Classic Line controls

Transcription

Classic Line controls
Classic Line controls
Classic Line controls
Electronics
Design the system you want
HydroAir International’s new line of Classic Line
control boxes gives you numerious installation possibilities.
Use all control boxes with a combination of
touches and LED buttons - the possibilities are
almost endless.
Complete system offering
Customization of
programme possible
Classic Line on/off
One box - different jumper
controlled features
RF remote control
On/off functions
Automatic dry-out of air system
Control boxes are IPx5
Classic Line variable
Initial setting of variable min
and max output
Easy access to screwless
wire installation
Automatic or manual
dry-out of air system
Massage mode
”pulsating effect”
HydroAir Internatioanal™ ∙ Roustvej 50 ∙ DK-6800 Varde ∙ Tel. (+45) 75 22 46 88 ∙ Fax (+45) 75 22 52 45 ∙ www.hydroair.dk ∙ info@hydroair.dk
2009.09
Classic Line controls
Classic Line on/off
Classic Line variable
20-0241 - 1 function on/off
Use the box as a standard 1 function on/off or for
water inlet or water level control.
20-0312 / 20-0313 - 2 functions on/off plus 1
variable function
Use our 3 function control box to install e.g. a
pump, a light and the blower as a variable function.
20-0242 - 2 functions on/off
Setting of automatic dry-out of air system is
possible. Furthermore by installing a special PIC,
you can control 2 functions with only 1 function
touch/LED button.
20- 0243 / 20-0244 - 3 and 4 functions on/off
with RF module for remote control
Both control boxes have integrated RF module for
remote control. Setting of automatic dry-out of
air system is possible.
20-0314 - 3 functions on/off plus 1 variable
function and heater outlet - designed for customization
The 4 function control box can be used in the
same manner as the 3 function control box.
However, you now have 1 extra outlet which can
be used for e.g. regulation of the venturi via a solenoid valve (instead of an air control), water inlet
or any other feature you prefer on your system.
Options
You can use the following options with our Classic Line controls
Round touches
RF remote control
*only for Classic Line on/off
Oval touches
LED buttons
Balboa Water Group | Your Single Source Supplier

Similar documents

HydroAir vs. FluidAir pressure mapping Pressure mapping

HydroAir vs. FluidAir pressure mapping Pressure mapping Pressure mapping is an objective means of capturing pressure distribution across a given surface. This capture gives a visual image, as well as several numeric values. In order to show equivalence ...

More information