WA600-3 - Komatsu America Corp.

WA600-3
NET HORSEPOWER
336 kW 450HP @ 2000 rpm
OPERATING WEIGHT
46200 – 49400 kg
101,854 – 108,908 lb
BUCKET CAPACITY
5.6 – 7.5 m3 7.3 – 9.8 yd3
WHEEL LOADER
WA600-3
WA600-3
Wheel Loader Features:
W
WALK
ALK-A
-AROUND
ROUND
Komatsu-integrated
design offers the best
Large cab increases operator productivity.
value, reliability, and versatility.
Hydraulics, power train, frame,
and all other major components
are engineered by Komatsu.
You get a machine whose
components are designed
to work together for higher
production, greater reliability,
and more versatility.
Operator’s cab provides better visibility, increased comfort,
see-at-a-glance console, two-door walk-through, and finger-touch
shifting. See page 4.
Retractable
seat belt.
Flat glass cab
windows for
improved visibility.
Special rubber-mounted cab
improves operator’s overall comfort and
productivity. Special silicone-filled rubber cab
mounts reduce vibration, noise, and operator
fatigue. See page 4.
External
mounted
halogen lights.
Cylinder buffer rings
reduce shock loads to
the cylinder packings
and prolong cylinder
life by 30%.
New Optional Electrically
Controlled Suspension
System. Takes the bounce out
of travel on rough ground surfaces.
Provides greater comfort and
confidence for the operator as
well as increased travel speed
and steering stability, while
improving the material
retention in the
bucket.
Higher dumping
clearance with the optional
highlift boom arrangement.
Optional bucket teeth meet
the demands of the toughest
applications.
2
Low mounted bucket hinge pins
are double sealed to provide better
pile penetration and long life.
Automatic transmission
with kick-down and transmission
hold switch is standard. See page 7.
It all adds up to more value and better return
for your investment. It’s what you should
expect when you select Komatsu.
WA600-3
WHEEL LOADER
NET HORSEPOWER
336 kW 450 HP @ 2000 rpm
OPERATING WEIGHT
46200 kg - 49400 kg
101,854 lb - 108,908 lb
Operator’s air ride
seat is standard with a
BUCKET CAPACITY
5.6 – 7.5 m3
7.3 – 9.8 yd3
document holder on seat
back.
Electric power
windows.
New optional
joystick steering
system for precise
control in V-type loading
applications.
Easy access to
engine for servicing.
Large doors lock with cab
key. Easy access to all
engine service points
and filters. See page 8.
Rear-mounted fuel
tank allows for ground
level fueling and large
capacity.
Toolbox for grease
gun and tool storage.
Under hood mounted muffler provides
operator with great rearward vision.
Low mount battery boxes for easy
checking and servicing.
Ground level greasing in centralized service
banks reduces and simplifies maintenance.
The new emissionized Tier 2
Komatsu SAA6D170E-3 diesel
engine provides greater productivity,
serviceability, and reliability. Engine
oil and filter change intervals have
been increased from 250 hours
to 500 hours. See page 6.
3
O
OPERATOR
PERATOR’’S
S
C
COMPARTMENT
OMPARTMENT
Comfortable high-back
bucket seat features:
● Air suspension ride
fabric seat
● Six-way adjustable seat
with armrests, headrest,
and lumbar support to
fit any size operator
● Retractable seat belt
● Rear-mounted
document holder
Ask the person who runs one — they will tell you the operator’s cab sets the
Komatsu wheel loader apart from the others. That’s a productivity feature you can’t ignore. No
matter how a machine specs out or how much is promised for productivity, unless the operator can work a full shift without becoming fatigued, you will never get the full measure of
promised productivity.
The cab improvements on the WA600-3
Avance Plus go beyond providing
a large cab with a comfortable air-ride
seat. Improvements include these
production-enhancing standard
and optional features noted below:
A large flat glass windshield
provides the operator an
unobstructed view of the working
area and attachment.
Electric power windows allow the
operator to open windows without
reaching or leaving the comfortable
air-ride seat.
Two-door, walk-through cab.
Good for ventilation as well as easy entry
and exit from either side of the cab.
Silicone-filled rubber mounts dampen
noise and vibration, reducing fatigue
caused by noise. Helps keep the operator
productive, all day.
Low-effort brake pedals actuate fully
hydraulic brakes. Both the service and
parking brakes are wet-disc type.
Steer with ease. Komatsu’s fully hydraulic
steering provides fast response with low
effort, even at low engine rpm.
Optional joystick/steering wheel control.
The optional joystick and steering wheel
control system provides precise steering
operation. The joystick steering is ideal in
V-type cycle loading, and the steering wheel
is ideal in load and carry operations. The
combination of these two systems provides a
4
convenient, comfortable, and versatile option
to fit all operators and operating conditions.
See the monitor through the steering
wheel, not around it. A specially designed
two-spoke steering wheel allows the operator
to easily see the instrument panel.
Kick-down switch is conveniently
located on the boom lever. A simple
motion of the thumb actuates this
valuable productivity feature.
Automatic transmission. Automatic shift
control gives the operator maximum control
with minimum effort. The transmission hold
switch allows the operator to select either
automatic or manual shifting. The unique
combination of the transmission hold and
kick-down switches, located on the hydraulic
boom lever, offers the operator optimum
control in all conditions.
At-a-glance instrument monitor. Monitor is
mounted in front of the operator and is tilted
for easy view, allowing the operator to easily
check gauges and warning lights.
The EDIMOS II instrument gauge cluster
display monitors all machine functions and
systems, which are only a glance away on
the side panel.
Optional ECSS ride control. This option
is ideal in load and carry operations by
providing a smooth ride in rough ground
surfaces. Productivity is optimized by
improving material retention in the
bucket and increasing operator
comfort and control.
WA600-3
WHEEL LOADER
Increased Visibility and Comfort
Increased visibility and those little added touches that make
work a little easier.
Keep cool, keep productive with a five-mode air conditioner.
Thirteen strategically located vents direct cool air to the
operator, maintaining productivity on even the hottest days.
Five-mode air conditioner
Lunch box holder
There’s nothing more refreshing than a cold drink on a hot
day. The large lunch box holder will help keep your lunch
and beverage cool. That’s something to look forward to at
lunch or break-time.
Make the time go faster with an auto-tuning AM/FM
cassette radio with a digital clock.
AM/FM cassette radio
5
K
DESIGNED
ESIGNED
OMATSU D
KOMATSU
P
POWER
OWER T
TRAIN
RAIN
Engine
The Komatsu SAA6D170E-3 delivers the power and efficiency to get the job done quickly
and cost-effectively while meeting EPA Tier 2 emission regulations.
Komatsu SAA6D170E-3 is a water-
With a piston displacement of 23.15 ltr 1410 in3,
the Komatsu SAA6D170E-3
has a net flywheel horsepower of 336 kW 450 HP
at 2000 rpm.
● Large capacity muffler mounted under
cooled, four-stroke cycle, six-cylinder
the hood reduces noise and increases
in-line, turbocharged, air-to-air aftercooled,
operator visibility.
direct injection engine that produces high
● Wet-type cylinder liners dissipate heat
performance and excellent fuel economy.
better and are replaceable for easier
The gear pump-driven forced lubrication
engine rebuild.
system has full flow filtration while all fuel and
oil filters are spin-on for easy maintenance.
● Dry, two-stage cyclonic air cleaner with
a centrifugal type pre-cleaner.
Komatsu SAA6D170E-3 features include:
Large hinged doors allow easy access to
● Environmentally friendly, meets EPA
the engine for routine maintenance and
and EU emission standards for NOX,
cleaning.
CO, and HC.
Spin-on filters and easily accessible
● Engine oil and filter change intervals
lubrication points reduce maintenance
have been increased from 250 hours
time and the chance of missing
to 500 hours.
maintenance items.
● HPI (High Pressure Injection) system
provides excellent low-speed torque and
optimum fuel efficiency by high injection
pressure and precise timing control.
6
Komatsu-integrated design means
components are matched to provide
the most efficient use of power
whether you’re working the face
of a material bank or traveling
with a loaded bucket.
WA600-3
WHEEL LOADER
APS—Automatic
Power Speed
Hydraulic System
Four-Speed Automatic Transmission
Provides maximum speed of 30.3 km/h 18.8 mph in forward and
32.7 km/h 20.3 mph in reverse. The transmission is a full power shift, automatic
planetary gear transmission.
FAST
Other features include:
● Gear indicator conveniently
● Automatic gear selection with
located on the monitor panel allows
a hold switch on the boom control
the operator to easily check gear-
lever provides control with low effort.
shifts during operations.
● Solid state electronic fingertip
SLOW
● Four forward and four reverse
gears help match cycle conditions,
shifting provides easy directional
providing increased efficiency and
changes from forward to reverse or
fuel economy.
from one gear to another.
During breakout
Loader Pump
Switch Pump
CONTROL VALVE➔
CUTOFF VALVE
➔
Consider this valuable feature for added productivity. With the touch of a
finger, the kick-down switch automatically downshifts from second to first when
the direction control lever is placed in reverse. This results in increased rim pull
When raising the boom
Loader Pump
for better bucket penetration and reduced cycle times for higher productivity.
Komatsu designed axles and final drives provide rugged reliability with low
HYDRAULIC
TANK
Switch Pump
CONTROL VALVE➔
LOADER
➔
beginning the digging cycle. It automatically upshifts from first to second when
LOADER
CUTOFF VALVE
maintenance. Axle shafts are full-floating. The front axle is fixed, while the rear axle is
a center-pin support design that provides a total oscillation of up to 26 degrees.
The differential reduction gear is a heavy-duty spiral bevel gear for strength and
reliable performance. Rugged, outboard planetary final drives carry the total gear
reduction of the drive train to the wheel which is mounted to the axle hub.
Wet multi-disc brakes (front and rear) are fully sealed. Contaminants are
kept out, reducing wear and maintenance. Brakes require no adjustments for
wear, further reducing maintenance costs. There is no air system to bleed, which
APS—Automatic Power
Speed Hydraulic System is
a dual-hydraulic speed system
from Komatsu, which increases
operational efficiency by matching
the hydraulic demands to work
conditions.
eliminates the condensation of water in the system that can lead to contamination
and corrosion. Braking system
reliability is increased with
the use of two independent
hydraulic circuits, providing
hydraulic backup should
one circuit fail.
The parking brake is a dry-disc,
hydraulically-released, springapplied brake, mounted on the
front axle input shaft.
Oil from the switch pump is
completely returned to the tank
when digging and breaking out;
therefore hydraulic flow to the
loader is reduced and pressure is
increased. This reduces horsepower demand from the engine
and makes the operation more
efficient. The result of this new
Avance Dash-3 technology is
greater productivity at the
lowest operating cost.
7
E
EASY
ASY
M
MAINTENANCE
AINTENANCE
Service With a Smile
It would be better if most of us approached routine maintenance and service as something that made us smile. That’s
why Komatsu designed the WA600-3 Avance Plus wheel loader to make servicing as easy as possible. We know by doing this,
routine maintenance and servicing are less likely to be skipped, which can mean a reduction in costly downtime later on. Here
are some of the many service features found on the WA600-3 Avance Plus:
● Large service doors provide easy
access to all engine service points
and filters, and can be locked using
the ignition key.
● Ground Level Greasing—all
grease points are easily reached
from ground level and grease banks
are provided in strategic areas to
reduce maintenance time.
● Large platforms provide easy
access to cab windows.
● Full hydraulic service and parking
brakes eliminate air system
maintenance.
● Sealed Loader Linkage Pins—
designed to keep grease contained
longer and prevent the entrance of
dust, thereby lengthening greasing
intervals.
● Cylinder buffer rings reduce shock
loads to the cylinder packings and
prolong cylinder life by 30%.
● Batteries are located next to the
counterweight for ground level
access.
● Easy to reach toolbox for grease
gun and tool storage.
● Optional automatic lubrication
system and Wiggins fast fuel
system are available to reduce
maintenance time.
8
WA600-3
WHEEL LOADER
S
SPECIFICATIONS
PECIFICATIONS
ENGINE
STEERING SYSTEM
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D170E-3
Meets EPA Tier 2 emissions regulations
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle
Aspiration . . . . . . . . . . . . . . . . . . Turbocharged, air-to-air aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore x stroke . . . . . . . . . . . . . . . . . . . 170 mm x 170 mm 6.7" x 6.7"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . 23.15 ltr 1,410 in3
Governor. . . . . . . . . . . . . . . . . . . . . . . . . Electrical, all-speed control
Horsepower rating @ 2000 rpm
Gross power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 kW 473 HP
Net power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336 kW 450 HP
Fuel system . . . . . . . . . . . . . . . . . . . . . High pressure direct injection
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow
Air cleaner . . . . . . Dry-type with double elements and automatic dust
evacuator, and dust indicator on monitor
TRANSMISSION
Torque converter . . . . . . . . . . . 3-element, single-stage, single-phase
Transmission . . . . . . . . . . Automatic, full power shift, planetary gear
Travel speed (measured with 35/65-33, 24PR (L4) tires):
Forward
Reverse
1st
km/h mph
6.4
4.0
7.1
4.4
2nd
km/h mph
11.1
6.8
12.2
7.6
3rd
km/h mph
18.8 11.7
20.5 12.7
4th
km/h mph
30.3 18.8
32.7 20.3
AXLES AND FINAL DRIVES
Drive system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four-wheel drive
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed, full-floating
Rear . . . . . . . . Center-pin support, full-floating, 26° total oscillation
Reduction gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spiral bevel gear
Differential gear . . . . . . . . . . . . . . . . . . . . . . . . . . Straight bevel gear
Final reduction gear . . . . . . Planetary gear, single reduction, oil bath
BRAKES
Type . . . . . . . . . . . . . . . . . . Articulated, full hydraulic power steering
independent of engine rpm
Steering angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° each direction
Turning radius outside corner of bucket
with teeth or BOCE . . . . . . . . . . . . . . . . . . . . . . . . . . 8280 mm 27'1"
BUCKET CONTROLS
Control positions
Boom . . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
Bucket. . . . . . . . . . . . . . . . . . . . . . . . . . Rollback, hold, and dump
HYDRAULIC SYSTEM
Capacity (discharge flow) @ engine rated rpm
Loader pump. . . . . . . . . . . . . . . . . 492 ltr/min
Switch pump . . . . . . . . . . . . . . . . . 199 ltr/min
Steering pump. . . . . . . . . . . . . . . . 246 ltr/min
130 U.S. gal/min
53 U.S. gal/min
65 U.S. gal/min
Relief valve setting
Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 kg/cm2
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . 210 kg/cm2
3,000 psi
3,000 psi
Control valve
2-spool open center
Hydraulic Number of
Cylinders Cylinders
Boom
2
Bucket
1
Steering
2
Bore
225 mm
8.9"
280 mm
11.0"
130 mm
5.1"
Stroke
1130 mm
44.5"
710 mm
28.0"
529 mm
20.8"
Hydraulic cycle time = 14.6 sec
Raise…7.9 sec Dump…2.4 sec Lower (empty)…4.3 sec
SERVICE REFILL CAPACITIES
Cooling system . . . . . . . . . . . . . . . . . . . . . . 142 ltr
Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . 670 ltr
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 ltr
Hydraulic system . . . . . . . . . . . . . . . . . . . . . 345 ltr
Axle (each front and rear). . . . . . . . . . . . . . . 124 ltr
Torque converter and transmission . . . . . . . . 110 ltr
37.5 U.S. gal
177 U.S. gal
15.8 U.S. gal
91 U.S. gal
32.8 U.S. gal
29.1 U.S. gal
Service brakes: Hydraulically-actuated, wet multi-disc brakes
actuate on four wheels.
Parking brake: Dry-disc, hydraulically-released, spring applied
on front axle input shaft.
9
DIMENSIONS
2650 mm
8'8"
Width over tires
3570 mm
11'9"
A
Wheelbase
4100 mm
13'5"
B
Hinge pin height, maximum height
Standard boom,
Highlift boom
Load and carry
5155 mm
5770 mm
4850 mm
16'11"
18'11"
15'11"
F
G
E
Reach
A
35/65-33, 24PR (L4)
Tread
B
C
Dumping Clearance
Tires
C
Hinge pin height, carry position
670 mm
2'2"
D
Ground clearance
495 mm
1'7"
E
Hitch height
1295 mm
4'3"
F
Overall height, exhaust stack
4125 mm
13'6"
G
Overall height, ROPS cab
4250 mm
13'11"
Unless otherwise indicated, specs are with teeth and 35/65-33, 24PR (L4) tires, steel cab, ROPS canopy, lubricant, full fuel, optional counterweight, and operator.
Bucket Capacity
Bucket Width
Bucket Weight
Static Tipping Load
Dumping Clearance, Maximum
Height and 45° Dump Angle
Reach at 2130 mm 7' Cut Edge
Clearance and 45° Dump Angle
Reach at Maximum Height
and 45° Dump Angle
Reach with Boom Horizontal
and Bucket Level
Operating Height
Overall Length
Turning Radius*
Digging Depth
SAE rated
Struck
Straight
40° full turn
Fully raised
Bucket at ground
Bucket at carry
0°
50°
Breakout Force (bucket cylinder)
Operating Weight
Standard Boom
Spade Nose with Teeth
6.1 m3
8.0 yd3
5.1 m3
6.7 yd3
3685 mm
12'1"
4270 kg
9,411 lb
33300 kg
74,414 lb
29410 kg
64,838 lb
High Lift Boom
Straight Edge with BOCE
5.6 m3
7.3 yd3
4.9 m3
6.4 yd3
3685 mm
12'1"
4005 kg
8,830 lb
29400 kg
64,816 lb
25900 kg
57,100 lb
Load and Carry
Spade Nose with Teeth
7.5 m3
9.8 yd3
6.8 m3
8.9 yd3
3685 mm
12'1"
5075 kg
11,185 lb
38900 kg
85,760 lb
34300 kg
75,619 lb
3350 mm
11'0 "
4460 mm
14'8"
2920 mm
9'7"
2790 mm
9'2"
2861 mm
9'5"
2580 mm
8'6"
1990 mm
6'6"
1505 mm
4'11"
2105 mm
6'11"
3830 mm
7165 mm
11404 mm
11196 mm
8260 mm
50 mm
470 mm
37653 kg
46200 kg
12'7"
23'6"
37'5"
36'9"
27'1"
2"
1'6"
83,010 lb
101,854 lb
3643 mm
7720 mm
11369 mm
11585 mm
8850 mm
130 mm
410 mm
42550 kg
46300 kg
11'11"
25'4"
37'4"
38'0"
29'0"
5"
1'4"
98,216 lb
102,074 lb
3815 mm
7065 mm
11404 mm
11395 mm
8225 mm
105 mm
505 mm
35400 kg
49400 kg
12'6"
23'2"
37'5"
35'5"
27'0"
4"
1'8"
78,022 lb
108,908 lb
● Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers.
SAE standard J732c and J742b.
● Static tipping load and operating weight shown include 35/65-33, 24PR (L4) tires, enclosed cab, ROPS canopy, lubricant,
full fuel tank, optional counterweight, and operator.
● Machine’s stability and operating weight are affected by counterweight, tire size, and other weight changes to operating
weights and static tipping load.
● Load and carry arrangement includes 35/65-33, 42PR tires.
*Turning radius measured with bucket at carry position, outside corner of bucket.
Weight Changes
Remove ROPS cab
35/65-33, 24PR (L5) tubeless tires
35/65-33, 30PR (L5) tubeless tires
35/65-R33 XLDD1 (L4) radials
35/65-R33 XLDD2 (L5) radials
Remove counterweight
Change in
Operating Weight
–1,764 lb
–800 kg
+2,510 lb
+1140 kg
+2,805 lb
+1275 kg
+530 lb
+240 kg
+1,200 lb
+545 kg
–2,200 lb
–1000 kg
Change in Static Tipping Load for Standard Boom
Straight
Full Turn
–1,543 lb
–700 kg
–1,356 lb
–615 kg
+1,738 lb
+790 kg
+1,565 lb
+695 kg
+1,947 lb
+885 kg
+1,720 lb
+780 kg
+357 lb
+162 kg
+278 lb
+126 kg
+808 lb
+366 kg
+633 lb
+287 kg
–5,072 lb
–2300 kg
–4,466 lb
–2030 kg
● All dimensions, weights, and performance values based on SAE J732c and J742b standards.
10
WA600-3
WHEEL LOADER
BUCKET SELECTION GUIDE
m3
yd3
15
10.70
14
9.94
13
9.23
12
8.46
11
7.70
10
6.90
9
6.19
8
5.39
7
4.62
6
3.85
5
3.08
4
WA600-3
90
11.47
%
Bu
ck
l
Bu
ck
et
10
F il
l
5%
Bu
ck
et
F il
Bucket Size
F il
0%
et
10
8.0 yd3
6.1 m3
GP Bucket
l
3
lb/yd3 1,000
kg/m3
2,000
600
1200
3,000
1500
1800
4,000
Material (loose weight)
Clay and gravel, dry
Clay and gravel, wet
Coal, anthracite, broken
Coal, bituminous, broken
Earth, dry, packed
Earth, loam
Earth, wet, excavated
Granite, broken or large crushed
Gravel, dry
Gravel, dry 13 to 50 mm 1/2" to 2"
Gravel, pit run (graveled sand)
Gravel, wet 13 to 50 mm 1/2" to 2"
Limestone, broken or crushed
Phosphate rock
Sand and gravel, dry
Sand and gravel, wet
Sand, dry
Sand, wet
Stone, crushed
Topsoil
kg/m3
1420
1540
1100
830
1510
1250
1600
1660
1510
1690
1930
2020
1540
1280
1720
2020
1420
1840
1600
950
lb/yd3
2,400
2,600
1,850
1,400
2,550
2,100
2,700
2,800
2,550
2,850
3,250
3,400
2,600
2,160
2,900
3,400
2,400
3,100
2,700
1,600
2100
Material Density lb/yd3 kg/m3
This guide, representing bucket sizes not necessarily manufactured by
Komatsu, will help you select the proper bucket size for material density,
loader configuration, and operating conditions. Optimum bucket size is
determined after adding or subtracting all tipping load changes due to optional
equipment. Bucket fill factors represent the approximate amount of material as
a percent of rated bucket capacity. Fill factors are primarily affected by
material, ground conditions, breakout force, bucket profile, and the cutting
edge of the bucket used.
STANDARD EQUIPMENT
●
●
●
●
●
●
●
●
●
●
Air conditioner with heater and defroster
Alternator, 75 A
Axles, full floating
Batteries, 2 x 12 V/200 Ah
Brakes
—parking, dry disc
—service, wet, multiple disc
Bucket positioner (automatic)
Cab with ROPS/FOPS canopy
Counterweight, standard
Electronic display/monitoring system
Fenders, front and partial rear
● Hitch
● Horn, electric
● Lights
—back up
—stop and tail
—turn signal with hazard switch
(2 front, 2 rear)
—working (4 front, 2 rear)
● PPC hydraulic controls
● Rearview mirror
● Seat, air suspension
● Seat belt, 76 mm 3" wide with retractors
●
●
●
●
●
●
●
●
Steering, full hydraulic power
Steering wheel, tilt
Tires 35/65-33, 24PR (L4)
Transmission, full power shift, automatic
(4F, 4R), planetary soft shift
2 starting motors, 24 V 7.5 kW direct
electric
Vandalism protection kit
Washer, front and rear
Wiper, front and rear, front intermittent
OPTIONAL EQUIPMENT
●
●
●
●
Additional counterweight, 1000 kg 2,200 lb
Autolube system
Auxiliary steering kit
Bolt-on cutting edge for straight-edge
bucket
● Bucket
—5.6 m3 7.3 yd3 straight edge for
high lift rock
—6.1 m3 8.0 yd3 spade nose rock
—6.1 m3 8.0 yd3 straight-edge rock
—7.5 m3 9.8 yd3 spade nose rock
(load and carry)
● Bucket cylinder, large
● ECSS (Electronically Controlled
Suspension System)
● High-pressure in-line filter
● Hydraulic adapter kit, includes 3-spool
valve, lever, and piping
● Joystick steering control
● Logging arrangement
● High lift arrangement
● Load & carry arrangement
● Radio, AM/FM with cassette and antennas
● Tires (bias ply)
—35/65-33, 24PR (L5)
—35/65-33, 30PR (L5)
● Tires (radial ply)
—35/65 R33 XLDD1 (L4)
—35/65 R33 XLDD2 (L5)
● Wiggins fast fuel fill
11
S
SUPPORT
UPPORT
Count on Komatsu and your
local distributor for the support
you deserve. Our success
depends on satisfying your need
for productive equipment and
supporting that equipment.
That’s why we have one of the
largest and strongest heavyequipment distributor organizations in North America. Their
personnel are not only trained
to help you select the equipment
that is best-matched for your
business but to support
that equipment.
AESS588-02
Finance Through
its finance company,
Komatsu can offer you a
wide variety of financing
alternatives designed to meet
your needs. Programs include
municipal leases for governmental
agencies, conditional sales contracts,
and leases with $1 purchase options
for customers interested in owning their
equipment. Ask your distributor about
Komatsu leasing. We offer finance and
operating leases and the unique Advantage
Lease which offers you predetermined purchase, return, and renewal options.
Parts Three computer-linked parts
distribution centers provide fast access
to anywhere in the U.S. and Canada. Most
parts are available overnight. Plus, Komatsu
distributors keep a large assortment of
commonly used parts in stock for
immediate access.
©2003 Komatsu Printed in USA
DK2(5M)C DataKom
Remanufactured
parts Save money and
still have the same warranty as new
parts at a fraction of the cost with
like-new remanufactured parts.
Maintenance Take advantage of the experience we have
gained and ask your distributor about
our factory-supported programs including:
regular scheduled maintenance, oil and
wear analysis, diagnostic inspections,
undercarriage inspections, training,
special service tools, parts programs,
and even a special software program
to help your distributor keep track
of and manage service-related data.
02/03 (EV-2)
440 N. Fairway Drive
P.O. Box 8112
Vernon Hills, IL 60061
www.KomatsuAmerica.com
Materials and specifications are subject to change without notice
is a trademark of Komatsu Ltd. Japan