Marmi Range - National Tiles

Marmi Range
This is an exquisite range with earthy tones, exclusive to
National Tiles. As one of the best technical performing
double loaded porcelain tiles in the business, Marmi is
an adaptable range suitable for both commercial and
residential interior applications.
Lifetime Guarantee*
Floor tiles in this image:
Marmi BiancoPolished 600x600mm
Exclusive to National Tiles
*Terms and conditions apply
Floor tiles in this image:
Marmi Bianco Polished 600x600mm and Marmi Mare Polished 600x600mm
Factory Recommendations:
Not recommended for exterior floor applications
Not recommended where standing water is a common
occurrence
The tiles in this range are stain-resistant and require minimal
maintenance
Floor tiles in this image:
Marmi Fiume Polished 600x600mm
ILVA S.A.
Parque Industrial Pilar, Rusta 8, Km 60, Pilar, Buenos Aires, Argentina
For the Data:
following product(s):
Technical
SCS Global Services does hereby certify that an independent assessment has been conducted on behalf of:
The marmi
range
is designed
Porcelain
Tile: for residential and commercial interior floor and wall
applications
Marmi Series
ILVA S.A.
Product performance specifications
Industrial Pilar, Rusta
8, Km 60, Pilar, Buenos
This product meets all of Parque
the necessary
qualifications
toAires,
be Argentina
certified for the following claim:
Test description ®
Norm
of reference Required value
For the following
product(s):
FloorScore
Marmi Series Rectified Technical Porcelain Tile
Indoor Air Quality Certified to SCS-EC10.3-2014
Water Absorption
ISO 10545-3
≤ 0.5%
ILVA
≤ 0.04%
Bending Strength
≥ 40 N/mm
Conforms to the CDPH/EHLB Standard Method v1.1-2010 (effective January 1, 2012) for the school classroom and private office
This product meets all of the necessary qualifications to be certified2for the following claim:
2
parameters when modeled as Flooring.
ISO 10545-4
35 N/mm
Minimum 20% Pre-consumer Recycled Content
Measured Concentration of Total Volatile Organic Compounds (TVOC): Less than/equal to 0.5 mg/m3 (in compliance with
Surface
Hardness (Mohs Scale)
ENto101
6 MOHS
6
Conforms
the SCS Recycled ≥Content
Standard V7-0
MINIMUM 20% RECYCLED CONTENT
PRE-CONSUMER
CDPH/EHLB Standard Method v1.1-2010)
Frost Resistance
ISO# 10545-12
Required
Registration
SCS-MC-02124
Registration # SCS-FS-02148
Valid from: January 1, 2015 to December 31, 2015
Valid from: February 1, 2015 to January 31, 2016
Resistant
SCS Global Services is currently the only certification body approved by the Resilient Floor Covering Institute (RFCI) to provide FloorScore® product
certification; certified products are only listed on the SCS Green Products Guide, http://www.scsglobalservices.com/certified-green-products-guide.
Size 600x600mm | Available in polished finish
Bianco
Mare
Robert J. Hrubes, Ph.D., Executive Vice President
Robert J. Hrubes, Ph.D., Executive Vice President
SCS Global Services
SCS Global Services
2000
PowellPowell
Street, Ste.
600, Emeryville,
CA 94608
USA
2000
Street,
Ste. 600,
Emeryville,
CA 94608 USA
Fiume
Basic Specifications:
Porcelain
Polished finish
Rectified edge
Surface reflectivity free guarantee
Suitable for interior applications
V3 moderate variation
Lifetime guarantee*
Exclusive to National Tiles
Made in Argentina
National Tiles Co Pty Ltd
nationaltiles.com.au
*Terms and conditions apply