PM1600 Wireless Pulse Meter

PM1600 Wireless Pulse Meter
Pulse metering made simple
for utility billing, monitoring and control
applications. The PM1600 is an simple and
cost-effective solution that does not require
drive by data collection.
Secure, Reliable, Wireless Bi-directional Communication
Opening the spectrum of applications to the real-time, two-way mass meter systems, as well as
those hard to reach locations or demanding applications, the eLutions PM1600 provides a direct
interface from pulse meters to standard applications used in the utility and energy industries.
With pulse logging and iDEN® Network support built-in, the PM1600 is a natural choice for meter
connectivity without the necessity for drive-by reader systems or hardwired installations.
Internet-enabled Wireless Solutions for Sensor and Control Applications
COMMERCIAL APPLICATIONS:
• AMR
• Building Controls
• Demand Response
• Energy Management
• Industrial Automation
• Generator Monitoring & Controls
The PM1600 can be used in conjuction with the industry standard AEM® (Active Energy
Management) software which is the gold standard for commerical and industrial users of Energy
Information Systems. AEM® enables real-time monitoring and control, forecasting and billing of
energy systems which encompass any form of metering, generation, HVAC or user specified
equipment.
The PM1600 can also be used directly with eLutions PRLM (Price Responsive Load Module)
software for structured curtailment applications. This allows Independent System Operators,
Curtailment Service Providers, Utilities and end-users to schedule, control, contract and settle
transactions in the near real-time energy markets.
The PM1600 works with the eLutions GenView software for tracking, monitoring, control and
dispatch of generators or generator groups.
Easy to Integrate
Through the use of standard interfaces at the communications or database layers, the PM1600
can easily integrate with client or third-party software applications.
See the PM1600 Today!
Enhance the investment in your business with the PM1600 Pulse Meter device, compatible
application and the iDEN® Network. Demonstrations are available by contacting an eLutions
Sales Representative at sales@elutions.com.
SAMPLE ENERGY & UTILITY
APPLICATION SCREENS
www.elutions.com/data • 813-371-5500 • sales@elutions.com
PM1600 Wireless Pulse Meter
FEATURES AND BENEFITS
SYSTEM OVERVIEW:
• Reliable, stand-alone module designed for easy installation and dependable operation
• Real-time wireless meters data collection and control
• Revenue grade data for electric, gas, water and steam meters
• Pulse device support for pulse initiating voltage, flow and temperature meters
• Support for three pulse meters by utilizing on-board digital inputs
• Internet/Intranet support using an embedded TCP/IP stack
• Provides real-time alarm and control when used with any eLutions vertical application
• Over-the-Air (OTA) capabilities for remote firmware/feature upgrades
• Closed loop control support utilizing on-board digital output
• Internal battery charging control circuit for remote operation
• Rugged enclosure
COMMUNICATIONS:
• Transmits data through the Packet Switched iDEN® Data Network to AEM® , PRLM,
GenView or client application using TCP/IP and ENDPTT Protocols
• Support for alternate intelligent devices using the on-board RS485/RS232 communication
port
INPUTS/OUTPUTS:
• 3 Digital Inputs (channels) for pulse counting
- Supports local data storage for 56 days of 5 minute interval history
- Collects data in 5, 15, 30, and 60 minute intervals, fixed or sliding window
• 2 Analog Inputs monitoring 4-20mA or 0-10V sensors
• 2 Digital Outputs/control relay outputs
SAMPLE ENERGY & UTILITY
APPLICATION SCREENS
TECHNICAL SPECIFICATIONS
RADIO
Motorola i30sx equivalent
600mW output
POWER REQUIREMENTS
Voltage: 8 to 18 VDC (12 VDC nominal)
Input current: 0.125 amps steady state
– 1.5 amps transient peak
FCC COMPLIANCE
Part 15 and part 90
Laptop HyperTerminal interface
CASE
ANTENNA REQUIREMENTS
50 Ohm Impedance
WEIGHT
ENVIRONMENT PARAMETERS
SHOCK & VIBRATION
Per MIL-STD-810E
Approximately 5.04”W x 2.25”H x 7”D
FIELD DIAGNOSTICS
Aluminum extrusion chassis and plate
metal faceplates, base unit with flange at
either side for direct mounting, dust and
water resistant, splash proof cover
625 grams
DIMENSIONS
Operating Temperature -25C to +60C
Storage Temperature -40C to +85C
Operating Humidity 0 to 95% RH noncondensing at +50C
Data Sheet for accompanying hardware at www.elutions.com/data
© 2004 eLutions, Inc.