Complete Product Overview - Drive Lines Technologies Ltd

Application Advice
Contact us if you would like to discuss an
application with a sales engineer or would
like a site visit.
Component Application
Examples
We represent the following manufacturers in
the UK and Ireland:
ADE-Werk GmbH
Automation & Gears GmbH
MS Graessner GmbH & Co KG
Grob Antriebstechnik GmbH
Heid Antriebstechnick GmbH
IMS Gear GmbH
LM76 Linear Motion Bearings
R+W Antriebselemente GmbH
USAutomation
Wörner Automatisierungstechnik GmbH
Zimmer Group GmbH
ZF Maschinenantriebe GmbH
Vertical Personnel
Platform
DriveLines
Power Transmission Solutions
Drive Lines Technologies Ltd
45 Murdock Road
Bedford
MK41 7PQ
United Kingdom
Flexographic Printing Press
Tel: +44 (0)1234 360689
Fax: +44 (0)1234 345673
Email: sales@drivelines.co.uk
Q
QUALITY
ASSURED
BS EN ISO 9001
QUA Y AUDIT UK LT D
ASCB(E)
Accrediting
Certifying
Bodies.
www.drivelines.co.uk
©2015 Drive Lines Technologies
2001/1
2015/5
Radio Telescope
See our website for further information on these
applications
oluti
P o w e r Tr a n s m i s s i o n S
ons
Turning challenges
into solutions...
Separating Stops
BRAKES/CLUTCHES
Established in 1985, we are specialist providers of power transmission
solutions and are proud to serve market leaders in many machinery disciplines.
Damped and Undamped Separating Stops;
Electrical Stops; Position Sensors
We aim to provide high quality, reliable and cost effective solutions. A strong
service ethos and product excellence is at the heart of our success.
Woerner Separating Stops for Automated Handling
Hysteresis Tension Control; Holding
Brakes; Electromagnetic Replacement
Clutches and Brakes
We are an independent company, approved to BS EN ISO 9001:2008,
representing a number of manufacturers from across the world within the
mechanical power transmission industry in Great Britain and Ireland.
Automation and Mechanical Handling
Machine Tools
Infrastructure equipment
Automotive, rail, marine and aerospace support systems
Printing
A range of pneumatically or electrically operated stops
employed widely in automated systems for the controlled
stopping and spacing of components and assemblies.
Using atmospheric air as the damping medium
Woerner Damped stops can be precisely tuned to suit
any load and situation.
Available in stopping force values from 1 kg up to a few
tonnes, these compact and adaptable units are simply
incorporated in both existing and new equipment.
Units can be both single and double acting, damped
and undamped.
Units can be grouped to provide for queuing and
there are anti- bounce variants.
Nuclear and Defence
www.drivelines.co.uk
A comprehensive range of position and presence
sensing accessories allow simple interfacing with
digital controls
Damping values can be simply adjusted
The hysteresis tension control brakes and clutches
together with the ERM control unit, provide exact
control of tensile forces in manufacturing of endless
products such as wire, cable, paper and foil.
The non-contact, continuously variable torque
transmission results in wear and maintenance free
operation.
We can supply a full range of replacement brakes
and clutches – electromagnetic, permanent magnet,
multiple disc, single disc, toothed from original and
equivalent manufacturers when the originals are no
longer available.
Spare discs and current supply brushes are also
supplied.
Tension control from 0.08 to 520 Nm
Non-contact, wear free
Slip power up to 2000 W
Replacements for obsolete brakes and clutches
Damped & undamped
Spares supply
Pneumatic & electrically actuated
Simple installation
Compatible with modular conveyor & handling
systems
sales@drivelines.co.uk
T: 01234 360689
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
7
Turning challenges
into solutions...
Separating Stops
BRAKES/CLUTCHES
Established in 1985, we are specialist providers of power transmission
solutions and are proud to serve market leaders in many machinery disciplines.
Damped and Undamped Separating Stops;
Electrical Stops; Position Sensors
We aim to provide high quality, reliable and cost effective solutions. A strong
service ethos and product excellence is at the heart of our success.
Woerner Separating Stops for Automated Handling
Hysteresis Tension Control; Holding
Brakes; Electromagnetic Replacement
Clutches and Brakes
We are an independent company, approved to BS EN ISO 9001:2008,
representing a number of manufacturers from across the world within the
mechanical power transmission industry in Great Britain and Ireland.
Automation and Mechanical Handling
Machine Tools
Infrastructure equipment
Automotive, rail, marine and aerospace support systems
Printing
A range of pneumatically or electrically operated stops
employed widely in automated systems for the controlled
stopping and spacing of components and assemblies.
Using atmospheric air as the damping medium
Woerner Damped stops can be precisely tuned to suit
any load and situation.
Available in stopping force values from 1 kg up to a few
tonnes, these compact and adaptable units are simply
incorporated in both existing and new equipment.
Units can be both single and double acting, damped
and undamped.
Units can be grouped to provide for queuing and
there are anti- bounce variants.
Nuclear and Defence
www.drivelines.co.uk
A comprehensive range of position and presence
sensing accessories allow simple interfacing with
digital controls
Damping values can be simply adjusted
The hysteresis tension control brakes and clutches
together with the ERM control unit, provide exact
control of tensile forces in manufacturing of endless
products such as wire, cable, paper and foil.
The non-contact, continuously variable torque
transmission results in wear and maintenance free
operation.
We can supply a full range of replacement brakes
and clutches – electromagnetic, permanent magnet,
multiple disc, single disc, toothed from original and
equivalent manufacturers when the originals are no
longer available.
Spare discs and current supply brushes are also
supplied.
Tension control from 0.08 to 520 Nm
Non-contact, wear free
Slip power up to 2000 W
Replacements for obsolete brakes and clutches
Damped & undamped
Spares supply
Pneumatic & electrically actuated
Simple installation
Compatible with modular conveyor & handling
systems
sales@drivelines.co.uk
T: 01234 360689
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
7
POW NEW
ER G
EAR
The
H
ighS
pee
Couplings/
Line Shafts
Torque Limiters
Gearboxes
Bellows; Miniature Bellows; Elastomer;
Disc Pack Couplings & Line Shafts
Bellows & Elastomer Safety Couplings;
High Torque; Ultra Light Torque Limiters
Planetary; Right-Angle; Worm; Helical Gear; Bevel and 2 Speed
Spindle Drives
Metal Bellows Couplings offer precise transmission
of motion and torque. They are designed for highly
dynamic servo applications to compensate for shaft
misalignment and are torsionally stiff and maintenance
free.
The range of compact, classic safety couplings
provide precise overload protection for direct and
indirect drives.
We provide planetary and right angle gearboxes for virtually any general purpose
or servo drive application.
Servomax Elastomer Couplings eliminate vibrations,
are electrically insulating and provide an economical,
easy to use solution to shaft misalignment.
Fixed and adjustable length line shafts are available
up to 6 metres in length. Ideal for transmitting motion
and torque over long distances such as in screw jack
lift systems.
A series of torsionally stiff disc pack couplings, both
single and double flex design complete the product range
Backlash free
Compensation of misalignment
High torque versions up to 100,000 Nm
Speeds up to 120,000 rpm
Various shaft connections
Low moment of inertia
Easy assembly / disassembly
Stainless steel & ATEX versions
High torque applications are catered for by the rugged
Torqset® series which are supplied with individual
torque modules, the number of which can be varied at
a later date to alter the torque range.
A hydraulically operated automatic re-engagement
version is now available.
With the use of special materials, the new ultra light
range offers high torque overload protection with low
inertia & compact design.
Backlash free
Compensation for misalignment
Single or multi-position re-engagement, load
holding or full-disengagement
Torque up to 700,000 Nm
Various shaft connections
6
sales@drivelines.co.uk
For general applications requiring angular torque transfer a range of versatile
bevel gearboxes offer a perfect solution.
Our 2 speed main spindle drives remove the need for costly machine tool control
systems.
General purpose planetary gearboxes up to 300Nm
Low noise operation
Servo planetary gearboxes with high precision backlash reduction up to
3000 Nm
Servo worm and bevel gear right-angle gearboxes up to 7833 Nm
General purpose bevel gearboxes up to 7000 Nm
Adjustable torque setting
*
www.drivelines.co.uk
T: 01234 360689
ear
box
Right angle gearboxes for servo drives are also catered for with worm and bevel
gear options.
Bespoke servo drive solutions
Balancing grade G = 2.5 available
eve
lg
Our general purpose planetary gearboxes are available in literally thousands of
torque, size and speed combinations. Precision planetary gearboxes with torque
ratings up to 300 Nm are used in automation engineering.
Pre-set disengagement torque
ATEX versions
db
2 speed gear boxes for main spindle drives
Also available – Oil & water coolers
up to 60,000 Btu/h
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
3
HS
POW NEW
ER G
EAR
The
H
ighS
pee
Couplings/
Line Shafts
Torque Limiters
Gearboxes
Bellows; Miniature Bellows; Elastomer;
Disc Pack Couplings & Line Shafts
Bellows & Elastomer Safety Couplings;
High Torque; Ultra Light Torque Limiters
Planetary; Right-Angle; Worm; Helical Gear; Bevel and 2 Speed
Spindle Drives
Metal Bellows Couplings offer precise transmission
of motion and torque. They are designed for highly
dynamic servo applications to compensate for shaft
misalignment and are torsionally stiff and maintenance
free.
The range of compact, classic safety couplings
provide precise overload protection for direct and
indirect drives.
We provide planetary and right angle gearboxes for virtually any general purpose
or servo drive application.
Servomax Elastomer Couplings eliminate vibrations,
are electrically insulating and provide an economical,
easy to use solution to shaft misalignment.
Fixed and adjustable length line shafts are available
up to 6 metres in length. Ideal for transmitting motion
and torque over long distances such as in screw jack
lift systems.
A series of torsionally stiff disc pack couplings, both
single and double flex design complete the product range
Backlash free
Compensation of misalignment
High torque versions up to 100,000 Nm
Speeds up to 120,000 rpm
Various shaft connections
Low moment of inertia
Easy assembly / disassembly
Stainless steel & ATEX versions
High torque applications are catered for by the rugged
Torqset® series which are supplied with individual
torque modules, the number of which can be varied at
a later date to alter the torque range.
A hydraulically operated automatic re-engagement
version is now available.
With the use of special materials, the new ultra light
range offers high torque overload protection with low
inertia & compact design.
Backlash free
Compensation for misalignment
Single or multi-position re-engagement, load
holding or full-disengagement
Torque up to 700,000 Nm
Various shaft connections
6
sales@drivelines.co.uk
For general applications requiring angular torque transfer a range of versatile
bevel gearboxes offer a perfect solution.
Our 2 speed main spindle drives remove the need for costly machine tool control
systems.
General purpose planetary gearboxes up to 300Nm
Low noise operation
Servo planetary gearboxes with high precision backlash reduction up to
3000 Nm
Servo worm and bevel gear right-angle gearboxes up to 7833 Nm
General purpose bevel gearboxes up to 7000 Nm
Adjustable torque setting
*
www.drivelines.co.uk
T: 01234 360689
ear
box
Right angle gearboxes for servo drives are also catered for with worm and bevel
gear options.
Bespoke servo drive solutions
Balancing grade G = 2.5 available
eve
lg
Our general purpose planetary gearboxes are available in literally thousands of
torque, size and speed combinations. Precision planetary gearboxes with torque
ratings up to 300 Nm are used in automation engineering.
Pre-set disengagement torque
ATEX versions
db
2 speed gear boxes for main spindle drives
Also available – Oil & water coolers
up to 60,000 Btu/h
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
3
HS
Linear Actuators
Linear Guidance
Screw Jacks
Standard Industrial Light & Heavy Duty
ranges; Bespoke Actuators for Hydraulic
Steelwork applications
Linear Ball Guides; Combined Bearings;
Ball and Plain Bushings, Ball Screws, Linear
Positioning & Step Motors
Cubic; Single Face; Trapezoidal Spindle; Ball Screw Spindle; High
Speed; Linear Actuators
The standard range covers everything from light
duty actuators for building technology to heavy duty
cylinders for industrial applications up to 100 tonne.
The Drive Lines range of linear products covers all
areas of linear guidance whatever your application.
attitude independant of other equipment and have a
A specialist area of application is the supply of
actuators for navigation channels and sluice gate
operations under the ‘Hydraulic Steelwork’ umbrella.
The solution is widely used in mainland Europe due to
the many environmental advantages.
Bespoke solutions for Waterway management
applications
Environmentally friendly alternative to hydraulic
actuators
Low maintenance and operating costs
Long lifespan
Low noise
Our linear ball guides and ball screws provide low
cost precision linear motion for machine tools, tooling
and automation equipment. Combined bearings cater
for heavy load mechanical handling up to 40 kN per
bearing.
Ball bushings and LM76 plain bushings offer a wide
range of round shaft solutions including self lube /
food environment suitable bearings.
We also provide precision miniature linear stages.
A comprehensive range of screw jacks supplied singly or as full motorized systems.
solution for controlled lifting, lowering and slewing and are available with many
accessories to achieve a truly customised package.
For higher loads our classic single face jacks up to 2000 kN offer plenty of scope.
options.
Alternative materials, surface treatments and paint systems are available for use in
harsh environments.
Rotating screw version with travelling nut
Translating screw version with rotation prevention
Size interchangeable linear ball guides and any
length up to 4 meters
Cubic or single face designs
Combined bearings and steel channel up to
40 kN per bearing
Worm and wheel or spiral bevel gear sets
Ball screw options
Cost effective Japanese and European standard
metric ball bushings
Wide range of accessories
environments
Hard coat anodize coating and stainless for food processing
Hand, pneumatic & hydraulic clamping and
braking elements for linear guides and round
shafts
Special Lithogrease available to order with purchase
Driven Micro stages and lead screw step motors
for versatile and precision linear positioning
Unique worm wheel encoder for absolute positioning
Light and medium duty Linear Actuators for a wide range of applications
Standard IEC Motors; Control Systems;
Compact range of rolled or ground ball screws
fully machined to customer drawing
Also available 3 phase IE1 & IE2, Single phase and ATEX explosion proof motors
built to ISO 9001, IEC, DIN, EN & BS Standard.
4
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
5
Linear Actuators
Linear Guidance
Screw Jacks
Standard Industrial Light & Heavy Duty
ranges; Bespoke Actuators for Hydraulic
Steelwork applications
Linear Ball Guides; Combined Bearings;
Ball and Plain Bushings, Ball Screws, Linear
Positioning & Step Motors
Cubic; Single Face; Trapezoidal Spindle; Ball Screw Spindle; High
Speed; Linear Actuators
The standard range covers everything from light
duty actuators for building technology to heavy duty
cylinders for industrial applications up to 100 tonne.
The Drive Lines range of linear products covers all
areas of linear guidance whatever your application.
attitude independant of other equipment and have a
A specialist area of application is the supply of
actuators for navigation channels and sluice gate
operations under the ‘Hydraulic Steelwork’ umbrella.
The solution is widely used in mainland Europe due to
the many environmental advantages.
Bespoke solutions for Waterway management
applications
Environmentally friendly alternative to hydraulic
actuators
Low maintenance and operating costs
Long lifespan
Low noise
Our linear ball guides and ball screws provide low
cost precision linear motion for machine tools, tooling
and automation equipment. Combined bearings cater
for heavy load mechanical handling up to 40 kN per
bearing.
Ball bushings and LM76 plain bushings offer a wide
range of round shaft solutions including self lube /
food environment suitable bearings.
We also provide precision miniature linear stages.
A comprehensive range of screw jacks supplied singly or as full motorized systems.
solution for controlled lifting, lowering and slewing and are available with many
accessories to achieve a truly customised package.
For higher loads our classic single face jacks up to 2000 kN offer plenty of scope.
options.
Alternative materials, surface treatments and paint systems are available for use in
harsh environments.
Rotating screw version with travelling nut
Translating screw version with rotation prevention
Size interchangeable linear ball guides and any
length up to 4 meters
Cubic or single face designs
Combined bearings and steel channel up to
40 kN per bearing
Worm and wheel or spiral bevel gear sets
Ball screw options
Cost effective Japanese and European standard
metric ball bushings
Wide range of accessories
environments
Hard coat anodize coating and stainless for food processing
Hand, pneumatic & hydraulic clamping and
braking elements for linear guides and round
shafts
Special Lithogrease available to order with purchase
Driven Micro stages and lead screw step motors
for versatile and precision linear positioning
Unique worm wheel encoder for absolute positioning
Light and medium duty Linear Actuators for a wide range of applications
Standard IEC Motors; Control Systems;
Compact range of rolled or ground ball screws
fully machined to customer drawing
Also available 3 phase IE1 & IE2, Single phase and ATEX explosion proof motors
built to ISO 9001, IEC, DIN, EN & BS Standard.
4
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
sales@drivelines.co.uk
www.drivelines.co.uk
T: 01234 360689
5
Application Advice
Contact us if you would like to discuss an
application with a sales engineer or would
like a site visit.
Component Application
Examples
We represent the following manufacturers in
the UK and Ireland:
ADE-Werk GmbH
Automation & Gears GmbH
MS Graessner GmbH & Co KG
Grob Antriebstechnik GmbH
Heid Antriebstechnick GmbH
IMS Gear GmbH
LM76 Linear Motion Bearings
R+W Antriebselemente GmbH
USAutomation
Wörner Automatisierungstechnik GmbH
Zimmer Group GmbH
ZF Maschinenantriebe GmbH
Vertical Personnel
Platform
DriveLines
Power Transmission Solutions
Drive Lines Technologies Ltd
45 Murdock Road
Bedford
MK41 7PQ
United Kingdom
Flexographic Printing Press
Tel: +44 (0)1234 360689
Fax: +44 (0)1234 345673
Email: sales@drivelines.co.uk
Q
QUALITY
ASSURED
BS EN ISO 9001
QUA Y AUDIT UK LT D
ASCB(E)
Accrediting
Certifying
Bodies.
www.drivelines.co.uk
©2015 Drive Lines Technologies
2001/1
2015/5
Radio Telescope
See our website for further information on these
applications
oluti
P o w e r Tr a n s m i s s i o n S
ons