I-TECH INDUCTIVE TECHNOLOGIES, INC.

Transcription

I-TECH INDUCTIVE TECHNOLOGIES, INC.
ELECTRO TECHNIK
I -TECH
INDUCTIVE TECHNOLOGIES, INC.
n
Toroidal and Pot Core Inductors
n
Pot Core Flyback Transformers
n
Drum Core Power Inductors
n
Surface Mount Power Inductors
n
Current Sense Transformers
n
T1/CEPT/ISDN Primary Transformers
n
Surface Mount Toroids
n
Common Mode Chokes
ELECTRO TECHNIK
ELECTRO TECHNIK
Table of Contents
Toroidal and Pot Core Inductors . . . . . . . . . . . . . . . . . . 4
Pot Core Flyback Transformers . . . . . . . . . . . . . . . . . . . 7
Drum Core Power Inductors . . . . . . . . . . . . . . . . . . . . . 8
T1/CEPT/ISDN Primary Transformers . . . . . . . . . . . 13
Surface Mount Toroids . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Surface Mount Power Inductors . . . . . . . . . . . . . . . . . . 19
Common Mode Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Current Sense Transformers . . . . . . . . . . . . . . . . . . . . 28
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
2
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Inductive Technologies (I-Tech) was originally founded
in 1998 when the magnetics division of C&K Components, Inc.
of Watertown, Massachusetts was spun off. In the spring of
2010, Electro Technik Industries, Inc. (ETI) acquired Inductive
Technologies.
With this purchase, ETI obtained a
magnetics company with an extensive
line of standard products. All of the
components are still manufactured in
Costa Rica. Since an Electro Technik
manufacturing facility in San Jose and
I-Tech's were practically neighbors
before the acquisition, the integration
of the two has been made
virtually seamless.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
3
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000 H.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 2
MODEL INDUCTANCE RATED MAXIMUM LEAD
NUMBER AT RATED
CURRENT
DCR
WIRE
CURRENT
@ 25°C
“A”
( H) +/-10%
(A)
(Ohm)
(AWG)
1000.0
0.50
0.650
25
423-0116
423-0117
39.0
0.75
0.100
23
62.0
0.75
0.120
23
423-0118
423-0119
80.0
0.75
0.140
23
423-0120
100.0
0.75
0.160
23
423-0121
133.0
0.75
0.180
23
423-0122
150.0
0.75
0.190
23
423-0123
180.0
0.75
0.210
23
423-0124
200.0
0.75
0.220
23
423-0125
220.0
0.75
0.230
23
423-0126
270.0
0.75
0.250
23
423-0127
330.0
0.75
0.270
23
423-0128
450.0
0.75
0.320
23
423-0129
660.0
0.75
0.380
23
423-0130
39.0
1.00
0.060
22
423-0131
47.0
1.00
0.080
22
423-0132
56.0
1.00
0.090
22
423-0133
68.0
1.00
0.100
22
423-0134
82.0
1.00
0.110
22
423-0135
100.0
1.00
0.120
22
423-0136
120.0
1.00
0.130
22
423-0137
150.0
1.00
0.150
22
423-0138
200.0
1.00
0.170
22
423-0139
250.0
1.00
0.190
22
423-0140
330.0
1.00
0.210
22
423-0142
180.0
1.50
0.026
20
423-0143
22.0
1.50
0.030
20
423-0144
27.0
1.50
0.032
20
423-0145
33.0
1.50
0.035
20
423-0146
40.0
1.50
0.038
20
423-0147
50.0
1.50
0.045
20
423-0148
66.0
1.50
0.050
20
423-0149
100.0
1.50
0.060
20
423-0165
103.0
2.00
0.073
21
•
DIMENSION
“B”
(IN)
“C”
(IN)
.226
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.230
.230
.230
.230
.230
.230
.230
.230
.230
.230
.230
.234
.234
.234
.234
.234
.234
.234
.234
.231
.553
.483
.483
.483
.533
.533
.533
.533
.533
.533
.533
.533
.533
.533
.489
.489
.489
.489
.545
.545
.545
.545
.545
.545
.589
.503
.503
.503
.503
.503
.573
.573
.573
.555
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT
DCR
CURRENT
@ 25 C
( H) +/-10%
(A)
Ohms
125.0
2.0
0.0840
423-0166
423-0167
168.0
2.0
0.0980
423-0168
250.0
2.0
0.1470
423-0176
82.0
3.0
0.0640
423-0177
108.0
3.0
0.0720
423-0178
131.0
3.0
0.0840
423-0179
168.0
3.0
0.0950
423-0186
25.0
5.0
0.0220
423-0187
30.0
5.0
0.0240
423-0188
40.0
5.0
0.0290
423-0189
50.0
5.0
0.0320
423-0190
58.0
0.0350
5.0
423-0201
25.0
7.5
0.0220
423-0202
33.0
7.5
0.0260
423-0203
47.0
7.5
0.0300
423-0216
15.8
10.0
0.0140
423-0217
18.0
10.0
0.0150
423-0231
3.7
15.0
0.0054
423-0232
4.8
15.0
0.0061
423-0233
6.0
15.0
0.0067
423-0234
8.7
15.0
0.0079
423-0235
12.0
15.0
0.0092
423-0249
2.8
20.0
0.0031
423-0250
3.7
20.0
0.0035
423-0251
4.8
20.0
0.0040
423-0252
6.0
20.0
0.0045
423-0265
0.8
25.0
0.0020
423-0266
1.3
25.0
0.0022
423-0267
2.0
25.0
0.0026
423-0268
2.8
25.0
0.0028
423-0269
3.7
25.0
0.0032
423-0279
0.8
30.0
0.0013
423-0280
1.3
30.0
0.0016
423-0281
2.0
30.0
0.0019
DIMENSION
LEAD
WIRE
“A”
“B”
“C”
21
21
22
21
21
21
21
18
18
18
18
18
18
18
18
17
17
16
16
16
16
16
14
14
14
14
14
14
14
14
14
13
13
13
.231
.231
.231
.231
.231
.231
.231
.243
.243
.243
.243
.243
.243
.243
.243
.245
.245
.248
.248
.248
.248
.248
.255
.255
.255
.255
.255
.255
.255
.255
.255
.259
.259
.259
.555
.555
.555
.552
.552
.552
.552
.529
.615
.615
.615
.615
.529
.615
.615
.538
.538
.549
.549
.549
.549
.549
.577
.577
.577
.577
.577
.577
.577
.577
.577
.593
.593
.593
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
4
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Vertical Mount Toroidal Inductors
418 SERIES VERTICAL MOUNT TOROIDAL INDUCTORS
•
Open Frame construction in Vertical
mount with through-hole mounting.
•
Powdered Iron Core
•
High Inductance to space ratio.
MODEL
NUMBER
418-0933
418-0945
Note:
•
•
Low heat and noise (EMI/RFI) emission.
•
Built to meet UL Class B (130C)
requirements.
REFERENCE OPERATING VALUES
DESIGN CONTROL VALUES
(V s)
RATED
CURRENT
(Adc)
NDUCTANCE NO
DC +/- 20%
( H)*
200
200
0.62
0.42
1150
1730
INDUCANCE
VALUE
( H)
MINIMUM ET
1500
2200
MAXIMUM
DCR
(Ohm)
1.00
1.80
Originally designed for use with National Semiconductor’s Simple Switchers Step-Down Voltage
Regulator Series: LM1575-XX/LM2575-XX and LM1577-XX/LM2577-XX.
Measured criteria: 10mV / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
5
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Toroidal and Pot Core Inductors
415 SERIES POT CORE INDUCTOR
•
Inductors from 47 H to 2200 H.
•
Low heat and noise (EMI/RFI) emission.
•
Current ratings from 0.42 A to 3 A.
•
Meets UL Class B (130 C) requirements.
•
High Inductance to space ratio.
MODEL
NUMBER
REFERENCE OPERATING
VALUES
INDUCANCE
VALUE
( H)
MINIMUM
ET
(V s)
RATED
CURRENT
(Adc)
DESIGN CONTROL
VALUES
INDUCTANCE
NO DC +/- 20%
( H)*
MAXIMUM
DCR
(Ohm)
415-0922
220
90
1.30
220
0.070
415-0926
415-0927
415-0928
415-0932
415-0945
330
470
680
47
2200
90
90
90
90
250
1.00
0.95
0.62
3.00
0.42
330
470
680
47
2200
0.110
0.130
0.175
0.022
0.900
415-0930
100
90
3.00
100
0.035
415-0931
415-0933
415-0934
415-0935
415-0936
415-0953
68
1500
1000
680
150
150
90
250
250
250
250
90
3.00
0.62
0.90
1.30
3.00
2.00
68
1500
1000
680
150
150
0.025
0.260
0.250
0.280
0.052
0.040
430-0634
470
250
1.90
470
0.058
430-0635
430-0636
330
220
250
250
3.00
3.00
330
220
0.065
0.040
Note:
DIMENSIONS
+/- 0.030 (0.76)
A
In.
(mm)
B
In.
(mm)
C
In.
(mm)
D
In.
(mm)
1.150
(29.51)
1.150
1.150
1.150
1.150
1.150
0.725
(18.42)
0.725
0.725
0.725
0.725
0.725
0.850
(21.59)
0.850
0.850
0.850
0.850
0.850
0.430
(10.92)
0.430
0.430
0.430
0.430
0.430
1.287
(32.69)
1.287
1.287
1.287
1.287
1.287
1.287
0.880
(22.00)
0.880
0.880
0.880
0.880
0.880
0.880
0.990
(25.15)
0.990
0.990
0.990
0.990
0.990
0.990
0.536
(13.76)
0.536
0.536
0.536
0.536
0.536
0.536
1.750
(44.45)
1.750
1.750
1.220
(30.99)
1.220
1.220
1.414
(35.92)
1.414
1.414
0.790
(20.07)
0.790
0.790
Originally designed for use with National Semiconductor’s Simple Switchers Step-Down Voltage
Regulator Series: LM1575-XX/LM2575-XX and LM1577-XX/LM2577-XX.
* Measured criteria: 0.1V / 10KHz. Models 415-0926, -0927, -0928 are tested with 0.2V / 10KHz .
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
6
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Pot Core Flyback Transformers
•
Pot Core/ Touchtone designs.
•
High Inductance to space ratio.
•
Low heat and noise (EMI/RFI) emission.
•
Built to meet UL Class B (130°C).
MODEL
NUMBER
PRIMARY
INDUCTANCE
INPUT
VOLTAGE
326-0637
330-0202
330-0203
( H)
100 (90-110)
200 (180-210)
250 (240-270)
(V)
5
12
15
•
Originally designed for use with National
Semiconductor’s Simple Switchers. StepDown Voltage Regulator Series:
LM1575-XX/LM2575-XX and
LM1577-XX/LM2577-XX.
•
Hipot tested 500Vdc
DUAL
OUTPUT
VOLTAGE
(V)
+/- 15V
+/- 15V
+/- 15V
MAXIMUM
OUPUT
CURRENT
(mA)
225
575
700
DRAWING
AND
SCHEMATIC
1
2
2
* Measured criteria: 0.1V @ 10kHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
7
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000 H.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 1
MODEL INDUCTANCE RATED MAXIMUM LEAD
NUMBER AT RATED CURRENT DCR
WIRE
CURRENT
@ 25°C
“A”
( H) +/-10%
(A)
(Ohm)
(AWG)
120.0
0.5
0.200
25
423-0107
423-0108
185.0
0.5
0.240
25
200.0
0.5
0.250
25
423-0109
423-0110
240.0
0.5
0.270
25
423-0111
300.0
0.5
0.290
25
423-0112
400.0
0.5
0.340
25
423-0113
500.0
0.5
0.380
25
423-0114
600.0
0.5
0.450
25
423-0115
680.0
0.5
0.550
25
423-0154
5.4
2.0
0.120
20
423-0155
6.8
2.0
0.140
20
423-0156
10.9
2.0
0.180
20
423-0157
12.4
2.0
0.020
20
423-0158
15.9
2.0
0.022
20
423-0159
21.8
2.0
0.025
20
423-0160
26.3
2.0
0.027
22
423-0161
31.2
2.0
0.032
20
423-0162
36.0
2.0
0.034
20
423-0163
51.0
2.0
0.040
20
423-0164
77.0
2.0
0.061
21
423-0169
10.9
3.0
0.012
18
423-0170
15.9
3.0
0.014
18
423-0171
19.7
3.0
0.016
18
423-0172
25.0
3.0
0.028
20
423-0173
34.0
3.0
0.034
20
423-0174
51.0
3.0
0.042
20
423-0175
66.0
3.0
0.047
20
423-0180
4.7
5.0
0.009
18
423-0181
6.9
5.0
0.011
18
•
DIMENSION
“B”
(IN)
“C”
(IN)
.187
.187
.187
.187
.187
.187
.187
.187
.187
.194
.194
.194
.194
.194
.194
.194
.194
.194
.194
.192
.198
.198
.198
.195
.195
.195
.195
.198
.198
.394
.434
.434
.434
.434
.434
.474
.474
.474
.423
.423
.423
.423
.423
.423
.423
.493
.493
.493
.474
.439
.439
.439
.425
.495
.495
.495
.439
.439
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT DCR
CURRENT
@ 25°C
( H) +/-10%
(A)
(Ohm)
9.5
5.0
0.0130
423-0182
423-0183
12.5
5.0
0.0150
423-0184
16.0
5.0
0.0170
423-0185
20.0
5.0
0.0190
423-0194
1.6
7.5
0.0060
423-0195
3.0
7.5
0.0080
423-0196
5.7
7.5
0.0100
423-0197
8.2
7.5
0.0130
423-0198
11.0
7.5
0.0150
423-0199
14.0
7.5
0.0170
423-0200
20.0
7.5
0.0190
423-0205
1.0
10.0
0.0040
423-0206
1.6
10.0
0.0043
423-0207
2.2
10.0
0.0054
423-0208
2.9
10.0
0.0058
423-0209
3.8
10.0
0.0066
423-0210
4.7
10.0
0.0074
423-0211
5.7
10.0
0.0082
423-0212
6.9
10.0
0.0092
423-0213
8.1
10.0
0.0096
423-0214
11.0
10.0
0.0113
423-0215
14.2
10.0
0.0128
423-0227
1.0
15.0
0.0032
423-0228
1.6
15.0
0.0037
423-0229
2.2
15.0
0.0042
423-0230
2.9
15.0
0.0047
423-0246
1.0
20.0
0.0026
423-0247
1.6
20.0
0.0030
423-0248
2.2
20.0
0.0034
LEAD
WIRE
“A”
(AWG)
18
18
18
18
18
18
18
18
18
18
18
17
17
17
17
17
17
17
17
17
17
17
16
16
16
16
15
15
15
DIMENSION
“B”
(IN)
“C”
(IN)
.198
.198
.198
.198
.198
.198
.198
.198
.198
.198
.198
.201
.201
.201
.201
.201
.201
.201
.201
.201
.201
.201
.204
.204
.204
.204
.207
.207
.207
.439
.439
.439
.439
.439
.439
.439
.439
.439
.439
.439
.450
.450
.450
.450
.450
.450
.450
.450
.450
.450
.450
.461
.461
.461
.461
.474
.474
.474
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
8
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000 H.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 2
MODEL INDUCTANCE RATED MAXIMUM LEAD
NUMBER AT RATED
CURRENT
DCR
WIRE
CURRENT
@ 25°C
“A”
( H) +/-10%
(A)
(Ohm)
(AWG)
1000.0
0.50
0.650
25
423-0116
423-0117
39.0
0.75
0.100
23
62.0
0.75
0.120
23
423-0118
423-0119
80.0
0.75
0.140
23
423-0120
100.0
0.75
0.160
23
423-0121
133.0
0.75
0.180
23
423-0122
150.0
0.75
0.190
23
423-0123
180.0
0.75
0.210
23
423-0124
200.0
0.75
0.220
23
423-0125
220.0
0.75
0.230
23
423-0126
270.0
0.75
0.250
23
423-0127
330.0
0.75
0.270
23
423-0128
450.0
0.75
0.320
23
423-0129
660.0
0.75
0.380
23
423-0130
39.0
1.00
0.060
22
423-0131
47.0
1.00
0.080
22
423-0132
56.0
1.00
0.090
22
423-0133
68.0
1.00
0.100
22
423-0134
82.0
1.00
0.110
22
423-0135
100.0
1.00
0.120
22
423-0136
120.0
1.00
0.130
22
423-0137
150.0
1.00
0.150
22
423-0138
200.0
1.00
0.170
22
423-0139
250.0
1.00
0.190
22
423-0140
330.0
1.00
0.210
22
423-0142
180.0
1.50
0.026
20
423-0143
22.0
1.50
0.030
20
423-0144
27.0
1.50
0.032
20
423-0145
33.0
1.50
0.035
20
423-0146
40.0
1.50
0.038
20
423-0147
50.0
1.50
0.045
20
423-0148
66.0
1.50
0.050
20
423-0149
100.0
1.50
0.060
20
423-0165
103.0
2.00
0.073
21
•
DIMENSION
“B”
(IN)
“C”
(IN)
.226
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.230
.230
.230
.230
.230
.230
.230
.230
.230
.230
.230
.234
.234
.234
.234
.234
.234
.234
.234
.231
.553
.483
.483
.483
.533
.533
.533
.533
.533
.533
.533
.533
.533
.533
.489
.489
.489
.489
.545
.545
.545
.545
.545
.545
.589
.503
.503
.503
.503
.503
.573
.573
.573
.555
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT
DCR
CURRENT
@ 25 C
( H) +/-10%
(A)
Ohms
125.0
2.0
0.0840
423-0166
423-0167
168.0
2.0
0.0980
423-0168
250.0
2.0
0.1470
423-0176
82.0
3.0
0.0640
423-0177
108.0
3.0
0.0720
423-0178
131.0
3.0
0.0840
423-0179
168.0
3.0
0.0950
423-0186
25.0
5.0
0.0220
423-0187
30.0
5.0
0.0240
423-0188
40.0
5.0
0.0290
423-0189
50.0
5.0
0.0320
423-0190
58.0
0.0350
5.0
423-0201
25.0
7.5
0.0220
423-0202
33.0
7.5
0.0260
423-0203
47.0
7.5
0.0300
423-0216
15.8
10.0
0.0140
423-0217
18.0
10.0
0.0150
423-0231
3.7
15.0
0.0054
423-0232
4.8
15.0
0.0061
423-0233
6.0
15.0
0.0067
423-0234
8.7
15.0
0.0079
423-0235
12.0
15.0
0.0092
423-0249
2.8
20.0
0.0031
423-0250
3.7
20.0
0.0035
423-0251
4.8
20.0
0.0040
423-0252
6.0
20.0
0.0045
423-0265
0.8
25.0
0.0020
423-0266
1.3
25.0
0.0022
423-0267
2.0
25.0
0.0026
423-0268
2.8
25.0
0.0028
423-0269
3.7
25.0
0.0032
423-0279
0.8
30.0
0.0013
423-0280
1.3
30.0
0.0016
423-0281
2.0
30.0
0.0019
DIMENSION
LEAD
WIRE
“A”
“B”
“C”
21
21
22
21
21
21
21
18
18
18
18
18
18
18
18
17
17
16
16
16
16
16
14
14
14
14
14
14
14
14
14
13
13
13
.231
.231
.231
.231
.231
.231
.231
.243
.243
.243
.243
.243
.243
.243
.243
.245
.245
.248
.248
.248
.248
.248
.255
.255
.255
.255
.255
.255
.255
.255
.255
.259
.259
.259
.555
.555
.555
.552
.552
.552
.552
.529
.615
.615
.615
.615
.529
.615
.615
.538
.538
.549
.549
.549
.549
.549
.577
.577
.577
.577
.577
.577
.577
.577
.577
.593
.593
.593
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
9
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000 H.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 3
MODEL INDUCTANCE RATED MAXIMUM LEAD
NUMBER AT RATED CURRENT DCR
WIRE
CURRENT
@ 25°C
“A”
( H) +/-10%
(A)
(Ohm)
(AWG)
500.0
1.0
0.280
22
423-0141
423-0150
130.0
1.5
0.800
20
160.0
1.5
0.900
20
423-0151
220.0
1.5
0.100
20
423-0152
423-0153
330.0
1.5
0.130
20
423-0191
76.0
5.0
0.044
18
423-0192
87.0
5.0
0.047
18
423-0193
100.0
5.0
0.050
18
423-0204
66.0
7.5
0.040
18
423-0218
21.0
10.0
0.014
16
423-0219
27.0
10.0
0.160
16
423-0220
33.0
10.0
0.018
16
423-0221
40.0
10.0
0.020
16
423-0222
49.0
10.0
0.022
16
•
DIMENSION
“B”
(IN)
“C”
(IN)
.270
.273
.273
.273
.273
.278
.278
.278
.278
.284
.284
.284
.284
.284
.680
.652
.652
.722
.722
.685
.685
.685
.685
.619
.727
.727
.727
.727
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT DCR
CURRENT
@ 25°C
( H) +/-10%
(A)
(Ohm)
16.0
15.0
0.0100
423-0236
423-0237
18.5
15.0
0.0106
423-0238
21.0
15.0
0.0113
423-0253
8.0
20.0
0.0057
423-0254
9.7
20.0
0.0062
423-0270
5.0
25.0
0.0034
423-0271
6.4
25.0
0.0038
423-0272
8.0
25.0
0.0045
423-0282
2.7
30.0
0.0020
423-0283
3.7
30.0
0.0024
423-0284
5.0
30.0
0.0027
423-0285
6.4
30.0
0.0030
423-0286
8.0
30.0
0.0034
LEAD
WIRE
“A”
(AWG)
15
15
15
14
14
13
13
13
12
12
12
12
12
DIMENSION
“B”
(IN)
“C”
(IN)
.284
.284
.284
.290
.290
.294
.294
.294
.298
.298
.298
.298
.298
.632
.748
.748
.647
.647
.663
.663
.663
.680
.680
.680
.680
.680
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
10
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000 H.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 4
MODEL INDUCTANCE RATED MAXIMUM LEAD
NUMBER AT RATED CURRENT DCR
WIRE
CURRENT
@ 25°C
“A”
( H) +/-10%
(A)
(Ohm)
(AWG)
57.0
10.0
0.0240
15
423-0223
423.0224
68.0
10.0
0.0260
15
81.0
10.0
0.0280
15
423.0225
100.0
10.0
0.0300
15
423.0226
423-0239
26.0
15.0
0.0120
14
423-0240
34.0
15.0
0.0137
14
423-0241
42.0
15.0
0.0153
14
423-0242
42.0
15.0
0.0170
14
423-0243
68.0
15.0
0.0200
14
11.2
20.0
0.0061
13
423-0255
423-0256
16.4
20.0
0.0073
13
423-0257
22.5
20.0
0.0085
13
423-0258
26.0
20.0
0.0091
13
423-0259
34.0
20.0
0.0103
13
423-0260
38.0
20.0
0.0110
13
423-0261
47.0
20.0
0.0120
13
•
DIMENSION
“B”
“C”
(IN)
(IN)
0.442
0.442
0.442
0.442
0.445
0.445
0.445
0.445
0.445
0.450
0.450
0.450
0.450
0.450
0.450
0.450
0.944
1.064
1.064
1.064
0.957
0.957
1.073
1.073
1.073
0.975
0.975
0.975
0.975
1.125
1.125
1.125
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT DCR
CURRENT
@ 25°C
( H) +/-10%
(A)
(Ohm)
423-0273
11.2
25.0
0.0050
423-0274
16.4
25.0
0.0060
423-0275
22.6
25.0
0.0070
423-0287
11.2
30.0
0.0040
423-0288
16.4
30.0
0.0048
423-0289
22.6
30.0
0.0056
LEAD
WIRE
“A”
(AWG)
12
12
12
11
11
11
DIMENSION
“B”
“C”
(IN)
(IN)
0.454
0.454
0.454
0.459
0.459
0.459
1.002
1.002
1.002
1.011
1.011
1.200
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
11
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Drum Core Power Inductors
•
Broad range of inductance values; 0.8-1000uH.
•
Very stable inductance over current range.
•
From low to high currents; 0.1 – 30 Amps.
•
Class B (130°C) insulation system.
•
Small PCB space, in 5 standard sizes.
•
Other sizes and values are available.
Size 5
MODEL INDUCTANCE RATED MAXIMUM LEAD
WIRE
NUMBER AT RATED CURRENT DCR
“A”
@ 25°C
CURRENT
(AWG)
(Ohm)
( H) +/-10%
(A)
83.0
15.0
0.0180
13
423-0244
423-0245
100.0
15.0
0.0200
13
56.0
20.0
0.0120
12
423-0262
66.0
20.0
0.0130
12
423-0263
423-0264
77.0
20.0
0.0140
12
•
DIMENSION
“B”
“C”
(IN)
(IN)
.450
.450
.454
.454
.454
1.200
1.200
0.992
1.160
1.160
MODEL INDUCTANCE RATED MAXIMUM
NUMBER AT RATED CURRENT DCR
@ 25°C
CURRENT
(Ohm)
( H) +/-10%
(A)
423-0276
26.4
25.0
0.0064
423-0277
33.7
25.0
0.0072
423-0278
46.2
25.0
0.0084
423-0290
30.0
30.0
0.0068
423-0291
37.6
30.0
0.0076
LEAD
WIRE
“A”
(AWG)
11
11
11
11
11
DIMENSION
“B”
“C”
(IN)
(IN)
0.459
0.459
0.459
0.459
0.459
1.011
1.011
1.200
1.011
1.011
Measured criteria: 1V / 15 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
12
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Primary Transformers T1/CEPT/ISDN
•
Normal temperature range: 0 C to 70 C.
•
Extended temperature range: -40 C to 85 C.
•
Provides 1500Vrms isolation.
•
Designed to match the leading
transceiver chips.
•
Through hole mounting.
Normal Temperature Range
Model
number
Turns ratio
P:S +/-5%
318-3000
318-3001
318-3002
318-3003
318-3004
318-3005
318-3006
318-3007
318-3008
318-3009
318-3010
318-3011
318-3012
318-3013
318-3014
318-3015
318-3016
318-3017
318-3018
1:1:1 (2CT)
OCL@25C
mH, Min
*
1.25
LL
uH Max
Cw/w
pF, Max
DCR Pri
Ohm, Max
DCR Sec.
Ohm, Max
Schematic
Primary
pins
0.50
20
0.65
0.65&0.65
2
1CT:3CT
1.25
0.50
35
0.65
1.55
4
1-2
1-5
1:1
1.25
0.50
20
0.65
0.65
1
1-2
1CT:1
1.25
0.80
20
0.65
0.65
3
1-5
1:1.36
1.25
0.80
30
0.65
0.75
1
5-6
1:1:1.58
0.30
0.60
25
0.40 / 0.40
0.60
2
1-4 (2,3 sh.)
1:1:2
0.80
0.60
25
0.40 / 0.40
0.60
2
1-4 (2,3 sh.)
1:1:2.62
0.80
0.40
25
0.40 / 0.40
0.60
2
1-4 (2,3 sh.)
1CT:2CT
1.25
0.55
25
0.65
1.20
4
1-5
1:2CT
1.25
0.50
35
0.65
1.20
3
2-6
1:2CT
2.00
0.50
35
0.65
1.40
3
2-6
1:4CT
0.50
1.00
35
0.45
1.50
5
1-5
1:1.14CT
1.25
0.80
30
0.65
0.80
5
1-5
1:1.15CT
1.50
0.60
30
0.65
0.90
3
2-6
1:1:1.27
1.50
0.40
30
0.65
0.90
3
2-6
1CT:2CT
1.25
0.55
25
0.65
1.20
4
1-5
1:2.3CT
1.25
0.80
30
0.65
1.20
5
1-5
1:1.36CT
1.25
0.80
30
0.64
0.90
5
1-5
1CT:1CT
1.25
0.80
30
0.75
0.80
4
1-5
DCR Pri
Ohm, Max
DCR Sec.
Ohm, Max
Schematic
Primary
pins
Extended Temperature Range
Model
number
Turns ratio
P:S +/-5%
318-3020
318-3021
318-3022
318-3023
1:1.36
•
OCL@25C
mH, Min
*
1.25
uH Max
0.80
30
0.85
1.25
1
5-6
1:1.15CT
1.50
0.80
35
0.85
1.00
3
2-6
1CT:2CT
1.25
0.60
40
1.00
2.00
4
2-6
1CT:1CT
1.25
1.10
45
1.00
1.00
4
1-5
LL
Cw/w
pF, Max
Measured criteria: 0.1V / 10 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
13
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Toroids
•
518 series utilizes an iron powder core; ideal
for frequency applications up to 100 kHz.
•
618 series utilizes a Kool Mu core;
minimizing core losses and temperature rise
at higher frequencies of 100-250 kHz.
•
Tape and reel packaging.
•
Listed are standard designs. Custom designs
are available in this package.
518 Series Toroids With Iron Powder Cores and 01 Case Size
MODEL
NUMBER
518-R47M-01
518-R68M-01
518-1R0M-01
518-2R0M-01
518-5R0M-01
518-8R0M-01
518-100M-01
518-150M-01
518-200M-01
518-250M-01
518-330M-01
518-500M-01
518-680M-01
518-101M-01
518-151M-01
518-201M-01
518-301M-01
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC
FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD
RESISTANCE
+/-20%
INDUCTANCE CURRENT
RESISTANCE
+/-20%
INDUCTANCE CURRENT
H
H
H
H
A dc
Ohms
Ohms
A dc
0.42
0.56
1.16
2.61
5.11
8.45
9.75
15.80
21.44
26.72
33.82
52.07
68.77
100.32
153.41
205.19
308.20
0.35
0.47
0.73
1.59
3.36
5.30
6.22
9.60
14.10
17.10
22.30
33.60
43.60
63.70
96.70
130.90
191.10
618 Series Toroids With Kool Mu
MODEL
NUMBER
618-R47M-01
618-R68M-01
618-1R0M-01
618-2R0M-01
618-5R0M-01
618-8R0M-01
618-100M-01
618-150M-01
618-200M-01
618-250M-01
618-330M-01
618-500M-01
618-680M-01
618-101M-01
618-151M-01
618-201M-01
618-301M-01
5.50
5.10
4.50
3.40
2.00
1.80
1.70
1.40
1.00
0.96
0.83
0.70
0.66
0.54
0.44
0.36
0.32
0.006
0.007
0.008
0.014
0.040
0.053
0.056
0.088
0.160
0.175
0.252
0.315
0.375
0.558
0.845
1.210
1.530
1.68
2.27
4.46
10.44
20.46
33.82
39.00
63.52
83.57
106.90
135.30
208.28
275.10
401.31
613.64
820.76
1232.80
1.40
1.80
2.92
5.30
13.44
21.20
24.88
38.40
56.40
68.40
89.18
134.40
174.40
254.75
386.78
523.60
760.40
2.75
2.55
2.25
1.70
1.00
0.90
0.85
0.70
0.50
0.48
0.40
0.35
0.33
0.27
0.22
0.18
0.16
0.024
0.026
0.032
0.055
0.160
0.210
0.224
0.350
0.640
0.700
1.008
1.280
1.500
2.232
3.380
4.840
6.120
Cores and 01 Case Size
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD FULL LOAD MAXUMUM DC
RESISTANCE
RESISTANCE
+/-20%
INDUCTANCE CURRENT
+/-20%
INDUCTANCE CURRENT
H
H
H
H
Ohms
Ohms
A dc
A dc
0.40
0.63
0.90
2.00
4.90
8.10
10.00
16.63
19.60
25.60
32.40
50.63
67.60
99.23
152.10
202.50
302.50
0.26
0.40
0.57
1.00
2.65
4.10
4.85
9.40
11.52
16.35
19.85
29.35
39.72
58.70
87.30
107.35
191.40
CIRCUIT
DIAGRAM
5.50
4.50
4.20
4.10
2.30
2.00
1.90
1.10
1.00
0.74
0.72
0.64
0.54
0.44
0.38
0.37
0.22
0.005
0.006
0.007
0.011
0.030
0.040
0.045
0.082
0.145
0.165
0.292
0.365
0.515
0.782
0.965
1.140
1.430
1.60
2.50
3.60
8.00
19.60
32.40
40.00
62.52
78.40
102.40
129.60
202.52
270.40
396.92
608.40
810.00
1210.00
1.06
1.60
2.24
4.00
10.60
16.40
19.39
37.60
46.08
65.40
79.40
117.36
158.87
234.80
349.20
430.60
765.60
2.75
2.25
2.10
2.05
1.15
1.00
0.95
0.55
0.50
0.37
0.36
0.32
0.27
0.22
0.19
0.19
0.11
0.019
0.024
0.028
0.042
0.120
0.160
0.178
0.322
0.580
0.660
1.168
1.460
2.060
3.128
3.860
4.560
5.720
CIRCUIT
DIAGRAM
SAME AS
ABOVE
Kool Mu is a registered trade mark of Magnetics, Inc.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
14
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Toroids
•
518 series utilizes an iron powder core; ideal
for frequency applications up to 100 kHz.
•
618 series utilizes a Kool Mu core;
minimizing core losses and temperature rise
at higher frequencies of 100-250 kHz.
•
Tape and reel packaging.
•
Listed are standard designs. Custom designs
are available in this package.
518 Series Toroids With Iron Powder Cores and 02 Case Size
MODEL
NUMBER
518-R47M-02
518-R68M-02
518-1R0M-02
518-2R0M-02
518-5R0M-02
518-8R0M-02
518-100M-02
518-150M-02
518-200M-02
518-250M-02
518-330M-02
518-500M-02
518-680M-02
518-101M-02
518-151M-02
518-201M-02
518-301M-02
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD FULL LOAD MAXUMUM DC
+/-20%
INDUCTANCE CURRENT
RESISTANCE
+/-20%
INDUCTANCE CURRENT
RESISTANCE
H
H
H
H
A dc
A dc
Ohms
Ohms
0.57
0.83
1.13
2.30
5.18
8.30
10.14
15.50
20.70
25.05
33.21
50.81
67.07
100.18
150.90
203.20
304.17
0.73
0.63
0.85
1.60
3.75
5.70
6.90
10.80
13.45
16.70
21.50
36.40
46.70
70.00
101.80
139.00
199.70
618 Series Toroids With Kool Mu
MODEL
NUMBER
618-R47M-02
618-R68M-02
618-1R0M-02
618-2R0M-02
618-5R0M-02
618-8R0M-02
618-100M-02
618-150M-02
618-200M-02
618-250M-02
618-330M-02
618-500M-02
618-680M-02
618-101M-02
618-151M-02
618-201M-02
618-301M-02
5.90
5.40
5.00
3.90
2.50
2.30
2.10
1.60
1.50
1.40
1.30
0.82
0.76
0.62
0.56
0.46
0.42
0.006
0.008
0.009
0.013
0.030
0.040
0.460
0.082
0.095
0.108
0.125
0.305
0.362
0.540
0.666
0.950
1.175
2.26
3.34
4.52
9.18
20.72
33.20
40.55
62.00
82.60
100.20
132.80
203.25
268.28
400.72
603.60
812.80
1216.65
1.70
2.52
3.40
6.38
14.80
22.60
27.50
43.20
53.60
66.70
85.80
145.50
186.70
280.00
407.00
555.50
798.50
2.95
2.70
2.50
1.95
1.25
1.15
1.05
0.80
0.75
0.70
0.65
0.41
0.38
0.31
0.28
0.23
0.21
0.024
0.030
0.035
0.055
0.126
0.160
0.181
0.330
0.380
0.434
0.500
1.220
1.448
2.160
2.660
3.800
4.702
Cores and 02 Case Size
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD FULL LOAD MAXUMUM DC
+/-20%
+/-20%
RESISTANCE
INDUCTANCE CURRENT
RESISTANCE
INDUCTANCE CURRENT
H
A dc
Ohms
H
Ohms
A dc
H
H
0.45
0.80
1.25
2.45
5.00
8.45
9.80
14.45
20.00
24.20
31.25
51.20
68.45
101.25
151.25
198.45
304.20
0.30
0.52
0.80
1.30
2.80
4.40
4.90
8.10
11.94
15.65
14.84
28.80
39.00
58.40
95.90
122.85
170.90
CIRCUIT
DIAGRAM
6.50
5.50
4.60
4.50
3.00
2.60
2.50
1.70
1.30
1.00
1.40
0.92
0.78
0.63
0.43
0.39
0.38
0.005
0.006
0.008
0.010
0.021
0.027
0.030
0.058
0.106
0.116
0.107
0.212
0.302
0.460
0.560
0.795
1.225
1.80
3.20
5.00
9.80
20.00
33.80
39.20
57.80
80.00
96.80
125.00
204.80
273.80
405.00
605.00
793.80
1216.8
1.18
2.07
3.10
5.20
11.20
17.60
19.60
32.40
47.80
62.60
59.36
115.20
156.00
233.60
383.60
491.40
683.60
3.25
2.75
2.30
2.25
1.50
1.30
1.25
0.85
0.65
0.50
0.70
0.46
0.39
0.32
0.22
0.20
0.19
0.019
0.024
0.030
0.038
0.084
0.107
0.120
0.238
0.424
0.464
0.428
0.848
1.208
1.840
2.240
3.180
4.900
CIRCUIT
DIAGRAM
SAME AS
ABOVE
Kool Mu is a registered trade mark of Magnetics, Inc.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
15
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Toroids
•
518 series utilizes an iron powder core; ideal
for frequency applications up to 100 kHz.
•
618 series utilizes a Kool Mu core;
minimizing core losses and temperature rise
at higher frequencies of 100-250 kHz.
•
Tape and reel packaging.
•
Listed are standard designs. Custom designs
are available in this package.
518 Series Toroids With Iron Powder Cores and 03 Case Size
MODEL
NUMBER
518-R47M-03
518-R68M-03
518-1R0M-03
518-2R0M-03
518-5R0M-03
518-8R0M-03
518-100M-03
518-150M-03
518-200M-03
518-250M-03
518-330M-03
518-500M-03
518-680M-03
518-101M-03
518-151M-03
518-201M-03
518-301M-03
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC
+/-20%
INDUCTANCE CURRENT
RESISTANCE
+/-20%
INDUCTANCE CURRENT
RESISTANCE
H
H
H
H
A dc
Ohms
Ohms
A dc
0.54
0.71
1.12
1.89
5.42
8.70
10.76
16.17
20.70
26.82
35.12
51.78
73.48
109.77
158.60
216.39
319.80
0.37
0.49
0.71
1.23
3.18
4.90
5.80
8.72
13.24
16.10
20.30
33.10
44.08
65.86
90.66
116.80
172.70
618 Series Toroids With Kool Mu
MODEL
NUMBER
618-R47M-03
618-R68M-03
618-1R0M-03
618-2R0M-03
618-5R0M-03
618-8R0M-03
618-100M-03
618-150M-03
618-200M-03
618-250M-03
618-330M-03
618-500M-03
618-680M-03
618-101M-03
618-151M-03
618-201M-03
618-301M-03
6.20
4.70
5.40
4.60
3.20
2.80
2.70
2.20
1.50
1.40
1.30
0.92
0.84
0.68
0.64
0.60
0.50
0.007
0.008
0.009
0.012
0.023
0.031
0.033
0.050
0.111
0.125
0.143
0.277
0.328
0.502
0.624
0.735
1.200
2.19
2.86
4.48
7.57
21.60
34.80
43.00
64.68
82.80
107.50
140.49
207.10
293.93
439.08
634.40
865.50
1276.00
1.48
1.98
2.85
4.92
12.70
19.60
23.20
34.80
52.95
64.60
81.22
132.40
176.32
263.45
363.52
467.20
690.80
3.10
2.85
2.70
2.30
1.60
1.40
1.35
1.10
0.75
0.70
0.65
0.46
0.42
0.32
0.32
0.30
0.25
0.024
0.028
0.034
0.044
0.090
0.120
0.132
0.198
0.442
0.498
0.570
1.108
1.314
2.005
2.486
2.930
4.850
Cores and 03 Case Size
PARALLEL
SERIES
OPEN CIRCUIT MINIMUM
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC INDUCTANCE FULL LOAD
FULL LOAD MAXUMUM DC
+/-20%
INDUCTANCE CURRENT
RESISTANCE
+/-20%
INDUCTANCE CURRENT
RESISTANCE
H
H
H
H
A dc
Ohms
A dc
Ohms
0.40
0.63
0.90
2.00
4.90
8.10
10.00
15.63
19.60
25.60
32.40
50.63
67.60
99.23
152.10
202.50
302.50
0.28
0.43
0.58
1.08
2.60
3.89
4.55
7.50
10.45
16.28
19.41
27.09
36.62
51.36
98.66
121.43
158.19
CIRCUIT
DIAGRAM
6.00
5.00
4.80
4.70
3.00
2.80
2.70
2.00
1.50
0.98
0.96
0.94
0.80
0.70
0.38
0.39
0.40
0.006
0.006
0.007
0.010
0.020
0.025
0.029
0.043
0.077
0.086
0.083
0.241
0.275
0.348
0.430
0.620
0.950
1.60
2.50
3.60
8.00
19.60
32.40
40.00
62.50
78.40
102.40
129.60
202.52
270.40
396.92
608.40
810.00
1210.00
1.12
1.72
2.32
4.32
10.40
15.55
18.20
30.00
41.80
65.12
77.64
108.36
146.48
205.44
394.64
485.70
632.70
3.00
2.50
2.40
2.35
1.50
1.40
1.35
1.00
0.75
0.49
0.48
0.47
0.40
0.35
0.19
0.20
0.20
0.21
0.024
0.028
0.040
0.078
0.100
0.114
0.172
0.310
0.344
0.332
0.960
1.100
1.392
1.720
2.480
3.800
CIRCUIT
DIAGRAM
SAME AS
ABOVE
Kool Mu is a registered trade mark of Magnetics, Inc.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
16
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Toroids
•
518 series utilizes an iron powder core; ideal
for frequency applications up to 100 kHz.
•
618 series utilizes a Kool Mu core;
minimizing core losses and temperature rise
at higher frequencies of 100-250 kHz.
•
Tape and reel packaging.
•
Listed are standard designs. Custom designs
are available in this package.
518 Series Toroids With Iron Powder Cores and 04 Case Size
MODEL
NUMBER
518-R47M-04
518-R68M-04
518-1R0M-04
518-2R0M-04
518-5R0M-04
518-8R0M-04
518-100M-04
518-150M-04
518-200M-04
518-250M-04
518-330M-04
518-500M-04
518-680M-04
518-101M-04
518-151M-04
518-201M-04
518-301M-04
PARALLEL
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD
+/-20%
INDUCTANCE
CURRENT
H
H
A dc
0.49
0.76
1.09
1.95
5.15
7.81
9.88
14.76
20.62
26.65
33.21
48.80
67.37
99.09
149.45
200.11
298.93
0.38
0.56
0.82
1.42
3.55
5.15
6.68
9.50
13.45
17.18
22.92
32.20
43.05
69.55
101.46
131.36
188.05
618 Series Toroids With Kool Mu
MODEL
NUMBER
618-R47M-04
618-R68M-04
618-1R0M-04
618-2R0M-04
618-5R0M-04
618-8R0M-04
618-100M-04
618-150M-04
618-200M-04
618-250M-04
618-330M-04
618-500M-04
618-680M-04
618-101M-04
618-151M-04
618-201M-04
618-301M-04
7.90
7.20
5.90
4.60
3.30
3.00
2.50
2.30
1.90
1.60
1.30
1.20
1.10
0.72
0.64
0.60
0.54
0.33
0.58
0.89
1.13
2.70
3.89
5.11
7.00
11.00
13.00
16.51
25.00
35.40
55.31
77.40
110.58
149.00
0.005
0.006
0.009
0.015
0.028
0.032
0.045
0.055
0.085
0.115
0.165
0.200
0.235
0.567
0.695
0.810
1.005
1.96
3.04
4.36
7.80
20.60
31.22
39.52
59.04
82.48
102.60
132.84
195.20
269.48
396.36
597.80
800.45
1195.70
1.50
2.24
3.26
5.68
14.20
20.60
26.72
38.00
53.80
68.72
91.68
128.80
172.18
278.20
405.80
525.45
752.15
3.95
3.60
3.00
2.30
1.65
1.50
1.25
1.15
0.95
0.80
0.65
0.60
0.55
0.36
0.32
0.30
0.27
MAXUMUM DC
RESISTANCE
Ohms
CIRCUIT
DIAGRAM
0.019
0.024
0.035
0.056
0.110
0.128
0.180
0.225
0.338
0.460
0.660
0.802
0.950
2.261
2.785
3.240
4.020
Cores and 04 Case Size
PARALLEL
OPEN CIRCUIT MINIMUM
INDUCTANCE FULL LOAD
FULL LOAD
+/-20%
INDUCTANCE
CURRENT
H
H
A dc
0.46
0.83
1.30
1.87
5.20
7.48
10.19
15.02
20.80
25.16
32.50
49.97
67.30
100.60
148.80
199.80
300.30
SERIES
OPEN CIRCUIT MINIMUM
FULL LOAD
MAXUMUM DC INDUCTANCE FULL LOAD
+/-20%
INDUCTANCE
CURRENT
RESISTANCE
H
H
A dc
Ohms
7.00
6.00
5.00
5.90
4.40
3.50
3.40
3.00
2.10
2.00
1.80
1.50
1.20
0.92
0.82
0.64
0.62
SERIES
OPEN CIRCUIT MINIMUM
MAXUMUM DC INDUCTANCE FULL LOAD
FULL LOAD
+/-20%
INDUCTANCE
RESISTANCE
CURRENT
H
H
Ohms
A dc
0.003
0.004
0.005
0.006
0.013
0.017
0.020
0.024
0.055
0.064
0.070
0.110
0.156
0.294
0.373
0.550
0.672
1.84
3.32
5.20
7.48
20.80
29.92
40.76
60.08
83.20
100.64
130.00
199.88
269.20
402.40
595.20
799.20
1201.20
1.32
2.32
3.56
4.52
10.80
15.56
20.40
28.00
44.00
52.00
66.04
100.00
141.60
221.24
309.60
442.30
596.00
3.50
3.00
2.50
2.92
2.20
1.75
1.70
1.50
1.05
1.00
0.90
0.75
0.60
0.46
0.41
0.32
0.31
MAXUMUM DC
RESISTANCE
Ohms
0.012
0.018
0.020
0.025
0.052
0.070
0.080
0.096
0.220
0.254
0.272
0.440
0.624
1.173
1.492
2.175
2.688
CIRCUIT
DIAGRAM
SAME AS
ABOVE
Kool Mu is a registered trade mark of Magnetics, Inc.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
17
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
Surface Mount Toroids
18
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Power Inductors
1608 Size
523 SERIES SURFACE MOUNT POWER INDUCTORS
•
Ferrite Bobbin/Drum core.
•
Ideal for Reflow Soldering.
•
High Current capacity.
•
Tape and reel standard packaging.*
•
Compact dimensions.
•
Low resistance and high energy storage.
•
Very stable inductance over current
range.
PART NUMBER
523-1608-1R0M
523-1628-1R5M
523-1608-2R2M
523-1608-3R3M
523-1608-4R7M
523-1608-6R8M
523-1608-100M
523-1608-150M
523-1608-220M
523-1608-330M
523-1608-470M
523-1608-680M
523-1608-101M
523-1608-151M
523-1608-221M
523-1608-331M
523-1608-471M
523-1608-681M
523-1608-102M
Notes: 1.
2.
3.
*
INDUCTANCE
( H)
+/-20%
1.0
1.5
2.2
3.3
4.7
6.8
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
470.0
680.0
1000.0
RATED CURRENT
(A)
2.90
2.80
2.40
2.00
1.50
1.40
1.10
1.20
0.80
0.60
0.50
0.40
0.30
0.25
0.20
0.16
0.15
0.12
0.07
DCR
(Ω)
max.
0.050
0.050
0.070
0.080
0.090
0.130
0.160
0.230
0.370
0.510
0.640
0.860
1.270
2.000
3.110
3.800
5.060
9.200
13.80
SRF
(MHz)
typ.
130.0
115.0
90.0
70.0
50.0
45.0
35.0
30.0
20.0
15.0
14.0
11.0
9.0
6.0
5.5
5.0
4.0
3.0
2.0
Inductance is tested at 100KHz using an HP4284A LCR meter.
DCR is measured using an HP4338A Milliohm meter.
SRF is measured using an HP3577A Network analyzer.
Reel contains 2500 pcs on a 13” reel.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
19
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Power Inductors
3308 Size
523 SERIES SURFACE MOUNT POWER INDUCTORS
•
Ferrite Bobbin/Drum core.
•
Ideal for Reflow Soldering.
•
Compact dimensions.
•
Tape and reel standard packaging.*
•
Very stable inductance over current
range.
PART NUMBER
523-3308-100M
523-3308-150M
523-3308-220M
523-3308-330M
523-3308-470M
523-3308-680M
523-3308-101M
523-3308-151M
523-3308-221M
523-3308-331M
523-3308-471M
523-3308-681M
523-3308-102M
Notes: 1.
2.
3.
*
INDUCTANCE
( H)
+/-20%
RATED CURRENT
(A)
DCR
(Ω)
max.
SRF
(MHz)
typ.
2.00
1.50
1.30
1.10
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.05
0.11
0.15
0.23
0.30
0.39
0.66
0.84
1.20
1.90
2.70
4.00
5.30
8.40
35.0
33.0
25.0
19.0
14.0
12.0
10.0
8.0
6.0
5.0
4.0
3.0
2.5
10
15
22
33
47
68
100
150
220
330
470
680
1000
Inductance is tested at 100KHz using an HP4284A LCR meter.
DCR is measured using an HP4338A Milliohm meter.
SRF is measured using an HP3577A Network analyzer.
Reel contains 1000 pcs on a 13” reel.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
20
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Power Inductors
3316 Size
523 SERIES SURFACE MOUNT POWER INDUCTORS
•
Ferrite Bobbin/Drum core.
•
High Current capacity.
•
Compact dimensions.
•
Very stable inductance over current
range.
Ideal for Reflow Soldering.
•
Tape and reel standard packaging.*
•
Low resistance and high energy storage.
PART NUMBER
INDUCTANCE
( H)
+/-20%
RATED CURRENT
(A)
DCR
(Ω)
max.
SRF
(MHz)
typ.
523-3316-1R0M
523-3316-1R5M
523-3316-2R2M
523-3316-3R3M
523-3316-4R7M
523-3316-6R8M
523-3316-100M
523-3316-150M
523-3316-220M
523-3316-330M
523-3316-470M
523-3316-680M
523-3316-101M
523-3316-151M
523-3316-221M
523-3316-331M
523-3316-471M
523-3316-681M
523-3316-102M
1.0
1.5
2.2
3.3
4.7
6.8
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
470.0
680.0
1000.0
6.8
6.4
6.1
5.4
4.8
4.4
3.9
3.1
2.7
2.1
1.8
1.5
1.3
1.0
0.8
0.6
0.5
0.4
0.3
0.009
0.010
0.012
0.015
0.018
0.027
0.038
0.046
0.085
0.100
0.140
0.200
0.280
0.400
0.610
1.020
1.270
2.020
3.000
100.0
90.0
80.0
65.0
45.0
38.0
30.0
27.0
19.0
15.0
12.0
10.0
9.0
6.0
5.0
4.5
3.5
2.5
2.0
Notes: 1.
2.
3.
*
•
Inductance is tested at 100KHz using an HP4284A LCR meter.
DCR is measured using an HP4338A Milliohm meter.
SRF is measured using an HP3577A Network analyzer.
Reel contains 1000 pcs on a 13” reel.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
21
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Power Inductors
3340 Size
523 SERIES SURFACE MOUNT POWER INDUCTORS
•
Ferrite Bobbin/Drum core.
•
High Current capacity.
•
Compact dimensions.
•
Very stable inductance over current
range.
Ideal for Reflow Soldering.
•
Tape and reel standard packaging.*
•
Low resistance and high energy storage.
PART NUMBER
INDUCTANCE
( H)
+/-20%
RATED CURRENT
(A)
DCR
(Ω)
max.
SRF
(MHz)
typ.
523-3340-100M
523-3340-150M
523-3340-220M
523-3340-330M
523-3340-470M
523-3340-680M
523-3340-101M
523-3340-151M
523-3340-221M
523-3340-331M
523-3340-471M
523-3340-681M
523-3340-102M
10
15
22
33
47
68
100
150
220
330
470
680
1000
3.5
3.0
2.5
2.0
1.6
1.2
1.2
0.9
0.7
0.6
0.3
0.2
0.1
0.040
0.050
0.066
0.080
0.110
0.170
0.220
0.340
0.440
0.700
0.950
1.200
2.000
22.0
18.0
11.0
9.0
8.0
7.0
5.0
4.0
3.5
2.5
2.0
2.0
1.5
Notes: 1.
2.
3.
•
•
Inductance is tested at 100KHz using an HP4284A LCR meter.
DCR is measured using an HP4338A Milliohm meter
SRF is measured using an HP3577A Network analyzer
Reel contains 225 pcs on a 13” reel.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
22
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Surface Mount Power Inductors
5022 Size
523 SERIES SURFACE MOUNT POWER INDUCTORS
•
Ferrite Bobbin/Drum core.
•
High Current capacity.
•
Compact dimensions.
•
Very stable inductance over current
range.
Ideal for Reflow Soldering.
•
Tape and reel standard packaging.*
•
Low resistance and high energy storage.
PART NUMBER
INDUCTANCE
( H)
+/-20%
RATED CURRENT
(A)
DCR
(Ω)
max.
SRF
(MHz)
typ.
523-5022-1R0M
523-5022-2R2M
523-5022-3R3M
523-5022-5R6M
523-5022-100M
523-5022-150M
523-5022-220M
523-5022-330M
523-5022-470M
523-5022-680M
523-5022-101M
523-5022-151M
523-5022-221M
523-5022-331M
523-5022-471M
523-5022-681M
523-5022-102M
1.0
2.2
3.3
5.6
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
470.0
680.0
1000.0
8.60
7.10
6.20
5.30
4.30
4.00
3.50
3.00
2.60
2.30
1.80
1.50
1.20
1.00
0.82
0.72
0.56
0.009
0.014
0.018
0.020
0.031
0.036
0.047
0.066
0.086
0.130
0.190
0.250
0.380
0.560
0.850
1.100
1.800
80.0
80.0
60.0
40.0
30.0
22.0
20.0
15.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.5
2.0
Notes: 1.
2.
3.
*
•
Inductance is tested at 100KHz using an HP4284A LCR meter.
DCR is measured using an HP4338A Milliohm meter
SRF is measured using an HP3577A Network analyzer
Reel contains 250 pcs on a 13” reel.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
23
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Common Mode Chokes
•
Dielectric strength: 1250 Vrms.
•
1 Amp to 15 Amps.
•
Built to meet UL Class B
(130°C) insulation system.
•
0.3 to 125 mH.
•
Windings Balanced within 1%.
PACKAGE 1
MODEL
RATED INDUCTANCE TYPICAL TYPICAL MAXIMUM
NUMBER CURRENT
L
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
(Arms)
(mH)
( H)
(pF)
(Ohm)
1.0
5.0
57
20
0.250
CMC-2001
CMC-2002
1.0
8.0
49
21
0.200
1.0
15.0
82
28
0.285
CMC-2003
CMC-2004
2.0
2.5
29
16
0.090
CMC-2005
2.0
4.0
28
17
0.080
CMC-2006
2.0
7.5
42
20
0.100
CMC-2007
4.0
1.3
15
14
0.035
CMC-2008
4.0
2.1
14
15
0.031
CMC-2009
4.0
3.7
18
19
0.037
CMC-2010
6.0
1.0
12
13
0.026
CMC-2011
6.0
1.7
10
90
0.020
MODEL
RATED INDUCTANCE
NUMBER CURRENT
L
CMC-2012
CMC-2013
CMC-2014
CMC-2015
CMC-2016
CMC-2017
CMC-2018
CMC-2019
CMC-2020
CMC-2021
(Arms)
6.0
9.0
9.0
9.0
12.0
12.0
12.0
15.0
15.0
15.0
(mH)
3.0
0.6
1.1
1.9
0.5
0.8
1.4
0.3
0.6
1.1
TYPICAL TYPICAL MAXIMUM
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
( H)
(pF)
(Ohm)
18
19
0.030
8
11
0.010
8
14
0.011
12
15
0.016
6
10
0.008
6
12
0.007
10
15
0.012
5
9
0.006
4
10
0.005
7
11
0.010
PACKAGE 2
MODEL
RATED INDUCTANCE TYPICAL TYPICAL MAXIMUM
NUMBER CURRENT
L
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
(Arms)
(mH)
( H)
(pF)
(Ohm)
1.0
7.5
70
22
0.300
CMC-2101
CMC-2102
1.0
13.0
125
30
0.400
2.0
3.8
30
16
0.100
CMC-2103
CMC-2104
2.0
6.5
62
29
0.140
CMC-2105
4.0
1.9
17
14
0.042
CMC-2106
4.0
3.3
30
17
0.052
CMC-2107
6.0
1.5
14
16
0.030
PACKAGE
1
2
•
MODEL
RATED INDUCTANCE
NUMBER CURRENT
L
CMC-2108
CMC-2109
CMC-2110
CMC-2111
CMC-2112
CMC-2113
CMC-2114
(Arms)
6.0
9.0
9.0
12.0
12.0
15.0
15.0
(mH)
2.6
0.9
1.5
0.7
1.2
0.5
0.8
TYPICAL TYPICAL MAXIMUM
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
( H)
(pF)
(Ohm)
27
20
0.040
8
14
0.016
15
16
0.020
7
13
0.012
12
17
0.016
6
12
0.008
8
18
0.009
DIMENSIONS
A
B
C
D
E
F
0.40
0.60
0.80
0.90
1.35
1.45
1.20
1.10
0.600
0.800
1.250
1.150
Measured criteria: 10mV / 10 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
24
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Common Mode Chokes
•
Dielectric strength: 1250 Vrms.
•
1 Amp to 15 Amps.
•
Built to meet UL Class B
(130°C) insulation system.
•
0.3 to 125 mH.
•
Windings Balanced within 1%.
PACKAGE 3
MODEL
RATED INDUCTANCE TYPICAL TYPICAL MAXIMUM
NUMBER CURRENT
L
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
(Arms)
(mH)
( H)
(pF)
(Ohm)
1.0
32.0
292
58
0.712
CMC-2201
CMC-2202
1.0
56.0
505
99
0.980
2.0
16.0
140
47
0.270
CMC-2203
CMC-2204
2.0
28.0
280
8
0.370
CMC-2205
4.0
8.0
66
40
0.085
CMC-2206
4.0
14.0
130
51
0.130
CMC-2207
6.0
6.6
52
37
0.060
MODEL
RATED INDUCTANCE
NUMBER CURRENT
L
CMC-2208
CMC-2209
CMC-2210
CMC-2211
CMC-2212
CMC-2213
CMC-2214
(Arms)
6.0
9.0
9.0
12.0
12.0
15.0
15.0
(mH)
11.5
4.0
7.0
3.0
5.2
2.5
4.4
PACKAGE 4
MODEL
RATED INDUCTANCE TYPICAL TYPICAL MAXIMUM
NUMBER CURRENT
L
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
(Arms)
(mH)
( H)
(pF)
(Ohm)
1.0
72.0
900
325
1.280
CMC-2301
CMC-2302
1.0
125.0
800
122
1.145
2.0
36.0
450
123
0.447
CMC-2303
CMC-2304
2.0
62.0
400
101
0.412
CMC-2305
4.0
19.0
290
89
0.265
CMC-2306
4.0
32.0
180
87
0.122
CMC-2307
6.0
15.0
188
89
0.118
PACKAGE
3
4
•
MODEL
RATED INDUCTANCE
NUMBER CURRENT
L
CMC-2308
CMC-2309
CMC-2310
CMC-2311
CMC-2312
CMC-2313
CMC-2314
(Arms)
6.0
9.0
9.0
12.0
12.0
15.0
15.0
(mH)
26.0
10.0
17.0
7.5
13.0
6.0
10.0
TYPICAL TYPICAL MAXIMUM
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
( H)
(pF)
(Ohm)
97
47
0.100
30
29
0.020
64
41
0.052
22
27
0.009
51
31
0.032
18
23
0.004
36
30
0.027
TYPICAL TYPICAL MAXIMUM
LEAKAGE
IWC
DCR
INDUCTANCE
@ 25 C
( H)
(pF)
(Ohm)
165
77
0.116
117
86
0.062
105
70
0.055
87
73
0.042
85
65
0.037
70
71
0.031
64
59
0.027
DIMENSIONS
A
B
C
D
E
F
0.70
0.90
1.20
1.50
1.75
2.05
1.35
2.10
0.900
1.100
1.760
2.280
Measured criteria: 10mV / 10 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
25
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Common Mode Chokes
Package 1
•
Wide Range of currents and
inductances available.
•
0.50 Amps to 4 Amps.
•
0.35 mH to 14.3 mH.
•
Cost effective design.
•
Low interwinding capacitance.
•
Class B (130°C) insulation.
•
3750 Vrms isolation between windings.
320 Series E-Core Common Mode chokes
Package 1
MODEL
NUMBER
MAXIMUM
CURRENT
Lp +/- 25%
(A rms)
(mH)*
MAXIMUM
DCR EACH
WINDING
(Ohm)
320-0545
0.50
14.30
0.800
320-0546
0.75
6.10
0.400
320-0547
1.00
5.32
0.300
320-0548
1.25
3.80
0.210
320-0549
1.50
2.18
0.125
320-0550
2.00
1.13
0.075
320-0551
2.50
0.89
0.055
320-0552
3.00
0.68
0.040
320-0553
3.50
0.50
0.027
320-0554
4.00
0.35
0.023
*
Measured criteria: 10mV / 10 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
26
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Common Mode Chokes
Package 2
•
Wide Range of currents and
inductances available.
•
0.50 Amps to 4 Amps.
•
0.35 mH to 14.3 mH.
•
Cost effective design.
•
Low interwinding capacitance.
•
Class B (130°C) insulation.
•
3750 Vrms isolation between windings.
320 Series E-Core Common Mode chokes
Package 2
MODEL
NUMBER
MAXIMUM
CURRENT
Lp +/- 25%
(A rms)
(mH)*
MAXIMUM
DCR EACH
WINDING
(Ohm)
320-0556
0.50
8.28
0.850
320-0557
0.75
6.20
0.600
320-0558
1.00
2.98
0.325
320-0559
1.25
2.07
0.225
320-0560
1.50
0.92
0.130
320-0561
2.00
0.58
0.080
320-0562
2.50
0.45
0.056
320-0563
3.00
0.33
0.040
320-0564
3.50
0.23
0.030
320-0565
4.00
0.15
0.025
*
Measured criteria: 10mV / 10 KHz.
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
27
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Current Sense Transformers
CSI SERIES WITHOUT PRIMARY TURN
•
Designed for switching power supply
applications.
•
Minimum material thickness from hole I.D to coil is
0.50mm.
•
Frequency range of 20 KHz and
higher.
•
Molded construction with through-hole for primary
lead.
MODEL
NUMBER
SECONDARY
MINIMUM
TURNS
SECONDARY
INDUCTANCE
mH
I
PEAK
A
CSI-0050
50
5.0
20
CSI-0100
100
20.0
20
CSI-0200
200
80.0
20
CSI-0050-CT
50 CT
5.0
20
CSI-0100-CT
100 CT
20.0
20
CSI-0200-CT
200 CT
80.0
20
CSI-0300-CT
300 CT
180.0
20
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
28
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Current Sense Transformers
CST SERIES WITH ONE SINGLE TURN PRIMARY
•
Single primary turn included.
•
3750 Vrms primary to secondary hi-pot
tested.
•
Designed for switching power supply
applications.
•
Frequency range of 20 KHz and higher.
•
Transformer meets IEC950 insulation
requirements.
•
Encapsulated construction.
MODEL
NUMBER
SECONDARY
MINIMUM
TURNS
SECONDARY
INDUCTANCE
mH
I
PEAK
A
CST-0050-1T
50
5.0
20
CST-0100-1T
100
20.0
20
CST-0200-1T
200
80.0
20
CST-0050-1TCT
50 CT
5.0
20
CST-0100-1TCT
100 CT
20.0
20
CST-0200-1TCT
200 CT
80.0
20
CST-0300-1TCT
300 CT
180.0
20
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
29
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Current Sense Transformers
CST SERIES WITH TWO SINGLE TURNS PRIMARIES
•
Two individual primary turns included.
•
3750 Vrms primary to secondary hi-pot
tested.
•
Designed for switching power supply
applications.
•
Frequency range of 20 KHz and higher.
•
Transformer meets IEC950 insulation
requirements.
•
Encapsulated construction.
MODEL
NUMBER
SECONDARY
MINIMUM
TURNS
SECONDARY
INDUCTANCE
mH
I
PEAK
A
CST-0050-2T
50
5.0
20
CST-0100-2T
100
20.0
20
20
CST-0200-2T
200
80.0
CST-0050-2TCT
50 CT
5.0
20
CST-0100-2TCT
100 CT
20.0
20
CST-0200-2TCT
200 CT
80.0
20
CST-0300-2TCT
300 CT
180.0
20
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
30
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
ELECTRO TECHNIK
Current SenseTransformers
TR- SERIES, FOR 50/60 and 400 Hz APPLICATIONS
•
Low Cost.
•
5 standard turns ratios.
•
Vertical PCB Mounting.
•
Minimum material thickness from hole I.D to
coil is 0.80mm.
•
Molded construction with through-hole for
primary lead.
MODEL
NUMBER
SECONDARY
TURNS
MAXIMUM
PRIMARY
CURRENT
AMPS (RMS)
TR-3025-PC
300
100
TR-5025-PC
500
100
TR-10025-PC
1000
100
TR-20025-PC
2000
100
TR-30025-PC
3000
100
Phone: 727-532-4459
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
31
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK
Electro Technik
Companies
Capacitive Products
Arizona Capacitors, Inc.
3151 E. Drexel Road
Tucson, AZ 85706
tel: 520-573-0221 fax: 520-573-0520
sales@arizonacapacitors.com
www.arizonacapacitors.com
Wound Film Capacitors and
Electronic Filters
n
Microwave Products
Res-Net Microwave, Inc.
P.O. Box 18802
Clearwater, FL 33762
tel: 727-530-9555 fax: 727-535-3508
res_sales_service@electrotechnik.com
www.res-netmicrowave.com
n
RF/Microwave Resistors, Attenuators,
Terminations
Wavetronix Corp.
P.O. Box 18802
Clearwater, FL 33762
tel: 727-530-9555 fax: 727-535-3508
wave_sales_service@electrotechnik.com
www.wavetronix-eti.com
n
RF/Microwave Cable Assemblies and
Semi-Rigid Coaxial Cables
Magnetics Products
Resistive Products
Hytronics Corp,
P.O. Box 18802
12449 Enterprise Blvd.
Largo, FL 33773
tel: 727-535-0413 fax: 727-531-1592
hy_sales_service@electrotechnik.com
www.hytronicscorp.com
Tepro
P.O. Box 1260
12449 Enterprise Blvd.
Largo, FL 33773
tel: 727-796-1044 fax: 727-791-7425
tep_sales_service@electrotechnik.com
www.tepro-vamistor.com
n
Power Transformers and
Power Inductors
n
Raycom Electronics, Inc.
P.O. Box 250
1 Raycom Rd.
Dover, PA 17315
tel: 717-292-3641 fax: 717 292-2919
Duane Goodling/Customer Service
www.raycomelectronics.com
n
Wirewound and Metal Film
Resistors
Vamistor
P.O. Box 1260
Clearwater, FL 33757
tel: 727-796-1044 fax: 727-791-7425
tep_sales_service@electrotechnik.com
www.tepro-vamistor.com
n
Carbon Film and RL 42 Resistors
Custom Military and Avionics Magnetics
Goguen Industries
3151 East Drexel Road
Tucson, AZ 85706
ttel: 520-573-0221 fax: 520-573-0520
e-mail -- sales@goguenindustries.com
www.goguenindustries.com
n
Specialty Inductors, Transformers,
and Air Coils
Inductive Technologies, Inc. (I-Tech)
P.O. Box 18802,
Clearwater, FL 33762
tel: 727-532-4459
toll free: 800-961-6295
fax: 727-535-3508
www.inductech.com
n
Standard Catalog Inductors and
Transformers
Winatic Corp.
12449 Enterprise Blvd.
Largo, Fl 33773
tel: 727-538-8917 fax: 727-531-1592
win_sales_service@electrotechnik.com
www.winatic.com
n
Transformers and Inductors for
Medical Devices and Equipment
I - TECH
Phone: 727-532-4459; 1-800-961-6295
Fax: 727-535-3508
P.O. Box 18802, Clearwater, FL 33762 n
I -TECH
Inductive Technologies, Inc.
ELECTRO TECHNIK
ELECTRO TECHNIK