kitchen organizers - Spokane Hardware Supply, Inc.
Transcription
kitchen organizers - Spokane Hardware Supply, Inc.
To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Hidden waste containers, pull out organizers, pantry storage with soft close too. Our selection of kitchen organizers can turn a basic kitchen from drab to fab with just a few convenient upgrades! Kitchen Organizers...................177-216 Waste and Recycling Containers........... 177-183 Sensomatic Assisted Opening System........................................ 183 Woven Pull Out Baskets.................................. 187 Wall / Upper Cabinet Organizers................... 188 Wood Breadboards & Slides........................... 214 Mixer Lifts.................................................. 214-215 Pull-Out Towel Bars.......................................... 215 Undersink Drip Trays....................................... 216 Cabinet Louver / Ventilator....................216, 248 Lazy Susans / Corner Cabinetry............. 189-198 Lazy Susan Hardware and Swivel Bearings....................... 189-190 Full Circle Lazy Susans.............................................................. 190-193 D-Shape Lazy Susans......................................................................... 193 Kidney Lazy Susans................................................................... 194-195 Pie-Cut Lazy Susans............................................................................ 196 Blind Corner Lazy Susans........................................................ 197-198 Pantry Organizers / Blind Corner........... 197-200 Waste and Recycling Containers Base & Pull Out Organizers..................... 184-187 Wood Tambour and Track Systems....... 212-213 Door Storage and Spice Racks............... 201-202 Drawer Organizers / Cutlery Trays......... 202-205 Sink Front Tip Out Trays.......................... 205-208 Tip Out/False Front Tray Hinges............................................ 205-208 False Front Tray Clips.......................................................................... 208 Tray Dividers...................................................... 209 Wine, Stemware and Plate Racks........... 210-211 Appliance Garages........................................... 212 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 177 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Waste and Recycling Containers Waste Container Lid Vibo Series Pull-Out Waste Containers Vibo Series New Item! • A practical lid with dishwasher safe anti-smell filter. • For use with Salice Vibo waste containers. • Gray/Silver. • 1/box. Sold individually. New Item! • Soft-close, full-extension slides; bottom mount. • Patented door-mount bracket system has 3 way adjustability for alignment of the cabinet door. Vertical, lateral and frontal adjustment. • Waste container equipped with handle to keep your bag inside and lift cans up. • 100% made in Italy. • Silver gray bins & chrome hardware. • 1/box. Sold individually. Width Depth Height QPAM12135C 1/35 Qt. Product # Bins/Quarts 12” 19-5/8” 21-7/8” QPAM15228C 2/32 Qt. 15” 19-5/8” 21-7/8” QPAM18228C 2/32 Qt. 18” 21-5/16” 20-5/16” QPAM21235C 2/35 Qt. 21” 21-5/16” 20-5/16” Product # Description Width Depth QPCOLAMF for 32 Qt. 8-5/8” 14-3/8” QPCOXLMF for 35 Qt. 8-5/8” 17-1/4” Waste Container Further Bins Vibo Series New Item! Waste and Recycling Containers • Salice Vibo “Further Bins” can be put inside the principal bins on waste container units or also used externally attached to the cabinet door. • Silver gray polystyrene bins with small handle. • 1/box. Sold individually. Replacement Waste Container Bins Vibo Series Product # Bins/Quarts Width Depth Height QPAM03C 1/3.2 Qt. 7-23/32” 7-7/8” 3-9/16” QPAM05C 1/5.3 Qt. 7-23/32” 7-7/8” 7-3/32” New Item! • Waste container equipped with handles for easy gripping and fixing the bag along the perimeter of the bin. • Silver gray polystyrene. • 1/box. Sold individually. 178 Product # Size Height Width Depth QPAM128C 32 Qt. 18-1/8” 8-5/8” 14-3/8” QPAM135C 35 Qt. 18-1/8” 8-5/8” 17-1/4” TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Undermount Waste Containers Door Mount Waste Containers • Heavy-duty undermount slides with soft-close technology. • Unique, washable solid backsplash and floor for easy cleaning. • Concealed slide hardware. • Optional decorative rail accents may be customized to match countertops. • Optional lids fit securely and hold bags in place • Installs in minutes with self-aligning brackets and only four screws. • New door mount brackets accommodate overlay or inset doors. • 1/box. Sold individually. • Features Rev-A-Motion™ Soft-Open/Soft-Close slide technology that provides smooth operation even under the heaviest of loads. • Easy to clean durable molded base. • Made in the USA. • Adjustable door mount brackets fits all door types and allows tilt and skew. • Silver bins with aluminum hardware. • 1/box. Sold individually. USC Series 5149 Series Width Depth Height Color Product # Bins/ Size Depth Height Min. Opening Frameless USC12-1-50WH 1/50 Qt. 12” 22-7/16” 23-5/16” White 5149-15DM-117 1/35 Qt. 12-1/8” 22” 19-1/2” 12-1/4”W USC15-2-35PT 2/35 Qt. 14-13/16” 22-5/8” 19-5/16” Silver 5149-15DM18-117 1/35 Qt. 12-1/8” 18” 19-1/2” 12-1/4”W USC18-2-50PT 2/50 Qt. 15-3/8” 23-1/4” Silver 5149-1550DM-117 1/50 Qt. 12-1/8” 22” 23-1/2” 12-1/4”W 5149-1527DM-217 2/27 Qt. 12-1/8” 22” 19-1/2” 12-1/4”W 5149-18DM-217 2/35 Qt. 14-3/16” 22” 19-1/2” 14-1/2”W 5149-2150DM-217 2/50 Qt. 15-5/8” 23-1/2” 15-3/4”W Product # Bins/ Quarts 22-7/16” Waste Container Lid Only USC Series Width 22” 5349 Series • For use with the Knape and Vogt Series 35qt. waste containers (sold separately). • Conceals waste and traps odors inside the waste bin. • Lid adds 3/4” (19mm) to bin height. • 1/box. Sold individually. Product # Description Color QT35LB-PT for 35 Qt. Silver • Heavy-duty brushed aluminum soft-closing slides provide exceptional support and stability eliminating side-to-side movement and a fully adjustable 10” H door mount frame. • White bins with aluminum hardware. • Built-in rear storage area for bags on single container units. • 1/box. Sold individually. TEL 509.535.1663 TOLL-FREE Product # Bins/Size Width Depth Height 5349-15DM-1 1/35 Qt. 10-3/4” 21-15/16” 19-1/4” 5349-1550DM-1 1/50 Qt. 10-3/4” 21-15/16” 23-1/8” 5349-18DM-2 2/35 Qt. 14-13/16” 21-7/8” 19-1/4” 5349-1527DM-2 2/27 Qt. 11-11/16” 22-1/4” 18-15/16” 5349-2150DM-2 2/50 Qt. 14-13/16” 22-1/8” 22-1/8” 800.888.1663 www.spokanehardware.com Waste and Recycling Containers Door Mount Waste Containers 179 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Door Mount Extender Kit Top Mount Soft-Close Waste Container 5349 Series 4WCTM-BBSC Series • Designed for Rev-A-Shelf’s 5349 Series aluminum frame pull-outs. • Made to be used on a product that might fall in a thin, delicate, or seamed area of the cabinet door. • Attaches to the existing door bracket for extended mounting adjustability for any cabinet door style where previously a sub-door might have been required. • Allows for 3/4” to 2-1/2” of adjustment per side. • 1/box. Sold individually. Product # Finish 5345-DM-KIT-1 Chrome Bottom Door Mount Waste Containers 4WC Series • 1-1/2” over-travel soft-close ball-bearing slides. • Single 35qt. includes rear polymer storage bin. • Innovative floating rear bracket ensures soft-close functionality even when your cabinet wood swells or shrinks. • Pre-assembled door mounting brackets. • Silver bins. • 1/box. Sold individually. Product # Bins/Size Width Depth Height 4WCTM-12BBSCDM-1 1/35 Qt. 12” 22-3/4” 17-7/8” 4WCTM-1550BBSCDM1 1/50 Qt. 12” 23-1/4” 21-3/4” 4WCTM-15BBSCDM-2 2/27 Qt. 12” 23-1/4” 17-3/4” 4WCTM-18BBSCDM-2 2/35 Qt. 15” 22-3/4” 17-7/8” 4WCTM-2150BBSCDM2 2/50 Qt. 18” 23-1/4” 21-3/4” Top Door Mount Waste Containers 4WCTM Series Waste and Recycling Containers 180 • Solid maple construction. Containers encased in a durable wood base to allow easy retrieval of the waste bins • Features 150lb. full-extension, ball bearing slides with pre-assembled door mount brackets. • White bins. • 1/box. Sold individually. Product # Bins/Size Width Depth Height 4WC-15DM-1 1/35 Qt. 11-1/4” 21-3/4” 19-1/4” 4WC-18DM-2 2/27 Qt. 14-1/4” 21-3/4” 19-1/4” TEL 509.535.1663 TOLL-FREE • Designed for 1-1/2” face frame cabinets. • Solid maple construction. • 1-1/2” over-travel ball-bearing slides. • Single container units include rear polymer storage bin. • Adjustable rear brackets for cabinet depth variations. • Pre-assembled door mounting brackets. • White bins. • 1/box. Sold individually. Product # Bins/Size Width Depth Height 4WCTM-12DM-1 1/35 Qt. 12” 22-3/4” 17-7/8” 4WCTM-1550DM-1 1/50 Qt. 12” 23-1/4” 21-3/4” 4WCTM-15DM-2 2/27 Qt. 12” 23-1/4” 17-3/4” 4WCTM-18DM-2 2/35 Qt. 15” 22-1/2” 17-7/8” 4WCTM-2150DM-2 2/50 Qt. 18” 23-1/4” 21-3/4” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Quad Recycle Center Recycle Center w/Soft-Close • Designed for 1-1/2” face frame cabinets. • Solid maple construction. • 1-1/2” over-travel ball-bearing slides. • Adjustable rear brackets for cabinet depth variations. • Pre-assembled door mounting brackets. • White bins. • 1/box. Sold individually. • Beautiful chrome frame, white bins. • Features full-extension soft-close ball-bearing slides. • Removable containers for easy cleaning. • Includes door mount brackets for attaching your own door. • Set Contents: 3 - 25qt. polymer containers, 1 canvas bag, full extension 150lb. slides, door adjustment mechanism; spring loaded self closing feature. • 1/box. Sold individually. 4WCTM Series Product # Bins/Size 4WCTM-27-4 4/27 Qt. 5BBSC Series Width Depth Height 24” 23-1/4” 18” Spacer Kit For Face Frame Applications Product # Width Depth Height 5BBSC-WMDM24-W 20” 22-1/4” 20-1/4” Recycling Center 4WCTM Series PRC24 Series Product # 4WCTM-SP-KIT • Features KV heavy-duty ball-bearing slides. • Slides assembly: 23-3/8”W,. • 25lbs. max per bin, not intended for bulk storage. • White bins and hardware. • 1/box. Sold individually. TEL 509.535.1663 TOLL-FREE Product # Bins/Size Width Depth Height PRC24-4-27-W 4/27 Qt. 24” 23” 19” 800.888.1663 www.spokanehardware.com Waste and Recycling Containers • For use with Rev-A-Shelf 4WCTM Waste containers. • Used in face frame applications, for custom installations it will add up to 1-1/2” (38mm) of width. • 1/box. Sold individually. 181 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Single Pull-Out Waste Containers Heavy-Duty RV Door Mount Kit RV Series RV Series • Sturdy wire support structure and high quality vinyl coating. • 3/4 or full-extension polymer bearing slide assembly; S-suffix denotes full extension slides. • Fully assembled for ease in installation. • White bins and hardware. • 1/box. Sold individually. • Door Mounting Kit for Rev-A-Shelf RV Series/HPRV/HRV Hampers. • Six-way adjustable door mounting bracket for easy installation and simple job site adjustments. • Includes a complete set of brackets, fasteners and spacers for installation on any door style. • White finish. • 1/box. Sold individually. Product # Description Product # Bins/Size Width Depth Height RV-DM-KIT Door Mount Kit RV-814PB 1/20 Qt. 8-1/2” 14-5/8” 16-5/8” RV-EURO-ADAPTOR Adapter for RV-814PB RV-9PB 1/30 Qt. 9-1/2” 22” 19-1/4” RV-12PB 1/35 Qt. 10-5/8” 22” 19” RV-12PB-L 1/35 Qt. 10-5/8” 22” 20-3/8” RV-12PB-50-S 1/50 Qt. 10-3/4” 22” 24-1/4” RV-14PB-S 1/20 Qt. 14-5/8” 16” 16-3/8” RV-18PB-1 1/35 Qt. 14-3/8” 22” 19-1/4” Waste Container Lids RV Series Double Pull-Out Waste Containers RV Series Waste and Recycling Containers 182 • Rev-A-Shelf flip-up lids for the most popular waste containers. • Will add 1” to the height of product you are using. Be sure to take this dimension into account when measuring your cabinet. • 1/box. Sold individually. • Sturdy wire support structure and high quality vinyl coating. • Full-extension polymer bearing slide assembly. • Fully assembled for ease in installation. • White bins and hardware. • 1/box. Sold individually. Product # Bins/Size Width Depth Height RV-15PB-2S 2/27 Qt. 11-13/16” 22-1/4” 19-1/8” RV-18PB-2S 2/35 Qt. 14-3/8” 22” 19-1/4” TEL 509.535.1663 TOLL-FREE Product # Description Color RV-35-LID-1 for 35 Qt. White RV-35-LID-17-1 for 35 Qt. Silver RV-50-LID-1 for 50 Qt. White RV-50-LID-17-1 for 50 Qt. Silver 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Replacement Waste Container Bins Pivot-Out Waste Container 8-010 Series • Replacement bins for Rev-A-Shelf waste containers. • Finish: White. • 1/box. Sold individually. Product # Size Use with Height Width Depth 6700-61-52 30 Qt. 9-1/2” 15-3/8” 27 Qt. 17-3/4” 11-3/8” 11-3/8” RV-20-52 20 Qt. 15” 8-1/8” 14-1/4” RV-35-52 35 Qt. 17-7/8” 14-3/8” 10-1/2” RV-50-52 50 Qt, RV-9 RV-15, 4WCTM-15, 4WCTM-27 RV-8, RV-14 RV-12, RV-18, 5149, 4WCTM RV, 4WCTM, 5149, 5349 18” RV-1024W-52 21-3/4” 10-3/4” 14-3/4” Undersink Mount Waste Containers 8-785 Series The pivot out waste container is ideal for keeping garbage out-of-sight yet conveniently accessible under the kitchen or vanity sink. As the cabinet door opens, the lifting mechanism raises the lid enabling the container to pivot-out with the door • Features an inner polymer container with built-in handle for easy removal. • Designed for frameless cabinets. If using on a face frame cabinet you will need to place a spacer behind the unit. • Stainless steel bin. • Minimum Cabinet Opening: 13-3/4in.(350mm)W • 1/box. Sold individually. Product # Bin Size Width Depth Height 8-010314-15 15 Liter 11” 10-1/2” 15-3/4” Grass Sensomatic Electronic Assisted Opening System Product # Width Depth Height 8-785-30-2SS 10-1/4” 18-3/4” 15-3/16” 8-785-30-DM2SS 10-1/4” 18-3/4” 15-3/16” Grass Sensomatic electronically-assisted opening mechanism for waste bin application. With the touch-sensitive Sensomatic device all you need is a gentle touch anywhere on the front of the drawer to automatically open the drawers. The action is steady, precise and ingenious. Waste and Recycling Containers • Ideal for kitchen, vanity and wet bar sink base cabinets, fits conveniently in the limited spaces around existing plumbing. • Features two separate stainless steel containers (one 10 liter and one 20 liter bin), a covered lid, built-in handles for easy removal and 75lb. fullextension ball bearing slides. • Brushed stainless steel bins. • Minimum Cabinet Opening: 12” (305mm)W. • 1/box. Sold individually. • Set includes: (1) Opening unit, (1) Base frame, (1) Power supply unit, (1) Power cord: (4) Front bumpers (F121100296223). • Can be used with the Grass DWD-XP drawer systems, Rev-A-Shelf 5149/5349 Series Waste Pull-Outs and Blum Tandum. • Opening system only, Pull-Out Waste bins not included. • 1 set/box. Sold per set. Product # F121100698201 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 183 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Base Organizers and Pull Out Baskets Base Cabinet Filler Organizer 432 Series - Wood Classics Pull-Out Base Organizer with Soft Close 448 Series - Wood Classics • Concealed, Blumotion soft-close slide design. • Adjustable rear wall that prevents items from falling behind the pullout. • Adjustable shelves with chrome rails. • Micro-adjustment screw for precise door alignment. • Adjustable door mount brackets provide up to 5 inches of flexibility for trouble-free installation on any door style. • Adjustable rub bushings prevents side-to-side movement. • Made from maple with a UV clear coated finish. • 1/box. Sold individually. Base Organizers and Pull Out Baskets 184 Product # Width Depth Height 448-BCSC-5C 5” 21-3/4” 25-1/2” 448-BCSC-8C 8” 21-3/4” 25-1/2” This pull-out organizer transforms decorative filler panels into functional storage space. • Adjustable shelves with chrome rails. • 100lb. full-extension, tri-slide design for complete stability and easy installation. • Made from maple with a UV clear coated finish. • 1/box. Sold individually. Product # Width Depth Height 432-BF-3C 3” 23” 30” 432-BF-6C 6” 23” 30” 432-BF-9C 9” 23” 30” KitchenMate Base Pantry Filler Pull-Out Base Organizer 448 Series - Wood Classics • Designed for full-height, face frame base cabinets. • Features adjustable shelves with chrome rails. • 100-150lb. full-extension, patented “tri-slides” for complete stability and easy installation. • Adjustable door mount brackets provide up to 5 inches of flexibility for trouble-free installation on any door style. • Made from maple with a UV clear coated finish. • 1/box. Sold individually. Product # Width Depth Height 448-BC-5C 5” 22-1/2” 25-1/2” 448-BC-8C 8” 22-1/2” 25-1/2” 448-BC-11C 11” 22-1/2” 25-1/2” TEL 509.535.1663 TOLL-FREE • Simply installs between adjacent cabinets to provide valuable storage space. • Features KV 8405 100lb heavy-duty full extension ball bearing slides with adjustable shelves. • Unique magnetic push latch, ours don’t pull out, they push in. • Solid maple and plywood construction. • 1/box. Sold individually. Product # Width Depth Height P0463MNL1 3” 22-7/8” 30” P0466MNL1 6” 22-7/8” 30” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Door Mount Kit for 5WB Baskets 5-WB1 Series 5WB Series • Ideal for organizing your valuable pots, pans and other bulky items! • Features 100lb. full-extension, ball-bearing slides and heavy-duty chrome plated frame. • Slide unit installs easily with only 4 screws. • Optional door mount brackets available. • Finish: Chrome. • 1/box. Sold individually. Product # Width Depth Height Min.Opening 5WB1-0918-CR 8-3/8” 18” 7” 8-1/2” 5WB1-1218-CR 11-3/8” 18” 7” 11-1/2” 5WB1-1220-CR 11-3/8” 20” 7” 11-1/2” 5WB1-1222-CR 11-3/8” 22” 7” 11-1/2” 5WB1-1520-CR 14-3/8” 20” 7” 14-1/2” 5WB1-1522-CR 14-3/8” 22” 7” 14-1/4” 5WB1-1822-CR 17-3/8” 22” 7” 17-1/2” 5WB1-2122-CR 20-3/8” 22” 7” 20-1/2” • This kit can be added to all Rev-A-Shelf 5WB-Series pull-out baskets to make units door mountable. • The two piece bracket allows for easy installation and simple job site adjustments. • Flexible mounting eliminates need for sub-door. • 1/box. Sold individually. Product # Finish 5WB-DMKIT Silver KITCHEN ORGANIZERS Single Pull-Out Basket Pull-Out Base Organizer 548 Series Double Pull-Out Baskets • Designed for 9” base cabinets. • Universal brackets, reversible for non-handed operation. • Ball-bearing slides and door mountable frame. • Mounting screws and spacers included for slides. • Finish: chrome. • 1/box. Sold individually. • Ideal for organizing your valuable pots, pans and other bulky items! • Features 100lb. full-extension, ball-bearing slides and heavy-duty chrome plated frame. • Slide unit installs easily with only 4 screws. • Optional door mount brackets available. • Finish: Chrome. • 1/box. Sold individually. Product # Width Depth Height Min.Opening 5WB2-0918-CR 8-3/4” 18” 19” 8-1/2” 5WB2-1218-CR 11-3/4” 18” 19” 11-1/2” 5WB2-1222-CR 11-3/4” 22” 19” 11-1/2” 5WB2-1522-CR 14-3/4” 22” 19” 14-1/2” 5WB2-1822-CR 17-3/4” 22” 19” 17-1/2” 5WB2-2122-CR 20-3/4” 22” 19” 20-1/2” TEL 509.535.1663 TOLL-FREE Product # Width Depth Height 548-06CR 5-1/2” 19-3/4” 19-1/2” 548-10CR-1 9-3/4” 16” 18” 800.888.1663 www.spokanehardware.com Base Organizers and Pull Out Baskets 5WB2 Series 185 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Wood Pull-Out Drawer Undersink Basket w/Removable Caddy • Dovetail construction and maple veneer plywood for strength and a naturally beautiful finish. • Simple installation and concealed bottom mount, 50lb, 3/4 extension euro slides. • 1/box. Sold individually. 4WDB Series - Wood Classics 544 Series Product # Width Height Depth • Adjustable handle that slides either direction to work around plumbing or other obstructions. • Reversible/removable top tray is ideal for paper towel or sponge storage. • Completely removable to take cleaning products with you. • Leak proof trays. • Finish: Chrome. • 1/box. Sold individually. 4WDB-12 11” 5-5/8” 18-1/2” 4WDB-15 14” 5-5/8” 22-1/2” Product # Width Depth Height 544-10C-1 11-1/4” 16-1/4” 19-1/2” Under Sink Basket Pull-Out Vanity Grooming Organizer USB Series Base Organizers and Pull Out Baskets 186 445 Series - Wood Classics • Features a unique, two-tier design. • Accessory top basket is non-handed, removable and offset to avoid plumbing for undersink applications. • Note: Add 3/4” (19mm) to width requirement for frameless cabinets. • Finish: White. • 1/box. Sold individually. Product # Width Depth Height USB11TM-W 12-1/8” 19-1/8” 9-5/16” USB14TM-W 15-1/8” 19-1/8” 9-5/16” TEL 509.535.1663 TOLL-FREE • Great for organizing hair dryers, curling irons and other grooming items. • 100lb. full-extension, tri-slides for complete stability and easy installation. • Includes pull-out shelving system, 2 adjustable shelves with stainless steel bins, adjustable door mount brackets, full extension tri-slides, rub bushings. • All natural wood finish. • 1/box. Sold individually. Product # Width Depth Height 445-VCG25-8 8” 19” 25-1/2” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Bottom Mount Slides for Custom Pull-Outs • Heavy-duty ball-bearing bottom mount slides. • White, 100lb. load rating. • 1 pr/box. Sold per pair. • Keeps cabinets organized and eliminates clutter. • Solid, clear maple body and 7 solid metal, custom-made hooks. • Gliding hardware designed with a 100 lb. capacity. • Weighted hooks and synchronized motion keeps cookware quiet. • Designed to fit any standard depth cabinet - installation in a full height cabinet is recommended to hang larger cookware. • Top of unit to bottom of hooks: 5”. • Rear mounting bracket (for face frame installation) will add 3/4” to overall length. • Lifetime Warranty. • 1/box. Sold individually. Product # Length Width Height Finish GLDWR7HK 22” 4-1/4” 3” Clear Maple Product # Length BM-3832-18W-52 18” BM-3832-20W-52 20” BM-3832-22W-52 22” KITCHEN ORGANIZERS Glideware Pull-Out Rack with Hooks Wicker/Rattan Pull Out Baskets Rev-A-Shelf Woven Basket with Rails Hooks for Glideware Product # Finish GLDWR2HK Satin Nickel Bring a natural look to your design with beautiful woven baskets. Perfect for storing fruit, vegetables and much more! • Machine washable canvas liner. • Baskets secured within a natural maple frame, complete with built-in handles. • Set Contents: 1 woven basket, 1 canvas liner, and 2 side mount rails. • Rail width is trimmable to fit various openings. Offered in standard and euro sizes. • 1/box. Sold individually. TEL 509.535.1663 TOLL-FREE Product # Width 4WV-15I 14-1/2” to 12-1/4” 21-1/4” 7-3/8” 4WV-18I 17-1/2” to 15-1/4” 21-1/4” 7-3/8” 4WV-320I 14-1/8” to 13-5/8” 17-3/4” 7-11/16” 4WV-420I 18-1/8” to 17-1/2” 17-3/4” 7-11/16” 4WV-520I 22-1/8” to 22-1/2” 17-3/4” 7-11/16” 800.888.1663 Depth Wicker/Rattan Pull Out Baskets • Solid metal, custom-made, weighted hooks designed to fit the Glideware Racks. • 1 pr/box. Sold per pair. Height www.spokanehardware.com 187 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Wall/Upper Cabinet Organizers KitchenMate Wall Pantry Filler Wall Pull-Out Shelving System 448-WC Series - Wood Classics • Designed for installation in wall 9” & 12” cabinets. • Up to 5 shelf surface areas by utilizing the top of the unit to provide another shelf in taller 36” or 42” applications. • Patented door mount brackets provide up to 5” of flexibility for installation on any door style. • Made from maple with UV clear coat. • Set Includes: Pull-out shelving system, 3 adjustable shelves with chrome rails, 100lb. full-extension, tri-slides. • 1 set/box. Sold per set. Product # Width Depth Height 448-WC-05C 5” 10-3/4” 26-1/4” 448-WC-08C 8” 10-3/4” 26-1/4” • Simply installs between adjacent cabinets to provide valuable storage space. • Features KV 8405 100lb heavy-duty full extension ball bearing slides with adjustable shelves. • Unique magnetic push latch, ours don’t pull out, they push in. • Solid maple and plywood construction. • 1 set/box. Sold per set. Product # Width Depth Height P0473MNL1 3” 12” 30” P0476MNL1 6” 12” 30” Pull-Down Shelving System 5PD Series - Premiere Chrome Wall Filler Cabinet Organizer Wall/Upper Cabinet Organizers 432 Series - Wood Classics • Designed to be installed between two cabinets, only the face must be added. • Made from maple with UV clear coat. • Set Includes: 1 organizer with 100lb. full-extension tri-slides and adjustable shelves with chrome rails. • 1 set/box. Sold per set. 188 Product # Width Depth Height 432-WF-3C 3” 11-1/8” 30” 432-WF-6C 6” 11-1/8” 30” TEL 509.535.1663 TOLL-FREE • Two-tier pull-down shelf that brings hard-to-reach items down 10” while pulling out 16-3/4” from the cabinet. • Gas assisted lifting/lowering mechanism provides stability • Locking arm holds shelf in down position for complete accessibility. • Sleek, chrome plated wire design. • Side and bottom mount brackets. • 1 set/box. Sold per set. Product # Width Height Depth 5PD-24CRN 22-1/4” 18-5/16” 10-3/8” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Lazy Susan Pivot Hardware Lazy Susan Hardware and Swivel Bearings for Custom Wood Shelves Lazy Susan Turntable Swivels • Ball bearing turntable. • May be used for rotating book racks, serving trays, kitchen storage racks, etc. • Zinc finish. • 10/box. Sold individually. Product # Size Load Rating 9547 4” Square 350 lbs. 9548 6” Square 500 lbs. 9549 12” Round 1000 lbs. • Used for custom wood shelf applications. • Aluminum. • 12/box. Sold individually. Product # Description P19 Post - 27-1/2” x 1-1/16” PS4 Positioning Stop R14B Full Circle Shelf Support R14H Pivot Hardware Set SB2 Pie Cut Shelf Support KITCHEN ORGANIZERS Lazy Susans/Corner Cabinetry 2-Shelf Full Circle Hardware Set for Custom Wood Shelves Lazy Susan Turntable Swivels Product # Size Load Rating TR-6C 6” Square 500 lbs. TR-12C 12” Round 1000 lbs. Lazy Susan Turntable Swivel • Rev-A-Shelf Full Circle Hardware Set for use with wood or laminate shelves. • Set includes: Top and bottom pivots, 3/4” diameter shaft assembly for 24”-31” (610mm-788mm) inside cabinet height, collar assembly, two polymer full circle shelf supports and mounting screws. • 1/box. Sold individually. Product # 6020-04P-52 Lazy Susans/Corner Cabinetry • Ball bearing turntable. • Heavy-duty steel; zinc finish. • May be used for rotating book racks, serving trays, kitchen storage racks, etc. • 1/box. Sold individually. • Ball bearing turntable. • Aluminum with bumpers. • Rohs compliant. • Inner Diameter: 10-1/2”; Height: 1/2”. • 20/box. Sold individually. Product # Size Load Rating FT54300 12-3/4” 175 lb. TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 189 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Full Circle Lazy Susans Full-Circle 2-Shelf Hardware Set for Polymer Shelves Full Circle Lazy Susan 2-Shelf Set 6012 Series - Polymer Trays • Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets. • 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft), • Post & pivot hardware accommodates 38”-46” inside cabinet height. • Set includes: Top and bottom pivots, 3/4” diameter shaft assembly, collar assembly, and mounting screws. • 1/box. Sold individually. Product # Description 6022-04-52-526 Post & Pivot Hardware Full-Circle 2-Shelf Hardware Sets - Bulk for Polymer Shelves Lazy Susans/Corner Cabinetry • Full Circle Hardware Only, for Rev-A-Shelf full circle lazy susan sets. • 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft), • Post & pivot hardware accommodates 24”-31” inside cabinet height. • Use with 6001 Bulk Shelves (sold separately) to make 6 complete 2-shelf lazy susan sets. • Bulk Case Contains: 6ea. top & bottom pivots, 6ea. shaft assemblies, 6ea. collar assemblies, 6 sets mounting screws. • 6 case/box. Sold per case. Product # Description 6022-04-4 Post & Pivot Hardware Product # Size Finish 6012-18-11-52 18” White 6012-18-15-52 18” Almond 6012-20-11-52 20” White 6012-20-15-52 20” Almond 6012-24-11-52 24” White 6012-24-15-52 24” Almond 6012-28-11-52 28” White 6012-28-15-52 28” Almond Full Circle Lazy Susan 2-Shelf Set 6072 Series - Polymer Trays Lazy Susan Lower Shaft Assembly • Rev-A-Shelf lazy susan lower shaft only. • For use with full circle dependently rotating sets. • 3/4” diameter, bright zinc plated. • 31” lower shaft assembly for use in 30”-36” wall cabinet applications. • 36” lower shaft assembly for use in 36”-42” wall cabinet applications. • 1/box. Sold individually. 190 • 2-Shelf Set with chrome shaft & hardware. • Dependently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft), • Accommodates 24”-31” inside cabinet height. • 1 set/box. Sold per set. Product # Description 6020-96-3100-2 31” Shaft Only 6020-96-3600-2-52 36” Shaft Only TEL 509.535.1663 TOLL-FREE • 2-Shelf Set with chrome hub & hardware. • Independently rotating shelves, height easily adjusted easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 1” diam. telescoping center shaft (12” upper and 21” lower shaft), • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. Product # Size Finish 6072-32-11-52 32” White 6072-32-15-52 32” Almond 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Full Circle Lazy Susan 3-Shelf Set Full Circle Replacement Shelves 6013 Series - Polymer Trays 6001 Series - Polymer Trays • Shelves only, hardware sold separately. • Use as replacements or where extra shelves are needed. • Polystyrene material with tough, anti-skid texture surface. • 1/box. Sold individually. • 3-Shelf Set with chrome shaft & hardware. • Dependently rotating shelves, height easily adjusted with one screw. • Polystyrene material with tough, anti-skid texture surface. • 3/4” diam. telescoping center shaft (12” upper and 36” lower shaft), can be cut down. • Accommodates 38”-46” inside cabinet height. • 1 set/box. Sold per set. Product # Size Finish 6013-18-11-526 18” White 6013-20-11-526 20” White Product # Size Finish 6001-18-11-52 18” White 6001-20-11-52 20” White 6001-20-15-52 20” Almond 6001-24-11-52 24” White 6001-28-11-52 28” White 6001-28-15-52 28” Almond Full Circle Lazy Susan 2-Shelf Set Lazy Daisy - Natural Wood Full Circle Lazy Susan Sets - Bulk 6012 Series - Polymer Trays Product # Size LD-4NW-072-18-1 18” Product # Description Finish Qty/Case LD-4NW-072-28-1 28” 6001-18-11-4 18” Tray Only White 12 LD-4NW-072-32-1 32” 6001-18-15-4 18” Tray Only Almond 12 6001-20-11-4 20” Tray Only White 12 6001-20-15-4 20” Tray Only Almond 12 6001-28-11-4 28” Tray Only White 12 6001-28-15-4 28” Tray Only Almond 12 6022-04-4 Post & Pivot Hardware Zinc 6 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com Lazy Susans/Corner Cabinetry • Bulk sets, trays and hardware sold separately. • Dependently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft), • Post & pivot hardware accommodates 24”-31” inside cabinet height. • 1 case/box. Sold per case. • 2-Shelf Set with 3/4” diam. telescoping shaft. • Furniture grade design with steam bent rim and chrome hubs. • Independently rotating shelves, height adjusts easily with one screw. • 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled (2) butt joint. • Accommodates 26”-31” inside cabinet height. • 1 set/box. Sold per set. 191 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Full Circle Lazy Susan 2-Shelf Set Full Circle Lazy Susan 3-Shelf Set Wood Classic Wood Classic • 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower shaft assembly). • Independently rotating shelves, height adjusts easily with one screw. • 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint. • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. Product # Size 4WLS072-20-52 20” Full Circle Lazy Susan 3-Shelf Set Product # Size 4WLS073-20-536 20” Recorner Maxx Round Lazy Susan 2-Shelf Set Lazy Daisy - Natural Wood Lazy Susans/Corner Cabinetry 192 • 3-Shelf Set with 1” diam. telescoping shaft (12” upper & 36” lower shaft). • Independently rotating shelves, height adjusts easily with one screw. • 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint. • Accommodates 38”-46” inside cabinet height. • 1 set/box. Sold per set. New Item! • 3-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 36” lower shaft assembly). • Furniture grade design with steam bent rim and chrome hubs. • Independently rotating shelves, height adjusts easily with one screw. • 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled (2) butt joint. • Accommodates 35”-43” inside cabinet height. • 1 set/box. Sold per set. Product # Size LD-4NW-073-1836-1 18” TEL 509.535.1663 TOLL-FREE • Features unique construction with no center pole. • Bases stabilized by a traverse that runs through the cabinet. • Minimum installation height 24-3/8”. • EasyFit: tool-free installation of storage units onto the supporting arms. • Flexible base positioning irrespective of cabinet height. • Can be installed in lower units, high units and wall units. • Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size. • Finish: Maple/Silver. • Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting instructions • 1 set/box. Sold per set. Product # Size A B C 9000-4103 18-7/8” 23-5/8” 12-1/4” - 13-3/4” 11-5/8” 9000-4101 26-3/4” 31-1/2” 21-1/4” - 24” 19-7/8” 9000-4099 30” 35-1/2” 21-1/4” - 24” 19-7/8” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Lazy Daisy - Natural Wood D-Shape Shelf with Swivel Bearing Lazy Daisy - Natural Wood • Shelf with aluminum swivel bearing attached. • 18” tray features a 7” swivel; 24”-32” trays feature a 10” swivel. • 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2) butt joint. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1/box. Sold individually. • Shelf with aluminum swivel bearing attached. • 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2) butt joint. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1/box. Sold individually. Product # Size Product # Size (D) A B C LD-4NW-001-18B-1 18” LD-4NW-201-20BS-1 20” 8-3/8” 9-7/8” 18-1/8” LD-4NW-001-28B-1 28” LD-4NW-201-32BS-1 32” 13-1/2” 16-3/4” 29-3/8” LD-4NW-001-32B-1 32” KITCHEN ORGANIZERS D-Shape Lazy Susans Full Circle Shelf with Swivel Bearing D-Shape Lazy Susan 2-Shelf Set 7012 Series - Polymer Trays Full Circle Shelf with Swivel Bearing Wood Classic Product # Size 4WLS001-20-B52 20” Full Circle 2-Shelf Set with Swivel Bearing Wood Trays • 2-Shelf Set with chrome shaft & hardware. • Dependently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft), • Accommodates 24”-31” inside cabinet height. • Finish: White. • 1 set/box. Sold per set. Product # Size (D) A B C 7012-20-11-52 20” 8-7/8” 9-1/4” 18-7/8” D-Shape Lazy Susan 2-Shelf Set 6272 Series - Polymer Trays • Pre-mounted die-cast aluminum bearing for ultra smooth movement. • 1-3/4” lip height. • 450lb weight capacity. • 12mm multi-directional plywood shelf with 10-ply maple rim. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • Set includes: 2 trays with attached cast bearings. • 1 set/box. Sold per set. Product # Size T7228K30TRDCBMNL1 28” T7232K30TRDCBMNL1 32” TEL 509.535.1663 TOLL-FREE Lazy Susans/Corner Cabinetry • Shelf with 7” aluminum swivel bearing attached. • 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1/box. Sold individually. • 2-Shelf Set with chrome hub & hardware, and self locating stop. • Independently rotating shelves. • Height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 3/4” diam. telescoping center shaft (12” upper and 21” lower shaft), • Accommodates 26”-32” inside cabinet height. • Finish: White. • 1 set/box. Sold per set. Product # Size (D) A B C 6272-20-11-52 20” 8-7/8” 9-1/4” 19” 800.888.1663 www.spokanehardware.com 193 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Kidney Lazy Susans Kidney Lazy Susan 2-Shelf Set Lazy Daisy - Natural Wood Kidney Lazy Susan 2-Shelf Set 6472 Series - Polymer Trays • 2-Shelf Set with chrome shaft & hardware. • Independently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft). • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. Product # Size (D) A B C 6472-18-11-52 18” 1-3/4” 2-13/16” 11-13/16” 6472-24-11-52 24” 1-1/2” 2-5/16” 6472-28-11-52 28” 3” 4-11/16” 18-5/8” 14-5/16” • 2-Shelf Set with 1” diam. telescoping shaft. • Furniture grade design with steam bent rim and chrome hubs. • Independently rotating shelves, height adjusts easily with one screw. • 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled (2) butt joint. • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. Product # Size (D) A B C Finish LD-4NW-472-28-1 28” 3” 4-1/4” 18-1/8” White LD-4NW-472-32-1 32” 4” 5-3/4” 21-5/8” White Kidney Lazy Susan 2-Shelf Set White 6472-28-15-52 28” 3” 4-11/16” 18-5/8” Almond 6472-32-11-52 32” 4-1/4” 6-7/16” 22-7/16” White 6472-32-15-52 32” 4-1/4” 6-7/16” 22-7/16” Almond Wood Classic Kidney Lazy Susan 2-Shelf Sets - Bulk 6472 Series - Polymer Trays Lazy Susans/Corner Cabinetry • 2-Shelf Set with 1” diam. telescoping shaft (9-1/4” upper & 22-1/2” lower shaft assembly). • Independently rotating shelves, height adjusts easily with one screw. • 1-5/8” solid wood rim, 5/8” thick solid maple tray bottom, finger joint. • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. • 2-Shelf Set with chrome shaft & hardware. • Independently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft). • Accommodates 26”-32” inside cabinet height. • Each Set Contains: 2 - shelves, telescoping shaft, mounting hardwarecomplete with screws. • Sold by the case only, 5 complete sets/bulk case. Product # Size (D) A B C Finish 6472-28-11-4S 28” 3” 4-11/16” 18-5/8” White 6472-28-15-4S 28” 3” 4-11/16” 18-5/8” Almond Product # Size (D) A B C 4WLS472-24-52 24” 1-7/16” 2-3/8” 14-3/8” Kidney Lazy Susan 2-Shelf Set 5472 Series - Premiere Chrome • 2-Shelf Set with chrome hubs & hardware. • Independently rotating shelves, height adjusts easily with one screw. • Heavy-duty chrome wire for contemporary kitchen designs. • 1” diam. telescoping center shaft (9-1/4” upper and 22-1/2” lower shaft), • Accommodates 26”-32” inside cabinet height. • 1 set/box. Sold per set. 194 TEL 509.535.1663 TOLL-FREE Product # Size (D) A B C 5472-28-CR 28” 3” 4-3/8” 18-7/16” 5472-32-CR 32” 4-1/8” 6” 22-1/16” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Kidney 2-Shelf Set with Swivel Bearing Wood Trays New Item! • Features unique construction with no center pole. • Bases stabilized by a traverse that runs through the cabinet. • Minimum installation height 24-3/8”. • EasyFit: tool-free installation of storage units onto the supporting arms. • Flexible base positioning irrespective of cabinet height. • Can be installed in lower units, high units and wall units. • Load Rating: 62lbs. evenly spaced; 26.5 lbs. for 18-7/8” size. • Finish: Maple/Silver. • Set Contents: 2 trays, 2 support arms, 2 wall brackets and mounting instructions • 1 set/box. Sold per set. • Pre-mounted die-cast aluminum bearing for ultra smooth movement. • 1-3/4” lip height. • 450lb weight capacity. • 12mm multi-directional plywood shelf with 10-ply maple rim. • Set includes: 2 trays with attached cast bearings. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1 set/box. Sold per set. Product # Size T8228K30TRDCBMNL1 28” T8332K30TRDCBMNL1 32” KITCHEN ORGANIZERS Recorner Maxx Kidney Lazy Susan 2-Shelf Set Deep Bin Super Susan & Swivel Bearing Wood Tray Product # Size A B C 9000-4102 18-7/8” 23-5/8” 12-1/4” - 13-3/4” 11-5/8” 9000-4100 26-3/4” 31-1/2” 21-1/4” - 24” 19-7/8” 9000-4098 30” 35-1/2” 21-1/4” - 24” 19-7/8” Kidney Shelf with Swivel Bearing Lazy Daisy - Natural Wood Product # Size (D) A B C LD-4NW-401-28BS-1 28” 3” 4-1/4” 18-1/8” LD-4NW-401-32BS-1 32” 4” 5-3/4” 21-5/8” TEL 509.535.1663 TOLL-FREE Product # Diameter T8530K30TR6DCBMNL1 30” 800.888.1663 www.spokanehardware.com Lazy Susans/Corner Cabinetry • Shelf with aluminum 10” swivel bearing attached. • 2-3/8” high steam bent rim, 5/8” thick maple tray bottom, doweled (2) butt joint. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1/box. Sold individually. • 450lb. cast aluminum bearing with detent attached. • Hard maple and birch construction and 1/2” plywood shelf. • Solid maple rim front; 6” high lip. • Tray pre-drilled with screw hole to mount bearing to cabinet, screw hole cover cap included. • 1/box. Sold individually. 195 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Pie-Cut Lazy Susans Pie-Cut Lazy Susan 2-Shelf Set Lazy Daisy - Natural Wood Pie Cut Lazy Susan 2-Shelf Set 6142/6942 Series - Polymer Trays • 2-Shelf Set with chrome hub & hardware. • Standard centering hardware, raises 3/8” as unit rotated in & out of detent. • Polystyrene material with tough, anti-skid texture surface. • 6142 Series: 3/4” diam. telescoping center shaft, accommodates 24”-31” inside cabinet height. • 6942 Series: 1” diam. telescoping center shaft, accommodates 26”-32” inside cabinet height. Upper shelf adjustable, lower shelf is in fixed position. • 1 set/box. Sold per set. Lazy Susans/Corner Cabinetry 196 Product # Size (D) A B C Finish 6142-18-11-52 18” 7/8” 1-1/4” 10-1/4” White 6142-22-11-52 22” 1-1/8” 1-9/16” 12-9/16” White 6942-24-11-52 24” 1-3/8” 1-15/16” 13-15/16” White 6942-24-15-52 24” 1-3/8” 1-15/16” 13-15/16” Almond 6942-28-11-52 28” 3” 4-1/4” 18-1/4” White 6942-28-15-52 28” 3” 4-1/4” 18-1/4” Almond • 2-Shelf Set with 1” diam. telescoping shaft. • Furniture grade design with steam bent rim and chrome hubs. • Dependently rotating shelves, physically attach to the door. • 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled (2) butt joint. • Accommodates 26”-32” inside cabinet height. • Specifications: A = 3” ; B = 4-1/4”; C = 18-1/8”; D = 27-3/4”; Z = 10-7/8” + 1/8”gap. • 1 set/box. Sold per set. Product # Size LD-4NW-942-28-1 28” Pie Cut Lazy Susan Sets - Bulk 6901 Series - Polymer Trays • Bulk sets, trays and hardware sold separately. • Dependently rotating shelves, height adjusts easily with one screw. • Polystyrene material with tough, anti-skid texture surface. • 1” diam. telescoping center shaft system. • Post & pivot hardware accommodates 26”-32” inside cabinet height. • Specifications: A = 3” ; B = 4-1/4”; C = 18-1/4”; D = 28”; Z = 10-11/16” + 1/8”gap. • 1 case/box. Sold per case. Product # Description Finish Qty/Case 6901-28-11-4 28” Tray Only White 12 6942-04-28-4 Post & Pivot Hardware Zinc 6 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Vibo Fly Moon Corner Shelves Only Pivot & Slide Half Moon 2-Shelf Set 6882 Series - Polymer Trays New Item! • An innovative and unique space saving corner unit. • Shelves can be pulled-out independently. • Trays designed to increase storage surface - feature 2-3/4’’H shelf rail, and non slip melamine surface. • For frame and frameless cabinets. • Load capacity 44 lbs (20kg) per shelf. • Minimum door opening 85°. • Finish: Champagne/maple. • Tray Height: 3-3/8”. • Kit contents: 2 pull-out pivoting shelves only. Corner Mechanism must be ordered separately. • 1 pr/box. Sold per pair. Product # Handing Min.Opening Tray Width QFLY40DXM20MVCH Right 13-5/8” 29” QFLY40SXM20MVCH Left 13-5/8” 29” QFLY45DXM20MVCH Right 16” 32-3/16” QFLY45SXM20MVCH Left 16” 32-3/16” QFLY60DXM20MVCH Right 21” 38-7/16” QFLY60SXM20MVCH Left 21” 38-7/16” New Item! • Designed for a blind corner cabinet applications. • 2-Shelf Set with pivot and slide hardware. • 15-7/8”H shaft assembly. • Polystyrene trays with tough, anti-skid texture surface. • For frame and frameless cabinets, non-handed. • 1 set/box. Sold per set. • Allows shelves (sold separately) to be pulled-out independently. • Height adjustable shaft, easy to install. • Patented mechanism can be easily fixed in on one side of the cabinet. • For frame and frameless cabinets. • Minimum door opening 85°. • Finish: Champagne. • Height Adjustable: 26”-32” (660-813mm). • Kit contents: Corner mechanism with height adjustable shaft; assembly instructions and drilling template, extension pipe. • Must order Separately: Vibo Fly Moon 2 pull-out pivoting shelf set. • 1/box. Sold individually. Product # Size Min. Opening Finish 6882-31-11-570 31” 13-1/4” White 6882-31-15-570 31” 13-1/4” Almond 6882-33-11-570 33” 16-1/8” White 6882-33-15-570 33” 16-1/8” Almond 6882-39-11-570 39” 19-1/4” White Product # Handing Min.Opening 6882-39-15-570 39” 19-1/4” Almond QFLYAST2DXVCH Right 13-5/8” or 16” QFLYAST2SXVCH Left 13-5/8” or 16” QFLYAST602DXVCH Right 21” QFLYAST602SXVCH Left 21” TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com Lazy Susans/Corner Cabinetry Vibo Fly Moon Corner Mechanism Only KITCHEN ORGANIZERS Blind Corner Lazy Susans 197 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Half Moon 2-Shelf Tray Set KitchenMate Blind Corner Caddy Lazy Daisy - Natural Wood • Designed for blind corner cabinet applications. • 2-Shelf Set with pivot and slide hardware. • Furniture grade design with steam bent rim and chrome hubs. • 2-3/8” high steam bent rim, 5/8” thick solid maple tray bottom, doweled (2) butt joint. • 15-7/8”H shaft assembly. • For frame and frameless cabinets, non-handed. • 1 set/box. Sold per set. Product # Size Min. Opening LD-4NW-882-32-1 32” 12” LD-4NW-882-35-1 35” 15” LD-4NW-882-38-1 38” 18” Pivot & Slide Half-Moon Shelf The KitchenMate Blind Corner Caddy is designed for those hard-to-reach areas in a blind corner cabinet. Perfect for bulk storage, occasional-use items or counter top appliances. Set Includes: • Two-shelf drawer kit with 100lb, full-extension, ball-bearing slides, premounted onto sled with vertical side panels (for upper tray). • Swing-out, all solid wood, pre-finished maple storage bins accessible from both sides. • Designed for 15” or larger openings. • 1 set/box. Sold per set. Product # Wire Tray P0650MNL1 KitchenMate Corner Pantry Lazy Susans/Corner Cabinetry • Designed for use in blind corner cabinets. • Pivot-out shelf features non-handed reversible hinge system. • Glide-out shelf extends on 21-5/8” heavy-duty ball-bearing slides. • Nylon door follower attaches susan to door for automatic shelf retrieval. • 1 set/box. Sold per set. Product # Size Min.Opening Finish HM28G-W 28” 14-1/2” White The KitchenMate Corner Pantry is a truly unique alternative to the traditional lazy susan. Fabricated from solid maple and plywood construction, this unit comes fully assembled and pre-mounted with a plywood sled for easy installation. • Designed for 33” & 36” corner cabinets. • Features heavy-duty, 125lb. full extension slides. • Perfect for remodels, can be easily installed even with existing countertop intact. • 1 set/box. Sold per set. 198 TEL 509.535.1663 TOLL-FREE Product # Size Height P0610MNL1 33” 26-1/2” P0615MNL1 36” 26-1/2” 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Chef’s Double Pantry System Rev-A-Shelf Blind Corner Optimizer 5PSP CR Series KITCHEN ORGANIZERS Pantry Organizers / Blind Corner New Item! • Maximizes space in blind corner cabinets while allowing the user full accessibility to the entire unit. • Features 100lb rated full-extension ball-bearing slides. • Unit slides completely outside of cabinet for hard to reach items. • Works in either a blind-left or blind-right corner cabinet. • Fit most 45”(PSP-15/18) and 48” (PSP-18). • Finish: Chrome. • Basket Dimensions 5PSP-15CR: 11-3/4”W x 16-1/2”D x 3-1/2”H. • Basket Dimensions 5PSP-18CR: 14-3/4”W x 16-1/2”D x 3-1/2”H. • Set Contents: frame w/4 chrome baskets, full-extension 100lb. slides, mounting hardware & screws. • 1/box. Sold individually. Product # Width Depth Height Min.Opening 5PSP15-CR 26-1/4” 20-1/4” 21” 15”W 5PSP18-CR 32-1/4” 20-1/4” 21” 17-3/4”W The Omega National Chef’s Pantry Systems are not only beautiful but they are heavy duty as well. Manufactured from Baltic Birch, the Omega National pantry systems are highly versatile and allow for many different shelving configurations. • Min. Cabinet opening: 33” wide. • Clear Coated Birch. • System Includes: (2) Swing-Out Units: 51 1/2”H x 12 1/4”W x 7 1/4”D; (2) Door Units: 51 1/2” H x 12 1/4” W x 3 3/4” D ; (24) Shelf Supports; (4) Non-Mortise Hinges 3 1/2”; (12) Adjustable Shelf Fronts; (6) Door Unit Adjustable Shelves; (6) Swing-Out Adjustable Shelves; (1) Mounting Hardware Package. • Shown with Center Mounting Panel (not included). • 1 set/box. Sold per set. Product # P0251DNL1 5707 Series Chef’s Upper Door System New Item! Maximize space in blind corner cabinets with this Premiere Corner System that provides easy access to hard-to-reach areas hidden in the back of the cabinet. • Two large and two small heavy-gauge chrome plated baskets. • Exceptionally designed pivot and slide on a “soft-close” slide system. • Universal door mounting hardware for left or right hand applications and easy to follow installation instructions. • Can be utilized in both face frame and frameless cabinets with 15” and 18” openings. • Finish: Chrome. • 1/box. Sold individually. Product # Width Height Depth Min. Opening 5707-15CR 39” to 48” 21-3/8” 20-1/16” 15”W 5707-18CR 39” to 48” 21-3/8” 20-1/16” 18”W TEL 509.535.1663 TOLL-FREE The Omega National Chef’s Pantry Systems are not only beautiful but they are heavy duty as well. Manufactured from Baltic Birch, the Omega National pantry systems are highly versatile and allow for many different shelving configurations. • Clear Coated Birch. Pantry Organizers / Blind Corner Blind Corner Organizer with Soft-Close • System Includes: (2) Door Units: 18-1/2” H x 12-1/4” W x 3-3/4” D ; (1) Mounting Hardware Package. • 1 set/box. Sold per set. Product # P0262DNL1 800.888.1663 www.spokanehardware.com 199 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS KV 8000 Undermount Pantry Slides Glideware Pull-Out Rack with Hooks Overtravel - 130lb. New Item! Designed for use with kitchen pantries, computer and entertainment centers, or where a pull-out shelf is needed. • Load capacity: 130lbs. • Extension: full-extension plus overtravel. • Mounting: bottom mount. • Slide Action: Telescoping; ball-bearing. • Clearance: 3/4” (slide only); 2-1/4” (with brackets). • Height: 1-35/64”. • Removable brackets that allow for fast and easy installation. • Hold-in detent and key-hole style mounting holes. • Steel; anochrome plated finish. • 5 pr/box. Sold per pair. Pantry Organizers / Blind Corner 200 Product # Size 8000P20 20” 8000P22 22” 8000P24 24” • Keeps cabinets organized and eliminates clutter. • Solid, clear maple body and 7 solid metal, custom-made hooks. • Gliding hardware designed with a 100-pound capacity. • Weighted hooks and synchronized motion keeps cookware quiet. • Designed to fit any standard depth cabinet - installation in a full height cabinet is recommended to hang larger cookware. • Top of unit to bottom of hooks: 5”. • Rear mounting bracket (for face frame installation) will add 3/4” to overall length. • Lifetime Warranty. • 1/box. Sold individually. Product # Length Width Height Finish GLDWR7HK 22” 4-1/4” 3” Clear Maple Hooks for Glideware • Solid metal, custom-made, weighted hooks designed to fit the Glideware Racks. • 1 pr/box. Sold per pair. TEL 509.535.1663 TOLL-FREE Product # Finish GLDWR2HK Satin Nickel 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Door Storage and Spice Racks Adjustable Door Mount Spice Rack 4ASR Series - Wood Classics Wood Door Storage Tray 4200 Series - Wood Classics • Easy to install with screw-in clips (included). • May also be mounted to 6232 adjustable aluminum standards (sold separately). • Includes: Single maple wood tray with chrome rails and screw-in clips. • 1/box. Sold individually. Product # Width Depth Height 4231-14-52 13-3/4” 4-1/4” 3-5/8” Door Storage Shelf Set 6230 Series • Maple hardwood with a UV-cured clear finish. • Adjustable shelves offer up to 5” of mounting adjustment. • Hold spice bottles up to 2-1/4” diam. • 1/box. Sold individually. Product # Width Depth Height Min.Opening 4ASR-15 10-1/8” 4” 25” 11” 4ASR-18 13-1/8” 4” 25” 14” 4ASR-21 16-1/8” 4” 25” 16-3/4” Door Mount Spice Rack 4SR Series - Wood Classics Door Storage and Spice Racks • Easy to install with screw-in clips (included). • May also be mounted to 6232 adjustable aluminum standards (sold separately). • Set includes: 2 polymer shelves with screw-in clips. • 1 set/box. Sold per set. Product # Width Depth Height 6232-14-11-52 13-3/4” 4-1/4” 3-9/16” 6232-20-11-52 19-3/4” 4-1/4” 3-9/16” 6232-08-11-52 7-7/8” 4-1/4” 3-9/16” • Maple hardwood rack with a UV-cured clear finish. • Easily installs with just four screws. • 1/box. Sold individually. Shelf Standards & Clips Product # Width Height Depth 4SR-15 9-5/8” 21-1/2” 3-1/8” 4SR-18 12-5/8” 21-1/2” 3-1/8” 4SR-21 15-5/8” 21-1/2” 3-1/8” • For use with Rev-A-Shelf Door Storage trays (sold separately). • Adjustable clips attach your door storage tray to the standards. Product # 6231-41-4101-10 6232-58-4528-52 6232-26-4528-52 TEL Description Qty/Box 1/box. Sold Replacment Clips White individually. 58” Standards w/10 Clips Aluminum 1 pr/box. Sold 26” Standards w/4 Clips Aluminum per pair. 509.535.1663 Finish TOLL-FREE 800.888.1663 www.spokanehardware.com 201 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Drawer Organizers Door Mount Spice Rack 565 Series Drop-In Drawer Peg System 4DPS Series - Wood Classics • Endlessly changeable pegboard system creates instant storage for all kinds of items. • Can be trimmed to fit and is constructed from UV-Cured maple. • Includes: 1 peg board and push-in pegs. 4DPS-2421 (9 pegs), 4DPS-3021 (12 pegs) , 4DPS-3921 (16 pegs). • Top 3 baskets are 2-3/8” deep and the bottom basket is 4-1/8” deep. • Includes screw down clips for easy mounting. • Heavy gauge white wire. • 1/box. Sold individually. Product # Width Height 565-8-52 7-7/8” 21-3/8” 565-10-52 10-5/8” 21-3/8” 565-14-52 13-5/8” 21-3/8” Product # Width Depth Height 4DPS-2421 24-1/4” 21-1/4” 6-5/8” 4DPS-3021 30-1/4” 21-1/4” 6-5/8” 4DPS-3921 39-1/4” 21-1/4” 6-5/8” 1-1/4” 6” Qty/Box 1 set/box. Sold per set. Additional Pegs Sink Base Door Storage 4SBSU Series - Wood Classics 4DPS-PEG-4 1-1/4” 4/box. Sold individually. Trimmable Cutlery Tray Insert 4WCT Series - Wood Classics Door Storage and Spice Racks • Maple hardwood construction with a UV-cured clear finish. • Features a polymer tray on the top shelf with new adjustable door mount brackets that provide installation flexibility up to 5”. • 1/box. Sold individually. Product # Width Height Depth Min.Opening 4SBSU-15 10-1/2” 18-1/2” 5” 11-5/8” 4SBSU-18 13-1/2” 18-1/2” 5” 14-3/8” 4SBSU-21 16-1/2” 18-1/2” 5” 17-1/4” • Height: 2-7/8”. • Cut to size, drop-in installation. • Maple hardwood with a UV-cured clear finish. • 1/box. Sold individually. 202 TEL 509.535.1663 TOLL-FREE Product # Overall Size Min. Trim 4WCT-1 14-5/8”W x 22”D 8-3/4”W x 15-1/2”D 4WCT-3 20-5/8”W x 22”D 14-1/4”W x 15-1/2”D 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Knife Holder/Cutting Board Drawer System 4WUT Series - Wood Classics 4KCB Series - Wood Classics KITCHEN ORGANIZERS Trimmable Utility Tray Insert Combination knife holder/cutting board with full-extension, ball-bearing slides. • No drawer box needed, comes as a complete set, all you need is drawer front. • Adjustable depth, designed for 24” deep cabinets. • Features 3 divided sections and 7 slot knife holder. • Minimum opening height : 4-3/4”. • 1 set/box. Sold per set. • Height: 2-7/8” • Cut to size, drop-in installation. • Maple hardwood with a UV-cured clear finish. • 1/box. Sold individually. Product # Overall Size Min.Trim 4WUT-1 18-1/2”W x 22”D 8-1/8”W x 17”D 4WUT-3 24”W x 22”D 12”W x 17-5/8”D Product # Width Depth Height 4KCB-18 14-1/2” 22-1/4” 5” 4KCB-21 17-1/2” 22-1/4” 5” 4KCB-24 20-1/2” 22-1/4” 5” Cutlery Tray Wood Knife Block Insert 4WKB Series - Wood Classics Drawer Organizers • Features 19 slots to store knives. • Birch/maple hardwood coated with a UV-cured clear finish. • Trimmable for customized drawer sizes. • 1/box. Sold individually. Product # Width Depth Height 4WKB-1 18-1/2” 22” 2-3/8” TEL 509.535.1663 TOLL-FREE • Height: 2-3/8”. • Can be custom cut to size with a simple drop-in installation. • Hi-impact rubberized polystyrene in a high gloss white or silver finish. • 1/box. Sold individually. Product # Overall Size Min.Trim Color GCT-1S-52 11-1/2”W x 21-1/4”D 8-5/8”W x 17-3/4”D Silver GCT-1W-52 11-1/2”W x 21-1/4”D 8-5/8”W x 17-3/4”D White GCT-2S-52 14-1/4”W x 21-1/4”D 11-5/8”W x 17-3/4”D Silver GCT-2W-52 14-1/4”W x 21-1/4”D 11-5/8”W x 17-3/4”D White GCT-3S-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D Silver GCT-3W-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D White GCT-4S-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D Silver GCT-4W-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D White 800.888.1663 www.spokanehardware.com 203 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Rolling Tray System Trimmable Cutlery Tray Insert • Roller system rolls smoothly in lower track built into bottom utility tray. • The top rolling tray requires no trimming and is easily removable. • 3-1/8”H min. cabinet opening. • Base tray: 1-5/8”H. • White high gloss finish, thick gauge polystyrene. • 1 set/box. Sold per set. Product # Overall Size Min.Trim RT-10-3H 11-3/4” x 16-3/4” 8-3/4” x 16-3/4” RT-12-3H 14-1/2” x 16-3/4” 11-3/4” x 16-3/4” RT-14-3H 17-3/4” x 16-3/4” 14-3/4” x 16-3/4” RT-18-3H 21-3/4” x 16-3/4” 17-3/4” x 16-3/4” • Height: 2”. • Can be trimmed to fit drawer. • Made of plastic with faux maple finish. • 1/box. Sold individually. Product # Width Depth 556-53-400 8” - 12” 19-1/4” - 21-1/4” 556-53-401 12” - 16” 19-1/4” - 21-1/4” 556-53-403 16” - 20” 19-1/4” - 21-1/4” 556-53-405 20” - 24” 19-1/4” - 21-1/4” Spice Drawer Insert 4SDI Series - Wood Classics Utility Tray • Height: 1-1/2”. • This insert can be customized to fit various drawer sizes. • Birch/Maple hardwood with a UV-cured clear finish. • 1/box. Sold individually. Drawer Organizers Product # Width Depth 4SDI-18 16” 19-3/4” 4SDI-24 22” 19-3/4” Spice Drawer Insert • Height: 2-3/8” • Can be custom cut to size with a simple drop-in installation. • Hi-impact rubberized Polystyrene in a high gloss white finish. • 1/box. Sold individually. Product # Overall Size Min. Size Color GUT-10W-52 11-1/2”W x 21-1/4”D 8-1/4”W x 17-3/4”D White GUT-12W-52 14-1/2”W x 21-1/4”D 11-5/8”W x 17-3/4”D White GUT-15W-52 17-1/2”W x 21-1/4”D 14-3/4”W x 17-3/4”D White GUT-18W-52 21-7/8”W x 21-1/4”D 18-3/8”W x 17-3/4”D White • Height: 2-3/8”. • Designed to hold spice containers securely while keeping them easily accessible. • Can be custom cut to size with a simple drop-in installation. • Hi-impact rubberized polystyrene in a high gloss white. • 1/box. Sold individually. 204 TEL 509.535.1663 TOLL-FREE Product # Size Min.Trim ST-2GW-52 16”W x 21-1/4”D 11-3/8”W x 15-1/2”D 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Sink Front Tip-out Tray Set 6540 Slim Series • Designed to be easily trimmed to length for custom applications. • Set includes: (1) - 36” extruded tray, 2 pair of hinges, 2 pair of end caps, and adhesive. • 1 set/box. Sold per set. • Designed to hold spice containers securely. • Trimmable to fit any size. • Polymer, textured finish. • 1/box. Sold individually. Product # Size Finish ST50-21A-52 50”W x 21”D Almond ST50-21W-52 50”W x 21”D White Maple Height Color 2-1/2” White 6541-36-15-52 36” 1-11/16” 2-1/2” Almond • Designed to be easily trimmed to length for custom applications. • 36” tray only, hinges & end caps sold separately. • 20/box. Sold individually. Depth Height Color 6541-36-11-4 36” Product # Length 1-11/16” 2-1/2” White 6541-36-15-4 36” 1-11/16” 2-1/2” Almond Tip-Out Tray Hinges & End Caps 6540 Slim Series Vanity Drawer Organizer Sink Front Tip Out Trays C0480MNL1 Depth 1-11/16” 6540 Slim Series • Design segments for any size storage or any size deep drawer. • Features 3 pre-finished 11” x 24” maple hardwood dividers and 6 predrilled mounting rails. • Easily trimmed for various drawer depths. • 1 set/box. Sold per set. Finish Length 36” Sink Front Tip-out Tray Only Tra-Sta Deep Drawer Divider Kit Product # Product # 6541-36-11-52 KITCHEN ORGANIZERS Sink Front Tip Out Trays Spice Drawer Insert • Set includes: (1) pair Hinges, 1 pair end caps, and adhesive • Tip-out trays sold separately. • 40 pr/box. Sold per pair. • Top Rolling Tray: 5-7/8” W x 12-13/16” D x 1-1/2”H. • Base tray : 1-7/8” deep. • Requires 3-3/8”H minimum clearance. • While polymer. • 1 set/box. Sold per set. Product # Size Min.Trim COSK-18 14-3/4”W x 21-7/8”D 12-5/8” x 16-1/2”D TEL 509.535.1663 TOLL-FREE Product # Finish 6542-97-11-4 White 6542-97-15-4 Almond 800.888.1663 www.spokanehardware.com 205 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Sink Front Tip-out Tray Set Tip-Out Tray Hinges & End Caps 6551 Series 6571 Series • Set includes: 1 pair hinges, 1 pair end caps, and adhesive • 6571 Series tip-out tray sold separately. • 40 pr/box. Sold per pair. • Extruded polymer tip-out/spice tray can be trimmed to the desired length. • Set includes: 1 tray, 2 pair hinges, 2 pair end caps, and adhesive. • 1 set/box. Sold per set. Product # Length Depth Height Color 6551-36-11-52 36” 2-7/16” 3-15/16” White 6551-36-15-52 36” 2-7/16” 3-15/16” Almond Product # Finish 6552-97-11-4 White End Cap Adhesive Sink Front Tip-out Tray Only 6571 Series • Adhesive for attaching end caps on 6541 and 6571 Series Tip-Out Trays. • 3 gram tube. • 1/box. Sold individually. Product # 6571-60-52 Tip-Out Tray with Tab Stops • Tray designed to be easily trimmed to length for custom applications. • Includes: 1 extruded tray only (hinges, end caps, and adhesive sold separately). • 20/box. Sold individually. Product # Length Depth Height 6561 Series Color Sink Front Tip Out Trays 6571-36-11-4 36” 2-7/16” 3-15/16” White 6571-72-11-4 72” 2-7/16” 3-15/16” White Tip-Out Tray End Caps 6571 Series • Installs easily with standard cabinet hinges. • NOTE: Tabs on each side adds an additional 1-1/2” to width. • Tray only, hinges not included. • 1/box. Sold individually. Product # Tray Width 6561-11-11-4 11” • Includes: 1 pair of end caps and screws for one standard 6571 Series tipout trays (sold separately). • Molded white polymer. • 40 pr/box. Sold per pair. 206 Product # Height ST-97-11-4 3-15/16” TEL 509.535.1663 TOLL-FREE Depth Height Color 2-1/8” 3-13/16” White 6561-11-15-4 11” 2-1/8” 3-13/16” Almond 6561-14-11-4 14” 2-1/8” 3-13/16” White 6561-14-15-4 14” 2-1/8” 3-13/16” Almond 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Stainless Steel Tip-Out Tray 6572 Series - Polymer 6581 Series • Sleek molded design, high-impact polystyrene. • Set includes: (1) standard tray, (1) accessory tray with a ring holder & soap dish and 2 pair of the Self-Holdin® hinges. • 1 set/box. Sold per set. Product # Width KITCHEN ORGANIZERS Tip-Out Tray System Depth Height Color 6572-11-11-52 11” 2-1/8” 3-13/16” White 6572-11-15-52 11” 2-1/8” 3-13/16” Almond 6572-11-17-52 11” 2-1/8” 3-13/16” Silver/metallic 6572-14-11-52 14” 2-1/8” 3-13/16” White 6572-14-15-52 14” 2-1/8” 3-13/16” Almond 6572-14-17-52 14” 2-1/8” 3-13/16” Silver/metallic Tip-Out Tray 6581 Series - Polymer • Sleek design with smooth, folded over edges and protective coating. • Does not come with built-in tab stops. • Tray only, hinges not included. • 20/box. Sold individually. Product # Width Depth Height 6581-11-5 11-1/4” 2-1/8” 3” 6581-14-5 14-1/4” 2-1/8” 3” 6581-16-5 16” 2-1/8” 3” 6581-19-5 19” 2-1/8” 3” 6581-25-5 25” 2-1/8” 3” 6581-28-5 28” 2-1/8” 3” Tip-Out Tray Hinges 6552 Series Product # Width Depth Height Color 6581-11-11-4 11” 2-1/8” 3-13/16” White 6581-11-15-4 11” 2-1/8” 3-13/16” Almond 6581-14-11-4 14” 2-1/8” 3-13/16” White 6581-14-15-4 14” 2-1/8” 3-13/16” Almond TEL 509.535.1663 TOLL-FREE • Self-Holdin® hinges mount easily to all construction types and are totally concealed. • Feature a self-closing and tip-open function. • Less than 2mm of clearance is needed for the countertop and no clearance is required below the false front. • Projection: 1/2”. • 40 pr/box. Sold per pair. Product # Width Depth Height 6552-95-0220-4 1” 1-3/4” 3-13/16” 800.888.1663 www.spokanehardware.com Sink Front Tip Out Trays • Sleek molded design, high-impact polystyrene. • Tray only, hinges not included. • 40/box. Sold individually. 207 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Soft-Close Tip-Out Hinges Tip-Out Tray Euro Hinges • Unique soft-close piston eliminates slamming. • 50 degree opening allows for complete accessibility to items stored within. • Hinges close firmly and stay closed. • Projection: 1”. • 1 pr/box. Sold per pair. • Allows for opening angle from 45º-90º. • Perfect for use with sink front trays as well as with bread boards. • Fits both frame and frameless cabinetry. • 10 pr/box. Sold per pair. Product # Width LD-0220-50SC-40 1” Depth Height 2-1/2” 3-7/8” Product # Height Depth Width ET-H-N 2-7/8” 2-1/4” 3-3/4” False Front Block Tip-Out Tray Hinges ETH Series • Allows false front panels to be easily installed and removed with a simple twist. • For use with 3/4” face frames and a drawer opening height of 4-1/2”. • Install with single 1” long flat head screw in center hole. • Overall size: 5-1/2”L x 3/4”W x 1”H. • White plastic. • 100/box. Sold individually. Product # Sink Front Tip Out Trays 4300-32 False Front Clip • Designed for long sink front or cooktop false panels • Features an adjustable opening of 45 to 90 degrees. • Chrome plated, easy installation. • 10 pr/box. Sold per pair. Product # 6552-ETH-10 • Designed with staggered jaws to grip uneven wood sections. • Permits false front panel above sink doors to be easily snapped into place. • For 3/4” material. Install using staples or glue. • 100/box. Sold individually. Tip-Out Tray Scissor Hinges Product # Finish 1931-32 Clear False Front Clip • Scissor Hinges are spring-loaded and self-closing with internal stop. • For use with face-frame or frameless (Euro-style) cabinetry. • 10 pr/box. Sold per pair. 208 Product # Width Depth Height SH-10 2-7/8” 1-7/8” 3-13/16” TEL 509.535.1663 TOLL-FREE • Permits false front panel above sink doors to be easily snapped into place. • For use with 3/4” thick face frame material. • Screws sold separately. • 100/box. Sold individually. Product # Finish 1987-32 White 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Tra-Sta Tray Organizer Tray Divider with Clips • Four prefinished maple veneer dividers slide in grooved and predrilled top and bottom rails. • Easily trimmable to fit any size cabinet. • Set includes: 4 finished dividers and 8 drilled rails. Use #4 1/2” flat head screws, NOT INCLUDED. • 1 set/box. Sold per set. • Available in 2 sizes: 12” for wall cabinets and 18” for base cabinets. • Each divider includes 4 screw-in polymer clips and fasteners. • 10/box. Sold individually. Product # Height Depth Finish 597-12-10 12” 20” White 597-18-10 18” 20” White 597-12CR 12” 20” Chrome 597-18CR 18” 20” Chrome Product # Length Width TS2424 24” 24” KITCHEN ORGANIZERS Tray Dividers Tray Divider Rollout Tray Dividers with Clips • Installs easily with four attachment clips. • Heavy gauge 1/4” white steel wire. • Finish: White. • 1/box. Sold individually. Product # Width # of Dividers Height Depth T3194MNL1 5” 1 TD12-W 12” 19-1/2” T3195MNL1 8” 2 TD18-W 18” 19-1/2” T3196MNL1 11” 3 Product # Tray Dividers • All wood construction, clear-coated maple finish, and removable partitions. • 100lb, full extension ball-bearing slides. • Pre-assembled, designed for 9”, 12” and 15” base cabinets. • 10”H x 21-3/4”D • 1/box. Sold individually. U-Shaped Tray Dividers New Item! • The sturdy construction and beautiful chrome finish provide durability and style. • Easy four-screw installation. • 1/box. Sold individually. Product # Width Height Depth 596-10CR-52 3” 10” 11-7/8” TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 209 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Wine, Stemware and Plate Racks Russian River Wine Rack Plate Display Rack • The “X” rack folds down on itself and is height adjustable. • Designed for 18” & 24” cabinets. • 10-3/4” depth is trimmable for custom sizes. • Manufactured from 3/4” x 7/16” solid hardwood mouldings. • 1/box. Sold individually. • 36”L x 13-1/16”H x 1-1/2”W. • Fully assembled unit, boxed two pieces per carton (front and back). • Center 3 dowels are removable for easy cleaning of the cabinet. • 3/8” diameter dowels are spaced 2” on center. • Mouldings have trim area of 1-1/2” on each end. • 1 pr/box. Sold per pair. Product # Species NPD-36-CH Cherry NPD-36-HI Hickory NPD-36-MA Maple NPD-36-RO Red Oak Product # Species Size WS100QUF1 Alder 22-3/8” legs WS100MUF1 Maple 22-3/8” legs WS110QUF1 Alder 30-7/8” legs WS110CUF1 Cherry 30-7/8” legs WS110MUF1 Maple 30-7/8” legs Wine Bottle Rack WineLogic Wine Rack Wine, Stemware and Plate Racks 210 SPECIAL ORDER • 16-1/4”W x 22-1/4”D - Minimum cabinet opening: 15” wide. • Fits into standard base cabinet. • Full extension, ball-bearing slides allow each tray to glide smoothly in and out of the rack. • The bottom tray has a sturdy, 75 lb capacity, while the top trays max out at 100 lbs each. • Horizontal design keeps corks remain moist and swelled. • Clear coated maple construction. • Made in the USA. • Available in 20-20 Design Software for interior designers. • 1/box. Sold individually. Product # Capacity Height WLMAPLE12 12 Bottle 7-3/8” WLMAPLE18 18 Bottle 11” WLMAPLE24 25 Bottle 14-5/8” WLMAPLE30 30 Bottle 18-1/4” TEL 509.535.1663 TOLL-FREE • 48”L x 2”H. • Solid wood, sanded and ready to finish. • Holds eleven wine bottles and is easily trimmed for installation. • Boxed two pieces per carton (front and back). • 1 pr/box. Sold per pair. Product # Species S9200CUF1 Cherry S9200HUF1 Hickory S9200MUF1 Maple 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 Stemware Rack • Panels are 3/4” thick x 7/16” wide with radius edges. • Bottle openings are 4” x 4”. • Easily cut to desired size. • Boxed two pieces per carton (front and back). • 1 pr/box. Sold per pair. • 8mm heavy-gauge wire construction with a hidden mounting plate. • Inner width: 3-1/2”. • 1/box. Sold individually. Product # Depth Width Height Finish Product # Species Width Height 3150-11CR 11” 4-1/4” 1-1/2” Chrome WRL1736AL Alder 17” 36” 3150-11ORB 11” 4-1/4” 1-1/2” Oil Rubbed Bronze WRL1736CH Cherry 17” 36” 3150-11SN 11” 4-1/4” 1-1/2” Satin Nickel WRL1736HI Hickory 17” 36” 3150-16CR 16” 4-1/4” 1-1/2” Chrome WRL1736MA Maple 17” 36” 3150-16ORB 16” 4-1/4” 1-1/2” Oil Rubbed Bronze 36” 3150-16SN 16” 4-1/4” 1-1/2” Satin Nickel 24” 3150-18CR 18” 4-1/4” 1-1/2” Chrome 18” 4-1/4” 1-1/2” Satin Nickel WRL1736RO WRL2430AL Red Oak Alder 17” 30” WRL2430CH Cherry 30” 24” 3150-18SN WRL2430HI Hickory 30” 24” WRL2430MA Maple 30” 24” Quad Stemware Rack WRL2430RO Red Oak 30” 24” WRL2443AL Alder 24” 43” WRL2443CH Cherry 24” 43” WRL2443HI Hickory 24” 43” WRL2443MA Maple 24” 43” WRL2443RO Red Oak 24” 43” • 8mm heavy-gauge wire construction with a hidden mounting plate. • Inner width: 3-1/2”. • 1/box. Sold individually. • 36”L x 12”W. • Solid wood, fully sanded and ready for finishing process. • Features 8 rows of storage and accommodates most stemware styles. • 1/box. Sold individually. Product # Species S9630OUF1 Red Oak S9630MUF1 Maple S9630QUF1 Alder S9630CUF1 Cherry S9630HUF1 Hickory Product # Width Depth Height Finish 3450-11CR 17” 11” 1-1/2” Chrome 3450-11ORB 17” 11” 1-1/2” Oil Rubbed Bronze 3450-11SN 17” 11” 1-1/2” Satin Nickel Double Bottle Rack Wine, Stemware and Plate Racks Stemware Rack KITCHEN ORGANIZERS Wine Bottle Lattice Panel • 8mm heavy-gauge wire construction with a hidden mounting plate. • Inner width: 3-5/8”. • 1/box. Sold individually. TEL 509.535.1663 TOLL-FREE Product # Width Height Finish 3250CR 4-1/4” 9” Chrome 3250ORB 4-1/4” 9” Oil Rubbed Bronze 3250SN 4-1/4” 9” Satin Nickel 800.888.1663 www.spokanehardware.com 211 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Appliance Garages, Wood Tambour and Track Systems Tambour with Track System Corner Appliance Garage • Includes: Tambour Door & Face Frame Style Spring Tension Track System. • 15” or 24” door width x 18” door & track height; 3/4” slats. • Track system consists of two PVC guide rails, wood dowel, donut(s), and tension spring. • Dowels & tambour can be trimmed for narrower widths. • Track system easily stapled to back of face frame. • 1/box. Sold individually. • Overall Size: 17”W x 18-1/2”H x 11-7/8”D • Appliance garage for 24” corners. • Solid wood door mounted to solid wood face frame. • End panels MDF, plain-sliced veneer faced. • Spring Tension Track System features smooth, non-binding operation. • Prefabricated for simple installation. • 1/box. Sold individually. Product # AG-100CSAL AG-100CSH AG-100CSM AG-100CSR Appliance Garages, Wood Tambour and Track Systems 212 Product # Species Width Height C02-SCH-1 Cherry 15” 18” C02-SHI-1 Hickory 15” 18” Species C02-SMA-1 Maple 15” 18” Alder C02-SRO-1 Red Oak 15” 18” Hickory C02-SCH-2 Cherry 24” 18” Maple C02-SHI-2 Hickory 24” 18” Red Oak C02-SMA-2 Maple 24” 18” Euro Corner Appliance Garage Spring Tension Track System Only • Overall Size: 17”W x 18-1/2”H x 11-7/8”D. • Modified solid-look painted tambour door on miter-folded face frame with vinyl laminated end panels. • Spring Tension Track System (ST-2) with smooth, non-binding operation. • Prefabricated for simple installation. • 1/box. Sold individually. • Face Frame Style Spring Tension Track System, easily stapled to back of face frame. • Controls doors up to 36” W x 19” H x .220” thick. • Can be trimmed for narrower widths. • Approximate cabinet opening height: 16 1/2” (guiderail height: 17 1/2”) • Includes: two PVC guide rails, wood dowel, donuts, and tension spring. • NOTE: This product is white, pictured in almond. • 1/box. Sold individually. Product # Finish AG-200CW White TEL 509.535.1663 TOLL-FREE Product # Finish ST-2-36-WH White 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 KITCHEN ORGANIZERS Solid Wood Flat Tambour Solid Wood Flat Tambour w/Beveled Edge w/Radius Edge • 47” Slat length x 24”H or 36” H. • 3/16” H x 3/4” W slats. • Individual solid hardwood slat mouldings bonded to a cloth backer. • Cleaned, pre-flexed, sanded and ready to finish. • Includes: 1-1/2”W lead rail; 36” wide doors also include 1-1/2”W trail slat. • 1 roll/box. Sold per roll. • 16”, 24”, 36” or 48” Slat lengths. • NOTE: Sold in 2ft. wide increments, will come as one continuous roll (up to 8 feet). • 1/4” H x 3/4” W slats. • Individual solid hardwood slat moldings bonded to a strong polypropylene fabric backing. • Sanded and ready to finish. • 1 roll/box. Sold per roll. Species Height Slat Length Alder 24” 47” SW-30-CH503 Cherry 24” 47” SW-30-HI502 Hickory 24” 47” Product # Species Slat Length SW-30-MA512 Maple 24” 47” CT16FR Cherry 16” SW-30-RO511 Red Oak 24” 47” CT24FR Cherry 24” SW-30-AL503 Alder 36” 47” CT36FR Cherry 36” SW-30-HI506 Hickory 36” 47” CT48FR Cherry 48” SW-30-CH514 Cherry 36” 47” MT16FR Maple 16” 47” MT24FR Maple 24” 47” MT36FR Maple 36” MT48FR Maple 48” OT16FR Oak 16” OT24FR Oak 24” OT36FR Oak 36” OT48FR Oak 48” SW-30-MA508 SW-30-RO513 Maple Red Oak 36” 36” Tambour Track System for 3/16” Tambour Tambour Track System for 1/4” Tambour • Accommodates almost any 3/16” thick tambour, thicker tambours must be tenoned. • Designed for flush mounting in vertical or horizontal applications. • Can be fastened with 3/8” staples or pan head type screws (not included). • Made of brown PVC. • 1/box. Sold individually. Product # Description T96-BROWN 96”L Track C51-BR Track Corner TEL 509.535.1663 TOLL-FREE • Accommodates almost any 1/4” thick tambour, thicker tambours must be tenoned. • Designed for flush mounting in vertical or horizontal applications. • Can be fastened with 3/8” staples or pan head type screws (not included). • Made of brown PVC. • 1/box. Sold individually. Product # Description 4T54 48”L Track 4C55 Track Corner 800.888.1663 www.spokanehardware.com Appliance Garages, Wood Tambour and Track Systems Product # SW-30-AL504 213 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Wood Breadboards, Cutting Boards and Accessories Miscellaneous Organizers Heavy Duty Mixer/Appliance Lift Breadboard/Cutting Board • Solid hardwood construction with an alder body. • Electronically laminated and sealed to resist moisture penetration. • Finger pull on each end allows board to be reversible, alder/oak. • Features 3/4” thick board and trimmable width for a custom fit. • 1/box. Sold individually. Product # Width Depth BB1622K 16” 22” BB1822K 18” 22” BB2422K 24” 22” Breadboard Slides Wood Breadboards, Cutting Boards and Accessories 214 • 13/16” channel to accommodates a 3/4” thick board. • Rear bracket can be bent 90° for face frame mounting. • Steel, Zinc plated. • 25 pr/box. Sold per pair. Product # Length 1212112 22-1/2” Knife Holder/Cutting Board Drawer System 4KCB Series - Wood Classics • Combination knife holder/cutting board with full-extension, ball-bearing slides. • No drawer box needed, all you need is drawer front. • Adjustable depth, designed for 24” deep cabinets. • Features 3 divided sections and 7 slot knife holder. • Minimum opening height : 4-3/4”. • 1/box. Sold individually. Product # Width Depth Height 4KCB-18 14-1/2” 22-1/4” 5” 4KCB-21 17-1/2” 22-1/4” 5” 4KCB-24 20-1/2” 22-1/4” 5” TEL 509.535.1663 TOLL-FREE • Features built-in shock dampers and 3 variable spring settings. • NEW! RAS-ML-HDSC: Soft-Close Damper allow it to glide back into the cabinet gently and quietly. • Holds appliances up to 60 lbs. • Installation in full-height base cabinet only. • Shelf not included. • 1 set/box. Sold per set. Product # Description Finish RAS-ML-HDCR Heavy Duty Mixer Lift Silver ML-HDSC Heavy Duty Mixer Lift w/Soft-Close Silver 800.888.1663 www.spokanehardware.com To Order – Call 509.535.1663 or 800.888.1663 3-Prong Pull-Out Towel Bar • Features three bars that pull out together on a friction-free ball bearing carrier. • Left or right hand mount. • Polished chrome finish. • 10/box. Sold individually. Product # Length Width Height P793ANO 17-3/4” 4-13/16” 1-5/16” KITCHEN ORGANIZERS Mixer/Appliance Lift 2 Prong Pull-Out Towel Bar • Swings out of the base cabinet and into its final position flush with the work surface and securely locked in position by a safety device. • For unlocking and swinging-procedure, safety trigger has to be released with both hands. • Tension spring provides for easy operation. Specifications: • Min. inside cabinet width: 10-7/8” to 22-7/8”. • Double spring mechanism for heavier loads and counter balanced lifting capacity of 16 lbs. in motion, 25lbs. locked in final resting position. • 1 set/box. Sold per set. Product # Finish 498-112-80-4151 White Product # Depth Width Height 563-51-C 12-7/8” 3-7/8” 1-1/4” Door Mount Towel Holder • 3 prongs and 12” extension for accessibility. • Mounting is universal for horizontal or vertical installation. • Reversible for non-handed operation. • Includes 1 pull-out towel bar and mounting screws. • 1/box. Sold individually. • Durable 3 tier white epoxy coated rack. • Installs easily with two screws. • White finish. • 10/box. Sold individually. Product # Finish Width Depth Height Product # Width Depth Height 563-47 White 5” 17-3/4” 1-1/4” 563-47C Chrome 5” 17-3/4” 1-1/4” TB-W 12-7/16” 3-3/8” 5-1/2” TEL 509.535.1663 Miscellaneous Organizers 3 Prong Pull-Out Towel Bar • 2 prongs and ball bearing extension for accessibility. • Reversible for non-handed operation. • Includes 1 pull-out towel bar and mounting screws. • Polished Chrome finish. • 1/box. Sold individually. TOLL-FREE 800.888.1663 www.spokanehardware.com 215 Builders Hardware Specialists Since 1945 KITCHEN ORGANIZERS Notes Undersink Drip Tray SBDT Series • Minimum trim size: 25-1/2”W x 21-1/2”D. • Designed for installation in new 30” sink base cabinet construction (can be cut down). • Resistant to most household chemicals. • Wipes clean with ease. • 1/box. Sold individually. Product # Finish Width Depth Height SBDT-2730-S-1 Silver 28-1/2” 23-1/4” 3/4” SBDT-3942-S-1 Silver 40-1/2” 23-1/4” 3/4” Undersink Vanity Drip Tray SBVDT Series Miscellaneous Organizers • Minimum trim size: 19-1/2”W x 18-1/2”D. • Designed for installation in new 24” vanity sink base cabinet construction (can be cut down). • Resistant to most household chemicals. • Wipes clean with ease. • 1/box. Sold individually. Product # Finish Width Depth Height SBVDT-2124-S-1 Silver 22-1/2” 20-1/4” 3/4” SBVDT-2730-S-1 Silver 28-1/2” 20-1/4” 3/4” SBVDT-3336-S-1 Silver 34-1/2” 20-1/4” 3/4” Cabinet Ventilating Louver • Cabinet ventilating louver for apron above sink door. • Includes mounting screws and template. • Opening Size: 9”W x 2-1/2”H. • 10/box. Sold individually. 216 Product # Finish 12-26STN Polished Chrome 10-7/16” TEL 509.535.1663 Length Height 2-7/8” TOLL-FREE 800.888.1663 www.spokanehardware.com