1249 $1450 - United Tools Albany

CLEAN UP ON CORDLESS
$
ONLY
649
$
12 Month
Warranty
CHOOSE 1 OF THE FOLLOWING BONUSES:
• 100mm ANGLE GRINDER (DW800-XE)
• 18V BARE RIGHT ANGLE DRILL (DW960P-XE)
• 90 PCE ACCESSORY SET (DT9296-XE)
ONLY
699
12 Month
Warranty
18V LXT Cordless Driver Drill
BHP451RFE
• Mode selection system - quickly shift from
“drill” to “driver” to “hammer drill” for increased efficiency
• 13mm Metal single sleeve ratcheting chuck - fast,
one-handed operation and unmatched bit grip
• All metal 3-speed transmission produces
25% faster working speed for more performance
• Two built-in L.E.D. lights for more illuminated accurate work
• Compact design - 250mm long and weighs only 2.2kg
18x2 Lithium
Ion Compact
Drill / Driver
229
V28H
• Powerful Milwaukee 28V motor
• L-shape construction for perfect balance
and control
• 3 mode with Roto stop for chiselling
• 3.2 Joules of blow energy
• 2 x 3.0Ah Lithium ion batteries
• Tri mode charger
• Supplied in contractor bag
• 22 position adjustable
torque setting
• 13mm single sleeve chuck
• Push button type forward
/reverse switch
• Slip resistant handle
• 2 x 2.0Ah NiCd batteries
• 1 hour charger
$
ONLY
549
$
12 Month
Warranty
DV18DL(HL)
18 Volt Li Ion
Cordless Impact Driver Drill
• Li-Ion battery technology, lightweight, long
life and compatible • 64Nm of torque
• Over charge & over discharge battery
protection • 13mm single sleeve chuck with
automatic spindle lock • Lightweight – 2.2kg
• Built in shock absorbing feature
• 22 stage torque adjustment
ONLY
278
THE LOT
615
12 Month
Warranty
18V Impact
Driver Li-Ion
WH18DL (HD)
• Over charge, over
discharge & over current protection
• Air Cooled Charger guarantees longest
possible battery life
• Built in shock absorbing feature
• Complete with 2 x 3ah Li-Ion Batteries and Air
Cooled Charger in Carry Case
• Charge time of only 45 minutes
$
ONLY
BY REDEMPTION, WITH PURCHASE
625
ONLY
629
3 Year Limited
Warranty
COND. APPLY
18 Volt ‘XRP’ Cordless
Hammer Drill Driver DC925KC-XE
• VSR 0-450/0-1,500/00/2,000 RPM
• 0-7650/0-25, 500/0-34,000 BPM
• 13mm self tightening keyless chuck
• Includes 3 x 18V batteries
• 12.7mm Square Drive
• Powerful 220Nm of torque • Lightweight – 1.6kg
• Convenient belt hook with LED light
• Same torque even at reverse rotation
• Fully compatible with all existing 18 volt
Hitachi batteries
• Charge time of approx 45 minutes
• Fan cooled charging
ONLY
12 Month
Warranty
14.4 Volt Li Ion
Impact Driver EY7540LN2S
• Longer life by brushless motor & electric
switch • 3 speed (high/medium/low)
• High capacity 3.0Ah battery • Variable speed
control/reversible • 50min charging system
• Compact body (158mm) • Light weight
(1.45kg) • High power 150Nm
• LED light for support • Belt hook
• Electric brake • Extra battery pack included
8
$
$
310
ONLY
549
3 Year Limited
Warranty
No Battery
COND. APPLY
V28AG-SKIN
• V28 Technology – for Maximum Power
• Soft Start • V
28AG is the problem solver
for all Short Cutting or Grinder Applications
• Over Load protection
• Battery Lock Out function – added Safety
• No batteries or charger supplied
• Carry Case
BONUS
$
115mm 18 Volt
Cordless Heavy Duty
Finishing Grinder DC410KAXE
• 115mm (41/2”), 7500RPM, 2 x 18V batteries,
charger, kitbox
ONLY
549
BONUS
ONLY
1249
3 Year Warr
Conditions apply
18 Volt Lithium Ion Cordless Combination Kit SBZR4
• SBZ 18 Impulse Li Drill / Driver
• ASE 18 Li Sabre Saw
• BHA 18 Li Hammer with Anti-Vibration side handle
• MLA 18 Li Torch with spare globe
• 3 x 2.2. Ah Li-Ion batteries and AC 30 Plus Charger
18 Volt Lithium
Ion Cordless Power Pack
V18PPB - Redline
• V18PD Hammer Drill • V18SX Sawzall • V18CS Circ Saw
• V18 Torch • 2 x 3.0Ah Lithium ion Batteries
$
ONLY
1450
BONUS AccesSories valued at $300
• Milwaukee Jobsite Armour Gloves • 50 Pocket Bucketless Organiser • Heavy Duty
Right Angle Attachment • 25mm Selfeed Bit • 12pce Ultimate Sawzall Blade Pack
FOR EACH OF THESE DEWALT KITS CHOOSE ONE OF THE FOLLOWING BONUS ITEMS (BY REDEMPTION)
• 100mm ANGLE GRINDER (DW800-XE) • 18V BARE RIGHT ANGLE DRILL (DW960P-XE) • 90 PCE ACCESSORY SET (DT9296-XE)
$
ONLY
2149
3 Year Limited
Warranty
55 PCE BIT SET
COND. APPLY
3 Year Warr.
Cond Apply
549
ONLY
BONUS
ANGLE ATTACHMENT,
CHUCK & BIT SET
POWERMAXX LI
• Compact, lightweight cordless
drill driver
• Fastest screwdriver drill in its
class making it ideal for assembly,
disassembly, maintenance, metal and
timber drilling • 2.2 Ah Lithium Ion battery
which means you can drill for longer
• 2-speed metal gearbox
• New stronger air cooled motor
$
$
$
3RD BATTERY
& SPORTS BAG
7.2 Volt Li Ion
Cordless Driver
18 Volt Li Ion
Cordless Impact
Wrench WR18DL (HD)
115mm 28 Volt
Lithium Ion
Cordless Grinder
ONLY
299
3 Year Warr.
Cond Apply
12 Month
Warranty
$
Includes:
LANTERN UB12DL
2 x Batteries
& Case
ONLY
549
$
$
28 Volt Lithium
Ion Cordless SDS $ ONLY
+ Rotary Hammer 1056
12 Volt Drill
Driver DS12DM(L)
GSR 18x2
• 36 Volt Lithium Ion
technology
• 80Nm max torque
• 2 speed
• VSR • Dura shield housing
• 2 x 1.3Ah batteries
• 45 minute fan cooled
charger in case
• 15+1 torque settings
• Weight of 14.4V 2.5kg
• Includes batteries
ONLY
Also available
$
Impact model
12 Month
GSB18x2 $599
Warranty
GSR 10.8 V
• The full power of a standard
screwdriver at just 50%
of the size
• Handy tool for joiners,
maintenance and renovation experts,
electricians and plumbers
• Full power of the battery right to
ONLY
the end, no memory effect or self
discharge, short charge time
$
• Includes 2 x 1.3Ah batteries,
12 Month
30 min charger and holster
Warranty
• 18Nm of torque
BY REDEMPTION, WITH PURCHASE
18V LXT Cordless Hammer Drill
BDF451RFE
• Mode selection system - quickly shift from “drill”
to “driver” for increased efficiency
• 1 3mm Metal single sleeve ratcheting chuck - fast,
one-handed operation and unmatched bit grip
• All metal 3-speed transmission produces 25% faster working
speed for more performance
• Two built-in L.E.D. lights for more illuminated accurate work
• Compact design - 238mm long and weighs only 2.1kg
10.8 Volt Li Ion
Cordless Screwdriver
CHOOSE 1 OF THE FOLLOWING BONUSES:
• 100mm ANGLE GRINDER (DW800-XE)
• 18V BARE RIGHT ANGLE DRILL (DW960P-XE)
• 90 PCE ACCESSORY SET (DT9296-XE)
CAN ALSO BE PURCHASED
WITH BATTERY
ONLY
599
12 Month
Warranty
14.4 Volt Li Ion
Impact Driver EY7542LN2S
• Multi function Impact Driver with drill driver
mode • 140 Nm in Impact Mode for Heavy Duty
Fastening • High Capacity 3.0Ah Li ion Battery
packs • Drill Driver mode with 21 stage Clutch
• Belt Hook & LED Light as standard
• Extra battery as standard equipment
• LED Light & Belt hook
• Extra battery pack included
$
ONLY
999
12 Month
Warranty
28.8 Volt Li Ion
Rotary Hammer EY7880LN2T
• Dual Function – Rotary Hammer or Drill
• Two speed hammering selection
• High Capacity 3.0Ah Li ion Battery packs
• Slow start switch for accurate drilling
• Ergonomic soft rubber grip
• LED Light • Dust proof switch
• Extra battery pack included
18 Volt Li Ion
Cordless Impact
Drill Driver
SBZ18
• Versatile 5 torque
settings
• Impact function for drilling concrete
• Impulse function for removing damaged
screws • 2 speed gearbox
• Easy rubber coated switch
• Quick 13mm keyless chuck • Weight 2.2kg
WE ARE LOCALLY OWNED & OPERATED B U S I NE S S E S
$
ONLY
1129
3 Year Limited
Warranty
18 Volt Cordless
Heavy Duty Combo Pack DC4MEGAXE
COND. APPLY
• Ideal for plumbers and electrical applications. Includes:
• 18V Hammer drill/drill driver (DC925) • 18V Rotary hammer
drill (DC212) • 18V Reciprocating saw (DC385)
• 18V Flexible floodlight (DC919) • 2 x 18V Batteries (DC9096)
• 18V Charger (DC9116) • 1 x Contractors bag
$
18 Volt Cordless ‘XRP’
Combination Kit DC6PAKIA-XE
ONLY
1699
3 Year Limited
Warranty
COND. APPLY
• Ideal for plumbing and electrical applications. Includes:
• Hammer/Drill/Driver (DC925) • Circular Saw (DC390)
• Reciprocating Saw (DC385) • Finishing Grinder (DC410)
• Impact Driver (DW056) • Floodlight (DW919)
• 2 x 2.4 Ah XRP Pack Batteries and Large Contractors
Bag (DCBAG6FC) • 18V Charger (DC9116)
A ND T O TA L LY C O M M I T T ED T O O U R C U S T O M E RS
18V ‘XRP3’ Combination Kit DC9KTGA-XE
• Includes: • 18V Hammer drill /drill driver (DC925)
• 18V Circular saw (DC390) • 18V Jig Saw (DC330)
• 18V Reciprocating saw (DC385) • 18V Finishing Grinder (DC410)
• 18V Impact wrench (DW059) • 18V Impact driver (DW056)
• 18V Cut out Tool (DC550P) • 18V Flexible floodlight (DC919)
• 2 x 18V Batteries (DC9096) • 18V Charger (DC9116)
• 2 x Contractors bags
9
BACK INTO WOODWORK
434-S6-EUR
NEW T7 Watercooled
Sharpening System
for Professionals
6pce Chisel Set in
Wooden Storage Box
• Sizes: 6,10,12, 18, 25 & 32mm
• Each chisel is equipped with split
proof handle which easily absorbs
repeated hammer blows
• Two component ergonomic
non-slip grip
handles
ONLY
$
7yr
warranty
! Square Edge Jig,
NEW Stone Grader &
Truing and Dressing Tool
S!Angle Master,
PLUHoning
Compound,
Handbook & DVD
$50 CASHBACK
Optional accessories shown BY REDEMPTION
on www.tormek.com
For professional results accessories
to suit all edge tools.
159
$25 CASHBACK
BY REDEMPTION
$
ONLY
1049
7 Year
Warranty
$
Woodturner’s Kit TNT-708
• This kit contains everything you need to shape and sharpen
all your turning tools • Includes SDV-185, SDS-50, SVD-110,
LA-120, MH-380, TNT-300, TTS-100
Water Cooled
Sharpening System
for Craftsmen 1206
$25 CASHBACK
BY REDEMPTION
Hand Tool Kit
HTK-705
• This kit contains the jigs for sharpening your
knives, scissors, draw knives and axes as well
as short chisel and carving tools • Includes
SVM-45, SVM-100, SVX-150, SVA-170, SVS-32
$
ONLY
220
600 Watt
Jigsaw
$
ONLY
159
550mm Handsaw
• 7 Teeth / 8points per inch.
• Universal toothing for cutting along and
across the grain and with hardpoint teeth
for long lasting sharpness
$
$
• Dramatic improvement in edge
tool sharpening • Sharpen and
hone an edge with an accuracy
previously not possible – much
more easily and faster • Shape
the tool exactly to your needs
• Even complicated shapes such
as fingernail turning gouges,
spoon carving gouges &
oval skew chisels with a
$25 CASHBACK
radiused edge are easily
BY REDEMPTION
sharpened
$
ONLY
539
150mm
Dual Action
Orbital Sander SXE450 Turbo
$
CJ110MVA
• Barrel grip
• Variable speed
• Tool-less blade change
• Chip guard
• Splinter guard
• All alloy base
• Dust collector
• Built in LED light
• 4 stage orbital action –
0 to III enables rapid
and accurate cutting
299
12 Month
Warranty
ONLY
139
Anti Vibration Club
Hammer SJ-AVCLUB40
ONLY
299
76/100mm Belt Sander 9924DB
• Has the versatility to use both 76mm & 100mm belts
depending on the application • Excellent for floor sanding,
cleaning and smoothing off table and bench tops
• Fine adjustment tracking
DEWALT RADIO, LEVEL
WITH DEWALT HOLSTER,
TAPE MEASURE & PENCIL
$
Maxi-Strike Curve Claw Hammer
ONLY
• One piece forged premium steel nail hammer
• Patented arc shaft for maximum access,
also prevents overstrike damage
• Double tempered head
• Engineered for superior balance and feel
• Ideal for formwork
• Available in 16, 20 & 24oz models
43
50
• Heat treated • One piece head
• Patented anti vibration grip
• Riveted grip for extra safety Soft feel ergonomic grip
• Also available 4lb model, SJ-AVCLUB64 - $47.95
ONLY
$
45
Electric Staple/
Brad Nail Gun
2.5HP Plunge
Router
TRE550
• Accepts Staples (6-14mm)
and Brads (12, 15mm)
• Adjustable high/low
power knob
for variable power output
3612
• 1,850Watt motor
• Speed: 22,000rpm
• Weight: 5.8kg
• 1/2” collet capacity
• Complete with
ONLY
accessories
$
339
$
12 Month
Warranty
ONLY
5750
INCLUDES
CARRY CASE & EXTRA
BLADES
1/4” Laminate
Trimmer 3709X
• Rubberised soft grip provides
comfort and control
• Smooth and accurate
ONLY
fine depth adjustment
$
with Rack and Pinion
$
235
TRADE & INDUSTRIAL
PROVEN PERFORMER
BONUS
HANGER BRACKET
ONLY
249
ONLY
$
12 Month
Warranty
12 Month
Warranty
12 Month
Warranty
$
1450
MT370
• Ideal for trimming laminates,
edging, freehand and template
design work
• Transparent base
• Robust and durable aluminium
housing
399
• Quick switching from fine to coarse sanding push button for a 2.8mm or 6.2mm setting
• Unique TurboBooster technology for greater performance
• Intec Dust Extraction unit for cleaner sanding
$
ONLY
ONLY
Laminate Trimmer
ONLY
MOST POPULAR
BELT SANDER
ON THE MARKET
12 Month
Warranty
COMPLETE WITH
DUST BAG &
VERTICAL VICE
NP-22-U7/8-HP
NEW!
110mm Jigsaw
GST75BE
• Cutting depth in wood:
90mm
• Cutting depth in
unalloyed steel: 10mm
• SDS blade and base
changing system
• 4 stage pendulum
action
• Variable speed and
dust extraction
ONLY
379
90mm D Head Strip Nailer
82mm 580 Watt Planer
N1900BK-2
• Power to perform all applications from edging and
chamfering to rebating • Ideal for fast efficient work
• Standard mini reversible T.C.T. blades
• Single pass planing depth of up to 1mm
• Rebating depth up to 9mm • 580 watt motor
519
12 Month
Warranty
NR90AD
• Revolutionary lightweight and compact design
• Well balanced clip head nailer • Moulded rubber grip for
comfortable handling • Tool-less depth adjustment
• Rear load magazine with bypass follower
• Dual function trigger (bump/single shot)
ONLY
$
BY REDEMPTION
69
Multifix
Mitre Guide 33301
•M
easures any corner and
transfers the correct mitre angle
directly to your mitre saw or cutting machine
• Multifix will give you the exact angle for any corner, internal
or external, and convert it to the precise cutting angle
• Set the precise angle on your hand mitre saw (with stepless
locking), power mitre saw or cutting machine.
BONUS
11 Pocket Apron SJ-LPBA10
• Premium oil tanned leather
• Rivet reinforced stress points
• 2 x metal hammer loops
• Measuring tape pouch
• All leather belt
HAMMER, MAG
POCKET LEVEL
ONLY
$
99
6 Pocket Nail Bag
• Premium split leather
• Rivet reinforced stress points
• Adjustable 50mm webbing belt
• Swinging hammer loop and tape clip
$
ONLY
3950
SJ-L45-BONUS
DW389-XE
$
255mm Slide
Compound Saw
LS1013
• Powerful 1430W • 3,700rpm
• Bevel and mitre cuts L & R
• 255mm x 64 tooth TCT blade
10
ONLY
899
12 Month
Warranty
$
305mm
Compound Mitre Saw
DW718-XE
• Compact & lightweight design
• 50/60o left right mitre capacity
• 1600 watt power input
• 960 watt power output
• 305mm blade diameter
ONLY
1049
3 Year Limited
Warranty
$
ONLY
1049
$
235mm
Circular Saw
• 2300 watts
• Weight - 6.0kg
• Depth of cut
@ 90° 87mm,
45° 66mm,
0° bevel capacity
ONLY
229
12 Month
Warranty
305mm Slide
Compound Mitre Saw LS1214
• The deepest cutting capacity of any 305mm
slide saw
•Powerful 1,650W motor with patented gear drive
power and cutting performance
• Dual slide pole linear bearing mounted cutting
head for a smooth and accurate cut
APPRENTICES - SEE US FOR ALL YOUR TOOL REQU I R EM E NT S .
Portable
Mitre Saw Stand UT0691
• Telescopic arms
• Adjustable roller height
• Length adjustable: 1740-3750mm range
• Suits most makes and models
• Foldable legs
DEWALT LEVEL WITH DEWALT
HOLSTER, TAPE MEASURE & PENCIL
VALUED AT $100
BY REDEMPTION
Y E S , W E A C C EP T T O O LS F O R Y O U R T R A D E V O U C H E RS .
$
ONLY
319
3 Year Ltd
Warranty
BONUS
TUNGSTEN BLADE
ONLY
$
N5900B-2
235mm Circular Saw
279
12 Month
Warranty
• Cutting window, to give you a clear view of your line and
the blade • 85mm depth of cut @ 90° • 60mm depth of cut
@ 45° • Bevel locks at front & rear, for total accuracy
• Improved bevel and depth adjustment setting accuracy
• 2000 watt • TCT blade
11
WORKSHOP & WELDING
SEE US FOR ALL YOUR SAFETY NEEDS!
Box of
200
$
$
ONLY
4995
Stealth Earmuffs
AS084022
• Class 5 SLC80 30dB
• Individually adjustable mounting points
• Large soft ear sealing cushions
60
Earplugs Deci4200
(Class 5) AS329606
• In pairs in polybags per box
• Class 5 has 8 hours of protection for up to
110dB Noise Levels per day
• Orange Polyurethane rounded-end, conical
shape, smooth foam plug comfortably expands
in the ear canal to attenuate harmful noise
Mosquito
Earmuffs
$
ONLY
ONLY
1595
$
AS084042
• Plastic Earmuffs
Black and Yellow Ear Cup
Class 3 SLC80 19dB
• Good performance • Fully
dielectric • Weighs 148g
Mustang
Earmuffs
99
NEW!
ONLY
399
1 Year
Warranty
ONLY
$
179
1 Year
Warranty
ONLY
29
AS084026
• Plastic Headband
Earmuffs
• Bright Blue Ear Cups
Class 5 SLC80 29dB
• Durable construction
• Popular, wide frequency
attenuation range
• Weighs 209g
$
$
95
Weldskill 140 Turbo
Manual Arc Welding Machine W1002100
Automatic
Darkening Welding
Helmet NTADF100F
• For general purpose arc & mig welding
• Solar cell - no batteries required
• Auto power off when not in use
• Full face and front of neck protection
• The CIGWELD Weldskill 140 Turbo is a fan cooled home arc
welder that has a welding current range from 40 to 140amps
and is designed to operate from a 240V 15amp power point.
It runs standard general purpose 2.0mm electrodes for light
gauge work, generally less than 3.2mm thick, and 3.2mm
electrodes for heavier materials
Weldskill
600 Argon
Reg 55LPM 210254
Cutskill
Tradesman Plus 208007
• The CutSkill Tradesman Plus Gas Kit is a value
priced outfit for gas cutting, heating and welding
• This fit for purpose kit provides you with all the
components necessary to complete that Oxy/Acteylene
gas cutting or welding job
Quick Action
Clamp
Wall Mounted
Fan 1026
ONLY
199
• 240/50Hz 380 Watt
$
3 speed motor
• 750mm solid steel
3 blade fan
• Heavy duty wall fixing plate
• 0o to 90o oscillating angle or fixed
• Nett weight: 18kg
G Clamp
Super Grade
$
25
• Cast heavy ribbed frame
for strength and durability
• Malleable Iron • Corrosion resistant zinc
plated Whitworth threaded screw, sliding
bar handle and swivel pad
61152 75mm $25, 61153 100mm $27
ONLY
275
$
Heavy Duty Garage Jack
Simply Better
FROM
2019
• 2100kg safe working capacity
• Professional quality
• Height: Min.115mm, Max. 535mm
• Quick lift twin pump design
• Overall dimensions (lowered)
760 (L) x 355(W) x 205 (H)mm
• Quick lift twin pump design
• Nett weight: 47kg
• TG-2K Series
• Heavy Duty Clamps
with a non slip device
for safe and secure
clamping
• Ergonomic two
component
handle
• Easy turning square
acme threaded
spindle
QUALITY MADE
IN GERMANY
FROM
$
200mm Clamp TG20-2K - $26
300mm Clamp TG30S12-2K - $34
600mm Clamp TG60S12-2K - $52
26
$
100mm Plastic
Soft Jaws
Magnetic 22100
ONLY
199
$
$
1695
• Available in standard serrated
face or multigrips face for holding a variety
of round objects in a variety of angles
• Protects work piece from scoring or marking
• Easy to use. Simply place over existing jaws
• Magnetic strip holds jaws in place
Also available 125mm $17.95
$
899
3 Year Limited
Warranty
Transmig
165 706555
• 6 fine welding voltage control settings
• Designed to operate on a 10 amp 240 volt power point
• Welds mild steel, stainless steel & aluminium
• 220/240 volt, 1 phase 50/60 Hz • Reverse polarity for gas/
gasless MIG welding • Industrial ergonomically designed
• Thermal overload protection • MIG torch included
• Fan cooled • Compact and portable
ONLY
105
100mm
Forged Steel Utility Vice
C/W Pipe Jaws & Anvil 60420
• Pipe vice jaws • Large anvil • Manufactured
from forged steel • Machined bearing surface
• Hardened serrated jaws • Corrosion resistant
plated handle • Holds pipe 9.5 to 50mm OD
85
• Based on the renowned Comet design
• Twin gauge configuration allows the operator accurate
flow control detail whilst also providing cylinder contents
pressure
• Conforms with AS4267 Industry standard that ensures it is
manufactured to the highest of quality levels
MAPP
Gas Torch Kit
TS8000BZKC
• Trigger start cast
710000
aluminium
• 8 fine voltage settings
• High intensity, larger
• Heavy duty feed mechanism
flame tip: decreases
• 200 amp max. output
solder time by 30%
• 3m Euro torch
• Lock button for
• Overload protection
continuous operation
• Optimum arc starting feature • Durable cast aluminium
• Spot timer control
torch head, stainless steel
• Large wire spool,
burn tube and
300mm capacity
brass burn tip
Transmig 200
ONLY
Transmig 250
Compact 710007
ONLY
ONLY
$
$
ONLY
1795
3 Year Limited
Warranty
• 240 volt input 250 amp
output
• Gas/gasless operation
• Adjustable burnback
control
• 16 voltage settings
• Supply Voltage: 240 volt,
1 phase 50/60 Hz
• Takes 15kg wire spool
• Supply plug lead: 15 amp
• Welding current range:
30-250 amps
• Maximum Duty Cycle:
30% @ 250 amps
• Power source weight:
91kg
$
ONLY
1155
3 Year Limited
Warranty
IDEAL FOR
BRAZING
ONLY
$
114
Cutskill Plasma
C-35A 240V
OTD1/1635/4
• Precision engineered
consumable parts are
easy to change & require
no tools
• Two modes of operation
available – standoff
cutting or drag cutting
• Light weight,
flexible 6.1m
torch leads
• Latch feature
allows the
cutting arc to
remain active
without constantly
depressing the torch
switch
FROM
$
215
Comweld Silver Brazing Rods
• Choose SBA345T for silver brazing silverware and
all ferrous and non-ferrous metals along with other
applications requiring high corrosion resistance.
A high grade Cadmium free ductile alloy
$
ONLY
1885
12 Month
Warranty
1.6mm 0.5kg pack $315 - 320525
• Or SBA115 has the best high shear strength combined
wtih the lowest operating temperatures for flux free
brazing of copper and copper alloys
2.4mm 1kg pack $215 - 320505
1015
Industrial
Pedestal Fan
1003
Parts Washer 90L
ONLY
199
$
• 90 litre capacity
• Suitable for cleaning of all parts
• 240V pump gives output of 220L p/hr
• Tank size 700 x 500 x 250mm
• Strong steel fabricated design
12
• 240/50Hz 380 watt
• 3 speed motor
• 750mm solid steel
• 3 blade fan
• Cast iron base for
stability
• 0° to 90°
oscillating angle
or fixed
• Adjustable height:
1235 - 1760mm
(blade centre)
• Nett weight: 27.5kg
Weldskill 130 Inverter
$
ONLY
245
150mm Vice Fabricated
Engineers – I Range 60307
• Designed for all heavy duty work
• Manufactured from steel plate • Corrosive
resistant screw • Replaceable case hardened
jaws • Cast iron nut • Precision machined
bearing surface ensuring smooth operation
VISIT US AT www.unitedtools.com.au
$
• The CIGWELD Weldskill 130 Inverter is a 240 volt single
phase welding machine designed specifically for the budget
conscious user. Utilising advanced inverter technology, the
unit offers superior arc characteristics on a range of welding
electrodes from 2.5 to 3.2mm diameter. The unit also features a
DC lift TIG function that provides smooth starting and running
characteristics across a broad range of applications.
ONLY
ONLY
299
Weldskill 130 DC Welding Machine in Toolbox $329 - W1002801
235
60155
Engineering Vice - 125SP
• High strength cast iron body, slide and nut
• Corrosive resistant ACME threaded screw
• Swarf deflector. Forged steel handle
• ‘V’ notched, case hardened, replaceable
jaws • Available in cast iron and also super
grade ductile iron
$
$
ONLY
329
Also available Weldskill 170 Inverter
• Big brother to the Weldskill 130 Amp model, with increased
output and duty cycle for more demanding applications.
The unit also features a DC lift TIG function that provides
smooth starting and running characteristics across a broad
range of applications.
Weldskill 170 DC Welding Machine in Toolbox $399 - W1002901
Cheaper as machine only, without toolbox
S A L ES & S ER V I C E O F A L L M A J O R B R A ND S
ArcMaster
Pro Welding
Helmet 454295
• T he ArcMaster Pro Auto-Darkening Welding Helmet is an
ultra modern product manufactured specifically for welding
comfort, versatility, performance and fume deflection
• The product is designed to offer lightweight construction,
strength, flexibility and heat resistance whilst providing the
wearer with the comfort necessary for a hard days work
13
back Into it! WITH great savings
FatMax 60m
Fibreglass
Long Tape 34.824
10m XL
Power Tape X1410M8
• High impact resistant, bright orange
case
• W
hite blade graduated in mm on both
edges, red markings every 100mm
• Built-in shock absorbing bumper
• Removable belt clip
• Manufactured in
Australia to comply
with Australian
Standards
AS 1290-4-1995
ONLY
$
ONLY
$
ONLY
35
60cm
• Extra wide 19mm blade with 64
fibreglass strands coated in a
clear abrasion resistant polymer
for extra heavy duty strength
• 3.1 geared drive for quick
rewinding on the jobsite
29
ONLY
$
QUALITY MADE
IN GERMANY
$
69
$
Ribbed Box Levels 80A/60
• Permanently fixed vials for long
lasting accuracy
• Suitable for normal and upside
down measuring
80A/80 - 80cm $37.95
80A/120 - 120cm $43
QUALITY MADE
IN GERMANY
49
3495
$
The complete range of BAR
ONLY
Petrol, Diesel and Electric high
$
1199
pressure washers and 1, 2 and 3
motor Commercial Vacuum
Cleaners are now available
through all United Tool Group stores. • Heavy duty 600 Denier Ripstop
polyester material
• 50 pockets of assorted shapes and sizes
• Removable plastic floor • Internal hammer loop
• Zippered external pocket • Two tape measure loops
• Padded handles • Two pockets with hook and loopᵻ
ONLY
• Ideal for both work or recreational use
• Multi-storage pockets
• Includes handy shoulder strap
• Pressure washer with
genuine Honda 6.0 HP GC
engine and Comet BXD2526
piston pump • 9.0 L/min at 2700 psi
(186 bar) • Mounted on an ergonomic
2 wheel scoop frame • Supplied complete
with quality gun and lance, 7.5m of wire
braided rubber hose and nozzle set
ONLY
$
89
Comet Aluminium
120kg Dual
Purpose Ladder
• Interlocking stiles and swaged rung
to stile joint for maximum
resistance to twist and side sway
• Anti-slip feet for added safety
and stability
• Patented convenient side pulley
and rope extension system to
keep rope away from users feet
• Flat tread ‘D’ shaped rungs
for surer footing
• 120kg Load Rating
• From 3-5.2m
• Strong and safe extended
ladder position ensured by
heavy duty locking hinges
and a full step overlapping
construction
• Slightly tapered back legs
provide added stability when
used as a stepladder
• Punchlock® design for
additional torsional rigidity
• Made to Australia and
New Zealand standard
AS/NZS 1892.1Ë
FS20427
Hercules Big Top 120kg
Double Sided Step Ladder
• Extra safe wide ladder and top cap • Industrial duty rating
• Anti-slip feet for stability
Copper Face
Hammer TH312
ONLY
$
$
ONLY
69
Nylon Face
Hammer TH712
• Cast iron head of extra heavy
construction fitted with two pure
electrolytic copper faces and wooden handle.
• Replacement faces available.
• 3lb, 38mm (TH312) $69 or 4lb, 44mm (TH314) $85
$
39
Utility Steel Tray
Wheelbarrow FW71011
• Thorex nylon & plastic hammer with
chrome plated zinc heads.
• 675 grams (1.5lbs), 38mm (TH712) $39
or 900 grams (2lbs), 44mm (TH714) $46
1200 Watt Trade
Extractor AS1202
• I deal for mobile use
•S
uitable for vacuuming dust
and solid particles and
non-flammable fluids
• Smart power point allows
you to run your tool from
the vacuum
$
ONLY
449
ONLY
139
• Powder coated • Sturdy 0.8mm steel tray
• 40mm x 40mm galvanised handles • 95 litre capacity
• Also available Utility Poly Tray Wheelbarrow FW71012 - $139
Industrial
Wet & Dry
Vacuum
Cleaner 7075
• 2 stage fan motor
with 1600W max
power
• 48L stainless steel
tank
• Wide span foot
design with easy
rolling castors
Xtractor
4932 373 501
• The ideal dust extraction
solution
• No more dust on
furniture and carpet
• 99.9% dust free
• Fits all household and
industrial vacuum units
3 YR WARR
Cond Apply
$
ONLY
449
$
14
COME IN AND BENEFIT FROM OUR EXPERT, PERSONALISED SERVICE
ONLY
1495
$
ONLY
799
FS20433
Galaxy 10’
Extension Ladder
• Sturdy diecast frame with permanently
fixed vials for lasting accuracy
• Suitable for normal and upside
down measuring
$
• Top specification electric
pressure washer for domestic use
• 1.6kw single phase motor with
brass pump head for long life
• 8.0L/min at 1975 psi operating pressure
• Complete package for the regular
domestic user including 10m hose
and reel, vario nozzle, turbo nozzle
and foaming
lance with
detergent tank
BAR 2760B-H
Portable
Pressure Washer
FS20020
4950
250mm Magnetic
Trademan’s Level with
Leather Holster 81SM/25+H
Sturdy Work
Bag & Seat KL201
Cold Water
Electric
Pressure
Cleaner
BAR have grown to be a major supplier
of high pressure washers in only 3 Years
by offering very high quality products
at very competitive prices.
Tools not included
Heavy Duty
50 Pocket
Bucket-less Tool
Organiser 49 170180
BAR KSM1480EXT
ONLY
289
$
ONLY
229
52 LOCALLY OWNED AND OPERATED STORES
VICTORIA Airport West Barpet Welding & Engineering Supplies, 52A Hawker St..................
Bayswater United Tools Bayswater, 608 Mountain Hwy ......................................
Coburg
E & I Supplies-United Tools Coburg, 147 Newlands Rd ..................
Dandenong
Audel Power Tools, 119-123 Lonsdale St .............................................
Fairfield Central Power Tools, 455 Heidelberg Rd .............................................
Frankston United Tools (Langfords) Frankston, 34 Wells Rd .............................
Mornington Langford’s Tool Centre, 1 Pentecost Rd ...............................................
South Melbourne Just Tools, 180 Clarendon St ......................................................................
Springvale
Talair Industrial Supplies, 53 Osborne Ave (cnr Awun Crt) ...........
Williamstown Econoweld, 231 Kororoit Creek Rd (cnr Darbyshire St) ................
Ballarat
Elliott’s United Tools, 206 Armstrong St Sth .......................................
Geelong
Corio Machinery Sales, 129 Fyans St, South Geelong ......................
Horsham
Breuers United Tools Horsham, 29 Wilson St ....................................
QUEENSLAND
Geebung
Northside Power Tools, 2/360 Newman Rd ......................................
Hendra
C & L Tool Centre, 459 Nudgee Rd . .....................................................
Lawnton
Air Electric Power Tools, 1/3 Paisley Drive .........................................
Moorooka
Power Tool Services, 10/123 Muriel Ave . ...........................................
Wynnum
Bayside Power Tools, 260 Tingal Rd . .....................................................
Bundaberg
United Tools Bundaberg, 15 Bourbong Street NEW STORE ...
Chinchilla
Wise Gas & Gear Chinchilla, 45 Cooper St .........................................
Gladstone
Wise Gas & Gear Gladstone, 122 Hanson Rd ....................................
Mackay
United Tools Mackay, 26 Victoria St NEW STORE. .....................
MaroochydoreUnited Tools Maroochydore, 125 Sugar Rd NEW STORE........
Morayfield
The Tradesman’s Toolbox, 10 Gaffield St .............................................
Noosa
Noosa Tool Repairs, 5/6 Rene St NEW STORE...........................
Toowoomba Air & Power Tool Centre, 219 Anzac Ave ...........................................
SOUTH AUSTRALIA
Mt Gambier KPA Industrial, 314 Commercial St West .............................................
Penola
KPA Industrial, Old Cemetery Rd ...........................................................
9338 0811
9729 2888
9354 0744
9791 7776
9486 2088
9786 3108
5975 2100
9696 5722
9546 1033
9391 5088
5332 7344
5229 4135
5382 2366
3265 6388
3868 4343
3205 5144
3848 6474
3396 1444
4151 8088
4668 9924
4972 7933
4957 4955
5443 8399
5497 8000
5449 0111
4634 7033
8723 2232
8737 3388
WESTERN AUSTRALIA
Bayswater Power Tools & Machinery Sales, 13 Beechboro Rd Sth ...................
Canning Vale Industrial Power Tool Services, Unit 1/211 Bannister Rd ...............
East Vic Park Toolmart, 804 Albany Hwy (opp Park Centre Shopping Centre)
Joondalup
Toolmart, 71 Winton Rd ...........................................................................
Kelmscott Trade Power, 2874 Albany Hwy ..............................................................
Kenwick Toolmart , 1808 Albany Hwy (cnr Austin Ave). ...................................
Midvale
Toolmart, 321 Great Eastern Hwy .........................................................
O’Connor Toolmart (formerly Alltools), 20 Bowen St .........................................
Osborne Park Toolmart, 455 Scarborough Beach Rd (opp Giant Nissan)..............
Rockingham Toolmart, 107 Dixon Rd ............................................................................
Welshpool Toolmart, 108 Welshpool Rd (cnr Leach Hwy). .................................
Albany United Tools Albany, 36 Sanford Rd ......................................................
Bunbury
Power Tools & Machinery Sales, Unit 1/61 Albert Rd ......................
Bunbury
Toolmart (formerly Cross Electrical), 88 Blair St ...............................
Manjimup
Warren Electrical Service, 7 Rose St ......................................................
9272 3844
9456 3999
9361 8788
9300 0566
9390 9962
9459 6666
9250 2661
9337 2344
9443 2811
9592 3233
9358 0333
9842 1099
9791 1433
9721 5544
9771 1289
NEW SOUTH WALES
Castle Hill
Norwest Tool Centre, Unit A10, 2A Victoria Ave ............................
Lidcombe
De Rossi Industrial, 1/33 Nyrang St NEW LOCATION .........
Liverpool United Tools Liverpool, 10/376 Newbridge Rd NEW STORE
Penrith United Tools Penrith, 5/119 Coreen Ave NEW STORE.............
Coffs Harbour Coffs Harbour Power Tools, 37 Lawson Cres ....................................
Gosford West Gosford Power Tools, 350 Manns Rd ....................................................
Maitland
Maitland Power Tools, 5 Alfred Close ...................................................
Taree Express Agencies, Bays 2 & 3, 19 Elizabeth Ave .................................
9680 8200
8732 7200
9601 0400
4731 1391
6652 2844
4325 5322
4933 6678
6557 7800
A.C.T
Fyshwick
Combined Electrical & Workshop Services, 88 Newcastle St ....... 6280 6844
Sale ends 12 April, 2008 or while stocks last. All prices include GST. We reserve the right to correct any printing errors. We
will attempt to supply out of stock lines at a later date if raincheck is acceptable. Not all items are available at each location. All
accessories shown are not included unless otherwise stated. Higher costs may apply in some country areas due to freight.
V I S I T U S AT w w w .u n i t e dt o o l s . c o m . a u
15
back Into it!
AWESOME
NEW
PRODUCT!
BONUS
ONLY
$
SAFETY VEST WITH
COMPLETE UNIT
Automatic
Level Kit LAL20XKT
119
Powerun
4 Outlet 10amp Safety Board
• Dust and moisture/water resistant (IP53)
• Gasket sealed • Neon activation indicators
• Switch mechanism protected by a neo preen boot
• Inlet membrane protection • Heavy duty power cord
• Class H approved industrial and building site
Also available 15amp
• Automatic Level Kit, X20 includes: Auto
Level, Case, Tripod, 4 Meter Survey Rod
• Magnetically-dampened compensator
• Compensator lock protects instrument
during transport or storage
• The lock can also be used as
a compensator checking tool
• Top-mounted optical peep-sight
for quick reference
• Large, easy to use focusing knob
• Leveling screws
• Weather sealed housing
• 5/8” x 11 tpi thread to fit
ONLY
standard tripods
$
• Includes hard carry case
• Safety orange colour for easy
visibility on building sites
ONLY
$
Distance
Measuring
Tool DLE50
• Easy-to-operate and precise measurement
of lengths, areas and volumes
• Absolute accuracy thanks to
state-of-the-art laser technology
up to a range of 50m
• Mobile phone sized!
399
WIN
THE ULTIMATE
WORKSHOP
Buy any Dewalt
power tool from a
United Tools store
and you’re in the
running to win this
fabulous prize.
Don’t miss out!
See in store for terms and conditions
$
ONLY
1198
12 Month
Warranty
Knee Pads
IR22378
• I-Gel and foam padding provides
optimum knee protection
• Flat tread design provides stable,
shift free grip and traction
$
18 Volt Cordless
Lithium Ion
4pce Combo Kit
• Hammer driver drill (BHP451Z)
• Recipro saw (BJR181RF)
• Circular saw (BSS610Z)
• Torch (BML185)
• Optimum Active 3 charger
(DC18RA)
• 2 x 18V 3.0Ah batteries
(BL1830)
ONLY
5995
As the market leader in the
design, manufacture and
installation of power generation
equipment and control systems,
Advanced Power’s commitment
to reliability and service
guarantees that you receive
dependable quality products
together with after sales back
up and support from a well
established and respected
company that you can rely
on long term.
279
Fitted with Earth
Leakage protection,
weatherproof
outlets and rollover
frame to comply
with WorkCover
requirements
$
8kVA Workmate
Gen Set with Honda
ONLY
1880
APH 8.0 RS1
• Portable 240V single phase petrol
generating sets • 8kVA, 13HP & 6400W
• Rollover frame
(2 scoop frame models available)
• From 2.5 – 13.5kVA, 5.5-24HP and
2000-10800W with genuine Honda
• Battery charging facility
• Electric start models available
$
4 in1 Workstation
ONLY
3688
APH 180 PWR
• Welder/Generator/Compressor/Battery Charger
• Recoil Start • Honda 13hp
• 7kVA Generator • Rollover frame
• 180amp Welder (60% duty cycle)
• 12cfm Compressor (14Lair capacity)
• Battery charging facility • Electric start
models available • 200amp welder &
diesel models also available
VISIT US AT www.unitedtools.com.au
ONLY
Builders
$
1498
Special
240V Single
Phase Petrol Generator
APH2.5RS1BS
• Portable petrol powered 3000rpm
generators
• 240V single phase petrol generating sets
• 2.5kVA, 5.5HP & 2000W
• Available up to 8kVA, 6400W and 13HP
with genuine Honda engines
and electric start options
16