liteform - Pilosio

built build
to
sLABS
LITEFORM
LITEFORM
SLABS
Slabs_LITEFORM
LITEFORM and the new reinforcement system for
traditional slabs and slabs cast in place present the
advantages of improving efficiency, reducing the
assembly time and increasing safety on site.
338
Company | Projects | Products
LITEFORM
Formworks for slabs
It is a security lightweight formwork for traditional and cast in site slabs, it has been
designed with the purpose to increase safety on site, improve productivity and reduce slab
implementation times. The system is especially suited for residential construction with rafter
and hollow block slabs but it is also suitable for monolithic concrete slab.
Safe (it is assembled from below), handy and easy to be assembled (aluminium panels are very
light), modular and highly productive, LITEFORM is the reinforcement system for slabs ideal for
small and medium-companies for any type of slabs.
339
Slabs_LITEFORM
The use of the LITEFORM system increases
the safety and tidiness on site.
340
Company | Projects | Products
SAFE
d !#%& "*")"*'2($1*")*1"#))"% '>)))"% '?*"(%"))"% '
takes place from the bottom with no risk of falling from above*
d *" ("2!" )&!$1 "*,""$ *" (%" )*($1"() #,) &#)*#$$1 *" (!0
or plywood slab for casting safely the monolithic slabs. The clearance between
stringers is only 85 mm
d*"(%")+"$#$C) &)2(!"** #,),#(0$1)" '"+"$,*,"*)2(!"
d*"$$"))$("2!","1*#$+2 !#%&#$"$*)$ 2%$2%("2!"
the assembly and disassembly times
d *" %#2 (*' # *" )')*"% $ *) ")$")) *# " ))"% " #,) 1
productivity
d,**"2)"#& ',##&$" ) !!#($1*#*"")1$>*"%#$# *!) )
a smooth finish
d",!!"))#(") #,!("*$1%2 *& "1"#%"*(")$)%& "$$*2*+",'?*"
frames can be reinforced in longitudinal and transverse direction
d *" )&"! )%$* $1 " # LITEFORM allows increasing the productivity of
the site, recovering during the dismantling stage all the panels just after a few
days from casting and leaving only the props for concrete consolidation. With the
material recovered, and with the addition of another set of props, it is possible to
reinforce another portion of slab
d*"3""$(#&"!$"2* .",*$'*'&"#&(#&)&(")"$*#$)*"
d*"LITEFORM frames allow reaching any measure.
LIGHT
MODULAR
PRODUCTIVE
LITEFORM
* The EEC regulating accident prevention in the workplace establishes serious penalties for
companies that do not adopt safety systems. The Liteform system has been designed to safeguard
the personnel involved from any danger of falling from a height.
341
Formworks for slabs
STRENGTHS
Slabs_LITEFORM
CHARACTERISTICS
Weight of LITEFORM falling head 5.3 kg.
It is suitable for monolithic slabs up to 26 cm thick (without lightening)
and conventional brick slabs.The expected loads can change from 4.5
to 7.0 KN/m2 with values for single prop from 9 to 15 kN. It included the
use of Class B or Class D props (according to EN 1065).
It can be used with any type of Liteform shore head. A special latch
prevents accidental release of the head from the shore.
+"$*")."#*"(%"><553455!%>*))2!"$*%$% amount of props (1 every 2 m2) to significantly reduce the material to
be handled with respect to traditional reinforcements.
Weight of LITEFORM fixed head 2.0 kg.
LITEFORM SYSTEM WITH VERY FEW COMPONENTS AND REDUCED WEIGHT
Aluminium frames
cm
Weight
kg
Aluminium infill
panels cm
Weight
kg
200x100
19,0
3 bars 180x30
6,8
200x75
15,1
3 bars 150x30
5,8
200x50
9,8
2 bars 180x30
4,4
2 bars 150x20
3,8
*Class B steel props are recommended pursuant to EN1085 Standard.
342
Steel props
cm*
180/300
load 13,33 – 30 kN
200/350
load 11,43 – 30 kN
Weight
kg
15
19
Company | Projects | Products
343
Slabs_LITEFORM
ASSEMBLY
Before installation, the props must be reinforced with the related dismantling heads or fixed head.
It is sufficient to insert the head into the props the hooking device, prevents the accidental ejection and rotation of the head. Reinforce the
props with the related dismantling or fixed heads and place a first row of props by using the tripods (Fig. 1). Position the frames on the heads (it is
)2!"$*#$ '#$"#&"(*#(L?*")&"! ##0$1 #,))"$)* *#$>,*#2*()0#!!"$* ) &&$1#2*#*""(#%*"&(#&K1=<L=
The positioning of the frames on the heads can be carried out through a rotation of the frame by using the forklift. This operation completes
the reinforcement of the slab (Fig. 3). To reinforce brick or prefabricated slabs, the installation of all components is performed safely directly
on LITEFORM frames, the casting completes the work stage (Fig. 4). For the reinforcement of monolithic slabs, it is necessary to use a counter
casting surface in plywood or other panels placed directly on LITEFORM frames; then proceed with the reinforcement and casting.
Thanks to a device equipped on the dismantling head, it is possible to perform dismantling just a few days after casting (Fig. 5). Once the drop
heads have been lowered, all frames are recovered to reuse them in the subsequent stages and a new cycle of production can start (Fig. 6).
344
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Formworks for slabs
Company | Projects | Products
345
Slabs_LITEFORM
The modularity and lightness of LITEFORM system
is useful also for restoration operations.
346
Company | Projects | Products
2000
1000
1000
1000
1000
2000
R
R
2000
2000
Scheme with beams R.
Load on frame
with section
breakers
R kN
Load on prop
with section
breaker R**
kN
Maximum
deformation with
section breaker
R mm
8.75+2x0.15
17.8
9.94
2.1
40
10.0+2x0.15
20.3
11.34
2.4
45
11.25+2x0.15
22.8
12.75
2.7
50
12.5+2x0.15
25.8
14.16
3
Floor
thickness
cm
Weight+
overload+*
kN/m2
Total load
on frame
kN
Maximum load
on prop
kN
Maximum
deformation
mm
14
3.5+2x0.15
7.3
7.3
3.7
16
4+2x0.15
8.3
8.3
4.2
18
4.5+2x0.15
9.3
9.3
4.7
20
5+2x0.15
10.3
10.3
5.2
22
5.5+2x0.15
11.3
11.3
5.75
24
6+2x0.15
12.3
12.3
6.3
28
7+2x0.15
14.3
14.3
7.3
30
7.5+2x0.15
15.3
15.3
7.8
35
* Workers overload: 2x0.15 kN.
** under operating conditions.
347
Formworks for slabs
Standard scheme.
Slabs_LITEFORM
ART.
DIM. MM
TECHNICAL CHARACTERISTICS
KG
LITEFORM
ALUMINIUM FRAME
491100200
491075200
491050200
ART.
DIM. MM
KG
LITEFORM
ALUMINIUM INFILL FRAME 2 BARS AND 3 BARS
2000x1000
2000x750
2000x500
19.8
15.1
9.8
492002180
492002150
492003180
492003150
1800x200 (A)
1500x200 (A)
1800x300 (B)
1500x300 (B)
ART.
DIM. MM
KG
LITEFORM
ALUMINIUM INFILL FRAME 7 BARS
4.4
3.8
6.8
5.8
492007180
492007150
1800x200 (A)
1500x200 (A)
4.4
3.8
1090
5.9
-
4.0
A
B
HOT GALVANIZED OUTER RING NUT PROPS
ACCORDING TO EN1065 REGULATION
LITEFORM
QUICK DISMALTING HEAD
496000000
-
5.3
LITEFORM
FIX HEAD
496000010
348
51B30FEZC
load 12-27 kN (class B)
ø int. 48.0 - ø est. 60.0
51B35FEZC
load 12-27 kN (class B)
ø int. 48.0 - ø est. 60.0
51D30FEZC
load 20-35 kN (class C/D)
ø int. 48.0 - ø est. 60.0
51D35FEZC
load 20 kN (class C/D)
ø int. 63.0 - ø est. 76.0
TRANSOM
LITEFORM
1700-3000
15.0
2000-3500
19.0
1700-3000
16.0
2000-3500
22.0
494000100
4-WAYS
HEAD
-
2.0
518020
Accessories and spare parts on page 424
TECHNICAL CHARACTERISTICS
DIM. MM
KG
TRIPOD
FOR PROPS
518900
DIM. MM
KG
SLABFORM PVC
INFILL PROFILE
-
8.5
LITEFORM
WALL SUPPORTING ANCHOR COMPLETE
K497000010
N° 1 S19 tie-rod of 750
N° 1 S19 wing nut
ART.
50700100
50700075
50700050
10.7
596020
DIM. MM
KG
LITEFORM
FRAME-FRAME ALIGNING CONNECTOR
1000
750
500
1.09
0.83
0.54
VARIABLE
GUARDRAIL POST
-
ART.
495000020
-
0.6
2100-4000
3.0
LITEFORM
ASSEMBLY FORK
-
7.0
498000000
Formworks for slabs
ART.
Company | Projects | Products
349
Slabs_LITEFORM
ART.
DIM. MM
TECHNICAL CHARACTERISTICS
KG
YELLOW
PANELS 27
10220050
10230050
350
ART.
DIM. MM
KG
PLYWOOD SHEET
21 AND 27
27x500x2000
27x500x3000
13.0
19.5
09010000
09010016
ART.
DIM. MM
KG
800x1800x1500
38.44
ALUMINIUM MOBILE TOWER
COMPACT 170
21x1250x1500
27x500x2500
26.8
23.0
K81COM170
Accessories and spare parts on page 424
Company | Projects | Products
351
Via E. Fermi, 45 - 33010 Feletto Umberto - Tavagnacco (UD) - Italy
Tel. +39 0432 435311 - Fax +39 0432 570474
www.pilosio.com - info@pilosio.com