Architectural Material Specif

DUFFY PROPERTIES LLC. BURLINGTON CENTER 154‐160 CAMBRIDGE STREET Burlington, MA Exterior Civil and Architectural Material Specifications & Color Selections Prepared for: Kevin Duffy
Duffy Properties, LLC.
465 Waverley Oaks Road, Suite 500
Waltham, MA 02452
Prepared By: Gorman Richardson Lewis Architects BSC Group Project # 2014034.01 April 19, 2016 TABLE OF CONTENTS: SITE PAVING and ACCESSORIES 1.
2.
3.
4.
RETAINING WALLS: RECON RETAINING WALL SYSTEMS
STAMPED CONCRETE: Unilock Town Hall Pattern
TRASH RECEPTACLES AND BENCHES: DUMOR OR EQUAL
STONE WALL DETAIL
EXTERIOR WALL MASONRY 1. MASONRY VENEER:
a. BRICK – MODULAR SIZE AND STANDARD COURSING
i. BELDEN BRICK COMPANY FACE BRICK, OR EQUAL
1. COLOR – COLONY BLEND
2. COLOR (ACCENT) COLONY FLASH, OR SIMILAR
b. SPLIT/GROUND FACE CMU –
i. JANDRIS – 8X16X4, OR EQUAL
1. COLOR – PAINTED BENJAMIN MOORE HARBOR GRAY OR
EQUAL
2. PRECAST / CAST STONE ACCENT MASONRY ON EXTERIOR WALL:
a. HEADERS, WINDOW SILL ACCENT BANDING & WATER TABLE
i. CUSTOM CAST STONE, OR EQUAL
1. COLOR – NATURAL GREY
EXTERIOR RAILINGS i. BALCONY AND GUARDRAILS
1.
AMERISTAR ECHELON PLUS (42” HIGH), OR EQUAL
a. COLOR – WHITE AND BLACK
2.
SOLID BOARD PVC PRIVACY FENCING ‐ WHITE
WALL FINISH AND TRIM 1. ACCENT TRIM AND BRACKETS (LARGE):
i. PVC/POLYURETHANE – CUSTOM SIZES AND SHAPES
1. SPECTIS MOULDERS INC., OR EQUAL
a. COLOR – GLACIER WHITE OR SIMILAR
ii. PVC/POLYURETHANE TRIM BOARDS
1. AZEK INC., OR EQUAL
a. COLOR – GLACIER WHITE OR SIMILAR
2. SIDING:
i. HORIZONTAL CLAPBOARD – FIBER CEMENT, OR EQUAL
1. JAMIES HARDIE SIDING, OR EQUAL
a. COLOR: SANDSTONE BEIGE / MONTEREY
TAUPE
ii. BOARD AND BATTEN – FIBER CEMENT, OR EQUAL
1. JAMES HARDIE PANELS, OR EQUAL
a. COLOR: SANDSTONE BEIGE / MONTEREY
TAUPE
iii. TRIM BOARDS – FIBER CEMENT, OR EQUAL
1. JAMES HARDIE TRIM, OR EQUAL
a. COLOR - ARTIC WHITE, OR SIMILAR
1
ROOF SYSTEMS 1. ROOFING:
i. STANDING SEAM METAL ROOF
1. ATAS 1 ½”, OR EQUAL
a. COLOR ‐ SLATE GREY
ii. ASPHALT SHINGLE:
1. CERTAINTEED LANDMARK PRO ARCHITECTURAL, OR EQUAL
a. COLOR ‐ WEATHERED WOOD
FENESTRATIONS 1. STOREFRONT WINDOWS/ENTRANCES (BUILDINGS A & B)
i. THERMALLY‐BROKEN ALUMINUM SYSTEM WITH INSULATED
GLASS UNITS
1. WINDOWS – EFCO 403X (2” X 4 ½” PROFILE), OR EQUAL
a. COLOR – CLEAR ANODIZE
2. ENTRANCES – EFCO D302 MEDIUM STILE (3 ½”), OR EQUAL
a. COLOR – CLEAR ANODIZE
2. EXTERIOR WINDOWS AND DOORS:
i. DOUBLE‐HUNG WINDOW UNITS – FIBER‐REINFORCED
1. INTEGRITY ALL‐ULTREX, OR EQUAL
a. COLOR ‐ STONE WHITE
ii. FIXED‐PICTURE WINDOW UNITS – FIBER‐REINFORCED
1. INTEGRITY ALL‐ULTREX, OR EQUAL
a. COLOR – STONE WHITE
iii. IN‐SWING FRENCH DOORS – WOOD AND FIBER‐REINFORCED
1. INTEGRITY WOOD ULTREX, OR EQUAL
a. COLOR – STONE WHITE EXTERIOR / PAINTED
INTERIOR
iv. MAIN BUILDING ENTRY DOORS – ALUMINUM‐CLAD WOOD
1. MARVIN COMMERCIAL CLAD DOORS, OR EQUAL
a. COLOR ‐ COCONUT CREAM EXTERIOR / PAINTED
INTERIOR
v. EXTERIOR STEEL DOORS AND FRAMES
1. REPUBLIC STEEL DOORS AND FRAME F STYLE LEVEL 3
CONSTRUCTION, OR EQUAL
a. COLOR – FACTORY PRIMED/PAINT TO MATCH WALL
vi. GARAGE DOOR – INSULATED SECTIONAL DOOR
1. OVERHEAD DOOR COMPANY THERMACORE DOOR MODEL
594 MEDIUM DUTY (9’HX18’W) WITH INSULATED DSB
GLAZING, OR EQUAL
a. COLOR – WHITE
3. WINDOW GLASS:
i. INSULATED GLASS UNITS
1. GUARDIAN SUNGUARD SUPERNEUTRAL 68
a. COLOR – CLEAR WITH COATING
2
AWNINGS 1. WALL MOUNTED AWNINGS
i. BUILDING A & B – FABRIC WRAPPED WITH METAL SUPPORT
FRAMES
1. VIEWPOINT SIGN AND AWNING WITH SUNBRELLA FABRIC,
OR EQUAL
a. COLOR – VARIES
ii. BUILDING C – STANDING SEAM METAL AWNING WITH METAL
SUPPORT FRAME
1.
VIEWPOINT SIGN AND AWNING WITH 1 ½” STANDING METAL
SEAM ROOF, OR EQUAL
a. COLOR – SLATE GREY
LIGHTING 1. SITE LIGHTING:
i. LED PARKING AREA SITE LIGHT POLES & FIXTURE
1. McGRAW‐EDISON GLEON LED FIXTURE, OR EQUAL
a. COLOR – DARK PLATINUM
2. 15’ McGRAW‐EDISON SQUARE LIGHT POLE, OR EQUAL
a. COLOR – DARK PLATINUM
ii. PEDESTRIAN SCALE LIGHT POLES AND FIXTURE
1. AMERLUX D623 LED LUMINAIRE, OR EQUAL
a. COLOR: SATIN BLACK
2. AMERLUX ABILENE POLE/BASE (10’), OR EQUAL
a. COLOR: SATIN BLACK
iii. PEDESTRIAN BOLLARD LIGHT
1. ACCESS FIXTURE – LED ROUND DOME TOP BOLLARD
2. BUILDING MOUNTED EXERIOR LIGHTING:
i. BUILDING A & B –
1. SIGNAGE LIGHTING – EMBLEM ALUMINUM SHADE WITH
GLASS RE10, OR EQUAL
a. COLOR – BLACK / GLASS – FROSTED
2. ACCENT LIGHTING – LIGMAN USA‐30106 SANDY 6 SURFACE
MOUNTED LUMINAIRE
a. COLOR – BLACK
3. EXTERIOR DOWNLIGHTS SOFFITS/EXTERIOR CEILINGS –
EATON PORTFOLIO DOWNLIGHT LDA4A 4L WITH
EMERGENCY BATTERY, OR EQUAL
a. COLOR – GRAPHITE
4. UNDER‐AWNING – Q‐TRAN LED IP67 TAPE LIGHT –
a. COLOR – 3000K / EXTRUSION IQA‐45DW
ii. BUILDING B ONLY –
1. WALL PACK – McGRAW‐EDISON WALL MOUNTED GALLEON
LED LUMINAIRE
a. COLOR ‐ BLACK
iii. BUILDING C –
1. EXTERIOR WALL MOUNTED SCONCES – LURALINE LIGHTING
LB44 LED, OR EQUAL
a. COLOR – BLACK / DIFFUSER – WHITE ACRYLIC
3
4
SITE PAVING AND ACCESSORIES 5
Design and Construction Reference Manual
ReCon Series 50
Aesthetics You Want…
…Performance You Need!
6
www.reconwalls.com
7
Introduction
At ReCon, we are proud of our tradition of offering a product line
that adds value for our customers, and for our wall design and
wall contractor partners. Whether the ReCon application
focuses on the scale and aesthetics of the ReCon Block, the
durability of the wet-cast, air-entrained concrete, the
considerable gravity wall heights that can be achieved, or the
construction efficiencies associated with our product, it is our
intention to solve site specific challenges and add value.
The design of a ReCon segmental retaining wall may be fairly
straightforward or it may be quite complex and involve a high
degree of geotechnical and/or civil engineering expertise. At first
glance, the steps involved in construction of a ReCon retaining
wall appear relatively simple. In fact, they are; however, it is
critical that these procedures
are done properly if the wall
is to last and perform as
designed. This is due to the
fact that the ReCon units
themselves are often just a
key component in what is a
more complex and interdependent composite
earthen structure. A number
of important variables
must be analyzed before a
proper wall design can be
finalized.
This manual is intended to
provide wall designers,
wall installers and others
with the information useful
in the design, the
construction and cost
estimation of a ReCon retaining wall that will remain attractive
and structurally stable for the duration of its intended design life.
Page 3
8
4/8/2016
Town Hall™ | Unilock
Town Hall™
With Unilock’s ever increasing focus on permeable pavers, Town Hall has been designed to satisfy both traditional and permeable
installation methods while maintaining a historical worn and distressed appearance.
Colors
Burgundy Red
Burnt Clay
Old Oak
3 Color Blend Blended on Site
9
http://unilock.com/products/permeable/town-hall/?region=5
1/6
4/8/2016
Town Hall™ | Unilock
Basalt
Heritage Red
Heritage Clay
Heritage Blend Blended on Site
Shapes & Sizes
Standard
25 cm x 10 cm x 7 cm
9.75" x 3.75" x 2.75"
10
http://unilock.com/products/permeable/town-hall/?region=5
2/6
11
12
NOTES:
* GRANITE RECTANGULAR COURSED ASHLAR
VENEER. GRANITE TO BE PROCESSED INTO
COURSED ASHLAR STONES FROM AVAILABLE
TAILINGS/ REMNANTS.
BLUESTONE CAP WITH
SQUARE EDGE AND
THERMAL FINISH
2'-8"
STAINLESS STEEL PINS
GRANITE RECTANGULAR
ASHLAR VENEER *
2"
CMU GROUTED SOLID
RAKE GROUT JOINTS TO
MAINTAIN DRY FIT
APPEARANCE
20"
SEALANT
FINISH GRADE
GROUT SETTING BED
6" MIN.
CONCRETE BASE
24"
4"
4"
6"
13
COMPACTED GRAVEL
BASE
14
EXTERIOR WALL MASONRY 15
Colony Blend | Red Bricks
Page 1 of 1
EXTERIOR BRICK
Red Bricks: Colony Blend
SPL ID: 00001020
STANDARDS (Meets
grade SW for all)
PLANT 4
FACE BRICK C216
FBS
THIN BRICK C1088
TBS
EXTRUDED THIN BRICK PCI
Smooth
COMP.
CW
16,699 psi 0.76
IRA TEST REPORT
2
Belden Brick recommends using Sure Klean 101 Lime Solvent®
Recommendation
SIZES
TEXTURE
PCI
Cleaning
Standard
TYPE
to clean this product. Alternatively, EaCo Chem NMD 80® can
be used to clean any of our brick.
WIDTH
HEIGHT
LENGTH
THIN FLAT BACK
THIN DOVETAIL
UNITS / SQ. FT.
3 5/8" / 92mm
2 1/4" / 57mm
8" / 203mm
5/8" / 16mm
3/4" / 19mm
6.55
Jumbo Standard
3 5/8" / 92mm
2 3/4" / 70mm
8" / 203mm
5/8" / 16mm
3/4" / 19mm
5.5
Modular
3 5/8" / 92mm
2 1/4" / 57mm
7 5/8" / 194mm
5/8" / 16mm
3/4" / 19mm
6.86
Jumbo Modular
3 5/8" / 92mm
2 3/4" / 70mm
7 5/8" / 194mm
5/8" / 16mm
3/4" / 19mm
5.76
Queen
3 1/8" / 79mm
2 3/4" / 70mm
9 5/8" / 244mm
5/8" / 16mm
3/4" / 19mm
4.61
Any size not listed is unavailable
16
http://www.beldenbrick.com/onlinecatalog/brick-colors/red-bricks/102/colony-blend
3/25/2016
Ground Face CMU - A. Jandris & Sons
Page 1 of 3
GROUND FACE CMU
GROUND FACE CMU
a
Select Page
Ground Face CMU
Polished Series CMU
Weathered Polished Series
Split Face CMU
Smooth Face CMU
MATERIALS
• All Hollow Load Bearing Units shall conform to ASTM C-90.
Fluted & Prism CMU
• All Solid Load Bearing Units shall conform to ASTM C-145.
Acoustical CMU
• All Normal Weight aggregates shall conform to ASTM C-33.
• All Light Weight aggregates shall conform to ASTM C-331.
CPG Spec-Brik
• All Portland Cements shall conform to ASTM C-150.
ARCHITECTURAL CMU – GROUND FACE
Jandris Ground Face CMU are extremely durable, fire and mold resistant, and energy efficient due to high thermal mass. The
characteristics of our locally sourced natural aggregates give Jandris Ground Face Blocks a unique and appealing aesthetic. The smooth
ground face finish of these units works well in structures where a maintenance-free wall system is desired.
These units, available in normal weight and medium weight classifications (dependent upon color), can be used for interior and/or exterior
applications as fully finished walls, banding courses, or combined with other concrete products.
VIEW COLORS »
17
http://jandrisandsons.com/products/ground-face-cmu/
4/11/2016
Masonry Veneers | Custom Cast Stone
Page 1 of 4
PRECAST/ CAST STONE
ACCENT MASONRY
Home
About
Gallery
Keystones
Products Technical
Masonry Veneer
FAQ
Sills
Contact
Watertable/Banding
Wall Coping
Pier Caps
Quoins
Medallions
Balls and Bases
Base/Rail/Newel Posts
Balustrades
Column Capitals/Bases
Column Segments
Tapered Columns
Column Assemblies
Masonry Veneers
Project Worksheets
MASONRY VENEERS
HEADER
18
http://www.customcaststone.com/products/masonry-veneers/
3/25/2016
Masonry Veneers | Custom Cast Stone
Page 2 of 4
24" H X 48"L
19
http://www.customcaststone.com/products/masonry-veneers/
3/25/2016
Sills | Custom Cast Stone
Home
About
Page 1 of 2
Gallery
Products Technical
FAQ
Contact
Keystones
Masonry Veneer
Sills
Watertable/Banding
Wall Coping
Pier Caps
Quoins
Medallions
Balls and Bases
Base/Rail/Newel Posts
Balustrades
Column Capitals/Bases
Column Segments
Tapered Columns
Column Assemblies
Sills
Project Worksheets
SILLS
20
http://www.customcaststone.com/products/sills/
3/25/2016
Watertable Banding | Custom Cast Stone
Home
About
Gallery
Products Page 1 of 4
Technical
FAQ
Contact
Keystones
Masonry Veneer
Sills
Watertable/Banding
Wall Coping
Pier Caps
Quoins
Medallions
Balls and Bases
Base/Rail/Newel Posts
Balustrades
Column Capitals/Bases
Column Segments
Tapered Columns
Column Assemblies
Watertable Banding
Project Worksheets
WATERTABLE BANDING
24" H & 48"H
X 48"L
21
http://www.customcaststone.com/products/watertablebanding/
3/25/2016
22
RAILINGS 23
EXTERIOR RAILINGS
CLASSIC
™
Echelon Plus Classic style boasts traditional extended pickets
with an arrow-shaped spear. These pointed pickets act as a visual
warning to potential intruders.
j
j
3 Rail / 4 Rail options available
Flush or Standard bottom options available
MAJESTIC
™
Echelon Plus Majestic has a contemporary feel that incorporates
a flush top rail which produces a stately and streamlined
appearance. This fence style highlights the landscape by blending
with the surrounding architectural design.
j
j
3 Rail / 4 Rail options available
Flush or Standard bottom options available
GENESIS
™
Echelon Plus Genesis has sleek lines of unaltered square pickets
that are reminiscent of solid vertical bar wrought iron. The
extended flat-topped tips can also be accented with decorative
finials to enhance the fence design.
j
j
4
3 Rail / 4 Rail options available
Flush or Standard bottom options available
24
Learn more online at ameristarfence.com
or by calling 888-333-3422
25
26
WALL FINISH AND TRIM 27
IV.B. PVC POLY/URETHANE TRIM
PRODUCT DESCRIPTION
12'
AZEK Item Number
18'
20'
TRIMBOARD 1-1/4" THICKNESS
1-1/4 x 3-1/2 Trimboard Frontier
AF15004240
1-1/4 x 5-1/2 Trimboard Frontier
AF15006240
1-1/4 x 7-1/4 Trimboard Frontier
AF15008240
1-1/4 x 9-1/4 Trimboard Frontier
AF15010240
1-1/4 x 11-1/4 Trimboard Frontier
AF15012240
RABBETED TRIM
1 x 3-1/2 Rabbeted Trim Traditional
ATR12504216
1 x 3-1/2 Rabbeted Trim Frontier
AFR12504216
1 x 5-1/2 Rabbeted Trim Traditional
ATR12506216
1 x 5-1/2 Rabbeted Trim Frontier
AFR12506216
1 x 7-1/4 Rabbeted Trim Traditional
ATR12508216
1 x 7-1/4 Rabbeted Trim Frontier
AFR12508216
AZEK TO MILL (ATM)
8'
1-1/4 x 9-1/4 AZEK to Mill Traditional
18'
20'
AT15010216
1-1/4 x 48 AZEK to Mill Traditional
AS11448096
BEADBOARD
5/8 x 3-1/2 Beadboard Traditional
AM0620418
1/2 x 5-1/2 Beadboard Traditional
AM0120618F
BUILDING C TOWER BRACKET - 4'H X 1'-6" W X 1'4 PROJ.
SHEET
8'
10'
12'
18'
3/8 x 48 Sheet Traditional
AS03848096 AS03848120
1/2 x 48 Sheet Traditional
AS01248096 AS01248120
5/8 x 48 Sheet Traditional
AS05848096 AS05848120
AS05848216
3/4 x 48 Sheet Traditional
AS03448096 AS03448120 AS03448144
AS03448216
1 x 48 Sheet Traditional
AS10048096 AS10048120 AS10048144
20'
AS10048240
CORNERBOARDS
10'
20'
1 x 3-1/2 Cornerboards Traditional
AMT04120C
AMT04240C
1 x 3-1/2 Cornerboards Frontier
AMF0412OC
AMF04240C
1 x 5-1/2 Cornerboards Traditional
AMT06120C
AMT06240C
1 x 5-1/2 Cornerboards Frontier
AMF06120C
AMF06240C
1-1/4 x 3-1/2 Cornerboards Traditional
AMT12504120C
1-1/4 x 3-1/2 Cornerboards Frontier
AMF12504120C
1-1/4 x 5-1/2 Cornerboards Traditional
AMT12506120C
1-1/4 x 5-1/2 Cornerboards Frontier
AMF12506120C
28
23
HardiePlank ® Lap Siding
Siding
4 in.
324
360
25.0
Exposure
ColorPlus Pcs./Pallet
Prime Pcs./Pallet
Pcs./Sq.
29
NEW
20.0
308
280
NEW
16.7
252
252
PRODUCTS
View all HardiePlank Lap Siding Products
Available Colors
5.25 in. 6.25 in. 7.25 in.
Width
6 in.
12 ft. planks
Length
5 in.
5/16 in.
HardieWrap ®
Thickness
Khaki Brown
SELECT CEDARMILL©
HardiePanel ® Vertical Siding
Soffit
ABOUT JAMES HARDIE
Trim
NEW
14.3
230
210
7 in.
8.25 in.
NEW
NEW
COLOR
NEW
HardieShingle ® Siding
Finishing Touches
HORIZONTAL CLAPBOARD
Trim
Soffit
30
ABOUT JAMES HARDIE
4 ft. x 8 ft.
50
3.2
Size
Pcs./Pallet
Pcs./Sq.
2.8
50
NEW
4 ft. x 9 ft.*
NEW
2.5
50
PRODUCTS
Finishing Touches
NEW
NEW
NEW
COLOR
NEW
®
HardieShingle
Siding
4 ft. x 10 ft.
®
HardieWrap
View all HardiePanel Vertical Siding Products
Available Colors
5/16 in.
Thickness
Evening Blue
SMOOTH
®
HardiePanel
Vertical Siding
*4 ft. x 9 ft. HardiePanel vertical siding only available primed and exclusively in DC/Baltimore and Virginia districts.
®
HardiePlank
Lap Siding
Siding
BOARD AND BATTEN
SIDING
HardieTrim ® Boards
Siding
3.5 in.
240
Width
Pcs./Pallet
31
200
PRODUCTS
View all HardieTrim Boards
Available Colors
12 ft. boards
Length
160
5.5 in.
120
7.25 in.
HardieWrap ®
4.5 in.
1 in.
Thickness
Arctic White
5/4 NT3® SMOOTH
HardieTrim ® Batten Boards
Soffit
ABOUT JAMES HARDIE
Trim
80
80
COLOR
9.25 in. 11.25 in.
Finishing Touches
TRIM BOARDS
32
MONTEREY TAUPE
BOOTHBAY BLUE
LIGHT MIST
SAIL CLOTH
COBBLE STONE
ARCTIC WHITE
TRIM
Color Selection
EVENING BLUE
IRON GRAY
TIMBER BARK
HEATHERED MOSS
NEW
DEEP OCEAN
COUNTRYLANE RED
MOUNTAIN SAGE
NEW
PEARL GRAY
NAVAJO BEIGE
Trim and Soffit Colors
ABOUT JAMES HARDIE
WOODSTOCK BROWN
WOODLAND CREAM
Plank, Panel, Batten and Shingle Colors
Color Inspiration
GRAY SLATE
PRODUCTS
NEW
SANDSTONE BEIGE
AGED PEWTER
NEW
AUTUMN TAN
NIGHT GRAY
KHAKI BROWN
NEW
Color Selection
COLOR
RICH ESPRESSO
NEW
CHESTNUT BROWN
ROOF SYSTEMS 33
VI.A. STANDING SEAM METAL
ROOF
34
35
VI.B. ASPHALT ROOF
SHINGLES
color palette
Silver Birch
Max Def Birchwood
Max Def Cobblestone Gray
Max Def Colonial Slate
Max Def Granite Gray
Max Def Georgetown Gray
Max Def Resawn Shake
Max Def Weathered Wood
Max Def Driftwood
Max Def Burnt Sienna
Max Def Atlantic Blue
Max Def Heather Blend
Max Def Pewterwood
Max Def Moire Black
Max Def Charcoal Black
Landmark Pro Silver Birch is an ENERGY STAR® rated product and may qualify for a federal tax credit.
max def colors
Look deeper. With Max Def, a new dimension is added to shingles with a richer mixture of
surface granules. You get a brighter, more vibrant, more dramatic appearance and depth of color.
And the natural beauty of your roof shines through.
Due to limitations of printing reproduction, CertainTeed can not guarantee the identical match of the actual
product color to the graphic representations throughout this publication.
36
73930_20-20-20_3289NE.indd 3
12/17/15 1:19 PM
FENESTRATIONS 37
STOREFRONT WINDOWS/DOORS
Windows • Curtain Walls • Entrances • Storefronts
Series 403X
2" x 4 1⁄2" Thermal Storefront Framing
Configurations
Shear Block • Screw Spline
This innovative flush glaze storefront framing system utilizes a dual pour and debridge thermal barrier that provides
outstanding energy efficiency. Available in either shearblock or screw spline construction, the 403X Series can
be used in conjunction with virtually all EFCO entrance systems and V410 vents. A variety of options are available
for use with this system, including sunshade mullions and variable sight line horizontals. Steel reinforcement is also
available to enhance structural capability.
Features
Benefits
Dual pocket thermal barrier framing
Enhanced thermal performance and reduced
energy cost
Screw spline or shearblock construction
Decreases installation labor and cost
Ability to erect on the job site
The optional Roto-Vent™ ventilator
Allows fresh air into the room, yet maintains security
2-way (90° and 135°) and 3-way corner mullions
Multifaceted elevations for design flexibility
0°-15° and 15°-30° variable mullions
Increased design flexibility
Accommodates up to 1 1⁄16" glazing
Expands design and energy savings options
Uniform glazing gasket is used for exterior and
interior
Allows optimized use of gasket and reduces
inventory
Simplifies ordering and installation
Various height intermediate horizontals and sills
Ability to maintain desired sight line
Accessory line of perimeter anchors, pocket fillers,
door adaptors, etc.
Increased product versatility
Anodized or painted finishes available
Multiple options to answer economic
and aesthetic concerns
© Copyright 2015 EFCO Corporation 05/15
1000 COUNTY
38 RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com
ULTRAPON, ULTRAFLUR AND ULTRADIZE: APPLICATION, VALUES, FEATURES AND AAMA INFO
Application/Values
Resin/Features
Application
• Full sun and/or high pollution
environments
Specify
Ultrapon® 70% PVDF
For maximum resistance to color fading and chalking.
Values
• Superior resistance to fading and
chalking
• Longest finish life
Application
• High/moderate exposure to UV
• High abuse areas
Ultraflur® 50% PVDF
Approaches the life expectancy of the 70% formulation.
Increased abrasion resistance over 70% resin.
Outperforms silicone polyester, urethane, TGIC powder,
polyester and acrylic coatings.
Values
• Optimizes cost/value ratio
• Resists fading and chalking
Application
• High/moderate exposure to UV
• High abuse areas
Ultradize/Pearlescent Mica® 50% PVDF
Approaches the life expectancy of the 70% formulation.
Increased abrasion resistance over 70% and 50% resin.
Outperforms silicone polyester, urethane, TGIC powder,
polyester and acrylic coatings. Pearlescent mica
provides economical metallic appearance.
Values
• Economical
• Superior resistance to abrasion
All colors* meet or exceed
AAMA 2605.
All colors meet or exceed
AAMA 2604.
All colors meet or exceed
AAMA 2604.
* Certain exotic colors may require a third coat.
COLOR OPTIONS: ANODIZE
EFCO provides a wide range of Class I Anodize Finishes.3
Clear
Champagne
Light Bronze
Medium Bronze
Dark Bronze
Black
ANODIZE MATCHING PAINT FINISHES AND CODES
EFCO Ultralok Finishes
Matching Paint Finishes
Clear Anodized
AND CL1 CLR
A.N. Silver
PNT KCL SP1 (M13-463)
Champagne
ULT CL1 CHP
Dark Champagne
PNT KCL SP1 (KS2C43832PS)
Light Bronze
ULT CL1 LTB
Medium Bronze
PNT KCL SP1 (KS2C31402P2)
Medium Bronze
ULT CL1 MDB
Median Bronze
PNT KCL SP1 (KS2C43855P2)
Dark Bronze
ULT CL1 DKB
Black and Bronze
PNT KCL SP1 (KS2C34122P2)
Black
ULT CL1 BLK
Black
PNT KY2 C36 (KB3C38495)
Your EFCO representative has the knowledge and experience to assist
you with finding the best selection of paint and coatings. For more
information visit www.efcocorp.com, or call EFCO at 1-800-221-4169.
Certified Applicator
39
Colors provided by AkzoNobel
Windows • Curtain Walls • Entrances • Storefronts
BUILDINGS A & B STOREFRONT DOORS
Series D202 Narrow Stile • Series D302 Medium Stile • D502 Wide Stile
2" ThermaStile® Aluminum Swing Entrance Doors
Configurations
Narrow Stile (2 1⁄4") • Medium Stile (3 1⁄2") • Wide Stile (5")
EFCO’s ThermaStile ® entrances are designed to meet specific applications where security, egress, thermal
performance and dual finish capability is required. ThermaStile entrances are joint plug welded at every corner to
provide superior strength in all applications. Offered in narrow, medium and wide stiles, EFCO standard entrances
can accommodate a wide range of applications. Also, multiple glazing options provide flexibility to meet specific
design requirements, and the product’s ability to accommodate most hardware applications increases its versatility.
ThermaStile entrances are thermally isolated, enhancing energy saving potential. EFCO’s ThermaStile ® entrances
provide the complete solution for your fenestration needs.
Features
Benefits
E-Strut™ thermal isolator
Dual finish capability
Exterior corners are true mortise and tenon
Physical interlock between the rails and stiles
increases strength of door
Interior corners are joined by concealed
Improves ability to function correctly in high-usage
reinforcement brackets and deep penetration fillet applications
weld
Accepts most major brands of locking hardware,
panic devices, Rixson HD pivots and continuous
hinges.
Able to comply with special hardware
specifications
Accommodates all surface mounted, concealed
overhead and floor closers
Unrestricted closer choices
Tall bottom rails available
Meets ADA requirements
Variety of cross rails, door sweeps, and crash bars
available
Increases configuration options
Anodized and painted finishes available
Multiple options to answer economic
and aesthetic concerns
© Copyright 2015 EFCO Corporation 05/15
1000 COUNTY
40 RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com
EXTERIOR WINDOWS AND DOORS
All Ultrex
fiberglass interior and exterior
All Ultrex® windows feature fiberglass construction inside and out for superior
strength and durability. Delivering unmatched beauty with the performance that comes with
ENERGY STAR® qualified, NFRC rated and WDMA Performance Grade rated solutions,
All Ultrex windows and doors are truly Built to Perform®.
All Ultrex Series
All Ultrex windows and doors feature exceptionally
durable Ultrex interiors and exteriors for the ultimate
in low-maintenance performance.
All Ultrex Products
Casement & Awning Single Hung Double Hung Glider Round Top
Polygon
Sliding Patio Door
Factory mulling reduces
on site labor and eases
installation.
Non-Operable Lock
renders sash inoperable.
Window Opening
Control Device limits
sash movement for
safety and security.
Sheetrock Return, Jamb
Extensions, Folding Nailing
Fin and J-channel provide
easy installation and finishing.
Sash Limiter permanently
limits sash movement
for safety and security.
Pre-attached Folding
Nailing Fin or Through Jamb
for easy installation
Integrity® Exterior Trim
installs easily on all
Integrity rectangular
windows and doors.
41
10
integrity windows and doors
tripane advantage
The U.S. Environmental Protection Agency ENERGY STAR Most Efficient Program
was designed to recognize products that meet the highest energy-efficiency guidelines.
Integrity® is pleased to have several Tripane products awarded the ENERGY STAR
Most Efficient mark in 2013 for both the Northern and North-Central zones.
®
a full line of windows for any project
Casement
Awning
Glider
Double Hung
Round Top
Single Hung
Polygon
special sizes for commercial windows
Maybe you’re replacing windows on a 120-year-old dormitory. Or perhaps you are adding
a wing to a condominium project and want to match the existing window dimensions.
With Integrity’s production capabilities, we’ve got you covered. Integrity windows are now
available in special sizing down to 1/64". So think big — or think small. There is sure to be an
Integrity window to fit any opening.
42
Commercial PRODUCTs
13
20
Available options
include pre-finish white
or stain ready pine.
Presenting an elegant way to say “welcome.” The
Inswing Door provides a rich wood interior, 8' heights,
an always beautiful Ultrex exterior, and wide stiles and
rails. You’ll appreciate Ultrex sill with oak sill liner and
a classic lever and escutcheon handle set. This door is
virtually maintenance free. Ultrex exterior and sill provides
exceptional strength, stability, and durability.
inswing french door.
WOOD-ULTREX ® series
inswing french door
• 1-, 2- and 3-panel configurations
• Low-maintenance Ultrex exterior; rich wood
interior
FEATURES and benefits
• Multi adjustable hinges for precise installation
• Multiple configurations up to 8' tall
• Handle activated multi-point locking system
IN-SWING FRENCH DOORS
43
24
WU
Trim solutions
Brick Mould Casing
Flat Casing
Choose from 2" Brick Mould Casing
or 3.5" Flat Casing available in a
variety of configurations.
Integrity exterior trim solutions are now offered on all rectangular Wood-Ultrex and All
Ultrex products. Which means the same durability, performance and look you get in your
Integrity windows and doors can be extended into your exterior casing. Create a dynamic
new look knowing your corners and colors will stay true and enhance your overall design.
AU
And, of course, doors are about glass. Choose from
–
–
Integrity’s LoE-180TM or LoE2-272 ® insulated glass
–
with Argon gas or LoE 3-366® with Argon gas. Both
tempered insulated glass with Argon gas or Tempered
obscure insulated glass with Argon gas are available.
The addition of Argon — a colorless and odorless gas —
–
greatly increases the insulating performance of LoE glass.
Door handle sets offer classic styling with multi-point
locking cylinders, available keyed locking cylinders,
and available PVD finishes for superior durability.
Our hardware keeps a low-profile for clean lines and
enhanced security.
Stylish handles. State of the art glass. You sweat the
details — and so do we.
Exercise Your Options.
INTEGRITY FROM MARVIN ®
options
44
Almond Frost
Satin Nickel PVD
* Argon gas not available in high elevations where capillary tubes are required.
**Not available in polygons except direct-glaze rectangles.
All Ultrex door hardware is available in five finish options and features
PVD metal finishes and available with keyed locking cylinders.
DOOR HARDWARE
White
Brass PVD
32" Handle provides 32" net clear
opening on Sliding Patio Doors.
Oil Rubbed
Bronze PVD
Available Stone White interior
and Stone White, Pebble Gray,
Cashmere, Bronze, Evergreen
and Ebony exterior.
Ebony
(exterior)
Variable thickness glass provide enhanced
STC and OITC sound abatement
–
performance. Available in LoE-180 TM,
–2
–3
®
®
LoE -272 or LoE -366
Evergreen
(exterior)
Profiled Grilles-Between-theGlass** are available in several
popular lite cut options (see page
27) for a classic divided lite look
and easy glass cleaning.
GRILLES
Bronze
(exterior)
Every door comes standard with tempered
–
LoE2-272® insulating glass with Argon
–
gas. Optional LoE3-366® for superior
performance and long-term energy costs
–
savings* and LoE-180 TM are also available.
Cashmere
(exterior)
HARDWARE FINISHES
GLAZING
Stone White
(exterior
and interior)
Pebble Gray
(exterior)
all ultrex® standard OPTIONS
ULTREX FINISHES
AU
BUILDING C MAIN ENTRY DOORS
45
46
EXTERIOR STEEL DOORS
Doors and Frames
Standard Door Specifications
Door Styles
F
V
N
G
G2
G3
G4
G6
For complete steel door construction
specifications refer to ANSI/SDI-100.
FG
LI
TLI
LLI
Selection of the appropriate steel
2. Subjection to and degree
of possible abuse
door should be based on the
3. Hardware requirements
following criteria:
NLI
GLI
D
5. Fire code(s) regulations
1. Frequency of use
(low, moderate, high)
4. ADA requirements
VLI
6. Sound retardation and/or
insulation requirements
7. Design and appearance
8. Conformance to local
building codes
Republic Finish Paint Colors
White
Stone White
Cream Buff
Primer
Midnite Bronze
Black
Due to variations in printing processes, actual colors may vary slightly from those pictured. Other colors available upon request.
SDI Classifications
2
Grade
Model
Construction
RBP Series
I
Physical Performance Level C
(1-3/4" and 1-3/8")
Standard Duty
Minimum Gage = 20
1
Full Flush
DM/DL 420, DE820/18
DM/DL 420, DE820/18
II
Physical Performance Level B
(1-3/4" Only)
Heavy Duty
Minimum Gage = 18
1
Full Flush
DM 418, DL 418, DE 418
2
Seamless
DM 418, DL 418, DE 418
1
Full Flush
DL 416, DE 416
III
Physical Performance Level A
(1-3/4" Only)
Extra-Heavy Duty
Minimum Gage = 16
2
Seamless
DL 416, DE 416
IV
Physical Performance Level A
(1-3/4" Only)
Extra-Heavy Duty
Minimum Gage = 14
1
Full Flush
DE 414
2
Seamless
DE 414
47
Phone: 1.800.733.3667
| Fax: 1.800.723.6677 | Web: republicdoor.com
MODELS
591/592/593/594 /596/598/599/8 50
GARAGE DOOR (BUILDING C ONLY)
Model 850
Model 596
Models 591/592/599*
,
*Flush panel only
Model 593
Model 850
Model 594
Model 598
Models 596/599
Models 591/592
Hot -Dipped
Galvanized
Roll-Formed Steel
CFC-Free
Polyurethane
Core
Hot -Dipped
Galvanized
Roll-Formed Steel
CFC-Free
Polyurethane Core
PVC
Hinge
PVC
Hinge
Integral Steel
Hinge Mounting
Strip
Integral Steel
Hinge Mounting
Strip
Section A-A
Section A-A
Models 593/594
Model 598
S0002XXX
detasil
Hot -Dipped
Galvanized
Roll-Formed Steel
CFC-Free
Polyurethane
Core
Hinge
Intermediate
EPDM
Rubber Seal
Hot Melt
Sect A-A
Sect. Doors - Thermacore
Panel Detail
OCST591 Sec A-A
Hot -Dipped
Galvanized
Roll-Formed Steel
CFC-Free
Polyurethane Core
Hinge
Hot Melt
Integral Steel
Hinge Mounting
Strip
Integral Steel
Hinge Mounting
Strip
Section
48A-A
www.OverheadDoor.com
Sect A-A
3
T HERMACORE ® D OOR S YSTEMS
INSULATED SECTIONAL DOORS
Panel and glazing options for models 592 / 591 / 593 / 598
Aluminum Sash Section
with DSB glazing*
Double Thermal Acrylic
(25” w by 12” h)
Ribbed panel
Insulated DSB
(24” w by 7” h)
Clear Long** (44” w by 15” h)
* Not available on Model 598
**Not available on doors wider than 20’2”. Not available on Model 591.
Panel and glazing options for model 594
Insulated DSB
(20.75” w by 15” h)
Aluminum Sash Section
with DSB glazing
Raised panel
Panel and glazing options for models 596 / 599
Aluminum Sash Section
with DSB glazing
Double Thermal Acrylic
(25” w by 12” h)
Flush panel
Insulated DSB
(24” w by 7” h)
Clear Long* (44” w by 15” h)
*Not available on doors wider than 20’2”.
Panel and glazing options for model 850
Large Lites (25" w by 13" h)*
Insulated (24" w by 6" h)
Both lites available with insulated glass, insulated tempered glass or multi-wall polycarbonate clear
glazing (brown, white or clear ). Black frame is standard.
*Color matched frames are available.
Microgroove, texture
Contact your local Overhead Door Distributor or refer to the Overhead Door Architectural Design
Manual for specific glazing detail.
49
4
Page 1 of 1
WINDOW GLASS
North America
Guardian.com
Search
Products
Projects
Tools and Resources
Supply Network
About Guardian SunGuard
Contact Us
Order Samples
Home » Products » Product Detail
SuperNeutral 68 (#2)
SuperNeutral Low-E
Outboard Substrate
Clear
Inboard Substrate
Clear
Exterior Appearance
Clear
Transmitted Color
Reflected Color
Add IS 20 to Surface #4
Transmission
Heat Gain
Visible Light %:
68
Relative Heat Gain:
90
UV %:
30
Shading Coefficient:
0.43
Solar Energy %:
33
Solar Heat Gain Coefficient:
0.38
Light-to-Solar Gain:
1.80
Reflectivity
BioSquare Boston
Boston, MA
Visible Light Out %:
11
U-Value
Visible Light In %:
12
Winter Nighttime Argon:
0.25
Solar Energy %:
33
Winter Nighttime Air:
0.29
Summer Daytime Air:
0.28
Thermal Stress Guidelines
Outboard Lite
Inboard Lite
Click here to view product literature
Order a Sample
Short-Form Summary
Download BIM
Send to Colleagues
Contact a Guardian Architectural Design Manager
For Technical Support Call 1-866-GuardSG (482-7374) or email us.
Color Disclaimer: Displayed colors are intended to represent actual color. Color is a function of light and reflectivity and cannot be
accurately portrayed online. Actual glass samples should be used to determine color. Please order a sample and discuss color
with your Guardian Architectural Design Manager to ensure you are pleased with your SunGuard selection before ordering glass
for your project.
This SunGuard lite must be tempered or heatstrengthened
Exercise caution when using annealed
SunGuard products, heat-strengthening or
tempering may be required
Go with annealed SunGuard products
NOTE: The thermal stress guideline is only a rough
guide to the thermal safety of a glazing. Other factors
such as large glass areas, shapes and patterns, thick
glass, glass damaged during shipping, handling or
installation, orientation of the building, exterior shading,
overhangs/fins that reduce wind speed, and areas with
high daily temperature fluctuations can all increase the
probability of thermal breakage. The results shown are
not for any specific glazing installation and do not
constitute a warranty against glass breakage.
Performance Comparison
Tool
Compare hundreds of SunGuard
products options for almost any
type of glass makeup.
Get the info you need »
Call Us Today: 1-866-GuardSG (482-7374)
Guardian SunGuard
Guardian Product Sites
Member Login
Guardian Industries Corp.
Home
Guardian Select Fabricator
Products
Glazier Connection
2300 Harmon Rd.
Projects
Select Commercial Window
Auburn Hills, MI 48326-1714
Tools & Resources
Supply Network
Privacy Policy | Terms of Use | Site Map
About SunGuard
Copyright @2016 Guardian Industries Corp. All rights reserved.
50
https://www.guardian.com/commercial/Products/ProductDetail/index.htm?id=11000044
4/11/2016
AWNINGS 51
52
Hopkinton, Ma.
Location:
Metric Corp
Job:
36”
36”
File:
Wayne
Account Manager:
36”
36”
Designer:
Doug Devine
Sep. 6, 2012
Date:
Sep. 13, 2012
Revisions:
116”
VARIES
Total Awnings 9
Revisions:
Top of awning attachment
Z - bracket w/ hardware as
specified below per wall surface
Awning 1
Awning 4
Awning 3
36”
36”
Side Profile
6”
** Awning mounting point
bottom of awnings inline with
top of 5 1/2” trim board
Awning 5 Awning 6 Awning 7
Building Top View
Awning 8
Awning 9
Awning 10
Awning 11
Awning 12
Awning 13
Frames : 1” Alum. Staple extrusion
Fabric : Sunbrella 6008 Black - Awnings on brick
Sunbrella 4790 Forest Green Fancy - Awnings on Wood
Adjustable return arms
2. Attachment of return arms
Soldier course brick - 5/16” x 3” sleeve
anchors.
1. Attachment of return arms
Wood clapboard - No.14 x 3” wood screws
Awning 2
FABRIC
THIS PROPOSAL DRAWING CONTAINS ORIGINAL ELEMENTS
CREATED BY VIEWPOINT SIGN AND AWNING. ALL RIGHTS RESERVED.
UNAUTHORIZED DUPLICATION OR REPRODUCTION IS PROHIBITED.
Sunbrella 4790 Forest Green Fancy
VARIES
146”
Sunbrella 6008 Black
Total Awnings 4
Total of adjustable return arms
39
2 outers - 1 center per
FABRIC WRAPPED ANWING W/
SUNBRELLA FABRIC
LIGHTING 53
BUILDING CSTANDING SEAM
METAL ROOF(SAMPLE IMAGE)
54
GalleonTM
LED Area and Site Luminaire
55
PARKING AREA SITE
LIGHT POLE & FIXTURE
D ES C R IPTION
The Galleon™ LED luminaire delivers exceptional performance in a
highly scalable, low-profile design. Patented, high-efficiency AccuLED
Optics™ system provides uniform and energy conscious illumination to
walkways, parking lots, roadways, building areas and security lighting
applications. IP66 rated and UL/cUL Listed for wet locations.
McGraw-Edison
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
El e c tri c a l
Extruded aluminum driver
enclosure thermally isolated from
Light Squares for optimal thermal
performance. Heavy-wall, diecast aluminum end caps enclose
housing and die-cast aluminum
heat sinks. A unique, patent
pending interlocking housing and
heat sink provides scalability with
superior structural rigidity. 3G
vibration tested. Optional toolless hardware available for ease
of entry into electrical chamber.
Housing is IP66 rated.
LED drivers are mounted to
removable tray assembly for ease
of maintenance. 120-277V 50/60Hz,
347V 60Hz or 480V 60Hz operation.
480V is compatible for use with
480V Wye systems only. Standard
with 0-10V dimming. Shipped
standard with Eaton proprietary
circuit module designed to
withstand 10kV of transient line
surge. The Galleon LED luminaire
is suitable for operation in -40°C
to 40°C ambient environments.
For applications with ambient
temperatures exceeding 40°C,
specify the HA (High Ambient)
option. Light Squares are IP66
rated. Greater than 90% lumen
maintenance expected at 60,000
hours. Available in standard 1A
drive current and optional 530mA
and 700mA drive currents.
Optics
Patented, high-efficiency
injection-molded AccuLED
Optics technology. Optics are
precisely designed to shape
the distribution maximizing
efficiency and application spacing.
AccuLED Optics create consistent
distributions with the scalability
to meet customized application
requirements. Offered standard
in 4000K (+/- 275K) CCT 70 CRI.
Optional 6000K CCT and 3000K
CCT.
Mounti ng
STANDARD ARM MOUNT:
Extruded aluminum arm includes
internal bolt guides allowing for
easy positioning of fixture during
assembly. When mounting two
or more luminaires at 90° and
120° apart, the EA extended arm
may be required. Refer to the
arm mounting requirement table.
Round pole adapter included.
For wall mounting, specify wall
mount bracket option. 3G vibration
rated. QUICK MOUNT ARM: Arm
is bolted directly to the pole and
the fixture slides onto the quick
mount arm and is secured via a
single fastener, facilitating quick
and easy installation. The versatile,
patent pending, quick mount
arm accommodates multiple drill
patterns ranging from 1-1/2” to
4-7/8”. Removal of the door on the
quick mount arm enables wiring of
the fixture without having to access
the driver compartment. A knockout enables round pole mounting.
GLEON
GALLEON LED
Fin ish
1-10 Light Squares
Housing finished in super durable
TGIC polyester powder coat paint,
2.5 mil nominal thickness for
superior protection against fade
and wear. Heat sink is powder
coated black. Standard colors
include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available.
Solid State LED
AREA/SITE LUMINAIRE
Warran ty
Five-year warranty.
D IMENS IONS
3-15/16"
[100mm]
CERTIFICATION DATA
21-3/4" [553mm]
“A”
DIMENSION DATA
"B"
D RIL L ING P A T T E RN
“A”
Width
“B”
Standard
Arm Length
“B”
Optional Arm
Length 1
Weight
with Arm
(lbs.)
1-4
15-1/2"
(394mm)
7"
(178mm)
10"
(254mm)
33
(15.0 kgs.)
0.96
5-6
21-5/8"
(549mm)
7"
(178mm)
10"
(254mm)
44
(20.0 kgs.)
1.00
7-8
27-5/8"
(702mm)
7"
(178mm)
13"
(330mm)
54
(24.5 kgs.)
1.07
9-10
33-3/4"
(857mm)
7"
(178mm)
16"
(406mm)
63
(28.6 kgs.)
1.12
Number of
Light Squares
UL/cUL Wet Location Listed
ISO 9001
LM79 / LM80 Compliant
3G Vibration Rated
IP66 Rated
DesignLights ConsortiumTM Qualified*
EPA
with Arm 2
(Sq. Ft.)
TYPE "N"
2"
[51mm]
1-3/4"
[44mm]
3/4" [19mm]
Diameter
Hole
7/8" [22mm]
(2) 9/16" [14mm]
Diameter
Holes
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120V-277V 50/60Hz
347V & 480V 60Hz
-40°C Min. Temperature
40°C Max. Temperature
50°C Max. Temperature (HA Option)
ER
C
*www.designlights.org
YS
TEM
D
56
S
S
NOTES: 1. Optional arm length to be used when mounting two fixtures at 90° on a single pole. 2. EPA calculated
with optional arm length.
TIFIE
TD500020EN
2016-01-29 10:56:52
Design Excellence
Stepping Up to the Challenge
The Galleon LED luminaire delivers exceptional performance in a highly scalable, low-profile design. The patented, high-efficiency
AccuLED Optics™ system provides uniform and energy-conscious illumination to walkways, parking lots, roadways, building areas and
security lighting applications. With HID equivalents ranging from 100W up to 1000W, the Galleon LED luminaire is designed to meet the
toughest lighting challenges.
Construction
Finish
• Extruded aluminum driver enclosure
• Heavy-wall die-cast aluminum end caps
• 3G vibration rated
• IP66-rated housing and LED Light Squares
• Optional tool-less entry
• Five-stage, super durable TGIC paint resists extreme weather
conditions while providing optimal color and gloss retention.
It's available in standard grey or optional bronze, black, dark
platinum, graphite metallic or white.
Electrical
• Operates in -40°C to 40°C ambient with optional high ambient
50°C ambient configuration
• Proprietary circuit module designed to withstand 10kV of
transient line surge
• >L90 60,000 hours at 40°C, compliant with IESNA TM-21
• 120V-277V 50/60Hz, 347V 60Hz or 480V 60Hz operation
• Standard with 0-10V dimming driver(s)
• Optional occupancy sensor
• Optional wireless control and monitoring system
A 10kV common surge (line-to-ground) and
differential surge (line-to-line) mode
protection is standard.
Bronze
Black
Dark Platinum
Graphite Metallic
White
Warranty
Controls
Surge Protection
Grey
• Five-year warranty
NEMA Twistlock Photocontrol
Receptacle
Optional gasketed receptacle for mounting
standard NEMA photocontrol
(order separately).
57
3
Light Square Trim Plate Finish
An optional finish to match LED trim plates
to the housings exterior allows luminaire to
blend seamlessly in any site lighting
application.
D623 LED LUMINAIRE
PEDESTRIAN SCALE
LIGHT POLE AND
FIXTURE
D623
LED
U.9.22.14
DESCRIPTION:
The D623 Luminaire is a versatile six sided post top
lantern that is best suited for poles under 10' in height.
LED LUMINAIRE:
Multiple LED systems available with convection cooled driver, options for intensity,
distribution and color. They operate with over voltage and short circuit protection
and automatic voltage sensing for 120 to 277v input. (See next page for LED availability)
• 50,000+ hours of operational life
• Warm 3000K, neutral 4000K, or cool white 5000K color
• Dimmable (controller by others)
• Suitable for wet locations
INSTALLATION:
The luminaire will mount to a 3" OD post or tenon with 5/16" black oxide
coated stainless steel set screws to ensure a solid connection.
LENSES:
• Clear Acrylic (CA)
• Prismatic Acrylic (PA)
• Textured Acrylic (TA)
• White Acrylic (WA)
PROJECT:
TYPE:
EPA:
1.81
FINISH:
Premium quality thermoset polyester powdercoat
for a durable finish in the following:
Standard:
Premium:
BLK - Satin Black
CLB - Classic Bronze
GRN - Green
TBK - Textured Black
ATC - Antique Copper
GTG - Granite Green
WHT - White
14"
30"
Electrostatic sensitive device.
observe precautions for handling
Ordering Information:
Model
Lens
LED
System
Light
Distribution
Order
Code
Finish
D623
CA
PA
TA
WA
AVI
VLE
AS
SY
3H,4H,5H
3L,4L,5L
ATC,BLK
CLB,GRN
GTG,TBK
WHT
•
Fax: 281.997.5441
•
PCL
CHM
Part String
(LSK & HLE only)
Example: D623/CA/LSK-SY-3H/BLK
See next page for more complete ordering options
800.364.0098
Option
www.amerluxexterior.com
58
Amerlux reserves the right to change details that do not affect overall function and performance.
FLU T ED AN D TAPE RED
Our cast poles are fluted and tapered for a Neoclassical look. They have a larger circumference that tapers to 3" tenons to
fit all our luminaires. Also, they come in fixed heights within a particular series so it’s important to check their measurement
to determine if they fit the specifications for their intended site.
Like their extruded counterparts they have optional dusk to dawn photocells, and exterior and interior grounded outlets.
They are also heavier and can hold larger luminaires, and comfortably support double bracketed lights.
Finishes in standard, premium, and custom order make these poles an easy-to-use component on any tree-lined boulevard
or broad avenue. They are the best choice for that small town and historical look that so many communities desire.
Sweetwater
Square 14"
Sweetwater
Square 19"
Sweetwater
Square 19H
Sweetwater
Abilene 17"
6" to 4"
5 1/2" to 3 1/2"
6 7/8" to 4 1/4"
6 7/8" to 4 1/4"
6" to 4"
Tapered
Fluted
Cast
Aluminum
Shafts
26"
26"
B
16 3/8"
17 1/4"
Height
D1010-S14
D1012-S14
19"
19"
14"
Height
Height
D1011-S19
10'-9"
D1010-S19H
9'-9"
D1013-S19
12'-9"
D1012-S19H
12'-6"
D1014-S19
14'-4"
D1014-S19H
14'-3"
9'-11"
11'-11"
A
59
17"
Height A
D1010-20
D1012-20
D1012-23
D1014-25
D1016-25
9'-6"
12'-3"
12'-4"
14'-0"
16'-0"
20"
20"
23"
25"
25"
B
22"
22"
24"
24"
24"
Height
D1310
10'-0"
D1312
12'-0"
D1314
14'-0"
SIGNAGE LIGHTING
E MBL E M
R E 8, R E 10, R E 12
Aluminum Shade w/ Glass and Guard Options
½” IP and ¾” IP Arm Options
UL Wet Location Listed
Fixture
• Aluminum Shade
• Incandescent and Fluorescent Lamp Options
• Glass and Guard Options
Finishes
• Shade, Arm and Stem Finish Options
• See Reverse Side of Sheet for Finish Options
Mounting
RE8
• ½” IP and ¾” IP Arms Available
RE10
RE12
• Stem Options
9 ³∕8"
11 5 ∕8"
8"
ordering example
(fixture
and mounting shown, right image)
13"
10"
12"
30°
pipe
cat no.
lamp
finish
2
RE10
GU2426
TBZ
/
pipe
mounting
finish
2
SL23
TBZ
30°
30°
½" IP, Emblem 10", 26W GU24, Textured Bronze Shade ½" IP, Small Loop 23", Textured Bronze
cat no.
pipe
lamp / ballast
shade / arm finish
2
½" IP
RE8
M
Incandescent Med Base 100W max
3
¾" IP
RE10
GU24131
13W GU24 Base, 2700K, 120V
RE12
GU24181
18W GU24 Base, 2700K, 120V
GU2426
26W GU24 Base, 2700K, 120V
1
LAMPS/LEDS INCLUDED
1
GU24321,6
32W GU24 Base, 2700K, 120V
GU24421,6
42W GU24 Base, 2700K, 120V
LED121,11
12W COB LED, 2700°K 90 CRI,
120V, 840 Lumens
LED181,11
18W COB LED, 2700°K 90 CRI, 120V,
1260 Lumens
6
All Standard and
Specialty Finishes
Coastal Finish Option –
Add “-C” to end of
order number
Specify finish for Shade
and Arm separately as
in the example above.
Cage or Guard finish
will match Shade finish.
11
NOT FOR USE IN GLASS/CASTGUARD/WIRE CAGE ENCLOSURES pipe
cat no.
lamp/ballast
shade finish
2
RE10
FC32
TBZ
accessories
accessory
CG
Clear Glass
FG
Frosted Glass
OG
Opal Glass
CGG
Clear Glass w/ Cast Guard
FGG
Frosted Glass w/ Cast Guard
OGG
Opal Glass w/ Cast Guard
CGWC
Clear Glass w/ Wire Cage
FGWC
Frosted Glass w/ Wire Cage
OGWC
Opal Glass w/ Wire Cage
WG
Wire Guard
FROSTED GLASS (FG) INCLUDED
mount pipe
mount
mount finish
2
SL23
TBZ
Project
Fixture Type
TROY
•
M
AD
LIGHTING
N
E I
N C ALIFOR
IA
Location
•
A Division of Troy-CSL Lighting, Inc.
14508 Nelson Avenue City of Industry, CA 91744
60
Copyright © 2015 Troy-CSL Lighting, Inc.
www.TroyRLM.com T: 626.336.4511 F: 626.330.4266
Contact
Phone
Product data have been exported from - Access Fixtures
Export date: Mon Apr 11 13:38:25 2016 / +0000 GMT
11w LED Round Dome Top Bollards with Reflector 120v
SKU: AF33XBOR3-EIKO
Product Page: http://www.accessfixtures.com/p/11w-led-round-dome-top-bollards-with-reflector-120v/
Product Attributes
- Dimensions: 7 x 7 x 42.25 in
- Weight: 27 lbs
- Availability: Typically ships in 30 business days
- Color Rendering Index (cri): 80
- Available Finishes: Black, Bronze, Custom RAL
- Ballast: Self-ballasted
- Color Temperature (k): 2700K, 3000K, 4000K
- Components: Screw-In
- Features: Dimmable
- Lamp Included: Lamp is included.
- Led Type: Screw-in LED
- Lens: Clear polycarbonate lens
- Light Source: LED
- Listings: CSA: Wet Location
- Light Source Lumens: 1100
- Mounting: Mounting kit with 8" anchor bolts included
- Reflector: Standard Reflector
- Socket: Porcelain 4KV pulse rated medium base socket with nickel-plated screw shell
- Style: Round Bollards, Dome Top
- Total Lamp Watts: 11
- Voltage: 120v
61
[ Export product details as PDF file has been powered by WooCommerce PDF & Print plugin. ]
| Page 1/1 |
LUMINAIRE SPECIFICATION
Tel: 503-645-0500
Head Office:
Fax: 503-645-8100
7144 NW Progress Ct
Hillsboro, Oregon 97124
www.ligmanlightingusa.com
ACCENT LIGHTING
USA-30106
IP65 : Suitable for Wet Locations
IK09 : Impact Resistant (Vandal Resistant)
Sandy 6 surface mounted luminaire
A range of small and large circular wall mounted bulkheads with polycarbonate
diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle
chamfered frame and it can be given a more striking appearance by way of different
grill and visor options.
Low copper content corrosion resistant die-cast aluminum housing and frame.
Stainless steel screws. Durable silicone rubber gasket and impact resistant UV
stabilized polycarbonate diffuser. Housing is treated with a chemical chromatized
protection before powder coating, ensuring high corrosion resistance. Integral
electronic control gear.
Physical Data
Diameter: 10.47”
Weight: 3.7 lbs
Lamp
SPIRAL CFL 15w
(For More Lamp options including LED, please Consult the Catalogue,
Website or Contact The Ligman Lighting Factory)
10.47”
Voltage (Please Specify)
10.47”
120V
277V
Other ___________
Color (Please Specify)
4.13”
01-Black - RAL 9011
03-White - RAL 9003
05-Matt Silver - RAL 9006
06-Bronze - RAL 6014
01
10.47”
02
03
04
02- Dark Grey - RAL 7043
04 - Metallic Silver - RAL 9006
07- Custom - RAL __________
05
06
4.92”
SCE - Surface Conduit Entry Box -
1/2” Conduit
Ø 0.22”
Mounting detail
Ordering Example : USA - 30106 - Spiral CFL-15w - 120v - Options
PROJECT:
TYPE:
Rev: 11/13
QUANTITY:
62
NOTE:
Ligman Lighting USA reserves the right to change specifications without prior notice, please contact factory for latest information.
Due to the continual improvements in LED technology data and components may change without notice.
DATE:
3/4” Conduit
EXTERIOR DOWNLIGHTS
Portfolio
D ES C R IPTION
Low brightness 4-1/2” aperture LED adjustable accent fixture with choice
of distribution. Adjustment mechanism enables the LED beam to pivot
through the center of the aperture at the ceiling line, allowing maximum
light output with no flashback. Offered with flat cut, adjustable accent,
pinhole, and lensed wall wash trims.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
Lo w e r R e f l e c t o r
Spun 0.050” aluminum. Available
in a variety of Alzak® and painted
finishes. Two torsion springs pull
trim tight to ceiling. Truncated
adjustable cut cone allows for
full tilt range and flexibility.
Lensed wall wash provides even
illumination on vertical surfaces.
Pinhole includes black oculus to
control glare.
Upper Reflector
Field interchangeable optics in 15º,
25º or 35º provides smooth beam
without color separation. Media
holder fits onto upper reflector and
holds up to two lens media.
Trim Ring
Self flanged or white polymer trim
ring.
A d j u s t m e n t M e c ha ni s m
Stable aiming and locking
mechanism allows smooth
362° rotation and 40° elevation
adjustment. Aiming scale enables
consistent setting across multiple
fixtures.
H ou s i n g
One piece die cast 1-1/4” deep
collar.18 gauge CRS housing is
painted matte black to eliminate
stray light. Housing is toolless top
accessible.
U ni v e rs a l Moun ting B racket
Accepts 1/2” EMT, C Channel, T
bar fasteners and hanger bars.
Provides 5” total adjustment.
The rma l
Aluminum heat sink conducts heat
away from the LED module for
optimal performance and longer
life.
L ED
LED system contains a plurality
of high brightness white LED’s
combined with a high reflectance
upper reflector producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LED’s are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses.
Co d e Co mplian ce
Thermally protected and cULus
listed for damp locations with
flat cut, pinhole or angle cut and
wet location covered ceiling
with lensed or lensed wall
wash. Optional City of Chicago
environmental air (CCEA) marking
for plenum applications. EMI/RFI
emissions per FCC 47CFR Part
18 Class B consumer limits. 2800
lumen Non-IC rated - Insulation
must be kept 3” from top and sides
of housing. IC rated up to 1800
lumen. RoHS Compliant. 2800
lumen and above spacing and
must follow spacing requirements.
Photometric testing completed
in accordance with IES LM
79 standards. LED life testing
completed in accordance with LM
80 standards.
LDA4A 4L
900, 1300, 1800, 2800 Lumen LED
STEPREPEAT>
4-Inch
Adjustable
Slope
Warran ty
Wall Wash
5 year warranty.
New Construction
ENERGY DATA
D ri v e r
Sound Rating: Class A standards
Combination 120-277V 0-10V or
120V trailing edge phase cut driver
provides flicker free dimming from
100% to 10%. Optional 1% 0-10V,
Fifth Light, or DMX. Driver can be
serviced from above or through the
aperture.
T ambient -40 + 40°C
Power Factor: >0.90
THD < 20%
900 Lumen
120V
277V
Input Power
13.8W
15.0W
Input Current
0.12A
0.06A
0.49A
0.85A
Inrush Current
1300 Lumen
120V
277V
Input Power
22.9W
22.9W
Input Current
0.19A
0.09A
Inrush Current
0.72A
0.53A
1800 Lumen
18-1/2"
[469mm]
23-3/8"
[593mm]
120V
277V
Input Power
29.1W
29.4W
Input Current
0.24A
0.12A
0.79A
1.09A
Inrush Current
2800 Lumen
18" [456mm]
120V
277V
Input Power
44.5W
44.2W
Input Current
0.37A
0.17A
Inrush Current
1.09A
1.23A
7-7/8"
[200mm]
9-1/8"
[232mm]
5-3/16"
[132mm]
5-11/16"
[144mm]
Refer to ENERGY STAR® Qualified
Products List.
18" [456mm]
63
PS520001EN
2015-11-24 09:13:05
BUILDING C WALL
MOUNTED SCONCES
PROJECT:
LB44 H: 15
FIXTURE TYPE:
W: 8
Decorative • LED
SPECIFICATIONS
HOUSING:
DIFFUSER:
LIGHT SOURCE:
MAX WATTS:
ELECTRICAL:
Injection-molded polypropylene
White Acrylic
LED
13
LED - Includes 50,000 Hr. DOB light engine, each with integrated
120V HPF constant current driver.
MOUNTING: Mounts over 4" recessed outlet box
CERTIFICATION: Manufactured in accordance with U.L. standard 1598
Suitable for wet locations
ORDERING INFORMATION
LB44
MODEL
DIFFUSER
LIGHT SOURCE
DIFFUSER
LIGHT SOURCE
White Acrylic
L13 DOB
13W/30K 910 lumen LED
NOTES: Specifications subject to change without notice.
800-940-6588
Sales@luraline.com
www.luraline.com
64
FINISH
EXTRAS
STANDARD FINISH
EXTRAS (Order Separately)
BL - Black
WH - White
PCE1 Factory installed 120V
PHOTOCELL - Only available
with ELECTRONIC CF Light
Sources