M Select 2008 oil pump final

Transcription

PREMIUM
PERFORMANCE PARTS
WARRANTY DISCLAIMER
DUE TO INTENDED USAGE OF PERFORMANCE APPLICATIONS, THE PARTS IN THIS CATALOG ARE
SOLD WITHOUT ANY EXPRESS WARRANTY OR IMPLIED WARRANTY OR MERCHANTABILITY OR
FITNESS FOR THE INTENDED PURPOSE. INSTALLATION OF PARTS INTENDED FOR “OFF
HIGHWAY” USE. INSTALLATION OF THESE PARTS COULD AFFECT THE VEHICLE MANUFACTURER
WARRANTY COVERAGE.
The Melling engine Parts warranty does not consider low or no oil pressure grounds for
extensive engine repairs nor complete replacement of damaged engines. This consideration is
based on the fact that all vehicles have as standard equipment, either warning lights or
gauges, which is to warn the operator of low oil pressure, low oil level or no oil pressure prior
to the occurrence of the engine damage. If an operator chooses to ignore these gauges or
warning lights or if the gauges or warning lights are not in operating condition, this constitutes
negligence on the operators part. Therefore Melling Engine Parts cannot be responsible for
the cost of these extensive damages.
NOTE: it is illegal to use Melling performance camshafts in vehicles that are operated on the
public streets and highways of California. Various other federal and state laws may limit the
use of these camshafts to “off highway” applications only. Check current state and federal
laws to be sure.
1
TABLE OF CONTENTS
1
3
5
12
13
WARRANTY
OIL PUMP/SCREEN COMPARISON CHART
OIL PUMP ATTRIBUTES GUIDE
PERFORMANCE TIMING GUIDE
SPECIALITY TOOLS & ENGINE ASSEMBLY LUBE
PARTS APPLICATION INFORMATION
AMERICAN MOTORS & JEEP
BUICK
CHEVROLET CARS AND TRUCKS
CHRYSLER/DODGE/DODGE TRUCK/PLYMOUTH
FORD/FORD TRUCKS/LINCLON-MERCURY
ISUZU
OLDSMOBILE
PONTIAC
TOYOTA
14
16
19
90
97
112
113
118
124
PUSHROD IDENTIFICATION CHART
VALVE SIZE CHART
VALVE SPRING RETAINER
VALVE SPRING CHART
ROCKER ARM STUD CHART
CYLINDER SLEEVES
PUSH ROD GUIDE PLATES
CAMSHAFT SPECIFICATIONS
NUMERICAL LISTING
ENGINE HARDWARE FINISHING KITS
PERFORMANCE CAM BEARINGS
OIL PUMP SCREEN IMAGES
126
126
127
127
128
128
129
130
147
153
154
155
KEY TO ABBREVIATIONS
ADD’L
ALUM.
BRG.
COMP.
CYL.
DIA.
ENG.
EXC.
EXH.
FWD
ADDITIONAL
ALUMINUM
BEARING
COMPRESSION
CYLINDER
DIAMETER
ENGINE
EXCLUDING
EXHAUST
FRONT WHEEL DRIVE
H.D.
HI
HO
HT
HYD.
INT
I/S
MECH
O/S
RWD
HEAVY DUTY
HIGH
HIGH OUTPUT
HEIGHT
HYDRAULIC
INTAKE
INTERMEDIATE SHAFT
MECHANICAL
OVERSIZE
REAR WHEEL DRIVE
SPEC
STD
VEL
VOL
W/
WT
2BC
4BC
6BC
SPECIAL
STANDARD
VELOCITY
VOLUME
WITH
WEIGHT
2 BARREL CARBURETOR
4 BARREL CARBURETOR
6 BARREL CARBURETOR
NOTE: This catalog is consistantly reviewed and compiled from sources we regard as reliable. However, we can not assume any responsibility for errors in
identification, suggested application, or interchange listings. All Melling parts described in this catalog are intended for replacement parts only. There is no
intent by Melling Engine Parts or Melling Select Performance to represent any item as a product of any OE car manufacturer.
2
PERFORMANCE OIL PUMPS
GM SMALL BLOCK V-8
Part No.
10550
Volume
Increase
25%
10551
25%
10552
10552C
10555
10555C
10%
10%
25%
25%
10553
0%
10554
0%
10550-750SS
10550-825SS
10550-700CT
10990
10990C
25%
25%
25%
25%
25%
Shaft Screw-in Provision For Anti-Cavitation
Associated
Tube Dia.
Support Valve Plug Bolt-on Screen
Screen Number (Inches)
Grooves
5/8
55-S1
5/8
55-S2
5/8
55-S3
5/8
210S
5/8
220S
3/4
Mag Phosphate
155S
3/4
211S
3/4
213S
3/4
221S
3/4
243S
3/4
244S
3/4
245S
3/4
251S
3/4
258S
3/4
259S
X
Mag Phosphate
X
X
3/4
155S
X
Mag Phosphate
X
X
X
3/4
211S
X
Mag Phosphate
X
X
3/4
213S
X
Mag Phosphate
X
X
3/4
221S
3/4
243S
3/4
244S
3/4
245S
3/4
251S
3/4
258S
259S
3/4
12557
3/4
12558
3/4
12559
3/4
12564
3/4
12566
3/4
Mag Phosphate
55-S1
5/8
55-S2
5/8
55-S3
5/8
210S
5/8
220S
5/8
Mag Phosphate
155S
3/4
211S
3/4
213S
3/4
221S
3/4
243S
3/4
244S
3/4
245S
3/4
251S
3/4
258S
3/4
259S
3/4
N/A
Hardcoat Anodize
X
X
N/A
N/A
N/A
Hardcoat Anodize
X
X
N/A
N/A
N/A
Hardcoat Anodize
X
X
N/A
N/A
Mag Phosphate
X
X
241S
3/4
Mag Phosphate
X
X
X
305S
3/4
Coatings
Mag Phosphate
Pan
Depth
7.5”
8”
7.5”
10”
7.75”
7.5”
10”
8.5”
7.5”
7.75”
7.75”
10”
8”
8.5”
9.5”
7.75”
10”
8.75”
7.75”
8”
8”
10”
8”
8.5”
9.75”
7”
7.5”
8”
7”
7.5”
7”
7.75”
7”
9.5”
7.25”
7.25”
9.5”
8.25”
7.25”
7.25”
7.25”
9.5”
7.5”
8’
9.25”
N/A
N/A
N/A
N/A
N/A
NOTE: SCREEN TO PAN CLEARANCE DISTANCE CAN VARY DUE TO PAN GASKET THICKNESS
3
PONTIAC SMALL BLOCK V-8
Part No.
10540
10541
Volume
Increase
0%
0%
Coatings
Mag Phosphate
Mag Phosphate
Shaft
Support
Screw-in
Valve Plug
X
X
Bolt-on
Screen
Anti-Cavitation
Grooves
Associated
Screen Number
54-DS
54-DS
Screen
Inlet Dia. (Inches)
3/4
3/4
Do not use the 54-DS screen with an OEM replacement pump.
GM GEN III & IV 4.8L, 5.3L • LS1 & LS6 5.7L • LS2 6.0L • LS3 6.2L
Part No.
10295**
Volume
Increase
0%
10296**
18%
Shaft
Coatings
Support
Hardcoat Anodize
Screw-in
Valve Plug
X
Bolt-on
Screen
X
X
X
Hardcoat Anodize
Anti-Cavitation
Grooves
Associated
Screen Number
303S
304S
303S
304S
Screen
Inlet Dia. (Inches)
7/8
7/8
7/8
7/8
** 303S - Corvette applications, 304S Camaro applications only.
GM GEN IV LS4 5.3L • L92 VORTEC 6.2L V-8
Part No.
10355
Volume
Increase
0%*
Shaft
Coatings
Support
Hardcoat Anodize
Screw-in
Valve Plug
X
Bolt-on
Screen
X
Anti-Cavitation
Grooves
Associated
Screen Number
324S
Screen
Inlet Dia. (Inches)
7/8
*33% more volume than the 10295
GM BIG BLOCK V-8 continued
Part No.
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
Volume
Increase
Inlet Dia.
(Inches)
25%
0%
0%
25%
25%
25%
25%
3/4
3/4
3/4
3/4
3/4
Coatings
Shaft
Support
Screw-in
Valve
Plug
X
X
X
X
X
X
Mag Phosphate
Mag Phosphate
Mag Phosphate
Mag Phosphate
Mag Phosphate
Hardcoat Anodize
Hardcoat Anodize
AntiCavitation
Grooves
X
FORD SMALL BLOCK V-8
Part No.
10687
10688
Volume
Increase
0%
25%
Coatings
Mag Phosphate
Mag Phosphate
CNC
Machined
X
X
Screw-in
Valve
Plug
X
X
Extended
Drive
Shaft
X
X
Doweled
Cover
X
X
Associated
Screen
Number
68-S
68-S3
68-S4
68-S5
Screen
Inlet Dia.
(Inches)
5/8
5/8
5/8
5/8
Associated
Screen
Number
83-S
83-S1
Screen
Inlet Dia.
(Inches)
5/8
5/8
NOTE: Consult the Melling stock catalog if needed for detailed listings for screen applications.
FORD BIG BLOCK V-8
Part No.
10832
10833
Volume
Increase
0%
25%
Coatings
Mag Phosphate
Mag Phosphate
CNC
Machined
X
X
Screw-in
Valve
Plug
X
X
Extended
Drive
Shaft
X
X
NOTE: Consult the Melling stock catalog if needed for detailed listings for screen applications.
4
Doweled
Cover
X
X
FORD 4.6L SOHC / DOHC
Part No.
10176
10227
Volume
Increase
0%
8%**
Coatings
Hardcoat Anodized
Hardcoat Anodized
Screw-in
Valve
Plug
X
X
Provision
For Bolt-on
Screen
X
X
Associated
Screen
Number
335S
335S
Screen
Inlet Dia.
(Inches)
15/16
15/16
** 8% Additional volume when used in the 4.6-X SOHC application / standard volume when used in the 4.6 DOHC Cobra application.
CHRYSLER 2.0L
Part No.
10190
Volume
Increase
20%
Coatings
Mag Phosphate
Screw-in
Valve
Plug
X
Provision
For Bolt-on
Screen
X
Associated
Screen
Number
262S
330S
331S
Screen
Inlet Dia.
(Inches)
3/4
3/4
3/4
Associated
Screen
Number
331S
Screen
Inlet Dia.
(Inches)
1.0
CHRYSLER 5.7L & 6.1L HEMI
Part No.
10342
Volume
Increase
0%
Coatings
Hardcoat Anodize
Screw-in
Valve
Plug
X
Provision
For Bolt-on
Screen
X
PERFORMANCE OIL PUMP GUIDE
GM S.B. PERFORMANCE OIL PUMP LINE
10550
High volume performance upgrade for M-55HV. 25% increase in volume over stock oil pump. The
10550 housing and cover are CNC machined and phosphate coated. The lower pressure spring is
included to reduce pressure if desired. Includes intermediate shaft with steel guide. Uses 5/8” press
in screen.
10551
High volume performance upgrade for M155HV. 25% increase in volume over stock oil pump. The
10551 housing and cover are CNC machined and phosphate coated. The lower pressure spring is
included to reduce pressure if desired. Includes intermediate shaft with steel guide. Uses 3/4” press
in screen.
10552
High volume performance oil pump. 10% increase in volume over stock oil pump. The 10552 is
manufactured with the drive and idler shafts extended to allow for additional support in the cover
eliminating dynamic shaft deflection at increased RPM levels. The cover is doweled to the pump housing
to assure alignment of the shaft bores. Screw in plug retains relief valve spring instead of pin. Relief hole
in cover uses screw in plug instead of pressed cup plug. All bolts are self locking socket heads, with the
wrench supplied. The housing and cover are CNC machined and phosphate coated. Includes intermediate
shaft with steel guide. Uses both 3/4” bolt on or press in screen. The lower pressure spring is included to
reduce pressure if desired.
Patent No. 5,810,571
10552C (Anti-Cavitation)
High volume performance oil pump. 10% increase in volume over stock oil pump. Same as the
10552 with the addition of grooves machined in the body and cover. The grooves reduce cavitation effects in
high RPM applications. Includes intermediate shaft with steel guide. Uses both 3/4” bolt on or press in screen.
Using this oil pump will reduce pressure at idle. The 10552C uses the high pressure spring only.
Racing Applications Only.
5
GM S.B. PERFORMANCE OIL PUMP LINE
10553
High pressure performance upgrade for M-55 & M-55A. Standard volume oil pump. The 10553
housing and cover are CNC machined and phosphate coated. Manufactured with pink spring installed
for higher pressure (M-55A). To change pump to lower pressure (M-55) install the supplied yellow spring.
Includes intermediate shaft with steel guide. The 10553 uses a 5/8” press in screen.
10554
Performance upgrade for M155. Standard volume oil pump. The 10554 housing and cover are CNC
machined and manganese phosphate coated. Manufactured with pink spring installed for higher
pressure. To change pump to lower pressure install the supplied yellow spring. Includes intermediate shaft
with steel guide.The 10554 uses a 3/4” press in screen.
10555
High Volume performance upgrade for the 10550 oil pump. 25% increase in volume over stock
oil pump. The 10555 is manufactured with the drive and idler shafts extended to allow for additional
support in the cover eliminating dynamic shaft deflection at increased RPM levels. The cover is doweled
to the pump housing to assure alignment of the shaft bores. Screw in plug retains relief valve spring
instead of pin. Relief hole in cover uses screw in plug instead of pressed cup plug. All bolts are self locking
socket heads, with the wrench supplied. The housing and cover are CNC machined and manganese
phosphate coated. Includes intermediate shaft with steel guide. Uses both 3/4” bolt on or press in screen.
The lower pressure spring is included to reduce pressure if desired.
High volume performance upgrade for the 10550 oil pump. 25% increase in volume over stock oil
pump. Same as the 10555 with the addition of grooves machined in the body and cover. The grooves reduce
cavitation effects in high RPM applications. Includes intermediate shaft with steel guide. Uses both 3/4” bolt on
or press in screen. Using this oil pump will reduce pressure at idle. The 10555C uses the high pressure spring
only. Racing Applications Only.
10990
High volume performance upgrade for the M-99HV-S. Increase in volume of 25% over stock oil pump.
The 10990 is a Big Block style oil pump made to fit the Small Block applications. The drive and idler
shafts have been extended to allow for additional support in the cover. Additional support eliminates dynamic
shaft deflection at increased RPM levels. The cover is doweled to the pump housing to assure alignment of
the shaft bores. The relief valve has a screw-in plug instead of a pin. The housing and cover are CNC
machined and phosphate coated. An additional spring, the original stock replacement is supplied which will
reduce bypass pressure if needed. Includes intermediate shaft with steel guide. Uses 3/4” press in screen.
High volume performance upgrade for the M-99HV-S. Increase in volume of 25% over stock oil pump.
The same as the 10990 except with the addition of grooves machined in the housing and cover. The grooves
reduce cavitation effects in high RPM applications. Using this oil pump will reduce pressure at idle. Includes
intermediate shaft with steel guide. Uses 3/4” press in screen. Racing applications only.
NEWEST BILLET ALUMINUM
OIL PUMP TECHNOLOGY
NEW
ITEM!
GM S.B. ALUMINUM BILLET OIL PUMP LINE
10050-750SS
Aluminum billet high volume oil pump for street & strip applications with 7-1/2” deep pans. 25%
increase in volume over stock oil pump. Pump features a lightweight billet 6061-T6 aluminum housing &
cover with a protective anodized hardcoat. The high volume gears are also coated. The drive shaft is
manufactured from chrome-moly steel. Pump shafts have been extended into the cover for support. The pickup
screen has been integrated into the pump body and features a stainless steel wire mesh. This pump has multiple
pressure settings and is CNC manufactured to exacting tolerances and surface finishes. The supercharged
inlet allows for improved performance at high RPM’s. Includes 12550 chrome moly intermediate shaft, stud
kit and +10# and -10# relief springs.
6
10050-825SS
Aluminum billet high volume oil pump for street & strip applications with 8-1/4” deep pans. 25%
screen has been integrated into the pump body and features a stainless steel wire mesh. This pump has multiple
pressure settings and is CNC manufactured to exacting tolerances and surface finishes. The supercharged
inlet allows for improved performance at high RPM’s. Includes 12550 chrome moly intermediate shaft, stud kit
and +10# and -10# relief springs.
2007 GM AWARD WINNER - BEST NEW PERFORMANCE PRODUCT
10050-700CT
Aluminum billet high volume oil pump for circle track racing applications with 7” deep pans. 25%
screen has been integrated into the pump body, offset for circle track racing and features a stainless steel wire
mesh. This pump has multiple pressure settings and is CNC manufactured to exacting tolerances and surface
finishes. The supercharged inlet allows for improved performance at high RPM’s. Includes 12550 chrome moly
intermediate shaft, stud kit and +10# and -10# relief springs.
NEW
ITEM!
GM OLDSMOBILE PERFORMANCE OIL PUMP
M-22FHV
High volume upgrade of the M-22F oil pump. 20% increase in volume over stock oil pump. The
M-22FHV is manufactured with both a 3/4” bolt on type flange and a 5/8” chamfered hole allowing for the
use of both bolt on or press in type screen. For use with Oldsmobile 260, 307, 350, 400, 403, 425 & 455
engines.
PONTIAC V8 PERFORMANCE OIL PUMPS
10540
High pressure performance upgrade for the M-54D-S. The housing is CNC machined and phosphate
coated. Includes 3/4” diameter oil pickup screen.
10541
High pressure performance upgrade for the M-54F. 30% increase in pressure over the 10540 oil
pump. The housing is CNC machined and phosphate coated. Includes 3/4” diameter oil pickup screen.
7
GM GEN III & IV 4.8L-5.3L-5.7L-6.0L • LS3 6.2L
10295
High pressure performance upgrade for M295. Stock volume, 10% increase in pressure over M295
oil pump. The cast aluminum housing is CNC machined and hardcoat anodized. The cast iron cover is
CNC machined and phosphate coated. The relief valve features a screw in valve plug with the optional
lower stock pressure spring supplied. Uses stock 1-1/4” bolt on screen.
10296
High volume performance upgrade for M295. 18% increase in volume over M295 and 10295 oil
pump. The cast aluminum housing is CNC machined and hardcoat anodized. The cast iron cover is
CNC machined and phosphate coated. The relief valve features a screw in valve plug with the optional
lower stock spring supplied. Uses stock 1-1/4” bolt on screen.
GM GEN GEN IV, LS4 5.3L & L92 VORTEC 6.2L
PERFORMANCE OIL PUMP
NEW
ITEM!
10355
High volume performance upgrade for M355. Standard volume for LS4 5.3L & L92 6.2L engines. 33%
increase in volume over the 10295. The 10355 features a hard coat anodized body with a cast iron
phosphate coated cover. The relief valve features a screw in valve plug with the optional lower stock
pressure spring supplied. Uses a stock 1-1/8” bolt on screen.
GM B.B. PERFORMANCE OIL PUMP LINE
10770
High volume performance upgrade for M-77HV. 25% increase in volume over stock pump. The
housing and cover are CNC machined and phosphate coated. The lower pressure spring is included to
reduce pressure if desired. Includes intermediate shaft with steel guide. Uses 3/4” press in screen.
10774
Standard volume performance upgrade for M-77. The housing and cover are CNC machined and
phosphate coated. The lower pressure spring is included to reduce pressure if desired. Includes
intermediate shaft with steel guide.Uses 3/4” press in screen.
10775
High pressure performance upgrade for M-77. Standard volume/high pressure oil pump. The housing
and cover are CNC machined and phosphate coated. The drive and idler shafts have been extended to allow
for additional support in the cover. Manufactured with pink spring installed for higher pressure. To change
pump to lower pressure (M-77) use supplied plain spring. Includes intermediate shaft with steel guide.
Uses 3/4” press in screen.
10778
High volume performance upgrade for the 10770. Increase in volume of 25% over stock oil pump.
The drive shaft has been manufactured from chrome-moly steel. The drive and idler shafts have been extended
to allow for additional support in the cover. Additional support eliminates dynamic shaft deflection at increased
RPM levels. The cover is doweled to the pump housing to assure alignment of the shaft bores. The relief valve
has a screw-in plug instead of a pin. The housing and cover are CNC machined and phosphate coated. An
additional spring, the original stock replacement is supplied which will reduce bypass pressure if needed.
Includes intermediate shaft with steel guide. Uses 3/4” press in screen.
8
High volume performance upgrade for the 10770. Increase in volume of 25% over stock oil pump.
The same as the 10778 except with the addition of grooves machined in the housing and cover. The grooves
reduce cavitation effects in high RPM applications. Using this oil pump will reduce pressure at idle. Includes
intermediate shaft with steel guide.Uses 3/4” press in screen. Racing applications only.
GM B.B. ALUMINUM BILLET OIL PUMP LINE
10070-800SS
Aluminum billet high volume oil pump for street & strip applications with 8” deep pans. 25%
increase in volume over stock oil pump. Pump features a lightweight billet 6061-T6 aluminum housing
& cover with a protective anodized hardcoat. The high volume gears are also coated. The chrome-moly
drive shaft has been extended. Pump shafts have been extended into the cover for support.The pickup
screen has been integrated into the pump body and features a stainless steel wire mesh. This pump has
multiple pressure settings and is CNC manufactured to exacting tolerances and surface finishes. The
supercharged inlet allows for improved performance at high RPM’s. Includes 12770 chrome moly
intermediate shaft and stud kit and +10# and - 10# relief springs.
10070-900SS
Aluminum billet high volume oil pump for street & strip applications with 9” deep pans. 25%
increase in volume over stock oil pump. Pump features a lightweight billet 6061-T6 aluminum housing
& cover with a protective anodized hardcoat. The high volume gears are also coated. The chrome-moly
drive shaft has been extended. Pump shafts have been extended into the cover for support. The pickup
screen has been integrated into the pump body and features a stainless steel wire mesh. This pump has
multiple pressure settings and is CNC manufactured to exacting tolerances and surface finishes. The
supercharged inlet allows for improved performance at high RPM’s. Includes 12550 chrome moly
intermediate shaft, stud kit and +10# and - 10# relief springs.
NEW
ITEM!
CHRYSLER PERFORMANCE OIL PUMP LINE
M-63HV
High volume upgrade of the M-63. 25% increased volume over stock pump. Larger volume body
and gerotor set provide higher volume than the original stock oil pump.
M-63HP
High pressure, standard volume upgrade of the M-63. Increased oil pressure. Provides higher oil
pressure than the stock oil pump.
M-72HV
High volume upgrade of the M-72. 25% increased volume over stock pump. Larger volume body
and gerotor set provide higher volume than the original stock oil pump.
9
10190
High volume performance upgrade of the M190. 20% increased volume over stock pump.
The pump is supplied with a gerotor designed to provide 20% increased oil volume than the original
Chrysler design. The pump design has been improved by separating the inlet oil from the by-passed
oil. In addition pump materials have been changed to improve performance and durability.
10342
Standard volume performance upgrade of the M342. The 10342 features a hardcoat anodized body
with a cast iron phosphate coated cover for improved pump performance and durability. Adjustable
by-pass pressure using optional springs. The cup plugs have been replaced with threaded fittings. Uses
1-1/8” bolt on screen.
NEW
ITEM!
FORD S.B. PERFORMANCE OIL PUMP LINE
M-68HV
High volume upgrade for M-68. 25% increased volume over stock pump. Larger volume body
and gerotor provide higher volume than the original stock oil pump. Uses 5/8” bolt on screen.
10687
Stock volume performance upgrade for M-68. Gerotor set assembled to an extended drive shaft that
allows for additional support in the cover. Supporting the drive shaft in both the housing and cover
eliminates dynamic shaft deflection at increased RPM levels. The cover is doweled to the pump housing
to assure alignment of shaft bores. The housing and cover are CNC machined and phosphate coated for
wear and rust prevention. The relief valve has a pressure adjustable screw-in plug instead of a cup plug.
Works with the original bolt-on pickup screen assemblies. Uses 5/8” bolt on screen.
10688
High volume performance upgrade for M-68-HV. The same features as the 10687 but the gerotor displaces
25% more volume of oil than the 10687. Uses 5/8” bolt on screen.
FORD B.B. PERFORMANCE OIL PUMP LINE
M-57HV
High Volume upgrade for M-57. 25% increased volume over stock pump. Larger volume body
M-57HP
High pressure upgrade for M-57. Provides higher pressure than the original stock oil pump. Uses 5/8”
bolt on screen. NOTE: for use in blocks with by-pass spring in the block.
10
M-83HV
High volume upgrade for M-83. 25% increased volume over stock pump. Larger volume body
M-84AHV
High volume upgrade for M-84A. 25% increased volume over stock pump. Larger volume body
and gerotor provide higher volume than the original stock oil pump. Uses 5/8” threaded screen.
10832
Stock volume performance upgrade for M-83. Gerotor set assembled to an extended drive shaft that
allows for additional support in the cover. Supporting the drive shaft in both the housing and cover
eliminates dynamic shaft deflection at increased RPM levels. The cover is doweled to the pump housing
to assure alignment of shaft bores. The housing and cover are CNC machined and phosphate coated for
wear and rust prevention. The relief valve has a pressure adjustable screw-in plug instead of a cup plug.
Works with the original 5/8” bolt-on pickup screen assemblies.
10833
High volume performance upgrade for M-83. The same features as the 10832 but the gerotor displaces
25% more volume of oil than the 10832. Uses 5/8” bolt on screen.
FORD 4.6L BILLET PERFORMANCE OIL PUMPS
10176
Stock volume performance upgrade for the M176. For use with the 4.6-X SOHC Mustang GT.
Supplied with chrome-moly Billet Steel Rotors. The 10176 also features an anodized hard coated body
and a phosphate coated cover. Uses 13/16” diameter pickup screen.
10227
Standard volume performance upgrade for the M227. For use with the 4.6L DOHC Cobra Mustang.
Also may be used in the 4.6L, vin X SOHC Mustang as a 8% High volume oil pump. Supplied with
chrome-moly Billet Steel Rotors. The 10227 also features an anodized hard coated body and a phosphate
coated cover. Uses 15/16” diameter 335S oil pickup screen.
11
PERFORMANCE TIMING GUIDE
GEAR DRIVE / 3 PC BILLET STEEL SPEED SETS
•All gears are 8620 carburized steel
•Includes roller cam button, lock plate, and bolts
•Timing adjusted with optional 5 color coded dowel pin
hole inserts
•Available in noisy and quiet versions
RECOMMENDED FOR STREET N STRIP, CLAIMER &
RACING APPLICATIONS UP TO 6,500 RPM.
GEAR DRIVE SPEED SETS
Part No.
48400
48400Q
48410
48410Q
48420
48430
48450
Applications
Chevrolet S.B.
Chevrolet S.B.
Chevrolet S.B.
Chevrolet S.B.
Ford S.B.
Ford S.B.
Chevrolet S.B.
Features
With Thrust Bearing (NOISY)
With Thrust Bearing (QUIET)
With Thrust Bearing (QUIET)
Check the application section for detailed year range information and required set number.
•Large .250 diameter seamless double roller chain
•Billet steel cam sprocket
•3 keyway crank sprocket w/+4°/-4° cam adjustment
•Press fit roller thrust bearing and bronze washer options
•9 keyway steel crank sprocket options, heat treated w/black oxide coating
RECOMMENDED FOR STREET N STRIP, CIRCLE TRACK, CLAIMER &
HOT ROD APPLICATIONS
3 PC BILLET STEEL SPEED SETS
Part No.
Applications
Features
48500T-9
Chevrolet S.B.
Press Fit Thrust Bearing
48500W-9
Chevrolet S.B.
Bronze Washer
48501T-9
Chevrolet S.B.
48501W-9
Chevrolet S.B.
Bronze Washer
48520T-9
Ford S.B.
48520W-9
Ford S.B.
Bronze Washer
48530T-9
Ford S.B.
48551T-9
Ford S.B.
Check the application section for detailed year range information and required set number.
12
Specialty Items & Tools
Melling Engine Priming Tools
Melling Engine Priming Tools are manufactured from the highest quality materials available. These tools will
prevent galling problems by circulating oil through critical areas of a new engine before engine start-up.
PT10
PT11
PT12
PT13
Small Block & Big Block Chrysler
Fords with a 1/4” hex shaft
Fords with a 5/16” hex shaft
Small Block & Big Block Chevrolet
Melling Screen Installation Tools
Melling Engine Parts supplies (2) tools for installing press-in type oil pump screen
assemblies. The pumpbody should be placed on a small block of wood with the tool
straight up and down. Start the screen straight into the hole by twisting and turning by
hand before pounding. UNDER NO CIRCUMSTANCES SHOULD THE SCREEN OR
OIL PUMP BE HELD IN A VICE. This will lock up the pump by crushing the gear
pocket. The tool can be tapped with a hammer until the rolled bead on the collar of
the screen tube is flush with the oil pump. This is a metal displacement press fit that
only works once.
MCAT-62
For 5/8” diameter tubes
MCAT-75
For 3/4” diameter tubes
MELL-LUBE Engine Assembly Lube
NEW IMPROVED PROTECTION
1,400 PPM ZINC
MELL-LUBE engine assembly lube contains a special
additive that plates wear surfaces to prevent scoring or
galling during engine start-up.
MELL-LUBE also contains corrosion inhibitors to prevent
rust and pitting to new engines.
NOTE: Not for use on cylinder walls or piston rings
M-10012
M-10012G
4 oz. container
1 Gallon container
13
PERFORMANCE - AMERICAN MOTORS & JEEP
Engine
Year
Line
8 Cyl.
Engine
Year
Line
Engine
8 Cyl. (Continued)
Year
Line
8 Cyl. (Continued)
4.8 (290)
1967-69
1
5.6 (343)
1967-69
3
6.4 (390)
1968-70
5
5.0 (304) OHV
1970-79
2
5.9 (360) OHV
1970-78
4
6.6 (401) OHV
1971-76
6
Line
No.
1
2
Part Title
Part No
Torque Camshaft
MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
20402
299984
290114
466434
473004
475144
Torque Camshaft
MTA-1
Torque Cam Lifter Kit
CL-MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
20402
299984
290114
VS-280
466434
473004
475144
500314
501004
4
USE WITH [20205] CAM - MACHINING MAY BE REQUIRED
2 GROOVES
CHROME MOLY - USE WITH [466434] SPRINGS
CLASS I - NOT COMPUTER COMPATIBLE. CAM LIFT .280 INT
.295 EXH
1971-1977 KIT INCLUDES 1-[MTA-1] CAM, 16-[JB-2011] LIFTERS &
4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING
W/INSTALLED HGT. OF 1.82 CLASS I NOT COMPUTER
COMPATIBLE
CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT .325 INT
.339 EXH
USE WITH CAST IRON CAMSHAFT
1971-1977 USE WITH [MTA-1] CAM
2 GROOVES
MAX. SPRING PRESSURE 350 LBS. 5/16 DIA. STANDARD
LENGTH- HEAT TREATED FOR GUIDE PLATES. HEAT TREATED
FOR GUIDE PLATES. 5/16" STANDARD LENGTH.
5/16 DIA. STANDARD LENGTH - HEAT TREATED FOR
GUIDEPLATES (ONE PIECE CONSTRUCTION) MAX. SPRING
PRESSURE 500 LBS. HEAT TREATED FOR GUIDE PLATES. 5/16"
STANDARD LENGTH. ONE PIECE CONSTRUCTION.
5.6 (343) ENG - 1967-69 - V8 - 4.080 Bore
Torque Camshaft
MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
20402
299984
290114
466434
473004
475144
CLASS I NOT COMPUTER COMPATIBLE. CAM LIFT .280 INT .295
EXH
.339 EXH
2 GROOVES
5.9 (360) OHV ENG - 1970-78 - V8 - 4.080 Bore
Torque Camshaft
Continued on Next Page
14
.295 EXH
.339 EXH
MUST USE WITH CAST IRON CAMSHAFT
5.0 (304) OHV ENG - 1970-79 - V8 - 3.750 Bore
Valve Locks
Retainers
Chrome Moly Push Rods
3
Description
4.8 (290) ENG - 1967-69 - V8 - 3.750 Bore (AMBASSADOR, AMX)
MTA-1
EXH
PERFORMANCE - AMERICAN MOTORS & JEEP (Continued)
Line
No.
4
Part Title
Part No
CL-MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
20402
Valve Locks
Retainers
299984
290114
VS-280
466434
473004
475144
500314
501004
5
1971-1977 KIT INCLUDES 1-[MTA-1] CAM, 16-[JB-2011] LIFTERS &
COMPATIBLE
.339 EXH
1971-1977 USE WITH [MTA-1] CAM
2 GROOVES
FOR GUIDE PLATES. 5/16" STANDARD LENGTH
PRESSURE 500 LBS. HEAT TREATED FOR GUIDE PLATES. ONE
PIECE CONSTRUCTION. 5/16" STANDARD LENGTH
6.4 (390) ENG - 1968-70 - V8 - 4.165 Bore
Torque Camshaft
MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
20402
299984
290114
466434
473004
475144
500314
501004
6
Description
5.9 (360) OHV ENG - 1970-78 - V8 - 4.080 Bore (Continued)
EXH
.339 EXH
2 GROOVES
1970 MAX. SPRING PRESSURE 350 LBS. 5/16 DIA. STANDARD
1970 5/16 DIA. STANDARD LENGTH - HEAT TREATED FOR
PRESSURE 500 LBS. HEAT TREATED FOR GUIDE PLATES. 5/16".
ONE PIECE CONSTRUCTION. STANDARD LENGTH
6.6 (401) OHV ENG - 1971-76 - V8 - 4.170 Bore
Torque Camshaft
MTA-1
CL-MTA-1
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
20402
Valve Locks
299984
290114
VS-280
466434
473004
EXH
KIT INCLUDES 1-[MTA-1] CAM, 16-[JB-2011] LIFTERS & 4OZ
MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING
W/INSTALLED HGT. OF 1.82. CLASS I NOT COMPUTER
COMPATIBLE
.339 EXH
USE WITH [MTA-1] CAM
2 GROOVES
15
PERFORMANCE - AMERICAN MOTORS & JEEP (Continued)
Line
No.
6
Part Title
Part No
Description
Retainers
PRESSURE 500 LBS. HEAT TREATED FOR GUIDE PLATES. ONE
PIECE CONSTRUCTION. 5/16" STANDARD LENGTH
475144
500314
501004
PERFORMANCE - BUICK
Engine
Year
Line
V6
Engine
1982-85
1
4.1-4 (252) OHV
3.8 (231) OHV
1977-87
2
8 Cyl.
4.4-J (267)
1
Part Title
1980-84
1981-82
Part No
MTB-1
MTB-2
CL-MTB-1
CL-MTB-2
Mell Lube
Hydraulic Lifters
M-10012
299694
299704
Valve Spring with
Hydraulic Lifters
Valve Locks
VS-380
3pc Set
40404
Year
Line
3
4
5.0-G,H,U (305)
1977-87
5
5.7-L (350)
1977-79
6
350 B,H,J,X
1972-81
7
Description
476104
500574
CLASS I NOT COMPUTER COMPATIBLE (MAXIMUM TORQUE
INCREASE). CAM LIFT .280 INT .295 EXH
CLASS I NOT COMPUTER COMPATIBLE (MINIMUM TORQUE
KIT INCLUDES 1-[MTB-1] CAM, 12-[JB-969] LIFTERS & 4OZ MELL
LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING
W/INSTALLED HGT. OF 1.72 CLASS I (MAXIMUM TORQUE
INCREASE)
W/INSTALLED HGT. OF 1.72 CLASS I (MINIMUM TORQUE
INCREASE)
MUST BE USED WITH ADJUSTABLE VALVE TRAIN - ANTI PUMP
UP - SET AT ZERO LASH
USE WITH [MTB-1] & [MTB-2] CAMS
MAX. SPRING PRESSURE 350 LBS. HEAT TREATED FOR GUIDE
PLATES
1982-1984 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST
IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
NOTE: DO NOT USE DAMPER
3.8 (231) OHV ENG - 1977-87 - V6 - 3.78, 3.80 Bore (231-A ENG 1977-87, 231-G ENG 1978, 231-2
ENG 1978-79, 231-3 ENG 1978-87, 231-8 1983, 231-9 ENG 1984-85)
Torque Camshaft
MTB-1
MTB-2
16
Engine
3.0-E (181) ENG - 1982-85 - V6 - 3.800 Bore
Torque Camshaft
2
Line
8 Cyl. (Continued)
3.0-E (181)
Line
No.
Year
6 Cyl.
CL-MTB-1
INCREASE)
PERFORMANCE - BUICK (Continued)
Line
No.
2
3
Part Title
Part No
CL-MTB-2
Camshafts Using
Hydraulic Lifters
Mell Lube
Hydraulic Lifters
21300
M-10012
299694
299704
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
VS-380
3pc Set
40404
476104
475184
500574
W/INSTALLED HGT. OF 1.72 CLASS I (MINIMUM TORQUE
INCREASE)
.339 EXH
CHROME MOLY- USE WITH STOCK SPRINGS
MAX. SPRING PRESSURE 350 LBS. MAXIMUM SPRING
PRESSURE 350 LBS. HEAT TREATED FOR GUIDE PLATES
INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET NOTE: DO
NOT USE DAMPER WITH THIS SET
4.1-4 (252) OHV ENG - 1980-84 - V6 - 3.97 Bore
Torque Camshaft
MTB-1
MTB-2
CL-MTB-1
CL-MTB-2
Mell Lube
Hydraulic Lifters
4
Description
3.8 (231) OHV ENG - 1977-87 - V6 - 3.78, 3.80 Bore (231-A ENG 1977-87, 231-G ENG 1978, 231-2
ENG 1978-79, 231-3 ENG 1978-87, 231-8 1983, 231-9 ENG 1984-85) (Continued)
M-10012
299694
299704
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
VS-380
3pc Set
40404
476104
475184
500574
INCREASE)
W/INSTALLED HGT. OF 1.72 CLASS I (MINUMUM TORQUE
INCREASE)
CHROME-MOLY USE WITH STOCK SPRINGS
MAX. SPRING PRESSURE 350 LBS. MAXIMUM SPRING
PRESSURE 350 LBS. HEAT TREATED FOR GUIDE PLATES
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET NOTE: DO
NOT USE A DAMPER WITH THIS SET
4.4-J (267) ENG - 1981-82 - V8 - 3.50 Bore
Mell Lube
Gear Drive Set
M-10012
48400
NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER
CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED
WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS.
RECOMMENDED FOR STREET AND STRIP, CLAIMER AND
RACING ENGINES UP TO 6,500 RPM.
17
Line
No.
4
Part Title
Part No
Gear Drive Set
48400Q
3pc Set
48500T-9
48500W-9
5
M-10012
48400
48400Q
3pc Set
48500T-9
48500W-9
QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER
INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER),
BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET
WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST
BEARINGS. RECOMMENDED FOR STREET AND STRIP, CIRCLE
TRACK, HOT ROD AND CLAIMER ENGINES
WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER
RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT
ROD AND CLAIMER ENGINES.
5.7-L (350) ENG - 1977-79 - V8 - 4.000 Bore
Mell Lube
Gear Drive Set
M-10012
48400
48400Q
18
5.0-G,H,U (305) ENG - 1977-87 - V8 - 3.736 Bore
Mell Lube
Gear Drive Set
6
Description
4.4-J (267) ENG - 1981-82 - V8 - 3.50 Bore (Continued)
Line
No.
6
Part Title
Part No
Description
5.7-L (350) ENG - 1977-79 - V8 - 4.000 Bore (Continued)
3pc Set
48500T-9
48500W-9
7
350 B,H,J,X ENG - 1972-81 - 8 Cyl. - 3.800 Bore
Mell Lube
3pc Set
M-10012
40210
INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET &
MULTIPLE KEYWAY CRANK SPROCKET
PERFORMANCE - CHEVROLET CARS & TRUCKS
Engine
Year
Line
6 Cyl.
Engine
Year
Line
8 Cyl. (Continued)
Engine
Year
Line
8 Cyl. (Continued)
173
1980-89
1
283
1957-67
9
6.0 (364)
1999-07
19
189
1990-94
2
293
1999-07
10
6.2-8 (378) OHV
2007
20
200
1978-79
3
302
1967-69
11
400 SMALL BLOCK
1970-80
21
229
1980-84
4
305
1976-93
12
396
1965-70
22
307
1968-73
13
400 BIG BLOCK
1970-73
23
1985-03
5
325
1999-07
14
402
1971-72
24
2007
15
454
1966-69
25
262
1975-76
6
327
1962-69
16
427
1980-90
26
265
1955-57
7
350
1967-02
17
454
1970-76
27
267
1979-82
8
350
1997-04
18
454
1970-97
28
V6
262 4.3
8 Cyl.
Line
No.
1
2
3
Part Title
Part No
Description
173 ENG - 1980-89 - V6 - 89 MM Bore
Oil Pump
Torque Camshaft
M134HV
MTC-5
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
290954
VS-380
HI VOL PUMP (20% ADD'L VOL OF OIL) 3/4 INCH OUTLET
EXH
FOR USE WITH [MTC-5] CAM
189 ENG - 1990-94 - V6 - 3.504 Bore
Oil Pump
Torque Camshaft
M134HV
MTC-5
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
290954
VS-380
HI VOL PUMP (20% ADD'L VOL OF OIL) 3/4" OUTLET
CLASS 1 NOT COMPUTER COMPATIBLE. CAM LIFT .280 INT .295
EXH EXCLUDES VIN D, M.
EXCLUDES VIN D, M
EXCLUDES VIN D,M
200 ENG - 1978-79 - V6 - 3.50 Bore INCLUDES TRUCKS
Mell Lube
Gear Drive Set
M-10012
48400
19
PERFORMANCE - CHEVROLET CARS & TRUCKS (Continued)
Line
No.
3
Part Title
Part No
Gear Drive Set
48400Q
3pc Set
48500T-9
48500W-9
4
M-10012
48400
48400Q
3pc Set
48500T-9
48500W-9
TRACK, HOT ROD AND CLAIMER ENGINES.
262 ENG - 1985-03 - V6 - 4.0 Bore
Oil Pump
M-99HV-S
10550
10551
Camshafts Using
Hydraulic Lifters
Camshaft Lifter Kits Using
Hydraulic Lifters
Camshafts Using
Hydraulic Roller Lifters
Mechanical Lifters
20
229 ENG - 1980-1984 - V6 - 3.736 Bore INCLUDES TRUCKS
Mell Lube
Gear Drive Set
5
Description
200 ENG - 1978-79 - V6 - 3.50 Bore INCLUDES TRUCKS (Continued)
22113
32113
22128
298404
HI VOL PUMP- MORE VOL AND PRESSURE THAN STOCK PUMP.
INCLUDES SCREEN, MAY REQUIRE CUTTING PAN BAFFLES.
MAY REQUIRE CUTTING PAN BAFFLES.
HI VOL PUMP (25% ADD'L VOL OF OIL) - FEATURES: INCLUDES
I/S SHAFT W/STEEL GUIDE. EXC CHEV II
I/S SHAFT W/STEEL GUIDE. EXC CHEV II- 19MM INLET
CLASS I NOT COMPUTER COMPATIBLE EXC ROLLER LIFTERS.
CAM LIFT .265 INT .288 EXH
KIT INCLUDES 1-[22113] CAM, 12-[29817] LIFTERS & 4OZ MELL
LUBE CLASS I NOT COMPUTER COMPATIBLE
1987-1994 CLASS I NOT COMPUTER COMPATIBLE. CAM LIFT
.319 INT .325 EXH
CHILLED IRON ONLY USE W/STEEL OR HARDFACED
CAMSHAFTS-MELLING DOES NOT SUPPLY
Line
No.
5
Part Title
Part No
Description
262 ENG - 1985-03 - V6 - 4.0 Bore (Continued)
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
JB-2079
298174
298184
466354
476104
475184
500314
500614
500674
501004
501014
501024
501034
Gear Drive Set
48400
48400Q
48450
3pc Set
40201
40400
40520
HYD. ROLLER
USE WITH (22113) CAMSHAFT, MACHINING MAY BE REQUIRED
CHROME MOLY- USE WITH [46635] SPRINGS
LENGTH- HEAT TREATED FOR GUIDE PLATES. EXC. ROLLER
CAM.
5/16 DIA. + .100 O/S LENGTH-HEAT TREATED FOR GUIDE
PLATES MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER CAM.
MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER CAM.
PRESSURE 500 LBS. EXC. ROLLER CAM.
5/16 DIA. + .100 O/S LENGTH - HEAT TREATED FOR GUIDE
PLATES (ONE PIECE CONSTRUCTION) EXC. ROLLER CAM.
PLATES. (ONE PIECE CONSTRUCTION) EXC. ROLLER CAM.
PLATES. (ONE PIECE CONSTRUCTION) EXC. ROLLER CAM.
1985-1986 NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS,
ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. ADJUSTED
W/5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS.
RACING ENGINES UP TO 6,500 RPM. INCLUDES TRUCKS VIN
CODES N,Z.
1985-1986 QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS,
ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. ADJUSTED
W/5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS.
CODES N,Z
1987-1993 INCLUDES 8620 CARBURIZED STEEL GEARS,
ROLLER CAMBUTTON, LOCK PLATE AND BOLTS, ADJUSTED
W/5 COLOR CODED DOWEL PIN HOLE INSERTS.
CODES B,Z
1985 INCLUDES DOUBLE ROLLER CHAIN, CAST IRON CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET EXC
STOCK ROLLER CAM ENGS. INCLUDES TRUCKS
INCLUDES DOUBLE SEAMLESS SOLID ROLLER CHAIN, CAST
EXC STOCK ROLLER CAM ENGS. INCLUDES TRUCKS
INCLUDES 3/8" HY-VO TEC CHAIN, CAM SPROCKET WITH
LIGHTENING HOLES & 9-MULTIPLE KEYWAY CRANK SPROCKET
EXC. ROLLER CAM - INCLUDES TRUCKS RACING
APPLICATIONS ONLY
21
Line
No.
5
Part Title
Part No
3pc Set
48500T-9
48500T-9
48500W-9
48500W-9
6
1985-1986 INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250"
ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK
SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT
ROLLER THRUST BEARINGS. RECOMMENDED FOR STREET
AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES.
TRUCKS ONLY VIN CODES N,Z
CARS ONLY VIN CODE Z
SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER
ROD AND CLAIMER ENGINES. TRUCKS ONLY VIN CODES N,Z
ROD AND CLAIMER ENGINES. CARS ONLY VIN CODE Z
262 ENG - 1975-76 - 8 Cyl. - 3.671 Bore (EL CAMINO, CABALLERO)
Oil Pump
M-99HV-S
10550
10551
10552
10552C
10553
10554
10555
10555C
22
Description
262 ENG - 1985-03 - V6 - 4.0 Bore (Continued)
I/S SHAFT W/STEEL GUIDE. EXC CHEVY II
I/S SHAFT W/STEEL GUIDE. EXC CHEVY II - 19MM INLET
HI VOL PUMP (10% ADD'L VOL OF OIL) - FEATURES: SHAFTS
EXTENDED INTO COVER FOR SUPPORT. RELIEF VALVE
SPRING HAS SCREW IN PLUG. I/S SHAFT WITH STEEL GUIDE.
EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED WITH
THIS PUMP.
HI VOL PUMP (10% ADD'L VOL OF OIL) FEATURES: SHAFTS
EXTENDED INTO COVER FOR SUPPORT. REFIEF VALVE
SPRING HAS SCREW IN PLUG. I/S SHAFT W/STEEL GUIDE. HAS
ANTI-CAVITATION GROOVES. EITHER A BOLT ON OR PRESS IN
SCREEN CAN BE USED WITH THIS PUMP. RACING
APPLICATIONS ONLY
STANDARD VOLUME VERSION OF THE 10550 PUMP.
SPRING HAS SCREW IN PLUG. I/S SHAFT W/STEEL GUIDE.
THIS PUMP.
HAS ANTI-CAVITATION GROOVES. EITHER A BOLT ON OR
PRESS IN SCREEN CAN BE USED WITH THIS PUMP. RACING
APPLICATIONS ONLY
Line
No.
6
Part Title
Part No
Description
262 ENG - 1975-76 - 8 Cyl. - 3.671 Bore (EL CAMINO, CABALLERO) (Continued)
Oil Pump
10990
10990C
10050-700CT
10050-750SS
10050-825SS
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
HI VOLUME PUMP (25% ADD'L VOLUME) FEATURES: SHAFTS
EXTENDED INTO COVER FOR SUPPORT. RELIEF VALVE HAS
SCREW IN PLUG. I/S SHAFT W/STEEL GUIDE. INCLUDES STOCK
SPRING.
SCREW IN PLUG. I/S SHAFT WITH STEEL GUIDE. HAS ANTICAVITATION GROOVES. RACING APPLICATIONS ONLY
HI VOL ALUMINUM BILLET (25% ADD'L VOL) - PROTECTIVE
ANODIZED HARDCOAT. SCREEN OFFSET FOR CIRCLE TRACK
APPLICATIONS INTEGRATED INTO PUMP COVER. INCLUDES
STUD MOUNTING KIT, CHROME-MOLY I/S SHAFT & OPTIONAL
RELIEF SPRINGS. FOR 7" PANS. RACING ONLY.
ANODIZED HARDCOAT. SCREEN INTEGRATED INTO PUMP
COVER. INCLUDES STUD MOUNTING KIT, CHROME-MOLY I/S
SHAFT & OPTIONAL RELIEF SPRINGS. FOR 7½" PANS. STREET
& STRIP APPLICATIONS.
SHAFT & OPTIONAL RELIEF SPRINGS. FOR 8¼" PANS. STREET
AND STRIP.
BOLT ON SCREEN. USE W/7" DEEP STOCK TYPE PAN. NOTE:
CLEARANCE BETWEEN THE BOLTS AND HOLES ALLOWS 3/16
TO 1/4" ADJUSTMENT UP OR DOWN TO CUSTOM FIT YOUR
APPLICATION. BOLT ON SCREEN FOR 10555 PUMP.
BOLT ON SCREEN. USE WITH 7 1/2" DEEP STOCK TYPE PAN.
NOTE: CLEARANCE BETWEEN THE BOLTS AND HOLES ALLOWS
3/16 TO 1/4" ADJUSTMENT UP OR DOWN TO CUSTOM FIT YOUR
APPLICATION.
BOLT ON SCREEN. USE WITH 8" DEEP STOCK TYPE PAN.
APPLICATION.
BOLT ON SCREEN. USE WITH 7" DEEP OVAL TRACK PAN.
NOTE: MESH IS TO THE RIGHT. NOTE: CLEARANCE BETWEEN
THE BOLTS AND THE HOLES ALLOWS 3/16" TO 1/4"
ADJUSTMENT UP OR DOWN TO CUSTOM FIT YOUR
APPLICATION.
BOLT ON SCREEN. USE WITH 7 1/2" DEEP OVAL TRACK PAN.
APPLICATION.
CLASS I NOT COMPUTER COMPATIBLE. NOTE: (50 STATES
LEGAL) IN CALIFORNIA USE ONLY IN 1987 & OLDER S.B. CHEVY
ENG. EQUIPPED WITH CARBURETTED 267-350 V8. CAM LIFT
.280 INT .295 EXH
KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL
W/INSTALLED HGT. OF 1.72 CLASS I USE IN 1987 AND OLDER
SMALL BLOCK CHEVY ENGINE EQUIPPED WITH CARBURETTED
267-350 CID V8. NOT COMPUTER COMPATIBLE
23
Line
No.
6
Part Title
Part No
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
Camshafts Using
Hydraulic Lifters
22450
22470
C-400-P
22200
22210
22230
22232
22233
22234
22301
22303
22305
22320
22401
22460
Hydraulic Lifters
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
24
Description
22398
M-10012
JB-992
298404
JB-2079
298174
CLASS IV OEM #3927140 NOT COMPUTER COMPATIBLE. CAM
LIFT .329 INT .341 EXH
CLASS IV NOT COMPUTER COMPATIBLE. CAM LIFT .347 INT
.347 EXH
.372 EXH.
.323 EXH
CLASS IV OEM #3965754. CAM LIFT .341 INT .357 EXH
CLASS IV NOT COMPUTER COMPATIBLE. CAM LIFT NOT LISTED
NOT COMPUTER COMPATIBLE. CAM LIFT NOT LISTED
CLASS II NOT COMPUTER COMPATIBLE. OEM #3863151. CAM
CLASS II NOT COMPUTER COMPATIBLE. OEM #3896962. CAM
CLASS II NOT COMPUTER COMPATIBLE CAM LIFT .296 INT .296
EXH.
CLASS II NOT COMPUTER COMPATIBLE. CAM LIFT .312 INT .320
EXH
EXH
EXH
.320 EXH
.325 EXH
.339 EXH
.302 EXH
.355 EXH
.339 EXH
LUBE CLASS I NOTE: (50 STATES LEGAL) IN CALIFORNIA USE
ONLY IN 1987 & OLDER S.B. CHEVY ENG. EQUIPPED WITH
CARBURETTED 267-350 CID V8. NOT COMPUTER COMPATIBLE.
LUBE CLASS II NOT COMPUTER COMPATIBLE
CLASS III NOT COMPUTER COMPATIBLE. RETRO-FIT ROLLER
CAM. CAM LIFT .537 INT .514 EXH
SPECIAL DESIGNED METERING SYSTEM
HYD. ROLLER
Line
No.
6
Part Title
Part No
Description
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
HEAD DIA. 1.940 INT.
HEAD DIA. 1.500 EXH.
OUTER- USE WITH [22410], [22415], [22400] & [22450] CAMSMACHINING MAY BE REQUIRED
INNER- USE WITH [22410], [22415], [22400] & [22450] CAMSMACHINING MAY BE REQUIRED
USE WITH [22111], [22107], [22108], [22109], [22114] & [22215]
CAMS- NOTE: ASM. HEIGHT OF 1.72
USE WITH [22303], [22305] & [22401] CAMS- NOTE: ASM HEIGHT
OF 1.72- MACHINING MAY BE REQUIRED
USE WITH [22380] CAM
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
(22203), (22320), (22301) CAMSHAFTS. NOTE: ASM HEIGHT OF
1.72 - MACHINING MAY BE REQUIRED.
HARDENED 11/32" STEM
LONG SLOT
CHROME MOLY- USE WITH [46611] & [46627] SPRINGS
PLATES MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER
MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER
PRESSURE 500 LBS. EXC. ROLLER
PLATES (ONE PIECE CONSTRUCTION) EXC. ROLLER
PLATES. (ONE PIECE CONSTRUCTION) EXC. ROLLER
SCREW-IN-SEE CHART FOR DIMENSIONS
5/16" THICK-MUST BE USED WITH SCREW-IN ROCKER ARM
STUDS. (FLAT)
STUDS. (FLAT)
3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM
STUDS. (RAISED)
STUDS. (RAISED)
25
Line
No.
6
Part Title
Part No
Gear Drive Set
48400Q
3pc Set
40201
40400
40520
48500T-9
48500W-9
7
48500T-9
48500W-9
267 ENG - 1979-82 - 8 Cyl. - 3.50 Bore (INC. EL CAMINO, CABALLERO)
Oil Pump
M-99HV-S
10550
10551
10552
26
INCLUDES DOUBLE ROLLER CHAIN, CAST IRON CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
EXCLUDES STOCK ROLLER CAM ENGINES.
EXCLUDING ROLLER CAM ENGINES, RACING APPLICATIONS
ONLY
265 ENG - 1955-57 - 8 Cyl. - 3.75 Bore
3pc Set
8
Description
I/S SHAFT W/STEEL GUIDE. EXC. CHEVY II
I/S SHAFT W/STEEL GUIDE. EXC. CHEVY II - 19MM INLET
THIS PUMP.
Line
No.
8
Part Title
Part No
Description
267 ENG - 1979-82 - 8 Cyl. - 3.50 Bore (INC. EL CAMINO, CABALLERO) (Continued)
Oil Pump
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
Screen Assy
12557
12558
12559
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
APPLICATION.
APPLICATION.
27
Line
No.
8
Part Title
Part No
Screen Assy
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
22450
Camshafts Using
Hydraulic Lifters
22470
C-400-P
22107
22108
22109
22110
22114
28
Description
APPLICATION.
APPLICATION.
CLASS I - NOT COMPUTER COMPATIBLE- NOTE: (50 STATES
ENG. EQUIPPED WITH CARBURETTED 267-350 CID V8. CAM
.347 EXH
.372 EXH
CLASS IV OEM # 3849346 NOT COMPUTER COMPATIBLE. CAM
.323 EXH
ENG EQUIPPED WITH CARBURETTED 267-350 CID V8. CAM LIFT
INT .272 EXH .272
INT .265 EXH .245
INT .265 EXH .280
INT .280 EXH .295
INT .280 EXH .280
Line
No.
8
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
22320
22401
22460
Hydraulic Lifters
32108
32109
INT .290 EXH .303
INT .265 EXH .294
CLASS II NOT COMPUTER COMPATIBLE OEM# 3863151
CLASS II NOT COMPUTER COMPATIBLE. NOTE: (50 STATES
INT .295 EXH .310
CLASS II NOT COMPUTER COMPATIBLE OEM# 3896962 CAM
LIFT INT .300 EXH .307
INT .295 EXH .295
INT .290 EXH .303
CLASS II NOT COMPUTER COMPATIBLE. CAM LIFT INT .296
EXH .296
EXH .320
EXH .291
EXH .324
CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT INT .320
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
.339 EXH
LUBE * CLASS I NOTE: (50 STATES LEGAL) IN CALIFORNIA USE
CARBURETTED 267-350 CID V8. NOT COMPUTER COMPATIBLE
CARBURETTED 267-350 CID V8.
29
Line
No.
8
Part Title
Part No
Hydraulic Lifters
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
501004
30
Description
LUBE CLASS II
LUBE CLASS II
HYD. ROLLER
USE WITH [22111], [22107], [22108], [22109], [22114] & [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
11/32" STEM
LONG SLOT
LENGTH- HEAT TREATED FOR GUIDE PLATES. 5/16 DIA.
STANDARD LENGTH HEAT TREATED FOR GUIDE PLATES- EXC.
ROLLER
Line
No.
8
Part Title
Part No
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
48400Q
3pc Set
40201
40400
40500
40520
48500T-9
48500W-9
9
Description
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
EXCLUDING STOCK ROLLER CAM ENGINES
INCLUDES SINGLE SEAMLESS SOLID ROLLER CHAIN (.335"
ROLLER), CAST IRON CAM SPROCKET & MULTIPLE KEYWAY
CRANK SPROCKET. EXCLUDING STOCK ROLLER CAM ENGINES
EXCLUDING ROLLER CAM ENGINES - RACING APPLICATIONS
ONLY
283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore
Oil Pump
M-99HV-S
31
Line
No.
9
Part Title
Part No
Oil Pump
10550
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
32
Description
283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore (Continued)
THIS PUMP.
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
Line
No.
9
Part Title
Part No
Description
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
Camshafts Using
Hydraulic Lifters
22450
22470
C-400-P
22107
22108
APPLICATION.
APPLICATION.
APPLICATION.
APPLICATION.
.280 INT .295 EXH
COMPATIBLE. NOTE: (50 STATES LEGAL) IN CALIFORNIA USE
CARBURETTED 267-350 V8. CAM LIFT .280 INT .295 EXH
.347 EXH
.372 EXH.
.323 EXH
INT .272 EXH .272
INT .265 EXH .245
33
Line
No.
9
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22109
22110
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
22320
22401
34
Description
INT .265 EXH .280
INT .280 EXH .295
INT .280 EXH .280
INT .290 EXH .303
INT .265 EXH .294
CLASS II NOT COMPUTER COMPATIBLE OEM# 3863151. CAM
INT .295 EXH .310
INT .295 EXH .295
INT .290 EXH .303
EXH .296
EXH .320
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
Line
No.
9
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
Hydraulic Lifters
22460
32108
32109
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
.339 EXH
USE WITH [22111], [22107], [22108], [22109], [22114] & [22215]
USE WITH [22303], [22305] & [22401] CAMS - NOTE: ASM HEIGHT
OF 1.72-MACHINING MAY BE REQUIRED.
USE WITH [22209] CAMSHAFT
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
35
Line
No.
9
Part Title
Part No
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
Gear Drive Set
48400
48400
48400Q
48400Q
3pc Set
40201
40201
36
Description
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING
ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE
INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER
AND RACING ENGINES UP TO 6,500 RPM. TRUCKS ONLY.
1967 NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS,
AND RACING ENGINES UP TO 6,500 RPM. CAR APPLICATIONS
ONLY.
AND RACING ENGINES UP TO 6,500 RPM. TRUCKS ONLY.
1967 QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS,
ONLY.
1959-1967 INCLUDES DOUBLE ROLLER CHAIN, CAST IRON CAM
EXCLUDING STOCK ROLLER CAM ENGINES. TRUCKS ONLY
1967 INCLUDES DOUBLE ROLLER CHAIN, CAST IRON CAM
EXCLUDES STOCK ROLLER CAM ENGINES. CAR APPLICATIONS
ONLY.
Line
No.
9
Part Title
Part No
3pc Set
40400
40400
40500
40500
40520
40520
48500T-9
48500T-9
48500W-9
48500W-9
10
1959-1967 INCLUDES DOUBLE SEAMLESS SOLID ROLLER
CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY
CRANK SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES.
TRUCKS ONLY
1967 INCLUDES DOUBLE SEAMLESS SOLID ROLLER CHAIN,
CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK
SPROCKET EXCLUDES STOCK ROLLER CAM ENGINES. CAR
APPLICATIONS ONLY.
1959-1967 INCLUDES SINGLE SEAMLESS SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET & MULTIPLE
KEYWAY CRANK SPROCKET. EXCLUDING STOCK ROLLER CAM
ENGINES. TRUCKS ONLY
1967 INCLUDES SINGLE SEAMLESS SOLID ROLLER CHAIN (.335"
CRANK SPROCKET. EXCLUDES STOCK ROLLER CAM ENGINES.
CAR APPLICATIONS ONLY.
1959-1967 INCLUDES 3/8" HY-VO TEC CHAIN, CAM SPROCKET
WITH LIGHTENING HOLES & 9-MULTIPLE KEYWAY CRANK
SPROCKET RACING APPLICATIONS ONLY. EXCLUDING STOCK
ROLLER CAM ENGINES. TRUCKS ONLY
1967 INCLUDES 3/8" HY-VO TEC CHAIN, CAM SPROCKET WITH
RACING APPLICATIONS ONLY. EXCLUDES STOCK ROLLER CAM
ENGINES. CAR APPLICATIONS ONLY.
TRUCKS ONLY
1967 INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250"
CAR APPLICATIONS ONLY.
ROD AND CLAIMER ENGINES. TRUCKS ONLY
1967 INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250"
ROD AND CLAIMER ENGINES. CAR APPLICATIONS ONLY
4.8-V (293) ENG - 1999-07 - 8 Cyl. - 3.78 Bore GEN III VIN C,V
Oil Pump
11
Description
10295
10296
1999-2006 HI PRESSURE PUMP (10% MORE PRESSURE)
1999-2006 HI VOL PUMP (18% MORE VOLUME OF OIL)
FEATURES: HIGH PRESSURE RELIEF SPRING SUPPLIED.
302 ENG - 1967-69 - 8 Cyl. 4.000 Bore (SPECIAL ENGINE FOR CAMARO)
Oil Pump
M-99HV-S
37
Line
No.
11
Part Title
Part No
Oil Pump
10550
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
38
Description
302 ENG - 1967-69 - 8 Cyl. 4.000 Bore (SPECIAL ENGINE FOR CAMARO) (Continued)
THIS PUMP.
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
Line
No.
11
Part Title
Part No
Description
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
22450
Camshafts Using
Hydraulic Lifters
22470
C-400-P
22107
22108
APPLICATION.
APPLICATION.
APPLICATION.
APPLICATION.
CLASS I - NOT COMPUTER COMPATIBLE- NOTE: (50 STATES
ENG. EQUIPPED WITH CARBURETTED 267-350 CID V8. CAM
.347 EXH
.372 EXH
.323 EXH
INT .272 EXH .272
INT .265 EXH .245
39
Line
No.
11
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22109
22110
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
22320
22401
40
Description
INT .265 EXH .280
INT .280 EXH .295
INT .280 EXH .280
INT .290 EXH .303
INT .265 EXH .294
INT .295 EXH .310
INT .295 EXH .295
INT .290 EXH .303
EXH .296
EXH .320
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
Line
No.
11
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
Hydraulic Lifters
22460
32108
32109
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
.339 EXH
HYD. ROLLER
USE WITH [22111], [22107], [22108], [22109], [22114] & [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
41
Line
No.
11
Part Title
Part No
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
48400Q
3pc Set
40201
40400
40500
40520
48500T-9
42
Description
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
EXCLUDES STOCK ROLLER CAM ENGINES
CRANK SPROCKET. EXCLUDES STOCK ROLLER CAM ENGINES
EXCLUDES STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY
Line
No.
11
Part Title
Description
3pc Set
12
Part No
48500W-9
305 ENG - 1976-93 - 8 Cyl. - 3.74 Bore (INCLUDES TRUCKS)
Oil Pump
M-99HV-S
10550
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
1982-1987 HI VOL PUMP- MORE VOL AND PRESSURE THAN
STOCK PUMP. INCLUDES SCREEN, MAY REQUIRE CUTTING
PAN BAFFLES.
1982-1987 HI VOL PUMP (25% ADD'L VOL OF OIL) - FEATURES:
INCLUDES I/S SHAFT W/STEEL GUIDE. EXC CHEVY II
INCLUDES I/S SHAFT W/STEEL GUIDE. EXC CHEVY II - 19MM
INLET
SHAFTS EXTENDED INTO COVER FOR SUPPORT. RELIEF
VALVE SPRING HAS SCREW IN PLUG. I/S SHAFT WITH STEEL
GUIDE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE
USED WITH THIS PUMP.
1982-1987 HI VOL PUMP (10% ADD'L VOL OF OIL) FEATURES:
SHAFTS EXTENDED INTO COVER FOR SUPPORT. REFIEF
VALVE SPRING HAS SCREW IN PLUG. I/S SHAFT W/STEEL
GUIDE. HAS ANTI-CAVITATION GROOVES. EITHER A BOLT ON
OR PRESS IN SCREEN CAN BE USED WITH THIS PUMP. RACING
APPLICATIONS ONLY
1982-1987 STANDARD VOLUME VERSION OF THE 10550 PUMP.
VALVE SPRING HAS SCREW IN PLUG. I/S SHAFT W/STEEL
GUIDE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE
USED WITH THIS PUMP.
VALVE SPRING HAS SCREW IN PLUG. I/S SHAFT WITH STEEL
GUIDE. HAS ANTI-CAVITATION GROOVES. EITHER A BOLT ON
OR PRESS IN SCREEN CAN BE USED WITH THIS PUMP. RACING
APPLICATIONS ONLY
1982-1987 HI VOLUME PUMP (25% ADD'L VOLUME) FEATURES:
VALVE HAS SCREW IN PLUG. I/S SHAFT W/STEEL GUIDE.
INCLUDES STOCK SPRING.
VALVE HAS SCREW IN PLUG. I/S SHAFT WITH STEEL GUIDE.
HAS ANTI-CAVITATION GROOVES. RACING APPLICATIONS
ONLY
1982-1987 HI VOL ALUMINUM BILLET (25% ADD'L VOL) PROTECTIVE ANODIZED HARDCOAT. SCREEN OFFSET FOR
CIRCLE TRACK APPLICATIONS INTEGRATED INTO PUMP
SHAFT & OPTIONAL RELIEF SPRINGS. FOR 7" PANS. RACING
ONLY.
43
Line
No.
12
Part Title
Part No
Oil Pump
10050-750SS
10050-825SS
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
22450
22470
44
Description
305 ENG - 1976-93 - 8 Cyl. - 3.74 Bore (INCLUDES TRUCKS) (Continued)
1982-1987 HI VOL ALUMINUM BILLET (25% ADD'L VOL) PROTECTIVE ANODIZED HARDCOAT. SCREEN INTEGRATED
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT & OPTIONAL RELIEF SPRINGS. FOR 7½" PANS.
STREET & STRIP APPLICATIONS.
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT & OPTIONAL RELIEF SPRINGS. FOR 8¼" PANS.
STREET AND STRIP.
1982-1987 BOLT ON SCREEN. USE W/7" DEEP STOCK TYPE
PAN. NOTE: CLEARANCE BETWEEN THE BOLTS AND HOLES
ALLOWS 3/16 TO 1/4" ADJUSTMENT UP OR DOWN TO CUSTOM
FIT YOUR APPLICATION. BOLT ON SCREEN FOR 10555 PUMP.
1982-1987 BOLT ON SCREEN. USE WITH 7 1/2" DEEP STOCK
TYPE PAN. NOTE: CLEARANCE BETWEEN THE BOLTS AND
HOLES ALLOWS 3/16 TO 1/4" ADJUSTMENT UP OR DOWN TO
CUSTOM FIT YOUR APPLICATION.
1982-1987 BOLT ON SCREEN. USE WITH 8" DEEP STOCK TYPE
PAN. NOTE: CLEARANCE BETWEEN THE BOLTS AND HOLES
ALLOWS 3/16 TO 1/4" ADJUSTMENT UP OR DOWN TO CUSTOM
FIT YOUR APPLICATION.
1982-1987 BOLT ON SCREEN. USE WITH 7" DEEP OVAL TRACK
PAN. NOTE: MESH IS TO THE RIGHT. NOTE: CLEARANCE
BETWEEN THE BOLTS AND THE HOLES ALLOWS 3/16" TO 1/4"
APPLICATION.
1982-1987 BOLT ON SCREEN. USE WITH 7 1/2" DEEP OVAL
TRACK PAN. NOTE: MESH IS TO THE RIGHT. NOTE:
CLEARANCE BETWEEN THE BOLTS AND THE HOLES ALLOWS
3/16" TO 1/4" ADJUSTMENT UP OR DOWN TO CUSTOM FIT
YOUR APPLICATION.
1982-1987 CLASS I NOT COMPUTER COMPATIBLE. NOTE: (50
STATES LEGAL) IN CALIFORNIA USE ONLY IN 1987 & OLDER
S.B. CHEVY ENG. EQUIPPED WITH CARBURETTED 267-350 V8.
1982-1987 KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS &
1982-1987 CLASS IV OEM #3927140 NOT COMPUTER
COMPATIBLE. CAM LIFT .329 INT .341 EXH
1982-1987 CLASS IV NOT COMPUTER COMPATIBLE. CAM LIFT
.347 INT .347 EXH
.360 INT .372 EXH.
1982-1987 CLASS IV OEM #3849346 NOT COMPUTER
COMPATIBLE. CAM LIFT .382 INT .394 EXH
.323 INT .323 EXH
1982-1987 CLASS IV OEM #3965754. CAM LIFT .341 INT .357 EXH
NOT LISTED
Line
No.
12
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
C-400-P
1982-1987 NOT COMPUTER COMPATIBLE. CAM LIFT NOT LISTED
22107
S.B. CHEVY ENG EQUIPPED WITH CARBURETTED 267-350 CID
V8. CAM LIFT INT .272 EXH .272
STATES LEGAL) IN CALIFORNIA. CAM LIFT .265 INT .281 EXH
1982-1987 CLASS II NOT COMPUTER COMPATIBLE OEM#
3863151. CAM LIFT .298 INT .298 EXH
1982-1987 CLASS II NOT COMPUTER COMPATIBLE. NOTE: (50
1982-1987 CLASS II NOT COMPUTER COMPATIBLE OEM#
3896962 CAM LIFT INT .300 EXH .307
1982-1987 CLASS II NOT COMPUTER COMPATIBLE. CAM LIFT
INT .296 EXH .296
INT .312 EXH .320
INT .291 EXH .291
22108
22109
22110
22111
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
45
Line
No.
12
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22234
22301
22303
22305
22320
22401
22460
Hydraulic Lifters
32108
32109
32110
32111
32200
32210
Camshafts Using
22129
22131
22221
22298
22397
22398
Mell Lube
Mechanical Lifters
46
Description
M-10012
JB-992
298404
INT .320 EXH .324
1982-1987 CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT
INT .320 EXH .320
.310 INT .325 EXH
.325 INT .339 EXH
.302 INT .302 EXH
.340 INT .355 EXH
.339 INT .339 EXH
1982-1987 KIT INCLUDES 1-[22108] CAM, 16-[29817] LIFTERS &
4OZ MELL LUBE * CLASS I NOTE: (50 STATES LEGAL) IN
CALIFORNIA USE ONLY IN 1987 & OLDER S.B. CHEVY ENG.
EQUIPPED WITH CARBURETTED 267-350 CID V8. NOT
COMPUTER COMPATIBLE.
4OZ MELL LUBE CLASS I NOTE: (50 STATES LEGAL) IN
4OZ MELL LUBE CLASS II NOT COMPUTER COMPATIBLE
4OZ MELL LUBE CLASS II NOT COMPUTER COMPATIBLE
1987-1993 CLASS I NOT COMPUTER COMPATIBLE. LIFT .434 INT
.462 EXH.
.462 INT .4690 EXH
1987 CLASS I NOT COMPUTER COMPATIBLE. 1987 305 ONLY.
.478 INT .500 EXH
.537 INT .514 EXH
1982-1987 SPECIAL DESIGNED METERING SYSTEM
1982-1987 CHILLED IRON ONLY USE W/STEEL OR HARDFACED
Line
No.
12
Part Title
Part No
Description
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
1982-1987 HYD. ROLLER
1982-1987
1982-1987
1982-1987 HEAD DIA. 1.940 INT.
1982-1987 HEAD DIA. 1.500 EXH.
1982-1987 HEAD DIA. 2.020 INT.
1982-1987 HEAD DIA. 1.600 EXH.
1982-1987 OUTER- USE WITH [22410], [22415], [22400] & [22450]
CAMS- MACHINING MAY BE REQUIRED
1982-1987
1982-1987 INNER- USE WITH [22410], [22415], [22400] & [22450]
CAMS- MACHINING MAY BE REQUIRED
1982-1987
1982-1987 USE WITH [22111], [22107], [22108], [22109], [22114] &
[22215] CAMS- NOTE: ASM. HEIGHT OF 1.72
1982-1987 USE WITH [22303], [22305] & [22401] CAMS- NOTE:
ASM HEIGHT OF 1.72- MACHINING MAY BE REQUIRED
1982-1987 USE WITH [22380] CAM
1982-1987 USE WITH [22209] CAM
1982-1987 USE WITH MTC-1, (22110), (22115), (22200), (22210),
(22213), (22203), (22320), (22301) CAMSHAFTS. NOTE: ASM
HEIGHT OF 1.72 - MACHINING MAY BE REQUIRED.
1982-1987 HARDENED 11/32" STEM
1982-1987 LONG SLOT
1982-1987 CHROME MOLY- USE WITH [46611] & [46627] SPRINGS
1982-1987 CHROME MOLY- USE WITH [46620] & [46635] SPRINGS
1982-1987 MAX. SPRING PRESSURE 350 LBS. 5/16 DIA.
STANDARD LENGTH- HEAT TREATED FOR GUIDE PLATES. EXC.
ROLLER
1982-1987 5/16 DIA. + .100 O/S LENGTH-HEAT TREATED FOR
GUIDE PLATES MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER
1982-1987 MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER
1982-1987 5/16 DIA. STANDARD LENGTH - HEAT TREATED FOR
1982-1987 5/16 DIA. + .100 O/S LENGTH - HEAT TREATED FOR
GUIDE PLATES (ONE PIECE CONSTRUCTION) EXC. ROLLER
GUIDE PLATES. (ONE PIECE CONSTRUCTION) EXC. ROLLER
GUIDE PLATES. (ONE PIECE CONSTRUCTION) EXC. ROLLER
1982-1987 SCREW-IN-SEE CHART FOR DIMENSIONS
1982-1987 5/16" THICK-MUST BE USED WITH SCREW-IN
ROCKER ARM STUDS. (FLAT)
1982-1987 3/8" THICK-MUST BE USED WITH SCREW-IN ROCKER
ARM STUDS. (FLAT)
1982-1987 3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER
ARM STUDS. (RAISED)
1982-1987 5/16" THICK- MUST BE USED WITH SCREW-IN
ROCKER ARM STUDS. (RAISED)
47
Line
No.
12
Part Title
Part No
Gear Drive Set
48400
48400
48400Q
48400Q
48400Q
48450
3pc Set
40201
40400
40500
40520
48
Description
AND RACING ENGINES TO 6,500 RPM. TRUCK APPLICATIONS
ONLY
AND RACING ENGINES TO 6,500 RPM. CAR APPLICATIONS ONLY
ONLY
ONLY.
ONLY.
RACING ENGINES UP TO 6,500 RPM. CAR APPLICATIONS ONLY
EXCLUDING STOCK ROLLER CAM ENGINES, CARS AND TRUCKS
CRANK SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES,
CARS AND TRUCKS
ENGINES, CARS AND TRUCKS
SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY. CARS AND TRUCKS
Line
No.
12
Part Title
Part No
3pc Set
48500T-9
48500W-9
13
Description
EXC. VIN E AND CA EMISSIONS.
ROD AND CLAIMER ENGINES. EXCLUDES VIN E AND CA
EMISSIONS
307 ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore (INCLUDES TRUCKS)
Oil Pump
M-99HV-S
10550
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
THIS PUMP.
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
49
Line
No.
13
Part Title
Part No
Oil Pump
10050-700CT
10050-750SS
10050-825SS
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
50
Description
307 ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore (INCLUDES TRUCKS) (Continued)
AND STRIP.
APPLICATION.
APPLICATION.
APPLICATION.
APPLICATION.
.280 INT .295 EXH
.347 EXH
.372 EXH.
Line
No.
13
Part Title
Part No
Description
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
22415
22450
22470
C-400-P
22107
22108
22109
22110
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
.323 EXH
INT .272 EXH .272
INT .265 EXH .245
LEGAL) IN CALIFORNIA USE ONLY IN 1987 AND OLDER S.B.
CHEVY ENG EQUIPPED WITH CARBURETTED 267-350 CID V8.
CAM LIFT INT .265 EXH .280
EXH .296
EXH .320
51
Line
No.
13
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22233
22234
22301
22303
22305
22320
22401
22460
Hydraulic Lifters
32108
32109
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
52
Description
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
.339 EXH
HYD. ROLLER
Line
No.
13
Part Title
Part No
Description
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
48400Q
USE WITH [22111], [22107], [22108], [22109], [22114] & [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
RACING ENGINES TO 6,500 RPM. CAR APPLICATIONS ONLY
RACING ENGINES TO 6,500 RPM.
53
Line
No.
13
Part Title
Part No
Gear Drive Set
48450
3pc Set
40201
40400
40500
40520
48500T-9
48500W-9
14
16
10295
10296
1999-2006 HI PRESSURE PUMP (10% MORE PRESSURE)
FEATURES: HIGH PRESSURE RELIEF SPRING SUPPLIED.
5.3-O,J,3 (325) OHV ENG - 2007 - 8 Cyl. - 3.78 Bore GEN IV VIN O,J,3
Oil Pump
10355
Mell Lube
M-10012
HI VOL PUMP (33% ADD'L VOL OF OIL) GEN III APPLICATIONS.
STD VOL GEN IV APPLICATIONS. FEATURES: HARDCOAT
ANODIZED BODY, CAST IRON PHOSPHATE COATED COVER,
ADJUSTABLE PRESSURE W/OPTIONAL SPRING. (AVALANCHE,
SUBURBAN) VIN 3
327 ENG - 1962-69 - 8 Cyl. - 4.000 Bore (INCLUDES TRUCKS 1962-68)
Oil Pump
M-99HV-S
10550
10551
10552
54
INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER
CAMBUTTON, LOCK PLATE AND BOLTS, ADJUSTED W/5 COLOR
CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR
STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO
6,500 RPM. TRUCK APPLICATIONS ONLY
CRANK SPROCKET. EXCLUDING STOCK ROLLER CAM ENGINES
EXCLUDING STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY.
5.3-T,Z (325) ENG - 1999-07 - 8 Cyl. - 3.78 Bore GEN III VIN T,Z
Oil Pump
15
Description
THIS PUMP.
Line
No.
16
Part Title
Part No
Description
327 ENG - 1962-69 - 8 Cyl. - 4.000 Bore (INCLUDES TRUCKS 1962-68) (Continued)
Oil Pump
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
Screen Assy
12557
12558
12559
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
APPLICATION.
APPLICATION.
55
Line
No.
16
Part Title
Part No
Screen Assy
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
Camshafts Using
Hydraulic Lifters
22450
22470
C-400-P
22107
22108
22109
22110
22111
56
Description
APPLICATION.
APPLICATION.
.280 INT .295 EXH
.347 EXH
.372 EXH.
.323 EXH
LEGAL) IN CALIFORNIA FOR USE IN 1987-95 S.B. CHEVY ENG.
Line
No.
16
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
22320
22401
22460
Hydraulic Lifters
32108
EXH .296
EXH .320
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
.339 EXH
ONLY IN 1987 AND OLDER S.B. CHEVY ENG. EQUIPPED WITH
57
Line
No.
16
Part Title
Part No
Hydraulic Lifters
32109
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
58
Description
HYD. ROLLER
USE WITH [22111], [22107], [22108], [22109], [22114], [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
Line
No.
16
Part Title
Part No
Description
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
48400Q
3pc Set
40201
40400
40500
40520
48500T-9
48500W-9
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
RACING ENGINES TO 6,500 RPM.
EXCLUDING STOCK ROLLER CAM ENGINES.
EXCLUDING STOCK ROLLER CAM ENGINES.
CRANK SPROCKET. EXCLUDING STOCK ROLLER CAM ENGINES.
EXCLUDING STOCK ROLLER CAM ENGINES. RACING
APPLICATIONS ONLY
ROD AND CLAIMER ENGINES
59
Line
No.
17
Part Title
Part No
Oil Pump
M-99HV-S
10550
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
60
Description
THIS PUMP.
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
Line
No.
17
Part Title
Part No
Description
Screen Assy
12557
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
Camshafts Using
Hydraulic Lifters
22450
22470
C-400-P
22107
22108
APPLICATION.
APPLICATION.
APPLICATION.
APPLICATION.
.280 INT .295 EXH
.347 EXH
.372 EXH.
.323 EXH
61
Line
No.
17
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22109
22110
22111
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
62
Description
CAM LIFT INT .265 EXH
EXH .296
EXH .320
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
Line
No.
17
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
22320
22401
22460
Hydraulic Lifters
32108
32109
32110
32111
32200
32210
Camshafts Using
22129
22131
22221
22280
22298
22397
22398
Mell Lube
Mechanical Lifters
M-10012
JB-992
298404
Hydraulic Lifters
JB-2079
298174
298184
451014
451024
451034
451044
466114
Valves
Valve Spring with
Mechanical Lifters
.302 EXH
.355 EXH
.339 EXH
1987-1994 CLASS I NOT COMPUTER COMPATIBLE. LIFT .434 INT
.462 EXH.
.462 INT .4690 EXH
.289 INT .300 EXH
1967-1987 CLASS II, NOT COMPUTER COMPATIBLE. FOR
ENGINE ORGINALLY EQUIPPED W/ROLLER CAM. USE ONLY IN
1987 & OLDER. CAM LIFT INT .330 EXH .335
.478 INT .500 EXH
.528 INT .528 EXH
HYD. ROLLER
63
Line
No.
17
Part Title
Part No
Valve Spring with
Mechanical Lifters
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
476104
498404
475074
475184
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
64
Description
48400
USE WITH [22111], [22107], [22108], [22109], [22114], [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
CHROME MOLY - USE WITH [46611] & [46627] SPRINGS
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
1967-1988 NOISY - 8620 CARBURIZED STEEL GEARS, ROLLER
CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED W/5
OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS.
RECOMMENDED FOR STREET AND STRIP, CLAIMER, RACING
ENGINES TO 6,500 RPM. VIN 8 82-86 ONLY. CAR APPLICATIONS
ONLY.
Line
No.
17
Part Title
Part No
Description
Gear Drive Set
48400
48400Q
48400Q
48450
3pc Set
40201
40400
40500
40520
48500T-9
48500T-9
ONLY
1967-1988 QUIET - 8620 CARBURIZED STEEL GEARS, ROLLER
ENGINES TO 6,500 RPM. VIN 8 82-86 ONLY. CAR APPLICATIONS
ONLY.
ONLY
RACING ENGINES UP TO 6,500 RPM. CARS AND TRUCK
APPLICATIONS
CRANK SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES
ENGINES.
SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES.
RACING APPLICATIONS ONLY
VIN 8 1982-86 ONLY. CAR APPLICATIONS ONLY.
TRUCK APPLICATIONS ONLY
65
Line
No.
17
Part Title
Part No
3pc Set
48500W-9
48500W-9
18
10295
10296
10355
Camshafts Using
Mell Lube
Retainers
22201
M-10012
475234
10295
10296
10355
10355
HI PRESSURE PUMP (10% MORE PRESSURE) VIN CODES U,N
ONLY
HI VOL PUMP (18% MORE VOLUME OF OIL) FEATURES: HIGH
PRESSURE RELIEF SPRING SUPPLIED. VIN CODES U,N ONLY
2007 HI VOL PUMP (33% ADD'L VOL OF OIL) GEN III
APPLICATIONS. STD VOL GEN IV APPLICATIONS. FEATURES:
HARDCOAT ANODIZED BODY, CAST IRON PHOSPHATE
COATED COVER, ADJUSTABLE PRESSURE W/OPTIONAL
SPRING. (AVALANCHE)
2007 HI VOL PUMP (33% ADD'L VOL OF OIL) GEN III
APPLICATIONS. STD VOL GEN IV APPLICATIONS. FEATURES:
HARDCOAT ANODIZED BODY, CAST IRON PHOSPHATE
COATED COVER, ADJUSTABLE PRESSURE W/OPTIONAL
SPRING. (SUBURBAN, YUKON XL 1/2 TON) VIN Y ONLY
10355
ADJUSTABLE PRESSURE W/OPTIONAL SPRING. STD VOL OIL
PUMP. FEATURES: HARDCOAT ANODIZED BODY, CAST IRON
PHOSPHATE COATED COVER, ADJUSTABLE PRESSURE
W/OPTIONAL SPRING.
400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore (INCLUDES TRUCKS) SMALL BLOCK
Oil Pump
66
CHROME MOLY.
6.2-8 (378) OHV ENG - 2007 - 8 Cyl. - 4.06 Bore (EXCALADE, YUKON) VORTEC L92
Oil Pump
21
HI PRESSURE PUMP (10% MORE PRESSURE)
PRESSURE RELIEF SPRING SUPPLIED.
ADJUSTABLE PRESSURE W/OPTIONAL SPRING. HI VOL PUMP
(33% ADD'L VOL OF OIL) FEATURES: HARDCOAT ANODIZED
BODY, CAST IRON PHOSPHATE COATED COVER, ADJUSTABLE
PRESSURE W/OPTIONAL SPRINGS. VIN CODE G, S, LS1, LS6
GEN III & GEN IV ENGINES ONLY.
EXH
6.0 (364) ENG - 1999-07 - 8 Cyl. - 4.00 Bore INCLUDES VANS, TRUCKS
Oil Pump
20
ROD AND CLAIMER ENGINES. VIN 8 1982-86 ONLY. CAR
APPLICATIONS ONLY.
ROD AND CLAIMER ENGINES. TRUCK APPLICATIONS ONLY
5.7-G,S (350) ENG - 1997-2004 - 8 Cyl. - 4.000 Bore LS1, LS6 (CARS ONLY)
Oil Pump
19
Description
10550
Line
No.
21
Part Title
Part No
Description
400 S.B. ENG - 1970-80 - 8 Cyl. - 4 1/8 Bore (INCLUDES TRUCKS) SMALL BLOCK (Continued)
Oil Pump
10551
10552
10552C
10553
10554
10555
10555C
10990
10990C
10050-700CT
10050-750SS
10050-825SS
Screen Assy
12557
I/S SHAFT W/STEEL GUIDE. EXC. CHEVY II 19MM INLET
THIS PUMP.
APPLICATIONS ONLY
THIS PUMP.
APPLICATIONS ONLY
SPRING.
AND STRIP.
67
Line
No.
21
Part Title
Part No
Screen Assy
12558
12559
12564
12566
Torque Camshaft
MTC-1
CL-MTC-1
Camshafts Using
Mechanical Lifters
22400
22402
22404
22410
22415
Camshafts Using
Hydraulic Lifters
22450
22470
C-400-P
22107
22108
22109
68
Description
APPLICATION.
APPLICATION.
APPLICATION.
APPLICATION.
.280 INT .295 EXH
.347 EXH
.372 EXH.
.323 EXH
Line
No.
21
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
22110
22111
22114
22115
22126
22200
22203
22210
22213
22215
22230
22232
22233
22234
22301
22303
22305
22320
22401
EXH .296
EXH .320
EXH .291
EXH .324
EXH .320
.325 EXH
.339 EXH
.302 EXH
.355 EXH
69
Line
No.
21
Part Title
Part No
Camshafts Using
Hydraulic Lifters
Hydraulic Lifters
22460
32108
32109
32110
32111
32200
32210
Camshafts Using
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
22398
M-10012
JB-992
298404
JB-2079
298174
298184
451014
451024
451034
451044
466114
466204
466274
Valve Spring with
Hydraulic Lifters
466364
VS-380
466204
466204
466354
466354
Valve Locks
Rocker Arms
Retainers
70
Description
476104
498404
475074
475184
.339 EXH
HYD. ROLLER
USE WITH [22111], [22107], [22108], [22109], [22114], [22215]
USE WITH MTC-1, (22110), (22115), (22200), (22210), (22213),
LONG SLOT
Line
No.
21
Part Title
Part No
Description
500314
500614
500674
501004
501014
501024
501034
Rocker Arm Stud
Guide Plates
MRDS-941
MRDS-1920
MRDS-2920
MGP1004
MGP1014
MGP1024
MGP1034
Gear Drive Set
48400
48400
48400Q
48400Q
3pc Set
40201
40201
STUDS. (FLAT)
STUDS. (FLAT)
STUDS. (RAISED)
STUDS. (RAISED)
ENGINES TO 6,500 RPM. S. B. CAR APPLICATIONS ONLY
ENGINES TO 6,500 RPM. S. B. TRUCK APPLICATIONS ONLY
ENGINES TO 6,500 RPM. S.B. CAR APPLICATIONS ONLY
ENGINES TO 6,500 RPM. S.B. TRUCK APPLICATIONS ONLY
EXCLUDING STOCK ROLLER CAM ENGINES. SMALL BLOCK CAR
APPLICATIONS ONLY
EXCLUDING STOCK ROLLER CAM ENGINES. SMALL BLOCK
71
Line
No.
21
Part Title
Part No
3pc Set
40400
40400
40500
40500
40520
40520
48500T-9
48500W-9
48500W-9
22
SMALL BLOCK CAR APPLICATIONS ONLY
SMALL BLOCK TRUCK APPLICATIONS ONLY
ENGINES. SMALL BLOCK CAR APPLICATIONS ONLY
ENGINES. SMALL BLOCK TRUCK APPLICATIONS ONLY
SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES. SMALL
BLOCK CAR RACING APPLICATIONS ONLY
SPROCKET EXCLUDING STOCK ROLLER CAM ENGINES. SMALL
BLOCK TRUCK RACING APPLICATIONS ONLY
SMALL BLOCK CAR APPLICATIONS ONLY
ROD AND CLAIMER ENGINES. SMALL BLOCK CAR
APPLICATIONS ONLY
ROD AND CLAIMER ENGINES. SMALL BLOCK TRUCK
APPLICATIONS ONLY
Oil Pump
10770
10774
10775
10778
72
Description
HI VOL PUMP (25% ADD'L VOL OF OIL) FEATURES: INCLUDES
I/S SHAFT W/STEEL GUIDE. WILL USE STOCK 3/4" PRESS-IN
SCREEN.
HI VOL PUMP (25% ADD'L VOL OF OIL) FEATURES: SAME AS
10777 PUMP W/O THREADED INLET.
Line
No.
22
Part Title
Part No
Description
Oil Pump
10778C
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
22214
22296
22302
22306
22471
Hydraulic Lifters
32100
EXTENDED INTO COVER FOR SUPPORT, RELIEF VALVE HAS
SCREW IN PLUG. THE DRIVE SHAFT AND INTERMEDIATE
SHAFT NOW HAVE A MALE/FEMALE HEX CONNECTION. HAS
ANTI-CAVITATION GROOVES. REQUIRES SPECIAL SCREW IN
SCREEN. RACING APPLICATIONS ONLY.
SHAFT & OPTIONAL RELIEF SPRINGS. FOR 8" PANS. STREET
AND STRIP.
AND STRIP.
SCREW IN SCREEN FOR [10777] PUMP. TRUCK PAN (APPROX.
9" DEEP)
CLASS I NOT COMPUTER COMPATIBLE EXC. H.D. AND HI PERF.
USE VS-320 SPRING W/INSTALLED HGT. OF 1.90. NOT
COMPUTER COMPATIBLE. CAM LIFT INT .281 EXH .296
LUBE. CLASS I EXC. H.D. AND HI PERF. USE WITH VS-320
SPRING W/INSTALLED HGT. OF 1.90. NOT COMPUTER
COMPATIBLE
CLASS III NOT COMPUTER COMPATIBLE OEM #3904362. CAM
CLASS IV NOTE: NOT COMPUTER COMPATIBLE 1965-66
REQUIRES A 3/16" WIDE X 7/16" DEEP GROOVE CUT IN THE
REAR BEARING JOURNAL. CAM LIFT INT .356 EXH .376
CLASS I NOT COMPUTER COMPATIBLE. CAM LIFT INT .234 EXH
.253
.273
EXH .310
EXH .295
EXH .297
EXH .302
EXH .325
CLASS IV NOT COMPUTER COMPATIBLE. CAM LIFT INT .329
EXH .337
73
Line
No.
22
Part Title
Part No
Camshafts Using
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
Valve Spring with
Mechanical Lifters
451054
451064
451074
451084
VS-320
466154
Valve Spring with
Hydraulic Lifters
Valve Locks
Rocker Arms
466164
466224
466224
473004
476104
498684
500154
500164
Guide Plates
500294
500304
MGP1064
MGP1074
Gear Drive Set
48410
48410Q
74
Description
EXH .376
.639 EXH
EXH .336
.578 EXH
HYD. ROLLER
MUST BE USED WITH AN ADJUSTABLE VALVE TRAIN - SET AT
ZERO LASH
USE WITH [22100], [MTC-2], [22106] CAMS- NOTE: ASM. HEIGHT
OF 1.88
OUTER- USE WITH [22427] CAM- MACHINING MAY BE REQUIRED
INNER- USE WITH [22427] CAM- MACHINING MAY BE REQUIRED
USE WITH [22214], [22204], [22296], [22306], [22302], [22100]
CAMS- NOTE: ASM. HEIGHT OF 1.88- MACHINING MAY BE
REQUIRED.
USE WITH [22396] CAM- MACHINING MAY BE REQUIRED
HARDENED 3/8" STEM 2 GROOVE
LONG SLOT
PLATES
MAX. SPRING PRESSURE 350 LBS. 9.230 LENGTH - HEAT
TREATED FOR GUIDE PLATES.
MAX. SPRING PRESSURE 350 LBS.
STUDS. (RAISED)
STUDS. (RAISED)
CAMBUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED
RACING ENGINES UP TO 6,500 RPM. FOR CAR AND TRUCK
APPLICATIONS
APPLICATIONS
Line
No.
22
Part Title
Part No
3pc Set
40205
40401
40510
48510T-9
48510W-9
48510W-9
23
Description
SPROCKET, MULTIPLE KEYWAY CRANK SPROCKET. CAR AND
TRUCK APPLICATIONS.
TRUCK APPLICATIONS.
INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN (.335"
CRANK SPROCKET EXC. STOCK ROLLER CAM ENGINES. FOR
CAR AND TRUCK APPLICATIONS
TRACK, HOT ROD, CLAIMER ENGINES. FOR CAR AND TRUCK
APPLICATIONS
RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK,
HOT ROD, CLAIMER ENGINES. FOR CAR AND TRUCK
APPLICATIONS
ROD, CLAIMER ENGINES. FOR CAR AND TRUCK APPLICATIONS
400 B.B. ENG - 1970-1973 - 8 Cyl. - 4.125 Bore (INCLUDES TRUCKS) BIG BLOCK
Oil Pump
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
INCLUDES I/S SHAFT W/STEEL GUIDE. WILL USE STOCK 3/4"
PRESS-IN SCREEN.
SAME AS 10777 PUMP W/O THREADED INLET.
SHAFTS EXTENDED INTO COVER FOR SUPPORT, RELIEF
VALVE HAS SCREW IN PLUG. THE DRIVE SHAFT AND
INTERMEDIATE SHAFT NOW HAVE A MALE/FEMALE HEX
CONNECTION. HAS ANTI-CAVITATION GROOVES. REQUIRES
SPECIAL SCREW IN SCREEN. RACING APPLICATIONS ONLY.
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT & OPTIONAL RELIEF SPRINGS. FOR 8" PANS.
STREET AND STRIP.
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT & OPTIONAL RELIEF SPRINGS. FOR 9" PANS.
STREET AND STRIP.
1970-1971 SCREW IN SCREEN FOR [10777] PUMP. TRUCK PAN
(APPROX. 9" DEEP)
1970-1971 CLASS I NOT COMPUTER COMPATIBLE EXC. H.D.
AND HI PERF. USE VS-320 SPRING W/INSTALLED HGT. OF 1.90.
NOT COMPUTER COMPATIBLE. CAM LIFT INT .281 EXH .296
75
Line
No.
23
Part Title
Part No
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
22214
22296
22302
22306
22471
Hydraulic Lifters
Camshafts Using
32100
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
451054
451064
451074
451084
VS-320
Valve Spring with
Mechanical Lifters
76
Description
400 B.B. ENG - 1970-1973 - 8 Cyl. - 4.125 Bore (INCLUDES TRUCKS) BIG BLOCK (Continued)
4OZ MELL LUBE. CLASS I EXC. H.D. & HI PERF. USE WITH VS320 SPRING W/INSTALLED HGT. OF 1.90. NOT COMPUTER
COMPATIBLE
1970-1971 CLASS III NOT COMPUTER COMPATIBLE OEM
#3904362. CAM LIFT .306 INT .306 EXH
1970-1971 CLASS IV NOTE: NOT COMPUTER COMPATIBLE 196566 REQUIRES A 3/16" WIDE X 7/16" DEEP GROOVE CUT IN THE
1970-1971 CLASS I NOT COMPUTER COMPATIBLE. CAM LIFT INT
.234 EXH .253
.258 EXH .273
INT .295 EXH .310
INT .295 EXH .295
INT .294 EXH .297
INT .302 EXH .302
INT .311 EXH .325
INT .329 EXH .337
4OZ MELL LUBE CLASS I NOT COMPUTER COMPATIBLE
INT .368 EXH .376
.639 EXH
INT .329 EXH .336
.578 EXH
1970-1971
1970-1971 MUST BE USED WITH AN ADJUSTABLE VALVE TRAIN
- SET AT ZERO LASH
1970-1971 HEAD DIA. 2.190 INT.
1970-1971 HEAD DIA. 1.725 EXH.
1970-1971 HEAD DIA. 2.300 INT.
1970-1971 HEAD DIA. 1.880 EXH.
1970-1971 USE WITH [22100], [MTC-2] & [22106] CAMS- NOTE:
ASM. HEIGHT OF 1.88
Line
No.
23
Part Title
Part No
Description
Valve Spring with
Mechanical Lifters
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466224
Valve Locks
Rocker Arms
Retainers
473004
476104
498684
475064
475084
500154
500164
Guide Plates
500294
500304
MGP1064
MGP1074
Gear Drive Set
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
48510W-9
1970-1971 OUTER- USE WITH [22427] CAM- MACHINING MAY BE
REQUIRED
1970-1971 INNER- USE WITH [22427] CAM- MACHINING MAY BE
REQUIRED
1970-1971 USE WITH [22214], [22204], [22296], [22306], [22302] &
[22100] CAMS- NOTE: ASM. HEIGHT OF 1.88- MACHINING MAY
BE REQUIRED.
1970-1971 USE WITH [22396] CAM- MACHINING MAY BE
REQUIRED
1970-1971 HARDENED 3/8" STEM 2 GROOVE
1970-1971 LONG SLOT
1970-1971 CHROME MOLY - USE WITH [46622] SPRING
1970-1971 MAX. SPRING PRESSURE 350 LBS. HEAT TREATED
FOR GUIDEPLATES
1970-1971 MAX. SPRING PRESSURE 350 LBS. 9.230 LENGTH HEAT TREATED FOR GUIDE PLATES.
1970-1971 MAX. SPRING PRESSURE 350 LBS.
ARM STUDS. (RAISED)
TRUCK APPLICATIONS.
TRUCK APPLICATIONS.
CRANK SPROCKET EXC. STOCK ROLLER CAM ENGINES. CAR
AND TRUCK APPLICATIONS
TRACK, HOT ROD, CLAIMER ENGINES. CAR APPLICATIONS
ONLY
HOT ROD, CLAIMER ENGINES. CAR APPLICATIONS ONLY
77
Line
No.
23
Part Title
48510W-9
ROD, CLAIMER ENGINES. CAR APPLICATIONS ONLY
Oil Pump
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
78
Description
3pc Set
24
Part No
SCREEN.
AND STRIP.
AND STRIP.
9" DEEP)
COMPATIBLE
CLASS IV NOTE: NOT COMPUTER COMPATIBLE CAM LIFT INT
.356 EXH .376
.382 EXH .394
.329 EXH .341
.253
.273
EXH .310
Line
No.
24
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
22214
22296
22302
22306
22471
Hydraulic Lifters
Camshafts Using
32100
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
Valve Spring with
Mechanical Lifters
451054
451064
451074
451084
VS-320
466154
Valve Spring with
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
466164
466224
466224
473004
476104
498684
475064
475084
500154
500164
Guide Plates
500294
500304
MGP1064
EXH .295
EXH .297
EXH .302
EXH .325
EXH .337
EXH .376
.639 EXH
EXH .336
.578 EXH
HYD. ROLLER
ZERO LASH
OF 1.88
USE WITH [22214], [22204], [22296], [22306], [22302], [22100]
REQUIRED.
LONG SLOT
CHROME MOLY - USE WITH [46622] SPRING
CHROME MOLY-USE WITH [46615] SPRING
PLATES
TREATED FOR GUIDE PLATES. EXC. 427 ENGINE
STUDS. (RAISED)
79
Line
No.
24
Part Title
Part No
Guide Plates
MGP1074
Gear Drive Set
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
48510W-9
48510W-9
25
STUDS. (RAISED)
APPLICATIONS
APPLICATIONS
TRUCK APPLICATIONS.
TRUCK APPLICATIONS.
ROLLER), CAST IRON CAM SPROCKET, MULTIPLE KEYWAY
CRANK SPROCKET EXC. STOCK ROLLER CAM ENGINES. FOR
CAR AND TRUCK APPLICATIONS
TRACK, HOT ROD, CLAIMER ENGINES. FOR CAR AND TRUCK
APPLICATIONS
HOT ROD, CLAIMER ENGINES. FOR CAR AND TRUCK
APPLICATIONS
ROD, CLAIMER ENGINES. FOR CAR AND TRUCK APPLICATIONS
427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore CAR APPLICATIONS ONLY
Oil Pump
10770
10774
10775
10778
10778C
80
Description
SCREEN.
Line
No.
25
Part Title
Part No
Description
427 ENG - 1966-69 - 8 Cyl. - 4.250 Bore CAR APPLICATIONS ONLY (Continued)
Oil Pump
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
22214
22296
22302
22306
22471
Hydraulic Lifters
Camshafts Using
32100
22385
22472
22480
SHAFT, OPTIONAL RELIEF SPRINGS. FOR 8" PANS. STREET
AND STRIP.
AND STRIP.
9" DEEP)
COMPATIBLE
CLASS IV NOTE: NOT COMPUTER COMPATIBLE 1966
.253
.273
EXH .310
EXH .295
EXH .297
EXH .302
EXH .325
EXH .337
EXH .376
.639 EXH
EXH .336
81
Line
No.
25
Part Title
Part No
Camshafts Using
Mell Lube
Mechanical Lifters
22485
Hydraulic Lifters
JB-7003
298174
298184
Valves
Valve Spring with
Mechanical Lifters
M-10012
298404
451054
451064
451074
451084
VS-320
466154
Valve Spring with
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
Guide Plates
466164
466224
466224
473004
476104
498684
475064
475084
MGP1074
MGP1074
Gear Drive Set
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
82
Description
.578 EXH
HYD. ROLLER
ZERO LASH
OF 1.88
USE WITH [22214], [22204], [22296], [22306], [22302], [22100]
REQUIRED.
LONG SLOT
STUDS. (RAISED)
STUDS. (RAISED)
SPROCKET, MULTIPLE KEYWAY CRANK SPROCKET.
CRANK SPROCKET EXC. STOCK ROLLER CAM ENGINES.
TRACK, HOT ROD, CLAIMER ENGINES.
Line
No.
25
Part Title
Part No
3pc Set
48510W-9
48510W-9
26
Description
HOT ROD, CLAIMER ENGINES.
ROD, CLAIMER ENGINES.
427 ENG - 1980-90 - 8 Cyl. - 4.250 Bore TRUCK APPLICATIONS ONLY
Oil Pump
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
SCREEN.
SHAFT AND OPTIONAL RELIEF SPRINGS. FOR 8" PANS. STREET
AND STRIP.
AND STRIP.
9" DEEP)
COMPATIBLE
CLASS IV NOTE: NOT COMPUTER COMPATIBLE. CAM LIFT INT
.356 EXH .376
.382 EXH .394
.329 EXH .341
.253
.273
83
Line
No.
26
Part Title
Part No
Camshafts Using
Hydraulic Lifters
22204
22214
22296
22302
22306
22471
Hydraulic Lifters
Camshafts Using
32100
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
Valve Spring with
Mechanical Lifters
451054
451064
451074
451084
VS-320
466154
Valve Spring with
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
Guide Plates
466164
466224
466224
473004
476104
498684
475064
475084
500624
500634
MGP1064
MGP1074
84
Description
427 ENG - 1980-90 - 8 Cyl. - 4.250 Bore TRUCK APPLICATIONS ONLY (Continued)
EXH .310
EXH .295
EXH .297
EXH .302
EXH .325
EXH .337
EXH .376
.639 EXH
EXH .336
.578 EXH
HYD. ROLLER
ZERO LASH
OF 1.88
USE WITH [22214], [22204], [22296], [22306], [22302], [22100]
REQUIRED.
LONG SLOT
3/8 DIA. EXH. MAX. SPRING PRESSURE 350 LBS.
3/8 DIA. EXH. MAX. SPRING PRESSURE 350 LBS.
STUDS. (RAISED)
STUDS. (RAISED)
Line
No.
26
Part Title
Part No
Gear Drive Set
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
48510W-9
48510W-9
27
Description
427 ENG - 1980-90 - 8 Cyl. - 4.250 Bore TRUCK APPLICATIONS ONLY (Continued)
454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore (CAR APPLICATIONS ONLY)
Oil Pump
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
SCREEN.
AND STRIP.
AND STRIP.
85
Line
No.
27
Part Title
Part No
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
22214
22296
22302
22306
22471
Hydraulic Lifters
Camshafts Using
32100
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
86
Description
454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore (CAR APPLICATIONS ONLY) (Continued)
451054
451064
451074
451084
9" DEEP)
COMPATIBLE
.356 EXH .376
.382 EXH .394
.329 EXH .341
.253
.273
EXH .310
EXH .295
EXH .297
EXH .302
EXH .325
EXH .337
EXH .376
.639 EXH
EXH .336
.578 EXH
HYD. ROLLER
ZERO LASH
Line
No.
27
Part Title
Part No
Description
454 ENG - 1970-76 - 8 Cyl. - 4.250 Bore (CAR APPLICATIONS ONLY) (Continued)
Valve Spring with
Mechanical Lifters
VS-320
466154
Valve Spring with
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
466164
466224
466224
473004
476104
498684
475064
475084
500154
500164
Guide Plates
500294
500304
MGP1064
MGP1074
Gear Drive Set
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
48510W-9
48510W-9
OF 1.88
USE WITH [22214], [22204], [22296], [22306], [22302], [22100]
REQUIRED.
LONG SLOT
PLATES
TREATED FOR GUIDE PLATES.
STUDS. (RAISED)
STUDS. (RAISED)
87
Line
No.
28
Part Title
Part No
Oil Pump
10770
10774
10775
10778
10778C
10070-800SS
10070-900SS
Screen Assy
12702
Torque Camshaft
MTC-6
CL-MTC-6
Camshafts Using
Mechanical Lifters
22396
22407
22408
22427
Camshafts Using
Hydraulic Lifters
22100
22127
22204
22214
22296
22302
22306
88
Description
454 ENG - 1970-97 - 8 Cyl. - 4.250 Bore (TRUCK APPLICATIONS ONLY)
INCLUDES I/S SHAFT W/STEEL GUIDE. WILL USE STOCK 3/4"
PRESS-IN SCREEN.
SAME AS 10777 PUMP W/O THREADED INLET.
SHAFTS EXTENDED INTO COVER FOR SUPPORT, RELIEF
VALVE HAS SCREW IN PLUG. THE DRIVE SHAFT AND
INTERMEDIATE SHAFT NOW HAVE A MALE/FEMALE HEX
CONNECTION. HAS ANTI-CAVITATION GROOVES. REQUIRES
SPECIAL SCREW IN SCREEN. RACING APPLICATIONS ONLY.
1970-1994 HI VOL ALUMINUM BILLET (25 PERCENT ADD'L VOL) PROTECTIVE ANODIZED HARDCOAT. SCREEN INTEGRATED
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT, OPTIONAL RELIEF SPRINGS. FOR 8" PANS.
STREET AND STRIP.
INTO PUMP COVER. INCLUDES STUD MOUNTING KIT, CHROMEMOLY I/S SHAFT, OPTIONAL RELIEF SPRINGS. FOR 9" PANS.
STREET AND STRIP.
1970-1994 SCREW IN SCREEN FOR [10777] PUMP. TRUCK PAN
(APPROX. 9" DEEP)
1970-1994 CLASS I NOT COMPUTER COMPATIBLE EXC. H.D.
AND HI PERF. USE VS-320 SPRING W/INSTALLED HGT. OF 1.90.
NOT COMPUTER COMPATIBLE. CAM LIFT INT .281 EXH .296
4OZ MELL LUBE. CLASS I EXC. H.D. AND HI PERF. USE WITH VS320 SPRING W/INSTALLED HGT. OF 1.90. NOT COMPUTER
COMPATIBLE
1970-1994 CLASS III NOT COMPUTER COMPATIBLE OEM
#3904362. CAM LIFT .306 INT .306 EXH
1970-1994 CLASS IV NOTE: NOT COMPUTER COMPATIBLE CAM
.234 EXH .253
.258 EXH .273
INT .295 EXH .310
INT .295 EXH .295
INT .294 EXH .297
INT .302 EXH .302
INT .311 EXH .325
Line
No.
28
Part Title
Part No
Description
454 ENG - 1970-97 - 8 Cyl. - 4.250 Bore (TRUCK APPLICATIONS ONLY) (Continued)
Camshafts Using
Hydraulic Lifters
Hydraulic Lifters
Camshafts Using
22471
32100
22297
22385
22472
22480
22485
Mell Lube
Mechanical Lifters
M-10012
298404
Hydraulic Lifters
JB-7003
298174
298184
Valves
Valve Spring with
Mechanical Lifters
299694
299704
451054
451064
451074
451084
VS-320
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466224
Valve Locks
Rocker Arms
Retainers
473004
476104
498684
475064
475084
500154
500164
Guide Plates
500294
500304
MGP1064
MGP1074
INT .329 EXH .337
4OZ MELL LUBE CLASS I NOT COMPUTER COMPATIBLE
1996-1997 CLASS II NOT COMPUTER COMPATIBLE. FOR
ENGINES EQUIPPED WITH FACTORY ROLLER. CAM LIFT .501
INT .510 EXH
INT .368 EXH .376
.639 EXH
INT .329 EXH .336
.578 EXH
1970-1990
1970-1994 MUST BE USED WITH ADJUSTABLE VALVE TRAIN SET AT ZERO LASH.
1991-1997 MUST BE USED WITH ADJUSTABLE VALVE TRAIN
1991-1997
1970-1994 HEAD DIA. 2.190 INT.
1970-1994 HEAD DIA. 1.725 EXH.
1970-1994 HEAD DIA. 2.300 INT.
1970-1994 HEAD DIA. 1.880 EXH.
1970-1994 USE WITH [22100], [MTC-2], [22106] CAMS- NOTE:
ASM. HEIGHT OF 1.88
1970-1994 OUTER- USE WITH [22427] CAM- MACHINING MAY BE
REQUIRED
1970-1994 INNER- USE WITH [22427] CAM- MACHINING MAY BE
REQUIRED
1970-1994 USE WITH [22214], [22204], [22296], [22306], [22302],
[22100] CAMS- NOTE: ASM. HEIGHT OF 1.88- MACHINING MAY
BE REQUIRED.
1970-1994 USE WITH [22396] CAM- MACHINING MAY BE
REQUIRED
1970-1994 HARDENED 3/8" STEM 2 GROOVE
1970-1994 LONG SLOT
FOR GUIDEPLATES
1970-1994 MAX. SPRING PRESSURE 350 LBS. 9.230 LENGTH HEAT TREATED FOR GUIDE PLATES.
ARM STUDS. (RAISED)
89
Line
No.
28
Part Title
Part No
Description
454 ENG - 1970-97 - 8 Cyl. - 4.250 Bore (TRUCK APPLICATIONS ONLY) (Continued)
Gear Drive Set
IRON CAM SPROCKET, MULTIPLE KEYWAY CRANK SPROCKET.
1970-1994 INCLUDES SEAMLESS SINGLE SOLID ROLLER CHAIN
(.335" ROLLER), CAST IRON CAM SPROCKET, MULTIPLE
KEYWAY CRANK SPROCKET EXC. STOCK ROLLER CAM
ENGINES.
48410
48410Q
3pc Set
40205
40401
40510
48510T-9
48510W-9
48510W-9
PERFORMANCE - CHRYSLER PRODUCTS
Engine
Year
Line
4 Cyl.
Engine
Year
Line
8 Cyl. (Continued)
Engine
Year
Line
8 Cyl. (Continued)
2.0-Y (122) DOHC
1995-99
1
5.7-H (345) OHV
2003-07
6
6.8 (413)
1959-65
12
2.0-C,F (122) SOHC
1995-05
2
5.9 (360) OHV
1971-02
7
7.0 (426) HEMI
1966-71
13
5.9 (361)
1961-64
8
7.0 (426) WEDGE
1963-65
14
7.2 (440) OHV
1966-78
15
8 Cyl.
4.5 (273)
1965-69
3
6.1-W,3 (370) OHV
2005-07
9
5.2 (318) OHV
1975-02
4
6.3 (383)
1959-71
10
5.6 (340)
1968-73
5
6.6 (400) OHV
1975-78
11
Line
No.
1
Part Title
Description
2.0-Y (122) DOHC ENG. - 1995-99 - 4Cyl. - 3.44 Bore (AVENGER, NEON, SEBRING)
Oil Pump
90
Part No
10190
HI VOL OIL PUMP. 20% ADDITIONAL VOLUME THAN STOCK
PUMP. RELIEF SPRING DESIGNED TO INCREASE INTERNAL BYPASS PRESSURE SETTING. UPGRADED MATERIALS FOR
IMPROVED PERFORMANCE AND DURABILITY. SUPPLIED WITH
ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO
STOCK SETTINGS.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)
Line
No.
2
Part Title
10190
HI VOL OIL PUMP. 20% ADDITIONAL VOLUME THAN STOCK
PUMP. RELIEF SPRING DESIGNED TO INCREASE INTERNAL BYPASS PRESSURE SETTING. UPGRADED MATERIALS FOR
IMPROVED PERFORMANCE AND DURABILITY. SUPPLIED WITH
ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO
STOCK SETTINGS.
4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore (CHARGER, CORONET, DART, FURY, ROADRUNNER,
VALIANT)
Oil Pump
Torque Camshaft
M-72HV
MTD-1
CL-MTD-1
Camshafts Using
Hydraulic Lifters
23123
23203
23301
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
299374
290114
466434
471004
474004
475144
500224
500594
3pc Set
40202
40406
4
Description
2.0-C,F (122) SOHC ENG - 1995-05 4 Cyl. - 3.45 Bore (BREEZE, CIRRUS, NEON, STRATUS)
Oil Pump
3
Part No
HI VOL PUMP (25% ADD'L VOL OF OIL)
CLASS I - NOT COMPUTER COMPATIBLE. CAM LIFT INT .278
EXH .288
KIT INCLUDES 1-[MTD-1] CAM, 16-[JB-2011] LIFTERS & 4OZ
W/INSTALLED HGT. OF 1.65 CHECK FOR COIL BIND. USE [VS1120] SPRING W/INSTALLED HGT. OF 1.65. CLASS I EXCLUDING
ROLLER LIFTERS
CLASS I NOT COMPUTER COMPATIBLE EXC. ROLLER LIFTERS.
CLASS II NOT COMPUTER COMPATIBLE EXC. ROLLER
LIFTERS. CAM LIFT INT .288 EXH .298
CLASS III NOT COMPUTER COMPATIBLE EXC. ROLLER
LIFTERS. CAM LIFT INT .287 EXH .287
USE WITH [MTD-1], [23301], [23203], [23123] CAMS - MACHINING
MAY BE REQUIRED
INTAKE
EXHAUST
1965-1967 MAX. SPRING PRESSURE 350 LBS. USE WITH
MECHANICAL LIFTERS
HYDRAULIC LIFTERS
5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore (INCLUDES VANS, TRUCKS)
Oil Pump
Torque Camshaft
M-72HV
MTD-1
CL-MTD-1
Camshafts Using
Hydraulic Lifters
23123
23203
23301
Mechanical Lifters
1975-1988 CLASS I - NOT COMPUTER COMPATIBLE. CAM LIFT
.278 INT .288 EXH
1975-1988 KIT INCLUDES 1-[MTD-1] CAM, 16-[JB-2011] LIFTERS &
W/INSTALLED HGT. OF 1.65 CHECK FOR COIL BIND. USE [VS1120] SPRING W/INSTALLED HGT. OF 1.65. CLASS I NOT
COMPUTER COMPATIBLE EXC. ROLLER LIFTERS
CAM LIFT .278 INT .278 EXH.
LIFTERS. CAM LIFT .288 INT .298 EXH
299374
91
Line
No.
4
Part Title
Part No
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
290114
466434
Retainers
471004
474004
475144
500594
3pc Set
40202
40406
5
Oil Pump
Torque Camshaft
M-72HV
MTD-1
CL-MTD-1
Camshafts Using
Hydraulic Lifters
23123
23301
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
471004
474004
475144
500594
MAY BE REQUIRED
INTAKE
EXHAUST
MAX. SPRING PRESSURE 350 LBS. USE WITH HYD. LIFTERS
10342
FEATURES: STANDARD VOLUME, HARDCOAT ANODIZED
PRESSURE W/OPTIONAL SPRINGS, CUP PLUGS REPLACED
W/THREADED FITTINGS. EXCLUDES ASPEN.
5.9 (360) OHV ENG - 1971-02 - V8 - 4.00 Bore (INCLUDES VANS, TRUCKS)
Oil Pump
Torque Camshaft
M-72HV
MTD-1
CL-MTD-1
Camshafts Using
Hydraulic Lifters
23123
92
299374
290114
466434
.288 EXH
KIT INCLUDES 1-[MTD-1] CAM, 16-[JB-2011] LIFTERS & 4OZ
W/INSTALLED HGT. OF 1.65 CHECK FOR COIL BIND. USE [VS1120] SPRING W/INSTALLWD HGT. OF 1.65. CLASS I NOT
COMPUTER COMPATIBLE. EXC. ROLLER LIFTERS
CLASS III NOT COMPUTER COMPATIBLE EXC. ROLLER
5.7-2,D,H (345) OHV ENG - 2003-07 - 8 Cyl. - 3.92 Bore (300C, MAGNUM R/T, CHARGER R/T, RAM
1500-3500, DURANGO) HEMI
Oil Pump
7
MAY BE REQUIRED
INTAKE
EXHAUST
1975-1989 MAX. SPRING PRESSURE 350 LBS. EXC. ROLLER
LIFTERS
5.6 (340) ENG - 1968-73 - V8 - 4.04 Bore (CHALLENGER, CHARGER, CORONET, DART, DUSTER,
ROADRUNNER)
23203
6
Description
5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore (INCLUDES VANS, TRUCKS) (Continued)
1971-1988 CLASS I - NOT COMPUTER COMPATIBLE. CAM LIFT
.278 INT .288 EXH
W/INSTALLED HGT. OF 1.65 CLASS I EXC. ROLLER LIFTERS NOT COMPUTER COMPATIBLE
Line
No.
7
Part Title
Part No
Camshafts Using
Hydraulic Lifters
23203
23301
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
299374
290114
466434
Retainers
471004
474004
475144
500594
3pc Set
40202
40406
8
Description
5.9 (360) OHV ENG - 1971-02 - V8 - 4.00 Bore (INCLUDES VANS, TRUCKS) (Continued)
USE WITH [MTD-1], [23301], [23203] & [23123] CAMS- MACHINING
MAY BE REQUIRED
INTAKE
EXHAUST
1971-1988 MAX. SPRING PRESSURE 350 LBS. USE WITH HYD.
LIFTERS
5.9 (361) ENG - 1961-64 - V8 - 4.125 Bore
Oil Pump
Torque Camshaft
Camshafts Using
Hydraulic Lifters
M-63HP
M-63HV
MTD-2
23204
23302
23401
Hydraulic Lifters
33103
Mechanical Lifters
Valve Spring with
Mechanical Lifters
299374
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
Retainers
3pc Set
471004
474004
475094
475144
40203
40407
HI PRESSURE
CLASS I - NOT COMPUTER COMPATIBLE. SINGLE BOLT CAM.
CLASS II NOT COMPUTER COMPATIBLE. SINGLE BOLT CAM.
CLASS III NOT COMPUTER COMPATIBLE. SINGLE BOLT CAM.
CLASS IV NOT COMPUTER COMPATIBLE. SINGLE BOLT CAM.
KIT INCLUDES 1-[23102] CAM, 16-[29812] LIFTER & 4OZ MELL
LUBE CLASS I - NOT COMPUTER COMPATIBLE. SINGLE BOLT
CAM.CAM LIFT
OUTER - USE WITH STOCK CAMS - MACHINING MAY BE
REQUIRED
INNER - USE WITH STOCK CAMS - MACHINING MAY BE
REQUIRED
USE WITH [23302] & [23204] CAMS - NOTE: ASM. HEIGHT OF
1.80-MACHINING MAY BE REQUIRED
USE WITH [MTD-2] CAM - NOTE: ASM. HEIGHT OF 1.80MACHINING MAY BE REQUIRED
INTAKE
EXHAUST
INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM
93
Line
No.
9
Part Title
10342
Torque Camshaft
M-63HP
M-63HV
MTD-2
CL-MTD-2
Camshafts Using
Hydraulic Lifters
23204
23302
23401
Hydraulic Lifters
33103
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Mechanical Lifters
299374
299764
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
471004
474004
475094
475144
500384
3pc Set
40203
Retainers
40407
HI PRESSURE
KIT INCLUDES 1-[MTD-2] CAM, 16-[JB-976] LIFTERS & 4OZ MELL
W/INSTALLED HGT. OF 1.86 CLASS I - NOT COMPUTER
COMPATIBLE. SINGLE BOLT CAM
CAM
1968-1971
REQUIRED
REQUIRED
USE WITH [23302] & [23204] CAMS - NOTE: ASM HEIGHT OF 1.80MACHINING MAY BE REQUIRED
INTAKE
EXHAUST
1961-1971 MAX. SPRING PRESSURE 350 LBS. LOW BLOCK
ENGINE - USE WITH MECHANICAL LIFTERS
6.6 (400) OHV ENG - 1975-78 - V8 - 4.34 Bore
Oil Pump
Camshaft
Camshafts Using
Hydraulic Lifters
M-63HP
M-63HV
MTD-2
23204
23302
94
FEATURES: STANDARD VOLUME, HARDCOAT ANODIZED
PRESSURE W/OPTIONAL SPRINGS, CUP PLUGS REPLACED
W/THREADED FITTINGS.
6.3 (383) ENG - 1959-71 - V8 - 4.250 Bore
Oil Pump
11
Description
6.1-W,3 (370) OHV ENG - 2005-07 - 8 Cyl. - 4.06 Bore (MAGNUM SRT8, CHARGER SRT8, 300
CSRT8) HEMI
Oil Pump
10
Part No
HI PRESSURE
Line
No.
11
Part Title
Part No
Camshafts Using
Hydraulic Lifters
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Mechanical Lifters
23401
299374
299764
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
Retainers
3pc Set
471004
474004
475094
475144
40203
40407
12
Description
REQUIRED
REQUIRED
1.80- MACHINING MAY BE REQUIRED
INTAKE
EXHAUST
CHROME - USE WITH [466154] & [466224] SPRINGS
CHROME - USE WITH [466434] SPRINGS
6.8 (413) ENG - 1959-65 - 8 Cyl. - 4.1876 Bore
Oil Pump
Torque Camshaft
Camshafts Using
Hydraulic Lifters
M-63HP
M-63HV
MTD-2
23204
23302
23401
Hydraulic Lifters
33103
Mechanical Lifters
Valve Spring with
Mechanical Lifters
299374
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
Retainers
3pc Set
471004
474004
475094
475144
40203
40407
HI PRESSURE
CAM.CAM LIFT
REQUIRED
REQUIRED
1.80- MACHINING MAY BE REQUIRED
INTAKE
EXHAUST
95
Line
No.
13
Part Title
Retainers
3pc Set
M-63HP
M-63HV
475224
500364
500374
40217
Torque Camshaft
Camshafts Using
Hydraulic Lifters
M-63HP
M-63HV
MTD-2
23204
23302
23401
Hydraulic Lifters
33103
Mechanical Lifters
Valve Spring with
Mechanical Lifters
299374
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
Retainers
3pc Set
471004
474004
475094
475144
500194
500474
40203
40217
40407
1970-1971 MAX. SPRING PRESSURE 350 LBS. INTAKE
1970-1971 MAX. SPRING PRESSURE 350 LBS EXHAUST
INCLUDES DOULBLE ROLLER CHAIN, STEEL 3 BOLT CAM
HI PRESSURE
LUBE CLASS I NOT COMPUTER COMPATIBLE. SINGLE BOLT
CAM
OUTER- USE WITH STOCK CAMS- MACHINING MAY BE
REQUIRED
INNER- USE WITH STOCK CAMS- MACHINING MAY BE
REQUIRED
USE WITH [23302] & [23204] CAMS- NOTE: ASM. HEIGHT OF 1.80MACHINING MAY BE REQUIRED
USE WITH [MTD-2] CAM- NOTE: ASM. HEIGHT OF 1.80MACHINING MAY BE REQUIRED
INTAKE
EXHAUST
1963 MAX. SPRING PRESSURE 350 LBS. USE W/MECH. LIFTERS
1964 MAX. SPRING PRESSURE 350 LBS. USE W/MECH. LIFTERS
7.2 (440) OHV ENG - 1966-78 - V8 - 4.320 Bore
Oil Pump
Torque Camshaft
M-63HP
M-63HV
MTD-2
CL-MTD-2
Camshafts Using
Hydraulic Lifters
23204
96
HI PRESSURE
7.0 (426) WEDGE ENG - 1963-65 - 8 Cyl. - 4.25 Bore
Oil Pump
15
Description
7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4.250 Bore
Oil Pump
14
Part No
HI PRESSURE
COMPATIBLE. SINGLE BOLT CAM
Line
No.
15
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
23302
23401
Hydraulic Lifters
33103
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Mechanical Lifters
299374
299764
466154
466164
Valve Spring with
Hydraulic Lifters
466224
466434
Valve Locks
Retainers
471004
474004
475094
475144
500334
500354
500474
500544
3pc Set
40203
40217
40407
1966-1967 KIT INCLUDES 1-[23102] CAM, 16-[29812] LIFTER &
4OZ MELL LUBE CLASS I NOT COMPUTER COMPATIBLE.
SINGLE BOLT CAM
1968-1978
OUTER- USE WITH STOCK CAMS- MACHINING MAY BE
REQUIRED
INNER- USE WITH STOCK CAMS- MACHINING MAY BE
REQUIRED
USE WITH [23302] & [23204] CAMS- NOTE: ASM. HEIGHT OF 1.80MACHINING MAY BE REQUIRED
USE WITH [MTD-2] CAM- NOTE: ASM. HEIGHT OF 1.80MACHINING MAY BE REQUIRED
INT.
EXH.
1968-1978 MAX. SPRING PRESSURE 350 LBS 440 ENG. USE
W/HYD. LIFTERS- EXC. 440 RAISED WEDGE ENG
1968-1978 MAX. SPRING PRESSURE 350 LBS 440 ENG. USE
W/MECH. LIFTERS- EXC. 440 RAISED WEDGE ENG
MECHANICAL LIFTERS - W/440 RAISED WEDGE ENGINE
1968-1978 MAX. SPRING PRESSURE 350 LBS. 440 ENG. USE
W/HYD. LIFTERS- W/440 RAISED WEDGE ENG
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET SINGLE
BOLT CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET 440 ENG.
ONLY- 3 BOLT CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET SINGLE
BOLT CAM
PERFORMANCE - FORD PRODUCTS & TRUCKS
Engine
Year
Line
8 Cyl.
Engine
Year
Line
Engine
8 Cyl. (Continued)
Year
Line
8 Cyl. (Continued)
255
1980-82
1
351W
1969-97
7
400
1971-82
13
260
1962-64
2
351C
1970-74
8
406
1962-63
14
4.6 (281) DOHC
1996-04
3
351M
1975-81
9
427
1963-68
15
4.6-X (281) SOHC
1996-04
4
352
1958-67
10
428
1966-70
16
289
1963-68
5
360
1968-76
11
429
1968-73
17
302
1968-01
6
390
1961-76
12
460
1972-97
18
Line
No.
1
Part Title
Part No
Description
255 ENG - 1980-82 - 8 Cyl. - 3.680 Bore (INCLUDES MERCURY)
Mell Lube
M-10012
97
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)
Line
No.
1
Part Title
48551T-9
WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST
BEARINGS. RECOMMENDED FOR STREET ANS STRIP, CIRCLE
TRACK, HOT ROD, CLAIMER ENGINES
Oil Pump
M-68HV
10687
10688
Torque Camshaft
MTF-1
CL-MTF-1
Camshafts Using
Hydraulic Lifters
24108
24203
24210
24212
24301
24305
Mell Lube
Mechanical Lifters
Hydraulic Lifters
M-10012
299144
JB-2205
299004
299014
Valves
451094
451104
451114
451124
466114
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
466274
466124
466134
466444
98
Description
255 ENG - 1980-82 - 8 Cyl. - 3.680 Bore (INCLUDES MERCURY) (Continued)
3pc Set
2
Part No
HI VOL PUMP (25% ADD'L VOL OF OIL) MAY REQUIRE OIL PAN
MODIFICATION.
EXTENDED INTO BOTTOM COVER FOR SUPPORT. RELIEF
VALVE CUP PLUG, REPLACED BY SCREW IN PLUG. INCLUDES
I/S SHAFT. MAY REQUIRE MINOR OIL PAN MODIFICATION.
CLASS I NOT COMPUTER COMPATIBLE. EXCLUDES ROLLER
KIT INCLUDES 1-[MTF-1] CAM, 16-[JB-900] LIFTERS & 4OZ MELL
COMPATIBLE. EXCLUDES ROLLER LIFTERS
LIFTERS. CAM LIFT .257 INT. EXHUAST LIFT NOT AVAILABLE
EXH
EXH
EXH
.320 EXH
.325 EXH
HYD. ROLLER
EXC. ROLLER
MUST BE USED WITH ADJUSTABLE VALVE TRAIN SET AT ZERO
LASH. EXC. ROLLER.
OUTER - USE WITH [24409] CAM. MACHINING MAY BE
REQUIRED
INNER - USE WITH [24409] CAM. MACHINING MAY BE REQUIRED
INNER - USE WITH [24210], [24212], [24301], [24203], [MTF-1]
CAMS. NOTE: ASM. HEIGHT OF 1.80. MACHINING MAY BE
REQUIRED
OUTER - USE WITH [24210], [24212], [24301], [24203], [MTF-1]
REQUIRED
USE WITH [24210], [24212], [24301], [24203], [MTF-1], [MTF-5]
REQUIRED
Line
No.
2
Part Title
Part No
Valve Locks
Retainers
Guide Plates
472004
475054
475074
500404
500584
MGP1084
MGP1094
3pc Set
40206
40402
3
4
MAX. SPRING PRESSURE 350 LBS. . HEAT TREATED
FLAT-5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER
ARM STUDS
ARM STUDS
SET INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON
CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET.
MUST USE MF126 (3.356") THRUST PLATE WITH THIS SET. DO
NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402]
SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE
ONE PIECE ECCENTRIC FORD PT # C3AZ6287B. NOT FOR USE
WITH ROLLER CAMS
4.6 (281) DOHC ENG - 1996-04 - V8 - 3.550 Bore (MUSTANG SVT COBRA, MACH 1) 32V
Oil Pump
10227
Mell Lube
M-10012
STANDARD VOLUME. INCLUDES 130,000 TSI TENSILE
STRENGTH BILLET STEEL ROTORS, ANODIZED HARD COATED
BODY AND MAG PHOSPHATE COATED COVER. USES 335S
15/16" SCREEN
4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.550 Bore (MUSTANG GT) 16V
Oil Pump
10176
10227
Mell Lube
5
Description
STANDARD VOLUME. INCLUDES 130,000 TSI TENSILE
STRENGTH BILLET STEEL ROTORS, ANODIZED HARD COATED
BODY AND MAG PHOSPHATE COATED COVER.
HIGH VOLUME 8% OVER STANDARD VOLUME. INCLUDES
130,000 TSI TENSILE STRENGTH BILLET STEEL ROTORS,
ANODIZED HARD COATED BODY AND MAG PHOSPHATE
COATED COVER. USES 335S 15/16" SCREEN
M-10012
Oil Pump
M-68HV
10687
10688
Torque Camshaft
MTF-1
CL-MTF-1
Camshafts Using
Hydraulic Lifters
24108
24203
24210
MODIFICATION.
COMPATIBLE. EXCLUDES ROLLER LIFTERS
LIFTERS. CAM LIFT .257 INT. EXHUAST LIFT NOT AVAILABLE
EXH
EXH
99
Line
No.
5
Part Title
Part No
Camshafts Using
Hydraulic Lifters
24212
24301
24305
Mell Lube
Mechanical Lifters
Hydraulic Lifters
M-10012
299144
JB-2205
299004
299014
Valves
451094
451104
451114
451124
466114
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
466274
466124
466134
466444
Valve Locks
Retainers
Guide Plates
472004
475054
475074
500584
MGP1084
MGP1094
Gear Drive Set
48420
3pc Set
40206
40402
48520T-9
100
Description
EXH
.320 EXH
.325 EXH
HYD. ROLLER
EXC. ROLLER
LASH. EXC. ROLLER.
REQUIRED
REQUIRED
REQUIRED
USE WITH [24210], [24212], [24301], [24203], [MTF-1], [MTF-5]
REQUIRED
ARM STUDS
ARM STUDS
INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM
BUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED WITH 5
OPTIONAL COLOER CODED DOWEL PIN HOLE INSERTS. LATE
1965 CAR APPLICATIONS USE 1/4" THRUST PLATE. TRUCK
APPLICATIONS: SPACER CAST INTO HUB. OLDER ENGINES
DISCARD SEPERATE CAMSHAFT SPACER.
SET INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON
CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET.
MUST USE MF126 (3.356") THRUST PLATE WITH THIS SET. DO
NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402]
SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE
ONE PIECE ECCENTRIC FORD PT # C3AZ6287B.
WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST
BEARINGS. LATE 1965 USE 1/4" THRUST PLATE
Line
No.
5
Part Title
Description
3pc Set
6
Part No
48520W-9
WITH +4¦/-4¦ CAM ADJUSTMENT. BRONZE WASHER LATE 1965
USE 1/4" THRUST PLATE
302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore (INCLUDES MERCURY AND LINCOLN)
Oil Pump
M-68HV
10687
10688
Torque Camshaft
MTF-5
CL-MTF-5
Camshafts Using
Hydraulic Lifters
24108
24203
24212
24301
24305
Camshafts Using
24226
24227
24280
Mell Lube
Mechanical Lifters
Hydraulic Lifters
M-10012
299144
JB-2205
299004
299014
Valves
451094
451104
451114
MODIFICATION.
1968-1985 CLASS I NOT COMPUTER COMPATIBLE. FOR 302 H/O
ENGINE. EXC. ROLLER LIFTERS. CAM LIFT .280 INT .295 EXH
1982-1985 KIT INCLUDES 1-[MTF-5] CAM, 16-[JB-900] LIFTERS &
W/INSTALLED HGT. OF 1.82 W/[47505] RETAINERS, OR USE
INTAKE SPRINGS W/STOCK FORD INTAKE RETAINERS IN
PLACE OF STOCK EXHAUST SPRINGS AND ROTATING RET
CLASS I NOT COMPUTER COMPATIBLE. FOR 302 H/O ENGINE.
EXC. ROLLER LIFTERS
1968-1985 CLASS I NOT COMPUTER COMPATIBLE. EXCLUDES
302 H/O ENGINE AND ROLLER LIFTERS. CAM LIFT .257 INT.
EXHUAST LIFT NOT AVAILABLE
1968-1985 CLASS II NOT COMPUTER COMPATIBLE. WHEN
INSTALLING IN THE 302 H/O USE FIRING ORDER (15426378).
1968-1985 CLASS II NOT COMPUTER COMPATIBLE. WHEN
1968-1985 CLASS III NOT COMPUTER COMPATIBLE. WHEN
.325 INT .325 EXH
1985-1995 CLASS II NOT COMPUTER COMPATIBLE. FOR H/O
ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. USE
FIRING ORDER 13726548. CAM LIFT .307 INT .318 EXH
ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. USE
FIRING ORDER (13726548). CAM LIFT .318 INT .332 EXH
ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. CAM
1968
HYD. ROLLER
1968-1992 EXC. ROLLER
1968-1992 MUST BE USED WITH ADJUSTABLE VALVE TRAIN
SET AT ZERO LASH. EXC. ROLLER.
101
Line
No.
6
Part Title
Part No
Valves
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
451124
466114
466274
466124
466134
466444
Valve Locks
Retainers
472004
475054
475074
500414
500444
Guide Plates
500584
MGP1084
MGP1094
Gear Drive Set
48420
48420
3pc Set
40206
48520T-9
48520W-9
102
Description
302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore (INCLUDES MERCURY AND LINCOLN) (Continued)
REQUIRED
REQUIRED
REQUIRED
USE WITH [24210], [24212], [24301], [24203], [MTF-1], [MTF-5]
REQUIRED
1969-1970 MAX. SPRING PRESSURE 350 LBS. HEAT TREATED.
302 BOSS
1971-1972 MAX. SPRING PRESSURE 350 LBS. HEAT TREATED.
302 BOSS
1968-1969 MAX. SPRING PRESSURE 350 LBS. TO CHANGE L4
ARM STUDS
ARM STUDS
ROLLER CAM BUTTON, LOCK PLATE AND BOLTS, TIMING
ADJUSTED WITH 5 OPTIONAL COLOER CODED DOWEL PIN
HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP,
CLAIMER AND RACING ENGINES UP TO 6,500 RPM. 89-94
W/ROLLER CHAIN, 94-95 W/SILENT CHAIN. 68-72 USE STAND.
1/4" THRUST PLATE. SPACER CAST INTO SPROCKET HUB,
OLDER ENGINES DISCARD SEPERATE CAM SPACER. CAR
APPLICATIONS ONLY.
CLAIMER AND RACING ENGINES UP TO 6,500 RPM. SPACER
CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD
SEPERATE CAMSHAFT SPACER. TRUCK APPLICATIONS ONLY.
1968-1994 INCLUDES ROLLER CHAIN, CAST IRON CAM
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET CAR AND
TRUCK APPLICATIONS
SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER
THRUST BEARINGS. CAR AND TRUCK APPLICATIONS. CAR
APPLICATIONS USE 1/4" THRUST PLATE.
SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. BRONZE WASHER
CAR AND TRUCK APPLICATIONS. CAR APPLICATIONS USE 1/4"
THRUST PLATE.
Line
No.
6
Part Title
Part No
3pc Set
48551T-9
48551T-9
7
Description
THRUST BEARINGS. RECOMMENDED FOR STREET AND STRIP,
CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 1989-94 WITH
ROLLER TYPE CHAIN, 1994-95 WITH SILENT TYPE CHAIN. 80-88
H/O CAR APPLICATIONS ONLY. SPACER CAST INTO SPROCKET
HUB. OLDER ENGINES DISCARD SEPERATE CAMSHAFT
SPACER.
CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 1989-90 WITH
ROLLER TYPE CHAIN, 1994-01 WITH SILENT TYPE CHAIN.
SPACER CAST INTO SPROCKET HUB OLDER ENGINES
DISCARD SEPERATE CAMSHAFT SPACER. TRUCK
APPLICATIONS ONLY.
351W ENG - 1969-97 - 8 Cyl. - 4.000 Bore 351 WINDSOR (INCLUDES MERCURY AND LINCOLN)
Oil Pump
M-83HV
10832
10833
Torque Camshaft
MTF-5
Camshafts Using
Hydraulic Lifters
24108
24211
24225
24305
Hydraulic Lifters
Hydraulic Lifters
Valves
34211
JB-2205
299004
299014
451094
451104
451114
451124
451154
HI VOLUME PUMP (25% ADD'L VOLUME OF OIL) STOCK RELIEF
VALVE AND SHAFT DESIGN - MAY REQUIRE MINOR OIL PAN
MODIFICATION.
STANDARD VOLUME. PERFORMANCE VALVE AND SHAFT
DESIGN. SHAFTS EXTENDED INTO BOTTOM COVER FOR
ADDITIONAL SUPPORT. RELIEF VALVE CUP PLUG REPLACED
BY SCREW IN PLUG. INCLUDES I/S SHAFT. MAY REQUIRE
MINOR OIL PAN MODIFICATION.
HI VOLUME PUMP (25% ADD'L VOLUME OF OIL)
PERFORMANCE VALVE AND SHAFT DESIGN. SHAFTS
VALVE CUP PLUG REPLACED BY SCREW IN PLUG. INCLUDES
.280 INT .295 EXH
CLASS I NOT COMPUTER COMPATIBLE USE 302 FIRING
ORDER- 15426378. CAM LIFT .257 INT EXH NOT LISTED
EXH
EXH
CLASS III NOT COMPUTER COMPATIBLE USE 302 FIRING
ORDER 15426378. CAM LIFT .325 INT .325 EXH
KIT INCLUDES [24211] CAM, 16-[29900] LIFTERS & 4OZ MELL
LUBE. CLASS II NOT COMPUTER COMPATIBLE
HYD. ROLLER
LASH
103
Line
No.
7
Part Title
Part No
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
466174
476104
475054
500394
500664
Guide Plates
MGP1084
MGP1094
Gear Drive Set
48420
3pc Set
40206
40402
48520T-9
48520W-9
104
Description
(Continued)
USE WITH [24225] & [MTF-5] CAMS- MACHINING MAY BE
REQUIRED
HARDENED
CHROME MOLY- USE WITH [466174] SPRINGS
1969-1978 MAX. SPRING PRESSURE 350 LBS. USE WITH CAST
IRON ROCKER ARMS- HEAT TREATED
1978-1994 MAX. SPRING PRESSURE 350 LBS. USE W/STAMPED
STEEL ROCKER ARMS- HEAT TREATED
ARM STUDS
ARM STUDS
CLAIMER, RACING ENGINES UP TO 6,500 RPM. 1980-91 POLICE
WITH ROLLER TYPE CHAIN. 1972 USE STANDARD 1/4" THRUST
PLATE. SPACER CAST INTO HUB, OLDER ENGINES DISCARD
SEPERATE CAMSHAFT SPACER. CAR APPLICATIONS ONLY.
1969-1996 SET INCLUDES SEAMLESS SOLID ROLLER CHAIN,
CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK
SPROCKET. MUST USE MF126 (3.356") THRUST PLATE WITH
THIS SET. DO NOT USE TWO PIECE FUEL PUMP ECCENTRIC
WITH [40402] SET. IF ENGINE HAS TWO PIECE ECCENTRIC
DISCARD & USE ONE PIECE ECCENTRIC FORD PT #
C3AZ6287B. YOU MUST USE [MF126] (3.356"L) THRUST PLATE
RATHER THAN [MF125] OR STOCK (3.882"L) PLATE. NOT FOR
ROLLER CAMS
THRUST BEARINGS. EARLY 1972 USE STANDARD 1/4" THRUST
PLATE. SPACER CAST INTO SPROCKET HUB, OLDER ENGINES
DISCARD SEPERATE CAMSHAFT SPACER. RECOMMENDED
FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER
ENGINES. CAR APPLICATIONS ONLY
SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. BRONZE WASHER
EARLY 1972 USE STANDARD 1/4" THRUST PLATE. SPACER
CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD
SEPERATE CAMSHAFT SPACER. RECOMMENDED FOR STREET
AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. CAR
APPLICATIONS ONLY
Line
No.
7
Part Title
Part No
3pc Set
48551T-9
48551T-9
8
Description
(Continued)
CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 5.8-G 87-89, HO
87-89 POLICE WITH ROLLER TYPE CHAIN. CAR APPLICATIONS
ONLY.
CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. (94-97 WITH
SILENT TYPE CHAIN, 84-86 4BBL) TRUCK APPLICATIONS ONLY.
351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore 351 CLEVELAND (INCLUDES MERCURY AND LINCOLN)
Oil Pump
Torque Camshaft
M-84AHV
MTF-2
CL-MTF-2
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
24401
24111
24204
24224
24303
Mell Lube
Hydraulic Lifters
Valves
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
Guide Plates
M-10012
299004
299014
451134
451144
466154
466164
466224
476104
475114
500424
500434
MGP1104
MGP1114
EXH
COMPATIBLE
.341 EXH
EXH
EXH
EXH
EXH
LASH
REQUIRED
USE WITH [24204], [MTF-2], [24224] CAMS. MACHINING MAY BE
REQUIRED
HARDENED
MAX. SPRING PRESSURE 350 LBS. HEAT TREATED EXC. BOSS
MAX. SPRING PRESSURE 350 LBS. HEAT TREATED - BOSS
RAISED-3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER
ARM STUDS
ARM STUDS
105
Line
No.
8
Part Title
40405
Oil Pump
Torque Camshaft
M-84AHV
MTF-2
CL-MTF-2
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
24401
24111
24224
24303
Mell Lube
Hydraulic Lifters
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
299004
299014
466154
466164
466224
476104
475054
475054
475064
475064
Guide Plates
MGP1104
MGP1114
3pc Set
40405
EXH
COMPATIBLE
.341 EXH
EXH
EXH
EXH
EXH
LASH
REQUIRED
REQUIRED
HARDENED
1978 EXHAUST ONLY. CHROME MOLY. USE WITH [466154],
[466164] SPRINGS
1979 INTAKE AND EXHAUST. CHROME MOLY. USE WITH
[466154], [466164] SPRINGS
1975-1977 INTAKE AND EXHAUST. CHROME MOLY. USE WITH
[466154], [466164] SPRINGS
1978 INTAKE ONLY. CHROME MOLY. USE WITH [466154],
[466164] SPRINGS
ARM STUDS
ARM STUDS
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET NOT FOR
USE WITH ROLLER CAMS
Oil Pump
Torque Camshaft
106
351M ENG - 1975-81 - 8 Cyl. - 4.000 Bore 351 MODIFIED (INCLUDES MERCURY AND LINCOLN)
24204
10
Description
351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore 351 CLEVELAND (INCLUDES MERCURY AND LINCOLN)
(Continued)
3pc Set
9
Part No
M-57HV
MTF-4
.280 INT .295 EXH
Line
No.
10
Part Title
Part No
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24218
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
298724
290834
466224
473004
475084
500064
500074
3pc Set
40204
40204
40410
40410
11
Description
1963-1967 KIT INCLUDES 1-[MTF-4] CAM, 16-[JB-2083] LIFTERS &
COMPATIBLE
.295 INT .310 EXH
.292 INT .292 EXH
.320 INT .320 EXH
USE WITH [24205], [24302], [MTF-4] CAMS. MACHINING MAY BE
REQUIRED
HARDENED 2 GROOVES
CHROME MOLY - USE WITH [466154], [466224] SPRINGS
MAX.SPRING PRESSURE 350 LBS. FOR USE WITH
MECHANICAL LIFTERS
MAX. SPRING PRESSURE 350 LBS. WITH DEEP SHELL TYPE FOR USE WITH MECHANICAL LIFTERS
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET CAR
APPLICATIONS ONLY
SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET TRUCK
APPLICATIONS ONLY
CAR APPLICATIONS ONLY
360 ENG - 1968-76 - 8 Cyl. - 4.050 Bore BIG BLOCK
Oil Pump
Torque Camshaft
M-57HV
MTF-4
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24218
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
M-10012
298724
290834
466224
473004
EXH
KIT INCLUDES 1-[MTF-4] CAM, 16-[JB-2083] LIFTERS & 4OZ
COMPATIBLE
EXH
EXH
.320 EXH
REQUIRED
HARDENED 2 GROOVES
107
Line
No.
11
Part Title
Part No
Retainers
475084
500064
500074
3pc Set
40204
40410
12
Oil Pump
Torque Camshaft
M-57HV
MTF-4
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
298724
290834
466224
473004
475084
500064
500074
3pc Set
40204
40410
EXH
COMPATIBLE
EXH
EXH
.320 EXH
REQUIRED
HARDENED 2 GROOVES
MECHANICAL LIFTERS
Oil Pump
Torque Camshaft
M-84AHV
MTF-2
CL-MTF-2
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
24401
24111
24204
108
MECHANICAL LIFTERS
24218
13
Description
360 ENG - 1968-76 - 8 Cyl. - 4.050 Bore BIG BLOCK (Continued)
EXH
COMPATIBLE
.341 EXH
EXH
EXH
Line
No.
13
Part Title
Part No
Camshafts Using
Hydraulic Lifters
24224
24303
Mell Lube
Hydraulic Lifters
Valve Spring with
Mechanical Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
299004
299014
466154
466164
466224
472004
476704
475054
475054
475064
475064
3pc Set
14
Description
40405
EXH
EXH
LASH
REQUIRED
REQUIRED
1978-1979 EXH.
1978-1979 INT.
1978 EXHAUST ONLY. CHROME MOLY. USE WITH [466154],
[466164] SPRINGS
1979 INTAKE AND EXHAUST. CHROME MOLY. USE WITH
[466154], [466164] SPRINGS
1975-1977 INTAKE AND EXHAUST. CHROME MOLY. USE WITH
[466154], [466164] SPRINGS
1978 INTAKE ONLY. CHROME MOLY. USE WITH [466154],
[466164] SPRINGS
406 ENG - 1962-63 - 8 Cyl. - 4.130 Bore
Oil Pump
Torque Camshaft
M-57HP
MTF-4
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24218
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
298724
290834
466224
473004
475084
500064
500074
3pc Set
40204
EXH
COMPATIBLE
EXH
EXH
.320 EXH
REQUIRED
HARDENED 2 GROOVES
MECHANICAL LIFTERS
1963 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET &
109
Line
No.
14
Part Title
40410
Oil Pump
Torque Camshaft
M-57HP
MTF-4
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
M-10012
298724
290834
466224
473004
475084
500064
500074
3pc Set
40204
40410
EXH
COMPATIBLE
EXH
EXH
.320 EXH
REQUIRED
HARDENED 2 GROOVES
MECHANICAL LIFTERS
Oil Pump
M-57B
M-57HV
Torque Camshaft
MTF-4
CL-MTF-4
Camshafts Using
Hydraulic Lifters
24205
24218
24302
Mell Lube
Mechanical Lifters
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
Valve Locks
110
1963 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON
CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
24218
16
Description
406 ENG - 1962-63 - 8 Cyl. - 4.130 Bore (Continued)
3pc Set
15
Part No
M-10012
298724
290834
466224
473004
1968-1970 COBRA JET AND SUPER COBRA JET
HI VOL PUMP (25% ADD'L VOL OF OIL) EXCLUDES COBRA JET
AND SUPER COBRA JET
EXH
COMPATIBLE
EXH
EXH
.320 EXH
REQUIRED
HARDENED 2 GROOVES
Line
No.
16
Part Title
Part No
Retainers
475084
500064
500074
3pc Set
40204
40410
17
Description
MECHANICAL LIFTERS
429 ENG- 1968-73 - 8 Cyl. - 4.360 Bore (INCLUDES MERCURY AND LINCOLN)
Torque Camshaft
MTF-3
CL-MTF-3
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
24406
24206
24207
Hydraulic Lifters
Mell Lube
Hydraulic Lifters
Valves
Valve Spring with
Hydraulic Lifters
Guide Plates
34206
M-10012
JB-900
299004
299014
451194
451204
VS-280
MGP1124
MGP1134
Gear Drive Set
48430
3pc Set
40403
48530T-9
EXH
COMPATIBLE
.355 EXH
EXH
EXH
FOR USE WITH MTF-3 CAMSHAFT
LASH
ARM STUDS
ARM STUDS
ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. ADJUST WITH
OPTIONAL 5 COLOR CODED DOWEL PIN HOLE INSERTS.
ENGINES UP TO 6,500 RPM. STANDARD 429. SPACER CAST
INTO SPROCKET HUB. OLDER ENGINES DISCARD SEPERATE
CAMSHAFT SPACER
CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES
111
Line
No.
18
Part Title
Part No
Description
Torque Camshaft
MTF-3
CL-MTF-3
Camshafts Using
Mechanical Lifters
Camshafts Using
Hydraulic Lifters
24406
24206
24207
Hydraulic Lifters
Mell Lube
Hydraulic Lifters
Valves
34206
M-10012
JB-900
299004
299014
451194
451204
VS-280
Valve Spring with
Hydraulic Lifters
Guide Plates
MGP1124
MGP1134
3pc Set
40403
48530T-9
EXH
COMPATIBLE
.355 EXH
EXH
EXH
LASH
ARM STUDS
ARM STUDS
CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES
PERFORMANCE - ISUZU
Engine
Year
Line
Engine
8 Cyl.
Line
No.
1
Part Title
Part No
Line
Engine
Year
Line
2003-06
1
8 Cyl. (Continued)
Description
5.3-M,P (323) OHV ENG - (2003-06) - 8 Cyl. - 96mm Bore (ASCENDER) GM VORTEC
Oil Pump
10295
10296
112
Year
2003-2004 HI PRESSURE PUMP (10% MORE PRESSURE) HI
PRESSURE PUMP (10% MORE PRESSURE)
FEATURES: HIGH PRESSURE RELIEF SPRING SUPPLIED. HI
VOL PUMP (18% MORE VOLUME OF OIL) HIGH PRESSURE
RELIEF SPRING SUPPLIED
PERFORMANCE - OLDSMOBILE
Engine
Year
Line
6, 8 Cyl.
Engine
Year
Line
8 Cyl. (Continued)
260
1975-82
1
8 Cyl.
1980-88
4
425
1965-67
8
1968-80
5
455
1968-76
9
2
400
1965-69
6
305
1977-87
3
403
1977-79
7
1
Part No
Description
260 ENG - 1975-82 - 8 Cyl. - 3.500 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
Hydraulic Lifters
25309
25310
35309
35310
Mell Lube
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
M-10012
299514
466124
466134
Valve Locks
Retainers
3pc Set
2
Line
350
1981-82
Part Title
Year
307
267
Line
No.
Engine
8 Cyl. (Continued)
476104
475054
40409
HI VOL PUMP (20% ADD'L VOL OF OIL) NOTE: THIS HI VOL
PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A
CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN
CAN BE USED.
EXH
KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL
COMPATIBLE
EXH
CLASS II NOT COMPUTER COMPATIBLE. CAM LIFT NOT LISTED
LUBE CLASS III NOT COMPUTER COMPATIBLE
INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS MACHING MAY BE REQUIRED
11/32" STEM
267 ENG - 1981-82 - 8 Cyl. - 3.500 Bore
Gear Set
48400Q
Mell Lube
Gear Drive Set
M-10012
48400
3pc Set
48500T-9
113
PERFORMANCE - OLDSMOBILE (Continued)
Line
No.
2
Part Title
48500W-9
M-10012
48400
48400Q
3pc Set
48500T-9
48500W-9
ROD AND CLAIMER ENGINES
307 ENG - 1980-88 - 8 Cyl. - 3.500 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
25309
25310
Hydraulic Lifters
35309
35310
Mell Lube
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
114
305 ENG - 1977-88 - 8 Cyl. - 3.736 Bore
Mell Lube
Gear Drive Set
4
Description
3pc Set
3
Part No
M-10012
299514
466124
CAN BE USED.
.280 INT .295 EXH
1980-1984 KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS &
COMPATIBLE
.295 INT .310 EXH
NOT LISTED
NOT LISTED
4OZ MELL LUBE CLASS III NOT COMPUTER COMPATIBLE
1980-1984
Line
No.
4
Part Title
Description
Valve Spring with
Hydraulic Lifters
Valve Locks
Retainers
5
Part No
466134
476104
475054
OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS MACHING MAY BE REQUIRED
11/32" STEM
350 ENG - 1968-80 - 8 Cyl. - 4.057 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
Hydraulic Lifters
25309
25310
35309
35310
Mell Lube
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
M-10012
299514
299524
466124
466134
Valve Locks
Retainers
Gear Drive Set
476104
475054
48400
48400Q
3pc Set
48500T-9
48500W-9
CAN BE USED.
EXH
COMPATIBLE
EXH
CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT NOT LISTED
LASH
11/32" STEM
AND RACING ENGINES UP TO 6,500 RPM.
AND RACING ENGINES UP TO 6,500 RPM.
115
Line
No.
6
Part Title
Part No
400 ENG - 1965-69 - 8 Cyl. - 4.000 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
25309
25310
Hydraulic Lifters
35309
35310
Mell Lube
Hydraulic Lifters
M-10012
299514
299524
Valve Spring with
Hydraulic Lifters
466124
466134
Valve Locks
Retainers
3pc Set
7
476104
475054
500564
40409
CAN BE USED.
EXH
COMPATIBLE
.295 INT .310 EXH
NOT LISTED
NOT LISTED
EXCLUDES 1966-67 APPLICATIONS
LASH
11/32 inch STEM
403 ENG - 1977-79 - 8 Cyl. - 4.350 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
Hydraulic Lifters
25309
25310
35309
35310
Mell Lube
116
Description
M-10012
CAN BE USED.
EXH
COMPATIBLE
EXH
Line
No.
7
Part Title
Part No
Hydraulic Lifters
Valve Spring with
Hydraulic Lifters
299514
466124
466134
Valve Locks
Retainers
3pc Set
8
476104
475054
40409
11/32" STEM
425 ENG - 1965-67 - 8 Cyl. - 4.125 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
25309
25310
Hydraulic Lifters
35309
35310
Mell Lube
Valve Spring with
Hydraulic Lifters
M-10012
466124
466134
Valve Locks
Retainers
3pc Set
9
Description
476104
475054
40409
CAN BE USED.
1967 CLASS I NOT COMPUTER COMPATIBLE. CAM LIFT .280 INT
.295 EXH
1967 KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ
COMPATIBLE
1967 CLASS II NOT COMPUTER COMPATIBLE. CAM LIFT .295 INT
.310 EXH
1967 CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT NOT
LISTED
1967 CLASS III NOT COMPUTER COMPATIBLE. CAM LIFT NOT
LISTED
1967 KIT INCLUDES 1-[25309] CAM, 16-[29951] LIFTERS & 4OZ
MELL LUBE CLASS III NOT COMPUTER COMPATIBLE
1967 KIT INCLUDES 1-[25310] CAM, 16-[29951] LIFTERS & 4OZ
MELL LUBE CLASS III NOT COMPUTER COMPATIBLE
11/32" STEM
455 ENG - 1968-76 - 8 Cyl. - 4.125 Bore
Oil Pump
M-22FHV
Torque Camshaft
MTO-1
CL-MTO-1
Camshafts Using
Hydraulic Lifters
25211
25309
CAN BE USED.
EXH
COMPATIBLE
EXH
117
Line
No.
9
Part Title
Part No
Description
Camshafts Using
Hydraulic Lifters
Hydraulic Lifters
25310
35309
35310
Mell Lube
Hydraulic Lifters
M-10012
299514
299524
Valve Spring with
Hydraulic Lifters
LASH
11/32" STEM
MAX. SPRING PRESSURE 350 LBS. HEAT TREATED
466124
466134
Valve Locks
Retainers
3pc Set
476104
475054
500564
40409
PERFORMANCE - PONTIAC
Engine
Year
Line
6 Cyl.
Engine
Year
Line
8 Cyl. (Continued)
Engine
Year
Line
8 Cyl. (Continued)
3.8-K,9 (229)
1980-83
1
326
1963-73
7
389
1959-66
14
4.3-Z (262)
1985
2
350
1968-76
8
400
1967-69
15
350-P
1977
9
421
1963-66
16
8 Cyl.
4.4-J (267)
1981-82
3
5.7-L (350)
1977-79
10
428
1967-69
17
301
1977-81
4
5.7-6 (350)
1985
11
455
1970-76
18
5.0 (305)
1977-87
5
5.7-G (350) OHV
1998-02
12
5.0 (307)
1971-72
6
6.0-U (364) OHV
2005-06
13
Line
No.
1
Part Title
Part No
3.8-K,9 (229) ENG - 1980-83 - 6 Cyl. - 3.736 Bore (ENGINE NOT USED IN 1982)
Mell Lube
3pc Set
M-10012
48500T-9
48500W-9
2
4.3-Z (262) ENG - 1985 - 6 Cyl. - 4.00 Bore
Mell Lube
3pc Set
118
Description
M-10012
48500T-9
PERFORMANCE - PONTIAC (Continued)
Line
No.
2
Part Title
48500W-9
M-10012
48500T-9
48500W-9
Oil Pump
299704
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
26303
26308
M-10012
299694
476104
498464
475054
MUST BE USED WITH AN ADJUSTABLE VALVE TRAIN
HI PRESSURE PUMP - INCLUDES SCREEN
HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540)
INCLUDES SCREEN
INCLUDES SCREEN
CLASS I KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS &
4OZ MELL LUBE. NOT COMPUTER COMPATIBLE
CHROME MOLY
5.0 (305) ENG - 1977-87 - 8 Cyl. - 3.736 Bore
Mell Lube
3pc Set
M-10012
48500T-9
48500W-9
6
301 ENG - 1977-81 - 8 Cyl. - 4.000 Bore
Mell Lube
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
5
4.4-J (267) ENG - 1981-82 - 8 Cyl. - 3.50 Bore
Mell Lube
3pc Set
4
Description
4.3-Z (262) ENG - 1985 - 6 Cyl. - 4.00 Bore (Continued)
3pc Set
3
Part No
5.0 (307) ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore
Mell Lube
M-10012
119
Line
No.
6
Part Title
Part No
3pc Set
48500T-9
48500W-9
7
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Valve Locks
Rocker Arms
Retainers
3pc Set
26303
26308
M-10012
299514
299524
476104
498464
475054
500574
40408
INCLUDES SCREEN
EXH
MUST BE USED WITH AN ADJUSTABLE VALE TRAIN SET AT
ZERO LASH
CHROME MOLY
350 ENG - 1968-76 - 8 Cyl. - 3.875 Bore
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Mell Lube
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
120
326 ENG - 1963-73 - 8 Cyl. - 3.719 Bore
Mell Lube
Hydraulic Lifters
8
Description
5.0 (307) ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore (Continued)
26303
26308
M-10012
299514
299524
476104
498464
475054
500274
INCLUDES SCREEN
EXH
ZERO LASH
CHROME MOLY
Line
No.
8
Part Title
40408
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Valve Locks
Rocker Arms
Retainers
3pc Set
26303
26308
M-10012
299514
299524
476104
498464
475054
500274
40408
M-10012
48500T-9
48500W-9
ZERO LASH
CHROME MOLY
5.7-6 (350) ENG - 1985 - 8 Cyl. - 3.875 Bore
Mell Lube
3pc Set
M-10012
48500T-9
48500W-9
12
INCLUDES SCREEN
EXH
5.7-L (350) ENG - 1977-79 - 8 Cyl. - 3.875 Bore
Mell Lube
3pc Set
11
350-P ENG - 1977 - 8 Cyl. - 3.875 Bore
Mell Lube
Hydraulic Lifters
10
Description
3pc Set
9
Part No
5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore LS1
Valve Spring Retainers
Oil Pump
475234
10295
10296
CHROME MOLY
HI PRESSURE PUMP (10% MORE PRESSURE)
PRESSURE RELIEF SPRING SUPPLIED.
121
Line
No.
12
Part Title
22201
M-10012
10295
10296
10355
Mell Lube
M-10012
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Valve Locks
Rocker Arms
Retainers
3pc Set
26303
26308
M-10012
299514
299524
476104
498464
475054
500574
40408
INCLUDES SCREEN
INCLUDES SCREEN
ZERO LASH
CHROME MOLY
400 ENG - 1967-69 - 8 Cyl. - 4.120 Bore
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
INCLUDES SCREEN
EXH
26303
26308
122
HI PRESSURE PUMP (10% MORE PRESSURE) HI PRESSURE
PUMP (10% MORE PRESSURE)
PRESSURE RELIEF SPRING SUPPLIED. HI VOL PUMP (18%
MORE VOLUME OF OIL) FEATURES: HIGH PRESSURE RELIEF
SPRING SUPPLIED.
ADJUSTABLE PRESSURE W/OPTIONAL SPRING. HI VOL PUMP
(33% ADD'L VOL OF OIL) GEN III APPLICATIONS, STD. VOL GEN
IV APPLICATIONS. FEATURES: HARDCOAT ANODIZED BODY,
CAST IRON PHOSPHATE COATED COVER, ADJUSTABLE
PRESSURE W/OPTIONAL SPRINGS.
389 ENG - 1959-66 - 8 Cyl. - 4.062 Bore
Mell Lube
Hydraulic Lifters
15
EXH
6.0-U (364) OHV ENG - 2005-06 - 8 Cyl. - 4.00 Bore (GTO) VORTEC GEN IV
Oil Pump
14
Description
5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore LS1 (Continued)
Camshafts Using
Mell Lube
13
Part No
Line
No.
15
Part Title
M-10012
299514
299524
Valve Locks
Rocker Arms
Retainers
476104
498464
475054
500274
500574
3pc Set
40408
ZERO LASH
CHROME MOLY
1968-1969 MAX. SPRING PRESSURE 350 LBS. EXCLUDES 1967
1967 MAX. SPRING PRESSURE 350 LBS. WITH 1ST TYPE CYL
HEAD WITH PUSH ROD GUIDE PLATE - HEAT TREATED
421 ENG - 1963-66 - 8 Cyl. - 4.093 Bore
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Mell Lube
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
3pc Set
17
Description
Mell Lube
Hydraulic Lifters
16
Part No
26303
26308
M-10012
299514
299524
476104
498464
475054
500574
40408
INCLUDES SCREEN
EXH
ZERO LASH
CHROME MOLY
428 ENG - 1967-69 - 8 Cyl. - 4.120 Bore
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
Mell Lube
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
26303
26308
M-10012
299514
299524
476104
498464
475054
INCLUDES SCREEN
EXH
ZERO LASH
CHROME MOLY
123
Line
No.
17
Part Title
Part No
3pc Set
18
Description
500574
40408
455 ENG - 1970-76 - 8 Cyl. - 4.151 Bore
Oil Pump
10540
10541
Torque Camshaft
MTP-1
CL-MTP-1
Camshafts Using
Hydraulic Lifters
26204
26303
26308
M-10012
299514
299524
Mell Lube
Hydraulic Lifters
Valve Locks
Rocker Arms
Retainers
3pc Set
476104
498464
475054
500274
40408
INCLUDES SCREEN
EXH
ZERO LASH
CHROME MOLY
SPORT COMPACT PERFORMANCE - TOYOTA CARS & TRUCKS
Engine
Year
Line
4 Cyl.
Engine
Year
Line
4 Cyl. (Continued)
2366CC 22RTEC OHC
1985-88
1
2366CC 22R OHC
1981-90
3
2189CC 20R OHC
1975-80
2
2366CC 22RE OHC
1989-95
4
Line
No.
1
Part Title
Part No
27101
27201
Mell Lube
2366CC 22REC OHC
1983-89
5
Description
EXH
EXH
M-10012
27101
27201
Mell Lube
EXH
EXH
M-10012
2366CC 22R OHC ENG - 1981-90 - 4 Cyl. - 92 MM Bore (1981-82 CORONA) (1981-83 CELICA)
(1981-90 PICKUP) (1984 4RUNNER)(CARB. ENGINES)
Camshafts Using
Mechanical Lifters
27101
27201
Mell Lube
124
Line
2189CC 20R OHC ENG - 1975-80 - 4 Cyl. - 88 MM Bore (CORONA, CELICA & PICKUP)
Camshafts Using
Mechanical Lifters
3
Year
2366CC 22RTEC OHC ENG - 1985-88 - 4 Cyl. - 92 MM Bore (1985-88 TRUCK) (1985-88 4RUNNER)
(OHC TURBO ENGINES)
Camshafts Using
Mechanical Lifters
2
Engine
4 Cyl. (Continued)
M-10012
EXH
EXH
SPORT COMPACT PERFORMANCE - TOYOTA CARS & TRUCKS (Continued)
Line
No.
4
Part Title
Part No
Camshafts Using
Mechanical Lifters
27101
27201
Mell Lube
5
Description
2366CC 22RE OHC ENG - 1989-95 - 4 Cyl. - 92 MM Bore (2 WHEEL DRIVE & 4 WHEEL DRIVE
PICKUP & 4 RUNNER) (MULTI-PORT FUEL INJECTION ENGINES)
EXH
EXH
M-10012
2366CC 22REC OHC ENG - 1983-89 - 4 Cyl. - 92 MM Bore (1984-88 TRUCK) (1983-85 CELICA)
(1985-89 4RUNNER) (MULTI-PORT FUEL INJECTION ENGINES)
Camshafts Using
Mechanical Lifters
27101
27201
Mell Lube
EXH
EXH
M-10012
125
CHROME MOLY PUSH ROD IDENTIFICATION CHART
Diameter
Type B
Diameter
Length Diameter
Part No.
(inches) (inches)
500064
9.175
11/32
10.498
11/32
500074
9.564
5/16
500094
9.594
5/16
500104
3/8
500154 (H) 8.280
3/8
500164 (H) 9.252
10.657
3/8
500174
11.585
3/8
500184
9.140
3/8
500194
9.375
5/16
500204
8.635
5/16
500214
7.342
5/16
500224
5/16
500274 (H) 9.130
8.280
7/16
500294
9.252
7/16
500304
5/16
500314 (H) 7.800
8.555
5/16
500324
9.295
5/16
500334
8.555
3/8
500344
9.295
3/8
500354
10.490
3/8
500364
11.457
3/8
500374
8.412
3/8
500384
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
Type C
Type A
Length
End Type
A&B
A&B
B&B
B&B
D&D
D&D
A&C
A&C
A&C
C&D
C&D
A&C
C&C
D&D
D&D
C&C
C&C
C&C
A&E
A&E
A&E
A&E
A&E
Max. Spring
Pressure (lbs)
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
Type D
Length Diameter
Part No.
(inches) (inches)
500394 (H) 8.144
5/16
5/16
500404 (H) 6.886
5/16
500414 (H) 7.605
5/16
500424 (H) 8.408
5/16
500434 (H) 8.492
5/16
500444 (H) 7.645
9.025
3/8
500474
5/16
500494 (H) 9.682
8.750
3/8
500544
8.136
3/8
500554
5/16
500564 (H) 9.547
5/16
500574 (H) 8.693
5/16
500584 (H) 6.776
5/16
500594 (H) 7.513
5/16
500614 (H) 7.894
8.680
3/8
500624
9.652
3/8
500634
5/16
500664 (H) 8.182
7.894
3/8
500674
5/16
501004 (H) 7.800
5/16
501014 (H) 7.900
5/16
501024 (H) 7.950
5/16
501034 (H) 8.000
H = HEAT TREATED FOR USE WITH GUIDE PLATES
D = DRILLED
VALVE IDENTIFICATION CHART
Part No.
451014
451024
451034
451044
451054
451064
451074
451084
451094
451104
451114
451124
451134
451144
451154
451194
451204
126
Head
Diameter
1.940
1.500
2.020
1.600
2.190
1.725
2.300
1.880
1.880
1.451
1.940
1.600
2.190
1.725
1.780
2.250
1.725
Overall
Length
4.880
4.905
4.897
4.881
5.230
5.350
5.230
5.350
5.070
5.070
5.070
5.050
5.231
5.070
5.070
5.280
5.070
Stem
Diameter
.341
.341
.341
.372
.372
.372
.372
.371
.341
.341
.341
.341
.341
.341
.341
.341
.341
Type E
Seat Angle
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
45°
30°
45°
End Type
C&C
C&C
C&C
C&C
C&C
C&C
A&E
C&C
A&C
A&C
C&C
C&C
C&C
C&C
C&C
D&D
D&D
C&C
C&C
C&C
C&C
C&C
C&C
Max. Spring
Pressure (lbs)
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
500
500
500
500
CHROME MOLY VALVE SPRING RETAINER SPECIFICATION CHART
Diameters
Relative
Outside/Steps
Height (inches)
FOR 11/32” VALVE STEMS
1.375/1.060/.675
+.015
1.375/1.060/.675
+.120
1.375/1.060/.675
+.070
1.375/1.085/.805
+.125
1.500/1.135/.665
+.115
1.190/.870/.610
0
FOR 11/32” VALVE STEMS
1.375/1.075/.785
-.040
1.375/1.065/.675
-.120
1.375/1.085/.805
-.015
1.500/1.135/.635
+.010
1.375/1.065/.670
0
1.375/1.035/.785
-.030
Part No.
475304
475044
475054
475074
475114
475184
475024
475064
475084
475094
475124
475144
These retainers are heat treated to 40 ROCKWELL C scale and are all
manufactured for 7° valve locks.
NOTE: There are many tolerances that effect the final location and spring height. The relative height dimension is for
comparison purposes of these retainers. We took a stock SB Chevy retainer with our 45103 valve and 47601 locks
and measured from the rocker arm end of the valve to the spring seat on the retainer. We then took the same dimensions
for our 11/32” stem retainers. The 47518 is the same as the stock retainer and is shown as zero. The relative height tells
how much the assembled spring height will be changed if you changed from the 47518. The 47501 would shorten the
height by .070” while the 47505 would increase it the same amount. The same applies to the 3/8” stem retainers except
we used a stock BB Chevy retainer with our 45105 valve and 47300 locks as a starting point.
VALVE SPRINGS
POUNDS PRESSURE AT THESE HEIGHTS
Part No.
466074
466174
466204
466224
466244
466354
466364
466434
466444
OD
1.525
1.475
1.260
1.539
1.500
1.215
1.260
1.435
1.437
ID
1.88”
1.075 132
1.061 90
0.876
1.125 158
1.064 100
0.861
0.876
1.035
1.075
466114
466274
466124
466134
466154
466164
1.43
.796
1.384
.804
1.55
.780
VS-320
VS-380
128
1.38”
364
260
1.80”
1.30”
115
285
Coil
Bind
1.187
1.125
1.160
1.200
1.156
1.125
1.160
1.125
1.062
# Coils
5.652
6
6.5
6
5.75
6.75
6
5.7
6.5
1.015
6.25
220
0.906
6
349@1.2
1.156
6.5
1.72”
1.22”
1.67”
115
307
134
326
110
260
325
260
235
125
284
105
282
1.17”
318
310
125@1.750
296
105
217
154
322
90
123
105
136@1.9
333@1.3
300@1.4
100
320
80
240
1.35
1.150
• All numbers are nominal
• Springs should be checked in every application
• Springs with dampners should be oiled prior to testing and installing
• Actual coil bind will vary because of the tolerances in the wire diameter
• Coil bind can be checked by compressing the spring in a vise and measuring
• Valve open height should be coil bind plus .100 or more
• Coil bind plus .050 has been used but the life of the spring will be less
127
SCREW IN ROCKER ARM STUDS
Application
CHEVROLET
FORD
PONTIAC
Part
No.
MRDS-941
MRDS-945
MRDS-948
MRDS-960
MRDS-970
MRDS-1920
MRDS-2920
MRDS-940
MRDS-942
MRDS-939
A
Length
2.560
2.250
57mm
61mm
60mm
2.325
2.325
2.670
61mm
2.470
B
Length
1.765
1.490
40mm
40mm
38mm
1.600
1.725
1.910
41mm
1.710
C
Length
0.875
0.770
22mm
24mm
27mm
0.750
0.850
0.810
19mm
0.875
D
Diameter
7/16
3/8
10mm
12mm
10mm
3/8
3/8
7/16
8mm
7/16
Thread Size
Bottom
Top
7/16-14
7/16-20
7/16-14
3/8-24
10mm-1.5
10mm-1.0
10mm-1.5
8mm-1.25
10mm-1.5
8mm-1.25
7/16-14
3/8-24
7/16-14
3/8-24
7/16-14
7/16-20
10mm-1.5
8mm-1.25
7/16-14
3/8-24
HEX NUT
NO HEX NUT
A
A
Hex Nut
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
B
B
C
C
D
• Cold rolled threads
• 190,000 psi alloy steel
D
• Large radii for reduced flex
• Black oxided
CYLINDER SLEEVES
• Universal flanged sleeves provide extra insurance against sleeve
movement in performance applications
• Reduce the critical factors that secure standard liners such as press
fit, cylinder ledge at bottom of bore, and heat expansion rates of metals.
• Flange counter bore thickness in block can be machined .002 less to
provide extra sealing against the gasket and head from the flange sleeve.
• Bore can be up to .060 bigger than standard and still have 3/32”
sleeve wall.
Part
Std. Sleeve Sleeve Sleeve Flange
Sleeve Sleeve
No.
Bore
O.D.
O.D.
O.D. Thickness O.D. Length
.125
4.190 6-3/4
590203 3.9375 3.907 4.330 4.330
.125
4.253 5-1/2
590259 4.000 3.970 4.330 4.330
.125
4.253 5-7/8
590298 4.000 3.970 4.393 4.393
.125
4.253 6-1/4
590236 4.000 3.970 4.393 4.393
.125
4.253 6-1/2
590280 4.000 3.970 4.393 4.393
.125
4.303 6-1/4
590231 4.050 4.020 4.443 4.443
.125
4.303 6-5/16
590295 4.050 4.020 4.443 4.443
.125
4.363 6-7/8
592274 4.110 4.080 4.503 4.503
.125
4.378 7-1/2
592256 4.125 4.095 4.518 4.518
.125
4.378 6-1/4
590261 4.125 4.095 4.518 4.518
.125
4.503
7
590297 4.250 4.220 4.643 4.643
128
PUSHROD GUIDE PLATES
All Melling Select Performance guide plates are stamped from heat treated steel to reduce flexing
and rocker arm side movement. They are black oxide coated to prevent rusting. Guide plates must
be used with screw in rocker arm studs.
Part Number
MGP1004
Thickness
5/16”
Style
Flat
MGP1014
3/8”
Flat
MGP1024
3/8”
Raised
MGP1034
5/16”
Raised
Thickness
7/16”
Style
Raised
3/8”
Raised
Part Number
MGP1064
MGP1074
Part Number
MGP1084
MGP1094
Part Number
MGP1104
MGP1114
Part Number
MGP1124
MGP1134
Thickness
5/16”
3/8”
Thickness
3/8”
5/16”
Style
Flat
Flat
Style
Flat
Flat
Thickness
3/8”
Style
Raised
5/16”
Raised
129
Camshaft Specifications
CAUTION!!
1. Always install new lifters (followers) with a new camshaft. Installing used lifters with a new camshaft can cause premature
failure of both the camshaft and the lifters.
2. Do not allow the engine to run under 1500 RPM for the first 20 minutes. The first few minutes of the engine operation are the
most critical and tests have shown that if there is no metal pickup or spalling during this period, the camshaft will wear as long
as the other engine components.
3. With performance camshafts - usually you will have to advance the distributor timing (on the vibration damper) more than
stock specifications.
4. When installing any high performance or racing camshafts into an engine, check to make sure there is adequate clearance
between the valves and pistons and also make sure the valve springs do not compress solid.
5. On all engines equipped with roto-coils or valve rotors in either the intake or exhaust positions check for possible coil bind.
You might have to change the valve spring and retainer - (using aftermarket high performance valve springs is an alternative).
Listed below is a group classification for the custom (or high) performance camshafts listed in this catalog - (the durations
shown are based on .050 cam lift). The descriptions within each group show the characteristics of the cams in that group as
well as any recommended modifications to the car or engine that will help get the desired performance.
CLASS I (200° - 215°)
Good idle quality. Low RPM torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto
transmission.
CLASS II (215° - 230°)
Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. Manual or auto
transmission. Possibly lower vacuum than stock.
CLASS III (230° - 245°)
Rough idle quality. Good mid to high RPM torque and horsepower. For use with manual or high stall auto transmission. May
need improved carb, exhaust and ignition systems. Combination street and drag. Will have lower vacuum than stock.
CLASS IV
Rough idle quality. Mid to high RPM torque and horsepower. For serious racing. Need proper selection of rear axle ratio and
improvements in carburation and exhaust systems. For use with manual transmission or automatic with a very high stall
converter. Will not have enough vacuum for power accessories.
Melling Select Performance recommends using MELL-LUBE Engine Assembly Lube to prevent scoring or galling during
engine start-up. MELL-LUBE also contains corrosion inhibitors to prevent rust and pitting to new engines. MELL-LUBE is
not for use on cylinder walls or piston rings. MELL-LUBE now has 1,400 PPM zinc for better protection.
130
Use Intake Spec’s
Duration @ .050 Cam Lift
Approx. RPM
Power Range
Approx.
Peak Torque
200°
210°
220°
230°
240°
250°
260°
270°
1000-4500
1500-5000
2000-5500
2500-6000
3000-6500
3500-7000
4000-7500
4500-8000
2500
2800
3000
3500
4000
4500
5000
5500
Part
No.
C-10-P
C-400-P
C-410-P
CASC-2
CASC-3
CASC-4
CASC-5
CCS-1
CCS-12
CCS-16
CCS-18
CCS-2
CCS-20
CCS-21
CCS-22
CCS-23
CCS-24
CCS-25
CCS-26
CCS-27
CCS-29
CCS-3
CCS-30
CCS-31
CCS-32
CCS-33
CCS-34
CCS-35
CCS-36
CCS-37
SAE Specs@
Specs @ 0.50 Cam Lift
(0.06/Rocker Arm Ratio) Cam Lift
Opens
Closes
Duration Opens
Closes Duration
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
30 BBC
-12 BTC
-17 BTC
38 BBC
-17 BTC
35 BBC
34 BBC
-10 BTC
-10 BTC
34 BBC
13 BBC
23 BTC
-5 BTC
29 BBC
10 BBC
-20 BTC
-11 BTC
37 BBC
33 BBC
-14 BTC
-20 BTC
20 BBC
-5 BTC
43 BBC
-18 BTC
28 BBC
-9 BTC
36 BBC
-12 BTC
36 BBC
-20 BTC
13 BBC
-20 BTC
28 BBC
-12 BTC
30 BBC
12 BBC
-22 BTC
-16 BTC
27 BBC
19 BBC
-6 BTC
21 BTC
27 BBC
29 BBC
-10 BTC
29 BBC
-10 BTC
28 BBC
-20 BTC
39 BBC
-13 BTC
37 BBC
-7 ATC
35 ABC
31 ABC
-8 ATC
36 ABC
-12 ATC
-16 ATC
25 ABC
25 ABC
-16 ATC
24 ATC
12 ABC
19 ABC
-15 ATC
-18 ATC
12 ABC
-25 ABC
-14 ATC
-17 ATC
30 ABC
33 ABC
-7 ATC
35 ABC
-10 ATC
14 ABC
-14 ATC
18 ABC
-14 ATC
25 ABC
-13 ATC
12 ABC
-3 ATC
16 ABC
-14 ATC
21 ABC
-17 ATC
-20 ATC
14 ABC
15 ABC
-11 ATC
-6 ATC
19 ABC
25 ABC
20 ATC
-13 ATC
26 ABC
-13 ATC
26 ABC
-15 ATC
16 ABC
-17 AT
11 AB
-10 ATC
203
203
194
210
199
203
198
195
168
170
170
168
194
194
172
172
194
203
196
196
193
193
210
213
176
194
189
202
193
203
172
190
176
194
189
193
172
172
179
196
193
193
204
205
196
194
196
196
193
176
202
178
207
70 BBC
-12 BTC
21 BTC
76 BBC
12 BTC
64 BBC
63 BBC
21 BTC
21 BTC
63 BBC
42 ATC
84 ABC
83 ABC
44 ATC
94 ABC
38 ATC
26 ATC
71 ABC
71 ABC
26 ATC
25 BTC
59 BBC
59 BBC
29 BTC
14 BTC
62 BBC
63 BBC
16 BTC
11 BTC
51 BBC
28 BTC
77 BBC
16 BTC
48 BBC
14 BTC
63 BBC
19 BTC
66 BBC
29 BTC
56 BBC
14 BTC
54 BBC
63 ABC
29 ATC
30 ATC
61 ABC
66 ABC
29 ATC
27 ATC
74 ABC
78 ABC
38 ATC
80 ABC
37 ATC
54 ABC
25 ATC
56 ABC
26 ATC
69 ABC
34 ATC
61 ABC
40 ATC
50 ABC
25 ATC
12 BBC
13 BTC
7 BTC
51 BBC
50 BBC
24 BTC
30 ATC
70 ABC
51 ABC
25 ATC
37 ATC
63 ABC
53 BBC
14 BTC
53 BBC
14 BTC
54 BBC
14 BTC
63 BBC
23 ATC
62 ABC
23 ATC
62 ABC
24 ATC
50 ABC
28 ATC
292
292
284
300
286
282
269
272
286
344
344
288
268
268
270
270
260
271
270
270
269
269
285
297
244
259
250
269
268
280
270
276
244
259
244
244
262
263
238
256
268
268
284
284
256
256
256
256
258
244
300
260
271
Cam
Lift
Gross
Valve Lift
.273
.273
.258
.282
.266
.274
.246
.240
.210
.224
.224
.210
.257
.257
.221
.221
.260
.273
.234
234
.234
.234
.259
.259
.234
.257
.248
.273
.234
.253
.222
.232
.234
.257
.274
.280
.222
.222
.231
.262
.234
.234
.241
.241
.263
.263
.263
.263
.257
.234
.280
.280
.276
.450
.450
.425
.465
.458
.471
.369
.360
.315
.336
.320
.309
.351
.351
.387
.387
.390
.410
.412
.412
.408
.408
.453
.453
.351
.385
.372
.409
.409
.442
.388
.406
.351
.385
.411
.420
.333
.333
.346
.394
.411
.411
.386
.386
.394
.394
.394
.394
.384
.351
.448
.448
.414
Center Rocker Valve Lash
Line C/L Arm Ratio Clearance
111
111
113
113
115
115
111
111
108
108
108
108
102
112
104
106
108
116
119
107
104
116
109
117
106
112
102
116
104
116
106
98
108
112
111
111
107
107
105
109
109
96
112
114
111
108
111
108
112
108
120
100
114
1.65
1.72
1.6
1.5
1.3
1.75
1.5
1.75
1.5
1.75
1.5
1.75
1.6
1.5
1.6
1.5
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
0.015
0.008
0.006
0.016
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
.006
.018
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
131
CAMSHAFT SPECIFICATIONS (Cont. )
Part
No.
CCS-38
CCS-39
CCS-4
CCS-40
CCS-41
CCS-42
CCS-5
CCS-6
CCS-9
CFC-1
CFC-3
CLT-1
CLT-2
FCC-2
FOV-9
HSC-11
HSC-12
HSC-3
HSC-4
HSC-5
HSC-8
HSC-9
MC1200
MC1210
MC1220
MC1230
MC1231
MC1232
MC1234
132
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
-14 BTC
36 ABC
202
12 BTC
77 ABC
259
29 BBC
-14 ATC
195
57 BBC
25 ATC
282
-12 BTC
18 ABC
179
14 BTC
58 ABC
252
28 BBC
14 ATC
194
56 BBC
24 ATC
260
-17 BTC
16 ABC
179
16 BTC
56 ABC
252
-14 BTC
24 ABC
190
18 BTC
73 ABC
272
35 BBC
-17 ATC
198
68 BBC
31 ATC
280
-14 BTC
41 ABC
207
14 BTC
77 ABC
271
43 BBC
-9 ATC
214
74 BBC
26 ATC
280
-27 BTC
13 ABC
189
10 BTC
60 ABC
250
22 BBC
37 ATC
203
63 BBC
26 ATC
269
27 BBC
-13 ATC
194
50 BBC
28 ATC
258
-12 BTC
26 ABC
194
14 BTC
64 ABC
258
22 BBC
16 ATC
185
270
17 BTC
21 ABC
185
270
20 BTC
10 ABC
172
244
12 BBC
18 ATC
172
244
-19 BTC
27 ABC
188
25 BTC
71 ABC
276
24 BBC
-16 ATC
188
68 BBC
28 ATC
276
-13 BTC
17 ABC
184
6 BTC
43 ABC
229
17 BBC
-13 ATC
184
36 BBC
9 ATC
225
11 BBC
-13 ATC
178
36 BBC
24 ATC
240
-22 BTC
20 ABC
178
3 BTC
57 ABC
240
208
208
264
204
204
254
213
244
213
239
-17 BTC
29 ABC
184
20 BTC
90 ABC
254
23 BBC
-11 ATC
185
60 BBC
50 ATC
255
218
225
218
225
222
298
218
271
222
298
218
271
208
214
210
208
208
210
-15 BTC
31 BBC
-14 BTC
35 BBC
12 BTC
38 BBC
28 ABC
-18 ATC
18 ABC
-14 ATC
25 ABC
-20 ATC
194
194
194
194
193
193
184
201
193
198
15 BTC
61 BBC
80 ABC
34 ATC
275
275
254
270
Cam
Lift
.269
.256
.234
.257
.234
.229
.235
.274
.285
.248
.273
.260
.260
.271
.271
.222
.222
.232
.232
.240
.239
.232
.232
.273
.273
.230
.231
.276
.275
.245
.245
.267
.262
.267
.262
.271
.270
.271
.270
.256
.258
.226
.226
.226
.226
.260
.260
.260
.260
.272
.272
.245
.259
.257
.264
Gross
Valve Lift
.403
.386
.351
.385
.350
.400
.412
.410
.427
.372
.410
.390
.390
.406
.406
.333
.333
.406
.406
.360
.358
.348
.348
.409
.409
.345
.346
.367
.367
.435
.435
.424
.448
.445
.457
115
HYD
112
HYD
108
HYD
112
HYD
106
HYD
116
1.75
HYD
109
HYD
117
1.5
HYD
117
HYD
106
HYD
116
HYD
111
HYD
108
HYD
109
HYD
109
HYD
105
HYD
105
HYD
113
1.75
HYD
110
HYD
103
1.5
0.016
105
0.016
111
HYD
102
HYD
1.45
0.006
1.5
0.01
0.012
0.012
HYD
HYD
0.011
0.006
0.011
0.006
0.006
0.008
MECH
MECH
0.008
0.006
0.008
0.01
0.01
0.008
112
108
111
115
106
114
108
119
1.6
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
Part
No.
MC1235
MC1236
MC1237
MC1238
MC1239
MC1240
MC1241
MC1242
MC1243
MC1244
MC1245
MC1246
MC1247
MC1248
MC1249
MC1250
MC1251
MC1252
MC1253
MC1254
MC1255
MC1256
MC1257
MC1258
MC1259
MC1260
MC1261
MC1262
MC1263
MC1265
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
Cam
Lift
212
Gross
Valve Lift
1.1
.410
.410
-20 BTC
24 BBC
-14 BTC
34 BBC
30 BBC
-12 BTC
21 ABC
-12 ATC
19 ABC
-13 ATC
-15 ATC
27 ABC
-17 BTC
33 BBC
-16 BBC
32 BBC
-24 BTC
26 BBC
25 ABC
-22 ATC
22 ABC
-21 ATC
25 ABC
-15 ATC
-22 BTC
27 BBC
26 ABC
-14 ATC
-25 BTC
37 BBC
37 BBC
-11 BTC
25 BBC
-15 BTC
45 ABC
-17 ATC
-17 ATC
31 ABC
-14 ATC
26 ABC
25 BBC
-15BTC
-13 BTC
33 BBC
-14 ATC
26 ABC
18 ABC
-17 ATC
192
192
210
210
219
217
181
192
185
201
195
195
182
182
182
182
208
197
229
229
188
191
188
191
181
191
191
191
184
193
186
186
190
192
200
200
200
200
191
191
189
206
185
202
191
191
205
196
184
12 BTC
57 BBC
14 BTC
70 BBC
61 BBC
19 BTC
72 ABC
38 ATC
72 ABC
25 ATC
31 ATC
74 ABC
248
250
250
264
273
273
20 BTC
73 BBC
21 BTC
70 BBC
110 BTC
70 BBC
93 ABC
51 ATC
92 ABC
49 ATC
92 ABC
52 ATC
294
304
293
299
284
301
8 BTC
58 BBC
66 ABC
29 ATC
254
267
8 BTC
70 BBC
70 BBC
22 BTC
25 BBC
16 BTC
99 ABC
37 ATC
37 ATC
85 ABC
36 ATC
76 ABC
287
287
287
287
272
272
55 BBC
15 BTC
15 BTC
61 BBC
35 ATC
75 ABC
75 ABC
18 ATC
270
270
270
259
.239
.239
.265
.265
.230
.230
.248
.267
.240
.241
.260
.260
.246
.246
.246
.246
.230
.210
.291
.291
.252
.255
.250
.255
.252
.255
.267
.267
.258
.269
.245
.245
.239
.248
.260
.260
.260
.260
.261
.261
.263
.276
.275
.275
.260
.260
.265
.265
.256
.372
.401
.415
.417
.455
.455
.394
.394
.394
.394
108
110
106
114
113
109
97
97
123
123
.453
.459
.400
.408
.403
.408
111
117
109
117
115
109
.413
.430
114
110
.416
.416
.416
.416
.392
.392
.394
.414
.412
.412
.417
.417
.420
.420
124
118
118
110
110
110
107
117
106
110
110
110
112
116
1.5
1.75
1.6
1.8
1.6
1.5
1.6
HYD
HYD
HYD
HYD
.008
.013
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
133
Part
No.
MC1266
MC1267
MC1268
MC1269
MC1270
MC1271
MC1272
MC1273
MC1274
MC1275
MC1276
MC1277
MC1278
MC1279
MC1280
MC1281
MC1283
MC1284
MC1285
MC1286
MC1287
MC1288
MC1289
MC1290
MC1291
MC1292
MC1293
MC1294
MC1295
134
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
185
-14 BTC
30 BBC
-18 BTC
28 BBC
-15 BTC
29 BBC
26 ABC
-18 ATC
27 ABC
-17 ATC
23 ABC
-21 ATC
36 BBC
-10 BTC
32 BBC
-25 BTC
-8 ATC
26 ABC
-15 ATC
31 ABC
192
192
191
191
188
188
216
216
196
209
183
193
208
208
204
N/A
204
N/A
200
191
188
196
196
188
230
230
196
196
232
232
232
232
230
230
208
196
197
185
-13 BTC
29 BBC
-14 BTC
37 BBC
27 ABC
-7 ATC
34 ABC
-11 ATC
194
202
200
206
17 BTC
30 BBC
39 BBC
-17 BTC
20 ABC
-17 ATC
-11 ATC
45 ABC
40 BBC
-18 BTC
-20 ATC
29 ABC
25 BTC
69 BBC
19 BTC
63 BBC
58 BTC
102 BBC
66 ABC
22 ATC
67 ABC
23 ATC
111 ABC
67 ATC
271
271
266
266
349
349
250
250
74 BBC
26 BTC
65 BBC
10 BTC
42 ATC
68 ABC
37 ATC
83 ABC
296
274
263
273
13 BTC
57 BBC
15 BTC
64 BBC
65 ABC
268
75 ABC
29 ATC
270
273
16 BTC
62 BBC
70 BBC
13 BTC
58 ABC
22 ATC
24 ATC
84 ABC
254
264
274
277
73 BBC
16 BTC
35 ATC
87 ABC
288
282
Cam
Lift
.256
Gross
Valve Lift
.248
.248
.248
.248
.248
.248
.401
.401
.273
.299
.251
.268
.293
.288
.297
.297
.297
.297
.260
.252
.259
.259
.259
.259
.293
.293
.267
.267
.293
.293
.293
.293
.293
.293
.275
.275
.279
.263
.434
.434
.434
.434
.438
.438
.401
.401
109
115
109
115
109
115
115
105
1.75
.376
.402
.439
.432
108
114
115
121
1.5
.416
.403
120
114
1.6
.440
.440
.446
.421
101
101
101
101
100
100
112
108
115
115
.421
.430
109
109
114
114
.260
.273
.248
.253
HYD
1.0
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
.009
.013
HYD
HYD
HYD
HYD
N/A
0.008
N/A
0.01
HYD
HYD
HYD
HYD
HYD
HYD
0.01
N/A
HYD
HYD
0.008
0.008
HYD
HYD
HYD
HYD
HYD
HYD
1.7
HYD
HYD
Part
No.
MC1296
MC1297
MC1298
MC1299
MC1300
MC1301
MC1302
MC1303
MC1304
MC1309
MC1310
MC1311
MC1315
MC1316
MC1317
MC1318
MC1319
MC1320
MC1328
MC1329
MC1330
MC1331
MC1334
MC1335
MC1336
MC1337
MC1338
MC1339
MC1344
MC1345
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
EXH.
INT.
INT. -6 BTC
EXH. 30 BBC
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
14 ABC
-18 ATC
188
192
24
61
52
19
256
260
Cam
Lift
Gross
Valve Lift
.255
.259
.407
.415
107.5
107.5
201
201
188
196
196
188
198
198
197
197
.334
.334
.259
.259
.259
.259
.287
.287
.272
.272
.430
.430
.408
.408
110
116
113
111
191
195
209
204
197
209
.276
.286
.284
.282
.292
.292
.415
.429
.483
.480
.496
.496
106
116
118
118
123
116
194
191
.285
.276
.428
.414
116
106
188
194
202
208
201
208
195
191
.274
.278
.299
.306
.297
.306
.285
.276
.411
.417
.449
.460
.446
.459
.428
.414
116
107
116
117
117
117
116
106
1.6
1.5-1
1.7-1
1.5-1
HYD
HYD
HYD
HYD
HYD
HYD
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd
Hyd.
Hyd.
Hyd.
Hyd.
135
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
Part
No.
MC1351
MC1352
MC1353
MC1360
MC1361
MC1362
MC1364
MC1365
MC1374
MC1375
MC1376
MC1377
MC1378
MC1379
MC1382
MC762
MC769
MC794
MC797
MC803
MC809
MC810
MC814
MC816
MC817
MC820
MC821
MC822
MC830
136
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
30 BBC
-15.5 BTC
-13 ATC
32.5 ABC
188
193
193
188
214
267
214
210
197
197
175
159
176
212
61 BBC
30 ATC
15.5 BTC 75.5 ABC
271
271
188
190
188
190
30 BBC
-20 BTC
-19 ATC
31 ABC
17 ATC
26 BBC
29 ABC
14 BTC
32 BBC
-12 BTC
-15 ATC
29 ABC
-4 BTC
37 BBC
20 ABC
-17 ATC
191
191
232
232
224
224
192
192
193
189
197
197
230
230
196
200
222
223
220
219
220
220
202
216
220
220
166
164
62 BBC
12 BTC
29 ATC
79 ABC
271
271
276
276
61 BBC
17 BTC
29 ATC
73 ABC
270
270
31 BTC
61 BBC
64 ABC
35 ATC
276
294
240
234
Cam
Lift
.295
.259
.259
.259
.267
.221
.267
.221
.272
.272
0.17904
0.1776
0.3170
0.2897
Gross
Valve Lift
.409
.409
112
113.75
.255
.259
.255
.259
0.408
0.414
0.408
0.414
110
105
110
105
HYD
HYD
HYD
HYD
.259
.259
.292
.292
.259
.259
.230
.230
.256
.250
.265
.265
.293
.293
.246
.254
.281
.283
.278
.279
.276
.276
.235
.250
.276
.276
.214
.212
.390
.390
115
115
101
101
HYD
HYD
.403
.403
1.5
1.75
.369
.381
113
110
109
109
112
112
100
100
102
117
.390
.416
120
120
1.7
.397
.397
1.5
HYD
HYD
0.008
MECH
MECH
HYD
HYD
MECH
HYD
HYD
HYD
HYD
HYD
0.006
0.006
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
Part
No.
MC831
MC832
MC835
MC836
MC839
MC840
MC841
MTA-1
MTB-1
MTB-2
MTC-1
MTC-5
MTC-6
MTD-1
MTD-2
MTF-1
MTF-2
MTF-3
MTF-4
MTF-5
MTF-6
MTO-1
MTP-1
MTP-2
ROC-10
RVO-D
SBC-11
SBC-12
SBC-13
SBC-14
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
200
241
23 BTC
29 BBC
32 BBC
19 BTC
22 ABC
14 ATC
19 ATC
24 ABC
200
241
254
254
276
276
3o ATC
42o BBC
44o BBC
5o ATC
41o BBC
12o ATC
27o
8o
10o
29o
17o
26o
ABC
BTC
BTC
ABC
BTC
ABC
5o ATC
5o ATC
44o BBC
6o ATC
40o BBC
44o BBC
5o ATC
5o ATC
44o BBC
44o BBC
5o ATC
5o ATC
44o BBC
44o BBC
5o ATC
5o ATC
44o BBC
44o BBC
5o ATC
44o BBC
5o ATC
5o ATC
44o BBC
3o ATC
29o
29o
10o
30o
12o
10o
29o
29o
10o
10o
29o
29o
10o
10o
29o
29o
10o
10o
29o
10o
29o
29o
10o
27o
ABC
ABC
BTC
ABC
BTC
BTC
ABC
ABC
BTC
BTC
ABC
ABC
BTC
BTC
ABC
ABC
BTC
BTC
ABC
BTC
ABC
ABC
BTC
ABC
5o ATC
44o BBC
9 BTC
55 BBC
29o ABC
10o BTC
43 ABC
-3 ATC
188
188
193
193
203
204
206
206
205
205
204
214
214
204
204
194
214
204
204
214
204
208
214
204
204
214
214
204
204
214
214
204
204
214
214
204
214
204
204
214
204
214
204
214
232
232
-19 BTC
16 BBC
28 BBC
-14 BTC
-15 BTC
28 BBC
28 BBC
12 ABC
-14 ATC
-14 ATC
14 ABC
29 ABC
-14 ATC
-12 ATC
173
182
194
180
194
194
196
30o
75o
77o
28o
74o
21o
BTC
BBC
BBC
BTC
BBC
BTC
70o
35o
33o
72o
26o
69o
ABC
ATC
ATC
ABC
ATC
ABC
27o
27o
76o
36o
86o
76o
27o
27o
76o
77o
28o
29o
78o
78o
29o
29o
78o
77o
28o
77o
28o
28o
77o
29o
BTC
BTC
BBC
BTC
BBC
BBC
BTC
BTC
BBC
BBC
BTC
BTC
BBC
BBC
BTC
BTC
BBC
BBC
BTC
BBC
BTC
BTC
BBC
BTC
71o
71o
32o
72o
32o
32o
71o
71o
32o
33o
72o
73o
34o
34o
73o
73o
34o
33o
72o
33o
72o
72o
33o
69o
ABC
ABC
ATC
ABC
ATC
ATC
ABC
ABC
ATC
ATC
ABC
ABC
ATC
ATC
ABC
ABC
ATC
ATC
ABC
ATC
ABC
ABC
ATC
ABC
29o BTC 73o ABC
78o BBC 34o ATC
4 BTC
101 ABC
94 BBC
55 ATC
14 BTC
54 BBC
69 BBC
17 BTC
19 BTC
69 BBC
66 BBC
52 ABC
34 ATC
31 ATC
54 ABC
74 ABC
31 ATC
30 ATC
Cam
Lift
Gross
Valve Lift
.350
280
290
290
280
280
270
288
278
278
288
288
298
288
278
278
288
290
280
282
292
292
282
282
292
290
280
290
280
280
290
278
288
282
292
329
329
.216
.216
.245
.245
.225
.225
.220
.220
.237
.237
.280
.295
.295
.280
.280
.265
.295
.280
.280
.295
.270
.270
.295
.280
.280
.295
.295
.280
.280
.295
.295
.280
.280
.295
.295
.280
.296
.281
.280
.295
.280
.295
.280
.295
.296
.296
.356
.355
.392
.392
.448
.472
.472
.448
.448
.424
.433
.420
.420
.443
.459
.459
.443
.420
.420
.443
.472
.448
.484
.510
.511
.485
.484
.510
.472
.448
.475
.451
.448
.472
.420
.443
.490
.516
.474
.474
242
262
280
251
272
280
276
.207
.216
.240
.224
.251
.240
.264
.310
.324
.384
.359
.401
.384
.422
HYD
HYD
HYD
HYD
108
1.6
HYD
116
HYD
116
HYD
107
HYD
MECH
MECH
122
122
0.012
HYD
HYD
105o
HYD.
115o
HYD.
117
HYD.
107
HYD.
119
HYD.
109
HYD.
117
HYD.
107
1.5
HYD.
107
HYD.
117
HYD.
108
1.7
HYD.
116
HYD.
117
1.5
HYD.
107
HYD.
107
HYD.
117
HYD.
117
1.6
HYD.
107
HYD.
107
1.73
HYD.
117
HYD.
117
1.75
HYD.
107
HYD.
107
1.73
HYD.
117
HYD.
117
1.6
HYD.
107
HYD.
114
HYD.
106
HYD.
107
HYD.
117
HYD.
108
1.5
HYD.
118
HYD.
107
1.75
HYD.
117
HYD.
107
1.6
HYD
119
HYD
105
106
110
104
112
110
110
1.5
1.6
HYD
HYD
HYD
HYD
HYD
HYD
HYD
137
Part
No.
SBC-15
SBC-16
SBC-3
SBC-4
SBC-5
SBC-8
SBOT-1
SDC-1
SDC-3
SDC-4
SDC-5
SDC-6
SDC-7
SDC-8
SFP-2
SFP-4
SFP-5
SGM-1
SIH-1
SIH-3
SIH-5
SIH-6
SOC-10
SOC-12
SOC-14
SOC-9
SPC-10
SPC-11
SPC-12
138
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
-8 BTC
21 ABC
193
30 BTC
72 ABC
282
28 BBC
-14 ATC
194
68 BBC
31 ATC
280
-14 BTC
14 ABC
180
17 BTC
54 ABC
251
28 BBC
-14 ATC
194
66 BBC
31 ATC
280
-14 BTC
14 ABC
180
17 BTC
54 ABC
251
-9 BTC
36 ABC
207
23 BTC
81 ABC
284
39 BBC
-12 ATC
207
71 BBC
33 ATC
284
52 BBC
-7 ATC
225
95 BBC
53 ATC
328
-18 BTC
32 ABC
194
11 BTC
91 ABC
282
40 BBC
15 ATC
208
297
12 BTC
24 ABC
189
276
31 BBC
-12 ATC
194
66 BBC
37 ATC
283
-15 BTC
29 ABC
194
18 BTC
74 ABC
272
196
276
196
276
200
285
181
285
219
219
171
175
38 BBC
-41 BTC
-7 BTC
35 BBC
12 BTC
38 BBC
33 BBC
18 BTC
19 BBC
21 BTC
29 BBC
-12 BTC
-21 BTC
24 BBC
17 BBC
-15 BTC
-16 BTC
25 BBC
30 BBC
-14 BTC
-22 BTC
29 BBC
34 BBC
-13 BTC
25 BBC
-18 BTC
-18 BTC
14 BBC
-11 BTC
26 BBC
-22 ATC
57 ABC
29 ABC
-13 ATC
28 ABC
6 ATC
8 ATC
24 ABC
17 ATC
25 ABC
-11 ATC
14 ABC
35 ABC
-10 ATC
-13 ATC
11 ABC
16 ABC
-18 ATC
-18 ATC
6 ABC
11 ABC
-13 ATC
-14 ATC
20 ABC
-15 ATC
28 ABC
19 ABC
-13 ATC
40 ABC
-17 ATC
205
206
226
226
227
227
196
196
202
202
192
206
205
186
198
188
198
182
194
194
184
176
180
187
192
172
178
187
200
187
190
190
181
181
209
189
7 BBC
-13 BTC
13 BTC
53 BBC
17 ATC
10 ABC
65 ABC
14 ATC
62 BBC
19 BTC
19 BBC
64 BBC
22 ATC
45 ABC
75 ABC
30 ATC
18 BTC
63 BBC
67 BBC
20 BTC
17 BTC
60 BBC
73 BBC
25 BTC
68 BBC
25 BTC
8 BTC
40 BBC
19 BTC
54 BBC
58 ABC
34 ATC
27 ATC
48 ABC
52 ABC
16 ATC
38 ATC
72 ABC
28 ATC
71 ABC
68 ABC
36 ATC
93 ABC
30 ATC
268
268
258
247
202
206
277
252
252
260
264
244
274
274
210
174
256
277
274
248
249
256
291
277
276
276
256
256
292
264
Cam
Lift
.250
.240
.224
.240
.224
.269
.269
.285
.244
.252
.242
.244
.251
.251
.251
.276
.276
.289
.289
.222
.232
.223
.233
.269
.269
.280
.280
.244
.244
.256
.256
.236
.232
.278
.279
.236
.262
.265
.265
.272
.272
.253
.254
.247
.250
.235
.235
.247
.251
.251
.250
.232
.232
.233
.233
.252
.243
Gross
Valve Lift
.400
.384
.358
.384
.358
.430
.430
.453
.388
.378
.363
.401
.391
.401
.401
.390
.390
.384
.384
.340
.341
.407
.419
.428
.445
.440
.440
.435
.435
.405
.406
.395
.400
.376
.376
.395
.401
.401
.400
.406
.406
.349
.349
.378
.364
104
HYD
110
HYD
104
HYD
110
HYD
104
HYD
112
HYD
116
HYD
120
HYD
114
HYD
116
1.5
HYD
109
HYD
112
1.6
HYD
112
HYD
112
HYD
106
HYD
.010
.012
MECH
MECH
0.014
0.014
111
129
108
114
107
115
112
111
110
111
110
103
118
107
105
103
106
112
114
100
102
116
112
106
110
113
108
104
115
112
1.5
1.7
1.6
1.75
1.5
0.011
0.011
0.012
0.012
0.012
0.012
HYD
HYD
HYD
HYD
0.017
0.01
0.012
0.02
HYD
HYD
0.025
0.025
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
Part
No.
SPC-13
SPC-15
SPC-16
SPC-17
SPC-18
SPC-19
SPC-2
SPC-3
SPC-4
SPC-5
SPC-7
SPC-8
SPC-9
SPD-11
SPD-16
SPD-20
SPD-22
SPD-24
SPD-25
SPD-27
SPD-28
SPD-29
SPD-3
SPD-30
SPD-31
SPD-32
SPD-33
SPD-34
SPD-35
SRC-5
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
-18 BTC
28 ABC
190
25 BTC
71 ABC
276
25 BBC
-13 ATC
190
69 BBC
28 ATC
276
201
202
247
-14 BTC
14 ABC
223
17 BTC
54 ABC
270
28 BBC
-14 ATC
223
68 BBC
31 ATC
265
24 BBC
-16 ATC
188
66 BBC
24 ATC
270
-19 BTC
27 ABC
188
23 BTC
67 ABC
270
-19 BTC
27 ABC
188
23 BTC
67 ABC
270
24 BBC
-16 ATC
188
66 BBC
24 ATC
270
214
252
214
-15 BTC
29 ABC
190
18 BTC
74 ABC
280
28 BBC
-14 ATC
190
69 BBC
31 ATC
280
57 BBC
-1 ATC
236
86 BBC
44 ATC
310
0 BTC
44 ABC
224
29 BTC
88 ABC
297
-7 BTC
25 BBC
198
21 BTC
70 ABC
271
40 BBC
-12 ATC
208
68 BBC
32 ATC
280
-6 BTC
26 ABC
200
26 BTC
78 ABC
284
41 BBC
-11 ATC
210
73 BBC
40 ATC
293
-7 BTC
39 ABC
212
21 BTC
84 ABC
285
50 BBC
-5 ATC
225
80 BBC
38 ATC
298
3 BTC
48ABC
231
32 BTC
92 ABC
304
54 BBC
6 ATC
240
84 BBC
51 ATC
315
24 BBC
-15 ATC
189
52 BBC
32 ATC
264
-11 BTC
20 ABC
189
17 BTC
67 ABC
264
40 BBC
-11 ATC
209
74 BBC
39 ATC
293
-7 BTC
33 ABC
206
22 BTC
74 BBC
284
-10 BTC
23 ABC
193
21 BTC
68 ABC
269
27 BBC
-13 ATC
194
64 BBC
28 ATC
272
-20 BTC
20 ABC
180
12 BTC
72 ABC
264
24 BBC
-12 ATC
192
57 BBC
38 ATC
275
-8 BTC
37 ABC
209
20 BTC
79 ABC
279
46 BTC
-6 ATC
220
79 BBC
30 ATC
289
27 BBC
-13 ATC
194
64 BBC
28 ATC
272
-10 BTC
23 ABC
193
21 BTC
68 ABC
269
-7 BTC
29 ABC
203
22 BTC
76 ABC
278
31 BBC
-9 ATC
203
61 BBC
37 ATC
278
15 BBC
-8 ATC
187
40 BBC
34 ATC
254
-15 BTC
22 ABC
187
10 BTC
64 ABC
254
41 BBC
-4 ATC
217
63 BBC
30 ATC
274
5 BTC
32 ABC
217
27 BTC
68 ABC
274
41 BBC
-4 ATC
217
63 BBC
30 ATC
273
5 BTC
32 ABC
217
27 BTC
66 ABC
273
-8 BTC
26 ABC
198
21 BTC
70 ABC
271
33 BBC
-10 ATC
203
56 BBC
24 ATC
260
5 BTC
28 ABC
213
29 BTC
59 ABC
268
45 BBC
-12 ATC
213
69 BBC
-6 BTC
39 ABC
213
26 BTC
96 ABC
302
50 BBC
-5 ATC
225
83 BBC
61 ATC
324
232
232
5 BTC
28 ABC
213
268
45 BBC
12 BTC
213
268
194
267
190
264
190
194
267
-11 BTC
27ABC
196
14 BTC
68 ABC
263
Cam
Lift
.232
.232
.239
.240
.251
.253
.231
.231
.231
.231
.262
.262
.251
.240
.271
.270
.270
.272
.271
.274
.272
.271
.313
.313
.243
.243
.287
.289
.238
.238
.248
.266
.286
.296
.240
.240
.273
.273
.252
.252
.243
.243
.243
.243
.270
.275
.243
.243
.298
.306
.293
.293
.243
.243
.245
.245
.245
.245
.266
Gross
Valve Lift
.405
.405
.406
.408
.417
.421
.404
.404
.404
.404
113
1.75
HYD
110
HYD
1.7
123
123
110
113
113
110
1.75
1.7
.402
.384
.407
.406
.404
.408
.407
.411
.408
.406
.469
.469
.364
.364
.431
.434
.357
.357
.372
.399
.429
.444
.360
.360
.409
.409
.378
.378
.437
.437
.437
.437
.405
.412
.437
.437
.447
.459
.437
.437
.433
.433
.441
.441
.425
112
110
119
112
106
116
106
116
113
118
112
115
110
105
116
110
106
110
110
108
112
116
110
106
108
111
102
108
104
112
104
112
106
112
1.6
1.5
15
1.5
1.8
1.5
1.8
111
115
101
101
110
110
113
113
109
HYD
.009
.009
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
0.012
0.01
HYD
1.5
HYD
HYD
.008
1.8
HYD
HYD
HYD
HYD
1.6
HYD
HYD
139
Part
No.
SRC-6
SRC-8
SRC-9
SVO-A
SVW-1
SWC-1
SYB-13
SYB-16
SYB-19
SYB-2
SYB-21
SYB-22
SYB-23
SYB-24
SYB-25
SYB-26
SYB-27
SYB-29
SYB-30
SYB-31
SYB-32
SYB-33
SYB-35
SYB-36
SYB-37
SYB-38
SYB-39
SYB-40
SYB-41
140
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
30 BBC
-14 ATC
196
56 BBC
26 ATC
263
-17 BTC
22 ABC
185
12 BTC
66 ABC
259
23 BBC
-18 ATC
185
53 BBC
25 ATC
259
29 BBC
-19 ATC
190
57 BBC
25 ATC
262
-19 BTC
29 ABC
190
9 BTC
73 ABC
262
-17 BTC
33 ABC
196
12 BTC
78 ABC
270
27 BBC
-11 ATC
196
56 BBC
34 ATC
270
34 BBC
-17 ATC
197
57 BBC
10 ATC
247
-8 BTC
25 ABC
197
18 BTC
55 ABC
253
224
310
224
298
204
350
198
346
-19 BTC
25 ABC
186
16 BTC
75 ABC
271
27 BBC
-21 ATC
186
62 BBC
29 ATC
271
-10 BTC
22 ABC
192
24 BTC
73 ABC
277
30 BBC
-18 ATC
192
64 BBC
33 ATC
277
-14 BTC
27 ABC
193
18 BTC
75 ABC
273
39 BBC
-13 ATC
206
72 BBC
35 ATC
287
-12 BTC
29 ABC
197
254
34 BBC
-18 ATC
196
244
-13 BTC
25 ABC
192
19 BTC
73 ABC
272
29 BBC
-11 ATC
198
65 BBC
43 ATC
291
-11 BTC
24 ABC
200
70 BTC
73 ABC
273
28 BBC
-15 ATC
200
59 BBC
34 ATC
273
-17 BTC
29 ABC
192
15 BTC
78 ABC
273
31 BBC
-12 ATC
199
65 BBC
38 ATC
281
-6 BTC
21 ABC
194
24 BTC
66 ABC
270
29 BBC
-5 ATC
194
59 BBC
31 ATC
270
-22 BTC
26 ABC
184
22 BTC
70 ABC
272
12 BBC
-8 ATC
189
45 BBC
40 ATC
265
27 BBC
-15 ATC
192
58 BBC
31 ATC
269
-13 BTC
16 ABC
183
17 BTC
60 ABC
257
Cam
Lift
.266
.254
.254
.252
.252
.265
.265
.240
.240
.405
.405
.371
.220
.232
.232
.244
.244
.253
.277
.262
.262
.247
.250
.252
.252
.247
.249
.260
.260
.230
.238
.247
.237
Gross
Valve Lift
.425
.406
.406
.443
.403
.424
.424
.360
.360
.405
.405
44 BBC
-17 BTC
-15 BTC
38 BBC
69 BBC
25 BTC
-14 BTC
34 BBC
-14 BTC
34 BBC
-14 BTC
47 BBC
-5 BTC
35 BBC
-23 BTC
40 BTC
-12 BTC
30 BBC
34 BBC
-8 BTC
.283
.278
.260
.278
.229
.225
.240
.241
.240
.241
.278
.283
.264
.264
.237
.238
.265
.265
.239
.239
.481
.472
.416
.443
.389
.382
.408
.409
.408
.409
.445
.453
.396
.396
.379
.380
.424
.424
.382
.382
-3 ABC
43 ABC
32 ABC
-9 ATC
27 ATC
71 ABC
19 ABC
-13 ATC
19 ABC
-13 ATC
40 ABC
-6 ATC
32 ABC
-8 ATC
30 ABC
-31 ATC
24 ABC
-18 ATC
-14 ATC
28 ABC
221
206
197
209
193
185
185
201
185
201
206
221
207
207
187
189
192
192
200
200
81 BBC
16 BTC
18 BTC
71 BBC
64 BBC
21 BTC
14 BTC
70 BBC
14 BTC
70 BBC
18 BTC
82 BBC
4 BTC
70 BBC
20 BTC
62 BBC
63 BBC
21 BTC
48 ATC
91 ABC
82 ABC
42 ATC
27 ATC
70 ABC
72 ABC
25 ATC
72 ABC
25 ATC
85 ABC
42 ATC
64 ABC
-1 ATC
70 ABC
28 ATC
26 ATC
68 ABC
307
287
280
293
275
259
266
275
266
275
283
304
274
274
248
249
274
288
269
269
.225
.229
.406
.406
.414
.414
.442
.485
.366
.366
.419
.425
.428
.428
.432
.435
.416
.416
.368
.380
.395
.379
112
HYD
109
HYD
111
HYD
115
HYD
113
HYD
114
HYD
110
HYD
113
1.5
0.016
109
0.018
110
1.0
MECH
110
MECH
0.018
0.012
112
1.75
HYD
114
HYD
106
1.7
HYD
114
HYD
110
1.75
HYD
116
HYD
110
1.4
0.018
116
0.018
109
1.7
HYD
111
HYD
108
HYD
111
HYD
113
1.75
HYD
111
HYD
103
1.6
HYD
112
HYD
114
HYD
104
HYD
111
HYD
104
HYD
110
120
114
114
117
106
106
114
106
114
117
113
108
112
106
116
108
114
114
108
1.7
1.6
1.7
1.6
1.5
1.6
1.7
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
0.016
0.014
HYD
HYD
HYD
HYD
HYD
HYD
HYD
Part
No.
SYB-43
SYB-44
SYB-45
SYB-46
SYB-47
SYB-48
SYB-49
SYB-50
SYB-51
SYB-8
SYB-9
TSC-1
TSC-5
TSC-6
TSC-7
TSC-8
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
SAE Specs@
Closes Duration
Opens
Closes
Duration Opens
27 BBC
-15 ATC
192
61 BBC
33 ATC
274
-12 BTC
16 ABC
184
20 BTC
64 ABC
264
16 BTC
36 ABC
208
275
45 BBC
7 ATC
208
275
30 BBC
14 ATC
190
244
19 BTC
25 ABC
190
244
25 BBC
19 ATC
190
191
14 BTC
30 ABC
190
191
14 BTC
30 ABC
190
258
25 BBC
19 ATC
190
258
190
202
35 BBC
9 ATC
203
270
12 BTC
32 ABC
203
270
18 BTC
30 ABC
199
272
37 BBC
11 ATC
199
272
40 BBC
10 ATC
210
279
10 BTC
40 ABC
210
279
-15 BTC
21 ABC
186
19 BTC
71 ABC
270
26 BBC
-20 ATC
186
60 BBC
30 ATC
270
-10 BTC
17 ABC
187
18 BTC
63 ABC
261
26 BBC
-19 ATC
187
54 BBC
27 ATC
261
224
212
244
191
191
Cam
Lift
.247
.237
.265
.265
.240
.240
.240
.240
.240
.240
.239
.250
.263
.263
.260
.260
.278
.278
.232
.232
.238
.238
.264
.262
.197
.197
Gross
Valve Lift
.419
.402
.424
.424
.398
.398
.398
.398
.384
.384
.375
.392
.423
.423
.419
.419
.445
.445
.394
.394
.380
.380
.396
.393
111
HYD
104
HYD
111
1.6
HYD
121
HYD
116
HYD
108
HYD
111
HYD
113
HYD
113
HYD
111
HYD
113
1.57
HYD
113
HYD
111
1.6
HYD
111
HYD
110
HYD
118
HYD
115
HYD
115
HYD
108
1.7
HYD
113
HYD
103
1.6
HYD
113
HYD
1.5
0.014
0.012
0.008
141
Part
No.
20402
21206
21300
22100
22107
22108
22109
22110
22111
22113
22114
22115
22116
22117
22118
22119
22120
22121
22123
22124
22125
22126
22127
22128
22129
22131
22200
22201
22203
22204
142
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
10 BTC
44 ABC
234
42 BTC
84 ABC
306
59 BBC
5 ATC
244
91 BBC
45 ATC
316
49 BBC
5 BTC
224
82 BBC
38 ATC
300
5 TDC
39 ABC
224
38 BTC
82 ABC
300
59 BBC
5 ATC
244
91 BBC
45 ATC
316
10 BTC
44 ABC
234
42 BTC
84 ABC
306
11 ATC
23 ABC
192
25 ATC
20 ABC
268
37 BBC
14 BTC
203
68 BBC
69 ATC
278
208
280
208
280
194
270
184
260
204
278
7 ATC
21 ABC
194
26 BTC
64 ABC
270
8 ATC
32 ABC
204
24 BTC
74 ABC
278
214
288
204
278
194
270
7 ATC
21 ABC
194
26 BTC
64 ABC
270
204
278
208
280
208
280
210
283
216
286
18 ATC
28 ABC
190
26 BTC
71 ABC
277
25 BBC
15 BTC
190
69 BBC
28 ATC
277
8 ATC
32 ABC
204
24 BTC
76 ABC
280
36 BBC
12 BTC
204
68 BBC
32 ATC
280
26 BBC
14 BTC
192
75 BBC
35 ATC
290
17 ATC
29 ABC
192
32 BTC
78 ABC
290
41 BBC
8 BTC
213
70 BBC
34 ATC
284
7 ATC
29 ABC
202
21 BTC
70 ABC
271
7 ATC
29 ABC
202
21 BTC
70 ABC
271
41 BBC
8 BTC
213
70 BBC
34 ATC
284
9 ATC
31 ABC
202
17 BTC
72 ABC
269
37 BBC
10 BTC
207
63 BBC
28 ATC
271
10 ATC
33 ABC
203
18 BTC
73 ABC
271
41 BBC
7 BTC
214
69 BBC
36 ATC
285
37 BBC
4 BTC
213
65 BBC
38 ATC
283
7 ATC
29 ABC
202
20 BTC
71 ABC
271
37 BBC
4 BTC
213
65 BBC
38 ATC
283
7 ATC
29 ABC
202
20 BTC
71 ABC
271
194
268
214
288
190
261
202
272
210
273
214
277
9 BTC
27 ABC
198
27 BTC
66 ABC
273
45 BBC
-11 ATC
210
78 BBC
78 ATC
288
-1 BTC
31 ABC
210
36 BTC
72 ABC
288
41 BBC
-6 ATC
215
72 BBC
32 ATC
284
1 BTC
41 ABC
222
30 BTC
80 ABC
290
49 BBC
7 BTC
222
78 BBC
32 ATC
290
223
291
223
291
224
298
0 TDC
34 ABC
214
32 BTC
76 ABC
288
0 TDC
34 ABC
214
34 BTC
78 ABC
292
Cam
Lift
.325
.339
310
.310
.339
.325
.234
.253
.272
.272
.265
.245
.280
.265
.280
.295
.281
.265
.265
.288
.280
.280
.290
.303
.232
.232
.253
.253
.230
.230
.276
.269
.269
.276
.269
.276
.273
.273
.273
.267
.273
.267
.265
.294
.258
.273
.319
.325
.434
.462
.462
.469
.298
.298
.333
.333
.310
.295
.295
Gross
Valve Lift
.520
.542
.496
.496
.542
.520
.398
.430
.408
.408
.398
.388
.420
.398
.420
.443
.422
.398
.398
.420
.420
.420
.435
.455
.406
.406
.443
.443
.403
.403
.414
.404
.404
.414
.404
.414
.410
.410
.410
.401
.410
.401
.398
.441
.439
.464
.478
.487
.502
.496
.463
.470
.447
.447
.566
.566
.465
.443
.502
107
1.6
HYD.
117
HYD.
117
HYD.
107
HYD.
117
HYD.
107
HYD.
107
1.7
HYD.
117
HYD.
107
1.5
HYD.
113
HYD.
104
HYD.
104
HYD.
104
HYD.
104
HYD.
110
HYD.
110
HYD.
117
HYD.
107
HYD.
104
HYD.
117
HYD.
116
HYD.
106
HYD.
107
HYD.
117
HYD.
113
1.75
HYD
110
HYD
109
HYD.
115
HYD.
110
HYD.
113
HYD.
116
1.5
HYD.
108
HYD.
108
HYD.
116
HYD.
110
HYD.
114
HYD.
111
HYD.
115
HYD.
112
HYD.
108
HYD.
112
HYD.
108
HYD.
107
HYD.
117
HYD.
106
1.7
HYD.
114
HYD.
107
HYD.
117
HYD.
108
1.5
HYD
116
HYD
106
HYD
114
HYD
110
HYD.
118
HYD.
118
1.7
HYD.
110
HYD
117
1.5
HYD.
107
HYD.
107
1.7
HYD.
Part
No.
22210
22213
22214
22215
22216
22217
22218
22219
22220
22221
22222
22223
22230
22232
22233
22234
22280
22296
22297
22298
22301
22302
22303
22304
22305
22306
22320
22385
22396
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
49 BBC
5 BTC
224
83 BBC
39 ATC
302
46 BBC
2 BTC
224
75 BBC
32 ATC
287
3 ATC
47 ABC
224
27 BTC
84 ABC
291
214
288
214
288
2 ATC
36 ABC
214
32 BTC
80 ABC
292
46 BBC
12 BTC
214
80 BBC
32 ATC
292
220
295
2 BTC
38 ATC
220
32 BTC
83 ABC
295
49 BBC
11 BTC
218
86 BBC
37 ATC
302
4 ATC
38 ABC
214
29 BTC
81 ABC
289
4 ATC
39 ABC
215
28 BTC
81 ABC
289
49 BBC
10 BTC
219
86 BBC
36 ATC
301
49 BBC
10 BTC
219
86 BBC
36 ATC
301
4 ATC
39 ABC
215
28 BTC
81 ABC
289
48 BBC
4 BTC
224
80 BBC
34 ATC
293
3 ATC
47 ABC
224
29 BTC
85 ABC
293
48 BBC
4 BTC
224
80 BBC
34 ATC
293
3 ATC
47 ABC
224
29 BTC
85 ABC
293
197
261
36BBC
-10ATC
206
64BBC
62ABC
276
41 BBC
-8 ATC
213
70 BBC
36 ATC
286
-7 BTC
29 ABC
202
22 BTC
70 ABC
272
224
224
214
287
214
287
220
304
231
287
224
300
224
300
224
283
230
291
224
287
220
283
57 BBC
2 BTC
235
95 BBC
47 ATC
322
0 TDC
42 ABC
222
33 BTC
93 ABC
306
50 BBC
-2 ATC
228
86 BBC
34 ATC
300
0 BTC
36 ABC
216
36 BTC
72 ABC
288
55 BBC
-3 ATC
232
89 BBC
38 ATC
307
2 BTC
40 ABC
222
36 BTC
81 ABC
297
46 BBC
4 ATC
230
72 BBC
35 ATC
287
8 BTC
42 ABC
230
34 BTC
73 ABC
287
49 BBC
1 ATC
230
82 BBC
47 ATC
309
9 BTC
41 ABC
230
42 BTC
87 ABC
309
5 BTC
39 ABC
224
37 BTC
81 ABC
298
54 BBC
0 TDC
234
85 BBC
39 ATC
304
232
308
234
308
59 BBC
5 ATC
244
90 BBC
43 ATC
316
10 BTC
44 ABC
234
41 BTC
82 ABC
303
9 BTC
41 ABC
230
36 BTC
86 ABC
302
49 BBC
1 ATC
230
87 BBC
40 ATC
307
3 BTC
47 ABC
230
34 BTC
90 ABC
304
51 BBC
1 ATC
230
82 BBC
42 ATC
304
237
245
12 BTC
50 ABC
242
41 BTC
88 ABC
309
60 BBC
2 ATC
242
83 BBC
32 ATC
295
Cam
Lift
.310
.307
.300
.295
.295
.295
.295
.286
.286
.282
.271
.272
.283
.283
.272
.300
.300
.300
.300
.289
.300
.273
.269
.284
.284
.296
.296
.312
.320
.291
.291
.320
.324
.335
.330
.297
.294
.510
.501
.500
.478
.320
.320
.302
.302
.310
.325
.325
.325
.339
.325
.311
.325
.302
.302
.368
.376
.306
.306
Gross
Valve Lift
.527
.461
.450
.443
.443
.502
.502
.429
.429
.480
.461
.462
.481
.481
.462
.510
.510
.510
.510
.433
.450
.409
.403
.483
.483
.444
.444
.468
.480
.437
.437
.480
.486
.502
.495
.505
.500
.532
.509
.510
.501
.480
.480
.513
.513
.465
.488
.487
.487
.509
.488
.529
.553
.453
.453
.625
.639
.520
.520
117
HYD.
114
1.5
HYD.
114
HYD.
107
HYD.
117
HYD.
109
1.7
HYD.
119
HYD.
112
1.5
HYD.
108
HYD.
120
1.7
HYD.
110
HYD.
110
HYD.
120
HYD.
120
HYD.
110
HYD.
117
HYD.
114
HYD.
117
HYD.
114
HYD.
105
1.5
HYD
114
HYD
116
HYD
108
HYD
113
1.7-1
Hyd
118
Hyd
105
1.5
HYD
115
HYD
106
HYD
114
HYD
109
HYD
107
HYD
107
HYD
113
HYD
113
HYD
107
HYD
120
1.7
HYD.
110
HYD.
116
HYD
108
HYD
119
1.5
HYD
109
HYD
111
HYD.
107
HYD.
114
1.7
HYD.
106
HYD.
107
1.5
HYD.
117
HYD.
106
HYD
110
HYD
117
HYD.
107
HYD.
110
1.7
HYD.
118
HYD.
112
1.5
HYD.
116
HYD.
109
1.7
HYD
115
HYD
108
.020
120
.024
143
Part
No.
22397
22398
22400
22401
22402
22404
22407
22408
22410
22415
22427
22450
22460
22470
22471
22472
22480
22485
23103
23104
23123
23203
23204
23301
23302
23401
24106
24107
24108
24111
144
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
10 BTC
44 ABC
234
37 BTC
79 ABC
296
56 BBC
2 ATC
238
83 BBC
37 ATC
300
56 BBC
2 ATC
238
83 BBC
37 ATC
300
10 BTC
44 ABC
234
37 BTC
79 ABC
296
70 BBC
20 ATC
270
88 BBC
44 ATC
312
19 BTC
58 ABC
257
40 BTC
84 ABC
304
15 BTC
49 ABC
244
46 BTC
88 ABC
314
63 BBC
11 ATC
254
95 BBC
53 ATC
328
14 BTC
46 ABC
240
32 BTC
68 ABC
280
52 BBC
18 ATC
250
70 BBC
42 ATC
290
29 BTC
47 ABC
258
44 BTC
63 ABC
290
63 BBC
21 ATC
266
78 BBC
37 ATC
298
16 BTC
54 ABC
250
39 BTC
82 ABC
294
64 BBC
16 ATC
260
82 BBC
42 ATC
306
24 ATC
64 ABC
268
52 BTC
93 ABC
325
72 BBC
24 ATC
276
96 BBC
49 ATC
325
64 BBC
10 ATC
254
84 BBC
31 ATC
295
16 BTC
58 ABC
254
36 BTC
79 ABC
295
10 BTC
52 ABC
242
33 BTC
82 ABC
295
68 BBC
6 ATC
254
94 BBC
34 ATC
308
70 BBC
20 ATC
270
91 BBC
49 ATC
320
22 BTC
62 ABC
264
46 BTC
96 ABC
322
21 BTC
61 ABC
262
42 BTC
87 ABC
309
71 BBC
22 ATC
273
90 BBC
48 ATC
318
246
302
246
302
266
297
255
287
246
311
240
305
54 BBC
11 ATC
245
92 BBC
37 ATC
329
6 BTC
51 ABC
237
49 BTC 106 ABC
335
246
310
241
305
12 BTC
44 ABC
236
52 BTC
84 ABC
316
57 BBC
9 ATC
246
96 BBC
48 ATC
324
27 BBC
8 BTC
199
61 BBC
41 ATC
282
15 ATC
33 ABC
198
16 BTC
82 ABC
278
15 ATC
33 ABC
198
16 BTC
82 ABC
278
27 BBC
8 BTC
199
61 BBC
41 ATC
282
36 BBC
12 BTC
204
68 BBC
30 ATC
278
4 ATC
28 ABC
204
28 BTC
70 ABC
278
0 TDC
34 ABC
214
32 BTC
76 ABC
288
49 BBC
5 BTC
224
81 BBC
37 ATC
298
49 BBC
5 BTC
224
81 BBC
37 ATC
298
0 TDC
34 ABC
214
32 BTC
76 ATC
288
8 BTC
43 ABC
231
32 BTC
75 ABC
287
46 BBC
5 ATC
231
70 BBC
37 ATC
287
7 BTC
43 ABC
230
37 BTC
83 BTC
300
45 BBC
5 ATC
230
75 BBC
45 ATC
300
12 BTC
50 ABC
242
42 BTC
90 ABC
312
54 BBC
18 ATC
252
84 BBC
56 ATC
320
12 ATC
16 ABC
184
18 BTC
61 ABC
258
28 BBC
16 BTC
192
59 BBC
32 ATC
270
38 BBC
9 BTC
209
70 BBC
42 ATC
292
14 ATC
32 ABC
198
18 BTC
82 ABC
280
190
208
284
Cam
Lift
.537
.514
.514
.537
.341
.329
.340
.355
.347
.347
.360
.372
.356
.376
.382
.394
.394
.323
.305
.322
.341
.329
.341
.357
.339
.339
Gross
Valve Lift
.528
.528
.500
.478
.512
.494
.510
.533
.520
.520
.540
.558
.576
.639
.649
.670
.485
.485
.458
.484
.580
.559
.512
.536
.509
.509
107
1.5
HYD
117
HYD
117
HYD
107
HYD
116
.024
108
.022
107
HYD.
117
HYD.
106
.026
106
.026
99
.026
111
.026
108
1.7
.022
116
.026
112
.022
108
.026
118
1.5
.030
110
.030
110
.020
122
.025
116
1.7
.026
108
.022
108
1.5
.022
116
.024
112
HYD
106
HYD
.337
.329
.639
.625
.336
.329
.561
.578
.274
.273
.273
.274
.280
.280
.295
.310
.310
.295
.320
.320
.320
.320
.347
.367
.238
.247
.278
.260
0.257
.572
.559
.480
.480
.572
.559
.435
.462
.411
.410
.410
.411
.420
.420
.443
.465
.465
.443
.480
.480
.480
.480
.520
.550
.381
.395
.445
.416
0.412
114
110
115
109
114
110
106
114
108
114
114
108
114
106
107
117
117
107
107
111
107
111
108
110
103
111
114
114
106
.280
.484
107
1.7
1.5
1.6
1.73
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD.
HYD
Part
No.
24203
24204
24205
24206
24207
24209
24210
24211
24212
24213
24218
24224
24225
24226
24227
24280
24301
24302
24303
24305
24401
24406
25211
25309
25310
26204
26303
26308
27101
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
INT.
EXH.
INT.
EXH.
EXH.
INT.
INT.
EXH.
EXH.
INT.
SAE Specs@
Opens
Closes
Duration Opens
Closes Duration
208
284
0 TDC
34 ABC
214
33 BTC
77 ABC
290
224
300
0 TDC
34 ABC
214
34 BTC
78 ABC
292
49 BBC
5 BTC
224
83 BBC
39 ATC
302
49 BBC
5 BTC
224
83 BBC 39 ATCC
302
0 TDC
34 ABC
214
34 BTC
78 ABC
292
0 TDC
34 ABC
214
34 BTC
79 ABC
293
49 BBC
5 BTC
224
83 BBC
40 ATC
303
5 BTC
39 ABC
224
39 BTC
84 ABC
303
54 BBC
0 TDC
234
87 BBC
41 ATC
308
13 ATC
40 ABC
207
17 BTC
85 ABC
282
47 BBC
6 BTC
221
83 BBC
41 ATC
304
224
300
234
305
5 BTC
39 ABC
224
37 BTC
81 ABC
298
54 BBC
0 TDC
234
85 BBC 39 ATCC
304
3 BTC
35 ABC
218
38 BTC
80 ABC
298
218
298
50 BBC
10 BTC
220
88 BBC
42 ATC
310
1 ATC
37 ABC
216
37 BTC
89 ABC
306
0 TDC
43 ABC
223
36 BTC
91 ABC
307
44 BBC
1 BTC
223
80 BBC
47 ATC
307
49 BBC
10 BTC
219
87 BBC
41 ATC
308
1 BTC
38 ABC
219
39 BTC
89 ABC
308
49 BBC
11 BTC
218
80 ABC
34 ATC
298
3 BTC
35 ABC
218
38 BTC
84 ABC
298
212
289
222
300
222
300
232
309
220
286
223
292
230
288
230
288
7 BTC
43 ABC
230
39 BTC
85 ABC
304
45 BBC
5 ATC
230
77 BBC
47 ATC
304
54 BBC
0 TDC
234
86 BBC
41 ATC
307
5 BTC
39 ABC
224
39 BTC
82 ABC
307
227
298
234
302
17 BTC
47 ABC
244
38 BTC
72 ABC
290
54 BBC
20 ATC
254
79 BBC
41 ATC
300
15 BTC
49 ABC
244
47 BTC
90 ABC
317
63 BBC
11 ATC
254
95 BBC
53 ATC
328
49 BBC
5 BTC
224
82 BBC
38 ATC
300
0 TDC
34 ABC
214
33 BTC
77 ABC
290
244
314
244
314
232
329
232
329
214
288
224
298
236
310
224
297
231
304
240
315
224
N/A
214
N/A
Cam
Lift
.280
.295
.310
.295
.310
.310
.295
.296
.311
.311
.325
.278
.283
.311
.325
.310
.325
.288
.288
.290
.285
.292
.292
.292
.292
.288
.288
.307
.318
.318
.332
.320
.320
.320
.320
.320
.320
.325
.311
.325
.325
.329
.341
.340
.355
.310
.295
0.297
.275
.267
Gross
Valve Lift
.484
.472
.496
.510
.536
.536
.510
.518
.544
.544
.569
.445
.453
.498
.520
.496
.520
.461
.461
.502
.493
.514
.514
.505
.505
.461
.461
.491
.509
.509
.532
.512
.512
.512
.512
.554
.554
.562
.538
.520
.520
.569
.590
.595
.621
.496
.472
.474
.474
.443
.465
.407
.407
.470
.470
.429
.416
115
HYD
107
1.6
HYD.
117
HYD
107
1.73
HYD.
117
HYD.
117
HYD.
107
HYD.
107
1.75
HYD.
117
HYD.
107
HYD.
117
HYD.
117
1.6
HYD.
113
HYD.
107
HYD
117
HYD
107
HYD.
117
HYD.
107
HYD.
119
HYD
120
1.73
HYD.
109
HYD.
110
1.76
HYD.
114
HYD.
120
1.73
HYD.
108
HYD.
119
1.6
HYD.
107
HYD.
107
HYD
117
HYD
107
HYD
117
HYD
109
HYD
115
HYD
111
HYD
107
HYD
107
1.73
HYD.
111
HYD.
117
HYD.
107
HYD.
107
1.6
HYD
117
HYD
104
1.73
.026
108
.026
107
1.75
.026
117
.026
117
1.6
HYD.
107
HYD.
110
HYD.
110
HYD.
112
114
107
117
119
112
112
115
115
1.56
.012
105
.012
145
Part
No.
27201
146
EXH.
INT.
SAE Specs@
Closes Duration
Opens
Closes
Duration Opens
234
N/A
224
N/A
Cam
Lift
.283
.275
Gross
Valve Lift
.442
.429
115
.012
105
.012
NUMERICAL LISTING
ABBREVIATIONS USED TO
INDICATE CAR AND TRUCK MANUFACTURERS
HUMMER
JAGU:
JAGUAR
PERFORMANCE - ISUZU
JEEP:
JEEP
ACUR:
ACURA
JOHN:
JOHN DEERE TRACTOR
ALFA:
ALFA ROMEO
KAIS:
KAISER
ALLT:
ALLIS CHALMERS LIFT TRUCK
KIA:
KIA
ALTR:
ALLIS CHALMERS TRACTOR
LEXU:
LEXUS
AMC:
AMERICAN MOTORS
MAZD:
MAZDA
AMC:
PERFORMANCE - AMERICAN MOTORS & JEEP
MENZ:
MERCEDES BENZ
AUDI:
AUDI
MERC:
MERCURY (INC. LINCOLN)
BMW:
BMW
MERC:
MERCURY MARINE
BUIC:
BUICK
MGGB:
MG
BUIC:
PERFORMANCE - BUICK
MINN:
MINNEAPOLIS-MOLINE
CADL:
CADILLAC
MITS:
MITSUBISHI
CASE:
CASE TRACTOR
NISS:
NISSAN/DATSUN
CATP:
CATERPILLAR
OLDS:
OLDSMOBILE
CHEV:
CHEVROLET
OLDS:
PERFORMANCE - OLDSMOBILE
CHEV:
PERFORMANCE - CHEVROLET CARS & TRUCKS
OLTR:
OLIVER TRACTOR
CHYL:
CHRYSLER
OMC:
OMC
CHYL:
PERFORMANCE - CHRYSLER PRODUCTS
OPEL:
OPEL
CHYL:
CHRYSLER MARINE
PERK:
PERKINS
CHYU:
CHRYLSER-INDUSTRIAL
PEUG:
PEUGEOT
CONT:
CONTINENTAL
PLYM:
PLYMOUTH
CUMM:
CUMMINS
PONT:
PONTIAC
DAEW:
DAEWOO
PONT:
PERFORMANCE - PONTIAC
DAIH:
DAIHATSU
PORS:
PORSCHE
DESO:
DESOTO
RENL:
RENAULT
DETD:
DETROIT DIESEL
REO:
REO
DODG:
DODGE
ROVE:
ROVER
DODT:
DODGE TRUCK
SAAB:
SAAB
EAGL:
EAGLE
SATU:
SATURN
FORD:
FORD
STUD:
STUDEBAKER
FORD:
PERFORMANCE - FORD PRODUCTS & TRUCKS
SUBU:
SUBARU
FORD:
FORD MARINE
SUZI:
SUZUKI
FOTR:
FORD TRUCK
TOY:
SPORT COMPACT PERFORMANCE - TOYOTA
FOTT:
FORD TRACTOR
FOTU:
FORD INDUSTRIAL
TOYO:
TOYOTA
GMC:
GMC/CHEVY TRUCKS
TRIU:
TRIUMPH
HENR:
HENRY-J
VOLK:
VOLKSWAGEN
HERC:
HERCULES
VOLV:
VOLVO
HOND:
HONDA
WAUK:
WAUKESHA
HYUN:
HYUNDAI
WHIT:
WHITE TRUCK
IHC:
I.H.C. TRUCK
WHTR:
WHITE PDQ TRUCKS
IHCT:
I.H.C. TRACTOR & POWER UNITS
WISC:
WISCONSIN
INFI:
INFINITI
YUGO:
YUGO
ISUZ:
ISUZU
Part No.
CARS & TRUCKS
Application
Part No.
OIL PUMP - PERFORMANCE
10176
10190
FORD - 281 (1996-04)
CHYL - 122 (1995-05)
10227
FORD - 281 (1996-04)
10295
CHEV, PONT, - 293, 323, 325, 350, 364 (1997-07)
10296
CHEV, PONT, - 293, 323, 325, 350, 364 (1997-07)
Application
OIL PUMP - PERFORMANCE (Cont.)
10342
CHYL - 345, 370 (2003-07)
10355
CHEV, PONT - 325, 350, 364, 378 (1997-07)
10540
PONT - 301, 326, 350, 389, 400, 421, 428, 455
(1959-81)
10541
PONT - 301, 326, 350, 389, 400, 421, 428, 455
(1959-81)
147
NUMERICAL LISTING
Part No.
Application
OIL PUMP - PERFORMANCE (Cont.)
10550
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
Part No.
OIL PUMP SCREEN ASSEMBLIES - PERFORMANCE
12557
10551
12558
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
12559
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
12564
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
12566
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
12702
10555C
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
20402
AMC - 290, 304, 343, 360, 390, 401 (1967-79)
400 (1957-02)
21300
BUIC - 231 (1977-87)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
22100
CHEV - 396, 400, 402, 427, 454 (1965-97)
400 (1957-02)
22107
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
10687
FORD - 260, 289, 302 (1962-01)
10688
FORD - 260, 289, 302 (1962-01)
10770
CHEV - 396, 400, 402, 427, 454 (1965-97)
10774
CHEV - 396, 400, 402, 427, 454 (1965-97)
10775
CHEV - 396, 400, 402, 427, 454 (1965-97)
10778
CHEV - 396, 400, 402, 427, 454 (1965-97)
10778C
CHEV - 396, 400, 402, 427, 454 (1965-97)
10832
FORD - (1969-97)
10833
FORD - (1969-97)
10990
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
10990C
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
10050-700CT
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
10050-750SS
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
10050-825SS
CHEV - 396, 400, 402, 427, 454 (1965-97)
CAMSHAFTS - PERFORMANCE
400 (1957-02)
10555
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
400 (1957-02)
10554
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
400 (1957-02)
10553
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
400 (1957-02)
10552C
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
400 (1957-03)
10552
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
400 (1957-03)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
Application
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
(1957-02)
22108
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
22109
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
22110
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
22111
CHEV - 305, 327, 350, 400 (1962-02)
22113
CHEV - (1985-03)
22114
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
22115
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
22116
MERC, OMC - 153
22117
MERC, OMC - 181
22118
MERC, OMC - 250
22119
GMC, MERC - 262 (1991)
22120
MERC - 262
22121
MERC - 262
22123
MERC - 262
22124
MERC, OMC - 283, 305, 307, 327, 350
10070-800SS
CHEV - 396, 400, 402, 427, 454 (1965-97)
10070-900SS
CHEV - 396, 400, 402, 427, 454 (1965-97)
22125
MERC, OMC - 283, 305, 307, 327, 350
M-22FHV
BUIC, CADL, CHEV, GMC, OLDS, PONT, OLDS -
22126
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
260, 307, 330, 350, 394, 400, 403, 425, 455
(1957-02)
(1959-90)
22127
CHEV - 396, 400, 402, 427, 454 (1965-97)
M-57B
FORD, MERC, FORD - 390, 428 (1961-71)
22200
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
M-57HV
FORD, FOTU, FOTR, MERC, FORD - 330, 332,
352, 360, 361, 383, 390, 410, 427, 428, 430, 462
400 (1957-02)
22203
(1978)
M-63HP
M-63HV
(1957-02)
CHYL, DESO, DODG, DODT, PLYM, CHYL,
22204
CHEV - 396, 400, 402, 427, 454 (1965-97)
CHYL - 350, 361, 383, 400, 413, 426, 440 (1979)
22210
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
CHYL, DESO, DODG, DODT, PLYM, CHYL,
CHYL - 350, 361, 383, 400, 413, 426, 440 (1979)
M-72HV
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
400 (1957-02)
22213
CHYL, DODG, DODT, JEEP, PLYM, CHYL, CHYL
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
- 239, 273, 318, 340, 360 (2003)
22214
CHEV - 396, 400, 402, 427, 454 (1965-97)
M-84AHV
FORD, FOTR, MERC, FORD - 351, 400 (1970-82)
22215
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
M-99HV-S
CHEV, CHEV - 262, 267, 283, 302, 305, 307, 327,
350, 400 (1957-03)
148
(1957-02)
22216
MERC - 427, 454
NUMERICAL LISTING
Part No.
Application
Part No.
CAMSHAFTS - PERFORMANCE (Cont.)
22217
MERC - 427, 454
22218
MERC - 427, 454
22219
MERC - 427, 454, 502
22220
MERC - 427, 454
22221
CHEV, MERC - 305, 350 (2002)
22222
MERC - 262
22223
MERC - 454, 502
22230
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22232
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22233
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22234
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22296
CHEV - 396, 400, 402, 427, 454 (1965-97)
22301
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22302
CHEV - 396, 400, 402, 427, 454 (1965-97)
22303
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22305
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22306
CHEV - 396, 400, 402, 427, 454 (1965-97)
22320
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22396
CHEV - 396, 400, 402, 427, 454 (1965-97)
22400
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22401
22402
25309
(1965-88)
OLDS - 260, 307, 350, 400, 403, 425, 455
25310
(1965-88)
OLDS - 260, 307, 350, 400, 403, 425, 455
26204
(1965-88)
PONT - 301, 326, 350, 389, 400, 421, 428, 455
26303
(1959-81)
PONT - 301, 326, 350, 389, 400, 421, 428, 455
26308
(1959-81)
PONT - 301, 326, 350, 389, 400, 421, 428, 455
27101
27201
MTA-1
(1959-81)
TOY - (1975-95)
TOY - (1975-95)
AMC, JEEP, AMC - 290, 304, 343, 360, 390, 401
MTB-1
(1966-93)
BUIC, CADL, CHEV, OLDS, PONT, BUIC - 181,
MTB-2
196, 231, 252 (1977-87)
MTC-1
196, 231, 252 (1977-87)
BUIC, CHEV, GMC, OLDS, PONT, CHEV - 262,
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22407
CHEV - 396, 400, 402, 427, 454 (1965-97)
22408
CHEV - 396, 400, 402, 427, 454 (1965-97)
22410
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22415
CHYL - 361, 383, 400, 413, 426 (1959-78)
CHYL - 361, 383, 400, 413, 426 (1959-78)
FORD, MERC - 289, 302, 351
FORD, MERC - 289, 302, 351
FORD - 260, 289, 302 (1962-01)
FORD - 351, 400 (1970-82)
FORD - 260, 289, 302 (1962-01)
FORD - 351, 400 (1970-82)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
FORD - 429, 460 (1968-97)
FORD - 429, 460 (1968-97)
FORD, MERC - 289, 302, 351
FORD - 260, 289 (1962-68)
FORD - (1969-97)
FORD - 260, 289, 302 (1962-01)
FORD - 429, 460
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
FORD - 351, 400 (1970-82)
FORD - (1969-97)
FORD - 260, 289, 302 (1962-01)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
FORD - 351, 400 (1970-82)
FORD - 260, 289, 302 (1962-01)
FORD - 351, 400 (1970-82)
FORD - 429, 460 (1968-97)
OLDS - 260, 307, 350, 400, 403, 425, 455
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22404
23302
23401
24106
24107
24108
24111
24203
24204
24205
24206
24207
24209
24210
24211
24212
24213
24218
24224
24225
24301
24302
24303
24305
24401
24406
25211
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22427
CHEV - 396, 400, 402, 427, 454 (1965-97)
22450
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22460
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22470
265, 267, 283, 302, 305, 307, 327, 350, 400
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
22471
CHEV - 396, 400, 402, 427, 454 (1965-97)
23103
CHYL - 273, 318, 340, 360
23104
CHYL - 273, 318, 340, 360
23123
CHYL - 273, 318, 340 (1965-02)
23203
CHYL - 273, 318, 340 (1965-02)
23204
CHYL - 361, 383, 400, 413, 426 (1959-78)
23301
CHYL - 273, 318, 340 (1965-02)
Application
MTC-5
(1955-02)
BUIC, CADL, CHEV, GMC, ISUZ, JEEP, OLDS,
MTC-6
PONT, CHEV - -, 173, 189 (1980-94)
CHEV, GMC, CHEV - 396, 400, 402, 427, 454
MTD-1
(1965-00)
CHYL, DODG, DODT, PLYM, CHYL - 273, 318,
MTD-2
340, 360 (1958-03)
400, 413, 426, 440 (1958-79)
149
NUMERICAL LISTING
Part No.
Application
MTF-1
FORD, FOTR, MERC, FORD - 260, 289, 302
Part No.
Application
CAMSHAFT LIFTER KITS - PERFORMANCE (Cont.)
32200
(1962-01)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
MTF-2
MTF-3
MTF-4
FORD, FOTR, MERC, FORD - 330, 352, 359, 360,
33103
CHYL - 361, 383, 413, 426 (1959-78)
361, 389, 390, 391, 406, 427, 428 (1958-78)
34206
FORD - 429, 460 (1968-97)
MTF-5
34211
FORD - (1969-97)
MTF-6
FORD, FOTR - 240, 300 (1965-96)
35309
OLDS - 260, 307, 350, 400, 403, 425, 455
MTO-1
BUIC, CADL, OLDS, PONT, OLDS - 260, 307,
350, 400, 403, 425, 455 (1965-90)
MTP-1
290114
CHEV - 173, 189 (1980-94)
298174
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
298404
299004
196, 231, 252 (1977-87)
CL-MTC-1
(1955-02)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
CHEV, PONT - 200, 229 (1978-84)
396, 400, 402, 427, 454 (1957-03)
CL-MTC-5
BUIC, CADL, CHEV, GMC, ISUZ, JEEP, OLDS,
PONT - -, 173, 189 (1980-94)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
CL-MTC-6
FORD - 260, 289, 302, 351, 400, 429, 460
FORD - 260, 289, 302, 351, 400, 429, 460
299144
FORD - 260, 289, 302 (1962-01)
299374
CHYL - 273, 318, 340, 361, 383, 400, 413, 426
299524
299694
CL-MTD-1
(1962-01)
(1959-02)
OLDS, PONT - 260, 307, 326, 350, 389, 400, 403,
CL-MTF-3
421, 428, 455 (1959-88)
CL-MTF-4
FORD, FOTR, MERC, FORD - 330, 352, 359, 360,
361, 389, 390, 391, 406, 427, 428 (1958-78)
OLDS, PONT - 326, 350, 389, 400, 421, 428, 455
(1959-80)
CL-MTF-5
BUIC, CHEV, PONT - 181, 231, 252, 301, 454
CL-MTO-1
BUIC, CADL, OLDS, PONT, OLDS - 260, 307,
BUIC, CHEV, PONT - 181, 231, 252, 301, 454
CHYL - 383, 400 (1959-78)
299774
CHYL - 400
299984
AMC - 290, 304, 343, 360, 390, 401 (1967-79)
CAMSHAFT LIFTER KITS - PERFORMANCE
32100
CHEV - 396, 400, 402, 427, 454 (1965-97)
32108
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
350, 400, 403, 425, 455 (1965-90)
CL-MTP-1
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
421, 428, 455 (1959-81)
V1367+3
466114
466124
150
CHEV - (1985-03)
FORD, OLDS - 260, 289, 302, 307, 350, 400, 403,
425, 455 (1962-01)
466134
FORD, OLDS - 260, 289, 302, 307, 350, 400, 403,
425, 455 (1962-01)
466154
CHEV, CHYL, FORD - 351, 361, 383, 396, 400,
402, 413, 426, 427, 454 (1959-97)
466164
400 (1957-02)
32113
CHEV, FORD - 260, 262, 267, 283, 289, 302, 305,
307, 327, 350, 400 (1957-02)
(1957-02)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
FORD, FOTR, MERC - 351, 400 (1971-82)
CHROME VANDIUM VALVE SPRINGS
(1957-02)
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
OLDS, PONT, PONT - 301, 326, 350, 389, 400,
STAINLESS STEEL ENGINE VALVES
(1957-02)
32111
FORD, FOTR, MERC, FORD - 260, 289, 302
CL-MTF-2
299764
32110
413, 440 (1959-78)
CL-MTF-1
(1970-97)
32109
340, 360 (1958-03)
CL-MTD-2
(1970-97)
299704
CHEV, GMC, CHEV - 396, 400, 402, 427, 454
(1965-00)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
(1962-01)
299514
BUIC, CHEV, GMC, OLDS, PONT, CHEV - 262,
265, 267, 283, 302, 305, 307, 327, 350, 400
(1962-01)
299014
CL-MTC-4
396, 400, 402, 427, 454 (1957-03)
298724
196, 231, 252 (1977-87)
CL-MTB-2
396, 400, 402, 427, 454 (1957-03)
298184
AMC, JEEP, AMC - 290, 304, 343, 360, 390, 401
(1966-93)
CL-MTB-1
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
290954
OLDS - 260, 307, 350, 400, 403, 425, 455
(1965-88)
CL-MTA-1
AMC, CHYL - 273, 290, 304, 318, 340, 343, 360,
390, 401 (1965-02)
290834
(1965-88)
35310
AMC, BUIC, CHEV, OLDS, PONT - 151 (1977-92)
LIFTERS - PERFORMANCE
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
BUIC, OLDS, PONT, PONT - 287, 301, 326, 350,
389, 400, 421, 428, 455 (1955-81)
MTP-2
32210
CHEV, CHYL, FORD - 351, 361, 383, 396, 400,
402, 413, 426, 427, 454 (1959-97)
466174
FORD - (1969-97)
NUMERICAL LISTING
Part No.
Application
Part No.
CHROME VANDIUM VALVE SPRINGS (Cont.)
466204
466224
CHROME MOLY PUSH RODS (Cont.)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
500274
PONT - 350, 389, 400, 455 (1959-77)
400 (1957-02)
500294
CHEV, MERC - 396, 400, 402, 427, 454 (1997)
CHEV, CHYL, FORD, MERC - 351, 352, 360, 361,
500304
CHEV, MERC - 396, 400, 402, 427, 454 (1997)
383, 390, 396, 400, 402, 406, 413, 426, 427, 428,
500314
AMC, CHEV, MERC, OMC - 229, 262, 267, 283,
302, 304, 305, 307, 327, 350, 360, 390, 400, 401
454 (1997)
466274
466354
466364
466434
466444
307, 327, 350, 400 (1957-02)
500334
CHYL, CHYL - 440 (1978)
CHEV, MERC, OMC - 262, 267, 283, 302, 305,
500354
CHYL - (1966-78)
307, 327, 350, 400 (2003)
500364
CHYL - 426 (1966-71)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
500374
CHYL - 426 (1966-71)
400 (1957-02)
500384
CHYL - 383 (1959-78)
AMC, CHYL - 273, 290, 304, 318, 340, 343, 360,
500394
FORD - (1969-97)
361, 383, 390, 400, 401, 413, 426 (1959-02)
500404
FORD, FORD, MERC, OMC - 260, 302 (1964)
FORD - 260, 289, 302 (1962-01)
500414
FORD - 302 (1968-01)
500424
FORD - 351 (1970-74)
500434
FORD - 351 (1970-74)
500444
FORD - 302 (1968-01)
500474
CHYL - 426 (1963-78)
500494
MERC, OMC - 153, 181, 250
500544
CHYL, CHYL - 440 (1978)
500564
OLDS - 400, 455 (1965-76)
500574
BUIC, PONT - 181, 231, 252, 326, 389, 400, 421,
CHYL, CHYL - 273, 318, 340, 360, 361, 383, 400,
413, 426, 440 (2002)
472004
FORD - 260, 289, 302, 400 (1962-01)
473004
AMC, CHEV, FORD, MERC - 290, 304, 343, 352,
360, 390, 396, 400, 401, 402, 406, 427, 428, 454
(1997)
474004
CHYL, CHYL - 273, 318, 340, 360, 361, 383, 400,
413, 426, 440 (2002)
476104
BUIC, CHEV, FORD, OLDS, PONT, FORD,
MERC, OMC - 153, 181, 224, 229, 231, 250, 252,
260, 262, 267, 283, 289, 301, 302, 305, 307, 326,
327, 350, 351, 389, 396, 400, 402, 403, 421, 425,
427, 428, 429, 45 (2003)
476704
FORD - 400 (1971-82)
GUIDE PLATES
MGP1004
CHYL, CHYL - 273, 318, 340, 360 (2002)
500614
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
500624
CHEV - 427 (1980-90)
500634
CHEV - 427 (1980-90)
500664
FORD - (1969-97)
500674
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
501004
MGP1064
CHEV - 396, 400, 402, 427, 454 (1965-97)
MGP1074
CHEV - 396, 400, 402, 427, 454 (1965-97)
MGP1084
FORD - 260, 289, 302 (1962-01)
MGP1094
FORD - 260, 289, 302 (1962-01)
MGP1104
FORD - 351 (1970-81)
MGP1114
FORD - 351 (1970-81)
MGP1124
FORD - 429, 460 (1968-97)
MGP1134
FORD - 429, 460 (1968-97)
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
500074
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
500154
CHEV, MERC - 396, 400, 402, 427, 454 (1997)
500164
CHEV, MERC - 396, 400, 402, 427, 454 (1997)
500194
CHYL - 426 (1963-78)
500204
CHYL - 440
500224
CHYL - 273 (1965-02)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
501034
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
VALVE SPRING WITH HYDRAULIC LIFTERS
466124
FORD, OLDS - 260, 289, 302, 307, 350, 400, 403,
425, 455 (1962-01)
466134
FORD, OLDS - 260, 289, 302, 307, 350, 400, 403,
425, 455 (1962-01)
466174
FORD - (1969-97)
466204
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
CHROME MOLY PUSH RODS
500064
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
501024
CHEV - 262, 267, 302, 305, 307, 327, 350, 400
(1962-02)
AMC, CHEV - 262, 267, 283, 302, 304, 305, 307,
327, 350, 360, 390, 400, 401 (1957-03)
501014
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
MGP1034
FORD, FORD - 260, 289, 302 (2001)
500594
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
MGP1024
428 (1959-87)
500584
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
MGP1014
(2003)
CHEV, FORD - 260, 262, 267, 283, 289, 302, 305,
VALVE LOCKS
471004
Application
400 (1957-02)
466224
CHEV, CHYL, FORD, MERC - 351, 352, 360, 361,
383, 390, 396, 400, 402, 406, 413, 426, 427, 428,
454 (1997)
466354
CHEV, MERC, OMC - 262, 267, 283, 302, 305,
307, 327, 350, 400 (2003)
466434
AMC, CHYL - 273, 290, 304, 318, 340, 343, 360,
361, 383, 390, 400, 401, 413, 426 (1959-02)
151
NUMERICAL LISTING
Part No.
Application
Part No.
VALVE SPRING WITH HYDRAULIC LIFTERS (Cont.)
FORD - 260, 289, 302 (1962-01)
466444
VALVE SPRING WITH MECHANICAL LIFTERS
466114
466154
3 PC SET (Cont.)
40410
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
40500
CHEV - 267, 283, 302, 305, 307, 327, 350, 400
(1957-02)
CHEV, FORD - 260, 262, 267, 283, 289, 302, 305,
307, 327, 350, 400 (1957-02)
CHEV, CHYL, FORD - 351, 361, 383, 396, 400,
40510
CHEV - 396, 400, 402, 427, 454 (1965-97)
40520
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
402, 413, 426, 427, 454 (1959-97)
466164
CHEV, CHYL, FORD - 351, 361, 383, 396, 400,
48500T-9
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
466274
CHEV, FORD - 260, 262, 267, 283, 289, 302, 305,
48500W-9
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
267, 283, 302, 305, 307, 327, 350, 400 (1955-03)
CHEV - 396, 400, 402, 427, 454 (1965-97)
451014
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
VALVES
400 (1957-02)
400 (1957-02)
VALVE SPRINGS
VS-2256
FORD, FOTR, MAZD, MERC - -, 182, 182, 183,
182,183 (1996-07)
ROCKER ARMS
498404
498464
498684
MRDS-1920
MRDS-2920
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
451044
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
CHEV - 396, 400, 402, 427, 454 (1965-97)
PONT - 301, 326, 350, 389, 400, 421, 428, 455
451064
CHEV - 396, 400, 402, 427, 454 (1965-97)
(1959-81)
451074
CHEV - 396, 400, 402, 427, 454 (1965-97)
CHEV - 396, 400, 402, 427, 454 (1965-97)
451084
CHEV - 396, 400, 402, 427, 454 (1965-97)
451094
FORD - 260, 289, 302 (1962-01)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
451104
FORD - 260, 289, 302 (1962-01)
400 (1957-02)
451114
FORD - 260, 289, 302 (1962-01)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
451124
FORD - 260, 289, 302 (1962-01)
400 (1957-02)
451134
FORD - 351 (1970-74)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
451144
FORD - 351 (1970-74)
400 (1957-02)
451154
FORD - (1969-97)
451194
FORD - 429, 460 (1968-97)
451204
FORD - 429, 460 (1968-97)
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-03)
CHYL - 273, 318 (1965-02)
40203
CHYL - 361, 383, 400, 413, 426 (1959-78)
40204
FORD - 352, 360, 390, 406, 427, 428 (1958-76)
40205
CHEV - 396, 400, 402, 427, 454 (1965-97)
40206
FORD - 260, 289, 302 (1962-01)
40210
BUIC - 350 (1972-81)
40217
CHYL, CHYL - 426, 440 (1978)
40400
CHEV, MERC, OMC - 229, 262, 267, 283, 302,
305, 307, 327, 350, 400 (2003)
40401
CHEV, MERC - 396, 400, 402, 427, 454 (1997)
40402
FORD, FORD, MERC, OMC - 260, 289, 302, 351
(1997)
40403
FORD, FORD - 429, 460 (1997)
40404
BUIC - 181, 231, 252 (1977-87)
40405
FORD - 351, 400 (1970-82)
40406
CHYL, CHYL - 273, 318, 340, 360 (2002)
40407
CHYL, CHYL - 361, 383, 400, 413, 426, 440 (1978)
40408
PONT - 326, 350, 389, 400, 421, 428, 455
(1959-77)
152
400 (1957-02)
451034
451054
40202
40409
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
400 (1957-02)
3 PC SET
40201
451024
CHEV - 262, 267, 283, 302, 305, 307, 327, 350,
ROCKER ARM STUD
MRDS-941
BUIC, CHEV, OLDS, PONT - 200, 229, 262, 265,
48510T-9
307, 327, 350, 400 (1957-02)
466364
BUIC, CHEV, OLDS, PONT - 200, 229, 262, 265,
267, 283, 302, 305, 307, 327, 350, 400 (1955-03)
402, 413, 426, 427, 454 (1959-97)
466204
Application
OLDS - 260, 400, 403, 425, 455 (1965-82)
Oil Pump Screens
54-DS
55-S1
55-S2
55-S3
68-S
68-S3
68-S4
68-S5
83-S
83-S1
210S
220S
241S
303S
304S
305S
324S
331S
335S
12557
12558
12559
12564
12566
155

M Select 2008 oil pump final

Transcription

Similar documents

performance oil pumps - Melling Select Performance

D - Melling

View Nickels Catalog - Nickels Performance