txpit7009 70” pit box txpit7009 70” pit box

TXPIT7009 70” PIT BOX
ASSEMBLY INSTRUCTIONS
Professional Tools and Equipment
PROFESSIONAL STEEL CABINET MANUAL
TXPIT7009 70” PIT BOX
TO REMOVE DRAWERS
RAISE & RELEASE DRAWER FRONTS
• Pull drawer out so it’s almost fully extended
• Push UP right hand black release lever, at the same
time push DOWN left hand black release lever
• While holding the levers in the positions as
instructed from above, pull the drawer outward
until it is released from the drawer side.
The Pit Box is equipped with raise and release
drawer fronts. To open, lift up on the drawer
front while pulling drawer towards you.
PUSH UP (RIGHT HAND SIDE)
To close, shut the drawer firmly until the latch
engages. If the drawer does not stay closed
the hook may be bent, or it may rub against
the drawer slides. To fix this problem lightly
bend the hook until the drawer will engage in
the slide
PUSH DOWN (LEFT HAND SIDE)
MAINTENANCE
• Lubricate the slides (twice a year)
• Periodically the drawer fronts, drawer
trim and other surfaces should be cleaned
with mild detergent and water.
• Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
a nonflammable cleaning fluid.
• Periodically check tires for pressure levels.
TO REPLACE DRAWERS
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: 815 254-1930
Extend the drawer slides from the tool cabinet.
Insert the brackets on each side of the
drawer into slots in the cabinet slides,
being careful that they are properly
positioned.
1. Replacement keys may be ordered, the code
which appears on the face of the lock is required.
2. Give the information for service parts: part number
and quantity.
Once properly inserted, completely
close the drawer to set the slides in
their proper positions.
1
FLAT REPAIR INSTRUCTIONS
• If air leakage occurs after use for a long
time, check tire, inflate as needed.
• If tire is pierced by a nail or other sharp
object, repair the tire as you would a
car tire. If the damage can not be
repaired, change tire.
TXPIT7009 70” PIT BOX
ASSEMBLY INSTRUCTIONS
Professional Tools and Equipment
PROFESSIONAL STEEL CABINET MANUAL
REF#
DESCRIPTION
PART#
QTY
__________________________________________
TXPIT7009 70” PIT BOX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Lock
Shelf
Shelf Support
M4x5 Philips Head Bolt
Trim(L)
Trim
Trim
Drawer Pull
Drawer Liner
Shelf Liner
Slide(L)
Trim(R)
Slide(R)
Door Pull
M10 Cap Nut
Tire(Tubeless)*
17
18
19
20
21
22
23
24
25
26
27
28
29
30
30
Ring Bolt
Washer
Spring Washer
M10x30 Hex Bolt
Positioning Rubber
The Control Handle
Handle Sleeve
Brake Mechanism
Trim
Work Top
Drawer
Drawer
Drawer
Caliper
Rotor
304003
218860
203902
320060
315044
315047
315049
301283
550805
550843
300176
315045
300177
301320
323050
319026
1 pc.
2 pcs.
8 pcs.
4 pcs.
1 pc.
2 pcs.
7 pcs.
7 pcs.
7 pcs.
4 pcs.
10 pcs.
1 pc.
10 pcs.
2 pcs.
16 pcs.
4 pcs.
(*tire pressure: max inflation 24 PSI)
2
322106
324054
324053
321046
314150
108388
314149
317010
315046
109460
109461
109462
109463
317010-C
317010-F
4 pcs.
4 pcs.
4 pcs.
4 pcs.
3 pcs.
1 pc.
2 pcs.
1 set
2 pcs.
1 pc.
4 pcs.
2 pcs.
1 pc.
1 pc.
1 pc.
The keys are taped to the
inside of the first drawer.
Professional Tools and Equipment
TXPIT7009 70” PIT BOX
HOOK
BOLT
CONTROL HANDLE
CONTROL HANDLE ATTACHMENT
Note: Control handle will be affixed in the head
with four provided M10x12 Hex Bolts
BRAKE UNLOCK
BRAKE LOCK
The bolt stick upward, the hook is off the bolt,
The bolt stick downward against the outside of the handle,
so the handle is able to move. With the brake off,
the cart can be moved.
the hook catch the bolt, so the handle is unable to move.
3
With the brake on, the cart is locked.