CRAFTED FOR HARDWORKING FEET

Transcription

CRAFTED FOR HARDWORKING FEET
Korsvang Centret DK 5610 Assens
Telefon +45 64713608* Telefax +45 64713684
www.danskerhvervsbeklaedning.dk
Alt i beklædning, fodtøj, rengøringsartikler og sikkerhedsudstyr,
samt reklamegaver og strøartikler med tryk, broderi og gravering, efter opgave.
Skilte, bannere og bilreklamer efter tilbud.
CRAFTED FOR HARDWORKING FEET
Est.
19
07
CERTIFICATES overview
Dansk Erhvervsbeklædning
Dansk Skilte Reklame
CERTIFICATES overview
EN-ISO 20345
Suitable for contractors, bricklayers, light industry and building. Pay
SB
attention to the fact that the product is either not antistatic, has heel
cap or is shock absorbing in the heel.
s1
Suitable for light industry where a protective midsole is not demanded.
s1
Suitable for light industry where a protective midsole is demanded.
P
s2
s3
s4
s5
HRO
Suitable for light industry and heavy industry where a protective midsole is not demanded.
tive midsole is demanded.
Suitable for light industry and heavy industry where a protective midsole is not demanded. Only apply to waterproof boots.
Suitable for contractors, bricklayers amd heavy industry where a protective midsole is demanded. Only apply to waterproof boots.
Heat resistant up to 300° C
Protective midsole, 1100 Newton
a
Antistatic between 100 kOhm and 1000 mOhm
CI
Cold insulation
E
Shock absorption in the heel min. 20 Joule
FO
ESD
Water resistant upper
Fuel Oil
Electrical resistant. Sensitive electronic components are not affected or
damaged by static electricity
WR
Waterproof
CR
Cut resistant
SR
This is who we are
Suitable for contractors, bricklayers and heavy industry where a protec-
P
WRU
04
Slip resistant. SR-A approved on wet tiles. SR-B approved on oily steel
surfaces. SR-C approved on A+B
To simplify the definitions of the footwear and make it easier for the user to
07
The right partner makes the difference
09
San-duty
16
San-pro
21
San-chef
choose the right footwear the abbreviations have been gathered under the
following designations:
S1 = SB – A – E
Closed heel area
S2 = SB – A – E – WRU
Closed heel area
S3 = SB – A – E – WRU – P Closed heel area
S1P = SB – A – E
As S1 with protective midsole
S4 = SB – A- E – WRU
Only apply to boots
S5 = SB – A – E – WRU – P Only apply to boots
EN-ISO 20347
Footwear certified to EN-ISO 20347 is without toe cap. The footwear is for
occupational use and developed for the protection of the user against injuries
27
San-safe
31
San-flex
which can occur on the working place. The footwear is marked after the same
regulations as footwear certified to EN-ISO 20345, where S is replaced by O.
oB
OB = Basic requirements
o1
O1 = Basic requirements + A + E
o2
O2 = Basic requirements + A + E + WRU
34
More than black and white
All products have been certified in accordance with
EN-ISO 20345:2011
EN-ISO 20347:2011
Sanita
page 03
this is
who
we are
For 100 years, we have used our experience in combination with
modern technology to refine the classic wooden clog. This enable
us to present footwear that lives up to the ever increasing
demands in the professional industry.
With Sanita Footwear, a simple product has become a science,
where our one-of-a-kind quality is integrated into all aspects of the
product. Durability, stability, flexibility and timeless design are all
essential. But most important of all, our footwear provides freedom
and comfort for your feet.
Today our production facilities are located in Europe. Concept
and product development is all handled in Denmark – in close
partnership with other HQ facilities such as market research,
strategic planning as well as sales and marketing.
We are a flexible partner who makes individual solutions tailormade for our customers’ needs and we work hard to continuously
deliver comfortable, durable, flexible and most important safe
footwear to hard working people.
The people whose efforts make our world move forward.
The working class heroes of today.
Sanita
page 05
The right
partner
makes the
difference
At Sanita Footwear we see our customers as partners. Partners with whom we
continuously collaborate, to ensure their specific needs are met. We are flexible
and eager to always improve the performance of our product range.
Sanita Footwear is developing tailor made workwear concepts, because demands
and requirements in the professional industry are expanding and developing
every day.
We see the ongoing dialogue and product enhancement with our partners as a
natural and integral part of the Sanita way of engaging in a partnership.
At Sanita innovation is always driven around insight into customer needs, but
we always make sure our core product values such as simplicity, functionality,
comfort and above all safety are not compromised in the final concepts brought
to the professional industry .
We have worked this way for more than a hundred years, and plan to do so for at
least a hundred more. So are you looking for a both safe and visionary partner to
deliver a workwear concept that fits your specific work environment, then Sanita
Footwear is the right partner.
Sanita
page 07
new
San-duty
The San-Duty is the latest version of our Sanita clog, and we are proud to
present the world’s best and most comfortable flexible clogs.
This specially designed PU outsole ensures superior shock absorption,
durability and grip on virtually any type of surface (SRC). The uppers are
produced in durable and water resistant Permair Protector leather, and
the extra TPU reinforcement on the toe makes it e
­ xtremely hard wearing.
The full-length insole, made of non-allergenic leather, carries heat and
moisture away from the feet so they will stay dry all day long.
All of our S3 clogs are produced with a non-metallic, penetration-­
resistant midsole.
All our Sanita-Duty products are approved in accordance with
EU standards.
Sanita San-Duty
page 09
San-duty
1503010-1
Open safety clog with pronose
Size 36-48
SB
E
a
WRU
FO SR-C
EN-ISO 20345
1503011-1
Open safety clog with backstrap and pronose
Size 36-48
1501010-1
SB
Size 36-48
E
a
FO
a
WRU
FO SR-C
EN-ISO 20345
Non-safety clog with open heel
oB
E
WRU SR-C
EN-ISO 20347
1501020-1
Non-safety clog with closed heel
Closed safety clog with pronose
Size 36-48
Size 36-48
o2
FO SR-C
EN-ISO 20347
www.sanitaworkwear.dk
1503020-1
s2
FO SR-C
EN-ISO 20345
Sanita San-Duty
page 11
San-duty
1501010-2
1503011-2
Non-safety clog with open heel
Open safety clog with backstrap and pronose
Size 36-48
Size 36-48
oB
E
a
FO
WRU SR-C
SB
a
WRU
FO SR-C
EN-ISO 20345
EN-ISO 20347
1501020-2
1503020-2
Non-safety clog with closed heel
Closed safety clog with pronose
Size 36-48
Size 36-48
o2
E
FO SR-C
s2
EN-ISO 20347
FO
SR-C
EN-ISO 20345
1503010-2
1503022-2
Open safety clog with pronose
Closed safety clog with pronose,
Size 36-48
non-metallic nailprotection
Size 36-48
SB
E
EN-ISO 20345
www.sanitaworkwear.dk
a
WRU
FO SR-C
s3
FO SR-C
EN-ISO 20345
Sanita San-Duty
page 13
Working class
heroes working
hard
Sanita
page 15
San-pro
1505011-2
Open safety clog with backstrap, pronose
Size 36-48
SB
FO
E
a
WRU HRO
SR-C EN-ISO 20345
1505011-1
San-pro
Open safety clog with backstrap, pronose
Size 36-48
SB
E
a
WRU HRO
FO SR-C EN-ISO 20345
The Sanita San-Pro is a product of modern technology where the sole is
cement-lasted. This specially designed sole is well suited to wet working
environments where the nitrile rubber provides excellent grip and makes
the shoe extremely durable and slip-resistant (SRC).
The outsole is heat resistant up to 3000 c (HRO). The uppers are produced
in durable and water resistant Permair protector leather, and the extra
reinforcement on the toe makes it extremely hard wearing.
The full-length POLIYOU insole provides an antibacterial shock absorbing
footbed. The material is antistatic and breathable, so the feet will stay dry
-even after a long day at work.
1505022-2
Closed safety clog with pronose,
non-metallic nailprotection
Size 36-48
s3
HRO
FO
SR-C
EN-iso 20345
All of our Sanita-Pro clogs are approved in accordance with ­
EU standards.
1505022-1
Closed safety clog with pronose,
non-metallic nailprotection
Size 36-48
s3
HRO
FO
SR-C
EN-ISO 20345
www.sanitaworkwear.dk
Sanita San-Pro
page 17
Working class
heroes working
hard
Sanita
page 19
new
San-chef
Sanita Footwear faces the requirements of the job market and develops
specific concepts for our customers to suit their individual needs.
As a result, we continuously improve the performance of our Clogs and
our safety shoes, to reduce occupational hazards and to give our customer
the best solution.
We are proud to introduce San-Chef, the newest addition to
the Sanita family.
The San-Chef product-group have been developed by our in-house design
team to fit the special demands from the food an kitchen industry.
San-Chef has a specially designed double-density wedge sole with a
Phylon midsole to make the sole extra lightweight. The rubber outsole
provides excellent grip and makes the shoe extremely durable and
slip-resistant.
The special insoles provide a comfortable foot climate and a high degree
of wearing comfort. The Excellent moisture absorption prevents odors and
infection from occurring.
The unique climate regulating outlast lining has the ability to absorb and
release perspiration and provides a good climate regulation in the shoe.
All of our San-Chef products are approved in accordance with
EU standards.
Sanita San-Chef
page 21
San-chef
201301-2
Lace-up shoe without safety
Size 35-48
o2
FO
SR-C
EN-ISO 20347
201302-1
Slipper without safety
Size 35-48
o2
FO
SR-C
EN-ISO 20347
201301-1
201302-2
Lace-up shoe without safety
Slipper without safety
Size 35-48
Size 35-48
o2
FO
SR-C
EN-ISO 20347
www.sanitaworkwear.dk
o2
FO
SR-C
EN-ISO 20347
Sanita San-Chef
page 23
San-chef
201303-1
Non-safety sandal with velcro
Size 35-48
o1
FO
SR-C
EN-ISO 20347
201314-1
Boot with sipper, toe protection
Size 35-48
S2
FO
SR-C
EN-ISO 20345
201303-2
201315-1
Non-safety sandal with velcro
Lace-up boot with toe protection
Size 35-48
Size 35-48
o1
FO
SR-C
EN-ISO 20347
www.sanitaworkwear.dk
S2
FO
SR-C
EN-ISO 20345
Sanita San-Chef
page 25
San-SAfe
The San-Safe is developed to meet the safety requirements in specialized
industrial fields.
A lot of emphasis is placed on comfort and fit, and the specially designed
sole and the high quality materials ensure a high level of wellbeing. The
specially designed antistatic PU/PU outsole is very slip resistant and
provides a good grip (SRC). The shank provides the Optimal Arch Support,
which also minimizes the rist of twisting
The San-Safe has a full-length antibacterial insole that provides a shock
absorbing footbed. The material is antistatic and breath­a ble, so the feet
will stay dry -even after a long day at work.
All our Sanita-Safe products are approved in accordance with
EU standards.
Sanita San-Safe
page 27
San-SAfe
909102
Safety shoe with velcro and oil nubuck upper
Size 40-47
s3
SR-C
EN-ISO 20345
909101
Safety shoe with PVC insert and oil nubuck upper
Size 36-47
s3 SR-C
EN-ISO 20345
909104
909201
Sporty safety shoe with mesh and oil nubuck upper, elastic lace
Safety boot with PVC insert and oil nubuck upper
Size 40-47
Size 36-47
s1P SR-C
s3 SR-C
EN-ISO 20345
EN-ISO 20345
www.sanitaworkwear.dk
Sanita San-Safe
page 29
San-flex
The Sanita San-flex clog is the original Sanita clog with a stapled construction. The original outsole was patent back in 1988, and have been a
bestseller for Sanita for many years. The special mix of polyurethane and
rubber provides a good grip and stops the shoe from slipping. The fulllength insole, made of non-allergenic leather, carries heat and moisture
away from the feet so they will stay dry all day long.
The sanita San-Flex is something special because of its uniquely design
and high quality materials that ensure durability. At the same time, fit and
flexibility provide guaranteed comfort.
Sanita San-Flex
page 31
San-flex
1500314-1
1500314-2
Open clog
Open clog
Size 36-48
Size 36-48
oB
E
a
FO SR-C
oB
EN-ISO 20347
1500313-2
Closed clog
Closed clog
Size 36-48
Size 36-48
E
a
FO SR-C
oB
EN-ISO 20347
FO SR-C
E
a
FO SR-C
EN-ISO 20347
1500038-1
1500045-1
Open clog with backstrap
Open clog with backstrap and elastic instep
Size 36-48
Size 36-48
oB
E
EN-ISO 20347
www.sanitaworkwear.dk
a
EN-ISO 20347
1500313-1
oB
E
a
FO SR-C
oB
E
a
FO SR-C
EN-ISO 20347
Sanita San-Flex
page 33
San-flex
MORE THAN BLACK AND WHITE
Slide your own design behind the
clog to get a look and feel of your
next work footwear
Your workwear
your style
When we say, that we are flexible and fit our workwear series to meet our
customers specific demands, we really mean it – even when it comes to
the look and style.
The San-Flex series extends our commitment to flexibility even further.
The San-Flex concept offers you the opportunity to style your workwear,
exactly as you please. If you want your company identity, funky colours,
patterns, imagery or graphics to complete your work outfit, we can make
it happen.
Only your imagination sets the limit.
www.sanitaworkwear.dk
Sanita San-Flex
page 35
Dansk Erhvervsbeklædning
Dansk Skilte
Reklame
Est.
CRAFTED FOR HARDWORKING FEET
Korsvang Centret DK 5610 Assens
19 Telefax07
Telefon +45 64713608*
+45 64713684
www.danskerhvervsbeklaedning.dk
Alt i beklædning, fodtøj, rengøringsartikler og sikkerhedsudstyr,
samt reklamegaver og strøartikler med tryk, broderi og gravering, efter opgave.
Skilte, bannere og bilreklamer efter tilbud.
Sanita Footwear a/s | Guldborgvej 3, 1. | 7400 Herning | Denmark
Tel. +45 96 60 53 00 | e-mail: info@sanita.dk | www.sanitaworkwear.dk