Anilox Cleaning Products and Doctor Blades

Anilox Cleaning Products and Doctor Blades
Corrugated Applications
ReNew™ Cleaning Products and Accessories
ReNew cleaning products and accessories and TruPoint plastic and composite doctor blades provide
corrugated printers with cost-effective alternatives for metering and anilox cleaning. Our consumable
products will save you money by minimizing press interruptions while delivering the high-quality graphics your customers expect.
Green Biodegradable Solution for Anilox Cleaning
Concentrate – Anilox Circulation System Cleaner
Flush Green concentrate through ink pumps to prevent ink and coating build-up in anilox roll cells
and all parts of the circulation system. Formula is non-corrosive, VOC-free and ideal for waterbased inks and coatings. Recommended for daily cleaning.
Ready-to-Use – Anilox and General Pressroom Cleaner
Pre-diluted for convenience, our ready-to-use formula can be sprayed directly on anilox rolls and
other pressroom surfaces for fast and easy clean-up.
Orange Eco-Friendly Cream for Anilox Cleaning
Manually clean anilox rolls with Orange on-press to remove ink and coating residue and restore
anilox cell volume between deep cleanings. Formula has low VOCs and is compatible with waterbased inks and coatings. Recommended for weekly and spot cleaning.
Anilox Roll Cleaning Brush
For use with ReNew Orange, our stainless steel anilox roll cleaning brush assists with easy,
on-press anilox cleaning and maximizes the effectiveness of the cleaning product.
Stainless Steel – for use on ceramic anilox surfaces
Plate Cleaning Brush
Horsehair brush gently but effectively cleans photopolymer and rubber plates.
Handheld RollScope
Quickly assess anilox cell condition on-press to determine when cells need cleaning and to gauge
surface wear. Available in magnification powers of 100x, 200x and 400x.
Capatch Disposable Anilox Volume Testing Strips
Quickly measure anilox cell volume using disposable testing strips to determine if cleaning is
necessary, verify volume after deep cleaning and assess anilox surface wear.
Ink Scrub Hand Cleaner
Our Ink Scrub hand cleaner is comprised of soft polymeric scrubbers to gently but thoroughly lift ink,
grease and adhesives from pores for effective hand cleaning without harsh solvents.
Our QuikShipSM Program guarantees 24-hour fulfillment on ReNew
cleaning products and accessories for corrugated printers.
“ReNew Green circulation cleaner produced immediate results after the first wash-up.
We were very impressed.”
Andrew Keeney
General Manager, New River Packaging
A Smarter Solution
www.flexoconcepts.com
508.830.9506
TruPoint™ Plastic and Composite Doctor Blades
Our TruPoint plastic and composite doctor blades are
engineered from materials that provide superior blade life
and outlast steel up to 4x in corrugated applications:
• Maximize press uptime by reducing blade changes
• Provide effective metering for basic to high-end graphics
• Reduce scoring and extend anilox life
• Minimize handling injuries
• Meter all types of inks and coatings
TruPoint DuraPoint
DuraPoint is a next-generation UHMW blade with a proprietary high-density formulation for superior blade life and
enhanced graphics. DuraPoint’s construction makes it ideal for printers who produce moderate graphics but want the
added benefit of longer blade life. Our premier blade for corrugated applications, DuraPoint is exclusive to Flexo
Concepts.
TruPoint UHMW
UHMW is our original ultra high molecular weight polyethylene doctor blade developed for reduced scoring and extended
blade life. Ideal for basic graphics where blade life is the primary objective, UHMW’s soft material and dense molecular
structure make it well-suited for long runs, coarse rolls and abrasive coatings.
TruPoint Graphix
Graphix is a tight weave fiberglass composite blade designed for high end graphics with superior blade life. Its construction yields a stiff, thin and durable blade which can accommodate a finer tip for precise metering. The physical properties
of the material make Graphix is an excellent choice for metering abrasive inks, resisting moisture and tolerating high
press speeds.
Blade
Thickness Min./Max.
DuraPoint
.030”/.8mm.125”/3.2mm
Profile
45˚/30˚/Straight/
DACC
Max. Width
5”/127mm
Max. Length
100’/30m
UHMW
.020”/.5mm.125”/3.2mm
45˚/30˚/Straight/
DACC
5”/127mm
100’/30m
Graphix
.020”/.5mm.028”/.71mm
22˚/15˚
2.5”/63.5mm
118”/2998mm
OEM-Specific Blades
In addition to the TruPoint blades listed above, we offer a wide array of OEM-specific parts. Please provide us with your
part number today for a quote.
Our QuikShip Program guarantees 24-hour fulfillment on our
TruPoint doctor blade orders for corrugated printers.
SM
“DuraPoint gives us better performance in both print quality and durability. Our operators
appreciate not having to change blades as often and the DuraPoint blades have saved us time
and money. I'm sure that your blades will be our number one choice.”
Norman J. Ball
Plant Engineer, Elgin Corrugated Box
A Smarter Solution
www.flexoconcepts.com
508.830.9506
11 Raffaele Road
Plymouth, MA 02360
sales@flexoconcepts.com
888.782.5233 toll free
508.830.9506 tel
508.830.0277 fax
Please contact us for more information or to place an order.