PRICE LIST

PRICE LIST
2007
AUSA CORPORATION
2655 Le Jeune Road, Suite 808
Ph: (305) 779-3082 Fax: (305) 779-3083
E-mail: ausa.corp@ausa.com
Web: www.ausa.com
Toll Free Customer Service
1-800-820-AUSA
ver:nov 06
TABLE OF CONTENTS
GENERAL TERMS OF SALE
Page 2
WARRANTY POLICY
Page 3 - 4
WARRANTY CLAIM PROCEDURE
Page 5 - 6
PRICE LIST
Page 8 - 17
UTILITY VEHICLE
TASK M50 UTILITY VEHICLE
Page 8
DUMPERS
SERIES 108 DUMPER
Page 9
SERIES 150 DUMPER
Page 10
SERIES 175 DUMPER
Page 11
SERIES 201 DUMPER
Page 12
SERIES 300 ARTICULATED DUMPER
Page 13
SERIES 400 ARTICULATED DUMPER
Page 13
SERIES 600 ARTICULATED DUMPER
Page 14
FORKLIFTS
CE 11 FORKLIFT
Page 15
C 150 H FORKLIFT
Page 16
C 200 H FORKLIFT
Page 17
C 250 H FORKLIFT
Page 17
C 300 H FORKLIFT
Page 18
C 350 H FORKLIFT
Page 18
GENERAL TERMS OF SALE
1. VALIDITY OF APPLICATION
The following conditions apply to all commercial contracts for products that are marketed and sold by
AUSA Corporation.
2. PRICES
The prices for products marketed and sold by AUSA Corporation are those that are found in the most
current version of the AUSA Corporation Price List and are valid at the moment of the delivery of goods.
AUSA Corporation reserves the right to modify any price on its products without any previous notice.
3. TERMS OF PAYMENT
All Payments are due net 30 days with a 1% discount if paid in net 10 days from the date of invoicing
(1% net 10 / Net 30) unless otherwise specified by AUSA Corporation.
Payment can be made by cashiers check or corporate check to: AUSA Corporation, 2655 Le Jeune
Road, Suite 808, Coral Gables, FL 33134.
OR
By wire transfer to the following account: AUSA Corporation at Ocean Bank, 2655 SW 42nd Avenue,
Coral Gables, FL 33134. Account # 090908166605, Routing / ABA # 066011392
4. CARRIAGE
All AUSA machines will be delivered FOB Houston. It is the responsibility of the customer to arrange and
assume the costs for delivery from the above mentioned location to the final destination. It is the
responsibility of the customer to perform an inspection of the machine(s) at time of delivery and report
any damage at that time to AUSA Corporation.
5. PACKAGING
All machinery will be prepared to protect against damage during transit and will include all corresponding
manuals, certificates and forms that should accompany the machine and are to be delivered to the
owner. It is the responsibility of the customer to dispose of or recycle any packaging material.
6. WARRANTIES
Please see section ‘‘WARRANTY POLICY “.
7. JURISDICTION APPLICABLE
Any grievances or disputes related to this document must be settled in the courts of the state of
Delaware, United States of America.
Customer Service: 1-800-820-AUSA
WARRANTY POLICY
WARRANTY TERMS:
All new and unused (AUSA) products are warranted to be free of defects in material and workmanship
for a period of twelve (12) months from the date of delivery to the first retail purchaser, or 1,500 hours of
use (or otherwise indicated), whichever shall occur first. However, in no event shall the warranty
extended past fifteen (15) months from the date of delivery to the Dealer. AUSA will assume
responsibility for repair or replacement, at its option, of any part of assembly proven to AUSA´s
satisfaction to be defective in normal use and service during that time.
Routine warranty service must be provided by authorized AUSA Dealers or distributors who shall be
reimbursed for the reasonable cost for parts and labour necessary to correct defects covered by this
warranty.
All of AUSA’s Official Agents are required to give the benefit of the following warranty conditions (which
are not transferable) to the FIRST RETAIL PURCHASER of the machine supplied by AUSA:
The selling authorized AUSA Dealer must notify AUSA CORPORATION, within 72 hours, of the date of
sale or date “in service” of the machine, by phone, fax, e-mail, or USPS for the AUSA warranty to
become valid.
The AUSA Warranty Claims must be filed in a timely manner, no later than 60 (sixty) calendar days from
the date of occurrence.
The AUSA warranty may be invalidated where the following has been found to apply (See
WARRANTY EXCLUSIONS):
a) The machine has been used to perform tasks that demand more than the design and strength
limitations of the product.
b) Conditions of usage can be determined to be abnormal.
c) Normal maintenance, with regard to requirements as set out and detailed by the manufacturer, have
not been adhered to.
d) The machine has undergone any modification without the express official consent of AUSA.
e) When the original seals have been broken.
f) The warranty only applies to the owner who is named in the warranty certificate.
g) When the serial number has been altered, defaced, or removed, or if payment for the equipment is in
default
No warranty will be accepted by AUSA in respect of machine or component failure when it can be
determined that such failure is the result of using the equipment with one or more attachments not given
prior application approval by them.
WARRANTY EXCLUSIONS:
This warranty is given in lieu of all other warranties expressed, implied, or statutory, including, but not
limited to, any warranty of merchantability or fitness for a particular purpose.
All faults caused by negligence, accident and misuse are excluded from any warranty. This would
include damage due to collision, corrosion, fire, theft, freezing, vandalism, riot, acts of nature, explosion,
or objects striking the product.
Service Items: filters (air, fuel, hydraulic), hoses, injection elements (if any inadequate fuel is proved to
have been used), belts, batteries, bulbs, tires, pneumatic tubes, brake pads, windscreen wiper, tires,
lubricants and antifreeze.
Soil engaging parts (buckets, etc.), clutch and brake disc, cab glass.
Customer Service: 1-800-820-AUSA
GENERAL CONDITIONS:
It should be noted that normal maintenance services such as engine tuning, brake/clutch adjustments
and the supply of materials used in any service carried out are not covered by the terms of the warranty.
In no event shall the user be entitled to recover under this warranty for incidental or consequential
damages, for loss of profit or for other economic loss caused by the vehicle to people or properties,
rental or replacement equipment.
AUSA reserves the right to make changes in the design of its products without incurring any obligation to
incorporate such changes in any product previously produced.
JURISDICTION APPLICABLE:
Any grievances related to this document must be settled in the courts of the state of Delaware, United
States of America.
REPLACEMENT / SPARE PARTS ORDERS
For parts orders please contact us:
AUSA CORPORATION
2655 Le Jeune Road, Suite 808
Coral Gables, FL 33134
TOLL FREE: 1-800-820-AUSA
FAX: 305-779-3083
www.ausa.com
Customer Service: 1-800-820-AUSA
WARRANTY CLAIM PROCEDURE
Rules for the administration of warranty claims:
Whenever parts are needed to solve problems covered under warranty, the dealer must use parts from its
stock of recommended parts. These parts must be then itemized on a warranty claim form and submitted to
AUSA Corporation; in return, any part covered under warranty will be replaced by AUSA Corporation at no
extra charge.
In the event that the damage or problem cannot be solved with parts in the dealer’s stock, a Purchase Order
itemizing the parts needed must be faxed to AUSA Corporation. The parts will then be shipped to the dealer
along with the corresponding invoice. Once the parts and invoice are received, a warranty claim form making
reference to the invoice received must be faxed to AUSA Corporation, in order to receive a credit for the
parts covered under warranty.
Regarding labor costs for repairing warranted parts during the warranty period, AUSA will be
willing to accept the following labor cost allowance:
Labor: 50% of posted rate (advertised). Mileage not included.
In this case, Dealer has to send AUSA a detailed labor costs report together with a copy of the AUSA
Warranty Claim Form.
If faults/damages are confirmed to be covered by warranty, AUSA will notify the Dealer in writing about the
acceptance of the claim costs to be invoiced.
Warranty claim forms instructions:
It is the dealer’s responsibility to order claim forms from AUSA Corporation.
Each warranty claim form has a reference which must be quoted in all correspondence.
Dates must be included as these are of great importance for identifying reasons for damage and also for
statistical studies at a later date.
The information system at AUSA identifies a machine by its Serial Number; please also include "Model
Number" in order to eliminate errors.
Any optional "Accessories" mounted on the machine must be included on the form as this gives us some
idea on the type of work that the affected vehicle has been subjected to.
Including the initial "Date of sale" along with the details of the company will link the warranty claim form with
the warranty registration certificate. Remember that the services official is the registered owner.
When the machine is repaired in a "Workshop" authorized by an AUSA Dealer which is not their own, this
must be clearly stated on the form.
The section "Description of fault" must include the date of your first contact with the client.
In the case of repairs which are carried out externally and need to be explained to our After Sales Service
Dept please ensure that a "Telephone number" and the contact information of the technician responsible
for the repair is clearly stated.
Substituted parts which are used in repairs must be noted in the box headed "Orders under warranty"
along with "Parts to be sent" indicating its defect.
Customer Service: 1-800-820-AUSA
Clearly and legibly note the "Quantity", "AUSA reference", a short description of the part and most
important a description of the defect in the part. This will allow a more precise and rapid diagnosis of the
fault.
On the reverse of the form there is a space for further notes or observations.
Parts restocking policy:
Unused parts purchased from AUSA Corporation can be returned, only once per year, no later than October
30th. Shipping costs of returned parts will be the dealer’s sole responsibility.
A restocking fee equal to 15% of the value of the parts will apply. The difference will be credited to the dealer
for future purchases of parts.
REPLACEMENT / SPARE PARTS ORDERS
For parts orders please contact us:
AUSA CORPORATION
2655 Le Jeune Road, Suite 808
Coral Gables, FL 33134
TOLL FREE: 1-800-820-AUSA
FAX: 305-779-3083
www.ausa.com
Customer Service: 1-800-820-AUSA
2007 PRICE LIST
PAGE 8
2007
MSRP
AUSA TASK M 50 - Utility Vehicle
Model
Description
TASK M 50
TASK M50 4 WD Utiltiy Vehicle with rear differencial lock. Rotax-Bombardier engine
(28.4 HP), CVT Transmission, 1100 lbs. bed capacity, payload of 1,500 lbs., and
towing capacity of 1,650 lbs. 400 cc displacement, 4 valves, single cylinder, 4-cycle,
gasoline.
Standard Color (Orange)
$11,185
Special Green Edition
$11,375
OPTIONS FOR MODEL M 50x4
Roof
Semicab (roof + windshield + wiper + rear panel)
Closed Cab (roof + windshield + wiper + rear panel + doors + heater)
Beacon
Speed limiter 25 MPH
Electric Lift Bed
Trailer hitch
Customer Service: 1-800-820-AUSA
$560
$1,999
$3,750
$199
$199
$1,175
$220
2007 PRICE LIST
PAGE 9
2007
MSRP
2 & 4 WD RIGID CHASSIS DUMPERS SERIES 108
Model
Description
108 DH
RIGID FRAME DUMPER MODEL 108 DH . LOAD CAPACITY 2,205 lbs (21 Cu. Ft.
/ 0.76 CU. YDS). HATZ ENGINE (14 HP). FRONT DUMPING. HYDRAULIC
STEERING. HYDRAULIC BRAKES. ELECTRIC START. MUD FLAPS. BACK UP
IALARM. ROPS/FOPS. ROTATING BEACON. SEAT BELTS. REAR VIEW
MIRRORS
$15,800
108 DHx4
RIGID FRAME DUMPER MODEL 108 DHx4 . LOAD CAPACITY 2,205 LBS (21 Cu.
Ft. / 0.76 CU. YDS). PERKINS ENGINE (14 HP). 4 WHEEL DRIVE WITH
AUTOMATIC DISENGAGEMENT. FRONT DUMPING. HYDRAULIC STEERING.
HYDRAULIC BRAKES. ELECTRIC START. MUD FLAPS. BACK UP ALARM.
ROPS/FOPS, ROTATING BEACON, SEAT BELTS. REAR VIEW MIRRORS
$19,265
PERKINS ENGINE VERSION DUMPERS 108 2WD
PERKINS engine (103-07), water cooled, 3 cil. 14 hp. (includes electrical hourmeter)
$1,320
OPTIONS DUMPERS SERIES 108
Lighting system (includes electrical hour-meter)
$1,000
Vibration Hour-meter (only with Deutz and Hatz engines without lighting system)
$170
Front shield with front wipers
$365
Wide base rough-terrain front tires "Big Foot" 10.0/75-15.3
$445
Wide base rough-terrain rear tires "Big Foot" 23x8.5-12 (mod. 108 4WD)
$295
Housing additional protector (mods. with Hatz engine)
Special paint color (only parts in orange)
Customer Service: 1-800-820-AUSA
$45
$870
2007 PRICE LIST
PAGE 10
2007
MSRP
2 & 4 WD RIGID CHASSIS DUMPERS SERIES 150
Model
Description
D 150 H
RIGID FRAMES DUMPER MODEL 150 DH . LOAD CAPACITY 3,307 LBS (37 Cu.
Ft. / 1.37 CU. YDS.). DEUTZ ENGINE (12 HP). FRONT HYDRAULIC
UNLOADING. HYDRAULIC BRAKES. HYDRAULIC STEERING. ELECTRIC
START. MUD FLAPS. BACK UP ALARM. ROPS/FOPS. ROTATING BEACON.
SEAT BELTS. REAR VIEW MIRRORS. MECHANICAL TRANSMISSION WITH 4
SPEED FORWARD AN 4 IN REVERSE.
$16,815
D 150 Hx4
RIGID FRAME DUMPER MODEL 150 DHx4 . LOAD CAPACITY 3,307 LBS (37
Cu. Ft. / 1.37 CU. YDS.). HATZ ENGINE (14 HP). 4WD WITH AUTOMATIC
DISENGAGEMENT. FRONT HYDRAULIC DUMPING. HYDRAULIC STEERING.
HYDRAULIC BRAKES. ELECTRIC START. MUD FLAPS. BACK UP ALARM.
ROPS/FOPS. ROTATING BEACON. SEAT BELTS. REAR VIEW MIRRORS.
MECHANICAL TRANSMISSION WITH 4 SPEED FORWARD AN 4 IN REVERSE.
$20,450
D 150 A
RIGID FRAME DUMPER MODEL 150 DA . LOAD CAPACITY 3,307 LBS. (39 Cu.
Ft. / 1.44 CU. YDS.), DEUTZ ENGINE (12 HP). SCISSOR LIFT HYDRAULIC
DUMPING 6'7''FT. HYDRAULIC STEERING. HYDRAULIC BRAKES. ELECTRIC
START. MUD FLAPS. BACK UP ALARM. ROPS/FOPS. ROTATING BEACON.
SEAT BELTS. REAR VIEW MIRRORS. MECHANICAL TRANSMISSION WITH 4
SPEED FORWARD AN 4 IN REVERSE.
$21,045
D 150 Ax4
RIGID FRAME DUMPER MODEL 150 DAx4 . LOAD CAPACITY 3.307 LBS. (39
Cu. Ft. / 1.44 CU. YDS.), HATZ ENGINE (14 HP). 4WD WITH AUTOMATIC
DISENGAGEMENT. SCISSOR LIFT HYDRAULIC DUMPING 6'7'' FT. HYDRAULIC
STEERING. HYDRAULIC BRAKES. ELECTRIC START. MUD FLAPS. BACK UP
ALARM. ROPS/FOPS. ROTATING BEACON. SEAT BELTS. REAR VIEW
MIRRORS. MECHANICAL TRANSMISSION WITH 4 SPEED FORWARD AN 4 IN
REVERSE.
$24,625
D 150 G
RIGID FRAME DUMPER MODEL 150 DG LOAD CAPACITY 3,307 LBS (26 Cu.
Ft. / 1.18 CU. YDS.), DEUTZ ENGINE (12 HP). HYDRAULIC DUMPING AND
ROTATING HOPPER WITHIN 180º. HYDRAULIC STEERING. HYDRAULIC
BRAKES. ELECTRIC START. MUD FLAPS. BACK UP ALARM. ROPS/FOPS.
ROTATING BEACON. SEAT BELTS. REAR VIEW MIRRORS. MECHANICAL
TRANSMISSION WITH 4 SPEED FORWARD AN 4 IN REVERSE.
$19,675
D 150 Gx4
RIGID FRAME DUMPER MODEL 150 DGx4 LOAD CAPACITY 3,307 LBS (26 Cu.
Ft. / 1.18 CU. YDS.) HATZ ENGINE (14 HP). 4WD WITH AUTOMATIC
DISENGAGEMENT. HYDRAULIC DUMPING AND ROTATING HOPPER WITHIN
180º. HYDRAULIC STEERING. HYDRAULIC BRAKES. ELECTRIC START. MUD
FLAPS. BACK UP ALARM. ROPS/FOPS. ROTATING BEACON. SEAT BELTS.
REAR VIEW MIRRORS. MECHANICAL TRANSMISSION WITH 4 SPEED
FORWARD AN 4 IN REVERSE.
$24,080
OPTIONAL PERKINS ENGINE FOR SERIES 150
Water cooled 14 hp PERKINS engine (103-07) 3 cil. (mods. 150 2WD / Deutz engine) (includes
electrical hour-meter)
Water cooled 14 hp PERKINS engine (103-07) 3 cil. (mods. 150 4WD / Hatz engine) (includes
electrical hour-meter)
$1,910
$1,320
OPTIONS FOR DUMPERS SERIES 150
Lighting system (includes electrical hour-meter)
$1,060
Vibration Hour-meter (only for Deutz and Hatz engines without lighting system)
$175
Front shield with front wipers
$360
Funnel for a low height unloading (150 DG)
$450
Wide base rough terrain front tires "Big Foot" 10.0/75-15.3
$425
Wide base rough terrain rear tires "Big Foot" 23x8.5-12 (mods. 150 2WD)
$300
Wide base not turf front tires 10/080-12 (mods. 150 4x2) (Hydraulic brakes needed)
Additional sumpgard (Hatz engine models only)
Special paint colour (only parts in orange)
Customer Service: 1-800-820-AUSA
$345
$45
$870
2007 PRICE LIST
PAGE 11
2007
MSRP
2 & 4 WD RIGID CHASSIS DUMPERS SERIES 175
Model
Description
D 175 RMS
RIGID FRAME SELF-LOADING DUMPER MOD.175 RMS, CAPACITY 3,850 LBS
(35 Cu. Ft. / 1.32 CU. YDS.), ENGINE HATZ (14 HP), FRONT HYDRAULIC
DUMPING. DOUBLE ARM SELF-LOADING SHOVEL WITH ADJUSTABLE
SHOVEL (120 l/300 kg). HYDRAULIC STEERING, HYDRAULIC BRAKES,
ELECTRIC STARTING. MUD FLAPS. BACK UP ALARM.ROPS/FOPS. ROTATING
BEACON. SEAT BELT. REAR VIEW MIRRORS. MECHANICAL TRANSMISSION
WITH 4 SPEEDS FORWARD AND 4 IN REVERSE.
$18,960
D 175 RMSx4
RIGID FRAME SELF-LOADING DUMPER MOD.175 RMSx4, CAPACITY 3,850
LBS (35 Cu. Ft. / 1.32 CU. YDS.), HATZ ENGINE (14 HP). 4WD WITH
AUTOMATIC DISENGAGEMENT. FRONT HYDRAULIC DUMPING. DOUBLE
ARM SELF-LOADING SHOVEL WITH ADJUSTABLE SHOVEL (660 LBS / 0.11 CU
YDS). HYDRAULIC STEERING, HYDRAULIC BRAKES, ELECTRIC STARTING.
MUD FLAPS. BACK UP ALARM.ROPS/FOPS. ROTATING BEACON. SEAT BELT.
REAR VIEW MIRRORS. MECHANICAL TRANSMISSION WITH 4 SPEEDS
FORWARD AND 4 IN REVERSE.
$22,130
PERKINS ENGINE VERSION DUMPERS SERIES 150
Water cooled 14 hp PERKINS engine (103-07) 3 cil. (model 175 4WD only/ Hatz
engine) (includes electrical hour-meter)
$1,320
OPTIONS FOR DUMPERS SERIES 175
Lighting system (includes electrical hour-meter)
$1,060
Vibration Hour-meter (only for Hatz engine without lighting system)
$170
Front shield with front wipers
$360
Wide base rough terrain front tires "Big Foot" 10.0/75-15.3
$450
Wide base rough terrain rear tires "Big Foot" 23x8.5-12 (mod. 175 2WD)
$300
Wide base not turf front tires 10/080-12 (mods. 150/175 4x2)
$350
Additional sumpgard (Hatz engine models only)
Special paint colour (only parts in orange)
Customer Service: 1-800-820-AUSA
$45
$870
2007 PRICE LIST
PAGE 12
2007
MSRP
FOUR WHEEL DRIVE DUMPERS SERIES 201
Model
Description
D 201 RH
RIGID CHASSIS DUMPER MODEL D 201 RH. LOAD CAPACITY 4,409 LBS - (54
Cu. Ft / 2.0 CU. YDS.). 2 SPEED HYDORSTATIC TRANSMISSION. PERMANENT
4 WD WITH COMPEN® SYSTEM. KUBOTA ENGINE (34.8 HP), FRONT TIPPING
SKIP, HYDRAULIC STEERING, WATERTIGHT BRAKES, AUDIBLE REVERSE
WARNING, ANTI-VANDAL PROTECTION, FOLD DOWN ROPS PROTECTIVE
ARCH, SEAT WITH APPROVED ROLLING SAFETY BELT, REAR VIEW MIRROR
$32,000
D 201 RHS
RIGID CHASSIS DUMPER MODEL D 201 RHS. LOAD CAPACITY 4,409 LBS (54 Cu. Ft / 2.0 CU. YDS.). 2 SPEED HYDORSTATIC TRANSMISSION.
PERMANENT 4 WD WITH COMPEN® SYSTEM. KUBOTA ENGINE (34.8 HP),
FRONT TIPPING SKIP, HYDRAULIC STEERING, WATERTIGHT BRAKES,
AUDIBLE REVERSE WARNING, ANTI-VANDAL PROTECTION, FOLD DOWN
ROPS PROTECTIVE ARCH, SEAT WITH APPROVED ROLLING SAFETY BELT,
REAR VIEW MIRROR SELF LOADING SHOVEL 0.23 CU YDS/990 LBS
$35,500
D 201 RHG
RIGID CHASSIS DUMPER MODEL D 201 RH. LOAD CAPACITY 4,409 LBS - (54
Cu. Ft / 2.0 CU. YDS.). 2 SPEED HYDORSTATIC TRANSMISSION. PERMANENT
4 WD WITH COMPEN® SYSTEM. KUBOTA ENGINE (34.8 HP), HYDRAULIC
TIPPING WITH 180° ROTATING SKIIP, HYDRAULIC STEERING, WATERTIGHT
BRAKES, AUDIBLE REVERSE WARNING, ANTI-VANDAL PROTECTION, FOLD
DOWN ROPS PROTECTIVE ARCH, SEAT WITH APPROVED ROLLING SAFETY
BELT, REAR VIEW MIRROR
$37,000
D 201 RHGS
RIGID CHASSIS DUMPER MODEL D 201 RH. LOAD CAPACITY 4,409 LBS - (54
Cu. Ft / 2.0 CU. YDS.). 2 SPEED HYDORSTATIC TRANSMISSION. PERMANENT
4 WD WITH COMPEN® SYSTEM. KUBOTA ENGINE (34.8 HP), HYDRAULIC
TIPPING WITH 180° ROTATING SKIIP, HYDRAULIC STEERING, WATERTIGHT
BRAKES, AUDIBLE REVERSE WARNING, ANTI-VANDAL PROTECTION, FOLD
DOWN ROPS PROTECTIVE ARCH, SEAT WITH APPROVED ROLLING SAFETY
BELT, REAR VIEW MIRROR, SELF LOADING SHOVEL 0.23 CU YDS/990 LBS
$40,600
OPTIONS FOR DUMPERS SERIES 201
Kit of 6 teeth for self loading shovel
$215
Right second seat
$320
Lighting system
Customer Service: 1-800-820-AUSA
$1,280
2007 PRICE LIST
PAGE 13
2007
MSRP
4 WD ARTICULATED CHASSIS DUMPERS SERIES 300 / 400
Model
Description
D 300 AHG
ARTICULATED FRAME DUMPER MODEL 300 AHG. LOAD CAPACITY 6,614 LBS
(48 Cu. Ft. / 1.8 CU. YDS.). HYDROSTATIC TRANSMISSION. PERMANENT 4
WD. WATER COOLED ISUZU ENGINE (45 HP). HYDRAULIC ROTATING
HOPPER ALLOWING DISCHARGE WITHIN 180º, HYDRAULIC STEERING,
WATERTIIGHT HYDRAULIC BRAKES, ROPS ARCH PROTECTION AND SEAT
WITH SAFETY BELT, ROTATING BEACON, BACK UP ALARM, HOUR METER.
$41,140
D 400 AHG
ARTICULATED CHASSIS DUMPER MODEL 400 AHG. LOAD CAPACITY 8,818
LBS (89 Cu. Ft. / 3.3 CU. YDS.). HYDROSTATIC TRANSMISSION. PERMANENT
4 WD. WATER COOLED ISUZU ENGINE (45 HP). HYDRAULIC ROTATING
HOPPER ALLOWING DISCHARGE WITHIN 180º, HYDRAULIC STEERING,
WATERTIIGHT HYDRAULIC BRAKES, ROPS ARCH PROTECTION AND SEAT
WITH SAFETY BELT, ROTATING BEACON, BACK UP ALARM, HOUR METER.
$44,715
OPTIONS FOR ARTICULATED DUMPER SERIES 300/ 400
FOPS protective roof
$790
Front shield with wiper on FOPS roof
$430
Funnel for low height unloading
$535
Lighting system
Special paint colour (only parts in orange)
Customer Service: 1-800-820-AUSA
$1,175
$870
2007 PRICE LIST
PAGE 14
2007
MSRP
4 WD ARTICULATED CHASSIS DUMPERS SERIES 600
Model
Description
D 600 AP
ARTICULATED CHASSIS DUMPER MODEL 600 AP. LOAD CAPACITY 13,227 Lb.
HYDRODYNAMIC TRANSMISSION BY TORQUE CONVERTER WITH SEMISYNCHRONIZED 4-GEAR GEARBOX. PERMANENT 4 WD. WATER COOLED
KUBOTA ENGINE (88 HP/65 KW). FRONT TIPPING, HYDRAULIC STEERING,
WATERTIGHT HYDRAULIC BREAKS, ANTIVANDAL PROTECTION, FOLD
DOWN ROPS ARCH PROTECTION AND GRAMMER SEAT WITH APPROVED
RETRACTING SAFETY BELT, FOLDING ROTATING BEACON WITH
ADJUSTABLE MOUNTING, REAR-VIEW MIRROR.
$56,805
D 600 APG
ARTICULATED CHASSIS DUMPER MODEL 600 APG. LOAD CAPACITY 13,227
Lb. HYDROSTATIC TRANSMISSION, PERMANENT 4WD, WATER COOLED
KUBOTA V3300T ENGINE (60.9/82.8 KW/CV). TORQUE CONVERTER WITH
SINCRONIZED GEAR BOX. 4 RATIOS FORWARDS AND 4 RATIOS
BACKWARDS BY MEANS OF AN ELECTRO-HYDRAULIC DEVICE. AXLES WITH
PLANETARY REDUCTION ON THE DIFFERENTIAL OUTPUT SHAFT.
$60,420
D 700 AP
ARTICULATED CHASSIS DUMPER MODEL 700 AP. LOAD CAPACITY 15,432 Lb.
HYDRODYNAMIC TRANSMISSION, BY TORQUE CONVERTER WITH SEMISYNCHRONIZED 4-GEAR GEARBOX. PERMANENT 4WD, WATER COOLED
KUBOTA ENGINE (88 HP/65 KW), 180 TIPPING DIRECTION, HYDRAULIC
STEERING,
WATERTHIGHT
HYDRAULIC
BREAKS,
ANTIVANDAL
PROTECTION, FOLD DOWN ROPS ARCH PROTECTION AND GRAMMER SEAT
WITH APPROVED RETRACTING SAFETY BELT, FOLDING ROTATING BEACON
$58,855
OPTIONS FOR ARTICULATED DUMPER SERIES 600 - 700
Lighting system
Special paint colour (only parts in orange)
Customer Service: 1-800-820-AUSA
$1,235
$735
2007 PRICE LIST
PAGE 15
2007
MSRP
ROUGH TERRAIN FORKLIFT 2,600 lbs.
Model
Description
C 11 M
ALL TERRAIN FORKLIFT MODEL C 11 M. LOAD CAPACITY 2,580 LBS WATER
COOLED KUBOTA ENGINE (13.6 KW/18.2 HP). MECHANICAL TRANSMISSION
WITH 4 SEMI-SYNCHRONISED SPEEDS. LATERAL DRIVING OPERATOR
POSITION. 10'10'' DUPLEX MAST. FORKS 3'3'' FT ROTATING BEACON. SEAT
BELT. REAR VIEW MIRROR, BACK UP ALARM. SIDE SHIFT, LOAD BACKREST
4'11" FT. ROPS/FOPS.
$24,455
PERKINS ENGINE VERSION
Water cooled PERKINS engine (103-10)
$480
OPTIONS FOR FORKLIFT C 11 M
Lighting system
$1,265
Hydraulic bucket P42/10/15 (0.5 Cu. Yd. capacity, 41" width) (Obligatory Side shift
carriage)
$3,040
Hydraulic bucket P32/07/15 (0.4 Cu. Yd. capacity, 29" width) (Obligatory Side shift
carriage)
$2,865
Wide base all terrain front tires "Big Foot" 27 x 10 - 12
$735
Wide base rear tires 21 x 8 - 9
$435
Special paint color (only parts in orange)
$940
Customer Service: 1-800-820-AUSA
2007 PRICE LIST
PAGE 16
2007
MSRP
ROUGH TERRAIN FORKLIFT 3,000 lb.
Model
Description
C 150 H
ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 150 LOAD CAPACITY 2,976
LBS. WATER COOLED ISUZU ENGINE (32 HP). 4 WHEEL DRIVE WITH
ELECTRICAL
ENGAGE/DISENGAGEMENT.
ELECTRONIC
REGULATED
HYDROSTATIC TRANSMISSION WITH 2 SPEEDS. FORK PLATE 4'2''FT. 8'9"
DUPLEX MAST. FORKS 3'3". ROTATING BEACON. SEAT BELT. REAR VIEW
MIRROR, TILTING CABIN, INTEGRATED SIDE SHIFT CARRIAGE 4'42" ft. , BACK
UP ALARM ACTIVE SECURITY EQUIPEMENT, LOAD BACKREST, ROPS/FOPS.
$38,040
C 150 Hx4
ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 150x4. LOAD CAPACITY 2,976
LBS. WATER COOLED ISUZU ENGINE (32 HP). 4 WHEEL DRIVE WITH
ELECTRICAL
ENGAGE/DISENGAGEMENT.
ELECTRONIC
REGULATED
HYDROSTATIC TRANSMISSION WITH 2 SPEEDS. FORK PLATE 4'2''FT. 8'9"
DUPLEX MAST. FORKS 3'3". ROTATING BEACON. SEAT BELT. REAR VIEW
MIRROR, TILTING CABIN, INTEGRATED SIDE SHIFT CARRIAGE 4'42" ft. , BACK
UP ALARM ACTIVE SECURITY EQUIPEMENT, LOAD BACKREST, ROPS/FOPS.
$40,665
OPTIONS FOR FORKLIFTS CH 150
Lighting system
$1,440
Front (7.00x12'') and rear (6.00x9'') solid tires (mod. CH 150 2WD)
$690
Wide base mixt rear tires 21.8x9'' (Mod. CH 150 2WD)
$345
Additional hydraulic service (Included in integrated side shift carriage 4'2'')
$785
2nd additional hydraulic service (Duplex masts) (Obligatory integrated side shift
carriage 4'2'' ft)
$1,400
Hydraulic bucket P32/07/15 (0.4 Cu. Yd. capacity, 29" width) (Obligatory integrated
Side shift carriage)
$2,865
Hydraulic bucket P42/10/15 (0.5 Cu. Yd. capacity, 41" width) (Obligatory integrated
Side shift carriage)
$3,040
10'10'' duplex mast
13'2'' FT triplex mast with free lifting up to 3'11'' FT
Front and rear windscreens protective roof and wipers
Closed soundproof cab with heater
Electronic anti-theft protection system by means of interrupting fuel flows
$955
$3,455
$900
$3,100
$805
Oxicatalytic converter
$2,775
Exhaust spark arestor
$830
Special paint color (only parts in orange)
$940
Customer Service: 1-800-820-AUSA
2007 PRICE LIST
PAGE 17
2007
MSRP
ROUGH TERRAIN FORKLIFT 4,000 AND 5,000 lb.
Model
Description
C 200 H
COMPACT ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 200, LOAD CAPACITY
4,045
LBS.
WATER
COOLED
ISUZU
ENGINE
(39
KW/53
HP).
CATALITIC
CONVERTER. AUTOMATIC REGULATED HYDROSTATIC TRANSMISSION. FORK
PLATE 4'2''ft., INTEGRATED SIDE SHIFT, 10' 8" DUPLEX MAST. FORKS 3'11" ft,
ROTATING BEACON, REAR VIEW MIRROR, SEAT BELT COILED AND INTEGRATED
INTO ERGONOMIC AND REGULABLE SEAT, FORWARD TILTING CABIN, ACTIVE
SECURITY EQUIPEMENT, ROUGH TERRAIN FRONT TIRES (11.5/80-15,3) AND
INDUSTRIAL REAR TIRES (7.00-12), BACK UP ALARM, LOAD BACKREST 4'2" ft.
ROPS/FOPS. SINGLE LEVER JOYSTICK CONTROL. INCHING PEDAL.
$44,515
C 200 H
COMPACT
SUPER COMPACT ROUGH TERRAIN FORKLIFT MODEL CH 200 COMPACT, LOAD
CAPACITY 4,045 LBS , (SPECIAL HIGH AND WIDTH) WATER COOLED ISUZU
ENGINE (39 KW /53 HP). CATALITIC CONVERTER. AUTOMATIC REGULATED
HYDROSTATIC TRANSMISSION. FORK PLATE 4'2''FT., INTEGRATED SIDE SHIFT,
10' 8" DUPLEX MAST. FORKS 3'11" ft, ROTATING BEACON, REAR VIEW MIRROR,
SEAT BELT COILED AND INTEGRATED INTO ERGONOMIC AND REGULABLE SEAT,
FORWARD TILTING CABIN, ACTIVE SECURITY EQUIPEMENT, ROUGH TERRAIN
FRONT TIRES (11.5/80-15,3) AND INDUSTRIAL REAR TIRES (7.00-12), BACK UP
ALARM, LOAD BACKREST
4'2" ft.
ROPS/FOPS.
SINGLE
LEVER JOYSTICK
CONTROL. INCHING PEDAL.
$44,515
C200 Hx4
COMPACT ROUGH TERRAIN FORKLIFT MODEL CH 200x4, LOAD CAPACITY 4,045
LBS, W ATER COOLED ISUZU ENGINE (39 KW /53 HP). CATALITIC CONVERTER.
AUTOMATIC REGULATED HYDROSTATIC TRANSMISSION. PERMANENT FOUR
WHEEL DRIVE WITH "COMPEN SYSTEM". FORK PLATE 4'2'' ft, INTEGRATED SIDE
SHIFT, 10' 8" DUPLEX MAST. FORKS 3'11" ft, ROTATING BEACON, REAR VIEW
MIRROR, SEAT
BELT
COILED AND
INTEGRATED INTO
ERGONOMIC AND
REGULABLE SEAT, FORW ARD TILTING CABIN, ACTIVE SECURITY EQUIPEMENT,
ROUGH TERRAIN FRONT TIRES (11.5/80-15,3) AND INDUSTRIAL REAR TIRES (7.0012), BACK UP ALARM, LOAD BACKREST 4'2" ft. ROPS/FOPS. SINGLE LEVER
JOYSTICK CONTROL. INCHING PEDAL.
COMPACT ROUGH TERRAIN FORKLIFT MODEL CH 250, LOAD CAPACITY 5,057
LBS,W ATER COOLED TURBO-CHARGED DIESEL KUBOTA ENGINE (46 KW/63 HP).
CATALITIC
CONVERTER.
HYDROSTATIC
TRANSMISSION
AUTOMATIC
REGULATED. FORK PLATE 4'2''ft, INTEGRATED SIDE SHIFT,
10' 10" DUPLEX
MAST., FORKS 3'11''. ROTATING BEACON, REAR VIEW MIRROR, SEAT BELT
COILED AND INTEGRATED INTO ERGONOMIC AND REGULABLE SEAT, FORWARD
TILTING CABIN, ACTIVE SECURITY EQUIPEMENT, ROUGH TERRAIN FRONT TIRES
(11.5/80-15,3) AND INDUSTRIAL REAR TIRES (7.00-12), BACK UP ALARM, LOAD
BACKREST 4'2" ft. ROPS/FOPS. SINGLE LEVER JOYSTICK CONTROL. INCHING
PEDAL.
COMPACT ROUGH TERRAIN FORKLIFT MODEL CH 250x4, LOAD CAPACITY 5,057
LBS. W ATER COOLED DIESEL TURBO-CHARGED KUBOTA ENGINE (46 KW/63 HP).
CATALITIC CONVERTER. AUTOMATIC REGULATED HYDROSTATIC TRANSMISSION
(COMPEN SYSTEM). PERMANENT FOUR WHEEL DRIVE W ITH "COMPEN SYSTEM".
INTEGRATED SIDE SHIFT. 10' 10" DUPLEX MAST, FORKS 3'11'' FORK PLATE 4'2''ft. .
ROTATING BEACON, REAR VIEW MIRROR, SEAT BELT COILED AND INTEGRATED
INTO ERGONOMIC AND REGULABLE SEAT, FORWARD TILTING CABIN, ACTIVE
SECURITY EQUIPEMENT, ROUGH TERRAIN FRONT TIRES (11.5/80-15,3) AND
INDUSTRIAL REAR TIRES (7.00-12), BACK UP ALARM, LOAD BACKREST 4'2" ft.
ROPS/FOPS. SINGLE LEVER JOYSTICK CONTROL. INCHING PEDAL.
$47,695
C 250 H
C 250 Hx4
OPTIONS FOR FORKLIFTS CH 200 / CH 250
Load Backrest 5'3'' ft
Fork plate 5'3'' with side shift carriage
Additional hydraulic service
Hydraulic bucket (0.5 Cu. Yd. capacity, width 41")
Hydraulic bucket (0.79 Cu. Yd. Capacity, width 55")
Electronic anti-theft protection system by means of interrupting fuel flows (mod. CH
250 / x4)
Water trap on fuel circuit
11'8'' ft duplex mast
14'9''ft duplex mast, wide axle
12'2'' ft triplex mast with free lifting up to 3'11''
17'9''ft triplex mast with free lifting up to 5'6'' ft (wide axle 5'11'' with plate 5'3'')
Front and rear windscreens protective roof and wipers
Closed soundproof cab with heater
Industrial front tires (11.5/80-15,3) (CH 200 4x2 & 4x4)
Industrial rear tires (27x10-12) (CH 200 4x4)
Solid front tires (11.5/80-15,3) (CH 200 4x2 & 4x4)
Solid rear tires (7.00-12) (CH 200 4x2 & CH 250 4x2)
Solid rear tires (250/75-12) (CH 200 4x4)
Flotation front tires (400/60-15.5) (CH 200 4x2 & 4x4)
Industrial front tires (10.0/75-15,3) (CH 200 Compact)
Solid front tires (10.0/75-15,3) (CH 200 Compact)
Solid rear tires (6.50-10) (CH 200 Compact)
Flotation front tires (31x15.50-15) (CH 200 Compact) (lifting load capacity limit: 2200
lbs.)
Flotation rear tires (23x10.50-12) (CH 200 Compact)
Industrial front tires (12.5/80-18) (CH 250 4x2 & 4x4)
Industrial rear tires (10.0/75-15,3) (CH 250 4x4)
Solid front tires (12.5/80-18) (CH 250 4x2 & 4x4)
Solid rear tires (10.0/75-15,3) (CH 250 4x4)
Flotation front tires (500/45-20) (CH 250 4x2 & 4x4)
Flotation rear tires (26x12.00-12) (CH 250 4x2)
Lighting system
Special paint color (only parts in orange)
Customer Service: 1-800-820-AUSA
$49,240
$52,265
$648
$985
$850
$3,040
$3,760
$805
$255
$435
$1,730
$3,160
$3,675
$895
$3,040
$55
$70
$1,950
$600
$370
$340
$55
$1,650
$780
$140
$1,085
$140
$55
$3,415
$1,335
$3,210
$665
$1,430
$940
2007 PRICE LIST
PAGE 18
2007
MSRP
ROUGH TERRAIN FORKLIFT 6,000 AND 8,000 lb.
Model
Description
C 300 H
COMPACT ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 300, LOAD
CAPACITY 6.614 LBS. WATER COOLED KUBOTA V 3300 DIESEL ENGINE
(48.1 KW / 64.5HP). CATALITIC CONVERTER. HYDROSTATIC TRANSMISSION
WITH VARIABLE FLOW PUMP AND AUTOMATIC REGULATION. ELECTRIC
GEAR INVERTER. INCHING PEDAL. 4 x 2 TRACTION. SINGLE LEVER
JOYSTICK CONTROL. LOAD BACKREST, 10'10" MAST.
$50,365
C 300 Hx4
COMPACT ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 300 x4, LOAD
CAPACITY 6.614 LBS. WATER COOLED KUBOTA V 3300 DIESEL ENGINE
(48.1 KW / 64.5HP). CATALITIC CONVERTER. PERMANENT FOUR WHEEL
DRIVE WITH "COMPEN SYSTEM" HYDROSTATIC TRANSMISSION. VARIABLE
FLOW PUMP AND AUTOMATIC REGULATION. ELECTRIC GEAR INVERTER.
INCHING PEDAL. SINGLE LEVER JOYSTICK CONTROL. LOAD BACKREST,
10'10" MAST.
$55,550
C 350 H
COMPACT ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 350, LOAD
CAPACITY 7.716 LBS. WATER COOLED KUBOTA V 3300 DIESEL ENGINE
(48.1 KW / 64.5HP). CATALITIC CONVERTER. HYDROSTATIC TRANSMISSION
WITH VARIABLE FLOW PUMP AND AUTOMATIC REGULATION. ELECTRIC
GEAR INVERTER. INCHING PEDAL. 4 x 2 TRACTION. SINGLE LEVER
JOYSTICK CONTROL. LOAD BACKREST, 10'10" MAST.
$51,200
C 350 Hx4
COMPACT ROUGH TERRAIN FORKLIFT TRUCK MODEL CH 350, LOAD
CAPACITY 7.716 LBS. WATER COOLED KUBOTA V 3300 DIESEL ENGINE
(48.1 KW / 64.5HP). CATALITIC CONVERTER. PERMANENT FOUR WHEEL
DRIVE WITH "COMPEN SYSTEM" HYDROSTATIC TRANSMISSION. VARIABLE
FLOW PUMP AND AUTOMATIC REGULATION. ELECTRIC GEAR INVERTER.
INCHING PEDAL. SINGLE LEVER JOYSTICK CONTROL. LOAD BACKREST,
10'10" MAST.
$58,265
OPTIONS FOR FORKLIFTS C 300 H / C 350 H
Fork plate 5 ft 3 in with side shift carriage
Additional hydraulic service
Forkplate 3 ft 11in with quick plugs for an easy swap from forks to tools.
Forkplate 5 ft 3 in with quick plugs for an easy swap from forks to tools.
Hydraulic bucket (158 Gl. Capacity, width 4 ft 7 in)
Hydraulic bucket (211 Gl. Capacity, width 4 ft 7 in)
Hydraulic bucket (264 Gl. Capacity, width 5 ft 3 in )
13' 1" duplex mast with free lifting up to 3ft 11 in
12' 1" triplex mast with free lifting up to 3ft 11 in
17' 8" triplex mast with free lifting up to 5 ft 6 in (wide axle 5 ft 11 in with plate 5 ft 3
in)
22' 4" triplex mast with 42º fold down kit
Front and rear windscreens protective roof and wipers
Closed soundproof cab with heater
Lighting system
Special paint colour (only parts in orange)
Customer Service: 1-800-820-AUSA
$925
$875
$1,260
$1,380
$4,295
$4,960
$7,070
$975
$3,320
$4,000
$7,510
$1,150
$3,250
$1,360
$960
Customer Service: 1-800-820-AUSA
AUSA CORPORATION
2655 Le Jeune Road, Suite 808
Coral Gables, FL 33134
TOLL FREE: 1-800-820-AUSA
FAX: 305-779-3083
www.ausa.com