precision ground
• Resharpenable
• Made of hardened, high speed tool steel and
precision ground
• HOGS12132 – 1” diameter
• Resharpenable
speed tool steel and precision ground
• Resharpenable
WORKWEAR
SAFETY SUPPLIES
76
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
MAGNETIC DRILL LUBRICANT
MAGNETIC DRILL LUBRICANT – HOGS11745-6
• HOGS11741 – 1 pint
• Lubricant stick
• HOGS11742 – 1 gal
MATERIAL HANDLING
• HOGP10527 – 1” thickness
• 1” thickness
• For use with cutter diameters 7/16”
• For use with cutter diameters 3/4” - 2”
MAGNETIC DRILL PILOTS – HOGP10532
MAGNETIC DRILL PILOTS
• Made of hardened,
high speed tool steel and
precision ground
• 2” thickness
• For use with cutter diameters 7/16”
POWER TOOLS
MAGNETIC DRILL PILOTS – HOGP10531
CONCRETE & MASONRY
MAGNETIC DRILL PILOTS
• Resharpenable
LIGHT EQUIPMENT
MAGNETIC DRILLS
• For use with cutter diameters 1/2”-11/16”
BITS, BLADES
& ABRASIVES
MOTORS/METER
BOX ASSEMBLY
METER BOX ASSEMBLY – METS48-51-0120
• Two speeds:
300 and 600 rpm
• Two speeds: 500 and
1000 rpm
• 20 amp, 120V
• 20 amp motor
• 15 amp motor
• Shear pin protection protects gears and motor
• Clutch protection protects gears and motors
• Built in water swivel
• Built in water swivel
• Stand not included
• Stand not included
• Ammeter and power
switch are located on front
for easy operator access
MOTORS & STAND
DIAMOND CORING SMALL BASE STAND METE4125
• Large base stand, Vac-u-rig kit
and meter box
• Small base for confined
drilling situations
• Cast aluminum base with four
leveling screws for fast accurate leveling adjustment
• Right or left hand operation
• Adjustable, tilting
2-1/2” x 43-1/2” steel column
• Small base stand only
GENERAL SUPPLIES
DIAMOND CORING RIG KIT – METE4136
LANDSCAPING
DIAMOND CORING MOTOR – METE4097-20
HAND TOOLS
DIAMOND CORING MOTOR - METE4079
• Capable of 45 degree
angle drilling
• Motor mount cradle, bubble level, jackscrew
SAFETY SUPPLIES
• Four speed wheel feed control
WORKWEAR
77
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
NAILERS
HD 15 GAUGE 1-1/4”-2-1/2” ANGLED FINISH
NAILER KIT – DEWED51275K
HD 16 GAUGE 1-1/4”-2-1/2” FINISH NAILER
KIT – DEWED51256K
HD 18 GAUGE 2” BRAD NAILER KIT –
DEWED51238K
• Magnesium housing
delivers a 3.85 lb unit
housing delivers a 3.9 lb
unit among the lightest
in the industry
• Tool free indexed
depth setting
• Swept back contact
trip with a low profile
no-mar pad
• Tool-free indexed
depth setting
• Overmolded no-mar pad
• Tool-free jam clearing
• Dual load magazine
• Swept back contact trip with low profile
no-mar pad
• Tool free 360 degree exhaust
• Tool free jam clearing
• Tool-free reversible belt hook
• Tool free 360 degree exhaust channels
• Trigger lock off allows trigger to be disabled
• Tool-free reversible belt hook
• Tool free indexed
depth setting
• Dual load magazine with 160 nail capacity
• Side low nail
indicator window
• Tool-free jam clearing
• Tool free 360 degree exhaust
when not in use
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
HD 20 DEGREE FULL ROUND HEAD FRAMING
NAILER – DEWED51845
HD 31 DEGREE CLIPPED HEAD FRAMING
NAILER – DEWED51823
HD XRP 1-1/4”-2-1/2” 18V 16 GAUGE ANGLED
FINISH NAILER KIT – DEWEDC618KA
• 7.6 lb magnesium
housing and
aluminum magazine
• 7.5 lb magnesium
housing and aluminum
magazine
• 12-3/4” height allows
for toe nailing in confined areas
• 12-3/4” height allows
for toe nailing in confined areas
• Works as fast as you do
with consistent nail penetration in both soft and
hard joints
• Tool-free adjustable depth
• Tool-free adjustable depth
• Sequential
operating mode
• Tool-free quick release jam clearing feature
• Tool-free quick release jam clearing feature
• Headlights provide increased visibility
• Dry fire lockout extends bumper life by
preventing tool from actuating when magazine
is empty
• Dry fire lockout extends bumper life by preventing tool from actuating when magazine
is empty
• Numbered depth dial
• Impact resistant exhaust deflector
• Impact resistant exhaust deflector
HD XRP 1-1/4”-2-1/2” 18V 16 GAUGE ANGLED
FINISH NAILER KIT – DEWEDC618KN
HD XRP 1-1/4”-2-1/2” 18V 16 GAUGE
STRAIGHT FINISH NAILER KIT –
DEWEDC616KA
HD XRP 1-1/4”-2-1/2” 18V 16 GAUGE
STRAIGHT FINISH NAILER KIT –
DEWEDC616KN
hard joints
hard joints
hard joints
• Sequential
operating mode
• Sequential
operating mode
• Sequential
operating mode
• Contact trip lock off
• More nails per charge and maximum number
of recharges without memory effect
• Integrated LED lights
WORKWEAR
SAFETY SUPPLIES
• 6 position dial
78
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
LIGHT EQUIPMENT
NIBBLER
16 GAUGE NIBBLER – DEWEDW896
• 3.0 amp, 2100 spm
MATERIAL HANDLING
• Round punch allows
360 degree pivot while
cutting
• Rotating head
• Easy to change punch and die
• No distortion of material
• Gear case constructed of strong
aluminum alloy
SCREWDRIVERS
• 6.2 amp, 0-2500 rpm
• 6.5 amp, 0-2,500 rpm
• High power,
multi-purpose kit
treated gears
• Depth sensitive “set and
forget” nosepiece
• Two finger rubber trigger
• High torque for deck
building, heavy gauge
steel stud framing
• Helical cut steel, heat treated steel gears
• Excellent ergonomics
• Depth sensitive “set and forget” nosepiece
BITS, BLADES
& ABRASIVES
VSR DRYWALL/FRAMING SCREWDRIVER –
DEWEDW276
POWER TOOLS
VSR ALL PURPOSE SCREWDRIVER KIT –
DEWEDW260K
CONCRETE & MASONRY
• Paddle switch
• Rubber grip and two finger, rubber trigger
• Excellent ergonomics
HAND TOOLS
SHEARS
18 GAUGE SWIVEL HEAD SHEAR –
DEWEDW890
• 5.0 amp, 0-2500 spm
• 5.0 amp, 0-2500 spm
• Head swivels
360 degrees
• Head swivels 360
degrees
• Cuts 7/32” strip
• Cuts 7/32” strip
• Cuts radius of 5-1/2” and larger
• Cuts radius of 5-1/2” and larger
LANDSCAPING
14 GAUGE SWIVEL HEAD SHEAR –
DEWEDW891
• Variable speed
18 GAUGE SHEAR – METE6850
• 5 amps, 4000 spm
• 4 amps, trigger speed
control: 0-2500 rpm
spindle speed
• Clear unobstructed
visibility
• Cuts close curves
either left or right
• 360 degree swivel head
• Blade design eliminates jamming
• Cuts round holes, square holes and
irregular shapes
• Cuts up to 15 fpm
SAFETY SUPPLIES
14 GAUGE SHEAR – METE6815
GENERAL SUPPLIES
SHEARS
WORKWEAR
79
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
WET/DRY VAC
2 GALLON CORDLESS OR CORDED WET/DRY
VAC – DEWEDC500
• Runs off of 12V-18V
DeWALT battery packs
or 120V ac
• Gore wet/dry filter traps
99.7% of drywall dust
• Wet/dry filter eliminates changeovers
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• Washable filter- tap or water rinse to clean
• Heavy-duty rubber hose
• Drain port on tank for easy emptying of liquids
• On-board hose, cord and accessory storage
FLASHLIGHTS
14.4V CORDLESS FLEXIBLE FLOODLIGHT –
DEWEDW918
14.4V CORDLESS PIVOTING HEAD FLASHLIGHT – DEWEDW906
18V CORDLESS FLEXIBLE FLOODLIGHT –
DEWEDW919
• Wide angle beam, brighter than
traditional flashlights
• Pivot head rotates
90 degrees
• Wide angle beam, brighter than
traditional flashlights
• Flexible neck allows for hands-free
operation
• Wide angle beam
maximizes light
• Flexible neck allows for handsfree operation
• Lockable head clip
• Extra bright Xenon bulb
• Lockable head clip
• Lightweight, compact design
• Battery sold separately
HAND TOOLS
18V CORDLESS PIVOTING HEAD FLASHLIGHT
– DEWEDW908
• Pivot head rotates
90 degrees
• Wide angle beam
maximizes light
GENERAL SUPPLIES
LANDSCAPING
• Lightweight, compact
design
BATTERY
24V XR+ PACK FAN COOLED EXTENDED RUN
TIME BATTERY – DEWSDW0242
• Fan-cooled technology
cools battery down
quickly
• Durable side rail
interface
WORKWEAR
SAFETY SUPPLIES
• High capacity XR+ Pack
80
Call us at: 8 00-6 6 9-778 8
POWER TOOLS
LIGHT EQUIPMENT
BATTERY PACKS
14.4V XRP BATTERY PACK – DEWEDC9091
MATERIAL HANDLING
• High capacity XRP battery has 40% more runtime than standard batteries
• Powers entire DeWALT
line of 14.4V tools
• 14.4V Nickel-Cadmium battery
CONCRETE & MASONRY
BATTERY PACKS
18 V BATTERY – METS48-11-2230
• 2.4 amp hour capacity
for longer run time
• 2.4 amp hour capacity
for longer run time
• No memory effect-full
battery capacity is
always available
• No memory effect-full
battery capacity is
always available
• Nickel-Cadmium battery
• Nickel-Cadmium battery
• For use with Milwaukee 14.4 volt cordless
tools
• For use with Milwaukee 18 volt cordless tools
POWER TOOLS
14.4V BATTERY – METS48-11-1024
7.2V-18V 1 HOUR CHARGER W/AUTOMATIC
TUNE-UP MODE – DEWEDW9116
7.2V-18V 1 HOUR VEHICLE CHARGER –
DEWEDW9109
• Fan-cooled technology
cools battery down
quickly
• Charges all DeWALT
7.2V-18V batteries
(except Univolt)
24V batteries in 1 hour
or less
• Charges in 1 hour
or less
• Charges DeWALT batteries from your vehicle
power outlet (except
Univolt)
• Diagnostic with LED indicator are 5 indicators
for battery status
7.2V-18V DUAL PORT 1 HOUR CHARGER –
DEWEDW9216
HD WORKSITE RADIO/CHARGER –
DEWEDC011
• Charges two batteries
in 1 hour or less
• 1 hour charger for 7.2V
to 18V DeWALT battery
packs (except Univolt)
7.2V-18V batteries (except Univolt)
• Charges in 1 hour or less
• Battery thermal protection system
• Patented voltage booster charges whether
vehicle is running or not
• Circuitry boosts input voltage, charge one battery after another
• Heavy-duty AM/FM
radio with auxiliary port
• Runs on 7.6V to 18V DeWALT batteries, making it a cordless radio
• Digital tuner with LCD display, built in clock,
and 8 station memory presets
• High efficiency water resistant speakers
• Dual pivoting 11” flexible antenna
SAFETY SUPPLIES
for battery status
• Automatic shut-off
GENERAL SUPPLIES
for battery status
• Charges in 1 hour or less
LANDSCAPING
HAND TOOLS
24V 1 HOUR FAN COOLED CHARGER –
DEWSDW0246
BITS, BLADES
& ABRASIVES
CHARGERS
WORKWEAR
81
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
POWER TOOLS
CHARGERS/RADIO
UTILITY CENTER/CHARGER/RADIO –
METS49-24-0200
ONE HOUR NI CAD AC CHARGER –
METS48-59-0255
• Rockford Fosgate sound
system w/ punch EQ
• Charges Milwaukee
12V to 18V Power
Plus batteries
• Rugged construction
withstands 8’ drop to
concrete
• Digital tuning with up to
20 presets
• 5-1/4” weather resistant speakers with separate tweeters
BLADE GUARDS
BLADE GUARD – DEWSDW4707
DIAMOND BLADE GUARD – DEWSDW4705
FLARING CUP GUARD – DEWSDW4730
• 7”
• For use on the DW402
4-1/2” grinder
• 4” adjustable guard
• For use on the
DW493/DW494 grinder
• For use on the
DW493/DW494 grinder
• 7”
• Includes guard, backing
flange and clamp nut
FLANGE
DIAMOND WHEEL FLANGE – DEWSDW4706
• For use on the DW402
4-1/2” grinder
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
GUARD KIT – DEWSDW4718
82
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
ABRASIVE BLADES
• 7-1/4” x 1/8”
• 7-1/4” x 1/8”
• Constructed with two
pieces of extra strength
fiberglass
• Constructed with two
pieces of extra strength
fiberglass
• Premium grain for
added wheel life and
speed of cut
added wheel life and
speed of cut
• High quality resin bonds that are 100%
inspected
• High quality resin bonds that are 100%
inspected
CONCRETE & MASONRY
ABRASIVE BLADE-METAL – DEWSDW3511
MATERIAL HANDLING
ABRASIVE BLADE-MASONRY – DEWSDW3521
ABRASIVE BLADES
HIGH SPEED ABRASIVE BLADE –
GREEN CONCRETE
• TARS23027 – QHS-DI
high speed green,
12” x 1/8” x 1”
• TARS30004 – Red GC 7A
series, 14” x 1/4” x 1”
high speed green,
12” x 1/8” x 20mm
• TARS23030 – QHS-DI high speed green,
14” x 1/8” x 20mm
series, 18” x 1/4” x 1”
• TARS30009 – Red GC 7A series, 18” x 3/8” x 1”
• Super premium grade
• Premium/3 grade
• For maximum life on abrasive green concrete
with soft to medium hard aggregates or highly
abrasive asphalt
• High speed dry cutting cast iron/ductile iron
• Also for green concrete with soft aggregate
• TARS23019 – QHS-CM
high speed red,
12” x 1/8” x 1”
high speed red,
12” x 1/8” x 20mm
high speed red, 14” x 1/8” x 20mm
• TARS23021 – QHS-CM high speed red,
14” x 18” x 1”
• Premium/3 grade
BITS, BLADES
& ABRASIVES
high speed green, 14” x 1/8” x 1”
series, 14” x 3/16” x 1”
HIGH SPEED ABRASIVE BLADE – MASONRY
POWER TOOLS
HIGH SPEED ABRASIVE BLADE –
DUCTILE IRON
• High speed dry cutting concrete & masonry
HIGH SPEED ABRASIVE BLADE – METAL
• TARS23024 – QHS-MS
high speed blue,
12” x 1/8” x 20mm
LANDSCAPING
• TARS23023 – QHS-MS
high speed blue,
12” x 1/8” x 1”
HAND TOOLS
• Features a metal arbor hole insert molded into
the blade for extra strength and protection of
the drive shaft
• TARS23025 – QHS-MS high speed blue,
14” x 1/8” x 1”
• Premium/3 grade
• High speed dry cutting in metal
GENERAL SUPPLIES
• TARS23026 – QHS-MS high speed blue,
14” x 1/8” x 20mm
SAFETY SUPPLIES
WORKWEAR
83
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
ABRASIVE BLADES
HIGH SPEED ABRASIVE BLADE – MASONRY
HIGH SPEED ABRASIVE BLADE – METAL
• CLISHSC1201 – 12” x 1”
• CLISHSM1201 – 12” x 1”
• CLISHSC1220 –
12” x 20mm
• CLISHSM1220 –
12” x 20mm
• CLISHSC1401 – 14” x 1”
• CLISHSM1401 – 14” x 1”
• CLISHSC1420 –
14” x 20mm
• CLISHSM1420 –
14” x 20mm
• For concrete/masonry-silicon carbide specification for brick, block, concrete and other
masonry materials
• For metal/steel-aluminum oxide specification
or mild steel, stainless, and metal decking
CHOP SAW BLADES
POWER TOOLS
CHOP SAW WHEEL – DEWSDW8001
• 14” x 7/64” x 1”
general purpose
• Double reinforced
with two full sheets
of fiberglass
BITS, BLADES
& ABRASIVES
added wheel life and speed of cut
• Enhanced formulations provide longer life
• High quality resin bonds
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
DIAMOND BLADES
DIAMOND BLADE-MASONRY –
DEWSDW4712B
• 7” high performance
• Advanced diamond
matrix provides long life
• Thinner kerf to increase
speed of cut while minimizing dust
• Achieves 30X longer life than
bonded abrasives
HIGH SPEED
DIAMOND BLADES
DIAMOND BLADES – TARS542774463
• VH5 series, 14” x .125”
• HI5 series, 14” x .125”
• FC10 series, 14” x .125”
• Quality grade
• For general purpose
cutting of cured concrete and brick
• For fast cutting in a wide
variety of materials on the
first pass, such as cured
concrete and brick
• For fast cutting of hard
cured concrete, pavers,
brick and concrete pipe
• Not recommended for
abrasive materials like block and asphalt
WORKWEAR
• The only all-purpose blade with aggressive
notched segments which grab and grind material for a rapid “first cut”
84
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
HIGH SPEED
DIAMOND BLADES
• TARS590519 – GH5
series, 12” x .125”
• Millenium 375 C series,
24” x .187” x 1”
• GH8 series, 14” x .125”
• TARS590521 – GH5
series, 14” x .125”
• Maximum
performance grade
• TARS590528 – GH5
series, 16” x .125”
• Cured concrete with
flint aggregate and river
gravel with heavy steel
reinforcement
• For maximum life, general
purpose cutting of block,
abrasive block, soft brick
and concrete pavers
• Premium/3 grade
• For general purpose cutting of most concrete,
masonry or stone materials
• Premium/3 grade
• Barracuda series
14” x .125”
• Bannerline blue 200B,
18” x .125” x 1”
• For fast, smooth cuts
on almost any masonry,
tile, stone or hard concrete material
• For fast, smooth cuts
on almost any masonry,
tile, stone or hard concrete material
• For general purpose cutting of soft to mediumhard aggregates with light
steel reinforcing
• Not recommended for abrasive materials like
block and asphalt
• Not recommended for abrasive materials like
block and asphalt
DIAMOND BLADES
• Bannerline red
450BR wide notch,
36” x .175” x 1”
• TARS773652 – EH5
Economy series,
12” x .125”
• EH8 Economy series,
14” x .125”
• TARS773656 – EH5
Economy series,
14” x .125”
• For use on a wide range
of abrasive materials such
as soft brick, abrasive
block and green concrete
or cured concrete with soft aggregate
• Standard undercut retardant
• Quality/2 Grade
• For general purpose cutting of concrete,
masonry and stone
• Quality/2 grade
RUBBING BRICKS – CLIS61463687800
• 8” x 3-1/2” x 1-1/2”
• 6” x 3” x 1”
• Includes handle
• Includes handle
• For removing mold and
form marks, cleaning
castings and rubbing
down concrete
• For removing mold and
form marks, cleaning
castings and rubbing
down concrete
GENERAL SUPPLIES
RUBBING BRICK – CLIS61463687795
LANDSCAPING
RUBBING BRICKS
HAND TOOLS
• For cutting a wide range
of aggregates, asphalt
over concrete or asphalt with hard aggregate
BITS, BLADES
& ABRASIVES
• Barracuda series
14” x .125”
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
DIAMOND BLADES
SAFETY SUPPLIES
WORKWEAR
85
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WHEELS
CHOP SAW WHEEL-METAL – SAIS24051
CUP WHEELS-CONCRETE – SAIS26004
CUP WHEELS-CONCRETE - SAIS26024
• 14” x 3/32” x 1”
• 4” x 3” x 2” x 5/8”-11
• 6” x 4-3/4” x 2” x 5/8”-11
• Chop saw wheel-type 1
• C16, metal backing
• C16, metal backing
• Iron worker
• Silicon carbide grain
• Coarse grit wheel for
tough grinding applications
• Coarse grit wheel
for tough grinding
applications
• Excellent for cleaning castings, mold marks,
removing flashing
removing flashing
• Ferrous metals
• Ferrous metals
CUP WHEELS-METAL – SAIS26003
CUP WHEELS-METAL – SAIS26023
CUT-OFF WHEEL-METAL – SAIS23064
• 4” x 3” x 2” x 5/8”-11
• 6” x 4-3/4” x 2” x 5/8”-11
• 4” x .035 x 5/8”
• A16, metal backing
• A16, metal backing
• Aluminum oxide grain
• Thin high speed cut-off
wheel-type 1
• Coarse grit for tough
• Coarse grit for tough
• A60T
removing flashing
• Excellent for cleaning
castings, mold marks, removing flashing
• Use with reusable 5/8”11 adaptor to fit right for angle grinders
• Masonry, concrete, stone
• Extremely fast cutting with long life
• Thin .045 width
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Ferrous and/or non ferrous metals (iron, steel,
welds, etc.)
CUTTING WHEEL-METAL – SAIS22021
• 4-1/2” x .045 x 7/8”
• 6” x .045 x 7/8”
• 4-1/2” x .045 x 7/8”
• High speed cut-off
wheel-type 1
wheel-type 1
• Depressed center-type 27
• A60S
• A60S
• For the pipeline industry
• Thin .045 width
• Use with reusable 5/8”11 adaptor to fit right for angle grinders
• Provides consistent performance with long life
• Designed and manufactured to perform both cutting and
light grinding
• Ferrous metals (steel, angle iron, rebar)
• Extremely fast cutting with long life
• A60S
• Ferrous metal (steel, cast iron, etc.)
CUTTING WHEEL-STAINLESS STEEL –
SAIS22082
CUTTING-NOTCHING WHEEL-METAL –
SAIS22020
GRINDING WHEEL-CONCRETE – SAIS20061
• 6” x .045 x 7/8”
• 4-1/2” x 3/32” x 7/8”
• 4-1/2” x 1/4” x 7/8”
• Cutting wheel-type 27
• Saitech
• Depressed
center-type 27
• Depressed
center-type 27
• A24R
• C24N
• Designed and manufactured to perform both
cutting and light grinding
• So unique it is
patent pending
• Stainless steel and
other high tensile alloys
• Special aluminum oxide grain
• Ferrous metals (iron, steel, welds, etc)
• Hard bond for extremely long life
• Fast, burr free cutting
• Ferrous and non-ferrous metals (iron, steel,
welds, etc.)
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Ferrous and/or non ferrous metals (iron, steel,
welds, etc.)
86
Call us at: 8 00-6 6 9-778 8
• 4-1/2” x 1/4” x 7/8”
• 4-1/2” x 1/4” x 7/8”
• C24N
• A24N
• A24R
• Soft bond for fast stock
removal
removal
removal
• Ferrous metal (iron, steel, welds, etc)
• Cast iron and other ferrous metals
• Cast iron and other ferrous metals
• Low grade stainless steel
GRINDING WHEEL-METAL – SAIS20085
• 7” x 1/4” x 5/8”-11
• 7” x 1/4” x 5/8”-11
• 4-1/2” x 1/4” x 5/8”-11
• A24N
• A24R
• Depressed
center-type 27
• A24R
• Most popular-general
purpose
• Most popular-general
purpose
• Stainless steel and other
high tensile alloys
• Ferrous metals (iron, steel, welds, etc)
GRINDING WHEEL-STAINLESS STEEL –
SAIS20064
GRINDING WHEEL-STAINLESS STEEL –
SAIS20164
HIGH SPEED CUT-OFF WHEEL PORTABLE
SAWS-CONCRETE – SAIS23235
• 4-1/2” x 1/4” x 7/8”
• 4-1/2” x 1/4” x 5/8”-11
• 7” x 3/32” x 5/8”
• Saitech-type 27
• Saitech-type 27
• Combines fast stock
removal with long life
• Combines fast stock
removal with long life
wheel-type 1
• Hard bond for edge and bevel grinding
• Hard bond for edge and bevel grinding
• Provides consistent performance with long life
• Ferrous metals (steel, angle iron, rebar)
SAWS-CONCRETE – SAIS23451
SAWS-METAL – SAIS23234
SAWS-METAL – SAIS23450
• 14” x 1/8” x 1”
• 7” x 3/32” x 5/8”
• 14” x 1/8” x 1”
wheel-type 1
wheel-type 1
wheel-type 1
• C24R
• A24R
• A24R
• Fast cutting
• Long life
• Long life
• Excellent for use on angle iron, channel iron,
heavy rebar and other ferrous metals
• Stone, brick, soft aggregate, masonry,
concrete
• Stone, brick, soft aggregate, masonry,
concrete
BITS, BLADES
& ABRASIVES
• 9” x 1/4” x 5/8”-11
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
GRINDING WHEEL-CONCRETE – SAIS20097
LIGHT EQUIPMENT
WHEELS
• C24R
HAND TOOLS
LANDSCAPING
GENERAL SUPPLIES
• Structural metal applications
SAFETY SUPPLIES
WORKWEAR
87
WHEELS
SPECIALTY CUTTING & LIGHT GRINDING
WHEEL-METAL – SAIS22030
• 4-1/2” x 1/8” x 7/8”
• 7” x 1/8” x 5/8”-11
• 4-1/2” x 1/8” x 5/8”-11
• Pipeline-type 27
• So unique it is patent
pending
• Hard bond for aggressive
cutting on rough applications
• Designed and manufactured to perform both
cutting and light grinding
• Wheel can be mounted
to right angle grinders with standard type 27
flanges
• Ferrous metals (iron, steel, welds, etc
• Stainless steel
• Fast cutting with long life
• Stainless steel, high tensile alloys
• Ferrous metals (iron, steel, welds, etc.)
WHEELS
FLAP WHEEL – DEWSDW8306
FLAP WHEEL - DEWSDW8308
• 4-1/2” x 7/8” 36 grit
• 4-1/2” x 7/8” 80 grit
• 4-1/2” x 7/8” 80 grit
• Zirconia grit, 3X faster
material removal than
fiber resin
fiber resin
fiber resin
• Premium abrasive cloth,
15X longer life than fiber
resin
resin
resin
• Type 29 fiberglass backing, allows full use of
the disc
the disc
the disc
• 4-1/2” x 7/8” 120 grit
fiber resin
resin
the disc
GRINDING STONES
GRINDING STONE – TARS21327
• 2” x 2” x 4”
• 2” x 2” x 4”
• 2” x 2” x 4”
• 10 grit (coarse)
• 24 grit (medium)
• 80 grit (fine)
• For cleaning castings
and dressing grinding wheels
• For cleaning castings and
dressing grinding wheels
• For cleaning castings and
dressing grinding wheels
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
88
Call us at: 8 00-6 6 9-778 8
• 7” x 1/4” x 7/8”
• 7” x 1/4” x 5/8”-11
• 3 full sheets of fiberglass
• Use of 100% virgin grain
for enhanced removal
and long life
and long life
• Proprietary material mix
and long life
• Premium resin bonds 100% inspected
GRINDING WHEEL – DEWSDW4514
• 4-1/2” x 1/4” x 7/8”
general purpose
• 4-1/2” x 1/8” x 7/8”
General Purpose
• 4-1/2” x 1/4” x 7/8”
concrete/masonry
and long life
and long life
POWER TOOLS
CONCRETE & MASONRY
CUTTING & GRINDING WHEEL-GENERAL PURPOSE – DEWSDW4999
MATERIAL HANDLING
CUTTING & GRINDING WHEEL-GENERAL PURPOSE – DEWSDW4719
LIGHT EQUIPMENT
GRINDING WHEELS
BITS, BLADES
& ABRASIVES
SAW BLADES
CIRCULAR SAW BLADE – IRWS24030
• 7-1/4” 24 Tooth
• Framing/ripping
• Thin kerf for fast cuts
HAND TOOLS
• Construction carbide teeth
for longer life
• Fully hardened plate runs truer longer
• Reinforced shoulder for added durability
• Specially engineered vents reduced heat buildup and warping
LANDSCAPING
SAW BLADES
CIRCULAR SAW BLADES – METS48-40-4505
• 6-1/2” 48 teeth
• 14” 72 teeth
• 14” 90 teeth
• 5/8” arbor
• Carbide tipped for longer life
• Carbide tipped for longer life
• Anti-kickback design
• 1” arbor hole
• 1” arbor hole
• Cuts ferrous metals
• Hardened steel body
• Vibration dampening
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
89
SAW BLADES
• 8” 42 teeth
• 8” 50 teeth
• Cermet tipped for longer life,
more wear resistant
• Cermet tipped for longer life,
more wear resistant
• 5/8” arbor hole
• 5/8” arbor hole
SAW BLADES
METAL CUTTING BLADE-CORDLESS –
DEWSDW7763
METAL CUTTING BLADE-STATIONARY –
DEWSDW7737
DEWSDW7745
• 6-3/4” 40T metal cutting
carbide tipped blade
• 12” 60T heavy gauge
ferrous metal cutting
blade
• 14” 90T light gauge
blade
• 12% titanium carbide
provides long life
provides long life
• Modified ATB tooth
geometry for clean, burr free cuts
• Thin kerf requires less energy
• Tri-foil braze absorbs stress
• High back shoulder for increased strength
• Expansion slots dissipate heat
DEWSDW7747
PORTABLE SAW WHEEL – DEWSDW8023
SAW BLADE – DEWSDW3103
• 14” 70T heavy gauge
blade
• 12” x 1/8” x 20mm
metal portable saw
cutoff wheel
• 10” 32T general purpose
provides long life
• Thicker fiberglass to
withstand extreme
applications
• Counter balanced plate
reduces vibration
• Specially formulated
titanium carbide teeth
• Modified alternate
top grind for clean,
smooth cuts
• Specially formulated to provide fast,
free cutting
• Premium grain for added wheel life and speed
• Thin kerf for fast and
smooth cutting action
• Exclusive wedge shoulder
design puts more steel behind each tip
• High quality resin bonds
• 10” 60T fine finish
• 10” 24T fast ripping
• 12” 32T general purpose
reduces vibration
reduces vibration
reduces vibration
• Exclusive wedge shoulder design puts more steel behind each tip
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
90
Call us at: 8 00-6 6 9-778 8
• 12” 80T circular saw
• 7-1/4” 36T carbide
thin kerf
thin kerf
• Tougher tungsten carbide
stays sharper longer
• Anti-stick coating reduces
friction and gum up
friction and gum up
• Thin kerf for smoother cuts
• Ribbed heat vents allow blade to run cooler
• 5/8” arbor with diamond knock out
SAW BLADE – DEWSDW3215TK
• 7-1/4” 18T nail cutting
thin kerf
• 10” 60T fine crosscut
reduces vibration
• Exclusive wedge shoulder design puts more steel behind each tip
• Flush ground teeth and
reinforced shoulder
friction and gum up
• Anti-stick rim reduces friction and gum up
• Anti-stick coating
reduces friction
• Thin kerf provides a
clean, smooth finish
• Large, micrograin carbide
teeth for more resharpenings
POWER TOOLS
• Rock carbide teeth
provide maximum
resistance
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAW BLADES
reduces friction
reduces friction
• Large, micrograin carbide teeth for more resharpenings
• Large, micrograin carbide
teeth for more resharpenings
SAW BLADE-CARBIDE TIPPED –
DEWSDW3576
thin kerf
friction and gum up
HAND TOOLS
BITS, BLADES
& ABRASIVES
DEWSDW3591B10
• 7-1/4” 24T framing carbide thin kerf circular
• 7-1/4” 18T nail cutting
• Tougher tungsten
carbide stays
sharper longer
• Flush ground teeth and
reinforced shoulder
• Anti-stick rim reduces
friction and gum up
saw blade
• Aluminum/
nonferrous metals
• Ultra thin kerf blade for
fast cutting
• Anti-stick rim reduces friction and gum up
GENERAL SUPPLIES
reduces friction and
gum up
• Rock carbide teeth provide maximum resistance
SAW BLADE-CORDLESS – DEWSDW9052
LANDSCAPING
DEWSDW3578B10
• 5-3/8” 24T carbide blade
• Smooth woodcutting
• Fast woodcutting
• Aluminum
fast cutting
fast cutting
friction and gum up
friction and gum up
fast cutting
friction and gum up
WORKWEAR
• 5-3/8” 78T aluminum
cutting blade
SAFETY SUPPLIES
91
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAW BLADES
SAW BLADE-STEEL
• Framing
• Fast cutting
• DEWSDW3323 – 7-1/4”
20T steel fast cut steel
fast cutting
fast cutting
• DEWSDW3324 – 7-1/4”
100T steel crosscut
friction and gum up
friction and gum up
• DEWSDW3325 – 7-1/4”
40T steel combo
SAW BLADE-STEEL
SAW BLADE-STEEL
• DEWSDW3326 – 7-1/4” 140T steel hollow
ground plywood
• DEWSDW3329 –
7-1/4” 68T steel
non-ferrous Steel
• DEWSDW3370 – 10” 30T
steel fast cut
• DEWSDW3372 – 10”
80T steel hollow
ground planer
• DEWSDW3332 – 7-1/4”
60T steel master combo
POWER TOOLS
• DEWSDW3350 – 8-1/4”
40T steel combination
• Precision sharpened teeth for fast, smooth
cuts and longer life
• Blade coating prevents rust and
reduces friction
reduces friction
• Thicker body provides increased durability in
heavy-duty applications
• Fully hardened steel body prevents warping
and binding
and binding
SAW BLADE-STEEL – DEWSDW3524
• 7-1/4” combo
• 7-1/4” crosscut
• 7-1/4” hollow ground ply
• Precision sharpened
teeth for fast, smooth
• Precision sharpened teeth
for fast, smooth cuts and
longer life
longer life
• Blade coating prevents
rust and reduces friction
and binding
and binding
and binding
BAND SAW BLADES
SAFETY SUPPLIES
HAND TOOLS
LANDSCAPING
and binding
reduces friction
• Precision sharpened teeth for fast, smooth
GENERAL SUPPLIES
BITS, BLADES
& ABRASIVES
longer life
• DEWSDW3327 – 7-1/4” 60T steel hollow
ground planer
BAND SAW BLADES
• METS48-39-0502 –
10 TPI 44-7/8”
• METS48-39-0512 –
14 TPI 44-7/8”
• METS48-39-0522 –
18 TPI 44-7/8”
• METS48-39-0532 – 24 TPI 44-7/8”
• Bi-metal construction
• Matrix II high speed steel teeth with 8% cobalt
• For cutting stock 5/16” to 1/2” thick
WORKWEAR
• For use with portable band saws using
44-7/8” x 1/2” x .020” blades
92
Call us at: 8 00-6 6 9-778 8
CRIMPED WIRE CUP BRUSHES – MMBS20390
FULL CABLE TWIST WIRE BRUSH –
MMBS23600
• 1” x .014” crimped
end brush
• 3” x .0118” crimped wire
cup brush
• 4” x .020” full cable
twist wire wheel brush
• Max safe free speed
20,000 rpm
• 5/8”-11 arbor
• 5/8”-11 arbor
• Carbon steel wire
• Designed for lighter jobs
and where greater brushing flexibility is desired
• Made with larger knots
than the stringer bead
• This brush covers more surface in a single
pass in unconfined area applications
• Quickly removes light rust and oxides
• Ruggedly constructed for heavy-duty work
• Easy to handle, heavily filled for fast brushing
action
KNOT STYLE CUP BRUSHES
• MMBS20160 – 5/8”-11
arbor, carbon steel wire
• MMBS20161 – 1/2”-13
arbor, carbon steel wire
• 4” x .020” standard twist
carbon steel wire-single
row
• 6” x .020” standard
twist carbon steel wiresingle row
• Knots twisted over part
of their length provide
medium flexibility
medium flexibility
• Max safe free speed 7000 rpm
• Max safe free speed 6000 rpm
STRINGER BEAD TWIST BRUSH
STRINGER BEAD TWIST BRUSH –
MMBS23620
• MMBS23610 –
5/8”-11 arbor
• 4” x .020” stringer
bead twist wire brush
• MMBS23611 –
1/2”-13 arbor
• 5/8”-11 arbor
• 4” x .020” stringer bead
twist wire brush
• This “mini” stringer
bead brush is unexcelled for stringer bead weld cleaning
• Used for cleaning welds and for operating in
tight places such as corners, angle welds and
T-connections
BITS, BLADES
& ABRASIVES
• MMBS20170 – 5/8”-11 arbor, stainless
steel wire
SERVUS-BILT WIRE CUP BRUSHES –
MMBS20111
POWER TOOLS
• 2-3/4” x .020” knot style
cup brushes
MMBS20103
CONCRETE & MASONRY
• Excellent for flat surface and edge cleaning
MATERIAL HANDLING
CRIMPED END BRUSH – MMBS20407
LIGHT EQUIPMENT
BRUSHES
• Especially suited for pipe bevel cleaning
• 6” x .035” standard twist
carbon steel wire-double
row hd
• Max safe free speed
6000 rpm
• This “mini” stringer bead brush is unexcelled
for stringer bead weld cleaning
• Widely used in nuclear power plant
construction where piping, tubing and
fittings are joined
WIRE DUSTER – MMBS20513
• 2-3/4” x 1-1/8”
GENERAL SUPPLIES
• Widely used in nuclear power plant
construction where piping, tubing and
fittings are joined
• Stainless steel wire
LANDSCAPING
medium flexibility
HAND TOOLS
MMBS20125
• Soft brushing action
SAFETY SUPPLIES
WORKWEAR
93
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CARBIDE BITS
CARBIDE HAMMER BIT SET – DEWSDW5207
HAMMER/PERCUSSION DRILL BITS
• 7 PC
• DEWSDW5221 – 1/8” x 3”
• Innovative tip reduces
walking
• DEWSDW5222 – 3/16” x 3”
• Improved carbide tip up
to 2X longer life
• DEWSDW5224 – 1/4” x 4”
• Optimum grade
of carbide
• DEWSDW5226 – 1/4” x 12”
• DEWSDW5223 – 3/16” x 6”
• DEWSDW5225 – 1/4” x 6”
• DEWSDW5227 – 5/32” x 6”
• Unique flute design
• DEWSDW5228 – 5/16” x 6”
• DEWSDW5229 – 5/16” x 12”
• DEWSDW5230 – 3/8” x 6”
• DEWSDW5231 – 3/8” x 12”
• DEWSDW5234 – 7/16” x 6”
POWER TOOLS
• DEWSDW5235 – 1/2” x 6”
• DEWSDW5236 – 1/2” x 12”
• DEWSDW5241 – 5/8” x 6”
• DEWSDW5242 – 5/8” x 12”
• DEWSDW5244 – 3/4” x 6”
• DEWSDW5245 – 3/4” x 12”
BITS, BLADES
& ABRASIVES
• DEWSDW5249 – 1” x 12”
• Innovative tip reduces walking
• Improved carbide tip up to 2X longer life
• Optimum grade of carbide
CORE BITS
CORE BIT BODY
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• Unique flute design
• DEWSDW5900 – 1-1/2” x 4”
• DEWSDW5901 – 2” x 4”
• DEWSDW5902 – 2-1/2” x 4”
• DEWSDW5903 – 3” x 4”
• DEWSDW5904 – 3-1/2” x 4”
SAFETY SUPPLIES
• DEWSDW5905 – 4” x 4”
• DEWSDW5906 – 5” x 4”
• DEWSDW5907 – Centering core bit body
• DEWSDW5909 – 7” spline core bit shank
• DEWSDW5910 – 16” spline core bit shank
• Tungsten carbide teeth for max durability
WORKWEAR
• Hardened steel body resists breakage
94
Call us at: 8 00-6 6 9-778 8
• TARS684015 – 1.5”
• TARS780102 – 1”
• TARS780220 – 1”
• TARS684020 – 2”
• TARS780106 – 1.5”
• TARS780224 – 1.5”
• TARS684025 – 2.5”
• TARS780109 – 2”
• TARS780225 – 1.75”
• TARS684030 – 3”
• TARS780111 – 2.5”
• TARS780228 – 2.25”
• TARS684040 – 4”
• TARS780113 – 3”
• TARS780229 – 2.5”
• TARS684050 – 5”
• TARS780114 – 3.25”
• TARS780231 – 3”
• TARS681956 – 6”
• TARS780116 – 4”
• TARS780232 – 3.25”
• Dri bits standard
• TARS780117 – 4.25”
• TARS780233 – 3.5”
• Maximum performance blade grade
• TARS780118 – 4.5”
• TARS780235 – 4.25”
• General purpose, masonry: Dri bits for drilling
brick and lightweight block materials
• TARS780119 – 5”
• TARS780236 – 4.5”
• TARS780121 – 6”
• TARS780237 – 5”
• Not recommended for use on cured concrete
• TARS780124 – 8”
• TARS780239 – 6”
• TARS780126 – 10”
• TARS780241 – 7”
• Banner Line
• Millenium 5400 standard
• High performance grade
• For general purpose drilling of concrete,
masonry and brick, including concrete with
soft to hard aggregate and light to medium
steel reinforcing
• For drilling cured, reinforced concrete with
medium to hard aggregates and medium to
heavy steel reinforcing
BITS, BLADES
& ABRASIVES
• Also effective on granite, marble and stone
CORE BITS
TYPE 1 “SLICER” CUTTING WHEELS
TYPE 1 “SLICER” CUTTING WHEELS
POWER TOOLS
DIAMOND CORE BIT
CONCRETE & MASONRY
DIAMOND CORE BIT
MATERIAL HANDLING
DIAMOND CORE BIT
LIGHT EQUIPMENT
CORE BITS
TYPE 27 DEPRESSED CENTER CUTTING
WHEELS
• MTBS55345 – 6” x 1/16” x 7/8”
• MTBS55346 – 4-1/2” x .045 x 7/8”
• A 60 TZ
• A 60 TZ
• MTBS55347 – 6” x .045 x 7/8”
• Aluminum oxide wheel
for steel and other ferrous metals
• Aluminum oxide wheel
for steel and other ferrous metals
• A 60 TZ
• Extremely fast rate of cut
• Aluminum oxide wheel for
steel and other ferrous
metals
• Good wheel life
• Good wheel life
• Good wheel life
LANDSCAPING
• MTBS55339 – 6” x .040 x 7/8”
HAND TOOLS
• MTBS55331 – 4-1/2”x .040 x 7/8”
• MTBS55334 – 5” x .040 x 7/8”
DRILL BITS
• 12” bull point
• 20” bull point
• 3” x 12” scaling
• For light chipping and chiseling
• Used on tile, mortar, glazing compounds and other masonry
• For light chipping and
chiseling
3/4” HEX SHANK STEELS-CHISEL –
DEWSDW5954
DEWSDW5958
• 1” x 20” cold
• 3/4” ground rod driver
• For light chipping
and chiseling
• For light chipping and
chiseling
• Used on tile, mortar, glazing compounds and
other masonry
other masonry
other masonry
WORKWEAR
DEWSDW5952
SAFETY SUPPLIES
DEWSDW5951
GENERAL SUPPLIES
DEWSDW5950
95
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
DRILL BITS
BLACK OXIDE 12” DRILL BITS
BLACK OXIDE REDUCED SHANK DRILL BITS
COBALT SPLIT POINT DRILL BIT
• DEWSDW1620 – 9/16”
• DEWSDW1204 – 1-1/16”
• DEWSDW1602 – 1/8”
• DEWSDW1622 – 5/8”
• DEWSDW1205 – 5/64”
• DEWSDW1604 – 3/16”
• DEWSDW1623 – 11/16”
• DEWSDW1206 – 3/32”
• DEWSDW1606 – 1/4”
• DEWSDW1625 – 3/4”
• DEWSDW1207 – 7/64”
• DEWSDW1608 – 5/16”
• DEWSDW1627 – 7/8”
• DEWSDW1208 – 1/8”
• DEWSDW1610 – 3/8”
• DEWSDW1629 – 1”
• DEWSDW1209 – 9/64”
• DEWSDW1612 – 7/16”
• 135 degree split point drills on
contact and prevents walking
• DEWSDW1210 – 5/32”
• 135 degree split point drills on
contact and prevents walking
• Parabolic flute design improves chip ejection
• DEWSDW1212 – 3/16”
• Black oxide coated for greater wear resistance
• Parabolic flute design improves chip ejection
• DEWSDW1214 – 7/32”
• Helix is 31 degrees, minimizes the over
aggressiveness of a true parabolic flute
• DEWSDW1216 – 1/4”
• DEWSDW1614 – 1/2”
• Black oxide coated for greater wear resistance
POWER TOOLS
• Helix is 31 degrees, minimizes the over
aggressiveness of a true parabolic flute
PILOT POINT DRILL BIT
• DEWSDW1904 – 1/16”
BITS, BLADES
& ABRASIVES
• DEWSDW1906 – 3/32”
HAND TOOLS
• DEWSDW1224 – 3/8”
COBALT SPLIT POINT DRILL BIT-13 PC SET –
DEWSDW1263
• 1/16”, 5/64”, 3/32”,
7/64”, 1/8”, 9/64”,
5/32”, 3/16”, 7/32”, 1/4”
• DEWSDW1908 – 1/8”
• 135 degree split point
drills on contact and
prevents walking
• DEWSDW1909 – 9/64”
• Industrial grade cobalt steel
• DEWSDW1910 – 5/32”
• Ideal for drilling in stainless steel, abrasive
metal and other hard to drill alloys
• DEWSDW1907 – 7/64”
• DEWSDW1911 – 11/64”
• DEWSDW1912 – 3/16”
• DEWSDW1232 – 1/2”
• 135 degree split point drills on contact and
prevents walking
• Industrial grade cobalt steel
• Ideal for drilling in stainless steel, abrasive
metal and other hard to drill alloys
• DEWSDW1913 – 13/64”
PILOT POINT DRILL BIT-16 PC SET –
DEWSDW1956
SELF FEED BIT
• DEWSDW1914 – 7/32”
• 1/16”- 1/2”
• DEWSDW1630 – 1”
• DEWSDW1915 – 15/64”
• Pilot point tip starts
on contact
• DEWSDW1631 – 1-1/8”
• No-spin shank
• DEWSDW1633 – 1-3/8”
• tapered web
• DEWSDW1634 – 1-1/2”
• DEWSDW1916 – 1/4”
• DEWSDW1917 – 17/64”
LANDSCAPING
• DEWSDW1220 – 5/16”
• DEWSDW1228 – 7/16”
• DEWSDW1905 – 5/64”
GENERAL SUPPLIES
• DEWSDW1211 – 11/64”
• DEWSDW1918 – 9/32”
• DEWSDW1632 – 1-1/4”
• DEWSDW1919 – 19/64”
• DEWSDW1635 – 1-3/4”
• DEWSDW1920 – 5/16”
• DEWSDW1636 – 2”
• DEWSDW1921 – 21/64”
• DEWSDW1637 – 2-1/8”
• DEWSDW1922 – 11/32”
• DEWSDW1638 – 2-1/4”
• DEWSDW1923 – 23/64”
• DEWSDW1639 – 2-9/16”
• DEWSDW1924 – 3/8”
• 2-cutter design
• DEWSDW1925 – 25/64”
• Aggressive self-feed spur
• DEWSDW1926 – 13/32”
• Shank flats for better retention
SAFETY SUPPLIES
• DEWSDW1927 – 27/64”
• DEWSDW1928 – 7/16”
• DEWSDW1929 – 29/64”
• DEWSDW1930 – 15/32”
• DEWSDW1931 – 31/64”
• DEWSDW1932 – 1/2”
• Pilot point tip starts on contact
WORKWEAR
• No-spin shank
96
• Tapered web
Call us at: 8 00-6 6 9-778 8
BRUTE PLATINUM MECHANICS DRILL BITS,
29 PIECE – CHPS129-XL28
JOBBER BITS
• CHPSXL28-1/8 – 1/8”
• 1/16” - 1/2”
• CHPS705SP-1/16 – 1-16”
• CHPSXL28-13/32 – 13/32”
• Engineered for high performance
• CHPS705SP-1/2 – 1/2”
• The three-flat shank
design ensures a positive
grip in both keyless and
conventional power tools
• CHPS705SP-1/8 – 1/8”
• Self centering 135 degree split point eliminates the need for pilot hole drilling
• CHPS705SP-13/32 – 13/32”
• CHPSXL28-17/64 – 17/64”
• CHPSXL28-21/64 – 21/64”
• CHPSXL28-3/16 – 3/16”
• CHPSXL28-5/16 – 5/16”
• CHPSXL28-7/32 – 7/32”
• CHPSXL28-9/32 – 9/32”
• CHPSXL28-9/64 – 9/64”
• Engineered for high performance
• Specially designed for today’s portable
drill users
• CHPS705SP-11/64 – 11/64”
• CHPS705SP-13/64 – 13/64”
• CHPS705SP-15/32 – 15/32”
• CHPS705SP-15/64 – 15/64”
• CHPS705SP-17/64 – 17/64”
• CHPS705SP-19/64 – 19/64”
• CHPS705SP-21/64 – 21/64”
• CHPS705SP-23/64 – 23/64”
• Self centering 135 degree split point eliminates the need for pilot hole drilling
• CHPS705SP-25/64 – 25/64”
POWER TOOLS
• The three-flat shank design ensures a positive
grip in both keyless and conventional power
tools
• An exclusive combination of premium high
speed steel, superior geometry and unique
NOMO treatment maximizes the number of
holes per drilling
• CHPS705SP-11/32 – 11/32”
CONCRETE & MASONRY
• CHPSXL28-5/64 – 5/64”
• CHPS705SP-1/4 – 1/4”
MATERIAL HANDLING
BRUTE PLATINUM MECHANICS DRILL BITS
LIGHT EQUIPMENT
DRILL BITS
• CHPS705SP-27/64 – 27/64”
• An exclusive combination of premium high
speed steel, superior geometry and unique
NOMO treatment maximizes the number of
holes per drilling
• CHPS705SP-29/64 – 29/64”
• CHPS705SP-3/16 – 3/16”
• CHPS705SP-3/8 – 3/8”
• CHPS705SP-31/64 – 31/64”
BITS, BLADES
& ABRASIVES
• CHPS705SP-3/32 – 3/32”
• Specially designed for today’s portable
drill users
• CHPS705SP-5/16 – 5/16”
• 1/16” - 1/2”
• 1/16” - 3/8”
• Designed specifically for
the drilling of high tensile
martensitic stainless steels,
titanium alloys and hard
steel
the drilling of high tensile martensitic stainless steels, titanium
alloys and hard steel
• Feature a heavy-duty 135
degree split point for self centering and quick
penetration
• Feature a heavy-duty 135 degree split point for
self centering and quick penetration
• Heavy-duty web geometry provides added
rigidity to minimize drill breakage when
drilling up to 3 times the drill diameter
SILVER & DEMING DRILL BITS
• 1/16” - 1/2”
• CHPSUS12-1 – 1”
the drilling of high tensile
martensitic stainless steels,
titanium alloys and hard
steel
• CHPSUS12-11/16 – 11/16”
• Feature a heavy-duty 135
degree split point for self centering and quick
penetration
• CHPSUS12-3/4 – 3/4”
• CHPS705SP-7/16 – 7/16”
• CHPS705SP-7/32 – 7/32”
• CHPS705SP-9/32 – 9/32”
• CHPS705SP-9/64 – 9/64”
• Designed specifically for the drilling of high
tensile martensitic stainless steels, titanium
alloys and hard steel
• Feature a heavy-duty 135 degree split point for
self centering and quick penetration
• CHPSUS12-1-1/4 – 1-1/4”
• CHPSUS12-13/16 – 13/16”
• CHPSUS12-17/32 – 17/32”
• CHPSUS12-5/8 – 5/8”
• CHPSUS12-7/8 – 7/8”
SAFETY SUPPLIES
• CHPS705SP-5/64 – 5/64”
GENERAL SUPPLIES
JOBBER BITS, 29 PIECE SET – CHPS129SP
• CHPS705SP-5/32 – 5/32”
LANDSCAPING
HAND TOOLS
• CHPSUS12-9/16 – 9/16”
• Ideal for drilling in both low and medium tensile strength materials
WORKWEAR
• S&D drills should not be used to enlarge holes
97
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
DRILL BITS
AUGER BIT EXTENSION – IRWS43907
LONG SHIP AUGER BITS
QUICK CHANGE BIT EXTENSION – IRWS90112
• 18” extension
• IRWS47306 – 3/8”
• 12” extension
• Six flatted shank provides better chuck grip
and reduces slippage
• IRWS47308 – 1/2”
• Tapered head design
guides the extension
through the hole
• IRWS47309 – 9/16”
• IRWS47310 – 5/8”
• Hex key included
• IRWS47311 – 11/16”
• IRWS47312 – 3/4”
• IRWS47313 – 13/16”
• IRWS47314 – 7/8”
SPEEDBOR FLAT BITS
• IRWS47316 – 1”
• IRWS87910 – 5/8”
• IRWS47320 – 1-1/4”
• IRWS87912 – 3/4”
• IRWS47324 – 1-1/2”
POWER TOOLS
• IRWS47314 – 7/8”
• IRWS87924 – 1-1/2”
BITS, BLADES
& ABRASIVES
HAND TOOLS
• IRWS88805 – 5/16”
• IRWS88806 – 3/8”
• IRWS88808 – 1/2”
• IRWS88809 – 9/16”
• IRWS88810 – 5/8”
• Patented micro-groove cutting edge and spurs
produce a smoother hole finish
• Double spur design scribes the hole before the
chips are made
• Cuts through nails without damaging the bit
• IRWS88813 – 13/16”
• Full length heat treatment guards against
bending in heavy-duty applications
• IRWS88814 – 7/8”
• Hollow center flutes clear chips quickly out of
holes
• IRWS88816 – 1”
• All bits have a 1/4” hex shank that fits all drills
and 1/4” quick change adapters
• All bits are 4” long
• Wide lands help keep bit straight as it bores
• Medium fast screw point ideal for general
woodboring applications
SPEEDBOR SET – IRWS88899
LANDSCAPING
SPEEDBOR FLAT BITS
• Single cutter and side lip effortlessly bores
holes in wood where nails may be encountered
• Shorter bit length gets into confined space
(between studs)
GENERAL SUPPLIES
• Slim diameter chuck and extension will pass
through 11/16” hole
• IRWS47315 – 15/16”
• IRWS87908 – 1/2”
• IRWS87920 – 1-1/4”
• All bits have a 12” twist length and 17” overall
length
• 6 Piece, 3/8”, 1/2”, 5/8”,
3/4”, 7/8” and 1”
• Patented micro-groove
cutting edge and spurs
produce a smoother hole
finish
• IRWS88811 – 11/16”
• IRWS88812 – 3/4”
• IRWS88815 – 15/16”
• IRWS88818 – 1-1/8”
• IRWS88820 – 1-1/4”
• IRWS88822 – 1-3/8”
• IRWS88824 – 1-1/2”
• Patented micro-groove cutting edge and spurs
produce a smoother hole finish
• Double spur design scribes the hole before the
chips are made
• Double spur design
scribes the hole before
the chips are made
• All bits are 6” long
HACKSAW BLADES
REPLACEMENT BLADES – LENS20110-018HE
• 10” 18 tooth
• 10” 24 tooth
• 12” 18 tooth
• Shatter resistant bi-metal construction allows
blades to bend and flex
• Longer life TUFF TOOTH design eliminates
tooth strippage
tooth strippage
tooth strippage
WORKWEAR
SAFETY SUPPLIES
• Recessed black sleeve prevents accidental release
98
Call us at: 8 00-6 6 9-778 8
• 12” 24 tooth
• 12” 32 tooth
tooth strippage
tooth strippage
HOLE SAW
HOLE SAW MANDREL
• DEWSD180012 – 3/4”,
460 max speed
• DEWSDW1800 – 1/4”
• DEWSD180014 – 7/8”,
390 max speed
• Standard thread and quick
change mandrels
• DEWSD180016 – 1”,
350 max speed
• 1/4” or larger chuck capacity
CONCRETE & MASONRY
HOLE SAWS
MATERIAL HANDLING
LIGHT EQUIPMENT
HACKSAW BLADES
• DEWSDW1803 – 7/16”
POWER TOOLS
• DEWSD180012 – 1-1/8”,
300 max speed
• DEWSD180019 – 1-3/16”, 285 max speed
• DEWSD180022 – 1-3/8”, 250 max speed
• DEWSD180024 – 1-1/2”, 230 max speed
BITS, BLADES
& ABRASIVES
• DEWSD180020 – 1-1/4”, 275 max speed
• DEWSD180028 – 1-3/4”, 195 max speed
• DEWSD180032 – 2”, 170 max speed
• DEWSD180034 – 2-1/8”, 160 max speed
• DEWSD180038 – 2-3/8”, 140 max speed
• DEWSD180040 – 2-1/2”, 135 max speed
HAND TOOLS
• DEWSD180036 – 2-1/4”, 150 max speed
• DEWSD180044 – 2-3/4”, 125 max speed
• DEWSD180048 – 3”, 115 max speed
• DEWSD180056 – 3-1/2”, 95 max speed
• DEWSD180058 – 3-5/8”, 95 max speed
LANDSCAPING
• DEWSD180052 – 3-1/4”, 105 max speed
• DEWSD180060 – 3-3/4”, 90 max speed
• DEWSD180064 – 4”, 85 max speed
• DEWSD180072 – 4-1/2”, 75 max speed
• DEWSD180076 – 4-3/4”, 75 max speed
GENERAL SUPPLIES
• DEWSD180068 – 4-1/4”, 80 max speed
• DEWSD180088 – 5-1/2”, 60 max speed
• M3 steel vs M2 steel of the industry
standard product
SAFETY SUPPLIES
• Optimized tooth design for superior performance while cutting metal
• ThicK, hardened backing plate
• Versatility of deep-cut style
WORKWEAR
99
HOLE SAW ARBOR – LENS30005-5L
HOLE SAW EXTENSION – LENS30847
• 20L-96L hex shank
• 3/8” hex shank
• 12”
HOLE SAWS – LENS30010-10L
• 5/8”
• 3/4”
• 7/8”
• Added durability; thick backing
plate resists damage and
increases life
increases life
increases life
• Unique tooth configuration;
patented VARI-TOOTH design optimizes cutting for fast cuts and long tool life
patented VARI-TOOTH design
optimizes cutting for fast cuts
and long tool life
and long tool life
• 1”
• 1-1/16”
• 1-1/8”
increases life
increases life
increases life
and long tool life
and long tool life
and long tool life
• 1-3/16”
• 1-1/4”
• 1-3/4”
increases life
increases life
• Added durability; thick
backing plate resists damage and increases life
and long tool life
and long tool life
patented VARI-TOOTH
design optimizes cutting for
fast cuts and long tool life
• 1-13/16”
• 1-7/8”
• 2”
increases life
• Added durability; thick backing plate resists damage
and increases life
patented VARI-TOOTH
patented VARI-TOOTH
• 2-1/8”
• 2-1/4”
• 2-1/2”
backing plate resists
damage and increases life
• Added durability;
thick backing plate
resists damage and
increases life
• Added durability;
thick backing plate
resists damage and
increases life
• Unique tooth configuration; patented VARITOOTH design optimizes
cutting for fast cuts and long tool life
• Unique tooth configuration; patented VARITOOTH design optimizes cutting for fast cuts
and long tool life
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
HOLE SAW ARBOR – LENS30002-2L
MATERIAL HANDLING
HOLE SAWS
CONCRETE & MASONRY
LIGHT EQUIPMENT
100
Call us at: 8 00-6 6 9-778 8
• 2-3/4”
• 3”
• 3-1/2”
and long tool life
and long tool life
and long tool life
• 4”
• 4-1/2”
• 5”
and long tool life
and long tool life
HOLE SAWS – LENS30801-1200P
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HOLE SAWS
• 6”
BITS, BLADES
& ABRASIVES
• 4” 6 TPI u-shank fast/rough
wood cutting 5/pak
• 4” 6 TPI u-shank fast, clean
wood cutting 5/pak
• 4” 8 TPI u-shank HCS aluminum/fiberglass 5/pak
• Reinforced tooth design protects the teeth from damage
• Side chip path helps to quickly
remove debris and clear the
channel
channel
channel
• Fits DeWALT and other universal shank jigsaws
• Fits DeWALT and other
Universal shank jigsaws
JIG SAW BLADE – DEWSDW3710H
• 4” 10 TPI u-shank fine, smooth
wood cutting HCS 5/pak
• 4” 10 TPI u-shank downcutting
laminate wood HCS 5/pak
• 3” 12 TPI u-shank scroll wood
HCS 5/pak
• Side chip path helps to
quickly remove debris and
clear the channel
clear the channel
clear the channel
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
JIG SAW BLADES
WORKWEAR
101
JIG SAW BLADES
• 4” 6 TPI t-shank fast cut
wood cutting 5/pak
• 4” 6 TPI t-shank clean cut
wood cutting 5/pak
• 4” 8 TPI t-shank aluminum/fiberglass 5/pak
clear the channel
clear the channel
• Reinforced tooth design
protects the teeth from
damage
• T-shank design fits all
DeWALT and Bosch jig saws
• T-Shank design fits all DeWALT
and Bosch jig saws
• 4” 10 TPI t-shank fine
cut, smooth finish 5/pak
• 3” 12 TPI t-shank laminate
down cutting 5/pak
• 3” 12 TPI t-shank trim
coping 5/pak
damage
damage
damage
quickly remove debris
and clear the channel
clear the channel
JIG SAW BLADES-25 PC SET – DEWSDW3799
JIG SAW BLADES-METAL CUTTING –
DEWSDW3720-5
DEWSDW3724-5
• 3” 14 TPI u-Shank Thick
Metal Cutting Cobalt Steel
5/Pak
• 3” 18 TPI u-shank medium
metal cutting cobalt steel 5/pak
• 5 pieces of the most popular u-shank jig saw blades
• Curved tooth blades last up
to 2X longer than standard
blades
• Unique curved tooth design
minimizes stress points
Universal shank jig saws
• Durable plastic storage case
provides easy storage and
protection
DEWSDW3726-5
DEWSDW3770-5
DEWSDW3774-5
• 3” 24 TPI u-shank thin
metal cutting cobalt steel
5/pak
• 3” 14 TPI t-shank cobalt steel
5/pak
5/pak
and Bosch jig saws
and Bosch jig saws
• Cobalt steel (bi-metal) blades
minimize breakage
minimize breakage
• Cobalt steel (bi-metal)
blades minimize breakage
• Unique curved tooth
design minimizes stress
points
minimize breakage
• Cobalt steel (bi-metal) blades minimize
breakage
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
102
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
JIG SAW BLADES
DEWSDW3776-5
MATERIAL HANDLING
5/pak
• T-shank design fits all DeWALT
and Bosch jig saws
CONCRETE & MASONRY
minimize breakage
JIG SAW BLADES
REPLACEMENT BLADES – LENS20321-BT314J
POWER TOOLS
• 14 TPI bi-metal u shank 2/pak
• Thick metal cutting
• Greater precision - super sharp to cut fast
with deflection
BITS, BLADES
& ABRASIVES
• Smoother finish - ground to precision sharpness for straighter cuts and a smoother finish
• Ideal for woodworking - designed for optimal
performance in wood cutting, including hardwoods
• Shatter resistant - bi-metal technology flexes
and resists breaking
HAND TOOLS
RECIPROCATING
SAW BLADES
• 6 piece set
• 9” 6 TPI demolition blade 5/pak
• 9” 10 TPI demolition blade 5/pak
• Combo set provides a
selection of common
blades
• Thicker than standard blades
• Thicker than standard blades
• Wider blades add more stability
• Wider blades add more stability
• Reinforced teeth for increased
durability
• Reinforced teeth for increased
durability
• Specially formulated anti-stick
coating
coating
RECIPROCATING SAW BLADES-DRYWALL –
DEWSDW4851
RECIPROCATING SAW BLADES-METAL –
DEWSDW4807
DEWSDW4808
• 6” 6 TPI plaster cutting 5/pak
• 4” 14 TPI straight back
• V-shaped tooth for reduced
tearing
• Reinforced tooth design provides
coating
• Matrix II steel with 8% cobalt on
the cutting edge
the cutting edge
• Tough, flexible bi-metal design
coating
coating
• Vinyl pouch can
be carried in tool
carrying case
SAFETY SUPPLIES
RECIPROCATING SAW BLADE-DEMOLITION –
DEWSDW4865
GENERAL SUPPLIES
RECIPROCATING SAW BLADE-DEMOLITION –
DEWSDW4863
LANDSCAPING
RECIPROCATING SAW BLADE KIT –
DEWSDW4856
WORKWEAR
103
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
RECIPROCATING
SAW BLADES
DEWSDW4809
DEWSDW4811
DEWSDW4812
• Reinforced tooth design provides increased durability
the cutting edge
the cutting edge
• Matrix II steel with 8%
cobalt on the cutting edge
coating
coating
• Specially formulated antistick coating
DEWSDW4813
DEWSDW4821
RECIPROCATING SAW BLADES-WOOD –
DEWSDW4801
• 6” 3 TPI taper back 5/pak
• Reinforced tooth for
• Matrix II steel with 8%
cobalt on the cutting edge
the cutting edge
• +6 degree hook angle for
fast, aggressive cuts
• Specially formulated antistick coating
coating
• Anti-stick coating minimizes
friction and gum up
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Raker tooth design
104
DEWSDW4802
DEWSDW4803
DEWSDW4804
• Reinforced tooth for increased
durability
• +6 degree hook angle for fast,
aggressive cuts
friction and gum up
• Anti-stick coating minimizes friction and gum up
friction and gum up
DEWSDW4806
DEWSDW4845
DEWSDW4846
• 6” 10 TPI straight back 5/pak
• 6” 10/14 TPI Straight back 2/pak
• 8” 10/14 TPI straight back 2/pak
durability
durability
durability
aggressive cuts
aggressive cuts
aggressive cuts
friction and gum up
DEWSDW4847
DEWSDW4848
DEWSDW4849
• 6” 5/8 TPI taper back 5/pak
durability
durability
durability
aggressive cuts
aggressive cuts
aggressive cuts
friction and gum up
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
RECIPROCATING
SAW BLADES
• 6” 14 TPI 25/pak
• 6” 24 TPI 25/pak
• Nail embedded wood. Composition materials
& plastics, pipe, carbon steel, stainless steel
1/8”-1/4”, non ferrous metal 1/8”-1/2” thick
• Pipe, structural steel, stainless steel 3/32”1/4”, non ferrous metal 3/32”-3/8”
• All metals less than 1/8” thick, tubing, conduit,
trim
• Shatter resistant - bi-metal blades bend and
resist breaking and extend blade life
• Designed to attack - unique blade geometry
positions the blade for optimum cutting performance
• Long lasting - TUFF TOOTH design is reinforced to cut stronger and last longer
BI-METAL RECIPROCATING BLADES –
LENS20529-B618R
LENS20530-B656R
LENS20552-418R
• 6” 18 TPI 25/pak
• 6” 6 TPI 25/pak
• 4” 18 TPI 5/pak
• Structural steel, pipe, conduit, stainless steel
1/16”-3/16” thick, non ferrous metal 1/16”5/16”
• Fast cutting, roughing in work & nail embedded wood
LENS20566-618R
• 6” 10 TPI 5/pak
• 6” 14 TPI 5/pak
• 6” 18 TPI 5/pak
• Pipe, structural steel, stainless steel 3/32”1/4”, non ferrous metal 3/32”-3/8”
SAFETY SUPPLIES
GENERAL SUPPLIES
LENS20564-614R
LANDSCAPING
LENS20562-610R
HAND TOOLS
BITS, BLADES
& ABRASIVES
• 6” 10 TPI 25/pak
POWER TOOLS
LENS20496-B614R
CONCRETE & MASONRY
LENS20494-B614R
MATERIAL HANDLING
LENS20493-B610R
WORKWEAR
105
RECIPROCATING
SAW BLADES
LENS20568-624R
LENS20570-636RP
LENS20572-656R
• 6” 24 TPI 5/pak
• 6” 6 TPI 5/pak
• 6” 6 TPI 5/pak
• All metals less than 1/8” thick, tubing, conduit,
trim
• For plaster, plaster board & lath. Bi-directional
cutting
LENS20578-818R
LENS20580-810R
LENS20582-956R
• 8-3/4” 18 TPI 5/pak
• 8” 10 TPI 5/pak
• 9” 6 TPI 5/pak
LENS20585-156R
LENS20590-B810R
• 12” 6 TPI 5/pak
• 8” 10 TPI 25/pak
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
106
Call us at: 8 00-6 6 9-778 8
LIGHT EQUIPMENT
RECIPROCATING
SAW BLADES
SUPER SAWZALL BLADE – METS48-01-6188
SUPER SAWZALL BLADE – METS48-01-7037
MATERIAL HANDLING
• 6 TPI, 12” L
• 18 TPI, 9” L, 50/pak
• 1/2” universal tang fits all sawzalls
• 1/2” Universal tang fits all
sawzalls
• For very fast cutting in nail
embedded wood and general
roughing in work
CONCRETE & MASONRY
• For cutting metal 1/8” thru 3/16”, conduit,
tubing, channels and pipe
BIT TIPS
• Shock resistant tool
steel for longer life
• Hardened core for extra
strength and long life
• Snub nose design for ideal
fitment
• Snub nose design for
ideal fitment
• Heat treated to resist breakage and wear
• Advanced hardening process
provides maximum durability
• Advanced hardening
process provides maximum durability
BIT TIP-1” – DEWSDW2003
• #3 phillips
• #6 slotted
• #8 slotted
• Shock resistant tool steel for
longer life
longer life
longer life
fitment
• Snub nose design for ideal fitment
fitment
• #10 slotted
• #1 square recess
longer life
longer life
longer life
fitment
• Snub nose design for ideal fitment
fitment
• #1 phillips power bit
longer life
• Shock resistant tool for maximum durability
fitment
• Heat treated to resist breakage
and wear
• Extra strength magnet for
superior bit retention
SAFETY SUPPLIES
• #2 phillips
longer life
GENERAL SUPPLIES
• #1 phillips
• Shock resistant tool for
maximum durability
LANDSCAPING
• 3” magnetic
HAND TOOLS
BIT TIP-1” - DEWSDW2002
BITS, BLADES
& ABRASIVES
POWER TOOLS
BIT TIP HOLDER – DEWSDW2045
WORKWEAR
107
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
BIT TIPS
• #3 power bit
• 3/pak deck power bits
• #1 square recess power bit
maximum durability
maximum durability
maximum durability
• Heat treated to resist
breakage and wear
BIT TIP-3-1/2” – DEWSDW2032
maximum durability
maximum durability
BIT TIP-3-1/2” – DEWSDW2040
BIT TIP-DOUBLE ENDED – DEWSDW2024
• #10 slotted power bit
• #2 phillips, #8 slotted
maximum durability
maximum durability
• Double ended for extra versatility
BIT TIP-DOUBLE ENDED – DEWSDW2028
DRIVE GUIDE – DEWSDW2055
SCREWDRIVING SET-29 PC – DEWSDW2162
• #2 phillips, #2 phillips
• 6” magnetic
maximum durability
• Self retracting guide sleeve
protects fingers
• Includes heat treated bits for extra
durability
• Holds screws in place while
eliminating wobbling and
slipping
• Includes tough
Case for storage
durability
• Double ended for extra
versatility
TORX BIT SET-7 PC – DEWSDW2067
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• New!
108
Call us at: 8 00-6 6 9-778 8
POWER FASTENERS
TAPPER DRILL BIT – POWS02788
MATERIAL HANDLING
• 3/16” x 6-1/2”
• Used to install perma-seal tapper anchors
• Specific tolerance, which are gold or silver
colored
CONCRETE & MASONRY
BITS
VARI BITS – LENS30888-VB11
• 1/4”-3/4”
• 7/8”-1-1/8”
• Accurate, burr-free holesPatented two flute design cuts
fast, clean, round holes
• Accurate, burr-free holesPatented two flute design
cuts fast, clean, round
holes
• Starts on contact - split
point design for faster penetration and less walking
• Long tool life - steam oxide coating adds
durability. Enhanced flute design removes
chips rapidly, ensuring longer tool life
BITS, BLADES
& ABRASIVES
• Long tool life - steam oxide
coating adds durability.
Enhanced flute design removes chips rapidly,
ensuring longer tool life
POWER TOOLS
VARI BITS – LENS30883-VB3
• Starts on contact - split point
design for faster penetration
and less walking
LIGHT EQUIPMENT
BIT TIPS
SANDING DISCS
SANDING DISC – METS48-80-0689
• 36 grit 4-1/2”
• 60 grit 4-1/2”
• 80 grit 4-1/2”
• Alumina zirconia
• Dust pick up not available
• 36 grit 7”
• 80 grit 7”
LANDSCAPING
HAND TOOLS
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
109
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SDS BITS
SDS MAX CARBIDE TIPPED BIT
SDS PLUS CHISEL BIT
SDS PLUS ROCK CARBIDE
• DEWSDW5348 – 10” bull point chisel
• DEWSDW5401 – 5/32” x 4-1/2” x 6-1/2”
• DEWSDW5349 – 8” scaling chisel
• DEWSDW5402 – 3/16” x 2” x 4”
• DEWSDW5803 – 1/2” x 8” x 13-1/2”
• DEWSDW5350 – 10” cold chisel
• DEWSDW5403 – 3/16” x 4-1/2” x 6-1/2”
• DEWSDW5804 – 1/2” x 16” x 21-1/2”
• Hardened steel body for increased
durability
• DEWSDW5404 – 3/16” x 6-1/2” x 8-1/2”
• DEWSDW5806 – 5/8” x 8” x 13-1/2”
• DEWSDW5406 – 3/16” x 10 x 12”
• DEWSDW5808 – 11/16” x 16” x 21-1/2”
• DEWSDW5410 – 7/32” x 4” x 6”
• DEWSDW5810 – 3/4” x 8” x 13-1/2”
• DEWSDW5412 – 7/32” x 8” x 10”
• DEWSDW5416 – 1/4” x 2” x 4”
• DEWSDW5812 – 3/4” x 16” x 21-1/2”
SDS PLUS ROCK CARBIDE DRILL BIT SET –
DEWSDW5470
• DEWSDW5816 – 7/8” x 16” x 21-1/2”
• DEWSDW5818 – 1” x 8” x 13-1/2”
• 5 piece set
• DEWSDW5819 – 1” x 16” x 21-1/2”
• DEWSDW5821 – 1-1/8” x 10” x 15”
• Innovative tip design maximizes
carbide surface
• DEWSDW5824 – 1-1/4” x 10” x 15”
• Flour flute design
• DEWSDW5827 – 1-3/8” x 18” x 22-1/2”
• Optimized core diameter maximizes hammer energy
• DEWSDW5828 – 1-1/2” x 18” x 22-1/2”
• DEWSDW5417 – 1/4” x 4” x 6”
• DEWSDW5418 – 1/4” x 6-1/2” x 8-1/2”
• DEWSDW5420 – 1/4” x 10” x 12”
• DEWSDW5421 – 1/4” x 12” x 14”
• DEWSDW5424 – 5/16” x 4” x 6”
• DEWSDW5426 – 5/16” x 10” x 12”
• DEWSDW5427 – 3/8” x 4” x 6”
• DEWSDW5830 – 1-3/4” x 18” x 22-1/2”
• DEWSDW5430 – 3/8” x 10” x 12”
• DEWSDW5831 – 2” x 18” x 22-1/2”
• DEWSDW5431 – 3/8” x 16” x 18”
• Four cutter head design reduces vibration
• DEWSDW5432 – 3/8” x 22” x 24”
• Double flute removes material faster
• DEWSDW5433 – 7/16” x 4” x 6”
• Hardened core reduces bit breakage
• DEWSDW5437 – 1/2” x 4” x 6”
• DEWSDW5439 – 1/2” x 10” x 12”
SDS MAX STEELS-CHISEL
• DEWSDW5440 – 1/2” x 16” x 18”
• DEWSDW5442 – 9/16” x 4” x 6”
LANDSCAPING
HAND TOOLS
• DEWSDW5443 – 9/16” x 10” x 12”
• DEWSDW5446 – 5/8” x 6” x 8”
• DEWSDW5832 – 12” bull point
• DEWSDW5447 – 5/8” x 10” x 12”
• DEWSDW5448 – 5/8” x 16” x 18”
• DEWSDW5449 – 5/8” x 22” x 24”
other masonry
• DEWSDW5450 – 11/16” x 6” x 8”
SDS MAX STEELS-CHISEL
• DEWSDW5455 – 3/4” x 10” x 12”
• DEWSDW5453 – 3/4” x 6” x 8”
• DEWSDW5456 – 3/4” x 16” x 18”
• DEWSDW5460 – 7/8” x 6” x 8”
• DEWSDW5462 – 7/8” x 16” x 18”
• DEWSDW5834 – 1” x 12” cold
• DEWSDW5464 – 1” x 8” x 10”
• DEWSDW5835 – 1” x 18” cold
• DEWSDW5466 – 1” x 16” x 18”
• Flour flute design
other masonry
• Innovative tip design maximizes carbide surface contact
• Optimized core diameter maximizes hammer
energy
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• DEWSDW5461 – 7/8” x 10” x 12”
110
Call us at: 8 00-6 6 9-778 8
SPLINE CARBIDE TIPPED BITS (cont.)
SPLINE SHANK ADAPTER – DEWSDW5791
• DEWSDW5701 – 3/8” x 8” x 13”
• DEWSDW5765 – 1-3/8” x 17” x 22”
• DEWSDW5702 – 7/16” x 5” x 10”
• DEWSDW5768 – 1-3/4” x 17” x 22”
• Converts spline shank to
SDS adapter
• DEWSDW5703 – 1/2” x 5” x 10”
• DEWSDW5769 – 2” x 17” x 22”
• DEWSDW5704 – 1/2” x 11” x 16”
• Hardened core reduces breakage
• DEWSDW5705 – 1/2” x 17” x 22”
• DEWSDW5706 – 1/2” x 22” x 27”
• Concave head design allows dust to
enter flute chambers quickly
• DEWSDW5708 – 9/16” x 5” x 10”
• DEWSDW5709 – 5/8” x 5” x 10”
• DEWSDW5710 – 5/8” x 11” x 16”
SPLINE SHANK ADAPTER –
SPLINE SHANK CHISEL BIT
• DEWSDW5711 – 5/8” x 17” x 22”
• DEWSDW5712 – 5/8” x 22” x 27”
• DEWSDW5713 – 11/16” x 5” x 10”
• DEWSDW5715 – 3/4” x 11” x 16”
• DEWSDW5716 – 3/4” x 17” x 22”
• DEWSDW5793 – Converts spline shank to B
taper adapter
POWER TOOLS
• DEWSDW5714 – 3/4” x 5” x 10”
• DEWSDW5792 – Converts spline shank to A
taper adapter
CONCRETE & MASONRY
• DEWSDW5707 – 1/2” x 31” x 36”
MATERIAL HANDLING
SPLINE CARBIDE TIPPED BITS
LIGHT EQUIPMENT
SPLINE BITS
• DEWSDW5717 – 3/4” x 22” x 27”
• DEWSDW5719 – 7/8” x 11” x 16”
SPLINE SHANK CHISEL BIT – DEWSDW5772
• DEWSDW5721 – 1” x 11” x 16”
• DEWSDW5722 – 1” x 17” x 22”
• DEWSDW5723 – 1” x 31” x 36”
• DEWSDW5724 – 1-1/8” x 5” x 10”
• DEWSDW5725 – 1-1/8” x 11” x 16”
• 12” slotting
• 1-1/2” x 12” scaling
other masonry
• DEWSDW5727 – 1-1/4” x 11” x 16”
other masonry
SPLINE SHANK CHISEL BIT –
DEWSDW5775B10
• DEWSDW5732 – 1-1/2” x 17” x 22”
• DEWSDW5733 – 1-3/4” x 17” x 22”
• DEWSDW5734 – 2” x 17” x 22”
other masonry
other masonry
SPLINE SHANK CHISEL BIT
• DEWSDW5728 – 1-1/4” x 17” x 22”
HAND TOOLS
• DEWSDW5726 – 1-1/8” x 17” x 22”
BITS, BLADES
& ABRASIVES
• DEWSDW5720 – 7/8” x 17” x 22”
• DEWSDW5729 – 1-3/8” x 11” x 16”
• DEWSDW5730 – 1-3/8” x 17” x 22”
• DEWSDW5740 – 5/8” x 5” x 10”
• DEWSDW5742 – 5/8” x 17” x 22”
• DEWSDW5746 – 3/4” x 5” x 10”
• DEWSDW5779 – 1” x 12” cold
• DEWSDW5747 – 3/4” x 11” x 16”
• DEWSDW5780 – 1” x 18” cold
• DEWSDW5752 – 7/8” x 11” x 16”
• DEWSDW5753 – 7/8” x 17” x 22”
• Used on tile, mortar, glazing
compounds and other masonry
other masonry
• DEWSDW5759 – 1-1/8” x 17” x 22”
• DEWSDW5760 – 1-1/4” x 11” x 16”
• DEWSDW5761 – 1-1/4” x 17” x 22”
SAFETY SUPPLIES
• DEWSDW5756 – 1” x 17” x 22”
• 3/4” ground rod driver
GENERAL SUPPLIES
• DEWSDW5741 – 5/8” x 11” x 16”
LANDSCAPING
• DEWSDW5731 – 1-1/2” x 11” x 16”
• DEWSDW5764 – 1-1/2” x 17” x 22”
• Hardened core reduces breakage
• Concave head design allows dust to enter flute
chambers quickly
WORKWEAR
111
SPLINE BITS
• 4-1/2” clay spade
other masonry
NUT DRIVERS
NUT DRIVER-MAGNETIC – DEWSDW2218
• 1/4” x 1-7/8”
• 5/16” x 1-7/8”
• 1/4” x 2-9/16”
• Patented geometry reduces
rounding of the hex
rounding of the hex
rounding of the hex
• Advanced hardening process provides maximum durability
• Advanced hardening process provides maximum durability
• Extra strength magnets provide
strong bit retention
• 5/16” x 2-9/16”
• 3/8” x 2-9/16”
rounding of the hex
rounding of the hex
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
112
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
3/8” DR FLEXIBLE SOCKET EXTENSION/
DRIVER – PTOS5268
3/8” DR SOCKET HINGE HANDLE – PTOS5265
• 9-1/8” in length
3/8” DR UNIVERSAL SOCKET JOINT –
PTOS5270
MATERIAL HANDLING
3/8” DR FLEXIBLE SOCKET DRIVER –
PTOS5267
LIGHT EQUIPMENT
3/8” DRIVE
CONCRETE & MASONRY
3/8” DR SOCKET ADAPTER
POWER TOOLS
3/8” DRIVE ADAPTERS
• PTOS5255 – 3/8” F x 1/4” M
3/8” DRIVE EXTENSIONS
• PTOS5259 – 1-3/4” in length
• PTOS5259W – 1-3/4” in length
• PTOS5260 – 3” in length
• PTOS5260-06W – 6” in length
• PTOS5260-06 – 6” in length
• PTOS5260W – 3” in length
• PTOS5263 – 17-3/16” in length
• Provides up to a 17 degree angle of operation
3/8” DR SLIDING T HANDLE – PTOS5285
3/8” DR SPEED HANDLE – PTOS5280
GENERAL SUPPLIES
3/8” DRIVE HANDLES
LANDSCAPING
3/8” DR WOBBLE SOCKET EXTENSION
HAND TOOLS
3/8” DR SOCKET EXTENSION
BITS, BLADES
& ABRASIVES
• PTOS5256 – 1/4” F x 3/8” M
• 8” in length
• 17” in length
SAFETY SUPPLIES
WORKWEAR
113
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
3/8” DRIVE IMPACT
SOCKET SETS
3/8” DR 13 PC HAND IMPACT DRIVER SET –
PTOS7099A
3/8” DR & 1/2” DR 10PC HEX BIT IMPACT
SOCKET SET – PTOS72156
3/8” DR & 1/2” DR 7PC HEX BIT IMPACT
SOCKET SET – PTOS72152
• Designed to loosen hard
to turn bolts and nuts
• 3/8” dr & 1/2” dr
• 3/8” dr & 1/2” dr
• Tight nut tolerances
• Heavy-duty spring for
added torque
• Special heat treated
alloy steel
alloy steel
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• Interchangeable bits
• Straight center line for
ultimate concentricity
3/8” DRIVE
IMPACT SOCKETS
1/2” DR IMPACT SOCKET EXTENSION –
PTOS7184P
1/2” DR IMPACT SOCKET EXTENSION
• PTOS7710H - 5/16”
• PTOS7180P - 2”
• 9”
• PTOS7181P - 5”
• One piece construction ensures concentricity
• PTOS7182P - 3”
• PTOS7183-00 - 10”
• Special heat treated alloy steel
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• PTOS7712H - 3/8”
• PTOS7714H - 7/16”
• PTOS7716H - 1/2”
• PTOS7718H - 9/16”
• PTOS7720H - 5/8”
• PTOS7722H - 11/16”
• Concentric openings
• Precision machined tips for proper fastener
engagement
• Large clearance holes
3/8” DR 6 PT DEEP IMPACT SOCKET –
PTOS7724H
3/8” DR 6 PT DEEP METRIC IMPACT SOCKET
3/8” DR 6 PT STANDARD IMPACT SOCKET
• 3/8”
• PTOS7009M – 9mm
• PTOS7208H – 1/4”
• PTOS7010M – 10mm
• PTOS7210H – 5/16”
• PTOS7011M – 11mm
• PTOS7211H – 11/32”
• Large knurl and power threads
• PTOS7012M – 12mm
• PTOS7212H – 3/8”
• PTOS7013M – 13mm
• PTOS7214H – 7/16”
• PTOS7014M – 14mm
• PTOS7216H – 1/2”
• PTOS7015M – 15mm
• PTOS7218H – 9/16”
• PTOS7220H – 5/8”
• PTOS7222H – 11/16”
• PTOS7224H – 3/4”
WORKWEAR
SAFETY SUPPLIES
3/8” DR 6 PT DEEP IMPACT SOCKET
114
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
3/8” DRIVE
IMPACT SOCKETS
3/8” DR PINLESS UNIVERSAL JOINT –
PTOS7270P
• Patented pinless design
• PTOS7175P – 3”
• PTOS7210M – 10mm
• PTOS7176P – 6”
• PTOS7211M – 11mm
• Constructed of high quality tool steel
• PTOS7212M – 12mm
• PTOS7213M – 13mm
• Straight center line for ultimate concentricity
CONCRETE & MASONRY
MATERIAL HANDLING
3/8” DR 6 PT STANDARD METRIC IMPACT
SOCKET
• PTOS7214M – 14mm
• PTOS7215M – 15mm
• PTOS7217M – 17mm
POWER TOOLS
3/8” DR BIG DAWG PEAR HEAD RATCHET
BLACK – PTOS5249PBL
3/8” DR FLEX HEAD INDEXABLE RATCHET –
PTOS5257FL
• 6.8 degree arc swing
• Nine tooth contact with the gear
• Nine tooth contact with the gear
• 7 new flex head angles
• Knurled chrome handle
• Reduced head dimensions
HAND TOOLS
3/8” DR BIG DAWG PEAR HEAD RATCHET –
PTOS5249P
BITS, BLADES
& ABRASIVES
3/8” DRIVE RATCHETS
• High quality alloy ratchet gear
3/8” DR MINI PEAR HEAD RATCHET –
PTOS5248S
• Unique 24 tooth gear floating pawl design
• 180 degree flex, 4 degree ratcheting angle
• Thin head design for access into tight
work areas
• Special quality alloy steel
• 15 degree ratcheting angle
work areas
• Reversing lever designed for quick, one-hand
operation
• Comfort grip handle
• Unique 24 tooth gear floating pawl design
• Patented push button release
• Sealed transfer case prevents dirt and debris
from penetrating
GENERAL SUPPLIES
3/8” DR ROUND FLEX HEAD RATCHET –
PTOS5257A
LANDSCAPING
3/8” DR PEAR HEAD RATCHET – PTOS5250
3/8” DR ROUND HEAD RATCHET – PTOS5252A
SAFETY SUPPLIES
• Patented push button release and hand turned
speeder ring
WORKWEAR
• Double pawl mechanism doubles the action of
the teeth
115
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
3/8” DRIVE SOCKET SETS
3/8” DR 12 PT 29 PC METRIC SOCKET SET –
PTOS52222
3/8” DR 6 PT 12 PC SOCKET SET –
PTOS52128
PTOS52134
• 8mm-19mm sockets
• 3/8” thru 7/8” sockets
• 3/8” thru 7/8” sockets
• 8mm-19mm deep
sockets
• 3” & 6” extensions
• 3/8” thru 7/8” deep
sockets
• 3/8” drive ratchet
• Accessories
• Accessories
3/8” DRIVE SOCKETS
3/8” DR 12 PT DEEP HAND SOCKET
3/8” DR 12 PT DEEP METRIC HAND SOCKET
3/8” DR 12 PT METRIC STANDARD HAND
SOCKET
• PTOS5008 – 1/4”
• PTOS5010 – 5/16”
• PTOS5010M – 10mm
• PTOS5012 – 3/8”
• PTOS5011M – 11mm
• PTOS5210M – 10mm
• PTOS5014 – 7/16”
• PTOS5012M – 12mm
• PTOS5211M – 11mm
• PTOS5016 – 1/2”
• PTOS5013M – 13mm
• PTOS5212M – 12mm
• PTOS5018 – 9/16”
• PTOS5014M – 14mm
• PTOS5213M – 13mm
• PTOS5020 – 5/8”
• PTOS5015M – 15mm
• PTOS5214M – 14mm
• PTOS5022 – 11/16”
• PTOS5017M – 17mm
• PTOS5215M – 15mm
• PTOS5024 – 3/4”
• PTOS5019M – 19mm
• PTOS5216M – 16mm
• PTOS5026 – 13/16”
• TORQUEPLUS design allows more torque
• PTOS5217M – 17mm
• PTOS5028 – 7/8”
• Black oxide finish
• PTOS5218M – 18mm
• PTOS5030 – 15/16”
• PTOS5219M – 19mm
• PTOS5032 – 1”
• PTOS5220M – 20mm
• PTOS5221M – 21mm
• PTOS5222M – 22mm
3/8” DR 12 PT METRIC UNIVERSAL HAND
SOCKET
3/8” DR 12 PT STANDARD HAND SOCKET
3/8” DR 12 PT UNIVERSAL HAND SOCKET
• PTOS5208 – 1/4”
• PTOS5273 – 3/8”
• PTOS5273M – 10mm
• PTOS5210 – 5/16”
• PTOS5274 – 7/16”
• PTOS5274M – 11mm
• PTOS5212 – 3/8”
• PTOS5275 – 1/2”
• PTOS5275M – 12mm
• PTOS5214 – 7/16”
• PTOS5276 – 9/16”
• PTOS5276M – 13mm
• PTOS5216 – 1/2”
• PTOS5277 – 5/8”
• PTOS5277M – 14mm
• PTOS5218 – 9/16”
• PTOS5278 – 11/16”
• PTOS5278M – 15mm
• PTOS5220 – 5/8”
• PTOS5279 – 3/4”
• PTOS5222 – 11/16”
• PTOS5224 – 3/4”
• PTOS5226 – 13/16”
• PTOS5230 – 15/16”
• PTOS5232 – 1”
WORKWEAR
SAFETY SUPPLIES
• PTOS5228 – 7/8”
116
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
• PTOS5008H – 1/4”
• PTOS5028H – 7/8”
• PTOS5208H – 1/4”
• PTOS5010H – 5/16”
• PTOS5032H – 1”
• PTOS5210H – 5/16”
• PTOS5012H – 3/8”
• TORQUEPLUS design allows
more torque
• PTOS5214H – 7/16”
• PTOS5014H – 7/16”
• PTOS5016H – 1/2”
• PTOS5218H – 9/16”
• PTOS5216H – 1/2”
• PTOS5220H – 5/8”
• PTOS5020H – 5/8”
• PTOS5222H – 11/16”
• PTOS5022H – 11/16”
• PTOS5224H – 3/4”
• PTOS5024H – 3/4”
• PTOS5232H – 1”
• PTOS5026H – 13/16”
• PTOS5030H – 15/16”
POWER TOOLS
1/2” DR ADAPTER – PTOS5453
CONCRETE & MASONRY
• PTOS5018H – 9/16”
MATERIAL HANDLING
LIGHT EQUIPMENT
1/2” DR SOCKET ADAPTER
• 3/4” F x 1/2” M
BITS, BLADES
& ABRASIVES
• PTOS5253 – 3/8” F x 1/2” M
• PTOS5254 – 1/2” F x 3/8” M
1/2” DR SOCKET EXTENSION
HAND TOOLS
1/2” DR WOBBLE SOCKET EXTENSION
• PTOS5460 – 2-1/2” in length
LANDSCAPING
• Provides up to a 17 degree
angle of operation
• Gives access to fasteners in areas otherwise
impossible to reach
• 12-15/16” in length
SAFETY SUPPLIES
GENERAL SUPPLIES
WORKWEAR
117
1/2” DR SOCKET SPEED HANDLE – PTOS5480
• 18” in length
1/2” DRIVE HEX BITS
1/2” DR EXTRA LONG METRIC HEX BIT
1/2” DR EXTRA LONG HEX BIT
1/2” DR HEX BIT
• PTOS5441-3/8XL – 3/8”
• PTOS5441-1/2 – 1/2”
• PTOS5441-5/8XL – 5/8”
• PTOS5441-1/4 – 1/4”
• Two piece design allows
replacement of worn bits
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
• PTOS5441-12MXL – 12mm
• PTOS5441-3/4 – 3/4”
• PTOS5441-17MXL – 17mm
• PTOS5441-3/8 – 3/8”
• Two piece design allows replacement of worn
bits
• PTOS5441-5/16 – 5/16”
• PTOS5441-5/8 – 5/8”
• PTOS5441-7/16 – 7/16”
• Two piece design allows replacement of
worn bits
BITS, BLADES
& ABRASIVES
1/2” DR METRIC HEX BIT
• PTOS5441-10M – 10mm
• PTOS5441-14M – 14mm
• PTOS5441-6M – 6mm
HAND TOOLS
• Two piece design allows
replacement of worn bits
1/2” DRIVE HEX BITS SETS
• 1/4” thru 5/8”
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
1/2” DR 7 PC HEX BIT SET – PTOS5441-7
118
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
1/2” DRIVE IMPACT
SOCKET SETS
1/2” DR 6 PT 7 PC SET UNIVERSAL IMPACT
SOCKET SET - PTOS74142
• 6-1/4” and 17” socket bars
• 9” socket bar
POWER TOOLS
1/2” DRIVE
IMPACT SOCKETS
1/2” DR 6 PT IMPACT SOCKET UNIVERSAL
JOINT – PTOS7480P
• PTOS7312H – 3/8”
• PTOS7470P – 2-15/16”
• 13/16”
• PTOS7314H – 7/16”
• PTOS7474P – 7/16”
• PTOS7316H – 1/2”
• PTOS7475P – 1/2”
• PTOS7318H – 9/16”
• PTOS7476P – 9/16”
• Knurled shank provides
non-slip grip
• PTOS7320H – 5/8”
• PTOS7477P – 5/8”
• PTOS7322H – 11/16”
• PTOS7478P – 11/16”
• PTOS7324H – 3/4”
• PTOS7479P – 3/4”
• PTOS7326H – 13/16”
• PTOS7330H – 15/16”
• PTOS7332H – 1”
• PTOS7336H – 1-1/8”
• PTOS7340H – 1-1/4”
• PTOS7348H – 1-1/2”
• PTOS7412H – 3/8”
• PTOS7414H – 7/16”
• PTOS7410M – 10mm
• PTOS7416H – 1/2”
• PTOS7411M – 11mm
• PTOS7418H – 9/16”
• PTOS7412M – 12mm
• PTOS7420H – 5/8”
• PTOS7413M – 13mm
• PTOS7422H – 11/16”
• PTOS7414M – 14mm
• PTOS7424H – 3/4”
• PTOS7415M – 15mm
• PTOS7426H – 13/16”
• PTOS7416M – 16mm
• PTOS7428H – 7/8”
• PTOS7417M – 17mm
• PTOS7430H – 15/16”
• PTOS7418M – 18mm
• PTOS7432H – 1”
• PTOS7419M – 19mm
• PTOS7434H – 1-1/16”
• PTOS7436H – 1-1/8”
• PTOS7438H – 1-3/16”
SAFETY SUPPLIES
1/2” DR 6 PT STANDARD IMPACT SOCKET
GENERAL SUPPLIES
1/2” DR 6 PT METRIC STANDARD IMPACT
SOCKET
LANDSCAPING
• PTOS7334H – 1-1/16”
HAND TOOLS
1/2” DR 6 PT IMPACT SOCKET UNIVERSAL
JOINT
BITS, BLADES
& ABRASIVES
1/2” DR 6 PT DEEP IMPACT SOCKET
• PTOS7328H – 7/8”
CONCRETE & MASONRY
1/2” DR 6 PT 15 PC DEEP IMPACT SOCKET
SET – PTOS74114
MATERIAL HANDLING
1/2” DR 6 PT 15 PC DEEP IMPACT SOCKET
SET – PTOS74104
WORKWEAR
119
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
1/2” DRIVE
IMPACT SOCKETS
1/2” DR 6 PT STANDARD IMPACT SOCKET –
PTOS7440H
1/2” DR 6PT DEEP METRIC IMPACT SOCKET
1/2” DR 7 PC HEX BIT IMPACT SOCKET SET –
PTOS74152
• 1-1/4”
• PTOS7310M – 10mm
alloy steel
• PTOS7312M – 12mm
• PTOS7313M – 13mm
• PTOS7314M – 14mm
1/2” DR IMPACT SOCKET ADAPTER –
PTOS7652
• 1/2” F x 3/4” M
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• PTOS7311M – 11mm
• PTOS7315M – 15mm
PTOS7653
• PTOS7316M – 16mm
• 3/4” F x 1/2” M
• PTOS7317M – 17mm
• PTOS7318M – 18mm
• PTOS7319M – 19mm
• PTOS7321M – 21mm
• PTOS7322M – 22mm
1/2” DR LOCKING IMPACT EXTENSION –
PTOS7503
• PTOS7324M – 24mm
• PTOS7325M – 25mm
PTOS7505
• 3”
• PTOS7326M – 26mm
• 5”
• Solid one piece design
• PTOS7328M – 28mm
• Patented locking feature locks
sockets to the extension
• PTOS7329M – 29mm
• PTOS7330M – 30mm
• Patented locking feature locks sockets
to the extension
• Knurled shank provides non-slip grip
• PTOS7332M – 32mm
• Knurled shank provides non-slip grip
HAND TOOLS
• PTOS7336M – 36mm
PTOS7510
• 10”
• Patented locking feature
locks sockets to the
extension
• Knurled shank provides
non-slip grip
PTOS7515
• 15”
• Patented locking feature locks sockets to the
extension
PTOS7651
• 1/2” F x 3/8” M
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
120
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
1/2” DR BIG DAWG PEAR HEAD RATCHET PTOS5449P
1/2” DR FLEX HEAD RATCHET – PTOS5457A
• 180 degree flex, 4 degree ratcheting angle
• High quality alloy steel
• 13% smaller head for access in tight
work areas
• Permits socket turning when the ratchet is at
an angle
• Nine tooth contact with
the gear
• Reversing lever
designed for quick, one
hand operation
1/2” DR LONG HANDLE ROUND HEAD RATCHET – PTOS5454A
1/2” DR PEAR HEAD SPUD HANDLE RATCHET
- PTOS5449-14BL
• Unique floating pawl design
• Long handle for added leverage
speeder ring
• Pear head
• PROTOBLACK black oxide finish
the teeth
• Tapered handle for aligning bolt holes
POWER TOOLS
1/2” DR LONG HANDLE PEAR HEAD RATCHET
– PTOS5450P
CONCRETE & MASONRY
• Hole in ratchet handle to be used with
tether strap
MATERIAL HANDLING
1/2” DR BIG DAWG PEAR HEAD RATCHET
BLACK - PTOS5449PBL
LIGHT EQUIPMENT
• Diamond knurled handle
1/2” DR SCAFFOLD RATCHET – PTOS5449SC
BITS, BLADES
& ABRASIVES
1/2” DR ROUND HEAD RATCHET - PTOS5452A
• Designed for working with
scaffolding
speeder ring
the teeth
• Hammer tip reduces vibration
• Thin head design for access
into tight work areas
HAND TOOLS
• Socket retained with through
hole and pin for safety
• Reversing lever designed for
quick, one hand operation
1/2” DR 12 PT METRIC STANDARD HAND
SOCKET
• PTOS5312 – 3/8”
• PTOS5316M – 16mm
• PTOS5314 – 7/16”
• PTOS5317M – 17mm
• PTOS5425M – 25mm
• PTOS5316 – 1/2”
• PTOS5318M – 18mm
• PTOS5426M – 26mm
• PTOS5318 – 9/16”
• PTOS5319M – 19mm
• PTOS5427M – 27mm
• PTOS5320 – 5/8”
• PTOS5320M – 20mm
• PTOS5428M – 28mm
• PTOS5322 – 11/16”
• PTOS5321M – 21mm
• PTOS5429M – 29mm
• PTOS5324 – 3/4”
• PTOS5322M – 22mm
• PTOS5436M – 36mm
• PTOS5326 – 13/16”
• PTOS5324M – 24mm
• PTOS5328 – 7/8”
• PTOS5325M – 25mm
• PTOS5330 – 15/16”
• PTOS5326M – 26mm
• PTOS5332 – 1”
• PTOS5334 – 1-1/16”
SAFETY SUPPLIES
1/2” DR 12 PT DEEP METRIC HAND SOCKET
GENERAL SUPPLIES
LANDSCAPING
• PTOS5336 – 1-1/8”
• PTOS5338 – 1-3/16”
• PTOS5342 – 1-5/16”
• PTOS5348 – 1-1/2”
WORKWEAR
• PTOS5340 – 1-1/4”
121
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
1/2” DR 12 PT UNIVERSAL HAND SOCKET –
PTOS5475
PTOS5476
• PTOS5425 – 25/32”
• PTOS5426 – 13/16”
more torque
• TORQUEPLUS design
allows more torque
PTOS5477
• PTOS5312H – 3/8”
• PTOS5426H – 13/16”
more torque
• PTOS5314H – 7/16”
• PTOS5428H – 7/8”
• PTOS5316H – 1/2”
• PTOS5434H – 1-1/16”
• PTOS5318H – 9/16”
• PTOS5436H – 1-1/8”
• PTOS5320H – 5/8”
• PTOS5440H – 1-1/4”
• PTOS5322H – 11/16”
• TORQUEPLUS design
allows more torque
• PTOS5428 – 7/8”
• PTOS5429 – 29/32”
• PTOS5430 – 15/16”
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• PTOS5436 – 1-1/8”
• PTOS5438 – 1-3/16”
• PTOS5324H – 3/4”
PTOS5470
• PTOS5326H – 13/16”
• PTOS5328H – 7/8”
• PTOS5330H – 15/16”
• PTOS5332H – 1”
• PTOS5334H – 1-1/16”
• PTOS5336H – 1-1/8”
HAND TOOLS
• PTOS5338H – 1-3/16”
• PTOS5340H – 1-1/4”
• PTOS5342H – 1-5/16”
• PTOS5348H – 1-1/2”
1/2” DR SOCKET ADAPTER – PTOS5653
3/4” DR SOCKET ADAPTER – PTOS5853
• 1/2” F x 3/4” M
• 3/4” F x 1” M
• Reversing lever designed for
quick, one hand operation
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
122
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
3/4” DR HAND EXTENSION
MATERIAL HANDLING
• PTOS5660 – 4”
• PTOS5661 – 8”
• PTOS5663 – 16”
• Gives access to fasteners in areas otherwise
impossible to reach
• 16” in length
• 18” in length
• 20” in length
1” DR IMPACT SOCKET ADAPTER
3/4” DR IMPACT SOCKET HEX BIT –
PTOS075901
• PTOS07655 – 3/4” F x 1” M
• 1”
• PTOS07656 – 3/4” M x 1” F
• 5-13/16” socket length
• 2-11/16” bit length
HAND TOOLS
• PTOS07567 – 7”
BITS, BLADES
& ABRASIVES
3/4” DRIVE
IMPACT SOCKETS
POWER TOOLS
3/4” DR ELL SOCKET HANDLE – PTOS5686
CONCRETE & MASONRY
• PTOS07568 – 10”
• PTOS07569 – 13”
• Precision machined tips
• 3/4”
• 5/8”
• 7/8”
PTOS075909/16
3/4” DR IMPACT SOCKET O-RING –
PTOS07500R
3/4” DR IMPACT SOCKET RETAINING PIN –
PTOS07500P
• 9/16”
• Fits all 3/4” drive impact
sockets and attachments
• Tight nut end tolerances
• Heat treated high
alloy steel
• Fits all 3/4” drive impact sockets and
attachments
SAFETY SUPPLIES
PTOS075907/8
GENERAL SUPPLIES
PTOS075905/8
LANDSCAPING
PTOS075903/4
WORKWEAR
123
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
3/4” DRIVE
IMPACT SOCKETS
3/4” DR IMPACT SOCKET UNIVERSAL JOINT –
PTOS07570
3/4” DR 6-POINT DEEP LENGTH IMPACT
SOCKET
3/4” DR 6-POINT STANDARD LENGTH IMPACT
SOCKET
• 4-3/4”
• PTOS07509L – 9/16”
• PTOS07509 – 9/16”
• PTOS07510L – 5/8”
• PTOS07510 – 5/8”
• PTOS07511L – 11/16”
• PTOS07511 – 11/16”
• PTOS07512L – 3/4”
• PTOS07512 – 3/4”
• PTOS07513L – 13/16”
• PTOS07513 – 13/16”
• PTOS07514L – 7/8”
• PTOS07514 – 7/8”
3/4” DR RET RING IMPACT SOCKET RETAINER
– PTOS07500-0
• PTOS07515L – 15/16”
• PTOS07515 – 15/16”
• PTOS07516L – 1”
• PTOS07516 – 1”
• Hub diameter of 1.63”
and a groove diameter
of 1.50”
• PTOS07517L – 1-1/16”
• PTOS07517 – 1-1/16”
• PTOS07518L – 1-1/8”
• PTOS07518 – 1-1/8”
• PTOS07519L – 1-3/16”
• PTOS07519 – 1-3/16”
• PTOS07520L – 1-1/4”
• PTOS07520 – 1-1/4”
• PTOS07521L – 1-5/16”
• PTOS07521 – 1-5/16”
• PTOS07522L – 1-3/8”
• PTOS07522 – 1-3/8”
• PTOS07523L – 1-7/16”
• PTOS07523 – 1-7/16”
• PTOS07524L – 1-1/2”
• PTOS07524 – 1-1/2”
• PTOS07525L – 1-9/16”
• PTOS07525 – 1-9/16”
• PTOS07526L – 1-5/8”
• PTOS07526 – 1-5/8”
• PTOS07527L – 1-11/16”
• PTOS07527 – 1-11/16”
• PTOS07528L – 1-3/4”
• PTOS07528 – 1-3/4”
• Holds impact socket
onto an impact wrench
when rotating at
high speeds
• PTOS07529 – 1-13/16”
• PTOS07530 – 1-7/8”
• PTOS07531 – 1-15/16”
• Steel insert designed to provide
additional security
• Heat treated high alloy steel
• PTOS07532 – 2”
• Holds impact socket
onto an impact wrench
when rotating at
high speeds
HAND TOOLS
BITS, BLADES
& ABRASIVES
additional security
3/4” DR RET RING IMPACT SOCKET RETAINER
– PTOS07500-1
• Hub diameter of 1.75”
and a groove diameter
of 1.625”
• PTOS07533 – 2-1/16”
• PTOS07534 – 2-1/8”
LANDSCAPING
• PTOS07535 – 2-3/16”
• PTOS07536 – 2-1/4”
• PTOS07538 – 2-3/8”
GENERAL SUPPLIES
SAFETY SUPPLIES
3/4” DR PEAR HEAD RATCHET – PTOS5649
• Unique floating pawl design
WORKWEAR
work areas
124
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
3/4” DRIVE SOCKET SETS
PTOS55102
MATERIAL HANDLING
• Sockets 7/8” thru 2”
• Accessories
PTOS5670
• PTOS5524 – 3/4”
• PTOS5528HL – 7/8”
• 3-39/64”
• PTOS5526 – 13/16”
• PTOS5530HL – 15/16”
• PTOS5530 – 15/16”
• PTOS5532HL – 1”
• PTOS5532 – 1”
• PTOS5534HL – 1-1/16”
• PTOS5534 – 1-1/16”
• PTOS5536HL – 1-1/8”
• PTOS5536 – 1-1/8”
• PTOS5540HL – 1-1/4”
• PTOS5538 – 1-3/16”
• PTOS5542HL – 1-5/16”
• PTOS5540 – 1-1/4”
• PTOS5544HL – 1-3/8”
• PTOS5542 – 1-5/16”
• PTOS5546HL – 1-7/16”
• PTOS5544 – 1-3/8”
• PTOS5548HL – 1-1/2”
• PTOS5546 – 1-7/16”
• PTOS5552HL – 1-5/8”
• PTOS5548 – 1-3/8”
• PTOS5552 – 1-5/8”
• PTOS5554 – 1-11/16”
HAND TOOLS
• PTOS5550 – 1-9/16”
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• PTOS5558 – 1-13/16”
• PTOS5560 – 1-7/8”
• PTOS5564 – 2”
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
125
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
1” DRIVE IMPACT SOCKETS
1” DR 6 POINT STANDARD LENGTH IMPACT
SOCKET
1” DR 6 POINT DEEP LENGTH IMPACT
SOCKET
“O” RING FOR IMPACT SOCKETS AND
ATTACHMENTS
• PTOS10012 – 3/4”
• PTOS10014L – 7/8”
• PTOS10000R1 – 2” OD
• PTOS10014 – 7/8”
• PTOS10016L – 1”
• PTOS10016 – 1”
• PTOS10017L – 1-1/16”
• PTOS10000R2 –
2-1/4” OD
• PTOS10017 – 1-1/16”
• PTOS10018L – 1-1/8”
• PTOS10018 – 1-1/8”
• PTOS10019L – 1-3/16”
• PTOS10019 – 1-3/16”
• PTOS10020L – 1-1/4”
• PTOS10020 – 1-1/4”
• PTOS10021L – 1-5/16”
• PTOS10607 – 7”
• PTOS10021 – 1-5/16”
• PTOS10022L – 1-3/8”
• PTOS10608 – 10”
• PTOS10022 – 1-3/8”
• PTOS10023L – 1-7/16”
• PTOS10023 – 1-7/16”
• PTOS10024L – 1-1/2”
• One piece construction
ensures concentricity
• PTOS10024 – 1-1/2”
• PTOS10026L – 1-5/8”
• PTOS10025 – 1-9/16”
• PTOS10027L – 1-11/16”
• PTOS10026 – 1-5/8”
• PTOS10028L – 1-3/4”
• PTOS10027 – 1-11/16”
• PTOS10029L – 1-3/16”
• PTOS10028 – 1-3/4”
• PTOS10031L – 1-15/16”
• 13”
• PTOS10029 – 1-3/16”
• PTOS10032L – 2”
• PTOS10030 – 1-7/8”
• PTOS10033L – 2-1/16”
• One piece construction
ensures concentricity
• PTOS10031 – 1-15/16”
• PTOS10034L – 2-1/8”
• PTOS10032 – 2”
• PTOS10035L – 2-3/16”
• PTOS10033 – 2-1/16”
• PTOS10036L – 2-1/4”
• PTOS10034 – 2-1/8”
• PTOS10037L – 2-5/16”
• PTOS10035 – 2-3/16”
• PTOS10038L – 2-3/8”
• PTOS10036 – 2-1/4”
• PTOS10037 – 2-5/16”
• PTOS10038 – 2-3/8”
• PTOS10039 – 2-7/16”
• PTOS10040 – 2-1/2”
• PTOS10041 – 2-9/16”
1” DR IMPACT SOCKET EXTENSION
• Precision machined tips
1” DR IMPACT SOCKET EXTENSION –
PTOS10609
1” DR IMPACT SOCKET RETAINING PIN
• PTOS10000P1 – 1-7/8”
• PTOS10000P2 – 2-1/8”
1” DR IMPACT SOCKET UNIVERSAL JOINT –
PTOS10670
• 5-3/8”
LANDSCAPING
• PTOS10042 – 2-5/8”
• PTOS10043 – 2-11/16”
• PTOS10044 – 2-3/4”
• PTOS10045 – 2-13/16”
• PTOS10046 – 2-7/8”
GENERAL SUPPLIES
• PTOS10047 – 2-15/16”
• PTOS10048 – 3”
• PTOS10050 – 3-1/8”
• PTOS10052 – 3-1/4”
• PTOS10054 – 3-3/8”
WORKWEAR
SAFETY SUPPLIES
126
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
1” DRIVE SOCKETS
1” DR RET RING SOCKET RETAINER
MATERIAL HANDLING
• PTOS10000-1 –
2.13” hub diameter,
1.937” groove diameter
• PTOS10000-2 –
2.38” hub diameter,
2.19” groove diameter
• PTOS10000-3 – 1.75” groove diameter
• PTOS10000-4 – 2.50” groove diameter
CONCRETE & MASONRY
• Holds impact socket onto an impact wrench
when rotating at high speeds
additional security
BOX KNIVES
7” HANDLE SWIVEL-LOCK RETRACTABLE
UTILITY KNIFE – STNS10989
SINGLE EDGE RAZOR BLADES – STNS28510
• 10 pack
• Classic 99
• Multi-position blade slide
• Handle swivels open for quick, easy blade
changes; no need for a screwdriver
• Blade storage in handle
• Interlocking nose secures knife halves
together to prevent spreading
• Furnished with three 11921 heavy-duty
utility blades
• Aluminum body for lighter weight
HAND TOOLS
• Large, comfortable handle design allows for
extended use
BITS, BLADES
& ABRASIVES
• Interlocking nose to hold blade securely
• Steel-backed high
carbon steel blade fits
all standard razor
blade tools
POWER TOOLS
6” RETRACTABLE UTILITY KNIFE –
STNS10099
• Furnished with three 11921 heavy-duty
utility blades
BOX KNIVES
• Durable ballistic nylon
• Will hold the original
SuperKnife, 2 in 1 tools
and 2 replacement blades
SUPERKNIFE REPLACEMENT BLADES –
SPMS918
SUPERKNIFE SK2
• 6 pack replacement
blades w/ dispenser
• SPMSSK2-502 – Black
• Single beveled edge
for scraping
• SPMSSK2-505 – Camo
• Straight edge for cutting
• Fits most belts and tool belts
• .040” (1mm thick)
• SPMSSK2-504 – Red
• Blade holder incorporates the new, patented, blade changing that
requires NO TOOL.
• 4” handle for larger hands
• Lanyard hole at the bottom of the handle
SAFETY SUPPLIES
• Brand new clip style, designed to keep the
SK2 SuperKnife deeper in your pocket, or
lower on your belt
GENERAL SUPPLIES
• Convenient belt clip
• SPMSSK2-501 – Silver
LANDSCAPING
SUPERKNIFE CARRYING CASE – SPMS907
WORKWEAR
127
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
AWLS
CUSHION GRIP SCRATCH AWL – KTLS650
• Professional, heavyduty, hard pointed awl
• Scribes metal, starts screw holes, performs a
variety of piercing and punching jobs
• Rigid, chrome plated, heat treated, tempered
steel shank
• Internal flanges provide solid shank anchor
• Cushion grip handle allows for greater comfort
WOODSPLITTING WEDGES
SQUARE HEAD WOODSPLITTING WEDGE –
WOOS11322
SQUARE HEAD WOODSPLITTING WEDGE –
WOOS11329
• 4 lbs.
• 6 lbs.
• 8-1/4”
• 9-1/2”
• 1-5/8” head
• 1-7/8” head
BITS, BLADES
& ABRASIVES
WOOD SPLITTER
WOOD SPLITTER – WOOS11902
• 8 lbs. head weight
HAND TOOLS
• 7/8” x 2-1/2” eye size
• 36” hickory handle
AXES
LANDSCAPING
DOUBLE BIT MICHIGAN AXE – WOOS11886
GENERAL SUPPLIES
• 3-1/2 lb. head weight
• 36” Hickory
CLAY PICKS
SAFETY SUPPLIES
IMPORTED CLAY PICK HEADS
CLAY PICK – WOOS1195500
• 6 lbs. head weight
• #6 eye size
• WOOS11378 – 5 lbs.
• WOOS11396 – 7 lbs.
w/HDL GD
WORKWEAR
• #6 eye size
128
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
CUTTER MATTOCKS HEAD – WOOS11349
IMPORTED PICK MATTOCKS HEAD –
WOOS11365
• 5 lbs.
• 5 lbs.
• #6 eye size
• #6 eye size
• 5 lbs.
• #6 eye size
MATERIAL HANDLING
IMPORTED CUTTER MATTOCKS HEAD –
WOOS11354
LIGHT EQUIPMENT
MATTOCKS
CONCRETE & MASONRY
POST DRIVER
MANUAL POST DRIVER – GEEEHT77
• One man, manual post driver
POWER TOOLS
BITS, BLADES
& ABRASIVES
BARS
18 OZ. HANDY BAR – EASS-HB-15
• Forged half round for
added strength
• 18 oz. approximate
head weight
HAND TOOLS
• 15” approximate overall length
• Wide, thin blade for easy prying
BARS
LARGE HANDLE PRY BAR – PTOS2140
ROLLING HEAD BAR – PTOS2126
• 14-1/2”
• 12”
• Large handle for a better grip and
added comfort
• Pry and aligning bar with a long pointed taper
LANDSCAPING
ALIGNING PRY BAR – PTOS2120
• 18”
• Tapered handle for aligning large objects
• 90 degree rolling head
ROLLING HEAD BAR – PTOS2130
• Pry and aligning bar with a long pointed taper
• 91 degree rolling head
SAFETY SUPPLIES
• 16”
GENERAL SUPPLIES
• Used for prying, positioning and
aligning applications
WORKWEAR
129
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
BARS
CONNECTING BAR – KTLS3240
HEX BAR – KTLS3242
ROUND BAR – KTLS3248
• 30”
• 30”
• 30”
• Provides extra leverage when positioning steel
members and aligning bolt holes
• Forged fit up bar is pointed on one end
• Chisel end is straight
• Chisel end is at a 15 degree angle to give
greater leverage
• Chisel end is at a 15 degree angle to give
greater leverage
GRIZZLY BAR – KTLS64306
REBAR HICKEY
• A heavy, strong, multipurpose tool that saves
time and effort on the job
• KTLS64309 – Bends #3 & #4
rebar, 65 & 90 degree angle
• KTLS64310 – Bends #5 rebar, 65
degree angle
• The 3” width protects concrete when
stripping forms
• KTLS64311 – Bends #6 rebar, 65 degree angle
• Efficient blade angle and 55-1/2” total length
provide high leverage as a crew bar and nail
and spike puller
• Blade is forged and hardened alloy with keyhole nail-pulling slot in center and V-notch in
tapered edge
• KTLS64312 – Bends #7 thru #9 rebar, 65
degree angle
• Lightweight rebar hickey has exceptionally
durable steel alloy head and extra strong handle to withstand punishing service conditions
BARS
DIAMOND POINT SAN ANGELO BAR –
WOOS11752
FULLY PAINTED GOOSENECK WRECKING BAR
• Used for digging and prying of dirt and large
rock
• WOOS11698 – 18” in length, 5/8” stock
• 17 lbs.
• Used to pry and move heavy objects
• 72” in length
• 18 lbs.
• 1” hex stock
• 60” in length
• WOOS11730 – 48” in length, 1” stock
• 1-1/4” stock
PINCH POINT CROW BAR – WOOS11601
• Used for small wrecking jobs
• Claw on end removes nails
• 6 lbs.
• 10 lbs.
• 22 lbs.
• 36” in length
• 48” in length
• 64” in length
• 7/8” stock
• 1” stock
• 1-3/8” stock
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Very efficient nail pulling tool even in
awkward positions
130
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
STRIPPING BAR WITH CLAW – WOOS11688
• Used primarily to loosen slate in mines
• Used to strip wooden forms from
cured concrete
• 14 lbs.
• Has a claw to remove nails
• 26 lbs.
• 60” in length
• 12 lbs.
• 66” in length
• 1” hex stock
• 48” in length
• 1-1/2” stock
STRIPPING BAR WITHOUT CLAW –
WOOS11690
TELEGRAPH DIGGING BAR – WOOS11685
• Used to dig holes for insertion of post
• 12 lbs.
• The sharp end is used to line up long posts
once they are in and being tamped into place
POWER TOOLS
• Used to strip wooden forms from
cured concrete
• 22 lbs.
• 96” in length
• 48” in length
• 1” stock
• 1” stock
TAMPER W/HANDLE – WOOS11337
• 11 lbs.
• 14 lbs.
• 42” ash handle
• 8” x 8” head
• 10” x 10” head
BITS, BLADES
& ABRASIVES
TAMPERS
TAMPER W/HANDLE – WOOS11334
CONCRETE & MASONRY
• 1” stock
MATERIAL HANDLING
SLATE BAR – WOOS11743
LIGHT EQUIPMENT
BARS
HAND TOOLS
SLEDGE HAMMERS
DOUBLE FACE SLEDGE HAMMER –
WOOS11979
• WOOS11969 – 4 lbs.
• 6 lbs.
• 8 lbs.
• 3/4” x 1” eye size
• 1” x 1-3/8” eye size
WOOS11988
WOOS11991
WOOS11993
• 8 lbs.
• 10 lbs.
• 10 lbs.
• 1” x 1-3/8” eye size
• 1” x 1-3/8” eye size
• 1” x 1-3/8” eye size
• 34” FiberPro fiberglass handle
• WOOS11962 – 2 lbs.
LANDSCAPING
WOOS11974
DOUBLE FACE SLEDGE HAMMER
• WOOS11963 – 3 lbs.
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
131
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
SLEDGE HAMMERS
DOUBLE FACE SLEDGE HAMMER WOOS11994
WOOS11996
WOOS11997
• 12 lbs.
• 12 lbs.
• 16 lbs.
• 1” x 1-3/8” eye size
• 1” x 1-3/8” eye size
• 1” x 1-3/8” eye size
WOOS11999
• 20 lbs.
POWER TOOLS
• 1-1/4” x 1-1/2” eye size
SLEDGE HAMMERS
WARREN TOOL GROUP
BITS, BLADES
& ABRASIVES
SLEDGE HAMMER
• WARSHVS1030 –
10 lb., 30” handle
• WARSHVS1230 –
• WARSHVS1430 –
HAND TOOLS
• WARSHVS412 – 4 lb., 12” handle
• WARSHVS830 – 8 lb., 30” handle
• Unbreakable handle sledge hammer
• Made with tempered steel, and surrounded by
heavy-duty molded rubber
• High visibility head adds instant identification
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Ergonomic handle absorbs shock, slip
resistant grip
132
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
BOLT CUTTERS
BOLT CUTTER
• KTLS63314 – 14”, steel handles
MATERIAL HANDLING
• KTLS63318 – 18”, steel handles
• Handles have heavy vinyl grips with
flat grips ends for 90 degree cuts
• All purpose, center-cut jaws for soft, medium,
and hard metals
CONCRETE & MASONRY
• Forged, alloy tool steel jaws are precision
ground for sure, efficient cutting and long life
• Lockplate reinforcement prevents jaw bolts
from loosening or turning, keeps jaws in correct alignment
• One adjustment realigns cutting edges
• 3-point toggle joint multiplies 50 lbs. of hard
pressure on handles to 4,000 pounds at cutting jaws
BOLT CUTTER – WARS30628
• WARS30625 – 14”
• 36”
• WARS30626 – 18”
• Compound cutting
action for greater cutting power
• WARS30627 – 24”
• Compound cutting
action for greater cutting power
• Longer handles provide greater leverage
• Rubber grip handles, non-slip
• Longer handles provide greater leverage
• Rugged ductile iron frames with black oxide
screws, swivel and sliding crosspin handles
• Designed for home craftsman, woodworker
and light industrial service
HAND TOOLS
• Hardened and tempered steel
BITS, BLADES
& ABRASIVES
BOLT CUTTER
WARREN TOOL GROUP
• Adjustment screw for easy re-alignment of
cutting edges
BOLT CUTTERS-INDUSTRIAL GRADE –
PORS0590MC
• PORS0090MC – 18”, center cut
• 36”, center cut
• 42”, center cut
• Drop forged precision ground alloy tool
steel jaws
steel jaws
• Cuts soft, medium or hard materials
• Cuts steel cable, coarse or fine stranded cable
with minimal distortion
• Enhances leverage and increases safety
steel jaws
• Maximum hardness of material to be cut:
Brinell 455/Rockwell C48
• Screw type adjustment realigns edges
• Lockplate keeps jaws from loosening
SAFETY SUPPLIES
BOLT CUTTERS-INDUSTRIAL GRADE –
PORS0390MC
GENERAL SUPPLIES
BOLT CUTTERS-INDUSTRIAL GRADE
LANDSCAPING
BOLT CUTTERS
POWER TOOLS
BOLT CUTTERS
• Steel handles with rubber grips
WORKWEAR
133
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
STRAP CUTTER
STEEL STRAP CUTTER – PORS1290G
• 12”
• Shear cut blades
• Workhead has black oxide, rust resistant finish
• Cuts pre-drilled and slotted angles up to 45
degrees on either leg
REBAR CUTTER
REBAR CUTTER AND BENDER – PORS0590RBJ
POWER TOOLS
• 52”
• Rugged tool,
shear-cut blades
• Mounts easily on
most flat surfaces
HAND TOOLS
BITS, BLADES
& ABRASIVES
• 1/4” soft wire rope or cable, piano wire, or aircraft cable
CABLE CUTTERS
CABLE CUTTER-WIRE ROPE – PORS0390MTN
POCKET WIRE ROPE AND CABLE CUTTER –
PORS0690TN
• 36”
• 7-1/2”
• Cuts up to 5/8”
• Pocket size cuttershear cut blades
• Notched, shear cut blades hold and lock cable
in cutting position
• Excellent cutter for 3/16” hard wire rope
or cables
• Lockplate keeps jaws from loosening
• 1-handed operation gives extra leverage for
continuous cuts
• Cuts wide steel strap, quickly and cleanly
• Steel handles with rubber grips
• Cushion grip handles
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Maximum hardness of material to be cut:
Brinell 455/Rockwell C48
134
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
CABLE CUTTERS
RATCHETING CABLE CUTTER – KTLS63060
• High leverage design
for exceptional cutting
capability
• Cleanly cuts copper up
to 400 MCM, as well as
aluminum and multiconductor cables up to
600 MCM
• Precision, one-hand shearing action
• Cable gripping shear type jaws
• Perfect for working in confined spaces
• Can be carried in most tool pouches
• Beveled jaw tips provide proper mating and
shearing action, which protects leading jaw
edges
• Through hardened (not case hardened) for
longer lasting cutting surfaces
• Hold open spring speeds cutting action
• Quick release lever opens blade at anytime
during operation
• Large, finger-formed handles have limit
guards and plastic covering for comfortable,
non-slip grip
• Compact, lightweight tool can be locked in
closed position for pouch carrying
POWER TOOLS
• Custom, US made tool steel
• Unique ratchet action holds cable tight
and allows rapid, straight cuts with
minimum effort
CONCRETE & MASONRY
• Hot riveted joint for smooth action and no
handle wobble
MATERIAL HANDLING
HIGH LEVERAGE CABLE CUTTER – KTLS63050
• Not designed for cutting steel or ACSR
TUBING CUTTERS
QUICK ACTING TUBING CUTTER – RIDS31632
SCREW FEED TUBING CUTTER – RIDS32910
• 1/8” - 1-1/8” capacity
• 1/4” - 1-5/8” capacity
• 1/8”-1” capacity
• Enclosed feed screw
to eliminate clogging
and jamming
• I-beam construction
• Clean, square cuts are
easily made on copper,
brass, aluminum and
thin-wall conduit
• Hardened wear surfaces
• Grooved rolls for close-toflare cuts
• Feature a convenient fold away reamer
• Speeds metal removal
• Free of chlorine and other halogens, PCB’s and
heavy metals
THREAD CUTTING OIL – RIDS70835
• 1 gallon
• 1 gallon
• Dark Oil – traditional mineral
oil with low odor and antimist formulation
• Nu-Clear Oil – clear mineral
oil with low odor and antimist formulation
• Cools threads and pipe
during operation
• Special low temperature
properties maintain workable
viscosity to 20 degrees F
• Power head with new “scroll” design
• Lower center of gravity
• 7’ vacuum hose
GENERAL SUPPLIES
• Free of chlorine and other halogens, PCB’s and
heavy metals
LANDSCAPING
THREAD CUTTING OIL – RIDS70830
HAND TOOLS
• Thrust bearing slide assemblies for smooth
operation
• Speeds metal removal
BITS, BLADES
& ABRASIVES
ENCLOSED TUBING CUTTER – RIDS31622
SAFETY SUPPLIES
WORKWEAR
135
LIGHT EQUIPMENT
HAND TOOLS
WELDING CLAMP
LOCKING WELDING CLAMP – CRESC9W
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 9” welding clamp
• World famous
Crescent brand
• Maximum jaw opening per ASME specs
• Patented angled tooth pattern for better grip
• Nickel-plated finish resists rust and corrosion
• Compound action for powerful non slip
locking grip
• Locking “C” clamps are faster and easier to
use than standard clamps
SHEET METAL CLAMP
LOCKING SHEET METAL CLAMP –
CRESC8SMV
• 8” sheet metal clamp
• World famous
Crescent brand
BITS, BLADES
& ABRASIVES
locking grip
LANDSCAPING
HAND TOOLS
• Locking “C” clamps are faster and easier to
C-CLAMPS
C-CLAMP – PTOS402S
C-CLAMP – PTOS403
• 0-2” deep throat spatter resistant
• 0-3” standard service
deep throat
• 0-3” deep throat spatter resistant
• Ball jointed impact
resistant pressure pad
• Hot forged for strength
• Forcing screw has sliding T-handle
C-CLAMP - PTOS404
C-CLAMP - PTOS406
deep throat
• 0-4” deep throat
spatter resistant
deep throat
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
136
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
C-CLAMPS
C-CLAMP – PTOS402
deep throat
deep throat
• Hole locations and pilot starting points
• Forcing screw has sliding t-handle
MATERIAL HANDLING
C-CLAMP – PTOS408
• Modified parabolic struck end
C-CLAMPS
WARREN TOOL GROUP
C-CLAMP
C-CLAMP – WARS41409
• WARS20303 – 4”,
2-3/4” throat depth
• WARS41406 – 4”,
• 8”, 4” throat depth
• WARS20304 – 6”,
• WARS41407 – 5”,
3” throat depth
• WARS20305 – 8”, 4-1/2” throat depth
• 140 series carriage c-clamp
• 400 series drop forged, regular duty with extra
deep throat
• Most popular c-clamp style for over 50 years
• Exceptional value and performance
• Rugged ductile iron frames with black oxide
screws, swivels and sliding crosspin handles
• Most popular c-clamp
style for over 50 years
• Ergonomic handle absorbs shock, slip
resistant grip
• High visibility head adds instant identification
• Designed for home craftsman, woodworker
and light industrial service
• CRESC11CCV –
11” c-clamp
• CRESC11CCSV –
11” c-clamp
• CRESC6CCV –
6” c-clamp
• CRESC6CCSV –
6” c-clamp
• World famous Crescent brand
• Compound action for powerful non-slip
locking grip
• Compound action for powerful non-slip
locking grip
• Locking “c” clamps are faster and easier to
GENERAL SUPPLIES
LOCKING “C” CLAMP WITH SWIVEL PADS
LANDSCAPING
LOCKING “C” CLAMP WITH REGULAR TIPS
HAND TOOLS
C-CLAMPS
BITS, BLADES
& ABRASIVES
• Acme rolled spindle threads, maximum
strength and clamping force
• 140 series carriage
C-clamp
POWER TOOLS
C-CLAMP
CONCRETE & MASONRY
SAFETY SUPPLIES
WORKWEAR
137
LIGHT EQUIPMENT
HAND TOOLS
CHAIN CLAMP
LOCKING CHAIN CLAMP – CRESC20CH
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 9” chain clamp
• World famous
Crescent brand
locking grip
CHISELS
COLD CHISEL
• PTOS86A1/2 – 5/8”
• PTOS86A1/2X12 – 1/2” x 12”
BITS, BLADES
& ABRASIVES
• PTOS86A1/4 – 5/16”
• PTOS86A1X8 – 1-3/16”
• PTOS86A3/16 – 1/4”
• PTOS86A3/4X12 – 7/8” x 12”
• PTOS86A3/4X8 – 7/8” x 8”
• PTOS86A3/8 – 7/16”
HAND TOOLS
• PTOS86A5/16 – 3/8”
• PTOS86A5/8 – 3/4”
• PTOS86A5/8X12 – 5/8” x 12”
• PTOS86A7/16 – 1/2”
• PTOS86A7/8X12 – 1” x 12”
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• PTOS86A7/8X8 – 1” x 8-1/8”
• Designed to cut wrought iron, cast iron, steel,
brass, bronze, copper, aluminum, bolts, nuts
and rivets
• Modified parabolic striking end
SPUD WRENCH
SPUD WRENCH – CRESAT115SPUD
• 16”- black
Phosphate
• Works on
fasteners up to
1-1/2” in size
• Tapered tang for aligning bolt holes or other
mating parts
• Alloy steel and heat treated
WORKWEAR
• Black phosphate finish resists corrosion
138
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
CRIMPERS
CRIMPING/CUTTING TOOL – KTLS1005
MATERIAL HANDLING
• Accommodates wire
from no. 10 to 22 AWG
• Specially hardened wire cutter nose
• Tapered nose design for working in confined
spaces
• Crimping die marked for insulated and noninsulated solderless terminals and connectors
CONCRETE & MASONRY
• Plastic dipped, cushioned handles for comfort
handle wobble
DIGGERS/TAMPERS
POWER TOOLS
POST HOLE DIGGER BARS WITH TAMPER TOP
– WOOS11600
• Used to dig holes in the ground with the
blade end
BITS, BLADES
& ABRASIVES
• The tamper head is used to tamp the earth
around fence posts and deck supports in the
ground
• 17 lbs.
• 69” in length
• 1” stock
• 1-1/4”
• 1-1/2”
• 1-3/4”
• 1,300 lb. rated
capacity
• 2,400 lb. rated
capacity
• 3,200 lb. rated
capacity
• Maximum load ratings are drastically reduced
when loading at an angle
• Angular loads should be avoided
whenever possible
whenever possible
whenever possible
• Certified mercury free
EYE BOLTS-SHOULDER THREADED FORGED –
PTOS94026
PTOS94027
PTOS94028
• 1-3/4”
• 2”
• 2-1/4”
• 4,000 lb. rated
capacity
• 5,000 lb. rated
capacity
• 7,000 lb. rated
capacity
whenever possible
whenever possible
whenever possible
SAFETY SUPPLIES
PTOS94025
GENERAL SUPPLIES
PTOS94024
LANDSCAPING
PTOS94022
HAND TOOLS
EYE BOLTS
WORKWEAR
139
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
EYE BOLTS
PTOS94029
PTOS94031
• 2-1/2”
• 3”
• 9,000 lb. rated
capacity
• 15,000 lb. rated
capacity
whenever possible
whenever possible
FASTENERS
HEAVY-DUTY HAMMER TACKER –
ARRSHT-50A
HEAVY-DUTY TACKER STAPLE GUN –
ARRST-50M
THE MIGHTY MO EXTRA HD HAMMER TACKER
– ARRSHT-65
• All steel construction
• Patented jam proof
mechanism
mechanism
• High carbon hardened steel working parts
• Over 50 years of
tested durability
• Precision locked rear loading
• Precision locked rear loading
• Ideal for new roofing installation
• Retractable striking edge
BITS, BLADES
& ABRASIVES
mechanism
• Specially designed power grip handles
• Durable chrome finish
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
FASTENERS ACCESSORIES
140
1/2” CROWN STAPLES – ARRST-50-1/2
1/4” CROWN STAPLES – ARRST-50-1/4
3/4” CROWN STAPLES – ARRSHT-65-3/4
• Model 508
• Model 504
• Model 65S
• T50 type 1/2” staples
• T50 type 1/4” staples
• HT65 type 3/4” staples
• Crown width 3/8”
• Crown width 3/8”
• Crown width 1”
EXTRA SLIM TAPER FILE
FLAT BASTARD CUT FILE
FLAT RIGID FILE – CFLS20342
• CFLS14665 – 6”
• CFLS03367 – 4”
• 12”
• CFLS14698 – 7”
• CFLS03467 – 6”
• Made for filing saws with 60 degree
angle teeth
• CFLS03566 – 8”
• For smooth, rapid work on cast iron, bronze,
lead, babbitt and aluminum
• CFLS03665 – 10”
• Also for zinc and plastics
• Triangular shape, single cut
• CFLS03764 – 12”
• Edges set and cut for filing gullets between
saw teeth
• Used by machinists, machinery builders, ship
and engine builders
• Any steel up to the hardness of annealed
tool steel
• Taper slightly towards the point
• Also by repairman and others who require
rapid removal of metal
FILES
• Rectangular shape, curved cut, rigid type
with tang
• Pitch and rake designed to avoid pinning
• Rectangular in cross section and taper slightly
towards point in width
• Double cut on sides, single cut on edges
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
GREAT AMERICAN CROSSCUT FILE
HALF ROUND BASTARD CUT
HALF ROUND PIPELINER FILE – CFLS05190
• 14”
• CFLS04795 – 6”
• Used on concave, convex and flat surfaces
• For sharpening saws of Great American type &
varieties of crosscut saws
• CFLS04896 – 8”
• Rounded on 1 side, flat on opposite
• CFLS05094 – 12”
• Backs are single cut
• CFLS05194 – 14”
• Flat side is single cut
• Rounded back and thin edge are cut
• CFLS05307 – 16”
CONCRETE & MASONRY
• CFLS04695 – 4”
• Used on concave, convex and flat surfaces
• Rounded on 1 side, flat on opposite
• Backs are single cut
• Flat side of all half-round files are double cut
REGULAR TAPER FILE – CFLS13930
• 8”
• CFLS08354 – 6”
• 10”
• Used primarily by tool and die makers with
work having acute angles
• CFLS08497 – 8”
• CFLS08642 – 10”
angle teeth
• Triangular shape
• CFLS08737 – 12”
• Double cut on sides, single cut on
sharp edges
• CFLS08832 – 14”
saw teeth
• Used for sharpening mill or circular saws
• Also for draw-filing and finishing metals
BITS, BLADES
& ABRASIVES
MILL BASTARD CUT FILE
POWER TOOLS
KNIFE BASTARD CUT FILE – CFLS06898
• Knife files are supplied with safe backs
MATERIAL HANDLING
• CFLS02435 – 8”
• CFLS02465 – 10”
LIGHT EQUIPMENT
FILES
• Rectangular shape, single cut on sides
and edges
• 2 square edges
SLIM TAPER FILE
SQUARE BASTARD CUT FILE
• CFLS11526 – 4”
• CFLS14162 – 5”
• CFLS12967 – 6”
• CFLS13196-6 – 10”
• CFLS12019 – 10”
• CFLS14341 – 10”
• CFLS13310 – 12”
• CFLS12134 – 12”
angle teeth
• Used on slots, keyways and general
surface filing
• Square shape, double cut
• Tapered slightly towards point
• Single cut
saw teeth
• Tapered slightly towards point
THREE SQUARE SECOND CUT FILE
WARDING SMOOTH CUT FILE – CFLS16573
• CFLS15958 – 6”
• 4”
• CFLS16069 – 8”
• Used primarily by locksmiths in repairing &
filing ward notches in keys
• CFLS12248 – 14”
• Primarily used to file circular openings or
concave surfaces
• For general use by machinists for filing
internal angles
• Thin rectangular shape
• Double cut on sides, single cut on
sharp edges
• Filing taps and gutters
• Also suited for use in narrow spaces where
other files will not fit
• Triangular shape, double cut
• Sharp corners are slightly set and cut, cut to
the point
WORKWEAR
• More acute than right angles, clearing out
square corners
SAFETY SUPPLIES
• CFLS13081 – 8”
• CFLS14290 – 8”
GENERAL SUPPLIES
• CFLS14224 – 6”
LANDSCAPING
• CFLS11716 – 6”
• CFLS11904 – 8”
HAND TOOLS
ROUND BASTARD CUT FILE
141
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
FISH TAPES
SPEEDWAY FLAT STEEL FISH TAPE –
KTLS50211
SPEEDWAY FLAT STEEL FISH TAPE –
KTLS50221
• 120’, tempered, high-quality
1/8” wide steel tape
• 240’, tempered, high quality
1/8” wide steel tape
• Extra large grip-it handle
designed to be gripped from
different angles
• Extra large grip-it handle
designed to be gripped from
different angles
• Hi-Viz orange case makes fish tape easy to
spot on the jobsite
• Hi-Viz orange case makes fish tape easy to
spot on the jobsite
• Winder reel is made of high impact plastic for
durability and smooth operation
• Winder reel is made of high impact plastic for
durability and smooth operation
• Reel turns easily in either direction for one
handed operation
• Reel turns easily in either direction for one
handed operation
GEAR PULLERS
CONE PULLER
GEARING & BEARING SEPARATOR –
PTOS4331
GEARING & BEARING SEPARATOR –
PTOS4332
• PTOS4250 – 6 ton, 3-way, 2 jaw
• 2-13/32” capacity
• 4-3/8” capacity
• PTOS4255 – 6 ton, 3-way, 3 jaw
• PROTO-EASE
• PROTO-EASE
• Aligns holes in
two or more
metal sheets
HAND TOOLS
BITS, BLADES
& ABRASIVES
• 4” reach
• 5” spread
JAW GEAR PULLER
JAW GEAR PULLER – PTOS4038
SLIDE HAMMER PULLER – PTOS4260
• PTOS4033 – 4”,
2 jaw, 2 ton
• 10”, 3 jaw, 7 ton
• 6 ton, 3 way, 3 jaw
• Automatic grip
tightening
• 4” reach
• PTOS4034 – 4”,
3 jaw, 2 ton
• 5” spread
• Forcing screw has
sliding T-handle
• PTOS4037 – 10”,
2 jaw, 7 ton
GENERAL SUPPLIES
LANDSCAPING
• Automatic grip tightening
HAMMERS
1-13/16” SHINGLERS HAMMER – EASS-E3-CA
14 OZ. DRYWALL HAMMER – EASS-E3-11
16 OZ. CLAW HAMMER – EASS-1016C
• Non-vinyl grip
• Non-vinyl grip
• Wood handle
• 1-13/16” approximate
cutting edge
head weight
head weight
cutting edge
• 13-1/2” approximate overall length
• For scoring drywall
• For driving and removing nails
16 OZ. CLAW HAMMER – EASS-E3-16C
16 OZ. RIP HAMMER – EASS-E3-16S
1-7/8” SHINGLERS HATCHET – EASS-E3-S
• Non-vinyl grip
• Non-vinyl grip
• Non-vinyl grip
head weight
head weight
cutting edge
• 12-1/2” approximate cutting edge
• For cutting and applying shingles
WORKWEAR
SAFETY SUPPLIES
• Replaceable blade and gauge
142
• For cutting and applying shingles
• Replaceable gauge
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
20 OZ. FRAMING HAMMER – EASS-E3-20SM
20 OZ. RIP HAMMER – EASS-E3-20S
• Non-vinyl grip
• Non-vinyl grip
• Non-vinyl grip
head weight
head weight
head weight
• Milled face
• Non-vinyl grip
• Non-vinyl grip
• Non-vinyl grip
head weight
head weight
head weight
• Smooth face
• Milled face
• Smooth face
30 OZ. FRAMING HAMMER – EASS-E3-30S
3-1/8” CARPENTERS HATCHET – EASS-E3-1H
• Non-vinyl grip
• Non-vinyl grip
• Non-vinyl grip
head weight
head weight
cutting edge
• For cutting soft wood
• Milled face
• Smooth face
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
20 OZ. CLAW HAMMER – EASS-E3-20C
LIGHT EQUIPMENT
HAMMERS
HAMMERS
DEAD BLOW HAMMER
• 2.6 lb. head
weight
• PTOS1430DB –
2 lb. head weight
• PTOS1308PD – 8
oz. head weight
• Non-marring
soft brass head absorbs blow impact
• PTOS1431DB –
4 lb. head weight
• PTOS1312PD – 12 oz. head weight
• Non-sparking for safe use near combustible
materials
• Engineered to provide maximum safety for
non-sparking application
• Ideal for heavy blows with limited swing
• Tough drop forged head with tim tempered
hardened face and pein
• Fiberglass handle
• 30% more driving force with less effort, eliminates rebound and vibration
• Steel shot
• Hardwood handles have contoured shape with
red lacquer handle
HAND DRILLING HAMMER
HAND DRILLING HAMMER – PTOS1444G
• 3 lb. head weight
• PTOS1442G – 2 lb.
head weight
• 4 lb. head weight
• 30% more driving force with less effort, eliminates rebound and vibration
• PTOS1443G – 3 lb.
head weight
• Features a well balanced, drop forged steel
head with a hardened face
• For use with chisels, punches, star drills and
hardened nails
• Features a well balanced, drop forged
steel head with a
hardened face
• For use with chisels, punches, star drills and
hardened nails
• Modified parabolic struck end, greater resistance to mushrooming
WORKWEAR
• Ideal for heavy blows with limited swing
SAFETY SUPPLIES
DEAD BLOW HAMMER – PTOS1432DB
GENERAL SUPPLIES
• Face, chamfer, cheeks and pein are polished
and have clear lacquer coating
• Engineered to
provide maximum safety for
non sparking application
LANDSCAPING
BRASS HAMMER – PTOS1432G
• PTOS1304PD – 4
oz. head weight
HAND TOOLS
BALL PEIN HAMMER W/WOOD HANDLE
143
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
HAMMERS
RUBBER MALLET – PTOS1368
SOFT FACE HAMMER W/TIPS – PTOSSF200HM
• 2-5/8” head
diameter
• One medium and
one hard tip
• Soft but tough, non flaking neoprene head
• Hickory handle
• 1.43 lbs.
• Steel shot
HAMMERS
CROSS PEIN HAMMER
• WOOS11967 – 3 lbs.
• WOOS11973 – 4 lbs.
BITS, BLADES
& ABRASIVES
HAMMERS
RIP CLAW HAMMER
HAND TOOLS
• CRESSS20R – 20 oz.
solid steel
• CRESSS22R – 22 oz.
solid steel
• Patent pending anti-vibration shock absorbing
technology
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Anti-vibration feature absorbs shock and minimizes muscle fatigue
• 1-piece forged solid steel construction
• Co-molded contoured handle for increased
comfort and control
• High luster, full polished finish
HACKSAWS
HACKSAW – DEWSDW3970
HACKSAW BLADES – DEWSDW3971-10
• 12” hacksaw frame
• 10” 18 TPI 10/Pak
• 10” 24 TPI 10/Pak
• Quick & easy blade change
• High speed steel teeth
• Removable hand guard
• High carbon steel backer
• Soft feel grip
• Specially formulated coating minimizes friction
• High tension knob for tight fit
• RC 64-66 tooth hardness for increased wear
resistance
resistance
• Tooth designs (rake and wavy)
• Jab saw capability for cutting in
tight spots
• Easy blade storage
WORKWEAR
• 45 & 90 degree cutting
144
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
• 12” 14 TPI 10/pak
• 12” 18 TPI 10/pak
resistance
resistance
LIGHT EQUIPMENT
HACKSAWS
• 10” 32 TPI 10/pak
resistance
DEWSDW3977-10 – 12” 32 TPI 10/PAK
• 12” 24 TPI 10/pak
resistance
• RC 64-66 tooth hardness for
increased wear resistance
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
BITS, BLADES
& ABRASIVES
HACKSAWS
NO 10 HACKSAW FRAME – CFLS80952
• 12”
• 10”
• Adjustable crank handle for tension up to
30,000 PSI torque
• High impact, contoured handle
• Spare blades can be stored inside frame
• 45 degree blade adjustment
• Adjusts from 10” to 12”
HAND TOOLS
HIGH TENSION HACKSAW FRAME –
CFLS80956
• Blade can be positioned for 45 degree or 90
degree cutting
LANDSCAPING
HAND SAW
10” MINI UTILITY SAW – STNS20221
• 12 point induction
hardened teeth stay
sharp 3 to 5 times
longer than standard teeth
GENERAL SUPPLIES
• 10” 12 TPI
• Aggressive 3-sided tooth design cuts wood
50% faster than conventional handsaws
• Hardwood handle is contoured to fit the
hand comfortably
SAFETY SUPPLIES
• 10” blade is ideal for access in tight spaces
and cutting a variety of materials such as plastic, pipe, particle board and wood
• Compact 15-1/2” overall length fits conveniently in most tool boxes
WORKWEAR
145
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
HAND SAWS
PVC/ABS PLASTIC PIPE HAND SAW –
LENS20980-HSF180
PVC/ABS PLASTIC PIPE HAND SAW –
LENS20985-HSF12
PVC/ABS PLASTIC PIPE HAND SAW-REPLACEMENT BLADE – LENS20981-HSB18
• 18” blade & handle
• 12” blade & handle
• Breezes through
material – unique pull
cutting teeth cut
quickly through all
plastic pipe and wood
• Breezes through
material – unique pull
cutting teeth cut
quickly through all
plastic pipe and wood
• 18” replacement
blade
• Durable blade – rigid carbon blade with hardened teeth for long life
• Durable blade – rigid carbon blade with hardened teeth for long life
• Fits LENS20980HSF180
• Comfortable handle – large opening for
work gloves
PVC/ABS PLASTIC PIPE HAND SAW-REPLACEMENT BLADE – LENS20982-HSB12
POWER TOOLS
• 12” replacement
blade
• Fits LENS20982HSB12
HAND TOOLS
BITS, BLADES
& ABRASIVES
HEX BIT SETS
3/8” & 1/2” DR 10 PC HEX BIT SET –
PTOS4900A
3/8” & 1/2” DR 10 PC METRIC HEX BIT SET –
PTOS4900MA
3/8” DR 7 PC HEX BIT SET – PTOS4900-7C
• 1/8” thru 5/8”
• 4mm thru 17mm
• 1/8” thru 3/8” hex bits
• Blow molded box
• Blow molded box
• Socket clips, 6-1/4”
socket bar
3/8” DR EXTRA LONG METRIC HEX BIT
3/8” DR HEX BIT
HEX BITS
• PTOS4990-1/4 – 1/4”
• 3/16”
• PTOS4990-4MXL – 4mm
• Two-piece design allows replacement of
worn bits
• PTOS4990-10MXL – 10mm
• PTOS4990-1/8 – 1/8”
• PTOS4990-3/16 – 3/16”
• PTOS4990-3/8 – 3/8”
• PTOS4990-5/16 – 5/16”
• PTOS4990-7/32 – 7/32”
worn bits
worn bits
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
3/8” DR EXTRA LONG HEX BIT –
PTOS4990-3/16XL
146
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
HEX BITS
3/8” DR METRIC HEX BIT
• PTOS4990-4M – 4mm
MATERIAL HANDLING
• PTOS4990-5M – 5mm
• PTOS4990-6M – 6mm
• PTOS4990-7M – 7mm
• PTOS4990-8M – 8mm
• PTOS4990-10M – 10mm
HEX KEY SETS
HEX KET SET 13 PC BALL STYLE – PTOS4995
HEX KEY SET 11 PC T HANDLE – PTOS4968
HEX KEY SET 13 PC – PTOS4980
• .05” to 3/8”
• 5/64” thru 3/8”
• .05” thru 3/8”
• Molded plastic holder
HEX KEY SET 7 PC FOLDING – PTOS4974CG
• .05” thru 3/8”
• 1.5mm thru 6mm
• .05” thru 5/32”
• Steel case
• Black oxide bits
BITS, BLADES
& ABRASIVES
HEX KEY SET 13 PC EXTRA LONG – PTOS4983
POWER TOOLS
• Screws can be tightened or loosened at angles up to 25 degrees
CONCRETE & MASONRY
worn bits
• Chrome plated
steel case
HEX KEY SET 9 PC METRIC – PTOS4984
• 5/64” thru 1/4”
• 1.5mm thru 10mm
• Black oxide bits
LANDSCAPING
• Chrome plated
steel case
HAND TOOLS
CABLE/LINEMANS SKINNING KNIFE –
KTLS1570-3
• No contact between
stainless steel ring and
hardened steel blade
• Blade and ring are securely molded in handle
• Notch on blade back for scraping or removing
wire insulation
SAFETY SUPPLIES
• Three inch steel blade withstands frequent
scoring and slitting of cable jacket
GENERAL SUPPLIES
KNIFE
• Comfortable textured handle with finger
grooves and guard
• Leather sheath available
WORKWEAR
• Rectangle shaped handle design for attachment to some utility hot stick equipment
147
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
LASERS
HD 18V CORDLESS ROTARY LASER COMBO
KIT – DEWEDW073KD
LASER PLUMB BOB – DEWEDW082K
SELF LEVELING ROTARY LASER COMBO KIT –
DEWEDW077KD
• Manual leveling system is accurate to
within 1/4” per 100’
• Self-leveling plumb
bob is accurate within 1/8” @ 50’
• Fully automatic horizontal and vertical
self leveling
• Multi-voltage adapter
accepts DeWALT batteries 9.6V-18V
• One button operation
• Dual side-by-side laser diodes
• Overmolded housing
helps maintain
calibration
• Multi-voltage
adapter accepts
DeWALT batteries
9.6V-18V
• Protected rotary head & side impact roll cage
• Focused laser beam
• Protected rotary head & weatherproof design
• Variable speed, 0-600 rpm
• Bright, sharp, high power beam
• Two-position pivoting head
• Locating magnets hold laser plumb bob to
metal track
• Built in bumper sensor alerts user if laser has
been bumped
• Cross hair beam pattern helps user find center
of beam
• Wireless (IR) remote control for single
person operation
• Digital laser detector detects rotary laser beam
over long distances
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• Digital laser detector extends interior and exterior range to 600’
LASER LEVELS
20X BUILDERS LEVEL PACKAGE –
DEWEDW090PK
20X TRANSIT LEVEL PACKAGE –
DEWEDW092PK
26X AUTO LEVEL PACKAGE – DEWEDW096PK
• 20x magnification for
200’ + range
200’ + range
• Magnetically dampened
compensator
• Accuracy within 1/4”
per 100’
per 100’
300’+ range
• 360 degree horizontal circle with
vernier scale
• Transit capability allows user
to determine vertical angles
per 100’
• 360 degree horizontal circle with vernier scale
• Heavy-duty leveling base
• Protected leveling vial
• 360 degree horizontal circle
• Protected leveling vial
CONSTRUCTION GRADE ROD – DEWEDW0734
CONSTRUCTION TRIPOD – DEWEDW0736
• 13’ length for most common
applications
• Industry standard 5/8” x 11”
mounting threads, flat
head design
• Lightweight, durable aluminum
construction
• 4 telescoping sections
• Markings in feet/inches/8ths
• Scale on back side for quick overall
height measurements
• Quick release legs for fast &
easy setup
• Height 68” opened,
42” closed
• Lightweight, durable aluminum construction
• Pointed steel feet are stable on any terrain
• Built in strap for easy transport
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Remote control operated scan mode
148
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
20X SPEED LINE LEVEL – BERE54-190B
• Kit includes: tripod, rod,
hard shell carrying case
and allen wrench
• Kit includes: tripod, rod,
hard shell carrying case
and allen wrench
• Includes: level with 15 minute
horizontal circle, hard shell
carrying case and allen wrench
• Designed strictly
for leveling
• Designed for leveling,
plumbing, or running vertical lines
• For builders that require rough
angle turning and fine-tuning
adjustments
• Non-strip focus knob prevents breakage and lens damage
• Non-strip focus knob prevents
breakage and lens damage
• Built in sunshade reduces glare
• Large achromatic coated objective lens for a
sharp image
sharp image
sharp image
• Rubber eyepiece cap protects eyeglasses
• One-piece aircraft aluminum telescope
• Non-strip focus knob
prevents breakage and
lens damage
CONCRETE & MASONRY
20X ECONO TRANSIT LEVEL – BERE54-136K
MATERIAL HANDLING
20X ECONO LINE LEVEL – BERE54-135K
LIGHT EQUIPMENT
LASER LEVELS
• Sliding lock levers to lock telescope
20X SPEED TRANSIT LEVEL – BERE54-200B
20X SPEED TRANSIT LEVEL – BERE54-200K
• Level kit includes: tripod,
rod, hard shell carrying case
and allen wrench
• Transit level with 15 minute
horizontal circle, 1 degree vertical arc, hard shell carrying
case and allen wrench
• Transit level kit includes:
tripod, rod, hard steel carrying case and allen wrench
sharp image
• For builders that require rough
angle turning and fine-tuning
adjustments
• Non-strip focus knob prevents breakage and
lens damage
sharp image
22X MAGNUM TRANSIT LEVEL – BERE54-300K
• Transit level with 5minute horizontal circle,
1 degree vertical arc,
hard shell carrying
case, allen wrench and
plumb bob
• Transit level kit
includes: tripod, rod,
hard steel carrying
case, allen wrench and
plumb bob
• Designed with a heavy-duty dome shaped
head that holds a double ball bearing center,
giving the user 5-minute readouts
• Designed with a heavy-duty dome shaped
head that holds a double ball bearing center,
giving the user 5-minute readouts
lens damage
lens damage
sharp image
sharp image
• One- piece aircraft aluminum telescope
• Lightweight and durable
aluminum hinge, clamp and
shoe castings
• Hinges are attached with
screws, not rivets
• Heavy-duty poly webbing shoulder strap
• Electrostatically powder painted castings for a
durable and long lasting finish
SAFETY SUPPLIES
• For the serious builder
or contractor who
requires greater accuracy
• 63” open, 38” closed, 5/8” x
11 thread, flat head
GENERAL SUPPLIES
• For the serious builder
or contractor who requires greater accuracy
ALUMINUM TRIPOD-CONTRACTOR’S QUICK
CLAMP – BERS60-ALQC20
LANDSCAPING
22X MAGNUM TRANSIT LEVEL – BERE54-300B
HAND TOOLS
sharp image
• For builders that require
rough angle turning and finetuning adjustments
BITS, BLADES
& ABRASIVES
• For builders that require
rough angle turning and
fine-tuning adjustments
POWER TOOLS
20X SPEED LINE LEVEL – BERE54-190K
WORKWEAR
149
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
LASER LEVELS
ALUMINUM TRIPOD-CONTRACTOR’S QUICK
CLAMP – BERS60-ALQC21
ALUMINUM TRIPOD-QUICK CLAMP –
BERS60-ALQR20
ALUMINUM TRIPOD-QUICK CLAMP –
BERS60-ALQR25
• 63” open, 38” closed, 1/2” x
• 65” open, 42” closed, 5/8” x
• 65” open, 42” closed,
3-1/2” x 8 thread, flat head
• Lightweight and durable
aluminum hinge, clamp and
shoe castings
• Lightweight, heavy-gauge aluminum and the added stability
of double banded lets
• Lightweight, heavy-gauge aluminum and the added stability
of double banded lets
• Hinges are attached with
screws, not rivets
• Outstanding features include
positive locking clamps, powder painted wear resistant metal parts and
shoulder strap
• Outstanding features include
positive locking clamps, powder painted wear resistant metal parts and
shoulder strap
AUTOMATIC LEVEL – BERE57-LM30PKG
FIVE BEAM LASER – BERE58-MP5
• Includes: LM30 rotary
laser, ceiling mount,
laser detector, tripod and
telescoping rod
• Multi-mount, laser trivet,
target, strap, carrying case
and manual
• Heavy-duty poly webbing shoulder strap
• Electrostatically powder painted castings for a
durable and long lasting finish
AUTOMATIC ELECTRONIC SELF LEVELING
ROTARY LASER – BERE57-LMHCUPK
• LMH series package
includes, detector, tripod,
rod and carrying case
• Self leveling via
electronic sensors interfaced with motors
BITS, BLADES
& ABRASIVES
• Single beam, anti drift system, no bubble
required, low battery indicator
• One button leveling,
plumbing, and alignment;
indoor/outdoor suitability
• Heavy-duty glass enclosed beacon
• Variable speed rotation plus spot mode and
“one person” operation
• Pro grade
• Level and plumb beams are standard
• Five independent self
leveling highly focused
laser beams
• Low power indicator
• Out of level indicator
• Chalk line “point and shoot” sweep modes
• LED mode indicator
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• Protected level vials prevent damage and
shield vials from the sun to prevent misreads
GAMMON REEL – BERS11729
K & E TYPE 2X HAND LEVEL – BERSB17-632
LOCKE HAND LEVEL – BERS17-620
• 6” long draw eyepiece extending to 7-1/2”
• 5” long square sighting tube with fixed
eyepiece and a
durable yellow finish
• All brass construction
• This can be used as a bench level
• Adjustable reflector and internally mounted
bubble assembly
• When supported on a staff, it is sufficiently
accurate for running levels in gardening or
brick lines
• 12’
• An aid to set up
and deploy a clean,
accurate plumb
• Slip the reel into your palm and draw the
bob to desired position and stop with
finger pressure
• Steel clock spring zips the string back into
the case
MAGNETIC LOCATOR – BERS19-557
ROUND HAND LEVEL – BERSB17-624
TELESCOPING ALUMINUM RODS –
BERS06-804M
• Magna-Trak 102, soft case
• 6” long hand level
• 4m 4 section, metric dm, cm, 2mm
• Push button “erase” feature gives
greater flexibility and performance
is enhanced
• Brass construction, a
fixed eyepiece and an externally mounted
bubble assembly
• Made of light, durable aluminum alloy
• Power line indicator feature
• Body is electrostatically powder painted bright
safety yellow
• LCD panel visually indicates that a
power line is present
• Hexagonal objective cap prevents rolling
• Anodized sections are imprinted with
special weather resistant and corrosion
resistant inks
• Tight tolerances on extruded aluminum
sections allow for smooth extension
• Sectional joints are injection molded
for a durable, lightweight, impact resistant plastic
WORKWEAR
• Rods are equipped with reliable and
wear resistant polycarbonate buttons that lock
each section
150
• Easy-to-read graduations and a special measuring scale on the backside permit users to
read height at eye level
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
• 13’ 4 section, ft/in/8ths
• 16’ 5 section, ft/in/8ths
• Made of light, durable, aluminum alloy
resistant inks
resistant inks
resistant inks
• Rods are equipped with reliable and wear
resistant polycarbonate buttons that lock
each section
each section
each section
TELESCOPING FIBERGLASS RODS –
BERS06-725A
TELESCOPING FIBERGLASS RODS – BERS06725C
• 25’ graduated feet/10ths
• 25’ graduated feet/inches
• Rugged oval shaped rods,
waterproof, corrosion resistant
and non conductive
• Rugged oval shaped rods,
waterproof, corrosion resistant
and non conductive
• Feature an abrasive resistant coating
with special reinforcement ribs to
stop breakage and add stability
• Feature an abrasive resistant coating
with special reinforcement ribs to
stop breakage and add stability
• Easy to read graduations and a
special measuring scale on the backside permit users to read height at
eye level
• Easy to read graduations and a
special measuring scale on the backside permit users to read height at
eye level
• Rods are equipped with reliable and unbreakable buttons that lock each section
• Rods are equipped with reliable and unbreakable buttons that lock each section
BITS, BLADES
& ABRASIVES
• 13’ 4 section, ft/10ths/100ths
HAND TOOLS
• Full, self-leveling, 360 degree
line of reference
• Full, self-leveling, 360 degree
line of reference
• One button set
up for indoor-outdoor applications
• One button set
up for indoor-outdoor applications
• Compact, bright, durable tool has non-complicated features or multiple knob adjustments
• Compact, bright, durable tool has non-complicated features or multiple knob adjustments
• Includes wall bracket and carrying case
• Includes wall bracket, carrying case and
lD detector
HAND HELD LASER LEVEL – PLSS3
• Provides point-to-point
alignment information
• Plumbs instantly from
floor to ceiling or from
50’ off the ground
• Self-leveling, turn it on and go to work
• Includes wall bracket, handsome carrying
pouch and floor stand
GENERAL SUPPLIES
360 DEGREE LASER LEVEL WITH LD
DETECTOR – PLSS360E
LANDSCAPING
LASER LEVELS
360 DEGREE LASER LEVEL – PLSS360
POWER TOOLS
TELESCOPING ALUMINUM RODS – BERS06816C
CONCRETE & MASONRY
BERS06-813C
MATERIAL HANDLING
BERS06-813
LIGHT EQUIPMENT
LASER LEVELS
SAFETY SUPPLIES
WORKWEAR
151
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
LASER LEVELS
HAND HELD LASER LEVEL – PLSS5
LASER DETECTOR TOOL – PLSS5XD
• Provide point-to-point
alignment information
• ???
• Plumbs instantly from
floor to ceiling or from
50 feet off the ground
PLUMB, LEVEL AND SQUARE HAND HELD
LASER LINE TOOL – PLSS2
• Check existing conditions before you submit your bid
• Lay out all your alignment tasks with the PLS2
in the palm of your hand
• Compatible with your camera tripod and
includes wall bracket and handsome
carrying pouch
• Self-leveling, turn it on
and go to work
• Includes magnetic wall bracket, pendulum
layout target, floor stand, and handsome
carrying pouch
• Fast, accurate and portable
PROFESSIONAL EXTERIOR ALIGNMENT TOOL
– PLSS5X
• Designed for layout
of control points and
lines in outdoor conditions, especially in
bright sunlight
• Working range is 250+
feet with an accuracy
of 1/8” at 100 feet
• Lays out conduit, anchors bolts and squares
on a slab
• Eliminates time consuming set up of infrared
rotary lasers
HAND TOOLS
• Laser receiver sold separately
PLUMB BOBS
BRASS PLUMB BOBS
• SNDS40 – 24 oz.
• SNDS41 – 16 oz.
• Solid brass engineer plumb bob
• Comes with a solid brass removable cap, and
hardened steel replaceable tip
LEVELS
MAGNETIC TORPEDO LEVEL – KTLS930-9
RARE EARTH MAGNET TORPEDO LEVEL –
KTLS931-9RE
• 9”
• 9”
• Magnetized strip on bottom
• Powerful rare earth magnets hold firmly to
iron and steel surfaces
• Yellow vials for easy viewing
• Rare earth magnets are up to 5 times stronger
than strip magnets
• Yellow vials framed with E-Z SEE glow-inthe-dark material for easier viewing in dimly
lit areas
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• SNDS43 – 8 oz.
152
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
MAGNETIC TORPEDO LEVEL – SNDSSC-50M
• 3” aluminum line
level
• 9” cast aluminum,
3 vial
MAHOGANY I-BEAM LEVEL
• SNDSMA-24 – 24”, 6 vials
• SNDSMA-48 – 48”, 6 vials
• Special alloy aluminum extruded I-beam laminated with carefully selected mahogany uniformly kiln dried
• Solid set, “Cat’s Eye Yellow” vials to insure
permanent built-in accuracy
• One hang hole for storage, two large
hand holes
CONCRETE & MASONRY
• Thoroughly seasoned and air-dried before and
during manufacture
MATERIAL HANDLING
ALUMINUM LINE & SURFACE LEVEL –
SNDSSC-55
LIGHT EQUIPMENT
LEVELS
• Shock absorbing protective end caps
• All vial openings have protective glass lenses
PROFESSIONAL BRASS BOUND MAHOGANY
LEVELS – SNDS12AB-48
PROFESSIONAL MAGNETIC EXTRUDED ALUMINUM LEVELS
• SNDSHD-24 – 24”, 6 vials
• 48”, 6 vials
• SNDSPML-24 – 24”, 3 vials
• Made using carefully selected, uniformly kiln
dried mahogany
• SNDSPML-48 – 48”, 3 vials
during manufacture
• Strong, lightweight
• Made of special alloy extruded aluminum
• Made with adjustable bent glass “Cat’s Eye
Yellow” vials
• Dipped in wood preservative, double spray
sealed, and have a force dried moisture resistant lacquer finish
• Frame is painted “Contractor Red” with the
working surface not painted, but furnished
with a machined finish
• This level has beautiful, perfect fit, angle-type
brass binding on all edges
• Solid set, “Cat’s Eye Yellow” vials insure permanent built-in accuracy, two large hand
holes, one hang hole for storage
• Shock absorbing end caps
• Comes with replaceable solid set
acrylic roto vials to ensure permanent
built-in accuracy
• Bottom working surface has a full length magnetic strip that will hold the level in place
when placed against a metallic surface
• Top reading window for the level vial
• Has shock absorbing protective caps, and a
baked on black finish
• 24”, 4 vials
• Carefully selected mahogany uniformly
kiln dried
sealed, and have a force dried moisture resistant lacquer finish
SAFETY SUPPLIES
during manufacture
GENERAL SUPPLIES
QUALITY MAHOGANY CARPENTER LEVEL –
SNDS118-24
LANDSCAPING
• Shock absorbing protective end caps
• Made of special alloy extruded aluminum
HAND TOOLS
• Frame is not only strong, but light in weight
BITS, BLADES
& ABRASIVES
PROFESSIONAL ALUMINUM EXTRUDED
LEVELS
POWER TOOLS
sealed and have forced dried moisture resistant lacquer finish
• Large glass solid set, “Cat’s Eye Yellow” vials,
to insure permanent built-in accuracy
WORKWEAR
153
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
LEVELS
BOX FRAME LEVEL – STBS37416
• 16”
• 24”
• 48”
• Crystal clear vials readable in any direction
with no change in accuracy tolerance, guaranteed for life
• Spring steel hairline indicators in vials
• Best frame strength-to-weight ratio
• Removable endcaps for scribing in corners
and for reading tight header and sill openings
• Rubber endcaps grip walls and do not
leave marks
leave marks
leave marks
• Metal hang hole for storing level on site
• Large comfortable rubber handle holes
• Fast and accurate installations
TORPEDO LEVEL WITH ADJUSTABLE VIAL –
STBS21999
• 78” & 32” Jamber Set
• Type 70TMW
• Reads plumb, level, and 360 degrees
• Protractor vial reads in 2 degree increments
• Patented epoxy locked vial system never
needs adjusting
leave marks
• Protractor vial (tolerance +/- .5 degrees) duplicates angles in percent or degrees
• Full length magnetic strip recessed in the
measuring surface
• Two crystal clear, non-fogging, unbreakable,
monoblock, acrylic vials
• Certified fixed vial accuracy: (1/16” over 72”)
• Level accuracy guaranteed for life; vials will
never fog, leak or require adjustment
GENERAL SUPPLIES
SQUARE
12” COMBINATION SQUARE – STNS46123
working surface
• High visibility yellow,
die cast handle
• Rust-resistant for blade longevity
• Scriber for easily marking surfaces
• Easy read vial
• Brass hardware
WORKWEAR
SAFETY SUPPLIES
• Durable etched, hard chrome plated blades
154
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
COMBINATION SQUARE – SNDSCS-2
RAPID SQUARE – SNDSRS-45
• 16” x 24”
• 12”cast iron head
• 7”with manual
• Polished steel
• Has a level vial in the
head of the square
• Made of special alloy
aluminum to assure
many years of
dependable service
• All graduations and
rules are permanently etched and are a
contrasting color
• Steel scribe
• Solid brass knurled thumb screw
for adjustment
• Easy-to-read permanent graduations
MATERIAL HANDLING
CARPENTER SQUARE – SNDSSC-1P
LIGHT EQUIPMENT
SQUARE
• Steel blades
CONCRETE & MASONRY
• Easy-to-read permanently etched graduations
SQUARE
30’ POWER RETURN TAPE MEASURE –
KTLS916-30RE
• Rare earth magnetic
tip sticks to iron and
steel surfaces for
simple one-person
measurements
• Rare Earth magnetic tip
sticks to iron and steel
surfaces for simple oneperson measurements
• Comfortable, non-slip rubber jacket for easy
gripping case
• Convenient two-step lock button-1st step
slows retraction of the blade; 2nd step holds
the blade securely
• 1” wide blade, oversized, bold black numbers
for easy readings, red stud markings
• Comfortable, non-slip rubber jacket for easy
gripping case
• Thick rubber jacket protects case against
fall impacts
BITS, BLADES
& ABRASIVES
• Thick rubber jacket protects case against
fall impacts
POWER TOOLS
25’ POWER RETURN TAPE MEASURE –
KTLS916-25RE
• Convenient two-step lock button-1st step
slows retraction of the blade; 2nd step holds
the blade securely
• 1” wide blade, oversized, bold black numbers
for easy readings, red stud markings
HAND TOOLS
MEASURING TOOLS
ENGINEERS WOOD END RULE – LUFS1066DM
• 6’ red end
• 6’ heavy-duty, red end
• 6.5’ engineers scale
• Graduated in feet,
1/10ths and 1/100ths
of feet
• Graduated in feet,
1/10ths and 1/100ths
of feet
• Graduated in millimeters and feet, 1/10ths
and 1/100ths
• Red foot figures
• Regular outside markings
• Regular outside markings in feet, inches and
1/16ths
• Fits easily into most tape holsters
• Has inside markings; numbering begins on
inside of rule; measurement
• Decimal points on engineer’s scale prevent
reading errors
• Bright yellow blade has clear, easy-to-read
numerals
• Toggle lock positioned for convenient
operation
• Cushioned blade return, removable belt clip
GENERAL SUPPLIES
ENGINEERS WOOD END RULE – LUFS1066D
LANDSCAPING
ENGINEERS WOOD END RULE – LUFS066D
SAFETY SUPPLIES
WORKWEAR
155
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
MEASURING TOOLS
FLAT READING WOOD END RULE – LUFS066F
100’ STEEL TAPE – LUFS100
LINEAR FIBERGLASS TAPE MEASURE –
LUFS1707D
• 6’ red end
• 3/8” x 100’ Hi-Viz
orange
• 1/2” x 150’, Hi-Viz
orange engineers
• Graduated to 1/16ths both edges; 16” stud
centers marked in red
• High impact polystyrene case, Hi-Viz
orange
• Lightweight open reel
is easy to handle and
rewind
• Easy to wind nylon drum
• Yellow clad blade .005” thick
• C2 blade style
• Easy to read black and red markings
• Hook ring is retained neatly in the contoured
mouth of the case
• Bright yellow blade has clear easy-to-read
numerals
• Removable belt clip
operation
• Marked both sides,
both edges
LINEAR FIBERGLASS TAPE MEASURE
TAPE MEASURE – LUFS50
• LUFS1708 – 1/2” x 200’,
Hi-Viz orange
• 3/8” x 50’
• 1/2” x 50’
• Hi-Viz universal
lightweight long
steel tape
• Hi-Viz linear
fiberglass tape
• LUFS1709 – 1/2” x 300’,
Hi-Viz orange
• High impact
polystyrene case,
Hi-Viz orange
• C1 blade style
• Lightweight high
impact ABS case
• Durable 1/2” wide fiberglass tape is encapsulated in flexible plastic
• Durable 1/2” wide fiberglass tape is encapsulated in flexible plastic
• Non-conductive, easy to read black, red markings, yellow background
• Non-conductive, easy to read black, red markings, yellow background
• Lightweight high impact ABS winding drum
for smooth tape recovery
• Lightweight high impact ABS winding drum
for smooth tape recovery
• Blaze orange case
• Blaze orange case
• 1/2” x 60’
• 3/4” x 12’
• 3/4” x 16’
• Hi-Viz linear
fiberglass tape
• Series 1000,
power return
• Series 1000,
power return
• Lightweight high
impact ABS case
• Case designed to
fit perfectly in the hand
fit perfectly in the hand
• Lightweight, high strength case
numerals
numerals
numerals
operation
operation
operation
• Virtually unbreakable quad hook; four rivets
for extra strength
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Lightweight open reel is
easy to handle and rewind
156
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
TAPE MEASURE – LUFS1425D
TAPE MEASURE – LUFS1049CME
• 1” x 25’
• 1” x 25’ engineers
• 1” x 30’
• Series 1000,
power return
• Series 1000,
Power Return
• Series 1000,
power return
• Case designed to fit
perfectly in the hand
fit perfectly in
the hand
• Regular outside markings in feet, inches
and 1/16ths
• Decimal points on engineer’s scale prevent
reading errors
operation
• Virtually unbreakable quad hook; four rivets
for extra strength
• 3/4” x 16’
• 3/4” x 25’
• 1” x 30’
• Series 2000, power
return tape
return tape
return tape
• Yellow clad blade
.005” thick
numerals
operation
• Easy wind nylon drum
• Easy to read black and red markings
numerals
operation
• Virtually unbreakable quad hook
• Hook ring is retained neatly in the contoured
mouth of the case
• Removable belt clip
TAPE MEASURE – LUFS2133D
TAPE MEASURE – LUFSHV1425
• 1” x 33’
• 1” x 33’ engineer’s
• 1” x 25’
return tape
return tape
• Hi-Viz series 1000,
power tape
• Hi-Viz orange case,
designed to fit perfectly in the hand
• Fits easily into most
tape holsters
numerals
numerals
operation
operation
GENERAL SUPPLIES
LANDSCAPING
operation
HAND TOOLS
numerals
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
numerals
MATERIAL HANDLING
LIGHT EQUIPMENT
MEASURING TOOLS
SAFETY SUPPLIES
WORKWEAR
157
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
MEASURING TOOLS
TAPE MEASURE – LUFSHV1425D
TAPE MEASURE – LUFSHV1048CM
TAPE MEASURE – LUFSHY1048CME
• 1” x 25’ engineers
• 25mm x 8m
• 1” x 26’
power tape
power tape
• Hi-Viz yellow power
return tape
• Hi-Viz yellow case,
numerals
numerals
operation
operation
numerals
operation
TAPE MEASURE – LUFSHV1430
TAPE MEASURE – LUFSHY1430
TAPE MEASURE – LUFSHY1730CME
• 1” x 30’
• 1” x 30’
• 1/2” x 100’
power tape
• Hi-Viz yellow power
return tape
• Hi-Viz orange fiberglass
linear tape
• Hi-Viz orange case, designed
to fit perfectly in the hand
• Hi-Viz yellow case,
• Line does not collect dirt
in case
• Lightweight, high
strength case
• Lightweight open reel is easy to handle
and rewind
numerals
• Hi-Viz orange case
• Patented end hook lasts
10 times longer than
ordinary end hooks
• Non-slip toggle lock allows complete control
of power tape blade
operation
• Rubber cushion shell protects tape from
impact and improves grip
LANDSCAPING
HAND TOOLS
• Compact size for comfort and easy storage,
removable belt clip
TAPE MEASURE – LUFSPS3425
TAPE MEASURE – LUFSQR1425
TAPE MEASURE – LUFSSV125
• 1” x 25’
• 1” x 25’
• 1” x 25’
• Pro series 3000
power return tape
• Quikread power
return tape
• Ultralok power return
Hi-Viz tape
• Ny-clad blade coating extends blade life
5 times longer than standard
• Graduations printed
in fractions and decimal equivalents
• Slide lock for easy
blade locking at any length
• Rounded blue case fits your hand for comfort
• Self compensating end hook for inside and
outside measurements
• Patented quad hook extends blade life
• Built in bumper reduces shock upon blade
retraction
• Hi-Viz orange
• Durable ABS case withstands rugged use on
the job site
• Built in bumper reduces shock when blade is
retracted
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Positive toggle lock holds blade securely at
any length
• Self compensating end hook for inside and
outside measurements
158
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
MEASURING TOOLS
NYLON CLAD STEEL MEASURING TAPE
MATERIAL HANDLING
• BERS82-10080B – 100’,
ft/in/8ths, type B end
• BERS82-20080B – 200’,
ft/in/8ths, type B end
• Open reels feature new
rubber reinforced, rounded design, large soft
rubber grip handle
• 1/2” width
CONCRETE & MASONRY
• Accurate, wear resistant graduations
• Flexible high tempered steel tape core
• Crank handle folds flat to prevent breakage
MEASURING WHEELS
415 SERIES MEASURING WHEEL – ROLS415
• Measures in meters, 100,000
counter limit
• Measures in feet, 100,000
counter limit
• Measures in feet, inches, tenths
• Paved and unpaved roads, lumber centers, landscaping, construction, fencing
• Construction, utilities,
cable, telecommunications,
land surveying
• Heavy-duty construction, paved
unpaved gravel roads, main
extensions, utility installations,
trailblazing, engineering
• 5 digit ratchet counter
• 5 digit ratchet counter
• Solid steel disk wheel
• Calibrated wide rubber wheel
• 4 foot circumference wheel
• Measurement units on disk circumference
• Safety-glo color
• Wheel stand
• 5 digit steel counter
• Insert and lock handle
• Wheel brake
• Wheel stand
MEASURE MASTER MM12 MEASURING
WHEEL – ROLSMM12RP
MEASURE MASTER MM12 TWIN MEASURING
WHEEL – ROLSMM-12TWINRP
• Measure in meters, decimeters,
centimeters
• Measures in feet, inches, tenths,
10,000 feet counter limit
• Heavy-duty construction, paved
and unpaved gravel roads, main
extensions, utility installations,
trailblazing and engineering
• Indoor construction,
accident/crime scenes,
janitorial, appraisals
• Measures in feet, inches,
counter type single, 10,000’
counter limit
• Wide, precision molded tire
• Solid steel disk wheel
• Measurement units on disk circumference
• Molded polycarbonate 5
digit counter
• 5 digit steel counter
• Safety green color
• Molded polycarbonate 5 digit counter
• Wheel stand
• Telescoping handle
• Lightweight and compact
• Janitorial, home interior
dimensions, appraisals,
accident/crime scenes,
landscaping, roofing
LANDSCAPING
415 SERIES MEASURING WHEEL – ROLS415M
HAND TOOLS
• Wheel brake
BITS, BLADES
& ABRASIVES
400 SERIES MEASURING WHEEL – ROLS400
POWER TOOLS
300 SERIES MEASURING WHEEL –
ROLS300RP
• Dual wheel configuration
• Brass axle bushings
GENERAL SUPPLIES
• Wide, precision molded tire
• 3-piece telescoping handle
SAFETY SUPPLIES
WORKWEAR
159
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
MEASURING WHEELS
WHEEL – ROLSMM30M
WHEEL – ROLSMM30RP
PROMARKER 400 MEASURING AND MARKER
WHEEL – ROLS400PM
• Measures in meters, decimeters, 10,000 meter counter limit
• Measures in feet, inches,
10,000 feet counter limit
• Measures in feet, 100,000
counter limit
• Accident/crime scenes,
general construction,
home/yard measurements,
paved roadwork, fencing
• Accident/crime scenes,
general construction,
home/yard measurements,
paved roadwork, fencing
• Road construction,
telecommunications,
utilities, cabling
• Silver powder coat steel wheel
• Silver powder coat steel wheel
• 5 digit counter
• 4 foot circumference wheel
digit counter
digit counter
• Wheel stand
• 3 foot/1 meter circumference
• 3 foot/1 meter circumference
• Wheel stand
• Wheel stand
LANDSCAPING
• Wheel brake
• Marking wand with stand (patent pending)
MIRRORS
INSPECTION MIRROR
INSPECTION MIRROR – PTOS2372
MAGNETIC RETRIEVING TOOL – PTOS2375
• PTOS2370 – 7-1/2”, circular
• 10” - 14”, circular
• 16-3/4” - 26-3/4” telescoping
• PTOS2371 – 8-3/4”, oval
• Versatile all angle ball joint
• Versatile telescoping handle
• PTOS2374 – 8” circular
• Telescoping handle
• All angle ball joint
• Lifting strength over 1.5 lbs.
• Versatile all angle ball joint
MULTIPURPOSE TOOLS
LONG NOSE MULTIPURPOSE TOOL –
KTLS1010
GENERAL SUPPLIES
MULTIPURPOSE TOOL – KTLS1002
• Easily cuts and
strips wire
• Narrow, serrated plier nose to pull, loop and
bend wire
• Crimps insulated and
non-insulated terminals,
lugs, and splices
• Crimps 7mm ignition and distributor terminals
• Long, curved cutting blade
• Easily cuts and strips wire
• Cutters and strippers are in front of the pivot
for maximum ease of use in reaching into
tight places
• Cleanly shears bolts
• Crimps insulated and non-insulated terminals
and 7 to 8 mm ignition terminals
• Wire cutter nose
• Plastic covered cushioned handles for comfort
• Cleanly shears bolts
WORKWEAR
SAFETY SUPPLIES
• Plastic covered cushioned handles for comfort
160
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
NUT DRIVER
NUT DRIVER – CRES700-11/32V
• Series 1500
• CRES700-1/2V –
1/2”-red
• Series 1500
• CRES700-1/4V – 1/4”-red
• Precision machined case-hardened socket,
bright plated, polished finish
• 1/4”-1/2”
• Precision machined casehardened socket, bright
plated, polished finish
• Series 1500
• Color coded butyrate handle
• Full hollow steel shaft
• Reusable plastic pouch
• Series 1500
• Series 1500
• 3/8”-blue
• 5/16”-amber
POWER TOOLS
CONCRETE & MASONRY
• 11/32”-green
MATERIAL HANDLING
NUT DRIVER SET-7 PC – CRES700P
LIGHT EQUIPMENT
NUT DRIVERS
NUT DRIVERS
NUT DRIVER
• Contains 3/16”, 1/4”,
5/16”, 11/32”, 3/8”, 7/16”,
and 1/2”
• KTLS646-1/2 –
1/2” x 6” hollow shank
• Full hollow shafts facilitate
work on stacked circuit
boards or other long bolt applications
• KTLS646-3/8 – 3/8” x 6” hollow shank
• Internal flanges provide solid, twist resistant
shaft anchor
• Cushion grip handle allows for greater torque
and comfort
• Full hollow shafts facilitate work on stacked
circuit boards or other long bolt applications
• Internal flanges provide solid, twist resistant
shaft anchor
• Premium chrome plated for smooth feel and
corrosion resistance
and comfort
LANDSCAPING
• Meets or exceeds applicable ASME/ANSI
specifications
HAND TOOLS
BITS, BLADES
& ABRASIVES
7 PIECE NUT DRIVER SET – KTLS647
specifications
BARREL TYPE DRIFT PINS – WOOS11486
• Used to line up steel
for erection work
• Used to line up steel
for erection work
• 1-1/4” stock
• 1-1/16” stock
• 12” in length
SAFETY SUPPLIES
BARREL TYPE DRIFT PINS – WOOS11480
GENERAL SUPPLIES
PINS
WORKWEAR
161
PINS
BROAD HEAD BULL PIN
STANDARD BULL PIN – KTLS3252
STANDARD BULL PIN – KTLS3259
• KTLS3255 – 1-1/4” x 13”
• 1-3/16” x 15”
• 1-5/16”
• KTLS3256 – 1-1/16” x 10”
• Machined from quality
alloy steel
• Machined from quality
alloy steel
• Standard design offers greater initial economy,
but no added protection against mushrooming
• Standard design offers greater initial economy,
but no added protection against mushrooming
• Heat treated for strength
• Heat treated for strength
• Forged, heat treated bull pin increases efficiency by providing a larger striking surface
• Head design also reduces chance of pin slipping from the hand when aligning holes
• Angled head and smooth blending of radii
increase strength and reduce the danger
of chipping
• Black finish for rust resistance
• Below the head, square off shoulders have
been forged to provide a surface for applying
wrench to loosen wedged bull pins
• Black finish for rust resistance
PIPE WRENCHES
CHAIN WRENCH – RIDS31310
CHAIN WRENCH – RIDS31320
• 2”, 4” pipe capacity
• 4-1/2”, 7-1/2”
pipe capacity
• Light-duty; one
pipe forged alloy
steel handle and jaw
OFFSET PIPE WRENCH-ALUMINUM –
RIDS31120
• Heavy-duty; has
replaceable alloy steel jaws
• 50% lighter than
comparable cast iron
models of the same size
• Double jaw gives fast, ratchet like action in
either direction
• Double jaw gives fast, ratchet like action in
either direction
• Jaw opening parallel to the handle and a narrower hook jaw head
• Ideal for use in close quarters
• Ideal for occasional use as a hammer
OFFSET PIPE WRENCH-ALUMINUM –
RIDS31125
RAP WRENCH – RIDS31395
STRAIGHT PIPE WRENCH
• 18”, 2-1/2”
pipe capacity
• 10”, 1-1/2”
pipe capacity
• RIDS31000 – 6”, 3/4”
pipe capacity
comparable cast iron models of the same size
• Has a deeper and
broader hook jaw housing
• RIDS31005 – 8”, 1” pipe capacity
• Jaw opening parallel to the handle and a narrower hook jaw head
• Provides smooth, flat surface
• Fold away reamer
• Ideal for use in close quarters
• Made from high strength zinc alloy
• RIDS31025 – 18”, 2-1/2” pipe capacity
STRAIGHT PIPE WRENCH-ALUMINUM
STRAIGHT PIPE WRENCH-ALUMINUM –
RIDS31110
• RIDS31090 – 10”,
1-1/2” pipe capacity
• 40% lighter than comparable cast-iron models
of the same size
comparable cast-iron models of the same size
• I-beam handle with full floating forged
hook jaw
hook jaw
• Sturdy, cast-iron housing
• Nonstick adjustment nut
• Replaceable hook and heel jaws
hook jaw
• Nonstick adjustment nut
• Replaceable hook and heel jaws
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
162
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
PIPE WRENCHES
HEAVY-DUTY PIPE WRENCH – PTOS824HD
• PTOS806HD – 3/4” x 6”
• 4” x 24”
• PTOS808HD – 1” x 8”
• PTOS810HD – 1-1/2” x 10”
• Forged steel jaw
provides maximum strength
• PTOS812HD – 2” x 12”
• Full floating hook jaw provides instant grip
MATERIAL HANDLING
HEAVY-DUTY PIPE WRENCH
• PTOS814HD – 2” x 14”
• PTOS818HD – 3-1/2” x 18”
CONCRETE & MASONRY
• Forged steel jaw provides maximum strength
• Full floating hook jaw provides instant grip
• Large knurl and power threads
PLIERS
COMBINATION SLIP JOINT PLIERS
• 7” & 10” curved jaw
• 5”, 7”, 10” curved
jaw – 6”, 9” long nose
• CRESH26V – 6-1/2”
Cee Tee Co
• Maximum jaw opening per
ASME specs
• World famous
Crescent brand
• CRESH28V – 8-1/2”
Cee Tee Co
• Patented angled tooth pattern
for better grip
• Maximum jaw opening
per ASME specs
• Designed for gripping and turning
round objects such as pipes, rods and pins
locking grip
• Curved jaws combination with machined gripping teeth and wire cutter
locking grip
• Forged carbon steel and accurately machined,
hardened and tempered
• Long nose with wire cutter gets to hard to
reach spots
• Bright, plated finish
• Versatile curved jaw also features integral
wire cutter
• Knurled handles
DIAGONAL CUTTING SOLID JOINT PLIERS –
CRES542-7CV
LONG NOSE LOCKING PLIERS WITH WIRE
CUTTER
• CRESC5CV – 5”
curved jaw
• 7”
• CRESC6NV – 6”
long nose
• CRESC7CV – 7” curved jaw
• CRESC10CV – 10” curved jaw
• CRESC9NV – 9” long nose
• Made of forged alloy tool steel
• Polished head
• Red non-slip cushion handle grips
• Compound action for powerful non slip locking grip
locking grip
wire cutter
• Long nose with wire cutter gets to hard to
reach spots
GENERAL SUPPLIES
• Electronically induction hardened, durable and
keen side cutting edges
LANDSCAPING
CURVED JAW LOCKING PLIERS WITH WIRE
CUTTER
HAND TOOLS
wire cutter
• Designed for heavyduty wire cutting
BITS, BLADES
& ABRASIVES
5 PIECE LOCKING PLIER SET – CRESCLP5SET
POWER TOOLS
2 PIECE LOCKING PLIER SET – CRESCLP2SET
SAFETY SUPPLIES
WORKWEAR
163
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
PLIERS
SIDE CUTTING SOLID JOINT PLIERS –
CRES50-8CV
STRAIGHT JAW LOCKING PLIERS
• 8-5/16”
• CRESC10SV –
10” straight jaw
• Designed for
electrical work
• Electronically induction hardened, durable and
keen side cutting edges
• CRESC7SV – 7”
straight jaw
THIN BENT NOSE COMBINATION SLIP JOINT
PLIERS – CRESJ26CV
• 6”, cushion grip
• Designed for gripping
and turning round objects
• 30 degree bent nose combination, machined
gripping teeth & wire cutter
• Made of forged alloy tool steel
• Polished head
• Accurately machined, hardened and tempered
• Spring tempered handles with red non-slip
cushion grip handles
• Bright, polished steel with chromium plating
locking grip
TONGUE AND GROOVE PLIERS-CUSHION GRIP
• CRESR210CV – 10”
cushion grip
• CRESR212CV – 12” cushion grip
• CRESR27CV – 7” cushion grip
• Designed to grip all shapes like rods, pipes
and cable connections
BITS, BLADES
& ABRASIVES
• Precision milled ribs for smooth, positive
interlock between two halves
• No change of halves separating or jumping
out of grooves
• Straight jaws and self locking jaw adjustment
LANDSCAPING
HAND TOOLS
• Forged, hardened and tempered
PLIERS
ANGLED HEAD DIAGONAL CUTTING PLIERS –
PTOS210AHG
BENT NOSE NEEDLE NOSE PLIERS –
PTOS225G
C-CLAMP LOCKING PLIERS – PTOS265R
• 8-1/8”
• 6-5/16”
• 6”
• Angled head for work
in confined areas
• Nose bent to 78
degree angle to reach
around obstructions
• Wide opening jaws
• Flush cutting
• Very thin nose allows access into minimum
clearance areas
• Heat treated alloy steel
• Adjusting screw provides precise pressure
• Guarded release trigger
• Plastisol grips for added comfort
C-CLAMP LOCKING PLIERS – PTOS266R
DIAGONAL CUTTING PLIERS
DIAGONAL CUTTING PLIERS – PTOS209G
• 11”
• PTOS206G – 6-1/16”
• 7-5/16”
• Wide opening jaws
• PTOS207G – 7-5/16”
• Heat treated
alloy steel
• Induction hardened
cutting edges
• Induction hardened
cutting edges
• Thin narrow jaws for access in tight areas
• Thin narrow jaws for access in tight areas
• 16” rolling head bar
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Diamond serrated jaws
164
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
END CUTTING PLIERS-HIGH LEVERAGE –
PTOS272G
• 7-25/32”
• 8-1/4”
• Wide, flat nose for
better grip than standard needle nose
• Semi flush cutting in
areas inaccessible to
side cutting pliers
• High leverage for easy cutting of most wires
and nails
LINEMAN’S PLIERS – PTOS267G
• 7-1/4” New
England style
• Slim rounded nose
toe provides easy access to restricted spaces
MATERIAL HANDLING
DUCKBILL PLIERS – PTOS227G
LIGHT EQUIPMENT
PLIERS
• Modified square open end
• Straight handle design helps prevent wrench
from cocking when struck
LOCKING PLIER-CURVED JAW – PTOS290R
LOCKING PLIER-CURVED JAW – PTOS292R
• 8-5/8” New
England style
• 7”
• 10”
• Curved jaw applies
pressure on all points of any style nut or bolt
• Curved jaw applies
pressure on all points of any style nut or bolt
• 15 degree angle heads
LOCKING PLIER-LONG BENT NOSE –
PTOS286LN
LOCKING PLIER-STRAIGHT JAW – PTOS291R
LONG EXTRA THIN NEEDLE NOSE PLIERS –
PTOS223G
• 6”
• 7”
• 6-5/32”
• Long nose design
for access in tight areas
• Straight jaw allows for
maximum contact on flat, square or hex work
• Extra slimnose
pliers for light
precision work
• Slim rounded nose
toe provides easy access to restricted spaces
POWER TOOLS
LINEMAN’S PLIERS – PTOS268G
CONCRETE & MASONRY
• Large striking surface
HAND TOOLS
• Designed for gripping, looping and twisting
wire in confined areas
BITS, BLADES
& ABRASIVES
MIDGET ANGLE NOSE PLIERS – PTOS235
NEEDLE NOSE PLIERS – PTOS220G
• 6-1/16”
• 4-1/16”
• 6-5/8”
• Very thin nose allows
access into minimum clearance areas
• Angled teeth provide
superior gripping power
• Precision milled undercut groove joint
NEEDLE NOSE PLIERS W/SIDE CUTTER –
PTOS226G
RETAINING RING PLIER-CONVERTIBLE TIP –
PTOS385
RETAINING RING PLIER-CONVERTIBLE TIP –
PTOS399
• 6-5/8”
• .070 0 degree tip
• .038 0 degree tip
• Meets ergonomics
criteria
• Converts from
internal to external
• Converts from
internal to external
• Induction hardened cutting edges
• Fixed tips are precision formed and
induction hardened
• Fixed tips are precision formed and
induction hardened
SAFETY SUPPLIES
GENERAL SUPPLIES
• Long handle for added leverage
LANDSCAPING
LONG THIN NEEDLE NOSE PLIERS –
PTOS222G
WORKWEAR
165
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
PLIERS
SHEAR TYPE WIRE CUTTER COMBINATION
PLIERS – PTOS278
• 8”
• External 1/4” to 2”
• Modified square
open end
• Internal 3/8” to 2”
PLIERS
END CUTTING PLIERS – KTLSD232-8
HEAVY-DUTY DIAGONAL CUTTING PLIERS –
KTLSD220-7
HIGH LEVERAGE DIAGONAL CUTTING PLIERS
– KTLSD2000-48
• 8”
• 7”
• 8”
• Wide throat clearance
for clean, even cutting of wire or nails at
close range
• Heavy-duty tapered
nose design
• Angled head design
for easy work in confined spaces
• One inch jaws easily reach into confined
spaces
• High leverage design – rivet is closer to the
cutting edge for 36% greater cutting and gripping power than other plier designs
• High leverage design provides greater cutting
power at the knives than other plier design
BITS, BLADES
& ABRASIVES
HAND TOOLS
• Plastic dipped handles for comfort and ease of
identification
• 2000 Series - heavy-duty cutting knives. Cuts
ACSR, screws, nails and most hardened wire
• Features combination polished and black
oxide finish
– KTLSD228-8
– KTLSD248-8
HIGH LEVERAGE IRONWORKERS PLIERS –
KTLSD213-9ST
• 8”
• 8”
• 9”
– rivet is closer to the cutting edge for 36%
greater cutting and gripping power than other
plier designs
• Angled head design
for easy work in confined spaces
• Twists and cuts soft
annealed rebar tie wire
• Induction hardened cutting knives for long life
• Hook bend handle
• Hot riveted joint ensures smooth action and
no handle wobble
• Spring loaded action for self opening
no handle wobble
LANDSCAPING
no handle wobble
• Short jaws and beveled cutting edges permit
close cutting of wire
GENERAL SUPPLIES
• Internal/external
replaceable tips
• Has two jaw
positions and shear type wire cutter
• Extended handles for longer reach and
increased leverage
identification
• Heavy-duty knurled jaws
HIGH LEVERAGE SIDE CUTTING PLIERS –
KTLSD2000-9NE
KTLSD213-8NE
KTLSD213-9NE
• Cuts ACSR, screws,
nails and most
hardened wire
• 8”
• 9”
plier designs
plier designs
• Streamlined design with sure gripping, cross
hatched knurled jaws
no handle wobble
no handle wobble
• 2000 Series – heavy-duty cutting knives. Cuts
WORKWEAR
SAFETY SUPPLIES
18 PC RETAINING RING PLIER SET – PTOS380
166
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
IRONWORKERS WORK PLIERS –
KTLSD2000-7CST
KTLSD2000-9ST
• Heavy-duty cutting
2000 Series
• 9” high leverage
• Cuts ACSR, screws, nails and most
hardened wire
• High leverage design. Rivet is closer to the
• 2000 series – heavy-duty cutting knives. Cuts
• High leverage design.
Rivet is closer to the cutting edge for 46%
plier designs
• Features combination polished and black
oxide finish
• 2000 Series – heavy-duty cutting knives
JOURNEYMAN HIGH LEVERAGE SIDE CUTTING
PLIERS – KTLSJ2000-9NE
PUMP PLIERS
• 7” side cutting pliers
• 9”
• KTLSD502-16 – 16”
• 2000 series cuts
• KTLSD502-6 – 6”
• High leverage design. Rivet is closer to the
• Spring loaded for self opening action
• KTLSD502-10 – 10”
• Secure tongue and groove design for non-slip
– even with heavy pressure
POWER TOOLS
KTLSD201-7CST
CONCRETE & MASONRY
• Streamlined design with sure-gripping, cross
• Spring-loaded action for self opening
MATERIAL HANDLING
KTLSHD2000-9NE
LIGHT EQUIPMENT
PLIERS
• Wide range of versatile jaw positions
BITS, BLADES
& ABRASIVES
• Streamlined design with sure-gripping, cross
handle wobble
• Features combination polished and black oxide
finish
STANDARD LONG NOSE PLIERS-SIDE
CUTTING
• 9” ironworker’s work plier
• KTLSD201-7NE – 7”
• KTLSD203-6 – 6”
• KTLSD201-8NE – 8”
• KTLSD203-7 – 7”
• KTLSD201-9NE – 9”
• KTLSD203-8 – 8”
• High leverage design –
rivet is closer to the cutting edge for 46%
plier designs
• Sure gripping, cross hatched knurled jaws
• Induction hardened, long lasting cutting knives
no handle wobble
• Knurled jaws for sure wrapping and looping
• Unique handle tempering helps absorb the
“snap” when cutting wire
GENERAL SUPPLIES
• Curved handles provide greater tool control
LANDSCAPING
SIDE CUTTING PLIERS
HAND TOOLS
SIDE CUTTING PLIERS – KTLS213-9ST
identification
PUNCHES
• For use in extremely
harsh work environments
• Two piece design allows the tip to be produced straighter to prevent binding
• One piece design with special tool steel alloy
• One piece design with special tool steel alloy
2 PC DRIVE PIN PUNCH – PTOS475/16X1/8
• 7/64”
WORKWEAR
1/8” SUPER-DUTY DRIVE PIN PUNCH –
PTOS48018
SAFETY SUPPLIES
PTOS48014
167
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
PUNCHES
2-PC DRIVE PIN PUNCH – PTOS471/2X1/4
• 3/32”
• 13/64”
• 15/64” punch tip
• Two-piece design allows the tip to be produced straighter to prevent binding
• Double pawl mechanism
PTOS48732
• 3/64”
• 5/64”
CENTER PUNCH
CENTER PUNCH – PTOS417/16
DRIFT PUNCH-LONG TAPER
• PTOS411/2 – 1/2”
• 17/16”
• PTOS961/2 – 1/4” tip
• PTOS411/4 – 1/4”
• Used in metal working layout
• PTOS961/4 – 3/32” tip
• PTOS413/8 – 3/8”
• Used for marking intersecting center lines
• PTOS963/4 – 3/8” tip
• PTOS415/16 – 5/16”
• PTOS963/8 – 3/16” tip
• PTOS965/16 – 1/8” tip
• PTOS965/8 – 5/16” tip
• Hole locations and pilot starting points
• For installing and removing pins and shafts
• Used to align holes in two or more pieces
of metal
HAND TOOLS
DRIFT PUNCH-LONG TAPER – PTOS967/16
LONG ALIGNING PUNCH – PTOS155/8
PUNCH AND CHISEL HOLDER – PTOS2108
• 7/32”
• 15-5/8 - 3/16” tip
• 8-1/2”
• For installing and removing pins and shafts
• Used for lining up holes in flanges, assemblies
and other mating parts
• Holds punches and
chisels up to one inch in diameter
• For removing long pins and shafts
• Nylon insert absorbs shock
SHEET METAL PRICK PUNCH
SHEET METAL PRICK PUNCH – PTOS445/16
STARTING PUNCH – PTOS501/2
• PTOS441/4 – 1/4”
• 5/16”
• 1/4”
• PTOS44-3/8 – 3/8”
• Similar to drift punches, wide points and heavier, shorter body
GENERAL SUPPLIES
LANDSCAPING
• Used to align holes in two or more pieces
of metal
• Hardened tapered handle aligns bolts and
rivet holes
• Openings are precision broached for proper fit
• Aligns holes in two or more metal sheets
WORKWEAR
SAFETY SUPPLIES
168
• 3/32”
• 1/16”
• 3/16”
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
LIGHT EQUIPMENT
PUNCHES
• 1/8”
• 7/32”
• Similar to drift punches, wide points and
heavier, shorter body
• Similar to drift punches, wide points and
heavier, shorter body
MATERIAL HANDLING
BACKING OUT PUNCHES – WOOS11496
• Blacksmith’s tool for
backing out bolts,
rivets and pins
• 5/8” punch diameter
POWER TOOLS
CONCRETE & MASONRY
PUNCHES
BITS, BLADES
& ABRASIVES
PUTTY KNIFE
• STNS28140 – 1-1/4”
• STNS28242 – 2”
• STNS28142 – 2”
• Steel blade hardened,
tempered and polished
• Full tang blade permanently fastened to shatter-resistant nylon handle
• Full tang blade permanently fastened to shatter-resistant nylon handle
SCRAPERS
RETRACTABLE RAZOR BLADE SCRAPER –
STNS28500
• Removes paint, glue, putty or
adhesives from glass, tile, walls,
floors or other smooth surfaces
• Full tang blade permanently fastened to shatter-resistant
nylon handle
GENERAL SUPPLIES
3” PLASTIC HANDLE WALL SCRAPER –
STNS28139
LANDSCAPING
PLASTIC HANDLE STIFF BLADE PUTTY KNIFE
• STNS28240 – 1-1/4”
HAND TOOLS
PLASTIC HANDLE FLEXIBLE BLADE PUTTY
KNIFE
• Blade retracts for safe storage
• Comes with 5 blades
SAFETY SUPPLIES
• Uses standard single edge
razor blades
WORKWEAR
169
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
SCREW EXTRACTORS
SCREW EXTRACTOR – PTOS9521
• 2-3/8”
• 3”
• 3-1/4”
• Drive into end of broken pipe or fitting
• Use tap holder or wrench to turn out
broken part
broken part
broken part
• Size stamped on extractor refers to drill bit
size to be used
• Size stamped on extractor refers to drill bit
size to be used
SCREWDRIVER BIT SETS
10 PC SCREWDRIVER INSERT BIT SET –
PTOS61901
38 PC POWER SCREWDRIVER INSERT BIT SET
– PTOS6222
• Popular bits in compact storage
box which doubles as a screwdriver handle
• Magnetic base provides
tool organization as well
as portability
• Bits are power tool rated
• Strong magnetic bond
• Can be used with cordless and
electric drills
• Bits stay organized on
any metal surface
HAND TOOLS
BITS, BLADES
& ABRASIVES
SCREWDRIVER BITS
1/4” HEX TORX SCREWDRIVER BIT –
PTOS6062AB
3/8” DR SCREWDRIVER BIT
3/8” DR SCREWDRIVER BIT – PTOS5246
• T40
• PTOS5240 – 5/16” x .040” standard
• 1/4” x .030” standard
• Reversing lever
designed for quick,
one hand operation
• PTOS5241 – #2 phillips
• Two piece design allows replacement
of worn bits
• PTOS5244 – 11/16” x .120” standard
• Reversing lever designed for quick,
one hand operation
LANDSCAPING
• Two piece design allows replacement
of worn bits
SCREWDRIVER SET
• Includes: three cabinet tip,
two phillips tip, and two keystone tip styles
• General purpose selection
of the most frequently
used screwdrivers
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
7 PIECE SCREWDRIVER SET – KTLS85076
170
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
#2 PHILLIPS RAPI-DRIVE SCREWDRIVER –
KTLS682-6
• Designed for confined
hard to reach applications
• Crank action handle spins
screws fast with one hand
• Two tip sizes for
added convenience
• Saves time and effort, especially on
longthreaded screws in switch plates,
light fixtures, etc.
CABINET TIP SCREWDRIVER
• KTLS601-6 – 3/16” x 6”
heavy-duty round shank
• KTLS601-8 – 3/16” x 8” heavy-duty round
shank
and comfort
• Patented Tip Indent quickly identifies the type
of screwdriver and tip orientation
specifications
KEYSTONE-TIP SCREWDRIVER
• KTLS605-4 – 1/4” x 4”
• KTLS600-4 – 1/4” x 4”
heavy-duty square shank
• KTLS602-4 – 1/4” x 4”
• KTLS605-6 – 1/4” X 6” heavy-duty
round shank
• KTLS600-6 – 5/16” x 6” heavy-duty
square shank
round shank
and comfort
square shank
and comfort
and comfort
specifications
specifications
BITS, BLADES
& ABRASIVES
KEYSTONE-TIP SCREWDRIVER
POWER TOOLS
CABINET TIP SCREWDRIVER
CONCRETE & MASONRY
MATERIAL HANDLING
#1 AND #2 PHILLIPS TIP OFFSET SCREWDRIVER – KTLSP120
LIGHT EQUIPMENT
SCREWDRIVERS
specifications
• KTLS603-4 – #2 x 4”
round shank
• KTLS603-6 – #3 x 6” round shank
• 1/4”
• Split blade screw holding driver wedges into
screw slot
• Positive gripping action holds, starts, and
drives slotted screws in awkward, hard to
reach places
• Not designed for torquing or tightening
LANDSCAPING
• KTLS603-7 – #2 x 7” round shank
and comfort
SLOTTED SCREW HOLDING SCREWDRIVER –
KTLSK36
HAND TOOLS
PHILLIPS-TIP SCREWDRIVER
• Blade thickness of .043” expanding to .085”
specifications
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
171
SCREWDRIVERS
10 PC SCREWDRIVER SET – CRES2010
ELECTRICIAN'S SCREWDRIVER
GENUINE PHILLIPS POCKET SCREWDRIVER
WITH CLIP – CRES550
• Series 2000
• CRESSDF33 – 3/16” x 3”
• #1 x 2”
• Contains 10 popular
sized screwdrivers
• CRESSDF36 – 3/16” x 6”
• Phillips head
• Round shaft
• Pocket clip on handle
• Convenient reusable
plastic pouch
• Ergonomic, high efficiency, high torque handles
• Chrome vanadium steel shafts for strength
and extended wear
• Highly polished and brightly chrome plated
blade
GENUINE PHILLIPS SCREWDRIVER –
CRES2501V-3
GENUINE PHILLIPS SCREWDRIVER –
CRES2504V-8
• Series 2000
• Series 2000
• #1 x 3”
• #4 x 8”
• Alloy steel incorporated into blade extends
tip life
• Alloy steel incorporated into blade extends
tip life
• Tapered, torque-enhancing cushion
grip handle
• Tapered, torque-enhancing cushion
grip handle
• CRESSDF46 – 1/4” x 6”
• Interlocks with durable core, provides a more
powerful, comfortable grip
• Interlocks with durable core, provides a more
powerful, comfortable grip
• Ergonomic, high efficiency, high torque
handles
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
• CRESSDF410 – 1/4” x 10”
• CRESSDF44V – 1/4” x 4”
• Round shaft
and extended wear
• Highly polished and brightly chrome plated
blade
PHILLIPS SCREWDRIVER
PRO SERIES POCKET SCREWDRIVER WITH
CLIP – CRES543-2
SCREWDRIVER SET-6 PC – CRESSDD6
• CRESSDFP44 – #2 x 4”
• 1/8” x 2”
• Round shaft
• CRESSDFP56 – #3 x 6”
• Round head
• Round shaft
• Pocket clip on handle
handles
handles
172
MECHANICS SCREWDRIVER
• Cushioned rubber
cover for comfort and
slippage control
and extended wear
• Tool steel shafts for strength and durability
• Highly polished and brightly chrome
plated blade
• Bright zinc plated blade to prevent corrosion
SCREWDRIVERS
CABINET SCREWDRIVER-ROUND SHANK –
PTOS88203
PTOS88204
PTOS88206
• 1/8” bit diameter
• Four sided handle with broad, shallow flutes
PTOS88210
PTOS88213
PTOS88216
• Precision machine
tips for precise fastener fit
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
PHILLIPS SCREWDRIVER-ROUND SHANK –
PTOS88324
• #1 tip, 3/16”
bit diameter
• Stubby
• #2 tip, 1/4” bit diameter
tips for precise
fastener fit
tips for precise
fastener fit
PTOS88328
PTOS88336
PTOS88348
tips for precise
fastener fit
tips for precise
fastener fit
tips for precise
fastener fit
• Precision machine tips for precise fastener fit
CONCRETE & MASONRY
PTOS88322
MATERIAL HANDLING
PTOS88313
LIGHT EQUIPMENT
SCREWDRIVERS
SLOTTED SCREWDRIVER-SQUARE SHANK
• PTOS88004 – 1/4” bit diameter
• Stubby
BITS, BLADES
& ABRASIVES
SLOTTED SCREWDRIVER-SQUARE SHANK –
PTOS88002
POWER TOOLS
SLOTTED SCREWDRIVER-ROUND SHANK
• Square shank to permit use of a wrench for
added leverage
• PTOS88510 – T10
• T40
• PTOS88515 – T15
• PTOS88520 – T20
• PTOS88525 – T25
• PTOS88527 – T27
• Angular loads should be avoided whenever
possible
• PTOS88530 – T30
GENERAL SUPPLIES
TORX SCREWDRIVER-ROUND SHANK –
PTOS88540
LANDSCAPING
TORX SCREWDRIVER-ROUND SHANK
HAND TOOLS
SAFETY SUPPLIES
WORKWEAR
173
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
SHEARS
SLOTTED ANGLE IRON SHEAR –
PORS2790HKP
• 38”
• Used to make braces,
shelves, and tables
• Shear cut blades
• Can be used to drill in
concrete, block, brick
and soft stone
• Designed for general purpose rotary percussion drilling
• Rolled slow spiral flute design and a positive
angle carbide tip
BITS, BLADES
& ABRASIVES
POWER TOOLS
SNIPS
COMPOUND ACTION SNIPS – WISSM1R
• Cuts straight to left
• Cuts straight to right
• Cuts straight
• Cuts low carbon cold
rolled steel
rolled steel
rolled steel
• Non-slip serrated jaws are made of wear
resistant molybdenum steel
• Provides extra service demanded by the compound lever action
• Cuts up to 20 gauge low carbon cold
rolled steel
• Self-opening action for fast, effortless feed
• Features non-slip, serrated jaws as well as
non-slip textured grips
HAND TOOLS
• Protective safety latch
MULTIMASTER SNIPS – WISSM300
• Combines long cut of
tinners snips with the
strength of compound action
LANDSCAPING
• Multiplies the force of the hand by five times
• For making long, fast cuts in material like:
paper, plastic, sheet metal
• Provides extra service demanded by the compound lever action
• Self-opening action for fast, effortless feed
SAFETY SUPPLIES
GENERAL SUPPLIES
• Protective safety latch
SNIPS
SERRATED AVIATION SNIPS – PTOS303L
SERRATED AVIATION SNIPS – PTOS303R
SERRATED AVIATION SNIPS – PTOS303S
• 1-3/8” edge left cut
• 1-3/8” edge right cut
• Compound leverage
multiplies handle pressure
• 1-3/8” edge
straight cut
• Serrated blades for maximum grip of
the material
the material
the material
WORKWEAR
174
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
10 POCKET CARPENTER’S NAIL & TOOL BAG –
CLCSI923X
14 POCKET LARGE TRAYTOTE BAG –
CLCS1139
• Made of heavy-duty top
grain leather
• Heavy-duty suede leather
• 2 pockets inside, 12 outside
• 4 main nail/tool pockets
• Double gussets keep front
pockets wide open for
easy access
• 6 smaller pockets fit pliers,
nail sets, pencils, etc.
• 13-1/2” x 6” multi compartment plastic tray included,
slides securely into bottom
of bag
• Double leather reinforcements at all major
stress points
• Steel hammer loop
• Fits belts up to 2-3/4” wide
• Opens wide for easy access
MATERIAL HANDLING
CLCS179354
LIGHT EQUIPMENT
TOOL BAGS
• 16”L x 9”W x 12”H
16 POCKET/4PIECE CARPENTER’S COMBO –
CLCS5608
22 POCKET-16” LARGE BIGMOUTH BAG –
CLCS1165
• 13-1/2” x 9” multi-compartment plastic tray included,
stored into middle compartment for easy access to the
rest of bag contents
• Easy to carry handle
design provides simple
adjustments, easy
carrying and storage of apron without spilling
contents
• 12 multi-use pockets
inside and outside organize tools and accessories
• 8 pockets outside and 7 inside to organize a
wide range of tools and accessories
• Totally versatile all parts removable
and interchangeable
• Padded reinforced web carrying handles
and adjustable shoulder strap
• Main pocket with web loops to accommodate
large handle tools
• Combo consists of padded belt, 2 bags and
hammer holder
• 16”L x 8-1/2”W x 10”H
• Extra padded carrying handle and adjustable
shoulder strap
• Stay-open feature on main reversed pockets
• Metal tool snap and electrical tape strap
• Speed square and pry bar holders
• 16”L x 9”W x 9”H
• Steel hammer loop
• Opens wide for easy
access to bag’s contents
BITS, BLADES
& ABRASIVES
• 7 main pockets and 6 smaller pockets
POWER TOOLS
15 POCKET, 16” CENTER TRAY TOOL BAG –
CLCS1529
CONCRETE & MASONRY
• Metal clip holds all sizes of measuring tapes
• Metal clip holds all measuring tape sizes
• 5” wide padded comfort belt with double
tongue steel roller buckle
31 POCKET, 18” MEGAMOUTH TOTE BAG –
CLCS1163
CLCSI823X
inside and 6 outside
organize tools and
accessories
inside and 18 outside
organize tools and
accessories
• Opens wide for easy
access to bag’s contents
• Internal metal frame holds bag
open for easy access
• Padded reinforced web carrying handles
• Large interior to carry power tools, circular
saws, hard hats, etc.
• 6 smaller pockets fit pliers,
nail sets, pencils, etc.
• 2 steel hammer loops
LANDSCAPING
• 12”L x 8-1/2”W x 8”H
HAND TOOLS
23 POCKET-12” STANDARD BIGMOUTH BAG –
CLCS1161
• Padded handles and adjustable shoulder strap
GENERAL SUPPLIES
• 18”L x 11”W x 12”H
SAFETY SUPPLIES
WORKWEAR
175
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
TOOL HOLDERS
“SNAP-IN” SWINGING HAMMER HOLDER –
CLCS839
12 POCKET HEAVY-DUTY WORK APRON –
CLCSI427X
16’-30’ MEASURING TAPE HOLDER – CLCS465
• Top grain leather
• Cradle design keeps hammer secure
• Molded leather retains shape
• Swing feature keeps hammer vertical
• 6 smaller pockets
fit pliers, nail sets,
pencils, etc.
• 2” polyweb belt fits waists 29”-46”
• Steel hammer loops
• Leather combination square holder
30 POCKET OUTSIDE BUCKET POCKETS –
CLCS1118
4” HIGH FULL ROUND BUCKET TRAY –
CLCS1154
• 30 multi-size outside pockets organize a wide range of
tools & accessories
• Durable lightweight plastic
• Drill pocket with hook and
loop handle strap
• Stack or nest trays inside
a standard 3-1/2 or 5 gallon bucket
• Unique “pop up”
carrying handle
CORDLESS DRILL HOLSTER – CLCS5020
• Double layer of rugged,
lightweight nylon
• Holds most 1/4”-1/2”
drills up to 18 volts
• Tape strap and key clip
• Pocket for drill bit
accessories
• Security pocket with hook loop closure
• Safety strap with hook and loop fastener
BITS, BLADES
& ABRASIVES
• Designed to fit most standard 3-1/2 - 5
gallon buckets
PLIER HOLDER – CLCS768
STANDARD PLUMB BOB HOLDER – CLCS4512
STEEL LOOP HAMMER HOLDER – CLCS439
• Fits narrow type hand tools
up to 10” long
• Fits 18-24oz plumb bobs
• Cradle design eliminates
hammer pivoting
• Leather safety strap
LANDSCAPING
HAND TOOLS
• Molded leather retains shape
• Safety snap
TOOL HOLDERS
BULL PIN AND BOLT BAG – KTLS5416
BULL PIN AND BOLT BAG WITH TUNNEL LOOP
– KTLS5416T
BULL PIN HOLDER – KTLS5417T
• No. 4 canvas
• No. 4 canvas
• Leather construction
• Bolt bag with bull-pin loop on
each side
• Bolt bag with bull-pin loop on
each side
• Holder for Klein bull pins
• Riveted to assure long life
CANVAS ELECTRODE BAG – KTLS5471
CANVAS UTILITY BAG-POCKET – KTLS5142P
ERECTION WRENCH HOLDER – KTLS5459T
• Made of tough no. 4 canvas
• Heavy no. 8 canvas
• Heat resistant, hard leather bottom
• Top edge reinforced with
1/4” rope
• Has tool slots for two
erection wrenches
• Metal snaps provided on
loops for easy attachment
to belts up to 3” wide
• Tunnel loop is riveted
to assure long life
• Web loop for sliding over belt
• Holds erection wrenches and adjustable head
construction wrench
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Holds all standard bull pins
176
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
ERECTION WRENCH HOLDER – KTLS5461T
• Cotton web tunnel loop and
leather construction
• Has tool slots for two
erection wrenches
• Holds erection wrenches
and adjustable head construction wrench
• Leather reinforced bottom
extends 3” up the sides
• Inside pocket measures 8” x 8”
• Holds erection wrenches and
adjustable head construction wrench
• Rope handle
• No. 6 canvas
• No exposed rivets in back
• Black molded
polypropylene bottom
CONCRETE & MASONRY
WIDE OPENING STRAIGHT WALL BUCKET –
KTLS5109
• Rope handle
POWER TOOLS
• Pockets for 7”, 8”, and 9” side
cutting pliers, most screwdrivers,
6’ folding rules, and open end wrenches
from 9/16” to 13/16”
• No. 1 canvas
• Holds two erection wrenches
LINEMANS POUCH – KTLS5118C
LEATHER BOTTOM CANVAS BUCKET –
KTLS5104
MATERIAL HANDLING
ERECTION WRENCH HOLDER – KTLS5460
LIGHT EQUIPMENT
TOOL HOLDERS
• Nickel plated alloy snap
TOOL HOLDERS
LEATHER WORK BELT – STNS95237
• This leather taper rule
holder fits 25’ & 30’ tapes
• 1-3/4” wide
• 1-3/4” wide
• This heavy-duty work belt
fits 32” to 40” waists
• This heavy-duty work belt
fits 40” to 48” waists
• Extra strong double tongue
roller buckle
• Extra strong double tongue
roller buckle
• Attractive embossed basket weave design
• Attractive embossed basket weave design
• Heavy-duty top grain
saddle leather
• Performed pockets with
easy “Push up” design
• Safety snap positioned to allow tape rules with
belt clips
HAND TOOLS
LEATHER WORK BELT – STNS95236
BITS, BLADES
& ABRASIVES
LEATHER TAPE HOLDER – STNS95140
• Contoured to permit use of tape blade lock
• 2-3/4” belt slots
LANDSCAPING
TOOL POUCHES
17 POCKET -4 PIECE COMBO APRON –
CLCS1604
• Padded comfort belt with double adjustment
fits waists 29”-52”
• Double layer of rugged, lightweight 600D polyester fabric
• 11” x 6” multi-compartment
plastic tray included that
slides securely into bottom
of tool carrier organizes
small parts
• Zippered top flap to prevent
spillage of tools when not
in use
• Ergonomic rubber handle and padded shoulder strap design for easy storage and the ideal
way to carry loaded tool pouch
• 16 multi-use outside pockets and 7 inside to
organize a wide range of tools and accessories
• Zippered back pocket for 8” x 5” writing pad
• Extra padded carrying handle and adjustable
shoulder strap
• Outside pocket to hold cell phone holder and
3 outside large screwdriver holders
• Box shaped design prevents tipping
• Large main divided pockets with elastic loops
to accommodate large tools
SAFETY SUPPLIES
• 6 main nail and tool pockets and 11 smaller
pockets for pliers, pencils, nail sets, two way
radio, etc.
23 POCKET LARGE ELECTRICAL AND MAINTENANCE TOOL CARRIER – CLCS1528
GENERAL SUPPLIES
• Made of 600D polyester fabric and 1680D ballistic nylon binding
21 POCKET ZIPPERED PROFESSIONAL ELECTRICIAN'S TOOL POUCH – CLCS1509
• Electrical strap
• 11”L x 10”W x 19”H
WORKWEAR
177
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
TOOL POUCHES
61 POCKET IN & OUT BUCKET POCKETS –
CLCS4122
• Made of durable, rugged,
600D ripstop fabric
• 36 Triple row outside pockets, 25 double row inside
pockets
• Drill holder with side release
buckle security strap
• Designed to fit most standard 3-1/2 to 5
gallon buckets
TOOL SETS
PROFESSIONAL TOOL SET-148 PC –
CRESCTK148MP
SOCKET AND TOOL SET-30 PC –
CRESCTK30SET
SOCKET AND TOOL SET-70 PC –
CRESCTK70SET
• 1/2”, 3/8”, & 1/4” drive
• 3/8” drive ratchet
• 12 combination
wrenches
• Metric sockets
• 3/8” & 1/4” drive
ratchets
• 2 Pliers
• Deep metric socket
• 4 Screwdrivers
• Deep SAE socket
• Magnetic bit driver
• Spark plug socket
• SAE sockets
• Hex Keys
• 32 SAE and metric
sockets
• 8 SAE hex key set
• Multi-bit DuraDriver screwdriver and 12 bits
• 12 SAE and metric combination wrenches
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
WIRE PULLING GRIPS
HAVEN’S GRIP – KTLS1604-20
HAVEN’S GRIP – KTLS1625-20
• Designed for use when light,
compact grip is desired and
where conductor damage is
not a factor
• Designed for use when
light, compact grip is
desired and where conductor damage is not a factor
• Gripping pressure of the knurled jaw is applied
to 1/4” cable area
• Gripping pressure of the knurled jaw is applied
to 1/4” cable area
• Has a swing latch to help hold cable in the jaw
WIRE STRIPPERS/CUTTERS
WIRE STRIPPER/CUTTER – KTLS1011
WIRE STRIPPER/CUTTER – KTLS11045
• Strips six standard wire
sizes without nicking wire
• Compact, lightweight wire
stripping and cutting tool
• Scissors action of 1/2”
wide cutter makes clean cuts with little effort
• Narrow nose fits into
tight places
• Serrated nose jaws to bend, shape, or pull
wire; holes for looping wire ends
• Hardened steel with precision ground stripping holes
• Spring loaded for self opening action
• Do not use for cutting steel wire or bolts
• Comfortable, plastic covered handles
• Precision ground stripping holes for easy
removal of insulation
WORKWEAR
• Easy to read wire gauge markings on both
sides for stripping in either direction
178
• Black oxide finish resists corrosion
• Textured handles provide a firm,
comfortable grip
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
• 1/4”
• 7/8”
• Thin narrow jaws for better access in
limited spaces
limited spaces
• No ribs or serrations
• Arched surface
• Full polish finish
12 POINT HEAVY DUTY OFFSET STRIKING
WRENCH
12 POINT HEAVY DUTY OFFSET STRIKING
WRENCH
12 POINT HEAVY-DUTY OFFSET STRIKING
WRENCH – PTOS2644SW
• PTOS2617SW – 1-1/16”
• PTOS2627SW – 1-11/16”
• 2-3/4”
• PTOS2618SW – 1-1/8”
• PTOS2635SW – 2-3/16”
• Heat treated
alloy steel
• 0-250 ft lb. dial head
• Retains calibration
for 30,000 cycles
• Steel ratchet wheels for uncompromising
strength
• Easy to read, high contrast scale
• PTOS2623SW – 1-7/16”
• PTOS2624SW – 1-1/2”
limited spaces
• PTOS2626SW – 1-5/8”
• PTOS2628SW – 1-3/4”
• PTOS2629SW – 1-13/16”
• Offset handle clears obstructions
limited spaces
• PTOS2630SW – 1-7/8”
• PTOS2636SW – 2-1/4”
BITS, BLADES
& ABRASIVES
• PTOS2638SW – 2-3/8”
POWER TOOLS
• PTOS2620SW – 1-1/4”
• PTOS2621SW – 1-5/16”
CONCRETE & MASONRY
12 POINT COMBINATION WRENCH –
PTOS1228
MATERIAL HANDLING
12 POINT COMBINATION WRENCH –
PTOS1208
1/2” DR RATCHET TORQUE HEAD WRENCH –
PTOS6125AB
LIGHT EQUIPMENT
WRENCHES
• PTOS2640SW – 2-1/2”
• PTOS2641SW – 2-9/16”
HAND TOOLS
limited spaces
• Ideal for heavy construction and field
service work
• Spud end aligns flange holes
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
179
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
WRENCHES
12 POINT SPUD HANDLE BOX WRENCH
12 POINT SPUD HANDLE BOX WRENCH
• PTOS2616 – 1”
• PTOS2617 – 1-1/16”
• PTOS2632 – 2”
• PTOS2618 – 1-1/8”
• PTOS2620 – 1-1/4”
• PTOS1210-T500 – 5/16”
limited spaces
• PTOS2621 – 1-5/16”
• PTOS1216-T500 – 1/2”
• PTOS2623 – 1-7/16”
• PTOS1220-T500 – 5/8”
• PTOS2624 – 1-1/2”
• Ideal for heavy construction and field
service work
• PTOS2626 – 1-5/8”
• PTOS2627 – 1-11/16”
• Spud end aligns flange holes
12 PT ASD COMBINATION WRENCH
• PTOS2629 – 1-13/16”
• PTOS2630 – 1-7/8”
• PTOS2635 – 2-3/16”
• PTOS2638 – 2-3/8”
POWER TOOLS
• PTOS2641 – 2-9/16”
• PTOS2644 – 2-3/4”
limited spaces
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Offset handle clears obstructions
• PTOS1212-T500 – 3/8”
• PTOS1222-T500 – 11/16”
• PTOS1226-T500 – 13/16”
• PTOS1214-T500 – 7/16”
• PTOS1224-T500 – 3/4”
• PTOS1240-T500 – 1-1/4”
• PTOS1228-T500 – 7/8”
• PTOS1230-T500 – 15/16”
• Patented anti-slip design
• PTOS1232-T500 – 1”
LANDSCAPING
• PTOS1234-T500 – 1-1/16”
• PTOS1236-T500 – 1-1/8”
• Arched surface
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
180
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
12 PT COMBINATION WRENCH
12 PT COMBINATION WRENCH – PTOS1280
15 PIECE 12 PT COMBINATION WRENCH SET –
PTOS1200F-T500
• PTOS1242 – 1-5/16”
• 2-1/2”
• PTOS1244 – 1-3/8”
• PTOS1246 – 1-7/16”
limited spaces
• PTOS1248 – 1-1/2”
• PTOS1256 – 1-3/4”
• Hardwood handles have contoured shape with
red lacquer handle
3/8” DR 13 PC METRIC CROWFOOT WRENCH
SET – PTOS4900-MCF
• PTOS1266 – 2-1/16”
• 3/8” thru 7/8”
• 10mm thru 22 mm
• PTOS1268 – 2-1/8”
• 9 socket clips, 13” socket bar
• 13 socket clips, 17” socket bar
6 POINT HEAVY-DUTY STRIKING WRENCH
6 POINT HEAVY-DUTY STRIKING WRENCH –
PTOS2729SW
6 POINT HEAVY-DUTY STRIKING WRENCH –
PTOS2762SW
• PTOS2717SW – 1-1/16”
• 1-13/16”
• 3-7/8”
• PTOS2720SW – 1-1/4”
• Heat treated
alloy steel
• Heat treated
alloy steel
limited spaces
limited spaces
• PTOS1260 – 1-7/8”
• PTOS1264 – 2”
• PTOS1270 – 2-3/16”
• PTOS1272 – 2-1/4”
POWER TOOLS
3/8” 9 PC CROWFOOT WRENCH SET –
PTOS4900-9
• PTOS1258 – 1-13/16”
CONCRETE & MASONRY
• PTOS1252 – 1-5/8”
• TORQUEPLUS combination wrenches
MATERIAL HANDLING
• 5/16” thru 1-1/8” set
LIGHT EQUIPMENT
WRENCHES
• PTOS1276 – 2-3/8”
BITS, BLADES
& ABRASIVES
limited spaces
• PTOS2726SW – 1-5/8”
• PTOS2732SW – 2”
• PTOS2735SW – 2-3/16”
• PTOS2741SW – 2-9/16”
6 PT DOUBLE END FLARE NUT WRENCHTORQUEPLUS – PTOS3764
7 PC 12 PT FLARE NUT RATCHETING WRENCH
SET – PTOS3800A
• PTOS2744SW – 2-3/4”
• 3/8” thru 3/4”
• PTOS2747SW – 2-15/16”
• 3/8” x 7/16”
• PTOS2756SW – 3-1/2”
limited spaces
limited spaces
• Thin narrow jaws
for better access in
limited spaces
GENERAL SUPPLIES
• PTOS2750SW – 3-1/8”
LANDSCAPING
• PTOS2738SW – 2-3/8”
HAND TOOLS
• PTOS2723SW – 1-7/16”
SAFETY SUPPLIES
WORKWEAR
181
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
WRENCHES
DIAL TORQUE WRENCH – PTOS6177F
• Inch pound,
centimeter kilogram
• 1/2” X 9/16”
• 5/8” X 11/16”
limited spaces
limited spaces
• 16 interchangeable tips
• Torsion drive design
• Memory needles are standard
• Plastic box included
METRIC ASD COMBINATION WRENCH –
PTOS1207M-T500
PTOS1208M-T500
PTOS1209M-T500
• 7mm
• 8mm
• 9mm
• Locking groove to prevent slippage
• Unique arc design
PTOS1210M-T500
METRIC ASD COMBINATION WRENCH
METRIC ASD COMBINATION WRENCH
• 10mm
• PTOS1211M-T500 – 11mm
• PTOS1213M-T500 – 13mm
• PTOS1212M-T500 – 12mm
• PTOS1215M-T500 – 15mm
• PTOS1214M-T500 – 14mm
• PTOS1217M-T500 – 17mm
limited spaces
• PTOS1216M-T500 – 16mm
• PTOS1219M-T500 – 19mm
• PTOS1218M-T500 – 18mm
• PTOS1221M-T500 – 21mm
• PTOS1220M-T500 – 20mm
• PTOS1222M-T500 – 22mm
• PTOS1224M-T500 – 24mm
• Arched surface
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
182
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
OFFSET HEAD STRUCTURAL WRENCH –
PTOSC912
OPEN END WRENCH – PTOS3018
• PTOSC904A – 3/4”
• 2”
• 1/4” x 5/16”
• PTOSC905 – 7/8”
• PTOSC906B – 1”
• Long offset handle provides greater leverage
and clearance
limited spaces
• PTOSC907 – 1-1/16”
• PTOSC908 – 1-1/4”
• PTOSC908A – 1-5/16”
• PTOSC909 – 1-7/16”
• PTOSC910 – 1-5/8”
CONCRETE & MASONRY
• PTOSC907A – 1-1/8”
MATERIAL HANDLING
OFFSET HEAD STRUCTURAL WRENCH
LIGHT EQUIPMENT
WRENCHES
POWER TOOLS
• Long offset handle provides greater leverage
and clearance
• Hardened tapered handle aligns bolts and
rivet holes
• Openings are precision broached for proper fit
• 7/16” x 1/2”
limited spaces
limited spaces
limited spaces
• 1/2” x 9/16”
• 9/16” x 5/8”
• 5/8” x 3/4”
limited spaces
limited spaces
limited spaces
• 5/8” x 11/16”
• 11/16” x 3/4”
• 11/16” x 25/32”
limited spaces
limited spaces
limited spaces
SAFETY SUPPLIES
• 3/8” x 7/16”
GENERAL SUPPLIES
• 3/8” x 5/16”
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
WORKWEAR
183
WRENCHES
• 3/4” x 7/8”
• 15/16” x 1”
• 1-1/16” x 1-1/8”
limited spaces
limited spaces
limited spaces
OPEN END WRENCH-EXTRA THIN
OPEN END WRENCH-SHORT ANGLE
• PTOS3316 – 1/4” x 1/4”
• 1-1/16” x 1-1/4”
• PTOS3425 – 7/16” x 1/2”
• PTOS3426 – 1/2” x 9/16”
limited spaces
• PTOS3430 – 9/16” x 5/8”
• 15 degree and 75 degree angle heads
limited spaces
• PTOS3440 – 13/16” x 7/8”
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
HAND TOOLS
• PTOS3318 – 9/32” x 9/32”
• PTOS3320 – 5/16” x 5/16”
• PTOS3324 – 11/32” x 11/32”
• PTOS3316 – 3/8” x 3/8”
• PTOS3328 – 7/16” x 7/16”
• PTOS3332 – 1/2” x 1/2”
• PTOS3336 – 9/16” x 9/16”
limited spaces
• 15 degree and 75 degree angle heads
OPEN END WRENCH-SHORT ANGLE –
PTOS3340
• 5/8” x 5/8”
LANDSCAPING
limited spaces
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
WRENCHES
184
ADJUSTABLE HEAD CONSTRUCTION WRENCH
– KTLS3239
ERECTION WRENCH
RATCHETING CONSTRUCTION WRENCH –
KTLS3238
• Versatile wrench fits all
nuts and bolts to 1-1/2”
• KTLS3212-H – 1-1/4”
• 1/2” Drive
• KTLS3213 – 7/8”
• Accepts 1/2” square drive hex sockets
• Eliminates the need for carrying several fixed
size wrenches
• KTLS3222 – 3/4”
• Reversible ratchet
• Forged from select alloy steel to withstand
high leverage and heavy loads
• Eliminates the need for carrying several fixed
size wrenches
• Extra heavy-duty head area gives maximum
strength and durability
• Forged from select alloy steel with continuous
taper handle for aligning bolt holes
• Continuous taper of handle makes lining up
bolt holes easy and works on a range of bolt
and or hole sizes
• Industrial black finish for corrosion resistance
• Forged from select alloy steel with
continuous taper handle for aligning bolt
and/or rivet holes
• Industrial black finish for corrosion resistance
• Extra large hub area works on larger diameter
holes than other wrenches
• American bridge design
Call us at: 8 00-6 6 9-778 8
HAND TOOLS
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
RATCHETING COMBINATION WRENCH SET-4
PC – CRESFR4
• CRESAT18-V – 8”-black phosphate
• CRESAC18-V – 8”-chrome
• CRESAT118 – 18”-black phosphate
• CRESAC115 – 15”-chrome
• For professional, industrial or home use
• Wide capacity jaw allows each tool to work
with more fastener sizes
• For professional, industrial or home use
• Wide capacity jaw allows each tool to work
with more fastener sizes
• Black phosphate finish resists corrosion
• Open end jaw surface parallel within
+/-.0015” reach
• 72 tooth ratcheting mechanism receives special heat treat process
• Tool exceeds ANSI torque loads for standard
combination wrenches
• Mirror finish chrome vanadium steel
• Chrome plated finish resists rust
and corrosion
REVERSIBLE RATCHETING COMBINATION
WRENCH SET-7 PC – CRESFRR7
• 3/8”, 7/16”, 1/2”, 9/16”
• 8mm, 3/8”, 7/16”, 1/2”,
9/16”, 5/8”, 3/4”
• Patented “Rapid Reverse”
system for faster job
completion
• Patented “Rapid
Reverse” system for
faster job completion
• Reverses direction with push of a button
• Patented ratchet feature turns bolt with just 5
degree handle swing
+/-.0015” reach
+/-.0015” reach
LANDSCAPING
• Patented ratchet feature turns bolt with just 5
degree handle swing
HAND TOOLS
• Reverses direction with
push of a button
BITS, BLADES
& ABRASIVES
REVERSIBLE RATCHETING COMBINATION
WRENCH SET-4 PC – CRESFRR4
POWER TOOLS
• Tension spring stabilizes jaw and knurl
adjusts easily
• Tension spring stabilizes jaw and knurl
adjusts easily
• Closed end works in
places deep sockets will
not reach
CONCRETE & MASONRY
• Patented ratchet feature
turns bolt with just 5
degree handle swing
MATERIAL HANDLING
• 3/8”, 7/16”, 1/2”, 9/16”
LIGHT EQUIPMENT
WRENCHES
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
185
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
NOTES
186
Call us at: 8 00-6 6 9-778 8
LANDSCAPING
CHAIN SAW – CRAEMS170-14”
CHAIN SAW – CRAEMS260-18”
• Small, lightweight,
powerful homeowner
saw. Great for trimming and cutting
small trees.
• Includes many of the
same excellent design
features as our professional models
• 14” bar, 3/8” PMN Oilomatic chain
• Professional grade
chain saw has an
excellent power to
weight ratio and an
improved air filter system
• 14” bar, 3/8” PM1 Oilomatic chain
• 30.1 cc displacement, 1.3 kW engine power
• 18” bar, 3/8” RM2 Oilomatic chain
• 250 cc fuel capacity
CHAIN SAW – CRAEMS390
• Stihl Farm Boss,
designed for
rugged farm use
• Mid-size saw, combination of performance features that
make each job go a
little faster
POWER TOOLS
CONCRETE & MASONRY
CHAIN SAW – CRAEMS290-18
MATERIAL HANDLING
CHAIN SAW – CRAE009L-14
LIGHT EQUIPMENT
CHAIN SAWS
VACUUM/BLOWERS
BLOWER – CRAEBG85PRO
BLOWER – CRAEBR340
• HomeScaper series
• Rugged handheld
model for heavyduty work
• Top of the line hand
held blower, both flat
and round nozzles,
cruise control for constant speed and special
soft grip handle
• Has easy grip throttle control with on-off switch and
variable speed trigger
• 27.2 cc displacement, .70kW engine power
• 174 mph air velocity
• 27.2 cc displacement, .80 kW engine power
• 44.9 cc displacement, 2.0
kW engine power
HAND TOOLS
BITS, BLADES
& ABRASIVES
BLOWER – CRAEBG65
SHREDDER VAC/BLOWER – CRAESH55
SHREDDER VAC/BLOWER – CRAESH85
• Magnum
• Popular choice of the
landscaping industry.
Powerful, yet comfortable to use all day long
• Easily converts to a
blower. Special shredder blades on fan wheel
reduce yard waste
• Suitable for work
around the home
or jobsite
• 44.9 cc displacement,
2.0 kW engine power
• 36.5 mph air velocity
LANDSCAPING
BLOWER – CRAEBR550
GENERAL SUPPLIES
TRIMMERS
HEDGE TRIMMER – CRAEHS45-24
TRIMMER – CRAEFS250R
• Designed for
homeowner use
• Designed for
homeowner use
• More power for the professional
user to make each job a little easier
• 18” dual reciprocating, double sided blades
with integrated cutter guard
• 24” dual reciprocating, double sided blades
with integrated cutter guard
SAFETY SUPPLIES
HEDGE TRIMMER – CRAEHS45
• 40.2 cc displacement, 1.6 kW
engine power
WORKWEAR
• Loop handle
187
TRIMMERS
TRIMMER – CRAEFS46
TRIMMER – CRAEFS80R
• HomeScaper series trimmer
• Professional series trimmer
• Lightweight and powerful, extra
long shaft to make trimming
jobs easier for taller users
• High performance clutch
minimizes slippage under
extreme conditions
• 27.2 cc displacement, .75 kW
engine power
• 25.4 cc displacement, .95 kW
engine power
• Loop handle
• Loop handle
OIL & LUBRICANTS
BAR & CHAIN OIL
HIGH PERFORMANCE 2 CYCLE ENGINE OIL
• CRAS0781-516-5003 – 32 oz.
• CRAS0781-319-8014 – 2 oz., 1 gal. mix
• CRAS0781-516-5005 – 1 gal.
• CRAS0781-319-8015 – 6 oz., 2-1/2 gal. mix
• Formulated to adhere to the bar
and chain and to reduce wear
• CRAS0781-319-8016 – 12.8 oz., 5 gal. mix
• Premium quality, conventional petroleum based
engine oils designed to
deliver the highest levels of
engine protection
• Special agents in the oil
formulation to help keep sap
and pitch from clinging to the
bar and chain
• They contain a pour depressant to aid in low temperature applications and a mixing agent to aid in
mixing with gasoline
HAND TOOLS LANDSCAPING
EXTENDED REACH POLE PRUNER –
CRASPP100
HAND PRUNER – CRASPP10
• Aluminum specialized tool for
precise pruning of very high or
wide shrubs and small trees
• The value choice for
landscapers with high
hand pruner loss
• 7’ reach with 180 degree revolving
arm for precise cutting angles
• Lightweight die-cast body
• Power grip has remote blade lock
• Replaceable blade
LOPPER – CRASPL10
• Longer, wider opening
blades allow efficient
pruning of larger stems
• Specially designed
cutting head for vines
and small branches
• Lightweight, PVC coated steel grips
• Nearly indestructible,
efficiently prunes larger
twigs and stems but is
precise enough for fine pruning
• Blades can be resharpened
• Top quality blades stay sharp longer
• Aircraft aluminum handles
• Non-slip coated handles
• 24” overall length
ARBORICULTURE SAW – CRASPS70
• Ideal for arborists and
professional landscapers when one tool has
to “do it all”
• 13” nickel plated blade with hardwood handle
• Sap clearance groove
• 1” cutting capacity
• Innovative quick release blade
• Replaceable blade
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LANDSCAPING
188
Call us at: 8 00-6 6 9-778 8
LANDSCAPING
POCKET SAW – CRASPS10
• Makes quick work of
pruning tree branches
• Longer handles give
greater leverage
• 5.75” folding blade
with blade lock
• General purpose saw with high tech cutting
tooth design
POLE PRUNER SET – CRASPP900
PRUNING SAW – CRASPS40
PRUNING SAW – CRASPS60
• Ideal tools for demanding, high
volume tree work
• 7” fixed blade with
lightweight handle
• Durable extended fiberglass poles
with 12’ reach and a pruning
capacity of 1.25”
• Plastic sheath has thumb
lock and belt loop
• 9.5” fixed blade with
chemical nickel finish is
excellent for cold
weather pruning
• Plastic sheath has thumb lock and detachable
belt loop
• All parts are replaceable
POWER TOOLS
TELESCOPING POLE SAW – CRASPS780
• For quickly cutting tree limbs of
varying diameters and height
where access with more than one
tool is impractical
BITS, BLADES
& ABRASIVES
• Designed for high volume professional landscaping where a variety
of trees require precise pruning
• Lightweight aluminum pole has up to a 15’
working reach
• Engineered box shaft has minimal flex when
fully extended
BYPASS LOPPER – UNNS62329
BYPASS PRUNER – UNNS62434
• For cutting thick
branches
• For pruning shrubs and small
trees up to 1-1/4” in diameter
• For pruning shrubs and small
trees up to 5/8” in diameter
• 21” heat treated
blade w/ safety shield
• Stamped steel blades with
power assist compound
cutting action
• Non-stick coated steel blades
• Dual side latch release with
Comfort Wave grip
• Oval, tubular steel handles
with non-slip grips
DITCH BANK BLADE – UNNS62162
GRASS TRIMMER – UNNS62203
• For cutting corn stalks
and heavy brush
• For cutting heavy brush along a ditch
• For cutting tall grass and weeds
• 16” tempered steel blade
• 15” sharpened
tempered steel blade
• 8-1/2” x 2-1/4” double edged serrated
steel blade
• 14” hardwood handle
GENERAL SUPPLIES
CORN KNIFE – UNNS62653
LANDSCAPING
21” BOW SAW – UNNS62918
HAND TOOLS
TRIMMING TOOLS
• Oval, tubular steel handle
CONCRETE & MASONRY
LOPPER – CRASPL40
MATERIAL HANDLING
LOPPER – CRASPL30
LIGHT EQUIPMENT
HAND TOOLS
• 6-1/2” hardwood handle
• For cutting tall grass and weeds
SAFETY SUPPLIES
WEED CUTTER – UNNS62105
• Double edged, serrated steel
blade cuts on forward &
return swing
WORKWEAR
189
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LANDSCAPING
DIGGERS
POST HOLE DIGGER – UNNS78005
POST HOLE DIGGER – UNNS78006
• For digging post holes and footings in
all soil types
• For digging post holes and footings in
all soil types
• Hercules pattern, two-piece, riveted,
high carbon steel blades with 6” point
spread and beveled digging edge
• Hercules pattern, two-piece, riveted,
high carbon steel blades with 6” point
spread and beveled digging edge
• 48” hardwood handles
• 48” fiberglass handles
DIGGERS
SOIL PROBE – UPLS69401
SOIL PROBE – UPLS69403
• Classic series super-duty NUPLAGLAS pultruded structural core
• Classic series super-duty NUPLAGLAS pultruded structural core
• Reinforcement sections at critical
stress points
stress points
• Provides optimum strength to
weight ratio
• Provides optimum strength to
weight ratio
• 60” shaft with metal tip
• #2 round point solid shank
DRAIN SPADES
14” DRAIN SPADE – UNNS47202
• For digging and clearing drainage ditches
• For digging and clearing drainage ditches
• 14” closed back industrial gauge tempered steel blade with forward-turned
blade step
• 14” closed back industrial gauge tempered steel blade with forward-turned
blade step
• For digging drainage ditches and
trenches
• 29” ash wood handle with steel and
wood D-grip
• Crimped steel collar strengthens handle to
socket connection
• Crimped steel collar strengthens handle
to socket connection
• 48” fiberglass handle
• 30” fiberglass handle with ABS D-grip
• 4-3/4” x 16” industrial steel gauge blade
• 4-3/4” x 14” industrial gauge blade
16” POST SPADE – UNNS48102
• For digging and clearing drainage
ditches and trenches
• For digging and clearing drainage
ditches
• For digging postholes and ditches
• 16” solid shank industrial gauge
tempered steel with forward-turned
blade step
• 16” closed back industrial gauge
tempered steel blade with forward-turned blade step
• 27” ash wood handle with steel and
wood D-grip
• Crimped steel collar strengthens
handle to socket connection
• 4” x 11-1/2” parallel industrial gauge, open
back blade
• 16” open back tempered steel blade
with forward-turned blade step
• 16” solid shank industrial gauge
tempered steel with forwardturned blade step
• 27” ash wood handle with steel
and wood D-grip
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
190
Call us at: 8 00-6 6 9-778 8
LANDSCAPING
• E-series super-duty NUPLAGLAS pultruded
structural core
• Reinforcement sections at critical stress
points
points
points
• Injection molded clad exterior jacket of tough
engineering polymer
engineering polymer
engineering polymer
• 16” drain spade solid shank
• 14” drain spade solid shank
• #2 eastern scoop
• 27” fiberglass D-handle
3 PRONG CULTIVATOR – UNNS68313
4 PRONG CULTIVATOR – UNNS68-124
• For cultivating, weeding and aerating in industrial applications
• For cultivating, weeding and aerating soil in
most soil types
• 3-1/8” wide, forged steel head with 3 sharp,
curved tines
• 5” wide, welded steel head with 4 sharp,
curved tines
• 48” ash wood handle
MANURE FORK – UNNS74121
MORTAR HOE – UNNS66157
• For transferring manure or loose
materials
• For mixing mortar, concrete, plaster and spackling
• Five 12-1/2” oval forged steel tines
• 9” x 6” forged, shank pattern, perforated steel blade
• For mixing mortar,
concrete, plaster and
spackling
HOES
1 PRONG CULTIVATOR – UNNS68109
• For cultivating, weeding and aerating soil in
most soil types
• One sharp, curved, forged steel tine
• 54” ash wood handle with 10” steel
ferrule
• 2-ply radial tire
• 66” ash wood handle with
8” tube and cap
• 10” x 6” forged,
shank pattern,
perforated steel blade
• 66” ash wood handle with 8” tube and cap
HAND TOOLS
structural core
BITS, BLADES
& ABRASIVES
structural core
POWER TOOLS
16” DRAIN SPADE – UPLS72104
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
DRAIN SPADES
LANDSCAPING
• For mixing mortar, concrete, plaster and spackling
• 10”x6” forged, shank pattern, perforated steel blade
24” STEEL LEAF RAKE – UNNS64582
ASPHALT/TAR RAKE – UNNS63125
• For medium capacity leaf raking
• For large capacity leaf raking
• 18 continuous steel tine head with a
reinforcing coil steel spring brace
• 24 continuous steel tine head
with a heavy reinforcing coil
spring brace
• For spreading and leveling
asphalt and tar
• 48” tap-in hardwood handle
• 54” bolt thru hardwood handle
• 14-tine, 16” x 4” one-piece forged
steel head with long steel shank
to protect handle from heat
SAFETY SUPPLIES
19” STEEL LEAF RAKE – UNNS64106
GENERAL SUPPLIES
RAKES
WORKWEAR
191
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LANDSCAPING
RAKES
BOWHEAD GARDEN RAKE – UNNS63131
BOWHEAD GARDEN RAKE – UNNS63141
LEVEL HEAD GARDEN RAKE – UNNS63110
• For loosening and leveling mulch,
peat moss and loose soil
• For loosening and leveling
mulch, peat moss and loose
or heavy soil
• For loosening and leveling loose
soil, mulch and peat moss
• 16-tine, one-piece forged steel head
• 15-tine, 16” x 3-1/4” onepiece forged steel head
• 14-tine, 15” x 3-1/4”, one-piece
forged steel head
• 66” white ash handle
ROAD/STONE RAKE – UNNS63121
• For spreading and leveling gravel
• 14-tine, 15-1/2” x 4” one-piece
forged steel head
• 66” white ash handle
SCOOPS
BRACED STEEL SNOW PUSHER – UNNS79842
EASTERN STEEL SCOOP – UNNS50139
ICE CHISEL – UNNS81106
• For pushing medium to heavy
accumulations of snow
• For scooping grain, snow, mulch
or general purpose cleanup
• For scraping ice and other encrusted
materials from hard surfaces
• 24” x 12” ribbed steel blade for
greater durability
• #2 sized, 11” x 15” heat treated
carbon steel blade
• 3-3/4” x 6” socket pattern, industrial
gauge, forged steel blade
• 40” hardwood handle with big
grip D-grip
and wood D-grip
SIDEWALK/ICE SCRAPER – UNNS81102
• 7” x 5-1/2” shank pattern, forge,
steel blade
• 7” x 4-1/2” shank patter, welded,
steel blade
• 8-1/2” x 6” socket pattern, industrial
gauge, forged steel blade
STEEL SNOW PUSHER – UNNS79813
WESTERN ALUMINUM SCOOP – UNNS53128
WESTERN ALUMINUM SCOOP – UNNS53166
• For pushing light to heavy
accumulations of snow
• For transferring grain, snow and
loose materials and general
purpose clean up
• For transferring grain, snow
and loose materials and general
purpose clean up
• #12 sized, 14-3/4” x 18-3/4”
industrial gauge aluminum blade
• #12 sized, 14-3/4” x 18-3/4”
heavy-duty aluminum blade
and wood D-grip
• 29” fiberglass handle with
ABS D-grip
• 24” x 12” ribbed steel
blade for greater durability
WORKWEAR
SAFETY SUPPLIES
• 14” x 2-1/2” serrated/beveled sharpened blade
192
WESTERN STEEL SCOOP – UNNS53117
WESTERN STEEL SCOOP – UNNS53119
• #8 sized, 14” x 17” heat treated
carbon steel blade
• #10 sizes, 14-1/2” x 18” heat
treated carbon steel blade
and wood D-grip
and wood D-grip
Call us at: 8 00-6 6 9-778 8
LANDSCAPING
LIGHT EQUIPMENT
SCOOPS
EASTERN SCOOP – UPLS72191
MATERIAL HANDLING
• E-series super-duty NUPLAGLAS
pultruded structural core
stress points
• Injection molded clad exterior jacket of tough engineered polymer
• 4” blade
CONCRETE & MASONRY
SHOVELS
LONG HANDLE ROUND POINT SHOVEL –
HISSHIRP14L
POWER TOOLS
• Hollow back round point blades are
stamped from a single piece of steel
with forward turned step
• Handle attached with a single rivet
• 8-9/16”x11” blade
BITS, BLADES
& ABRASIVES
SHOVELS
ROUND POINT DIGGING SHOVEL –
UNNS40191
UNNS43069
• For digging and clearing trenches
• For digging in sandy, light soils
• For digging in hard, rocky soil
• 4” open back industrial gauge tempered steel blade with rolled step
• Rolled step prevents material
build up
• Closed back, tempered steel blade
for ultimate strength
• 48” white ash handle for strength
• #2 size, 9-1/4” x 11-1/2” open
back blade
• 30” premium northern white
ash handle
• #2 size, 9-1/4” x 11-1/2” open
back blade
UNNS45160
• For digging in rocky & drier soils
• For digging and excavation in
hard, rocky soils
• For digging and excavation in clay
or heavy soils
& wood D-grip
• Heavy-duty open back industrial
gauge steel blade with backbone
ribbon of steel reinforcement
along socket
• Heavy-duty open back tempered
steel blade with forward-turned
blade step
ash handle
• 48” fiberglass handle with crimped
steel collar to strengthen handle to
socket connection
GENERAL SUPPLIES
UNNS45000
LANDSCAPING
UNNS43516
• Heavy-duty, tempered steel blade
with forward-turned step for
comfort
HAND TOOLS
4” TRENCHING SHOVEL – UNNS47171
• #2 size, 9-1/4” x 11-1/2” open back blade
• For digging and excavation in hard,
rocky soils
• For digging and excavation in
hard, rocky soil
• Gets you out of big trouble
• Heavy-duty open back steel blade
with forward-turned blade step
• Largest open back, industrial
gauge, tempered steel blade
• Camping shovel
• Steel crimped collar strengthens
• 11” extended tab socket to reduce
handle breakage
ergonomic D-grip
• 27” ash wood handle with steel &
wood D-grip
• 4-3/4” x 16” open back blade
ROUND POINT UTILITY SHOVEL – UNNS45107
• Emergency trunk shovel
• #2 size, 9-1/4” x 11-1/2”
open back blade
WORKWEAR
UNNS45520
SAFETY SUPPLIES
UNNS45167
193
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LANDSCAPING
SHOVELS
SQUARE POINT TRANSFER SHOVEL –
UNNS40184
UNNS42523
UNNS44124
• For transferring sandy, light soils
• For transferring rocky & drier soils
• Rolled step prevents material
build up
• Forward-turned step for greater
user comfort
• For transferring heavy,
loose material
• 48” white ash handle for strength
• Steel and wood D-grip for
added strength
• #2 size, 9-1/4” x 11-1/2” open
back blade
• #2 size, 9-1/4” x 11-1/2” open
back blade
UNNS45161
UNNS45168
• For transferring heavy, rocky
materials
• For transferring heavy soils and
other materials
blade step
blade step
crimped steel collar to strengthen
• Largest open back, industrial
gauge, tempered steel blade
• Forward-turned blade step
for comfort
cushion end grip
ash handle
SHOVELS
D-HANDLE ROUND POINT SHOVEL –
UPLS72062
UPLS72061
UPLS72069
structural core
structural core
structural core
points
points
points
engineered polymer
engineered polymer
engineered polymer
• #2 square point heavy gauge
LONG HANDLE SQUARE POINT SHOVEL –
UPLS72075
LONG HANDLE SQUARE POINT SHOVEL –
UPLS72076
TRENCHING SHOVEL – UPLS72211
structural core
structural core
structural core
points
points
stress points
engineered polymer
engineered polymer
engineered polymer
• #2 square point heavy gauge
• 16” drain spade hollow back
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
194
Call us at: 8 00-6 6 9-778 8
LANDSCAPING
6 CU FT STEEL TRAY WHEELBARROW –
UNNS77323
• For transporting
medium to heavy
weight materials to
gathering points
• For transporting heavy
to course weight materials to gathering points
• 1.0mm deep drawn
steel tray with wooden wedges and
cross braces
• 60” hardwood handles with heavy-duty
undercarriage
• 2-ply radial tire with grease fittings
WHEELBARROWS
• Structural steel
channel undercarriage
• Cold rolled steel
channel undercarriage
• Oversized 60” North
American hardwood
handles
• Oversized 60” North
American hardwood
handles
• UV stabilized polyethylene pan is extremely
rugged and easy to clean
• UV stabilized polyethylene pan looks good and
lasts for years
BITS, BLADES
& ABRASIVES
HEAVY-DUTY 10 CU FT DOUBLE WHEEL
WHEELBARROW – BRNSHD10D
POWER TOOLS
8 CU FT DOUBLE WHEEL WHEELBARROW –
BRNSPW8D
CONCRETE & MASONRY
• 60” hardwood handles with heavy-duty
undercarriage
• 1.4mm deep drawn steel
tray with wooden
wedges and cross braces
MATERIAL HANDLING
6 CU FT STEEL TRAY WHEELBARROW –
UNNS77305
LIGHT EQUIPMENT
WHEELBARROWS
WHEELBARROW TIRE
• Saves time and money
– your wheelbarrow
“downtime” is history
• Better, easier control – charge over those
jagged rocks and 2 x 4’s filled with sharp
nails...NO PROBLEM
GENERAL SUPPLIES
• Greater load capacity – plus, it’s much easier
to push and turn
LANDSCAPING
• Lifetime guarantee –
unprecedented in the
wheelbarrow tire
industry
HAND TOOLS
FLAT-FREE WHEELBARROW TIRE –
CFTSWA-EVER-6
SAFETY SUPPLIES
WORKWEAR
195
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
LANDSCAPING
WATER HOSES
5 PLY HEAVY-DUTY WATER HOSE
6 PLY RUBBER COMMERCIAL WATER HOSE
6 PLY RUBBER COMMERCIAL WATER HOSE –
GILS29-58100
• GILS26-58050 – 5/8” x 50’
• GILS25-34050 – 3/4” x 50’
• 5/8” x 100’
• GILS26-58075 – 5/8” x 75’
• GILS25-34075 – 3/4” x 75’
• 6-ply construction
• GILS25-34100 – 3/4” x 100’
• 500 PSI burst strength
• Flexible in all weather conditions
• Double reinforced for
commercial strength
• Protective collar resists kinks at faucet
• Double reinforced for commercial strength
• Full-flo brass couplings
• EZ-on coupler for easy faucet connection
• Heavy-duty brass couplings with O-ring for
tight seals
6-PLY FLEXOGEN WATER HOSE –
GILS10-34100
BRASS NOZZLE-TWIST JET – GILS528
DOUBLE HOSE Y CONNECTOR – GILS08Y
• Four large openings at nozzle tip
for full flow
• Longer legs at less angle reduce hose kinking
• Replaceable front and rear O-ring
seals for leakproof shut off
• Includes durable, impact resistant, rustproof polymer end cap
for single hose use
POWER TOOLS
• 3/4” x 100’
• Over 500 PSI burst
strength
• Double tire cord reinforced for strength
• Flow Guard Plus protective collar resists kinks
at faucet
• Precise tip angle eliminates
side spray
• Rugged zinc die cast construction
• Adjustable from fine spray to
needle stream to heavy rinse
• Fast 3 turns from closed to open
• Heavy-duty solid brass construction
NYLON HOSE MENDER – GILS01F
NYLON HOSE MENDER – GILS01HM
NYLON HOSE MENDER – GILS01M
• Fits all 5/8” or 3/4”
• Fits all 5/8” or 3/4”
• Fits all 5/8” or 3/4”
RUBBER HOSE SEALS – GILS01RW
STANDARD GRIP METAL NOZZLE – GILS573TF
WEEPER HOSE – GILS27-58050
• Heavy-duty rubber
construction
• Male threaded front for attaching
accessories
• 5/8” x 50’
• Solid brass valve system with
permanent adjusting nut
• Provides gentle, even soaking as water “weeps”
through thousands of pores
• Hold-open clip for continuous
spraying
• For precise watering around
plants and beside flower beds
• Rust resistant stainless steel spring
• Saves water by reducing evaporation
• Heavy-duty, full size, die cast zing body
• Use above ground or buried
• Weather and wear resistant 100%
recycled vinyl
• Durable brass couplings
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Lightweight, coils and handles easily in all
weather
• Heavy-duty brass couplings with O-ring for
tight seals
196
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
RENFER
RD STEEL STRAP SEALER
STEEL BANDING
• 3/8” to 3/4” strap
tensioner
• CRCSMIP-1100-3/4 –
3/4” band sealer
• CRCS3/4X020 – 3/4” x .020
• Strap gauge range
(.015 to .025)
• CRCSMIP-1100-5/8 –
5/8” band sealer
• CRCS5/8X020 – 5/8” x .020
• Double notch, down cut, front action
• Strap gauge range (.015 to .023)
MATERIAL HANDLING
FEEDWHEEL STEEL STRAP TENSIONER –
CRCSMIP-1300
LIGHT EQUIPMENT
BANDING
CONCRETE & MASONRY
STRAP DISPENSER – CRCSMIP-5200
• Heavy-duty steel and
poly dispenser
• One size fits 16 x 3,
16 x 6 10” wheels
POWER TOOLS
BAR TIES
BAR TIES
• MARS4IN-16GA – 4”
BITS, BLADES
& ABRASIVES
• MARS4-1/2IN-16GA – 4-1/2”
• MARS5-1/2IN-16GA – 5-1/2”
• MARS6-1/2-16GA – 6-1/2”
HAND TOOLS
• 16 gauge
• Quick and efficient means of tying reinforcing
steel (bar ties) for closing packages of
various types
• Measured from tip to tip
LANDSCAPING
BINOCULARS
PERMAFOCUS BINOCULARS – JSNS17-5010
• 7mm x 35mm
• 7mm x 50mm
• 10mm x 50mm
• Fully coated optics for
superior light transmission
and brightness
superior light transmission and brightness
superior light transmission
and brightness
• Unique “focus-free” feature stays in focus at
most viewing distances
• Non-slip rubber armor absorbs shock while
providing a firm grip
SAFETY SUPPLIES
GENERAL SUPPLIES
WORKWEAR
197
LIGHT EQUIPMENT
GENERAL SUPPLIES
CARPENTER PENCIL
CARPENTER PENCIL SHARPENER – KESSCP2
CONCRETE & MASONRY
MATERIAL HANDLING
• Produces square, flat tips
• Easy-to-use: one side sharpens horizontally while the
other side sharpens vertically
• Carbon steel blades are ice
hardened, ground and honed for durability
• Body is 10% glass filled ABS plastic
• Virtually indestructible
BARREL PUMP
PROFESSIONAL BARREL PUMP – PLWS55125
POWER TOOLS
• Multi-directional handle
• Lever style barrel pump with
non-drip spout
• Equipped with brass rings and a
floating piston design
BITS, BLADES
& ABRASIVES
• Self-adjusting telescopic
suction tube
• Designed to pump all lubrication
based fluids, antifreeze, agricultural
and industrial non-corrosive fluids
• Dispenses approximately 12 oz./stroke
HAND TOOLS
• Fits 30-55 gal. drum
BUCKET
ROUNDS INDUSTRIES
BUCKET – BLTS10392/10395
BUCKET – BLTS5950001399
• 5 gal.
• Lid to fit
5 gal. bucket
• White, plastic pail
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Lid sold separately
198
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
BUNGEE CORDS
BUNGEE CORDS
MATERIAL HANDLING
• ERIS914 – 10” rubber strap
• ERIS152-15 – 15” rubber strap
CONCRETE & MASONRY
• WARNING: Sudden rupture or disconnect
from anchor while in a stretched position can
cause serious injury
• Wear safety glasses during tie down and
disconnect
POWER TOOLS
• Not to be substituted as a primary tie down
device for load
• Inspect each strap before each use and
discard if cut, cracked or abraided
• Max safe stretch: 50% of length of
rubber strap
BITS, BLADES
& ABRASIVES
CAULK GUNS
1/10 GAL HEX ROD PARALLEL FRAME –
CAUS111
1/10 GAL RATCHET ROD CRADLE – CAUS33
• 10:1 thrust ratio
• Drip free spring clip
• E-Z thrust
• E-Z thrust
• E-Z load front cap
• All steel welded
construction
• Seal puncture tool
• Cartridge retainer spring
• Built in spout cutter
• Ladder hook
HAND TOOLS
1/10 GAL DRIP FREE HEX ROD CRADLE –
CAUS102D
• Ladder hook
1/10 GAL SMOOTH ROD CRADLE – CAUS67D
1/4 GAL SMOOTH ROD CRADLE – CAUS105
• Thumb release
• Drip free spring clip
• All steel welded
construction
• Built-in spout cutter
• Built-in spout cutter
• Ladder hook
300 ML X 300 ML VERTICAL APPLICATOR –
CAUS515
• Revolving barrel
• Thumb release
• Easily converts in
just seconds to
300ml x 150ml and
150ml x 150ml
• Zinc alloy handle
• Built in static mixer cutter
• Double reinforced steel support rods
• Snap on/snap off push disks
• T-bar
• Ladder hook
45” 1/4 GAL “STANDARD” SMOOTH ROD –
CAUS132
• Reversible 2-in-1 joist guide
• Cartridge retaining bars
SAFETY SUPPLIES
1/10 GAL SUPER SMOOTH ROD – CAUS250
GENERAL SUPPLIES
• Ladder hook
LANDSCAPING
1/10 GAL SMOOTH ROD CRADLE – CAUS22
WORKWEAR
199
LIGHT EQUIPMENT
GENERAL SUPPLIES
CHALK
JET BLACK CHALK REFILL – IRWS65207
• High visibility chalk for self
chalking line reels
• For use on a variety of surfaces including wood, drywall,
concrete, stone and metal
• Permanent color produces long lasting lines
that won’t fade
• Chalk containers are filled by weight
not volume
CHALK
ULTRA FINE MARKING CHALK
ULTRA FINE MARKING CHALK
• KESS105B – blue
• KESS8B – blue
• KESS105GO – hi-viz orange
• KESS8GO – hi-viz orange
• KESS105R – red
• KESS8R – red
• KESS105W – white
• KESS8Y – yellow
• KESS105Y – yellow
• 8 oz.
• 5 lb.
• Formulated to achieve a perfect line every time
• Formulated to achieve a
perfect line every time
• Brilliant color oxides added to assure constant
color tones for strong sharp lines
• Brilliant color oxides added to assure constant
color tones for strong sharp lines
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 2.5 lb.
200
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
CHALK LINE REELS
• 100’
• 100’
• Retrieves chalk line 3-1/2
times faster than a standard
chalk reel
• Steel plated hook and large
grip anchor ring provide
better holding power
• Crank handle clutch release
allows release of the line without spinning the
crank handle
• Retractable self locking
metal handle allows reel to be used as a
plumb bob
• Lightweight ABS impact resistant case
increases durability
• Twisted cotton line holds more chalk for
multiple strikes
• Patented hook storage and door locking
mechanism virtually eliminates spills and
line tangles
• Holds approximately 2 oz. of chalk
CONCRETE & MASONRY
METAL CHALK LINE REEL – IRWS64110
MATERIAL HANDLING
FAST RETRIEVE CHALK LINE REEL –
IRWS64311
• Twisted cotton line holds more chalk for
multiple strikes
POWER TOOLS
• Holds approximately 2 oz. of chalk
CHALK LINE REELS
PROLINE GIANT CHALK LINE REEL –
KESSG130
PROLINE LITTLE GIANT CHALK LINE REEL –
KESSG100
• 100 polyester line rewinds
3-1/2 times faster
• Extra long 13’ heavyduty cord and pull ring
• Long 100’ heavy-duty
cord and pull ring
• Quick fill rubber grommet
• Holds 1 lb. of chalk for
less refills
• Hooks easily to a utility
belt and holds almost
1 lb. of chalk
• Free wheeling disengage
gear for ease of use
PROLINE QUICK FILL CHALK LINE REEL –
KESSFB2
HAND TOOLS
• One piece steel crank
for extra long life
• ABS case
BITS, BLADES
& ABRASIVES
PROLINE CHALK LINE REEL – KESSGB1
• Sturdy cycolac case and
100’ spun polyester line
LANDSCAPING
• Filling is as easy as
inserting the chalk bottle spout and squeezing
• When spout is removed,
the grommet self seals
100’ DIE CAST CHALK LINE REEL –
STNS47099
100’ FATMAX CHALK LINE REEL & CHALK SET
– STNS47-681L
• Durable, heavy-duty die
cast body for extra long life
• 100’ FatMax chalk line reel
• 4 oz. bottle of blue chalk
and aluminum line level
• Universal hook has been
designed to endure the
rigors of everyday use
SAFETY SUPPLIES
• Long-wearing felt gasket
hugs line and distributes
uniform chalk coating
GENERAL SUPPLIES
CHALK LINE REELS
• Can be used as a plumb bob
WORKWEAR
201
LIGHT EQUIPMENT
GENERAL SUPPLIES
SUPER GLUE
SUPER GLUE – PERS82191
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• 2 g tube, gel
• No run gel formula “stays
put” for precise application
• Also ideal for overhead or
hard to reach surfaces
• Chrome, aluminum, stainless
steel and enamel finishes
THREADLOCKER
THREADLOCKER – PERS24210
• 10 mL bottle
• 50 mL bottle
• 10 mL bottle
• OEM specified
• OEM specified
• All purpose, medium
strength threadlocker
• All purpose, medium
strength threadlocker
• Permanent strength
threadlocker-red
• Ideal for all nut and bolt
applications 1/4” to 1”
• Smooth side for general
purpose cleaning
• Locks and seals while preventing parts from loosening due to vibration
• Especially well-suited for
permanently locking
studs and press fits
• Replaces set screws and snap rings
• Locks against vibration loosening
• Protects threads from corrosion
BITS, BLADES
& ABRASIVES
• OEM specified
• 50 mL bottle
• High strength
threadlocker-red
• Biodegradable, non-toxic
and petroleum solvent free
• Fortified with premium skin conditioners
SEALANT
SEALANT – PERS80011
SEALANT – PERS80632
SILICONE – PERS80022
• 11 oz. tube
• 4 oz. can
• 3 oz. tube
• Form-a-gasket #2
• Thread sealant with Teflon
• Slow drying, non hardening sealant designed
for sealing cut gaskets
and stamped parts
• Economical general
purpose fitting sealant
• Sensor safe blue RTV
silicone gasket maker
• Makes reliable “formed
in place” gaskets that resist cracking, shrinking and migrating
• Can be used on any moving parts to provide better,
longer lasting lubrication
• Can be used in applications up to 350 deg. F
• Will not foul oxygen sensors
• Use during assembly to
prevent galling, corrosion
and seizing and to assure
easier disassembly
• Ideal for marine use
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• OEM specified
202
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
CLEANER – PERS80079
LIGHT EQUIPMENT
CARB CLEANER
• 16 oz. aerosol
MATERIAL HANDLING
• Motor muscle carb &
choke cleaner
• Cuts and removes grease,
gum and varnish
• Outperforms tapes and
pipe dopes
CONCRETE & MASONRY
• Seals and resists pressure in air, oil, diesel
fuel and hydraulic system.
• Remains pliable at higher and lower
temperatures
LUBRICANTS
LUBRICANT – PERS81943
• 8 oz. brush top bottle
• 12 oz. aerosol
• Anti-seize lubricant
• Ultra slick synthetic
multi-purpose lubricant
• Highly refined blend of
aluminum, copper and
graphite lubricants
• Oxygen sensor safe
• Works on both porous and non porous
materials
BITS, BLADES
& ABRASIVES
• OEM certified
• Designed for wheel bearing and general chassis
lubrication
POWER TOOLS
LUBRICANT – PERS80078
LUBRICANTS
WD40 – WDOS10016
• WDOS10000 – 1 pt.
spray unit
• 16 oz. spray
• WDOS10008 – 8 oz. spray
• Protects metal and gears
from rust and corrosion
• WDOS10010 – 1 gal.
• Penetrates stuck parts
LANDSCAPING
• WDOS10011 – 11 oz. spray
HAND TOOLS
WD40
• Protects metal from rust
and corrosion
• Penetrates stuck parts
• Displaces moisture
CLEANERS
GLASS CLEANER – PERS82544
• 20 oz. aerosol, brake and
parts cleaner
• 20 oz. aerosol
• Aggressively penetrates,
dissolves, and removes oil,
grease, brake fluid
• Dries fast with no residue
• Multipurpose glass cleaner
made with an original “no
streak”, non running
orange scent
• Professional strength glass
cleaner can be used on a
variety of surfaces
• Not for sale in California
WORKWEAR
• Contains no ODC’s
SAFETY SUPPLIES
CLEANER – PERS82606
GENERAL SUPPLIES
• Lubricates just about anything
203
LIGHT EQUIPMENT
GENERAL SUPPLIES
CLEANER/DEGREASER
CLEANER/DEGREASER – PERS79032
CONCRETE & MASONRY
MATERIAL HANDLING
• 1 qt. spray bottle
• “Orange Blast”
greased lightning
• Uses the power of real
orange oil to tackle a wide
variety of industrial cleaning
applications
• Removes grease, lubricants,
tar, wax, food stains, grout and mildew
• CNO petroleum solvents and can be diluted
with water
• Non-flammable, non-abrasive
10 lb. BOX OF RAGS – RAGS10lb.
• 10 lbs.
• 25 lbs.
• 50 lbs.
• Assorted scraps
• Assorted scraps
• Assorted scraps
BITS, BLADES
& ABRASIVES
POWER TOOLS
RAGS
50 lb. BOX OF RAGS – RAGSK160
LANDSCAPING
HAND TOOLS
• 50 lbs.
• All white assorted
scraps
SHOP TOWELS
11X9 ROLL SHOP TOWELS – RAGS9365B
• 11” x 9” towels
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Blue
204
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
TOWELS
WYPALL X60 TOWELS – KIMS34790
• 126 per pack
MATERIAL HANDLING
• 9.1”x16.8”, white towels
• Pop-up box
• Reinforced for extra scrubbing
and cleaning power
• Tough enough for big jobs –
soft enough for face and hands
CONCRETE & MASONRY
HAND WIPES
HANDCLEANER – PERS25072
• 30 ct wipes
• 72 ct wipes
• Remove the toughest
grease, tar, grime, ink
plants, sealants, adhesives
and other difficult soils
• Remove the toughest
grease, tar, grime, ink
plants, sealants, adhesives
and other difficult soils
• Textured surface on one side
that is ideal for cleaning
• Textured surface on one
side that is ideal for cleaning
• Smooth side for general purpose cleaning
• Contains no harsh chemicals, mineral oils
or ammonia
POWER TOOLS
BITS, BLADES
& ABRASIVES
• Smooth formula gently deep cleans the
toughest dirt
HAND CLEANERS
• 14 oz., blue label cream
• 4-1/2 lb., blue label cream
• 7-1/2 oz.
• Waterless, takes off many difficult to remove substances
• Waterless, takes off many difficult to remove substances
• Fast Orange-smooth
• Gentle on hands, no
greasy feeling
• Gentle on hands, no
greasy feeling
toughest dirt
• Biodegradable, waterless, petroleum solvent-free hand cleaner
• Contains no harsh chemicals,
mineral oils or ammonia
toughest dirt
• 15 oz.
• 1/2 gal.
• 1 gal.
• Biodegradable, waterless,
petroleum solvent-free
hand cleaner
hand cleaner
• Biodegradable, waterless, petroleum solvent-free hand cleaner
• Contains no harsh
chemicals, mineral oils
or ammonia
toughest dirt
• Ideal for all nut and bolt
applications 1/4” to 1”
• Locks and seals while preventing
parts from loosening due to vibration
• Protects threads from corrosion
SAFETY SUPPLIES
toughest dirt
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
WORKWEAR
205
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
HAND CLEANERS
HAND CLEANER – PERS25108
HAND CLEANER – PERS25116
• 7-1/2 oz.
• 15 oz.
• 1/2 gal.
• Fast Orange-pumice
hand cleaner
petroleum solvent-free hand
cleaner
• Biodegradable, waterless, petroleum solventfree hand cleaner
toughest dirt
toughest dirt
• Contains no harsh
chemicals, mineral oils
or ammonia
• 1 gal.
• 14 oz.
• 4-1/2 lb.
cream formula
cream formula
• Pure, fresh smelling
natural citrus power
cleans deep down to
remove the most stubborn grease and grime
• Pure, fresh smelling natural citrus power cleans
deep down to remove
the most stubborn
grease and grime
petroleum solvent-free hand
cleaner
• High strength product that is
applied to fasteners 3/8” to
1” in size before assembly
• Designed for securing parts that must withstand heavy shock, vibration, or extreme
chemical or environmental conditions
• Biodegradable, non-toxic and petroleum
solvent free
• Fortified with premium skin conditioners
• 14 oz.
• 4-1/2 lb.
• 60 oz., without pump
cream formula
cream formula
• Painter’s Clean
• Pure, fresh smelling
natural citrus power
cleans deep down to remove the most stubborn grease and grime
• Pure, fresh smelling natural
citrus power cleans deep
down to remove the most
stubborn grease and grime
• Works on both porous and non porous
materials
• Safer alternative to harsh, drying
and potentially toxic solvents and
thinners
• Removes grease, lubricants, tar,
wax, food stains, grout and mildew
• CNO petroleum solvents and can be diluted
with water
• Non-flammable, non-abrasive
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
toughest dirt
206
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
TRASH BAGS
TRASH BAGS
• GEFSCB365820M –
60 gal. drum liners
• GEFSCCB720 –
3 mil 20 count
• GEFSR38632BK –
2 mil/100 per box
• GEFSCCB750 –
3 mil 50 count
MATERIAL HANDLING
DRUM LINERS
BRUTE CONTAINER LID
TILT TRUCK, STANDARD DUTY – RUBS1305
• RUBS2632 – 32 gal.
• RUBS2631 – 32 gal. lid
• RUBS2643 – 44 gal.
• 1/2 cubic yard, 750 lb.
capacity gray container
• RUBS2655 – 55 gal.
• All plastic, professional grade construction will not rust,
chip or peel; resists dents
• All plastic, professional
grade construction will
not rust, chip or peel; resists dents
• Reinforced rims add strength and durability
• Strong, snap-on lids for secure, stable
stacking
• Built in handles allow easy, non-slip lifting and
anti-jam nesting
FLOUR CITY BRUSH/FLO-PAC
• 482-36
• 9824
• Popular cotton dust
mop head
• Economy mop head
features 4-ply, 100%
cotton yarn, cut end,
narrow band and two
sewn, with excellent
absorbency
• Handle and frame sold separately
• Good for use in food service settings, schools,
stores or industrial applications
LANDSCAPING
ECONOMY WET MOP HEAD-COTTON –
FLOS36982400
HAND TOOLS
DUST MOP HEAD, COTTON – FLOS364823600
• 5” wide x 36” long
• Inset wheels, protect walls and fixtures
BITS, BLADES
& ABRASIVES
MOPS
• Canvas backing is good for longevity and
launderability
• Constant force design allows for controlled
dumping by one person
• Smooth surface is easy to clean and resists
pitting and corroding
• Double ribbed base increases stability and
dragging capacity
• Key hole back with
ties and sewn fibers
to pick up more dust
• Easy to handle and
maneuver through
commercial doorways
and onto elevators
POWER TOOLS
BRUTE CONTAINER
CONCRETE & MASONRY
TRASH CONTAINERS
• Handle sold separately
MOP BUCKET WITH RINGER – RUBS7580
• Smooth, easy-to-clean surfaces
SAFETY SUPPLIES
• Predominantly plastic, nonmarking casters for reduced
touch up cleaning
GENERAL SUPPLIES
MOP BUCKET
WORKWEAR
207
OIL ABSORBENT
OIL DRI PREMIUM ALL PURPOSE FLOOR
ABSORBENT – OILS50lb.
• 50 lb. bag-clay
• Superior moisture extraction
process increases absorption
and minimize dust
• Increased hardness improves
traction, reduces slaking and
makes cleanup easier
CLEANING SUPPLIES
COTTO WAXO
FLOOR SWEEPING COMPOUND –
COTS-300lb.-OIL
COTS-45lb.-WAX
COTS-80-LBOIL
• 300 lb., oil based
• 45 lb., wax based
• 80 lb., oil based
• Sand free, will not scratch finely
finished floors
• Free of oil, sand and water
• Sand free, will not scratch finely
finished floors
• Can be used on ordinary wood
and concrete, metal-painted or
sealed wood, painted concrete,
mosaic tile, ceramic tile or vitreous tile
• Recommended for all finished
floors
• Can be used on rubber and
asphalt tile, plus linoleum, cork,
mastic, waxed, marble, terrazzo or composition floors
• Can be used on ordinary wood
and concrete, metal-painted or
sealed wood, painted concrete,
mosaic tile, ceramic tile or vitreous tile
CONSTRUCTION
CALCULATORS
CONCRETECALC – CIIS4220
CONSTRUCTION MASTER PRO – CIIS4060
SCALE MASTER II – CIIS6130
• Work smarter and improve
your bottom line
• Work smarter and improve
your bottom line
• Eliminate costly mistakes and
improve profits
• Handles all fractions
• Portable, digital take-off tool
with 91 built in scales &
optional PC interface
• Perform instant square-ups
and layouts
• Accurately estimate material costs & volumes
builders, general contractors,
construction foremen, or
superintendents, carpenters,
framing contractors, concrete/foundation
contractors, remodelers and other construction pros
• For construction estimators,
contractors or anyone who
works with blueprints
• You no longer have to deal with tedious or
repetitive calculations—common building formulas are built in
• Memory storage keys
• Paperless tape
• Much, much more
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
208
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
COUNTER
HAND HELD TALLY METER – KESSTM100
MATERIAL HANDLING
• Thumb operated
mechanical meter
• Counts up to 9999 and can
be tallied without resetting
4 OZ CONE CUP – SOLS4BR
4.25 OZ CONE CUP – SOLS42BR
• Straight edge cone cup
• Paper rolled rim cone cup
• Paper rolled rim cone cup
• 250 per sleeve
• 200 per sleeve
• 200 per sleeve
5 OZ CONE CUP – SOLS155BB
• 250 per sleeve
• 250 per sleeve
POWER TOOLS
CONCRETE & MASONRY
CUPS
BITS, BLADES
& ABRASIVES
DRINK MIX
• 1 gal.
• 2-1/2 gal.
• Lemon Lime
• Lemon Lime
• Lemon Lime
• Ready-to-drink
• Powder mix
• Powder mix
GATORADE – GADS03967
• 6 gal.
• 1 gal.
• 20 oz. bottle
• Lemon Lime
• Lemon Lime
• Fierce Grape
• Powder mix
• Liquid concentrate
• Ready-to-drink
• 20 oz. bottle
• 1 gal.
• 2-1/2 gal.
• Orange
• Orange
• Orange
• Ready-to-drink
• Powder mix
• Powder mix
• 6 gal.
• 20 oz. bottle
• 1 gal.
• Orange
• Riptide Rush
• Riptide Rush
• Powder mix
• Ready-to-drink
• Powder mix
SAFETY SUPPLIES
• 20 oz. bottle
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
WORKWEAR
209
DRINK MIX
• 2-1/2 gal.
• 6 gal.
• 20 oz. bottle
• Riptide Rush
• Riptide Rush
• Glacier Freeze
• Powder mix
• Powder mix
• Ready-to-drink
• 1 gal.
• 2-1/2 gal.
• 6 gal.
• Glacier Freeze
• Glacier Freeze
• Glacier Freeze
• Powder mix
• Powder mix
• Powder mix
• 20 oz. bottle
• 1 gal.
• 2-1/2 gal.
• Fruit Punch
• Fruit Punch
• Fruit Punch
• Ready-to-drink
• Powder mix
• Powder mix
• 6 gal.
• 1 gal.
• Fruit Punch
• Pump for concentrate mix
• Powder mix
FLASHLIGHTS
ECONOMY FLASHLIGHT – EVRS-E251Y
HEAVY-DUTY FLASHLIGHT – EVRS-1251
HEAVY-DUTY FLASHLIGHT – EVRS-1351
• 2 D size batteries
(not included)
(not included)
(not included)
• High visibility
safety yellow
• Bright krypton bulb
• Bright krypton bulb
• Unbreakable shatterproof lens
• Unbreakable shatterproof lens
• Magnet on side to mount to toolbox
• Non-roll feature
• Non-roll feature
• Flip ring on the end to hang
• Super tough chemical resistant, high visibility
yellow casing
• Super tough chemical resistant, high visibility
yellow casing
• Non-conductive hanger ring
• Non-conductive hanger ring
• Spare bulb holder (inside)
• Spare bulb holder (inside)
• Ribbed non-slip grip
• Ribbed non-slip grip
• Self-cleaning external switch contacts
• Self-cleaning external switch contacts
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
• Uses 6 v battery
(not included)
• Weatherproof
• High visibility yellow
plastic case
WORKWEAR
SAFETY SUPPLIES
LANTERN – EVRS-5109IND
210
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
HELMET LITE HOLDER – PEAS700
M6 LITHIUM FLASHLIGHT – PEAS2330C
• Made of corrosion
proof ABS polymer
• Fits 1900C, 2270C, 2300C
• Extreme brightness
and durable construction enables his flashlight to withstand rugged conditions
• Equipped with
adjustable beam with
large on/off switch and
comfortable forehead pad
• Free cordura holster and 2 CR123 lithium
batteries
• Designed to provide hands free light to the
exact area desired
CONCRETE & MASONRY
• Expandable strap allows you to securely attach
to helmets, hard hats, caps and barehead
• Rotates up and down with special ratcheted
locking system
• CSA, MSHA, FM and CE EX approved
MAGNUM MITYLITE – PEAS2300C
MITYLITE 2AAA – PEAS1900C
• Not submersible, water
resistant
• Water resistant
• Submersible, watertight to 500 feet
• Unbreakable ABS housing with high impact polycarbonate lens
• Xenoy unbreakable
chemical resistant resin
• Focused beam that is 600% brighter than
ordinary personal lights
• Unbreakable space age
high impact polycarbonate resin
POWER TOOLS
KING PELICAN LITE – PEAS4000LS
• 12 volt, 14 watt,
100,000 candlepower
MATERIAL HANDLING
HEADS UP LITE – PEAS2600RS
LIGHT EQUIPMENT
FLASHLIGHTS
• Its laser spot xenon lamp module can cut
through water, smoke, fog and rain
• Rotary on/off switch
• Takes 3 AAA batteries
BITS, BLADES
& ABRASIVES
• Compact, 4-3/4”, light weight and equipped
with a shirt clip
• CSA, ex (CE) and UL approved
REPLACEMENT BULB – PEAS1904
• Latest addition to the
VersaBrite family in an
LED version
• Replacement bulb for
PEAS1900C
PEAS2000C
• Dual super bright white LEDs never need
replacing and provide over 100 hours of
battery usage
• Exclusive state-ofthe-art laser spot
xenon lamp module
LANDSCAPING
• Body made of virtually indestructible xylex
HAND TOOLS
MITYLITE PLUS 2AA – PEAS2220C
• Light is turned on when the head is flipped up
• Swivel head pivots a full 180 degrees for light
where you need it
• Multiple use built-in clip attaches to surfaces
up to 1/2” thick
PEAS2270C
PEAS2300C
PEAS4000LS
GENERAL SUPPLIES
• CE EX approved
SAFETY SUPPLIES
WORKWEAR
211
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
FLASHLIGHTS
REPLACEMENT LENS – PEAS2003-920-100
REPLACEMENT LENS – PEAS2303-820-100
SUPER SABRELITE – PEAS2000C
• Replacement lens for
PEAS2000C
• Replacement lens for
PEAS2300C
• Submersible to 150m
• Made of lightweight lexan
EXL 9330 with nylon over
molded lens and shroud
• Includes a belt clip, stainless steel split ring
and black lanyard allowing the flashlight to be
attached to a pocket, belt or hand
POWER TOOLS
CONCRETE & MASONRY
• Rotary on/off switch
• 3 C cell batteries (not included)
• FM, CSA, MSHA, AUS, UL, CE, EX approved
VERSABRITE II BIG BEAM – PEAS2270C
• Made of xenoy/
polycarbonate material
• Multiple position swivel head
allows you to point light bright
beam in any direction
• Securely clips on to visors, caps
and clothing
• Includes 2-AA cell alkaline batteries
• FM, CSA, MSHA, CENELEC approved
FLASHLIGHTS
MAGLITE D 2 CELL FLASHLITE –
MAGSS2D016
MAGSS3D016
MAGSS4D016
• Black
• Black
• Black
• High intensity adjustable light beam
• Recessed, push button, self-cleaning
3-position switch
3-position switch
3-position switch
• Rugged, machined aluminum
construction
construction
• Anodized inside and out for improved corrosion resistance
• ARL listed
• Water and shock resistant
• Spare lamp safely secured inside the tailcap
MINI MAGLITE AAA-CELL FLASHLIGHT –
MAGSM3A016
MINI MAGLITE AAA-CELL FLASHLIGHT –
MAGSM3A116
MINI MAGLITE AA-CELL FLASHLIGHT –
MAGSM2A016
• Black
• Blue
• Black
• Converts quickly to a freestanding
candle mode
candle mode
candle mode
construction
construction
construction
• Built-in thermostat
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Water resistant
212
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
REPLACEMENT BULB – MAGSLM2A001
REPLACEMENT BULB – MAGSLWSA301
ENERGIZER LITHIUM PHOTO BATTERY –
EVRSEL123APB2
ENERGIZER WATCH BATTERY –
EVRSECR2032BP
ENERGIZER INDUSTRIAL – EVRS-EN92
• Used predominantly in
film cameras
• Lithium coin cell battery
• AAA battery
• Designed for watches, remote
keyless entry for vehicles, etc.
• Designed for long lasting performance in the broadest range of device
applications
LIGHT EQUIPMENT
FLASHLIGHTS
• Replacement are bulbs available
MATERIAL HANDLING
CONCRETE & MASONRY
construction
• Anodized inside and out for
improved corrosion resistance
POWER TOOLS
• Spare lamp safely secured
inside the tailcap
BATTERIES
• Also used in high end flashlight
and in several medical devices
BITS, BLADES
& ABRASIVES
• #1 selling photo battery size
• Seven year shelf life
• No added mercury
HAND TOOLS
• Operates well in extreme
temperatures
• Lithium batteries have an estimated shelf life
of up to 10 years
• AA battery
• C battery
• D battery
• Designed for long lasting performance in the broadest range of
device applications
• Designed for long lasting performance in the broadest range
of device applications
• Designed for long lasting
performance in the broadest
range of device applications
• 6 v spring top battery
• 9 v battery
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
WORKWEAR
213
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
LIGHTING
1000 WATT HALOGEN 2-IN-1 TWIN HEAD TRIPOD WORKLIGHT – DESSL14
250 WATT HALOGEN CLAMP LIGHT –
DESSL850
500 WATT HALOGEN PORTABLE WORKLIGHT –
DESSL33
• Telescopes from 40” to 67”
with “easy grip” locking nuts
• Professional grade
construction
• “S” stand with foam
grip handle
• Portable sled base and tripod
base included
• Heavy-duty spring
loaded clamp
• Weatherproof
on/off switch
• Weatherproof on/off switches
• Vinyl coated hanging hook
• Complete with two 500 watt
halogen bulbs
• Weatherproof on/off switch
• Complete with 500 watt
halogen bulb
• Complete with 250 watt halogen bulb
• UL & CUL listed
• UL & CUL listed
• UL & CUL listed
250 WATT 3” T-3 LAMP – DESSL96
500 WATT 4-5/8” T-3 LAMP – DESSL16
500 WATT 4-5/8” T-3 ROUGH SERVICE LAMP
– DESSL716
• Replacement bulb
25’ 14 GA POLAR/SOLAR PLUS OUTDOOR
EXTENSION CORD – EEES01487
• UL Listed-meets OSHA
requirements for outdoor use
• T*Prene insulation
• Outer jacket is flame retardant
and water resistant
• Outer jacket is flame retardant and water resistant
• Features a power indicator light in the
female receptacle
female receptacle
BULB BUDDY HALOGEN BULB STORAGE CASE
– DESSL-15
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Holds six replacement
halogen bulbs-150 watt
to 500 watt
• Heavy-duty plastic case
with foam inserts that
protect bulbs from damage
• Complete with six 500 watt halogen bulbs
CORDS
• Outer jacket is flame
retardant and water
resistant
GENERAL SUPPLIES
female receptacle
• UL listed-meets OSHA
requirements for
outdoor use
requirements for
outdoor use
female receptacle
female receptacle
female receptacle
WORKWEAR
SAFETY SUPPLIES
214
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
female receptacle
female receptacle
100’ 14 GA EXTENSION CORD – EEES02409
• UL listed – meets OSHA
specifications for
outdoor use
specifications for
outdoor use
specifications for
outdoor use
• Vinyl jacket resists moisture,
abrasion and prolonged
exposure to sunlight
• Vinyl jacket resists
moisture, abrasion and
prolonged exposure to
sunlight
• Vinyl jacket resists
moisture, abrasion and
prolonged exposure to
sunlight
• Orange
• Orange
6’ 12GA DUPLEX BOX – EEES02822
ATTACHABLE 12 GA GFCI – EEES02831
2’ 12 GA MOLDED TRI-SOURCE THREE WAY
POWER BLOCK GFCI – EEES02832
• UL listed and meets
OSHA specifications
• Connect cords, tools, etc (up to
12GA) to make them comply
with OSHA’s GFCI requirements
• Orange
• Provides personal protection from ground faults and
open neutral conditions
• Supplied with sealant to make
unit rainproof
• Vinyl jacket resists moisture,
abrasion and prolonged exposure to sunlight
• Orange
OSHA specifications
• Provide personal protection
from ground faults and open
neutral conditions
• Protection for the jobsite, plant floor
or workshop
• High impact power block with
T*Prene insulation and power
indicator light
• High impact power block with
T*Prene insulation and power
indicator light
requirements
requirements
• Plug in up to three tools in this
unique female receptacle
• Innovative four way power block provides
additional outlets
• Rugged T*Prene insulation
• Outer jack is flame retardant and
water resistant
water resistant
25’ 12 GA POLAR/SOLAR PLUS QUADNECTOR
FOUR-WAY POWER BLOCKS – EEES04427
FOUR-WAY POWER BLOCKS – EEES04428
100’ 12 GA POLAR/SOLAR PLUS QUADNECTOR FOUR-WAY POWER BLOCKS –
EEES04429
• High impact power block
with T*Prene insulation
and power indicator light
requirements
requirements
requirements
additional outlets
additional outlets
additional outlets
water resistant
water resistant
water resistant
• Provide personal protection
from ground faults and open
neutral conditions
• Protection for the job site,
plant floor or workshop
WORKWEAR
OSHA specifications
SAFETY SUPPLIES
FOUR WAY POWER BLOCK – EEES04422
GENERAL SUPPLIES
2’ 12 GA POLAR/SOLAR PLUS TRI-SOURCE
THREE WAY POWER BLOCK – EEES03482
LANDSCAPING
50’ 12 GA MOLDED TRI-SOURCE THREE WAY
POWER BLOCK GFCI – EEES02838
HAND TOOLS
• Protection for the jobsite, plant floor
or workshop
specifications for outdoor use
BITS, BLADES
& ABRASIVES
requirements for
outdoor use
POWER TOOLS
requirements for
outdoor use
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
CORDS
215
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
CORDS
REPLACEMENT PLUG – EEES05990
REPLACEMENT PLUG – EEES05991
50’ 12 GA CORD-O-LITE – EEES07538
• HD replacement male plug
• HD replacement female plug
• Perma-grip
• Perma-grip
• UL listed/complies with, 1996
National Electric Code/meets
OSHA requirements
• HD 12/3 SJTW (yellow) with
molded light sockets
• Accommodates bulbs up to
150 watts
POWER TOOLS
CONCRETE & MASONRY
• Plated metal lamp guards
• 15 amp molded ends
100’ 12 GA CORD-O-LITE – EEES07539
• UL listed/complies with, 1996
National Electric Code/meets
OSHA requirements
• HD 12/3 SJTW (yellow) with
molded light sockets
• Accommodates bulbs up to
150 watts
• Plated metal lamp guards
15 AMP TO 20 AMP TWIST LOCK ADAPTER –
EEES09020
100V STANDARD TWIST LOCK ADAPTER –
EEES09021
specifications
specifications
• Twist lock to extension
cords and adapter designed
for use in construction and
industrial applications
• Twist lock to extension cords
and adapter designed for use
in construction and industrial
applications
• Heavy-duty 12 GA wire
• Heavy-duty 12 GA wire
• Molded locking male and female connectors
• Molded locking male and female connectors
25’ 16 GA POLAR/SOLAR CORD TROUBLE
LIGHT – EEES5857
50 FT 16 GA POLAR/SOLAR CORD TROUBLE
LIGHT – EEES5858
• Exclusive T*Prene insulated Polar/Solar cord
• Exclusive T*Prene insulated Polar/Solar cord
• Stays flexible under all
temperature extremes to
-67 deg. F
• Stays flexible under all
temperature extremes to
-67 deg. F
• Exclusive one-piece injection molded handle
• Exclusive one-piece injection molded handle
• Grounded, vinyl coated metal guard with
switch and side outlet
• Grounded, vinyl coated metal guard with
switch and side outlet
• 74 watt maximum bulb
• 75 watt maximum bulb
• Oil and chemical resistant
• Oil and chemical resistant
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• 15 amp molded ends
216
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
ECONOMY UTILITY FUNNEL – PLWS75-064
STEEL GALVANIZED FUNNEL – PLWS75-001
• 16 oz. capacity
• 48 oz. capacity
• 1 quart capacity utility funnel
• 5-1/2” total height
• 7” total height
• 6” diameter
• 8” diameter
• 7” diameter
• 3/4” OD tip
• 1” OD tip
• 3/4” OD tip
• Durable, oil and gasoline resistant plastic
STEEL GALVANIZED FUNNEL – PLWS75-002
• 6 quart capacity offset funnel
CONCRETE & MASONRY
• Safe for all petroleum products, complete with
handy storage hanging tabs
UTILITY FUNNEL WITH SCREEN – PLWS75007
• 1 quart capacity utility funnel
with screen
• 9” diameter
• 5-3/4” funnel diameter
• 1-1/4” OD tip with screen
• 17-1/2” overall length
POWER TOOLS
MATERIAL HANDLING
ECONOMY UTILITY FUNNEL – PLWS75-062
LIGHT EQUIPMENT
FUNNELS
• Most popular all purpose
fluid dispenser
• Ideal for transmission fluid
• Galvanized steel
• 12” flexible extension with tapered tip
BITS, BLADES
& ABRASIVES
MEASURERS & FILLERS
GALVANIZED MEASURERS – PLWS75-444
PLASTIC RADIATOR FILLERS – PLWS75-029
• 2 qt. capacity
• 4 qt. capacity
• 2-1/2 gal. capacity
• 9-1/2” overall height
• 11” overall height
• Flexible spout
• Flexible spout
• Tough polyethylene
won’t damage automotive finishes
• Impervious to oil,
gasoline and
antifreeze
GREASE
MULTI PURPOSE LITHIUM GREASE-ULTRALUBE – LUCS11310
• 14 oz. cartridge
• 14 oz. cartridge
• An industrial and agricultural lithium
complex formula
• Special economy blend for general
purpose use
• It is ideal under temperature and
pressure extremes, shock loads and
high wear situations
• NLGI #1-1/2
GENERAL SUPPLIES
LMX THE “RED” GREASE – LUCS11390
LANDSCAPING
• Will withstand normal temperature extremes
HAND TOOLS
GALVANIZED MEASURERS – PLWS75-442
• Drop point 325 deg. F
• Highly water insoluble
• Rated GC-lb. by NLGI #2, drop point
510 deg. F
SAFETY SUPPLIES
• Offers superior adhesion to bearing
and moving parts
WORKWEAR
217
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
GREASE GUNS & FITTINGS
GENERAL PURPOSE GREASE GUN –
PLWS30-449
• A hard working entry level model
with professional features
GREASE GUN COUPLER – PLWS05031
GREASE GUN FITTINGS
• Coupler w/ ball check
• LUCS11100 – 1/2”-28
straight, short
• Standard jaw-type coupler features
spring loaded ball check valve
• 2-way loading: 14 oz. cartridge
or suction
• Fits all 1/8” NPT threads
• LUCS11104 – 1/2”-28
45 deg. angle
• Includes 5-3/8” pipe and coupler
• For hand operated lube
equipment only
• LUCS11112 – 1/2”-28
90 deg. angle
• Develops up to 6,000 psi
• Recommended working pressure is 3,000 psi
• LUCS11116 – 1/2”-28
straight, long
• Durable baked enamel finish
• Delivers 1.6 oz./40 strokes
• LUCS11150 – 1/8” NPT straight, short
• LUCS11218 – 1/8” NPT 45 deg. angle
• LUCS11314 – 8mm-1.0 metric 90 deg. angle
• LUCS11320 – 10mm-1.0 metric straight
• LUCS11324 – 10mm-1.0 metric 90 deg. angle
• Contain a built-in ball check to eliminate
leaking
HEAVY-DUTY PISTOL GREASE GUN –
PLWS30-425
HEAVY-DUTY WHIP HOSES – PLWS10-221
HEAVY-DUTY WHIP HOSES – PLWS10-226
• Convenient one-hand
operation
• 3-way loading: 14 oz.
cartridge, bulk or suction
• 12” in length
• Rubber with wire braids
• 18” in length
• Head cap port for adding air
bleeder or bulk loader fitting
• For use with all hand-operated grease guns
• Rubber with wire braids
• Meets SAE 100R17: 3,000 psi working pressure/12,000 lb. burst pressure
• For use with all hand-operated grease guns
• Delivers 1 oz./40 strokes
• Meets SAE 100R17: 3,000 psi working pressure/12,000 lb. burst pressure
• 5” pipe
• Heavy-duty brass end fittings with 1/8” pipe
thread on both ends
PROFESSIONAL GREASE GUN – PLWS30-475
PROFESSIONAL PISTOL GREASE GUNS –
PLWS30-416
SUCTION GREASE GUN – PLWS30-118
• Our heavy-duty grease gun for
automotive professionals
• Features variable stroke
for use in tight places
• Designed for draining and filling noncorrosive liquids
• Variable/short stroke for easy use
in confined areas
• 3-way loading: 14 oz. cartridge, bulk or suction
• Barrel holds approximately one pint
with 9” stroke
• Air bleeder and bulk loader fitting
for 3-way loading (14 oz.
cartridge, bulk or suction)
• Includes air bleeder valve and bulk loader
fitting
• Features 12” plastic hose and durable
corrosion resistant finish
• 5-3/8” pipe and coupler
• Delivers 1 oz./40 strokes
• Plated lever with comfortable oversized grip
• Includes 18” flex hose and vinyl handle grip
• Heavy-duty brass end fittings with 1/8” pipe
thread on both ends
• Develops up to 10,000 psi and delivers 1.8
oz./40 strokes
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• Precision engineered to withstand the rugged
use of most automotive, farm and industrial
applications
218
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
FITTINGS
MIX – DIXON
MATERIAL HANDLING
• We carry a large
selection of valve,
couplings and fittings
• Call 1-800-669-7788
for more details
FNPT PLUG W/FEMALE PIPE THREAD AIR
HOSE QUICK COUPLER – APES51040018
FNPT PLUG W/FEMALE PIPE THREAD AIR
HOSE QUICK COUPLER – APES51040020
MNPT PLUG W/MALE PIPE THREAD AIR HOSE
QUICK COUPLER – APES51040012
• 1/4”
• 3/8”
• 1/4”
• Steel body
• Steel body
• Steel body
• Female
• Female
• Male
POWER TOOLS
COUPLERS
MNPT MALE PIPE THREAD AIR HOSE QUICK
COUPLER
• APES51040072 – 1/4”
• APES51040066 – 1/4”
• APES51040074 – 3/8”
• APES51040068 – 3/8”
• Brass body
• Brass body
• Female
• Male
BITS, BLADES
& ABRASIVES
FNPT FEMALE PIPE THREAD AIR HOSE QUICK
COUPLER
SUCTION HOSE
• APES1-1/2X25-PVC-D –
1-1/2” x 25’
• APES1-1/2X50-CM –
1-1/2” x 50’
• APES1-1/2X20-CPLD –
1-1/2” X 20’
• APES1-1/2X50-PVC-D –
1-1/2” x 50’
• APES2X50-CM-CPLD –
2” x 50’
• APES2X20-PVC-CPLD –
2” x 20’
• APES2X100-PVC-DIS – 2” x 100’
• APES3X50-CM-CPLD –
3” x 50’
• APES3X20-PVC-CPLD – 3” x 20’
• Single jacket, 100% polyester construction will
not mildew or decay with age
• Smooth bore hose made of flexible abrasion
resistant extruded PVC with a rigid PVC helix
• Lining is ozone resistant extruded synthetic
rubber
• Coupled: male and female aluminum short
shanks with Band-It clamps
• APES2X50-PVC-DIS – 2” x 50’
• Tube/cover are PVC reinforced with 3 ply
polyester yarns
• APES6X20-PVC-CPLD – 6” x 20’
• Both tube/cover are extruded simultaneously
to obtain maximum bonding
• Rolls up for easy storage
• Resists oils, grease, many chemicals and acids
SAFETY SUPPLIES
GENERAL SUPPLIES
DISCHARGE HOSE
LANDSCAPING
DISCHARGE HOSE
HAND TOOLS
HOSES
• APES2X25-PVC-DISC – 2” x 25’
CONCRETE & MASONRY
PLUGS
WORKWEAR
219
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
ADHESIVE
TOOL CRIB CONTRACTOR’S ADHESIVE SPRAY
– SEYS620-1538
• 20 oz.
• All purpose adhesive
• Capable of bonding almost any
uneven or porous surface
SPRAY PAINTS
GREEN REBAR EPOXY-SPRAY PAINT –
SEYS16547
HI-TECH ENAMEL SPRAY PAINT
HI-TECH ENAMEL SPRAY PAINT – SEYS16115
• 16 oz. green epoxy
• SEYS16113 – 16 oz. gloss white
• 16 oz. gloss black
• Rebar touch up of cut ends to use
on reinforced concrete
• SEYS16122 – 16 oz. gloss
true red
• High quality coating for wood,
metal and most other surfaces
• Ideal for spot repair of damaged
coatings
• SEYS16126 – 16 oz. gloss green
• Interior and exterior
• SEYS16127 – 16 oz. gloss blue
• Fast dry, sag free, sandable, rust inhibitive
• SEYS16128 – 16 oz. gloss hunter green
• Fast dry, reduced overspray, sag
free, resists fading, chipping & abrasion
• SEYS16129 – 16 oz. gloss safety blue
BITS, BLADES
& ABRASIVES
• SEYS16133 – 16 oz. flat black
• High quality coating for wood, metal and most
other surfaces
HAND TOOLS
• Fast dry, sag free spray, maximum protection
HI-TECH ENAMEL SPRAY PAINT – SEYS16134
HI-TECH LACQUERS – SEYS16121
HI-TECH PRIMER SPRAY PAINT – SEYS16807
• 16 oz. flat white
• 16 oz. gloss clear acrylic
UV resistant
• 16 oz. red iron oxide
• High quality coating for wood,
metal and most other surfaces
LANDSCAPING
• Exceptional protection against
rust and corrosion
• A finished coating for metal,
wood and most other surfaces
• Excellent for preparing bare
metal or wood surfaces for a
finish coat
• Fast dry, sag free spray, maximum protection
• Fast dry, sag free, sandable, rust inhibitive
• Resists corrosion from seacoast exposure
• Does not contain chlorinated solvents, lead
free
GENERAL SUPPLIES
HI-TECH PRIMER SPRAY PAINT – SEYS16831
• 16 oz. light gray
• Excellent for preparing bare
metal or wood surfaces for a
finish coat
• Sharp, well defined lines
WORKWEAR
SAFETY SUPPLIES
• Traffic ready in 60 minutes
220
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
STRIPE TRAFFIC MARKER SPRAY PAINT –
SEYS20646
• 20 oz. traffic white
• 20 oz. traffic yellow
• Original water base formulation
for line striping
• Original water base formulation
for line striping
• Makes 2-4” wide stripes
• Makes 2-4” wide stripes
• Traffic ready in 60 minutes
• Landscaping, construction sites
• Sharp, well defined lines
• Athletic fields
INVERTED TIP
MARKING PAINTS
• SEYS20657 – 20 oz.
orange fluorescent
• SEYS20658 – 20 oz.
red/orange fluorescent
• 20 oz. hot pink fluorescent
• Fast drying marking paint,
inverted tip
• Utility marking, golf courses
• Formulated to adhere quickly
and bond to a variety of substrates
• SEYS20669 – 20 oz. blue fluorescent
• Fast drying marking paint, inverted tip
BITS, BLADES
& ABRASIVES
• SEYS20668 – 20 oz.
green fluorescent
STRIPE INVERTED TIP MARKER SPRAY PAINT
– SEYS20679
POWER TOOLS
STRIPE INVERTED TIP MARKER SPRAY PAINT
CONCRETE & MASONRY
• Surveyor’s marking, excavation sites
MATERIAL HANDLING
STRIPE TRAFFIC MARKER SPRAY PAINT –
SEYS20642
LIGHT EQUIPMENT
TRAFFIC PAINTS
• Utility marking, golf courses
• Landscaping, construction sites
HAND TOOLS
• Athletic fields
• Surveyor’s marking, excavation sites
PAINT APPLICATORS
• Applicator trigger actuates
spray can nozzle
• Paint applicator on a wheel saves
bending over to spray
• Made of tough injection
molded ABS plastic
• Made of tough injection molded
ABS plastic with chrome plated
metal handle
• For use with inverted tip
spray can only
• For use with inverted tip spray
can only
MARKING MACHINE
• Designed exclusively for
stripe traffic paint
• Applies crisp, even 2-4” line
to concrete or asphalt
SAFETY SUPPLIES
TRAFFIC MARKING MACHINE – SEYSZ604
GENERAL SUPPLIES
ROLLA MARKER PAINT APPLICATOR –
KESSPA35
LANDSCAPING
HANDI MARKER PAINT APPLICATOR –
KESSPA-14
WORKWEAR
221
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
MARKING WAND
MARKING WAND – SEYSZ608
• Designed for use with inverted tip
marking paint
• Lightweight, ideal for a wide range
of marking applications
MARKING WAND
MARKING WAND WITH STAND –
ROLS00-PMW
• 32” approximate length
• Utility installation, street opening
surveys, striping, fencing, track
and field events, law enforcement,
parking lots, asphalt sealing
• Sturdy lightweight construction
• Wand with stand
BITS, BLADES
& ABRASIVES
• Trigger actuator for comfort
• Removable wheel for ease in stenciling and
writing from a standing position
• Completely assembled for immediate use
LANDSCAPING
HAND TOOLS
MARKING TOOLS
BALL PAINT MARKER – MRKS84620
BALL PAINT MARKER – MRKS84621
• White metal ball bottle marker
• Yellow metal ball bottle marker
• Marks with real paint, dries in
5 minutes
• Marks with real paint, dries in
5 minutes
• Durable metal ball tip marks
on smooth or rough surfaces
• Durable metal ball tip marks
on smooth or rough surfaces
• Lead-free, non toxic
• Made of durable hardwood
• Marks are weather and fade resistant
• Protects crayon from breakage
• Unbreakable plastic bottle with 1/8” steel
ball tip
• Comes with leather wrist thong
CARPENTERS PENCIL – MRKS96927
• Hard lead
• Premium quality
• Flat lead design for easier marking
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Plastic cap keeps tip clean between jobs
222
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
COLD-PAINTSTIK MARKER-B
• White Paintstik marker
• Yellow Paintstik marker
• MRKS80220 – white Paintstik marker
• Real paint in stick form
• MRKS80221 – yellow Paintstik marker
• Mark withstands annealing and heat treating
operations
• Mark withstands annealing and heat
treating operations
• MRKS80222 – red Paintstik marker
• For welds, ingots, castings, forgings, and
annealed parts
• Lead-free, non-toxic
• MRKS80225 – blue Paintstik marker
• Marks are weather and fade resistant
• Will not come off in oil or water baths
• Unbreakable plastic bottle with 1/8” steel
ball tip
• Weather resistant, UV resistant
• Mark at room temperature M withstands 1600
deg. F
• Plastic cap keeps tip clean between jobs
• MRKS80224 – orange Paintstik marker
• Ideal for layout, color coding, fabrication and
identification
• Marks through oil and water
CONCRETE & MASONRY
COLD-PAINTSTIK MARKER – MRKS81921
MATERIAL HANDLING
COLD-PAINTSTIK MARKER – MRKS81920
LIGHT EQUIPMENT
MARKING TOOLS
• Marks on smooth, rough or dirty surfaces
• Lead free, non-toxic
LUMBER CRAYON – MRKS80462
• Green Paintstik marker
• MRKS80350 - white lumber crayon
• Pink fluorescent lumber crayon
• MRKS80351 - yellow lumber crayon
• Also known as layout chalk or “keel”
• Weather resistant, UV resistant
• MRKS80352 - red lumber crayon
• Makes weather resistant, water resistant
marks
• MRKS80353 - black lumber crayon
• Clay based formula provides longer marking
mileage
• Lead-free
• MRKS80356 - green lumber crayon
• Marks on concrete, wood, metal, plastic,
rubber, paper, cardboard and ceramics
• MRKS80451 - yellow fluorescent
lumber crayon
• Standard 1/2” hex shape
• MRKS80452 - red fluorescent lumber crayon
• MRKS80355 - blue lumber crayon
• For welds, ingots, castings, forgings, and
annealed parts
• Will not come off in oil or water baths
• Mark at room temperature M withstands 1600
deg. F
HAND TOOLS
LUMBER CRAYON
BITS, BLADES
& ABRASIVES
COLD-PAINTSTIK MARKER-B – MRKS80226
POWER TOOLS
• For use on metal, wood, plastic, concrete,
rubber, glass, cardboard and paper
• Also known as layout chalk or “keel”
LANDSCAPING
• Clay based formula provides longer
marking mileage
• Makes weather resistant, water
resistant marks
• Lead-free
• Standard 1/2” hex shape
PERMANENT MARKER-JUMBO – MRKS96913
• Black Dura Ink #15 fine tip marker
• Blue Dura Ink #15 fine tip marker
• Black Dura Ink #100 jumbo marker
• Ideal for fine line marking
• Ideal for fine line marking
• 5/8” chisel tip for broad marks
• Extra tough tip, won’t spread or mush
• Extra tough tip, won’t spread or mush
• Jumbo ink supply for greater mileage
• Smear resistant, water resistant, fast drying
• Heavy-duty metal barrel
• Marks on metal, wood, cardboard, paper, plastic, glass, etc
• Use on cardboard, wood, metal, paper, ceramics, glass and leather
• Makes clean, accurate marks on wood and
other surfaces
• For identification of parts, layout work and
marking cartons and crates
• For identification of equipment, marking shipping cartons and sign making
WORKWEAR
PERMANENT MARKER-FINE TIP – MRKS96025
SAFETY SUPPLIES
PERMANENT MARKER-FINE TIP – MRKS96023
GENERAL SUPPLIES
• Marks on concrete, wood, metal, plastic,
rubber, paper, cardboard and ceramics
223
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
MARKING TOOLS
PERMANENT MARKER-KING SIZE –
MRKS96222
MRKS96223
MRKS96225
• Red Dura Ink #25 king size marker
• Black Dura Ink #25 king size marker
• Blue Dura Ink #25 king size marker
• Chisel tip makes fine lines or broad marks
• Extra large ink supply for greater mileage
• Marks on all surfaces including: metal, wood,
glass, plastic, rubber, cardboard and paper
POWER TOOLS
• The fiber nib is replaceable to assure complete
use of each marker
• Durable metal barrel
PETERSON HOLDER – MRKS85490
BITS, BLADES
& ABRASIVES
• Lead free, low halogens
SOAPSTONE HOLDER-FLAT – MRKS80140
SOAPSTONE HOLDER-ROUND – MRKS80141
• For Scan-it Plus 1/2”
HEX crayons
• All metal construction for long work life
• All metal construction for long work life
• Prevents breakage
• Prevents breakage
• For all 1/2” hexagonal markers
• Allows full use of each soapstone marker
• Allows full use of each soapstone marker
• Smear resistant, water resistant, fast drying
• Handy pocket clip
• Ideal for layout, color coding, fabrication and
identification
• #109 lumber
crayon holder
• Marks on metal, wood, cardboard, paper, plastic, glass, etc
• Marks through oil and water
• For identification of parts, layout work and
marking cartons and crates
• Marks on smooth, rough or dirty surfaces
• For use on metal, wood, plastic, concrete, rubber, glass, cardboard and paper
LANDSCAPING
HAND TOOLS
• Lead free, non toxic
SOAPSTONE-FLAT – MRKS80129
SOAPSTONE-ROUND – MRKS80130
VALVE ACTION PAINT MARKER
• For the temporary marking of metal surfaces
during welding fabrication
• For the temporary marking of metal surfaces
during welding fabrication
• MRKS96820 – white valve action paint marker
• Made of all natural soapstone for superior
marking
• Made of all natural soapstone for superior
marking
• MRKS96822 – red valve action paint marker
• Marks will not contaminate welds and are
easily removed
• Marks will not contaminate welds and are
easily removed
• Marks with real paint, dries in 3 minutes
• Nib releases paint as needed for continuous
marking
• Marks on all surfaces including: metal, wood,
glass, plastic, rubber, cardboard and paper
• Lead free, low halogens
• The fiber nib is replaceable to assure complete
use of each marker
• Durable metal barrel
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Handy pocket clip
• MRKS96821 – yellow valve action paint marker
224
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
LIGHT EQUIPMENT
MARKING TOOLS
VALVE ACTION PAINT MARKER – MRKS96823
MATERIAL HANDLING
• Black valve action paint marker
• Marks with real paint, dries in 3 minutes
• Nib releases paint as needed for continuous
marking
• Tough cap and barrel for heavy-duty use
CONCRETE & MASONRY
PLASTIC
• 20’ x 100’
• Clear plastic sheeting
4 MIL CLEAR POLY FILM
• GEFS6X100-4MIL-BLK –
6’ x 100’
• GEFS4X100-4MIL-CLR –
4’ x 100’
• GEFS10X100-4MIL-BLK –
10’ x 100’
• GEFS6X100-4MIL-CLR –
6’ x 100’
• GEFS12X100-4MIL-BLK – 12’ x 100’
• GEFS8X100-4MIL-CLR – 8’ x 100’
• GEFS16X100-4MIL-BLK – 16’ x 100’
• GEFS10X100-4MIL-CLR – 10’ x 100’
• GEFS20X100-4MIL-BLK – 20’ x 100’
• GEFS12X100-4MIL-CLR – 12’ x 100’
• GEFS32X100-4MIL-BLK – 32’ x 100’
• GEFS16X100-4MIL-CLR – 16’ x 100’
• Image shown as clear plastic sheeting
• GEFS20X100-4MIL-CLR – 20’ x 100’
BITS, BLADES
& ABRASIVES
4 MIL BLACK POLY FILM
POWER TOOLS
3 MIL CLEAR POLY FILM –
GEFS20X100-3MIL-CLR
• GEFS24X100-4MIL-CLR – 24’ x 100’
• GEFS32X100-4MIL-CLR – 32’ x 100’
• GEFS40X100-4MIL-CLR – 40’ x 100’
HAND TOOLS
• GEFS28X100-4MIL-CLR – 28’ x 100’
6 MIL CLEAR POLY FILM –
GEFS20X100-6M-CLR
• 12’ x 100’
• 20’ x 100’
• Image shown as clear
plastic sheeting
REINFORCED POLY FILM
• GEFS20X100-REINF –
20’ x 100’
LANDSCAPING
6 MIL BLACK POLY FILM –
GEFS12X100-6MIL-BK
• GEFS24X100-REINF –
24’ x 100’
• GEFS40X100-REINF – 40’ x 100’
• Reinforced plastic sheeting
RADIOS
2 WAY RADIO – MOTSXU2100
• Range up to 5 miles outdoors,
150,000 sq ft or 8 floors indoors
• 1 watt technology
• Operates on 56 UHF business
exclusive frequencies
• Single channel operation with 121
interference eliminator codes
• Multi channel operation with 121
interference eliminator codes
WORKWEAR
2 WAY RADIO – MOTSXU1100
SAFETY SUPPLIES
2 WAY RADIO – MOTSCLS1110
GENERAL SUPPLIES
• GEFS32X100-REINF – 32’ x 100’
225
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
ROCK DRILL OIL
UNIMARK
GARD EP ROCK DRILL OIL –
• GACS930-5-GAL –
winter blend
• GACS960-5-GAL –
summer blend
• Used in industrial
pneumatic tools
requiring extreme
pressure lubricants
• Protect metal surfaces against shock loading
and boundary friction
• Outstanding oxidation resistance
• Protects against rust and corrosion
• Protection against foaming and smoke
generation
POWER TOOLS
• Environmentally friendly ashless formulation
• Reduced frictional heat in pneumatic tools
• Prevents corrosion of non-ferrous metal parts
MANILA ROPE
MASON’S NYLON TWINE
NYLON TWISTED ROPE
• CORSMAN12100S – 3/8” x 100’, pkg-spool
• CORSBOT181000Y – #18 x 800’, neon yellow
• CORSNTR12100S –
3/8” x 100’, pkg-spool
• CORSMAN12600C – 3/8” x 600’, pkg-coil
• CORSMAN16100R – 1/2” x 100’, pkg-reel
• CORSBOT18500O – #18 x 500’, neon orange
• CORSBOT18500P – #18 x 400’, neon pink
• CORSNTR12600R –
3/8” x 600’, pkg-reel
• CORSNTR16100S –
1/2” x 100’, pkg-spool
• CORSNTR1650S – 1/2” X 50’, pkg-spool
• CORSNTR20600R – 5/8” x 600’, pkg-reel
• CORSMAN32600C – 1” x 600’, pkg-coil
• Professional-duty
• Light-duty
• The strongest rope fiber available for
general use
• General purpose use
• Resists rot, mildew, and most chemicals
• Natural texture makes for a
firm grip
• Knots well
• Smooth and easy to handle
• Holds knots well
• Resist heat and sunlight
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
ROPES
226
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
POLYPROPYLENE TWISTED ROPE
• CORSNTR1250PB-MP – 3/8” x 50’
• CORSPTR12100PB – 3/8” x 100’
• CORSNTR8100PB-MP – 1/4” x 100’
• CORSPTR1250PR – 3/8” x 50’
• CORSPTR12600R –
3/8” x 600’, pkg-reel
• CORSNTR850PB-MP – 1/4” x 50’
• CORSPTR8100PB – 1/4” x 100’
• Professional-duty
• CORSPTR850PB – 1/4” x 50’
• Pkg-plastic bag
• Medium-duty
• CORSPTR1650S –
1/2” X 50’, pkg-spool
• The strongest rope fiber available
for general use
• Pkg-plastic bag
• CORSPTR16600R – 1/2” x 600’, pkg-reel
• Great for tie-downs, lashing and load binding
• Resists rot, mildew, and most chemicals
• Strong but lightweight, minimum stretch
• CORSPTR24600R – 3/4” X 600’, pkg-reel
• Knots well
• CORSPTR16100S –
1/2” X 100’, pkg-spool
• Smooth and easy to handle
• Medium-duty
• Great for tie-downs, lashing and load binding
CONCRETE & MASONRY
POLYPROPYLENE TWISTED ROPE
MATERIAL HANDLING
NYLON TWISTED ROPE
LIGHT EQUIPMENT
ROPES
• Strong but lightweight, minimum stretch
POWER TOOLS
SPRAYERS
3 GALLON INDUSTRIAL SPRAYER – CAPS2279
• Tri-poxy coated metal unit
• Polyethylene unit
• 12” curved brass extension
for easier reach
• Brass plated shut-off has lock-on
feature for continuous spraying
• NEW-4-1/2” wide opening for
easy filling and cleaning
• 42” nylon reinforced hose to
resist chemicals
• Tri-Poxy units have triple coat
protection against corrosion,
cracking and pitting
• NEW-actual capacity tank
• 42” heavy-duty nylon reinforced
hose to resist chemicals
• 36” heavy-duty nylon reinforced hose to resist
chemicals
• 18” curved brass extension for easier reach
• 18” curved brass extension for easier reach
• Brass/metal pump with three point closure for
added strength
• Brass fan tip nozzle
• Brass adjustable nozzle for
fine mist to stream
• Funnel top for easy filling
• NEW – brass plated zinc shut-off with lock-on
for continuous spraying
• Tri-poxy has triple coat protection against corroding, cracking and pitting
• Brass adjustable nozzle for fine mist to stream
• Built-in relief valve and pressure gauge
• VITON equipped for maximum chemical
resistance
3 GALLON PREMIER SPRAYER – CAPS1380
3.5 GALLON CONCRETE SPRAYER –
CAPS1949
HAND SPRAYER – CAPS6002
• Funnel top tank for easy filling
• Metal shut-off with “Lock-on”
• Wide base metal tank helps
prevent tipping over
• 48” heavy-duty nylon reinforced
hose to resist chemicals
• 24” curved brass extension for
easier reach
• Brass pump develops 150 psi pressure, able
to shoot a straight stream up to 30’
• 84” heavy-duty nylon reinforced hose to resist
chemicals
• Metal tanks rinse cleaner for multi-use
• Brass/metal pump with three point closure
• Brass adjustable nozzle for fine mist to stream
• Convenient carrying strap
• Threaded fittings for easy changing of hose,
shut-off and nozzle
• No hose assembly required on metal tanks
• Easy pump action for quick pressurizing
SAFETY SUPPLIES
• Brass fan tip nozzle
GENERAL SUPPLIES
• Adjustable brass cone nozzle
sprays fine mist to coarse stream
• Offers maximum portability and can be used
in any container by
dropping the weighted
strainer in solution and pumping
LANDSCAPING
• Carrying strap with pad
• VITON-equipped for maximum chemical
resistance
HAND TOOLS
3 GALLON GENERAL DUTY SPRAYER –
CAPS1831
BITS, BLADES
& ABRASIVES
1 GALLON PREMIER SPRAYER – CAPS1180
WORKWEAR
227
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
TAPE
COLORED VINYL ELECTRICAL MARKING
TAPE, PVC
GENERAL PURPOSE VINYL ELECTRICAL TAPE
– TAPSUT-602
“FIX-IT” DUCT TAPE – TAPSUT-6900
• .75” x 60’
• 1.87” x 60 yds
• For all automotive
wiring applications
• Utility grade with
good conformability
• Poly coated cloth
backing with a very
aggressive adhesive
• TAPSUT-4113 – .75” x 60’ green
CONCRETE & MASONRY
• TAPSUT-4114 – .75” x 60’ white
• Water resistant
• TAPSUT-4116 – .75” x 60’ yellow
• TAPSUT-4117 – .75” x 60’ blue
• TAPSUT-4118 – .75” x 60’ red
• 7 mil
• Has excellent adhesion
POWER TOOLS
• UL listed
CONTRACTOR GRADE DUCT TAPE
XHD DUCT TAPE – TAPSUT-9600
HEAVY-DUTY BLUE MASKING TAPE
• TAPSUT-102-1-1/2 –
1-1/2” x 60 yd
• 1.87” x 60 yds
• TAPSUT-9915 –
1.40” x 60 yds
• Poly coated cloth
backing with a very
aggressive adhesive
BITS, BLADES
& ABRASIVES
• TAPSUT-1022-3 –
3” x 60 yd
• Most popular and
versatile duct tape
• Water resistant
• Polyethylene coated cloth, suitable for contractors and do-it-yourself applications
• Made with DuPont dacron polyester for added
strength and durability
• Meets UL723, HUD & BOCA codes
• TAPSUT-9920 –
1.87” x 60 yds
• Superior quality
blue painter tape
• Formulated for use on windows, trim and
walls; can withstand direct UV exposure
on glass without leaving residue for up to
14 days
HAND TOOLS
• Fine structured crepe for superior cornering,
conformability and tight painting lines
• Highly versatile; removes easily, yet strong
enough to hang visquine and masking papers
for spray applications
• TAPS11-1/2X260 –
1/2” x 260”
• TAPSUT11-3/4X260 –
3/4” x 260”
• Teflon thread
sealing tape
• Chemically inert, withstands alkalies, acids,
oils and solvents
• Can be used on iron, stainless steel, copper,
brass, plastic, glass or rubber pipes
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
TEFLON TAPE
228
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
FLAME RESISTANT CANVAS TARP
• LITS10X16-12OZ –
10’ x 16’, olive drab
• LITS12X16-12OZ –
• LITS15X20-12OZ – 15’ x 20’, olive drab
• Commonly used for welding curtains, flea
market dividers, equipment covers, etc.
• 12 oz. fire retardant canvas tarp
• Flash point - open cut >500 deg.
• Mildew and rot resistant
• Rust resistant grommets spaced on
approximately 3’ centers
POLYTUF HEAVY-DUTY POLY TARPS
BITS, BLADES
& ABRASIVES
TARPS
POWER TOOLS
• Meets California fire marshall rating and
CPAI-84, Section 6
CONCRETE & MASONRY
MATERIAL HANDLING
• LITS10X12-12OZ –
LIGHT EQUIPMENT
TARPS
• SCHSA10X18 – 10’ x 18’
• SCHSA16X20 – 16’ x 20’
• SCHSA20X30 – 20’ x 30’
• SCHSA20X40 – 20’ x 40’
HAND TOOLS
• SCHSA20X20 – 20’ x 20’
• SCHSA6X8 – 6’ x 8’
• SCHSA9X12 – 9’ x 12’
• Heavy-duty forest shade, UV resistant
• Tear resistant
• Lightweight with excellent ergonomics
LANDSCAPING
• Weather resistant
• Cold resistant to -20 deg. F
• Rugged-poly roping inside hem for
added strength
GENERAL SUPPLIES
• Easily secured – grommets in each corner and
about every 3’ all around the hem
SAFETY SUPPLIES
WORKWEAR
229
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
TIE WIRE
TIE WIRE
TIE WIRE – MARS16GA/GOLD
TIE WIRE TWISTER – MARSPGT
• MARS12-100lb. –
12 gauge, 100 lb. coil
• 16 gauge
• Wooden handle twister
• 100 lb. coil
• Specified to fit Mar-Mac wire
• MARS16GA-70lb. –
16 gauge, 70 lb. coil
• Bonded plastic coated wire
• Primarily used for tying and
bundling epoxy coated rebar
• MARS3-1/2lb.-ROLLS –
16 gauge, 3-1/2 lb. rolls
• MARS9-100lb. – 9 gauge, 100 lb. coil
• Black annealed coil wire for tying rebar
• The purpose of the plastic coating is twofold:
1. to protect the epoxy coating on the rebar
2. to protect the wire from corrosion
• Used for tying or reinforcing steel
• Soft and flexible, comes in one continuous
piece of wire per coil
• No tangles, no cross-overs, and no tight spots
TIE WIRE WHEEL
TIE-WIRE REEL – KTLS27400
• Rugged, lightweight reel is
smooth aluminum alloy with
wear parts made of steel
• Feeds pre-coiled wire smoothly, easily, and quickly to save time and reduce
wasted wire
• Designed for left or right hand use
LANDSCAPING
HAND TOOLS
• Large, comfortable rewind knob
• Easily removed cover plate that permits
quick, convenient reloading to handle all types
of wire
TIRE GAUGES
TIRE PRESSURE GAUGE – TRUS17-519
TIRE PRESSURE GAUGE – TRUS17-525
• Pencil type
• Pocket, dual foot type
• Die cast chuck
• Brass barrel
• Nylon dial bar
• Die cast chuck
• 20-120 lbs.
• Nylon dial bar
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• 20-120 lbs.
230
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
• 16’, 1000 lb. capacity
• 5’, 1000 lb. capacity
• 5/32” galvanized aircraft cable
• 5/32” galvanized aircraft cable
• Standard two-way
ratchet winch
• Standard two-way
ratchet winch
• Adjustable wall stop
• Adjustable wall stop
• Lifting is accomplished by the ratchet winch
• Lifting is accomplished by the ratchet winch
• Double headed nails secure the hinged floor
plate to the subfloor
• Double headed nails secure the hinged floor
plate to the subfloor
• Telescopes to the closed position for storage
and hauling
• Telescopes to the closed position for storage
and hauling
THREADED RODS
• CHWS35131-7 – 3/8”-16 x 36”
• CHWS35134-8 – 3/8”-16 x 72”
POWER TOOLS
ZINC PLATED STEEL CONTINUOUS
THREADED ROD
CONCRETE & MASONRY
23’ WALL JACK – PROE23-FT
MATERIAL HANDLING
16’ WALL JACK – PROE16-FT
LIGHT EQUIPMENT
WALL JACKS
• CHWS35171-3 – 1/2”-13 x 36”
• CHWS35174-4 – 1/2”-13 x 72”
• CHWS35231-4 – 3/4”-10 x 36”
BITS, BLADES
& ABRASIVES
• CHWS35191-1 – 9/16”-12 x 36”
• CHWS35214-7 – 5/8”-11 x 72”
• CHWS35234-5 – 3/4”-10 x 72”
• CHWS35314-4 – 1-1/4”-7 x 72”
• NC and NF rolled threads
COUPLING NUTS
HAND TOOLS
• Manufactured from low carbon domestic steel
ZINC PLATED STEEL COUPLING NUTS
• CHWS25515-8 – 5/16”-18, 1/2”
outside hex
• CHWS25530-1 – 1/2”-13, 11/16” outside hex
• CHWS25535-6 – 5/8”-11, 13/16” outside hex
• CHWS25540-0 – 3/4”-10, 1” outside hex
• CHWS25550-9 – 1”-8, 1-3/8” outside hex
GENERAL SUPPLIES
• CHWS25520-2 – 3/8”-16, 5/8”
outside hex
LANDSCAPING
• CHWS25510-3 – 1/4”-20, 3/8”
outside hex
• CHWS25560-8 – 1-1/4”-7, 1-5/8” outside hex
• For joining threaded rods where span of
application exceeds 144” or where a
threaded fitting is used with threaded rod in
suspension applications
SAFETY SUPPLIES
• National coarse right hand thread
WORKWEAR
231
LIGHT EQUIPMENT
GENERAL SUPPLIES
BRACES
RIGID HANDLE BRACE – FLOS365160TC00
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
• Rigid brace
• Metal brace fastens
to brush block and
center clamps around handle to provide additional stability and durability
• All mounting hardware included
BROOMS
BLENDED HORSEHAIR BROOM –
FLOS45031TC03
BLENDED HORSEHAIR BROOM –
FLOS45041TC03
BLENDED HORSEHAIR WITH TAMPICO
CENTER
• 40-24
• 50-24
• Horsehair and synthetic
bristle blended to
sweep fine particles on hard, smooth surfaces
• A slightly aggressive
natural tampico center moves debris and
border controls dust and fine particles in general purpose and light industrial applications
• FLOS45043TC03 –
50-36
• Hardwood block is 7/8” thick, 2-1/2” wide, 24”
long and has 2 pre-drilled holes for rigid brace
• Hardwood block is 7/8” thick, 2-1/2” wide,
24” long, 3” trim
• 3” trim
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Threaded handles and rigid braces
sold separately
• Threaded handles sold separately
LANDSCAPING
GENERAL SUPPLIES
• A slightly aggressive natural tampico center
moves debris and border controls dust and
fine particles in general purpose and light
industrial applications
CORN WHISK BROOM – FLOS36633TC00
FLAGGED POLYPROPYLENE, ORANGE –
FLOS45014TC23
MAROON POLYPROPYLENE BROOM –
FLOS36761824
• 633
• 48-24
• 72-18
• A necessity for shops,
manufacturing facilities
and anywhere those little messes occur
• Lightly crimped filament
is flagged for sweeping
dust and fine particles on smooth surfaces
• Stiff bristles hold up
on sidewalks, parking
lots and other rough surfaces
24” long and has 2 pre-drilled holes for
rigid brace
• This long wearing broom is not affected by
water or petroleum products
• Has a cap with hanging loop
• 3” trim
• Threaded handles and rigid braces sold
separately
18” long, 3-1/4” trim
MAROON POLYPROPYLENE BROOM –
FLOS45202TC01
ORANGE POLYPROPYLENE BROOM WITH
SCRAPER – FLOS367396TC24
PALMYRA FIBER BROOM – FLOS45222TC00
• 72-24
• 95-24
• 70-24
• Stiff bristles hold up on
sidewalks, parking lots
and other rough surfaces
• Heavy-duty orange bristle with
shaped steel blade for scraping
• A popular natural fiber
brush for sweeping
heavy debris
• This long wearing broom is not affected by
water or petroleum products
• Comes fully assembled with bolt
on handle connection, Juno handle and rigid brace
• Includes guardian brace
• 3-1/4” trim
24” long and has 2 pre-drilled holes for rigid
brace, 3-1/4” trim
• Hardwood block is 24” long
• Includes guardian brace
24” long and has 2 pre-drilled holes for rigid
brace, 4” trim
separately
separately
WORKWEAR
SAFETY SUPPLIES
• FLOS45053TC03 –
50-18
232
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
• 516
• 1118
• 1124
• Natural palmyra fiber
is perfect for wet and
dry applications, farm
and street use
• Durable, tough and
long wearing crimped
safety orange bristle
• Durable, tough and
long wearing crimped
safety orange bristle
• An economically durable broom
• Perfect for street crews, construction and
other demanding work sites
• Perfect for street crews, construction and
other demanding work sites
• Hardwood block is 1-1/4” thick, 3-1/2” wide,
16” long, 6-1/4” trim
• Block is 1-1/4” thick, 3-1/2” wide, 18” long,
5-1/8” trim
• Block is 1-1/4” thick, 3-1/2” wide, 24” long,
5-1/8” trim
• Tapered handles sold separately
WAREHOUSE CORN BROOM – FLOS3685500
WAREHOUSE CORN BROOM – FLOS4135467
• 855
• 850
• For heavy-duty industrial use in
factories or warehouses
• For heavy-duty industrial use in
factories or warehouses
• Four sewn with 1 wire band, stiff
fiber reinforced center and natural
finished handle
• Four sewn with 1 wire band, stiff
fiber reinforced center and natural
finished handle
POWER TOOLS
STREET BROOM; ORANGE POLYPROPYLENE –
FLOS36112424
CONCRETE & MASONRY
STREET BROOM; ORANGE POLYPROPYLENE –
FLOS36111824
MATERIAL HANDLING
STREET BROOM, PALMYRA STALK –
FLOS36505TC00
LIGHT EQUIPMENT
BROOMS
• Also has rattan for longer life,
added durability and stiffness
ACID WASH BRUSH – FLOS36505TC00
BLACK POLYPROPYLENE – FLOS45073TC03
BLUE POLYPROPYLENE MASONRY BRUSH –
FLOS367158TC
• 18
• White polypropylene
plastic for use with
diluted acid on cement
trucks or wherever phosphoric acid dilution
cleaners are used
• 208P-24
• Resists oil and water and can
be washed to extend broom
life
• This bristle will not absorb moisture and is
resistant to most chemicals, acids and oils
• Hardwood block is 7/8” thick,
2-1/2” wide, 18” long, 3” trim
• A durable synthetic broom that can be washed
to extend broom life
LANDSCAPING
• Handles sold separately
HAND TOOLS
• 1230
• Has one tapered and one threaded handle hole
BITS, BLADES
& ABRASIVES
BRUSHES
LONG HANDLE UTILITY BRUSH –
FLOS36509LTC00
LONG HANDLE UTILITY BRUSH –
FLOS36513LTC00
• 37
• 509L
• 513L
• Flagged filament is
ideal for fine particles,
dust and sawdust on
smooth surfaces
• Natural white tampico
fiber bristle, sturdy
foam block
• Natural stiff palmyra
fiber bristle, sturdy
foam block
• Long handle style (20” long)
• Long handle style (20” long)
• 13” block with 8” long brush face
• Brush face 5-1/2” x 5”, 2” trim
• Brush face 5-1/2” x 5”, 2” trim
• 2-1/2” trim
SAFETY SUPPLIES
• Made of sturdy foam plastic with bi-directional
hanging hole and quality flagged copper
plastic fill
GENERAL SUPPLIES
COUNTER BRUSH-FLAGGED COPPER PLASTIC
– FLOS36258TC03
WORKWEAR
233
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
BRUSHES
PARTS CLEANING BRUSH-POLYPROPYLENE
FILL – FLOS3657303
WIRE BRUSH-CURVED HANDLE –
FLOS36155500
• 573
• 1555
• Parts brush designed
to hold solutions and
work them into intricate
areas while removing oil, dirt and paint
• Tempered round wire
for removing rust, metal
burrs, paint and varnish
• Brush is approximately 10” overall length
• 1-1/8” trim
• Polypropylene filament, 1” diameter metal
ferrule
• Fill rows, 4 x 18
• 2-3/4” trim
• Wood block is 13-3/4” long
• 1-1/8” block width
• 1-1/2” scraper attached
WIRE BRUSH-SHOE HANDLE STYLE-STEEL
WIRE – FLOS45776TC00
WIRE BRUSH-TOOTHBRUSH STYLE, PLASTIC
HANDLE, STAINLESS STEEL – FLOS4067500
• 1541
• 15S
• For a more comfortable
grip, try the shoe handle style block
• Great for small jobs, tight
areas and detail work on
parts, seams, threads
and soldered joints
• 4 x 16 rows of fill on a 10” long wood block
• Tempered steel trim 1-1/4”
WIRE BRUSH-CURVED HANDLE –
• FLOS36SS1551 – 1551S,
1-1/8” trim
• FLOS45770TC00 – 1551,
1/8” trim
• Tempered round wire for
removing rust, metal burrs,
paint and varnish
• Wood block is 13-3/4” long
• Fill rows, 3 x 19, 1” block width
• 7-1/4” long plastic handle
BITS, BLADES
& ABRASIVES
• Stainless steel, trim 1/2”
BRUSHES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
TIN HANDLE ACID BRUSH – MMBS21507
• 3/8” x 6”
• Flat face, stiff black horsehair
• High quality
DUSTER
POLY WOOL DUSTER – FLOS363155
• 3155
• This popular poly wood
duster attracts dust
using a unique electrostatic charge that
attracts even the finest particles
• This duster is gentle on delicate surfaces and
each head can be bent to clean those hard to
reach areas
WORKWEAR
SAFETY SUPPLIES
• 23” long
234
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
QUICK CHANGE MOP HANDLE-METAL HEAD –
FLOS40340
TAPERED HANDLE – FLOS40262TC00
• Juno-HD
• 83W
• 2003-5
• Bolt on Juno handle
issued with Juno style blocks only
• Metal head features standard
wing nut construction with a
quick release cross bar for quick
changes and a secure hold
• 5’ wooden
hardwood handle
• 63” long, 1-1/8” diameter
wood handle
• 1-1/8” diameter
• Metal end increases durability and handle life
• 1-1/8” diameter, 5’ long
THREADED HANDLE-METAL TIP –
FLOS45267TC00
• 2001NP
• 2009-5
• 318T
• 5’ wooden standard
threaded handle
• Wood threaded
handle-metal tip
• Aluminum tubing telescopic pole can be used
for window brushes in high areas
• Made of lacquered hardwood for consistent
dependability
• 5’ long 7/8” diameter
• Changes quickly to desired length and has a
standard threaded end
• 1-1/8” diameter
POWER TOOLS
THREADED HANDLE – FLOS40271TC00
• Adjusts from 79” to 18’
PAN
CONCRETE & MASONRY
TELESCOPIC POLE-ALUMINUM –
FLOS4101400
• Clear lacquer finish
and precision cut tapered end
MATERIAL HANDLING
JUNO STYLE HANDLE – FLOS3620405TC00
LIGHT EQUIPMENT
HANDLES
BITS, BLADES
& ABRASIVES
METAL DUST PAN – FLOS3623603
• 236
• Classic dust pan design
made of heavy gauge steel
with black enamel finish
HAND TOOLS
• The one piece design enhances the dust
pan’s durability
• 12” W x 7-1/2” D
SQUEEGEES
FLOOR SQUEEGEE-BLACK RUBBER, METAL
FRAME – FLOS3612024TC00
• FLOS36633000 – 6330,
approximately 30”
• FLOS36324CTC00 – 324C, 24” long
• 2024
• FLOS36330C00 – 330C, 30” long
• FLOS36672400 – 6724,
approximately 22”
• Control liquid better
with this heavy-duty
metal frame squeegee
• 24” black rubber blade,
mounted on a heavyduty metal frame
• For uneven, grouted and smooth
surface floors
• Handles daily liquid clean up
• Soft, double foam rubber blade design
• Single blade design in black rubber for most
water applications
• Use for spills, floor cleaning or in carwash bay
maintenance
• Metal frame for heavy-duty use areas
• Tapered handle sold separately
GENERAL SUPPLIES
FLOOR SQUEEGEE-BLACK RUBBER, CURVED
METAL FRAME
LANDSCAPING
FLOOR SQUEEGEE-BLACK MOSS FOAM RUBBER, METAL FRAME
• Reinforced handle holder
SAFETY SUPPLIES
• Accepts 15/16” tapered handle
(sold separately)
WORKWEAR
235
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
SQUEEGEES
FLOOR SQUEEGEE-BLACK RUBBER, METAL
FRAME – FLOS3612036TC00
• 2036
• 36” black rubber blade,
mounted on a heavyduty metal frame
• Handles daily liquid clean up
• Use for spills, floor cleaning or in carwash bay
maintenance
HASP
POWER TOOLS
HASP – MLKS704D
• 4-1/2” hard wrought
steel body
• Hardened steel staples
resist cutting and sawing
• Hardened steel locking eyes for strong
cut resistance
BITS, BLADES
& ABRASIVES
• Steel shackle provides strong cut resistance
• 4-pin cylinder helps prevent picking
• Hundreds of key changes maximize
key integrity
LANDSCAPING
HAND TOOLS
• Proprietary rustproofing for longer life
LOCKING CABLES
ADJUSTABLE LOCKING CABLE – MLKS8401D
ADJUSTABLE LOCKING CABLE – MLKS8412D
ADJUSTABLE LOCKING CABLE –
MLKS8413XDPF
• Keyed different, yellow lock
• 12’ x 3/8” cable,
keyed different
• 6’ x 3/8” cable,
keyed different
• Patented locking mechanism holds the cable
tight at any position
• Patented locking
mechanism holds the
cable tight at any position
• Convenient,
rekeyable cylinder
• Convenient, rekeyable cylinder
• Patented locking mechanism
holds the cable tight at any
position
• Convenient, rekeyable cylinder
• 100% steel braided cable
• Vinyl sleeve prevents scratching
• Compact storage with velcro strap to hold
excess cable
• Compatible with No's 3, 410, 411, 6835 and
6836 safety lockout padlocks
• Weather tough and rust resistant lock body
and cable
excess cable
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Weather tough and rust resistant lock body
and cable
236
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
NO 1 PADLOCK – MLKS1D
NO 1 PADLOCK – MLKS1DLJ
• Keyed different
• Keyed different
• 2-1/8” wide laminated steel
body for superior strength
• 1-3/4” wide laminated
steel body for superior
strength
• Keyed different, extra
long shackle
• Hardened boron alloy shackle for superior cut resistant
• Removable cylinder can be
replaced or repinned
• Hardened steel shackle
for extra cut resistance
• Hardened steel shackle for
extra cut resistance
• 4-pin cylinder helps prevent
picking
• Dual locking levers provide extra pry resistance
• Solid brass bodies & cylinders provide excellent corrosion resistance
• Thousands of key changes maximize
key integrity
• Dual locking levers provide extra
pry resistance
key integrity
NO 1 PADLOCK – MLKS1LJKA-2126
NO 15 PADLOCK – MLKS15KA
• Keyed alike
• Keyed alike, extra long
shackle
• Keyed alike
strength
• Dual locking levers provide extra pry
resistance
strength
• Hardened boron alloy
shackle for superior cut resistant
• Set your own combination convenience
• Resettable to any of 10,000 personalized
combinations
key integrity
BITS, BLADES
& ABRASIVES
strength
POWER TOOLS
CONCRETE & MASONRY
• 5 spool pin tumbler cylinder for added
pick resistance
MATERIAL HANDLING
HIGH SECURITY PADLOCK – MLKS6321D
LIGHT EQUIPMENT
PADLOCKS
NO 175 PADLOCK – MLKS175LH
• 2-1/4” shackle
• 2-1/4” shackle
• 2” wide body
• 2” wide body
• 2” wide body
• Solid brass case for strength
and weatherability
and weatherability
and weatherability
• Set your own combination
convenience
convenience
convenience
combinations
combinations
• 4 digit dialing allows for thousands of possible
combinations
LANDSCAPING
NO 175 PADLOCK – MLKS175DLH
• 1” shackle
HAND TOOLS
NO 175 PADLOCK – MLKS175
• Change key included
• 1”, black
• 1”, die cast, black
• Keyed alike, 4 pack
• 2” wide solid brass case for
strength and weatherability
• 2” wide solid brass case for
strength and weatherability
• Shrouded hardened steel
shackle provides maximum
cut resistance
• Shrouded hardened steel
shackle provides maximum
cut resistance
strength
• Set your own combination convenience
• 4 digit dialing allows for thousands of possible
combinations
resistance
• Change key included
• Thousands of key changes maximize key
integrity
GENERAL SUPPLIES
NO 178 PADLOCK – MLKS178BLK
• Hardened steel shackle for extra cut resistance
SAFETY SUPPLIES
• Tapered ends for easy insertion
WORKWEAR
237
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
PADLOCKS
NO 3 PADLOCK – MLKS3DLH
NO 3 PADLOCK – MLKS3KALF
• Keyed different, extra long
shackle
• Keyed alike
• Keyed alike, extra
long shackle
strength
resistance
integrity
integrity
BITS, BLADES
& ABRASIVES
HAND TOOLS
LANDSCAPING
resistance
integrity
NO 3 PADLOCK – MLKS3KD
NO 410 PADLOCK – MLKS410RED
NO 410 PADLOCK – MLKS410YLW
• Keyed different
• Keyed different
• Keyed different
strength
• 1-1/2” wide, 1-3/4” tall nonconductive xenoy body
• 1-1/2” wide, 1-3/4” tall nonconductive xenoy body
• Extra long standard steel shackle for added locking versatility
• Extra long standard steel shackle for added locking versatility
• Special tri-lingual safety lockout
markings and labels
• Brass grommet withstands up
to 80 lbs. of pullout force
• Key retaining feature ensures padlock is not
left unlocked
• 12 tags p/bag
NO 5 PADLOCK – MLKS5KD
• Keyed alike
• Keyed different
• Keyed alike
• 2” wide laminated steel
• 2” wide laminated steel
• 1-1/8” wide body
shackle for superior cut
resistance
shackle for superior
cut resistance
• 5-spool pin tumbler cylinder for added pick
resistance
• Weather tough and rust
resistant lock body and
cable
• Removable cylinder can be replaced or
repinned
• Special tri-lingual safety lockout markings
and labels
• Key retaining feature ensures padlock is not
left unlocked
resistance
integrity
• Dual ball bearing locking mechanism resists
pulling and prying
• Laminated steel body for
superior strength
excess cable
• Body and cylinder covers protect locks from
water, dirt and grime
• Heavy steel bodies withstand forcible attacks
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
strength
238
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
SOLID BRASS PADLOCK – MLKS6840KA
SOLID STEEL PADLOCK – MLKS6230D
• Keyed different
• Keyed alike
• Keyed different
• 1-3/4” wide solid brass body
• 1-3/4” wide solid brass body
• 2-1/2” wide, hardened solid
steel body
• Removable cylinder can be
replaced or repinned
• Dual deadbolt locking for
extreme resistance to prying
• Solid iron shackle shroud
resists harsh physical attacks
• 5-spool pin tumbler cylinder for added pick
resistance
• Solid brass bodies & cylinders provide excellent corrosion resistance
• Removable cylinder can be replaced
or repinned
pulling and prying
SOLID STEEL PADLOCK – MLKS7045KA
WEATHER TOUGH PADLOCK – MLKS6121D
• Keyed different
• Keyed alike
• Keyed different
• Solid steel body
• Solid steel body
• Dual deadbolt locking for
extreme resistance to prying
• Tamper proof hinges help
resist prying
POWER TOOLS
SOLID STEEL PADLOCK – MLKS7040D
CONCRETE & MASONRY
• 5-spool pin tumbler cylinder for added
pick resistance
• Hardened boron alloy shackle
for superior cut resistant
MATERIAL HANDLING
SOLID BRASS PADLOCK – MLKS6840D
LIGHT EQUIPMENT
PADLOCKS
for superior cut resistance
• Removable cylinder can be replaced
or repinned
pulling and prying
BITS, BLADES
& ABRASIVES
• 5-spool pin tumbler cylinder
for added pick resistance
• Body and cylinder covers protect locks from
water, dirt and grime
WEATHER TOUGH PADLOCK – MLKS6121KA
HAND TOOLS
• Heavy steel bodies withstand forcible attacks
• Keyed alike
for superior cut resistant
• 5-spool pin tumbler cylinder
for added pick resistance
• High security padlock resists tough abuse
GENERAL SUPPLIES
• Removable cylinder can be replaced or
repinned
LANDSCAPING
SAFETY SUPPLIES
WORKWEAR
239
HITCHES
COUPLER LOCK – MLKS377DAT
COUPLER LOCK – MLKS378XDAT
• 2” drop hitch
• Universal couple fits
1-7/8” & 2” couplers
• Fits 2-5/16”
• 6000# capacity steel
• Keyed different
• 4-pin cylinder helps
prevent picking
• Adjusts to fit many
makes and models
• Adjusts to fit many
makes and models
• 2” ball
resistance
resistance
integrity
integrity
BITS, BLADES
& ABRASIVES
POWER TOOLS
MATERIAL HANDLING
BALL AND HITCH COMBO – MLKS2861ATSC
CONCRETE & MASONRY
LIGHT EQUIPMENT
GENERAL SUPPLIES
• Keyed different
DROP HITCH – MLKS2827ATSC
HITCH BALL – MLKS2853DATSC
• 2” drop hitch
• 2” ball
• 2” ball
• .75” rise
• Lock nut washer/nut included
• Class III
RECEIVER PIN & CLIP – MLKS371DAT
TRAILER HITCH LOCK – MLKS375DAT
• 2-5/16” ball
• Class III/IV, 5/8”
• Hardened steel for
improved cut and
shear resistance
• Class III/IV receiver
hitch lock, 5/8” pin
• 5/8” hitch pin is included
• Nickel and chrome plated
• Hardened receiver
pins for increased
shear strength
TOOL BOXES
FIELD STATION – DIAS674-990
PIANO BOX – DIAS682-990
SLOPE LID BOX – DIAS680-990
• 43” x 62” x 79”
• 60” x 31-11/13” x 49-1/2”
• 60” x 30”
• Hidden 60” long
storage locker for
longer equipment
• Heavily reinforced
16 gauge steel
construction
• Full length Tilt-NStow™ hinged
shelf tilts up
• Upper level office
center with extra
large slanted desktop
• Door and body reinforced for superior
strength, rigidity and
resistance to break-ins
• Bolt cutter free
locking system
• Two full length, deep back wall shelves for
storing materials and supplies
• Small item storage bin on both sidewalls
• Convenient access holes for routing electrical
cable to interior
• Fully weather stripped lower section resists
moisture and dust
• Built-in shelves in both doors for storing small
parts or tools
• Designed for improved resistance to dust and
moisture to protect contents and interior from
damage
• Heavy-duty gas springs are protected and surrounded by a guard to prevent damage
• Reinforced, high strength lid resists break-ins
• Rain drain system drains locking housings
• Extra strong, tall bottom bolster design
• Extra tall and deep handle recesses to prevent
injuries
• Handle recesses helping to reduce injuries
• Rain drain system protects contents
• Extra strong bottom bolsters for heavy loads
• Bolt cutter free locking system protects contents from break ins
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• Precision pin tumbler mechanism resists
picking
240
Call us at: 8 00-6 6 9-778 8
GENERAL SUPPLIES
TOOL CHESTS –
WELDER’S BOX – DIAS650-990
• 31” x 18” x 15-1/2”
• DIAS652-990 –
36” x 17” x 19-1/2”
• 30” x 16” x 12”
16 gauge steel
construction
• DIAS653-990 –
42” x 20” x 23-3/4”
16 gauge steel
construction
• DIAS654-990 –
48” x 24” x 27-3/4”
• DIAS655-990 – 36” x 24” x 27-3/4”
• Welder’s box has a
cut-out for storing tools still connected to
fuel tanks
• Handle recesses helping to reduce injuries
• DIAS656-990 – 48 ”x 30” x 33-3/4”
• Welded heavy-duty hasp for using padlock
• Heavy-duty locking arms support lid
• Superior strength to resist break-ins
• Fold-away lifting handles
• Bolt cutter free
locking system
• Super-duty hinge resists forced entry
• Grip-rite channels resist damage
CONCRETE & MASONRY
• Flat exterior design
eliminates exposed handles and improves job
site safety
MATERIAL HANDLING
SMALL TOOL CHEST – DIAS651-990
LIGHT EQUIPMENT
TOOL BOXES
• Rain drain system protects contents
POWER TOOLS
• Extra-strong bottom bolsters for heavy loads
STORAGE
• High strength,
beveled edge lid
• Improved rotary
locks, easier closing
2-stage
• Improved rotary
locks, easier closing
2-stage
• Lift out tool tray, high strength molded, two
fixed compartments and three moveable
dividers
• Lift out tool tray, high strength molded, two
fixed compartments and three moveable
dividers
• End mounted EZ-Palm push bars
• End mounted EZ-Palm push bars
• Drill resistant lock cylinders
• Drill resistant lock cylinders
• Built-in storage bin on both ends
• Built-in storage bin on both ends
• Heavy-duty posi-lift gas springs
• Heavy-duty posi-lift gas springs
LANDSCAPING
• High strength,
beveled edge lid
HAND TOOLS
SINGLE LID ALUMINUM FULLSIZE DEEP
TRUCK BOX – DIAS387-980
BITS, BLADES
& ABRASIVES
SINGLE LID ALUMINUM FULLSIZE DEEP
EXTRA WIDE TRUCK BOX – DIAS389-980
FUEL TANKS
PRE-VENT CAP – DIAS1910-5
• L-shaped, 105 gal.
• L-Shaped, 52 gal.
• Heavy-duty, reinforced
steel construction
• Pre-Vent cap for
liquid transfer tanks
• Full center baffles
• Heavy-duty, reinforced steel
construction
• 2” NPT reinforced bungs
• Full center baffles
• Convenient lifting rings
• 2” NPT
reinforced bungs
• Lockable cap and coupler
• Convenient lifting rings
• Lockable cap and coupler
SAFETY SUPPLIES
LIQUID TRANSFER TANK – DIAS482-000
GENERAL SUPPLIES
LIQUID TRANSFER TANK – DIAS480-000
WORKWEAR
241
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GENERAL SUPPLIES
FUEL TRANSFER
PUMP ACCESSORIES
FIL-RITE
FILTERS
FILTERS – FILSF1810HM0
FILTERS – FILSF1810PM0
• FILS1200KTF7018 –
10 microns particulate
filter kit
• 10 microns hydrosorb filter kit
• 10 microns particulate filter kit
• 18 GPM
• 18 GPM
HOSE
METER KIT – FILSFR807CMK
NOZZLE – FILSN0757DAU10
• FILS700-56 – 3/4” x 12’
buna hose
• Meter kit for AC and
DC pumps
• 3/4” diesel spout
• FILS1210KTF7019 –
10 microns hydrosorb
filter kit
• 12 GPM
• FILSFRH07514 –
3/4” x 14’ hose w/ static
wire threaded fitting
• FILSFRH07520 – 3/4” x 20’ hose w/ static
wire threaded fitting
HAND TOOLS
BITS, BLADES
& ABRASIVES
FUEL TRANSFER PUMPS
DC TRANSFER PUMP – FILS1210
PISTON HAND PUMP – FILSF152
ROTARY HAND PUMP – FILS112
• 15 gpm
• 20 gpm per 100 strokes
• Explosion proof UL
listed 1/4 hp motor
• Lightweight cast aluminum
body
• 10 gpm per
100 revolutions
• Heavy-duty switch,
thermal overload protection and junction box
• Stainless steel inner liner
• Heavy-duty battery cable
• Corrosion proof adjustable
suction pipe
• Iron rotor
• “Easy mount” to
tank adapter
• Effective with medium
viscosity liquids, as
well as oils, gasoline
and diesel fuels
• Lightweight cast aluminum body
• Built in check valve and strainer
• “Easy mount” to tank adapter
• Built in strainer
• Pump flow can be reversed by rotating piston
180 deg.
• 12’ hose with static ground wire
• Steel yoke handle
• Anti-siphoning device
• Pump may be padlocked
• Anti-siphoning device
• All models UL listed
• Automatic bypass valve
• Corrosion proof adjustable suction pipe
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
FIL-RITE
242
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
STARLITE
• StarLite-SM
clear/clear anti-fog
• StarLite-SM clear/clear
StarLite-SM gray temple/gray lens
• GATS460M – Clear
temple/indoor-outdoor
clear mirror
• Incredibly light, allaround impact protection
• GATS461M – Gray
temple/red mirror lens
• Popular design resembles sunglasses
• GATS4675 – Amber temple/amber lens
• Economically priced
• GATS4676 – Blue temple/pacific blue lens
• Scratch resistant, hardcoated 100% polycarbonate lenses feature revolutionary, dual 9.75
base curvature viewing area
• GATS4678 – Gray temple/gray anti-fog lens
• Snug and comfortable fit
• Deep universal fit temples
• Lens blocks more than 99.9% of UVA and
UVB light
UVB light
• Meets or exceeds ANSI Z83.1 standards
• Meets or exceeds ANSI Z83.1 standard
STARLITE SQUARED
SCORPION
• GATS469M – Gray temple/blue mirror lens
• GATS440M – Clear temple, clear mirror lens
• GATS16GB75 – Black
frame/amber lens
• Incredibly light, all-around impact protection
• GATS441M – Gray temple, red mirror lens
frame/clear anti-fog lens
• GATS4475 – Amber temple, amber lens
• GATS16GB7M – Black frame/gold mirror lens
• GATS4478 – Gray temple, gray anti-fog lens
• GATS16GB80 – Black frame/clear lens
• GATS4479 – Clear temple, clear anti-fog lens
• GATS16GB83 – Black frame/gray lens
• GATS447M – Gray temple, gold mirror lens
• GATS16GB86 – Black frame/mocha lens
• GATS4480 – Clear temple, clear lens
• GATS4483 – Gray temple, gray lens
• GATS16GB8M – Black frame/silver
mirror lens
UVB light
• GATS4486 – Mocha temple, mocha lens
• Contemporary styling
• GATS448M – Gray temple, silver mirror lens
• Adjustable length temples and fingertip
nosepiece
• Incredibly light,
all-around impact
protection
• GATS4687 – Brown temple/mocha
anti-fog lens
• GATS468M – Gray temple/silver mirror lens
• Four point ratchet temple
• Frame support behind lens
• Scratch and impact resistant, hardcoated
lens blocks more than 99.9% of UVA and
UVB light
LANDSCAPING
• Incredibly light eyewear, weighs less than an
ounce
• GATS4686 – Brown temple/mocha lens
HAND TOOLS
• GATS4683 – Gray temple/gray lens
BITS, BLADES
& ABRASIVES
• Surpasses even the coolest eyewear styles
• GATS4680 – Clear temple/clear lens
POWER TOOLS
• GATS449M – Gray temple, blue mirror lens
• Meets and exceeds ANSI Z87.1 + standards
• GATS4679 – Clear temple/clear anti-fog lens
CONCRETE & MASONRY
STARLITE – GATS3683
MATERIAL HANDLING
STARLITE – GATS3679
LIGHT EQUIPMENT
SAFETY GLASSES
• Soft, pliable temples and a fingertip nosepiece
offer long-wearing comfort
• Full brow protection
• Scratch resistant, hardcoated 100% polycarbonate lens
GENERAL SUPPLIES
• Snug and comfortable fit, helps minimize
slippage
SAFETY SUPPLIES
WORKWEAR
243
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
SAFETY GLASSES
SCORPION MAG
STROBE
HAWK
• GATS16MC15 – Clear
lens, 1.5 diopter
frame/gray lens
• GATS16MC20 – Clear
lens, 2.0 diopter
• GATS16MC25 – Clear lens, 2.5 diopter
• GATS55US80 – Red,
white & blue
frame/clear lens
• GATS14GB0M – Black
frame/indoor-outdoor
clear mirror
• GATS16MG15 – Gray lens, 1.5 diopter
• GATS14GB6M – Black frame/mocha
mirror lens
• Visitor multi-purpose eyewear
• GATS14GB75 – Black frame/amber lens
• Constructed with lightweight and durable
uncoated polycarbonate lenses
• High quality, cost effective eyewear
• Tough nylon frame features integral browguard and molded in side shields
• GATS14GB86 – Black frame/mocha lens
• Contemporary styling
• Adjustable temples
• Adjustable length temples and fingertip
nosepiece
• 100% polycarbonate lens blocks in excess of
99.9% of harmful UVA and UVB light up to
380nm
• Bifocal design
• GATS14GB83 – Black frame/gray lens
• GATS14GB8M – Black frame/silver
mirror lens
• Feather light for all day comfort
• Rimless, one piece “winged” lens design
• Tough nylon frame with adjustable temples
• Hardcoated lens is scratch resistant
• Scratch and impact resistant hardcoated lens
blocks more than 99.9% of UVA and UVB light
• Meets or exceeds ANSI Z87.1 standard CSA
Z94.3 certified
COVERALLS – GATS6880
SIDE SHIELDS
• Clear polycarbonate
• GATSAT1 – Clear slip-on
• Generous size,
specifically designed
to wear over
prescription eyewear
• GATSSR1 – Clear screw-on
• Cost-effective alternative to prescription
safety eyewear
• Single piece lens with molded-in side shields
wraps around for unobstructed field of vision
• Lightweight, impact resistant polycarbonate
lens offers solid protection and blocks more
than 99.9% of UVA and UVB light
• Meets or exceeds ANSI Z87.1 standard CSA
Z94.3 certified
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• Rateched temple
• GATS14GB1M – Black frame/red mirror lens
244
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
30-06 READERS SERIES – SAWSOL3006C25
• SAWSOL3006B15 –
Brown lens/tortoise
frame, 1.5 + bifocal
• Clear lens/black
• SAWSOL3006B20 –
Brown lens/tortoise frame, 2.0 + bifocal
• SAWSOL3006B25 – Brown lens/tortoise
• One-piece wraparound lens for excellent peripheral vision
• Shatter resistant polycarbonate lens
• Maximum ultraviolet protection
38 SPECIAL SERIES-SAFETY GLASS –
SAWSSW890MI
• Mirror lens/black frame
• Shatter resistant polycarbonate lenses, ultimate impact and ultraviolet protection
• Stylish extended ergonomically contoured
temples
• Pressure pads for a secure fit
CONCRETE & MASONRY
• SAWSOL3006C15 – Clear lens/black frame,
1.5 + bifocal
• SAWSOL3006C20 – Clear lens/black frame,
2.0 + bifocal
• Polycarbonate lenses for the ultimate in eye
protection
MAGNUM SERIES-SAFETY GLASS –
SAWSSW152PCMI
• Smoke lens/
black frame
• Copper blue block
lens/black frame
• Gold mirror lens/
black frame
• Shatter resistant
polycarbonate lenses, ultimate impact and
ultraviolet protection
• Distinctive, ultra-contemporary styling
• One-piece wraparound lens for excellent
peripheral vision
peripheral vision
SAWSSW152PCSI
SAWSSW154RMI
SAWSSW155GROI
• Smoke lens/
black frame
• Red mirror lens/
copper frame
• Indoor/outdoor lens
peripheral vision
peripheral vision
• Lens hinge and nose pad post molded as
one unit
• Straight back bayonet design temples eliminate mastoid bone pressure
PHANTOM SERIES-SHOOTING GLASS
PHANTOM SERIES-SHOOTING GLASS –
SAWSSW550SMI
• Futuristic, frameless design
• Lens hinge and nose pad post molded as
one unit
• Futuristic,
frameless design
• Stylish extended ergonomically contoured
temples
• Pressure pads for a secure fit
• Straight back bayonet design temples eliminate mastoid bone pressure
SAFETY SUPPLIES
• SAWSSW550CI – Clear lens/pewter temples
• Silver mirror
lens/chrome temples
GENERAL SUPPLIES
• SAWSSW550SI – Smoke lens/black temples
• Black frame
LANDSCAPING
• SAWSSW550ORI –
Orange lens/copper
temples
HAND TOOLS
SAWSSW152PCCBI
BITS, BLADES
& ABRASIVES
38 SPECIAL SERIES-SAFETY GLASS –
SAWSSW890SI
POWER TOOLS
• Soft rubber nose pad with self adjusting fingers for all day comfort
• Black only
MATERIAL HANDLING
30-06 READERS SERIES
LIGHT EQUIPMENT
SAFETY GLASSES
WORKWEAR
245
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
SAFETY GLASSES
ACCESSORIES
SAFETY GLASS-CARRYING CASE –
SAWSSWCPI
SAFETY GLASS-STRAP – SAWSSWCUFFSI
• Carrying pouch w/
belt clip
• Velcro closure
• Slip on cotton retainer
• Handy belt clip for
secure storage
• Smith & Wesson imprinted on side
• Adjustable tension bead keeps safety glasses
snug and secure
SAFETY GLASSES
CUDAS
CUDAS
DIRECT VENTILATION GOGGLES – AASS10260
• AASS19013 – Cudas
clear replacement lens
• AASS19142 – Black
frame, clear lens
• Clear lens, green frame
• AASS19119 – Cudas
amber replacement lens
• AASS19143 –
Black frame, clear
fog-guard lens
• Economical protection
BITS, BLADES
& ABRASIVES
• AASS19120 – Cudas vermillion
replacement lens
• Direct ventilation
• AASS19144 – Black frame, smoke lens
• AASS19121 – Cudas clear fog guard
replacement lens
• AASS19148 – Black frame, vermillion lens
• AASS19149 – Black frame, amber lens
• AASS19157 – Blue frame, clear lens
• AASS19563 – Black frame, indoor/outdoor lens
• Six base lens curve and folded back lens
design provide increased peripheral vision
and protection
LANDSCAPING
HAND TOOLS
• Stylish frames made of durable,
modified nylon
• Meets ANSI Z87.1/CSA Z94.3 standards
NEMESIS
NOMADS
ORACLE
frame, clear lens
frame, clear lens
frame, clear lens
• AASS19805 –
Black frame, clear
fog guard lens
frame, smoke lens
frame, smoke lens
• AASS19535 – Black frame, metallic blue lens
• AASS19806 – Black frame, smoke mirror lens
• Lightweight construction with detachable side
shields and universal bridge
GENERAL SUPPLIES
• AASS31004 – Black frame, blue mirror lens
• AASS19808 – Black frame, blue mirror lens
• Soft touch temples
• Lightweight construction
• Sleek, sporty style
• Single lens wrap-around protection
• Soft touch temples
• Meets ANSI Z87.1+ standards
• Single lens wrap-around protection
• Meets ANSI Z87.1+ and CSA Z94.3 standards
WORKWEAR
SAFETY SUPPLIES
• Lightweight construction
246
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
LIGHT EQUIPMENT
SAFETY GLASSES
REVOLUTION GOGGLES
MATERIAL HANDLING
frame, clear anti-fog lens
• AASS10542 – Smoke
frame, clear lens
• VisiClear anti-fog, antiscratch, anti static coating is standard on all
lenses
• Large eye Rx insert
CONCRETE & MASONRY
• Expanded visual field
• Cross vent technology keeps air flowing in and
moisture or chemical splashes out
• Polycarbonate lens provides superior impact
resistance, and 99% polycarbonate lens
HARLEY DAVIDSON – UVXSHD402
• Silver frame, blue
mirror lens
• UVXSHD101 – Black
frame, clear lens
• Black frame, silver
mirror lens
• Legendary Harley
Davidson name and log on each frame,
engraved on each lens
frame, espresso lens
• UVXSHD103 – Black frame, gold mirror lens
• Legendary Harley
Davidson name and log on each frame,
engraved on each lens
• Impact resistant polycarbonate lenses provide
99.9% UVA and UVB protection
• Legendary Harley Davidson name and log on
each frame, engraved on each lens
• Scratch resistant hard coat that extends the
useful life of the lens
• Adjustable temple length
• Complimentary hang cord
HAND TOOLS
HARLEY DAVIDSON
BITS, BLADES
& ABRASIVES
HARLEY DAVIDSON – UVXSHD100
POWER TOOLS
SAFETY GLASSES
HARLEY DAVIDSON
frame, gray lens
• UVXSHD603 – Black frame, mirror 50 lens
LANDSCAPING
frame, clear lens
• UVXSHD604 – Black frame, silver mirror lens
GENERAL SUPPLIES
• Legendary Harley Davidson name and log on
each frame, engraved on each lens
SAFETY SUPPLIES
WORKWEAR
247
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
SAFETY GLASSES
HUNTSMAN
MODEL K FACESAVER CAP ATTACHMENT –
KEDS1000
MODEL P CAP ADAPTER – KEDS10217
CLEAR LENS – KEDS22644
• Ratchet headgear adjusts
in 1/16” increments to
exact head size
• Locking device holds visor
securely in the down position or up out of the way
• 8” x 15-1/2”
• Soft, absorbent wraparound foam cushioned
Cool Max sweatband
• “Turn-button” visor attachment holds visor securely
and provides fast, easy
attachment and replacement
• Contour shape gently hugs the natural shape
of head
• Lenses are available
• CE approved
MASKS
NUISANCE DUST MASK – GERS1501
POWER TOOLS
• NOT A RESPIRATOR
• DOES NOT provide
lung protection
• To reduce the irritating
effects from non-toxic particles such as
pollen, common household dust and cut grass
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Adjustable nosepiece
248
AIR PURIFIERS
ADVANTAGE 1000 RESPIRATOR –
MSAS805408
ADVANTAGE 1000 RESPIRATOR CARTRIDGES
– MSAS815359
ADVANTAGE 1000 RESPIRATOR CARTRIDGES
– MSAS815366
• Medium
• GME cartridges
• Black, with speaking
diaphragm and nose cup
• Organic vapor, chlorine,
sulfur dioxide, chlorine
dioxide, hydrogen
chloride, ammonia,
methylamine, formaldehyde, hydrogen fluoride
• P100-particulate filter
(99.97% filter efficiency
level)
• Full face respirator features a wraparound flexible lens that offers excellent fit and comfort
• Super-soft Hycar rubber
dioxide, hydrogen
chloride, ammonia, methylamine, formaldehyde, hydrogen fluoride
• Flexible urethane lens that is integrally bonded
to the face piece
COMFO CLASSIC RESPIRATOR – MSAS808074
COMFO CLASSIC RESPIRATOR – MSAS808073
• Medium
• Large
• Hycar soft feel material
• Silicone-soft
feel material
• Unique face seal
design provides
exceptional fit
COMFO CLASSIC RESPIRATOR-CARTRIDGES –
MSAS815175
• P100-particulate
filter (99.97% filter
efficiency level)
• Unique face seal
design provides
exceptional fit
MSAS815180
MSAS815182
level)
level)
dioxide, hydrogen chloride
dioxide, hydrogen chloride, ammonia, methylamine, formaldehyde, hydrogen fluoride
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
LIGHT EQUIPMENT
RESPIRATORS
PARTICLE RESPIRATOR – GERS1730
RESPIRATORS
DISPOSABLE RESPIRATOR – MDXS2300N95
• Dura-Mesh shell
resists collapsing in
heat and humidity
• Exhale valve reduces
hot air build up and
keeps workers cooler
• For most welding
applications
• Molded nose bridge
seals easily without a
metal nose band
• Dura-Mesh shell
resists collapsing in
heat and humidity
• Naturally contoured
face piece relieves pressure points
• Molded nose bridge seals easily without a
metal nose band
• Naturally contoured face piece with foam nose
flange relieves pressure points
• Flame retardant added to the shell to decrease
flammability
• Softspun lining gives added comfort and
durability
• Shaped for comfort with contour molded nose
bridge and soft foam nose flange
• Flame retardants are added to the shell
• Softspun lining increases comfort and
durability
• Dura-Mesh shell
resists collapsing in heat and humidity
BITS, BLADES
& ABRASIVES
• NIOSH certified for filter efficiency level of
99% or greater
HAND TOOLS
• NIOSH certified for filter efficiency level of
95% or greater
• Exhale valve reduces
hot air buildup for
added comfort
HEAD PROTECTION
SKULLGARD HARDHAT
• Terri sweatband
• MSAS10034018 –
White, 4 pt Fas-Trac
suspension
• MSAS475395 –
Fas-Trac standard
suspension (ratchet)
• MSAS10034019 –
Blue, 4 pt Fas-Trac
suspension
• MSAS482002 –
Fas-Trac standard
welder’s lugs
• Custom design fits
all MSA helmets
• Plastic snaps for
easy installation
• Washable
• MSAS10034020 – Yellow, 4 pt Fas-Trac suspension
• MSAS10034035 – Hi-viz orange, 6 pt Fas-Trac
suspension
• Vented for improved air circulation
• Low profile, smooth crown helmet
• Outstanding thermal properties for areas with
elevated temperatures
• Meets ANSI Z89.1 2003 for type I helmets
• Glaregard underbrim to reduce reflective glare
• Lightweight design for added comfort
• Polyethylene shell
SAFETY SUPPLIES
• Lateral contours above the ear for easy integration of hearing protection
• Natural tan
GENERAL SUPPLIES
ADVANCE CAP VENTED HARDHAT
LANDSCAPING
ACCESSORIES – MSAS696688
• Adds comfort and
sweat absorption
POWER TOOLS
CONCRETE & MASONRY
• Adjustable contoured aluminum nosepiece
and a soft open cell foam nose cushion
helps ensure proper fit and increased
worker comfort
• All the features and benefits
of the GERS1730 with the
added feature of our new
LPD (low pressure drop)
exhalation valve for easy
breathing and increased worker comfort
MATERIAL HANDLING
• Features durable, latex
free ultrasonically welded head straps to withstand tough use
ASPIRE PARTICULATE RESPIRATOR WITH
EXHALATION VALVE – GERS1740
WORKWEAR
249
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
HEAD PROTECTION
SKULLGARD HARDHAT-FULL BRIM –
MSAS475407
• Natural tan
• Fas-Trac standard
• Low profile, smooth
crown helmet
V-GARD FULL BRIM HARDHAT
V-GARD HARDHAT
• MSAS475366 –
Yellow
• MSAS463942 –
White
• MSAS475369 –
White
• MSAS463943 –
Blue
• Fas-Trac standard suspension (ratchet)
• MSAS463944 – Yellow
• Outstanding thermal properties for areas with elevated temperatures
• Self-adjusting crown straps
• MSAS463945 – Orange
• Comfortable and lightweight
• MSAS463946 – Green
• MSAS463947 – Red
• MSAS463948 – Gray (navy)
• Staz-on suspension
BITS, BLADES
& ABRASIVES
POWER TOOLS
V-GARD HARDHAT
REPLACEMENT SUSPENSION-ADVANCE CP –
MSAS10034966
REPLACEMENT SUSPENSION-ADVANCE CP –
MSAS10034967
• MSAS475358 –
White
• 4 pt Fas-Trac suspension
• 6 pt Fas-Trac suspension
• MSAS475359 –
Blue
• Fits Advance Cap
vented hardhat
• Fits Advance Cap
vented hardhat
REPLACEMENT SUSPENSION-SKULLGARD –
MSAS473334
REPLACEMENT SUSPENSION-V-GARD –
MSAS454230
REPLACEMENT SUSPENSION-V-GARD –
MSAS473332
• Staz-on suspensionstandard
• Fits Skullgard hardhat
• Fits V-Gard hardhat
• Fits V-Gard hardhat
• MSAS475360 – Yellow
• Fas-Trac standard suspension (ratchet)
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
HEARING PROTECTION
FOAM EAR PLUG – LETSLPF-1
PRE-SHAPED FOAM EAR PLUG – LETSMAX-1
• Corded
• Uncorded
• 30 NRR rating
• Highest NRR (33)
available in single use
• Ideal size for female
workers
• Improved bell shape delivers maximum
in-ear comfort
WORKWEAR
• Smooth, soil resistant skin prevents dirt
build up
250
• World’s most used
polyurethane earplug
• Improved bell shape delivers maximum in-ear
comfort
• Smooth, soil resistant skin prevents dirt
buildup
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
LIGHT EQUIPMENT
FOOT SAFETY
ALUMINUM FOOT GUARD – ELLS200MEN
MATERIAL HANDLING
• Worn over shoes for maximum
protection to the entire foot
against falling, rolling or flying
objects
• Designed to withstand an impact of 75 ft-lbs.
• Fits any shoe (no rights or lefts)
• Light enough to be worn comfortably all day
MECHANIC’S GLOVES
MECHANIC’S GLOVES
• PRFS11382 – Small
• PRFS16154 – Large
• PRFS11383 – Medium
• PRFS16155 – X-large
• 710 series
• Soft, flexible and durable
Amara synthetic leather
palm and fingers, and
Amara reinforced thumb/
index finger saddle
• 720 trades with touch control
• PRFS11386 – 2XL
• Economy 100 Series
• Rubber tracked webbing helps keep back support in place
• Adjustable two-stage closure helps remind
wearers to lift properly
• PVC palm for secure grip and longer wear
• Akton polymer gel absorbs impact
• Woven elastic cuff for a comfortable fit
• Exclusive pull tab for easy on & off
• Micro-injected closure quick cinching
• Stretchable bias binding with zig-zag stitching
• Amara reinforced
thumb/index finger saddle for added protection and wear
• Soft, flexible and durable Amara synthetic
leather palm and fingers
• PVC palm for secure grip and longer wear
BITS, BLADES
& ABRASIVES
• Durable 280D spandex body cloth provides
breathable comfort, and holds its shape
over time
• Open finger tips on thumb,
index and middle fingers
for maximum tacticity
POWER TOOLS
BACK SUPPORT
CONCRETE & MASONRY
PERSONAL SAFETY
• Akton polymer gel absorbs impact, and shock
• Woven elastic cuff, exclusive pull tab
• Micro-injected closure for quick cinching
• PRFS16333 – Medium
• 810 utility plus
• 820 Box handler
• Soft, flexible and
durable Amara
synthetic leather palm
• Textured PVC palm and
fingertips for secure grip
and longer wear
• 817 thermal utility
• Woven elastic cuff for
a perfect fit
• Padded breathable
spandex back for fit
and comfort
• Breathable, padded stretch spandex for fit
and comfort
• Soft, flexible and durable Amara synthetic
leather palm and fingers
• Exclusive neoprene padding for added knuckle
protection
• Woven elastic cuff for a comfortable fit
• Breathable padded stretch spandex back offers
added protection and comfort
• Woven elastic cuff with hook and loop closure
• Terry thumb brow wipe
• Exclusive neoprene padding for added
knuckle protection
• Smooth thumb and fingertip surfaces
• Machine washable
• Thinsulate lining throughout warms hand without
sacrificing dexterity
• Amara synthetic palm and fingers provide
durability, dexterity and comfort
• Amara reinforced thumb and fingertips
• Neoprene knuckle pad for added protection
SAFETY SUPPLIES
MECHANIC’S GLOVES
GENERAL SUPPLIES
MECHANIC’S GLOVES
LANDSCAPING
MECHANIC’S GLOVES
HAND TOOLS
• Adjustable 1-1/4” knit elastic suspenders
improve the comfort and fit and are
detachable
WORKWEAR
251
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
PROTECTIVE WEAR
KLEENGUARD SELECT COVERALLS
• KIMS58503KC2 – Large-zipper
front, elastic back, wrists,
ankles
• KIMS58504KC2 – X-Large-zipper front, elastic back, wrists,
ankles
• KIMS58505KC2 – 2XL-zipper front, elastic
back, wrists, ankles
• General protection, blue denim color
• Made from a breathable patented Microforce
Barrier SMS fabric that offers significantly
improved barrier protection on submicron size
particles
• Strong abrasion resistant for extended wear
• Offers protection against dry particulates and
light liquid sprays
ANCHORS
GLYDER SLIDING BEAM ANCHOR –
DBIS2110808
PERMANENT ROOF ANCHOR – DBIS2103670
REMOVABLE/REUSABLE ROOF ANCHOR –
DBIS2103673
• Provides complete
horizontal mobility
• Permanent roof anchor for
open trusses, joists and rafters
• Removable/reusable 1/4”
thick steel roof anchor
• Anchor effortlessly slides
across the beam on its
wear pads
• Complete with integral D-ring
anchorage point
• Complete with zinc plated
forged alloy steel O-ring
• Includes weather tight monoprene thermoplastic cap with
UV inhibitors
• Nail or bolt into the sheeting and joist,
rafter, etc.
• Stainless steel construction for corrosion
resistance
• Positive spring loaded engagement provides
precision adjustment
• Designed to be removable. It may be used
again after an inspection
• Complete with flashing to prevent water leakage through the roof during construction
• 5,000 lbs. minimum breakage strength
• Pin retainment system to prevent loss
or damage
• Fits up to 2 x 8 roof truss, joists or rafter
• Replaceable wear pads
• Meets or exceeds all applicable industry standards including OSHA and ANSI
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent
ANSI Z359
• Pins install from top for easier installation
• 5,000 lbs. minimum breaking strength
• Fits flange 3-1/2” to 12” wide and up to
1-1/4” thick
• Length when flat, 25”
ANSI Z359
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Simply install by clamping onto joist, rafter, etc.
252
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
REUSABLE ROOF ANCHOR – DBIS2103676
CONCRETE ANCHOR STRAP – DBIS2100050
• Removable/reusable 1/4” thick steel roof
anchor
• Nail into the sheathing and joist, rafter, etc.
• Complete with zinc plated forged alloy
steel O-ring
• Once concrete sets, a safe 5,000 lbs. fall
arrest anchorage point exists
• Nail or bolt into the sheathing and joist,
rafter, etc.
• When no longer needed, simply cut strap and
discard
• Designed to be removable, it may used again
after an inspection
• Durable 1-3/4” polyester webbing construction
with full length outer wear pad for ultimate
abrasion resistance
ANSI Z359
• Forged alloy steel D-ring provides compatible
connection point for your lanyard or self
retracting lifeline
ANSI Z359
ANSI Z359
BITS, BLADES
& ABRASIVES
ANCHORAGE CONNECTORS
POWER TOOLS
• Complete with cadmium plated
forged alloy steel D-ring
• Loop on end of anchor slips
over rebar, concrete is then
poured on top of loop and
wear pad
• Includes 20 16D nails for
single use
• Disposable anchor strap is
designed to provide a temporary anchorage on concrete forms
CONCRETE & MASONRY
• 3 lbs. total weight
• Complete roof anchor kit with
Delta no-tangle harness, rope
adjuster with shock absorbing
lanyard, 50 ft lifeline assembly,
counterweight, removable roof
anchor and carrying bag
• Steel construction
MATERIAL HANDLING
• 5,000 lbs. anchorage point
ROOF ANCHOR FALL PROTECTION KIT –
DBIS2104169
LIGHT EQUIPMENT
ANCHORS
TIE OFF ADAPTOR
• DBIS1003000 – 3’ in length
• DBIS1003006 – 6’ in length
HAND TOOLS
• Pass through design makes
attaching to anchorage quick
and easy
• 1-3/4” polyester strength member
• 3” wide polyester wear pad for added abrasion
resistance and product longevity
ANSI Z359
REBAR CHAIN ASSEMBLY – DBISAF77710
• 5.0 machine chain
GENERAL SUPPLIES
ANCHOR ACCESSORIES
LANDSCAPING
• Coated steel hardware for corrosion resistance
and strength
• Zinc plated steel
• Meets or exceeds
OSHA 1926
SAFETY SUPPLIES
• Zinc plated hook
WORKWEAR
253
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
ANCHOR ACCESSORIES
SAFLOK CARABINER – DBIS2000108
SAFLOK STEEL CARABINER – DBIS2000523
• 2-3/16” gate opening
• 11/16” gate opening
• Self-closing/self-locking
gate for increased safety
and security
• Self-closing/self-locking
gate for increased safety
and security
• Steel construction for durability
• Steel construction for durability
• User-friendly design for simple operation even
while wearing gloves
• User-friendly design for simple operation even
while wearing gloves
• High strength construction with a minimum
tensile strength of 5,000 lbs.
• High strength construction with a minimum
tensile strength of 5,000 lbs.
• Compatible with most connecting rings
• Compatible with most connecting rings
ANSI Z359
ANSI Z359
BODY BELTS
BOATSWAINS CHAIR – DBIS1001134
DOUBLE D-RING BODY BELT
• Seat board (12” x 24” x 1”) for
added support and comfort
• DBIS1000023 – Medium
• Integrated tongue buckle body
belt with back D-ring for added
support and versatility
• Side D-rings for connection to restraint
lanyard
• DBIS1000024 – Large
• 1-3/4” wide latex treated polyester webbing
construction for added durability
HAND TOOLS
• Cadmium plated alloy steel hardware for
strength and corrosion resistance
• 3” body pad for added comfort
• Tongue buckle adjustment for fast & easy
donning
• Polyester webbing construction for added
durability
• Coated hardware for corrosion resistance
GENERAL SUPPLIES
LANDSCAPING
HARNESS
5 POINT FULL BODY HARNESS –
DBISAB17550
• Dorsal D-ring
• Tongue buckle leg straps,
pass thru buckle chest and
torso adjusters
• Supple back plaque
• Universal fit
• 1.75” wide polyester web
• Minimum tensile strength less than 5,000 lbs.
• Meets or exceeds OSHA 1926 and ANSI
Z359.1-1998 performance criteria
WORKWEAR
SAFETY SUPPLIES
• Zinc plated stamped steel
254
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
EXOFIT HARNESS
EXOFIT HARNESS
• DBIS1107975 – Small
• DBIS1108500 – Small
• DBIS1101656 – X-large
• Delta no-tangle design for added
comfort and easy donning
• First of a new generation
of harnesses designed
from the ground up for maximum comfort and
performance
• Spring loaded stand up back D-ring ensures
fast, easy, and safe connections
• Constructed from high performance materials
• Incorporates a breathable Aero-Spacer Dri-Lex
lining that immediately draws moisture away
from the body
• Adjustable non-slip chest strap with easy-touse pass-thru buckle
• Ergonomic design built in shoulder, hip and
leg padding
• Parachute buckles on lower shoulder straps
for quick and easy adjustment
• Lycra edging moves with you preventing
uncomfortable rubbing
• Tongue buckle leg straps for fast & easy donning
• One handed quick connect buckles
ANSI Z359
• Back D-ring for connection to fall protection
system
ANSI Z359
• Constructed from high performance materials
• Incorporates a breathable Aero-Spacer Dri-Lex
lining that immediately draws moisture away
from the body
• Ergonomic design built in shoulder, hip and
leg padding
• Lycra edging moves with you preventing
uncomfortable rubbing
• One handed quick connect buckles
• Back D-ring for connection to fall protection
system and side D-rings for work positioning
VEST STYLE HARNESS – DBIS1102001
• Universal fit
• Universal fit
• Spring loaded stand up back Dring ensures fast, easy, and safe connections
• Spring loaded stand up back
D-ring ensures fast, easy, and
safe connections
safe connections
• Constructed from CERTIFIED hi-vis fabric and
reflective tape
• Adjustable non-slip chest strap with easy-touse pass thru buckle
• Ergonomic design incorporates padded
shoulders and neck liner enhancing comfort
and mobility
• Tongue buckle leg straps for fast & easy
donning
durability
durability
• Plated hardware for corrosion resistance
• Simple velcro tool fastener supports for
convenient accessory attachment
• Adjustable non-slip chest strap with easy-touse pass-thru buckle
ANSI Z359
ANSI Z359
ANSI Z359
GENERAL SUPPLIES
• Two chest pockets, one with a snap
closure for carrying safety glasses, phone,
note pad, etc.
LANDSCAPING
STANDARD VEST STYLE HARNESS –
DBIS1102000
HAND TOOLS
HI-VIS WORKVEST & HARNESS
BITS, BLADES
& ABRASIVES
ANSI Z359
POWER TOOLS
• Sewn in back pad and shoulder pads for the
ultimate in comfort
CONCRETE & MASONRY
• Tongue buckle body belt and side D-rings for
added comfort, support and versatility
• First of a new generation of harnesses designed from the ground
up for maximum comfort and
performance
MATERIAL HANDLING
CONSTRUCTION VEST STYLE HARNESS
LIGHT EQUIPMENT
HARNESSES
SAFETY SUPPLIES
WORKWEAR
255
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
HARNESSES
VEST STYLE HARNESS – DBIS1102008
VEST STYLE HARNESS (QUICK CONNECT) –
DBIS1110600
• Universal fit
• Universal fit
• Delta no-tangle design
for added comfort and easy
donning
safe connections
• Side D-rings for work positioning
safe connections
• Adjustable non-slip chest strap with easy-touse quick connect buckle
durability
• Color coded quick connect leg buckles
BITS, BLADES
& ABRASIVES
POWER TOOLS
ANSI Z359
durability
ANSI Z359
HARNESS ACCESSORIES
D-RING EXTENSION FOR HARNESS –
DBIS1201117
• 18” D-ring extension strap
HAND TOOLS
• Snap hook at one end, D-ring at
the other end
• Makes hooking up a lot easier
than trying to attach something
to your own back
COMPLIANCE IN A CAN LIGHT –
DBISAA7010AS
COMPLIANCE IN A CAN WITH ROOF ANCHOR
– DBISAA7051A
• First full body harness
• 5 pt full body harness
• Shock-absorbing lanyard
• Combination rope grab/
shock absorber
• 50’ rope lifeline with attached
double locking snaphook
• Reusable roof anchor bracket
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HARNESS SET
256
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
EZ STOP II TIE BACK SHOCK ABSORBING LANYARD – DBIS1221106
EZ STOP III SHOCK ABSORBING LANYARD –
DBIS1224006
• 6’ of 1” polyester webbing for
durability and longevity
• 6’ of 1” polyester webbing with
abrasion resistant tubular wear
layer webbing for added durability
and longevity
• 6’ of 1-3/8” tubular web jacket
and polyester core for durability
and longevity
• Twin leg 100% tie-off style
helps you remain connected at
all times
• Easy-to-use self locking snap
hooks at leg ends and center
hooks at both ends
hooks at both ends
• Soft cover shock absorber
for comfort
ANSI Z359
• Limits arresting forces to 900 lbs. or less
ROPE LANYARD – DBIS1202354
SHOCKWAVE2 – DBIS1224409
SHOCKWAVE2 SHOCK ABSORBING LANYARD
– DBIS1224306
• 1/2” three strand filament
nylon rope
• Expands to 6’ and contracts
to 4-12’ in reaction to your
movements
movements
• Reduces trip fall hazards, dragging and snagging for complete
freedom of movement
• Reduces trip fall hazards, dragging and snagging for complete freedom of movement
• Twin leg 100% tie off style helps you remain
connected at all times
• Easy-to-use self locking snap hooks at
both ends
• Easy-to-use self locking snap hooks at center
and aluminum hooks (2-1/4” opening) at the
leg ends
• Abrasion resistant tubular webbing for durability and longevity
hooks at both ends
• Exclusive five tuck splice and
seizing method guaranteeing
ANSI Z359
WEB LANYARD – DBIS1201106
LANDSCAPING
• Impact indicator allows user to visually
inspect unit for a fall
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Soft cover shock absorber for comfort
POWER TOOLS
CONCRETE & MASONRY
• Soft cover shock absorber for comfort
• Floating D-ring provides adjustable tie back
point so lanyard can be choked off to itself
MATERIAL HANDLING
EZ STOP II 100% TIE OFF SHOCK ABSORBING
LANYARD – DBIS1220406
LIGHT EQUIPMENT
LANYARDS
ANSI Z359
movements
movements
• Reduces trip fall hazards, dragging and snagging for complete freedom of movement
• Reduces trip fall hazards, dragging and snagging for complete
freedom of movement
• Easy-to-use self locking snap hooks at
both ends
• Twin leg 100% tie off style helps you remain
connected at all times
• Abrasion resistant tubular webbing for
• Easy-to-use self locking snap hooks at center
and at the leg ends
• Meets or exceeds all applicable industry standards including OSHA ANSI and ANSI Z359
• 6’ of 1” polyester constructed
webbing for added durability
• Easy-to-use self-locking snap
hooks at both ends
• Built in wear indicator informs
user when to replace for
added safety
SAFETY SUPPLIES
– DBIS1224406
GENERAL SUPPLIES
– DBIS1224321
WORKWEAR
ANSI Z359
257
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
LANYARDS
WEB LANYARD-ADJUSTABLE – DBIS1201016
• 6’ of 1” polyester constructed
webbing for added durability
hooks at both ends
• Built-in wear indicator informs
user when to replace for
added safety
LANYARDS
POWER TOOLS
SINGLE LEG SHOCK ABSORBING LANYARD –
DBISAE57610
• 6’ single
• 1.75” polyester webbing
• Minimum tensile
strength 5,000 lbs. or less
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Zinc plated stamped steel hooks
• Meets or exceeds OSHA 1926 & ANSI
Z359.1-1998 performance criteria
LIFELINES
REBEL SELF RETRACTING LIFELINE –
DBISAD111A
REBEL SELF RETRACTING LIFELINE –
DBISAD111AR
• Lightest and most compact
11’ SRL
• Swivel on housing
• Lightest and most compact
11’ SRL
LANDSCAPING
• Lightweight and compact aluminum housing construction
weighing only 2.8 lbs.
• Lightweight and compact aluminum housing construction
weighing only 2.8 lbs.
• Best lifeline length to weight
ratio in the industry
• Unique super strength thin webbing for total
security and added length
ANSI Z359
• Unique super strength thin webbing for total
security and added length
• Unique speed sensing brake limits fall arrest
forced to 900 lbs. or less
ANSI Z359
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Unique speed sensing brake limits fall arrest
forced to 900 lbs. or less
• Best lifeline length to weight ratio in
the industry
258
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
ROPE LIFELINE ASSEMBLY – DBIS1202794
• Self-locking snap hook at one
end for easy connection to the
anchorage
• 50’ in length
• 8’ of 1” nylon webbing
• 16’ of 1” nylon webbing
• Compact, lightweight design
• Compact, lightweight design
• All metal braking system for durability
• All metal braking system for
durability
• Quick connect handle for direct
attachment to anchorage or harness
• Self-locking swivel snap hook with
impact indicator
• Designed for smooth consistent operation
ANSI Z359
• DBIS3504430 – 30’ galv. wire rope
• DBIS3103208 – 20’ of 1” nylon
web lifeline for reduced weight
• Stainless steel working components
for corrosion resistance
• Stainless steel working components for corrosion resistance
• 30’ 3/16” galvanized steel wire rope
for durability
• Reserve lifeline retention system for added
safety
• Reserve lifeline retention system wire rope for
durability
• Self-locking swivel snap hook with impact
indicator
• Self-locking swivel snap hook with impact
indicator
• Swiveling anchorage loop to prevent twisting
of lifeline
• Swiveling anchorage loop to prevent twisting
of lifeline
ANSI Z359
ANSI Z359
ANSI Z359
• DBIS3504450 – 50’ galv. wire rope
HAND TOOLS
• DBIS3103108 – 11’ of 1” nylon
web lifeline for reduced weight
• Designed for smooth consistent operation
BITS, BLADES
& ABRASIVES
ULTRA LOK SELF RETRACTABLE LIFELINE
• Self-locking swivel snap hook with
impact indicator
POWER TOOLS
ULTRA LOK SELF RETRACTABLE LIFELINE
• Swiveling anchorage loop ideal for
use with carabiner
CONCRETE & MASONRY
• Meets or exceeds all applicable industry
standards including OSHA and ANSI
TALON SELF RETRACTING LIFELINE –
DBIS3101051
MATERIAL HANDLING
• 5/8” polyester/polypropylene
blend rope for strength and
durability
TALON SELF RETRACTING LIFELINE –
DBIS3101001
LIGHT EQUIPMENT
LIFELINES
ROPE GRABS & LIFELINES
• Static type rope adjuster
design that stays where you
want it and moves when you
move it
• Revolutionary design is less
sensitive to rope variations-it
works on worn rope with no
nuisance lock-ups
• Permanently attached EZ stop
III shock absorbing lanyard
limits arresting forces below OSHA’s limits
• Mobile type, automatically follows worker providing maximum freedom of movement
• Corrosion resistant construction
• Utilizes both inertia and cam locking system
for added safety-preventing “panic-grab”
situations
• 3’ in length
GENERAL SUPPLIES
ROPE GRAB – DBIS5000335
LANDSCAPING
ROPE ADJUSTER LANYARD – DBIS1224005
• Energy absorbing design reduces the forces
generated upon a worker in the event of a fall
• Fits 5/8” diameter rope lifeline
ANSI Z359
SAFETY SUPPLIES
• Corrosion resistant stainless steel and thermoplastic construction
WORKWEAR
259
SAFETY VESTS
ECONO STYLE ESK VEST
ESK LIME VEST – SRMS2080885
REFLECTIVE VEST – SRMS2173356
• SRMS0104143 –
Non-reflective
• Lime mesh ESK w/ white
reflective
• ESK vest with 1” stripe of FOL
hi-index glass bead
• SRMS0104193 –
Lime reflective stripe
• Hook & loop front closure
with black cloth binding
• Dayglow orange
• Conforms to MUTCD
• Bound in black cotton binding
with popular elastic side straps
and hook & loop front closure
• 3/4” x 2” front hook & loop
closure with 3/4” x 8” elastic side straps
• Silver 1” reflective stripes manufactured from
Flex-O-Lite hi-index glass beads
• Orange-knit polyester
• 100% polyester mesh in dayglow orange
CLASS 2 SAFETY VEST
CLASS 2 SAFETY VEST
CLASS 2 SAFETY VEST
• SRMS2030104-L – Large
• SRMS2030110-L – Large
• SRMS2214202 – Large
• SRMS2030105-XL – X-large
• SRMS2030111-XL – X-large
• SRMS2214213 – X-large
• SRMS2030106-XXL – 2XL
• SRMS2030112-XXL – 2XL
• SRMS2214212 – 2XL
• Lime mesh silver reflective
• Orange mesh silver reflective
• Light breathable material
• Light breathable material
• Orange surveyors
lime reflective
• Front velcro closure
• Front velcro closure
• New lightweight material
• Two inside and two outside pockets with reinforced stitching
• Front nylon zipper closure
• 360 deg. visibility on all sides
CLASS 2 SAFETY VEST – SRMS2214210
CLASS 3 SAFETY VEST
CLASS 3 SAFETY VEST
• 2XL
• SRMS2214195 – 2XL
• Lime surveyors
lime reflective
• SRMS2214214 – 2XL
• Lime surveyors
lime reflective
• Orange surveyors
lime reflective
• Two inside and two outside
pockets with reinforced stitching
EYE WASH
EYE WASH STATION – SWFS242016C
ISO-TONE EYE WASH SOLUTION –
SWFS240716
• Two 16 oz. eye wash station
• 16 oz. eyewash station refill
• Can be used on acid and
alkali burns on the skin and
in the eyes
• Can be used on acid and
alkali burns on the skin and
in the eyes
• Brings the affected area back
to natural pH
• Brings the affected area back
to natural pH
• Solution is sterile and contains a phosphate
buffer that aids in the healing process
• Solution is sterile and contains a phosphate
buffer that aids in the healing process
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
260
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
100 PERSON FIRST AID KIT –
SWFS68-2100HERS
16 UNIT FIRST AID KIT – SWFS68-3016HERS
• 10 unit first aid kit
• 100 person first aid kit
• Metal kit box 7-1/2” x
4-1/2” x 2-3/8”
• Metal kit box
9-1/16” x 2-3/8”
SWFS68-2025HERS
9-1/16” x 2-3/8”
• Metal kit box
9-1/8” x 2-3/8”
• Metal kit box
• Metal kit box 4-1/2” x 41/2” x 2-3/8”
POWER TOOLS
SWFS68-2050HERS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
FIRST AID KITS
BITS, BLADES
& ABRASIVES
COOLERS
WATER COOLER – GOTS1610-01-11
• 3 gallon
• 5 gallon
• 10 gallon
• Drip resistant spigot; leak
resistant lid
resistant lid
resistant lid
• Insulated to keep water or
beverage cold
beverage cold
beverage cold
WATER COOLER ACCESSORY –
GOTS0405-06-01
GOTS0976-06-92
GOTS1640-02-331
• 5 gallon replacement lid
• 10 gallon replacement lid
• Mounting bracket
LANDSCAPING
HAND TOOLS
Rubbermaid water coolers
• Horizontal mounting
GOTS8257UN-92
Rubbermaid water coolers
• Durable, weather resistant
construction
SAFETY SUPPLIES
• 7 oz. cup dispenser
GENERAL SUPPLIES
• Durable, weather resistant
construction
WORKWEAR
261
COOLERS
IGLOO
WATER COOLER – IGLS431
• 3 gallon
• 5 gallon
• 10 gallon
• High visibility safety yellow
• HDPE hide won’t chip, peel,
buckle or rust
• HDPE hide won’t chip,
peel, buckle or rust
• HDPE hide won’t chip,
peel, buckle or rust
• Ultratherm insulation for
maximum cold retention
• UV stabilizers prevent fading and cracking in
all exposures
all exposures
all exposures
• Wide mouth pressure fit lid for easy filling
• Reinforced handles and cup dispenser bracket
WATER COOLER ACCESSORY – IGLS6335
• Wire cooler rack
• Cup dispenser
• Cup dispenser
• Fits model 4101
• Black
• Black
• Holds 4-1/2 oz. rolled rim cups
• Holds 6-8 oz. straight rim cone cups
• Replacement lid
• Replacement lid
• Sheet metal cooler rack
• Fits 3 & 5 gallon
coolers
• Fits 10 gallon coolers
• Fits models 431 and 451
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
• Safety red
HAND TOOLS
• Safety red
• Spigots
• Wire cooler rack
• Fits 1, 2, 3, 5, & 10
gallon plastic coolers
• Fits 2-5 gallon coolers
BARRICADE TAPE
HI VISIBILITY BARRICADE TAPE
HI VISIBILITY BARRICADE TAPE
HI VISIBILITY BARRICADE TAPE – KESSBT300
• KESSBT1200 – CAUTION,
CAUTION, CAUTION
• KESSBT1213 – DANGER,
DO NOT ENTER
• CAUTION, CAUTION,
CAUTION
• KESSBT1201 – CAUTION:
DO NOT ENTER
• KESSBT1214 – DANGER,
DANGER, DANGER
• 300’ x 3”
• KESSBT1204 – CAUTION:
OPEN TRENCH
• 1000’ x 3”
• 1000’ x 3”
• Printed with ultra-bond jet black ink which
permeates the plastic surface
• Red poly
• Superior quality virgin yellow opaque poly
material
• Superior quality virgin yellow
opaque poly material
• Scratch-proof and weather resistant
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• White
262
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
LIGHT EQUIPMENT
FLAGGING TAPE
• KESSFTB – Blue
• KESSFTGL – Glo-lime
• KESSFTO – Orange
• KESSFTGO – Glo-orange
• KESSFTR – Red
• KESSFTGP – Glo-pink
• KESSFTW – White
• KESSFTGR – Glo-red
• 300’ x 1-3/16”
• 150’ x 1-3/16”
• Highly visible flagging tape made from
extruded PVC
• Highly visible flagging tape made from
extruded PVC
• Preferred by professional tradesmen, surveyors and sportsmen
• Preferred by professional tradesmen, surveyors and sportsmen
TAPE
MUTUAL INDUSTRIES
UNDERGROUND DETECTABLE TAPE –
MUTS17774-3000-RED
• 3” x 1000’
• 3” x 1000’
• 3” x 1000’
• Blue – water
• Green – sewer
• Red – electric
• Provides the ultimate
protection in preventing costly “dig-ins”
• Provides the ultimate protection in preventing costly “dig-ins”
• 5 mil. double laminated, permanently bold,
black lettered underground detectable tape
MUTS17774-3000-Y
BITS, BLADES
& ABRASIVES
MUTS17774-3000-GR
POWER TOOLS
MUTS17774-3000-B
CONCRETE & MASONRY
RIBBON MARKER FLAGGING TAPE
MATERIAL HANDLING
RIBBON MARKER FLAGGING TAPE
• 3” x 1000’
• Yellow – gas
HAND TOOLS
MUTUAL INDUSTRIES
LOCKING CABLE TIES – MUTS14970-7
• 11” natural
• 7” natural
• Nylon ties come
packed in 100
piece poly bags
• Nylon ties come
packed in 100
piece poly bags
GENERAL SUPPLIES
LOCKING CABLE TIES – MUTS14970-11
LANDSCAPING
TIES
SAFETY SUPPLIES
WORKWEAR
263
FIRE EXTINGUISHERS
FIRE EXTINGUISHER BRACKET
MULTI-PURPOSE FIRE EXTINGUISHER –
KIDS466112
KIDS466204
• KIDS366242 – 10 lb. bracket
• 5 lbs.
• 10 lbs.
• KIDS466400 – 5 lb. bracket
• Ideal for common industrial use:
office, hotels, schools, etc
• Ideal for industrial applications
such as hospitals, universities,
warehouse and plant locations
• Strong aluminum valve body for
standard commercial applications
• Designed to meet most commercial and industrial specifications
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
• Seamless aluminum and steel cylinders have a
chip resistant epoxy finish
• Reliable pressure gauge for fast and easy
pressure checks
• Superior agent provides higher UL rating than
other agents
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
• Handle made from pressed heavy gauge metal
for added strength
• Mar-resistant pictogram mylar label
• Designed to meet most commercial and
industrial specifications
pressure checks
other agents
• Handle made from pressed heavy-gauge metal
for added strength
KIDS466206
KIDS466227-01
• 20 lbs.
• 2.5 lbs.
• Designed for high hazard
industrial application
• Ideal for vehicles, apartments
and trailers
pressure checks
pressure checks
other agents
other agents
for added strength
for added strength
GAS CANS
1 GAL TYPE I SAFETY GAS CAN – JUSS10301
2 GAL TYPE II SAFETY GAS CAN – JUSS10527
• Designed with a
single spout for filling and pouring
• Designed with a
single spout for filling and pouring
• Designed with two
openings, one for
pouring, one for filling
• Self-closing
leakproof lid
• Self-closing
leakproof lid
• Pouring opening is equipped with a flexible
metal hose
• Heavy-duty, high grade coated steel
construction
construction
• Both openings self-close
• Meets OSHA and NFPA requirements
construction
• Certified by FM, UL & ULC
WORKWEAR
264
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
2.5 GAL TYPE I SAFETY GAS CAN –
JUSS10555
• Designed with a single
spout for filling and
pouring
spout for filling and pouring
• Blue- frequently used for
storage of kerosene
• Self-closing leakproof lid
• Heavy-duty, high grade
coated steel construction
coated steel
construction
• Yellow-frequently used to
designate diesel
• Meets DOT and HM-181
requirements, UN
approved... UN marking
1A1/Y1.2/100
• Designed with two openings, one for pouring,
one for filling
• Pouring opening is equipped with a flexible
metal hose
construction
5 GAL TYPE II SAFETY GAS CAN – JUSS10821
• Designed with two
openings, one for pouring,
one for filling
• Pouring opening is
equipped with a flexible
metal hose
construction
BITS, BLADES
& ABRASIVES
5 GAL TYPE II DOT SAFETY GAS CAN –
JUSS10840
POWER TOOLS
CONCRETE & MASONRY
• Meets OSHA and NFPA
requirements
MATERIAL HANDLING
LIGHT EQUIPMENT
GAS CANS
6 GALLON OILY WASTE CAN – JUSS09100
• Flexible hinge, easy to fill,
easy to pour
• 11.875”x15.875”
HAND TOOLS
FUNNEL “STAY-ON” DESIGN – JUSS11202Y
• FM & UL listed
• Fill can without removing
funnel
• Save storage space by
folding funnel down
GAS CANS
WEDCO
PLASTIC GAS CAN – WEDSW520
• 1-1/4 gallon
• 2-1/2 gallon
• 5 gallon
• Patented Versaflex
spout holds its shape
at all pouring angles
• Patented Versaflex
spout holds its shape
at all pouring angles
• Patented Versaflex spout
holds its shape at all
pouring angles
• Fully approved by UL
• Sleek tapered profile
lowers center of gravity
• Rugged “leatherette” type non-slip finish
• Screw-on vent cap with protector tab
• Bottom hand hold
• Molded tab for stopper prevents loss
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Reduce splashes with large rounded bowl
WORKWEAR
265
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
GAS CANS
WEDCO
FLEXIBLE SPOUT – WEDST201C
• Patented Versaflex spout holds
its shape at all pouring angles
GROUP LOCK BOX
GROUP LOCK BOX – MLKS498A
• Captured key storage device for
effective lockout of
large equipment
• Requires each
authorized lockout
team member to place on their personal safety
locks at every lockout point
BITS, BLADES
& ABRASIVES
• Allows for each lockout point to be secured
with just one designated lock
resistance
integrity
LANDSCAPING
HAND TOOLS
LOCKOUT HASPS
HASP – MLKSNO-706
SAFETY LOCKOUT HASP – MLKSNO-420
• 6” hardened steel
body with reinforced plate
• 1” diameter jaws, red
lockout hasp
• Hardened steel staples resist cutting
and sawing
• Each hasp allows for
lockout by up to 6
workers
• Tamper proof hinges help resist prying
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• Hardened steel locking eyes for strong
cut resistance
• Heavy gauge steel
resists prying
266
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
PERSONAL LOCKOUT KIT – MLKS1457V410KA
• Electrical lockout
assortment
• Valve lockout
assortment
• Lightweight safety
lockout carrying case
• Lightweight safety
lockout carrying case
• For individual worker; padlocks supplied are
keyed alike for added worker convenience
• For individual worker; padlocks supplied are
keyed alike for added worker convenience
• Features 410 safety series padlocks, designed
exclusively for OSHA lockout compliance
• Compliance with OSHA “one employee, one
lock, one key” directive
MATERIAL HANDLING
PERSONAL LOCKOUT KIT – MLKS1457E410KA
LIGHT EQUIPMENT
LOCKOUT KITS
CONCRETE & MASONRY
• Durable, lightweight, non-conductive xenoy
lock bodies
• Include permanent write-on labels
• High visibility red locks
• Key retaining-ensures that padlocks are not
left unlocked
LOCKOUT STATIONS – MLKS1483-10
• 4 unit, board only
• 10 unit, board only
• Permanent center
for equipment and
departments
• Permanent center
for equipment and
departments
• High visibility stations facilitate proper and convenient lockouts
• High visibility stations facilitate proper and convenient lockouts
• Compliance with OSHA “one employee, one
lock, one key” directive
HAND TOOLS
BITS, BLADES
& ABRASIVES
LOCKOUT STATIONS – MLKS1482-4
POWER TOOLS
LOCKOUT STATIONS
TAGS
• DANGER-DO
NOT OPERATE
• Heavy-duty tags comply
with OSHA lockout/tagout
standard
• Up to 13 team members
• Heavy-duty steel construction, red
GENERAL SUPPLIES
• Rugged, stain and mildew
resistant styrene material
LANDSCAPING
DO NOT OPERATE ID TAGS – MLKS497A
SAFETY SUPPLIES
WORKWEAR
267
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
HIGHWAY SAFETY
ECONOMY THROW AWAY WARNING FLAGS
SAFETY CONES
SAFETY TRIANGLES – SRMS0100031
• SRMS0102729 – 12” x 12”
w/o staff
• SRMS0100032 – 12”
• Meets FMVSS standards
• SRMS0102896 – 18” x 18”
w/ staff
• SRMS0100355 – 28”
• SRMS0100109 – 18”
• SRMS2058116 – 28”
• SRMS0102951 – 18” x 18”
w/o staff
• Meets NCHRP-350
Category I requirements
• Economy style
• Wide body profile for stability with rugged
black base
• Nail/staple to overhanging load
• No hems or grommets
BITS, BLADES
& ABRASIVES
• Wire bracing will control degree of tilt even in
extreme weather conditions
• Air flow design helps reduce wind resistance
• Flow molded, dayglow red/orange PVC with
white inner liner
HIGHWAY SAFETY
FLASHING BARRICADE LIGHT WITH PHOTO
CELL – WORS707PC
• This light meets all ITE specifications for type A 12 volt flashing warning lights and type C 6
volt steady burning lights
24” BARRICADE – WORSBARRICADE24
• Constructed of 1/2”
outdoor grade plywood
with 1-1/4” x 1-1/4” x 1/8”
steel angle iron legs,
painted white
• Thickest case in the industry
• Damage resistant reputation
• Provides years of service even through severe
climate conditions and abuse
• Encapsulated circuits are weather and moisture resistant
• Solid state design prevents vibration caused
damage
• Orange and white with
engineering grade
reflective sheeting
• 36” high in open position
• 24” wide barricade
• Type I models have 12” top panel and 6”
bottom panel
• Operates on standard 6 volt spring terminal
batteries
• Flash rate: 65 fpm
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
• Constructed of molded
polypropylene plastic
with red acrylic plastic
reflectors
268
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
MUTUAL INDUSTRIES
SILT FENCE – MUTS2130-2X100
SILT FENCE – MUTS2130-3X100
• 5’ 13 gauge steel
• 2’ x 100’
• 3’ x 100’
• Easy to install
• 1-1/2” x 1-1/2”
hardwood stakes
• 1-1/2” x 1-1/2”
hardwood stakes
• Contractor grade
• Contractor grade
UTILITY BARRIERS – CONS-X5968
HEAVY-DUTY DIAMOND FENCE – CONS-X6005
SMOOTH TOP DIAMOND SAFETY FENCE –
CONS-X6040-003
• 4’ x 100’
• 5’ x 50’
• 4’ x 100’
• Magna-designed for medium
duty applications
• Strongest and heaviest fence
of all, providing the ultimate
fencing performance-without
the smooth top design
• Designed to closely match the
look and performance of traditional metal chain-link fences
• Rustproofed by phosphate etching and
feature a green enamel finish
MATERIAL HANDLING
FENCE POST – MUTSPOST
• Each post has a stabilizing anchor plate
• Heavy-duty performance
• Strong and secure
• Outstanding contractor grade product
• Ideal for anywhere restricted access and work
site safety is required
• Reliable, strong & manageable; easy-to-handle
• Contractor grade product
LIGHT BARS & STROBES
ECCO
LIGHT BAR – ECOS5135A
LIGHT BAR – ECOS5135AVM
• Low profile, vacuum
magnet mounted, 15’
straight cord with
cigarette plug
• 15” low profile, evolution, flush mount
• 15” low profile, evolution,
vacuum-magnet mount
• 480 flashes
p/minute
• 480 flashes p/minute
• 160 flashes per minute
• Efficient design combining silicon belt with
stainless steel bearings for longer life
HAND TOOLS
BEACON LIGHT – ECOS5813AVM
• Thread on lens with locking screw
BITS, BLADES
& ABRASIVES
• Temperature resistant from -40 to 200 deg. F
• Both visible and strong, this is an excellent
contractor grade fence product
POWER TOOLS
• Ideal for fencing applications
that require product strength
and durability
CONCRETE & MASONRY
FENCING
• Used frequently as a strong barrier against wind, cold and snow
LIGHT EQUIPMENT
FENCING
• Efficient design combining silicon belt with
stainless steel bearings for longer life
REMOTE LED FLASHER – ECOS3960R
ROTATING HALOGEN LIGHT – ECOS5715AVM
• Non-delay/random
• Non-delay/random
• 12V/DC
• 12V/DC
• Vacuum magnet mounted,
17’ coiled cigarette cord
• Oval, amber lens
• Oval, red lens
• EMI/RFI noise suppression
• Include a 3-pin double seal UBS pigtail
• Include a 3-pin double seal UBS pigtail
• Field replaceable 50 watt
halogen bulb, with no retaining clip
• Lens O-ring seal protects against dust and
moisture
GENERAL SUPPLIES
REMOTE LED FLASHER – ECOS3960A
LANDSCAPING
• Polycarbonate low profile lens
• Polycarbonate low profile lens
• Single parabolic reflector provides highly
visible warning
SAFETY SUPPLIES
• Twist off lens for easy maintenance
WORKWEAR
269
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
LIGHT BARS & STROBES
ECCO
STROBE LIGHT – ECOS6570A
STROBE LIGHT – ECOS6570MGA
STROBE LIGHT – ECOS6550MGA
• Medium profile, flush mount
• Conformal coated circuit board
prevents corrosion
• Medium profile, vacuum
mounted, 15’ straight cord
with cigarette plug
• Low profile, vacuum
mounted, 15’ straight cord
with cigarette plug
• Double flash, field replaceable
flash tube
• Conformal coated circuit board
prevents corrosion
• Conformal coated circuit
board prevents corrosion
• Reverse polarity protected
• Double flash, field replaceable flash tube
• Double flash, field replaceable flash tube
• Seven support points
• UV stabilized polycarbonate thread on lens
• Voltage spike and surge protected
STROBE LIGHT BAR – ECOS5150A
STROBE LIGHT BAR – ECOS5150AVM
STROBE LIGHT BAR – ECOS5150CAA
• 15”, flush mount
• 15”, vacuum-magnet mount
• 15”, flush mount
• Amber dome, amber lenses
• Amber dome, amber lenses
• Dual strobe lights with a fixed center mirror
provide a highly visible warning signal
• Amber dome,
clear lenses
• Efficient microprocessor-based design
• Epoxy encapsulated circuit board for heavyduty protection
• Four wire leads allow user to choose double
or quad flash
• 15’ straight cord with cigarette plug
• Power supply maintains consistent flash intensity during voltage variations
• Four wire leads allow user to choose double
or quad flash
HAND TOOLS
STROBE LIGHT BAR – ECOS5150CAAVM
• 15”, vacuummagnet mount
• Amber dome,
clear lenses
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
270
• 15’ straight cord with cigarette plug
ALARMS
ECCO
BACKUP ALARM – ECOS520
BACKUP ALARM – ECOS530
• 97 dB(A)
• 102 dB(A)
• Compact size and universal mounting bracket
maximize location options
• Compact size and
universal mounting
bracket maximize
location options
• Sealed in epoxy against
dust, moisture and vibration
• Self-grounding: no grounding wire needed
for installation
• Sealed in epoxy against dust, moisture and
vibration
• Steam cleanable and pressure washable
• Self-grounding: no grounding wire needed
for installation
• Steam cleanable and pressure washable
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
LIGHT EQUIPMENT
SIGN POSTS
GREEN ACRYLIC U-CHANNEL SIGN POST
• SSSS03-085 – 8’
MATERIAL HANDLING
• SSSS03-112 – 11’
• Very economical, and is
able to withstand wind
and resist bending
• Meets ASTM A499 standards
CONCRETE & MASONRY
• Easy installation and years of maintenance
free service
• Predrilled and punched on 1 inch centers their
entire length for easy sign installation
• For best results, the post should have a minimum of 1 to 1-1/2 feet of post below ground
DIESEL FUEL – ATISM47P
FIRE EXTINGUISHER – ATISM39R
FLAMMABLE – ATISM16P
• 4” x 12”
• 4” x 20”
• 4” x 12”
• DIESEL FUEL
• FIRE EXTINGUISHER
• FLAMMABLE
POWER TOOLS
DECALS
BITS, BLADES
& ABRASIVES
GASOLINE – ATISM51P
• 4” x 12”
HAND TOOLS
• GASOLINE
SIGNAGE
WIDE LOAD – SRMS0119150
• 18” x 8’
• 18” x 8’
• Bright yellow with
12” black letters
• Bright yellow with
12” black letters
• 5’ rope ties
• 5’ rope ties
LANDSCAPING
OVERSIZE LOAD BANNER – SRMS0109820
STOP/SLOW SIGNS – SSSS02-395B
HANDICAP PARKING – SSSS09-496
• 16” x 14”
• 18” non-reflective
• 12” x 18” non-reflective
• Visible at 500’, effective in
all weather
• Double face stop/slow sing
paddle with 5’ staff
• Each parking space for the
handicapped must be marked
• Gives motorists time to
navigate around slower vehicles
• Slows or stops motorists in
hazardous areas
• Reflective red border around fluorescent
center
• 5’ staff reduces arm fatigue
• Signs are made with ADA/
ANSI A117.1- compliant,
.080 aluminum
• Aluminum with pre-drilled holes
• 8” letters
SAFETY SUPPLIES
SLOW MOVING VEHICLE SIGN – SSSS02-650
GENERAL SUPPLIES
SIGNAGE
• MUTCD mandated for all conditions
WORKWEAR
271
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
SIGNAGE
MEN WORKING SIGN WITH STAND –
SSSSMW-W/STD
• 24” x 24” non-reflective
• This stand is easy to carry
and store
• Single faced 24” x 24”
sign is made of tough
.080 aluminum
SIGNAGE
CONCEALED WEAPON – ATISM452R
DANGER – ATISC392RB
DANGER – ATISD125RB
• 12” x 18”
• 10” x 14”
• 10” x 14”
• Attention carrying firearms
including those under
Missouri’s concealed
weapons law is strictly
prohibited on these premises
• DANGER-HARD HATS
MUST BE WORN BY
ALL PERSONNEL
• DANGER-MEN
WORKING ABOVE
DANGER – ATISD1RB
• 10” x 14”
• 10” x 14”
• 10” x 14”
• DANGER-FLAMMABLE
• DANGERCONSTRUCTION
AREA
• DANGER-blank
• 10” x 14”
• 10” x 14”
• 10” x 14”
• DANGER-CONSTRUCTION
AREA AUTHORIZED
PERSONNEL ONLY
• DANGER-CONSTRUCTION
AREA KEEP OUT
• DANGER-EXPLOSIVE
• 10” x 14”
• 10” x 14”
• 10” x 14”
• DANGER-NO SMOKING,
MATCHES OR OPEN
LIGHTS
• DANGER-HARD
HAT AREA
• DANGER-HIGH
VOLTAGE
• 10” x 14”
• 10” x 14”
• 10” x 14”
• DANGER-KEEP OUT
• DANGER-NO SMOKING
• DANGER-NO
TRESPASSING
DANGER – ATISD9RB
EXIT – ATISM24RB
HAZMAT
• 10” x 14”
• 10” x 14”
• ATISHMS15P – Vinyl
• DANGER-KEEP
OUT AUTHORIZED
PERSONNEL ONLY
• EXIT
• ATISHMS15R – Plastic
• 15” x 15”
• Hazard material sign
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
• White baked enamel, steel legs
272
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
• 10” x 14”
• 10” x 14”
• NO SMOKING
• NOTICE-DO NOT
ENTER CONSTRUCTION
AREA AUTHORIZED
PERSONNEL ONLY
• NOTICE-AUTHORIZED
PERSONNEL ONLY
TUFF EDGE POLYESTER WEB SLINGS
TUFF EDGE POLYESTER WEB SLINGS
WEBMASTER 1600 NYLON SLINGS
• LIFSEE1-801TX3 – Single ply 1” x 3’
• LIFSEE2-802TX10 – Two ply 2” x 10’
• LIFSEE1-801DX3 – Single ply 1” x 3’
• LIFSEE2-802TX20-CE – Two ply 2” x 20’
w/ wear pads
w/ wear pads
SLINGS
w/ wear pads
w/ wear pads
• Red core yarn warning system aids in the
inspection process
• LIFSEE2-802DX8 – Two ply 2” x 8’
• Proven sling web construction
• Polymer coated edge yarns resist cutting and
abrasion to extend sling life
inspection process
• Tuff-tag provides serial numbered identification for traceability
• Tuff-tag provides required OSHA information
for the life of the sling, not just the life of
the tag
• Easy identification-silver body, black edges,
blue center stripe
inspection process
• Yellow treatment for abrasion resistance and
extended sling life
the tag
GENERAL SUPPLIES
• Silver colored web treatment fights abrasion
for additional sling life
LANDSCAPING
w/ wear pads
HAND TOOLS
BITS, BLADES
& ABRASIVES
• 9” x 12”
POWER TOOLS
NOTICE – ATISN34RB
CONCRETE & MASONRY
NOTICE – ATISC135RB
MATERIAL HANDLING
NO SMOKING – ATISFMORB
LIGHT EQUIPMENT
SIGNAGE
• Silver colored web treatment fights abrasion
for additional sling life
SAFETY SUPPLIES
• Polymer coated edge yarns resist cutting and
abrasion to extend sling life
the tag
WORKWEAR
• Easy identification-silver body, black edges,
blue center stripe
273
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SAFETY SUPPLIES
SLINGS
TUFLEX ENDLESS SLINGS
• LIFSEN30X04 – Purple, 30 x 4’
• LIFSEN60X04 – Green, 60 x 4’
• LIFSEN90X06 – Yellow, 90 x 6’
• Synthetic materials won’t cut hands
• Consistent matched lengths for better multiple
sling load control
sling load control
• Low stretch reduces sling and load abrasion
good for low headroom lifts
• Color coding provides positive sling capacity
information
• Soft cover won’t scratch load surface
• Load stability and balance can be achieved by
spreading sling legs
sling load control
information
• Wear points can be shifted to extend sling life
• The most flexible style of sling
information
HAND TOOLS
• LIFSEN150X08 – Red, 150 x 8’
• LIFSEN150X12 – Red, 150 x 12’
• LIFSEN150X16 – Red, 150 x 16’
• LIFSEN150X20 – Red, 150 x 20’
LANDSCAPING
sling load control
information
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
274
Call us at: 8 00-6 6 9-778 8
SAFETY SUPPLIES
SERIES 5,000 RATCHET ASSEMBLY –
LIFS60501
• LIFS60103-10 – 1” x 10’
• LIFS61001 – 2” x 27’
• 2” x 27’
• LIFS60103-15 – 1” x 15’
• LIFS61201 – 4” x 27’
• Polyester webbing
• Nylon webbing
• Polyester webbing
• Flexible, conforms to and controls the load
• Ratchet assembly allows easy adjustment
• All hooks and chain assemblies equal or
exceed strength of webbing
• Soft and wide, does not damage costly cargo
• Lightweight, easy-to-handle
CONCRETE & MASONRY
SERIES 10,000 RATCHET ASSEMBLY
MATERIAL HANDLING
SERIES 1,000 RATCHET ASSEMBLY
LIGHT EQUIPMENT
RATCHETS
POWER TOOLS
BITS, BLADES
& ABRASIVES
HAND TOOLS
LANDSCAPING
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
275
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
NOTES
276
Call us at: 8 00-6 6 9-778 8
WORKWEAR
LIGHT EQUIPMENT
SUMMER APPAREL
ICY BLUE ONES BANDANNA – AASS3009559
• Model DB-801
• Model IB-901C
• Economy price range
• Bandanna style
• Full-size (8-5/8” long)
• Fast, cool relief from heat
MATERIAL HANDLING
DRY-BROW SWEATBAND – AASS3005338
• Tie around neck or forehead
• American flag design
WINTER LINER – AASS22223
• Model AA-101
• Model AA-7
• Model AA-9
• Economy standard
• Cap style
• Wood model
• Full face and neck cap and
hat style
• Red
• Red
• Model AA-9
• Model 165
• Model 325 ultra
• Full face and neck cap and
hat style
• Lightweight protection
• Red
• Napped flannel interior
• Detachable bottom section is
double-layered, heavy knit
spun polyester
• 100% cotton
• Liner color may vary
• Plastic zipper for dielectric protection
BITS, BLADES
& ABRASIVES
POWER TOOLS
DRY-BROW SWEATBAND – AASS3005335
CONCRETE & MASONRY
WINTER APPAREL
• Top section is flame retardant treated; bottom
section does not support combustion
• Red heavyweight fleece inner lining of
top section
• Model 200
• Model 400
• Model 225 plus
• 100% cotton, blue twill
outer shell with black
fastener straps
• Full head and neck coverage
with extra-long nape and
wrap around collar
• Blue quilted nylon whell
with fastener straps
• Red heavyweight fleece lining
• 100% cotton, blue exterior
• Meets 16 CFR 1610M class I
• Three layers of thick foam
LANDSCAPING
HAND TOOLS
• 100% cotton, blue twill exterior with black
fastener suspension strap
• Thick, sherpa lining for maximum warmth
• Model 375
• Long nape offered for
extra neck coverage
from wind
• Thick, sherpa lining for maximum warmth
SAFETY SUPPLIES
• 100% cotton, blue twill
shell with black fastener strap
GENERAL SUPPLIES
WORKWEAR
277
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
FOOTWEAR
BUCKLE ARCTIC BOOTS
HIP BOOT
KNEE BOOTS
• BATS86065-SZ8 – Size 8
• BATS86065-SZ10 – Size 10
• BATS86055-SZ10 – Size 10
• BATS86065-SZ11 – Size 11
• BATS86055-SZ11 – Size 11
• BATS86065-SZ12 – Size 12
• BATS86055-SZ12 – Size 12
• BATS86101-SZ10 – Size 10
• BATS86065-SZ13 – Size 13
• Kick off lug
• BATS86101-SZ11 – Size 11
• BATS86065-SZ14 – Size 14
• Excellent cold weather flex
• BATS86101-SZ12 – Size 12
• BATS86065-SZ15 – Size 15
• Lightweight/durable PVC upper with
polyester backing
• BATS86101-SZ13 – Size 13
• Non-conductive adjustable polyester nylon
strap with plastic snaps
• Non-slip soles for safety
• Premium ozone resistant rubber
• Non-corrosive buckles
• Stretch net linings
• Can be folded or rolled with no cracking
• Self draining gusset
• Resists oil, grease, gasoline, saltwater
and ozone
POWER TOOLS
• Cleated outsole
• Fits over most work shoes and boots
• Plain toe
• Self-cleaning soles clean while walking
• Pull-up and kick off lugs
• Molded-in pant stay
• Individually tested for total waterproof
protection
• Removable, washable cushion insole
3 PIECE ECONOMY RAINSUIT
48” COAT W/ATTACHED HOOD
BIB OVERALL
• BATS74515-SM – SM
• BATS79040-MED – MED
• BATS79040-LG – LG
• BATS79040-XLG – XL
• BATS79052-XL – XL
• BATS79040-XXLG – 2XL
• BATS79052-2XL – 2XL
• BATS74515-2XL – 2XL
• BATS79040-3XL – 3XL
• BATS79052-3XL – 3XL
• BATS74515-3XL – 3XL
• .30 mm material thickness
• .25mm material thickness
• 48” long coat
• Snap fly front
• Reinforced crotch
• Flame retardant
• Flame retardant
• Adjustable waist snaps
• 2 front snap pockets
• Ankle and cuff take ups
KNEE BOOTS
BITS, BLADES
& ABRASIVES
• BATS86102-SZ10 – Size 10
• BATS86102-SZ11 – Size 11
HAND TOOLS
• BATS86102-SZ12 – Size 12
• BATS86102-SZ13 – Size 13
• Steel toe
• Non-slip soles for safety
• Self-cleaning soles clean while walking
• Pull-up and kick off lugs
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
• Molded-in pant stay
278
• Removable, washable cushion insole
RAIN GEAR
• Cuff and ankle take ups
• Reinforced crotch
• Heavy-duty elastic suspender with deluxe suspender clip
• Cape back w/ nylon vent
• Underarm vents
Call us at: 8 00-6 6 9-778 8
WORKWEAR
LIGHT EQUIPMENT
RAIN GEAR
JACKET W/ATTACHED HOOD
• .30 mm
• BATS79034-SM – SM
• Flame retardant
• Drawstring closure
MATERIAL HANDLING
HOOD – BATS79060
• BATS79034-2XL – 2XL
• BATS79034-3XL – 3XL
CONCRETE & MASONRY
• Flame retardant
• Heavy-duty elastic suspender with deluxe
suspender clip
DUCK HOOD WITH KNIT COLLAR –
CARSA08BRN
• Black – one size fits all
• Carhartt brown – one size
fits all
fits all
• 13 oz., firm hand, 100%
cotton duck with plied yarns
• 12 oz., firm hand, 100% cotton duck with plied yarns
• Water-repellent (re-treat
after washing)
after washing)
• Knit headband
• 100% nylon quilted to polyester
mid-weight lining
• 100% polyester quilted flannel
heavyweight lining
• Velcro closure chin strap
• Snap-on mouth protector
• Rib knit collar and headband
• Hood snaps onto most lined garments
• Drawstring adjustment
• Drawstring with cord lock
after washing)
• 100% nylon quilted to polyester arctic weight
lining
ARCTIC HOOD WITHOUT FUR – CARSA02BRN
ACRYLIC WATCH HAT
ALL SEASON-COTTON SOCK
fits all
• CARSA18BLK – Black –
one size fits all
• CARSA62GRY-L – LG, gray
• CARSA18BRN – Carhartt
brown – one size fits all
• CARSA62WHT-L – Large, white
after washing)
• CARSA18HGY – Heather gray
– one size fits all
• 100% nylon quilted to polyester arctic
weight lining
• CARSA18NVY – Navy – one size fits all
• Knit headband
• Velcro closure chin strap
• CARSA18BOG – Bright orange – one size
fits all
• 100% acrylic jersey knit
• CARSA62GRY-XL – XL, gray
• CARSA62WHT-XL – XL, white
• 71%-ring spun cotton/20%stretch nylon/6%-polyester/3%-Lycra spandex
LANDSCAPING
• CARSA18BLM – Bright lime – one size fits all
HAND TOOLS
DUCK HOOD – CARSA04BRN
BITS, BLADES
& ABRASIVES
ARCTIC HOOD WITHOUT FUR – CARSA02BLK
POWER TOOLS
WORKWEAR ACCESSORIES
• Lycra reinforced welt top
• Nylon reinforced reciprocated heel and toe
• Flat toe seam
• Logo label on front
GENERAL SUPPLIES
• Cushioned sole
SAFETY SUPPLIES
WORKWEAR
279
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
WORKWEAR ACCESSORIES
ALL SEASON-STEEL TOE COTTON SOCK
COLD WEATHER-BOOT SOCK
• CARSA63WBN-L – LG,
white/brown
• CARSA66GRY-L – LG, gray
• CARSA63WBN-XL – XL,
white/brown
• CARSA66NVY-L – LG, white
• CARSA66GRY-XL – XL, gray
• CARSA66NVY-XL – XL, white
• CARSA63WGY-L – LG,
white/gray
• 62%-hi bulk acrylic/20%-stretch nylon/17%worsted wool/1%-Lycra spandex
• CARSA63WGY-XL – XL, white/gray
• 66%-combed, ring spun cotton/17%acrylic/125%-stretch nylon/2%-Lycra spandex
• Fully cushioned foot and lower leg
• Cushioned toe, with flat seam, for comfort
when wearing steel toed boots
• Non-terry vamp to reduce bulk
• Flat toe seam
• Cushioned sole
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
BOTTOMS
DENIM RELAXED FIT JEAN SHORT
DENIM RELAXED FIT JEAN SHORT
DENIM WORK SHORT
• CARSB26DST-32 – 32
• CARSB26STW-32 – 32
• Darkstone
• Stonewashed
• 14.75-oz., 100% cotton denim
• 14.75-oz., 100% cotton denim
• Darkstone
• Garment washed for soft hand
• 11.5 oz., or 14.75 oz. 100% cotton denim
• Two front scoop pockets, right front has
coin pocket
• Two front scoop pockets, right front has
coin pocket
• Back yoke, two back patch pockets, Carhartt
leatherette label on right pocket
• Back yoke, two back patch pockets, Carhartt
leatherette label on right pocket
• Zipper fly
• Zipper fly
• Two back patch pockets, Carhartt leather label
on right pocket
• Antique brass logo rivets
• Antique brass logo rivets
• Zipper fly
• 9” inseam
• 9” inseam
• Right leg has double tool pocket, left leg has
hammer loop and ruler pocket
• Two front quarter top pockets at waist, right
front has coin pocket
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
• 8” inseam
280
Call us at: 8 00-6 6 9-778 8
WORKWEAR
WASHED DENIM WORK DUNGAREE
DENIM TRADITIONAL FIT JEAN
DENIM TRADITIONAL FIT JEAN
• CARSB18PRW-30X32 – 30x32
• CARSB18STW-30X30 – 30x30
• CARSB18PRW-30X34 – 30x34
• CARSB18STW-30X34 – 30x34
• CARSB13DST-30X34 – 30x34
• CARSB18PRW-32X30 – 32x30
• CARSB18STW-32X30 – 32x30
• CARSB13DST-31X30 – 31x30
• CARSB18PRW-32X32 – 32x32
• CARSB18STW-32X34 – 32x34
• CARSB13DST-31X32 – 31x32
• CARSB18PRW-32X34 – 32x34
• CARSB18STW-32X36 – 32x36
• CARSB18PRW-32X36 – 32x36
• CARSB18STW-33X34 – 33x34
• CARSB18PRW-34X30 – 34x30
• CARSB18STW-34X30 – 34x30
• CARSB13DST-32X34 – 32x34
• CARSB18PRW-34X32 – 34x32
• CARSB18STW-34X32 – 34x32
• CARSB13DST-33X30 – 33x30
• CARSB18PRW-34X34 – 34x34
• CARSB18STW-34X34 – 34x34
• CARSB13DST-33X32 – 33x32
• CARSB18PRW-34X36 – 34x36
• CARSB18STW-34X36 – 34x36
• CARSB13DST-33X34 – 33x34
• CARSB18PRW-36X30 – 36x30
• CARSB18STW-36X32 – 36x32
• CARSB13DST-34X30 – 34x30
• CARSB18PRW-36X32 – 36x32
• CARSB18STW-36X34 – 36x34
• CARSB13DST-34X32 – 34x32
• CARSB18PRW-36X34 – 36x34
• CARSB18STW-36X36 – 36x36
• CARSB18PRW-36X36 – 36x36
• CARSB18STW-38X30 – 38x30
• CARSB18PRW-38X30 – 38x30
• CARSB18STW-38X32 – 38x32
• CARSB13DST-36X34 – 36x34
• CARSB18PRW-38X32 – 38x32
• CARSB18STW-38X34 – 38x34
• CARSB18PRW-38X34 – 38x34
• CARSB18STW-38X36 – 38x36
• CARSB18PRW-38X36 – 38x36
• CARSB18STW-40X30 – 40x30
• CARSB13DST-38X34 – 38x34
• CARSB18PRW-42X30 – 42x30
• CARSB18STW-40X32 – 40x32
• CARSB13DST-40X32 – 40x32
• CARSB18PRW-44X30 – 44x30
• CARSB18STW-42X30 – 42x30
• CARSB13DST-40X34 – 40x34
• CARSB18PRW-44X32 – 44x32
• CARSB18STW-42X32 – 42x32
• CARSB13DST-42X30 – 42x30
• CARSB18PRW-46X30 – 46x30
• CARSB18STW-44X30 – 44x30
• CARSB13DST-42X32 – 42x32
• CARSB18PRW-46X32 – 46x32
• CARSB18STW-44X32 – 44x32
• CARSB13DST-42X34 – 42x34
• Prewashed
• CARSB18STW-46X30 – 46x30
• 15 oz., 100% cotton denim
• CARSB18STW-46X32 – 46x32
• Sits at the natural waist
• Stonewashed
• CARSB13DST-46X30 – 46x30
• Slim seat and thigh
• CARSB13DST-46X32 – 46x32
• Two reinforced back pockets
• Darkstone
• 15-3/4” tapered leg opening
• Slim seat and thigh
• 15-3/4” tapered leg opening
• Full seat and thigh
• Multiple tool and utility pockets
LANDSCAPING
• 11.75 oz., 100% cotton denim
HAND TOOLS
• CARSB13DST-44X30 – 44x30
• CARSB13DST-44X32 – 44x32
BITS, BLADES
& ABRASIVES
• CARSB13DST-38X30 – 38x30
• CARSB13DST-38X32 – 38x32
POWER TOOLS
• CARSB13DST-34X34 – 34x34
• CARSB13DST-36X32 – 36x32
CONCRETE & MASONRY
• CARSB13DST-32X30 – 32x30
• CARSB13DST-32X32 – 32x32
MATERIAL HANDLING
• CARSB13DST-30X30 – 30x30
• CARSB13DST-30X32 – 30x32
LIGHT EQUIPMENT
BOTTOMS
• Hammer loop
• 19” leg opening fits over work boot
GENERAL SUPPLIES
SAFETY SUPPLIES
WORKWEAR
281
BOTTOMS
LOOSE FIT JEAN
RELAXED FIT JEAN-STRAIGHT LEG
RELAXED FIT CARPENTER JEAN
• CARSB167DST-30X30 – 30x30
• CARSB170DST-30X32 – 30x32
• CARSB171DST-30X30 – 30x30
• CARSB167DST-30X32 – 30x32
• CARSB170DST-30X34 – 30x34
• CARSB171DST-30X32 – 30x32
• CARSB167DST-30X34 – 30x34
• CARSB170DST-31X30 – 31x30
• CARSB171DST-31X30 – 31x30
• CARSB167DST-31X30 – 31x30
• CARSB170DST-31X32 – 31x32
• CARSB171DST-31X32 – 31x32
• CARSB167DST-31X32 – 31x32
• CARSB170DST-32X30 – 32x30
• CARSB171DST-32X30 – 32x30
• CARSB167DST-32X30 – 32x30
• CARSB170DST-32X32 – 32x32
• CARSB171DST-32X32 – 32x32
• CARSB167DST-32X32 – 32x32
• CARSB170DST-32X34 – 32x34
• CARSB171DST-32X34 – 32x34
• CARSB167DST-32X34 – 32x34
• CARSB170DST-33X30 – 33x30
• CARSB171DST-33X30 – 33x30
• CARSB167DST-32X36 – 32x36
• CARSB170DST-33X32 – 33x32
• CARSB171DST-33X32 – 33x32
• CARSB171DST-33X34 – 33x34
• CARSB167DST-33X30 – 33x30
• CARSB170DST-30X34 – 33x34
• CARSB167DST-33X32 – 33x32
• CARSB170DST-34X30 – 34x30
• CARSB171DST-34X30 – 34x30
• CARSB167DST-33X34 – 33x34
• CARSB170DST-34X32 – 34x32
• CARSB171DST-34X32 – 34x32
• CARSB167DST-34X30 – 34x30
• CARSB170DST-34X34 – 34x34
• CARSB171DST-34X34 – 34x34
• CARSB167DST-34X32 – 34x32
• CARSB170DST-34X36 – 34x36
• CARSB171DST-34X36 – 34x36
• CARSB167DST-34X34 – 34x34
• CARSB170DST-36X30 – 36x30
• CARSB171DST-36X30 – 36x30
• CARSB167DST-34X36 – 34x36
• CARSB170DST-36X32 – 36x32
• CARSB171DST-36X32 – 36x32
• CARSB167DST-36X30 – 36x30
• CARSB170DST-36X34 – 36x34
• CARSB171DST-36X34 – 36x34
• CARSB167DST-36X32 – 36x32
• CARSB170DST-38X30 – 38x30
• CARSB171DST-38X30 – 38x30
• CARSB167DST-36X34 – 36x34
• CARSB170DST-38X32 – 38x32
• CARSB171DST-38X32 – 38x32
• CARSB167DST-38X30 – 38x30
• CARSB170DST-38X34 – 38x34
• CARSB171DST-38X34 – 38x34
• CARSB171DST-40X30 – 40x30
• CARSB167DST-38X32 – 38x32
• CARSB170DST-40X30 – 40x30
• CARSB167DST-38X34 – 38x34
• CARSB170DST-40X32 – 40x32
• CARSB171DST-40X32 – 40x32
• CARSB167DST-40X30 – 40x30
• CARSB170DST-40X34 – 40x34
• CARSB171DST-40X34 – 40x34
• CARSB167DST-40X32 – 40x32
• CARSB170DST-42X30 – 42x30
• CARSB171DST-42X30 – 42x30
• CARSB167DST-40X34 – 40x34
• CARSB170DST-42X32 – 42x32
• CARSB171DST-42X32 – 42x32
• CARSB167DST-42X30 – 42x30
• CARSB170DST-42X34 – 42x34
• CARSB171DST-42X34 – 42x34
• CARSB167DST-42X32 – 42x32
• CARSB170DST-44X30 – 44x30
• CARSB171DST-44X30 – 44x30
• CARSB167DST-42X34 – 42x34
• CARSB170DST-44X32 – 44x32
• CARSB171DST-44X32 – 44x32
• CARSB167DST-44X30 – 44x30
• CARSB170DST-46X30 – 46x30
• CARSB171DST-46X30 – 46x30
• CARSB167DST-44X32 – 44x32
• CARSB170DST-46X32 – 46x32
• CARSB171DST-46X32 – 46x32
• CARSB167DST-46X30 – 46x30
• Darkstone
• Darkstone
• CARSB167DST-46X32 – 46x32
• Darkstone
• Relaxed seat and thigh
• Relaxed seat and thigh
• Sits slightly below the natural waist
• Triple stitched main seams
• Loose seat and thigh
• 17-1/2” leg opening fits over work boot
• Double hammer loops, cell phone pocket,
ruler pocket
• 19” leg openings fits over work boots
• 17-1/2” leg opening fits over work boot
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
282
Call us at: 8 00-6 6 9-778 8
WORKWEAR
• CARSR03BRN-32X30 – 32x30
• CARSR03BLK-32X32 – 32x32
• CARSR03BRN-32X32 – 32x32
• CARSR02BRN-32X34 – 32x34
• CARSR03BLK-34X30 – 34x30
• CARSR03BRN-32X34 – 32x34
• CARSR02BRN-32X36 – 32x36
• CARSR03BLK-34X32 – 34x32
• CARSR03BRN-34X30 – 34x30
• CARSR02BRN-34X30 – 34x30
• CARSR03BLK-34X34 – 34x34
• CARSR03BRN-34X32 – 34x32
• CARSR02BRN-34X32 – 34x32
• CARSR03BLK-36X30 – 36x30
• CARSR03BRN-34X34 – 34x34
• CARSR02BRN-34X34 – 34x34
• CARSR03BLK-36X32 – 36x32
• CARSR03BRN-34X36 – 34x36
• CARSR02BRN-34X36 – 34x36
• CARSR03BLK-36X34 – 36x34
• CARSR03BRN-36X30 – 36x30
• CARSR02BRN-36X30 – 36x30
• CARSR03BLK-36X36 – 36x36
• CARSR03BRN-36X32 – 36x32
• CARSR02BRN-36X32 – 36x32
• CARSR03BLK-38X30 – 38x30
• CARSR03BRN-36X34 – 36x34
• CARSR02BRN-36X34 – 36x34
• CARSR03BLK-38X32 – 38x32
• CARSR03BRN-36X36 – 36x36
• CARSR02BRN-38X30 – 38x30
• CARSR03BLK-38X34 – 38x34
• CARSR03BRN-38X30 – 38x30
• CARSR02BRN-38X32 – 38x32
• CARSR03BLK-40X30 – 40x30
• CARSR03BRN-38X32 – 38x32
• CARSR02BRN-38X34 – 38x34
• CARSR03BLK-40X32 – 40x32
• CARSR03BRN-38X34 – 38x34
• CARSR02BRN-38X36 – 38x36
• CARSR03BLK-40X34 – 40x34
• CARSR03BRN-40X30 – 40x30
• CARSR02BRN-40X32 – 40x32
• CARSR03BLK-42X30 – 42x30
• CARSR03BRN-40X32 – 40x32
• CARSR02BRN-40X34 – 40x34
• CARSR03BLK-42X32 – 42x32
• CARSR03BRN-40X34 – 40x34
• CARSR02BRN-40X36 – 40x36
• CARSR03BLK-44X30 – 44x30
• CARSR03BRN-40X36 – 40x36
• CARSR02BRN-42X30 – 42x30
• CARSR03BLK-44X32 – 44x32
• CARSR03BRN-42X30 – 42x30
• CARSR02BRN-42X32 – 42x32
• CARSR03BLK-46X30 – 46x30
• CARSR03BRN-42X32 – 42x32
• CARSR02BRN-42X34 – 42x34
• CARSR03BLK-46X32 – 46x32
• CARSR03BRN-42X34 – 42x34
• CARSR02BRN-42X36 – 42x36
• CARSR03BLK-48X30 – 48x30
• CARSR03BRN-44X30 – 44x30
• CARSR02BRN-44X30 – 44x30
• CARSR03BLK-48X32 – 48x32
• CARSR03BRN-44X32 – 44x32
• CARSR02BRN-44X32 – 44x32
• CARSR03BLK-50X30 – 50x30
• CARSR03BRN-44X34 – 44x34
• CARSR02BRN-44X34 – 44x34
• CARSR03BLK-50X32 – 50x32
• CARSR03BRN-46X30 – 46x30
• CARSR02BRN-46X30 – 46x30
• Black
• CARSR03BRN-46X32 – 46x32
• CARSR02BRN-46X34 – 46x34
• CARSR03BRN-46X34 – 46x34
• CARSR02BRN-48X30 – 48x30
• 12 oz., firm hand, 100% ring spun
cotton duck
• CARSR02BRN-48X32 – 48x32
• Zipper fly
• CARSR03BRN-48X32 – 48x32
• CARSR02BRN-48X34 – 48x34
weight lining
• CARSR03BRN-50X30 – 50x30
• CARSR02BRN-50X32 – 50x32
• CARSR02BRN-50X34 – 50x34
• CARSR02BRN-52X30 – 52x30
• Hammer loop
• Leg zippers open to knee with protective
wind flap
• CARSR03BRN-48X30 – 48x30
• CARSR03BRN-50X32 – 50x32
• Brown
cotton duck
• Zipper fly
• CARSR02BRN-54X30 – 54x30
weight lining
• CARSR02BRN-54X32 – 54x32
• Carhartt brown
cotton duck
• Hammer loop
wind flap
mid-weight lining
• Hammer loop
SAFETY SUPPLIES
• Zipper fly
GENERAL SUPPLIES
• CARSR02BRN-52X32 – 52x32
LANDSCAPING
• CARSR02BRN-50X30 – 50x30
HAND TOOLS
• CARSR03BLK-32X30 – 32x30
• CARSR02BRN-32X32 – 32x32
BITS, BLADES
& ABRASIVES
• CARSR02BRN-32X30 – 32x30
POWER TOOLS
ARCTIC QUILT LINED DUCK BIB OVERALL
CONCRETE & MASONRY
ARCTIC QUILT LINED DUCK BIB OVERALL
MATERIAL HANDLING
QUILT LINED DUCK BIB OVERALL
LIGHT EQUIPMENT
OVERALLS
wind flap
WORKWEAR
283
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
OVERALLS
DUCK ZIP-TO-THIGH UNLINED BIB OVERALL
DUCK ZIP-TO-THIGH UNLINED BIB OVERALL
DUCK ZIP TO WAIST QUILT LINED BIBERALL
• CARSR37BLK-30X30 – 30x30
• CARSR37BRN-30X30 – 30x30
• CARSR38BRN-32X30 – 32x30
• CARSR37BLK-30X32 – 30x32
• CARSR37BRN-30X32 – 30x32
• CARSR38BRN-32X32 – 32x32
• CARSR37BLK-32X30 – 32x30
• CARSR37BRN-32X30 – 32x30
• CARSR38BRN-34X30 – 34x30
• CARSR37BLK-32X32 – 32x32
• CARSR37BRN-32X32 – 32x32
• CARSR38BRN-34X32 – 34x32
• CARSR37BLK-32X34 – 32x34
• CARSR37BRN-32X34 – 32x34
• CARSR38BRN-34X34 – 34x34
• CARSR37BLK-32X36 – 32x36
• CARSR37BRN-32X36 – 32x36
• CARSR38BRN-34X36 – 34x36
• CARSR37BLK-34X30 – 34x30
• CARSR37BRN-34X30 – 34x30
• CARSR38BRN-36X30 – 36x30
• CARSR37BLK-34X32 – 34x32
• CARSR37BRN-34X32 – 34x32
• CARSR38BRN-36X32 – 36x32
• CARSR37BLK-34X34 – 34x34
• CARSR37BRN-34X34 – 34x34
• CARSR38BRN-36X34 – 36x34
• CARSR37BLK-34X36 – 34x36
• CARSR37BRN-34X36 – 34x36
• CARSR38BRN-38X30 – 38x30
• CARSR37BLK-36X30 – 36x30
• CARSR37BRN-36X30 – 36x30
• CARSR38BRN-38X32 – 38x32
• CARSR37BLK-36X32 – 36x32
• CARSR37BRN-36X32 – 36x32
• CARSR38BRN-38X34 – 38x34
• CARSR37BLK-36X34 – 36x34
• CARSR37BRN-36X34 – 36x34
• CARSR38BRN-40X30 – 40x30
• CARSR37BLK-36X36 – 36x36
• CARSR37BRN-36X36 – 36x36
• CARSR38BRN-40X32 – 40x32
• CARSR37BLK-38X30 – 38x30
• CARSR37BRN-38X30 – 38x30
• CARSR38BRN-40X34 – 40x34
• CARSR37BLK-38X32 – 38x32
• CARSR37BRN-38X32 – 38x32
• CARSR38BRN-42X30 – 42x30
• CARSR37BLK-38X34 – 38x34
• CARSR37BRN-38X34 – 38x34
• CARSR38BRN-42X32 – 42x32
• CARSR37BLK-38X36 – 38x36
• CARSR37BRN-38X36 – 38x36
• CARSR38BRN-42X34 – 42x34
• CARSR37BLK-40X30 – 40x30
• CARSR37BRN-40X30 – 40x30
• CARSR38BRN-44X30 – 44x30
• CARSR37BLK-40X32 – 40x32
• CARSR37BRN-40X32 – 40x32
• CARSR38BRN-44X32 – 44x32
• CARSR37BLK-40X34 – 40x34
• CARSR37BRN-40X34 – 40x34
• CARSR38BRN-44X34 – 44x34
• CARSR37BLK-40X36 – 40x36
• CARSR37BRN-40X36 – 40x36
• CARSR38BRN-46X30 – 46x30
• CARSR37BLK-42X30 – 42x30
• CARSR37BRN-42X30 – 42x30
• CARSR38BRN-46X32 – 46x32
• CARSR37BLK-42X32 – 42x32
• CARSR37BRN-42X32 – 42x32
• CARSR38BRN-46X34 – 46x34
• CARSR37BLK-42X34 – 42x34
• CARSR37BRN-42X34 – 42x34
• CARSR38BRN-48X30 – 48x30
• CARSR37BLK-42X36 – 42x36
• CARSR37BRN-42X36 – 42x36
• CARSR38BRN-48X32 – 48x32
• CARSR37BLK-44X30 – 44x30
• CARSR37BRN-44X30 – 44x30
• CARSR38BRN-48X34 – 48x34
• CARSR37BLK-44X32 – 44x32
• CARSR37BRN-44X32 – 44x32
• CARSR38BRN-50X30 – 50x30
• CARSR37BLK-44X34 – 44x34
• CARSR37BRN-44X34 – 44x34
• CARSR38BRN-50X32 – 50x32
• CARSR37BLK-44X36 – 44x36
• CARSR37BRN-44X36 – 44x36
• Carhartt brown
• CARSR37BLK-46X30 – 46x30
• CARSR37BRN-46X30 – 46x30
• CARSR37BLK-46X32 – 46x32
• Carhartt brown
cotton duck
• CARSR37BLK-46X34 – 46x34
• Black
cotton duck
mid-weight lining
cotton duck
• Right and left legs have hammer loops and
ruler pockets
• Right and left legs have hammer loop and
ruler pockets
• Right and left legs have hammer loops and
ruler pockets
• Chap style double front with cleanout bottom
that can accommodate knee pads
• Zipper front with wind flap and snap closure at
top of bib and waistband
• Chap style double front with cleanout bottom
that can accommodate knee pads
• Zip to thigh leg zippers for easy on/off
• Leg zippers open to hip with protective wind
flap and snap closure
• Reinforced back pockets
• Reinforced back pockets
WORKWEAR
SAFETY SUPPLIES
• Zip to thigh leg zippers for easy on/off
284
Call us at: 8 00-6 6 9-778 8
WORKWEAR
WORKWEAR POCKET T-SHIRT
• CARSK87CHR-MED – MED
• CARSK87HGY-MED – MED
• CARSK87ORG-MED – MED
• CARSK87CHR-LG – LG
• CARSK87HGY-LG – LG
• CARSK87ORG-LG – LG
• CARSK87CHR-XL – XL
• CARSK87HGY-XL – XL
• CARSK87ORG-XL – XL
• CARSK87CHR-2XL – 2XL
• CARSK87HGY-2XL – 2XL
• CARSK87ORG-2XL – 2XL
• Charcoal
• Heather gray
• Orange
• 6.75 oz., 100% cotton
• 6.75 oz., 100% cotton
• 6.75 oz., 100% cotton
• Rib knit crew neck
• Side seamed construction to minimize twisting
• Left chest pocket with logo label
• CARSK87RYL-MED – MED
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
SHIRTS
• CARSK87RYL-LG – LG
• Royal blue
• 6.75 oz., 100% cotton
POWER TOOLS
• CARSK87RYL-XL – XL
• CARSK87RYL-2XL – 2XL
COATS
BITS, BLADES
& ABRASIVES
ARCTIC TRADITIONAL DUCK COAT
• CARSC03BRN-42 – 42
HAND TOOLS
• CARSC03BRN-42T – 42 tall
LANDSCAPING
GENERAL SUPPLIES
• 12 oz., firm hand, 100% ring spun cotton duck
• Nylon lining quilted to arctic weight
polyester insulation
SAFETY SUPPLIES
• Brown
• Corduroy top collar with snaps under collar
for optional hood
• Two inside pockets
WORKWEAR
• Additional features: triple stitched main
seams, split back with bi-swing, pleated
elbow, rib knit storm cuff in sleeve
285
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
JACKETS
SANDSTONE DUCK QUILTED FLANNEL LINED
ACTIVE JACKET
ACTIVE JACKET
ACTIVE JACKET
• CARSJ130BRN-L – LG
• CARSJ130CLY-L – LG
• CARSJ130MOS-L – LG
• CARSJ130BRN-LT – LG tall
• CARSJ130CLY-LT – LG tall
• CARSJ130MOS-LT – LG tall
• CARSJ130BRN-XL – XL
• CARSJ130CLY-XL – XL
• CARSJ130MOS-XL – XL
• CARSJ130BRN-XLT – XL tall
• CARSJ130CLY-XLT – XL tall
• CARSJ130MOS-XLT – XL tall
• CARSJ130BRN-2X – 2X
• CARSJ130CLY-2X – 2X
• CARSJ130MOS-2X – 2X
• CARSJ130BRN-2XT – 2X tall
• CARSJ130CLY-2XT – 2X tall
• CARSJ130MOS-2XT – 2X tall
• Carhartt brown
• Clay
• Moss
• 12 oz., firm hand, 100% cotton sandstone duck
• 12 oz.,firm hand, 100% cotton sandstone duck
• Quilted flannel lining in body, quilted nylon
lining in sleeves
• Quilted flannel lining in body, quilted nylon lining in sleeves
• Attached three-piece hood
ACTIVE JACKET
DUCK THERMAL LINED ACTIVE JACKET
• CARSJ130SPC-L – LG
• CARSJ131BLK-L – LG
• CARSJ130SPC-LT – LG tall
• CARSJ131BLK-XL – XL
• CARSJ130SPC-XL – XL
• CARSJ131BLK-XLT – XL tall
• CARSJ130SPC-XLT – XL tall
• CARSJ131BLK-2X – 2X
• CARSJ130SPC-2X – 2X
• CARSJ131BLK-2XT – 2X tall
• CARSJ130SPC-2XT – 2X Tall
• Spruce
• Black
• 12 oz., 100% ring spun cotton duck
• 100% polyester thermal lining
• Carhartt brown
• Attached thermal lined three-piece hood
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
286
DUCK QUILTED FLANNEL LINED
ACTIVE JACKET
ACTIVE JACKET
• CARSJ131DNY-L – LG
• CARSJ140BLK-L – LG
• CARSJ131DNY-XL – XL
• CARSJ140BLK-LT – LG tall
• CARSJ131DNY-XLT – XL tall
• CARSJ140BLK-XL – XL
• CARSJ131DNY-2X – 2X
• CARSJ140BLK-XLT – XL tall
• CARSJ131DNY-2XT – 2X Tall
• Dark navy
• Black
• Carhartt brown
Call us at: 8 00-6 6 9-778 8
WORKWEAR
WORKCAMO ACTIVE JACK THERMAL LINED –
CARSJ144CMO-
• CARSJ140DNY-L – LG
• Realtree hardwoods HD
camouflage
• Realtree hardwoods HD
camouflage
ring spun cotton duck
ring spun cotton duck
• Brush polyester lining
quilted to polyester insulation in body and hood
• Micro sanded for soft finish
• Nylon lining quilted to polyester insulation
in sleeve
• Attached thermal lined three-piece hood with
adjustable tipped draw cord
• Front hand warmer pockets and two interior
pockets, zipper closure on right side and hook
and loop closure on left side
• Front hand warmer pockets and two interior
pockets, zipper closure on right side and hook
and loop closure on left side
• Attached quilted flannel lined three-piece hood
with adjustable tipped draw cord
• Zipper front, rib knit cuffs and bottom band,
triple stitched main seams, hanger loop
• CARSJ140DNY-LT – LG tall
• CARSJ140DNY-XL – XL
• CARSJ140DNY-XLT – XL tall
• CARSJ140DNY-2XT – 2X tall
• CARSJ140DNY-3XT – 3X tall
• Dark navy
• Zipper front, rib knit cuffs and bottom band,
triple stitched main seams, hanger loop
POWER TOOLS
• 100% polyester thermal
lining for warmth
GLOVES
MIDWEST GLOVE
• Nap-in cotton canvas glove
• MIWS7792-6 – Pack of six
• Straight thumb
• Straight thumb
• Men’s brown jersey glove
• Gunn cut
• Clute cut
• Straight thumb
• Red knit cuff
• Open cuff and red cotton lining
CANVAS GLOVE - MIWS7103
CHORE GLOVE – MIWS2201
DISPOSABLE GLOVES – MIWS770
• White cotton canvas glove
with black plastic dots on
forefinger, thumb and palm
• Yellow cotton fleece outside
• Disposable light-duty
unsupported
vinyl gloves
• Clute cut
• Knit cuff
• Lined and bonded
• Straight thumb
• Clute cut
• Clute cut
• Resists solvents, caustics,
light oils, salts, grease, soaps, detergents
and dyes
• Gunn cut
• Taped cuff with gathered
elastic for a snug fit
• Resists most
household chemicals
• Excellent for painting, refinishing and general
purpose cleaning
GLOVE LINER – MIWS98T
GRIPPING GLOVE – MIWS63NFW
• Bag of 10
• 100% cotton glove liner
• Disposable light-duty
unsupported vinyl gloves
• Thermal waffle weave knit
for warmth
• Crinkle finish rubber
coating, cotton
jersey lined
• Resists most household
chemicals
• Straight thumb
• Features 410 Safety
Series padlocks, designed
exclusively for OSHA
lockout compliance
• Breathable 3/4
cotton back
• Wing thumb
SAFETY SUPPLIES
DISPOSABLE GLOVES – MIWS770-10
GENERAL SUPPLIES
• Excellent for painting, refinishing and general
purpose cleaning
LANDSCAPING
CANVAS GLOVE – MIWS10E
• Brown jersey slip-on glove
HAND TOOLS
BROWN JERSEY LINED GLOVE – MIWS14LJ
• MIWS7792 – Single pair
BITS, BLADES
& ABRASIVES
BROWN JERSEY GLOVE
• Straight thumb
CONCRETE & MASONRY
WORKCAMO ACTIVE JAC QUILTED FLANNEL
LINED – CARSJ143CMO-
MATERIAL HANDLING
ACTIVE JACKET
LIGHT EQUIPMENT
JACKETS
• Durable, lightweight, non-conductive Xenoy
lock bodies
• Includes permanent write-on labels
• Key retaining-ensures that padlocks are not
left unlocked
WORKWEAR
• High visibility red locks
287
GLOVES
MIDWEST GLOVE
GRIPPING GLOVE – MIWS66
LEATHER PALM GLOVE-LIGHTWEIGHT –
MIWS7731
LEATHER PALM GLOVE-MEDIUM WEIGHT –
MIWS7734
• Knit glove with a textured
rubber coating on palm
and fingertips
• Lightweight suede
cowhide, striped
cotton back
• Medium weight
suede cowhide,
striped cotton back
• Knit wrist to keep dirt out
• Wing thumb
• Wing thumb
• Gunn cut
• Gunn cut
• Leather index finger, fingertips and knuckle strap
• Safety cuff
• Safety cuff and gathered elastic for a snug fit
LINED LEATHER GLOVE
LINED LEATHER GLOVE
LINED LEATHER GLOVE
• MIWS430PL-MED – MED
• MIWS608T-MED – MED
• MIWS609V-LG – LG
• MIWS430PL-LG – LG
• MIWS608T-LG – LG
• MIWS609V-XL – XL
• MIWS430PL-XL – XL
• MIWS608T-XL – XL
• Acrylic pile lined russet suede
cowhide glove
• Thermal lined, smooth
grain cowhide
• Vellux lined, smooth
grain leather
• Straight thumb
• Straight thumb
• Gunn cut
• Gunn cut
• Gunn cut
• Taped cuff with gathered elastic for a snug fit
• Self-hemmed cuff and gathered elastic for a
snug fit
LINED LEATHER PALM GLOVE – MIWS7750TH
LINED LEATHER PALM GLOVE –
MIWS7750THB
NEOPRENE GLOVE – MIWS6780
• LG
• Woman’s glove
• Suede cowhide leather
palm glove with
Thinsulate insulation
• Suede cowhide leather
palm glove with
Thinsulate Insulation
• Full leather index finger,
fingertips and knuckle strap
• Full leather index finger,
fingertips and knuckle strap
• Safety cuff
• Knit cuff
• Keystone thumb
• Neoprene coated, interlock
cotton lined
• Set-in wing thumb with 12”
gauntlet cuff
• Protects against cuts, abrasions, oil, sunlight, greases,
chemicals, acids and caustics
• Resists solvents, caustics, light oils, salts,
grease, soaps, detergents and dyes
NITRILE CHEMICAL GLOVE
RED PVC COATED GLOVE – MIWS710
RED PVC COATED GLOVE – MIWS712
• MIWS771-MED – MED
• Red PVC coated, cotton
jersey lined
• Red PVC coated, cotton
jersey lined
• Medium-duty unsupported nitrile,
flock lined, 13” gauntlet cuff
• Smooth non-slip finish
• Smooth non-slip finish
• Wing thumb
• Wing thumb
• Resists many yard, garden and
farm chemicals including ammonia, caustics, fertilizers and herbicides
• Black knit cuff
• 12” gauntlet cuff
• MIWS771-LG – LG
• Leather index finger, fingertips and
knuckle strap
• Safety cuff and shirred elastic strap for a
snug fit
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
288
Call us at: 8 00-6 6 9-778 8
WORKWEAR
MIDWEST GLOVE
UNLINED LEATHER GLOVE
• MIWS432-M – MED
• MIWS608-SM – SM
• MIWS609-M – MED
• MIWS432-L – LG
• MIWS608-MED – MED
• MIWS609-L – LG
• Brushed suede cowhide
• MIWS608-LG – LG
• MIWS609-XL – XL
• Straight thumb
• MIWS608-XL – XL
• Smooth grain leather
• Gunn cut
• Smooth grain cowhide
• Keystone thumb
• Taped cuff with gathered
elastic for a snug fit
• Straight thumb
• Gunn cut
• Gunn cut
• Self-hemmed cuff and gathered elastic for a
snug fit
WATERPROOF COLD WEATHER HIGH DEXTERITY FLEX GRIP GLOVES
BOXER WORK GLOVES
PRO FRAMER WORK GLOVES
• CLCS135-MED – MED
• CLCS135-LG – LG
• CLCS140-LGE – LG
• CLCS135-XL – XL
• Applications: warehouse, transportation,
material/box handling,
parcel delivery, low abrasive applications
• Applications: carpentry, framing, roofing,
assembly, material
handling, tool use, etc.
• Clarino synthetic leather, tough, soft
and washable
• Clarino synthetic leather, tough, soft and
washable
• Neoprene knuckle and wrist cuff provides
padding and keeps debris out
• Stretch spandex and lycra for better dexterity
and fit
and fit
• Terry cloth to remove sweat
• Tacky pattern for a firm non-slip grip
• Textured grip palm pads for better grip
and wear
YELLOW PVC COATED GLOVE – MIWS765-LG
• Safety yellow PVC coated,
jersey lined
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
GLOVES
• Wing thumb, non-skid finish with 12” gauntlet cuff
POWER TOOLS
• Resists destructive solvents, caustics, light oils,
salts, greases, soaps,
detergents and dyes
• Flexible neoprene wrist cuff keeps debris out
• Synthetic leather, tough, soft and comfortable
to wear, resists shrinking, stretching, and
hardening
• Wing closing wrist strap for perfect fit
• Thumb-spot designed for better flexibility
• Terry cloth to remove sweat or debris
from face
GENERAL SUPPLIES
• Waterproof, windproof, breathable HIPORS PU
membrane liner protects from outside dampness but allows the moisture from your body
to go out, keeping hands warm, dry and comfortable
LANDSCAPING
• TPR wing closing wrist strap for perfect
adjustments
HAND TOOLS
• Waterproof, windproof
gloves designed for
professional uses like: cold storage, snow
and ice removal, equipment and tool use in
winter weather
BITS, BLADES
& ABRASIVES
GLOVES
• Lycra side panels for improved dexterity
SAFETY SUPPLIES
• Neoprene knuckle provides padding
against bumps
WORKWEAR
289
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
WORKWEAR
GLOVES
SAFETY TRADESMAN WORK GLOVES
TRADESMAN WORK GLOVES
• CLCS145-LG – LG
• Applications: demolition, roofing, traffic
control, tool use,
highway maintenance/construction, etc.
• Applications: carpentry, demolition, roofing, ranching, farming,
material handling,
electrical/HVAC, etc.
• Clarino synthetic leather, tough, soft and
washable
• Clarino synthetic leather, tough, soft
and washable
and fit
and fit
• Textured grip palm pads for better grip and
wear
• Textured grip palm pads for better grip
and wear
KNEE PADS
PROFESSIONAL GEL KNEEPADS – CLCSG340
PROFESSIONAL ULTRA FLEX GEL KNEEPADS –
CLCSG361
• Special CLC “comfort zone”
gel center provides maximum cushioning for all
day wearability
• Special CLC “comfort
zone” gel center provides
maximum cushioning for
all day wearability
• Crafted from 1680D ballistic nylon and 3/4” foam for
increased comfort
• Super accordion, ultra-flex
construction for comfort
and protection
• Two strap fastening for added stability
• Durable rubber straps for added stability
• Breathable Neoprene lower straps secure
below the knee for comfort all day long
• Maximum memory foam layer under gel center for greater comfort
• Large, low profile cap designed to prevent
“roll-over” onto hard surfaces
• Soft, flexible outer shell protects and grips
most surfaces without scratching or scuffing
• Elastic upper straps with “buckle-style” fasteners for rapid fit
• One size fits all
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
• Reflective logo
290
Call us at: 8 00-6 6 9-778 8
WORKWEAR
12 POCKET CONSTRUCTION WORK APRON –
CLCS175274
• Double gussets keep front pockets wide open
for easy access
• Made of double layered
600D polyester fabric
• Blue
• Completely adjustable,
padded suspenders engineered to hold and distribute weight comfortably
• Heavy-duty clips on front
and rear
• Easy carry handle design provides for simple
adjustments and easy storage without
spilling contents
• Elastic rear straps for added comfort
• Adjustable to fit all sizes
• 2” wide heavy-duty elastic straps
• Nylon stitched for durability
• One size fits most
RULER HEAVY-DUTY ELASTIC SUSPENDERS –
CLCS110RUL
• Designed to transfer
weight from waist to
shoulders
• Yellow w/ ruler
• Fully adjustable
length, front and
back to fit all sizes
• Heavy-duty padding for user comfort
• Heavy-duty nylon web for extra strength
• Adjustable to fit all sizes
• Heavy-duty clips on front
and rear
• 2” wide heavy-duty
elastic straps
• Nylon stitched for durability
• The large cell phone holder. You
can hang-strap-clip onto work
belts, web suspenders, pants etc.
• Holds most brands of large
cell phones
• Heavy-duty clip on back and
padded inside to protect cell phones
• Elastic side pockets for pens, pencils, small
tools, etc.
CELL PHONE HOLDER – CLCS5124
• Specially designed to securely hold
newer and smaller cell phones
BITS, BLADES
& ABRASIVES
• Convenient quick fastening system
LARGE CELL PHONE HOLDER – CLCS5127
POWER TOOLS
PADDED CONSTRUCTION SUSPENDERS –
CLCS5122
CONCRETE & MASONRY
• 2-1/2” cotton web belt with roller buckle fits
waist sizes 29”-49”
HEAVY-DUTY WORK SUSPENDERS –
CLCS110BLU
MATERIAL HANDLING
• Made of heavy-duty top grain leather
23 POCKET 5 PIECE COMFORTLIFT COMBO
SYSTEM – CLCS1614
LIGHT EQUIPMENT
PERSONAL WORKWEAR
• Versatile 2 way attachment for
belts, pants, etc.
HAND TOOLS
• Heavy-duty clip on back, elastic
side panels and padded inside to
protect cell phones
WORK BELTS
WORK BELT – CLCSC501
• Embossed top grain leather
• Heavy-duty cotton web
• Steel tongue buckle
• Trim to fit waist sizes 29”-46”
• Army pistol type construction
• Trim to fit waist sizes 29”-46”
• Steel, single tongue roller buckle
• Fits waist sizes 29”-46”
GENERAL SUPPLIES
2” EMBOSSED LEATHER WORK BELT –
CLCSE4521
LANDSCAPING
1-3/4” LEATHER WORK BELT – CLCSE4501
SAFETY SUPPLIES
WORKWEAR
291
WORKWEAR
SAFETY SUPPLIES
GENERAL SUPPLIES
LANDSCAPING
HAND TOOLS
BITS, BLADES
& ABRASIVES
POWER TOOLS
CONCRETE & MASONRY
MATERIAL HANDLING
LIGHT EQUIPMENT
NOTES
292
Call us at: 8 00-6 6 9-778 8
INDEX
A
Adapters, Concrete Tool – KRAFT TOOL CO.
Adhesive – SEYMOUR
43
220
Air Compressor – DEWALT
1
Blades, Abrasive – DEWALT
83
Blades, Abrasive – NORTON CLIPPER
84
Blades, Abrasive – TARGET
83
Blades, Band Saw – MILWAUKEE
92
Blades, Chop Saw – DEWALT
84
Blades, Diamond – DEWALT
84
Air Purifiers – MSA
248
Blades, Hacksaw – LENOX
98-99
Alarms – ECCO
270
Blades, High Speed Diamond – TARGET
84-85
Anchor Accessories – DBI SALA
254
Blades, Jig Saw – DEWALT
Anchor Accessories – PROTECTA
253
Blades, Jig Saw – LENOX
Anchorage Connectors – DBI SALA
253
Blades, Reciprocating Saw – DEWALT
103-104
Blades, Reciprocating Saw – LENOX
105-106
Anchors – DBI SALA
252-253
Anchors – SIMPSON STRONG TIE
39-40
Apparel, Summer – ALLSAFE SMC
277
Blades, Saw – DEWALT
Apparel, Winter – ALLSAFE SMC
277
Blades, Saw – IRWIN
Asphalt Lutes – BLACK TOP TOOLS INC.
Augers & Auger Bits – GENERAL EQUIPMENT
39
2
101-103
103
Blades, Reciprocating Saw – MILWAUKEE
89
Blades, Saw – MILWAUKEE
89-90
Blankets – MIDWEST CANVAS CORPORATION
Awls – KLEIN TOOLS
128
Bottoms, Clothing – CARHARTT
Axes – AMES TRUE TEMPER
128
Braces – FLOUR CITY BRUSH/FLO-PAC
60
280-282
Brackets, Concrete Tool – KRAFT TOOL CO.
B
107
90-92
232
44
Breakers – INGERSOLL RAND
3
Breakers – SULLAIR
2
2
Bags, Trash – POLY-AMERICA
207
Breakers – WACKER
Banding – RENFER
197
Bricks, Rubbing – NORTON CLIPPER
Bar Ties – MARMAC WIRE
197
Brooms – FLOUR CITY BRUSH/FLO-PAC
232-233
38
Brushes – FLOUR CITY BRUSH/FLO-PAC
233-234
Barrel Lift & Drum Stand – MHS
130-131
Brushes – MILWAUKEE BRUSH
Bars – ESTWING
129
Brushes – MILWAUKEE BRUSH
93
Bars – KLEIN TOOLS
130
Bucket – ROUNDS INDUSTRIES
198
Bars – STANLEY PROTO TOOLS
129
Bungee Cords – ENTERPRISE RUBBER INC.
199
Batteries – ENERGIZER
213
Busters & Chippers – INGERSOLL RAND
Battery – DEWALT
80
Battery Packs – DEWALT
81
Battery Packs – MILWAUKEE
81
Belts, Body – DBI SALA
254
Belts, Work – CUSTOM LEATHERCRAFT
291
Binoculars – BUSHNELL
197
Bit Sets, Hex – STANLEY PROTO TOOLS
146
Bit Tips – DEWALT
107-108
Bit Tips – POWER FASTENERS
109
Bits – LENOX
109
Bits, Carbide – DEWALT
94
Bits, Core – DEWALT
94
Bits, Core – METABO
95
Bits, Core - TARGET
95
Bits, Drill – CHAMPION
97
Bits, Drill – DEWALT
Bits, Drill – IRWIN
95-96
98
Bits, Hex – STANLEY PROTO TOOLS
146-147
Bits, Spline – DEWALT
111-112
Blade Guards – DEWALT
82
234
INDEX
Bars – AMES TRUE TEMPER
85
3
C
Cables, Locking – MASTER LOCK
236
Calculators, Construction – CALCULATED INDUSTRIES
208
Carb Cleaner – PERMATEX
203
Cement Compound – HARTLINE PRODUCTS CO., INC.
60
Chain Accessories – COOPER HAND TOOLS
28-30
Chains – COOPER HAND TOOLS
27-28
Chalk – IRWIN
200
Chalk – KESON
200
Chalk Line Reels – IRWIN
201
Chalk Line Reels – KESON
201
Chalk Line Reels – STANLEY
201
Chargers – DEWALT
Chargers/Radio – MILWAUKEE
Chisels – STANLEY PROTO TOOLS
81
82
138
Clamp, Chain – COOPER HAND TOOLS
138
Clamp, Sheet Metal – COOPER HAND TOOLS
136
293
INDEX
Clamp, Welding – COOPER HAND TOOLS
Clamps, C – COOPER HAND TOOLS
Clamps, C – STANLEY PROTO TOOLS
Diggers – NUPLA
190
137
Diggers – UNION TOOLS
190
Diggers/Tampers – AMES TRUE TEMPER
139
136-137
Clamps, C – WARREN TOOL GROUP
137
Discs, Sanding – MILWAUKEE
109
Cleaner/Degreaser – PERMATEX
204
Discs, SDS – DEWALT
110
Cleaners – PERMATEX
203
Dollies, Pipe – SUMNER
35
Cleaning Supplies – COTTO WAXO
208
Drills – DEWALT
63
Coats – CARHARTT
285
Drills – MILWAUKEE
64
Drills, Cordless – DEWALT
61
Combo Kits, Power Tools – DEWALT
61
Compaction, Plate Compactors – MULTIQUIP
Compaction, Plate Compactors – WACKER
Compaction, Rammers – WACKER
3-4
4
4-5
Compaction, Tampers – INGERSOLL RAND
Compaction, Tampers – MULTIQUIP
Drills, Cordless – MILWAUKEE
61
Drills, Magnetic – HOUGEN
76-77
Drills, Magnetic – MILWAUKEE
76
5
Drills, Rock – SULLAIR
20
5-6
Drink Mix – GATORADE
209-210
Concrete Buckets – GAR-BRO MANUFACTURING CO.
42
Drive Adapters, 1/2” – STANLEY PROTO TOOLS
117
Concrete Cart – GAR-BRO MANUFACTURING CO.
43
122
Concrete Equipment Accessories – ADVANCED CONCRETE
TECHNOLOGIES
113
6
Drive Extensions, 1/2” – STANLEY PROTO TOOLS
117
Concrete Equipment, Mixer Accessories – MULTIQUIP
7
123
Concrete Equipment, Mixers – MULTIQUIP
7
Concrete Equipment, Mixers – STONE
6
Drive Handles, 1/2” – STANLEY PROTO TOOLS
117-118
Concrete Equipment, Power Buggies – MULTIQUIP
8
123
8-9
113
118
Concrete Equipment, Saws – STIHL
INDEX
136
Concrete Equipment, Saws – TARGET
9
Drive Hex Bits Sets, 1/2” – STANLEY PROTO TOOLS
Concrete Equipment, Saws & Accessories – ICS
8
Drive Hex Bits, 1/2” – STANLEY PROTO TOOLS
118
Drive Impact Socket Sets, 1/2” – STANLEY PROTO TOOLS
119
Drive Impact Socket Sets, 3/8” – STANLEY PROTO TOOLS
114
Concrete Equipment, Screeds & Accessories – ADVANCED
CONCRETE TECHNOLOGIES
Concrete Equipment, Trowels – WACKER
Concrete Equipment, Trowels & Accessories – MULTIQUIP
9-10
10-11
10
Containers, Trash – RUBBERMAID
207
Coolers – IGLOO
262
Coolers – RUBBERMAID
261
Cords – COLEMAN CABLE INC.
214-216
Counter – KESON
209
Couplers – APACHE HOSE & BELTING CO., INC.
219
Crimpers – KLEIN TOOLS
139
Cups – SOLO
209
Cutter, Rebar – COOPER HAND TOOLS
134
Cutter, Rebar – MULTIQUIP
59
Cutter, Strap – COOPER HAND TOOLS
134
Cutters, Bolt – COOPER HAND TOOLS
133
Cutters, Bolt – KLEIN TOOLS
133
Cutters, Bolt – WARREN TOOL GROUP
133
Cutters, Cable – COOPER HAND TOOLS
134
Cutters, Cable – KLEIN TOOLS
135
Cutters, Tubing – RIDGID
135
Cylinders – SIMPLEX
Drive Impact Sockets, 1” – STANLEY PROTO TOOLS
119-120
Drive Impact Sockets, 3/4” – STANLEY PROTO TOOLS
123-124
114-115
Drive Ratchets, 1/2” – STANLEY PROTO TOOLS
121
124
115
Drive Socket Sets, 3/4” – STANLEY PROTO TOOLS
125
Drive Socket Sets, 3/8” – STANLEY PROTO TOOLS
116
Drive Sockets, 1” – STANLEY PROTO TOOLS
127
Drive Sockets, 1/2” – STANLEY PROTO TOOLS
125
116-117
Drive, 3/8” – STANLEY PROTO TOOLS
113
Drivers, Nut – COOPER HAND TOOLS
161
Drivers, Nut – DEWALT
112
Drivers, Nut – KLEIN TOOLS
161
Duster – FLOUR CITY BRUSH/FLO-PAC
234
E
Epoxy – SIMPSON STRONG TIE
Diggers – INGERSOLL RAND
271
121-122
Engines – HONDA POWER EQUIPMENT
Decals – NATIONAL MARKER COMPANY
126
30
D
294
113
Eye Bolts – STANLEY PROTO TOOLS
11
Call us at: 8 00-6 6 9-778 8
11
42
139-140
INDEX
Eye Wash – SWIFT
260
F
Grips, Wire Pulling – KLEIN TOOLS
Gun, Heat – MILWAUKEE
74
Guns, Caulk – NEWBORN
199
H
Fasteners – ARROW FASTENER COMPANY
140
Fasteners Accessories – ARROW FASTENER COMPANY
140
Fencing – CONWED
269
Hacksaws – COOPER HAND TOOLS
Fencing – MUTUAL INDUSTRIES
269
Hacksaws – DEWALT
Files – COOPER HAND TOOLS
140-141
178
145
144-145
Hammer, Demolition – BOSCH
74
264
Hammer, Demolition – DEWALT
74
First Aid Kits – SWIFT
261
Hammerdrills – DEWALT
66
Fittings – DIXON
219
Hammerdrills – MILWAUKEE
66
62
Fire Extinguishers – KIDDE
Flange – DEWALT
82
Hammerdrills, Cordless – DEWALT
Flashlights – DEWALT
80
Hammerdrills, Cordless – MILWAUKEE
Flashlights – ENERGIZER
210
144
144
Flashlights – MAG-LITE
212-213
Hammers – COOPER HAND TOOLS
Flashlights – PELICAN PRODUCTS
211-212
Hammers – DEWALT
Foot Safety – ELLWOOD SAFETY
251
Hammers – ESTWING
Footwear – BATA INDUSTRIALS
278
Hammers – INGERSOLL RAND
Forms, Concrete – JET CONCRETE
56
64
142-143
19
Hammers – STANLEY PROTO TOOLS
Fuel Tanks – JOBOX
241
Hammers, Rotary – DEWALT
Fuel Transfer Pump Accessories – FIL-RITE
242
Hammers, Rotary – MILWAUKEE
Fuel Transfer Pumps – FIL-RITE
242
Hammers, Sledge – AMES TRUE TEMPER
Funnels – PLEWS LUBRIMATIC
217
Hammers, Sledge – WARREN TOOL GROUP
65-66
Harness Accessories – DBI SALA
Gas Cans – WEDCO
265-266
Harness Set – PROTECTA
132
235
44-45
256
256
142
Harnesses – DBI SALA
12
Harnesses – PROTECTA
254
Generators – HONDA GENERATORS
12
Hasp – MASTER LOCK
236
Generators – MULTIQUIP
13
Heaters – MARVIN
13
Heaters – MASTER PORTABLE HEATERS
12
Hitches – MASTER LOCK
240
Hoes – UNION TOOLS
191
Gear Pullers – STANLEY PROTO TOOLS
Generators – DEWALT
Generators – TSURIMI PUMP
Generators – WACKER
Glasses Accessories, Safety – SMITH & WESSON
Glasses, Safety – ALLSAFE SMC
Glasses, Safety – GATEWAY SAFETY
246
255-256
15
14
246-247
Hoists – DUFF-NORTON
26
243-244
Hoists – INGERSOLL RAND
27
Glasses, Safety – HUNTSMAN
248
Hoses – APACHE HOSE & BELTING CO., INC.
Glasses, Safety – SMITH & WESSON
245
Hoses, High Pressure – SIMPLEX
247
Hoses, Water – GILMOUR
Glasses, Safety – UVEX
Gloves – CUSTOM LEATHERCRAFT
289-290
Gloves – MIDWEST GLOVE
287-289
219
30
196
I
Glue, Super – PERMATEX
202
Grease – PLEWS LUBRIMATIC
217
Impact – DEWALT
75
Grease Guns & Fittings – PLEWS LUBRIMATIC
218
Impact – INGERSOLL RAND
19
Impact – MILWAUKEE
75
Grinders, Angle – DEWALT
67
Grinders, Angle – METABO
68
Grinders, Angle – MILWAUKEE
68
Grinders, Die – DEWALT
69
Grinders, Die – MILWAUKEE
70
INDEX
Handles, Concrete Tool – KRAFT TOOL CO.
264-265
131-132
205-206
Handles – FLOUR CITY BRUSH/FLO-PAC
Gas Cans – JUSTRITE MANUFACTURING
143-144
64-65
Hand Cleaners – PERMATEX
G
62
Hammers – AMES TRUE TEMPER
J
Jack Stands – SUMNER
32
295
INDEX
Jackets – CARHARTT
286-287
Mop Bucket – RUBBERMAID
207
207
Jackhammers – INGERSOLL RAND
20
Mops – FLOUR CITY BRUSH/FLO-PAC
Jacks – SIMPLEX
31
Motors & Stand – MILWAUKEE
77
Motors/Meter Box Assembly – HOUGEN
77
K
Key Sets, Hex – STANLEY PROTO TOOLS
Knee Boards – KRAFT TOOL CO.
53
Nailers – DEWALT
78
Knee Pads – CUSTOM LEATHERCRAFT
290
Nibbler – DEWALT
79
Knife – KLEIN TOOLS
147
Nuts, Coupling – CHICAGO HARDWARE
Knife, Putty – STANLEY
169
Knives, Box – STANLEY
127
Knives, Box – SUPERKNIFE
127
L
Ladder Accessories – WERNER
33
Ladders – WERNER
32-33
Lanyards – DBI SALA
O
Oil & Lubricants – STIHL
188
Oil Absorbent – OIL DRI
208
Oil, Hydraulic – SIMPLEX
31
Oil, Rock Drill – UNIMARK
226
Overalls – CARHARTT
283-284
257-258
P
258
Lasers – DEWALT
148
Levels – KLEIN TOOLS
152
Padlocks – MASTER LOCK
Levels – SANDS LEVEL
153
Paint Applicators – KESON
221
Levels – STABILIA LEVELS
154
Paints, Inverted Tip Marking – SEYMOUR
221
149-151
Paints, Spray – SEYMOUR
220
148
Paints, Traffic – SEYMOUR
221
Levels, Laser – DEWALT
Levels, Laser – PACIFIC LASER
151-152
237-239
Pan – FLOUR CITY BRUSH/FLO-PAC
235
Lifelines – DBI SALA
259
Pencil, Carpenter – KESON
198
Lifelines – PROTECTA
258
Picks, Clay – AMES TRUE TEMPER
128
Pins – AMES TRUE TEMPER
161
Pins – KLEIN TOOLS
162
Lifts – SUMNER
34
Light Bars & Strobes – ECCO
269-270
Lighting – THE DESIGNERS EDGE
214
Pins, Drive – SIMPSON STRONG TIE
41
57
Load Binders – COOPER HAND TOOLS
36
Pins, Form – JET CONCRETE
Load Binders – THE CROSBY GROUP, INC.
35
Plastic – POLY-AMERICA
225
Lock Box, Group – MASTER LOCK
266
Pliers – COOPER HAND TOOLS
163-164
Lockout Hasps – MASTER LOCK
266
Pliers – KLEIN TOOLS
166-167
Lockout Kits – MASTER LOCK
267
Pliers – STANLEY PROTO TOOLS
164-166
Lockout Stations – MASTER LOCK
267
Plugs – APACHE HOSE & BELTING CO., INC.
Lubricants – PERMATEX
203
Plumb Bobs – SANDS LEVEL
152
Lubricants – WD-40
203
Post Driver – AMES TRUE TEMPER
129
Pressure Washers – SHARK CLEANING EQUIPMENT
M
Marking Machine – SEYMOUR
Protection, Head – MSA
221
Marking Tools – MARKAL
296
231
Lanyards – PROTECTA
Levels, Laser – CST/BERGER
INDEX
N
147
222-225
219
15
249-250
Protection, Hearing – HOWARD LEIGHT
250
Protective Wear – KIMBERLY-CLARK CORPORATION
252
Pullers, Cable – MAASDAM POW’R-PULL
25
Marking Wand – ROLATAPE
222
Pump, Barrel – PLEWS LUBRIMATIC
Marking Wand – SEYMOUR
222
Pumps – LITTLE GIANT PUMP COMPANY
18
Masks – GERSON
248
Pumps – MULTIQUIP
17
Mattocks – AMES TRUE TEMPER
129
Pumps – SIMPLEX
31
Measurers & Fillers – PLEWS LUBRIMATIC
217
Pumps – TSURIMI PUMP
18
Mirrors – STANLEY PROTO TOOLS
160
Pumps – WACKER
16
Call us at: 8 00-6 6 9-778 8
198
INDEX
Punches – AMES TRUE TEMPER
169
Punches – STANLEY PROTO TOOLS
167-169
R
Screw Extractors – STANLEY PROTO TOOLS
170
Screwdriver Bit Sets – STANLEY PROTO TOOLS
170
Screwdriver Bits – STANLEY PROTO TOOLS
170
Screwdriver Set – KLEIN TOOLS
170
Screwdrivers – COOPER HAND TOOLS
172
Screwdrivers – DEWALT
Radios – MOTOROLA
Rags – AMERICAN TEXTILE MILLS, INC.
79
225
Screwdrivers – KLEIN TOOLS
204
Screwdrivers – STANLEY PROTO TOOLS
171
Rain Gear – BATA INDUSTRIALS
278-279
Sealant – PERMATEX
Rakes – UNION TOOLS
191-192
Sealants & Patches – DAYTON SUPERIOR
172-173
202
59
Ratchet – INGERSOLL RAND
16
Shears – COOPER HAND TOOLS
Ratchet Assemblies – LIFTALL
25
Shears – DEWALT
Rebar Caps – ALLSAFE SMC
58
Shears – MILWAUKEE
Rebar Caps – PARAGON PRODUCTS
58
Shirts – CARHARTT
285
174
79
79
Respirators – GERSON
249
Shovels – HISCO
193
Respirators – MOLDEX
249
Shovels – NUPLA
194
Rope Accessories, Wire – COOPER HAND TOOLS
37
Shovels – UNION TOOLS
Rope Accessories, Wire – THE CROSBY GROUP, INC.
37
Sign Posts – RAINBOW SIGNS
271
Signage – ALLSAFE SMC
271
Rope Grabs & Lifelines – DBI SALA
Rope Slings, Wire – LIFTALL
259
36-37
Ropes – BEVIS ROPE
226-227
S
Safety, Highway – STAR HEADLIGHT LANTERN
268
251
68
Sanders – MILWAUKEE
69
Sanders/Grinders – MILWAUKEE
69
Saws, Band – DEWALT
70
Saws, Band – MILWAUKEE
Saws, Chain – STIHL
70
187
Saws, Chop – DEWALT
70
Saws, Chop – MILWAUKEE
71
Saws, Circular – DEWALT
71
Saws, Circular – MILWAUKEE
72
Saws, Circular – SKIL
72
Saws, Hand – LENOX
146
Saws, Hand – STANLEY
145
Saws, Hole – DEWALT
99
Saws, Hole – LENOX
272-273
Signage – RAINBOW SIGNS
271-272
Slings – LIFTALL
273-274
100-101
174
Snips – STANLEY PROTO TOOLS
174
Spades, Drain – NUPLA
191
Spades, Drain – UNION TOOLS
190
Sprayers – CHAPIN MANUFACTURING
227
Spreaders – SIMPLEX
31
Square – KLEIN TOOLS
155
Square – SANDS LEVEL
155
Square – STANLEY
154
Squeegees – FLOUR CITY BRUSH/FLO-PAC
235-236
Stake Puller – JET CONCRETE
57
Stakes, Nail – JET CONCRETE
57
Stones, Grinding – TARGET
88
Storage – JOBOX
241
Strippers/Cutters, Wire – KLEIN TOOLS
178
T
Tags – MASTER LOCK
267
Tampers – AMES TRUE TEMPER
131
Saws, Jig – DEWALT
72
Tape – INTERTAPE POLYMER GROUP
228
Saws, Miter – DEWALT
73
Tape – MUTUAL INDUSTRIES
263
73
Tape, Barricade – KESON
262
Saws, Reciprocating – MILWAUKEE
73
Tape, Flagging – KESON
263
Scaffolding, Utility – BIL-JAX
34
Tapes, Fish – KLEIN TOOLS
142
20
Tarps – HAWTHORNE MISSOURI, INC.
229
193
Tarps – SCHOTT INDUSTRIAL
229
Scoops – UNION TOOLS
192
Threaded Rods – CHICAGO HARDWARE
231
Scrapers – STANLEY
169
Threadlocker – PERMATEX
202
Saws, Reciprocating – DEWALT
Scalers – INGERSOLL RAND
Scoops – NUPLA
INDEX
268
Sanders – DEWALT
Signage – NATIONAL MARKER COMPANY
Snips – COOPER HAND TOOLS
Safety, Highway – ALLSAFE SMC
Safety, Personal – ERGODYNE
193-194
297
INDEX
Tie Wire – MARMAC WIRE
230
Truck, Wood Deck Platform – MHS
38
Tie Wire Wheel – MARMAC WIRE
230
Tubes, Concrete – NEWARK PAPERBOARD PRODUCTS
56
Ties – MUTUAL INDUSTRIES
263
Tile & Carpet Tools – KRAFT TOOL CO.
230
Tool Bags – CUSTOM LEATHERCRAFT
Tool Boxes – JOBOX
Tool Holders – CUSTOM LEATHERCRAFT
Tool Holders – KLEIN TOOLS
Vacuum Accessories – SHOP-VAC
Vacuum Attachments – SHOP-VAC
176
177
Tool Pouches – CUSTOM LEATHERCRAFT
Tool Sets – COOPER HAND TOOLS
177-178
178
Vacuum/Blowers – STIHL
21-22
22
187
Vacuums – RIDGID
20
Vacuums – SHOP-VAC
21
Vests, Safety – ALLSAFE SMC
260
Vibrators – MULTIQUIP
23
Tools, Concrete, Bars – KRAFT TOOL CO.
45
Vibrators – WACKER
22
Tools, Concrete, Brooms – KRAFT TOOL CO.
45
Vibrators & Accessories – NORTHROCK
23
Tools, Concrete, Concrete Placers – KRAFT TOOL CO.
51
Tools, Concrete, Corner Tools – KRAFT TOOL CO.
46
Tools, Concrete, Curb Tools – KRAFT TOOL CO.
46
Tools, Concrete, Darbies – KRAFT TOOL CO.
46
Tools, Concrete, Displacers – KRAFT TOOL CO.
46
Tools, Concrete, Edgers – KRAFT TOOL CO.
47
Tools, Concrete, Floats – KRAFT TOOL CO.
INDEX
175
240-241
176-177
Tool Holders – STANLEY
48-49
Tools, Concrete, Floor Scrapers – KRAFT TOOL CO.
50
Tools, Concrete, Fresno Trowel – KRAFT TOOL CO.
50
Tools, Concrete, Groovers – KRAFT TOOL CO.
50
Tools, Concrete, Gutter Tools – KRAFT TOOL CO.
51
Tools, Concrete, Miscellaneous – KRAFT TOOL CO.
45
Tools, Concrete, Rub Bricks – KRAFT TOOL CO.
51
Tools, Concrete, Screeds – KRAFT TOOL CO.
51
Tools, Concrete, Spreaders – KRAFT TOOL CO.
52
Tools, Concrete, Trowel Blades – KRAFT TOOL CO.
52
Tools, Concrete, Trowels – KRAFT TOOL CO.
52
Tools, Cut-off – DEWALT
69
Tools, Demolition – SULLAIR
11
Tools, Drywall – KRAFT TOOL CO.
52
Tools, Hand, Landscaping – STIHL
188-189
Tools, Masonry, Brick Tools – KRAFT TOOL CO.
54
Tools, Masonry, Brushes – KRAFT TOOL CO.
54
Tools, Masonry, Jointers – KRAFT TOOL CO.
54
Tools, Masonry, Miscellaneous – KRAFT TOOL CO.
Tools, Masonry, Trowels – KRAFT TOOL CO.
Tools, Measuring – COOPER HAND TOOLS
160
Tools, Pavement Breaker – VULCAN DEMOLITION TOOLS
58
Tools, Plaster, Floats – KRAFT TOOL CO.
55
189
Towels – KIMBERLY-CLARK CORPORATION
205
231
80
Wheelbarrow Tire – CAREFREE TIRE
195
Wheelbarrows – BRENTWOOD INDUSTRIES
195
Wheelbarrows – UNION TOOLS
195
Wheels – DEWALT
Wheels – UNITED ABRASIVES
Wheels, Grinding – DEWALT
Wheels, Measuring – ROLATAPE
88
86-88
89
159-160
Wipes, Hand – PERMATEX
205
Wood Splitter – AMES TRUE TEMPER
128
Woodsplitting Wedges – AMES TRUE TEMPER
Workwear Accessories – CARHARTT
128
279-280
Workwear, Personal – CUSTOM LEATHERCRAFT
291
Wrench, Spud – COOPER HAND TOOLS
138
Wrenches – COOPER HAND TOOLS
185
Wrenches – KLEIN TOOLS
Wrenches – STANLEY PROTO TOOLS
184
179-184
Wrenches, Pipe – RIDGID
162
Wrenches, Pipe – STANLEY PROTO TOOLS
163
55
Tools, Trimming – UNION TOOLS
Truck, Hand – MHS
Wet/Dry Vac – DEWALT
55
159
Trimmers – STIHL
Wall Jacks – PROCTOR
155-158
Tools, Multipurpose – KLEIN TOOLS
Towels, Shop – AMERICAN TEXTILE MILLS, INC.
W
53-54
Tools, Measuring – CST/BERGER
Tools, Plaster, Miscellaneous – KRAFT TOOL CO.
298
V
56
Tire Gauges – PLEWS LUBRIMATIC
204
187-188
38
Call us at: 8 00-6 6 9-778 8
FOR
BRANCH
USE ONLY
CREDIT APPLICATION MUST FULLY COMPLETE (SEE REVERSE)
BRANCH NO.
SALESMAN NO.
REVISED (PREVIOUS INCOMPLETE OR DECLINE)
RUSH (SAME DAY OR NEXT DAY RENTAL) DATE/TIME NEEDED
CUSTOMER NO.
BUSINESS NAME
STREET ADDRESS
CITY
STATE
ZIP CODE & 4
CITY
STATE
ZIP CODE & 4
PRIMARY CONTACT
TELEPHONE NO. (INCLUDING AREA CODE)
FAX NO. (INCLUDING AREA CODE)
AP CONTACT
BILLING ADDRESS
BUSINESS TYPE (CHECK ONE)
SOLE PROPRIETOR
LLC
BUSINESS DESCRIPTION
PARTNERSHIP
GOVERNMENT
CORPORATION
NON-PROFIT
AVERAGE NO. OF EMPLOYEES
PRINCIPLE OWNERS, OFFICERS, STOCKHOLDERS AND/OR DIRECTORS: (MUST HAVE SOCIAL SECURITY NO. IF SOLE PROPRIETOR OR PARTNERSHIP)
NAME
TITLE
SOCIAL SECURITY NUMBER
FEDERAL TAXPAYER ID FOR CORPORATIONS
DATE AND STATE INCORPORATED/FORMED
CONTRACTOR’S LICENSE NO. & EXPIRATION DATE
PARENT CORPORATION NAME AND CITY/STATE
ARE YOU LISTED WITH DUN & BRADSTREET?
NO
YES, DUN’S #
INITIAL CREDIT REQUIREMENT
YEARS IN BUSINESS UNDER PRESENT OWNERSHIP
MONTHLY CREDIT REQUIREMENT
TRADE REFERENCES: (CREDIT PURCHASES)
BUSINESS
ACCOUNT NO.
CONTACT
CITY/STATE
BUSINESS
ACCOUNT NO.
CONTACT
CITY/STATE
BUSINESS
ACCOUNT NO.
CONTACT
CITY/STATE
BUSINESS
ACCOUNT NO.
CONTACT
CITY/STATE
BUSINESS
ACCOUNT NO.
CONTACT
CITY/STATE
BANK
CHECKING ACCOUNT NO.
CITY/BRANCH
CONTACT
LOAN ACCOUNT NO.
PURCHASE ORDER REQUIRED?
TAX EXEMPT?
YES
NO
YES (MUST ATTACH TAX CERTIFICATE)
NO
PHYSICAL DAMAGE COVERAGE FOR RENTAL EQUIPMENT?
YES (MUST ATTACH INSURANCE CERTIFICATE)
NO (LOSS DAMAGE WAIVER WILL BE CHARGED)
BONDING COMPANY (NAME/ADDRESS)
LIABILITY INSURANCE COVERAGE?
YES (MUST ATTACH INSURANCE CERTIFICATE)
NO
FOR THE PURPOSE OF ESTABLISHING A CREDIT LINE WITH HERTZ EQUIPMENT RENTAL CORPORATION,
I HEREWITH AUTHORIZE THE ABOVE NAMED BANK AND TRADE REFERENCES TO FURNISH THE REQUESTED ACCOUNT/CREDIT INFORMATION.
AUTHORIZED BY: NAME (PLEASE PRINT OR TYPE)
TITLE
SIGNATURE AND DATE SIGNED
APPROVED/DECLINED & REASON
D&B NO. & RATING
CREDIT LIMIT
CREDIT MANAGER SIGNATURE & DATE
S.I.C.
CUSTOMER NO.
8 0 0 - 6 6 9 - 7 7 8 8 • w w w. h e r t z e q u i p . c o m
FOR CENTRAL OFFICE USE ONLY
ACCOUNT AGREEMENT AND TERMS
The company submitting this application (the “Undersigned”) acknowledges and agrees to the following:
1. This Account Agreement And Terms (“Agreement”) supercedes, with respect to rentals made subsequent to the acceptance of this application by Hertz Equipment Rental Corporation
(“HERC”), any prior Account Agreement and Terms governing the extension of credit by HERC to the Undersigned. Rentals by HERC to the Undersigned made subsequent to the acceptance of this application by HERC shall be governed by the Rental Contract pertaining to such rental and by this Agreement. In the event that any provisions of the Rental Contract shall conflict with any provision of this Agreement, the Rental Contract shall control.
2. The acceptance of this application shall not create any obligation on the part of HERC to rent equipment to the undersigned or to extend credit to the undersigned in connection with any
such rental.
3. It is understood and agreed that the undersigned specifically consents to HERC investigating the undersigned’s credit history and the information provided on this application, for the
purpose of extending credit.
4. If credit is extended, the undersigned acknowledges that HERC’s credit terms are payment in full net ten (10) days from the date of invoice.
5. All sums are due and payable in the County of Oklahoma at the mailing address of: P.O. Box 26390, Oklahoma City, OK 73126 or in such other county and/or at such other mailing
address as shall be specified on the invoice. In the event of a lawsuit, venue shall reside in the aforementioned County.
6. In the event the undersigned fails to timely pay any invoice, the undersigned agrees to pay a late fee to HERC on such delinquent invoice until same is fully paid, at the rate of 1.8% per
month or maximum rate allowed by the laws of the jurisdiction where the originating HERC branch stated on the invoice is located, whichever is less.
7. The undersigned agrees that, with or without notice or demand, the undersigned shall reimburse HERC, for all expenses (including counsel fees) incurred by HERC in connection with
any indebtedness of the applicant or the collection thereof.
8. The undersigned agrees fully and promptly to furnish to HERC information needed or requested by HERC for proper filling out and service of preliminary notices under the mechanic’s
lien laws.
9. This agreement shall be governed and construed by the laws of the STATE of NEW JERSEY, with the exception of collection, lien enforcement and bond claims (‘’Collections’’) for which
the laws of Oklahoma shall govern. Customer consents to jurisdiction in the State and United States District Court, Western District, of Oklahoma for resolution of all Collections.. If any
provision, or any part of any provision of this Agreement or the application thereof is held invalid or unenforceable, the remainder of this Agreement shall not be affected thereby and to
this end the provisions of this Agreement are declared severable.
10. If the equipment rented hereunder is used in the construction of a particular private or public work of improvement, the undersigned agrees that all monies owed to or received by the
undersigned in connection with such work or works of improvements shall be held by undersigned in trust for the benefit of HERC, shall be segregated from other monies of the undersigned, and shall be used only to pay HERC, to the extent that such monies are attributable to the equipment rented hereunder until HERC has been paid in full for such rentals.
11. The undersigned recognizes that it may from time to time be owed money by HERC due to contracts or transactions between the undersigned and HERC which are separate and distinct for the rentals contemplated by this Credit Application and Agreement. HERC shall have the right to withhold from the undersigned any monies owed by HERC to the undersigned in
connection with any such other contracts or transactions and to offset the same against any sums owed by the undersigned to HERC in such amounts as may be deemed by HERC to be
reasonably necessary to cover such indebtedness of the undersigned. So long as this right of withhold and offset is carried out in good faith, the undersigned hereby waives any claims
against HERC for any consequential damages coming from such withhold and offset even if it is later determined that the withhold and offset was improper.
12. THE UNDERSIGNED HEREBY WAIVES THE RIGHT TO A JURY TRIAL OF ANY OR ALL CLAIMS OR DISPUTES WHICH MAY ARISE AFTER ACCEPTANCE OF THIS APPLICATION BY
HERC IN CONNECTION WITH THIS AGREEMENT OR ANY RENTAL CONTRACT BETWEEN THE UNDERSIGNED AND HERC.
13. The terms of this Agreement may be revised or supplemented from time to time by HERC sending the Undersigned notice of such changes. It will be presumed that the Undersigned
has received any such notice mailed to the Undersigned at the address shown on this Application or otherwise provided to HERC. The Undersigned’s making a rental from HERC using
credit after the effective date of such changes will constitute the Undersigned’s acceptance of such changes.
14. The undersigned agrees to promptly notify HERC in writing of any change in the undersigned’s business ownership/form or structure. If the undersigned fails to promptly notify HERC
of such change, then the undersigned expressly assumes full responsibility for all charges and/or credit extensions made on this account subsequent to such change.
Name (please print)
Title
Signature & Date
The undersigned individual who is either a principal of the credit applicant or a sole proprietor of the credit applicant, recognizing that his or her individual credit history may be a factor in
the evaluation of the credit history of the applicant, hereby consents to and authorizes the use of a consumer credit report on the undersigned by HERC, from time to time as may be needed, in the credit evaluation process.
Name (please print)
Social Security No.
Signature & Date
GUARANTY
In consideration of the extension of credit to the applicant named herein, the undersigned, jointly, severally and unconditionally guarantee and promise to pay all amounts now owing or
which may hereinafter become owing by the applicant to Hertz Equipment Rental Corporation (“HERC”). This is a continuing guaranty and obligations arising hereunder shall not be affected by any change in terms of indebtedness, the extension of credit beyond amounts specified herein, a change in the term or time for payment, a change in the form of indebtedness or the
acceptance of security or collateral. HERC shall not be required to exhaust any remedies against applicant prior to exercising rights granted hereby.
The undersigned hereby waives (a) notice of acceptance of this guaranty and of extensions of credit by HERC to the applicant; (b) presentment and demand for paying of any indebtedness
of the applicant; (c) protest and notice of dishonor or default to the undersigned with respect to any indebtedness of the applicant; (d) all other notices to which the undersigned might otherwise be entitled; (e) any demand for payment under this guaranty; (f) benefit of all exemptions and homestead laws; (g) all set-offs and counterclaims.
This is a guaranty of payment and not of collection and the undersigned further waives any right to require that any action be brought against the applicant or any other person or to
require that resort be had to any security.
The undersigned agrees that, with or without notice or demand, the undersigned shall reimburse HERC, to the extent that such reimbursement is not made by the applicant, for all expenses (including counsel fees) incurred by HERC in connection with any indebtedness of the applicant or the collection thereof, and will pay attorneys’ fees if this guaranty is placed with an
attorney for enforcement or collection from the undersigned.
The undersigned personal guarantor, recognizing that his or her individual credit history may be a necessary factor in the evaluation of this personal guarantee, hereby consents to
and authorizes the use of a consumer credit report on the undersigned by HERC, from time to time as may be needed, in the credit evaluation process.
If any provision or part of any provision of this guaranty is in conflict with any applicable statute or rule of law then such provision, or part thereof, as the case may be, shall be deemed
null and void to the extent that it may conflict therewith, but without invalidating the remaining provisions hereof or the remaining part of such.
THE UNDERSIGNED HEREBY WAIVES THE RIGHT TO A JURY TRIAL OF ANY OR ALL CLAIMS OR DISPUTES WHICH MAY ARISE IN CONNECTION WITH THIS GUARANTY.
The undersigned further acknowledge and represent that any titles written near their signatures below is/are merely intended to clarify the individual’s position with the customer and in no
way is intended to limit or cancel the personal nature of this guarantee.
Name (please print)
Social Security No.
Name (please print)
Social Security No.
Signature
Date
Signature
Date
Witness
Date
Witness
Date
HE5804cover
10/18/07
10:06 AM
Page 2
Thank You for Choosing Hertz Equipment
Rental to Meet Your Merchandise Needs.
As a trusted name in the equipment rental business, Hertz Equipment Rental has been a leader in providing quality equipment and service to our customers.
With the same commitment we are now able to provide you not only the equipment you need, but the
tools and supplies that are necessary at every jobsite.
With over 30 years of experience and 1000’s of items in stock, our Inside Sales Department in Kansas
City will be able to meet all of your tool & supply needs.
For quotes or inquiries please call 1-800-669-7788 or e-mail us at hertzsupplies@hertz.com.
1-800-669-7788
Ready to Help.
hertzsupplies@hertz.com
ATTENTION:
FEDERAL CUSTOMERS
Hertz Equipment Rental Is Now On Schedule for Equipment Rental & Contractor
Supply Sales
Hertz Equipment Rental GSA Schedule Contract Number: GS-21F-0020T
How to Order
Contract Period: July 12, 2007 - July 11, 2012
Call Toll Free: 1-800-669-7788 – Our knowledgeable and courteous staff are ready to assist you in
finding what you need.
E-mail us at hertzsupplies@hertz.com – Send an e-mail directly to our sales support staff and they
will respond to you with the information you need.
WE SHIP ANYWHERE IN THE US!
Contact Information: For supply sales nationwide, please call: 1-800-669-7788;
Or email: hertzsupplies@hertz.com
Easy & Convenient Payment Options
•
We accept most major credit cards.
•
CASH or COMPANY CHECK at your local Hertz Equipment Locations.
•
Open up a BUSINESS ACCOUNT by filling out the credit application at the back of this catalog.
Anchors
Bars
Bits (Core, Drill, etc.)
Blades
Chalk
Cleaning Supplies
Cutters (Bolt, Cable, etc.)
Drills
Fittings
Generators
Gloves
Grinders
Hammers
Impact Tools
Levels
Marking Tools
Nailers
Pumps
Safety Glasses
Saws
Signage
Tape
Tools (Concrete, Masonry, etc.)
Tool Boxes
Vacuums
Wheelbarrows
Workwear
And Much More!
For information and equipment rental rates regarding our GSA contract,
please contact us 888-777-3500.
Call us at: 8 00-6 6 9-778 8
1-800-669-7788
© 2007 Hertz Equipment Rental Corporation. All rights reserved
800-669-7788
www.hertzequip.com
Rentals z Sales z Service
800-669-7788

hand tools

Transcription

Similar documents

Corrosion of Steel in Concrete

Wahl Deluxe Style Pro Clipper Quick Start Guide

ibostar. - daetwyler.com

Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting

case study bellaire tower

HERE - isise

New Products 2011 New Products 2011

The Penn Township Campus Landscaping Beautification Project

CONTROLLED EXPANSION WATERSTOP

Tactical Katana