AGB75LC04-QU-E - Amulet Technologies

Highly Integrated Amulet GEM Graphical OS
Chip TM for Color Graphical User Interfaces
COLOR CHIP FAMILY
AGB75LC04-QU-E
AGB75LC04-BG-E
Data Sheet
Introduction:
Amulet’s new GUI processor for color displays
enables OEMs and design firms to take their
products to the next level by implementing
interactive color-rich GUIs designed in dynamic
HTML. The GEM Graphical OS Chip TM includes
all of the hardware and software required to turn
a color LCD and touch panel into a user interface.
Amulet’s solution is perfect for many embedded
system applications, including appliances,
consumer electronics, industrial controls, medical
equipment and office automation.
The accelerated graphic memory architecture
allows for concurrent access to 3 individual
memory subsystems for simultaneous program
execution, LCD refresh, and frame buffer
rendering.
Features:
• Integrated LCD Controller Supports Passive
and Active displays up to 24 bits per pixel
• USB 2.0, TWI, UART, and SPI Interfaces
• Power Management Controller for Low Power
Operation
• Directly Connects to 4- and 5-wire Resistive
Touch Panels
• Up to 45 General Purpose IO Lines in BGA
• Drag-and-drop GUI Creation in Dynamic
HTML
• PNG, GIF, and JPEG Image, and GIF
Animation Support
• Built-in Royalty-free Graphical Operating
System
• Inexpensive Development Tools
• PC Based UI Simulator Available to SimplifyUI
Prototyping
• Built-in copy protection option to protect unauthorized duplication of user’s product
AGB75LC04
Datasheet 2.3 - 0311
2
Typical Application Circuit
Cloak
Crystal
(12 MHz)
3.3V
and
1.2V
Power
Supply
Amulet Color
Chip
SDRAM*
Reset
Dataflash*
* Typical Serial Flash: Atmel AT45DB321D
* Typical SDRAM: ISSI IS42S32200E-6TL
3
Package and Pinout
3.1 208-pin PQFP Package (Top View)
AGB75LC04
Datasheet 2.3 - 0311
AGB75LC04
Datasheet 2.3 - 0311
3.11
Device and 208-pin PQFP Package Maximum Weight
5670.1
3.12
208-pin PQFP Package Characteristics
Moisture Sensitivity Level
3.13
mg
3
Package Reference
JEDEC Drawing Reference
JESD97 Classification
MS-029
e3
3.2 225-pin BGA Package
0.12
X
0.10
A1 BALL PAD CORNER
0.10
4X
Z
Z
Z
A
D
&b
& 0.15 M
Y
& 0.08
M
Z X Y
Z
E
Seating Plane
A2
Top View
Side View
A1 BALL PAD CORNER
Common Dimensions
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
(Unit of Measure = mm)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
0.90 REF
e
0.90 REF
Bottom View
(225 Solder Balls)
AGB75LC04
Datasheet 2.3 - 0311
e
Symbol
MIN
NOM
MAX
NOTE
13.00 BSC
D
13.00 BSC
E
A
_
_
1.70
3
A1
0.25
_
_
3
A2
0.85
_
_
0.80 BSC
e
b
0.45
0.50
0.55
4
AGB75LC04
Datasheet 2.3 - 0311
3.21 Device and 225-ball LFBGA Package Maximum Weight
365.2
3.22
225-ball LFBGA Package Characteristics
Moisture Sensitivity Level
3.23
3
Package Reference
JEDEC Drawing Reference
JESD97 Classification
3.24
mg
MO-205
e1
Soldering Information
Ball Land
Soldering Mask Opening
0.530 mm +/- 0.03
0.370 mm to 0.03 mm
Note:
1
The top package body size may be smaller than the bottom package size by as much as 0.15 mm
2
Dimensions D1 and E1 do not include mold protrusions. Allowable protrusion is 0.25 mm per side. D1
and E1 are maximum plastic body size dimensions including mold mismatch.
3
Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall not cause the
lead width to exceed the maximum b dimension by more than 0.08 mm. Dambar cannot be located on the lower
radius or the foot. Minimum space between protrusion and an adjacent lead is 0.07 mm.
3.3 Pin Descriptions
Pin Name
Power Supplies
VCC 3.3V
VCORE 1.2V
GND
Clocks, Osillators and PLL
Main OSC XIN
Main OSC XOUT
PLLA Filter Input
Shutdown, Wake-up Logic
Shut Down Control
Wake-up Control
Reset
/Reset
External Bus Interface
DATA0 - DATA31
ADDR0 - ADDR12
SDRAM
DQM0
DQM2
Pin Name
SDRAM BSO
SDRAM BS1
SDRAM CLK
SDRAM CLK EN
SDRAM WE
SDRAM RAS
SDRAM CAS
SDRAM ADDR10
SDCS
A2D/GPIO
A2D Ref
Touch YTouch XTouch Y+
Touch X+
A2D
AGB75LC04
Datasheet 2.3 - 0311
Type
 
Power
Power
Ground
Description
 
Supply Voltage 3.3V
Supply Voltage 1.2V
 
See External Circuit Diagrams
Input
Main Oscillator Input 12MHz
Output Main Oscillator Output
Input
PLLA Filter
 
Output Driven to 0. Do not drive over 1.2V
Input
0 to1.2V
 
I/O
Reset Active Low
 
I/O
Data Bus
Output Address Bus
 
SDRAM makes data output go Hi-Z / blocks
Output
data input
SDRAM makes data output go Hi-Z / blocks
Output
data input
Type
Description
Output BS0 - SDRAM Bank Select
Output BS1 - SDRAM Bank Select
System Clock Active on positive going edge
Output
to sample all inputs
Active High Clock Enable freezes clock from
Output
the next operation
Active Low Enables Write operation and Row
Output
precharges
Output Active Low Row Address Strobe
Output Active Low Column Address Strobe
Output Row and Column addresses
Output SDRAM Controller chip select
See External Circuit Diagrams
An. Input Connect to Analog 3.3V
An. Input Touch panel YAn. Input Touch panel XAn. Input Touch panel Y+
An. Input Touch panel X+
An. Input A2D or GPIO
AGB75LC04
Datasheet 2.3 - 0311
LCD Signals
Pixel Data 0 - 23
Output
Pixel Clock / DCLK
Output
Frame Clock
Output
Hsync
 
Output
LP
Output
Vsync
Output
FO
Output
DISP
Output
OE
Output
Program Mode
Input
SPI
Pin Name
SPI SCLK
SPI MISO
SPI MOSI
SPI CS1
SPI CS2
SPI CS3
SPI Flash CS
TWI
SDA
SCL
UARTs
CommU TXD
CommU RXD
ProgU TXD
ProgURXD
UART2 TXD
UART2 RXD
UART2_SCK
Type
Output
Input
Output
Output
Output
Output
I/O
I/O
I/O
Output
Input
Output
Input
Output
Input
Output
 
LCD Pixel Data
LCD Drive Signal. LCD crystal polarization
clock.
Clock Pulse. Users can specify the whether
to clock on rising or falling edge.
Hsync Signal . This output goes active for
one clock period after all the serial data for
the current line has been shifted to the TFT
LCD.
Line Pulse Signal. This output goes active
after all the serial data for the current line
has been shifted to the STN LCD
Vsync Signal. TFT LCD First frame
synchronization.
Frame Out Signal. STN LCD first frame
synchronization
Display Control Signal. LCD power ( 1 = ON,
0 = OFF )
Output Enable
System Power Up Mode ( 1 = Program, 0 =
Normal )
See External Circuit Diagrams
Description
SPI Clock
SPI Data In
SPI Data Out
SPI Chip Select
SPI Chip Select
SPI Chip Select
SPI Data Flash Chip Select
 
Serial Data
Serial Clock
 
Asynchronous Serial-Data Output
Asynchronous Serial-Data Input
Asynchronous Serial-Data Output
Asynchronous Serial-Data Input
Asynchronous Serial-Data Output
Asynchronous Serial-Data Input
Serial Clock
UART2 RTS
UART2 CTS
USB
USB DDM
USB DDP
VBUS
GPIO
GPIOn
Programmable Timers
PWM0
PWM1
PWM2
Reserved
RSVD
N/C
Output
Input
Analog
Analog
Input
I/O
Output
Output
Output
 
Request To Send
Clear To Send
See External Circuit Diagrams
USB Device Port Data USB Device Port Data+
Vbus Monitor for host detection
 
Has a 100K programmable pull-up
 
Programmable Clock 0
Programmable Clock 1
Programmable Clock 2
 
Reserved Test Pins
No Connection
Pin Name
Type
Description
Touch Panel
TPCal
Input
Touch Panel Calibration (0=Normal, 1=Calibrate)
AGB75LC04
Datasheet 2.3 - 0311
AGB75LC04
Datasheet 2.3 - 0311
3.4 Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
208-pin PQPF Package Pinout
Name
VCC 3.3V + pullup
VCC 3.3V + pullup
DATA31
N/C
DATA30
VCC 3.3V + pullup
DATA29
RSVD
DATA28
GND
DATA27
VCC 3.3V
DATA26
Reset
DATA25
N/C
DATA24
CommU RXD
Pixel Data 8
CommU TXD
Pixel Data 9
VCORE 1.2V
Pixel Data 10
GND
Pixel Data 11
Program Mode
TPCal
ADDR6
ADDR7
VCC 3.3V
ADDR8
ADDR9
N/C
ADDR11
ADDR12
VCORE 1.2V
GND
GND
SDRAM CAS
N/C
SDRAM RAS
SDRAM BS 0
ADDR10
VCC 3.3V
SDRAM BS1
Pin
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
Name
LP / Hsync
FO / Vsync
VCC 3.3V
GND
DISP
TWI SDA*
TWI SCLK*
N/C
PWM0
PWM1
FC / OE
N/C
GND
GND
PWM2
VCC 3.3V
Pixel Data 12
Pixel Data 0
Pixel Data 13
Pixel Data 1
Pixel Data 14
Pixel Data 2
Pixel Data 15
VCORE 1.2V
VCC 3.3V
Pixel Data 3
GND
Pixel Data 4
Pixel Data 5
Pixel Data 6
Pixel Data 7
VBUS
SDRAM DQM3
ProgU TXD
Pixel Data 16
GND
Pixel Data 17
ProgU RXD
Pixel Data 18
SPI MISO
Pixel Data 19
VCC 3.3V
N/C
VCORE 1.2V
GPIO2*
Pin
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
Name
ADDR5
GND
VCC 3.3V
ADDR4
ADDR3
VCORE 1.2V
UART2 RXD
ADDR2
UART2 TXD
GND
N/C
ADDR1
SDRAM CLK EN
ADDR0
SDRAM WE
VCC 3.3V
SDRAM CLK
SDRAM DQM2
Pixel Data 20
GND
SDRAM DQM0
DATA15
DATA14
DATA13
DATA12
DATA11
DATA10
DATA9
DATA8
DATA7
GND
DATA6
VCC 3.3V
DATA5
Pixel Data 21
GND
Pixel Data 22
Pixel Data 23
UART2 SCK
VCORE 1.2V
UART2 RTS
GND
UART2 CTS
USB DDM
USB DDP
Pin
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
Name
VCORE 1.2V
GND
N/C
GND
VCORE 1.2V
Shut Down Control
Wake-Up Control
N/C
RSVD
GND
A2D Ref
Touch YTouch XTouch Y+
Touch X+
A2D4 / GPIO4*
VCC 3.3V
GND
GND
DATA23
VCC 3.3V
DATA22
GND
DATA21
SDRAM CS
DATA20
VCORE 1.2V
DATA19
DATA18
DATA17
DATA16
N/C
N/C
SPI CS3
SPI CS2
SPI CS1
GND
VCORE 1.2V
GND
SDRAM DQM1
N/C
VCC 3.3V
VCORE 1.2V
GND
GND
Pin
46
47
48
49
50
51
52
Name
N/C
N/C
N/C
N/C
GND
N/C
Pixel Clock
Pin
98
99
100
101
102
103
104
Name
SPI MOSI
SPI SCLK
GND
SPI Flash CS
N/C
N/C
VCC 3.3V
Pin
150
151
152
153
154
155
156
Name
GPIO3*
VCC 3.3V
DATA4
DATA3
DATA2
DATA1
DATA0
Pin
202
203
204
205
206
207
208
Name
Main OSC XIN
Main OSC XOUT
VCORE 1.2V
VCC 3.3V
GND
PLLA Filter Input
GND
Pin
M7
M8
M9
M10
M11
M12
M13
M14
M15
N1
N2
N3
N4
N5
N6
N7
N8
N9
N10
N11
N12
N13
N14
N15
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
Name
DATA22
A2D7 / GPIO44*
N/C
GPIO30
GND
N/C
VCC 3.3V + pullup
DATA28
N/C
GPIO21
GPIO24
VCORE 1.2V
N/C
Touch X+
VCC 3.3V
DATA20
SPI CS3
GPIO27
N/C
PLLA Filter Input
Main OSC XIN
VCC 3.3.V
DATA29
Reset
DATA4
DATA3
Shut Down Control
RSVD
Touch YA2D5 / GPIO42
DATA21
DATA16
SPI CS1
GPIO28
*NOTE: Multi-function Pin. See Multiplex I/O Section for more information.
3.5 Pin
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
C1
C2
C3
C4
225-pin BGA Package Pinout
Name
GPIO4
SPI SCLK
SPI MOSI
N/C
Pixel Data 17
VBUS
Pixel Data 5
Pixel Data 15
Pixel Data 12
N/C
N/C
GPIO12
DISP
GPIO36
N/C
ADDR4
GPIO15
GPIO14
GPIO2
ProgU TXD
Pixel Data 16
Pixel Data 7
Pixel Data 3
Pixel Data 14
PWM2
PWM0
TWI SDA
GPIO9
GPIO34
N/C
GPIO18
N/C
GPIO16
GPIO39
AGB75LC04
Datasheet 2.3 - 0311
Pin
D13
D14
D15
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
E13
E14
E15
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
G1
Name
LP / Hsync
GPIO35
GPIO6
ADDR1
ADDR2
GPIO40*
UART2 TXD
VCC 3.3V
SPI Flash CS
N/C
Pixel Data 1
Pixel Data 0
TWI SCLK
GPIO11
Pixel Clock
GPIO7
N/C
ADDR10
SDRAM WE
ADDR0
UART2 RXD
SDRAM CLK EN
GPIO19
SDRAM DQM0
VCC 3.3V
Pixel Data 18
VCC 3.3V
N/C
GPIO8
GPIO5
ADDR12
SDRAM BS0
N/C
Pixel Data 20
Pin
H10
H11
H12
H13
H14
H15
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
J11
J12
J13
J14
J15
K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
K13
Name
VCORE 1.2V
DATA5
TPCal
Program Mode
ADDR7
ADDR8
DATA7
DATA6
Pixel Data 23
DATA8
USB DDP
DATA2
GND
GND
GND
N/C
Pixel Data 9
CommU RXD
CommU TXD
Pixel Data 11
ADDR6
Pixel Data 21
Pixel Data 22
GPIO3
UART2 CTS
GPIO22
Wake-Up Control
VCC 3.3V
VCORE 1.2V
VCC 3.3V
Main OSC XOUT
DATA25
VCC 3.3V + pullup
DATA24
AGB75LC04
Datasheet 2.3 - 0311
Pin
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
Name
SPI MISO
Pixel Data 19
ProgU RXD
Pixel Data 4
Pixel Data 13
FC/ OE
GPIO10
GPIO38
N/C
N/C
SDRAM BS 1
GPIO20
ADDR3
ADDR5
N/C
GPIO17
GPIO13
SDRAM DQM3
Pixel Data 6
Pixel Data 2
PWM1
GPIO37
FO / Vsync
Pin
G2
G3
G4
G5
G6
G7
G8
G9
G10
G11
G12
G13
G14
G15
H1
H2
H3
H4
H5
H6
H7
H8
H9
Name
SDRAM CLK
SDRAM DQM2
DATA14
DATA15
VCORE 1.2V
GND
GND
GND
VCC 3.3V
SDRAM RAS
N/C*
ADDR9
SDRAM CAS
ADDR11
DATA10
DATA9
DATA13
DATA11
DATA12
VCC 3.3V
GND
GND
GND
Pin
K14
K15
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
L15
M1
M2
M3
M4
M5
M6
Name
Pixel Data 8
Pixel Data 10
UART2 SCK
UART2 RTS
DATA1
GPIO25
VCORE 1.2V
GNDBU
A2D4 / GPIO4*
SDRAM CS
DATA17
GND
DATA31
VCC 3.3V + pullup
GPIO33
DATA30
DATA18
USB DDM
GPIO23
DATA0
GND
GND
Touch X-
Pin
P11
P12
P13
P14
P15
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
Name
GND
SDRAM DQM1
VCORE 1.2V
RSVD
DATA27
N/C
A2D Ref
Touch Y+
A2D6 / GPIO43*
GND
DATA23
DATA19
N/C
SPI CS2
GPIO26
GPIO29
GPIO31
GPIO32
VCORE 1.2V
DATA26
*NOTE: Multi-function Pin. See Multiplex I/O Section for more information.
3.6
Multiplex I/O
The pins shown in the following tables have multiple function per pin. The tables describe the
peripheral function, general purpose input and general purpose output.
4 Function Pins:
Pin
Function A
Function B
58 / B12
59 / E10
TWI_SDA
TWI_SCLK
UART2 RXD
UART2 TXD
3 Function Pins:
Pin
208 PQFP
172
225 BGA
N5
L7
P6
R4
M8
General Purpose
Input
Yes (GPIO0)
Yes (GPIO1)
General Purpose
Output
Yes (GPIO0)
Yes (GPIO1)
Function A
General Purpose Input
General Purpose
A2D (A2D4)
Yes (GPIO4)
Yes (GPIO4)
A2D (A2D3)
A2D (A2D4)
A2D (A2D5)
A2D (A2D6)
A2D (A2D7)
Yes (GPIO3)
Yes (GPIO4)
Yes (GPIO42)
Yes (GPIO43)
Yes (GPIO 44)
Yes (GPIO3)
Yes (GPIO4)
Yes (GPIO42)
Yes (GPIO43)
Yes (GPIO44)
2 Function Pins:
Pin
208 PQFP
97
150
225 BGA
B4
K3
F12
D15
E13
F11
B13
C11
E11
A12
D6
B3
B2
C3
D5
C1
F5
D1
N1
K5
M2
N2
L4
R10
N9
P10
R11
M10
R12
R13
L13
B14
D14
A14
D11
C12
C4
E3
A1
AGB75LC04
Datasheet 2.3 - 0311
General Purpose Input
General Purpose Output
Yes (GPIO2)
Yes (GPIO3)
Yes (GPIO2)
Yes (GPIO3)
Yes (GPIO2)
Yes (GPIO3)
Yes (GPIO5)
Yes (GPIO6)
Yes (GPIO7)
Yes (GPIO8)
Yes (GPIO9)
Yes (GPIO10)
Yes (GPIO11)
Yes (GPIO12)
Yes (GPIO13)
Yes (GPIO14)
Yes (GPIO15)
Yes (GPIO16)
Yes (GPIO17)
Yes (GPIO18)
Yes (GPIO19)
Yes (GPIO20)
Yes (GPIO21)
Yes (GPIO22)
Yes (GPIO23)
Yes (GPIO24)
Yes (GPIO25)
Yes (GPIO26)
Yes (GPIO27)
Yes (GPIO28)
Yes (GPIO29)
Yes (GPIO30)
Yes (GPIO31)
Yes (GPIO32)
Yes (GPIO33)
Yes (GPIO34)
Yes (GPIO35)
Yes (GPIO36)
Yes (GPIO37)
Yes (GPIO38)
Yes (GPIO39)
Yes (GPIO40)
Yes (GPIO41)
Yes (GPIO2)
Yes (GPIO3)
Yes (GPIO5)
Yes (GPIO6)
Yes (GPIO7)
Yes (GPIO8)
Yes (GPIO9)
Yes (GPIO10)
Yes (GPIO11)
Yes (GPIO12)
Yes (GPIO13)
Yes (GPIO14)
Yes (GPIO15)
Yes (GPIO16)
Yes (GPIO17)
Yes (GPIO18)
Yes (GPIO19)
Yes (GPIO20)
Yes (GPIO21)
Yes (GPIO22)
Yes (GPIO23)
Yes (GPIO24)
Yes (GPIO25)
Yes (GPIO26)
Yes (GPIO27)
Yes (GPIO28)
Yes (GPIO29)
Yes (GPIO30)
Yes (GPIO31)
Yes (GPIO32)
Yes (GPIO33)
Yes (GPIO34)
Yes (GPIO35)
Yes (GPIO36)
Yes (GPIO37)
Yes (GPIO38)
Yes (GPIO39)
Yes (GPIO40)
Yes (GPIO41)
AGB75LC04
Datasheet 2.3 - 0311
4
Block Diagram
ARM7TDMI
ADDR0 - ADDR12
DATA0 - DATA31
Amulet OS
SDRAM CLK
SDRAM
Controller
Fast SRAM
160K
SDRAM CLK EN
SDRAM WE
SDRAM RAS
SDRAM CAS
SDRAM CS
DQM0 - DQM3
Main OSC XIN
Main OSC XOUT
Program Mode
T CAL
System
Controller
Multi- Layer
AHB Matrix
BS0, BS1
Pixel Data 0-7 (Red)
V Core
Pixel Data 8-15 (Green)
/RESET
LCD
Interface
SPI SCLK
SPI CS0 - CS3
MISO
Prog U RXD
Comm U TXD
Comm U RXD
USB DDM
USB DDP
Pixel CLK
V Sync / FO
H Sync / LP
SPI
OE / FC
DISP
MOSI
Prog U TXD
Pixel Data 16-23 (Blue)
Programming
UART
Communication
UART
USB
Peripheral
Bridge
Peripheral
DMA
Controller
Touch
Panel
A2D
TWI
GPIO
UART
2
TP A2D Ref
A2D Touch 0 - 4
SCL
SDA
GPIO
UAR T2 TXD
UAR T2 RXD
UAR T2 RTS
UAR T2 CTS
UAR T2 SCK
5
Connection Diagrams
5.1
LCD Connections
5.11
TFT LCD Connection
24 BIT
Amulet
TFT LCD*
18 BIT
Amulet
TFT LCD*
Pixel Data 0-7
Pixel Data 8-15
R0-7
G0-7
Pixel Data 2-7
Pixel Data 10-15
R0-5
G0-5
Pixel Data 16-23
B0-7
Pixel Data 18-23
B0-5
VSYNC
VSYNC
VSYNC
VSYNC
HSYNC
HSYNC
HSYNC
HSYNC
Pixel Clock
DISP
DE
Pixel Clock
Pixel Clock
DISP
DE
*Note: These diagrams assume LSB is always 0. Some displays may vary
5.12
TFT UPS052 LCD Connection
Amulet
Amulet
Pixel Data 0-7
Pixel Data 0-7
Pixel Data 8-15
Pixel Data 8-15
Pixel Data 16-23
Pixel Data 16-23
VSYNC
VSYNC
HSYNC
HSYNC
Pixel Clock
Clock
Pixel
DISP
DISP
DE
DE
TFT LCD*
TFT LCD*
Data 0-7
Data 0-7
VSYNC
VSYNC
HSYNC
HSYNC
Pixel
Clock
Pixel
Clock
DISP
DISP
DEDE
*Note: These diagrams assume LSB is always 0. Some displays may vary
AGB75LC04
Datasheet 2.3 - 0311
DISP
DE
Pixel Clock
DISP
DE
AGB75LC04
Datasheet 2.3 - 0311
5.13
STN LCD Connection
Amulet
Amulet
PixelPixel
DataData
0-7 0-7
8-15
PixelPixel
DataData
8-15
Pixel
Data16-23
16-23
Pixel
Data
VSYNC
VSYNC
HSYNC
HSYNC
Pixel Clock
Pixel Clock
DISP
DISP
DE
DE
STN
LCD*
STN
LCD*
Data 0-7
Data 0-7
Frame
Frame
Out Out
Line Line
PulsePulse
Pixel Clock
Pixel Clock
DISP
DISPFrame Clock
Frame Clock
*Note: These diagrams assume LSB is always 0. Some displays may vary
5.2
Flash Connection
Amulet
Amulet
SPI Flash CS
SPI Flash CS
SPI MOSI
SPI MOSI
SPI SCLK
SPI SCLK
SPI MISO
SPI MISO
Flash
Flash
Chip Select
Chip Select
Serial Input
Serial Input
Serial Clock
Serial Clock
Serial Output
Serial Output
5.3
SDRAM Connection
5.31
32-bit Data SDRAM
32 BIT
Amulet
SDRAM
Data0 - Data31
Data0 - Data31
SDRAM DQM0 - DQM3
DQM0 - DQM3
ADDR0 - ADDR10
ADDR0 - ADDR10
SDRAM BS0 - BS1
Bank Address 0 -1
SDRAM CAS
CAS
SDRAM RAS
RAS
SDRAM WE
WE
SDRAM CS
Chip Select
SDRAM CLK EN
Clock Enable
Clock
SDRAM CLK
6
Pixel Data Connections for color depth support
6.1
TFT LCD Connection Table, 1 clock per pixel
LCD
Bit
Depth
Pixel Data Connection
Amulet
0
1
2
3
4
5
6
7
24
R0
R1
R2
R3
R4
R5
R6
R7
18
N/C N/C R0
R1
R2
R3
16
N/C N/C N/C R0
R1
15
N/C N/C N/C R0
R1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
G0 G1 G2 G3 G4 G5 G6 G7
B0
B1
B2
B3
B4
B5
B6
B7
R4
R5 N/C N/C G0 G1 G2 G3 G4 G5 N/C N/C B0
B1
B2
B3
B4
B5
R2
R3
R4 N/C N/C G0 G1 G2 G3 G4 G5 N/C N/C N/C B0
B1
B2
B3
B4
R2
R3
R4 N/C N/C N/C G0 G1 G2 G3 G4 N/C N/C N/C B0
B1
B2
B3
B4
Note: Amulet Pins 0, 8, and 16 are the least significant bits of the Red, Green, and Blue pixel data,
respectively
AGB75LC04
Datasheet 2.3 - 0311
AGB75LC04
Datasheet 2.3 - 0311
6.2
TFT UPS052 LCD Connection Table
Pixel Data Connection
LCD
Bit
Depth
6.3
Amulet
0
1
2
3
4
5
6
7
24
0
1
2
3
4
5
6
7
0
1
2
3
4
5
0
1
2
3
4
18
N/C N/C
15
N/C N/C N/C
STN LCD Connection Table
Pixel Data Connection
LCD
Bit
Depth
Amulet
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
4
0
1
2
3
N/C N/C N/C N/C
7
External Circuit Diagrams
7.1
4 Wire Touch Panel Filter+
Touch Panel
4
Touch X+
3
Touch Y+
2
Touch X-
1
Touch Y-
0.01uF
0.01uF
0.01uF
0.01uF
Touch Pane l Filter
7.2
Serial Data Flash
SI
SPI MOSI
2
SPI SCLK
3
RE SET
4
SPI CS
8
SO
7
SCK
GND
/RES ET
VCC
6
/WP
5
/CS
SPI MISO
3.3V
0.1uF
7.3
USB Interface
2
USB
DDM
3
27 ohm
330 Kohm
330 Kohm
Main OSC Interface
Main O SC XIN
VBUS
27 Kohm
27 ohm
USB
DD P
7.4
1
Main O SC XOU T
1Kohm
12 M H z
33pF
AGB75LC04
Datasheet 2.3 - 0311
33pF
4
47 Kohm
AGB75LC04
Datasheet 2.3 - 0311
7.5
PLLA Filter
PLL A Filter Input
1nF
300 ohm
0.1uF
7.6
Reset Circuit
Rese t
Pin 14
Rese t
3.3V
GND
3.3V
Swi tch
7.7
0.1uF
Mandatory Pullups
Vcc (Pin 1 )
Vcc (Pin 2)
Vcc (Pin 6)
Wak e Up Control
100kohm
100kohm
100kohm
100kohm
3.3V
3.3V
3.3V
1.2V
8
Environmental, Electrical and Power Specifications
AGB75LC04-XX-X: 208 pin: AGB75LC04-QU-E / 225 pin: AGB75LC04-BG-E
8.1
Recommended Operating Conditions
Power supply
Vcc
3.0V to 3.6V, 3.3V nominal
Power supply
Vcore
1.08V to 1.32V, 1.2V nominal
8.2
Environmental Specifications
Operating
temperature
Storage
temperature
8.3
-40 to +85°C
- 60°C to +150°C
DC Characteristics
Vcore Supply
current
VDDIO Supply
current
VL Input Low
Level Voltage
VH Input High
Level Voltage
Rpullup Pull Up
Resistance
IO Output
Current
ISC Static
Current
22mA @ 1.2V
TBD
-0.3V to 0.8V
2V to (VCC + 0.3V)
70 kOhm to 175 kOhm, 100 kOhm nominal
8mA
Vcore = 1.2V, excluding Power on
Reset
All inputs driven, NRST=1
Vcore = 1.2V, logic cells
consumption, including Power on
Reset
All inputs driven, WKUP=0
T = 25oC
600uA
T = 25oC
30uA
*The DC characteristics above are applicable to the operating temperature range: TA = -40oC to 85oC,
unless otherwise specified and are certified for a junction temperature up to TJ = 100oC. The values
are estimated values with operating conditions as follows:
• VDDIO = VDDPLLA = VAVDD = 3.3V
• VDDCORE = VDDBU = VDDOSC = VDDOSC32 = 1.2V
• TA = 25oC
• There is no consumption on the I/Os of the device
AGB75LC04
Datasheet 2.3 - 0311
AGB75LC04
Datasheet 2.3 - 0311
8.4
SDRAM
8.41 Capacitance Load on Data, Control and Address Lines
3.3V
50pF
1.8V
30pF
8.42
3.3V
1.8V
8.5
Capacitance Load on SDCK Pad
10pF
10pF
RoHS compliant Package Options
208-PQFP
28x28x3.4mm, 0.5 mm pin pitch
225-ball LFBGA 13x13x1.4mm, 0.8 mm ball pitch
8.6
Power Consumption
The advanced power management controller has a very slow clock operating mode and software
programmable power optimization capabilities. Along with a reset controller and shutdown controller,
this gives the AGB75LC04-XX-X several low-power options.
.
9
Timing Specifications
9.1 LCD
The following tables and figures show basic information on interfacing with the LCD controller. For
more detailed information on how to configure the LCD controller, please refer to the HTML Compiler
Help files.
9.11
TFT
Item
Hsync Pulse Width
Hsync Back Porch
Hsync Period
Hsync Display Data
Hsync Front Porch
Vsync Pulse Width
Vsync Back Porch
Vsync Period
Vsync Display Data
Vsync Front Porch
Symbol
Thpw
Thbp
Thp
Thd
Thfp
Tvpw
Tvbp
Tvp
Tvd
Tvfp
Unit
Pixel Clock
Pixel Clock
Pixel Clock
Pixel Clock
Pixel Clock
Hsync
Hsync
Hsync
Hsync
Hsync
Pixel Clock
Hsync
Thpw
Thp
Thbp
Thfp
Data
Thd
Output Enable
Hsync
Vsync
Tvpw
Tvp
Tvbp
Tvfp
Lines of Data
Tvd
Item
Pixel Data
9.12
Setup Time
Hold Time
Typical
Unit
0.75 * Pixel Clock Period
0.25 * Pixel Clock Period
ns
ns
STN
Item
Line Pulse Width
Line Pulse Porch
Frame Frequency
AGB75LC04
Datasheet 2.3 - 0311
Symbol
Thpw
Thbp
Thp
Unit
System Clock
System Clock
80MHz Clock
AGB75LC04
Datasheet 2.3 - 0311
Pixel Clock
Data
Line Pulse
Frame Out
Frame Clock
9.121 STN Monochrome and Grayscale
Item
Setup Time
Pixel Data
Hold Time
Typical
0.75 * Pixel Clock Period
0.25 * Pixel Clock Period
Unit
ns
ns
Typical
0.5 * Pixel Clock Period
0.5 * Pixel Clock Period
Unit
ns
ns
9.122 STN Color
Item
Setup Time
Pixel Data
Hold Time
9.2
SPI
Item
MISO
Min
Setup Time before SPI
SCLK rises
Hold Time after SPI
SCLK rises
Setup Time before SPI
SCLK falls
Hold Time after SPI
SCLK falls
Max
Unit
3.66
ns
0
ns
3.52
ns
0
ns
SPI SCLK rising to MOSI Valid
-0.6
SPI SCLK rising to MOSI change
-0.81
ns
SPI SCLK falling to MOSI Valid
-0.19
SPI SCLK falling to MOSI change
ns
-0.67
ns
ns
NOTE: Load Capacitance is 8pF for MISO and 6pF for SPI SCLK and MOSI
9.3 TWI
Item
Setup Time
Serial Data
Hold Time
9.4
Typical
TBD
TBD
Unit
ns
ns
SDRAM
SDRAM CLK
Control/Address
tCA DO setu p
tCA DO ho ld
Data In
tD Isetu p
tD Iho ld
Data Out
tCA DO setu p
Item
Setup
Control/Address/Data Time
Out1
Hold
Time
Setup
Time
Data Input
Hold
Time
AGB75LC04
Datasheet 2.3 - 0311
tCA DO ho ld
Symbol
Typical
Unit
tCADOsetup
5.51
ns
tCADOhold
5.95
ns
tDIsetup
0.6
ns
tDIhold
0.62
ns
AGB75LC04
Datasheet 2.3 - 0311
9.41
SDRAM PC100 Characteristics (3.3V Supply, CL=2)
Item
Min
SDRAM Frequency
Control/Address/Data in Setup
1
Control/Address/Data in Hold1
Data Out Access Time after
SDRAM CLK rising
Data Out Change Time after
SDRAM CLK rising
9.42
Unit
100
MHz
2
ns
1
6
3
ns
ns
SDRAM PC133 Characteristics (3.3V Supply, CL=3)
Item
Min
SDRAM Frequency
Control/Address/Data in Setup
Control/Address/Data in Hold
1
1
Max
Unit
133
MHz
1.5
ns
0.8
Data Out Access Time after
SDRAM CLK rising
5.4
Data Out Change Time after
SDRAM CLK rising
9.5
Max
3.0
ns
ns
USB
Item
Transition Rise Time
Transition Fall Time2
Rise/Fall Time Matching2
2
Min
Max
Unit
4
4
90
20
20
111.11
ns
ns
%
NOTE:
1. Control/Address is the set of the following timings: ADDR0-ADDR12, SDRAM10, SDRAM CAS, SDRAM RAS,
SDRAM CLK, SDRAM CLK EN, BSx, DOMx and SDRAM WE.
2. In Full Speed wit Load Capacitance of 50pF.
10
Display Data Pattern
11
System Parameters
Up to 800xRGBx600 resolution.
Active and Passive display support
USB, UART, TWI and SPI
39 pins on the LFBGA and up to 5 pins
on the PQFP package
4- or 5-wire, calibration, noise filtering,
gesture recognition
32-bit parallel interface
4Mbit to 64Mbit serial data flash
LCDs supported
Interfaces supported
Number of GPIO
Integrated Touch panel Decoder
SDRAM
Flash
12
Revision History
Date
Revision
Notes
12 February 2009
7 May 2009
2.0
2.1
First complete datasheet
Rename SDRAM Blank Select to BSx
Added BGA Information
Added Packaging Information.
AGB75LC04
Datasheet 2.3 - 0311
AGB75LC04
Datasheet 2.3 - 0311
13
Ordering Information
Ordering Code
Package
Package Type
STK-480272C
208 PQFP
RoHS Compliant
AGB75LC04-QU-E
208 PQFP
RoHS Compliant
AGB75LC04-BG-E
225 BGA
RoHS Compliant
Temperature
Operating Range
-20oC to 60oC
Industrial
-40oC to 85oC
Industrial
-40oC to 85oC
Tel (408) 374-4956
Fax (408) 374-4941
http://www.AmuletTechnologies.com
Sales@AmuletTechnologies.com
Support@AmuletTechnologies.com
1475 S. Bascom Ave., Suite 111
Campbell, CA 95008 USA
Disclaimer: The information in this document is provided in connection
with Amulet Technologies, LLC (Amulet) products. No license, express or
implied, to any intellectual property right is granted by this document or in
connection with the sale of Amulet products. EXCEPT AS SET FORTH IN
AMULET’S TERMS AND CONDITIONS OF SALE WHERE AMULET IS
THE SELLER, AMULET ASSUMES NO LIABILITY WHATSOEVER AND
DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO
EVENT SHALL AMULET BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION)
ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT,
EVEN IF AMULET HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. Amulet makes no representations or warranties
with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and
product descriptions at any time without notice. Amulet does not make
any commitment to update the information contained herein. Unless
specifically provided otherwise, Amulet products are not approved for use
in automotive applications, medical applications (including, but not limited
to, life support systems and other medical equipment), avionics, nuclear
applications, or other high-risk applications (e.g., applications that, if they
fail, can be reasonably expected to result in significant personal injury or
death).