Complete Pumps Brochure

PUMPS
SELWOO
D
The
No1
Choice
Your Complete Pump Solution
Sizes From 50mm To 300mm - Site, Fast Tow Or Skid
Super Silent Canopy - Environmentally Friendly
www.selwoodpumps.com
INTRODUCTION
Established for over
60 years, Selwood
is one of the largest
privately owned
companies serving
the UK construction
and industrial rental
markets. It is the leading pump supplier in
the UK as well as the leading distributor
of construction equipment on the south
coast.
Selwood has designed and manufactured
mobile site pumps for over fifty years and is
now acknowledged as one of the UK leaders
in this particular field.
ENVIRONMENTAL
Selprime
market standard in the construction industry,
and upgraded versions of those same designs
still play a vital role within the impressive
line-up of diaphragm and prime assisted
centrifugal pumps.
Today, the company addresses the needs
of many industries including construction,
marine, environmental and pollution control,
mining and industrial effluent management.
This broad spectrum demands that a wide
range of materials may be handled from water
and solids in suspension to bentonite muds,
oil and bilge slurries.
Super Silence
Super Silent versions are available with
noise levels from as low as 55 db(A).
Fully Bunded
Selwood Head Office site today.
The Selwood pump success story is one of
continuous growth, innovation and enterprise.
Since its inception in 1955, the company has
seen consistent expansion into new market
areas both in the UK and overseas, with 70%
of pump units now being exported through a
worldwide distributor network.
The unique original Selwood self priming
system utilising a water tolerant diaphragm
air pump. An
SELPRIME
environmentally
friendly design
that has none
of the problems
of oil vapour
emissions and
oil emulsification
associated with
other priming
systems.
QUALITY, HEALTH, SAFETY &
ENVIRONMENT
With a commitment to quality, safety and
the environment, Selwood is proud to be
one of the few companies within the UK
that holds all three recognised standards:- Quality
- Environmental
- Health & Safety.
All Super Silent units are fully bunded,
ensuring that any
fuel or oil leakage
is retained within
the bund and does
not contaminate the
surroundings. Drain
plugs within the unit’s
chassis can then be
used to remove the
fluids.
Auto Stop/Start & Telemetry*
Float control for automatic stopping and
starting of the pump. This is a no-nonsense
system giving a simple, outstanding
performance for the cost conscious.
Telemetry allows remote measurement
and reporting of the pumps operation,
directly to pre-selected mobiles or land
lines, providing real time alarm messages
for high level float, failure/start, engine fault
and emergency stop activation.
* Not currently available for the H150 or H200
Selwood’s original pump designs, the well
known “Simplite”, “Spate” and “Seltorque”
models, quickly established themselves as the
PD RANGE (POSITIVE DISPLACEMENT)
These environmentally friendly, automatic
priming pumps with indefinite dry running
ability are Selwood’s original pump designs
that quickly established themselves in the
marketplace and continue to play a vital
role today.
Selwood Simplite PD50
A general purpose, lightweight,
reciprocating diaphragm pump, the Simplite
has gained an international reputation for
efficiency and dependability. Versatile in
application, the pump will handle site water,
slurries, sand and similar abrasives.
PD50
PD75
PD100
Simplite PD50
Spate PD75
Spate PD100
updated 11/02
updated 11/02
updated 11/02
PD50
PD75
12
40
25
6
20 ft
4
2
0
2
4
6
8
10
12
15
10
10
5
5
60
960
50
40
m 12
ft
10
1100
8
40
4
10
2
0
5
10
15
20
25
30
0
35
m3/h
10 20 30 40 50 60 70 80 90 100
m3/h
PD50
PD75
PD100
Power Required
kW
0.75
2.5
6
Pump Speed
rpm
90
1450
1000
Capacity
m³/h
11
30
77
m
8.8
9.1
9.1
Max. Solids Size
mm
13
6
16
Air Handling
l/s
-
3.77
11.8
Inlet / Outlet Port
mm
50 / 75
75
100
m
12
30.5
20
Suction Lift
Delivery Head
30
20
6
20
m3/h
Specification
60
1000
14
80
20
15
16
1450
25
m
18
100
30
70
20
35
30
8
22
120
35
10
m
PD100
ft
Selwood Spate PD75, PD100
The Spate handles dirty water, slurries,
light and heavy oils, petroleum industry
products, including some of the more
viscous liquids, at a high, non turbulent
flow rate. It is also well suited to a variety
of demanding site conditions. The unique
design makes it the perfect pump for the
control of oil pollution. It is world renowned
for its suitability on all oil recovery
applications and works in conjunction
with a wide variety of recovery systems
and skimmers. Simplicity of design and
construction provides for total ease of
maintenance. Hydraulic, pneumatic, diesel,
petrol and electric drives can be fitted to
suit individual needs.
D RANGE (DRAINER)
SELPRIME
These robust high performance pumps with
indefinite dry running ability are particularly
suitable for water companies, pump
hirers and high flow applications. The
range offers easy operation, unparalleled
reliability and inherent safety.
The new D80 and D100 pumps are
compact and cost effective 3” and 4”
pumps that are extremely versatile,
performing very effectively in a wide variety
of applications. The D150WP has been
specifically designed for all wellpoint
applications and produces maximum
drawdown at an operating speed of just
1500rpm.
Low operating costs are achieved
through overall design efficiency together
with a series of innovative features, which
produce an impressive maximum flow rate
of 600m3/hr. a maximum head of 40.5m
and the handling of solids of up to 55mm.
From
5db8(A)
D150WP
D80
Selwood D75 & D80
Selwood D100
Selwood D150
updated 3/07
updated 1/04
updated 11/02
D75 / D80
D100
25
70
D80
20
60
15
15
50
m
D150
25
80
20
The pumps are available with a choice
of builds having a wide range of engine,
electric motor and chassis options as well
as close coupling on some models.
D100 SS
40
D75
10
ft
m
30
20
5
5
10
0
20
40
60
0
80 100 120 140 160
20
40
30
50
25
80
20
70 ft
60
ft
60
m
30
15
20
10
10
5
110
100
90
50
40
30
20
10
0
80 100 120 140 160
50 100 150 200 250 300 350 400 450
m /h
m /h
m /h
Selwood D150R
Selwood D200
updated 4/03
updated 11/06
updated 11/02
3
D150R
24
50
12
40 ft
m
100
150
200
250
300
90
80
20
70 ft
60
50
0
350
30
80
20
60
40
20
5
10
0
50 100 150 200 250 300 350 400 450
100
200
300
400
500
600
700
m3/h
m3/h
Specification
ft
10
20
m3/h
m
25
15
40
5
100
30
25
10
10
50
100
15
20
4
120
35
110
30
30
8
40
120
35
60
16
D200
130
40
70
20
0
60
120
3
D150WP
m
35
Selwood D150WP
3
Super Silent versions are available with
noise levels from as low as 58 db(A).
40
70
40
10
130
80
D75
D80
D100
D150
D150WP D150R
D200
Power Required
kW
3.8
6.5
6.5
28
12
17
42
Pump Speed
rpm
2000
2000
2000
2000
1500
1750
1500
Capacity
m³/h
60
90
120
380
275
315
600
m
9.1
9.1
9.1
9.1
9.1
9.1
9.1
Max. Solids Size
mm
29
29
29
45
45
45
55
Air Handling
l/s
4.25
4.25
4.25
24
48
24
24
Inlet / Outlet Port
mm
75
80
100
150
150
150
200
m
23.5
23
23
40.5
21
27
37.5
Suction Lift
Delivery Head
S RANGE (SELTORQUE)
SELPRIME
With solids handling capabilities of up to
100mm and indefinite dry running ability,
the Selwood Seltorque range of vortex
pumps form the foundation upon which
the company’s international reputation has
been built.
From
5db5(A)
S150
S200
The environmentally friendly Seltorque
range has the unique Selprime automatic
self priming system together with
an oil immersed mechanical seal
enabling them to operate in the most
arduous of circumstances encountered
in the construction, mining and municipal
industries. These pumps offer completely
automatic priming from depths of
9.1 metres (30 feet) and unequalled
performance in effluent disposal and slurry
handling.
S100 SS
Seltorque S100
Seltorque S100 & S150
updated 11/02
updated 11/02
S100
S150
22
22
70
20
70
20
60
18
16
60
18
16
50
14
50
14
40 ft
m 12
10
40
m 12
10
30
8
ft
The pumps are available with a choice
of builds having a wide range of engine,
electric motor and chassis options as well
as close coupling on some models.
30
8
20
6
4
0
40
80
120
160
20
6
4
10
2
10
2
0
200
40
80 120 160 200 240 280 320 360
m3/h
m3/h
Seltorque S200 Ver 4
Seltorque S300
December 2008
NEW CURVE (Mark Page) 3/05
Includes blue curve (Mark Page) 2/09
S200
25
50
10
120
35
50
40
140
40
60
m
160
45
70
15
Super Silent versions are available with
noise levels from as low as 55 db(A).
S300
80
20
100
30
ft
m 25
80
20
30
ft
60
15
20
10
0
100
200
300
400
500
40
10
5
20
5
0
600
240
480
Specification
720
960
1200
m3/h
m3/h
S100
S150
S200
S300
Power Required
kW
16
24
42
80
Pump Speed
rpm
1600
1600
1450
1600
Capacity
m³/h
160
320
540
1100
m
9.1
9.1
9.1
9.1
Max. Solids Size
mm
75
100
100
100
Air Handling
l/s
24
24
24
24
Inlet / Outlet Port
mm
100
150
200
300
m
21.3
21.3
18.5
39
Suction Lift
Delivery Head
One of Selwood’s original pump designs,
its simplicity offers easy operation and
unparalleled reliability coupled with
inherent safety.
H RANGE (HIGH HEAD)
SELPRIME
These specialist pumps incorporate the
features of all Selwood’s other prime
assisted pumps and meet the demands for
high head dewatering applications.
With proven design, their simplicity offers
easy operation and unparalleled reliability
coupled with inherent safety.
From
6db6(A)
The environmentally friendly high head
range has the unique Selprime automatic
air pump priming. The H80 has an oil
immersed mechanical seal with all other
models using a two ring vacuum gland
providing extended dry running. The
‘H’ range features abrasive resistant
pump ends ideal for those more arduous
applications.
With a wide range of models available,
heads of up to 140m* and capacities of up
to 950m3h are achievable. All the pumps
provide fully automatic self priming from
depths of up to 9.1m
H80
H150
Selwood H80
H80
H100
updated 11/02
100
80
00
600
H125*
800
000
200
600
180
160
250
2000
160
40
80
1400
100
30
20
10
20
40
60
80
100
0
40
80
120
160
200
40
0
80
120
160
200
240
m3/h
Selwood H150
Selwood H200
updated 11/02
updated 11/02
H200
100
300
90
80
250
70
300
90
1800
80
1600
70
1600
200
60
m 50
150
ft
150
40
40
100
30
100
30
20
20
50
10
100
200
300
400
50
10
500
200
m3/h
Specification
250
200
60
ft
50
0
40
m3/h
100
m
100
20
240
H150
Note: Fuel cubes are required for the H100, H125,
H150 and H200
200
60
100
20
m3/h
Super Silent versions are available with
noise levels from as low as 62 db(A).
200
40
120
ft
300
80
60
50
400
m 100
300
2200
2400
120
ft
m 100
150
500
140
400
120
ft
m 50
600
180
500
140
200
60
0
00
200
300
90
70
The pumps are available with a choice of
builds having a wide range of both engine
and chassis options.
H100 SS
400
600
800
1000
1200
m3/h
H80
H100
H125*
H150
H200
Power Required
kW
30
82
110
140
250
Pump Speed
rpm
2000
2200
2400
1800
1600
Capacity
m³/h
95
200
225
450
950
m
9.1
9.1
9.1
9.1
9.1
Max. Solids Size
mm
19
30
30
38
60
Air Handling
l/s
4.25
24
24
24
24
Inlet / Outlet Port
mm
80
100
150 / 100
150
200
m
95
120
140
95
85
Suction Lift
Delivery Head
*H125 available mid 2010 - subject to final tests.
HS RANGE (HYDRO-SUB)
The high performance hydraulic
submersible Selwood Hydrosub pumps
comprise 50mm - 200mm models with
electric start diesel driven hydraulic power
packs fully protected by an automatic
shutdown system.
A unique feature of this range of pumps
is their versatility. The hydraulic wet
ends, available in aluminium, cast iron or
stainless steel, are capable of a high
flow and low head or a low flow and
high head.
From
6db2(A)
HSP10
HSP35
HS25 - Borehole
HS50 Range
HS75D - Drainer
10/4/08
HS50
12/7/04
HS75
HS25
50
72
140
40
HSP20
35
64
120
80
20
48
ft
m 40
10
3
6
9
12
15
B
0
12
24
36
48
16
45
12
8
30
4
0
24
72
96
HS200/250D
12/7/04 - 28/1/09
10hp powerpack
30
25
H
180
20
140
20/5/08
40
C
m 15
ft
SC
90
36
120
80
32
105
70
28
90
D
60
5
10
S
60
40
10
D
C
50 ft
SC
100
L
S
20
90
120
150
0
180
100
m3/h
C - Chopper,
200
300
400
24
12
20
8
10
4
0
S - Vortex,
D - Drainer,
B - Borehole,
ft
60
16
30
500
75
m 20
m3/h
J - Jetting,
120
HS200
60
m 40
Super Silent versions are available with
noise levels from as low as 62db(A) at 7m.
15
48
HS150
220
High specification motors and replaceable
stainless steel wear plates are featured
throughout the range.
30
HSP10
HS150 Range
260
ft
60
19/3/07
50
H - High Head,
75
HS100 Range
60
30
90
m3/h
70
30
24
m 20
60
60
105
HSP20
m3/h
80
0
28
120
m3/h
HS100
20
180
90
D
8
18
32
120
H
16
20
5
36
210
ft
24
40
HSP10
240
150
32
60
15
40
J
56
100
30
m 25
16/5/08
80
160
45
0
HSP35 SS
The hydraulic system can run on
synthetic biodegradable or vegetable
oil which significantly reduces harmful
environmental pollution. The hydraulics
incorporate a large return filter ensuring
that any contaminants are captured
and the fuel tank has flushing panels and
a drain facility as well as providing 24hr
running capability. Safety features include
full engine protection and hydraulic shut off
through oil loss.
30
15
120
240
360
480
600
m3/h
SC - Screw,
HSP10
&
HSP20
HS25B
HS50B
HS50D
HS50H
HS75D
HSP20
&
HSP35 S/S
HS75D
HS25H
HS50J
HS100D
HS100S
HS100C
HS150L
HSP35
HSP35 S/S
&
HSP110
HS100SC
HS150D
HS150S
HS150C
HS150SC
HS100H
HS200D
HSP110
HS250D
Seldredge
45
L - Low Head
Seldredge
C RANGE (CHOPPER)
SELPRIME
The Selwood C150 chopper pump is the
ideal solution for pumping solids, sludge
and rags.
Building upon Selwood’s market leading
reputation, the Selwood C150 chopper
pump has been developed with our
key partners in the process, industrial
and water sectors. All have a common
requirement to pump and condition liquids
that contain a high proportion of solids,
organic matter or rags.
The Selwood C150 chopper pump, with its
hardened impeller and cutter (60 rockwell)
plus a cutting action giving 3000 cuts per
minute, is more than capable of meeting
these arduous applications.
C150 Electric
The C150 automatic self-priming diesel has
the choice of either a skid mount or mobile
site chassis for on-site flexibility. It also
comes with Selprime as standard.
C150 Diesel
C150 - CHOPPER PUMP
CHOPPER PUMP -
C150 Diesel
160
140
40
Impeller
Chopping Plate
Volute
Seal Plate
Bearing housing
80
20
High grade SG iron Hardened
to 60 Rockwell
High Carbon Steel Hardened
to 60 Rockwell
Cast Iron
Cast Iron
Aluminium
60
20
15kW
11kW
50
50
100
150
200
250
10
20
m3/h
120
180
240
50
30
20
5
300
60
m3/h
Specification
120
180
240
300
m3/h
C150 Diesel
C150 Electric
C150 Electric / Selprime
Power Required
kW
20
5.5 - 15
7.5 - 18
Pump Speed
rpm
1800
1450
1450
Capacity
m³/h
225
300
300
Suction Lift
m
9.1
-
9.1
Air Handling
l/s
24
-
24
Inlet / Outlet Port
mm
150 / 100
150 / 100
150 / 100
m
37
25
25
Delivery Head
10
11kW
0
ft
40
7.5kW
10
7.5kW
60
60
m 15
30
5
0
ft
40
5.5kW
70
20
60
m 15
80
18kW
15kW
70
20
10
90
25
80
40
10
0
ft
30
90
25
Designed by Selwood. Printed on 170gsm Regency Gloss using a Xerox DocuColor 242.
MATERIALS
100
Updated 6/10 - Alans’ Request
Assumed same as previous
30
120
30
Electric Selprime
C150 Electric / Selprime
3/05 - Pump Launch
Updated 6/10 - Alans’ Request
50
m
CHOPPER PUMP -
Electric
C150 Electric
5/08 - 1800rpm Diesel
Selwood Limited, Bournemouth Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 3ZL. UK
Tel: +44 (0)23 8026 6311 Fax: +44 (0)23 8026 0906
Web: www.selwoodpumps.com E-mail: pumpsales@selwoodpumps.com
P182 5/10